equip test probe_catalog_edition 2016 - 2017

™

2ⁿd Edition 2016 / 2017

Catalog for the Electronics Industry

ProbesTest

Equip-Test™ • [email protected] • www.equip-test.com ≡

This catalog is a general guide to the products. Buyers and users must decide themselves in regard to the suitability and safety of the products for their applications. No responsibility can be taken from the supplier´s side. We reserve right to carry out design and/or material specification changes without prior notice.

Equip-Test™ has its headquarters in the metropolitan area of Budapest Hungary in Central Europe, and is a global

player in regard to testing and measurement. Constant investments in our R&D department and internal laboratory

as well as in our extensive high-tech production and manufacturing facilities lead us to a well-known brand. Our

well-trained and loyal staff, offers full support to our customers and are the backbone of our success.

Quality Assurance

Equip-Test™ runs the business using state-of-the-art ERP and CRM solutions. Everything we do complies with the

latest quality assurance regulations of ISO9001 as well as with ISO 14001 – the so-called “GREEN” certificate. Our

company is certified annually by the DEKRA Germany.

Test Equipment

Our Test Equipment department offers complete one-stop solutions for most PCB-based electrical test-related

demands. We provide everything from all different types of spring-loaded Test Probes and Bare-board Probes

through to ICT and Special Test Fixtures and also ICT Test Systems with complete Test Application Programs. In our

test equipment products we also implement ISP (In-system Programmers), Mass-interconnect Solutions and also

other related products such as LED Check, Pneumatic side-contacting Units. Customized Cable Harnesses and

Cable Harness Test Systems are also available. Our strength lies in our ergonomically designed and functionally well

thought-through products with high value-added engineering and our extensive after-sales technical support

worldwide.

Test Probes

Test Probes provide the vital link to transfer measurement signals as true and as undistorted as possible. Therefore

these elements can be regarded as the heart of Test Fixtures - and for this very reason it is important for Equip-Test™ to offer high-performance Test Probes with best quality and value, and thus ensure maximized ROI (Return

of Investment) for our customers.

Test Probes supplied by Equip-Test™ always provide the best-possible available solution for your contacting demands.

Please send your inquiry to:

[email protected]

Our Technical Support Team will then get in touch with you soonest.

Your Equip-Test™ Support Team!

≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡

TOC

Table of Contents Table of Contents

Tabl

e of

Con

tent

s T

OC

Main Tip Styles and Applications 1

Overview - Insertion / Extraction Tools 4

Standard Test Probe Insertion / Extraction Tools 5

Special Test Probe Insertion / Extraction Tools 7

Threaded Test Probe Insertion / Extraction Tools 7

Socket / Receptacle Insertion / Extraction Tools 8

Lead-free Test ProbesLF1000 Lead-free Test Probes 9

LF1006 Lead-free Test Probes 11



LF500 Lead-free Test Probe 17




ICT / FCT Test ProbesST1000 ICT Test Probes 25

RCP066 Sockets / Receptacles for ST1000 27

Bead Probes ST1000 28

ST1001 ICT Test Probes 30

ST1006 ICT / FCT Test Probes 33




ST753 ICT /FCT Test Probes 41








Micro probesMP300 Micro Probes 57

Multi-purpose Test ProbesST510 Multi-purpose Test Probes 59

ST755 Multi-purpose Test Probes 61






RCP079 Sockets / Receptacles 73











ST1608 Multi - purpose Test Probes 95


RCP118 Sockets / Receptacles 99





Interface ProbesIT1000 Interface Probes 109

BIT1000 Banana Interface Probes 111

IT1001 Interface Probes 113

BIT1001 Banana Interface Probes 115



IT1004 Interface Probes - Mint Pin 121



Fixture CustomizingFC1000 Fixture Customizing Probes - Test Jet 127

FC1001 Fixture Customizing Probes - Polarity Check 129

FC1010 - ESD Grounding Probe 131

TestJet Parts for Keysight / Agilent 3070 fixtures 133

VTEP Parts for Keysight / Agilent 3070 fixtures 135

Open Xpress for Genrad 137

FrameScan Plus for Teradyne 138

FrameScan FX for Teradyne 140

IC Series Interface Contacts 141

Interface Contacts IC Series 142

IC & RF Series Interface Contacts 143

Marking Unit 144

PIC Pneumatic Interface Contacts 145

VPC Signal & Pneumatic Interface Modules 146

Signal Interface Blocks 147

High-current Signal & Pneumatic Interface Blocks 148

High-current ProbesHC1000 High-current Probes up to 16 A 149

HC1001 High-current Probes up to 16 A 151

HC1002 High-current Probe up to 16 A 152













Switch ProbesSW750 Switch Probes 169

SW1000 Switch Probes 171




SWO1400 Switch Probes Openers 179

NRSW1400 Non-Rotating Switch Probes 181

SWTB2560 Ball-Head Switch Probes 183

Pneumatic Test ProbesPN1000 Pneumatic Test Probes 185

PN1001 Pneumatic Test Probes 187





PA Pneumatic Accessories 197

Battery Probes

BP1000 Battery Probes 199


Sockets / Receptacles RCP066 202










Kelvin Test ProbesKP2560 Kelvin Test Probes 217

KPT2560 Kelvin Test Probes 219

Radio-frequency Test ProbesRF4004 & RFT4004 RF Test Probes 221

RF0506 & RFT0506 RF Test Probes 222










RF Receptacles / RF Test Probes Inner Plungers 232

RFI2051 Series RF Test Probes Inner Plungers 233

Cable Confection, Module Assembly 234

Custom Made RF Solutions / RF Cable Assemblies

RF9000 001 & 002 RF Test Probes 235

RF9000 003 & 004 RF Test Probes 236

Notes 237

Tabl

e of

Con

tent

s

1 2

Main Tip Styles and Applications Main Tip Styles and Applications

Technical Information Technical Information

CR

OW

N T

IP

HEX

AG

ON

AL

TIP

Mai

n Ti

p S

tyle

s an

d A

pplic

atio

ns

Mai

n Ti

p S

tyle

s an

d A

pplic

atio

ns

RA

ER

FA

CC

HB

RC

SDCA

CG

LM

EC

LH

SO

DC

4 Point Crown – For Component Pin contacting

Multi – Point Serrated Crown for wide range of applications

Agressive Tri-Sided Tip – Created for Open Vias with 3 contacting edges

90° Tri – Sided Tip – for Open Vias and Test Pads

6 Shaped Edges – Excellent for Open Vias applications

Passive 4 Sided Dagger Tip – For Plated Open Vias

Special Tip 150 ° angle - for Lead-free Open Vias and PadsPassive Tip with smooth surface – No Mark after

Test on Test Pads

Agressive Dagger Tip – Perfect for ICT, Open Vias and Testpads

Passive 90° Tip – Used to test on Open Vias and Sealing Lacque

4 Point Crown – Self Cleaning Tip for Component Pin contacting

Agressive Tri Needle Tip – Ideal solutions for contaminated PCBs

8 Blade Tip – Suitable for contaminated pin contacting

3 Points Agressive Contact – Self Cleaning contact for Lead-free Applications

Classic Passive Tip – leaves No Mark after test on Test Pads Medium Passive Tip – leaves No Mark on Test Pads

3 Finger Tip – Unwashed PCBs and contaminated Test Points – Self Cleaning

6 Blade Tip – Bead contacting and Self Cleaning design

6 Points plus 1 Middle Point – Universal Usage for test points

Plastic Cup around Serrated Crown– Designed for Component Presence Check

SG

LA

PCPA

LB

LK

Crown Lead - Free

Crown Engraver

Engraver

Lead - Free

Lead - Free

Lead - Free

Lead - Free

Hexagonal

Crown Spider

SpiderSpider

Round

Detector

Round

Flat

PeakedPeaked



LEA

D -

FR

EE

TIP

PR

ESS

ING

BIT

Technical Information

Overview Insertion / Extraction Tools

Inse

rtio

n /

Extr

acti

on T

ools

Technical Information

Tip Styles and Applications

UB

TA

UH UL

TB

UE

Passive Tip with Inverse Cone – Perfect for Wire - Wrap Posts & Connector Pins

Extremely Agressive but very stable Tip – perfect choice for contaminated PCBs

Rigid Inverse Cone – Designed for Component & Wire - Wrap Pin contacting

Unicorn – very stable Tip Style - Recommended for Copper and Solder Pads

30° Angled Medium Agressive Tip – for Test Pads 90° Conical Tip – for Plated Open Vias – No mark after test on Open Vias

Tapered

Unicorn

Unicorn

Unicorn

Unicorn

Tapered

Test Probe Hitting Accuracy depends on several things at the same time. In general it is influenced by the following factors:

1. Test Fixture Probe Plate Drilling Accuracy2. Test Fixture Guiding Accuracy3. Tolerance of Sockets / Receptacles4. Wobbling Effect of Test Probe’s Plungers

In general we can say that our Test Probes Hitting Accuracy is between 0.01 – 0.08 mm, depending on actual application, and plunger design and tip style.

There are two types of plunger designs inside of a barrel, which influences the Hitting Accuracy of Test Probes.

One is a single guided and the other is a double guided type. Double guiding gives more precise hitting accuracy.

As shown on a graphic next, Hitting Accuracy and Plunger Wobbling drawings speak for itself.

For more information, please contact us at: [email protected]

Test Probe Hitting Accuracy

Mai

n Ti

p S

tyle

s an

d A

pplic

atio

ns

3 4

Insertion - Extraction Tools for Test Probes

Insertion - Extraction Tools for Sockets / Receptacles

Handle with shaft TH1 Exchangeable bit TBP

Universal Test Probe Insertion - Extraction Complete Tool - TSP

Consists:

• Sturdy and reliable Handle TH1

• Precisely manufactured Exchangeable Bit - TBP

PRESSING BITUniversal and economic insertion solution with sturdy plastic apex suitable for various Tip Styles.*

FORKHEAD BITApplicable for insertion and extraction when Test Probe Tip Diameter is bigger than plunger shaft. Different sizes are available.*

Handle with shaft TH1 Exchangeable bit TBR

Universal Sockets / Receptacles Insertion Complete Tool - TSR

Consists:

• Sturdy and reliable Handle TH1 for insertion and Handle TH2 for extraction bits.

