electrofusion - central plastics · 2020-03-02 · gf central plastics’ electrofusion ﬁttings...

GF Piping Systems

Electrofusion

10014345_02/17

DisclaimerInformation in the catalogGF Central Plastics is as diligent as possible in compiling and updating the information in its catalog. However, GF Central Plastics does not guarantee the correctness and completeness of the information provided in its catalog. Equally, GF Central Plastics does not guarantee that this information is up to date. Drawings dimensions and weights, unless otherwise noted by tolerances, should be considered for reference only and may not reflect the exact physical measurements of the parts. For questions concerning our products, their specifications and their utilization please contact your local Regional Sales Manager or Customer Service Representative of GF Central Plastics. For comments concerning the product catalog, please email [email protected].

GF Central Plastics’ Electrofusion fittings are designed

and manufactured in accordance with ASTM F-1055 for

use with pipe conforming to ASTM D2513/3035, F-714

and with Butt fittings conforming to ASTM D3261 as

applicable. These fittings can be supplied with an integral

identification resistor which is recognized by GF Central

Plastics’ processors to automatically set the proper

fusion parameters. Electrofusion fittings are supplied

with a 24 digit ISO compliant barcode label which

facilitates the simple input of correct fusion parameters.

PE2406/PE2708 and PE3408/PE4710 Electrofusion

fittings are produced from high quality virgin resins that

have designated listings of PE2406/2708 or PE3408/

PE4710 both of which comply with ASTM D3350.

Features• Compatible for fusion to either PE2406/PE2708 or

PE3408/PE4710 and other similar pipe.• Cross-fusion compatible without special fusion

instructions• Pressure rated for natural gas and potable water

applications.• PE3408/PE4710 fittings utilize NSF listed resin• PE3408/PE4710 fittings are tested to the

requirements of AWWA C906• PE3408/PE4710 fittings are FM approved (where

applicable – see FM Section)• CSA Certification (where applicable)• Available in metric sizes

Electrofusion: Fittings Information

According to ASTM F1290-90, electrofusion is defined as

“a heat fusion joining process where the heat source is

an integral part of the fitting, such that when an electrical

current is applied, heat is produced that melts and joins

the plastic.”

At GF Central Plastics, we are proud to be recognized as

the company that pioneered and introduced the concept

of electrofusion to industries throughout the United

States in 1983.

Recognized as an industry leader in the world of

electrofusion fitting design and manufacturing, GF

Central Plastics o�ers our customers the most complete

package of electrofusion fittings. All designed,

manufactured and tested in Shawnee, Oklahoma, under

the highest ISO 9001 quality standards and serviced by

an experienced sta� of the most knowledgeable and

customer-friendly professionals you could hope to find.

Bringing unrivaled knowledge, experience and

manufacturing capabilities to industries throughout the

world, GF Central Plastics delivers innovative and cost

e�ective pipe joining solutions right to your door step.

Servicing the polyethylene fitting needs in natural gas,

potable water, municipal wastewater, oil and gas

gathering, mining, landfill, telecommunications,

geothermal, irrigation and other industries, GF Central

Plastics is helping to ensure that your conventional fusion

job is done right – the first time.

With an extensive and state of the art in-house testing

facility, GF Central Plastics performs all of the following

tests on all of our Electrofusion fittings.

• ASTM D1599 - Minimum Hydraulic Burst Pressure

Test.• ASTM D1598 -Sustained Pressure Test.• ASTM F1055 Tensile Strength Test.• Joint Integrity Test.• ASTM F1055 9.4.1 Crush test of pipe without

separation from electrofusion zone.• ASTM D3034 - Gasketed Outlet Tested to 30 psi > 100

hrs (where applicable)• PE3408/PE4710 fittings are tested to the

requirements of AWWA C906 (where applicable).

Electrofusion: Product Information

Couplings 1

Elbows 5

Caps 6

Reducers 9

Tapping Tees 14

Saddles

Branch Saddles 40

Transition Saddles 52

WYEs 72

Flex Restraints 73

Index 74

Table of Contents Electrofusion

1

ELECTROFUSION COUPLINGPE2406/PE2708CTS/IPS

• Pin Type: 4.7R (4.7 Pin with Resistor)• *Approval: ASTM D2513/F1055• Approval: ASTM D2513• Approval: ASTM F1055• Approval: CSA B137.4.1Note: Operating pressure is 200 psi for PE4710 couplings in allowable applications.* Industrial Non-Compliant ASTM Fittings** For use with Bar-Code Processor OnlyPlease call for more information on availability, pricing, other sizes and dimensions. <...> Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)H

(inch)L

(inch)A

(inch)Box Qty

1/2 CTS 5760001 360 000 884 0.110 2.01 3.15 1.57 50* 3/4 CTS 5757042 360 000 888 0.110 2.15 2.98 1.42 40

1 CTS 5760005 360 000 892 0.198 2.52 3.46 1.73 25* 1-1/4 CTS 10001613 360 000 896 0.154 2.56 3.30 1.57 30

1/2 IPS 5757001 360 000 886 0.132 2.15 2.98 1.42 403/4 IPS 5760004 360 000 890 0.154 2.48 3.46 1.73 25

1 IPS 5760006 360 000 894 0.132 2.63 3.46 1.73 251-1/4 IPS 5760008 360 000 898 0.220 3.04 3.86 1.93 501-1/2 IPS 5760010 360 000 900 0.419 3.36 4.33 2.07 35

2 IPS 5760012 360 000 921 0.419 3.78 4.72 2.36 253 IPS 5757007 360 000 934 1.146 5.18 5.59 2.72 364 IPS 5757008 360 000 937 1.565 6.51 6.14 3.00 106 IPS 5757009 360 000 941 4.365 8.70 8.35 4.10 8

* 6 IPS 10001682 360 000 940 4.145 8.70 8.35 4.10 88 IPS 5757010 360 000 945 8.422 11.20 9.48 4.70 4

2

ELECTROFUSION COUPLINGPE3408/PE4710CTS/IPS

• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM D2513• Approval: ASTM F1055• Approval: AWWA C906• Approval: NSF-61• *Approval: FM 1613; FM CL150; NSF-61• **Approval: FM 1613; FM CL200; NSF-61Note: Operating pressure is 200 psi for PE4710 couplings in allowable applications.* Industrial Non-Compliant ASTM Fittings** For use with Bar-Code Processor OnlyPlease call for more information on availability, pricing, other sizes and dimensions. <...> Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)H

(inch)L

(inch)A

(inch)Box Qty

1/2 CTS 5760019 360 000 883 0.088 2.01 3.15 1.57 503/4 CTS 10004578 360 000 887 0.132 2.15 2.98 1.42 40

1 CTS 5760023 360 000 891 0.198 2.52 3.46 1.73 251-1/4 CTS 10004573 360 000 895 0.154 2.56 3.30 1.57 30

* 2 CTS 10004580 360 000 919 0.463 3.59 4.37 2.18 401/2 IPS 10004627 360 000 885 0.132 2.15 2.98 1.42 403/4 IPS 5760022 360 000 889 0.220 2.48 3.46 1.73 25

1 IPS 5760024 360 000 893 0.132 2.63 3.46 1.73 251-1/2 IPS 5760028 360 000 899 0.331 3.36 4.33 2.17 351-1/4 IPS 5760026 360 000 897 0.287 2.56 3.30 1.57 50

2 IPS 5760030 360 000 920 0.375 3.78 4.72 2.36 253 IPS 10000358 360 000 933 1.168 5.18 5.59 2.72 36

** 4 IPS 10000360 360 000 936 1.676 6.51 6.14 3.00 106 IPS 10011339 360 021 241 4.145 8.74 8.19 4.09 8

** 6 IPS 10000359 360 000 939 4.497 8.70 8.35 4.10 87 IPS 10003970 360 000 942 4.960 8.93 8.19 4.09 8

** 8 IPS 10000361 360 000 944 8.444 11.20 9.48 4.70 4* 10 IPS 10004579 360 000 902 15.741 13.41 10.50 5.00 1

** 10 IPS 10000362 360 000 903 15.234 13.10 10.50 5.00 1* 12 IPS 10004571 360 000 905 23.104 15.84 11.50 5.50 1

** 12 IPS 10000363 360 000 906 23.898 15.84 11.50 5.50 1

3

ELECTROFUSION COUPLINGPE3408/PE4710DIPS

• Pin Type: 4.7S (4.7 Solid Pin)• Approval: ASTM F1055• Approval: NSF-61• *Approval: ASTM D2513; AWWA C906• **Approval: ASTM D2513; AWWA C906; FM1613; CL200• ***Approval: AWWA C906Note: Operating pressure is 200 psi for PE4710 couplings in allowable applications.* Industrial Non-Compliant ASTM Fittings** For use with Bar-Code Processor OnlyPlease call for more information on availability, pricing, other sizes and dimensions. <...> Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)H

(inch)L

(inch)A

(inch)Box Qty

*** 4 DIPS 10000353 360 000 935 1.565 6.06 6.93 3.46 10*** 6 DIPS 10000354 360 000 938 5.975 8.74 8.19 4.09 8

8 DIPS 10000355 360 000 943 8.378 11.14 10.16 5.08 4* 10 DIPS 10000356 360 000 901 15.344 13.70 10.90 5.50 1

*** 12 DIPS 10000357 360 000 904 28.704 16.20 12.80 6.40 1

4

ELECTROFUSION LARGE DIAMETER COUPLINGPE3408/PE4710IPS/DIPS

• Pin Type: 4.7S (4.7 Solid Pin)• Approval: ASTM F1055• Approval: NSF-61• *Approval: ASTM D2513; AWWA C906• **Approval: ASTM D2513; AWWA C906; FM1613; CL200• ***Approval: AWWA C906Note: Operating pressure is 200 psi for PE4710 couplings in allowable applications.Note: Large diameter couplings are available only to approved distributors.Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. <...> Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)H

(inch)L

(inch)A

(inch)Box Qty

** 14 IPS 10000202 360 000 909 35.186 17.24 12.13 6.06 1** 16 IPS 10000204 360 000 913 47.091 19.65 13.54 6.77 1** 18 IPS 10000207 360 000 917 65.610 22.13 14.96 7.48 1** 20 IPS 10000210 360 000 924 91.007 24.57 16.46 8.23 1** 22 IPS 10000213 360 000 926 117.991 27.21 17.95 8.98 1** 24 IPS 10000216 360 000 930 177.009 30.59 19.50 9.75 1

26 IPS 10004581 360 000 932 155.007 30.59 19.50 9.75 1* 14 DIPS 10000205 360 000 907 52.999 19.65 13.54 6.77 1* 16 DIPS 10000208 360 000 911 72.003 22.13 14.96 7.48 1* 18 DIPS 10000211 360 000 915 97.995 24.57 16.46 8.23 1* 20 DIPS 10000214 360 000 922 125.002 27.21 17.95 8.98 1* 24 DIPS 10000218 360 000 928 183.998 31.69 19.50 9.75 1

5

Elbows

ELECTROFUSION FITTINGS: 45° ElbowPE3408/PE4710, DR11 IPS

• Outlet Wall: DR11• Pin Type: 4.7S (4.7 Solid Pin)• Approval: ASTM D2513• Approval: ASTM F1055• Approval: AWWA C906• Approval: NSF-61Please call for more information on availability, pricing, other sizes and dimensions. Size(inch)

GFCPPart No.

GFPart No.

weight(lb)

A(inch)

L(inch)

H(inch)

Box Qty

2 10012171 360 021 099 1.301 1 9 4 10

6

Caps

ELECTROFUSION CAPPE3408/PE4710

• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM D2513• Approval: ASTM F1055• Approval: AWWA C906Please call for more information on availability, pricing, other sizes and dimensions.

Size(inch)

GFCPPart No.

GFPart No.

weight(lb)

H(inch)

L(inch)

A(inch)

Box Qty

1/2 CTS 5760300 360 004 294 0.132 1.87 3.15 1.36 401 CTS 10004867 360 000 861 0.220 2.32 2.98 1.36 40

1 1/4 CTS 10004561 360 000 864 0.243 2.56 4.82 1.87 303/4 IPS 5760303 360 000 860 0.220 2.32 3.52 1.36 50

1 IPS 5760305 360 000 862 0.220 2.56 3.82 1.57 401 1/4 IPS 5760307 360 000 866 0.353 3.00 5.13 1.82 401 1/4 IPS 5760309 360 003 700 0.573 3.00 5.13 1.82 30

2 IPS 5760311 360 000 869 0.595 3.82 4.94 2.09 253 IPS 10004564 360 000 871 2.138 5.18 10.30 2.72 104 IPS 10004565 360 000 874 3.064 6.51 10.89 3.00 46 IPS 10004566 360 000 876 8.951 8.70 14.71 4.10 48 IPS 10004567 360 000 879 7.011 11.20 15.61 4.70 1

12 IPS 10004563 360 000 868 41.998 15.70 17.68 5.75 1

7

ELECTROFUSION CAPPE2406/PE2708

• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM D2513• Approval: ASTM F1055• Approval: CSA B137.4.1• *Approval: ASTM D2513/F1055Please call for more information on availability, pricing, other sizes and dimensions. <...> Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)H

(inch)L

(inch)A

(inch)Box Qty

1/2 CTS 5753281 360 000 858 0.132 1.87 3.15 1.36 40* 1/2 IPS 10008888 360 000 859 0.132 2.15 3.31 1.42 40

3/4 IPS 10012886 360 021 200 0.220 2.32 3.52 1.36 40* 1 CTS 10012701 360 021 201 0.220 2.32 2.98 1.36 40

1 IPS 5753271 360 000 863 0.198 2.56 3.82 1.57 40* 1 1/4 CTS 5753279 360 000 865 0.220 2.56 4.82 1.57 30

1 1/4 IPS 5753273 360 000 867 0.375 3.00 5.13 1.82 302 IPS 10013860 360 029 059 0.595 3.82 4.94 2.09 25

* 2 IPS 5753277 360 000 870 0.617 3.82 4.94 2.09 25* 3 IPS 5753247 360 000 872 2.161 5.18 10.30 2.72 10

3 IPS 10013867 360 029 060 2.161 5.18 10.30 2.72 10* 4 IPS 5753249 360 000 875 3.109 6.51 10.89 3.00 10

4 IPS 10013868 360 029 061 3.109 6.51 10.89 3.00 4* 6 IPS 5753251 360 000 877 4.740 8.70 14.71 4.10 4

6 IPS 10013869 360 029 062 4.740 8.70 14.71 4.10 48 IPS 10013870 360 029 063 7.011 11.20 15.61 4.70 4

* 8 IPS 5753253 360 000 880 7.011 11.20 15.61 4.70 4

8

ELECTROFUSION CAP PE2406/PE2708

• Pin Type: 4.7S (4.7 Solid Pin)• Approval: ASTM D2513• Approval: ASTM F1055Please call for more information on availability, pricing, other sizes and dimensions. Size(inch)

GFCPPart No.

