engineeringstevenengineering.com/tech_support/pdfs/33newp.pdf · engineering engineering dimensions...

ENGINEERING

Main Menu

ENGINEERING

(1 Hour/Div)1 Day

1 Week1 Month1 Year

1 Hour

Wed Jan 01 12:00:00 PDT 2006

0

10.0/Div

100

0

10.0/Div

100

Difference: T1 - T2 28.1C

Tue Jan 18 11:00:00 PDT 2006

http://128.100.101.254

Temperature: T1 59.7 F31.6T2

1 Month

1 Minute

1 Day

1

You can chart temperature from one thermocouple, twothermocouples, and/or the differential between the two.The iTCX transmitters can take Thermocouple Types J, K, T, E, R, S, B, C, N, and L measuring temperatures upto 1,820°C (3,308°F). The iTCX can display and chartabsolute measurements in two locations and a differentialmeasurement between the two locations. Award-winning TechnologyThe NEWPORT iTCX is simple to install and use, andfeatures NEWPORT's award-winning iServer technologythat requires no special software except a Web Browser.The iTCX connects to an Ethernet Network with a standardRJ45 connector and sends data in standard TCP/IPpackets. It is easily configured with a simple menu using aWeb Browser and can be password protected. From within an Ethernet LAN or over the Internet, the usersimply types its IP address or an easy to remember namein any Web Browser, and the iTCX serves a Web Pagewith the current readings. Email Alarms The NEWPORT iTCX can send an email or text messagereporting the status or an alarm condition over the Internetto any individual or distribution list.NEWPORT iServer products are designed andmanufactured in Santa Ana, California.

ThermocoupleVirtual Chart Recorder

FCC-B

iTCX-W modelsinclude two

thermocoupleconnectors!

View Temperature from one or twoThermocouples with a Web BrowserThe NEWPORT® iTCX transmitter let's you monitorTemperature from two independent Thermocouple channelsover an Ethernet network or the Internet with no specialsoftware except a Web Browser. The NEWPORT iTCX serves Active Web Pages to displayreal time readings, temperature charts, or log data instandard data formats for use in a spreadsheet or dataacquisition program such as Excel or Visual Basic. The virtual chart viewed on the web page is a JAVA™Applet that plots a chart over the LAN or Internet in realtime. With the NEWPORT iTCX, there is no need to investtime and money learning a proprietary software program tolog or chart the data.The NEWPORT iTCX is available in an industrial DIN railpackage (iTCX-D) that is powered by 10-32 Vdc, and in abenchtop or wall mount package (iTCX-W) with an includeduniversal (100-240 Vac) power adapter.Adjustable Charts Chart scales are fully adjustable on the fly. For example, thechart can display one minute, one hour, one day, one week,one month or one year. Temperature can be charted acrossthe full span, or within any narrow range such as 20-30°C.

Virtual Chart Recorder

Two Thermocouple Channels

Web Server Ten Popular

Thermocouple Types Accurate Email Alarms Data Logging No Special

Software Required

$295iTCX-W

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Accessories PriceiDRN-PS-1000 DIN Rail Power Supply (switching), 95 to 240 Vac input, 24 Vdc out @ 850 mA (power up to 7 units) 150

2

Mechanical Specifications

SpecificationsThermocouple InputTemperature Range:refer to Thermocouple ChartTemperature Accuracy:refer to Thermocouple Chart Resolution: 1°/0.1°Temperature Stability: 0.08°C/°C Thermocouple Cold End Tracking:0.05°C/°CThermocouple Lead Resistance:100 ohm max.Thermocouple Type (ITS 90):J, K, T, E, R, S, B, C, N, LiServer SpecificationsInterfacesEthernet: 10Base-T (RJ45) Supported ProtocolsTCP/IP, UDP/IP, ARP, ICMP, DHCP,DNS, HTTP, and TelnetMemory512 Kbytes Flash, 16 Kbytes SRAM

Input Type Range AccuracyIron - Constantan -210 to 760°C / -346 to 1400°F 0.4°C / 0.7°F

-270 to -160°C / -160 to 1372°C 1.0°C / 0.4°CCHROMEGA®- ALOMEGA®

-454 to -256°F / -256 to 2502°F 1.8°F / 0.7°F-270 to -190°C / -190 to 400°C 1.0°C / 0.4°C

Copper - Constantan -454 to -310°F / -310 to 752°F 1.8°F / 0.7°F-270 to -220°C / -220 to 1000°C 1.0°C / 0.4°C

CHROMEGA®- Constantan -454 to -364°F / -364 to 1832°F 1.8°F / 0.7°F-50 to 40°C / 40 to 1768°C 1.0°C / 0.5°C

Pt / 13%Rh-Pt -58 to 104°F / 104 to 3214°F 1.8°F / 0.9°F-50 to 100°C / 100 to 1768°C 1.0°C / 0.5°C

Pt / 10%Rh-Pt -58 to 212°F / 212 to 3214°F 1.8°F / 0.9°F100 to 640°C / 640 to 1820°C 1.0°C / 0.5°C

30%Rh-Pt / 6%Rh-Pt 212 to 1184°F / 1184 to 3308°F 1.8°F / 0.9°F5%Re-W / 26%Re-W 0 to 2320°C / 32 to 4208°F 0.4°C / 0.7°F

-250 to -100°C / -100 to 1300°C 1.0°C / 0.4°CNicrosil - Nisil -418 to -148°F / -148 to 2372°F 1.8°F / 0.7°F

J DIN -200 to 900°C / -328 to 1652°F 0.4°C / 0.7°FL

iTCX-D

Indicators (LED's)Network Activity, Network Link,Transmit and Receive/DiagnosticsManagementDevice configuration and monitoringthrough embedded WEB server.SoftwareFirmware upgradeable. Including anExcel program for automatic datalogging within definable timeintervals, compatible with allWindows operating systems.

Embedded WEB ServerServes WEB pages containing real-time data and live updatedcharts within definable time intervals.EnvironmentalOperating Temperature:0 to 70°C (32 to 158°F)Storage Temperature:-40 to 125°C (-40 to 257°F)

PowerInput: 9 - 12 Vdc iTCX-W10 - 32 Vdc iTCX-DSafety Qualified ac poweradapter: Nominal Output:9 Vdc @ 0.5A included for iTCX-W.Input: 100 - 240 Vac, 50/60HzSwitching Power Supply soldseparately for iTCX-DConsumption: 2.5 W max.PackagingMaterial: Metal case with flangemount for iTCX-WPolycarbonate case with DIN Railmount for iTCX-D

Temperature 1

Temperature 2

Differential 28.13

31.61

59.74

Engineering

Engineering

Dimensionsshown in

inches (mm)THERMOCOUPLE

1 2

DIAGNOSTICS

4.41

[112

.0]

Update

Main Menu

Click on Device No. on left to modify device parameters.

Title

Remote Access (Tunneling)

Terminal Server

CONFIGURATION

Secured Applet

TCP/UDP Server Type Forward CR 020000disableContinuousTCP No. of Connections Port

Remote IP Address 0.0.0.0 Remote Port 02000 Remote Access disable

No. Device Name TC Type Display Units Sampling Rate Remote Format Remote EndChar (HEX) Offset

1 Temperature 1 K F 15 TA000.0F 0D 0.0

1 Temperature 2 J C 15 TB000.0F 0D 0.0

CONFIGURATION

http://128.100.101.254

iTCX-W

Model No. Description PriceiTCX-W iServer MicroServer™ for dual thermocouple input, includes 2 type K thermocouple with 36” [1m] of 24 AWG

Teflon insulated wire and a molded mini-connector with snap-on strain relief and universal (100 - 240 Vac)power adapter 295

iTCX-D DIN Rail iServer Industrial MicroServer™ for dual thermocouple input. 295


The NEWPORT® iSE environmental monitor providesWeb-based remote surveillance of environmentalconditions in critical HVAC applications such ascomputer server rooms, clean rooms, laboratories,museums, warehouses, or any remote facility.View and record Temperature, Relative Humidity andDew Point over an Ethernet network or the Internetwith no special software—just a Web browser. EMAIL ALARMSThe device can trigger an alarm if temperature orhumidity goes above or below a set point that youdetermine. Your alarm can be sent by email to asingle user or to a group distribution list, including textmessages to Internet enabled cell phones and PDA’s.PHYSICAL THREATSThe NEWPORT iSE includes screw terminals for twocontact closures that work with common alarmsensors. You can instruct the iSE monitor to send analarm if a door is opened, a window is broken, or a firesprinkler goes off.

Environmental Surveillance over the Internet

Email Alarms Virtual Chart Recorder Web Server Accurate Readings Data Logging No Special Software

Required

POWER FAILURE The iSE monitor can triggeran alarm if the AC powerfails. The iSE monitor willcontinue to collect data forten days powered by astandard 9 Volt alkalinebattery (included). The data isstored in nonvolatile flashmemory and can later bedownloaded over theEthernet.

Web-based Remote Surveillance of Temperature + Humidity and Security

NEWPORT instrumentsare designed and

manufactured in the U.S.A.

TM

$495

Also available: the iSE-TC environmentalmonitor with two independant thermocouplechannels provides Web-based remotesurveillance of temperature conditions inany remote facility.

1


LOCAL ALARMSThe NEWPORT iSE monitor includestwo 1.5 Amp output relays that arecontrolled by the alarm conditions youselect. The relays can trigger flashinglights and a siren for example to alertpersonnel near the scene.

With the easy Web-based setup page,the two relays can be programmed forany combination of temperature orhumidity, and high or low set points,as well as alarm conditions triggeredby contact closures. The relays canalso be programmed to turn off whenconditions return to normal, orprogrammed to remain latched andrequire a manual reset.

VIEW CHARTS AND GRAPHS ONTHE WEBThe NEWPORT iSE serves ActiveWeb Pages to display real timereadings, display charts of temperatureand humidity, or log data in standarddata formats for use in a spreadsheetor data acquisition program such asExcel or Visual Basic.

The virtual chart viewed on the webpage is a JAVA™ Applet that recordsa chart over the LAN or Internet inreal time. With the NEWPORT iSE,there is no need to invest time andmoney learning a proprietary softwareprogram to log or chart the data.

Chart scales are fully adjustable on thefly. For example, the chart can displayone minute, one hour, one day, oneweek, one month or one year.Temperature and humidity can becharted across the full span (-40 to124°C, and 0 to 100% RH) or withinany narrow range such as (20 to 30°C).

LINK TO WEB CAM OR IP CAMERAThe Web page includes a link to a“Web Cam” or “IP camera” (notincluded). If you get a messageabout an alarm condition, you canquickly click on the link to view theactual scene over the Internet.

FLASH MEMORYThe NEWPORT iSE records data ona removable 2-MByte Flash Memorycard (included) that can store one fullyear of readings taken at one-minuteintervals (or two months of readings

taken at ten second intervals).Up to four years of temperature +humidity readings can be stored onthe optional 8 MByte card. Even if theEthernet network fails, data willcontinuously record on the built-innonvolatile flash memory.

The iSE monitors come complete witha plug-in temperature and humidityprobe that mounts on the instrumentor separately with the six footextension cable (included).

The temperature/ humidity sensorsare interchangeable and do notrequire routine calibration. And if areplacement sensor is ever needed,the instrument does not requirecalibration.

Installation and operation of theNEWPORT iSE monitor requires nospecial training, tools, or software.The device connects to any Ethernetnetwork with standard cable andplugs and is powered by any ACoutlet supplying 110-230 VAC.

AWARD-WINNING TECHNOLOGYThe NEWPORT iSE is simple toinstall and use, and featuresNEWPORT's award-winning iServertechnology that requires no specialsoftware except a Web Browser.

The iSE connects to an EthernetNetwork with a standard RJ45connector and sends data in standardTCP/IP packets. It is easily configuredwith a simple menu using a WebBrowser and can be passwordprotected. From within an EthernetLAN or over the Internet, the usersimply types its IP address or an easyto remember name such as"Cleanroom 5" or "Midwest ServerRoom" in any Web Browser, and theiSE serves a Web Page with thecurrent readings.

TYPICAL APPLICATIONSThe NEWPORT iSE is great formonitoring temperature + humidity inapplications such as: clean rooms,computer rooms, HVAC systems,pharmaceutical and food processingand storage, hospitals, laboratories,semiconductor fabs, electronicassembly, warehousing, museums,manufacturing, greenhouses, farmanimal shelters, and many more.

NEWPORT iServer products aredesigned and manufactured in Santa Ana, California.

2


Industrial Probe Dimensions:Ø16 x 137mm lg (Ø 0.63” x 5”lg); Cable: 6.1m (20’) long, operating temp:0 to 105°C (32 to 221°F)

Common SpecificationsInterfaces Ethernet: 10Base-T (RJ45) Supported Protocols TCP/IP, UDP/IP,ARP, ICMP, DHCP, DNS, HTTP, andTelnetIndicators (LED's) Network Activity,Network Link, Transmit andReceive/DiagnosticsLCD Display 32 Digits 4.8 x 9.7mm(0.19 x 0.38”)Relay Outputs Two Relays 1.5A @ 30VdcAlarm I/Os Two Contact Inputs, OneOpen Collector Output 150mA @ 30Vdc

Specifications iSE-THRelative Humidity SensorAccuracy/Range: ±2% for 10 to 90%±3% for 0 to 10% and 90 to 100%Non-linearity: ±3%Hysteresis: ±1%RHResponse Time: 4 seconds (63% slowly moving air)Repeatability: ±0.1%Resolution: 0.03%, 12 bitTemperature SensorAccuracy/Range*:Standard Probe: ±0.5°C ( ±1°F)for 0° to 70°C (32° to 158°F)Industrial Probe: ±0.5°C ( ±1°F)for 0 to 80°C (32 to 176°F). ±1°C (±2°F) for -40 to 0°C and 80 to124°C (-40 to 32°F and 176 to 254°F)*Note: extended temperature range is forindustrial probe only, the iServer’s operatingtemperature is 0-60°C.Response Time: 5 seconds (63% slowly moving air)Repeatability: ±0.1°CResolution: 0.01°C, 14bitProbeHousing material: SS 316Standard Probe Dimensions:Ø13 x 83.8mm lg (Ø 0.5” x 3.3”lg)

3

Memory 512 Kbytes Flash, 16 KbytesSRAMMemory Data Flash Card 2 M bytes: 2months of data storage at 10 secondlogging intervals or 1 year at 1 minuteintervalsManagement Device configuration andmonitoring through embedded WEBserver.Software Firmware upgradeable.Including an Excel program forautomatic data logging within definabletime intervals, compatible with allWindows operating systems.Embedded WEB Server Serves WEBpages containing real-time data and liveupdated charts within definable timeintervals.Power Input: 9-12 VdcSafety Qualified ac power adapter:Input: 100-240Vac, 50/60HzNominal Output: 9 Vdc @ 0.5A, incldConsumption: 2.5 W max.Battery: 9Vdc, Alkaline, includedEnvironmentalOperating Temperature:0 to 60°C (32 to 140°F)Material: SS 304 case w/ wall mountbracket.

Model No. Description PriceiSE-TH iSE monitor for temperature + humidity. The iSE-TH includes a LCD display, 2 Mbytes flash memory $495

card, 2 relay alarms, battery back-up, and universal (100-240 Vac) power adapter.

* Standard attached probe and 6ft (1.8m) extension cable (no entry required) N/C-5 Substitute Industrial 5” (127mm) Probe, 20ft (6m) cable with mini DIN connector for standard probe. 25

AccessoriesCAL-3-HU NIST traceable calibration certificate. Three humidity points: 25%, 50%, 75%. Temp 25°C. (for new iSE-TH) 125CT485B-CAL-KIT Calibration kit, 33% and 75% RH standards (for iSE-TH) 75IP-PC Polyethylene probe cap, for wet environments (for Industrial Probe only) N/CIP-SC Porous stainless steel probe cap, 5um porosity, for dusty and pressurized (<35 psi) environments 25

(for Industrial Probe only)

iSE-TH-MC2 Memory data flash card, 2 Mbyte / 1 year @ 1 minute intervals. 10iSE-TH-MC4 Memory data flash card, 4 Mbyte / 2 years @ 1 minute intervals. 20iSE-TH-MC8 Memory data flash card, 8 Mbyte / 4 years @ 1 minute intervals. 30UNIV-AC-100/240 Replacement universal ac power adapter 25

3.25

[82.

6]

2.55

[64.

8]

3.47

[88.

1]

1.31[33.3]

0.10[2.54]

1.00 [25.4] 5.13 [130.2]

DIAGNOSTICS

NETWORK LINKACTIVITY

C/ F TIME BKLT

TEMPERATURE/HUMIDITY

iP-SC Porous StainlessSteel Cap Option

iP-PC Polyethylene CapOption

Optional Caps for Industrial Probes

-5

MechanicalAll dimensions are in incheswith millimeters in [].


The NEWPORT® iSE-TC provides Web-basedtemperature monitoring in critical equipment andlocations such as computer server rooms, cleanrooms, laboratories, museums, warehouses, or anyremote facility.View and record temperature on two independentthermocouple channels, over an Ethernet network orthe Internet with no special software—just a Webbrowser.EMAIL ALARMSThe device can trigger an alarm if temperature goesabove or below a set point that you determine. Youralarm can be sent by email to a single user or to agroup distribution list, including text messages toInternet enabled cell phones and PDA’s.PHYSICAL THREATSThe NEWPORT iSE-TC includes screw terminals fortwo contact closures that work with common alarmsensors. You can instruct the iSE-TC monitor to sendan alarm if a door is opened, a window is broken, or afire sprinkler goes off.

Monitor Temperature over the Internet

Dual Thermocouple 10 Thermocouple Types Virtual Chart Recorder Email Alarms Two Relay Alarms Flash Memory Card Web Server No Special Software Required

POWER FAILURE The iSE-TC monitor can trigger an alarm if the ACpower fails. The iSE-TC will continue to collect data forten days powered by a standard 9 Volt alkaline battery(included). The data is stored in nonvolatile flashmemory and can later be downloaded over theEthernet. LOCAL ALARMSThe NEWPORT iSE-TC monitor includes two 1.5 Ampoutput relays that are controlled by the alarmconditions you select. The relays can trigger flashinglights and a siren for example to alert personnel nearthe scene. With the easy Web-based setup page, the two relayscan be programmed for two temperature inputs, andhigh or low set points, as well as alarm conditionstriggered by contact closures. The relays can also beprogrammed to turn off when conditions return tonormal, or programmed to remain latched and requirea manual reset.

1

$495iSE-TC

Two Type KThermocouples

included


VIEW CHARTS AND GRAPHSON THE WEBThe NEWPORT iSE-TC servesActive Web Pages to display realtime readings, display charts oftemperature, or log data instandard data formats for use in aspreadsheet or data acquisitionprogram such as Excel or VisualBasic.

The virtual chart viewed on theweb page is a JAVA™ Applet thatrecords a chart over the LAN orInternet in real time. With theNEWPORT iSE-TC, there is noneed to invest time and moneylearning a proprietary softwareprogram to log or chart the data.Chart scales are fully adjustable onthe fly. For example, the chart candisplay one minute, one hour, oneday, one week, one month or oneyear. Temperature can be chartedacross the full span or within anynarrow range.

The iSE-TC can display and chartabsolute measurements in twolocations and a differentialmeasurement between the twolocations. The iSE-TC can takethermocouple types J, K, T, E, R,S, B, C, N, and L measuringtemperatures up to 1,820°C(3,308°F). The iSE-TC includes apair of type K thermocouples.

Engineering

Main Menu

BothBothCh 1Ch 2

http://192.168.1.200

Read Sensor

Temperature 1 76.37 FTemperature 2 39.66 %Differential 36.71 F

Input Contact 1 ActiveInput Contact 2 NormalOutput Signal Active High

LINK TO WEB CAM OR IPCAMERAThe Web page includes a link to a“Web Cam” or “IP camera” (notincluded).

If you get a message about analarm condition, you can quicklyclick on the link to view the actualscene over the Internet.FLASH MEMORYThe NEWPORT iSE-TC recordsdata on a removable 2-MByteFlash Memory card (included) thatcan store one full year of readingstaken at one-minute intervals (ortwo months of readings taken atten second intervals).

Up to four years of temperaturereadings can be stored on theoptional 8 MByte card. Even if theEthernet network fails, data willcontinuously record on the built-innonvolatile flash memory.Installation and operation of theNEWPORT iSE-TC monitorrequires no special training, tools,or software. The device connectsto any Ethernet network withstandard cable and plugs and ispowered by any AC outletsupplying 110-230 VAC.

AWARD-WINNINGTECHNOLOGYThe NEWPORT iSE-TC is simpleto install and use, and featuresNEWPORT's award-winningiServer technology that requiresno special software except a WebBrowser.

The iSE-TC connects to anEthernet Network with a standardRJ45 connector and sends data instandard TCP/IP packets. It iseasily configured with a simplemenu using a Web Browser andcan be password protected. Fromwithin an Ethernet LAN or over theInternet, the user simply types itsIP address or an easy toremember name such as"Cleanroom 5" or "Midwest ServerRoom" in any Web Browser, andthe iSE-TC serves a Web Pagewith the current readings. TYPICAL APPLICATIONSThe NEWPORT iSE-TC is greatfor monitoring temperature inapplications such as: clean rooms,computer rooms, HVAC systems,pharmaceutical and foodprocessing and storage, hospitals,laboratories, semiconductor fabs,electronic assembly, warehousing,museums, manufacturing, farmanimal shelters, greenhouses, andmany more. NEWPORT iServer products aredesigned and manufactured in Santa Ana, California.

2


EnvironmentalOperating Temperature: 0 to 60°C (32 to 140°F)Material: SS 304 case w/ wall mount bracket.Weight: 444.5g (0.98 lbs.)

