elcometer 204-steel-ultrasonic-gauge-datasheet-multilabindia-chennai
TRANSCRIPT
www.elcometer.com
Datasheet
D F T , Fineness of Grind, Density,
Flow Cups, Viscosity, Flash Point, Film Applicators, Washability and
Abrasion Testers, Hardness, Impact & Bend Testers, Gloss, Colour, Material Thickness
Surface Profile, Wet Film, Climatic Testing Coating Thickness Gauges, Adhesion
Pinhole Testers, Porosity Detectors, Software Dispersion, Inspection Kits, Zahn Cups, Viscosity Motorised Film Applicators, Drying Time Recorders Washability, Abrasion, Hardness, Elasticity and Deformation, Appearance, Material Thickness Surface Cleanliness, Dewpoint Meters
Wet Film Combs, Dry Film Thickness Cross-Hatch, Pinhole & Porosity, PIGs
DOI Meters, Scratch Testers Moisture, Oven Recorders
ElcoMaster™
DFT Fineness of Grind, Density Flow & Dip Cups Rotational Viscosity Flash Point, Impact Testers Washability & Abrasion Testers Film Applicators, Bend Testers, Gloss
Thickness Gauges, Surface Profile, Wet Film Dry Film, Coating Thickness Gauges
Climatic Testing, Adhesion, Pinhole Testers Porosity, Software, Dispersion, Inspection Kits
Zahn Cups, Motorised Film Applicators Drying Time Recorders, Washability, Abrasion
Scratch & Hardness, Elasticity & Deformation Surface Cleanliness, DOI Gloss Meters
Colour, Moisture, Dewpoint Meters Cross-Hatch, Oven Recorders
Surface Contamination ElcoMaster TM
www.elcometer.com
ENGLANDElcometer LimitedManchester M43 6BUTel: +44 (0)161 371 6000Fax: +44 (0)161 371 6010e-mail: [email protected]
FRANCEElcometer Sarl45430 BouTel: +33 (0)2 38 86 33 44Fax: +33 (0)2 38 91 37 66e-mail: [email protected]
USAElcometer IncRochester Hills Michigan 48309Tel: +1 248 650 0500Toll Free: 800 521 0635Fax: +1 248 650 0501e-mail: [email protected]
GERMANYElcometer Instruments GmbHD-73431 AalenTel: +49(0)7361 52806 0Fax: +49(0)7361 52806 77e-mail: [email protected]
REPUBLIC OF SINGAPOREElcometer (Asia) Pte LtdSingapore 589472,Tel: +65 6462 2822Fax: +65 6462 2860e-mail: [email protected]
BELGIUMElcometer SAB-4681 Hermalle /s ArgenteauTel: +32 (0)4 379 96 10Fax: +32 (0)4 374 06 03e-mail: [email protected]
JAPANElcometer KKNisso Dai 23 Building, Room 804, 3-8-25, Toranomon, Minato-ku,Tokyo 105-0001Tel: +81-3-6869-0770Fax: +81-3-6809-1442e-mail: [email protected]
THE NETHERLANDSElcometer NL3584 BH UtrechtTel: +31 (0)30 210.7005Fax: +31 (0)30 210.6666email: [email protected]
Elcometer 204Steel Thickness Gauge
www.elcometer.com
Datasheet
Steel Thickness Gauge
Pre-calibrated for ease of use, the Elcometer 204 Steel Ultrasonic Thickness Gauge provides a fast, accurate measurement of the thickness of steel.
Each gauge is supplied with an integrated steel “zero” plate to ensure the greatest accuracy. Supplied with a transducer & ultrasonic couplant, simply switch on the gauge and take readings. The inbuilt backlight allows measurements in low light conditions.
• Supplied with everything required for use• Low cost and easy to use• Measure material thickness when there is access to only one side
Elcometer 204
Technical Specification
Part Number Description CertificateC204----1 Elcometer 204 Steel Ultrasonic Thickness Gauge ●Maximum Measurement Range 0.63mm to 199.99mm or 0.025” to 19.999” (switchable)Accuracy ±2% of reading or ±0.5mm (0.02”), depending on material and conditionsResolution 0.01mm (0.001”)
Weight 295g (10oz) including batteries Dimensions 63 x 120 x 31mm (2.5 x 4.5 x 1.24”)Units Millimetres and InchesOperating Temperature -30°C to 50°C (-20°F to 120°F) depending on climatic conditionsCase Extruded aluminium body, nickle plated aluminium end capsBattery Life 200 hours continuous use (alkaline dry batteries)Battery Type 2 x LR6 (AA), alkaline dry batteriesPacking List Elcometer204SteelUltrasonicGauge,transducer,calibrationcertificate,ultrasoniccouplant,
2 x batteries, carry case and operating instructions
STANDARDS:ASTM E 797, EN 15317
C
Accessories
T92015646 Transducer: Potted Right Angle 5.0MHz, 6.4mm (¼”) TransducerT92015701 UltrasonicCouplant-120ml(4floz)BottleT92015874X High Temperature Ultrasonic Couplant - 4 oz TubeT92015617 Instrument Carry CaseT9205243- Test Wedge: 2 - 25mm (0.07 - 0.98”) in 6 StepsT9205270- Test Wedge: 30 - 100mm (1.18 - 3.93”) in 8 Steps
● CalibrationCertificatesuppliedasstandard.● CalibrationCertificatesuppliedasstandard.
PEMode
www.elcometer.com
Datasheet
Related Products
Elcometer 205 Basic Ultrasonic Thickness Gauge
The Elcometer 205 is a robust, hand-held ultrasonic thickness gauge that allows you to make reliable measurements or scan a length of material for defects, for the thinnest point.
Elcometer 208 & 208DL Ultrasonic ThruPaint™ Thickness Gauge
Ultrasonic Thickness Gauges are capable of measuring material thickness whilst eliminating the thickness of the coating (on metal substrates only). The Elcometer 208DL has data logging capability and data can be transferred onto PC.
Elcometer 207 & 207DL Precision Ultrasonic Thickness Gauge
Precision Ultrasonic Gauges are designed to provide accurate measurements on thin materials including cast iron, plastic, steel, glass, aluminium and thin plastics. The Elcometer 207DL is able to store 1000 readings in 10 batches.
Elcometer 206 & 206DL Ultrasonic Thickness Gauge
Ultrasonic Thickness Gauges have three calibration options can be used for measuring many different materials including steel, cast iron, plastic, epoxy resin,glassfibreetc.