GFPart No.

weight(lb)

H(inch)

L(inch)

A(inch)

Box Qty

3 IPS 5753228 360 000 873 2.161 5.18 10.30 2.72 108 IPS 5753234 360 000 881 7.011 11.20 15.61 4.70 4

9

Reducers

ELECTROFUSION REDUCER PE3408/PE4710CTS/IPS

• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM D2513• Approval: ASTM F1055• Approval: AWWA C906Please call for more information on availability, pricing, other sizes and dimensions. Max Size

(inch)Min Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)Style H

(inch)L

(inch)A

(inch)B

(inch)Box Qty

1 CTS 1/2 CTS 10007238 360 001 064 0.154 1 2.50 3.28 1.31 1.47 401 CTS 3/4 CTS 10007392 360 001 066 0.176 2 401 CTS 3/4 IPS 10008849 360 001 067 0.176 2 2.50 3.28 1.47 1.55 40

1 1/4 CTS 1 IPS 10004630 360 001 078 0.176 2 2.56 3.30 1.55 1.55 303/4 IPS 1/2 CTS 10004595 360 001 061 0.154 1 2.50 3.28 1.25 1.47 40

1 IPS 1/2 CTS 10003869 360 001 069 0.176 1 2.60 3.28 1.46 1.46 301 IPS 1 CTS 10004629 360 001 075 0.176 1 2.63 3.28 1.42 1.43 30

1 1/4 IPS 1 CTS 10008218 360 001 080 0.331 2 3.00 3.70 1.88 1.57 403/4 IPS 1/2 IPS 10010494 360 021 360 0.132 1 2.50 3.28 1.25 1.47 40

1 IPS 1/2 IPS 10004628 360 001 071 0.154 1 2.60 3.28 1.46 1.53 301 1/4 IPS 1 IPS 10004625 360 001 081 0.309 2 3.00 3.71 1.88 1.57 40

1 IPS 3/4 IPS 10003816 360 001 073 0.198 1 2.63 3.28 1.42 1.43 301 1/4 IPS 3/4 IPS 360 060 184 0.270 40

2 IPS 1 1/4 IPS 10011052 360 021 371 0.639 1 4.75 25

10

ELECTROFUSION REDUCERPE2406/PE2708CTS/IPS

• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM D2513• Approval: ASTM F1055• *Approval: CSA B137.4.1Please call for more information on availability, pricing, other sizes and dimensions. <...> Max Size

(inch)Min Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)

1 CTS 1/2 CTS 10000481 360 001 065 0.1321 1/4 CTS 1 CTS 10000518 360 001 077 0.154

1 CTS 3/4 IPS 10000479 360 001 068 0.1321 1/4 CTS 1 IPS 5757068 360 001 079 0.154

* 3/4 IPS 1/2 CTS 5757069 360 001 062 0.132* 1 IPS 1/2 CTS 5757070 360 001 070 0.176* 1 IPS 1 CTS 5757071 360 001 076 0.154

3/4 IPS 1/2 IPS 10000477 360 001 063 0.132* 1 IPS 1/2 IPS 5757072 360 001 072 0.176* 1 IPS 3/4 IPS 5757073 360 001 074 0.176* 1 1/4 IPS 1 IPS 5757074 360 022 945 0.000

Style H(inch)

L(inch)

A(inch)

B(inch)

Box Qty

1 2.50 3.28 1.31 1.47 401 2.56 3.30 1.53 1.52 402 2.50 3.28 1.36 1.44 402 2.56 3.30 1.55 1.55 301 2.50 3.28 1.25 1.47 401 2.60 3.28 1.46 1.46 301 2.63 3.28 1.42 1.43 301 2.50 3.28 1.47 1.55 401 2.60 3.28 1.46 1.53 301 2.63 3.28 1.42 1.43 302 3.00 3.70 1.88 1.57 40

11

Tees

ELECTROFUSION FITTINGS: TEE KITPE2406/PE2708

• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261Kit includes (2) EF couplings and (1) butt teePlease call for more information on availability, pricing, other sizes and dimensions.

Size(inch)

GFCPPart No.

GFPart No.

weight(lb)

H(inch)

L(inch)

A(inch)

Box Qty

1/2 CTS 10012912 360 021 382 0.309 301 CTS 10012913 360 021 384 0.551 20

1 1/4 IPS 10012991 360 021 385 0.705 3.00 5.24 1.82 25

ELECTROFUSION FITTINGS: TEE KITPE3408/PE4710, DR11

• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• Approval: AWWA C906• Approval: NSF-61Kit includes (2) EF couplings and (1) butt teePlease call for more information on availability, pricing, other sizes and dimensions.

Size(inch)

GFCPPart No.

GFPart No.

weight(lb)

H(inch)

L(inch)

A(inch)

Box Qty

1 CTS 10012874 360 021 383 0.705 202 IPS 10012875 360 021 388 0.002 3.95 6.51 2.26 154 IPS 10012876 360 021 391 0.002 16 IPS 10012877 360 021 393 0.002 18 IPS 10012878 360 021 396 0.002 1

table continued on the next page14

High Volume Tapping Tee with Stainless Steel Cutter

ELECTROFUSION HIGH VOLUME TAPPING TEE with STAINLESS STEEL CUTTERPE3408/PE4710, B-Under ClampOutlet Size: 2" IPS, DR11

• Pin Type: 4.7R (4.7 Pin with Resistor)• Cutter Size Material: 1.5/Stainless Steel• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• Approval: AWWA C906• Approval: NSF-61Please call for more information on availability, pricing, other sizes and dimensions. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)A

(inch)W

(inch)H

(inch)D

(inch)Box Qty

2 IPS (BF) 10004598 360 001 005 3.131 3.00 3.59 6.65 2.60 102 IPS 10012182 360 021 286 3.505 3.00 3.59 6.65 2.60 10

ELECTROFUSION HIGH VOLUME TAPPING TEE with STAINLESS STEEL CUTTERPE3408/PE4710 Outlet Size: 2" IPS, DR11

• Pin Type: 4.7R (4.7 Pin with Resistor)• Cutter Size Material: 1.8/Stainless Steel• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• Approval: AWWA C906• Approval: NSF-61Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures.

Main Size(inch)

GFCPPart No.

GFPart No.

weight(lb)

3 IPS (BF) 10004613 360 001 015 2.8663 IPS 10012183 360 021 296 3.175

4 IPS (BF) 10004610 360 001 025 3.0204 IPS/DIPS (BF) 10006024 360 001 032 3.020

4 IPS 10012184 360 021 307 3.7486 IPS/DIPS (BF) 10004622 360 001 043 3.792

6 IPS 10012185 360 021 320 3.5278 IPS (BF) 10007720 360 001 050 2.756

8 IPS 10012186 360 021 334 2.95410 IPS 10012187 360 021 264 2.91012 IPS 10012188 360 021 275 28.506

Clamp Type A(inch)

W(inch)

H(inch)

D(inch)

Box Qty

C-Under Clamp 3.00 3.59 6.65 2.60 10C-Under Clamp 3.00 3.59 6.65 2.60 10D-Under Clamp 3.00 4.60 6.66 2.60 8D-Under Clamp 3.00 4.60 6.66 2.60 8D-Under Clamp 3.00 4.60 6.66 2.60 8E-Under Clamp 3.00 8.68 8.43 2.60 5E-Under Clamp 3.00 8.68 8.43 2.60 5

15

Clamp Type A(inch)

W(inch)

H(inch)

D(inch)

Box Qty

E-Top Load 2.68 5.92 7.88 1.60 8E-Top Load 2.68 5.92 7.88 1.60 8E-Top Load 3.00 6.10 7.88 1.60 8E-Top Load 3.00 6.10 7.88 1.60 8

ELECTROFUSION HIGH VOLUME TAPPING TEE with STAINLESS STEEL CUTTERPE3408/PE4710, H-Top LoadOutlet Size: 2" IPS, DR11

• Pin Type: 4.7S (4.7 Solid Pin)• Cutter Size Material: 1.8/Stainless Steel• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• Approval: AWWA C906• Approval: NSF-61Please call for more information on availability, pricing, other sizes and dimensions.

Main Size(inch)

GFCPPart No.

GFPart No.

weight(lb)

A(inch)

W(inch)

H(inch)

D(inch)

Box Qty

8 DIPS (SF) 10004582 360 021 323 1.830 3.00 5.92 7.88 2.60 158 DIPS (BF) 10004616 360 001 045 4.101 3.00 5.92 7.88 2.60 30

8 IPS (BF) 10007505 360 001 053 2.756 3.00 5.92 7.88 2.60 810 IPS (BF) 10014208 360 029 065 6.151 3.00 6.10 7.88 2.60 812 IPS (BF) 10003561 360 000 995 3.153 3.00 6.10 7.88 2.60 8

12 DIPS (BF) 10012489 360 021 270 6.151 3.00 6.10 7.88 2.60 8

ELECTROFUSION HIGH VOLUME TAPPING TEE with STAINLESS STEEL CUTTERPE3408/PE4710, H-Top LoadOutlet Size: 1.25" IPS (BF), DR10/11

• Pin Type: 4.7S (4.7 Solid Pin)• Cutter Size Material: 1.8/Stainless Steel• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261Please call for more information on availability, pricing, other sizes and dimensions. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)A

(inch)W

(inch)H

(inch)D

(inch)Box Qty

12 10009314 360 000 991 3.351 2.68 6.10 7.88 1.66 8

16

ELECTROFUSION HIGH VOLUME TAPPING TEE with STAINLESS STEEL CUTTERPE3408/PE4710, H-Top LoadOutlet Size: 1.25" IPS (BF), DR11

• Pin Type: 4.7S (4.7 Solid Pin)• Cutter Size Material: 1.5/Stainless Steel• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• Approval: AWWA C906• Approval: NSF-61Please call for more information on availability, pricing, other sizes and dimensions. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)A

(inch)W

(inch)H

(inch)D

(inch)Box Qty

8 10004614 360 001 044 4.101 2.68 6.10 7.88 1.66 8

ELECTROFUSION HIGH VOLUME TAPPING TEE with STAINLESS STEEL CUTTERPE3408/PE4710Outlet Size: 1.25" IPS (BF), DR11

• Pin Type: 4.7R (4.7 Pin with Resistor)• Cutter Size Material: 1.5/Stainless Steel• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• Approval: AWWA C906• Approval: NSF-61Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)Clamp Type A

(inch)W

(inch)H

(inch)D

(inch)Box Qty

2 10004594 360 001 002 3.351 Under Clamp(B) 2.68 3.59 6.65 1.60 10

3 10004604 360 001 011 3.307 Under Clamp(C) 2.68 4.60 6.66 1.66 10

4 10004611 360 001 031 3.527 Under Clamp(D) 2.68 6.26 7.27 1.66 8

6 10004617 360 001 041 3.748 Under Clamp(E) 2.68 8.68 8.43 1.66 5

8 10007719 360 001 050 2.756 Top Load (E) 2.68 6.10 7.88 1.60 8


High Volume Tapping Tee

ELECTROFUSION HIGH VOLUME TAPPING TEE with STEEL CUTTERPE3408/PE4710Outlet Size: 2" IPS

• Pin Type: 4.7R (4.7 Pin with Resistor)• Cutter Size Material: 1.8/Steel• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261Please call for more information on availability, pricing, other sizes and dimensions. Main Size

(inch)SDR GFCP

Part No.GF

Part No.weight

(lb)

3 11 10009495 360 003 443 3.4393 9 10009664 360 003 469 2.9103 11 10009718 360 003 126 3.4393 9 10009722 360 003 749 3.4393 11 10012511 360 021 291 0.0024 11 10009497 360 003 446 2.6244 9 10009668 360 003 471 2.6244 11 10009724 360 003 127 2.6244 9 10009727 360 003 750 2.6244 11 10012512 360 021 302 3.6826 11 10009499 360 003 447 3.2636 9 10009672 360 003 473 3.8146 11 10009730 360 003 128 3.4616 9 10009734 360 003 751 3.8146 11 10011777 360 021 314 0.0026 11 10012513 360 021 313 3.9688 11 10009501 360 003 448 2.9988 9 10009676 360 003 475 2.9108 11 10009695 360 003 480 2.7568 11 10011190 360 021 332 3.4618 11 10011778 360 021 331 0.0028 11 10012514 360 021 330 3.395

Clamp Type A(inch)

W(inch)

H(inch)

D(inch)

Box Qty

Under Clamp(C) 3.00 4.60 6.66 2.60 10

Under Clamp(C) 3.00 4.60 6.66 2.60 10

Underpart 3.00 4.60 6.66 2.60 10Underpart 3.00 4.60 6.66 2.60 10Underpart 3.00 4.60 6.66 2.60 10

Under Clamp(D) 3.00 6.26 7.27 2.60 8

Under Clamp(D) 3.00 6.26 7.27 2.60 8


Under Clamp(E) 3.00 8.68 8.43 2.60 5

Under Clamp(E) 3.00 8.68 8.43 2.60 5

Underpart 3.00 8.68 8.43 2.60 5Underpart 3.00 8.68 8.43 2.60 5Underpart 3.00 8.68 8.43 2.60 5Underpart 3.00 8.68 8.43 2.60 10

Top Load (E) 3.00 5.92 7.88 2.60 8Top Load (E) 3.00 5.92 7.88 2.60 8

18

Clamp Type A(inch)

W(inch)

H(inch)

D(inch)

Box Qty

Top Load (E) 3.00 5.92 7.88 2.60 5Top Load (E) 3.00 5.92 7.88 2.60 8Top Load (E) 3.00 5.92 7.88 2.60 5Top Load (E) 3.00 5.92 7.88 2.60 10

ELECTROFUSION HIGH VOLUME TAPPING TEE with STEEL CUTTERPE3408/PE4710Outlet Size: 2" IPS

• Pin Type: 4.7R (4.7 Pin with Resistor)• Cutter Size Material: 1.5/Steel• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261Please call for more information on availability, pricing, other sizes and dimensions. SDR GFCP

Part No.GF

Part No.weight

(lb)Clamp Type A

(inch)W

(inch)H

(inch)D

(inch)Box Qty

11 10003537 360 001 006 1.830 Under Clamp(B) 3.00 6.59 6.65 2.60 10

9 10006644 360 001 009 2.756 Under Clamp(B) 3.00 6.59 6.65 2.60 10

11 10010493 360 003 748 2.910 Underpart 3.00 6.59 6.65 2.60 1011 10012510 360 021 281 3.329 Underpart 3.00 6.59 6.65 2.60 10

ELECTROFUSION HIGH VOLUME TAPPING TEE with STEEL CUTTERPE3408/PE4710, DR11Outlet Size: 1 1/4" IPS

• Pin Type: 4.7R (4.7 Pin with Resistor)• Cutter Size Material: 1.5/Steel• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)Clamp Type A

(inch)B

(inch)H

(inch)D

(inch)Box Qty

2 10004588 360 001 003 1.830 Under Clamp(B) 2.68 3.59 6.65 1.66 10

6 10004618 360 001 034 3.263 Under Clamp(E) 2.68 3.59 6.65 1.66 5

2 10010492 360 003 743 2.888 Underpart 2.68 8.68 8.43 1.66 10


ELECTROFUSION HIGH VOLUME TAPPING TEE with STEEL CUTTERPE3408/PE4710, DR11Outlet Size: 1 1/4" IPS (BF)


(inch)GFCP

Part No.GF

Part No.weight

(lb)

3 10009662 360 003 468 2.9103 10009717 360 003 744 3.3514 10009666 360 003 470 3.0424 10009723 360 003 745 3.4616 10009670 360 003 472 3.2416 10009729 360 003 746 3.4178 10009674 360 003 474 2.998

Clamp Type A(inch)

W(inch)

H(inch)

D(inch)

B(inch)

Box Qty

Under Clamp(C) 2.68 1.60 6.66 1.66 10

Underpart 2.68 1.60 6.66 1.66 8Under Clamp

(D) 2.68 6.26 7.27 1.66 8


(E) 2.68 8.68 8.43 1.66 5

Underpart 2.68 8.68 8.43 1.66 5Top Load (E) 2.68 6.10 7.88 1.66 8

ELECTROFUSION HIGH VOLUME TAPPING TEEPE2406/PE2708, DR11Outlet Size: 2" IPS (BF)

• Pin Type: 4.7R (4.7 Pin with Resistor)• Cutter Size Material: 1.8/Steel• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• *Approval: CSA B137.4.1Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. <...> Main Size

(inch)Part No. Part No. weight

(lb)

* 3 10009496 360 003 444 2.8883 10009688 360 021 293 3.8803 10009719 360 004 343 3.0203 10009720 360 021 295 3.880

* 4 10009498 360 002 881 3.0204 10009690 360 021 304 4.0124 10009725 360 004 344 3.6164 10009728 360 021 306 4.012

* 6 10009500 360 001 039 2.8226 10009731 360 004 345 3.836

* 6 10009754 360 021 316 3.9906 10012294 360 021 319 4.079

* 8 10009502 360 003 450 3.527* 8 10009696 360 021 333 3.880

20

Clamp Type A(inch)

W(inch)

H(inch)

D(inch)

Box Qty

Under Clamp(C) 3.00 4.60 6.66 2.60 10


Under Clamp(D) 3.00 6.26 7.27 2.60 8


Under Clamp(E) 3.00 8.68 8.43 2.60 5


(E) 3.00 8.68 8.43 2.60 8

Underpart 3.00 8.68 8.43 2.60 5Top Load (E) 3.00 5.92 7.88 2.60 8Top Load (E) 3.00 5.92 7.88 2.60 5

ELECTROFUSION HIGH VOLUME TAPPING TEEPE2406/PE2708, DR11Outlet Size: 2" IPS (BF), Common Dimensions: A: 3.00", D: 2.60"

• Pin Type: 4.7R (4.7 Pin with Resistor)• Cutter Size Material: 1.5/Steel• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• *Approval: CSA B137.4Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. <...> Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)Clamp Type W

(inch)H

(inch)Box Qty

2 10010496 360 004 342 2.888 Underpart 3.59 6.65 102 10012293 360 021 285 3.748 Underpart 3.59 6.65 10