SpecificationsSensor Thermocouple InputTemperature Range: refer to Thermocouple ChartTemperature Accuracy: refer to Thermocouple Chart Resolution: 1°/0.1°Temperature Stability: 0.08°C/°C Thermocouple Cold End Tracking:0.05°C/°CThermocouple Lead Resistance:100 ohm max.Thermocouple Type (ITS 90):J, K, T, E, R, S, B, C, N, L

InterfacesEthernet 10Base-T (RJ45) Supported ProtocolsTCP/IP, UDP/IP, ARP, ICMP, DHCP,DNS, HTTP, and TelnetIndicators (LED's) Network Activity,Network Link, Transmit and DiagnosticsLCD Display 32 Digits 4.8 x 9.7mm (0.19 x 0.38”)Relay Outputs Two Relays 1.5A @ 30VdcAlarm I/Os Two Contact Inputs, OneOpen Collector Output 150mA @ 30VdcMemory512 Kbytes Flash, 16 Kbytes SRAMMemory Data Flash Card2 M bytes: 2 months of data storage at10 second logging intervals or 1 year at1 minute intervalsManagementDevice configuration and monitoringthrough embedded WEB server.Embedded WEB ServerServes WEB pages containing real-timedata and live updated charts withindefinable time intervals.Software Firmware upgradeable.Including an Excel program forautomatic data logging within definabletime intervals, compatible with allWindows operating systems.PowerInput: 9-12 VdcSafety Qualified ac power adapter:Input: 100-240Vac, 50/60HzNominal Output: 9 Vdc @ 0.5A, incldConsumption: 2.5 W max.Battery: 9Vdc, Alkaline, included

3

Model No. Description PriceiSE-TC iSE monitor for dual thermocouple input, includes an LCD display, 2 Mbytes memory data flash card, $495

2 relay alarms, battery back-up, universal (100-240 Vac) power adapter and 2 Type K thermocouples.

AccessoriesCAL-3* NIST traceable calibration certificate. Three temperature points for each input (for new iSE-TC)

For * insert: J, K, T, E, B, R, S, C, N, or L 100iSE-TH-MC2 Memory data flash card, 2 Mbyte / 1 year @ 1 minute intervals. 10iSE-TH-MC4 Memory data flash card, 4 Mbyte / 2 years @ 1 minute intervals. 20iSE-TH-MC8 Memory data flash card, 8 Mbyte / 4 years @ 1 minute intervals. 30UNIV-AC-100/240 Replacement universal ac power adapter 25

Input Type Range AccuracyIron - Constantan -210 to 760°C / -346 to 1400°F 0.4°C / 0.7°F

-270 to -160°C / -160 to 1372°C 1.0°C / 0.4°CCHROMEGA®- ALOMEGA®


Copper - Constantan -454 to -310°F / -310 to 752°F 1.8°F / 0.7°F-270 to -220°C / -220 to 1000°C 1.0°C / 0.4°C

CHROMEGA®- Constantan -454 to -364°F / -364 to 1832°F 1.8°F / 0.7°F-50 to 40°C / 40 to 1768°C 1.0°C / 0.5°C




-250 to -100°C / -100 to 1300°C 1.0°C / 0.4°CNicrosil - Nisil -418 to -148°F / -148 to 2372°F 1.8°F / 0.7°F

J DIN -200 to 900°C / -328 to 1652°F 0.4°C / 0.7°FL

Thermocouple Chart

Mechanical All dimensions are in inches withmillimeters in [ ].

Ordering Example: For a NIST traceable calibrated iSE-TC, include the type of thermocouple you want the unit calibrated for:iSE-TC monitor for dual thermocouple input and CAL-3J calibration certificate, $495 + 100 = $595.


SHOP ONLINE AT

1SM To download information and to order online, visit omega.com/wireless

Thermocouple-to-Wireless Connector/ConverterThe Smart ConnectorTM

PATENTEDCovered by U.S. and

International patents andpending applications

User Configurable For Type J, K, T, E, R, S, B,C, and N Thermocouple Input

Free Software Converts Your PC Into a Multi-Channel Chart Recorder or Data Logger

Built-In Cold Junction Compensation andLinearization

Patented Design Accepts Both Miniature andStandard Size Probes and Connectors

One Receiver Works with Multiple WirelessRemote Connectors

Low Power Operation and Sleep Mode ForLong Battery Life

Each Wireless Connector TransmitsThermocouple Temperature, AmbientTemperature, Signal Strength and BatteryStatus in Real Time

Interfaces with Model UWTC-REC1 For Multi-Channel PC Chart Recording and DataLogging or Model UWTC-REC2 (SingleChannel Industrial Transceiver with AnalogOutput and Alarm)

Works with Every Omega UWTC SeriesReceiver, WiSeries Meter/Controller/Scannerand DIN Rail Receiver

UWTC SeriesStarts at

$125

BumperBand®

T/Cinput.

Wirelessconnector.

Omega’s new Wireless Smart ThermocoupleConnector Series features stand-alone, compact,battery powered thermocouple connectors thattransmit their readings back to a host receiver up to 90 m (300') away. Each unit can be programmed inthe field to work as a Type J, K, T, E, R, S, B, C or Ncalibration connector. When activated the connectorwill transmit readings continuously at pre set timeinterval that was programmed by the user during theinitial setup. Each unit measures and transmits:Thermocouple Input Reading, Connector AmbientTemperature, RF Signal Strength and BatteryCondition to the host and is displayed on the PCscreen in real time using the provided software. Whenused with host receiver model UWTC-REC1 data fromup to 12 wireless thermocouple connectors can bereceived and displayed. Each unit includes freesoftware that converts your PC into a strip chartrecorder or data logger so readings can be saved and later printed or exported to a spread sheet file. When used with host Transceiver model UWTC-REC2wireless data from one connector can be re-transmitted out of the receiver by a wired connectionas a analog voltage, current or thermocouple signal to interface with a controller, PLC or data acquisition board.

Plug your probe into asmart connector to make a smart sensor!Four receivers

available,

see pages

7 and 8

Models, replacementbatteries and accessorieslisted on page 9

Engineers’

Choice Award

Winner!


2 Wireless product line continues to expand, visit omega.com/wireless for new details!

HOTLINETO WIRELESS

PRODUCTS

SpecificationsThermocouple (TC) InputSoftware Selectable: J, K, T, E, R, S,B, C or NThermocouple Measurement Range:

J: -210 to 760°C (-346 to 1400°F)K: -270 to 1370°C (-454 to 2498°F)T: -270 to 400°C (-454 to 752°F)E: -270 to 980°C (-454 to 1796°F)R: -50 to 1760°C (-58 to 3200°F)S: -50 to 1760°C (-58 to 3200°F)B: 500 to 1820°C (-932 to 3308°F)C: -18 to 2310°C (-0.4 to 4190°F)N: -270 to 1300°C (-454 to 2372°F)

TC Measurement Accuracy:Type J, K, T, E, N: ±0.5°C (1°F) of readingType R, S, B, C: ±2.0°C (3.6°F) of reading

TC Measurement Resolution:Type J, K, T, E, N: 0.1°CType R, S, B, C: 0.5°C

Cold Junction Compensation(Automatic): -10 to 70°C (14 to 158°F)Thermocouple Connection: Patenteduniversal female accepts both standardmale (OSTW Series) or miniature male(SMPW Series) mating connectorOperating Environment: -10 to 70°C(14 to 158°F)Computer Interface: USB (oneinterface cable included with receiver)Transmit Sample Rate: Programmablefrom 1 sample/minute to 1 sample/every5 seconds

RF Data Packet Standard:IEEE 802.15.4, open communicationarchitectureSoftware (Included Free): RequiresWindows 98, ME, 2000, XP or Vistaoperating systemConnector Internal Battery: One 3.6 Vlithium, 2.4 Ah capacity (AA) (included)Battery Life (Typical): (1 year) 1 sample/minute reading rate @ 25°C(77°F)Data Transmitted to Host:Thermocouple Reading, ConnectorAmbient Reading, RF Transmit Strengthand Battery ConditionDimensions: 100 L x 50 W x 25 mm H(without antenna) (4 x 2 x 1")Weight:

UWTC-1, UWTC-2: 70 gramsUWTC-REC1, UWTC-REC2, UWTC-REC2-D: 206 grams

Case:UWTC-1, UWTC-2: ABS plasticUWTC-REC1, UWTC-REC2, UWTC-REC2-D: Painted steel

Radio Frequency (RF) TransceiverCarrier: ISM 2.4 GHz, direct sequencespread spectrum, license free worldwide(2.450 to 2.490 GHz -12 channels)RF Output Power:

UWTC-1: 0dBm (1 mW)UWTC-2: 2dBm (10 mW)

Range of RF Link:UWTC-1: Up to 60 m (200') outdoorline of sight. Up to 20 m (65')indoor/urban.UWTC-2: Up to 120 m (400') outdoorline of sight. Up to 45 m (130')indoor/urban.

Universal Connector.Shown larger than

actual size.

SMPW-K-M, miniatureconnector, $1.75, shownlarger than actual size.Order SMPW-(*)-M, $1.75 atomega.com. * Insert K, J, T, E, R, S or B

OSTW-K-M, standard connector,$2.25, shown larger than actualsize. Order OSTW-(*)-M, $2.25 atomega.com. * Insert K, J, T, E, R, S or B

Free ThermocoupleIncluded!

Each Connector Includes One 3.6 V Lithium Battery Programming Software Measurement and

Logging Software Mounting Bracket User Manual Type K Thermocouple

The UWTC’s patented design accepts both miniature and standardconnectors or probes.

Each connector includes a free 1 m (40") Type K insulated beaded wire thermocouple with subminiature connector and wire spool caddy. Order a Spare! Model No. SC-GG-K-30-36, $15 (subminiature connector).Model No. LSC-GG-K-24-36, $15 (standard connector).


SHOP ONLINE AT


SpecificationsAvailable Types: 100 Ω (standard), 500 Ω, 1000 Ω (special Order)RTD Measurement Range:

0.00385: -200 to 600°C(-328 to 1112°F)0.00392: -100 to 457°C(-148 to 854°F)

RTD Measurement Accuracy: ±1°Cfrom 0 to 400°C (32 to 752°F), ±2.5°Cbelow 0°C or above 400°C (752°F) RTD Measurement Resolution:1°C/1°FOperating Environment: -10 to 70°C(14 to 158°F)RTD Connection: Series “T”receptacle. Use Model TA4F matingconnector (one included)Computer Interface: USB (oneinterface cable included with receiver)Transmit Sample Rate: Programmablefrom 1 sample/minute to 1 sample/every5 seconds Radio Frequency (RF) TransceiverCarrier: ISM 2.4 GHz, direct sequencespread spectrum, license free worldwide(2.450 to 2.490 GHz -12 channels)RF Output Power:

UWRTD-1: 0dBm (1 mW)UWRTD-2: 2dBm (10 mW)

Range of RF Link:UWRTD-1: Up to 60 m (200') outdoorline of sight. Up to 20 m (65') indoor/urban.UWRTD-2: Up to 120 m (400') outdoorline of sight. Up to 40 m (130') indoor/urban. RF Data Packet Standard: IEEE 802.15.4, open communication architecture

Software (Included Free): RequiresWindows 98, ME, 2000, XP or Vistaoperating system

Connector Internal Battery:One 3.6V lithium, 2.4 Ah capacity (AA) (included)Battery Life (Typical): (1 year) 1 sample/minute reading rate @ 25°C (77°F)Data Transmitted to Host: RTDreading, connector ambient reading, RFtransmit strengthand battery conditionDimensions: 100 L x 50 W x 25 mm H(without antenna) (4 x 2 x 1")

For PT100 Sensors RTD-to-Wireless Connector/ConverterThe Smart ConnectorTM

Omega’s new wireless RTDconnector Series features stand-alone, compact, battery poweredRTD connectors that transmit theirreadings back to a host receiver upto 120 m (400') away. Each unit canbe programmed in the field tointerface directly with and 3-wire100 Ω, 0.00385 or 0.00392 stylesensor. When activated theconnector will transmit readingscontinuously at pre set time intervalthat was programmed by the userduring the initial setup. Each unitmeasures and transmits: RTD inputreading, connector ambienttemperature, RF signal strength andbattery condition to the host and isdisplayed on the PC screen in realtime using the provided software.

Interfaces Directly with Any 3-Wire, 100 Ω, 0.00385 or0.00392 Curve RTD Sensor

Free Software Converts Your PC Into a Multi-Channel Chart Recorder or Data Logger

Interface up to 12 DifferentWireless Connectors With One Receiver

Low Power Operation and Sleep Mode Allows for Long Battery Life

Each Wireless Connector Transmits ProcessTemperature, AmbientTemperature, Signal Strength and Battery Status in Real Time

Works with Every OmegaUWTC Series Receiver,WiSeries Meter/Controller/Scanner and DIN Rail Receiver

UWRTD SeriesStarts at

$135

Four Receivers available! Details on pages 7 and 8.

UWRTD-2, $145, shown actual size.

TA4F matingconnector,$10, shownactual size.

Standard TB4M receptacle includesmatting connector.

Order a spare matingconnector, TA4F, $10.

Plug your probe into a

Smart Connector™ to

make a smart sensor!

Covered by U.S. andInternational patents and

pending applications

PATENTED



HOTLINETO WIRELESS

PRODUCTS

UWTC-NB9-CASS-18-U-12,$195, shown smaller than

actual size.

UWTC-NB9 and UWRTD-NB9wireless probe assemblies

are available for fast deliveryin standard 152 mm (6"),

305 mm (12"), 457 mm (18")and 610 mm (24") lengths

with probe diameters of 1.59 mm (1⁄16"), 3.18 mm (1⁄8"),4.78 mm (3⁄16") and 6.35 mm

(1⁄4"). Probes are available inInconel®, stainless steel or

Super OMEGACLAD®. See “To Order” chart

and Ordering Examples on page 9.

Available as Thermocouple or RTD Models

Free Software Converts YourPC Into a Multi-Channel ChartRecorder or Data Logger

Complete Industrial AssemblyIncludes: Probe, NB9 Headwith Built-In WirelessTransmitter Board and Long Life Battery

Works with Every OmegaUWTC Series Receiver,WiSeries Meter/Controller/Scanner and DIN RailReceiver

SpecificationsThermocouple (TC) ModelsAvailable Types: J, K, T, E, R*, S*, B*, C*or NThermocouple Measurement Range:

J: -210 to 760°C (-346 to 1400°F)K: -270 to 1370°C (-454 to 2498°F)T: -270 to 400°C (-454 to 752°F)E: -270 to 980°C (-454 to 1796°F)R: -50 to 1760°C (-58 to 3200°F)* S: -50 to 1760°C (-58 to 3200°F)* B: 500 to 1820°C (-932 to 3308°F)* C: -18 to 2310°C (-0.4 to 4190°F)* N: -270 to 1300°C (-454 to 2372°F)

TC Measurement Accuracy (NotIncluding Probe):

±1°C (1.8°F) of Reading:Type J, K, T, E and N±2.0°C (3.6°F) of Reading:Type R, S, B and C

TC Measurement Resolution:1°C/1°F: Type J, K, T, E, N, 0.5°C: Type R, S, B, C

Cold Junction Compensation(Automatic): -10 to 70°C (14 to 158°F) resistive temperaturedevice (RTD) modelsRTD Models Available Types:PT100 Ω (standard), PT500 Ω, PT1000 Ω (special order, contact factory)RTD Measurement Range:

0.00385: -200 to 600°C(-328 to 1112°F)0.00392: -100 to 457°C(-148 to 854°F)

RTD Measurement Accuracy (NotIncluding Probe): ±1°C from 0 to 400°C(32 to 752°F), ±2.5°C below 0°C orabove 400°C (752°F) RTD Measurement Resolution: 1°C/1°FOperating Environment: -10 to 70°C(14 to 158°F)Computer Interface: USB Transmit Sample Rate: Programmablefrom 1 sample/minute to 1sample/secondradio frequency (RF) transceiverCarrier: ISM 2.4 GHz, direct sequencespread spectrum, license free worldwide(2.450 to 2.490 GHz -12 channels)RF Output Power: 2dBm (10 mW)Range of RF Link: Up to 120 m (400')outdoor line of sight. Up to 40 m (130')indoor/urban.RF Data Packet Standard: IEEE802.15.4, open communicationarchitecture Software (Included Free): RequiresWindows 98, ME, 2000, XP or Vistaoperating systemConnector Internal Battery: One 3.6Vlithium, 8.5 Ah capacity (C) one includedBattery Life (Typical): 2.5 year/1 minute reading rate @ 25°C (77°F)Data Transmitted to Host: Processtemperature, ambient temperature,wireless link signal strength and battery condition

Omega’s new Wireless IndustrialThermocouple and RTD ProbeAssemblies feature complete, readyto install, pre-wired sensor andwireless transmitter package. Eachbattery powered wireless unit willtransmit measurement back to ahost receiver up to 120 m (400')away. Each unit comes pre-programmed to operate as a TypeJ, K, T, E, R*, S*, B*, C* or Nthermocouple or RTD. Whenactivated the unit will transmitreadings continuously at pre-settime intervals that has beenprogrammed by the user during theinitial setup and installation. Eachunit measures and transmits:process temperature, ambienttemperature, wireless link signalstrength and battery condition to thehost and is displayed on the PCscreen in real time using theprovided free software.

Wireless Thermocouple and RTD Industrial Probe Assemblies

UWTC-NB9 SeriesStarts at

$195

*Please consult engineering for R, S, B andC thermocouples.


SHOP ONLINE AT


Available in Thermocouple or RTD Models

NEMA-4X (IP65) WeatherResistant Enclosure

Up to 3 Years Battery Life Works with Every OMEGA®

UWTC Series Receivers Works with Every Omega

UWTC Series Receiver, WiSeries Meter/Controller/Scanner and DIN Rail Receiver

UWTC-2-NEMAStarts at

$165

Each NEMA rated unit can beprogrammed in the field to work asa type J, K, T, E, R, S, B, C or Nwireless thermocouple transmitter ora wireless RTD transmitter. Whenconnected to a sensor and activatedthe unit will transmit readingscontinuously at pre-set time intervalthat was programmed by the userduring the initial setup. Each unitmeasures and transmits: processtemperature, ambient temperature,RF signal strength and batterycondition to the host and isdisplayed on a PC screen in realtime using the provided software.Both models will interface andoperate with any Omega UWTCSeries receiver.

SpecificationsThermocouple (TC) InputAvailable Types: J, K, T, E, R, S,B, C or NThermocouple Measurement Range:

J: -210 to 760°C (-346 to 1400°F)K: -270 to 1370°C (-454 to 2498°F)T: -270 to 400°C (-454 to 752°F)E: -270 to 980°C (-454 to 1796°F)R: -50 to 1760°C (-58 to 3200°F)S: -50 to 1760°C (-58 to 3200°F)B: 500 to 1820°C (-932 to 3308°F)C: -18 to 2310°C (-0.4 to 4190°F)N: -270 to 1300°C (-454 to 2372°F)

TC Measurement Accuracy:

Type J, K, T, E, N:±1°C (1.8°F) of readingType R, S, B, C:±2.0°C (3.6°F) of reading

TC Measurement Resolution:Type J, K, T, E, N: 0.1°CType R, S, B, C: 0.5°C

Cold Junction Compensation(Automatic): -10 to 70°C (14 to 158°F)Thermocouple Connection: Internal terminal blockRTD Input Available Types: 100 Ω (standard)500 Ω, 1000 Ω (special order)RTD Measurement Range:

0.00385: -200 to 600°C(-328 to 1112°F)0.00392: -100 to 457°C(-148 to 854°F)

RTD Measurement Accuracy: ±1°Cfrom 0 to 400°C (32 to 752°F), ±2.5°Cbelow 0°C or above 400°C (752°F) RTD Measurement Resolution:1°C/1°FRTD Connection: Internal terminal block

CommonSpecifications

Operating Environment: -10 to 70°C(14 to 158°F)Computer Interface: USB Transmit Sample Rate: Programmablefrom 1 sample/minute to 1 sample/every2 seconds radio frequency (RF)transceiverCarrier: ISM 2.4 GHz, direct sequencespread spectrum, license free worldwide(2.450 to 2.490 GHz -12 channels)RF Output Power: 2dBm (10 mW)Range of RF Link: Up to 120 m (400')outdoor line of sight. Up to 40 m (130')indoor/urban.RF Data Packet Standard:IEEE 802.15.4, open communicationarchitectureSoftware (Included Free): RequiresWindows® 2000, XP or Vista operatingsystemPower: One 3.6 V, Lithium C Cell(included), replacement model: UWTC-BATT-C, $20.Battery Life (Typical): (2.5 years)1 sample/minute reading rate @ 25°CEnclosure: NEMA-4X (IP65)PolycarbonateDimensions: 80 L x 82 W x 50 mm H(3.15 x 3.22 x 1.97")

Weather Resistant WirelessThermocouple and RTD Transmitters

UWTC-2-NEMA, $165,shown smaller than,

actual size.



HOTLINETO WIRELESS

PRODUCTS

Combine One of these Wireless Receivers with Multiple Wireless Connectors orWireless Probe Assemblies to Form a Complete Wireless Measurement System!

Monitor Up to

12 Different Wireless

Thermcouple Connectors

with One Receiver!

Wireless USB Receivers

USBconnection

(cableincluded)

Available with 4 to 20 mA, 0 to 5 Vdc,0 to 10 Vdc and Type Kthermocouple output.Mating connecor and

cable included.


SHOP ONLINE AT


Free Strip Chartand Data LoggingPC Software!

