ELECTRICAL CIRCUITS

All you need to be an inventor is a good imagination and a pile of junk.

-Thomas Edison

OHM’S LAW

I = V / R

Georg Simon Ohm (1787-1854)

I = Current (Amperes) (amps)

V = Voltage (Volts)

R = Resistance (ohms)

How you should be thinking about electric circuits:Voltage: a force that pushes the current through the circuit (in this picture it would be equivalent to gravity)

Resistance: friction that impedes flow of current through the circuit (rocks in the river)

How you should be thinking about electric circuits:

Current: the actual “substance” that is flowing through the wires of the circuit (electrons!)

How you should be thinking about electric circuits:

WOULD THIS WORK?

WOULD THIS WORK?

WOULD THIS WORK?

THE CENTRAL CONCEPT: CLOSED CIRCUIT

circuit diagramcircuit diagram

cell switch

lamp

wires

Scientists usually draw electric circuits using symbols;

SIMPLE CIRCUITS

• Series circuit• All in a row• 1 path for

electricity• 1 light goes out and

the circuit is broken

• Parallel circuit• Many paths for

electricity• 1 light goes out and the

others stay on

1

2

3

PARALLEL CIRCUIT

• Place two bulbs in parallel. What do you notice about the brightness of the bulbs?

• Add a third light bulb in the circuit. What do you notice about the brightness of the bulbs?

PARALLEL CIRCUIT

• Remove the middle bulb from the circuit. What happened?

measuring current

Electric current is measured in amps (A)

using an ammeter connected in series in

the circuit.

A

measuring current

A A

This is how we draw an ammeter in a circuit.

SERIES CIRCUIT PARALLEL CIRCUIT

measuring voltage

The ‘electrical push’ which the cell gives to the

current is called the voltage. It is measured in

volts (V) on a voltmeter

V

measuring voltage

V

This is how we draw a voltmeter in a circuit.

SERIES CIRCUIT PARALLEL CIRCUIT

V

measuring currentSERIES CIRCUIT

PARALLEL CIRCUIT

• current is the same

at all points in the

circuit.

2A 2A

2A

• current is shared between the components

2A2A

1A

1A

fill in the missing ammeter readings.

?

?

1A

1A

1A

3A?

?

1A

?

3A

1A

1A

The circuit is no longer complete, therefore current can not flow

The voltage decreases because the current is decreased

and the resistance increases.

The overall current increases. The total resistance drops in a parallel circuit as more bulbs are added. The individual current remains the same.

The current increases.

SERIES AND PARALLEL CIRCUITS

• Series Circuits• only one end of each component is connected• e.g. Christmas tree lights

• Parallel Circuits• both ends of a component are connected• e.g. household lighting

Different cells produce different voltages. The

bigger the voltage supplied by the cell, the bigger

the current.

measuring voltage

Unlike an ammeter, a voltmeter is connected

across the components

Scientist usually use the term Potential

Difference (pd) when they talk about voltage.

series circuit

1.5V

• voltage is shared between the components

1.5V

3V

• voltage is the same in all parts of the circuit.

3V

parallel circuit

3V

3V

measuring current & voltage

copy the following circuits on the next two slides.

complete the missing current and voltage readings.

remember the rules for current and voltage in series and parallel circuits.

measuring current & voltage

V V

6V4A

A

A

a)a)

measuring current & voltage

V

V

6V4A A

A

A

b)b)

answers

3V 3V

6V

4A 4A6V

6V

6V4A 4A

2A

2A

4A

a)a) b)b)