2 5757081 360 021 284 3.704 Under Clamp(B) 3.59 6.65 10

* 2 5757114 360 001 007 2.778 Under Clamp(B) 3.59 6.65 10

* 6 5757119 360 001 036 4.079 Under Clamp(E) 8.68 8.43 5

* 8 5757121 360 001 054 2.910 Top Load (E) 5.92 7.88 8

21

ELECTROFUSION HIGH VOLUME TAPPING TEEPE2406/PE2708, DR10/11Outlet Size: 1 1/4" IPS (BF), Common Dimensions: A: 2.68", D: 1.66"


(inch)GFCP

Part No.GF

Part No.weight

(lb)Clamp Type W

(inch)H

(inch)Box Qty

3 10009661 360 021 289 3.307 Under Clamp(C) 4.60 6.66 10

3 10010968 360 021 288 3.395 Under Clamp(C) 4.60 6.66 10

4 10009665 360 021 300 3.042 Under Clamp(D) 6.26 7.27 7

4 10010969 360 021 299 3.219 Under Clamp(D) 6.26 7.27 10

6 10009669 360 021 311 3.241 Under Clamp(E) 8.68 8.43 5

6 10010970 360 021 310 3.483 Under Clamp(E) 8.68 8.43 5

8 10009673 360 021 326 3.439 Top Load (E) 6.10 7.88 108 10009892 360 021 327 3.439 Top Load (E) 6.10 7.88 108 10010109 360 021 324 3.439 Top Load (E) 6.10 7.88 108 10010971 360 021 325 3.175 Top Load (E) 6.10 7.88 5

ELECTROFUSION HIGH VOLUME TAPPING TEEPE2406/PE2708, DR10/11Outlet Size: 1 1/4" IPS (BF)

• Pin Type: 4.7R (4.7 Pin with Resistor)• Cutter Size Material: 1.5/Steel• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• *Approval: CSA B137.4Please call for more information on availability, pricing, other sizes and dimensions. <...> Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)

2 10010495 360 004 341 3.1092 10010967 360 021 278 2.998

* 2 10011853 360 021 279 4.365* 2 5757109 360 001 001 3.329* 3 5757110 360 001 010 2.800* 4 5757111 360 001 021 3.483* 6 5757112 360 001 033 3.660* 8 5757113 360 001 046 2.888

Clamp Type A(inch)

W(inch)

H(inch)

D(inch)

Box Qty

Underpart 2.68 3.59 6.65 1.66 10Underpart 2.68 3.59 6.65 1.66 10

Under Clamp(B) 2.68 3.59 6.65 1.66 10

Under Clamp(B) 2.68 3.59 6.65 1.66 10

Under Clamp(C) 2.68 4.60 6.66 1.66 10

Under Clamp(D) 2.68 6.26 7.27 1.66 8

Under Clamp(E) 2.68 8.68 8.43 1.66 5

Top Load (E) 2.68 6.10 7.88 1.66 10

22

Tapping Tee with Butt Outlet & Brass Cutter

ELECTROFUSION TAPPING TEE with BUTT OUTLET and BRASS CUTTERPE3408/PE4710, DR7Outlet Size: 1" IPS

• Pin Type: 4.7R (4.7 Pin with Resistor)• Cutter Size Material: 0.8/Brass• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• Approval: AWWA C906Please call for more information on availability, pricing, other sizes and dimensions.

Main Size(inch)

GFPart No.

GFPart No.

weight(lb)

Clamp Type A(inch)

D(inch)

H(inch)

L(inch)

Box Qty

1 1/4 IPS 10011663 360 021 460 0.816 Under Clamp(A) 2.22 1.31 4.83 4.58 50

2 IPS 10009410 360 003 739 0.838 Underpart 2.22 1.31 5.06 4.50 40

2 IPS 10004790 360 001 276 0.816 Under Clamp(B) 2.22 1.31 5.06 4.50 40

3 IPS 10004810 360 001 310 0.904 Under Clamp(C) 2.22 1.31 5.18 4.58 40

4 IPS/DIPS 10004828 360 001 349 0.926 Under Clamp(D) 2.22 1.31 5.93 4.46 30

4 IPS 10009411 360 003 741 0.948 Underpart 2.22 1.31 5.93 4.46 30

6 IPS/DIPS 10004587 360 001 384 1.190 Under Clamp(E) 2.22 1.31 7.06 4.61 20

8 IPS/DIPS 10003798 360 001 413 0.705 Top Load (H) 2.22 1.31 4.14 4.60 40

ELECTROFUSION TAPPING TEE with BUTT OUTLET and BRASS CUTTERPE3408/PE4710Outlet Size: 1" CTS


Main Size(inch)

GFCPPart No.

GFPart No.

weight(lb)

Clamp Type A(inch)

D(inch)

H(inch)

L(inch)

Box Qty

1 1/4 IPS 10011662 360 021 445 0.794 Under Clamp(A) 2.22 1.12 4.83 4.58 40

2 IPS 10003085 360 001 267 0.838 Under Clamp(B) 2.22 1.12 5.06 4.50 30

3 IPS 10004845 360 001 303 0.882 Under Clamp(C) 2.22 1.12 5.18 4.58 40



8 IPS/DIPS 10008645 360 001 412 0.794 Top Load (H) 2.22 1.12 4.14 4.60 408 IPS/DIPS 10006643 360 021 706 0.882 Top Load (H) 2.22 1.12 4.14 4.60 10

23

ELECTROFUSION TAPPING TEE with BUTT OUTLET and BRASS CUTTERPE3408/PE4710, DR11Outlet Size: 3/4" IPS

• Pin Type: 4.7R (4.7 Pin with Resistor)• Cutter Size Material: 0.8/Brass• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• Approval: AWWA C906Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)Clamp Type A

(inch)D

(inch)H

(inch)L

(inch)Box Qty

2 10006028 360 001 258 0.772 Under Clamp(B) 2.22 1.12 5.06 4.50 40

3 10004781 360 001 294 0.154 Under Clamp(C) 2.22 1.12 5.18 4.58 40

4 10004794 360 001 347 0.992 Under Clamp(D) 2.22 1.12 5.93 4.46 30

6 10006029 360 001 382 1.190 Under Clamp(E) 2.22 1.12 7.06 4.61 20

8 10004592 360 001 411 0.860 Top Load (H) 2.22 1.12 4.14 4.60 40

24

Tapping Tee with Butt Outlet

ELECTROFUSION TAPPING TEE with BUTT OUTLETPE2406/PE2708Outlet Size: 1/2" CTS

• Pin Type: 4.7R (4.7 Pin with Resistor)• Cutter Size Material: 0.8/Steel• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• Approval: CSA B137.4.1• *Approval: ASTM D2513/F1055/D2683Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. <...> Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)

1.25" IPS 10009385 360 004 329 0.8381.25" IPS 5757251 360 001 226 0.507

* 1.25" IPS 10011089 360 021 418 0.7942.00" IPS 10011097 360 021 481 0.8602.00" IPS 10011197 360 021 482 0.0022.00" IPS 5757248 360 001 247 0.4853.00" IPS 10011103 360 021 538 0.7943.00" IPS 10011104 360 021 539 1.2574.00" IPS 10011110 360 021 579 0.0024.00" IPS 5757249 360 001 315 0.9046.00" IPS 10011116 360 021 633 1.2576.00" IPS 10011117 360 021 634 0.0026.00" IPS 5757250 360 001 351 1.0808.00" IPS 5757253 360 001 386 0.728

Clamp Type A(inch)

D(inch)

H(inch)

L(inch)

Box Qty

Under Clamp(A) 2.22 0.62 4.83 4.58 50

Under Clamp(A) 2.22 0.62 4.83 4.58 50

Under Clamp(A) 2.22 0.62 4.83 4.58 50


Under Clamp(B) 2.22 0.62 5.06 4.50 50

Under Clamp(C) 2.22 0.62 5.18 4.58 40

Under Clamp(C) 2.22 0.62 5.18 4.58 10


(D) 2.22 0.62 5.93 4.46 30

Under Clamp(E) 2.22 0.62 7.06 4.61 10


(E) 2.22 0.62 7.06 4.61 20

Under Clamp(H) 2.22 0.62 4.14 4.60 40

25

ELECTROFUSION TAPPING TEE with BUTT OUTLETPE2406/PE2708Outlet Size: 1/2" IPS

• Pin Type: 4.7R (4.7 Pin with Resistor)• Cutter Size Material: 0.8/Steel• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• Approval: CSA B137.4.1Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)Clamp Type A

(inch)D

(inch)H

(inch)L

(inch)Box Qty

1 1/4 IPS 10011090 360 021 425 0.794 A-Under Clamp 2.22 0.84 4.83 4.58 502 IPS 10011099 360 021 490 0.882 B-Under Clamp 2.22 0.84 5.06 4.50 402 IPS 10011532 360 021 491 0.882 Underpart 2.22 0.84 5.06 4.50 503 IPS 10011105 360 021 541 1.080 C-Under Clamp 2.22 0.84 5.18 4.58 404 IPS 10011112 360 021 586 0.970 D-Under Clamp 2.22 0.84 5.93 4.46 306 IPS 10011118 360 021 639 1.257 E-Under Clamp 2.22 0.84 7.06 4.61 208 IPS 10011606 360 021 681 0.794 H-Under Clamp 2.22 0.84 4.41 4.60 40

ELECTROFUSION TAPPING TEE with BUTT OUTLETPE2406/PE2708Outlet Size: 3/4" CTS


(inch)GFCP

Part No.GF

Part No.weight

(lb)Clamp Type A

(inch)D

(inch)H

(inch)L

(inch)Box Qty

1 1/4 IPS 10011092 360 021 429 0.002 Under Clamp(A) 2.22 0.87 4.83 4.58 50

2 IPS 5757161 360 001 252 0.750 Under Clamp(B) 2.22 0.87 5.06 4.50 40

3 IPS 5757162 360 001 290 0.794 Under Clamp(C) 2.22 0.87 5.18 4.50 40

4 IPS 5757163 360 001 319 0.002 Under Clamp(D) 2.22 0.87 5.93 4.46 30

6 IPS 5757164 360 001 355 0.002 Under Clamp(E) 2.22 0.87 7.06 4.61 20

8 IPS 5757167 360 001 390 0.794 Under Clamp(H) 2.22 0.87 4.14 4.60 40


ELECTROFUSION TAPPING TEE with BUTT OUTLETPE2406/PE2708Outlet Size: 3/4" IPS


(inch)GFCP

Part No.GF

Part No.weight

(lb)Clamp Type A

(inch)D

(inch)H

(inch)L

(inch)Box Qty

1 1/4 IPS 5757084 360 001 233 0.794 Under Clamp(A) 2.22 1.08 4.83 4.58 50

2 IPS 5757087 360 001 259 0.794 Under Clamp(B) 2.22 1.08 5.06 4.50 40

2 IPS 10009392 360 003 120 0.860 Under Clamp(B) 2.22 1.08 5.06 4.50 30

3 IPS 5757088 360 001 295 0.816 Under Clamp(C) 2.22 1.08 5.18 4.58 40

4 IPS 5757141 360 001 325 0.882 Under Clamp(D) 2.22 1.08 5.93 4.46 30

4 IPS 10009401 360 004 332 0.926 Under Clamp(D) 2.22 1.08 5.93 4.46 30

6 IPS 5757143 360 001 361 1.146 Under Clamp(E) 2.22 1.08 7.06 4.61 20

6 IPS 10009405 360 004 333 1.190 Under Clamp(E) 2.22 1.08 7.06 4.61 20

ELECTROFUSION TAPPING TEE with BUTT OUTLETPE2406/PE2708Outlet Size: 1" CTS


(inch)GFCP

Part No.GF

Part No.weight

(lb)Clamp Type A

(inch)D

(inch)H

(inch)L

(inch)Box Qty

1 1/4 IPS 5757030 360 001 240 0.882 Under Clamp(A) 2.22 1.12 4.83 4.58 50

1 1/4 IPS 10010563 360 021 451 0.816 Underpart 2.22 1.12 4.83 4.58 40

1 1/4 IPS 5757050 360 021 449 0.441 Under Clamp(A) 2.22 1.12 4.83 4.58 15

2 IPS 5757032 360 001 270 0.750 Under Clamp(B) 2.22 1.12 5.06 4.50 40

2 IPS 10009397 360 004 334 0.882 Underpart 2.22 1.12 5.06 4.50 40

2 IPS 10003171 360 001 272 0.882 Under Clamp(B) 2.22 1.12 5.06 4.50 10

2 IPS 5757052 360 021 515 0.485 Under Clamp(B) 2.22 1.12 5.06 4.50 15

3 IPS 5757033 360 001 306 0.816 Under Clamp(C) 2.22 1.12 5.18 4.58 40

3 IPS 10010564 360 021 556 0.970 Underpart 2.22 1.12 5.18 4.58 30

3 IPS 5757053 360 021 554 1.543 Under Clamp(C) 2.22 1.12 5.18 4.58 15

4 IPS 5757034 360 001 335 0.904 Under Clamp(D) 2.22 1.12 5.93 4.46 30

4 IPS 10009402 360 021 610 1.080 Underpart 2.22 1.12 5.93 4.46 204 IPS 10010565 360 021 608 0.002 Underpart 2.22 1.12 5.93 4.46 20

4 IPS 5757054 360 021 606 0.617 Under Clamp(D) 2.22 1.12 5.93 4.46 10

6 IPS 5757036 360 001 370 1.080 Under Clamp(E) 2.22 1.12 7.06 4.61 20

27

Main Size(inch)

GFCPPart No.

GFPart No.

weight(lb)

Clamp Type A(inch)

D(inch)

H(inch)

L(inch)

Box Qty

6 IPS 10009407 360 004 335 0.551 Underpart 2.22 1.12 7.06 4.61 10

6 IPS 5757056 360 021 658 0.772 Under Clamp(E) 2.22 1.12 7.06 4.61 10

6 IPS 5757058 360 021 695 0.463 Underpart 2.22 1.12 4.14 4.60 108 IPS 5757038 360 001 399 0.728 Top Load (H) 2.22 1.12 4.14 4.60 40

28

Tapping Tee

ELECTROFUSION TAPPING TEEPE2406/PE2708Outlet Size: 1" IPS, DR7


(inch)GFCP

Part No.GF

Part No.weight

(lb)Clamp Type A

(inch)D

(inch)H

(inch)L

(inch)Box Qty

1 1/4 IPS 5757083 360 001 244 0.794 Under Clamp(A) 2.22 1.31 4.83 4.58 50

1 1/4 IPS 10009388 360 004 336 0.794 Underpart 2.22 1.31 4.83 4.58 50

2 IPS 5757150 360 001 278 0.772 Under Clamp(B) 2.22 1.31 4.94 4.50 40

2 IPS 10009398 360 003 122 0.904 Underpart 2.22 1.31 4.94 4.50 40

3 IPS 5757151 360 001 312 0.904 Under Clamp(C) 2.22 1.31 5.06 4.50 40

3 IPS 10009399 360 004 337 0.816 Underpart 2.22 1.31 5.18 4.58 40

4 IPS 5757152 360 001 340 0.926 Under Clamp(D) 2.22 1.31 5.96 4.46 30

4 IPS 10009403 360 004 338 1.058 Underpart 2.22 1.31 5.96 4.46 20

6 IPS 5757153 360 001 376 1.102 Under Clamp(E) 2.22 1.31 7.06 4.61 20

6 IPS 10009408 360 004 339 1.301 Underpart 2.22 1.31 7.06 4.61 20

8 IPS 5757157 360 001 404 0.794 Top LoadClamp (H) 2.22 1.31 4.14 4.60 40

ELECTROFUSION TAPPING TEEPE2406/PE2708Outlet Size - 1 1/4" CTS


(inch)GFCP

Part No.GF

Part No.weight

(lb)Clamp Type A

(inch)D

(inch)H

(inch)L

(inch)Box Qty

2 IPS 5757086 360 001 282 0.485 Under Clamp(B) 5.06 4.50 40

4 IPS 5757140 360 001 344 0.926 Under Clamp(D) 5.93 4.46 30

6 IPS 5757142 360 001 379 0.794 Under Clamp(E) 7.06 4.61 20

8 IPS 5757145 360 001 408 0.816 Top LoadClamp (H) 4.14 4.60 40

29

Tapping Tee with Butt Outlet & Steel Cutter

ELECTROFUSION TAPPING TEE with BUTT OUTLET and STEEL CUTTERPE3408/PE4710Outlet Size: 1/2" CTS