Shownsmallerthanactualsize.

Shownsmallerthanactualsize.

UWTC-REC1 Standard 12-Channel Receiver, $225(USB Powered Only)With the model UWTC-REC1 datafrom up to12 wireless connectorsor wireless probe assemblies canbe received and displayed onyour PC simultaneously. Thisreceiver connects to an unusedUSB port on your computer andmust stay connected to operateand receive data.

UWTC-REC2 Standard 12-Channel Receiver with 1-Channel Analog Output andOptional Local Display, $265(USB or External DC Adaptor Powered)When powered by a USB port on your computer model UWTC-REC2 data from up to 12 wireless connectors or wireless probe assemblies can be received and displayed on your computersimultaneously. Data from one channelcan also be re-transmitted as a hardwired analog current, voltage orthermocouple signal output. Whenpowered by the DC power adaptor the unit functions as a one channeltransmitter only and provides a hardwired signal output.

Wireless Receivers withNEMA Rated EnclosuresUWTC-REC1-NEMA, $325,basic 12-channel receiver, shown.

UWTC-REC2-NEMA, $335,12-channel receiver with 1-channelanalog output.

UWTC-REC2-D-NEMA, $365,12-channel receiver with 1-channel analog output and LCD display.

UWTC-REC1

$225

UWTC-REC2-D

$265

Starts at

$325Shownsmallerthanactualsize.


Wireless product line continues to expand, visit omega.com/wireless for new details!

HOTLINETO WIRELESS

PRODUCTS

The OMEGA® UWTC-REC3receiver lets you monitor and recordtemperature over an Ethernetnetwork or the Internet without anyspecial software-just your webbrowser. The receiver is anindependent node on the networksending and receiving data instandard TCP/IP packets. It is easilyconfigured from a web browser andcan be password protected. TheUWTC-REC3 can trigger an alarm ifvariables go above or below a set-point that you can determine. Youralarm can be sent by e-mail to asingle user or to a group distributionlist, including text messages toInternet enable cell phones andPDA’s. The OMEGA “Mail Notifier”software is a free and easy-to-useprogram for this application.The UWTC-REC3 receiver servesactive web pages to display real timetemperature readings and charts.You can also log data in standarddata formats for use in a spreadsheetor data acquisition program such asExcel or Visual Basic. OMEGA offersa free, user-friendly program forlogging data to Excel.OMEGA offers an OPC Serversoftware ($295) that makes it easyto intergrate the UWTC-REC3wireless receiver with many populardata acquisition and Automationprograms.

UWTC-REC3Starts at

$235 Visit omega.com/wirelessfor the latest features andspecifications!

UWTC-REC3 $235, shownsmaller than actual size. IncludesDC power adaptor, ethernetcable and operator’s manual.

Wireless Receiver for Web-Based Monitoring of Temperature

Wireless CommunicationProtocol: IEEE 802.15.4 Frequency: 2.4 GHz, channel #12 Network Topology: Star topology Range: Up to 91 m (300') withoutobstructions or interference environment Operating Temperature: -18 to 55°C (-0.4 to 131°F), 90% RH non-condensingStorage Temperature: -40 to 125°C (-40 to 257°F)

GeneralAgency Approval: FCC, EN300328 Software: Field firmware upgradeable;including an excel program forautomatic data logging within definabletime intervals, compatible with allWindows® operating systems

Receiver Connects Directly to an Ethernet or the Internet

Does Not Require a Host Computer

Serves Active Web Pages to Display Real TimeTemperature Readings and Charts

Works with any UWTC orUWRTD Series WirelessConnectors or ProbeAssemblies

Alarm Notification can be Sentto E-mail, Including TextMessages to Internet EnabledCell Phones and PDAs

SpecificationsEthernet: 10Base-T (RJ45) Supported Protocols: TCP/IP, ARP,ICMP, DHCP, DNS, HTTP, and Telnet LED Indicators: Network Activity,Network Link, Diagnostics, Receive and Power Management: Device configuration and monitoring through embedded WEB server Embedded WEB Server: Serves WEBpages (JAVA™ Applets) containing real-time data and live updated chartswithin definable time intervals

PowerPower Input: 9 to 12 Vdc Consumption: 2.5 W maxc Safety Qualifed ac Power Adaptor (Included) Nominal Output:9 Vdc @ 0.5 A Input: 100 to 240 Vac, 50/60 Hz

8


MOST POPULAR MODELS HIGHLIGHTED!To Order (Specify Model Number)Model No. Price DescriptionUWTC-1 $125 Wireless thermocouple connector (standard distance)*UWTC-2 135 Wireless thermocouple connector (extended distance)*UWTC-2-NEMA 165 Wireless thermocouple connector (extended distance, NEMA enclosure)UWRTD-1 135 Wireless RTD connector (standard distance)UWRTD-2 145 Wireless RTD connector (extended distance)UWRTD-2-NEMA 175 Wireless RTD connector (extended distance, NEMA enclosure)UWTC-NB9-(*)-(**)U-6 195 Wireless thermocouple probe assembly (6" ungrounded probe)UWTC-NB9-(*)-(**)U-12 195 Wireless thermocouple probe assembly (12" ungrounded probe)UWTC-NB9-(*)-(**)U-18 205 Wireless thermocouple probe assembly (18" ungrounded probe)UWTC-NB9-(*)-(**)U-24 205 Wireless thermocouple probe assembly (24" ungrounded probe)UWRTD-NB9-(†)-(††)-12 195 Wireless RTD probe assembly (12" probe)UWRTD-NB9-(†)-(††)-24 205 Wireless RTD probe assembly (24" probe)UWTC-REC1 225 12-channel receiver (USB powered)UWRH-2 165 Wireless RH/temperature transmitterUWTC-REC1-NEMA 325 12-channel wireless receiver (USB powered) NEMA enclosureUWTC-REC2-(‡) 235 12-channel wireless receiver with 1 channel analog outputUWTC-REC2-D-(‡) 265 12-channel wireless receiver with 1 channel analog output and LCD displayUWTC-REC2-(‡)-NEMA 335 12-channel wireless receiver with 1 channel analog output, NEMA enclosureUWTC-REC2-D-(‡)-NEMA 365 12-channel wireless receiver with 1 channel analog output and LCD

display, NEMA enclosureUWTC-REC3 235 36-channel receiver/host with ethernetUWTC-ANT-LR 10 Optional high performance antennaUWTC-BATT 12 Replacement battery for UWTC-1, UWRTD-1UWTC-BATT-HP 20 Replacement battery for UWTC-2, UWRTD-2, UWRH-2UWTC-BATT-C 20 Replacement battery for UWTC-NB9, UWRTD-NB9, UWTC-2-NEMA,

UWRTD-2-NEMAUWTC-CABLE 5 Spare programing cable (one included with receivers)

* Comes with one 3.6V lithium battery, programming software, measurement and logging software, mounting bracket, Type K beaded wirethermocouple, and user manual.For UWTC-REC2 Models: ‡ Insert “V1” for 0 to 5 Vdc, “V2” for 0 to 10 Vdc, “TC” for Type K thermocouple, or “MA” for 4 to 20 mAFor UWTC-NB9 Models: * Insert “ICIN” for Type J with a inconel® sheath, or “ICSS” for Type J with a 304 SS sheath. Insert “CAIN” for TypeK with a inconel® sheath, or “CASS” for Type K with a 304 SS sheath. Call for Type K with OmegacladXL® sheath. Insert “CXIN” for Type Ewith a inconel® sheath, or “CXSS” for Type E with a 304 SS sheath. Insert “CPIN” for Type T with a inconel® sheath, or “CPSS” for type T witha 304 SS sheath. Insert “NNIN” for Type N with a inconel® sheath, (not available in SS). Contact engineering for price, availability and orderinginformation for R, S, B, and C thermocouples. ** For sheath diameter insert “116” for 1.59 mm (1⁄16"), “18” for 3.18 mm (1⁄8"), “316” for 4.78 mm (3⁄16"), “14” for 6.35 mm (1⁄4")For UWRTD-NB9 Models: † Insert “1PT304” for 100 Ω , 0.00385 curve with a 304 SS sheath, or “1PT316” for 100 Ω, 0.00385 curve with a316 SS sheath. Insert “2PT304” for 100 Ω, 0.00392 curve with a 304 SS sheath, or “2PT316” for 100 Ω, 0.00392 curve with a 316 SS sheath.†† For sheath diameter insert “116” for 1.59 mm (1⁄16"), “18” for 3.18 mm (1⁄8"), “316” for 4.78 mm (3⁄16"), “14” for 6.35 mm (1⁄4")Ordering Examples: UWTC-1, wireless thermocouple connector/transmitter, UWTC-REC2-MA, 12-channel transceiver/host with 1-channel 4 to 20 mA analog output and alarm, and UWTC-BATT, spare battery, $125 + 235 + 12 = $372. Two UWTC-1, wireless thermocoupleconnector/transmitters, UWTC-REC1, 12-channel receiver/host, and two UWTC-BATT spare batteries, $125 + 125 + 225 + 12 + 12 = $499.UWTC-NB9-CAIN-316U-12, wireless thermocouple probe assembly, Type K, inconel® sheath, 4.78 mm (3⁄16") sheath diameter, ungroundedjunction, 300 mm (12") long $195. UWRTD-NB9-1PT316-18-24, wireless RTD probe assembly, 100 Ω, 0.00385 curve, 316 SS sheath, 3.18mm (1⁄8") sheath diameter, 600 mm (24") long $205.

SHOP ONLINE AT


A wireless panel meter/controller/scanner and

wireless DIN rail receivers thatwork with all UWTC, UWRTDSeries wireless connectors

and wireless industrial probeassemblies are available now.

AVAILABLE NOWWireless DINrail receiver,wiDR33-U,$395, shownsmaller thanactual size.See page 19.

A wireless panelmeter/controller/scanner, wi833-U,$395, shown smallerthan actual size. See page 16.

Visit omega.com/wirelessfor the latest features andspecifications!


One Omega Drive | Stamford, CT 06907 | 1-888-TC-OMEGA (1-888-826-6342) | [email protected]

www.omega.com

More than 100,000 Products Available!

CANADAwww.omega.caLaval(Quebec)

1-800-TC-OMEGA

UNITED KINGDOMwww. omega.co.uk

Manchester, England0800-488-488

GERMANYwww.omega.de

Deckenpfronn, Germany0800-8266342

FRANCEwww.omega.fr

Guyancourt, France088-466-342

BENELUXwww.omega.nl

Amstelveen, NL0800-099-33-44

UNITED STATESwww.omega.com

1-800-TC-OMEGAStamford, CT.

CZECH REPUBLICwww.omegaeng.cz

Karviná, Czech Republic596-311-899

TemperatureCalibrators, Connectors, General Test and Measurement Instruments, Glass Bulb Thermometers, Handheld Instruments for Temperature Measurement, Ice Point References, Indicating Labels, Crayons, Cements and Lacquers, Infrared Temperature Measurement Instruments, Recorders Relative Humidity Measurement Instruments, RTD Probes, Elements and Assemblies, Temperature & Process Meters, Timers and Counters, Temperature and Process Controllers and Power Switching Devices, Thermistor Elements, Probes and Assemblies,Thermocouples Thermowells and Head and Well Assemblies, Transmitters, Wire

Pressure, Strain and ForceDisplacement Transducers, Dynamic MeasurementForce Sensors, Instrumentation for Pressure and Strain Measurements, Load Cells, Pressure Gauges, Pressure Reference Section, Pressure Switches, Pressure Transducers, Proximity Transducers, Regulators, Strain Gages, Torque Transducers, Valves

pH and ConductivityConductivity Instrumentation, Dissolved Oxygen Instrumentation, Environmental Instrumentation, pH Electrodes and Instruments, Water and Soil Analysis Instrumentation

HeatersBand Heaters, Cartridge Heaters, Circulation Heaters, Comfort Heaters, Controllers, Meters and Switching Devices, Flexible Heaters, General Test and Measurement Instruments, Heater Hook-up Wire, Heating Cable Systems, Immersion Heaters, Process Air and Duct, Heaters, Radiant Heaters, Strip Heaters, Tubular Heaters

Flow and LevelAir Velocity Indicators, Doppler Flowmeters, Level Measurement, Magnetic Flowmeters, Mass Flowmeters,Pitot Tubes, Pumps, Rotameters, Turbine and Paddle Wheel Flowmeters, Ultrasonic Flowmeters, Valves, Variable Area Flowmeters, Vortex Shedding Flowmeters

Data AcquisitionAuto-Dialers and Alarm Monitoring Systems, Communication Products and Converters, Data Acquisition and Analysis Software, Data LoggersPlug-in Cards, Signal Conditioners, USB, RS232, RS485 and Parallel Port Data Acquisition Systems, Wireless Transmitters and Receivers

click here to go to the omega.com home pageCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

http://www.omega.com

http://www.omega.com

http://www.omega.ca

http://www.omega.de

http://www.omega.co.uk

http://www.omega.fr

http://www.omegaeng.cz

http://www.omega.nl

http://www.omega.com/temperature/tsc.html

http://www.omega.com/das/dsc.html

http://www.omega.com/pressure/psc.html

http://www.omega.com/green/gsc.html

http://www.omega.com/green/gsc.html

http://www.omega.com/heaters/hsc.html

http://www.omega.com/

http://www.omega.com/

WebMaster

Text Box

EPG05

The new NEWPORT® zSeries wireless sensor system provides Web-based monitoring of Temperature,Humidity, and Barometric Pressure in critical HVAC and Refrigeration applications.The compact wireless “End Devices” mount discretely on the wall in clean rooms, laboratories, museums,

computer server rooms, warehouses, and any remote facility. Thewireless End Devices are powered by two AA 1.5 volt alkaline batteries.The End Devices transmit up to 300 feet (without obstructions orinterferences) to a “Coordinator” connected directly to an Ethernetnetwork and the Internet. The wireless system complies with IEEE802.15.4 operating at 2.4 GHz.The NEWPORT zSeries system let's you monitor and recordTemperature, Relative Humidity, and Barometric Pressure over anEthernet network or the Internet without any special software-just yourWeb Browser.NEWPORT offers a selection of End Devices for a variety ofapplications. Each End Device supports one or two sensors. The EndDevices are available with built-in sensors, with external sensor probes,and with both built-in and external sensors.The external sensors are designed for harsh environments such asoutdoor weather, in HVAC ducts, in freezers and refrigerators. Forexample, you can select one End Device that has one internal and oneexternal sensor to monitor temperature and humidity both inside andoutside a climate-controlled facility.

Wireless Sensor System

Temperature Humidity Barometric Pressure

Email Alarms Web Server No Special Software Required

$95zED-T ©COPYRIGHT 2008 NEWPORT ELECTRONICS, INC. ALL RIGHTS RESERVED.

$195zCDR


Each zSeries Coordinator can directly support up tothirty-two (32) End Devices. The Coordinatorsinclude AC adapters to operate on any voltageworldwide from 100-240 Vac and 50-60Hz. TheCoordinator connects directly to an EthernetNetwork or the Internet. Unlike an RS232 or USBdevice, it does not require a host computer.The zSeries Coordinator is an independent node onthe network sending and receiving data in standardTCP/IP packets. It is easily configured from a WebBrowser and can be password protected. Fromwithin an Ethernet LAN or over the Internet, theuser simply types the IP address (such as192.168.1.200) or an easy to remember name(such as "Warehouse 5" or "Chicago Lab") and theCoordinator serves a Web Page with the currentreadings.

The device can trigger an alarm if variables goabove or below a set point that you determine. Youralarm can be sent by email to a single user or to agroup distribution list, including text messages toInternet enabled cell phones and PDA’s. TheNEWPORT “Mail Notifier” software is a free andeasy program for this application.The NEWPORT zSeries wireless sensor system iseasy to install, simple to operate, and featuresNEWPORT's award-winning iServer technologywith an Embedded Web Server that requires nospecial software.

The NEWPORT zSeries system serves Active WebPages to display real time readings and charts oftemperature, humidity, and barometric pressure.You can also log data in standard data formats foruse in a spreadsheet or data acquisition programsuch as Excel or Visual Basic. NEWPORT offers afree and easy to use program for logging data toExcel.

The virtual chart viewed on the web page is aJAVA™ Applet that records a chart over the LAN orInternet in real time. With the NEWPORT zSeriessystem there is no need to invest time and moneylearning a proprietary software program to log orchart the data.Chart scales are fully adjustable on the fly. Forexample, the chart can display one minute, onehour, one day, one week, one month or one year.Temperature and humidity can be charted acrossthe full span (-40 to 125°C, and 0 to 100% RH) orwithin any narrow range such as (20 to 30°C).

NEWPORT offers an OPC Server software ($295)that makes it easy to integrate the zSeries wirelesssensor system with many popular Data Acquisitionand Automation programs offered by OMEGA,Wonderware, iConics, Intellution, RockwellAutomation, and National Instruments, amongothers.NEWPORT zSeries products are designed andmanufactured in Santa Ana, California.


SPECIFICATIONSSENSOR SPECIFICATIONS (zED)RELATIVE HUMIDITYAccuracy/Range: zED-BTH, zED-TH, -THP±2% for 10 to 90%; ±3% for0 to 10% and 90 to 100%Hysteresis: ±1% RHNon-linearity: ±3%Repeatability: ±0.1%Resolution: 0.1%

TEMPERATUREAccuracy/Range*:zED-T (internal sensor)±0.5ºC for 10º to 55ºC (±0.9ºF for 50º to 131ºF)±1ºC for -18º to 10ºC (±1.8ºF for -0.4º to 50ºF)-TP1, -TP2 (external sensor)±0.5ºC for 10º to 85ºC (±0.9ºF for 50º to 185ºF)±1ºC for -40º to 10ºC and 85º to 125ºC (±1.8ºF for -40º to 50ºF and 185 to 257ºF)Accuracy/Range*: zED-BTH, zED-TH (internal sensor)±0.5ºC for 0º to 45ºC (±0.9ºF for 32º to 113ºF)±1ºC for -18º to 0ºC and 45º to 55ºC (±1.8ºF for -0.4º to 32ºF and 113º to 131ºF)-THP (external sensor)±0.5ºC for 0º to 45ºC (±0.9ºF for 32º to 113ºF)±1ºC for -18º to 0ºC and 45º to 70ºC (±1.8ºF for -0.4º to 32ºF and 113º to 158ºF)±2ºC for -40º to -18ºC and 70º to 124ºC(±3.6ºF for -40º to -0.4ºF and 158º to 255ºF)Accuracy/Range*: zED-BT (internal sensor)±0.8ºC @ 20ºC (±1.5ºF @ 68ºF)±2ºC for -18º to 55ºC (±3.6ºF for -0.4º to 131ºF)-BTP (external sensor)±0.8ºC @ 20ºC (±1.5ºF @ 68ºF)±2ºC for -40º to 85ºC (±3.6ºF for -40º to 185ºF)Repeatability: ±0.1ºC for zED-BTH, zED-TH, -THPResolution: 0.1ºC*Note: extended temperature ranges are for External Probesonly, the End Device’s operating temperature is -18 to 55ºC (-0.4 to 131ºF)

BAROMETRIC PRESSUREAccuracy/Range: zED-BTH, zED-BT, -BTP±2 mbar for 10 mbar to 1100 mbar (1 KPa to 110 KPa)Resolution: 0.1 mbar

EXTERNAL PROBE SPECIFICATIONS (zED)Industrial Probe:SS 316 housing, 137mm x Ø16mm (5” x Ø 0.63”) for zED-xx-BTP, zED-xx-THPStick Probe:ABS tubing, 152.4 mm x Ø6.35 mm (6” x Ø 0.25”) for zED-xx-TP1Lug Mounted Probe:Copper tubing, 53.4 mm x Ø 7.92mm (2.1” x Ø 0.312”);mounting hole Ø 4.72mm (Ø 0.186”) for zED-xx-TP2Standard Cable: 3 m (10’) long x Ø 5.72 mm (0.225”);-40º to 125ºC (-40º to 257ºF) for -TP1, -TP2, -THP;-55º to 105ºC (-67º to 221ºF) for -BTPOptional MIL Spec Cable (-ET): Ø 2.62 mm (0.103”);-80º to 200ºC (-112º to 392ºF)

INTERFACE SPECIFICATIONS (zCDR)Ethernet: 10Base-T (RJ45)Supported Protocols:TCP/IP, ARP, ICMP, DHCP, DNS, HTTP, andTelnetLED Indicators:Network Activity, Network Link,Diagnostics, Receive andPowerManagement:Device configuration andmonitoring throughembedded WEB serverEmbedded WEB Server:Serves WEB pages (JAVA™ Applets) containing real-time data and live updated charts within definable timeintervals.