• Precisely manufactured Exchangeable Bit - TBR

PRESSING BITUniversal and economic insertion solution with sturdy plastic apex suitable for various Sockets / Receptacles.*

CUSTOMIZED PRESSING BITPrecisely manufactured solution with sturdy, hardened apex suitable for various Sockets / Receptacles. Different sizes are available.*

SCREW IN TYPE EXTRACTION BITPrecisely manufactured tool with sturdy, hardened cutting edges. Suitable to remove inserted Sockets / Receptacles from probe plate. Different sizes are available.*

* The above entered dimensions for the tools are only for demonstration purposes, and highlight the main dimensions. The exact dimensions may vary from series to series and with different bit types. For confirmation of exact dimensions please contact us at: [email protected]

TUBE BITApplicable for Test Probes insertion when Tip Diameter not Wider than Probe Plunger Diameter. Different sizes are available.*

Following Bit Types can be ordered:

Following Bit Types can be ordered:

Extraction Tool Handle TH2

Adapter for Extraction Bit TAR1

S

0.4

0.350.3

0.250.2

0.150.1

0.050

Test Point Hi�ng Accuracy (mm)


AC

TUA

L S

IZE

Insertion / Extraction Tools Insertion / Extraction Tools

Standard Test Probe Insertion / Extraction Tools Standard Test Probe Insertion / Extraction Tools

Inse

rtio

n /

Extr

acti

on T

ools

Inse

rtio

n /

Extr

acti

on T

ools

5 6

AC

TU

AL

SIZ

E

Probe Series

Insertion Set for Probes

Handle for

Insertion Tool

Insertion Bit for Probes


Handle for

Insertion Tool


Insertion and Extraction

Set for Probes

Handle for

Extraction Tool

Insertion and Extraction Bit

for Probes

Max. Head Diam. [mm/

inch]

LF1000 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079






LF400 TSP7500 TH1 TBP7500 / / / / / / /

LF401 TSP7500 TH1 TBP7500 / / / / / / /

ST1000 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079









ST400 TSP7500 TH1 TBP7500 / / / / / / /

ST401 TSP7500 TH1 TBP7500 / / / / / / /

MP300 TSP7500 TH1 TBP7500 / / / / / / /


ST755 TSP7500 TH1 TBP7500 / / / TSP7570 TH1 TBP7570 1.50/0.059





















IT1000 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079

BIT1000 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079

IT1001 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079

BIT1001 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079

IT1002 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079

Probe Series


Handle for

Insertion Tool



Handle for

Insertion Tool


Insertion and Extraction

Set for Probes

Handle for

Extraction Tool


for Probes

Max. Head Diam. [mm/

inch]





IT1250 TSP10000 TH1 TBP10000 / / / TSP12571 TH1 TBP12571 2.50/0.0.98

FC1000 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079



HC1000 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079

HC1001 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079














SW750 TSP7500 TH1 TBP7500 / / / TSP7570 TH1 TBP7570 1.50/0.059

SW1000 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079




SWO1400 TSP16000 TH1 TBP16000 / / / TSP14070 TH1 TBP14070 3.00/0.118

NRSW1400 TSP16000 TH1 TBP16000 TSP16035 TH1 TBP16035 TSP14070 TH1 TBP14070 3.00/0.118

PN1000 TSP10000 TH1 TBP10000 / / / / / / /

PN1001 TSP10000 TH1 TBP10000 / / / / / / /

PN1002 TSP10000 TH1 TBP10000 / / / / / / /

PN1003 TSP10000 TH1 TBP10000 / / / / / / /

PN1401 TSP16000 TH1 TBP16000 / / / / / / /

PN1402 TSP16000 TH1 TBP16000 / / / / / / /

BP1000 TSP10000 TH1 TBP10000 TSP10036 TH1 TBP10036 TSP11870 TH1 TBP11870 2.20/0.086


BP1003 TSP10000 TH1 TBP10000 / / / / / / /

BP1004 TSP10000 TH1 TBP10000 / / / / / / /



BP1601 TSP16000 TH1 TBP16000 / / / TSP16070 TH1 TBP16070 3.50/0.138



BP2601 TSP30000 TH1 TBP75000 TSP25635 TH1 TBP25635 / / / /

KP2560 TSP30000 TH1 TBP75000 / / / TSP25670 TH1 TBP25670 6.00/0.236


AC

TUA

L S

IZE

Insertion / Extraction Tools Insertion / Extraction Tools

Special & Threaded Test Probe Insertion / Extraction Tools Socket / Receptacle ▪ Insertion / Extraction Tools

Inse

rtio

n /

Extr

acti

on T

ools

Inse

rtio

n /

Extr

acti

on T

ools

7 8

Special Test Probe Insertion / Extraction Tools Socket / Receptacle ▪ Insertion / Extraction Tools

Threaded Test Probe Insertion / Extraction Tools

AC

TU

AL

SIZ

E

Probe Series Insertion Set for Probes

Handle for Insertion

Tool


Insertion and Extraction Set for

Probes

Handle for

Extraction Tool


for Probes

Max. Head Diam. [mm/inch]

ST1000 CG09 TSP10000 TH1 TBP10000 TSP10071 TH1 TBP10071 3.00/0.118


ST1000 DC94 TSP10000 TH1 TBP10000 TSP10071 TH1 TBP10071 3.00/0.118

ST1001 DC93 TSP10000 TH1 TBP10000 TSP10071 TH1 TBP10071 3.00/0.118

ST1020 N CG58 TSP10000 TH1 TBP10000 TSP10071 TH1 TBP10071 3.00/0.118

ST1013 R CG58 TSP10000 TH1 TBP10000 TSP12570 TH1 TBP12570 2.50/0.098

ST1013 FA05 TSP10000 TH1 TBP10000 TSP12570 TH1 TBP12570 2.50/0.098

ST1013 TA07 TSP10000 TH1 TBP10000 TSP12570 TH1 TBP12570 2.50/0.098





ST1019 ER58 TSP10000 TH1 TBP10000 TSP12570 TH1 TBP12570 2.50/0.098



ST1609 TA56 TSP16000 TH1 TBP16000 TSP18770 TH1 TBP18770 4.00/0.157

ST1609 R UB53 TSP16000 TH1 TBP16000 TSP18770 TH1 TBP18770 4.00/0.157


ST1615 FA85 TSP30000 TH1 TBP75000 TSP16071 TH1 TBP16071 6.50/0.256


HC1000 CG07 TSP10000 TH1 TBP10000 TSP10071 TH1 TBP10071 3.00/0.118





SW1400 IW96 TSP30000 TH1 TBP75000 TSP16071 TH1 TBP16071 6.50/0.256

SWO1400 IW94 TSP16000 TH1 TBP16000 TSP16071 TH1 TBP16071 6.50/0.256

SWO1400 IW95 TSP30000 TH1 TBP75000 TSP16071 TH1 TBP16071 6.50/0.256

NRSW1400 WD 53 TSP16000 TH1 TBP16000 TSP16071 TH1 TBP16071 6.50/0.256

BP1000 EP03 TSP16000 TH1 TBP16000 TSP10072 TH1 TBP10072 4.00/0.157

BP1000 EP04 TSP16000 TH1 TBP16000 TSP10072 TH1 TBP10072 4.00/0.157

BP1000 EQ03 TSP16000 TH1 TBP16000 TSP10072 TH1 TBP10072 4.00/0.157

Series Insertion Bit for Probes Insertion and Extraction Bit for Probes

SWTB2560 / / TBT30070

KPT2560 / / TBT25670

Receptacle Series

Insertion Set for Receptacle

Handle for Insertion

Tool

Insertion Bit for Receptacle

Extraction Set for Receptacle

Handle for Extraction

Tool

Adapter for Extraction Bit

Extraction Bit for Receptacle

RCP066 TSR10035 TH1 TBR10035 TSR10070 TH2 TAR1 TBR10070




RCP021 TSR3035 TH1 TBR3035 / / / /









RCT256 TSR30035 TH1 TBR30035 TSR30070 TH2 TAR1 TBR30070



RCP065U TSR10035 TH1 TBR10035 TSR10070 TH2 TAR1 TBR10070






9 10

Tip StylePlunger Material

Tip Diameter

Code

Tip Diameter

mm [inches]

ER 5 6 /SP170/+ 1.70 0.067

LA 5 3 0.91 0.036

LC 5 3 0.91 0.036

LF 5 3 0.91 0.036

UH 5 4 0.91 0.036

LF10

00

AC

TU

AL

SIZ

E

Lead

-fre

e ▪ I

CT ▪ 1

00 M

il /

2.54

mm

LF1000 Lead-free Test Probes Tip Styles LF1000LF

1000

LF1000 series Lead-free Test Probes are the ideal choice for contacting problems caused by Lead-free type solder materials. With the special tip styles and combined with a higher pre-load force, this series offers an ideal solution to those test challenges related to Lead-free solder alloys

Spring Force at Working Stroke (2/3)

Code Rated force

(N) [oz]

M 2.00 7.2

L 3.00 10.8

Technical Specifications

Recommended Working Stroke: 4.30 mm [0.169]

Full Stroke: 6.35 mm [0.250]

Max. Current: 3 - 8 A (continuous)

Average Resistance: max. 20 mΩ

Barrel Material: Beryllium Copper / Nickel Silver

Spring Material: Spring Steel Gold Plated

Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]

Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆

Plunger Plating

Code Material

No letter Hard Gold

≡ Tip Diameter Code changes according to the Tip Style.

Plunger Material

Code Material

5 Steel

AC

TUA

L S

IZE

Lead

-fre

e ▪ I

CT ▪ 1

00 M

il /

2.54

mm

Recommended Socket / Receptacle Series for Lead-free Test Probes LF1000 is RCP066. See Page 27 - 29 for detailed information.

Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm

≡ Test Probes Ordering Code Example ≡ Special Tip Diameter Probes Ordering Code Example

LF1000 N LA 5 3 Ma b c d e f g

LF1000 N ER 5 6 M SP170a b c d e f g

a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]

By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.

Installation Heights with different Sockets / Receptacles

Installation Height varies of a type of Socket / Receptacle that is being used!

≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating

RCP066 N WR03x y z

Code Material

No letter Hard Gold*

x: Series • y: Socket / Receptacle Plating • z: Option

By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.

∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]

+ Special Tip Diameter Code

For detailed Sockets / Receptacles for LF1000 See Page 27 - 29.

Tool for LF1000 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s)

- has to be chosen*

Handle TH1

Universal Pressing BitTBP10000

Insertion BitTBP10035

Insertion & Extraction Bit

TBP10070

*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.

