engineering technology - professional & continuing...
TRANSCRIPT
-
Engineering TechnologyOnline Certificate Program
Course Catalog
ceipe.ku.edu/technologytoll-free 877-404-5823
or 785-864-7861
Live Online Sessions
Recorded Sessions
Process Instrumentation
Industrial Automation
Maintenance Management
Reliability
http://kuce.ku.eduhttp://ceipe.ku.edu/technologyhttp://ceipe.ku.edu/technology
-
From the very start, I liked the idea of an online program; however, I was concerned that the material would be difficult to digest because of the lack of a face-to-face experience that a classroom setting offers. Let me just say that it didnt take long for my fear to leave me. Your approach to teaching made me feel comfortable and I was able to relax. David Reasey, Zachry Construction, participant
of Process Instrumentation and Control
-
toll-free 877-404-5823 or 785-864-7861 3
ONLINE CERTIFICATE PROGRAM
Online TrainingThe Center for Engineering and Interdisciplinary Professional Education (CEIPE) at the University of Kansas (KU) offers online technical engineering certificate pro-gramsexplained in detail throughout this catalogthat allow participants to learn from proven instructors. Students get the same training these instructors give in their live seminars without having to travel or spend a large amount of time away from their workplace.
Live Online ClassesSome classes are delivered as live webinars, so students have the opportunity to interact with the instructor. In addition, webinars are recorded so students can view missed sessions or watch a session again. In the catalog, these classes are labeled as Live Online.
On-Demand ClassesOther classes are delivered on an on-demand basis. You can register for these classes and start at any time. Each lesson is delivered as a recorded lecture so attendees can view the classes any time they wish. Students can email the instructor at any time if they have questions or problems. The instructor will reply within two business days. In the catalog, these classes are labeled as On Demand.
CertificatesUpon successful completion of the program modules, participants are awarded a certificate documenting their specialized education and knowledge in their technical field. These certificates serve as evidence of the partici-pants qualifications and competence to present or potential employers.
The University of Kansas ku.eduFounded in 1866, the University of Kansas (KU) is a comprehensive educational and research institution with 31,000 students, more than 2,200 faculty members and 10,000 staff and administrators. The student body includes 6,000 graduate students and 3,000 medical students. KU has more than 170 fields of study and a number of federally funded national research centers housed on campus.
Continuing Education kuce.ku.eduUniversity of Kansas Continuing Education (KUCE), an administrative and educational service division of KU, provides educational opportunities for working profes-sionals, including engineers, managers, doctors, nurses, and law enforcement and fire service officers. It also offers conference management services and lifelong learning opportunities for older adults.
What is CEIPE? ceipe.ku.eduThe Center for Engineering and Interdisciplinary Professional Education (CEIPE) at University of Kansas Continuing Education provides aerospace short courses; online engineering technology certificate programs; engineering management courses and certificates; inter-disciplinary engineering short courses; and conference management services for working professionals within the United States, online and at the worksites of global engineering communities.
CEIPE develops and delivers unique and industry-relevant programs and services that meet the needs of the global professional engineering workforce. It helps engineers, technicians and managers develop expertise in their fields and excel at their jobs.
Online Certificate CoursesProcess Instrumentation & Control Certificate . . . . . . . . . . . . . . . . 4Process Control & Advanced Control Strategies Certificate . . . . . 5Cybersecurity for Industrial Automation & Control Systems . . . . . 6Managing Industrial Controls Online Certificate . . . . . . . . . . . . . . . 7Alarm Management for Industrial Facilities Certificate . . . . . . . . . . 8Batch Process Control Management Certificate . . . . . . . . . . . . . . . 9
Maintenance Management Certificate . . . . . . . . . . . . . . . . . . . . . . . 10How to Successfully Evaluate, Implement and Optimize a
Computerized Maintenance Management System . . . . . . . . . . . 11Managing Maintenance for Buildings and Facilities Certificate . . . . 12Fundamentals of Materials Science and Engineering Certificate . . 13Corrosion Monitoring and Management in Industrial Facilities . . 14
http://ceipe.ku.edu/technologyhttp://ku.eduhttp://kuce.ku.eduhttp://ceipe.ku.edu
-
4 ceipe.ku.edu/engineering-technology-online
PROCESS INSTRUMENTATION & CONTROL CERTIFICATE Instructors: N.E. (Bill) Battikha & John Mohrman LIVE ONLINE
DescriptionThe Process Instrumentation and Control Certificate includes three modules covering the different phases of instrumentation and control from a non-mathematical and practical point of view. It includes basic concepts, engineering, and installation of control equipment.