(inch)GFCP

Part No.GF

Part No.weight

(lb)Clamp Type A

(inch)D

(inch)H

(inch)L

(inch)Box Qty

1 1/4 IPS 10004749 360 001 225 0.728 Under Clamp(A) 2.22 0.62 4.83 4.58 50

1 1/4 IPS 10010501 360 003 724 0.002 Underpart 2.22 0.62 4.83 4.58 50

2 IPS 10004761 360 001 246 0.838 Under Clamp(B) 2.22 0.62 5.06 4.50 50

2 IPS 10009389 360 003 725 0.860 Underpart 2.22 0.62 5.06 4.50 403 IPS 10010499 360 003 726 0.948 Underpart 2.22 0.62 5.18 4.58 404 IPS 10010502 360 003 727 1.102 Underpart 2.22 0.62 5.93 4.46 25

4 IPS 10011108 360 021 575 0.882 Under Clamp(D) 2.22 0.62 5.93 4.46 30

6 IPS 10010504 360 003 728 1.257 Underpart 2.22 0.62 7.06 4.61 30

6 IPS 10011115 360 021 630 1.058 Under Clamp(E) 2.22 0.62 7.06 4.61 20

30

Tapping Tee with Butt Outlet & Steel Cutter

ELECTROFUSION TAPPING TEE with BUTT OUTLET and STEEL CUTTERPE3408/PE4710, DR11Outlet Size: 3/4" IPS

• Pin Type: 4.7R (4.7 Pin with Resistor)• Cutter Size Material: 0.8/Steel• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• *Approval: AWWA C906; NSF-61Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. <...> Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)

1 1/4 IPS 10008687 360 001 232 0.7941 1/4 IPS 10010422 360 003 730 0.838

2 IPS 10010423 360 003 145 0.860* 2 IPS 10012665 360 021 494 0.904

3 IPS 10010424 360 003 731 0.9484 IPS 10010425 360 003 732 1.124

* 4 IPS 10012666 360 021 627 0.9926 IPS 10010426 360 003 733 1.257

* 6 IPS 10012667 360 021 670 1.1908 IPS 10008654 360 021 702 0.8608 IPS 10010427 360 003 715 0.750

Clamp Type A(inch)

D(inch)

H(inch)

L(inch)

Box Qty

Under Clamp(A) 2.22 1.12 4.83 4.58 50


Under Clamp(B) 2.22 1.12 5.06 4.50 40


Under Clamp(D) 2.22 1.12 5.93 4.46 30


(E) 2.22 1.12 7.06 4.61 20

Under Clamp(H) 2.22 1.12 4.14 4.60 10

Under Clamp(H) 2.22 1.12 4.14 4.60 40


ELECTROFUSION TAPPING TEE with BUTT OUTLET and STEEL CUTTERPE3408/PE4710Outlet Size: 1" CTS


(inch)GFCP

Part No.GF

Part No.weight

(lb)Clamp Type A

(inch)D

(inch)H

(inch)L

(inch)Box Qty

1 1/4 IPS 10007328 360 001 238 0.705 Under Clamp(A) 2.22 1.12 4.83 4.58 50

1 1/4 IPS 10010566 360 021 446 0.838 Underpart 2.22 1.12 4.83 4.58 402 IPS 10009394 360 003 734 0.860 Underpart 2.22 1.12 5.06 4.50 30

2 IPS 10010093 360 021 513 0.838 Under Clamp(B) 2.22 1.12 5.06 4.50 20

3 IPS 10007349 360 001 304 0.794 Under Clamp(C) 2.22 1.12 5.18 4.58 40

3 IPS 10010500 360 003 735 0.948 Underpart 2.22 1.12 5.18 4.58 304 IPS 10010503 360 003 736 1.080 Underpart 2.22 1.12 5.93 4.46 256 IPS 10010505 360 003 737 1.146 Underpart 2.22 1.12 7.06 4.46 158 IPS 10012485 360 021 693 1.058 Top Load (H) 2.22 1.12 4.14 4.60 10

ELECTROFUSION TAPPING TEE with BUTT OUTLET and STEEL CUTTERPE3408/PE4710Outlet Size: 1" IPS


(inch)SDR GFCP

Part No.GF

Part No.weight

(lb)

1 1/4 IPS 7 10003452 360 001 243 0.7281 1/4 IPS 7 10009387 360 003 738 0.750

2 IPS 7 10003355 360 001 277 0.7942 IPS 7 10009395 360 003 740 0.9043 IPS 7 10004792 360 001 311 0.8383 IPS 7 10013267 360 021 567 0.8824 IPS 7 10003701 360 001 339 0.9484 IPS 7 10013266 360 021 624 0.9706 IPS 11 10004820 360 021 662 1.4116 IPS 7 10004823 360 001 375 1.3018 IPS 7 10004858 360 001 403 0.772

Clamp Type A(inch)

D(inch)

H(inch)

L(inch)

Box Qty

Under Clamp(A) 2.22 1.31 4.83 4.58 30


(B) 2.22 1.31 5.06 4.50 40


(C) 2.22 1.31 5.18 4.58 40


(D) 2.22 1.31 5.93 4.46 30

32

Clamp Type A(inch)

D(inch)

H(inch)

L(inch)

Box Qty


Under Clamp(E) 2.22 1.31 7.06 4.61 20

Top Load (H) 2.22 1.31 4.14 4.60 40

33

Tapping Tee Trainer with Butt Outlet

ELECTROFUSION TAPPING TEE TRAINER with BUTT OUTLETPE2406/PE2708, B-Under ClampOutlet Size: 1/2" CTS

• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM D2513• Approval: ASTM F1055Please call for more information on availability, pricing, other sizes and dimensions. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)A

(inch)D

(inch)L

(inch)H

(inch)Box Qty

2 IPS 5757147 360 004 296 0.463 2.22 1.31 4.50 5.06 50

ELECTROFUSION TAPPING TEE TRAINER with BUTT OUTLETPE2406/PE2708Outlet Size: 1" CTS

• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM D2513• Approval: ASTM F1055• *Approval: ASTM D3261Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. <...> Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)

2 IPS 5757146 360 004 297 0.485* 2 IPS 10010588 360 021 517 0.529* 4 IPS 10010599 360 004 298 0.860

Clamp Type A(inch)

D(inch)

H(inch)

L(inch)

Box Qty

Under Clamp(B) 2.22 1.31 5.06 4.50 50


34

ELECTROFUSION TAPPING TEE TRAINER with BUTT OUTLETPE3408/PE4710, DR7Outlet Size: 1" IPS

• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)Clamp Type H

(inch)L

(inch)Box Qty

1 1/4 IPS 10010553 360 021 461 0.463 Under Clamp(A) 4.83 4.58 35

1 1/4 IPS 10010558 360 021 462 0.463 Underpart 4.83 4.58 40

2 IPS 10004808 360 021 532 0.485 Under Clamp(B) 5.06 4.50 50

2 IPS 10009396 360 021 533 0.507 Underpart 5.06 4.50 502 IPS 10010548 360 021 534 0.529 Underpart 5.06 4.50 35

3 IPS 10010554 360 021 565 0.529 Under Clamp(C) 5.18 4.58 30

3 IPS 10010559 360 021 566 0.551 Underpart 5.18 4.58 30

4 IPS 10010556 360 021 622 0.066 Under Clamp(D) 5.93 4.46 20

4 IPS 10010561 360 021 623 0.639 Underpart 5.93 4.46 20

6 IPS 10010557 360 021 666 0.772 Under Clamp(E) 7.06 4.61 12

6 IPS 10010562 360 021 667 0.794 Underpart 7.06 4.61 12

ELECTROFUSION TAPPING TEE TRAINER with BUTT OUTLETPE2406/PE2708, DR7Outlet Size: 1" IPS

• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM D2513• Approval: ASTM F1055Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)Clamp Type A

(inch)D

(inch)H

(inch)L

(inch)Box Qty

1 1/4 IPS 5757154 360 002 964 0.463 Under Clamp(A) 4.83 4.58 50

2 IPS 5757148 360 002 963 0.507 Under Clamp(B) 5.06 4.50 50

4 IPS 5757166 360 004 299 0.573 Under Clamp(D) 5.93 4.46 30

6 IPS 5757165 360 004 300 0.573 Under Clamp(E) 7.06 4.61 20

35

Tapping Tee with Socket Outlet

ELECTROFUSION TAPPING TEE with SOCKET OUTLETPE2406/PE2708, D-Under ClampOutlet Size: 1/2" IPS


(inch)GFCP

Part No.Part No. weight

(lb)A

(inch)D

(inch)H

(inch)L

(inch)Box Qty

4 IPS 10011111 360 021 585 1.036 5.93 4.46 30

ELECTROFUSION TAPPING TEE with SOCKET OUTLETPE2406/PE2708Outlet Size: 3/4" IPS

• Pin Type: 4.7R (4.7 Pin with Resistor)• Cutter Size Material: 0.8/Steel• Approval: ASTM F1055• Approval: ASTM D2513• Approval: ASTM D2683• *Approval: ASTM D3261Please call for more information on availability, pricing, other sizes and dimensions. <...> Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)

1 1/4 IPS 5757095 360 001 231 0.8161 1/4 IPS 10009386 360 003 119 0.838

2 IPS 5757097 360 001 256 0.7942 IPS 10009393 360 003 121 0.8823 IPS 5757099 360 001 292 0.8384 IPS 5757100 360 001 323 0.926

* 6 IPS 5757102 360 001 359 1.190

Clamp Type A(inch)

D(inch)

H(inch)

L(inch)

Box Qty

Under Clamp(A) 2.22 1.46 4.83 4.59 50


(B) 2.22 1.46 5.06 4.50 40


(C) 2.22 1.46 5.18 4.58 40

Under Clamp(D) 2.22 1.46 5.93 4.46 30

Under Clamp(E) 2.22 1.46 7.06 4.61 20

36

ELECTROFUSION TAPPING TEE with SOCKET OUTLETPE2406/PE2708Outlet Size: 1/2" CTS


(inch)GFCP

Part No.GF

Part No.weight

(lb)Clamp Type A

(inch)D

(inch)H

(inch)L

(inch)Box Qty

1 1/4 IPS 10011089 360 021 418 0.794 Under Clamp(A) 2.22 1.31 4.83 4.58 50

2 IPS 10010983 360 029 103 9.348 Under Clamp(B) 2.22 1.31 5.06 4.50 40

2 IPS 10011196 360 021 473 0.882 Under Clamp(B) 2.22 1.31 5.06 4.50 40

2 IPS 10011678 360 021 475 0.970 Underpart 2.22 1.31 5.06 4.50 40

3 IPS 10011102 360 004 323 0.860 Under Clamp(C) 2.22 1.31 5.18 4.58 40

4 IPS 10011107 360 004 324 0.948 Under Clamp(D) 2.22 1.31 5.93 4.46 18

6 IPS 10011114 360 004 325 1.257 Under Clamp(E) 2.22 1.31 7.06 4.46 20

8 IPS 10011657 360 021 673 0.816 Top Load (H) 2.22 1.31 4.14 4.60 408 IPS 10011620 360 021 674 0.816 Top Load (H) 2.22 1.31 4.14 4.50 40

37

Tapping Tee with Butt Outlet & Brass Cutter

ELECTROFUSION TAPPING TEE with BUTT OUTLET and BRASS CUTTERPE3408/PE4710Outlet Size: 3/4" CTS

• Pin Type: 4.7R (4.7 Pin with Resistor)• Cutter Size Material: 0.8/Brass• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• Approval: AWWA C906Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures.

Main Size(inch)

GFCPPart No.

GFPart No.

weight(lb)

Clamp Type A(inch)

D(inch)

H(inch)

L(inch)

Box Qty

2 IPS 10004825 360 001 251 0.860 Under Clamp(A) 2.22 0.87 5.06 4.50 40

2 IPS 10009391 360 003 729 0.882 Underpart 2.22 0.87 5.06 4.50 40

3 IPS 10004780 360 001 289 0.904 Under Clamp(B) 2.22 0.87 5.18 4.58 40

4 IPS/DIPS 10004806 360 001 346 6.371 Under Clamp(C) 2.22 0.87 5.93 4.46 30


8 IPS/DIPS 10004847 360 001 410 0.750 Top Load (H) 2.22 0.87 4.14 4.60 40

ELECTROFUSION TAPPING TEE with BUTT OUTLET and BRASS CUTTERPE3408/PE4710, H-Top LoadOutlet Size: 1/2" IPS


Main Size(inch)

GFCPPart No.

GFPart No.

weight(lb)

A(inch)

D(inch)

H(inch)

L(inch)

Box Qty

8 IPS/DIPS 10004846 360 001 409 0.926 2.22 0.84 4.14 4.60 40

ELECTROFUSION TAPPING TEE with BUTT OUTLET and BRASS CUTTERPE3408/PE4710Outlet Size: 1/2" CTS


Main Size(inch)

GFCPPart No.

GFPart No.

weight(lb)

Clamp Type A(inch)

D(inch)

H(inch)

L(inch)

Box Qty




Branch Saddles

ELECTROFUSION BRANCH SADDLEPE3408/PE4710Outlet Size: 8" DIPS

• Outlet Wall: DR11• Pin Type: 4.7S (4.7 Solid Pin)Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)Box Qty

12 DIPS 10009492 360 000 750 7.937 1

ELECTROFUSION BRANCH SADDLEPE2406/PE2708Outlet Size: 2" IPS

• Outlet Wall: DR11• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM D2513• Approval: ASTM F1055• *Approval: CSA B137.4.1• **Approval: ASTM D3261• ***Approval: ASTM D3261; CSA B137.4.1Please call for more information on availability, pricing, other sizes and dimensions. <...> Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)

*** 2 IPS 5757761 360 000 760 0.926* 3 IPS 5757762 360 000 764 0.926

*** 4 IPS 5757763 360 000 766 1.080** 4 IPS 10010974 360 021 158 2.006

*** 6 IPS 5757764 360 000 773 1.257** 6 IPS 10010976 360 021 161 0.683

8 IPS 10000823 360 000 786 1.014

Clamp Type A(inch)

D(inch)

H(inch)

W(inch)

L(inch)

Box Qty

Under Clamp(B) 3.28 2.37 6.65 3.59 6.62 40

Under Clamp(C) 3.28 2.37 6.65 4.60 6.62 40

Under Clamp(D) 3.28 2.37 7.72 6.26 6.62 30


Clamp Type A(inch)

D(inch)

H(inch)

W(inch)

L(inch)

Box Qty

Underpart 3.28 2.37 7.72 6.26 6.62 10Under Clamp

(E) 3.28 2.37 8.72 8.68 6.62 30

Underpart 3.28 2.37 8.72 8.68 6.62 30Top Load

Clamp (H) 3.28 2.37 5.29 6.75 5.90 30


• Outlet Wall: DR11• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• Approval: CSA B137.4.1Please call for more information on availability, pricing, other sizes and dimensions. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)

4 IPS 5757124 360 000 769 2.0946 IPS 5757125 360 000 776 3.726


Clamp Type A(inch)

D(inch)

H(inch)

W(inch)

L(inch)

Box Qty

Under Clamp(D) 3.18 4.50 3.82 7.00 8.38 8

Under Clamp(E) 3.00 4.50 4.12 9.63 9.51 8


• Outlet Wall: DR11• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• Approval: AWWA C906• Approval: NSF-61Please call for more information on availability, pricing, other sizes and dimensions. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)

2 IPS 10003536 360 000 759 0.8163 IPS 10004525 360 000 763 0.9703 IPS 10010428 360 003 705 1.0804 IPS 10003547 360 000 772 1.0804 IPS 10010429 360 021 157 1.2576 IPS 10004543 360 000 780 1.2576 IPS 10010430 360 021 160 1.3238 IPS 10007711 360 000 785 0.992

Clamp Type A(inch)

D(inch)

H(inch)

W(inch)

L(inch)

Box Qty

Under Clamp(B) 3.28 2.37 6.65 3.59 6.62 40

Under Clamp(B) 3.28 2.37 6.65 4.60 6.62 40


(D) 3.28 2.37 7.27 6.26 6.62 30

43

Clamp Type A(inch)

D(inch)

H(inch)

W(inch)

L(inch)