WIRELESS COMMUNICATION Standard: IEEE 802.15.4Frequency: 2.4 GHz (2400 to 2483.5MHz), DSSS, 16 channels Network Topology: Star Topology Range: Up to 91 m (300 ft) without obstructions orinterference

POWER (zED)Alkaline Battery: Two 1.5 Vdc, suppliedLifetime: Estimate of 2 years with frequency of 1 readingper 2 minutes

POWER (zCDR)Power Input: 9 to12 VdcConsumption: 2.5 W maxSafety Qualified AC Power Adapter (included)Nominal Output:9 Vdc @ 0.5 A Input: 100 to 240 Vac, 50/60 HzPower Adapter OperatingTemperature: 0º to 40ºC (32º to 104ºF)

ExternalTemperature Lug Mount

Probe

Industrial ProbeTemperature Humidity /

Barometric Pressure

Outdoors and Inside Refrigerators & Freezers

ExternalTemperatureStick Probe Safety Qualified

Universal AC Power Adapter,

included


SPECIFICATIONS (continued) PACKAGING (zED)Material: PBT (Valox) Plastic Case with Wall Mount 64.5mm W x 91.8mm L x 23.8mm D (2.54” W x 3.61” L x 0.94” D)

PACKAGING (zCDR)Material: Metal Case with Wall Mount Bracket61.6 W x 90.3 L x 23.6mm D (2.42”W x 3.56”L x 0.93”D)ENVIRONMENTALOperating Temperature: 90% RH non-condensing,-18º to 55ºC (-0.4º to 131ºF) for zED; 0º to 70ºC (32º to 158ºF) for zCDRStorage Temperature: -40º to 125ºC (-40º to 257ºF)

GENERALAgency Approval: FCC Part 15C; CE EMC2004/108/EC, LVD 2006/95/EC, RTT&E 1999/5/ECSoftware: iConnect (configuration software for theEthernet interface), iLog (Excel-based software forautomatic data logging), and Mail Notifier (email alarm notification software)

Ordering Example: for two end units with an internal temperature sensor and an external temperature sensor in a lug mountingprobe housing with 10’ cable zED-T-TP2 and a coordinator zCDR: $145 x 2 + $195 = $485. For MIL Spec Cable add suffix -ET, and add additional $2 per each foot of cable, zED-T-TP1-ET = $145 + $20 = $165, or fordifferent lengths, such as 5’ cable: zED-T-TP1-ET5 = $145 + $10 = $155. Not available for -BTP Probes.Other sensor combinations available, contact our Sales Department for more information.

To OrderModel No. Description PricezCDR Coordinator, which can support up to thirty-two (32) End Devices $195zED-T End Device Unit with Internal Temperature Sensor $95zED-T-TP1 End Device Unit with Internal Temp. Sensor and External Temp Sensor with Stick Probe $145zED-T-TP2 End Device Unit with Internal Temp. Sensor and External Temp Sensor with Lug Mount Probe $145zED-TH End Device Unit with Internal Temperature and Humidity Sensor $150zED-TH-THP End Device Unit with Internal and External Temperature and Humidity Sensor $245zED-THP End Device Unit with External Temperature and Humidity Sensor $190zED-BT End Device Unit with Internal Barometric Pressure and Temperature Sensor $150zED-BTH End Device Unit with Internal Barometric Pressure, Temperature and Humidity Sensor $195zED-BT-BTP End Device Unit with Internal Barometric Pressure and Temperature Sensor and

External Barometric Pressure and Temperature Sensor $250zED-B-THP End Device Unit with Internal Barometric Pressure Sensor and External Temperature

and Humidity Sensor $250

Accessories Description PricezTHP Replacement, External Industrial Probe with Temp. and Humidity Sensor, 3 m (10’) cable $95zTP1 Replacement, External Stick Probe with Temperature Sensor, 3 m (10’) cable $50zTP2 Replacement, External Lug Mount Probe with Temperature Sensor, 3 m (10’) cable $50zBTP Replacement, External Industrial Probe with Barometric Pressure and Temp. Sensor,

3 m (10’) cable $100Calibration

CAL-3-HU NIST Traceable Calibration Certificate. Three Humidity Points: 25%, 50%, 75%, One Temperature Point 25°C (for new units) $125

CAL-3-HU-P-T NIST Traceable Calibration Certificate. Three Humidity , Barometric Pressure, and Temperature Points (for new units) $250

CAL-3-P NIST Traceable Calibration Certificate. Three Barometric Pressure Points, and Temperature 25°C (for new units) $125

CT485B-CAL-KIT Calibration Kit, 33% and 75% RH Standards $75

The NEWPORT zSeries system let's you monitorand record Temperature, Relative Humidity, andBarometric Pressure over an Ethernet network orthe Internet without any special software-just yourWeb Browser.


Temperature Humidity Barometric

Pressure Email Alarms Web Server No Special

SoftwareRequired

$195zED-TP1-P

The rugged high-performance, high power NEWPORT® wiSeries wireless sensors featuredon this page are compatible with the NEWPORT zSeries and wiSeries system for Web-basedmonitoring of Temperature, Humidity, and Barometric Pressure.The radio is a High Power IEEE 802.15.4 compliant transmitter operating at 2.4 GHzdesigned to transmit over greater distances and through more obstructions than the standardtransmitter.These wireless sensors transmit up to 1000m (3280’)--without obstructions or interferences toa zSeries coordinator or wiSeries meter-controller. The coordinators and controllersconnect directly to an Ethernet network and the Internet and serve active Web Pages todisplay and chart the data.You can monitor and record Temperature, Relative Humidity, and Barometric Pressure overan Ethernet network or the Internet without any special software--just your Web Browser.You can even set alarms to be notified by email. Alarms can be sent to a single user or to agroup distribution list, including text messages to cell phones.These wiSeries wireless sensors are designed for demanding industrial applications indoorsand harsh outdoor environments. The electronics are protected in a rugged weatherproofpolycarbonate NEMA4 / IP65 rated housing. The rugged industrial sensors are supplied withten feet of cable.

NEWPORT offers wireless sensor/transmitters that run on either batteries or ACpower. The battery version comes with two alkaline D-Cell batteries that can lastfor years. The AC version comes with a 5 VDC universal AC adapter thatoperates on any voltage worldwide (110-240 VAC). Should AC power fail, the unitcan operate on a 3.6V ultra-long-life lithium backup battery (included). It can runon battery power for days, weeks, or months depending on the user's settings.

ExternalProbes:

Temperature,Humidity, andBarometric Pressure

To Order (Specify Model No.)Model No. Price DescriptionzED-TP1-P $195 Wireless Temperature Sensor w/ Stick Probe, ac poweredzED-TP2-P 195 Wireless Temperature Sensor w/ Lug Mount Probe, ac poweredzED-THP-P 240 Wireless Temperature and Humidity Sensor, ac poweredzED-BTP-P 245 Wireless Barometric Pressure and Temp. Sensor, ac powered

$195zCDR

$395wi8-Z

Meter-Controller /Coordinator


wiSeries Wireless DIN Rail Monitoringand Control DeviceThe new NEWPORT wi®Series DIN Rail wireless monitoringand control device is compatible with a large and growingnumber of NEWPORT wireless sensors:UWTC “Universal Wireless Thermocouple” Type J, K, T, E,R, S, B, N, & C.UWRTD “Universal Wireless RTD”.zSeries wireless End Devices with sensors for Temperature,Humidity & Barometric Pressure.The wiSeries wiDR DIN Rail Monitor & Controller can monitorup to eight (8) wireless sensors.The compact instrument connects directly to an Ethernetnetwork and the Internet and features NEWPORT’s award-winning embedded Web Server. It is easily configured andmonitored with a Web browser over the Ethernet network or

the Internet.Alternatively, the wiDR DIN Rail Monitor &Controller can instead be connected to theUSB port of a single computer with a “USBEthernet Adapter” that are inexpensive andwidely available.

wiSeries

Main Menu

CHART

(2 Seconds/Div)1 Minute1 Minute1 Day1 Week1 Month1 Year

0

5C/Div

50 1200

300

100%

0%

10%/Div

90hPa/Div

C hPa

Tue Feb 5 10:19:10 PDT 2008Tue Feb 5 10:18:10 PDT 2008

http://192.168.1.200

Min / Max Temp 48.0/21.0

P1 Process

P2 Sensor 2

P3 Process

P4 Process

P5 Process

P6 Process

P7 Process

P8 Sensor 8

A1 Ambient

A2 Sensor 2

A3 Ambient

A4 Ambient

A5 Ambient

A6 Ambient

A7 Ambient

A8 Sensor 8

Save Current Graph

UWTC

User-friendly, Simple toConfigure

Wireless Inputs:Thermocouple, RTD,Temperature + Humidity + Barometric Pressure

Embedded Ethernet(standard)

2 Alarm Outputs: SolidState Relays (SSR’s), dcPulse, MechanicalRelays, Analog Voltage & Current

Free Software

DIN Rail Monitor & Controller

zED-TH

$395wiDR



Probe


Barometric Pressure

External TemperatureStick Probe

MONITOR AND ALARM The wiDR meter-controller comes standard with achoice of either two Form C relays, or two SSR’s(solid state relays) that can be used for controlfunctions or alarms. The wiDR meter can monitoralarm conditions for any or all of the wirelesssensors. For example, the wiDR meter can be setup to trip an alarm if any one of the sensorsindicated it was above or below a pre-set alarmpoint.MONITOR & CONTROL LOCALLY AND OVERTHE INTERNETThe new NEWPORT® wiSeries wireless monitoringand control system provides local monitoring andcontrol, along with remote Web-based monitoring oftemperature from T/C’s, RTD’s, and semiconductorsensors, as well as RH, and barometric pressure. The wireless sensors transmit up to 1000m (3280’)* --without obstructions or interference, to a wiSeriesmonitor-controller connected directly to an Ethernetnetwork and the Internet. The wireless systemcomplies with IEEE 802.15.4 operating at 2.4 GHz.* Distances for UWTC-1, UWRTD-1: up to 60m (200 ft), UWTC-2, UWRTD-2: up to 120m (400 ft),zED-*-P: up to 1000m (3280 ft), all distances arewithout obstructions or interference.The NEWPORT wiSeries system let’s you monitorand record temperature, relative humidity, andbarometric pressure over an Ethernet network or theInternet without any special software--just your WebBrowser.WIRELESS SENSORSNEWPORT offers a wide and growing selection ofwireless sensors for a variety of applications.Depending on application, the wireless sensors arepowered by 2 AA batteries, a single lithium battery(approx. AA size), or an external AC Adapter thatoperates on any voltage worldwide from 100 to 240VAC.Wireless sensors are available with external probesappropriate for an almost unlimited variety ofindustrial and commercial applications.

ETHERNET The wiDR is an independent node on the networksending and receiving data in standard TCP/IPpackets. It is easily configured from a Web Browserand can be password protected. From within anEthernet LAN or over the Internet, the user simplytypes the IP address (such as 192.168.1.200) or aneasy to remember name (such as "Oven 5" or) andthe wiSeries meter serves a Web Page with thecurrent readings.

ALARM AND EMAILThe wiDR monitor-controller can trigger an alarm ifvariables go above or below a set point that youdetermine. Your alarm can be sent by email to asingle user or to a group distribution list, includingtext messages to cell phones and PDA’s. TheNEWPORT "Mail Notifier" software is a free andeasy program for this application.The wiDR monitor-controllers operate on any ACvoltage worldwide from 100 to 240 Vac and 50 to60Hz. The monitor-controller connects directly to anEthernet Network or the Internet. Unlike an RS232or USB device, it does not require a host computer.

Channel 12

Please refer to local regulations for the allowed maximum transmit power

Transmit Power

Reset

PID 13106 (version x.x)iSeries Firmware Version x.x

InputSetpoints & On/Off

Alarm 2Alarm 1

Passcode IDDisplay

Permanent Store

Enable Standby Mode Before Configuring Unit

Scrolling

Main Menu

CONTROLLER SETUPSetup

Transmit Power

Misc.

Monitor

CONTROLLER SETUP

http://192.168.1.200Address

Update

Update

Update

20dBm

End Device ID -


SPECIFICATIONS Control Output 1 & 2Relay: 250Vac or 30Vdc @ 3A (resistive load); configurable for ON/OFFOutput 1:SPDT type, can be configured as Alarm 1 output. Output 2:SPDT type, can be configured as Alarm 2 outputSSR: 20-265Vac @ 0.05 - 0.5A (resistive load); continuousDC Pulse: Non-Isolated; 10 Vdc @ 20 mAAlarm 1 & 2 (programmable)Type: Same as Output 1 and 2Operation: High/low, above/below, band,latch/unlatch, normally open/normally closed andprocess/deviationAnalog Output (programmable): Non-Isolated,Retransmission 0 to 10Vdc or 0 to 20mA, 500Ω max(Output 1 only). Accuracy is ± 1% of FS whenfollowing conditions are satisfied. 1) Input is not scaled below 1% of Input FS. 2) Analog Out is not scaled below 3% of Output FS.Network and Communications Ethernet: Standard Compliance IEEE 802.3 10Base-T Supported Protocols: TCP/IP, ARP, HTTPGETConnection: Screw terminalsGeneralDimensions:93 H x 39 W x 125 mm D (3.64 x 1.55 x 4.93")Operating Temperature: 0 to 55°C (32 to 131°F), 90% RH non-condensingLine Voltage/Power: 90 - 240 Vac ±10%, 50 - 400Hz*, 110 - 375 Vdc, equivalent voltage * No CE compliance above 60 HzLow Voltage/Power Option: 24 Vac**, 20 - 36 Vdc. External power source mustmeet Safety Agency Approvals** Units can be powered safely with 24Vac power, but no

certification for CE are claimed

DIN Rail Monitor & Controller

Other outputs options are available, please contact our Sales Department. For Low Power Option (12-36Vdc, 24Vac) add -DC to end of part number: wiDR33-Z-DC $395 + 25 = $420.

To Order (Specify Model No.)Model No. Price DescriptionwiDR33-U $395 Wireless Meter/Controller for UWTC units with 2 Relays: Form “C” SPDT 3 A @ 120 Vac, 3 A @

240 Vac, Embedded Ethernet, 90-240 Vac/dc, 50-400 HzwiDR44-U 395 For UWTC units with Two Pulsed 10 Vdc @ 20 mA (for use with external SSR)wiDR52-U 395 For UWTC units with Analog Output selectable as retransmission of process value;

0 to 10 Vdc or 0-20 mA @ 500 ohm max. and SSRwiDR53-U 395 For UWTC units with Analog Output 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and Form “C” RelaywiDR22-Z 395 For zSeries units with Two Solid State Relays (SSR's): 0.5 A @ 120/240 Vac continuouswiDR23-Z 395 For zSeries units with SSR and Form “C” RelaywiDR24-Z 395 For zSeries units with SSR and Pulsed 10 Vdc @ 20 mA (for use with external SSR)wiDR54-Z 395 For zSeries units with Analog Output 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and Pulsed 10 Vdc @

20 mA (for use with external SSR) and SSR

EMBEDDED WEBSERVERThe NEWPORT wiSeries wireless sensor system iseasy to install, simple to operate, and featuresNEWPORT’s award-winning iServer technology withan Embedded Web Server that requires no specialsoftware.CHARTS AND GRAPHSThe NEWPORT wiDR monitor serves Active WebPages to display real time readings and charts oftemperature, humidity, and barometric pressure. Youcan also log data in standard data formats for use ina spreadsheet or data acquisition program such asExcel or Visual Basic. NEWPORT offers a free andeasy to use program for logging data to Excel.

The virtual chart viewed on the web page is aJAVA™ Applet that records a chart over the LAN orInternet in real time. With the NEWPORT wiSeriessystem there is no need to invest time and moneylearning a proprietary software program to log orchart the data.Chart scales are fully adjustable on the fly. Forexample, the chart can display one minute, onehour, one day, one week, one month or one year.Temperature and humidity can be charted acrossthe full span (-40 to 125°C, and 0 to 100% RH) orwithin any narrow range such as (20 to 30°C).

wiSeries

Sensor 8

Sensor 1ID: 1 Strength: 100%Sequence: 10 Success: 100% Battery: 3.78V Update: 5sec Running

ID: 8 Strength: 94%Sequence: 24 Success: 100% Battery: 3.67V Update: 5sec Running

Temperature Readings of up to 8 Sensors

QUALITY and TECHNOLOGYDesigned and manufactured in the USA, theinnovative NEWPORT® wiSeries of meters &controllers features an extended one (1) YEARwarranty at no extra charge.


wiSeries

Main Menu

CHART

(2 Seconds/Div)1 Minute1 Minute1 Day1 Week1 Month1 Year

0

5C/Div

50 1200

300

100%

0%

10%/Div

90hPa/Div

C hPa

Tue Feb 5 10:19:10 PDT 2008Tue Feb 5 10:18:10 PDT 2008

http://192.168.1.200

Min / Max Temp 48.0/21.0

P1 Process

P2 Sensor 2

P3 Process

P4 Process

P5 Process

P6 Process

P7 Process

P8 Sensor 8

A1 Ambient

A2 Sensor 2

A3 Ambient

A4 Ambient

A5 Ambient

A6 Ambient

A7 Ambient

A8 Sensor 8

Save Current Graph

User-friendly, Simple to Configure Wireless Inputs: Thermocouple, RTD,

Temperature + Humidity + Barometric Pressure Embedded Ethernet (standard) 2 Alarm Outputs: Solid State Relays (SSR’s),

dc Pulse, Mechanical Relays, Analog Voltage & Current

Free Software

zED-TH

wiSeries WirelessMonitoring and ControlSystemThe new NEWPORT wi®Serieswireless monitoring and control systemfeatures meters and scannerscompatible with a large and growingnumber of NEWPORT wirelesssensors: UWTC “Universal WirelessThermocouple” Type J, K, T, E, R, S,B, N, and C.UWRTD “Universal Wireless RTD”. zSeries wireless End Devices withsensors for Temperature, Humidity &Barometric Pressure.

UWTC

$395wi8

UWTC-NB

UWRTD

Meter Scanner & Controller


The wiSeries 1/8 DIN Panel Meter & Controller canmonitor up to eight (8) wireless sensors. The compactinstrument connects directly to an Ethernet networkand the Internet and features NEWPORT’s award-winning embedded Web Server. It is easily configuredand monitored with a Web browser over the Ethernetnetwork or the Internet.Alternatively, the wi8 meter-controller can instead beconnected to the USB port of a single computer with a“USB Ethernet Adapter” that are inexpensive andwidely available. MONITOR AND ALARM The wi8 meter-controller comes standard with a choiceof either two Form C relays, or two SSR’s (solid staterelays) that can be used for control functions or alarms.The wi8 meter can monitor alarm conditions for any orall of the wireless sensors. For example, the wi8 metercan be set up to trip an alarm if any one of the sensorsindicated it was above or below a pre-set alarm point.MONITOR & CONTROL LOCALLY AND OVER THEINTERNETThe new NEWPORT® wiSeries wireless monitoringand control system provides local monitoring andcontrol, along with remote Web-based monitoring oftemperature from thermocouples, RTD’s, andsemiconductor sensors, as well as humidity, andbarometric pressure. The wireless sensors transmit up to 1000m (3280’)* --without obstructions or interference, to a wiSeriesmonitor-controller connected directly to an Ethernetnetwork and the Internet. The wireless systemcomplies with IEEE 802.15.4 operating at 2.4 GHz.* Distances for UWTC-1, UWRTD-1: up to 60m (200 ft), UWTC-2,UWRTD-2: up to 120m (400 ft), zED-*-P: up to 1000m (3280 ft),all distances are without obstructions or interference.

The NEWPORT wiSeries system let’s you monitor andrecord temperature, relative humidity, and barometricpressure over an Ethernet network or the Internetwithout any special software--just your Web Browser.WIRELESS SENSORS NEWPORT offers a wide and growing selection ofwireless sensors for a variety of applications.Depending on application, the wireless sensors arepowered by 2 AA batteries, a single lithium battery(approx. AA size), or an external AC Adapter thatoperates on any voltage worldwide from 100-240 Vac.Wireless sensors are available with external probesappropriate for an almost unlimited variety of industrialand commercial applications.

ETHERNET The wiSeries meter-controller-scanner is anindependent node on the network sending andreceiving data in standard TCP/IP packets. It is easilyconfigured from a Web Browser and can be passwordprotected. From within an Ethernet LAN or over theInternet, the user simply types the IP address (such as192.168.1.200) or an easy to remember name (suchas "Oven 5" or "Chicago TestRoom") and the wiSeriesmeter serves a Web Page with the current readings.ALARM AND EMAIL The wiSeries meter can trigger an alarm if variables goabove or below a set point that you determine. Youralarm can be sent by email to a single user or to agroup distribution list, including text messages to cellphones and PDA’s. The NEWPORT "Mail Notifier"software is a free and easy program for thisapplication.The wiSeriesmeter-controllersoperate on any ACvoltage worldwidefrom 100 to 240Vac and 50 to 60Hz. The meter-controller connectsdirectly to anEthernet Networkor the Internet.Unlike an RS232or USB device, it does not require a host computer.EMBEDDED WEBSERVERThe NEWPORT wiSeries wireless sensor system iseasy to install, simple to operate, and featuresNEWPORT’s award-winning iServer technology withan Embedded Web Server that requires no specialsoftware.CHARTS AND GRAPHS The NEWPORT wiSeries system serves Active WebPages to display real time readings and charts oftemperature, humidity, and barometric pressure. Youcan also log data in standard data formats for use in aspreadsheet or data acquisition program such as Excelor Visual Basic. NEWPORT offers a free and easy touse program for logging data to Excel.The virtual chart viewed on the web page is a JAVA™Applet that records a chart over the LAN or Internet inreal time. With the NEWPORT wiSeries system thereis no need to invest time and money learning aproprietary software program to log or chart the data.