Participants can expect to learn basics of I&C, including different control
functions, types of control loops, and continuous versus discrete control
identification and symbols used in instru-mentation and control
different types of field instrumentation; principles of operation; advantages and disadvantages; and application of the different types of sensors for flow, level, pressure and temperature measurements
requirements for control rooms and the design of control panels
concepts and implementation of alarm and trip systems
different types of computer-based control systems, including PLCS and DCSS, as well as basic requirements for good opera-tor interface
documentation required for instrumenta-tion and control for front-end engineering and detail design
requirements for a successful installa-tion, instrument checkout and controller tuning
project implementation and project management
decision-making tools, namely, auditing, evaluation of plant needs, justification, and control system evaluation
About the InstructorsOur instructors engineering activities have covered the development of engineering standards and the generation of control philosophies and functional specifications. They have designed complete control systems, guided and inspected the work of engineering consultants, monitored contractors on-site, and personally carried on plant commissioning and startup.
This course is based on Bill Battikhas text, The Condensed Handbook of Measurement and Control, 3rd Edition. The text is published by the International Society of Automation and is one of their best-selling books. The book will be mailed to participants at no additional cost.
Target AudienceThis certificate program is for those who want to learn about the instru-mentation and control field in a condensed time frame and from a practi-cal point of view and/or for those who simply want to communicate technically with instrumentation and control personnel. The program is designed to provide attendees with sufficient knowledge to move into the field of instrumentation and control. It is applicable to technical and supervisory personnel. It is presumed that participants come from a setting where they can apply the knowledge received.
10 CEUsComplete Series. . . . .$2,750
Module 1 only . . . . . .$1,250
Module 2 only . . . . . .$1,000
Module 3 only . . . . . .$1,000
Live online sessions meet Wednesdays, 78 p.m. Eastern Time
Module 1 Sensors and Symbology
Module 2 Control Functions
Module 3 Installation and Engineering Functions
Visit ceipe.ku.edu/engineering-technology-online to see the upcoming dates.
Fee includes instruction and The Condensed Handbook of Measurement and Control, 3rd Edition, by Bill Battikha.
http://ceipe.ku.edu/engineering-technology-onlinehttp://ceipe.ku.edu/engineering-technology-online
-
toll-free 877-404-5823 or 785-864-7861 5
DescriptionThis training course will equip you with the essential knowledge needed for optimizing the performance of your plants controls. The course will teach you the essentials of process dynamics, PID controllers, control-ler tuning methods and advanced regula-tory control. It will also provide you with the know-how for identifying poor control, techniques for troubleshooting control problems and skills for optimizing your control loops.
Participants can expect to gain a solid understanding of process
dynamics and its relevance to controller tuning
obtain insights into the inner workings of PID controllers
learn about different controller types, algorithms, and optionsand when to use which one
discover the appropriate tuning techniques for different process types and tuning objectives
learn how to tune gap, cascade, split-range and override control strategies
develop techniques for quickly assessing the performance of control loops
establish if tuning is the real/only problem affecting a particular control loop
learn how and when to apply cascade and feedforward controls
understand the design, use and tuning of ratio and override controls
discover how to deal with nonlinear processes and control elements
About the InstructorJacques Smuts is the founder and principal consultant of OptiControls Inc. Smuts is a member of ISA, a licensed professional engineer and has been a successful process control practitioner since the early 1990s. He is an expert and has optimized thousands of control loops and solved control problems for many companies on a wide range of processes.
