entrelec-spring-clamp-terminal-blocks

SPRING CONNECTION :

"A TOP ENTRY CONNECTION"

Functionality through ergonomic design.- Clearly visible and very easy to install marking ensures circuit identification. All blocks are

aligned in height to retain quick and easy identification if different size/type blocks are used.- Blocks of the same height are easier/quicker to use regardless of wire sizes.

Maximum space saving is provided by using isolated ferrules.- 16 AWG (1.5 mm2) wires in a 4 mm (.157") spacing block.- 14 AWG (2,5 mm²) wires in a 5 mm (.197") spacing block.- 12 AWG (4 mm²) wires in a 6 mm (.236") spacing block.- 10 AWG (6 mm²) wires in a 8 mm (.315") spacing block.- 8 AWG (10 mm²) wires in a 10 mm (.394") spacing block.

Simple, quick, shield continuity.- A simple and economical accessory ensures shielded wire continuity. This ENTRELEC exclusive

avoids the use of an additional block to connect the shield.

Numerous marking options.Standard ENTRELEC or customized markers easily snap on top of the block for optionalvisibility.

- Up to 8 alphanumeric characters per terminal block, are clear and easy to read.- Marker cards are also available for side markers allowing a total of 3 characters per terminal

block.

Tests points are standard and do not require additional accessories.All ENTRELEC blocks can accept a standard 2 mm test plug from instruments for easy field orfactory trouble shooting or circuit monitoring.

ENTRELEC spring block range: convenience first.Several designed-in features facilitate wiring and connection of accessories. Test sockets arestandard; double sided jumper receptacles allow mixed polarity interconnections.The unique "reversed" spring design is the key to functionality.Bipolar jumper design avoids the use of multiple spring blocks (3 or 4 springs) thus saving spaceand cost.

http://www.clrwtr.com/ABB-Entrelec-Terminal-Blocks.htm

Typical applicationsTypical applicationsTypical applicationsTypical applicationsTypical applications

Connection blocksConnection blocksConnection blocksConnection blocksConnection blocks2 springs 4 springs

4 terminals, 5 mm spacing7 distributed circuits

8 terminals, 5 mm spacing7 distributed circuits

Disconnect terminalsDisconnect terminalsDisconnect terminalsDisconnect terminalsDisconnect terminalsOne pole disconnectable Two poles disconnectable

3 normal terminals + 3 disconnect terminals3 distributed circuits

6 disconnect terminals3 distributed circuits

Fuse disconnect terminalsFuse disconnect terminalsFuse disconnect terminalsFuse disconnect terminalsFuse disconnect terminalsOne protected pole

2 fuse terminals + 2 terminals with neutral cartridge2 distributed circuits

An all-around, all application jumper system.An all-around, all application jumper system.An all-around, all application jumper system.An all-around, all application jumper system.An all-around, all application jumper system.- snaps on without tools,- full current carrying capability.- touch protection exceeds worldwide standards without additional covers,- jumper combs are easily adapted to the application by simply breaking out unwanted

circuits, no tools required.Double polarity jumpering with ENTRELEC's exclusive double jumper receptacle.

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]

800 600 60024 15 15

300 A/1s300 A/1s2.5 mm2 12 AWG 12 AWG

0.12- 426-12 AWG 26-12 AWG

0.12 - 2.5

0.5 - 2.5

IEC UL CSANFC DIN

D 2,5/5.I.3L 50D 2,5/5.I.N.3L 50D 2,5/5.I.3L 50D 2,5/5.I.PI.3L* 50D 2,5/5.I.P.3L** 50

BADL 9 mm 50

FEDL5.I.3L 2.5 mm 50FEDL5.I.3L 2.5 mm 50

BJDL5.2 24 A (1) 50BJDL5.3 24 A (1) 50BJDL5.4 24 A (1) 50BJDL5.5 24 A (1) 20BJDL5.10 24 A (1) 20

CBD5.2L 0.5 mm (1) 50

FEDL5.I.3L

BJDL5....

D 2,5/5.I.3L

D 2,5/5.I.P.3L

9.5 mm / .37"

CBD5.2L

BADL

800 600 60024 15 15

300 A/1s300 A/1s2.5 mm2 12 AWG 12 AWG

0.12- 426-12 AWG 26-12 AWG

0.12 - 2.5

0.5 - 2.5

IEC UL CSANFC DIN

D 2,5/5.I.4L 50D 2,5/5.I.N.4L 50D 2,5/5.I.4L 50D 2,5/5.I.PI.4L* 50D 2,5/5.I.P.4L** 50

BADL 9 mm 50

FEDL5.I.3L 2.5 mm 50FEDL5.I.3L 2.5 mm 50

CBD5.2L 0.5 mm (2) 50

FEDL5.I.3L

D 2,5/5.I.4L

D 2,5/5.I.P.4L

9.5 mm / .37"

CBD5.2L

BADL

Angled terminal blocksFeed through and groundSpring clamp DIN 3

Characteristics

Wire sizemm² / AWG

Voltage VCurrent AShort circuit current (D 2,5/5.I.PI.3L) A / sShort circuit current (D 2,5/5.I.P.3L) A / sRated wire size mm² / AWGWire stripping length mm / inches

SolidStrandedisolated ferrules

D 2,5/5.I.3L - 2.5 mm² blocks - 5 mm .198" spacing

center of rail

Description Type Order P/N Packaging Weightkg

Standard block greyStandard block blueStandard block orangeGround block yellow/greenGround block green/yellow