Box Qty


(E) 3.28 2.37 8.43 8.68 6.62 25

Underpart 3.28 2.37 8.43 8.68 6.62 30Top Load

Clamp (H) 3.28 2.37 5.29 6.75 5.90 30

44

ELECTROFUSION BRANCH SADDLEPE3408/PE4710, Top Clamp (H)Outlet Size: 2" IPS

• Outlet Wall: DR11• Pin Type: 4.7S (4.7 Solid Pin)• Approval: AWWA C906• *Approval: ASTM D2513/F1055/D3261; NSF-61Please call for more information on availability, pricing, other sizes and dimensions. <...> Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)A

(inch)D

(inch)H

(inch)W

(inch)Box Qty

8 DIPS 10004508 360 000 781 1.168 3.28 2.37 5.29 6.75 3010 DIPS 10004516 360 000 738 1.323 3.28 2.37 5.56 6.75 30

* 10 IPS 10004660 360 000 741 1.146 3.28 2.37 5.56 6.75 30* 12 IPS 10003560 360 000 751 0.992 3.28 2.37 5.73 6.75 20

12 DIPS 10004512 360 000 747 1.323 3.28 2.37 5.73 6.75 30

ELECTROFUSION BRANCH SADDLEPE3408/PE4710, Underpart ClampOutlet Size: 4" IPS, Common Dimensions: A: 3.85", D: 4.50", H: 6.00"

• Outlet Wall: DR11• Pin Type: 4.7S (4.7 Solid Pin)• Full Pressure• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• Approval: AWWA C906• Approval: NSF-61Please call for more information on availability, pricing, other sizes and dimensions. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)W

(inch)L

(inch)Box Qty

8 IPS 10005918 360 021 165 6.570 9.56 10.40 18 IPS 10006453 360 000 787 15.565 9.56 10.40 18 IPS 10014321 360 029 058 16.998 9.56 10.40 1

10 IPS 10006457 360 000 742 21.451 12.84 15.03 110 IPS 10006437 360 021 146 6.129 4.80 17.16 112 IPS 10006439 360 021 152 8.333 14.89 17.16 112 IPS 10006463 360 000 752 26.963 112 IPS 10013725 360 029 054 27.492 1

45


• Outlet Wall: DR11• Pin Type: 4.7R (4.7 Pin with Resistor)• Full Pressure• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• Approval: AWWA C906• Approval: NSF-61Please call for more information on availability, pricing, other sizes and dimensions. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)

4 IPS 10010654 360 021 159 2.1164 IPS 10014318 360 029 056 1.9626 IPS 10010653 360 021 162 3.8586 IPS 10014319 360 029 057 3.858

Clamp Type A(inch)

D(inch)

H(inch)

W(inch)

L(inch)

Box Qty


(D) 3.85 4.50 6.00 7.00 8.38 4


(E) 4.14 4.50 7.20 9.63 9.13 4

ELECTROFUSION BRANCH SADDLEPE3408/PE4710, Underpart ClampOutlet Size: 4" DIPS

• Outlet Wall: DR11• Pin Type: 4.7S (4.7 Solid Pin)• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• Approval: AWWA C906• Approval: NSF-61Please call for more information on availability, pricing, other sizes and dimensions. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)A

(inch)D

(inch)H

(inch)W

(inch)L

(inch)Box Qty

8 DIPS 10006441 360 021 163 5.027 18 DIPS 10006469 360 000 782 17.218 1

10 DIPS 10006445 360 021 144 6.768 110 DIPS 10006473 360 000 739 20.900 112 DIPS 10006449 360 021 150 8.752 112 DIPS 10006477 360 000 748 25.904 1

46

ELECTROFUSION BRANCH SADDLEPE3408/PE4710, Underpart ClampOutlet Size: 6" IPS

• Outlet Wall: DR11• Pin Type: 4.7S (4.7 Solid Pin)• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• Approval: AWWA C906• Approval: NSF-61Please call for more information on availability, pricing, other sizes and dimensions. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)A

(inch)D

(inch)H

(inch)W

(inch)L

(inch)Box Qty

8 IPS 10003795 360 021 167 5.401 18 IPS 10006455 360 000 788 16.799 1

10 IPS 10006438 360 021 147 7.893 110 IPS 10006459 360 000 745 27.646 112 IPS 10006440 360 021 153 9.612 112 IPS 10006465 360 000 753 27.999 1

ELECTROFUSION BRANCH SADDLESPE3408/PE4710Outlet Size: 6" IPS

• Outlet Wall: DR17• Pin Type: 4.7S (4.7 Solid Pin)Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)Box Qty

8 IPS 5758407 360 000 789 6.614 110 IPS 10009202 360 000 744 6.989 112 IPS 10009203 360 000 754 6.371 1

ELECTROFUSION BRANCH SADDLESPE3408/PE4710, Underpart ClampOutlet Size: 6" DIPS

• Outlet Wall: DR11• Pin Type: 4.7S (4.7 Solid Pin)• Approval: ASTM D2513• Approval: ASTM F1055• Approval: AWWA C906• Approval: NSF-61Please call for more information on availability, pricing, other sizes and dimensions. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)A

(inch)D

(inch)H

(inch)W

(inch)L

(inch)Box Qty

8 DIPS 10006442 360 021 164 6.570 18 DIPS 10006471 360 000 783 19.004 1

10 DIPS 10006446 360 021 145 8.245 110 DIPS 10006475 360 000 740 22.355 112 DIPS 10006450 360 021 151 10.296 1

47

ELECTROFUSION BRANCH SADDLESPE3408/PE4710Outlet Size: 8" IPS

• Outlet Wall: DR11• Pin Type: 4.7S (4.7 Solid Pin)• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261• Approval: AWWA C906• Approval: NSF-61Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)

8 IPS 5758390 360 000 790 10.00910 IPS 10003796 360 021 149 10.60410 IPS 10006461 360 000 745 27.64610 IPS 10009200 360 000 746 8.75212 IPS 10006467 360 000 756 27.00712 IPS 10003849 360 021 155 12.72112 IPS 10009201 360 000 755 7.937

Clamp Type A(inch)

D(inch)

H(inch)

W(inch)

L(inch)

Box Qty

Top LoadClamp (H) 1

1Underpart 1Underpart 1Underpart 1

1Top Load

Clamp (H) 1

48

Low Pressure Saddles

ELECTROFUSION LOW PRESSURE BRANCH SADDLEPE3408/PE4710, DR17Outlet Size: 6" IPS

• Outlet Wall: DR17• Pin Type: 4.7S (4.7 Solid Pin)• Low PressurePlease call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)D

(inch)H

(inch)W

(inch)Box Qty

14 IPS 10009105 360 000 824 5.490 6.62 6.00 10.60 116 IPS 10009106 360 000 828 5.071 6.62 6.00 10.60 1

16 DIPS 10009131 360 000 827 5.997 6.62 6.00 10.60 118 IPS 10009107 360 000 832 5.004 6.62 6.00 10.60 120 IPS 10009108 360 000 834 4.982 6.62 6.00 10.60 122 IPS 10009136 360 000 836 5.622 6.62 6.00 10.60 124 IPS 10009109 360 000 839 5.622 6.62 6.00 10.60 1

24 DIPS 10010395 360 003 680 5.754 6.62 6.00 10.60 126 IPS 10009139 360 000 841 7.981 6.62 6.00 10.60 128 IPS 10009140 360 000 843 7.981 6.62 6.00 10.60 130 IPS 10009110 360 000 844 5.600 6.62 6.00 10.60 132 IPS 10009111 360 000 846 5.578 6.62 6.00 10.60 134 IPS 10009112 360 000 848 5.534 6.62 6.00 10.60 136 IPS 10009113 360 000 850 5.512 6.62 6.00 10.60 142 IPS 10009114 360 000 853 2.359 6.62 6.00 10.60 148 IPS 10009115 360 000 855 3.990 6.62 6.00 10.60 1

ELECTROFUSION LOW PRESSURE BRANCH SADDLEPE3408/PE4710Outlet Size: 6" IPS, DR11

• Outlet Wall: DR11• Pin Type: 4.7S (4.7 Solid Pin)• Low PressurePlease call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)Box Qty

14 IPS 10009529 360 000 823 7.496 1

49

ELECTROFUSION LOW PRESSURE BRANCH SADDLEPE3408/PE4710Outlet Size: 8" DIPS

• Outlet Wall: DR11• Pin Type: 4.7S (4.7 Solid Pin)• Low PressureNote: These have a restricted pressure rating limited to 50 psi.Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)Box Qty

18 DIPS 10009352 360 000 831 7.496 142 DIPS 10009271 360 000 852 8.510 1

ELECTROFUSION LOW PRESSURE BRANCH SADDLEPE3408/PE4710Outlet Size: 8" IPS

• Outlet Wall: DR11• Pin Type: 4.7S (4.7 Solid Pin)• Low PressureNote: These have a restricted pressure rating limited to 50 psi.Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)Box Qty

14 10009093 360 000 825 7.826 116 10009094 360 000 829 8.003 118 10009095 360 000 833 7.275 120 10009096 360 000 835 7.496 122 10009138 360 000 837 5.622 124 10009097 360 000 840 7.540 124 10009129 360 000 838 8.157 126 10009132 360 000 842 7.981 130 10009098 360 000 845 7.893 132 10009099 360 000 847 7.033 134 10009100 360 000 849 8.686 136 10009101 360 000 851 6.900 142 10009102 360 000 854 8.378 148 10009103 360 000 856 8.752 1

50

Full Pressure Saddles

ELECTROFUSION FULL PRESSURE BRANCH SADDLEPE3408/PE4710, P-ClampOutlet Size: 8" DIPS

• Outlet Wall: DR11• Pin Type: 4.7S (4.7 Solid Pin)• Full PressurePlease call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)Box Qty

12 DIPS 10010224 360 021 175 12.302 118 DIPS 10009931 360 000 797 8.025 124 DIPS 10010030 360 021 177 7.981 142 DIPS 10009929 360 000 818 8.510 1

ELECTROFUSION FULL PRESSURE BRANCH SADDLEPE3408/PE4710, P-ClampOutlet Size: 8" IPS

• Outlet Wall: DR11• Pin Type: 4.7S (4.7 Solid Pin)• Full Pressure• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)Box Qty

14 IPS 10009899 360 000 792 7.826 116 IPS 10009900 360 000 795 8.003 118 IPS 10009901 360 000 799 7.275 120 IPS 10009902 360 000 801 11.001 122 IPS 10009925 360 000 803 5.622 124 IPS 10009903 360 000 806 7.540 126 IPS 10009923 360 000 808 7.981 130 IPS 10009904 360 000 811 7.893 132 IPS 10009905 360 000 813 8.730 134 IPS 10009906 360 000 815 8.686 136 IPS 10009907 360 000 817 0.002 142 IPS 10009908 360 000 820 8.378 148 IPS 10009909 360 000 822 0.002 1

24 DIPS 10009921 360 000 804 0.002 1

51

ELECTROFUSION FULL PRESSURE BRANCH SADDLEPE3408/PE4710, P-ClampOutlet Size: 6" IPS

• Outlet Wall: DR11• Pin Type: 4.7S (4.7 Solid Pin)• Full Pressure• Approval: ASTM D2513• Approval: ASTM F1055• Approval: ASTM D3261Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)Box Qty

14 IPS 10009910 360 003 135 7.83 116 IPS 10009911 360 003 136 5.07 1

16 DIPS 10009922 360 000 794 6.00 118 IPS 10009912 360 000 798 6.00 120 IPS 10009913 360 000 800 4.98 122 IPS 10009924 360 000 802 5.62 124 IPS 10009914 360 000 805 5.62 126 IPS 10009926 360 000 807 7.98 128 IPS 10009927 360 000 809 7.98 130 IPS 10009915 360 000 810 5.60 132 IPS 10009916 360 000 812 5.58 134 IPS 10009917 360 000 814 5.53 136 IPS 10009918 360 000 816 5.51 142 IPS 10009919 360 000 819 2.36 148 IPS 10009920 360 000 821 6.75 1

52

Transition Saddles

ELECTROFUSION FITTINGS: TRANSITION SADDLEPE3408/PE4710Outlet Size: 3/4"

• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM F1055• Approval: AWWA C906• Approval: NSF-61• *Approval: ANSI B1.20.1Outlet Material: Brass 360 AlloyCompression Ring Material: Stainless 304Please call for more information on availability, pricing, other sizes and dimensions. <...> Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)

2 IPS; 3/4 CORP 10004679 360 001 136 2.161* 2 IPS; 3/4 FPT 10004681 360 001 137 2.006

3 IPS; 3/4 CORP 10004693 360 001 151 2.161* 3 IPS; 3/4 FPT 10004695 360 001 152 2.315

4 IPS/DIPS; 3/4CORP 10004709 360 001 166 2.315

* 4 IPS/DIPS; 3/4FPT 10004711 360 001 167 2.337

6 IPS/DIPS 3/4CORP 10004734 360 001 183 2.998

* 6 IPS/DIPS; 3/4FPT 10004736 360 001 184 2.579

8 IPS; 3/4 CORP 10007753 360 001 208 2.315* 8 IPS; 3/4 FPT 10007754 360 001 209 2.006

Clamp Type R(inch)

A(inch)

H(inch)

W(inch)

B(inch)

Box Qty

Under Clamp(B) 1.19 3.25 3.27 3.59 2.50 10

Under Clamp(B) 1.19 3.25 3.27 3.59 2.50 10

Under Clamp(C) 1.75 3.25 3.25 4.50 2.50 10

Under Clamp(C) 1.75 3.25 3.25 4.50 2.50 10

Under Clamp(G) 2.35 3.25 3.80 6.26 2.50 5

Under Clamp(G) 2.35 3.25 3.80 6.26 2.50 5

Under Clamp(G) 3.34 3.25 4.50 9.00 2.50 5

Under Clamp(G) 3.34 3.25 4.50 9.00 2.50 5

Top LoadClamp (H) 4.31 3.25 2.50 6.10 2.50 10

Top LoadClamp (H) 4.31 3.25 2.50 6.10 2.50 10

53

ELECTROFUSION FITTINGS: TRANSITION SADDLEPE3408/PE4710Outlet Size: 3/4"

• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM F1055• Approval: AWWA C906• Standard: ANSI B1.20.1• Approval: NSF-61• *Approval: ASTM D2513Outlet Material: Stainless 316Compression Ring Material: Stainless 304Please call for more information on availability, pricing, other sizes and dimensions. <...> Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)

2 IPS; 3/4 FPT 10004667 360 001 138 2.116* 2 IPS; 3/4 FPT 10010918 360 021 399 2.116

2 IPS; 3/4 FPT 10010936 360 001 400 0.0023 IPS; 3/4 FPT 10004680 360 001 153 2.315

* 3 IPS; 3/4 FPT 10012075 360 001 406 0.0024 IPS/DIPS; 3/4

FPT 10004694 360 001 168 2.381

* 4 IPS/DIPS; 3/4FPT 10012076 360 021 412 2.337

6 IPS/DIPS; 3/4FPT 10004710 360 001 185 2.535

* 6 IPS/DIPS; 3/4FPT 10014766 2.540

8 IPS; 3/4 FPT 10007759 360 001 210 2.579

Clamp Type R(inch)

A(inch)

H(inch)

W(inch)

B(inch)

Box Qty

Under Clamp(B) 1.19 3.25 3.18 3.59 2.50 10

Under Clamp(B) 1.19 3.25 3.18 3.59 2.50 10

Under Clamp(B) 1.19 3.25 3.18 3.59 2.50 10

Under Clamp(C) 1.25 3.25 3.18 4.60 2.50 10

Under Clamp(C) 1.75 3.25 3.18 4.60 2.50 10

Under Clamp(G) 2.35 3.25 3.80 6.26 2.50 5

Under Clamp(G) 2.35 3.25 3.80 6.26 2.50 5

Under Clamp(G) 3.34 3.25 4.96 8.68 2.50 5

Under Clamp(G) 3.34 3.25 4.96 8.68 2.50 5

Top LoadClamp (H) 4.31 3.25 2.96 5.92 2.50 10

54

ELECTROFUSION FITTINGS: TRANSITION SADDLEPE3408/PE4710, Top Load Clamp (H)Outlet Size: 3/4"

• Pin Type: 4.7S (4.7 Solid Pin)• Approval: ASTM F1055• Approval: AWWA C906• Approval: NSF-61• *Approval: ANSI B1.20.1• **Approval: ASTM D2513; ANSI B1.20.1Outlet Material: Brass 360 AlloyCompression Ring Material: Stainless 304Please call for more information on availability, pricing, other sizes and dimensions. <...> Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)R

(inch)A

(inch)H

(inch)W

(inch)B

(inch)Box Qty

8 DIPS; 3/4CORP 10004725 360 001 200 2.006 4.53 3.25 2.50 6.10 2.50 10

10 IPS; 3/4CORP 10004648 360 001 110 2.513 5.38 3.25 2.50 6.10 2.50 10

10 DIPS; 3/4CORP 10004639 360 001 102 2.756 5.55 3.25 2.50 6.10 2.50 10

* 10 IPS; 3/4 FPT 10004732 360 001 111 2.756 5.38 3.25 2.50 6.10 2.50 1012 DIPS; 3/4

CORP 10004655 360 001 121 2.381 6.60 3.25 2.50 6.10 2.50 10

12 IPS; 3/4CORP 10006027 360 001 128 2.557 6.38 3.25 2.50 6.10 2.50 10

** 12 IPS; 3/4 FPT 10008920 360 001 129 2.579 6.38 3.25 2.50 6.10 2.50 10

55

ELECTROFUSION FITTINGS: TRANSITION SADDLEPE3408/PE4710, Top Load Clamp (H)Outlet Size: 3/4"

• Pin Type: 4.7S (4.7 Solid Pin)• Approval: ASTM F1055• Approval: AWWA C906• Standard: ANSI B1.20.1• Approval: NSF-61Outlet Material: Stainless 316Compression Ring Material: Stainless 304Please call for more information on availability, pricing, other sizes and dimensions.