Smuts is an advocate for improving process control and has developed several process control training seminars that he has delivered to hundreds of engineers and technicians in several countries. He has developed industrial controller-tuning and performance-monitoring software that is being used in process plants all over the world. Smuts is a leading authority on process control, controller tuning and control loop performance monitoring.
Target AudienceThis training is suited to entry-level personnel who want to understand process control and learn controller-tuning techniques; and to experi-enced personnel who want to further their professional development. It will also benefit control engineers and technicians, process engineers, process control specialists and instrumentation technicians.
6 CEUsComplete Series. . . . $2,400
Module 1 only . . . . . . $1,100
Module 2 only . . . . . . . $800
Module 3 only . . . . . . . $800
Live online sessions meet Thursdays, 78 p.m. Eastern Time
Module 1 Processes, Controllers & Tuning
Module 2 Assessing Loop Performance & Diagnosing Problems
Module 3 Advanced Control Strategies & Optimization
Visit ceipe.ku.edu/engineering-technology-online to see the upcoming dates.
Fee includes instruction and Process Control for Practitioners, by Jacques Smuts. Students also receive OptiControls Loop Simulator software to practice tuning-simulated process control loops.
PROCESS CONTROL & ADVANCED CONTROL STRATEGIES CERTIFICATE Instructor: Jacques Smuts LIVE ONLINE
I was impressed with the instructors ability to answer questions by using a different perspective instead of restating the same thing. participant of Process Control and Advanced Control Strategies
http://ceipe.ku.edu/engineering-technology-online
-
6 ceipe.ku.edu/engineering-technology-online
CYBERSECURITY FOR INDUSTRIAL AUTOMATION & CONTROL SYSTEMS Instructor: Dr. William (Tim) Shaw ON DEMAND
DescriptionThe course is intended to provide an under-standing of the types of computer- based devices, systems and networks used in modern industrial plants, as well as the ways in which these elements can be compromised via cyber attacks. Attendees will also learn to build risk management techniques to improve their plants cybersecurity.
Participants can expect to learn areas of their plants that are susceptible to
cyber threats trends in industrial security incidents and
the sources of cyber threats foundations of an effective long-term
security program risk and vulnerability analysis
methodologies principles behind the key risk-mitigation
techniques, including firewalls, virtual private networks and personnel hardening
ANSI/ISA99 industrial security guidelines and how they apply to your operation
principles of security policy development
About the InstructorDr. William (Tim) Shaw has more than 35 years of industry experience designing and deploying DCS-, SCADA- and PLC-based industrial control and automation systems in a range of industries, including electric power; oil and gas pipelines; refining; water and wastewater; petrochemical; steel; glass; pharmaceuticals; wind turbines; nuclear power; and substation automation.
He is the author of Cyber Security for SCADA Systems, as well as a con-tributor to three other books. Shaw is a subject-matter expert to the ISA, where he teaches several courses on instrumentation and controls; basics of process measurement; industrial cybersecurity; telecommunications and networking; and database management for industrial automation systems.
Target AudienceThe certificate will benefit SCADA engineers; IT architects; data-systems engineers; instrumentation and control systems professionals; operations engineers; and systems- and network-security personnel. It is applicable to those involved in energy generation; transmission and distribution; water/wastewater; large manufacturing and industrial facilities; and mining industries.
6 CEUsComplete Series. . . . .$1,295
Module 1 Computer and microprocessor-based technologies used for plant and process monitoring, control and safety purposes
Module 2 The cyber vulnerabilities of modern automation devices and systems; how they can be attacked, compromised and exploited
Module 3 Creating cybersecurity defenses, detecting and blocking cyber attacks, hardening our critical automation systems
Register and start the course at any time. Take up to six months to complete the course at your own pace.
http://ceipe.ku.edu/engineering-technology-online
-
toll-free 877-404-5823 or 785-864-7861 7
DescriptionBesides knowledge of controls, the indus-trial controls manager must also have skills in people management, project management and implementation. In addition, an indus-trial controls manager will know how to audit existing equipment, justify the pur-chase of new equipment, and install and maintain the new equipment. This course will provide attendees with the knowledge and the tools required to successfully supervise and manage departments and groups involved in industrial control systems (manufacturing, sales, design, installation or maintenance).