* Without rail contact - ** With rail contact

Selection

End stop

End section greyorange

Assembled jumper bar 2 poles(with IP20 protection) 3 poles

4 poles5 poles10 poles

Shielding connector

Accessories

center of rail

Characteristics

Wire sizemm² / AWG



D 2,5/5.I.4L - 2.5 mm² blocks - 5 mm .198" spacing

center of rail




Selection

End stop


Shielding connector

Accessories

center of rail

(1) Except for D 2,5/5.I.PI.3L and D 2,5/5.I.P.3L


1SNA 399 903 R0200

1SNA 290 311 R06001SNA 290 314 R0100

1SNA 291 102 R23001SNA 291 103 R24001SNA 291 104 R25001SNA 291 105 R26001SNA 291 110 R2600

1SNA 291 077 R2400


1SNA 399 903 R0200

1SNA 290 311 R06001SNA 290 314 R0100

1SNA 291 077 R2400



800 600 60018

180 A/1s180A/1s1.5 mm2 16 AWG 16 AWG

0.12- 2.526-16 AWG 26-16 AWG

0.12 - 1.5

0.5 - 1

IEC UL CSANFC DIN

D 1,5/4.2L 50D 1,5/4.N.2L 50D 1,5/4.2L 50D 1,5/4.PI.2L* 50D 1,5/4.P.2L** 50

BADL 9 mm 50

FED5.2L 2.5 mm 20FED5.2L 2.5 mm 20

SCD5.2L 2.5 mm 20SCD5.2L 2.5 mm 20

BJDL4.2 18 A (1) 50

CBDS 0.5 mm (1) 50

D 1,5/4.2L

D 1,5/4.P.2L

9.5 mm / .37"

800 600 60018

180 A/1s180 A/1s1.5 mm2 16 AWG 16 AWG

0.12- 2.526-16 AWG 26-16 AWG

0.12 - 1.5

0.5 - 1

IEC UL CSANFC DIN

D 1,5/4.4L 50D 1,5/4.N.4L 50D 1,5/4.4L 50D 1,5/4.PI.4L* 50D 1,5/4.P.4L** 50

9.5 mm / .37"

FED5.2L

BJDL4.2

SCD5.2L

CBDS

BADL

BADL 9 mm 50

FED5.4L 2.5 mm 20FED5.4L 2.5 mm 20

SCD5.4L 2.5 mm 20SCD5.4L 2.5 mm 20

BJDL4.2 18 A (2) 50

FED5.4L

BJDL4.2

FED5.4LSCD5.4L

D 1,5/4.4L

D 1,5/4.P.4L

BADL

SCD5.4L

Feed through and groundterminal blocksSpring clamp DIN 3

Characteristics

Wire sizemm² / AWG

Voltage VCurrent AShort circuit current (D 1,5/4.PI.2L) A / sShort circuit current (D 1,5/4.P.2L) A / sRated wire size mm² / AWGWire stripping length mm / inches


D 1,5/4.2L - 1.5 mm² blocks - 4 mm .158" spacing




Selection

End stop


Separator orangegrey

Jumper bar 2 polesIP20

Shielding connector

Accessories

Characteristics

Wire sizemm² / AWG



D 1,5/4.4L - 1.5 mm² blocks - 4 mm .158" spacing




Selection

Accessories

(1) Except for D 1,5/4.PI.2L and D 1,5/4.P.2L


center of rail

center of rail

End stop



Jumper bar 2 polesIP20

center of rail

center of rail



1SNA 399 903 R0200

1SNA 291 061 R24001SNA 291 062 R2500

1SNA 291 352 R04001SNA 291 351 R0300

1SNA 291 642 R0600

1SNA 291 702 R0400

1SNA 399 903 R0200

1SNA 291 041 R20001SNA 291 042 R2100

1SNA 291 372 R00001SNA 291 371 R0700

1SNA 291 642 R0600


D 2,5/5.2L 50D 2,5/5.N.2L 50D 2,5/5.2L 50D 2,5/5.2L 50D 2,5/5.2L 50D 2,5/5.2L 50D 2,5/5.PI.2L* 50D 2,5/5.P.2L** 50

D 2,5/5.3L 50D 2,5/5.N.3L 50D 2,5/5.3L 50D 2,5/5.PI.3L* 50D 2,5/5.P.3L** 50

D 2,5/5.4L 50D 2,5/5.N.4L 50D 2,5/5.4L 50D 2,5/5.PI.4L* 50D 2,5/5.P.4L** 50

BADL 9 mm 50

FED5.2L 2.5 mm (1) 20FED5.2L 2.5 mm (1) 20FED5.3L 2.5 mm (2) 20FED5.3L 2.5 mm (2) 20FED5.4L 2.5 mm (3) 20FED5.4L 2.5 mm (3) 20

SCD5.2L 2.5 mm (1) 20SCD5.2L 2.5 mm (1) 20SCD5.3L 2.5 mm (2) 20SCD5.4L 2.5 mm (3) 20

BJDL5.2 24 A 50BJDL5.3 24 A 50BJDL5.4 24 A 50BJDL5.5 24 A 20BJDL5.10 24 A 20

CBD5.2L 0.5 mm (1) 50

800 600 60024 15 15

300 A/1s300 A/1s2.5 mm2 12 AWG 12 AWG

0.12- 426-12 AWG 26-12 AWG

0.12 - 2.5

0.5 - 2.5

IEC UL CSANFC DIN

9.5 mm / .37"

D 2,5/5.2L

D 2,5/5.P.2L

D 2,5/5.3L

D 2,5/5.P.3L

FED5...L

BJDL5....