Main Size(inch)

GFCPPart No.

GFPart No.

weight(lb)

R(inch)

A(inch)

H(inch)

W(inch)

B(inch)

Box Qty

8 DIPS; 3/4 FPT 10004640 360 001 201 2.381 4.53 3.25 1.94 6.10 2.50 1510 DIPS; 3/4

FPT 10004654 360 001 103 2.646 5.55 3.25 2.21 6.10 2.50 15

10 IPS; 3/4 FPT 10010396 360 003 708 2.646 5.38 3.25 2.44 6.10 2.50 1010 IPS; 3/4 FPT 10013654 360 029 071 2.646 5.38 3.25 2.44 6.10 2.50 10

56

ELECTROFUSION FITTINGS: TRANSITION SADDLEPE3408/PE4710, Top Load Clamp (H)Outlet Size: 1"

• Pin Type: 4.7S (4.7 Solid Pin)• Approval: ASTM F1055• Approval: AWWA C906• Approval: NSF-61• *Approval: ANSI B1.20.1Outlet Material: Brass 360 AlloyCompression Ring Material: Stainless 304Please call for more information on availability, pricing, other sizes and dimensions. <...> Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)R

(inch)A

(inch)H

(inch)W

(inch)B

(inch)Box Qty

8 DIPS; 1 CORP 10004644 360 001 202 2.006 4.53 3.25 2.50 6.10 2.50 10* 8 DIPS; 1 FPT 10004731 360 001 203 2.337 4.53 3.25 2.50 6.10 2.50 10

8 IPS; 1 CORP 10007529 360 001 212 2.337 4.31 3.25 2.50 6.10 2.50 10* 10 DIPS; 1 FPT 10004641 360 001 105 2.359 5.55 3.25 2.50 6.10 2.50 10

10 IPS; 1 CORP 10004647 360 001 112 2.359 5.38 3.25 2.50 6.10 2.50 10* 10 IPS; 1 FPT 10004649 360 001 113 2.469 5.38 3.25 2.50 6.10 2.50 10

10 DIPS; 1CORP 10004730 360 001 104 2.381 5.55 3.25 2.50 6.10 2.50 10

* 12 DIPS; 1 FPT 10004642 360 001 123 2.403 6.60 3.25 2.50 6.10 2.50 1012 DIPS; 1

CORP 10004658 360 001 122 2.227 6.60 3.25 2.50 6.10 2.50 10

* 12 IPS; 1 FPT 10004662 360 001 131 2.579 6.38 3.25 2.50 6.10 2.50 1012 IPS; 1 CORP 10004661 360 001 130 2.183 6.38 3.25 2.50 6.10 2.50 10

16 DIPS; 1CORP 10014110 360 029 072 2.006 8.70 3.25 2.50 6.10 2.50 10

57

ELECTROFUSION FITTINGS: TRANSITION SADDLEPE3408/PE4710Outlet Size: 1"

• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM F1055• Approval: AWWA C906• Standard: ANSI B1.20.1• Approval: NSF-61• *Approval: ASTM D2513; F1055; AWWA C906Outlet Material: Stainless 316Compression Ring Material: Stainless 304Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. <...> Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)

2 IPS; 1 FPT 10004670 360 001 141 1.808* 3 IPS; 1 FPT 10012661 360 021 408 2.050

3 IPS; 1 FPT 10004683 360 001 156 2.0504 IPS/DIPS; 1

FPT 10004697 360 001 171 2.006

6 IPS/DIPS; 1FPT 10004714 360 001 188 1.830

8 IPS; 1 FPT 10007760 360 001 214 2.006

Clamp Type R(inch)

A(inch)

H(inch)

W(inch)

B(inch)

Box Qty

Under Clamp(B) 1.19 3.25 3.25 3.59 2.88 10

Under Clamp(C) 1.75 3.25 3.25 4.50 2.88 10

Under Clamp(C) 1.75 3.25 3.25 4.50 2.88 10

Under Clamp(G) 2.35 3.25 3.80 6.26 2.88 5

Under Clamp(G) 3.34 3.25 4.50 9.00 2.88 5

Top LoadClamp (H) 4.31 3.25 2.50 6.10 2.88 10

58


• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM F1055• Approval: AWWA C906• Approval: NSF-61• *Approval: ANSI B1.20.1Outlet Material: Brass 360 AlloyCompression Ring Material: Stainless 304Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. <...> Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)

2 IPS; 1 CORP 10004682 360 001 139 2.006* 2 IPS; 1 FPT 10004684 360 001 140 2.006

2 IPS; 1 ACME 10008052 360 021 401 2.006* 3 IPS; 1 FPT 10004698 360 001 155 2.006

3 IPS; 1 ACME 10008054 360 021 407 2.0064 IPS/DIPS; 1

CORP 10004713 360 001 169 2.227

3 IPS; 1 CORP 10004696 360 001 154 1.940

* 4 IPS/DIPS; 1FPT 10004715 360 001 170 2.183

6 IPS/DIPS; 1CORP 10004737 360 001 186 2.381

* 6 IPS/DIPS; 1FPT 10004739 360 001 187 2.425

* 8 IPS; 1 FPT 10007755 360 001 213 2.0288 IPS; 1 CORP 10007757 360 001 211 2.161

Clamp Type R(inch)

A(inch)

H(inch)

W(inch)

B(inch)

Box Qty

Under Clamp(B) 1.19 3.25 3.25 3.59 2.50 10

Under Clamp(B) 1.19 3.25 3.25 3.59 2.50 10

Under Clamp(B) 1.19 3.25 3.25 3.59 2.50 10

Under Clamp(C) 1.75 3.25 3.25 4.50 2.50 10

Under Clamp(C) 1.75 3.25 3.25 4.50 2.50 10

Under Clamp(G) 2.35 3.25 3.80 6.26 2.50 5

Under Clamp(C) 1.75 3.25 3.25 4.50 2.50 10

Under Clamp(G) 2.35 3.25 3.25 6.26 2.50 5

Under Clamp(G) 3.34 3.25 4.50 9.00 2.50 5

Under Clamp(G) 3.34 3.25 4.50 9.00 2.50 5

Top LoadClamp (H) 4.31 3.25 2.50 6.10 2.50 10

Top LoadClamp (H) 4.31 3.25 2.50 6.10 2.50 10

59


• Pin Type: 4.7S (4.7 Solid Pin)• Approval: ASTM F1055• Approval: AWWA C906• Standard: ANSI B1.20.1• Approval: NSF-61Outlet Material: Stainless 316Compression Ring Material: Stainless 304Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures.

Main Size(inch)

GFCPPart No.

GFPart No.

weight(lb)

R(inch)

A(inch)

H(inch)

W(inch)

B(inch)

Box Qty

12 DIPS; 1 FPT 10004657 360 001 124 2.315 6.60 3.25 2.50 6.10 2.50 1012 IPS; 1 FPT 10004663 360 001 132 2.315 6.38 3.25 2.50 6.10 2.50 10

60

ELECTROFUSION FITTINGS: TRANSITION SADDLEPE3408/PE4710Outlet Size: 1 1/4"


(inch)GFCP

Part No.GF

Part No.weight

(lb)

2 IPS; 1 1/4CORP 10004672 360 001 142 1.742

* 2 IPS; 1 1/4FPT 10004687 360 001 143 2.006

2 IPS; 1 1/4ACME 10010325 360 021 402 2.006

3 IPS; 1 1/4CORP 10004685 360 001 157 1.742

* 3 IPS; 1 1/4FPT 10004701 360 001 158 2.006

3 IPS; 1 1/4ACME 10010326 360 021 409 2.006

4 IPS/DIPS; 11/4 CORP 10004675 360 001 172 1.874

* 4 IPS/DIPS; 11/4 FPT 10004718 360 001 173 1.852

6 IPS/DIPS; 11/4 CORP 10004716 360 001 189 2.050

* 6 IPS/DIPS; 11/4 FPT 10004741 360 001 190 2.072

* 8 IPS; 1 1/4FPT 10007756 360 001 215 2.359

Clamp Type R(inch)

A(inch)

H(inch)

W(inch)

B(inch)

Box Qty

Under Clamp(B) 1.19 3.25 3.25 3.59 2.50 10

Under Clamp(B) 1.19 3.25 3.25 3.59 2.50 10

Under Clamp(B) 1.19 3.25 3.25 3.59 2.50 10

Under Clamp(C) 1.75 3.25 3.25 4.50 2.50 10

Under Clamp(C) 1.75 3.25 3.25 4.50 2.50 10

Under Clamp(C) 1.75 3.25 3.25 4.50 2.50 10

Under Clamp(G) 2.35 3.25 3.80 6.26 2.50 5

Under Clamp(G) 2.35 3.25 3.80 6.26 2.50 5

Under Clamp(G) 3.34 3.25 4.50 9.00 2.50 5

Under Clamp(G) 3.34 3.25 4.50 9.00 2.50 5

Top LoadClamp (H) 4.31 3.25 2.50 6.10 2.50 10

61

ELECTROFUSION FITTINGS: TRANSITION SADDLEPE3408/PE4710, Top Load Clamp (H)Outlet Size: 1 1/4"

• Pin Type: 4.7S (4.7 Solid Pin)• Approval: ASTM F1055• Approval: AWWA C906• Standard: ANSI B1.20.1• Approval: NSF-61Outlet Material: Brass 360 AlloyCompression Ring Material: Stainless 304Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures.

Main Size(inch)

GFCPPart No.

GFPart No.

weight(lb)

R(inch)

A(inch)

H(inch)

W(inch)

B(inch)

Box Qty

10 IPS; 1 1/4FPT 10004650 360 001 114 2.359 5.38 3.25 2.50 6.10 2.50 10

62


• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM F1055• Approval: AWWA C906• Standard: ANSI B1.20.1• Approval: NSF-61Outlet Material: Stainless 316Compression Ring Material: Stainless 304Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures.

Main Size(inch)

GFCPPart No.

GFPart No.

2 IPS; 1 1/4FPT 10004673 360 001 144

3 IPS; 1 1/4FPT 10004686 360 001 159

4 IPS/DIPS; 11/4 FPT 10004700 360 001 174

6 IPS/DIPS; 11/4 FPT 10004717 360 001 191

8 IPS; 1 1/4FPT 10007761 360 001 216

Weight(lb)

Clamp Type R(inch)

A(inch)

H(inch)

W(inch)

B(inch)

Box Qty

1.650 Under Clamp(B) 1.19 3.25 3.25 3.59 2.50 10

2.000 Under Clamp(C) 1.75 3.25 3.25 4.50 2.50 10

2.000 Under Clamp(G) 2.35 3.25 3.80 6.26 2.50 10

2.070 Under Clamp(G) 3.34 3.25 4.50 9.00 2.50 5

2.200 Top LoadClamp (H) 4.31 3.25 2.50 6.10 2.50 10

63



(inch)GFCP

Part No.GF

Part No.weight

(lb)

2 IPS; 1 1/2CORP 10004688 360 001 145 2.006

* 2 IPS; 1 1/2FPT 10004690 360 001 146 2.006

2 IPS; 1 1/2ACME 10008051 360 021 403 2.006

3 IPS; 1 1/2CORP 10004702 360 001 160 1.742

* 3 IPS; 1 1/2FPT 10004704 360 001 161 2.050

3 IPS; 1 1/2ACME 10008053 360 021 410 2.601

4 IPS/DIPS; 11/2 CORP 10004719 360 001 175 1.852

* 4 IPS/DIPS; 11/2 CORP 10004721 360 001 176 2.138

6 IPS/DIPS; 11/2 CORP 10004742 360 001 192 2.161

* 6 IPS/DIPS; 11/2 FPT 10004744 360 001 193 2.535

* 8 IPS; 1 1/2FPT 10007752 360 001 218 2.161

8 IPS; 1 1/2CORP 10007758 360 001 217 1.896

12 IPS; 1 1/2FPT 10008055 360 003 709 2.094

Clamp Type R(inch)

A(inch)

H(inch)

W(inch)

B(inch)

Box Qty

Under Clamp(B) 1.19 3.25 3.25 3.59 2.87 10

Under Clamp(B) 1.75 3.25 3.25 3.59 2.87 10

Under Clamp(B) 1.19 3.25 3.25 3.59 2.87 10

Under Clamp(C) 1.75 3.25 3.25 4.50 2.87 10

Under Clamp(C) 1.75 3.25 3.25 4.50 2.87 10

Under Clamp(C) 1.75 3.25 3.25 4.50 2.87 10

Under Clamp(G) 2.35 3.25 3.80 6.26 2.87 5

Under Clamp(G) 2.35 3.25 3.80 6.26 2.87 5

Under Clamp(G) 3.34 3.25 4.50 9.00 2.87 5

Under Clamp(G) 3.34 3.25 4.50 9.00 2.87 5

Top LoadClamp (H) 4.31 3.25 2.50 6.10 2.87 10

Top LoadClamp (H) 4.31 3.25 2.50 6.10 2.87 10

Top LoadClamp (H) 6.38 3.25 2.50 6.10 2.87 5

64


• Pin Type: 4.7S (4.7 Solid Pin)• Approval: ASTM F1055• Approval: AWWA C906• Approval: NSF-61• *Approval: ANSI B1.20.1Outlet Material: Brass 360 AlloyCompression Ring Material: Stainless 304Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. <...> Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)R

(inch)A

(inch)H

(inch)W

(inch)B

(inch)Box Qty

8 DIPS; 1 1/2CORP 10004726 360 001 204 2.028 4.53 3.25 2.50 6.10 2.87 10

* 8 DIPS; 1 1/2FPT 10004733 360 001 205 2.006 4.53 3.25 2.50 6.10 2.87 10

10 DIPS; 1 1/2CORP 10004643 360 001 106 2.138 5.55 3.25 2.50 6.10 2.87 10

10 IPS; 1 1/2CORP 10004646 360 001 115 2.138 5.38 3.25 2.50 6.10 2.87 10

* 10 DIPS; 1 1/2FPT 10004652 360 001 107 2.579 5.55 3.25 2.50 6.10 2.87 10

* 10 IPS; 1 1/2FPT 10007561 360 001 117 2.579 5.38 3.25 2.50 6.10 2.87 10

* 10 IPS; 1 1/2FPT 10007627 360 001 116 2.579 5.38 3.25 2.50 6.10 2.87 10

12 DIPS; 1 1/2CORP 10004659 360 001 125 2.161 6.60 3.25 2.50 6.10 2.87 10

65


• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM F1055• Approval: AWWA C906• Standard: ANSI B1.20.1• Approval: NSF-61Outlet Material: Stainless 316Compression Ring Material: Stainless 304Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures.

Main Size(inch)

GFCPPart No.