Participants can expect to learn human resources and training skills
related to instrumentation and control, including reward systems and perfor-mance reviews
business development: managing for growth and survival, marketing, and maintaining client relationships
the process of developing corporate standards
project management as related to indus-trial controls
auditing existing controls, and justifying and purchasing new controls
project implementation, including contractors scope-of-work, procurement; programming and documentation; and commissioning and start up
installing and maintaining new industrial controls
auditing control systems
About the InstructorBill Battikhas engineering activities have covered the development of engineering standards and the generation of control philosophies and functional specifications. He has designed complete control systems, guided and inspected the work of engineering consultants, monitored contractors on-site, and personally carried on plant commissioning and startup. He has assisted plants in troubleshooting and resolving prob-lems in engineering, construction and maintenance.
This course is based on Bills latest text, Managing Industrial Controls, published by the International Society of Automation. The book will be mailed to participants at no additional cost.
Target AudienceThis certificate program is for managers of personnel involved in the manufacturing, sales, design, installation or maintenance of industrial control systems. It will also benefit personnel wishing to go into manage-ment of industrial control system related organizations such as manufac-turers, consultants and end-users in all industries. Non-control trained personnel given the responsibility to supervise and manage control personnel, such as the manager of an electrical engineering or IT depart-ment to whom industrial control responsibilities are added, will also find the course to be valuable.
12 CEUsComplete Series. . . . $2,300
Module 1 only . . . . . . . $900
Module 2 only . . . . . . . $850
Module 3 only . . . . . . . $850
Live online sessions meet Thursdays, 7-8 p.m. Eastern Time
Module 1 Setting the Foundation for Managing Control Systems
Module 2 Managing Project Implementation of Control Systems
Module 3 Managing The Installation, Maintenance and Auditing of Control Systems
Visit ceipe.ku.edu/engineering-technology-online to see the upcoming dates.
Fee includes instruction and Managing Industrial Controls, by Bill Battikha.
MANAGING INDUSTRIAL CONTROLS ONLINE CERTIFICATE Instructor: Bill Battikha LIVE ONLINE
http://ceipe.ku.edu/engineering-technology-online
-
8 ceipe.ku.edu/engineering-technology-online
DescriptionThis alarm management course is designed to educate key site personnel on industry standards, best practices, business justifica-tion, safety implications, business issues and the Seven-Step Approach to Effective Alarm Management. The course is based on hundreds of successful alarm improvement projects and an extensive knowledge base about the topic.
Participants can expect to learn a strategy and philosophy of alarm
management alarm performance-review techniques a rational approach to adding and remov-
ing alarms techniques to manage operating upsets
and the subsequent alarms designs that will improve operator aware-
ness and reaction the ISA-18.2 Alarm Management Standard,
using practical methods for compliance the High Performance HMI Overview for
the proper design of graphic depictions used for process control
About the InstructorBill Hollifield is a principal consultant at PAS, a company whose goal is to improve human reliability in industrial facilities and to enhance safety, compliance and profitability. Bill is responsible for the work processes and products, intellectual property, and software product direction for the alarm management and high performance HMI areas. He is a member of the International Society of Automation (ISA) 18 Alarm Management Committee, the ISA-101 HMI committee, and the American Petroleum Institute (API) 1167 Alarm Management Committee. Bill is also a co-author of the Electric Power Research Institutes Alarm Management Guidelines.
Target AudienceThis course will be valuable to process and control engineers; control system technicians; instrumentation technicians; operations supervisors; production operators; and process safety technicians who are dealing with these common problems: No guidelines for adding or deleting alarms. Alarms that activate when there is nothing wrong. Operators who are not required to take any action when an alarm
activates. Alarms that can be ignored and sometimes remain active for long
periods of time. Trivial operating problems which activate more alarms than necessary,
and substantial operating problems which activate an overwhelming flood of alarms.