Tool for RCP066 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)

- has to be chosen*

Handle TH1


Customized Pressing BitTBR10035

Extraction BitTBR10070


≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡11 12

LF10

06

Lead

-fre

e ▪ I

CT

- FC

T ▪ 1

00 M

il /

2.54

mm

LF10

06

Lead

-fre

e ▪ I

CT

- FC

T ▪ 1

00 M

il /

2.54

mm

LF1006 Lead-free Test Probes Tip Styles LF1006


AC

TU

AL

SIZ

E

Series LF1006 is a long-stroke version of Lead-free Test Probes series LF1000. Therefore this probe is an excellent choice for usage in so-called „dual-stage” (i.e. combined ICT and FCT test) Fixtures. Despite the longer stroke the Probe still offers precise hitting accuracy and long-life expectancy.










Recommended Socket / Receptacle Series for ICT Test Probes LF1006 is RCP066.

See Page 27 - 29 for detailed information.

≡ Test Probes Ordering Code Example

LF1006 N LA 5 3 Na b c d e f g




AC

TUA

L S

IZE


Tip Diameter

Code

Tip Diameter

mm [inches]

CC

5 3 0.50 0.020

5 7 1.30 0.051

5 8 1.50 0.059

CG0 3 1.30 0.051

0 4 1.50 0.059

ER 0 3 1.50 0.059

LA 5 3 0.91 0.036

SG 5 2 1.30 0.051

TA 0 3 1.30 0.051


Installation Height


RCP066 N WR03x y z

Code Material





Installation Height is determined by drill hole depth of Socket / Receptacle that is used!


Code Rated force

(N) [oz]

M 2.00 7.2

L 3.00 10.8 Plunger Plating

Code Material

No letter Hard Gold

Plunger Material

Code Material

0 BeCu

5 Steel


- has to be chosen*

Handle TH1




TBP10070


*Due to high-preloaded springs the life expectancy of these probes are less, then for standard LF series.


- has to be chosen*





Handle TH1


LF75

0

AC

TU

AL

SIZ

E

AC

TUA

L S

IZE

Lead

-fre

e ▪ I

CT ▪ 7

5 M

il /

1.91

mm

Lead

-fre

e ▪ I

CT ▪ 7

5 M

il /

1.91

mm

LF75

0

LF750 series Lead-free Test Probes are the ideal choice for contacting problems caused by Lead-free type solder materials. With the special tip styles and combined with a higher pre-load force, this series offers an ideal solution to those test challenges related to Lead-free solder alloys.





Average Resistance: ≤ 20 mΩ






Code Rated force

(N) [oz]

N 2.00 7.2

NX 2.80 10.1


Tip Diameter

Code

Diameter

mm [inches]

CC 5 4 0.67 0.026

LA 5 4 0.67 0.026

LC 5 4 0.67 0.026

LF 5 4 0.67 0.026

UH 5 4 0.67 0.026






By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if diffferent.

Plunger Material

Code Material

5 Steel

Plunger Plating

Code Material

No letter Hard Gold






RCP052 N WR05x y z

Code Material







- has to be chosen*

Handle TH1




TBP7570



- has to be chosen*





Handle TH1


LF75

3

Lead

-fre

e ▪ I

CT

- FC

T ▪ 7

5 M

il /

1.91

mm

LF75

3

Lead

-fre

e ▪ I

CT

- FC

T ▪

75 M

il /

1.91

mm



AC

TU

AL

SIZ

E














Recommended Socket / Receptacle Series for ICT / FCT Test Probes LF753 is RCP052. See Page 37 - 38 for detailed information.

AC

TUA

L S

IZE


Tip Diameter

Code

Diameter

mm [inches]

LA 5 3 0.67 0.026




RCP052 N WR05x y z

Code Material




Installation Height varies of a type of Socket / Receptacle that is being used!∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected] For detailed Sockets / Receptacles for LF753 See Page 37 - 38.

*Other Tip Styles available on request.


Code Rated force

(N) [oz]

N 2.00 7.2

NX 2.80 10.1

Plunger Material

Code Material

5 Steel

Plunger Plating

Code Material

No letter Hard Gold


- has to be chosen*

Handle TH1

Series LF753 is a long-stroke version of Lead-free Test Probes series LF750. Therefore this probe is an excellent choice for usage in so-called „dual-stage” (i.e. combined ICT and FCT test) Fixtures. Despite the longer stroke the Probe still offers precise hitting accuracy and long-life expectancy.




TBP7570




- has to be chosen*





Handle TH1


LF50

0

Tip Style NamePlunger Material

Tip Diameter

Code

Diameter in

mm [inches]

CC 5 3 0.50 0.020

ER 5 4 0.90 0.035

LA 5 3 0.50 0.020

LC 5 4 0.50 0.020

LF 5 4 0.50 0.020

AC

TUA

L S

IZE

AC

TU

AL

SIZ

E

Lead

-fre

e ▪ I

CT ▪ 5

0 M

il /

1.27

mm

Lead

-fre

e ▪ I

CT ▪ 5

0 M

il /

1.27

mm











Plunger Material

Code Material

5 Steel

Plunger Plating

Code Material

No letter Hard Gold





LF50

0 LF500 Lead-free Test Probes Tip Styles LF500






Tool for RCP037 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s) -

has to be chosen*

Handle TH1







Code Rated force

(N) [oz]

N 2.00 7.2

For detailed Sockets / Receptacles for LF500 See Page 49 - 50.Tool for LF500 Series Test Probes Contains:

Tool Handle + Exchangeable Bit(s) - has to be chosen*

Handle TH1




TBP5070


≡ Socket / Receptacle Ordering Code Example

RCP037 N SR03x y z



≡ Pre Wired (VR) Socket / Receptacle Ordering Code Example

RCP037 VR03 3 0 35x y z w1 w2 w3


• w1: Wire Diameter • w2: Colour • w3: Length

w3: Wire Length

Wire length is given in inches.

Conversion Example: 35 in = approx. 900 mm

*Other length and colors available on request.

w2: Wire Colour

0 Black

w1: Wire Diameter Code

AWG mm [inches]

3 30 0.26 0.010


AC

TU

AL

SIZ

E

Lead

-fre

e ▪ I

CT

- FC

T ▪ 5

0 M

il /

1.27

mm

Series LF501 is a long-stroke version of Lead-free Test Probe series ST500. Therefore this probe is an excellent choice for usage in so-called „dual-stage” (i.e. combined ICT and FCT test) Fixtures. Despite the longer stroke the Probe still offers precise hitting accuracy and long-life expectancy.











LF501 N LA 5 3 La b c d e f g



LF50

1 LF501 Lead-free Test Probes

Centers 50 Mil / 1.27 mm

LF50

1 A

CTU

AL

SIZ

E

Lead

-fre

e ▪ I

CT

- FC

T ▪ 5

0 M

il /

1.27

mm



Tip Diameter

Code

Diameter

mm [inches]

LA 5 3 0.50 0.020

LF 5 3 0.50 0.020

Tip Styles LF501


Recommended Socket / Receptacle Series for ICT Test Probes LF501 is RCP037.





- has to be chosen*

Handle TH1





For detailed Sockets / Receptacles for ST500 See Page 49 - 50.



Plunger Material

Code Material

5 Steel

Plunger Plating

Code Material

No letter Hard Gold


Code Rated force

(N) [oz]

N 2.00 7.2


- has to be chosen*

Handle TH1




TBP5070



RCP037 N SR03x y z




RCP037 VR03 3 0 35x y z w1 w2 w3



w3: Wire Length



* Other length and colors available on request.

w2: Wire Colour

0 Black


AWG mm [inches]

3 30 0.26 0.010



LF40

0

AC

TU

AL

SIZ

E

AC

TUA

L S

IZE

Lead

-fre

e ▪ I

CT ▪ 4

0 M

il /

1.00

mm

Lead

-fre

e ▪ I

CT ▪ 4

0 M

il /

1.00

mm

LF40

0












Code Rated force

(N) [oz]

L 2.00 7.2


Tip Diameter

Code

Diameter

mm [inches]

CC 5 3 0.41 0.016

LA 5 3 0.41 0.016

LB 5 3 0.41 0.016

LF 5 3 0.41 0.016

LG 5 3 0.41 0.016




LF400 N LA 5 3 La b c d e f



Plunger Material

Code Material

5 Steel

Plunger Plating

Code Material

No letter Hard Gold

Recommended Socket / Receptacle Series for Lead-free Test Probes LF400 is RCP030.

See Page 55 - 56 - 56 for detailed information.







- has to be chosen*

Handle TH1




RCP030 VR04 3 0 35x y z w1 w2 w3




RCP030 N CR03x y z



w3: Wire Length




w2: Wire Colour

0 Black


AWG mm [inches]

3 30 0.26 0.010


- has to be chosen*

Handle TH1






LF40

1

AC

TU

AL

SIZ

E

Lead

-fre

e ▪ I

CT

- FC

T▪ 4

0 M

il /

1.00

mm

LF401 series is a long-stroke version of Lead-free Test Probe series LF400. Ideal choice for contacting problems caused by Lead-free type solder materials. With the special tip styles and combined with a higher pre-load force, this series offers an ideal solution to those test challenges related to Lead-free solder alloys.




Max. Current: 2 A (continuous)






AC

TUA

L S

IZE

Lead

-fre

e ▪ I

CT

- FC

T 40

Mil

/ 1.

00 m

m

LF40

1

Recommended Socket / Receptacle Series for ICT / FCT Test Probes LF401 is RCP030. See Page 55 - 56 for detailed information.

Plunger Plating

Code Material

No letter Hard Gold

Plunger Material

Code Material

5 Steel


LF401 N LA 5 3 La b c d e f g



1

LF401 Lead-free Test Probes


Tip Styles LF401



Installation Height with different Sockets / Receptacles





Code Rated force

(N) [oz]

L 2.00 7.2


- has to be chosen*

Handle TH1




Tip Diameter

Code

Diameter

mm [inches]

LF 5 3 0.41 0.016



RCP030 VR04 3 0 35x y z w1 w2 w3




RCP030 N CR03x y z



w3: Wire Length




w2: Wire Colour

0 Black


AWG mm [inches]

3 30 0.26 0.010



- has to be chosen*

Handle TH1






ST1

000

2625

AC

TU

AL

SIZ

E

ICT ▪ 1

00 M

il /

2.54

mm

ST1000 ICT Test Probes Tip Styles ST1000S

T100

0

These Spring-loaded Test Probes are typically used in ICT Test Fixtures. They have high hitting accuracy and long-life expectancy, and are therefore the best solution for high-quality testing results.

Spring Force at Working Stroke (2/3)Code Rated force

(N) [oz]

S 1.00 3.6

M 1.50 5.4

N 2.00 7.2

NX 2.20 7.9

LX 3.00 10.8

X 4.00 14.4









Note: Probe Tips assembled with Plastic parts may differ!