GFPart No.

weight(lb)

2 IPS; 1 1/2FPT 10004676 360 001 147 1.896

3 IPS; 1 1/2FPT 10004689 360 001 162 1.896

4 IPS/DIPS; 11/2 FPT 10004703 360 001 177 2.161

6 IPS/DIPS; 11/2 FPT 10004720 360 001 194 2.535

8 IPS; 1 1/2FPT 10004743 360 001 219 2.535

Clamp Type R(inch)

A(inch)

H(inch)

W(inch)

B(inch)

Box Qty

Under Clamp(B) 1.19 3.25 3.25 3.59 2.87 10

Under Clamp(C) 1.75 3.25 3.25 4.50 2.87 10

Under Clamp(G) 2.35 3.25 3.80 6.26 2.87 5

Under Clamp(G) 2.34 3.25 4.50 9.00 2.87 5

Top LoadClamp (H) 4.31 3.25 2.50 6.10 2.87 5

66


• Pin Type: 4.7S (4.7 Solid Pin)• Approval: ASTM F1055• Approval: AWWA C906• Standard: ANSI B1.20.1• Approval: NSF-61Outlet Material: Stainless 316Compression Ring Material: Stainless 304Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures.

Main Size(inch)

GFCPPart No.

GFPart No.

weight(lb)

R(inch)

A(inch)

H(inch)

W(inch)

B(inch)

Box Qty

10 IPS; 1 1/2FPT 10007561 360 001 117 2.579 5.38 3.25 2.50 6.10 2.63 10

67


• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM D2513• Approval: ASTM F1055• Approval: AWWA C906• Standard: ANSI B1.20.1• Approval: NSF-61• *Approval: ASTM F1055; AWWA C906; NSF-61Outlet Material: Brass 360 AlloyCompression Ring Material: Stainless 304Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. <...> Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)

2 IPS; 2 FPT 10004678 360 001 149 2.0063 IPS; 2 FPT 10004692 360 001 164 2.006

* 4 IPS/DIPS; 2CORP 10004705 360 001 178 2.734

4 IPS/DIPS; 2FPT 10004707 360 001 180 3.704

6 IPS/DIPS; 2FPT 10004722 360 001 198 4.497

* 6 IPS/DIPS; 2CORP 10004746 360 001 195 3.792

* 8 IPS; 2 CORP 10007751 360 001 220 3.5948 IPS; 2 FPT 10007763 360 001 221 4.057

Clamp Type R(inch)

A(inch)

H(inch)

W(inch)

B(inch)

Box Qty

Under Clamp(B) 1.19 3.50 3.27 3.59 3.25 10

Under Clamp(C) 1.75 3.50 4.12 4.60 3.25 5

Under Clamp(G) 2.35 3.50 3.80 6.26 3.25 5

Under Clamp(G) 2.35 3.50 3.80 6.26 3.25 5

Under Clamp(G) 3.34 3.50 4.50 9.00 3.25 5

Under Clamp(G) 3.34 3.50 4.50 9.00 3.25 5

Top LoadClamp (H) 4.31 3.50 2.50 6.10 3.25 5

Top LoadClamp (H) 4.31 3.50 2.50 6.10 3.25 5

68


• Pin Type: 4.7S (4.7 Solid Pin)• Approval: ASTM F1055• Approval: AWWA C906• Approval: NSF-61• *Approval: ANSI B1.20.1Outlet Material: Brass 360 AlloyCompression Ring Material: Stainless 304Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. <...> Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)R

(inch)A

(inch)H

(inch)W

(inch)B

(inch)Box Qty

* 8 DIPS; 2 FPT 10004656 360 001 207 4.277 4.53 3.50 2.50 6.10 3.25 58 DIPS; 2 CORP 10004729 360 001 206 3.858 4.53 3.50 2.50 6.10 3.25 5

10 DIPS; 2CORP 10004645 360 001 108 4.145 5.55 3.50 2.50 6.10 3.25 5

10 IPS; 2 CORP 10004651 360 001 118 3.836 5.38 3.50 2.50 6.10 3.25 5* 10 IPS; 2 FPT 10004653 360 001 119 4.431 5.38 3.50 2.50 6.10 3.25 5

10 DIPS; 2 FPT 10009837 360 001 109 4.431 5.55 3.50 2.50 6.10 3.25 512 IPS; 2 CORP 10004664 360 001 133 3.990 6.38 3.50 2.50 6.10 3.25 5

* 12 IPS; 2 FPT 10004665 360 001 134 2.227 6.38 3.50 2.50 6.10 3.25 5* 12 DIPS; 2 FPT 10004727 360 001 127 2.271 6.60 3.50 2.50 6.10 3.25 5

12 DIPS; 2CORP 10004728 360 001 126 3.880 6.60 3.50 2.50 6.10 3.25 5

* 16 DIPS; 2 FPT 10014111 360 029 073 3.880 8.70 3.50 2.50 6.10 3.25 5

69


• Pin Type: 4.7R (4.7 Pin with Resistor)• Approval: ASTM D2513• Approval: ASTM F1055• Approval: AWWA C906• Standard: ANSI B1.20.1• Approval: NSF-61Outlet Material: Stainless 316Compression Ring Material: Stainless 304Please call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures.

Main Size(inch)

GFCPPart No.

GFPart No.

weight(lb)

2 IPS; 2 FPT 10007108 360 001 148 1.8742 IPS; 2 FPT 10010878 360 021 404 1.8743 IPS; 2 FPT 10004691 360 001 163 3.5053 IPS; 2 FPT 10010879 360 021 411 1.940

4 IPS/DIPS; 2FPT 10004706 360 001 179 3.704

4 IPS/DIPS; 2FPT 10010880 360 021 414 3.704

4 IPS/DIPS; 2FPT 10010937 360 021 413 3.704

6 IPS/DIPS; 2FPT 10004723 360 001 196 4.497

6 IPS/DIPS; 2FPT 10010881 360 021 416 4.497

6 IPS/DIPS; 2FPT 10010938 360 021 415 4.497

8 IPS; 2 FPT 10009044 360 001 222 4.05710 IPS; 2 FPT 10010939 360 021 398 3.990

10 IPS/DIPS; 2FPT 10014826 4.000

Clamp Type R(inch)

A(inch)

H(inch)

W(inch)

B(inch)

Box Qty

Under Clamp(B) 1.19 3.50 3.25 3.59 3.25 5

Under Clamp(B) 1.19 3.50 3.25 3.59 3.25 5

Under Clamp(C) 1.75 3.50 3.25 4.50 3.25 5

Under Clamp(C) 1.75 3.50 3.25 4.50 3.25 5

Under Clamp(D) 2.34 3.50 3.80 6.26 3.25 5

Under Clamp(G) 2.34 3.50 3.80 6.26 3.25 5

Under Clamp(G) 2.34 3.50 3.80 6.26 3.25 5

Under Clamp(G) 3.34 3.50 4.50 9.00 3.25 5

Under Clamp(G) 3.34 3.50 4.50 9.00 3.25 5

Under Clamp(G) 3.34 3.50 4.50 9.00 3.25 5

Top LoadClamp (H) 4.31 3.50 2.50 6.10 3.25 5

Top LoadClamp (H) 5.38 3.50 2.50 6.10 3.25 5

Top LoadClamp (H) 5.50 3.50 2.50 6.10 3.25 5

70

Gasketed Sewer Saddles

ELECTROFUSION FITTINGS: GASKETED SEWER SADDLEwith IPS Gasketed Outlet, T-Clamp (K)PE3408/PE4710

• Pin Type: 4.7S (4.7 Solid Pin)8" - 48" IPS and DIPS Base with IPS/Schedule 40 GasketPlease call for more information on availability, pricing, other sizes and dimensions.

Size GFCPPart No.

GFPart No.

weight(lb)

A(inch)

D(inch)

W(inch)

Box Qty

10 IPS, 6 IPS 10009117 360 000 947 7.011 3.00 8.63 10.60 112 IPS, 6 IPS 10009118 360 000 950 7.496 3.00 8.63 10.60 114 IPS, 6 IPS 10009119 360 000 953 7.253 3.00 8.63 10.60 116 IPS, 6 IPS 10009120 360 000 956 8.003 3.00 8.63 10.60 118 IPS, 6 IPS 10009121 360 000 959 7.253 3.00 8.63 10.60 124 IPS, 6 IPS 10009122 360 000 964 7.253 3.00 8.63 10.60 130 IPS, 6 IPS 10009123 360 000 966 7.253 3.00 8.63 10.60 132 IPS, 6 IPS 10009124 360 000 968 7.253 3.00 8.63 10.60 134 IPS, 6 IPS 10009125 360 000 970 7.253 3.00 8.63 10.60 136 IPS, 6 IPS 10009126 360 000 972 7.253 3.00 8.63 10.60 142 IPS, 6 IPS 10009127 360 000 974 7.253 3.00 8.63 10.60 148 IPS, 6 IPS 10009128 360 000 976 7.253 3.00 8.63 10.60 120 IPS, 6 IPS 10009130 360 003 707 7.253 3.00 8.63 10.60 1

8 IPS, 6 IPS 5758423 360 000 980 7.011 3.00 8.63 10.60 18 IPS, 6 IPS 5758438 360 000 981 0.002 3.00 8.63 10.60 1

71

ELECTROFUSION FITTINGS: GASKETED SEWER SADDLE PE3408/PE4710, T-Clamp (K)DR35

• Pin Type: 4.7S (4.7 Solid Pin)6" and Multi-Base with IPS/Schedule 40 and PSM/DR35 GasketsPlease call for more information on availability, pricing, other sizes and dimensions.

Size GFCPPart No.

GFPart No.

weight(lb)

A(inch)

D(inch)

W(inch)

Box Qty

10 IPS, 6 PSM 10009080 360 000 948 7.121 3.00 8.63 10.60 112 IPS, 6 PSM 10009081 360 000 951 7.496 3.00 8.63 10.60 116 IPS, 6 PSM 10009082 360 000 957 3.197 3.00 8.63 10.60 120 IPS, 6 PSM 10009083 360 000 961 6.107 3.00 8.63 10.60 124 IPS, 6 PSM 10009084 360 000 965 0.002 3.00 8.63 10.60 130 IPS, 6 PSM 10009085 360 000 967 7.011 3.00 8.63 10.60 132 IPS, 6 PSM 10009086 360 000 969 7.011 3.00 8.63 10.60 134 IPS, 6 PSM 10009087 360 000 971 7.011 3.00 8.63 10.60 136 IPS, 6 PSM 10009088 360 000 973 7.011 3.00 8.63 10.60 1

42 IPS, 6 IPS 10009089 360 000 975 7.011 3.00 8.63 10.60 148 IPS, 6 PSM 10009090 360 000 977 7.011 3.00 8.63 10.60 114 IPS, 6 PSM 10009091 360 000 954 6.526 3.00 8.63 10.60 118 IPS, 6 PSM 10009092 360 000 960 6.878 3.00 8.63 10.60 122 IPS, 6 PSM 10009134 360 000 962 0.002 3.00 8.63 10.60 1

6 IPS, 4 PSM 5750952 360 000 978 3.990 3.00 8.63 10.60 88 IPS, 6 PSM 5758378 360 000 982 8.510 3.00 8.63 10.60 18 IPS, 6 PSM 5758437 360 000 983 8.356 3.00 8.63 10.60 1

72

WYEs

ELECTROFUSION FITTINGS: WYEPE3408/PE4710, DR17, O- ClampOutlet Size: 6" IPS, Main Size IPS

• Outlet Wall: DR17• Pin Type: 4.7S (4.7 Solid Pin)Note: Non-Pressure Applications OnlyPlease call for more information on availability, pricing, other sizes and dimensions. The productslisted are standard stocking options. However, GF Central Plastics offers thousands of differentconfigurations as well as custom innovative structures. Main Size

(inch)GFCP

Part No.GF

Part No.weight

(lb)D

(inch)H

(inch)W

(inch)L

(inch)Box Qty

8 10002998 360 021 143 17.020 6.63 15.00 14.37 19.50 110 10003000 360 021 142 14.110 6.63 15.00 14.37 19.50 1

73

Flex Restraints

ELECTROFUSION FITTINGS: Flex RestraintMain Size 6" - 63", N-Ratchet Strap ClampAxial Resistance - 9,000 lbs.

• Pin Type: 4.7S (4.7 Solid Pin)Note: Works on solid wall pipe 6" IPS and larger.Please call for more information on availability, pricing, other sizes and dimensions.

Description GFCPPart No.

GFPart No.

weight(lb)

H(inch)

W(inch)

L(inch)

Box Qty

PE3408/PE4710 10004637 360 000 070 0.419 2.91 2.56 4.92 40

PE3408/PE4710 10012301 360 021 381 0.441 2.91 2.56 4.92 40

Polypropylene 10012442 360 021 380 0.419 2.91 2.56 4.92 40

Index

74

Part No. Page

10000202 410000204 410000205 410000207 410000208 410000210 410000211 410000213 410000214 410000216 410000218 410000353 310000354 310000355 310000356 310000357 310000358 210000359 210000360 210000361 210000362 210000363 210000477 1010000479 1010000481 1010000518 1010000823 4010001613 110001682 110002998 7210003000 7210003085 2210003171 2610003355 3110003452 3110003536 4210003537 1810003547 4210003560 4410003561 1510003701 3110003795 4610003796 4710003798 2210003816 910003849 4710003869 910003970 210004508 4410004512 4410004516 4410004525 4210004543 4210004561 610004563 610004564 610004565 610004566 610004567 610004571 210004573 210004578 2

Part No. Page

10004579 210004580 210004581 410004582 1510004587 2210004588 1810004592 2310004594 1610004595 910004598 1410004604 1610004610 1410004611 1610004613 1410004614 1610004616 1510004617 1610004618 1810004622 1410004625 910004627 210004628 910004629 910004630 910004637 7310004639 5410004640 5510004641 5610004642 5610004643 6410004644 5610004645 6810004646 6410004647 5610004648 5410004649 5610004650 6110004651 6810004652 6410004653 6810004654 5510004655 5410004656 6810004657 5910004658 5610004659 6410004660 4410004661 5610004662 5610004663 5910004664 6810004665 6810004667 5310004670 5710004672 6010004673 6210004675 6010004676 6510004678 6710004679 5210004680 5310004681 52

Part No. Page

10004682 5810004683 5710004684 5810004685 6010004686 6210004687 6010004688 6310004689 6510004690 6310004691 6910004692 6710004693 5210004694 5310004695 5210004696 5810004697 5710004698 5810004700 6210004701 6010004702 6310004703 6510004704 6310004705 6710004706 6910004707 6710004709 5210004710 5310004711 5210004713 5810004714 5710004715 5810004716 6010004717 6210004718 6010004719 6310004720 6510004721 6310004722 6710004723 6910004725 5410004726 6410004727 6810004728 6810004729 6810004730 5610004731 5610004732 5410004733 6410004734 5210004736 5210004737 5810004739 5810004741 6010004742 6310004743 6510004744 6310004746 6710004749 2910004760 3710004761 2910004780 3710004781 23

Part No. Page

10004790 2210004792 3110004794 2310004806 3710004808 3410004810 2210004820 3110004823 3110004824 3710004825 3710004826 3710004828 2210004845 2210004846 3710004847 3710004858 3110004867 610005918 4410006024 1410006027 5410006028 2310006029 2310006437 4410006438 4610006439 4410006440 4610006441 4510006442 4610006445 4510006446 4610006449 4510006450 4610006453 4410006455 4610006457 4410006459 4610006461 4710006463 4410006465 4610006467 4710006469 4510006471 4610006473 4510006475 4610006477 4510006643 2210006644 1810007108 6910007238 910007328 3110007349 3110007380 2210007392 910007505 1510007529 5610007561 64, 6610007627 6410007711 4210007719 1610007720 1410007751 6710007752 63

Index

75

Part No. Page

10007753 5210007754 5210007755 5810007756 6010007757 5810007758 6310007759 5310007760 5710007761 6210007763 6710008051 6310008052 5810008053 6310008054 5810008055 6310008218 910008645 2210008654 3010008687 3010008849 910008888 710008920 5410009044 6910009080 7110009081 7110009082 7110009083 7110009084 7110009085 7110009086 7110009087 7110009088 7110009089 7110009090 7110009091 7110009092 7110009093 4910009094 4910009095 4910009096 4910009097 4910009098 4910009099 4910009100 4910009101 4910009102 4910009103 4910009105 4810009106 4810009107 4810009108 4810009109 4810009110 4810009111 4810009112 4810009113 4810009114 4810009115 4810009117 7010009118 7010009119 7010009120 70