No alarm system philosophy controlling the plant.
1.2 CEUsComplete series of 11 lessons . . . . . . . . . $995
Register and start the course at any time. Take up to six months to complete the course at your own pace.
Fee includes instruction and the e-book version of Alarm Management Handbook, Second Edition, by Bill Hollifield and Eddie Habibi at no additional cost.
ALARM MANAGEMENT FOR INDUSTRIAL FACILITIES CERTIFICATE Instructor: Bill Hollifield ON DEMAND
http://ceipe.ku.edu/engineering-technology-online
-
toll-free 877-404-5823 or 785-864-7861 9
DescriptionThe focus of instrumentation and control systems has traditionally been on those industries that operate continuous pro-cesses, like petroleum refining and power generation. Those who view batch processes as nothing more than a series of short, continuous processes misunderstand the fundamental differences between the two and may incur lower efficiencies and higher operating costs than necessary. This training course will equip you with the basics needed for choosing, designing and manag-ing a batch control process.
Participants can expect to learn to define the measurements needed and
the control elements to be manipulated in a batch process
the attributes of both continuous processes and discrete processes that are related to a batch process
the elements that make a batch process different from both continuous processes and discrete processes
the elements included in a complete batch recipe
to apply the IEC-61131 standard and the ISA SP88 standard to your batch processes
to maintain safety and flexibility in the batch processes
PLC- and DCS-based batch automation
Phot
o by
Ech
is
About the InstructorDr. William (Tim) Shaw has more than 35 years of industry experience designing and deploying DCS-, SCADA- and PLC-based industrial-control and automation systems in a range of industries, including electric power; oil and gas pipelines; refining; water and wastewater; petrochemical; steel; glass; pharmaceuticals; wind turbines; nuclear power and substation automation. Shaw is a subject-matter expert to the ISA, where he teaches several courses on instrumentation and controls; basics of process measurement; industrial cybersecurity; telecommunica-tions and networking; and database management for industrial automa-tion systems.
Target AudienceEngineers and technicians in the process instrumentation and control fields who are involved in batch processing in industries such as pharma-ceuticals, chemical processing and food processing.
1.6 CEUsComplete series of 11 lessons . . . . . . . . . $995
Register and start the course at any time. Take up to six months to complete the course at your own pace.
BATCH PROCESS CONTROL MANAGEMENT CERTIFICATE Instructor: Dr. William (Tim) Shaw ON DEMAND
I liked how available the instructor was for questions via email. He would always answer back quickly with very honest and complete answers. participant Cybersecurity for Industrial
Automation & Control Systems
I think the instructor did an excellent job. I like the fact that I was able to email in my questions and receive a response very quickly. participant of Process Control and
Advanced Control Strategies
-
10 ceipe.ku.edu/engineering-technology-online
DescriptionMaintenance Management consists of three modulesto help you evaluate your opera-tion; plan, coordinate and schedule mainte-nance; and properly use preventive and predictive maintenance in your operation. The program is designed for all types of maintenance environments including refineries; chemical plants; factories; mines; large buildings; organizations with many smaller buildings; and all types of mobile fleets.
Participants can expect to learn how to plan and schedule maintenance
jobs to improve productivity how to make PM (preventive maintenance)
work for you how to insure the PM tasks are done as
designed, and how to design them how to maximize benefits from your
CMMS (Computerized Maintenance Management System)
ways to re-engineer maintenance that enhance quality, safety, environmental security and uptime
how to use financial modeling of mainte-nance alternatives
basics of RCM (reliability-centered maintenance)
how to use high-technology inspections to make an impact
About the InstructorJoel Levitt is a leading trainer of maintenance professionals. He has conducted more than 500 training sessions for more than 15,000 mainte-nance leaders from 3,000 organizations in more than 20 countries. Since 1980, he has been the president of Springfield Resources, a management consulting firm that services clients of all sizes on a wide range of maintenance issues.