Rear View of wi8


Probe


Barometric Pressure

External TemperatureStick Probe

wiSeries

Sensor 8

Sensor 1ID: 1 Strength: 100%Sequence: 10 Success: 100% Battery: 3.78V Update: 5sec Running

ID: 8 Strength: 94%Sequence: 24 Success: 100% Battery: 3.67V Update: 5sec Running

Temperature Readings of up to 8 Sensors


Chart scales are fully adjustable on the fly. Forexample, the chart can display one minute, one hour,one day, one week, one month or one year.Temperature and humidity can be charted across thefull span (-40 to 125°C, and 0 to 100% RH) or withinany narrow range such as (20 to 30°C).NEWPORT offers an OPC Server software ($295) thatmakes it easy to integrate the wiSeries wireless sensorsystem with many popular Data Acquisition andAutomation programs offered by Omega, Wonderware,iConics, Intellution, Rockwell Automation, and NationalInstruments, among others.PROGRAMMABLE COLOR DISPLAYThe NEWPORTwiSeries featureNEWPORT’spatentedprogrammable colordisplays. The displaycan be programmedto change color atany set point oralarm point.For example, theinstrument can beprogrammed todisplay the processvalue in GREENduring warm-up,switching to AMBERto signal the normaloperating range, andin RED to signal an alarm condition. The changes incolor are quickly seen from a distance, and machineoperators can intuitively react to changing conditions.The colors can be programmed to change back whenthe value drops back below the alarm point or to "latch"on until being reset by the operator.The instrument can also be programmed to displayonly one unchanging color: GREEN, AMBER, or RED.This is a useful way to let an operator identify, at aglance, process values in three separate locations, orto display three different measurements such asTemperature, Pressure, and Flow.

To Order (Specify Model No.)Model No. Price Descriptionwi833-U $395 Wireless Meter/Controller for UWTC units with 2 Relays: Form “C” SPDT 3 A @ 120 Vac, 3 A @

240 Vac, Embedded Ethernet, 90-240 Vac/dc, 50-400 Hzwi844-U 395 For UWTC units with Two Pulsed 10 Vdc @ 20 mA (for use with external SSR)wi852-U 395 For UWTC units with Analog Output selectable as retransmission of process value; 0 to 10 Vdc or

0-20 mA @ 500 ohm max. and SSRwi853-U 395 For UWTC units with Analog Output 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and Form “C” Relaywi822-Z 395 For zSeries units with Two Solid State Relays (SSR's): 0.5 A @ 120/240 Vac continuouswi823-Z 395 For zSeries units with SSR and Form “C” Relaywi824-Z 395 For zSeries units with SSR and Pulse 10Vdc @ 20 mA (for use with external SSR)wi854-Z 395 For zSeries units with Analog Output 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and Pulsed 10 Vdc

@20 mA (for use with external SSR) and SSR

SPECIFICATIONSControl Output 1 & 2Relay: 250Vac or 30Vdc @ 3A (resistive load); configurable for ON/OFFOutput 1: SPDT type, can be configured as Alarm 1 output. Output 2: SPDT type, can be configured as Alarm 2 outputSSR: 20-265Vac @ 0.05 - 0.5A (resistive load); continuousDC Pulse: Non-Isolated; 10 Vdc @ 20 mAAnalog Output (programmable): Non-Isolated,Retransmission 0 to 10Vdc or 0 to 20mA, 500Ω max (Output1 only). Accuracy is ± 1% of FS when following conditionsare satisfied. 1) Input is not scaled below 1% of Input FS. 2) Analog Out is not scaled below 3% of Output FS.Alarm 1 & 2 (programmable)Type: Same as Output 1 and 2Operation: High/low, above/below, band, latch/unlatch,normally open/normally closed and process/deviation; frontpanel configurationsAnalog Output (programmable): Non-Isolated,Retransmission 0 to 10Vdc or 0 to 20mA, 500Ω max (Output1 only). Accuracy is ± 1% of FS when following conditionsare satisfied. 1) Input is not scaled below 1% of Input FS. 2) Analog Out is not scaled below 3% of Output FS.Network and Communications Ethernet: Standards Compliance IEEE 802.3 10Base-T Supported Protocols: TCP/IP, ARP, HTTPGETConnection: Screw terminalsGeneralDisplay: 4-digit, 9-segment LED, 10.2 mm (0.40”) and 21mm (0.83”), red, green and amber programmable colors Protection: Front bezel: NEMA1/Type1Dimensions: 48 H x 96 W x 127 mm D (1.89 x 3.78 x 5")Panel Cutout: 45 H x 92 mm W (1.772" x 3.622"), 1/8 DINOperating Temp: 0 to 55°C (32 to 131°F), 90% RH non-condensingLine Voltage/Power: 90 - 240 Vac ±10%, 50 - 400 Hz*, 110 - 375 Vdc, equivalent voltage * No CE compliance above 60 HzLow Voltage/Power Option: 24 Vac**, 20 - 36 Vdc. Externalpower source must meet Safety Agency Approvals** Units can be powered safely with 24Vac power, but no certification for CE are claimed

QUALITY and TECHNOLOGYDesigned and manufactured in the USA, theinnovative NEWPORT® wiSeries of meters &controllers features an extended one (1) YEARwarranty at no extra charge.

Other outputs options are available, please contact our Sales Department. For Low Power Option (20-36Vdc, 24Vac) add -DC to end of part number: wi833-Z-DC $395 + 25 = $420.

at anyset point

Meter Scanner & Controller


View Temperature + Humidity with a Web Browser

The NEWPORT® iTHX transmitter let’s you monitor andrecord Temperature, Relative Humidity and Dew Pointover an Ethernet network or the Internet with no specialsoftware except a Web Browser.

The NEWPORT iTHX serves Active Web Pages todisplay real time readings, display charts of temperatureand humidity, or log data in standard data formats foruse in a spreadsheet or data acquisition program suchas Excel or Visual Basic.

The virtual chart viewed on the web page is a JAVA™Applet that records a chart over the LAN or Internet inreal time. With the NEWPORT iTHX, there is no needto invest time and money learning a proprietary softwareprogram to log or chart the data.

FCC-B

$295iTHX-2

Temperature + Humidity

Virtual Chart Recorder Web Server Accurate Readings Email Alarms Data Logging No Special Software

Required

®


A second probe can be added at thetime of purchase or in the future.NEWPORT offers a choice ofindustrial probes in 2” and 5” lengths,and a wand style for ambient indoorapplications. A simple DB-9 “Y”connector is available for adding asecond probe to model iTHX-W. Noconnector is required to add a secondprobe to the DIN rail mounted iTHX-2.

Dual channel measurement is availableon model iTHX-W and iTHX-2 only; it isnot available on model iTHX-M.

Temperature 76.37 FHumidity 59.66 %Dewpoint 59.99 F

CH2 Temperature 75.29 FCH2 Humidity 47.73 %CH2 Dewpoint 53.42 F

Title

Main Menu

BothBothCh 1Ch 2

http://206.29.25.26

Read Sensor

Reading Sensor Web Page

Award-winning TechnologyThe NEWPORT iTHX is simple toinstall and use, and featuresNEWPORT’s award-winning iServertechnology that requires no specialsoftware except a Web Browser.

The iTHX connects to an EthernetNetwork with a standard RJ45 connectorand sends data in standard TCP/IPpackets. It is easily configured with asimple menu using a Web Browser andcan be password protected.

From within an Ethernet LAN or overthe Internet, the user simply types itsIP address or an easy to remembername such as "Cleanroom 5" or"Midwest Server Room" in any WebBrowser, and the iTHX serves a WebPage with the current readings.

Typical ApplicationsThe NEWPORT iTHX is great formonitoring temperature + humidity inapplications such as: clean rooms,computer rooms, HVAC systems,pharmaceutical and food processingand storage, hospitals, laboratories,semiconductor fabs, electronicassembly, warehousing, museums,manufacturing, greenhouses, farmanimal shelters, and many more.

NEW iTHX-M with Flash Memoryand LCD DisplayThe NEWPORT model iTHX-M withLCD display, adds several valuablefeatures in addition to the backlit localdisplay of temperature and humidity.

The “Memory” model comes completewith a removable 2 Megabyte FlashMemory card that can store one fullyear of readings taken at one minuteintervals (or two months of readingstaken at ten second intervals).

Up to four years of temperature +humidity readings can be stored onthe 8 Megabyte card.

With data being recorded in the built-innonvolatile flash memory, a failure onthe Ethernet network will not interruptthe data record.

Alarm RelaysThe NEWPORT iTHX-M features two1.5 Amp relays. With the easy Web-based setup page, the two relays canbe programmed for any combinationof temperature or humidity, and highor low set points. The relays can alsobe programmed to remain latchedand require a manual reset if a limit isexceeded.

Email AlarmsIn addition to the mechanical alarmrelays, all NEWPORT iTHX modelsthat are on a LAN that is connected tothe Internet can trigger an alarm thatcan be sent by email to a user or adistribution list anywhere in the world,including an Internet enabled pager orcell phone.

Battery BackupThe iTHX-M comes with an ac adapter.A standard 9 Volt Alkaline battery(also included) allows the device to logdata for up to 10 days without externalac power. In locations without poweror network accessibility, the iTHX-Mcontinues logging data to its flashmemory. The stored data can later bedownloaded over the Ethernet.

NEWPORT iServer products aredesigned and manufactured in SantaAna, California.

View Temperature + Humidityover the Ethernet or Internet

Industrial Probes:THP-5, iTHP-2

Adjustable ChartsChart scales are fully adjustable on the fly. For example, the chart candisplay one minute, one hour, one day,one week, one month or one year.Temperature and humidity can becharted across the full span (0-70°C,and 0-100% RH) or within any narrowrange such as (20-30°C). When asecond sensor is added, users canselect a chart that records channel 1,channel 2 or the difference of the twochannels.

Display and Chart Two Channels(models iTHX-W and iTHX-2 only)The iTHX transmitters come completewith a temperature and humidity probefor measurement of a single location.With the addition of a second probe,the iTHX transmitter can measure anddisplay temperature, humidity anddew point in a second location up totwenty feet away.

The transmitter can display and chartabsolute measurements in bothlocations, or a differential measurementbetween the two locations. Thesecond probe requires no change tothe basic iTHX transmitter hardware,firmware or software.

NIST Traceable CalibrationCertificate available.

In compliance with ISO9001:2000,ISO10012-1.1992(E),

ANSI/NCSL Z540-1.1994 and MIL-STD-45662A.


SoftwareFirmware upgradeable. Including anExcel program for automatic datalogging within definable time intervals,compatible with all Windows operatingsystems.

ManagementDevice configuration and monitoringthrough embedded WEB server.

Temperature + HumiditySensor SpecificationsRelative Humidity (RH)Accuracy/Range: ±2% for 10 to 90%±3% for 0 to 10% and 90 to 100%Non-linearity: ±3%Hysteresis: ±1%RHResponse Time: 4 seconds (63% slowly moving air)Repeatability: ±0.1%Resolution: 0.03%, 12 bitTemperature (T)Range*: 0°C to 70°C (32°F to 158°F)Accuracy*: ±0.5°C ±0.5°C ( ±1°F) for 0 to 80°C (32 to 176°F)±1°C (±2°F) for -40 to 0°C and 80 to124°C (-40 to 32°F and 176 to 254°F)Note: extended temperature range isfor probe only, the iServer’s operatingtemperature is 0-70°C.Response Time: 5 seconds (63% slowly moving air)Repeatability: ±0.1°CResolution: 0.01°C, 14bitProbe Physical DimensionsWand Probe iTHP-WProbe length: Ø19.1mm x 198.1mm(0.75" x 7.8") Cable length 152mm(6”)with DB9 Connector and operatingtemp: 0°C to 80°C (32°F to 176°F)Industrial Probe iTHP-5, iTHP-2:Probe length: Ø16mm x 137mm or51mm (0.63” x 5” or 2”)Housing material: SS316Cable length 6.1m (20’) or 0.9m (3’)Cable with operating temperature: 0°C to 105°C (32°F to 221°F)

iServer SpecificationsInterfacesEthernet: 10Base-T (RJ45) Sensor: Digital 4-wire(DB-9) for iTHX-W, iTHX-M (8 pos. screw terminal) for iTHX-2Supported ProtocolsTCP/IP, UDP/IP, ARP, ICMP, DHCP,DNS, HTTP, and TelnetIndicators (LED's)Network Activity, Network Link,Transmit and Receive/DiagnosticsLCD Display16 Digits 6mm (0.23”) for iTHX-MMemory512 Kbytes Flash, 16 Kbytes SRAMMemory Data Flash Card2 M bytes: 2 months of data storage at10 second logging intervals or 1 yearat 1 minute intervals for iTHX-MRelay OutputsTwo Relays 1.5A @ 30 Vdc iTHX-M

iTHX-M Device ConfigurationWeb Page

No. Device Name Reading OffsetDisplayUnits

DisplayFormat

RemoteFormat

Remote End Char(HEX)

1

2

3

4

5

6

Temperature

Humidity

Dewpoint

Ch2 Temperature

Ch2 Humidity

Ch2 Dewpoint

SRTF

SRH

SRDF

SRTF2

SRH2

SRDF2

F

%

F

F

%

F

decimal

decimal

decimal

decimal

decimal

decimal

TA00.00F

HA00.00%

DA00.00F

TB00.00F

HB00.00%

DB00.00F

0D

0D

0D

0D

0D

0D

000.00

000.00

000.00

000.00

000.00

000.00

DEVICE SETUPhttp://128.100.101.254

Device Setup

Terminal Server


Take Readings

Update

Remote IP Address: Remote Port: Remote Access:

Title:

TCP/UDP: Server Type: Number of Sockets: Port: 02000ContinueTCP

02000 disable0.0.0.0

Click on device no. on left to modify device parameters.

Main Menu

iTHX-W and iTHX-2 Device Configuration Web Page

iTHX Datalogging Spreadsheet

TITLE

Main Menu

http://206.29.25.26

Title

(2 Second/Div)

1 Day

1 Minute

1 Week1 Month1 Year

1 Minute1 Hour

Wed Sep 10 12:00:00 PDT 2003

0

5/Div

50

Temperature 021.17

0

10/Div

100 %

%

Humidity 082.20 -08.88-38.40 C Draw Ch 1

Wed Sep 10 12:00:00 PDT 2003

iTHX-W and iTHX-2 Adjustable Chart Web Page

iTHX-M Adjustable ChartWeb Page with Set Points

Flash Archive

Main Menu

http://128.100.101.254

Title

(1 Hours/Div)

1 Day

1 Day

1 Week1 Month1 Year

1 Minute1 Hour

02/20/2004 09:42:10

32

9.0

F/Div

122

Temperature 73.9

0

100%

%

HumidityArchives_Done 044.2F

02/21/2004 09:42:10

Alarm SP1(above)=044.5 F Alarm SP2(below)=033.5%RH

Embedded WEB ServerServes WEB pages containing real-time data and live updated chartswithin definable time intervals.

PowerInput: 9-12 Vdc iTHX-W, iTHX-M10-32 Vdc iTHX-2Safety Qualified ac power adapter:Nominal Output: 9 Vdc @ 0.5Aincluded for iTHX-W, iTHX-M Input: 100-240Vac, 50/60HzSwitching Power Supply soldseparately for iTHX-2Consumption: 2.5 W max.Battery: 9Vdc, Alkaline iTHX-MEnvironmentalOperating Temperature:0 to 70°C (32 to 158°F)Storage Temperature:-40 to 125°C (-40 to 257°F)PackagingMaterial: Metal case with flangemount for iTHX-W, iTHX-M.Polycarbonate case with DIN Railmount for iTHX-2Dimensions: Refer to MechanicalSpecifications page.


9-12 Vdc

0.25 [6.4]0.25 [6.4]

1.78

[45.

2]

2.42 [61.6]

3.56

[90.

3]3.

50 [8

8.9]

10.6

5 [2

70.4

]

0.14 [3.6]

0.30 [7.7]

3.05 [77.5]3.55 [90.2]

0.82 [20.8]iTHX-W1.44 [36.6]

iTHX-M

Dimensionsshown in

inches (mm)


4.53" [115mm]0.99"

[25.1mm]

3.54

" [9

0.2m

m]

DC POWER IN

DIAG LINK ACT

iTHX-W and iTHX-M

180 g (0.4 lbs) iTHX-W298 g (0.8 lbs) iTHX-M

113 g (0.25 lbs) iTHX-2

Mounts to35mmDIN rails

24Vdc Supply

Switching Power Supplypowers up to 7 units

iDRN-PS-1000

iTHX-2

Model No. Description PriceiTHX-2 iServer MicroServer™ for Temperature + Humidity

and Dew Point. Two Channel Capability. 295* Standard Industrial Probe 5” (137mm), Cable 20ft

(6.1m), Stripped Wire Leads. No Entry Required. N/C-2 Industrial Probe 2” (51mm), Cable 3 ft (0.9 m) with

Stripped Wire Leads. Substitution for 5” Probe. N/CAccessoriesiTHP-2 Industrial Probe 2” (51 mm), Cable 3 ft (0.9 m)

with Stripped Wire Leads. *1 115iTHP-5 Industrial Probe 5” (137 mm), Cable 20 ft (6.1 m)

with Stripped Wire Leads. *1 125iDRN-PS-1000 Power Supply (switching), 95 to 240 Vac input,

24 Vdc output @ 850 mA (powers up to 7 units). 150CAL-3-HU NIST Traceable Calibration Certificate.

Three (3) Humidity Points: 25%, 50%, 75%. Temperature 25°C. (For New Units) 125

CT485B-CAL-KIT Calibration Kit, 33% and 75% RH Standards 75

Model No. Description PriceiTHX-W iServer MicroServer™ for Temperature + Humidity and Dew Point. Two Channel Capability. 295iTHX-M iServer MicroServer™ for Temperature + Humidity, LCD Display, 2M bytes Flash Memory Card,

2 Relay Alarm, and Battery Back-up. Single Channel Only. 395* Standard 8” (203mm) Wand Probe, Cable 6” (152 mm) with DB9 Connector. No Entry Required. N/C

-2 Industrial 2” (51mm) Probe, Cable 3 ft (0.9 m) with DB9 Connector. Substitution for Wand Probe. 15-5 Industrial 5” (137mm) Probe, Cable 20 ft (6.1 m) with DB9 Connector. Substitution for Wand Probe. 25

AccessoriesiTHP-W-6 Replacement 8” (203mm) Wand Probe, Cable 6” (152 mm) with DB9 Connector. 100iTHP-2-DB9 Industrial 2” (51mm) Probe, Cable 3 ft (0.9 m) with DB9 Connector. *1 115iTHP-5-DB9 Industrial 5” (137mm)Probe, Cable 20 ft (6.1 m) with DB9 Connector. *1 125DB9-Y DB9 “Y” Connector Adapter for 2 Probes with DB9 Connector (iTHX-W). 25DB9-CA-3 Extension Cable, 3 ft (0.9m) with DB9 Connector. 15iTH-MC2 Memory Data Flash Card, 2M byte / 1 Year @ 1 Minute Intervals (iTHX-M). 10iTH-MC4 Memory Data Flash Card, 4M byte / 2 Years @ 1 Minute Intervals (iTHX-M). 20iTH-MC8 Memory Data Flash Card, 8M byte / 4 Years @ 1 Minute Intervals (iTHX-M). 30CAL-3-HU NIST Traceable Calibration Certificate. Three Humidity Points: 25%, 50%, 75%. Temp 25°C. (For New Units) 125CT485B-CAL-KIT Calibration Kit, 33% and 75% RH Standards 75

*1 Other lengths of cabble are available, please contact our Sales Department.


22

The NEWPORT® iTH Series instrumentsmonitor and control both temperature andrelative humidity.

All meters and controllers in the series arehigh quality, highly accurate instrumentsfeaturing Newport’s award-winning iSeriestechnology, uncompromising accuracy,and Made in the U.S.A. quality, backed byan extended 5-year warranty.

Humidity + Temperature Controllers

Dual Loop Control Humidity + Temperature High Accuracy ±0.5°C

and ±2% RH 4 Popular DIN Sizes Ethernet and Serial

Communications (optional) 2 Control or Alarm Outputs

(optional) Choice of Relays, SSR,

DC Pulse, Analog Voltageand Current

RH/Temperature Probeincluded

Full Autotune PID Control Programmable Ramp and

Soak for Humidity and/orTemperature

NEMA-4, IP65 Front Bezel

The instruments are simple to configureand use, while providing tremendousversatility and a wealth of powerfulfeatures.

The NEWPORT iTH Series instrumentsare available either as monitors orcontrollers. The monitors are extremelyaccurate programmable digital panelmeters displaying humidity, temperature,or dew point. The controllers also providedual loop control for both humidity andtemperature and are easily programmedfor any control or alarming requirementfrom simple on-off to full autotune PIDcontrol.

The iTH family of meters and controllersare available in four true DIN Sizes withNEMA 4, IP65 splash resistant bezels: theultra compact 1/32 DIN (the world’ssmallest dual loop Humidity + Temperaturecontroller); the popular midsize 1/16 DINsquare bezel with dual display; the 1/8 DINvertical, and the 1/8 DIN horizontal with thebig bright 21mm digits.

The NEWPORT iTH Series LED displayscan be programmed to change colorbetween Green, Amber, and Red at anyset point or alarm point.

The iTH controller models offer a choice oftwo control or alarm outputs in almost anycombination: solid state relays (SSR);Form "C" SPDT (Single Pole DoubleThrow) relays; pulsed 10 Vdc output foruse with an external SSR; or AnalogOutput selectable for control or retrans-mission of the process value.

SPECIFICATIONSControlAction: Reverse (heat) or direct (cool)Modes: Time and Amplitude ProportionalControl Modes; selectable Manual or Auto PID,Proportional, Proportional with Integral,Proportional with Derivative with Anti-resetWindup and ON/OFFRate: 0 to 399.9 secondsReset: 0 to 3999 secondsCycle Time: 1 to 199 seconds; set to 0 forON/OFF operationGain: 0.5 to 100% of span; Setpoints 1 or 2Damping: 0000 to 0008Soak: 00.00 to 99.59 (HH:MM), or OFFRamp to Setpoint:00.00 to 99.59 (HH:MM), or OFFAuto Tune: Operator initiated from front panelfor one input at a time only

with 2 control outputs

$490

$390Monitor

The Networking and Communicationsoptions (highly recommended) includedirect Ethernet LAN connectivity with anEmbedded Web Server, and serialcommunications. The C24 serial commu-nications option includes both RS-232 andRS-485. Protocols include both MODBUSand a straightforward ASCII protocol. TheC4EI option includes both Ethernet and RS-485 ASCII/MODBUS on one device.