CBD5.2L

SCD5...L

BADL

D 2,5/5.4L

D 2,5/5.P.4L

Feed through and protectionterminal blocksSpring clamp DIN 3

Characteristics

Wire sizemm² / AWG

Voltage VCurrent AShort circuit current (D 2,5/5.PI...L) A / sShort circuit current (D 2,5/5.P...L) A / sRated wire size mm² / AWGWire stripping length mm / inches

D 2,5/5...L - 2.5 mm² blocks - 5 mm .198" spacing


Standard block greyStandard block blueStandard block yellowStandard block orangeStandard block redStandard block blackGround block yellow/greenGround block green/yellow




D 2,5/5.2L Selection

End stop

End section greyorangegreyorangegreyorange

Separator orangegreyorangeorange

Jumper bar 2 polesIP20 3 poles


Shielding connector

Accessories




center of rail

center of rail

center of rail

center of rail

center of rail

center of rail

(1) Only for D 2,5/5....2L (2) Only for D 2,5/5....3L (3) Only for D 2,5/5....4L

1SNA 290 021 R27001SNA 290 023 R21001SNA 290 027 R25001SNA 290 022 R20001SNA 290 024 R22001SNA 290 026 R24001SNA 290 030 R04001SNA 290 029 R0700



1SNA 399 903 R0200

1SNA 291 061 R24001SNA 291 062 R25001SNA 291 051 R22001SNA 291 052 R23001SNA 291 041 R20001SNA 291 042 R2100

1SNA 291 352 R04001SNA 291 351 R03001SNA 291 362 R06001SNA 291 372 R0000


1SNA 291 077 R2400


D 4/6.2L 50D 4/6.N.2L 50D 4/6.2L 50D 4/6.PI.2L* 50D 4/6.P.2L** 50

D 4/6.3L 50D 4/6.N.3L 50D 4/6.3L 50D 4/6.PI.3L* 50D 4/6.P.3L** 50

D 4/6.4L 50D 4/6.N.4L 50D 4/6.4L 50D 4/6.PI.4L* 50D 4/6.P.4L** 50

BADL 9 mm 50

FED5.2L 2.5 mm (1) 20FED5.2L 2.5 mm (1) 20FED6.3L 2.5 mm (2) 20FED6.3L 2.5 mm (2) 20FED6.4L 2.5 mm (3) 20FED6.4L 2.5 mm (3) 20

SCD5.2L 2.5 mm (1) 20SCD5.2L 2.5 mm (1) 20

BJDL6.2 32 A 50BJDL6.3 32 A 50BJDL6.4 32 A 50BJDL6.5 32 A 20

800 600 60032 25 25

480 A/1s480 A/1s

4 mm2 10 AWG 10 AWG

0.2 - 624-10 AWG 24-10 AWG

0.2 - 4

0.5 - 4

IEC UL CSANFC DIN

11 mm / .43"

D 4/6.2L

D 4/6.P.2L

D 4/6.3L

D 4/6.P.3L

FED5...L

BJDL6....

SCD5.2L

BADL

D 4/6.4L

D 4/6.P.4L

Feed throughterminal blocksSpring clamp DIN 3

Characteristics

Wire sizemm² / AWG

Voltage VCurrent AShort circuit current (D 4/6.PI...L) A / sShort circuit current (D 4/6.P...L) A / sRated wire size mm² / AWGWire stripping length mm / inches

D 4/6...L - 4 mm² blocks - 6 mm .238" spacing






D 4/6.2L Selection

End stop

End section greyorangegreyorangegreyorange


Jumper bar 2 polesIP20 3 poles

4 poles5 poles

Accessories

D 4/6.3L Selection

D 4/6.4L Selection


(1) Only for D 4/6....2L (2) Only for D 4/6....3L (3) Only for D 4/6....4L

center of rail

center of rail

center of rail

center of rail

center of rail

center of rail




1SNA 399 903 R0200

1SNA 291 061 R24001SNA 291 062 R25001SNA 291 694 R24001SNA 291 695 R25001SNA 291 696 R26001SNA 291 697 R2700

1SNA 291 352 R04001SNA 291 351 R0300



12.5 mm / .49"

800 600 60041 40 40

720 A/1s720 A/1s

6 mm2 8 AWG 8 AWG

0.5 - 1022-8 AWG 22-8 AWG

0.5 - 6

0.5 - 6

IEC UL CSANFC DIN

D 6/8.2L 50D 6/8.N.2L 50D 6/8.2L 50D 6/8.PI.2L* 50D 6/8.P.2L** 50

BADL 9 mm 50

FED8.2L 2.5 mm 20FED8.2L 2.5 mm 20

BJDL8.2 41 A (1) 50BJDL8.3 41 A (1) 50BJDL8.4 41 A (1) 50BJDL8.5 41 A (1) 20

FED8.2L

BJDL8....

D 6/8.2L

D 6/8.P.2L

BADL

12 mm / .47"

1000 600 60057 50 50

1200 A/1s1200 A/1s

10 mm2 6 AWG 6 AWG

0.5 - 1620-6 AWG 20-6 AWG

0.5 - 10

IEC UL CSANFC DIN

D 10/10.2L 25D 10/10.N.2L 25D 10/10.2L 25D 10/10.PI.2L* 25D 10/10.P.2L** 25

BADL 9 mm 50

FED10.2L 2.5 mm 20FED10.2L 2.5 mm 20

BJDL1.10.2 57 A (2) 50BJDL1.10.3 57 A (2) 50BJDL1.10.4 57 A (2) 50BJDL1.10.5 57 A (2) 50

FED10.2L

BJDL1.10...