Target AudienceThe certificate will benefit maintenance managers, maintenance direc-tors; superintendents; supervisors; lead hands; CMMS (Computerized Maintenance Management System) managers; planners; engineers; and people who are in training for any of these positions. There is also an advantage to training representatives from operations and stockrooms for their perspectives and input.
8 CEUsComplete Series: . . . .$2,700
Fee includes instruction and texts for the following modules:
Module 1 The Handbook of Maintenance Management, Second Edition, by Joel Levitt
Module 2 Maintenance Planning, Coordinating and Scheduling, Second Edition, by Don Nyman and Joel Levitt
Module 3 The Complete Guide to Preventive and Predictive Maintenance, Second Edition, by Joel Levitt
Live online sessions meet Tuesdays, 7 p.m. Eastern Time
Module 1 Introduction to Maintenance Management
Module 2 Planning and Scheduling Maintenance Activity
Module 3 Preventive and Predictive Maintenance
Visit ceipe.ku.edu/engineering-technology-online to see the upcoming dates.
MAINTENANCE MANAGEMENT CERTIFICATE Instructor: Joel Levit LIVE ONLINE
Material was concise and informative. Text is a valuable resource for others to share. participant of Maintenance Management
http://ceipe.ku.edu/engineering-technology-onlinehttp://ceipe.ku.edu/engineering-technology-online
-
toll-free 877-404-5823 or 785-864-7861 11
DescriptionThis online on-demand seminar covers the objectives, benefits and basic/advanced features of a Computerized Maintenance Management System (CMMS). The course discusses CMMS modules and state-of-the-art technologies that are used with a CMMS. It explains how to develop system specifica-tions for particular applications and how to justify, evaluate and implement a CMMS. It also illustrates how to audit and optimize your CMMS.
Participants can expect to learn: how to improve maintenance productivity how to improve machine quality how to reduce down time how to monitor and improve employee
productivity how to reduce outside contract work how to provide better service to other
departments how to monitor/control maintenance costs how to design and justify an effective
maintenance management system for your organization
About the InstructorKris Bagadia received a bachelors degree in of mechanical engineer-ing and a masters degree in industrial engineering from Marquette University, Milwaukee, Wisc. He is a registered professional engineer (P.E.) and a certified plant engineer (CPE). After eight years of experience as a plant engineer and project manager for three different manufactur-ing companies, Mr. Bagadia founded UNIK Associates, a firm special-izing in maintenance consulting and training. He has been the owner and CEO of UNIK (now PEAK Industrial Solutions) since 1980. He has been involved with every aspect of CMMS for more than two decades, including designing, developing, testing, selling and marketing CMMS. He understands maintenance functionality and how a CMMS can accomplish it.
Target AudienceThis course will be of value to anyone who wants to implement, evaluate and/or improve a CMMS: plant engineers; maintenance supervisors and managers; industrial and manufacturing engineers; maintenance plan-ners and schedulers; and inventory related managers.
1.4 CEUsComplete series . . . . . . $995
Fee includes instruction and the class textbook, Computerized Maintenance Management Systems Made Easy, by Kris Bagadia.
Register and start the course at any time. Take up to six months to complete the course at your own pace.
HOW TO SUCCESSFULLY EVALUATE, IMPLEMENT AND OPTIMIZE A COMPUTERIZED MAINTENANCE MANAGEMENT SYSTEM (CMMS) Instructor: Kris Bagadia ON DEMAND
Text book was very good and the online PowerPoint presentation helped to focus on what needed to be covered in the book. participant of Maintenance Management
For an online course, I am surprised at how well the instructor is able to give individual attention. participant of Process Instrumentation and Control
-
12 ceipe.ku.edu/engineering-technology-online
DescriptionThis program is designed for those who are responsible for management of physical assets such as airports; government build-ings; office buildings; factory buildings; apartment complexes (large- and small-scale); hotels; hospitals; shopping malls; sports and entertainment venues; and other large facilities.
