Electron Top Mfg.

Installation InstructionsAlways Check Stock # and Color Before Starting Installation

rev 9/10/2010

126-15 89th Ave Richmond Hill, NY 11418No part of this material or accompanying drawings or photos may be reproduced in any form, or by any means, without the express permission of Electron Top Mfg..

2004-07 Toyota SolaraTY 7910 Top Built in Glass Window

ST11 Stayfast

Please check the stock number and color before starting the installation.

126-15 89th Ave Richmond Hill, NY 11418No part of this material or accompanying drawings or photos may be reproduced in any form, or by any means, without the express permission of Electron Top Mfg..

Electron Top Mfg.

Page 2

Staple center of the top at the bottom of the window putting the line at the upper edge of the

trim stick.

Pull the top around on the sides and make sure the binding is 1 3/8” ahead of the screw on the

trim stick.

Pull the top down in the curve and have the staple line at the top edge of the trim stick.

Make sure to staple the nylon straps to the trim stick below the window.

126-15 89th Ave Richmond Hill, NY 11418No part of this material or accompanying drawings or photos may be reproduced in any form, or by any means, without the express permission of Electron Top Mfg..

Electron Top Mfg.

Page 3

Lock the rain gutter into the frame of the car. Then bolt the rear trim stick to the frame of the car.

Finish locking the rain gutter to the frame of the car.

Plug the wire back into the wiring harness.

126-15 89th Ave Richmond Hill, NY 11418No part of this material or accompanying drawings or photos may be reproduced in any form, or by any means, without the express permission of Electron Top Mfg..

Electron Top Mfg.

Page 4

Secure the wiring harness to the frame with zip-ties.

Pull the top back over the rear bow. Pull the pad out by the rear bow on the corners and

add extra padding on the bow as shown in the picture above. When this is done run the side

cables through the top.

Let the top back and lock the front corner pock-ets onto the header bow.

Secure the quarter fl aps to both sides of the frame.

126-15 89th Ave Richmond Hill, NY 11418No part of this material or accompanying drawings or photos may be reproduced in any form, or by any means, without the express permission of Electron Top Mfg..

Electron Top Mfg.

Page 5

Glue the front of the pad to the backside of the header bow.

Reference Note:Secure the bow listings.

Fasten the straps to the sides of the top and thenput the weather striping and mouldings back on.

Job well done.

126-15 89th Ave Richmond Hill, NY 11418No part of this material or accompanying drawings or photos may be reproduced in any form, or by any means, without the express permission of Electron Top Mfg..

Electron Top Mfg.

Page 6

Passenger side view rear quarter shot. Passenger side view front quarter shot.

Rear view.

126-15 89th Ave Richmond Hill, NY 11418No part of this material or accompanying drawings or photos may be reproduced in any form, or by any means, without the express permission of Electron Top Mfg..

Electron Top Mfg.

Page 7

126-15 89th Ave Richmond Hill, NY 11418No part of this material or accompanying drawings or photos may be reproduced in any form, or by any means, without the express permission of Electron Top Mfg..

Electron Top Mfg.

Page 8

126-15 89th Ave Richmond Hill, NY 11418No part of this material or accompanying drawings or photos may be reproduced in any form, or by any means, without the express permission of Electron Top Mfg..

Electron Top Mfg.

Page 9