D 10/10.2L

D 10/10.P.2L

BADL


Characteristics

Wire sizemm² / AWG

Voltage VCurrent AShort circuit current (D6/8.PI.2L) A / sShort circuit current (D6/8.P.2L) A / sRated wire size mm² / AWGWire stripping length mm / inches


D 6/8.2L - 6 mm² blocks - 8 mm .315" spacing

center of rail




Selection

End stop



4 poles5 poles

Accessories

center of rail

(1) Except for D 6/8.PI.2L and D 6/8.P.2L

Characteristics

Wire sizemm² / AWG

Voltage VCurrent AShort circuit current (D 10/10.PI.2L) A / sShort circuit current (D 10/10.P.2L) A / sRated wire size mm² / AWGWire stripping length mm / inches






Selection

End stop



4 poles5 poles

Accessories


center of rail

center of rail

1SNA 399 903 R0200

1SNA 291 161 R25001SNA 291 162 R2600



1SNA 399 903 R0200

1SNA 291 461 R22001SNA 291 462 R2300




19 mm / .79"

800 600 60076 54 54

1920 A/1s1920 A/1s

16 mm2 6 AWG 6 AWG

0.5 - 2520-6 AWG 20-6 AWG

0.5 - 16

IEC UL CSANFC DIN

D 16/12.2L 25D 16/12.N.2L 25D 16/12.PI.2L* 25D 16/12.P.2L** 25

BADL 9 mm 50

FED12.2L 2.5 mm 10FED12.2L 2.5 mm 10FED12.2L 2.5 mm 10

BJDL12.2 76 A (1) 25

FED12.2L

BJDL12.2

BADL

26 mm / 1.02"

800 600 600125 93 93

4200 A/1s4200 A/1s

35 mm2 2 AWG 2 AWG

2.5 - 5014-2 AWG 14-2 AWG

2.5 - 35

IEC UL CSANFC DIN

D 35/16.2L 10D 35/16.N.2L 10D 35/16.PI.2L* 10D 35/16.P.2L** 10

BADL 9 mm 50

BJDL16.2 115 A (2) 25BJDL16.2

BADL

D 16/12.2L

D 16/12.P.2L

D 35/16.2L

D 35/16.P.2L


Characteristics

Wire sizemm² / AWG

Voltage VCurrent AShort circuit current (D16/12.PI.2L) A / sShort circuit current (D16/12.P.2L) A / sRated wire size mm² / AWGWire stripping length mm / inches




Standard block greyStandard block blueGround block yellow/greenGround block green/yellow


Selection

End stop

End section greybluegreen

Assembled jumper bar 2 poles

Accessories


Characteristics

Wire sizemm² / AWG

Voltage VCurrent AShort circuit current (D 35/16.PI.2L) A / sShort circuit current (D 35/16.P.2L) A / sRated wire size mm² / AWGWire stripping length mm / inches




Standard block greyStandard block blueGround block yellow/greenGround block green/yellow


Selection

End stop

Assembled jumper bar 2 poles(with IP20 protection)

Accessories


center of rail

center of rail

center of rail

center of rail


1SNA 399 903 R0200

1SNA 399 571 R04001SNA 399 572 R05001SNA 399 574 R0700

1SNA 399 563 R0400


1SNA 399 903 R0200

1SNA 399 621 R0600


9.5 mm / .37"

500 300 30020 20 20

2.5 mm2 12 AWG 12 AWG

0.12 - 426-12 AWG 26-12 AWG

0.12 - 2.5

0.5 - 2.5

IEC UL CSANFC DIN

D 2,5/5.D2.L 50D 2,5/5.D2.N.L 50

BADL 9 mm 50

FEDL5.D.L 2.5 mm 20


FEDL5.D.L

BJDL5....

D 2,5/5.D2.L

BADL

D 2,5/5 C3.L

D 2,5/5 C4.L

FED5.C....L

BJDL5...

BADL

Cde

Cde

D 2,5/5 C3L 50D 2,5/5 C4L 50

BADL 9 mm 50

FED5.C3.L 5 mm 20FED5.C3.L 5 mm 20


9.5 mm / .37"

300 300 30017.5 10 10

1.5 mm2 16 AWG 16 AWG

0.14 - 2.526-16 AWG 26-16 AWG

0.14 - 2.5

0.5 - 2.5

IEC UL CSANFC DIN

Feed through terminal blocks - Double deck& terminal blocks for sensors/actuatorsSpring clamp DIN 3

Characteristics

Wire sizemm² / AWG

Voltage VCurrent A

Rated wire size mm² / AWGWire stripping length mm / inches


D 2,5/5.D2.L - 2.5 mm² blocks - 5 mm .198" spacing

center of rail


Standard block greyStandard block blue

Selection

End stop

End section grey



Accessories

center of rail

center of rail

D 2,5/5 C....L - 1.5 mm² blocks - 5 mm .198" spacing


Standard block greyStandard block grey

Selection

End stop

End sections greygrey



Accessories

Characteristics

Wire sizemm² / AWG

Voltage VCurrent A



1SNA 290 161 R00001SNA 290 163 R0200

1SNA 399 903 R0200

1SNA 291 441 R2600


1SNA 290 350 R21001SNA 290 354 R1100

1SNA 399 903 R0200

1SNA 290 358 R25001SNA 290 360 R2300



9.5 mm / .37"

400 V/ 250 V (2) 300 V 300 V400V (3)

6 kV / 4 kV (2)6 kV (3)

20A (1), 24A 20 A 20 A300 A/1s2.5 mm2 /A2 12 AWG 12 AWG

0.14 - 4 mm²26-12 AWG 26-12 AWG

0.14 - 2.5 mm²

IEC UL CSANFC DIN

D 2,5/5.LLP.L

D 2,5/5.NLP.L

BADL 9 mm 50

FED5.L.A 2,5 mm 20FED5.L.B 2,5 mm 20

BJDL5.2 50BJDL5.3 50BJDL5.4 50BJDL5.5 50BJDL5.10 50

D 2,5/5.NTLP.L 40

D 2,5/5.NLP.L 40

D 2,5/5.LLP.L 40

0.5 - 2.5 mm²

10 x 3 mm

D 2,5/5.NTLP.L

D 2,5/5.LL.L

D 2,5/5.NL.L

D 2,5/5.NL.L 40

D 2,5/5.LL.L 40

D 2,5/5.LL.L

D 2,5/5.NL.L

D 2,5/5.LLP.L

D 2,5/5.NLP.L

D 2,5/5.NTLP.L

BADLFED5.L.A

FED5.L.B BJDL5...