Participants can expect to learn: the scope of responsibilities for the facility
manager structuring a cost-saving project determining what changes are needed, and
where understanding contracts making a preliminary estimate of house-
keeping costs and time stabilizing or cutting costs setting up and getting the most out of a
Work Order system setting up a PM (Preventive Maintenance)
system, with samples of actual PM task lists
lean maintenance for buildings legal liabilities of materials purchases interviewing and selecting contractors estimating the amount of custodial work
About the InstructorJoel Levitt is a leading trainer of maintenance professionals. He has conducted more than 500 training sessions for more than 15,000 mainte-nance leaders from 3,000 organizations in more than 20 countries. Since 1980, he has been the president of Springfield Resources, a management consulting firm that services clients of all sizes on a wide range of maintenance issues.
Target AudienceThis course will benefit facility managers; maintenance managers; build-ing managers; architects; property management company employees; property managers; supervisors; non-maintenance directors accountable for maintenance; leads; maintenance support people; and people who are in training for these positions.
7.2 CEUsComplete series of three modules . . . . . . . . . . . . $1,395
Module 1 Building Management. . . . . . . . . . . . . $500
Module 2 Systems and Procedures . . . . . . . . . . . $500
Module 3 Maintenance and Housekeeping. . . . $500
Fee includes instruction and the class textbook, Facility Management: Managing Maintenance for Buildings and Facilities, by Joel Levitt.
Register and start the course at any time. Take up to six months to complete the course at your own pace.
MANAGING MAINTENANCE FOR BUILDINGS AND FACILITIES CERTIFICATE Instructor: Joel Levitt ON DEMAND
The course was well put together, the instructor points came across clearly. Ive learnt a great deal in this course, which has helped me to deal with and understand some issues in the work place. participant of Managing Industrial Controls
Joel was great. He was very informative and made the class interesting. participant of Maintenance Management
http://ceipe.ku.edu/engineering-technology-online
-
toll-free 877-404-5823 or 785-864-7861 13
DescriptionSince the performance of virtually all plant equipment and facilities is determined by the properties of the various materials which make up the components of those systems, how materials behave is a key part of failure analysis and the related predictive and preventative maintenance of industrial equipment. This course is a comprehensive introduction to materials science and engineering with a practical orientation.
Participants can expect to learn: Materials at the atomic level Polymers and their structures Imperfections in solids Mechanical properties and failure of
materials Phase diagrams and transformation
phenomena Physical properties of materials Applications, fabrication and environ-
mental corrosion of materials
About the InstructorDr. Carl Frahme has more than 40 years of business and industrial expe-rience in materials-related industries. In his previous position, he was involved in developing technology to convert mine tailings and mineral wastes into porcelain-quality ceramic floor, wall and roof tile made from 100-percent waste content. He has been an active consultant since 1987, which led to a wide variety of assignments and a number of employed positions. Prior to his consulting career, he was involved in R&D, product development, management, marketing and sales, and manufacturing.
Target AudienceThis course will benefit maintenance and reliability professionals, who must understand materials for their profession; engineers who have not had a materials science course or need an update in this area; scientists who need a thorough understanding of materials for research and application; as well as product designers, procurement personnel, and government regulators.
3.5 CEUsRegistration for all five models (includes the class textbook, a $150 value) . . . . . . . . . . . . . . . . . $1,250
Module 1 Understanding Materials at the Atomic Level . . . . $250
Module 2 Mechanical Properties and Failure of Materials. . . $250
Module 3 Phase Diagrams of Materials and Transformation Phenomena . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $250
Module 4 Physical Properties of Materials and Their Related Uses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $250
Module 5 Applications, Fabrication, and Environmental Corrosion of Materials. . . . . . . . . . . . . . . . . . . . . . . . . $250
The recommended text for this class is Fundamentals of Materials Science and Engineering, 4th Edition, by William D. Callister and David G. Rethwisch, Wiley. The text will be mailed at no additional cost to those students who at the outset register for the entire five modules.
Register and start the course at any time. Take up to six months to complete the course at your own pace.