The iTH Series meters and controllers aredesigned for easy integration with popularindustrial automation, data acquisition andcontrol programs as well as Microsoft VisualBasic and Excel. NEWPORT® providesfree configuration and data acquisitionsoftware and demos which makes it fastand easy to get up and running with manyapplications.


23

ORDERING EXAMPLES: iTH-i8DH33-5-C4EI is a horizontal 1/8 DIN Dual display with 2 Form C relays, a5” probe and Ethernet with Embedded Web Server $490 + 115 = $605

$490

*1 Analog Output (Option 5) is not available with -AL units.*2 -C4EI or -EI option is not available on the 1/32 DIN. Refer to the iServer section for other Ethernet

devices that can connect to an iTH-i32xx-x-C24 .

SOFTWARE (Requires Network Option) PriceOPC-SERVER LICENSE OPC Server/Driver Software License 295

5.4 (137)

0.63 (16.0) DIA

0.83 (21.1) SQ

20FT(6.1M)

CABLE

96H x 48W x 127D(3.78 x 1.89 x 5")

CUTOUT:92H x 45W(3.62 x 1.77")

iTH-i8DV shown with

-5 Probe

2.0 (51)

0.63 (16.0) DIA

0.83 (21.1) SQ

3FT (0.9M)CABLE

48H x 96W x 127D(1.89 x 3.78 x 5")

CUTOUT:45H x 92W(1.77 x 3.62")

iTH-i8DHshown with

-2 Probe

POWER OUTPUT2 OUTPUT1

BLA

CK

WH

ITE

GR

EE

N

RE

D

SH

IELD N/C

For other mechanical drawings refer to the iSeriesTemperature/Process Controller pages.

Dimensions shown in inches (mm)

To Order (*Specify Model No.)Model Number Description PriceiTH-i8DH ( * ) ( * ) Temperature and RH Input 1/8 DIN Dual Display HorizontaliTH-i8DV ( * ) ( * ) Temperature and RH Input 1/8 DIN Dual Display VerticaliTH-i16D ( * ) ( * ) Temperature and RH Input 1/16 DIN Dual DisplayiTH-i32 ( * ) ( * ) Temperature and RH Input 1/32 DIN Single Display *2

0 0 Monitor version, no control outputs. $3902 2 Two solid state relays (SSR's): 0.5 A @ 120/240 Vac continuous2 3 SSR and relay: Form “C” SPDT 3A @ 120Vac, 3A @ 240Vac2 4 SSR and pulsed 10 Vdc @ 20 mA (for use with external SSR)3 3 2 Relays: Form “C” SPDT 3 A @ 120 Vac, 3 A @ 240 Vac4 2 Pulsed 10 Vdc @ 20 mA (for use with external SSR) and SSR4 3 Pulsed 10 Vdc @ 20 mA (for use with external SSR) and relay4 4 Two pulsed 10 Vdc @ 20 mA (for use with external SSR)5 2 Analog Output selectable as either control or retransmission of

process value; 0 to 10 Vdc or 0-20 mA @ 500 ohm max. & SSR5 3 Analog Output 0 to 10 Vdc or 0-20 mA @ 500 ohm max & Relay5 4 Analog Out 0 to 10Vdc or 0-20mA @ 500 ohm max & Pulse 10Vdc

-AL Limit Alarm Version (Simplified Menu; No PID Control)*1 N/CRH/TEMPERATURE PROBE (must select one) Price

-2 2” (51mm) Probe for iTH with 3ft (0.9m) cable N/C-5 5” (137mm) Probe for iTH with 20ft (6.1m) cable N/C

POWER SUPPLY Price* Standard power input: 90-240 Vac ±10%, 50-400 Hz,

110-375 Vdc, equivalent voltage (*no entry required) N/C-DC Low Voltage Power Option: 12 - 36 Vdc; 24 Vac ±10% 25

NETWORK OPTIONS Price-EI Ethernet with Embedded Web Server 55

-C24 Isolated RS-232 and RS-485/422. 300 to 19.2k Baud 60-C4EI Ethernet with Embedded Web Server + Isolated

RS-485/422 hub for up to 31 devices 115FACTORY SETUP Price

-FS Factory Setup and Configuration (requires Network Option) N/C

Control Output 1 & 2Relay: 250Vac or 30Vdc @ 3A (resistive load);configurable for on/off, PID, Ramp and SoakOutput 1: SPDT type, can be configured asAlarm 1 output. Output 2: SPDT type, can beconfigured as Alarm 2 outputSSR: 20-265Vac @ 0.05 - 0.5A (resistive load);continuousDC Pulse: Non-Isolated; 10 Vdc @ 20 mAAnalog Output (Output 1 only): Non-Isolated,Proportional 0 to 10Vdc or 0 to 20mA; 500Ω maxAlarm 1 & 2 (programmable)Type: Same as Output 1 and 2Operation: High/low, above/below, band,latch/unlatch, normally open/normally closed andprocess/deviation; front panel configurationsAnalog Output (programmable): Non-Isolated,Retransmission 0 to 10Vdc or 0 to 20mA, 500Ωmax (Output 1 only). Accuracy is ± 1% of FSwhen following conditions are satisfied. 1) Input is not scaled below 1% of Input FS. 2) Analog Out is not scaled below 3% of Output FS.

Sensor SpecificationsRelative Humidity Accuracy/Range:±2% for 10 to 90% RH±3% for 0 to 10% RH and 90 to 100% RHHysteresis: ±1% RH; Non-Linearity: ±3%Temperature Accuracy/Range*: ±0.5°C (±1°F) for 0 to 80°C (32 to 176°F) ±1°C (±2°F) for -40 to 0°C and 80 to 124°C (-40 to 32°F and 176 to 254°F)Resolution: 0.03%,12 bit for RH;0.01°C, 14 bit for TemperatureResponse Time: 4 sec for RH; 5 sec for Temp(63% slowly moving air)*Note: extended temperature range is for Probe only, the unit’soperating temperature is 0-50°C

Network and Serial Communications Supported Protocols: TCP/IP, ARP, HTTPGETRS-232/RS-422/RS-485: selectable from menu;both ASCII and Modbus protocol selectablefrom menu. Programmable 300 to 19.2 K baud;complete programmable setup capability; program totransmit current display, alarm status, min/max, actualmeasured input value and status

RS-485: Addressable from 0 to 199Ethernet: Standards Compliance IEEE 802.3 10Base-T Connection: Screw terminalsGeneralA/D Conversion: 12 bit RH and 14 bit Temp.Reading Rate: 2 samples per second max.Digital Filter: ProgrammableDisplay: 4-digit, 9-segment LED• 10.2 mm (0.40"): i32, i16D, i8DV• 10.2 mm (0.40”) & 21 mm (0.83”):i8DH

red, green and amber programmable colors Operating Temperature: 0 to 50°C (32 to 122°F), 90% RH non-condensingPower: Refer to ordering guide below.

No CE compliance above 60 HzUnits can be powered safely with 24Vac power, but no certification for CE/UL are claimed

For other General Specifications, referto the iSeries Common Specs page.

iTH Series


Model TX93A

$74Basic Unit

SpecificationsOutput Range: 4 to 20 mA dcZero and Span AdjustmentRange: ±25% Accuracy: ±0.1% FS (includes effects of linearity,hysteresis and repeatability)Frequency Response: 3dB @ 3HzAmbient Temp. Range:-25 to 85°C (-13 to 185°F)Storage Temp. Range:-65 to 125°C (-85 to 257°F)Supply Voltage: 8 to 35 Vdc; 24 Vdc recommendedMax Loop Vs – 8VResistance: 0.020ADimensions:35.6 D x 23.6 mm H (1.40 x 0.93") (height includes terminal strip)Weight: 15g (0.53oz),25 g (0.8 oz) if epoxy-potted

Mechanical

To Order (Specify Model Number)Model No. Price DescriptionTX93A-(*) 74 Thermocouple transmitter (J,K,T, or E)TX94A-(*) 90 RTD transmitter (100 Ω Pt, alpha = 0.00385)

-P 15 Fully epoxy-potted electronics for extreme environments-FS 25 Special Factory Scaling

Ordering Examples: TX93A-J4, type J, transmitter with 0 to 500°F range, $74.TX93A-K2-P, epoxy-potted type K, transmitter with 0 to 200°F range, $74 + 15 = $89.

Model No.TX93A TX94A Temperature Range

J K T E RTDJ1 E1 1 -40 to 49°C (-40 to 120°F)J2 K2 T2 E2 2 -18 to 93°C (0 to 200°F)J3 K3 T3 E3 3 -18 to 149°C (0 to 300°F)J4 K4 T4 E4 4 -18 to 260°C (0 to 500°F)J5 K5 T5 E5 5 -18 to 399°C (0 to 750°F)J6 K6 E6 6 -18 to 538°C (0 to 1000°F)

Range Codes

NEWPORT Ultra-Miniaturetemperature transmitters convertmillivolt inputs from thermocouples orresistance from RTD’s into 4-20mAoutputs. Transmitters are available incolor-coded enclosures covering thefour most popular thermocouple types(J, K, T and E) as well as three-wire100 Ohm platinum RTD’s.

Featuring state-of-the-art integratedcircuits and electronic design theseultra-compact transmitters have adiameter of only 35.6mm (1.40”) andare designed to fit in many compactthermowell protection heads such asthe NEWPORT NB2.

TX93A and TX94A transmitters caneliminate long runs of costly fieldwiring in a variety of applications.

NEWPORT Ultra-MiniatureTemperature TransmittersThermocouple or RTD

A stable 4-20 mA output signal isprovided proportional to thetransmitters specific input type andcalibrated temperature range (seeRange Code Table below).Adjustability of ±25% for zero andspan is provided to facilitate somerangeability. The transmitted signaleliminates noise pickup, voltagedrops, multiple cold junction errorsand requires only a twisted pair ofcopper wire for loop connections.

All models and ranges of theseNEWPORT ultra-miniaturetransmitters are available with fullyepoxy-potted electronics (specify -P option ) providing the ultimateprotection in extreme environments.

±0.1% FS Accuracy 4-20 mA dc Output Only 1.40" (35.6mm)

Diameter Upscale Break Protection J, K, T or E

Thermocouple Input 100Ω Platinum RTD Input

Notes: (1) Thermocouple Models output proportional to mV output of thermocouple. Notlinearized to temperature. (2) Non-Isolated unit for use with ungrounded probes. (3) Each unitsupplied with complete operator’s manual.

Transmitter

inside!

* Insert range code from chart below.

0.93 [23.6]MAX

0.52 [13.2]

0.480 [12.19] 0.480 [12.19]

0.156 [3.96]for #6-32 SCREW

2 PLCS

0.250 [6.35]

1.40 [35.6]


http://128.100.101.254

R & D Engr.Lab

5000 4000SP1 SP2

Configuration AccessControl**HomePage About

Rate MonirorServ

Message:

Max.

Min.

10000

0

CH A: 3088 HZ CH B: 4561 HZ

A

SP1

B

SP2

AB

3088.0

Mon Nov 24 15:57:43 PST 2003Mon Nov 24 15:24:05 PST 2003

Reset Latch A Reset Latch BReset Timer

5000.0

4561.0

4000.0

0.0

Bar

1Minute(1Sec/Div)

a=Frequency ;b=0.0;c=3089;d=4559 ;e=Rate MoniriServ; f=HZ; g=101; h=5000;i4000;j=1;k=1;l=+;m=12:50:03 Nov,22 2003;a=Frequency ;b=0.0;c=3092;d=4563 ;e=Rate MoniriServ; f=HZ; g=001; h=5000;i4000;j=1;k=1;l=+;m=12:50:04 Nov,22 2003;a=Frequency ;b=0.0;c=3088;d=4561 ;e=Rate MoniriServ; f=HZ; g=101; h=5000;i4000;j=1;k=1;l=+;m=12:50:05 Nov,22 2003;

Applet pulse started

HOMEPAGE

The NEWPORT® iFPX Internet Counter puts “dumb” dataon the World Wide Web. This revolutionary technologytransmits virtually any conventional counting application upto 500 KHz over an Ethernet network or the Internet.The NEWPORT iFPX (Internet Frequency PulseTransmitter) can count contacts from the simplest button orswitch, as well as count pulses from most any conventionaltransducer such as a proximity sensor or quadratureencoder. The iFPX converts raw data to intelligentinformation.The iFPX can be configured as a virtual version of mostany Rate/Frequency Meter, Totalizer, or Batch Controller. Itis a node on an Ethernet network with a unique IP addressand serves the data to any authorized computer on a LAN,WAN or the Internet. Set points can be programmed totrigger an alarm and even send email automatically to aWeb-enabled cell phone.No special software or drivers are required. A user can typethe unit’s IP address (or assigned name) on the addressline of a Web Browser such as Internet Explorer. Thedevice then serves actual JAVA based active Web pagesthat present the information numerically and graphically. The iFPX supports the common Ethernet/InternetProtocols: TCP, UDP, ARP, Telnet, DHCP, DNS, and HTTP.The device integrates seamlessly with data acquisition andindustrial automation program. THe iFPX offers passwordprotection for security.The NEWPORT iFPX provides two discrete input/outputchannels. For applications that use two inputs, it canperform calculations with the data from channels A and Bthat can be presented numerically or graphically, such ascharting position on an XY graph.The NEWPORT iFPX is offered as a PC board for OEMapplications, and as a stand-alone device suitable forindustrial or commercial applications.

Internet Counter

1

Displays Rate, Frequency,Pulse, Total, Batch, and Quadrature over Ethernet and Internet

Web based interface No special software needed Up to 500 KHz input Chart, Bar Graph, and

X / Y displays 2 Channel input / output Custom firmware and private

labeling for OEM's

FCC-B

iFPX-Dwith DIN Rail

Case

iFPX-PCB

®

iFPX-W$245

iFPX-W


* Volume discounts are available. ** Consult NEWPORT OEM team for application assistance and quantitiy pricing.

Internet Counter

http://128.100.101.254

SP1 Value

SP1 Latch Mode

SP1 Active Mode

SP1 Dead Band

SP1 Active Status

SP2 Latch Mode

SP2 Active Mode

SP2 Dead Band

SP2 Active Status

TCP/UPD

Server Type

Number of Sockets

Port

Remote Access

Remote Port

TCP

Continue

0

2000

disable

2000

Remote IP Address

SP2 Value

Unlatch

Above

0

High

Unlatch

Above

0

High

4.00000000E+03

R & D Engr.Lab

CONFIGURATION

5.00000000e+03

Save

SetPoint/Terminal/Remote (Tunneling)

Device Type Selection

Utility

Frequency Save

Save

Save Save

** Configuration AccessControlHomePage About

RateMonirorServ

HZ

R&D Engr.Lab

A Scale

A Offset

Name

Unit of Measure

Title

A Gate Time (mS)

A Debounce Time (mS)

B Scale

B Offset

B Gate Time (mS)

B Debounce Time (mS)

Reading Format

Number of Digits

Decimal Point

A-B Mode

Counter Mode

1.00000000E-00

0

0

0

1.00000000E-00

0

1000

0

Decimal

9

0

+

Count UP0.0.0.0

Configuration Menu

Model No. Description Price*iFPX-W iServer MicroServer™ for Frequency Pulse applications (up to 245

100 KHz input with EMC filtering), with ac power adapteriFPX-D Industrial iServer MicroServer™ for Frequency Pulse applications 245

(up to 100 KHz input with EMC filtering)iFPX-PCB Embedded iServer MicroServer™ for Frequency Pulse applications **

(up to 100 KHz input with EMC filtering) TTL serial interfaceiFPX-W5 iServer MicroServer™ for Frequency Pulse applications (up to 270

500 KHz input without EMC filtering), with ac power adapteriFPX-D5 Industrial iServer MicroServer™ for Frequency Pulse applications 270

(up to 500 KHz input without EMC filtering)iFPX-PCB5 Embedded iServer MicroServer™ for Frequency Pulse applications **

(up to 500 KHz input without EMC filtering) TTL serial interfaceAccessoriesiDRN-PS-1000 Power Supply (switching), 95 to 240 Vac input, 150

24 Vdc output @ 850mA (powers up to 7 units)

SPECIFICATIONSINPUT TYPEDual Input A and B:Min. Low level signal input (magnetic pickups): 120 mVOpen Collector NPN:Max. current source: 1.66 mAOpen Collector PNP:Max. current sink: 5 mATTL/CMOS Input:Low <=0.8 V, High >=3.5 V (For Input: 1 Hz to 30 KHz)Low <=0.8 V, High >=10 V (For Input: 1 Hz to 60 KHz)OPERATING MODESFrequency:Range = 1 Hz to 100 KHzMax. Input Frequency: Input Level 0-5 V: 50 KHz Input Level 0-12 V: 100 KHz Frequency Resolution:1 Hz to 100 KHz / 0.0000000001 HzTotalizer: Range = 0 to 999999999*Totalizer Accuracy: 0.3%A - B Totalize/Frequency:(A input used with B input): Could be A+B, A-B, AxB, A/BRange = -999999999 to 999999999*Batch: Similar to Totalize except theBatch = 0 to 65535Quadrature:Range = -999999999 to 999999999**Resolution is 1 countOutput A and B:Open-collector transistors, rated 150mA sink, 30V. For external supply.EMBEDDED WEB SERVERServes dynamic Web pages and Java applets (256 Kbyte capacity)

NETWORK INTERFACEInterface: Ethernet 10Base-TConnector: RJ45 Protocols: TCP/IP, UDP/IP, ARP,ICMP, DHCP, DNS, HTTP, TelnetINDICATORS (LED’s)Power, Network Activity, Network Linkand DiagnosticsMEMORY512 Kbyte Flash, 16 Kbyte SRAMMANAGEMENTEmbedded Web server, Telnet login,Serial loginGENERALInput Impedance:1M ohm to +EXC 5VExcitation: 5V at 25mA (per chan-nel)Debounce Time: programmableGate Time: programmableISOLATIONDielectric strength per 1 minute testbased on EN 61010.iFPX-W: Pwr to ethernet: 1500VrmsPwr to input/output: noneInput/output to ethernet: 1500 VrmsiFPX-D: Pwr to ethernet: 1500 VrmsPwr to input/output: 1500 VrmsInput/output to ethernet: 1500 VrmsPACKAGING - iFPX-WMaterial: Metal case with flange mountDimensions:20.8H x 61.6W x 90.3D mm (0.83 x 2.93 x 3.56 in)Weight: 180 g (0.4 lbs.)PACKAGING - iFPX-DMaterial: Polycarbonate casewith DIN Rail mountDimensions:90.2H x 25.1W x 115.0D mm(3.54 x .99 x 4.53 in)Weight: 113 g (0.25 lbs.)PACKAGING - iFPX-PCBMaterial: FR-4 Board Surface area:approximately 76 sq mm (3 sq in) Weight: 23 g (0.05 lbs.)

POWER INPUT - iFPX-WInput: 9 Vdc @ 200 mASafety Qualified ac/dc power adapterwith 9Vdc @ 0.5A min, included.POWER INPUT - iFPX-DInput: 10-32 VdcConsumption: 2 W max.(DC power supply sold separately)POWER INPUT - iFPX-PCBInput: 5 Vdc @ 150 mAENVIRONMENTALOperating Temp: 0 to 70°C (32 to 158°F)Storage Temperature:-40 to 125°C (-40 to 257°F)Relative Humidity:90% @ 40°C non-condensing


View Barometric Pressure,Temperature + Humidity witha Web BrowserThe NEWPORT® iBTHX transmitter let’s you monitor andrecord Barometric Pressure, Temperature, Relative Humidityand Dew Point over an Ethernet network or the Internet withno special software except a Web Browser.

The NEWPORT iBTHX serves Active Web Pages to displayreal time readings, display charts of barometric pressure,temperature and humidity, or log data in standard dataformats for use in a spreadsheet or data acquisition programsuch as Excel or Visual Basic.

The virtual chart viewed on the web page is a JAVA™ Appletthat records a chart over the LAN or Internet in real time.With the NEWPORT iBTHX, there is no need to invest timeand money learning a proprietary software program to log orchart the data.

FCC-B

$295iBTX-D

TITLE

Main Menu

http://128.100.101.254

Title

(1 Day/Div)

1 Day

1 Month

1 Week1 Month1 Year

1 Minute1 Hour

Wed Jun 01 12:00:00 PDT 2005

0

5/Div

50

Temp. 0015.7

300

90/Div

0%

100%

hPa

1200

Humi. Pres.0040.9 1020.80005.7 C Temp_Humi_hPa

Tue Jun 28 12:00:00 PDT 2005

Dew.

Barometric Pressure,Temperature + Humidity

Virtual Chart Recorder Web Server Accurate Readings Email Alarms Data Logging No Special Software

Required

1


Display and Chart Measurements The iBTHX transmitters come complete with a barometricpressure, temperature and humidity probe formeasurement of a single location. NEWPORT offers a choice of industrial probes in 5”lengths, and a wand style for ambient indoor applications.Award-winning TechnologyThe NEWPORT iBTHX is simple to install and use, andfeatures NEWPORT’s award-winning iServer technologythat requires no special software except a Web Browser.The iBTHX connects to an Ethernet Network with astandard RJ45 connector and sends data in standardTCP/IP packets. It is easily configured with a simple menuusing a Web Browser and can be password protected.From within an Ethernet LAN or over the Internet, the usersimply types its IP address or an easy to remember namesuch as "Cleanroom 5" or "Midwest Server Room" in anyWeb Browser, and the iBTHX serves a Web Page with thecurrent readings.Typical ApplicationsThe NEWPORT iBTHX is great for monitoring temperature+ humidity in applications such as: clean rooms, computerrooms, HVAC systems, pharmaceutical and foodprocessing and storage, hospitals, laboratories,semiconductor fabs, electronic assembly, warehousing,

museums,manufacturing,greenhouses, farmanimal shelters,and many more.