Terminal blocks for distribution boxesSpring clampSpring clamp - Spring clamp DIN 3

Characteristics

Wire sizemm² / AWG

Voltage V

Pulse kV

Rated Current AShort circuit current (2) A / sRated wire size mm² / AWGWire stripping length mm / inches

SolidStranded

D 2,5/5... .L - 2,5 mm² closed blocks - 5 mm .198" spacing

End stop V0

End section (1) grey V0End section (3) grey V0

Jumper bar orange 2 polesIP20 - 24 A 3 poles


Accessories

1 circuit "disconnect neutral" with busbar connection, blue marking1 circuit "feed-through"1 circuit "ground" connected to the rail, yellow/green marking


Selection

Spring block grey V0



Isolating coverGround bar (1)

1 circuit "neutral", blue marking1 circuit "feed-through"1 circuit "ground" connected to the rail, yellow/green marking

2 circuits "feed-through"1 circuit "ground" connected to the rail, yellow/green marking



1 circuit "neutral", blue marking1 circuit "feed-through"

2 circuits "feed-through"

center of rail

center of rail

center of rail

center of rail

center of rail

(1) For D 2,5/5.NTLP.L only

(2) For D 2,5/5.NTLP.L, D 2,5/5.NLP.L, D 2,5/5.LLP.L

(3) For D 2,5/5.NL.L and D 2,5/5.LL.L

(4) Except for D 2,5/5.NTLP.L

1SNA 290 322 R0100

1SNA 290 324 R0300

1SNA 290 326 R0500

1SNA 290 330 R1500

1SNA 290 328 R1700

1SNA 399 903 R0200

1SNA 291 559 R04001SNA 291 560 R0100



D 2,5/5.NT.L 50

BADL 9 mm 50

FED5.2L 2,5 mm 20FED5.2L 2,5 mm 20

SCD5.2L 2,5 mm 20

BJDL5.2 50BJDL5.3 50BJDL5.4 50BJDL5.5 50BJDL5.10 50

D 2,5/5.NT.L

D 4/6.NT.L

9.5 mm / .374"

400 V6 kV24 A

2.5 mm2 / A2

IEC UL CSANFC DIN

0.12 - 4 mm²

0.12 - 2.5 mm²

0.5 - 2.5 mm²

10 x 3 mm - .394" x .12"

D 4/6.NT.L 50

11 mm / .43"

400 V6 kV32 A

4 mm2 / A4

IEC UL CSANFC DIN

0.2 - 6 mm²

0.22 - 4 mm²

10 x 3 mm - .394" x .12"

BADL 9 mm 50

FED6.NL 2,5 mm 20

VRPA1 20

BJDL6.2 50BJDL6.3 50BJDL6.4 50BJDL6.5 50

BADLFED5.2L

SCD5.2L

BJDL5...

BADLFED6.NL

VRPA1BJDL6...

D 2,5/5.NT.L - 2.5 mm² blocks - 5 mm .197" spacing

center of rail


Terminal block, 1 springSwitch for neutral conductor

blue

Selection

End stop V0

End section grey V0orange V0

Separator orange V0

Jumper bar orange V0 2 polesIP 20 - 24 A 3 poles


D 4/6.NT.L - 4 mm² blocks - 6 mm .236" spacing

Accessories

Characteristics

Wire size (Screw clamp)mm² / AWG

Voltage VPulse kVCurrent ARated wire size mm² / AWGWire stripping length mm / inches

SolidStranded

Terminal blocksSpring clampSwitch for neutral conductor DIN 3

With isolated ferruleBusbar



blue

Selection

Accessories

Characteristics



SolidStranded

With isolated ferrule

center of rail

End stop V0

End section grey V0

Separator orange


4 poles5 poles

1SNA 290 045 R0700

1SNA 399 586 R2400

1SNA 399 903 R0200

1SNA 291 061 R24001SNA 291 062 R2500

1SNA 291 352 R0400


1SNA 399 903 R0200

1SNA 399 588 R0600

1SNA 399 587 R2500



D01082 031224 1SNC 160 003 C0205

D 6/8.NT.L

D 10/10.NT.L

12.5 mm / .49"

400 V6 kV41 A

6 mm2 / A5

IEC UL CSANFC DIN

0.5- 10 mm²

0.5 - 6 mm²

10 x 3 mm - .394" x .12"

12.5 mm / .49"

400 V6 kV57 A

10 mm2 / A6

IEC UL CSANFC DIN

0.5 - 16 mm²

0.5 - 10 mm²

10 x 3 mm - .394" x .12"

D 10/10.NT.L 25

D 6/8.NT.L 50

BADL 9 mm 50

FED8.NL 2,5 mm 20

VRPA1 20

BJDL8.2 50BJDL8.3 50BJDL8.4 50BJDL8.5 50

BADLFED8.NL

VRPA1BJDL8...