Plunger PlatingCode Material

No letter Hard Gold


Plunger MaterialCode Material

0 BeCu

5 Steel

9 Plastic

AC

TUA

L S

IZE

ICT ▪ 1

00 M

il /

2.54

mm

Recommended Socket / Receptacle Series for ICT Test Probes ST1000 is RCP066.



Tool for ST1000 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*

Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit

Universal Tip Diameter not Wider than Probe Plunger

Tip Diameter Wider than Probe Plunger

TH1 TBP10000 TBP10035 TBP10070



RCP066 N WR03x y z

Code Material






Tip Diameter

Code

Tip Diameter

mm [inches]

CA5 6 1.30 0.051

5 7 1.50 0.059

CB 5 4 1.06 0.042

CC

5 4 0.50 0.020

5 5 0.80 0.031

5 8 1.30 0.051

5 9 1.50 0.059

CG

0 5 1.30 0.051

0 6 1.50 0.059

0 8 2.00 0.079

0 8 /SP229/+ 2.29 0.090

0 9 2.50 0.098

0 10 3.00 0.118

DC 9 4 2.25 0.089

EC 5 3 0.91 0.036

ER 0 5 1.50 0.059

FA 0 6 1.50 0.059

≡ Bead Probe - More data on Page 30

HK 5 5 1.70 0.067

LA5 3 0.91 0.036

5 5 1.30 0.051

LB 5 3 0.91 0.036


Tip Diameter

Code

Tip Diameter

mm [inches]

LC 5 3 0.91 0.036

LF 5 3 0.91 0.036

PA 5 3 1.60 0.063

PC 5 3 1.50 0.059

RA

0 4 0.64 0.025

0 5 0.91 0.036

0 7 1.30 0.051

RC 0 3 0.91 0.036

SD5 5 1.30 0.051

5 7 1.50 0.059

SG 5 4 1.50 0.059

TA 0 4 1.50 0.059

TB 0 4 1.80 0.071

UB 5 3 0.91 0.036

UH 5 3 0.91 0.036

≡ Test Probes Ordering Code Example ≡ Special Tip Diameter Probes Ordering Code Example

ST1000 N LA 5 3 Na b c d e f g

ST1000 N CG 0 8 S SP229a b c d e f g



+ Special Tip Diameter Code

Not available standard insertion / extraction tool for this tip size in default grid.

Please See Page 7 for list of Special Tools.

RC

P06

6S

ocke

ts /

Rec

epta

cles

▪ 10

0 M

il /

2.54

mm

27

Sockets / Receptacles for ST1000 RCP066RCP066 Sockets / Receptacles for ST1000

AC

TU

AL

SIZ

E

RC

P06

6S

ocke

ts /

Rec

epta

cles

▪ 10

0 M

il /

2.54

mm

28

AC

TUA

L S

IZE



RCP066 N WR03x y z

Code Material






Design Code Description

WR Wire-Wrap Square Post

SR Solderable

Usage of Sockets / Receptacles

Usually Test Probes are used in Sockets / Receptacles. This enables a quick and convenient exchange of worn-out Test Probes without having to disconnect the wire connections in a Test Fixture.




Round & Square Post: Brass / Phosphor Bronze


RCP066 WR03

Installation Height• Fixed: 16.00 mm [0.630]

• Variable: variable

• Feature: press - ring

vacuum sealed

Plating: Hard Gold

RCP066 WR08




vacuum sealed

Plating: Hard Gold

RCP066 WR11




vacuum sealed

Plating: Hard Gold

RCP066 WR13




vacuum sealed

Plating: Hard Gold

RCP066 WL09




vacuum sealed

Plating: Hard Gold

RCP066 WR14




Plating: Hard Gold

Type Information and Installation Height Data with inserted Test Probes ST1000*


Compatible Series for RCP066:

LF1000

LF1006

ST1000

ST1000 Bead

ST1001

ST1006

IT1003 (WR13)

IT1004 (WR13)

FC1001 (WR13)

*for wireless connection

RC

P06

6A

CT

UA

L S

IZE

29

RCP066 SR07




Plating: Hard Gold

RCP066 SR08




Plating: Hard Gold

RCP066 SR10




Plating: Hard Gold

30


RCP066 Sockets / Receptacles for ST1000 Bead Probes ST1000

ST1

000

AC

TUA

L S

IZE

Bea

d P

robe

s ▪ 1

00 M

il /

2.54

mm

Recommended Socket / Receptacle Series for Bead Probes ST1000 is RCP066. See Page 27 - 29 for detailed information.

These Spring-loaded Test Probes are typically used in ICT Test Fixtures for PCBs that have been manufactured with the bead probe technology (i.e. the application of small solder beads on the conductor line surfaces and for micro-vias.


ST1000 N FA 0 6 Na b c d e f g

a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter



Code Rated force (N)

M 1.50

N 2.00

LX 3.00



Full Stroke: 6.35 mm [.250]




Plunger Plating

Code Material

No letter Hard Gold

Plunger Material

Code Material

0 BeCu

Tool for RCP066 Sockets / Receptacles Contains Tool Handle + Exchangeable Bit(s) - has to be chosen*

Tool Handle w. shaft Insertion Bits Extraction Bit

Universal Pressing Bit Customized Pressing Bit

TH1 TBP10000 TBR10035 TBR10070





RCP066 N SR07x y z

Code Material




Soc

kets

/ R

ecep

tacl

es ▪

100

Mil

/ 2.

54 m

m


Tip Diameter

Code

Tip Diameter

mm [inches]

FA 0 6 1.50 0.059




ST1

001

AC

TU

AL

SIZ

E

ICT ▪ 1

00 M

il /

2.54

mm

ST1

001

The series ST1001 is an extended version of the Test Probes series ST1000, and are therefore also typically used in ICT Test Fixtures. They have high hitting accuracy and long-life expectancy, and are therefore the best solution for high-quality testing results.


Code Rated force

(N) [oz]

M 1.50 5.4

N 2.00 7.2

LX 3.00 10.8









Note: Probe Tips assembled with Plastic parts may differ!


Plunger Material

Code Material

0 BeCu

5 Steel

9 Plastic

Plunger Plating

Code Material

No letter Hard Gold

AC

TUA

L S

IZE

ICT ▪ 1

00 M

il /

2.54

mm




Tip Diameter

Code

Tip Diameter

mm [inches]

CA 5 4 1.30 0.051

CC5 3 0.50 0.020

5 7 1.30 0.051

CG0 5 1.50 0.059

0 6 2.00 0.079

DC 9 3 2.25 0.089


Tip Diameter

Code

Tip Diameter

mm [inches]

ER5 4 1.50 0.059

0 5 1.70 0.067

LA 5 3 0.90 0.035

SG 5 3 1.50 0.059

TA 0 3 1.50 0.059

ST1001 ICT Test Probes Tip Styles ST1001



ST1001 N CG 0 5 Ma b c d e f g










TH1 TBP10000 TBP10035 TBP10070



RCP066 N WR03x y z

Code Material








≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡ 3433

AC

TU

AL

SIZ

E

ICT

/ FC

T ▪ 1

00 M

il /

2.54

mm

ST1

006

Series ST1006 is a long-stroke version of Test Probe series ST1000. Therefore this probe is an excellent choice for usage in so-called „dual-stage” (i.e. combined ICT and FCT test) Fixtures. Despite the longer stroke the Probe still offers precise hitting accuracy and long-life expectancy.










Plunger Material

Code Material

0 BeCu

5 Steel

Plunger Plating

Code Material

No letter Hard GoldRecommended Socket / Receptacle Series for

ICT Test Probes ST1006 is RCP066.See Page 27 - 29 for detailed information.

ST1006 ICT / FCT Test Probes






ST1

006


AC

TUA

L S

IZE

ICT

/ FC

T ▪ 1

00 M

il /

2.54

mm


Tip Diameter

Code

Tip Diameter

mm [inches]

CC

5 3 0.50 0.020

5 7 1.30 0.051

5 8 1.50 0.059

CG0 3 1.30 0.051

0 4 1.50 0.059

ER 0 3 1.50 0.059

LA 5 3 0.91 0.036

SG 5 2 1.30 0.051

TA 0 3 1.30 0.051

Tip Styles ST1006



Installation Height





TH1 TBP10000 TBP10035 TBP10070



Code Rated force

(N) [oz]

M 1.50 5.4

N 2.00 7.2

LX 3.00 10.8


RCP066 N WR03x y z

Code Material




RCP066 WR03




vaccuum sealed

Plating: Hard Gold




ST7

50

AC

TU

AL

SIZ

E

ICT ▪ 7

5 M

il /

1.91

mm

ICT ▪ 7

5 M

il /

1.91

mm

ST7

50

These Spring-loaded Test Probes are typically used in ICT Test Fixtures. They have high pointing accuracy and long-life expectancy.











Code Rated force

(N) [oz]

US 0.60 2.2

S 1.00 3.6

M 1.50 5.4

N 2.00 7.2

X 2.80 10.1


Tip Diameter

Code

Diameter

mm [inches]

CA 5 8 1.15 0.045

CB 5 5 1.00 0.039

CC5 4 0.50 0.020

5 5 0.64 0.025

EC 5 3 0.64 0.025

ER 5 3 0.64 0.025

HK 5 3 1.20 0.047

LA 5 3 0.64 0.025


Tip Diameter

Code

Diameter

mm [inches]

LB 5 3 0.64 0.025

LC 5 3 0.64 0.025

RA 0 4 0.64 0.025

SG 5 3 1.20 0.047

TA 0 5 1.20 0.047

UB 5 3 0.64 0.025

UH 5 3 0.64 0.025




ST750 N CB 5 5 Na b c d e f g



Plunger Material

Code Material

0 BeCu

5 Steel

Plunger Plating

Code Material

No letter Hard Gold








TH1 TBP7500 TBP7535 TBP7570



RCP052 N WR05x y z

Code Material




Tool for RCP052 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*



TH1 TBP7500 TBR7535 TBR7570


AC

TUA

L S

IZE



RC

P05

2

AC

TU

AL

SIZ

E

AC

TUA

L S

IZE

Centers 75 Mil / 1.91 mmCenters 75 Mil / 1.91 mm

Soc

kets

/ R

ecep

tacl

es ▪

75 M

il /

1.91

mm

RC

P05

2S

ocke

ts /

Rec

epta

cles

▪ 75

Mil

/ 1.