NEW iBTX-M with Flash Memory and LCD DisplayThe NEWPORT model iBTX-M with LCD display, addsseveral valuable features in addition to the backlit localdisplay of temperature and barometric pressure. The “Memory” model comes complete with a removable 2Megabyte Flash Memory card that can store one full yearof readings taken at one minute intervals (or two months ofreadings taken at ten second intervals). Up to four years of temperature + pressure readings canbe stored on the 8 Megabyte card.With data being recorded in the built-in nonvolatile flashmemory, a failure on the Ethernet network will not interruptthe data record.Alarm RelaysThe NEWPORT iBTX-M features two 1.5 Amp relays. Withthe easy Web-based setup page, the two relays can beprogrammed for any combination of temperature orpressure, and high or low set points. The relays can alsobe programmed to remain latched and require a manualreset if a limit is exceeded.Email AlarmsIn addition to the mechanical alarm relays, all NEWPORTiBTHX models that are on a LAN that is connected to theInternet can trigger an alarm that can be sent by email to auser or a distribution list anywhere in the world, includingan Internet enabled pager or cell phone.

Battery BackupThe iBTX-M comes with a universal ac adapter. A standard9 Volt Alkaline battery (also included) allows the device tolog data for up to 10 days without external ac power. Inlocations without power or network accessibility, the iBTX-M continues logging data to its flash memory. The storeddata can later be downloaded over the Ethernet.NEWPORT iServer products are designed andmanufactured in Santa Ana, California.

View Barometric Pressure and Temperature over the Ethernet or Internet

Adjustable ChartsChart scales are fully adjustable on the fly. For example,the chart can display one minute, one hour, one day, oneweek, one month or one year. Temperature and humidity can be charted across the fullspan (0-70°C, and 0-100% RH) or within any narrow range(such as 20-30°C). Barometric Pressure can be displayedin hectopascals (hPa), millimeters of Mercury (mmHg), orinches of Mercury (inHg).

TITLE

Main Menu

Title

(1 Day/Div)

1 Day

1 Month

1 Week1 Month1 Year

1 Minute1 Hour

Wed Jun 01 12:00:00 PDT 2005

0

5/Div

50

Temp. 0015.7

300

90/Div

0%

100%

hPa

1200

RH Pres.0040.9 1020.80005.7 C Temp_RH_hPa

Tue Jun 28 12:00:00 PDT 2005

Dew.

http://128.100.101.254

Adjustable Chart Web Page

Barometric Pressure,




2


LCD Display16 Digits 6mm (0.23”) for iBTX-MMemory512 Kbytes Flash, 16 Kbytes SRAMMemory Data Flash Card2 M bytes: 2 months of data storage at10 second logging intervals or 1 year at1 minute intervals for iBTX-MRelay OutputsTwo Relays 1.5A @ 30 Vdc for iBTX-MManagementDevice configuration and monitoringthrough embedded WEB server.SoftwareFirmware upgradeable. Including anExcel program for automatic datalogging within definable time intervals,compatible with all Windows operatingsystems.Embedded WEB ServerServes WEB pages containing real-timedata and live updated charts withindefinable time intervals.

iServer SpecificationsInterfacesEthernet: 10Base-T (RJ45) Supported ProtocolsTCP/IP, UDP/IP, ARP, ICMP, DHCP,DNS, HTTP, and TelnetIndicators (LED's)Network Activity, Network Link,Transmit and Receive/Diagnostics

Temperature + HumiditySensor SpecificationsBarometric Pressure (B)Accuracy/Range:±2.0 mbar / 0-1100 mbar (0-110 KPa)Resolution: 0.1 mbarRelative Humidity (H)Accuracy/Range: ±2% for 10 to 90%±3% for 0 to 10% and 90 to 100%Hysteresis: ±1% RHNon-linearity: ±3%Response Time: 4 seconds (63% slowly moving air)Repeatability: ±0.1%Resolution: 0.03%, 12 bitTemperature (T)Range*: 0°C to 70°C (32°F to 158°F)Accuracy*:± 0.8°C @ 20°C (± 1.5°F @ 68°F)± 2°C for -40 to 125°C (± 3.6°F for -40 to 257°F) *Note: extended temperature range isfor Industrial Probe only, the iServer’soperating temperature is 0 to 70°C.

Response Time: 5 seconds (63% slowly moving air)Repeatability: ±0.1°CResolution: 0.01°C, 14bitProbe Physical DimensionsWand Probe:159 mm lg x 19 mm dia (6.25” x 0.75")Cable with DB9 connector: 152 mm long (6")Cable operating temp: 0 to 80°C (32 to 176°F)Industrial Probe:137mm lg x 16mm dia (5” x 0.63")Cable with DB9 or stripped leads: 6.1m long (20’)Cable operating temp: 0 to 105°C (32 to 221°F)

iBTX-M Device ConfigurationWeb Page

No. Device Name Reading Offset Display Units

DisplayFormat

RemoteFormat


1

2

3

4

Temperature

Pressure

Humidity

Dewpoint

SRTF

SRHb

SRH2

SRDF2

F

mbar

%

F

decimal

decimal

decimal

decimal

T00.0F

P0000.0B

H00.0%

D00.0F

0D

0D

0D

0D

0000.0

0000.0

0000.0

0000.0

CONFIGURATIONhttp://128.100.101.254

CONFIGURATION

Terminal Server


Take Readings

Update

Remote IP Address Remote Port Remote Access

Title

TCP/UDP Server Type Number of Connections Port 020005Command Forward CR

Secured Applet

disableTCP

02000 disable0.0.0.0

Click on Device No. on the left to modify Sensor Parameters.

Main Menu

Title______

iBTHX-W and iBTHX-D Device Configuration Web Page

Datalogging Spreadsheet

Title

Main Menu

http://128.100.101.254

Read Sensor

Temperature4 90.5 FPressure4 1007.8 mbarHumidity4 36.6 %Dewpoint4 53.6 F


PowerInput: 9-12 Vdc iBTHX-W, iBTX-M10-32 Vdc iBTHX-DSafety Qualified ac power adapter:Nominal Output: 9 Vdc @ 0.5A; Input: 100 - 240Vac, 50/60 Hz includedfor iBTHX-W, iBTX-MSwitching Power Supply sold separatelyfor iBTHX-DConsumption: 2.5 W max.Battery: 9Vdc, Alkaline iBTX-MEnvironmentalOperating Temperature:0 to 70°C (32 to 158°F)Storage Temperature:-40 to 125°C (-40 to 257°F)PackagingMaterial: Metal case with flange mountfor iBTHX-W, iBTX-M. Polycarbonatecase with DIN Rail mount for iBTHX-DDimensions: Refer to MechanicalSpecifications page.

iP-SC Porous StainlessSteel Cap Option

iBTP-5, iBTHP-5Standard IndustrialProbes with StainlessSteel Mesh Cap

iP-PC Polyethylene CapOption

Optional Capsavailable for bothWand and IndustrialProbes

3


9-12 Vdc

0.25 [6.4]0.25 [6.4]

1.78

[45.

2]

2.42 [61.6]

3.56

[90.

3]2.

00 [5

0.8]

9.15

[232

.3]

0.14 [3.6]

0.30 [7.7]

3.05 [77.5]3.55 [90.2]

0.82 [20.8]

0.12 [3.0]

1.44 [36.6]iBTX-M

iBTHX-W



4.53" [115mm]0.99"

[25.1mm]

3.54

" [9

0.2m

m]

DC POWER IN

DIAG LINK ACT

iBTX-W,iBTHX-W,

and iBTX-M

180 g (0.4 lbs) iBTHX-W298 g (0.8 lbs) iBTX-M

113 g (0.25 lbs) iBTHX-D

Mounts to35mmDIN rails

24Vdc Supply

Switching Power Supplypowers up to 7 units

iDRN-PS-1000

iBTX-D, iBTHX-D

Model No. Description PriceiBTX-D iServer Industrial MicroServer™ for Barometric

Pressure, and Temp. Industrial Probe 5” (137mm), Cable 20ft (6.1m), Stripped Wire Leads 295

iBTHX-D iServer Industrial MicroServer™ for Bar. Pressure, Temp, Humidity, and Dew Point. Industrial Probe 5” (137mm), Cable 20ft (6.1m), Stripped Wire Leads 395

AccessoriesiBTP-5 Industrial Probe 5” (137 mm), Cable 20 ft (6.1 m) w/

Stripped Wire Leads. Barometric Pressure/Temp 125iBTHP-5 Industrial Probe 5” (137 mm), Cable 20 ft (6.1 m) w/

Stripped Wire Leads. Bar. Pressure/Temp/Humidity 195iDRN-PS-1000 Power Supply (switching), 95 to 240 Vac input,

24 Vdc output @ 850 mA (powers up to 7 units) 150

Model No. Description PriceiBTX-W iServer MicroServer™ for Barometric Pressure and Temperature, with universal (100-240Vac) power adapter 295iBTHX-W iServer MicroServer™ for Barometric Pressure, Temperature, Humidity and Dew Point, with ac power adapter 395iBTX-M iServer MicroServer™ for Barometric Pressure and Temperature, LCD Display, 2M bytes Flash Memory

Card, 2 Relay Alarm, and Battery Back-up, with universal (100-240Vac) power adapter 395* Standard Wand Probe, Cable 6” (152 mm) with DB9 Connector (no entry required) N/C-5 Industrial 5” Probe, Cable 20 ft (6.1 m) with DB9 Connector. Substitution for Wand Probe 25

AccessoriesiBTP-W-6 Wand Probe, Cable 6” (152 mm) with DB9 Connector. Barometric Pressure/Temperature 100iBTHP-W-6 Wand Probe, Cable 6” (152 mm) with DB9 Connector. Barometric Pressure/Temperature/Humidity 170iBTP-5-DB9 Industrial 5” (137mm) Probe, Cable 20 ft (6.1 m) with DB9 Connector. Barometric Pressure/Temperature 125iBTHP-5-DB9 Industrial 5” (137mm) Probe, Cable 20 ft (6.1 m) with DB9 Connector. Barometric Pressure/Temp/Humidity 195DB9-CA-3-2 Extension Cable, 3 ft (0.9m) with DB9 Connector 15iTH-MC2 Memory Data Flash Card, 2M byte / 1 Year @ 1 Minute Intervals (iBTX-M) 10iTH-MC4 Memory Data Flash Card, 4M byte / 2 Years @ 1 Minute Intervals (iBTX-M) 20iTH-MC8 Memory Data Flash Card, 8M byte / 4 Years @ 1 Minute Intervals (iBTX-M) 30

Common Accessories PriceCAL-3-HU NIST Traceable Calibration Certificate. 3 Humidity Points: 25%, 50%, 75%, Temp 25°C (for new units) 125CAL-3-HU-P-T NIST Traceable Calibration Certificate. 3 Humidity, Barometric Pressure & Temp Points (for new units) 250CAL-3-P NIST Traceable Calibration Certificate. 3 Barometric Pressure Points, Temp 25°C (for new units) 125CT485B-CAL-KIT Calibration Kit, 33% and 75% RH Standards 75iP-PC Polyethylene Probe Cap, for wet environments N/CiP-SC Porous Stainless Steel Probe Cap, 5um porosity, for dusty and pressurized (< 35 psi) environments 25

4


Universal Inputs

Optional RemoteProgrammer

Display

Amazing Outputs Ethernet TCP/IP Serial RS-232 / RS-485 Autotune PID Control 2 Form C Relays 2 Solid State Relays 2 dc Pulse Programmable-Scalable

Analog Voltage 0-10VdcAnalog Current 0-20mA

Thermocouple RTD Process Voltage Process Current Strain

with 2 control outputs

$310

$240

IT’S AWEBSERVER!


2

PID Controllers and

NEW Controllers and Signal Conditioners withEmbedded Internet NEWPORT introduces a new family of extremely accurate instruments for DINrail mounting. The compact iDR series signal conditioners and PID controllersare available with NEWPORT’s award-winning “Embedded Internet”technology. With the Ethernet option, the instruments connect directly to a LANand can even serve Web pages over the Internet. The devices are easilyconfigured with a handheld programmer iDRP, or from a computer with anEthernet, RS-232, or RS-485 connection.

The universal signal input covers ten (10) Thermocouples, 100 and 1000 OhmRTD’s with 2, 3, or 4 wire connections, Process (dc) Voltage, Current, andStrain Gauge inputs. Optional outputs include Form C SPDT Relays, SSR’s, dc pulse, Programmable Isolated or non-Isolated Analog Voltage and Current.

The innovative NEWPORT® DIN Rail iSeries devices feature state of the arttechnology, uncompromising accuracy, and quality backed by an extended 5-year warranty.

The DIN Rail iSeries family includes extremely accurate signal conditioners andsingle loop PID controllers that are simple to configure and use, while providingtremendous versatility and a wealth of powerful features.

Embedded Internet and Serial CommunicationsFeaturing optional "Embedded Internet" (specify -EI option) the iSeries connectdirectly to an Ethernet network and transmit data in standard TCP/IP packets,or even serve Web pages over a LAN or the Internet. The iSeries are alsoavailable with serial communications. With the -C24 option, the user can selectfrom the optional remote programmer menu between RS-232, RS-422, and RS-485, with straightforward ASCII commands or MODBUS.

iSeries FAMILY The NEWPORT® DIN Rail iSeries is a family of microprocessor-basedinstruments offered in three sizes. All of the instruments share a similar set-upand configuration menu and method of operation, which is a tremendous timesaver for integration of a large system.

High Quality 5-Year Warranty High Accuracy

±0.5°C (0.9°F), 0.03% Reading

Full Autotune PID Control (optional)

User-friendly, Simple to Configure

Embedded Ethernet OPC Server Universal Inputs:

Thermocouple, RTD,Process Voltage / Current, Strain

2 Control or AlarmOutputs (optional) dc Pulse, Solid StateRelays (SSR’s),Mechanical Relays,Analog Voltage &Current

Built-in Excitation Plug Connectors Free Software

®

(Temp/ProcessUnits Only)


3

The optional remoteprogrammer display can be

programmed to change color atany setpoint or alarm point.

Totally ProgrammableColor Displays

at anyset point*

iSeries U.S.Patent#6,243,021

Signal ConditionersQUALITY and TECHNOLOGYDesigned and manufactured in theUSA, the innovative NEWPORT® DINRail iSeries feature an extended five(5) YEAR warranty at no extra charge. The iSeries packs a wealth of powerand features into the smallest ofpackages, utilizing COB (chip-on-board) and SMT (surface mounttechnology) assembly techniques and automation. Every iSeries instrument is thoroughlycalibrated and tested at several stagesthroughout production. The iSeries offers the highestaccuracy for industrial instrumentationat 0.03% of reading. The analog-to-digital conversion utilizes a proprietary20-bit ASIC (application specificintegrated circuit) patented algorithmsand smart filtering.Universal InputsThe innovative iSeries offers thebroadest selection of signal inputsavailable on one industrial instrument.The choices are easily selected fromthe remote programmer menu withfour front panel pushbuttons, or byserial or Ethernet communications.10 Thermocouple TypesThe iSeries handles TEN (10)thermocouple types: K, J, T, E, R, S,B, C, N, and J DIN. The patentedthermocouple linearization algorithmsemployed in the iSeries produce thehighest standard of accuracy.Most Accurate RTD MeasurementsThe iSeries works with the widestselection of RTD's and produces themost accurate RTD measurements.Handles both Pt 0.00385 and 0.00392curves, and 100 (ohm), 500 (ohm) and1000 (ohm). A choice of 2-, 3- and 4-wire RTD connections ensures theabsolute highest degree of accuracy.Process Voltage and CurrentThe iSeries measures processvoltage: 0-100 mVdc, 0-1Vdc, 0-10Vdcranges, and process current: 0-20 mA.Strain GaugeThe Strain/Process (model iSDR)instruments measure inputs from Load Cells, Pressure Transducers,and most any strain gauge sensor, aswell as Process Voltage and Currentranges. Input ranges include 0 to 100 mVdc, -100 mVdc to 1 Vdc, 0 to 10 Vdc in addition to 0-20 mA.The iSDR supports 4 and 6-wirebridge configurations, ratiometric andnon-ratiometric measurements.

The iSDR features fast and easy "inprocess" calibration/scaling of thesignal inputs to any engineering units.The iSDR also features 10 PointLinearization which allows the user tolinearize the signal input from extremelynonlinear transducers of all kinds.Built-in Excitation StandardThe Temperature/Process (model“iDR” and “iDRA”) comes standardwith built-in excitation (24Vdc@25mA).Any excitation voltage between 5 and24 Vdc is available by special order.This means the same instrument canhandle thermocouple, standard RTD's,or 4-20 mA transmitters, with themeter’s built-in excitation. The strain/process (model “iSDR”)comes standard with built-in excitationof 10Vdc @ 60mA, 5Vdc @ 40 mAexcitation is user selectable.Built-in excitation is not available withoptional isolated RS-232/ RS-485 serialcommunications or DC power option.Control FunctionsThe iSeries can control simple manualoperation to ON-OFF and full AutotunePID control. (Selectable preset tune,adaptive tune, PID, PI, PD controlmodes.) The dual control outputs can beconfigured for a variety of independentcontrol and alarm applications such asheat/heat, heat/cool, heat/alarm,cool/cool, cool/alarm or alarm/alarm. The ramp-to-setpoint feature allowsthe user to define the rate of rise tosetpoint, minimizing thermal shock tothe load during start-up. Maximumramp time: 99.59 (HH.MM), Soak: 00.00 to 99.59 (HH.MM),Damping: 1 to 8 in unit steps. For those who only need simplifiedmenus and no PID control, there is aLimit Alarm (-AL) option available.Control or Alarm OutputsA choice of two control or alarmoutputs in almost any combination:solid state relays (SSR) rated at 0.5A@120/240 Vac; Form "C" SPDT(Single Pole Double Throw) relaysrated at 3 amps @120/240 Vac;pulsed 10 Vdc output for use with anexternal SSRAnalog OutputThe optional analog output can beprogrammed within a range of 0-10 Vdc or 0-20 mA. It is selectableas either a control output or as acalibrated retransmission of theprocess value -- a unique featureamong controllers.