BADL 9 mm 50

FED10.NL 2,5 mm 20

VRPA1 20

BJDL1.10.2 50BJDL1.10.3 50BJDL1.10.4 50BJDL1.10.5 50

BADLFED10.NL

VRPA1BJDL1.10...


center of rail


Characteristics



SolidStranded

Terminal blocksSpring clampSwitch for neutral conductor DIN 3

Busbar

Characteristics



SolidStranded

With isolated ferrule

center of rail



blue

Selection



blue

Selection

Accessories

End stop V0

End section grey V0

Separator orange


4 poles5 poles

Accessories

End stop V0

End section grey V0

Separator orange


4 poles5 poles

1SNA 399 591 R2100

1SNA 399 589 R0700

1SNA 399 903 R0200

1SNA 399 590 R0400

1SNA 399 587 R2500


1SNA 399 903 R0200

1SNA 399 592 R2200

1SNA 399 587 R2500



9.5 mm / .37"

500 600 60010 8 8

2.5 mm2 12 AWG 12 AWG

0.12 - 426-12 AWG 26-12 AWG

0.12 - 2.5

0.5 - 2.5

IEC UL CSANFC DIN

FED5.2L

BJDL5...

D 2,5/5.SNBT.2L 50D 2,5/5.SNBT.2L 50

BADL 9.0 mm 50

FED5.2L 2.5 mm 20FED5.2L 2.5 mm 20

SCD5.2L 2.5 mm 20


CBD5.2L 0.5 mm 50

SCD5.2L

CBD5.2L

D 2,5/5.SNBT.2L

FED5.4L

BJDL5...

D 2,5/5.SNBT.4L 50D 2,5/5.SNBT.4L 50D 2,5/5.SNBT.4L 50D 2,5/5.SNBT.N.4L 50

BADL 9 mm 50

FED5.4L 2.5 mm 20FED5.4L 2.5 mm 20

SCD5.4L 2.5 mm 20


SCD5.4L

D 2,5/5.SNBT.4L

BADL

BADL

9.5 mm / .37"

500 600 60010 8 8

2.5 mm2 12 AWG 12 AWG

0.12 - 426-12 AWG 26-12 AWG

0.12 - 2.5

0.5 - 2.5

IEC UL CSANFC DIN

Heavy duty switchTerminal blocks with bladeSpring clamp DIN 3

Characteristics

Wire sizemm² / AWG

Voltage VCurrent A


SolidStrandedIsolated ferrules

D 2,5/5.SNBT.2L - 2.5 mm² blocks - 5 mm .200" spacing


Standard block grey/orangeStandard block orange

Selection

End stop


Separator end section orange



Shield connector

Accessories

center of rail

D 2,5/5.SNBT.4L - 2.5 mm² blocks - 5 mm .200" spacing


Standard block greyStandard block grey/orangeStandard block orangeStandard block blue/orange

Selection

Accessories

center of rail

End stop


Separator end section orange



blad

ecl

osedbl

ade

open

blad

ecl

osedbl

ade

open

Characteristics

Wire sizemm² / AWG

Voltage VCurrent A


SolidStrandedIsolated ferrules

1SNA 290 041 R03001SNA 290 042 R0400


1SNA 399 903 R0200

1SNA 291 041 R20001SNA 291 042 R2100

1SNA 291 372 R0000


1SNA 399 903 R0200

1SNA 291 061 R24001SNA 291 062 R2500

1SNA 291 352 R0400


1SNA 291 077 R2400


9.5 mm / .37"

630 600 6006.3 8 8

2.5 mm2 12 AWG 12 AWG

0.12 - 426-12 AWG 26-12 AWG

0.12 - 2.5

0.5 - 2.5

IEC UL CSANFC DIN

D 2,5/8.SFT.2L 50D 2,5/8.SFT.2L 50

BADL 9 mm 50

FED8SF.2L 3 mm 20FED8SF.2L 3 mm 20


FED8SF.2L

BJDL8...

BADL

D 2,5/8.SFT.2L

9.5 mm / .37"

630 600 6006.3 8 8

2.5 mm2 12 AWG 12 AWG

0.12 - 426-12 AWG 26-12 AWG

0.12 - 2.5

0.5 - 2.5

IEC UL CSANFC DIN

D 2,5/8.SFLT.2L 50D 2,5/8.SFDT.2L 50D 2,5/8.SFD1T.2L 50

D 2,5/8.SNT.2L 50

BADL 9 mm 50

FED8SF.2L 3 mm 20FED8SF.2L 3 mm 20


FED8SF.2L

BJDL8...

BADL

D 2,5/8.SF...T.2L

D 2,5/8.SNT.2L

Fuse holder terminal blocks for fuses5x20 mm .197x.787 in. and 5x25 mm .197x.984 in.Spring clamp DIN 3

Characteristics

Wire sizemm² / AWG

Voltage VCurrent ARated wire size mm² / AWGWire stripping length mm / inches


D 2,5/8.SFT.2L - 2.5 mm² blocks - 8 mm .315" spacing

center of rail


Standard block greyStandard block orange

Selection

End stop



4 poles5 poles

Accessories

Characteristics

Wire sizemm² / AWG

Voltage VCurrent A



D 2,5/8.S...T.2L - 2.5 mm² blocks - 8 mm .315" spacing

center of rail


Block with test socket (1) greyBlock with test socket (2) greyBlock with test socket (3) grey

Block with test socketgrey body/blue lever

Selection

End stop



4 poles5 poles

Accessories

grip

clos

ed

grip

open

grip

clos

ed

grip

open

center of rail

grip

clos

ed

grip

open

(1) Blown fuse indicator with neon lamp 110 V - 220 V(2) Blown fuse indicator with LED 24 V(3) Blown fuse indicator with LED 48 V

1SNA 290 091 R26001SNA 290 092 R2700

1SNA 399 903 R0200

1SNA 291 131 R17001SNA 291 132 R1000


1SNA 290 093 R20001SNA 290 094 R21001SNA 290 095 R2200

1SNA 290 097 R2400

1SNA 399 903 R0200

1SNA 291 131 R17001SNA 291 132 R1000



MiniblocksSpring clamp

DIN 3 DIN 2 Base mount (snap-in or brackets)

Optimal connection capacity2.5 mm² (14 AWG) withan insulated ferrule,in 5 mm spacing.