91 m

m

Sockets / Receptacles for ST750 RCP052RCP052 Sockets / Receptacles for ST750


RCP052 N WR05x y z

Code Material




Usage of Sockets/Receptacles


RCP052 WR05




vacuum sealedPlating: Hard Gold

RCP052 WR09










RCP052 SR03




Plating: Hard Gold

RCP052 WR10







SR Solderable



Tool for RCP052 Sockets / Receptacles Contains Tool Handle + Exchangeable Bit(s)*





RCP052 SR06




Plating: Hard Gold

RCP052 WL03




Plating: Hard Gold∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]


LF750

LF753

ST750

ST751

ST753

ST754



ST7

51

AC

TU

AL

SIZ

E

ICT ▪ 7

5 M

il /

1.91

mm

ST7

51

The series ST751 is a longer version of the Test Probes series ST750, and are typically used in ICT Test Fixtures. They have high pointing accuracy and long-life expectancy.


Code Rated force

(N) [oz]

S 1.00 3.6

M 1.50 5.4

N 2.00 7.2

X 2.80 10.1


AC

TUA

L S

IZE

ICT ▪ 7

5 M

il /

1.91

mm


Tip Diameter

Code

Diameter

mm [inches]

1LA 5 3 0.64 0.025

UB 5 3 0.64 0.025










Plunger Material

Code Material

5 Steel

Plunger Plating

Code Material

No letter Hard Gold



Recommended Socket / Receptacle Series for ICT Probe ST751 is RCP052.



ST751 N 1LA 5 3 Na b c d e f g












RCP052 N WR05x y z

Code Material








AC

TU

AL

SIZ

E

ICT

/ FC

T ▪ 7

5 M

il /

1.91

mm

ST7

53

Series ST753 is a long-stroke version of Test Probe series ST750. Therefore this probe is an excellent choice for usage in so-called „dual-stage” (i.e. combined ICT and FCT test) Fix-tures. Despite the longer stroke the Probe still offers precise hitting accuracy and long-life expectancy.











Code Rated force

(N) [oz]

N 1.2 4.3

ST753 ICT /FCT Test Probes






Plunger Material

Code Material

5 Steel

Plunger Plating

Code Material

No letter Hard Gold

Recommended Socket / Receptacle Series for ICT / FCT Test Probes ST753 is RCP052. See Page 37 - 38 for detailed information.

ST7

53

AC

TUA

L S

IZE

ICT

/ FC

T ▪ 7

5 M

il /

1.91

mm


Tip Diameter

Code

Diameter

mm [inches]

LA 5 3 0.67 0.026


Tip Styles ST753










RCP052 N WR05x y z

Code Material









AC

TU

AL

SIZ

E

ICT

/ FC

T ▪ 7

5 M

il /

1.91

mm

ST7

54

The series ST754 is long-stroke version of the Test Probe series ST750. These Spring-loaded Test Probes are typically used in ICT Test Fixtures. They have high pointing accuracy and long-life expectancy.


Recommended Working Stroke: 8 mm [0.314]

Full Stroke: 10 mm [0.393]













Plunger Material

Code Material

5 Steel

Plunger Plating

Code Material


ICT / FCT Test Probes ST754 is RCP052. See Page 37 - 38 for detailed information.

ST7

54

ICT

/ FC

T ▪ 7

5 M

il /

1.91

mm


Tip Styles ST754



Tip Diameter

Code

Diameter

mm [inches]

LA 5 3 0.64 0.025

AC

TUA

L S

IZE









Code Rated force

(N) [oz]

N 1.2 4.3


RCP052 N WR05x y z

Code Material








45 46≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡

ST5

00

AC

TUA

L S

IZE

AC

TU

AL

SIZ

E

ICT ▪ 5

0 M

il /

1.27

mm

ICT ▪ 5

0 M

il /

1.27

mm

These spring-loaded Test Probes are typically used in ICT Test Fixtures. They have high pointing accuracy and long-life expectancy.











Code Rated force

(N) [oz]

S 1.00 3.6

M 1.50 5.4

L 2.00 7.2

Plunger Material

Code Material

0 BeCu

5 Steel

Plunger Plating

Code Material

No letter Hard Gold





ST5

00












Tip Style NamePlunger Material

Tip Diameter

Code

Diameter in

mm [inches]

CC 5 3 0.50 0.020

CG 0 4 0.90 0.035

LA 5 3 0.50 0.020

LB 5 3 0.50 0.020



- has to be chosen*

Handle TH1






RCP037 N SR03x y z



Installation Heights with differentSockets / Receptacles

Installation Height varies of a type of Receptacle / Socket that is being used!



RCP037 VR03 3 0 35x y z w1 w2 w3



w3: Wire Length



Other length and colors available on request.

w2: Wire Colour

0 Black


AWG mm [inches]

3 30 0.26 0.010


AC

TU

AL

SIZ

E

ICT

/ FC

T ▪ 5

0 M

il /

1.27

mm












Code Rated force

(N) [oz]

S 1.00 3.6

M 1.50 5.4

L 2.00 7.2

Plunger Material

Code Material

5 Steel

Plunger Plating

Code Material

No letter Hard Gold


ST501 N LA 5 3 La b c d e f g



ST5

01



ST5

01

AC

TUA

L S

IZE

ICT

/ FC

T ▪ 5

0 M

il /

1.27

mm



Tip Diameter

Code

Diameter

mm [inches]

LA 5 3 0.50 0.020

Tip Styles ST501













- has to be chosen*

Handle TH1


RCP037 N SR03x y z




RCP037 VR03 3 0 35x y z w1 w2 w3










w3: Wire Length




w2: Wire Colour

0 Black


AWG mm [inches]

3 30 0.26 0.010


RC

P03

7

Soc

kets

/ R

ecep

tacl

es ▪

50 M

il /

1.27

mm

49

Soc

kets

/ R

ecep

tacl

es ▪

50 M

il /

1.27

mm

AC

TU

AL

SIZ

E

AC

TUA

L S

IZE

Design Code Options

WR Wire Wrap Square Post

VR Pre-wired with Kynar Wire

CR Crimp

SR Solderable








RC

P03

7 RCP037 Sockets / Receptacles for ST500 Sockets / Receptacles for ST500 RCP037


RCP037 CR03




Plating: Hard Gold

RCP037 CR04




Plating: Hard Gold

RCP037 SR03




Plating: Hard Gold



RCP037 N SR03x y z

RCP037 WR03x y z

x: Series • y: Socket / Receptacle Plating • z: Option x: Series • y: Socket / Receptacle Plating • z: Option




LF500 LF501 ST500 ST501

RCP037 VR03 3035



• Feature: press - ring vacuum sealed

Plating: Hard Gold

RCP037 WR03




Plating: Nickel Plated

RCP037 WL13




Plating: Nickel Plated


- has to be chosen*

Handle TH1

w3: Wire Length




RCP037 VR03 3 0 35x y z w1 w2 w3







Available also in double press-ring version, which offers very high stability and better

pointing accuracy.


w2: Wire Colour

0 Black


AWG mm [inches]

3 30 0.26 0.010



ST4

00

AC

TU

AL

SIZ

E

ICT ▪ 4

0 M

il /

1.00

mm

These Spring-loaded Test Probes are typically used in ICT Test Fixtures. They have high pointing accuracy and long-life expectancy.


Code Rated force

(N) [oz]

XS 0.80 2.9










Plunger Plating

Code Material

No letter Hard Gold


Plunger Material

Code Material

0 BeCu

5 Steel

AC

TUA

L S

IZE

ICT ▪ 4

0 M

il /

1.00

mm


Tip Diameter

Code

Diameter

mm [inches]

CA 0 3 0.40 0.016

LA 5 3 0.40 0.016

LB 5 3 0.40 0.016

LC 5 3 0.40 0.016

RA 0 3 0.40 0.016


ST400 N LA 5 3 XSa b c d e f g





ST400 ICT Test Probes


Tip Styles ST400

Centers 40 Mil / 1.00 mmS

T400


RCP030 N CR03x y z




RCP030 N VR04 3 0 35x y z w1 w2 w3


• w1: Wire Diameter • w2: Colour • w3: Length* If letter X is in any place instead of digit means no information

about the wire length / diameter / colour is provided.





- -

TH1 TBP7500 - -






- has to be chosen*

Handle TH1







ST4

01

AC

TU

AL

SIZ

E

ICT

/ FC

T ▪ 4

0 M

il /

1.00

mm











AC

TUA

L S

IZE

ICT

/ FC

T ▪ 4

0 M

il /

1.00

mm


Tip Diameter

Code

Diameter

mm [inches]

LA 5 3 0.40 0.016


ST4

01

Recommended Socket / Receptacle Series for ICT / FCT Test Probes ST401 is RCP030. See Page 55 - 56 for detailed information.


Code Rated force

(N) [oz]

XS 0.80 2.9

Plunger Plating

Code Material

No letter Hard Gold

Plunger Material

Code Material

5 Steel


ST401 N LA 5 3 XSa b c d e f g



1



Tip Styles ST401



RCP030 N CR03x y z




RCP030 N VR04 3 0 35x y z w1 w2 w3


• w1: Wire Diameter • w2: Colour • w3: Length* If letter X is in any place instead of digit means no information

about the wire length / diameter / colour is provided.






- -

TH1 TBP7500 - -






- has to be chosen*

Handle TH1







AC

TU

AL

SIZ

E

RC

P03

0

Soc

kets

/ R

ecep

tacl

es ▪

40 M

il /

1.00

mm



Equip, double press-ring Sockets / Receptacles offer very high stability and better pointing accuracy.






Soc

kets

/ R

ecep

tacl

es ▪

40 M

il /

1.00

mm

AC

TUA

L S

IZE

RCP030 Sockets / Receptacles for ST400 Sockets / Receptacles for ST400 RCP030

Centers 40 Mil / 1.00 mm Centers 40 Mil / 1.00 mmR

CP

030

Design Code Options

WR Wire Wrap Square Post

VR Pre-wired with Kynar Wire

CR Crimp



RCP030 N WR03x y z

Code Material

No letter Hard Gold




*For more Technical information about Installation Heights for other Series consult with us at: [email protected]


LF400

LF401

ST400

ST401

RCP030 CR03



• Feature: double press - ring

Plating: Hard Gold

RCP030 WR03



Plating: Hard Gold

RCP030 VR04 3035



• Feature: double press - ring vacuum sealed

Plating: Hard Gold


- has to be chosen*

Handle TH1


RCP030 VR04 3 0 35x y z w1 w2 w3







Installation Heights

w3: Wire Length




w2: Wire Colour

0 Black


AWG mm [inches]

3 30 0.26 0.010


AC

TUA

L S

IZE


MP

300

Mic

ro P

robe

s ▪ 3

0 M

il /

0.76

mm

Mic

ro P

robe

s ▪ 3

0 M

il /

0.76

mm

AC

TU

AL

SIZ

E

MP300 Micro Probes

MP

300 Tip Styles MP300

Tip StylesPlunger Material

Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

CC 5 3 - 0.28 0.011

Plunger Plating

Code Material

No letter Hard Gold

Recommended Socket / Receptacle Series for small size Micro Probes MP300 is RCP021

See Page 58 for detailed information.