Part No. Page

10009121 7010009122 7010009123 7010009124 7010009125 7010009126 7010009127 7010009128 7010009129 4910009130 7010009131 4810009132 4910009134 7110009136 4810009138 4910009139 4810009140 4810009200 4710009201 4710009202 4610009203 4610009271 4910009314 1510009352 4910009385 2410009386 3510009387 3110009388 2810009389 2910009391 3710009392 2610009393 3510009394 3110009395 3110009396 3410009397 2610009398 2810009399 2810009401 2610009402 2610009403 2810009405 2610009407 2710009408 2810009410 2210009411 2210009492 4010009495 1710009496 1910009497 1710009498 1910009499 1710009500 1910009501 1710009502 1910009529 4810009661 2110009662 1910009664 1710009665 2110009666 1910009668 17

Part No. Page

10009669 2110009670 1910009672 1710009673 2110009674 1910009676 1710009688 1910009690 1910009695 1710009696 1910009717 1910009718 1710009719 1910009720 1910009722 1710009723 1910009724 1710009725 1910009727 1710009728 1910009729 1910009730 1710009731 1910009734 1710009754 1910009837 6810009892 2110009899 5010009900 5010009901 5010009902 5010009903 5010009904 5010009905 5010009906 5010009907 5010009908 5010009909 5010009910 5110009911 5110009912 5110009913 5110009914 5110009915 5110009916 5110009917 5110009918 5110009919 5110009920 5110009921 5010009922 5110009923 5010009924 5110009925 5010009926 5110009927 5110009929 5010009931 5010010030 5010010093 3110010109 2110010224 50

Part No. Page

10010325 6010010326 6010010395 4810010396 5510010422 3010010423 3010010424 3010010425 3010010426 3010010427 3010010428 4210010429 4210010430 4210010492 1810010493 1810010494 910010495 2110010496 2010010499 2910010500 3110010501 2910010502 2910010503 3110010504 2910010505 3110010548 3410010553 3410010554 3410010556 3410010557 3410010558 3410010559 3410010561 3410010562 3410010563 2610010564 2610010565 2610010566 3110010588 3310010599 3310010653 4510010654 4510010878 6910010879 6910010880 6910010881 6910010918 5310010936 5310010937 6910010938 6910010939 6910010967 2110010968 2110010969 2110010970 2110010971 2110010974 4010010976 4010010983 3610011052 910011089 24, 3610011090 25

Index

76

Part No. Page

10011092 2510011097 2410011099 2510011102 3610011103 2410011104 2410011105 2510011107 3610011108 2910011110 2410011111 3510011112 2510011114 3610011115 2910011116 2410011117 2410011118 2510011190 1710011196 3610011197 2410011339 210011532 2510011606 2510011620 3610011657 3610011662 2210011663 2210011678 3610011777 1710011778 1710011853 2110012075 5310012076 5310012171 510012182 1410012183 1410012184 1410012185 1410012186 1410012187 1410012188 1410012293 2010012294 1910012301 7310012442 7310012485 3110012489 1510012510 1810012511 1710012512 1710012513 1710012514 1710012661 5710012665 3010012666 3010012667 3010012701 710012874 1110012875 1110012876 1110012877 1110012878 11

Part No. Page

10012886 710012912 1110012913 1110012991 1110013266 3110013267 3110013654 5510013725 4410013860 710013867 710013868 710013869 710013870 710014110 5610014111 6810014208 1510014318 4510014319 4510014321 4410014766 5310014826 69

360 000 070 73360 000 738 44360 000 739 45360 000 740 46360 000 741 44360 000 742 44360 000 744 46360 000 745 46, 47360 000 746 47360 000 747 44360 000 748 45360 000 750 40360 000 751 44360 000 752 44360 000 753 46360 000 754 46360 000 755 47360 000 756 47360 000 759 42360 000 760 40360 000 763 42360 000 764 40360 000 766 40360 000 769 41360 000 772 42360 000 773 40360 000 776 41360 000 780 42360 000 781 44360 000 782 45360 000 783 46360 000 785 42360 000 786 40360 000 787 44360 000 788 46360 000 789 46360 000 790 47360 000 792 50360 000 794 51360 000 795 50360 000 797 50

Part No. Page

360 000 798 51360 000 799 50360 000 800 51360 000 801 50360 000 802 51360 000 803 50360 000 804 50360 000 805 51360 000 806 50360 000 807 51360 000 808 50360 000 809 51360 000 810 51360 000 811 50360 000 812 51360 000 813 50360 000 814 51360 000 815 50360 000 816 51360 000 817 50360 000 818 50360 000 819 51360 000 820 50360 000 821 51360 000 822 50360 000 823 48360 000 824 48360 000 825 49360 000 827 48360 000 828 48360 000 829 49360 000 831 49360 000 832 48360 000 833 49360 000 834 48360 000 835 49360 000 836 48360 000 837 49360 000 838 49360 000 839 48360 000 840 49360 000 841 48360 000 842 49360 000 843 48360 000 844 48360 000 845 49360 000 846 48360 000 847 49360 000 848 48360 000 849 49360 000 850 48360 000 851 49360 000 852 49360 000 853 48360 000 854 49360 000 855 48360 000 856 49360 000 858 7360 000 859 7360 000 860 6360 000 861 6360 000 862 6

Part No. Page

360 000 863 7360 000 864 6360 000 865 7360 000 866 6360 000 867 7360 000 868 6360 000 869 6360 000 870 7360 000 871 6360 000 872 7360 000 873 8360 000 874 6360 000 875 7360 000 876 6360 000 877 7360 000 879 6360 000 880 7360 000 881 8360 000 883 2360 000 884 1360 000 885 2360 000 886 1360 000 887 2360 000 888 1360 000 889 2360 000 890 1360 000 891 2360 000 892 1360 000 893 2360 000 894 1360 000 895 2360 000 896 1360 000 897 2360 000 898 1360 000 899 2360 000 900 1360 000 901 3360 000 902 2360 000 903 2360 000 904 3360 000 905 2360 000 906 2360 000 907 4360 000 909 4360 000 911 4360 000 913 4360 000 915 4360 000 917 4360 000 919 2360 000 920 2360 000 921 1360 000 922 4360 000 924 4360 000 926 4360 000 928 4360 000 930 4360 000 932 4360 000 933 2360 000 934 1360 000 935 3360 000 936 2360 000 937 1

Index

77

Part No. Page

360 000 938 3360 000 939 2360 000 940 1360 000 941 1360 000 942 2360 000 943 3360 000 944 2360 000 945 1360 000 947 70360 000 948 71360 000 950 70360 000 951 71360 000 953 70360 000 954 71360 000 956 70360 000 957 71360 000 959 70360 000 960 71360 000 961 71360 000 962 71360 000 964 70360 000 965 71360 000 966 70360 000 967 71360 000 968 70360 000 969 71360 000 970 70360 000 971 71360 000 972 70360 000 973 71360 000 974 70360 000 975 71360 000 976 70360 000 977 71360 000 978 71360 000 980 70360 000 981 70360 000 982 71360 000 983 71360 000 991 15360 000 995 15360 001 001 21360 001 002 16360 001 003 18360 001 005 14360 001 006 18360 001 007 20360 001 009 18360 001 010 21360 001 011 16360 001 015 14360 001 021 21360 001 025 14360 001 031 16360 001 032 14360 001 033 21360 001 034 18360 001 036 20360 001 039 19360 001 041 16360 001 043 14360 001 044 16

Part No. Page

360 001 045 15360 001 046 21360 001 050 14, 16360 001 053 15360 001 054 20360 001 061 9360 001 062 10360 001 063 10360 001 064 9360 001 065 10360 001 066 9360 001 067 9360 001 068 10360 001 069 9360 001 070 10360 001 071 9360 001 072 10360 001 073 9360 001 074 10360 001 075 9360 001 076 10360 001 077 10360 001 078 9360 001 079 10360 001 080 9360 001 081 9360 001 102 54360 001 103 55360 001 104 56360 001 105 56360 001 106 64360 001 107 64360 001 108 68360 001 109 68360 001 110 54360 001 111 54360 001 112 56360 001 113 56360 001 114 61360 001 115 64360 001 116 64360 001 117 64, 66360 001 118 68360 001 119 68360 001 121 54360 001 122 56360 001 123 56360 001 124 59360 001 125 64360 001 126 68360 001 127 68360 001 128 54360 001 129 54360 001 130 56360 001 131 56360 001 132 59360 001 133 68360 001 134 68360 001 136 52360 001 137 52360 001 138 53360 001 139 58

Part No. Page

360 001 140 58360 001 141 57360 001 142 60360 001 143 60360 001 144 62360 001 145 63360 001 146 63360 001 147 65360 001 148 69360 001 149 67360 001 151 52360 001 152 52360 001 153 53360 001 154 58360 001 155 58360 001 156 57360 001 157 60360 001 158 60360 001 159 62360 001 160 63360 001 161 63360 001 162 65360 001 163 69360 001 164 67360 001 166 52360 001 167 52360 001 168 53360 001 169 58360 001 170 58360 001 171 57360 001 172 60360 001 173 60360 001 174 62360 001 175 63360 001 176 63360 001 177 65360 001 178 67360 001 179 69360 001 180 67360 001 183 52360 001 184 52360 001 185 53360 001 186 58360 001 187 58360 001 188 57360 001 189 60360 001 190 60360 001 191 62360 001 192 63360 001 193 63360 001 194 65360 001 195 67360 001 196 69360 001 198 67360 001 200 54360 001 201 55360 001 202 56360 001 203 56360 001 204 64360 001 205 64360 001 206 68360 001 207 68

Part No. Page

360 001 208 52360 001 209 52360 001 210 53360 001 211 58360 001 212 56360 001 213 58360 001 214 57360 001 215 60360 001 216 62360 001 217 63360 001 218 63360 001 219 65360 001 220 67360 001 221 67360 001 222 69360 001 225 29360 001 226 24360 001 231 35360 001 232 30360 001 233 26360 001 238 31360 001 240 26360 001 243 31360 001 244 28360 001 246 29360 001 247 24360 001 251 37360 001 252 25360 001 256 35360 001 258 23360 001 259 26360 001 267 22360 001 270 26360 001 272 26360 001 276 22360 001 277 31360 001 278 28360 001 282 28360 001 289 37360 001 290 25360 001 292 35360 001 294 23360 001 295 26360 001 303 22360 001 304 31360 001 306 26360 001 310 22360 001 311 31360 001 312 28360 001 315 24360 001 319 25360 001 323 35360 001 325 26360 001 335 26360 001 339 31360 001 340 28360 001 344 28360 001 345 37360 001 346 37360 001 347 23360 001 348 22360 001 349 22

Index

78

Part No. Page

360 001 351 24360 001 355 25360 001 359 35360 001 361 26360 001 370 26360 001 375 31360 001 376 28360 001 379 28360 001 380 37360 001 381 37360 001 382 23360 001 383 22360 001 384 22360 001 386 24360 001 390 25360 001 399 27360 001 400 53360 001 403 31360 001 404 28360 001 406 53360 001 408 28360 001 409 37360 001 410 37360 001 411 23360 001 412 22360 001 413 22360 002 881 19360 002 963 34360 002 964 34360 003 119 35360 003 120 26360 003 121 35360 003 122 28360 003 126 17360 003 127 17360 003 128 17360 003 135 51360 003 136 51360 003 145 30360 003 443 17360 003 444 19360 003 446 17360 003 447 17360 003 448 17360 003 450 19360 003 468 19360 003 469 17360 003 470 19360 003 471 17360 003 472 19360 003 473 17360 003 474 19360 003 475 17360 003 480 17360 003 680 48360 003 700 6360 003 705 42360 003 707 70360 003 708 55360 003 709 63360 003 715 30360 003 724 29

Part No. Page

360 003 725 29360 003 726 29360 003 727 29360 003 728 29360 003 729 37360 003 730 30360 003 731 30360 003 732 30360 003 733 30360 003 734 31360 003 735 31360 003 736 31360 003 737 31360 003 738 31360 003 739 22360 003 740 31360 003 741 22360 003 743 18360 003 744 19360 003 745 19360 003 746 19360 003 748 18360 003 749 17360 003 750 17360 003 751 17360 004 294 6360 004 296 33360 004 297 33360 004 298 33360 004 299 34360 004 300 34360 004 323 36360 004 324 36360 004 325 36360 004 329 24360 004 332 26360 004 333 26360 004 334 26360 004 335 27360 004 336 28360 004 337 28360 004 338 28360 004 339 28360 004 341 21360 004 342 20360 004 343 19360 004 344 19360 004 345 19360 021 099 5360 021 142 72360 021 143 72360 021 144 45360 021 145 46360 021 146 44360 021 147 46360 021 149 47360 021 150 45360 021 151 46360 021 152 44360 021 153 46360 021 155 47360 021 157 42

Part No. Page

360 021 158 40360 021 159 45360 021 160 42360 021 161 40360 021 162 45360 021 163 45360 021 164 46360 021 165 44360 021 167 46360 021 175 50360 021 177 50360 021 200 7360 021 201 7360 021 241 2360 021 264 14360 021 270 15360 021 275 14360 021 278 21360 021 279 21360 021 281 18360 021 284 20360 021 285 20360 021 286 14360 021 288 21360 021 289 21360 021 291 17360 021 293 19360 021 295 19360 021 296 14360 021 299 21360 021 300 21360 021 302 17360 021 304 19360 021 306 19360 021 307 14360 021 310 21360 021 311 21360 021 313 17360 021 314 17360 021 316 19360 021 319 19360 021 320 14360 021 323 15360 021 324 21360 021 325 21360 021 326 21360 021 327 21360 021 330 17360 021 331 17360 021 332 17360 021 333 19360 021 334 14360 021 360 9360 021 371 9360 021 380 73360 021 381 73360 021 382 11360 021 383 11360 021 384 11360 021 385 11360 021 388 11360 021 391 11

Part No. Page

360 021 393 11360 021 396 11360 021 398 69360 021 399 53360 021 401 58360 021 402 60360 021 403 63360 021 404 69360 021 407 58360 021 408 57360 021 409 60360 021 410 63360 021 411 69360 021 412 53360 021 413 69360 021 414 69360 021 415 69360 021 416 69360 021 418 24, 36360 021 425 25360 021 429 25360 021 445 22360 021 446 31360 021 449 26360 021 451 26360 021 460 22360 021 461 34360 021 462 34360 021 473 36360 021 475 36360 021 481 24360 021 482 24360 021 490 25360 021 491 25360 021 494 30360 021 513 31360 021 515 26360 021 517 33360 021 532 34360 021 533 34360 021 534 34360 021 538 24360 021 539 24360 021 541 25360 021 554 26360 021 556 26360 021 565 34360 021 566 34360 021 567 31360 021 575 29360 021 579 24360 021 585 35360 021 586 25360 021 606 26360 021 608 26360 021 610 26360 021 622 34360 021 623 34360 021 624 31360 021 627 30360 021 630 29360 021 633 24

Index

79

Part No. Page

360 021 634 24360 021 639 25360 021 658 27360 021 662 31360 021 666 34360 021 667 34360 021 670 30360 021 673 36360 021 674 36360 021 681 25360 021 693 31360 021 695 27360 021 702 30360 021 706 22360 022 945 10360 029 054 44360 029 056 45360 029 057 45360 029 058 44360 029 059 7360 029 060 7360 029 061 7360 029 062 7360 029 063 7360 029 065 15360 029 071 55360 029 072 56360 029 073 68360 029 103 36360 060 184 9

5750952 715753228 85753234 85753247 75753249 75753251 75753253 75753271 75753273 75753277 75753279 75753281 75757001 15757007 15757008 15757009 15757010 15757030 265757032 265757033 265757034 265757036 265757038 275757042 15757050 265757052 265757053 265757054 265757056 275757058 275757068 105757069 10

Part No. Page

5757070 105757071 105757072 105757073 105757074 105757081 205757083 285757084 265757086 285757087 265757088 265757095 355757097 355757099 355757100 355757102 355757109 215757110 215757111 215757112 215757113 215757114 205757119 205757121 205757124 415757125 415757140 285757141 265757142 285757143 265757145 285757146 335757147 335757148 345757150 285757151 285757152 285757153 285757154 345757157 285757161 255757162 255757163 255757164 255757165 345757166 345757167 255757248 245757249 245757250 245757251 245757253 245757760 225757761 405757762 405757763 405757764 405758378 715758390 475758407 465758423 705758437 71

Part No. Page

5758438 705760001 15760004 15760005 15760006 15760008 15760010 15760012 15760019 25760022 25760023 25760024 25760026 25760028 25760030 25760300 65760303 65760305 65760307 65760309 65760311 6

electrofusion - central plastics · 2020-03-02 · gf central plastics’ electrofusion ﬁttings...

Documents