With an overall width of 33 mm, the mini blocks offer 2 connections with a 5 mm spacing and4 connections with a 10 mm spacing.

Numerous marking options :- on the top of the blocks a marking card (up to 4 characters)- an additional marking card (up to 4 characters) on each side of the blocks, to comply with specific

requirements.

Mounting on DIN 2 rail

Mini blocks designed for interconnection :Entrelec Mini blocks all have built-in interconnection facilities, so the connection terminals arereserved for connecting conductors.

ABB Entrelec solutionConventional solution Conventional solution ABB Entrelec solution

6 terminals at the same voltage 8 terminals at the same voltage

Mounting on DIN 3 rail

DR 2,5/5.2L or DR 2,5/10.4L

Panel mounted

DIN 2 rail mounted

With flanges : DB 2,5/5.2L or DB 2,5/10.4LClip-on : DH 2,5/5.2L or DH 2,5/10.4L

* For 10 mm blocks, mount a DH blockevery 4 blocks.

* For 5 mm blocks, mount a DH blockevery 8 blocks.

DS 2,5/5.2L or DS 2,5/10.4L

DIN 3 rail mounted

Spacing :or

or

Drilling

(panel thickness : 0,6 to 1,2 mm.024" to .047")

N blocks

or

N blocks = 8 blocks max. 5 mm spacing 4 blocks max. 10 mm spacing

L = (N blocks x 5.05) + (N blocks x 10)

DIA.

or or

or or

Spacing :

DIA.

Spacing :or

L = (N blocks x 5.05) + (N blocks x 10)

Drilling

2 holes DIA. 3.2 for 3 mm screw with cylindrical head (not supplied)


9.5 mm / .37"3.5 mm / .14"

0.5 - 2.5 mm²800 V 600 V8 kV24 A 15 A

2.5 mm2/A2 12 AWG

0.12 - 4 mm²(1)26-12 AWG

0.12 - 2.5 mm²

IEC UL/CSANFC DIN

FED1.L 1.5 mm 20FED1.L 1.5 mm 20


BJDL5...

DS 2,5/5.2L 100DS 2,5/5.2L 100DS 2,5/5.N.2L 100DS 2,5/5.2L

DS 2,5/10.4L

9.5 mm / .37"3.5 mm / .14"

0.5 - 2.5 mm²800 V 600 V8 kV24 A 15 A

2.5 mm2/A2 12 AWG

0.12 - 4 mm²(1)26-12 AWG

0.12 - 2.5 mm²

IEC UL/CSANFC DIN

FED1.L 1.5 mm 20FED1.L 1.5 mm 20

BJDL10.2 24 A 50BJDL10.3 24 A 50BJDL10.4 24 A 20BJDL10.5 24 A 20BJDL10...

DS 2,5/10.4L 100DS 2,5/10.4L 100DS 2,5/10.N.4L 100

FED1.L

FED1.L

MiniblocksSpring clampSpring clamp DIN 3

Characteristics

Wire sizemm² / AWG

Voltage VPulse kVRated Current ARated wire size / Gauge mm² / AWGWire stripping length mm / inchesRecommended screwdriver mm / inches

SolidStrandedIsolated ferrule

DS 2,5/5.2L - 2.5 mm² miniblocks - 5 mm .197" spacing - 2 springs

Accessories


Selection

2 spring miniblocks greyorangeblue

(1) Spring miniblocks 5 mm spacing (DR 2,5/5.2L)comply with IEC 947-1 standard : rated wire size 1 to2,5 mm². However, these blocks can be connected to4 mm² solid wires.


Jumper bar orange V0IP 20 2 poles

3 poles4 poles5 poles10 poles

DS 2,5/10.4L - 2.5 mm² miniblocks - 10 mm .394" spacing - 4 springs

Characteristics

Wire sizemm² / AWG



Accessories


Selection





center of rail

center of rail


1SNA 291 301 R02001SNA 291 302 R0300


1SNA 291 301 R02001SNA 291 302 R0300


1SNA 290 221 R04001SNA 290 222 R05001SNA 290 223 R0600

1SNA 290 231 R06001SNA 290 232 R07001SNA 290 233 R0000


9.5 mm / .37"3.5 mm / .14"

0.5 - 2.5 mm²800 V 600 V8 kV24 A 15 A

300 A/s2.5 mm2/A2 12 AWG

0.12 - 4 mm²(1)26-12 AWG

0.12 - 2.5 mm²

IEC UL/CSANFC DIN

BJDL10...

DR 2,5/10.4L

BADRL 6,5 mm 50

FED1.L 1.5 mm 20FED1.L 1.5 mm 20



FED1.L

BJDL5...

