electrical safety equipments ppe low voltage presentation sfe in uae

SAFETY AND MAINTENANCE SOLUTIONS FOR NETWORK ELECTRICIANS

GENERAL PRESENTATION

■ THE NOVARC GROUP – ESP DIVISION

1/ To protect operators against electrical risks to work in total confidence on the network

2/ To provide secured, easy to use and reliable products

3/ To improve maintenance and operations on the network


■ THE NOVARC GROUP - ESP DIVISION

PRODUCTION COMMERCIALISATION



Key figures



Our know how

100% Products design and made in France

Compliance with the EN and IEC standard

More 60 years experience in electrical safety equipments

MAINTENANCE AND OPERATION ON THE LOW VOLTAGE NETWORK

UNDERGROUND OPERATIONS

OVERHEADLINE OPERATIONS

RANGES OF PRODUCTS

RANGES OF PRODUCTS

■ CLIMBING EQUIPMENTS

RANGES OF PRODUCTS

■ ANTI-FALL PROTECTIVE EQUIPMENTS

RANGES OF PRODUCTS

■ ARC FLASH PROTECTION

RANGES OF PRODUCTS

■ LOW VOLTAGE DETECTOR

TAG780D

Two probes designed for comfortable

handling with gloves

Slim probes

Test Bouton suitable for electrician’s gloves

Silicone double insulated lead

CAT IV 1000V CAT IV 1000V IP65IP65DIGITALDIGITAL

LV Detector TAG 780D

LEDs Digital display

Go / No Goindication

■ Functions of the LV detectorFunctions of the LV detector

Hazardous voltage light & sound indication : above 50V AC 120V DC ;

Redundant measurement batteries Circuit w/o Unipolar Phase indication on the 2

probes (NEUTRAL FAILURE detection) PHASE SEQUENCE (field rotation)

compatible with Gen Set

Indication of Voltage levels 120V 230V 400V 1000V

Voltage display from 5 V to 999 V (3 digits)

POLARITY indication on DC CONTINUITY test < 100 Ω AC or DC indication TEST BUTTON


Every function compatible with electrician gloves

Display Display accuracy: +/-2% + 1digit Display Resolution : 1V Standard : IEC 61243-3 = 2010 Batteries 2 x 1,5V LR03 (AAA)

■ Specifications of the LV detectorSpecifications of the LV detector

Field of Use Voltage range 5V - 1000 V AC ; 5V –

1500V DC Nominal Voltage indications : 120,

230, 400 et 1000V AC DC Operating current < 3.5 mA 1000V cat. IV Frequency range for AC: 15 Hz to 60

Hz Temperature : - 15°C + 45°C


■ Standard and EnvironmentStandard and Environment

LV DETECTOR TAG 780D

Low voltage detector with digital display TAG 780DTwo-pole Low-Voltage Detector Standard IEC 61243-3 (2009-11) Main purpose:

Proving Dead = Checking the absence of operating voltage before connecting earthing device. Technical Specific feature :

the device are equipped with a « low impedance » circuit to drain residual current and make the difference with operating voltage. (vs. Multimeters with ultra high impedance). 100% Availability to secure safety mission: NO Fuse but reversible variable resistors Redundant circuit for Hazardous voltage indication operating w/o battery.

LV Phase rotation Indicator DR 706


Ergonomically shaped to fit comfortably in the palm

Replaceable leads with European colour codes and L1/L2/L3 marking (other markings or colours to order).Probes with HPC fuses : Ø 4 mm –IP2X

Heavy duty waterproof housingCan be used in all weathersProtection : IP65 housing and circuit totally sealed with compround

Unique bright LED displayChasing red LEDs for the counter-clockwise rotation.