MP300 N CC 5 3 Ma b c d e f g




Code Rated force

(N) [oz]

M 0.30 1.1

Plunger Material

Code Material

5 Steel




Max. Current: 0.5 A (continuous)


Barrel Material: Bronze - Gold Plated





RCP021 VR03 2627


• Variable: not variable

Material: Brass

Plating: Hard Gold

6

Installation Height

Tool for MP300 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*




- -

TH1 TBP7500 - -



- has to be chosen*

Handle TH1




These extremely small size Micro Test Probes are a perfect choice for fine-pitch applications.



w3: Wire Length



w2: Wire Colour

6 Blue


AWG mm [inches]

2 32 0.20 0.008


RCP021 VR03 2 6 27x y z w1 w2 w3





AC

TUA

L S

IZE


ST5

10

Mul

ti-p

urpo

se P

robe

s ▪ 5

0 M

il /

1.27

mm

Mul

ti-p

urpo

se P

robe

s ▪ 5

0 M

il /

1.27

mm

AC

TU

AL

SIZ

E

59 60

ST510 Multi-purpose Test Probes

ST5

10

Tip Styles ST510


Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

RA 5 4 - 0.50 0.020

TA 5 4 - 0.90 0.035

UB 0 3 - 0.50 0.020

Plunger Plating

Code Material

No letter Hard Gold

Recommended Socket / Receptacle Series for small size Multi-purpose Test Probes ST510 is RCP034



ST510 N TA 5 4 MXa b c d e f g




Code Rated force

(N) [oz]

MX 0.70 2.5

NX 1.00 3.6

Plunger Material

Code Material

0 BeCu

5 Steel











RCP034 SR06



Material: Brass

Plating: Hard Gold

Installation Height

RCP034 CR06








- has to be chosen*

Handle TH1





These small size Multi-purpose Test Probes are a perfect choice for ICT / FCT as well as for Special Purpose Machines with Automation and Robotic solutions. Perfect choice for high – demand applications. Telecom and Communication Industrie use this probe worldwide.


RCP034 N SR06x y z

Code Material

No letter Hard Gold





AC

TU

AL

SIZ

E

Mul

ti-p

urpo

se P

robe

s ▪ 7

5 M

il /

1.91

mm

ST7

55

Series ST755 is a short and tiny Test Probe that is typically used in Mobile Communication Applications for Functional Test Jigs.











Code Rated force

(N) [oz]

XS 0.57 2.1

M 1.08 3.9

X 1.80 6.5



Plunger Plating

Code Material

No letter Hard Gold

Recommended Socket / Receptacle Series for Multi-purpose Test Probes ST755 is RCP052.


ST7

55

AC

TUA

L S

IZE

Mul

ti-p

urpo

se P

robe

s ▪ 7

5 M

il /

1.91

mm


Tip Styles ST755



Tip Diameter

Code

Diameter

mm [inches]

CG 0 5 1.50 0.059

TA 0 8 1.50 0.059

UB 0 4 0.72 0.028

6261

RCP052 SR09



Material: Bronze / BeCu

Plating: Hard Gold

Plunger Material

Code Material

0 BeCu






Installation Height





-

TH1 TBP7500 - TBP7570



RCP052 N SR09x y z

Code Material

No letter Hard Gold




Tool for RCP052 Sockets / Receptacles Contains:Tool Handle + Exchangeable Bit(s) - has to be chosen*






RCP052 WR21



AC

TUA

L S

IZE


ST1011 Multi-purpose Test Probes Tip Styles ST1011S

T101

1

ST1

011

Mul

ti-p

urpo

se P

robe

s ▪ 1

00 M

il /

2.54

mm

Mul

ti-p

urpo

se P

robe

s ▪ 1

00 M

il /

2.54

mm

AC

TU

AL

SIZ

E


Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

CC 0 7 R 1.52 0.060

CG 0 7 - 1.91 0.075

ER 0 5 - 1.80 0.070

TA 0 9 - 1.91 0.075

UB 0 4 - 1.02 0.040

These robust-designed Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications.

Plunger Plating

Code Material

No letter Hard Gold

R Rhodium




ST1011 N CG 0 7 SXa b c d e f g




Code Rated force

(N) [oz]

SX 1.00 3.6

MX 1.50 5.4

XL 2.80 10.0


0 BeCu











RCP066 SR12




Plating: Hard Gold

RCP066 WR32




Plating: Hard Gold







TH1 TBP10000 TBP10035 TBP10070



- has to be chosen*

Handle TH1






RCP066 N SR12x y z

Code Material

No letter Hard Gold





AC

TU

AL

SIZ

E

Mul

ti-p

urpo

se P

robe

s ▪ 1

00 M

il /

2.54

mm

ST1

020


Code Rated force

(N) [oz]

M 1.50 5.4

L 2.20 7.9

X 3.00 10.8










Plunger Material

Code Material

0 BeCu

5 Steel

Plunger Plating

Code Material

No letter Hard Gold

N Nickel

R Rhodium






ST1020 R CG 5 6 Ma b c d e f g



ST1

020


AC

TUA

L S

IZE

Mul

ti-p

urpo

se P

robe

s ▪ 1

00 M

il /

2.54

mm


Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

CC 5 4 - 1.30 0.051

CG

5 5 R 1.80 0.071

5 6 - 2.00 0.079

5 8 N 2.50 0.098

TA0 3 - 1.40 0.055

0 5 - 2.00 0.079

Tip Styles ST1020


Installation Height can be varied with the type of Socket / Receptacle that is used!





-

TH1 TBP10000 - TBP10070



- has to be chosen*

Handle TH1





These robust-designed Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications..



RCP079 N WR03x y z

Code Material

No letter Hard Gold








≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡67

AC

TU

AL

SIZ

E

Mul

ti-p

urpo

se P

robe

s ▪ 1

00 M

il /

2.54

mm

ST1

023


Code Rated force

(N) [oz]

M 1.50 5.4

L 2.20 7.9

X 3.00 10.8










Plunger Material

Code Material

5 Steel

Plunger Plating

Code Material

No letter Hard Gold

R Rhodium









68

ST1

023


AC

TUA

L S

IZE

Mul

ti-p

urpo

se P

robe

s ▪ 1

00 M

il /

2.54

mm


Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

CG 5 6 - 2.00 0.079

HK 5 5 R 1.75 0.079

Tip Styles ST1023







-

TH1 TBP10000 - TBP10070



- has to be chosen*

Handle TH1










RCP079 N WR03x y z

Code Material

No letter Hard Gold





AC

TU

AL

SIZ

E

AC

TUA

L S

IZE



T102

8

ST1

028

Mul

ti-p

urpo

se P

robe

s ▪ 1

00 M

il /

2.54

mm

Mul

ti-p

urpo

se P

robe

s ▪ 1

00 M

il /

2.54

mm

69 70










Plunger Material

Code Material

5 Steel




ST 1028 N TA 5 5 Ma b c d e f g





Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

HK 5 4 N 1.75 0.069

TA 5 5 - 2.00 0.079

UB 5 5 - 1.00 0.039






-

TH1 TBP10000 - TBP10070



- has to be chosen*

Handle TH1









RCP079 N WR03x y z

Code Material

No letter Hard Gold






Code Rated force

(N) [oz]

M 1.50 5.4

L 2.20 7.9

X 3.00 10.8

Plunger Plating

Code Material

No letter Hard Gold

N Nickel


AC

TUA

L S

IZE



T103

0

ST1

030

Mul

ti-p

urpo

se P

robe

s ▪ 1

00 M

il /

2.54

mm

Mul

ti-p

urpo

se P

robe

s ▪ 1

00 M

il /

2.54

mm

71 72


Code Rated force

(N) [oz]

M 1.50 5.4

L 2.20 7.9

X 3.00 10.8

U 5.00 18.0










Plunger Material

Code Material

5 Steel

Plunger Plating

Code Material

No letter Hard Gold

N Nickel




ST1030 N FA 5 5 Ua b c d e f g





Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

CA 5 5 - 2.00 0.079

CC 5 4 - 1.30 0.051

FA 5 5 - 1.00 0.039

TA 5 5 - 2.00 0.079

UB 5 5 N 1.00 0.039







TH1 TBP10000 TBP10035 TBP10070



- has to be chosen*

Handle TH1





These robust-designed Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications..



RCP079 N WR03x y z

Code Material

No letter Hard Gold




AC

TU

AL

SIZ

E


RCP079 SR06



Plating: Hard Gold

AC

TU

AL

SIZ

E


RCP079 Sockets / Receptacles Sockets / Receptacles RCP079R

CP

079

RC

P07

9

Soc

kets

/ R

ecep

tacl

es ▪

100

Mil

/ 2.

54 m

m

Soc

kets

/ R

ecep

tacl

es ▪

100

Mil

/ 2.

54 m

m

RCP079 SR04



Plating: Hard Gold

RCP079 SR09



Plating: Hard Gold

RCP079 SR05



Plating: Hard Gold

RCP079 WR10



Plating: Hard Gold

RCP079 WR03



Plating: Hard Gold

RCP079 WR11



Plating: Hard Gold

Usage of Sockets / Receptacles




Barrel Material: Brass / Beryllium Copper / Nickel Silver





SR Solderable

SR Solderable


RCP079 SR03



Plating: Hard Gold




TH1 TBP10000 TBR10036 TBR10071


SR1003

SR1005 SR1006

SR1004

By placing these Spacing Rings under the Sockets / Receptacles collars, more customized Installation Heights can be reached on a very cost – effective way.



RCP079 N SR04x y z

Code Material

No letter Hard Gold




ST1013

ST1014

ST1015

ST1016

ST1017

ST1018

ST1019

ST1020

ST1023

ST1028

ST1030

ST1034

ST1036

ST1055

High-current Series with RCP079 SR04 & WR03 only!