DR 2,5/5.2L 100DR 2,5/5.2L 100DR 2,5/5.N.2L 100

DR 2,5/5.PI.2L 100

DR 2,5/10.4L 100DR 2,5/10.4L 100DR 2,5/10.N.4L 100

DR 2,5/10.PI.4L 100

DR 2,5/5.2L

BADRL

9.5 mm / .37"3.5 mm / .14"

300 A / 1 s.2.5 mm2/A2 12 AWG

0.12 - 4 mm²(1)26-12 AWG

0.12 - 2.5 mm²

IEC UL/CSANFC DIN

FED1.L 1.5 mm 20FED1.L 1.5 mm 20

DR 2,5/10.P.4L 100

FED1.L

DR 2,5/10.P.4L

Feed throughMiniblocksSpring clamp DIN 2

Characteristics

Wire sizemm² / AWG

Voltage VPulse kVRated Current AShort circuit current (DR 2,5/...PI...L) A/sRated wire size / Gauge mm² / AWGWire stripping length mm / inchesRecommended screwdriver mm / inches


DR 2,5/5.2L - 2.5 mm² miniblocks - 5 mm .197" spacing - 2 springsDR 2,5/10.4L - 2.5 mm² miniblocks - 10 mm .394" spacing - 4 springs

Accessories


Selection

center of rail

center of rail


Ground block yellow body/green marking (without rail contact)


Ground block yellow body/green marking (without rail contact)


End stop

End section V0 greyorange

Jumper bar orangeIP 20 2 poles(for DR 2,5/5.2L) 3 poles


Jumper bar orangeIP 20 2 poles(for DR 2,5/10.4L) 3 poles

4 poles5 poles

Characteristics

Wire sizemm² / AWG

Short-circuit current A / sRated wire size / Gauge mm² / AWGWire stripping length mm / inchesRecommended screwdriver mm / inches

SolidStranded

DR 2,5/10.P.4L - 2.5 mm² protection miniblock - 10 mm .394" spacing - 4 springs

Accessories


Selection

4 spring protection miniblock,green body / yellow markingconnected to the mounting rail


End section V0 greyorange

center of rail

Other mounting : DIN 3 and base mount(snap-in or brackets) : Consult us

1SNA 199 420 R2100

1SNA 291 301 R02001SNA 291 302 R0300



1SNA 291 301 R02001SNA 291 302 R0300

1SNA 290 219 R1200

1SNA 290 201 R11001SNA 290 202 R12001SNA 290 203 R1300

1SNA 290 250 R2500

1SNA 290 211 R02001SNA 290 212 R03001SNA 290 213 R0400

1SNA 290 260 R2700


9.5 mm / .37"3.5 mm / .14"

0.5 - 2.5 mm²800 V 600 V8 kV24 A 15 A

2.5 mm2/A2 12 AWG

0.12 - 4 mm²(1)26-12 AWG

0.12 - 2.5 mm²

IEC UL/CSANFC DIN

FED1.L 1.5 mm 20FED1.L 1.5 mm 20


BJDL5...

DH 2,5/5.2L 100DH 2,5/5.2L 100DH 2,5/5.N.2L 100DH 2,5/5.2L

DH 2,5/10.4L

9.5 mm / .37"3.5 mm / .14"

0.5 - 2.5 mm²800 V 600 V8 kV24 A 15 A

2.5 mm2/A2 12 AWG

0.12 - 4 mm²(1)26-12 AWG

0.12 - 2.5 mm²

IEC UL/CSANFC DIN

FED1.L 1.5 mm 20FED1.L 1.5 mm 20

BJDL10.2 24 A 50BJDL10.3 24 A 50BJDL10.4 24 A 20BJDL10.5 24 A 20BJDL10...

DH 2,5/10.4L 100DH 2,5/10.4L 100DH 2,5/10.N.4L 100

FED1.L

FED1.L

MiniblocksSpring clampBase mount with snap in mounting foot

Characteristics

Wire sizemm² / AWG



DH 2,5/5.2L - 2.5 mm² miniblocks - 5 mm .197" spacing - 2 springs

Accessories


Selection






DH 2,5/10.4L - 2.5 mm² miniblocks - 10 mm .394" spacing - 4 springs

Characteristics

Wire sizemm² / AWG



Accessories


Selection






1SNA 291 301 R02001SNA 291 302 R0300


1SNA 290 261 R14001SNA 290 262 R15001SNA 290 263 R1600

1SNA 291 301 R02001SNA 291 302 R0300


1SNA 290 271 R16001SNA 290 272 R17001SNA 290 273 R1000


9.5 mm / .37"3.5 mm / .14"

0.5 - 2.5 mm²800 V 600 V8 kV24 A 15 A

2.5 mm2/A2 12 AWG

0.12 - 4 mm²(1)26-12 AWG

0.12 - 2.5 mm²

IEC UL/CSANFC DIN

FEDB.L 1.5 mm 20FEDB.L 1.5 mm 20


FEDB.L

BJDL5...

DB 2,5/5.2L 100DB 2,5/5.2L 100DB 2,5/5.N.2L 100DB 2,5/5.2L

DB 2,5/10.4L

9.5 mm / .37"3.5 mm / .14"

0.5 - 2.5 mm²800 V 600 V8 kV24 A 15 A

2.5 mm2/A2 12 AWG

0.12 - 4 mm²(1)26-12 AWG

0.12 - 2.5 mm²

IEC UL/CSANFC DIN

FEDB.L 1.5 mm 20FEDB.L 1.5 mm 20


FEDB.L

BJDL10...

DB 2,5/10.4L 100DB 2,5/10.4L 100DB 2,5/10.N.4L 100

MiniblocksSpring clampBase mount with flanges

Characteristics

Wire sizemm² / AWG



DB 2,5/5.2L - 2.5 mm² miniblocks - 5 mm .197" spacing - 2 springs

Accessories


Selection



End section kit grey V0(right + left) orange V0



DB 2,5/10.4L - 2.5 mm² miniblocks - 10 mm .394" spacing - 4 springs

Characteristics

Wire sizemm² / AWG



Accessories


Selection


End section kit grey V0(right + left) orange V0




1SNA 290 241 R10001SNA 290 242 R11001SNA 290 243 R1200

1SNA 290 281 R01001SNA 290 282 R0200


1SNA 290 281 R01001SNA 290 282 R0200


1SNA 290 251 R12001SNA 290 252 R13001SNA 290 253 R1400


entrelec-spring-clamp-terminal-blocks

Documents