■ Functions of the LV Phase rotation IndicatorFunctions of the LV Phase rotation Indicator


PHASE ROTATION / SEQUENCE TESTER INDICATOR

■ Specification of the Phase rotation IndicatorSpecification of the Phase rotation Indicator


Voltage range : 80V to 400 V AC AC frequency range : 50 Hz & 60 Hz Maximum rated voltage : 440 V three phase system Category of use : cat. IV (network) Class : N = - 10°C to + 55°C



Category of use : cat. IV (network)

Probes with HPC fuses : Ø 4 mm –IP2X

Protection : IP65 housing and circuit totally sealed with campound

LV DEAD UNDERGROUND NETWORK

■ EARTHING and SHORT-CIRCUITING

LV Live Underground Cable Identifier FC5300

LV Live Cable Identifier FC5300


Heavy duty sealed case Instructions always visible to guide the user step by step

Reliable connectors : double-insultated, sheathed, sheathed conductors, in accordance with new standards

Directional probe allows certain identification of the cable

Clear Identification

Connection of the most universal identification signal and phase generator (modulator) possible on the customer’s network or in a connection bos


■ Functions of the LV Live Cable IdentifierFunctions of the LV Live Cable Identifier

Identification of Low Voltage live cables :- In order to make a live connection- Prior to de-energized operation

Didactic operating mode present on the modulator Secured identification : The device indicates that it has identified the

cable through a cross checking of frequencies and signal patterns. Signal identification is secure due to current drawing method and digital

signature : no signal on the adjacent cables or on MV cables Overhead and underground cables “Paper-lead”, “dry”, “double steel armouring” cables. Urban, suburban and rural areas


■ Specifications of the LV Live Cable IdentifierSpecifications of the LV Live Cable Identifier

FC5300E modulator : Nominal voltage 220 V rms to 400 V rms three

phase, bi phase or single phase Maximum rated voltage 440 V rms between inputs Network frequency 50 Hz or 60 Hz to be specified Number of channels 2 Duration of tapping per channel 0.256 s (per cycle) Pulse cycle 0.16 Hz Rms tapping current ~4 A/channel during impulse Peak current under 230 V or 400 V ~16 A peak



Inputs protection : fast-acting HRC fuses in the housing and at the IP2X leads connecting points

Overvaltage Category : 1000 V – Cat.IV Operating temperature - 20°C to + 40°C Forced ventilation 2 + 2 fans Max. temperature protection by switching off the tapping : 90°C ±3� Approximate dimensions : 470 x 360 x 190 mm Approximate mass 9.85 kg



FC5300D detector : Power suply battery 3.7 V (Lithium-ion) Autonomy over 1000 detections Display screen LCD 128 x 64 backlight Battery level check battery level indication Choice of functions by dedicated buttons Automatic standby and power cut-off Menus available in 6 languages External magnetic probe Analyser DSP/ARM + PIC



Approximate dimensions 160 x 95 x 50 mm Approximate mass 0.35 kg (with battery) Battery charger USB type, mains and vehicle Protection shockproof rubber-type shell

FC5k3SD probe : Receiving sensor magnetic, differential 3 sensitivities according to the type of cable Protection by shockproof “rubber” positioning shoe



Compliant and qualified to EDF-Serect specification ST BT 840C (2000-11)

CE marking Compliant with European Directives : Relating to electromagnetic compatibility (EMC Directive)89/336/EEC, 92/31/EEC, 93/68/EEC et 92-587/RF, 95-283/RFstandard EN 55011 edition 2009 + A1/2010 Relating to safety of low-voltage equipment (LV Directive)73/23/EEC et 75-848/RFstandards IEC/EN 61010-1 ed. 3.0 (2010-06)

IEC/EN 61010-031 ed.1.1 (2008-06)

LV DEAD LINE NETWORK

■ EARTHING and SHORT-CIRCUITING

LV UNDERGROUND & OVERHEADLINE NETWORK

■ DETECTION AND EARTHING INSULATING STICKS

LV LIVE WORKING

■ INSULATED/INSULATING TOOLS 1000 V

RANGES OF PRODUCTS

■ CABLE PREPARATION TOOLS

LV LIVE WORKING

■ TEMPORARY INSULATION

RANGES OF PRODUCTS

■ SUBSTATION EQUIPEMENT/ RESCUE EQUIPMENT

OUR CLIENTS

■ THEY ARE TRUSTING US

END OF THE PRESENTATION

THANK YOU VERY MUCH FOR YOUR ATTENTION

WORK IN TOTAL CONFIDENCE ON YOUR POWER NETWORK

FOR UAE: [email protected]

electrical safety equipments ppe low voltage presentation sfe in uae

Business

lv detectorspecifications

lv detectorfunctions

voltage display

c lv detector tag

environment lv detector

d low voltage detector

hazardous voltage indication

absence of operating