HC1000

HC1001

HC1002

HC1003

HC1004

HC1005

HC1007

HC1008

HC1033

AC

TUA

L S

IZE


AC

TUA

L S

IZE



T101

3

ST1

013

Mul

ti-p

urpo

se P

robe

s ▪ 1

00 M

il /

2.54

mm

Mul

ti-p

urpo

se P

robe

s ▪ 1

00 M

il /

2.54

mm

AC

TU

AL

SIZ

E

75 76


Code Rated force

(N) [oz]

M 1.50 5.4

L 2.20 7.9

X 3.00 10.8

U 5.00 18.0













ST1013 N CG 5 4 La b c d e f g





Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

CC5 3 - 1.30 0.051

5 4 - 1.80 0.071

CG

5 4 - 1.40 0.055

5 6 R 1.80 0.071

5 8 R 2.50 0.098

ER

5 3 - 1.30 0.051

5 4 - 1.40 0.055

5 6 - 1.80 0.071

FA 0 5 - 2.50 0.098

LA 5 3 N 1.30 0.051

TA

5 4 N 1.80 0.071

0 6 - 2.00 0.079

0 7 - 2.50 0.098

UB5 5 R 0.80 0.031

5 7 R 1.30 0.051

UH 5 5 - 0.80 0.031Plunger Material

Code Material

0 BeCu

5 Steel

Plunger Plating

Code Material

No letter Hard Gold

R Rhodium

N Nickel






TH1 TBP10000 TBP11835 TBP11870



- has to be chosen*

Handle TH1





These robust-designed double guided Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications.



RCP079 N WR03x y z

Code Material

No letter Hard Gold








AC

TUA

L S

IZE



T101

4

ST1

014

Mul

ti-p

urpo

se P

robe

s ▪ 1

00 M

il /

2.54

mm

Mul

ti-p

urpo

se P

robe

s ▪ 1

00 M

il /

2.54

mm

AC

TU

AL

SIZ

E

77 78













ST1014 R CG 0 7 Xa b c d e f g



Plunger Material

Code Material

0 BeCu

Plunger Plating

Code Material

R Rhodium


Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

CG0 7 R 2.00 0.079

0 8 R 2.50 0.098


These robust designed double guided Test Probes are a perfect choice for ICT / FCT as well as for Special Purpose Machines with Automation and Robotic solutions. Perfect choice for high – demand applications.


RCP079 N WR03x y z

Code Material

No letter Hard Gold





∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected] detailed Sockets / Receptacles for ST1014 See Page 73 - 74.




TH1 TBP10000 TBR10036 TBR10071






-

TH1 TBP10000 - TBP11870



Code Rated force

(N) [oz]

M 1.50 5.4

L 2.20 7.9

X 3.00 10.8

U 5.00 18.0





AC

TUA

L S

IZE



T101

5

ST1

015

Mul

ti-p

urpo

se P

robe

s ▪ 1

00 M

il /

2.54

mm

AC

TU

AL

SIZ

E

















Plunger Material

Code Material

0 BeCu

Plunger Plating

Code Material

No letter Hard Gold

R Rhodium


Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

CG 0 8 R 2.50 0.098

TA 0 6 - 2.00 0.079






-

TH1 TBP10000 - TBP11870




RCP079 N WR03x y z

Code Material

No letter Hard Gold




Tool for RCP079 Sockets / Receptacles Contains Tool Handle + Exchangeable Bit(s)*



TH1 TBP10000 TBR10036 TBR10071





Mul

ti-p

urpo

se P

robe

s ▪ 1

00 M

il /

2.54

mm


Code Rated force

(N) [oz]

M 1.50 5.4

L 2.20 7.9

X 3.00 10.8

U 5.00 18.0




AC

TUA

L S

IZE



T101

6

ST1

016

Mul

ti-pu

rpos

e Pr

obes

▪ 10

0 M

il /

2.54

mm

Mul

ti-pu

rpos

e Pr

obes

▪ 10

0 M

il /

2.54

mm

AC

TU

AL

SIZ

E


Code Rated force

(N) [oz]

M 1.50 5.4

L 2.20 7.9

X 3.00 10.8

U 5.00 18.00










Recommended Socket / Receptacle Series forMulti-purpose Test Probes ST1016 is RCP079.






Plunger Material

Code Material

5 Steel

Plunger Plating

Code Material

No letter Hard Gold

N Nickel

R Rhodium



Tip Diameter Code

Plunger Plating

Tip Diameter

mm [inches]

CG5 6 R 1.80 0.071

5 8 R 2.50 0.098

LA 5 3 N 1.30 0.051

UH 5 5 - 0.80 0.031






TH1 TBP10000 TBP11835 TBP11870







RCP079 N WR03x y z

Code Material

No letter Hard Gold






TH1 TBP10000 TBR10036 TBR10071






AC

TUA

L S

IZE



T101

7

ST1

017

AC

TU

AL

SIZ

E
















Plunger Plating

Code Material

R Rhodium



Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

CG 0 8 R 2.50 0.098

Plunger Material

Code Material

5 Steel






-

TH1 TBP10000 - BP12570





TH1 TBP10000 TBR10036 TBR10071



Mul

ti-pu

rpos

e Pr

obes

▪ 10

0 M

il /

2.54

mm

Mul

ti-pu

rpos

e Pr

obes

▪ 10

0 M

il /

2.54

mm

For detailed Sockets / Receptacles for ST1017 See Page 73 - 74.∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]



RCP079 N WR03x y z

Code Material

No letter Hard Gold





Code Rated force

(N) [oz]

M 1.50 5.4

L 2.20 7.9

X 3.00 10.8

U 5.00 18.00




AC

TUA

L S

IZE



T101

8

ST1

018

AC

TU

AL

SIZ

E













ST1018 N LA 5 3 Ma b c d e f g



Plunger Plating

Code Material

No letter Hard Gold

N Nickel

R Rhodium



Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

CG0 6 R 1.80 0.071

0 7 R 2.00 0.079

HK 5 4 N 1.75 0.069

LA 5 3 N 1.30 0.051

TA 0 4 - 1.80 0.071

Plunger Material

Code Material

0 BeCu

5 Steel






TH1 TBP10000 TBP11835 TBP11870



Mul

ti-pu

rpos

e Pr

obes

▪ 10

0 M

il /

2.54

mm

Mul

ti-pu

rpos

e Pr

obes

▪ 10

0 M

il /

2.54

mm



RCP079 N WR03x y z

Code Material

No letter Hard Gold






- has to be chosen*

Handle TH1






Code Rated force

(N) [oz]

M 1.50 5.4

L 2.20 7.9

X 3.00 10.8

U 5.00 18.00


AC

TUA

L S

IZE



T101

9

ST1

019

AC

TU

AL

SIZ

E
















Plunger Plating

Code Material

No letter Hard Gold

R Rhodium



Tip Diameter Code

Plunger Plating

Tip Diameter

mm [inches]

CC 5 4 - 1.80 0.071

CG0 6 R 1.80 0.071

0 7 - 2.00 0.079

ER 5 8 - 2.50 0.098

TA 0 6 - 2.00 0.079

UB 5 7 - 1.30 0.051

Plunger Material

Code Material

0 BeCu

5 Steel






TH1 TBP10000 TBP11835 TBP11870



- has to be chosen*

Handle TH1








RCP079 N WR03x y z

Code Material

No letter Hard Gold





Mul

ti-pu

rpos

e Pr

obes

▪ 10

0 M

il /

2.54

mm

Mul

ti-pu

rpos

e Pr

obes

▪ 10

0 M

il /

2.54

mm


Code Rated force

(N) [oz]

M 1.50 5.4

L 2.20 7.9

X 3.00 10.8

U 5.00 18.00




AC

TUA

L S

IZE

89 90

AC

TU

AL

SIZ

E


Tip Styles ST1034ST1034 Multi-purpose Test Probes

ST1

034

ST1

034










Plunger Plating

Code Material

No letter Hard Gold

N Nickel

R Rhodium








Code Rated force

(N) [oz]

M 1.50 5.4

L 2.20 7.9

X 3.00 10.8

U 5.00 18.0







TH1 TBP10000 TBP11835 TBP11870





TH1 TBP10000 TBR10036 TBR10071



Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

CA 5 3 - 1.30 0.051

CC5 4 - 1.30 0.051

5 6 - 2.00 0.079

CG5 4 R 1.50 0.059

0 6 R 2.00 0.079

ER 5 3 - 1.30 0.051

HK 5 3 - 1.80 0.071

LA 5 4 N 1.30 0.051

RA 5 4 - 1.50 0.059

SC 5 2 - 1.50 0.059

UB 5 4 R 1.30 0.051

UH 5 4 - 0.80 0.031




Mul

ti-pu

rpos

e Pr

obes

▪ 10

0 M

il /

2.54

mm

Mul

ti-pu

rpos

e Pr

obes

▪ 10

0 M

il /

2.54

mm


RCP079 N WR03x y z

Code Material

No letter Hard Gold




Plunger Material

Code Material

0 BeCu

5 Steel



AC

TUA

L S

IZE



T103

6

ST1

036


Tip Diameter

Code

Plunger Plating

Tip Diameter

mm[inch-

es]

CA 5 4 N 1.30 0.051

CG 5 3 R 1.30 0.051

TA

0 4 - 1.80 0.071

0 5 - 2.00 0.079






Barrel Material: Phosphor Bronze / Beryllium Copper




Plunger Plating

Code Material

No letter Hard Gold

R Rhodium




ST1036 R TA 0 4 Ma b c d e f g




Code Rated force

(N) [oz]

M 1.50 5.4

X 3.00 10.8

Plunger Material

Code Material

0 BeCu

5 Steel






-

TH1 TBP10000 - TBP10070



- has to be chosen*

Handle TH1








RCP079 N WR03x y z

Code Material

No letter Hard Gold



Mul

ti-pu

rpos

e Pr

obes

▪ 10

0 M

il /

2.54

mm

Mul

ti-pu

rpos

e Pr

obes

▪ 10

0 M

il /

2.54

mm



AC

TU

AL

SIZ

E


AC

TUA

L S

IZE



T125

0

ST1

250

Mul

ti-p

urpo

se P

robe

s ▪ 1

25 M

il /

3.18

mm

Mul

ti-p

urpo

se P

robe

s ▪ 1

25 M

il /

3.18

mm

AC

TU

AL

SIZ

E

93 94













Tip Diameter

Code

Plunger Plating

Diameter

mm [inches]

CA 5 5 R 2.50 0.098

CG 5 5 - 2.50 0.098

FA 0 7 - 2.50 0.098

RA 0 11 - 2.50 0.098

TA 5 5 - 2.50 0.098


Code Rated force

(N) [oz]

MX 1.50 5.4

L 2.20 7.9

X 3.00 10.8

Plunger Material

Code Material

0 BeCu

5 Steel


ST1250 R CA 5 5 La b c d e f g




RCP093 SR03

Installation Height• Fixed: 16 mm [0.630]



Material: BeCu / Nickel Silver

Plating: Hard Gold


Installation Height





-

TH1 TBP10000 - TBP12570



- has to be chosen*

Handle TH1





Plunger Plating

Code Material

No lett er Hard Gold

R Rhodium



RCP093 N SR03x y z

Code Material

No letter Hard Gold





AC

TUA

L S

IZE


ST1608 Multi - purpose Test Probes Tip Styles ST1608S

T160

8

ST1

608

Mul

ti-pu

rpos

e Pr

obes

▪ 16

0 M

il /

4.00

mm

Mul

ti-pu

rpos

e Pr

obes

▪ 16

0 M

il /

4.00

mm

95 96

















Code Rated force

(N) [oz]

M 1.50 5.4

L 2.20 7.9

X 3.00 10.8

U 5.00 18.0

Plunger Material

Code Material

5 Steel

Plunger Plating

Code Material

No letter Hard Gold

N Nickel


Installation Height





TH1 TBP16000 TBP16035 TBP16070



- has to be chosen*

Handle TH1







For detailed Sockets / Receptacles for ST1608 See Page 99.