Optional Remote Programmer /Color DisplayThe remote programmer/display canbe programmed to change color at anyset point or alarm point. For example,the instrument can be programmed todisplay the process value in GREENduring warm-up, switching to AMBERto signal the normal operating range,and in RED to signal an alarmcondition. The changes in color are quickly seenfrom a distance, and machineoperators can intuitively react tochanging conditions. The colors canbe programmed to change back whenthe value drops back below the alarmpoint or to "latch" on until being resetby the operator.The instrument can also be program-med to display only one unchangingcolor: GREEN, AMBER, or RED. This is a useful way to let an operatoridentify, at a glance, process values inthree separate locations, or to displaythree different measurements such asTemperature, Pressure, and Flow.

iDR

Remote Display


4

Input Type Range AccuracyIron-Constantan -210 to 760°C / -346 to 1400°F 0.4°C / 0.7°F

-270 to -160°C / -160 to 1372°C 1.0°C / 0.4°CCHROMEGA®-ALOMEGA®


Copper-Constantan -454 to -310°F / -310 to 752°F 1.8°F / 0.7°F-270 to -220°C / -220 to 1000°C 1.0°C / 0.4°C

CHROMEGA®-Constantan -454 to -364°F / -364 to 1832°F 1.8°F / 0.7°F-50 to 40°C / 40 to 1768°C 1.0°C / 0.5°C




-250 to -100°C / -100 to 1300°C 1.0°C / 0.4°CNicrosil-Nisil -418 to -148°F / -148 to 2372°F 1.8°F / 0.7°F

J DIN -200 to 900°C / -328 to 1652°F 0.4°C / 0.7°FPt, 0.00385, 100, 500, 1000 -200 to 900°C / -328 to 1652°F 0.4°C / 0.7°FPt, 0.00392, 100, 500, 1000 -200 to 850°C / -328 to 1562°F 0.4°C / 0.7°F

L

ControlAction: Reverse (heat) or direct (cool)Modes: Time and Amplitude ProportionalControl Modes; selectable Manual or Auto PID, Proportional, Proportional withIntegral, Proportional with Derivative withAnti-reset Windup and ON/OFFRate: 0 to 399.9 secondsReset: 0 to 3999 secondsCycle Time: 1 to 199 seconds; set to 0 for ON/OFF operationGain: 0.5 to 100% of span; Setpoints 1 or 2Damping: 0000 to 0008Soak: 00.00 to 99.59 (HH:MM), or OFFRamp to Setpoint:00.00 to 99.59 (HH:MM), or OFFAuto Tune:Operator initiated from front panelControl Output 1 & 2Relay: 250 Vac or 30 Vdc @ 3 A(Resistive Load); configurable for on/off,PID and Ramp and SoakOutput 1: SPDT type, can be configuredas Alarm 1 outputOutput 2: SPDT type, can be configuredas Alarm 2 outputSSR: 20-265 Vac @ 0.05 - 0.5 A(Resistive Load); continuousDC Pulse: Non-Isolated; 10 Vdc @ 20 mAAnalog Output (Output 1 only):Non-Isolated, Proportional 0 to 10 Vdc or 0 to 20 mA; 500 maxAnalog Output (Optional Output 3):Isolated, Retransmission, 0 to 10 Vdc or 0 to 20 mA, 500 max . Accuracy is 1% ofFS, for Scaling Gain from 0.03 to 100 mVper count. Isolation is 1000Vdc. Linearity is 0.2%.Network and Communications(Options -C24, -C4EI, -EI)Ethernet: Standards Compliance IEEE 802.3 10Base-T Supported Protocols:TCP/IP, ARP, HTTPGET

iDR Common Specifications RS-232 / RS-422 / RS-485 / MODBUS:selectable from menu; both ASCII andModbus protocol selectable from menu.Programmable 300 to 19.2 K baud; completeprogrammable setup capability; program totransmit current display, alarm status, min/max,actual measured input value and statusRS-485: Addressable from 0 to 199Connection: Screw terminalsAlarm 1 & 2 (programmable)Type: Same as Output 1 & 2Operation: High/low, above/below, band,latch/unlatch, normally open/normallyclosed and process/deviationAnalog Output (programmable):Non-Isolated, Retransmission 0 to 10 Vdcor 0 to 20 mA, 500 max (Output 1 only).Accuracy is ±1% of FS when the followingconditions are satisfied:1) Input is not scaled below 1% of

Input FS.2) Analog Output is not scaled below 3%

of Output FS.GeneralLine Voltage/Power:90-240 Vac ±10%, 50-400 Hz*, 110-375 Vdc, equivalent voltage* No CE compliance above 60 Hz

Low Voltage/Power Option: 24 Vac**,12-36 Vdc. External power source mustmeet Safety Agency Approvals** Units can be powered safely with 24Vac power, but no

certification for CE/UL are claimed

InsulationPower to Input/Output:2300 Vac per 1 minute tes t 1500 Vac per 1 minute test(For Low Voltage Power Option)Power to Relays/SSR Outputs:2300 Vac per 1 minute testRelays/SSR to Relay/SSR Outputs:2300 Vac per 1 minute testRS-232/485 to Input/Outputs:500 Vac per 1 minute testEnvironmental Conditions:0 to 55°C (32-131°F), (0 to 50°C for UL) 90% RH non-condensing Approvals:UL, C-UL, FM, CE per EN61010-1:2001

Universal Temperature & ProcessInput (Model “iDR”)Accuracy: ±0.5°C temp; 0.03% rdg processResolution: 1°/0.1°; 10 µV processTemperature Stability:1) RTD: 0.04°C/°C2) TC @ 25°C (77°F): 0.05°C/°C -

Cold Junction Compensation3) Process: 50 ppm/°CNMRR: 60 dBCMRR: 120 dBA/D Conversion: Dual slopeReading Rate: 3 samples per secondDigital Filter: ProgrammableInput Types: Thermocouple, RTD, Analog Voltage, Analog CurrentThermocouple Lead Resistance:100 ohm maxThermocouple Type (ITS 90): J, K, T, E, R, S, B, C, N, L RTD Input (ITS 68): 100/500/1000 ohm Pt sensor, 2-, 3- or 4-wire; 0.00385 or 0.00392 curveVoltage Input: 0 to 100 mV, 0 to 1 V,0 to 10 VdcInput Impedance: 10 Mohm for 100 mV, 1 Mohm for 1 or 10 VdcCurrent Input: 0 to 20 mA (5 ohm load)Configuration: Single-endedPolarity: UnipolarStep Response: 0.7 sec for 99.9%Decimal Selection: None, 0.1 fortemperature. None, 0.1, 0.01 or 0.001 forprocessSetpoint Adjustment: -1999 to 9999 countsSpan Adjustment: 0.001 to 9999 countsOffset Adjustment: -1999 to 9999Excitation: 24 Vdc @ 25 mA (not available with -DC, -C24 or -C4EI opt.)

Universal Strain & Process Input(Model “iSDR”)Accuracy: 0.03% readingResolution: 10/1µVTemperature Stability: 50 ppm/°CNMRR: 60 dBCMRR: 120 dBA/D Conversion: Dual slopeReading Rate: 3 samples per secondDigital Filter: ProgrammableInput Types: Analog Voltage, Analog CurrentVoltage Input: 0 to 100 mVdc,-100 mVdc to 1 Vdc, 0 to 10 VdcInput Impedance: 10 Mohm for 100 mV;1 Mohm for 1 V or 10 VdcCurrent Input: 0 to 20 mA (5 ohm load)Linearization Points: Up to 10 Linearization PointsConfiguration: Single-endedPolarity: UnipolarStep Response: 0.7 sec for 99.9%Decimal Selection: None, 0.1, 0.01 or 0.001Setpoint Adjustment:-1999 to 9999 countsSpan Adjustment: 0.001 to 9999 countsOffset Adjustment: -1999 to 9999Excitation: 5Vdc@40mA; 10Vdc@60mA(not available with -DC, -C24 or -C4EI opt.)


To Order (*Specify Model No.)Model Number Description PriceiDR Temperature/Process (no Outputs) 240CONTROL OUTPUTS #1 & 2 Direct (Cool) or Reverse (Heat) ActingiDR ( * ) ( * ) Temperature/Process with 2 Control Outputs 310

2 2 Two solid state relays (SSR's): 0.5 A @ 120/240 Vac continuous2 3 SSR and relay: Form “C” SPDT 3 A @ 120 Vac, 3 A @ 240 Vac2 4 SSR and pulsed 10 Vdc @ 20 mA (for use with external SSR)3 3 2 Relays: Form “C” SPDT 3 A @ 120 Vac, 3 A @ 240 Vac4 2 Pulsed 10 Vdc @ 20 mA (for use with external SSR) and SSR4 3 Pulsed 10 Vdc @ 20 mA (for use with external SSR) and relay:

Form “C” SPDT 3 A @ 120 Vac, 3 A @ 240 Vac 4 4 Two pulsed 10 Vdc @ 20 mA (for use with external SSR)5 2 Analog Output selectable as either control or retransmission of

process value; 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and SSR5 3 Analog Output 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and Relay5 4 Analog Output 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and Pulse 10 Vdc

-AL Limit Alarm Version (Alarm Menu; no PID Control)*2

N/C

NETWORK OPTIONS (One Option Max) Price-EI Ethernet with Embedded Internet *3 (wide case) 55-C24 Isolated RS-232 and RS-485, 300 to 19.2 K baud and Modbus *1 60-C4EI Ethernet with Embedded Web Server + Isolated RS-485/422

hub for up to 31 devices and Modbus *1, *3 (wide case) 115POWER SUPPLY (Select One)

* Standard power input: 90-240 Vac/dc, 50-400 Hz (no entry required) N/C-DC 12-36 Vdc (20-36 Vdc for iDRA), 24 Vac *1 N/CFACTORY SETUP (Requires Network Option)-FS Factory Setup and Configuration N/C


5

ACCESSORIES PriceiDRP Remote Programmer / Display 95

-EI / -C4EI STANDARDISOL. ANALOG

FRONT VIEWS

SIDE VIEW

iDR Mounts to 35 mm DIN rails

*1 -DC, -C24, or -C4EI not available with excitation.*2 Analog Output (Option 5) is not available with -AL units.*3 Ethernet Options are not available for the iDRA controller.*4 iDRA0*-AL: One Analog Retransmission and One Alarm.

ORDERING EXAMPLES: iDR33-EI is a Controller with 2 Form C relays and Ethernet: $365iDRA03-C24 is a Limit Alarm Meter with Isolated Analog Out, Form C Relay and Serial Comm. $425

Temp/Process and Isolated Analog Output

Model Number Isolated Analog Output (medium case) PriceiDRA Temp/Process (no Outputs) w/ Isolated Analog Output *3 295CONTROL OUTPUTS #1 & 2 Direct (Cool) or Reverse (Heat) ActingiDRA ( * ) ( * ) Temp/Process w/ Isolated Analog Output and 2 Outputs *3 365


Form “C” SPDT 3 A @ 120 Vac, 3 A @ 240 Vac 4 4 Two pulsed 10 Vdc @ 20 mA (for use with external SSR)

LIMIT ALARM (*Select One Combination)

iDRA ( 0 ) ( * ) -AL Temp/Process with 1 Output for Isolated Analog Output, 1 Output for Limit Alarm (Alarm Menu; no PID Control)*3,*4 365

2 Solid state relay (SSR's): 0.5 A @ 120/240 Vac continuous3 Relay: Form “C” SPDT 3 A @ 120 Vac, 3 A @ 240 Vac4 Pulsed 10 Vdc @ 20 mA (for use with external SSR)

N/C

N/C

Temp/Process and Isolated Analog OutputMECHANICAL



6

To Order (*Specify Model No.)Model Number Description PriceiSDR Strain/Process (no Outputs) 300CONTROL OUTPUTS #1 & 2 Direct (Cool) or Reverse (Heat) ActingiSDR ( * ) ( * ) Strain/Process with 2 Control Outputs 370


Form “C” SPDT 3 A @ 120 Vac, 3 A @ 240 Vac 4 4 Two pulsed 10 Vdc @ 20 mA (for use with external SSR)5 2 Analog Output selectable as either control or retransmission of

process value; 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and SSR5 3 Analog Output 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and Relay5 4 Analog Output 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and Pulse 10 Vdc

-AL Limit Alarm Version (Alarm Menu; no PID Control)*1

N/C

*1 Analog Output (Option 5) is not available with -AL units.*2 -DC, -C24, or -C4EI not available with excitation.

ORDERING EXAMPLES: iSDR33-EI has 2 Form C relays and Ethernet: $425

NETWORK OPTIONS (One Option Max)-EI Ethernet with Embedded Internet (wide case) 55-C24 Isolated RS-232 and RS-485, 300 to 19.2 K baud and Modbus *2 60-C4EI Ethernet with Embedded Web Server + Isolated RS-485/422

hub for up to 31 devices and Modbus (wide case) *2 115POWER SUPPLY (Select One)

* Standard power input: 90-240 Vac/dc, 50-400 Hz (no entry required) N/C-DC 12-36 Vdc, 24 Vac*2 N/CFACTORY SETUP (Requires Network Option)-FS Factory Setup and Configuration N/C


ACCESORIES PriceiDRP Remote Programmer / Display 95

SIDE VIEW

-EI / -C4EI STANDARD

iSDR Strain / ProcessMECHANICAL


4.70 [119.4]

3.50 [88.9]

2.50 [63.5]

1.25 [31.8]

0.60 [15.2]

0.15 [3.7] 2 PLCS

DISPLAY TEMPLATE

15.24mm[0.60"]

19.00mm[0.75"]

65.61mm[2.59"]

1

2

3.78 [96.0]

1.89 [48.0]

iDRP Remote Programmer / Display

Model No. Description Price

iDRP Remote Programmer / Display, 4 Digit,9-segment LED 21mm (0.83") 95

BAIL MOUNT

PANEL CUT-OUT

MECHANICALDimensions shown in inches (mm)

SIDE VIEWS

PANELMOUNT

iDRP mountsin panel or ona surface withthe includedBail Bracket


View Air (inert gas) Pressure +Temperature with a Web BrowserThe NEWPORT® iPTX transmitter let’s you monitor andrecord Air (inert gas) Pressure (0-200 psi) andTemperature over an Ethernet network or the Internetwith no special software except a Web Browser.The NEWPORT iPTX serves Active Web Pages todisplay real time readings, display charts of air pressureand temperature, or log data in standard data formats foruse in a spreadsheet or data acquisition program suchas Excel or Visual Basic.The virtual chart viewed on the web page is a JAVA™Applet that records a chart over the LAN or Internet inreal time. With the NEWPORT iPTX, there is no need toinvest time and money learning a proprietary softwareprogram to log or chart the data.

FCC-B

$295iPTX-D

Virtual Chart Recorder Web Server Accurate Email Alarms Data Logging No Special Software

Required

1

All iPTX models includea 304 SS, 1/8-27 NPT

pressure transducer withtwist lock connector!

Pressure + TemperatureVirtual Chart Recorder


Display and Chart Measurements The iPTX transmitters come complete with a air pressure /temperature probe for measurement of a single location.

Award-winning TechnologyThe NEWPORT iPTX is simple to install and use, andfeatures NEWPORT’s award-winning iServer technologythat requires no special software except a Web Browser.

The iPTX connects to an Ethernet Network with a standardRJ45 connector and sends data in standard TCP/IPpackets. It is easily configured with a simple menu using aWeb Browser and can be password protected.

From within an Ethernet LAN or over the Internet, the usersimply types its IP address or an easy to remember namesuch as "Cleanroom 5" or "Midwest Server Room" in anyWeb Browser, and the iPTX serves a Web Page with thecurrent readings.

Typical ApplicationsThe NEWPORT iPTX is great for monitoring air (inert gas)pressure and temperature in applications such as: HVACsystems, pharmaceutical and food processing and storage,hospitals, laboratories, semiconductor fabs, electronicassembly, warehousing, manufacturing, greenhouses,farm animal shelters, and many more.

NEW iPTX-M with Flash Memory and LCD DisplayThe NEWPORT model iPTX-M with LCD display, addsseveral valuable features in addition to the backlit localdisplay of temperature and air pressure.

The “Memory” model comes complete with a removable 2 Megabyte Flash Memory card that can store one full yearof readings taken at one minute intervals (or two months ofreadings taken at ten second intervals).

Up to four years of temperature + pressure readings canbe stored on the 8 Megabyte card.

With data being recorded in the built-in nonvolatile flashmemory, a failure on the Ethernet network will not interruptthe data record.

Alarm RelaysThe NEWPORT iPTX-M features two 1.5 Amp relays. Withthe easy Web-based setup page, the two relays can beprogrammed for any combination of temperature orpressure, and high or low set points. The relays can alsobe programmed to remain latched and require a manualreset if a limit is exceeded.

Email AlarmsIn addition to the mechanical alarm relays, all NEWPORTiPTX models that are on a LAN that is connected to theInternet can trigger an alarm that can be sent by email to auser or a distribution list anywhere in the world, includingan Internet enabled pager or cell phone.

Battery BackupThe iPTX-M comes with a universal ac adapter. A standard9 Volt Alkaline battery (also included) allows the device tolog data for up to 10 days without external ac power.

In locations without power or network accessibility, theiPTX-M continues logging data to its flash memory. Thestored data can later be downloaded over the Ethernet.

NEWPORT iServer products are designed andmanufactured in Santa Ana, California.

View Air Pressure and Temperature over the Ethernet or Internet

Adjustable ChartsChart scales are fully adjustable on the fly. For example,the chart can display one minute, one hour, one day, oneweek, one month or one year. Temperature can be charted across the full span (0 to 70°C)or within any narrow range (such as 20-30°C). Air (inert gas) Pressure can be displayed in kilopascals(kPa), pounds per square inch (psi) or kilograms persquare centimeter (Kg/cm2).

PRODUCTION

Main Menu

http://128.100.101.254

PRODUCTION

(1 Day/Div)

1 Day

1 Month

1 Week1 Month1 Year

1 Minute1 Hour

Wed Jun 01 12:00:00 PDT 2005

0

5.0C/Div

50

Temperature 0028.2

0

20.0/Div

200

Pressure 14.72

Tue Jun 28 12:00:00 PDT 2005

C PSI

Adjustable Chart Web Page

Pressure + Temperature





Relay OutputsTwo Relays 1.5A @ 30 Vdc for iPTX-MManagementDevice configuration and monitoringthrough embedded WEB server.

SoftwareFirmware upgradeable. Including anExcel program for automatic data log-ging within definable time intervals,compatible with all Windows operatingsystems.

Embedded WEB ServerServes WEB pages containing real-time data and live updated chartswithin definable time intervals.

PowerInput:9-12 Vdc iPTX-W, iPTX-M10-32 Vdc iPTX-DSafety Qualified ac power adapter:Nominal Output: 9 Vdc @ 0.5A; Input: 100 - 240Vac, 50/60 Hz includ-ed for iPTX-W, iPTX-MSwitching Power Supply sold sepa-rately for iPTX-DConsumption: 2.5 W max.

Battery: 9Vdc, Alkaline iPTX-MEnvironmentalOperating Temperature:0 to 70°C (32 to 158°F)

PackagingMaterial: Metal case with flangemount for iPTX-W, iPTX-M.Polycarbonate case with DIN Railmount for iPTX-DWeight: 272 g (0.60 lbs) iPTX-D363 g (0.80 lbs) iPTX-W;467 g (1.03 lbs) iPTX-MDimensions: Refer to MechanicalSpecifications page.

Virtual Chart RecorderSensor SpecificationsAir (inert gas) Pressure (P)Accuracy/Range:0-200 psi ±2.4 (0-14 bar ±.0.2)

Resolution: 0.006 psi (0.4 mbar)

Maximum safe pressure:250 psi absolute (17 bar abs)

Temperature (T)Accuracy: ±2°C (±3.6°F)

Range: 0 to 70°C (32 to 158°F)

Response Time: 5 seconds

Resolution: 0.01°C, 14bit

Probe Physical DimensionsProbe: 99.0 mm lg x 19.0mm dia (3.9” x 0.75" dia) assembled

Pressure Port: 304 SST, 1/8-27 NPT

Twist Lock Type Connector:PTIH-10-6P and PT06F-10-6S

Cable with DB9 or Stripped Leads: 6.1m long (20’)

Cable operating temperature:0 to 105°C (32 to 221°F)

iServer SpecificationsInterfacesEthernet: 10Base-T (RJ45)

Supported ProtocolsTCP/IP, UDP/IP, ARP, ICMP, DHCP,DNS, HTTP, and Telnet

Indicators (LED's)Network Activity, Network Link,Transmit and Receive/Diagnostics

LCD Display16 Digits 6mm (0.23”) for iPTX-MMemory512 Kbytes Flash, 16 Kbytes SRAM

Memory Data Flash Card2 M bytes: 2 months of data storageat 10 second logging intervals or 1year at 1 minute intervals for iPTX-M

iPTX-M Device ConfigurationWeb Page

No. Device Name Reading Offset Display Units

DisplayFormat

RemoteFormat


1

2

Temperature

Pressure

SRTC

SRH#

C

PSI

decimal

decimal

TA000.0C

P0000.0b

0D

0D

0000.0

0000.0

CONFIGURATIONhttp://128.100.101.254

CONFIGURATION SETUP

Terminal Server


Take Readings

Update

Remote IP Address Remote Port Remote Access

Title

TCP/UDP Server Type Number of Connections Port 020005Continuous Forward CR

Secured Applet

disableTCP

02000 disable0.0.0.0

Click on device no. on the left to modify device parameters.

Main Menu

Production

iPTX-W and iPTX-D Device Configuration Web Page

Datalogging Spreadsheet

Temperature, 24.3 CPressure, 14.7 PSI

Production

Main Menu

http://128.100.101.254

Read Sensor

o


Mounts to35mm DINrails

24Vdc Supply

Switching Power Supply powers up to 7 units

iDRN-PS-1000

CONFIGURATION

CONFIGURATION


9-12 Vdc

ETHERNET RESETACTIVITYNETWORK LINK

DIAGNOSTICS

0.25 [6.4]0.25 [6.4]

1.78 [45.2]

2.42 [61.6]

3.56 [90.3]

0.14 [3.6]

0.30 [7.7]

3.05 [77.5]

3.55 [90.2]

0.82 [20.8]

PRESSURE7 TEMPERATURE

1

91.44 [36.6]iPTX-M

iPTX-W



4.53" [115mm]0.99"

[25.1mm]

3.54

" [9

0.2m

m]

DC POWER IN

DIAG LINK ACT

iPTX-W and iPTX-M

iPTX-D

0.75 [19.1] HEX

PTIH-10-6PCONNECTOR

PT06F-10-6SCONNECTOR

DB9 CONNECTOR orSTRIPPED LEADS

SHIELDED CABLE

1/8-27 NPT

0.38 [9.8]

0.82 [21.0] 1.21 [30.7]

1.83 [46.5] 20' [6.1m] 1.59 [40.4]

iPTP / iPTP-DB9

Model No. Description PriceiPTX-D DIN Rail iServer Industrial MicroServer™ for Air (Inert Gas) Pressure (0-200 psi) and Temperature.

Includes Probe with 20 ft (6.1 m) Cable, Stripped Wire Leads 295iPTX-W iServer MicroServer™ for Air (Inert Gas) Pressure (0-200 psi) and Temperature. Includes Probe

with 20 ft (6.1 m) Cable, DB9 connector and universal (100-240 Vac) power adapter 295iPTX-M iServer MicroServer™ for Air (Inert Gas) Pressure and Temperature. Includes Probe with 20 ft (6.1 m) Cable,

DB9 connector, LCD Display, 2 M bytes Flash Memory Card, 2 Relay Alarm, Battery Back-up, 395and universal (100-240 Vac) power adapter

AccessoriesiPTP Replacement Probe with 20 ft (6.1 m) Cable, Stripped Wire Leads (for iPTX-D) 100iPTP-DB9 Replacement Probe with 20 ft (6.1 m) Cable, DB9 Connector (for iPTX-M / iPTX-M) 125iDRN-PS-1000 Power Supply (switching), 95 to 240 Vac input, 24 Vdc output @ 850 mA, powers up to 7 units (for iPTX-D) 150iTH-MC2 Memory Data Flash Card, 2 M byte / 1 Year @ 1 Minute Intervals (for iPTX-M) 10iTH-MC4 Memory Data Flash Card, 4 M byte / 2 Years @ 1 Minute Intervals (for iPTX-M) 20iTH-MC8 Memory Data Flash Card, 8 M byte / 4 Years @ 1 Minute Intervals (for iPTX-M) 30CAL-3-A NIST Traceable Calibration Certificate. 3 Pressure Points, Temp 25°C (for new units) 125


engineeringstevenengineering.com/tech_support/pdfs/33newp.pdf · engineering engineering dimensions...

Documents