FUNDAMENTALS OF MATERIALS SCIENCE AND ENGINEERING CERTIFICATE Instructor: Dr. Carl Frahme ON DEMAND
-
14 ceipe.ku.edu/engineering-technology-online
DescriptionThe most recent study sponsored by the NACE International, The Corrosion Society, showed that the estimated direct cost of corrosion in the United States is $276 billion annually, equal to approximately 3.1 percent of the nations gross domestic product or to about $1,000 per capita annually. The good news is that they also estimated that between 25 and 30 percent of these annual corrosion costs could be saved with the application of good corrosion management practices. This course will help maintenance professionals understand the different types of corrosion, assess the corrosion behavior of materials and utilize corrosion prevention strategies.
Participants can expect to learn: Corrosion of ferrous alloys and non-ferrous
metals Corrosion-assisted fatigue failure Corrosion and degradation of ceramic
materials and polymers Mitigation of corrosion through material
selection and design Inspection, monitoring and maintenance Corrosion in different industries, including
manufacturing, production, energy and transportation
About the InstructorDr. Carl Frahme has more than 40 years of business and industrial expe-rience in materials-related industries. In his previous position, he was involved in developing technology to convert mine tailings and mineral wastes into porcelain-quality ceramic floor, wall and roof tile made from 100-percent waste content. He has been an active consultant since 1987, which led to a wide variety of assignments and a number of employed positions. Prior to his consulting career, he was involved in R&D, product development, management, marketing and sales, and manufacturing.
Target AudienceThis course will benefit maintenance and reliability professionals, inspection engineers, other engineers who are interested in corrosion prevention, product designers, procurement personnel, and government regulators.
3.5 CEUsRegistration for all five models (includes the class textbook, a $150 value) . . . . . . . . . . . . . . . . . $1,250
Module 1 Introduction to Corrosion and the Classes of Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $250
Module 2 Corrosion of Metals . . . . . . . . . . . . . . . . . . . . . . . . . . . $250
Module 3 Cracking, Fatigue Failure, and Corrosion of Polymers and Ceramics. . . . . . . . . . . . . . . . . . . . . . . . $250
Module 4 Mitigation of Corrosion and Estimating Resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $250
Module 5 Corrosion in Different Industries and Case Histories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $250
The recommended text for this class is Corrosion Science and Technology, Second Edition, by David E.J. Talbot and James D.R. Talbot, CRC Press. The text will be mailed at no additional cost to those students who, at the outset, register for all five modules.
Register and start the course at any time. Take up to six months to complete the course at your own pace.
CORROSION MONITORING AND MANAGEMENT IN INDUSTRIAL FACILITIES Instructor: Dr. Carl Frahme ON DEMAND
http://ceipe.ku.edu/engineering-technology-online
-
The University of Kansas prohibits discrimination on the basis of race, color, ethnicity, religion, sex, national origin, age, ancestry, disability, status as a
veteran, sexual orientation, marital status, parental status, gender identity, gender expression and genetic information
in the Universitys programs and activities. The following person has been designated to handle inquiries regarding the
non-discrimination policies: Director of the Office of Institutional Opportunity and Access, [email protected], 1246 W. Campus Road, Room
153A, Lawrence, KS, 66045, 785-864-6414, 711 TTY.
For information, contact:Kevin Curry, senior program manager
[email protected] 785-864-7861 or toll-free in the U.S. 877-404-5823
mailto:IOA%40ku.edu?subject=mailto:kgcurry%40ku.edu?subject=CEIPE%20Online%20Certification
-
ceipe.ku.edu/engineering-technology-onlinetoll-free 877-404-5823 785-864-7861
kucontinuingeducation @KUContinuingEd tiny.cc/linkedin-techmanagement
140710
http://ceipe.ku.edu/engineering-technology-onlinehttp://ceipe.ku.edu/engineering-technology-onlinehttps://www.facebook.com/kucontinuingeducationhttps://www.facebook.com/kucontinuingeducationhttps://twitter.com/KUContinuingEdhttp://https://twitter.com/KUContinuingEdhttps://www.linkedin.com/groups?home=&gid=4526019&trk=anet_ug_hmhttps://www.linkedin.com/groups?home=&gid=4526019&trk=anet_ug_hmhttp://kuce.ku.edu