embroidery stabilizer stitch2o
TRANSCRIPT
8” x 10 Yards
HBW
ST-8
E M B R O I D E R Y S T A B I L I Z E R
washaway
• Stitcher’s favorite!
• This water-soluble topping has a
textured finish for ease of
handling and will not stick to the
embroidery foot
• Excess tears away easily; remove
remnants by dabbing with water
• Use on top of item during
embroidery to keep stitches from
sinking into the nap of the fabric
StitcH2O
Country of Origin: U
K
Product Usage Instructions
• Cut a piece of StitcH2O Topping at least 2” larger than your design.• Place StitcH2O Topping on top of the fabric, centered over the
design area.• To hold StitcH2O in place temporarily: - Use Expert Embroidery Tape at the four corners to hold StitcH2O in place. OR - Lightly moisten the four corners of the StitcH2O and stick to the
background fabric. OR - Stitch in place with a basting stitch using the machine’s basting
function.
REMOVAL INSTRUCTIONS:• Remove the embroidery from the hoop.• Gently tear or trim away excess StitcH2O topping while supporting
the stitches between the thumb and finger. Most of the StitcH2O topping should tear away.
• Rinse away any remaining residue with warm wet cloth.
www.OESD.com
StitcH2OWashAway Topping