RCP118 N SR06x y z

Code Material

No letter Hard Gold




Tip Styles for ST1608 Plunger Material

Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

CG

5 4 - 2.30 0.091

5 6 - 3.00 0.118

5 8 - 4.00 0.157

RA 5 6 - 1.80 0.071

RA 5 7 - 2.30 0.091

TA 5 4 N 2.50 0.098


Material: Brass - Gold Plated

SR1605 Spacer Ring

SR1606 Spacer Ring

SR1604 Spacer Ring

Not available standard insertion / extraction tool for this tip size in default grid. Please See Page 7 for list of Special Tools.

High-current version available. See Page 164.

AC

TU

AL

SIZ

E


AC

TUA

L S

IZE

97 98



ST1

609













ST1609 R TA 5 4 Xa b c d e f g



Plunger Material

Code Material

5 Steel

Plunger Plating

Code Material

No letter Hard Gold

N Nickel

R Rhodium


Tip Styles

ST1

609


Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

CG

5 4 - 2.30 0.090

5 6 - 3.00 0.118

5 8 - 4.00 0.157

FA5 6 - 1.80 0.071

5 7 2.30 0.090

RA 5 7 - 2.30 0.090

TA5 4 N 2.50 0.098

5 6 4.00 0.157

TB 5 3 - 3.00 0.118

UB 5 3 R 1.80 0.071


Installation Height







TH1 TBP16000 TBP16035 TBP16070



RCP118 N SR06x y z

Code Material

No letter Hard Gold




For detailed Sockets / Receptacles for ST1609 See Page 99.

SR1605 Spacer Ring

SR1606 Spacer Ring

SR1604 Spacer Ring



Mul

ti-pu

rpos

e Pr

obes

▪ 16

0 M

il /

4.00

mm

Mul

ti-pu

rpos

e Pr

obes

▪ 16

0 M

il /

4.00

mm


Code Rated force

(N) [oz]

M 1.50 5.4

L 2.20 7.9

X 3.00 10.8



AC

TU

AL

SIZ

E


- has to be chosen*

Handle TH1






AC

TUA

L S

IZE

s


RCP118 Sockets / Receptacles Sockets / Receptacles RCP118

RC

P118

RC

P118

Soc

kets

/ R

ecep

tacl

es ▪

160

Mil

/ 4.

00 m

m

Soc

kets

/ R

ecep

tacl

es ▪

160

Mil

/ 4.

00 m

m

AC

TU

AL

SIZ

E

RCP118 SR06



Plating: Hard Gold

RCP118 SR07



Plating: Hard Gold

RCP118 WR05



Plating: Hard Gold




Socket / Receptacle Material: Brass




Installation Height for Test Probe ST1608 Installation Height for Test Probe ST1609




TH1 TBP16000 TBR16035 TBR16070


*For more Technical information about Installation Heights for other Series consult with us at: [email protected]


RCP118 N SR06x y z

Code Material

No letter Hard Gold





SR Solderable

SR Solderable


ST1608

ST1609

HC1600

HC1601

HC1602

SWO1400 (SR06)

NRSW1400 (SR06)


AC

TUA

L S

IZE



T161

5

ST1

615

AC

TU

AL

SIZ

E

101 102


Tip Diameter

Code

Tip Diameter

mm [inches]

CG8 3 2.30 0.091

5 5 4.00 0.157

FA 8 5 6.50 0.256










Plunger Plating

Code Material

No letter Hard Gold







Plunger Material

Code Material

5 Steel

8 Brass

RCP138 SR03



Plating: Hard Gold

Material: Brass / Phosphor Bronze

RCP138 SR04



Plating: Hard Gold

Material Brass / Phosphor Bronze


Code Rated force

(N) [oz]

M 1.50 5.4

X 3.00 10.8


SR1607 Spacer Ring

SR1608 Spacer Ring

SR1609 Spacer Ring

Installation Height





-

TH1 TBP16000 - TBP16070



- has to be chosen*

Handle TH1

Universal Pressing BitTBR16001





Mul

ti-pu

rpos

e Pr

obes

▪ 16

0 M

il /

4.00

mm

Mul

ti-pu

rpos

e Pr

obes

▪ 16

0 M

il /

4.00

mm



*CG Tip Height is 4 mm and FA Tip Height is 3 mm.


RCP138 N SR03x y z

Code Material

No letter Hard Gold







AC

TUA

L S

IZE



T161

6

ST1

616

AC

TU

AL

SIZ

E

103 104


Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

CG 0 6 R 4.00 0.157

RA 5 3 R 1.80 0.071

Plunger Plating

Code Material

R Rhodium








Code Rated force

(N) [oz]

M 1.50 5.4

X 3.00 10.8

U 5.00 18.0

Plunger Material

Code Material

0 BeCu

5 Steel











ST1616R RA53 M

Installation Height





TH1 TBP16000 TBP16035 TBP16070



- has to be chosen*

Handle TH1





These robust-designed Test Probes, with a continuous/through plunger, are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. The through-hole Plunger enables this Probe to push a Switch Probe that is mounted underneath.

Mul

ti-pu

rpos

e Pr

obes

▪ 16

0 M

il /

4.00

mm

Mul

ti-pu

rpos

e Pr

obes

▪ 16

0 M

il /

4.00

mm



RCP138 N SR03x y z

Code Material

No letter Hard Gold




For detailed Sockets / Receptacles for ST1616 see Page 102.



AC

TUA

L S

IZE



T180

0

ST1

800

Mul

ti-p

urpo

se P

robe

s ▪ 1

80 M

il /

4.57

mm

Mul

ti-p

urpo

se P

robe

s ▪ 1

80 M

il /

4.57

mm

AC

TU

AL

SIZ

E

105 106


Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

CG 5 4 - 3.96 0.156

TA 5 5 - 3.96 0.156

UB 5 3 R 1.52 0.060

Plunger Plating

Code Material

No letter Hard Gold

R Rhodium




ST1800 N CG 5 4 La b c d e f g




Code Rated force

(N) [oz]

M 1.50 5.4

L 2.50 9.0

X 3.00 10.8

Plunger Material

Code Material

5 Steel


Recommended Working Stroke: 4.40mm [0.173]







Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆ ≡ Tip Diameter Code changes according to the Tip Style.

RCP106 SR03




Material: Nickel Silver

Plating: Hard Gold


Installation Height





TH1 TBP20000 TBP18735 TBP18770



- has to be chosen*

Handle TH1








RCP106 N SR03x y z

Code Material

No letter Hard Gold




AC

TUA

L S

IZE

Centers 177 Mil / 4.50 mm Centers 177 Mil / 4.50mm


T187

0

ST1

870

Mul

ti-p

urpo

se P

robe

s ▪ 1

77 M

il /

4.50

mm

Mul

ti-p

urpo

se P

robe

s ▪ 1

77 M

il /

4.50

mm

AC

TU

AL

SIZ

E


Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

CG 0 4 R 3.96 0.156

RA 0 3 - 2.03 0.080

TA 0 3 R 2.36 0.093

UB 0 3 R 2.03 0.080

Plunger Plating

Code Material

R RhodiumRecommended Socket / Receptacle Series for

Multi-purpose Test Probes ST1870 is RCP139. See Page 108 for detailed information.


ST1870 R CG 0 4 Na b c d e f g




Code Rated force

(N) [oz]

N 2.25 8.1

X 4.75 17.1

Plunger Material

Code Material

0 BeCu


Recommended Working Stroke: 4.40mm [0.173]









RCP139 SR03




Material: Bronze / Nickel Silver

Plating: Hard Gold


Installation Height





TH1 TBP20000 TBP18736 TBP18771



- has to be chosen*

Handle TH1








RCP139 N SR03x y z

Code Material

No letter Hard Gold






IT1000 Interface Probes

IT10

00In

terf

ace

Pro

bes ▪ 1

00 M

il /

2.54

mm

AC

TU

AL

SIZ

E

AC

TUA

L S

IZE


Tip Styles IT1000

IT10

00

Inte

rfac

e P

robe

s ▪ 1

00 M

il /

2.54

mm


Tip Diameter

Code

Tip Diameter

mm [inches]

1ER 0 3 1.02 0.040

Interface Probes provide the electro-mechanical contact between the Test System and the Test Fixture.

IT1000 Interface Probes are used in 170-TP "Pylon Type" Signal Blocks and as replacement Probes in the following Teradyne/GenRad ICT Test Systems:

2270; 2271; 2272; 2282 (all models); 2283; 2284; 2286; 2287 manufactured before 07/1995.

Furthermore they are also used in Rohde & Schwarz ICT and 3030 SPEA ICT Test Systems & SPEA Towers.

Plunger Plating

Code Material

No letter Hard Gold

Recommended Socket / Receptacle Series for Interface Probes IT1000 is RCP066.



IT1000 N 1ER 0 3 Sa b c d e f g




Code Rated force

(N) [oz]

S 1.10 3.96

Plunger Material

Code Material

0 BeCu











Tool for IT1000 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*




TH1 TBP10000 TBP10035 TBP10070



- has to be chosen*

Handle TH1







RCP066 N WR46x y z

Code Material

No letter Hard Gold



VF1 Vacuum ICT Fixture Kit with "Pylon Type" Interface Frame

RCV-ST-170 pole Signal Receiver (Test System) Side

RCV-ST-170 pole Signal ITA Interchangeable Test Adapter

(Test Fixture) Side

RCP066 WR46

Plating: Hard Gold




BIT1000 Banana Interface Probes

BIT

1000

AC

TU

AL

SIZ

E


Tip Styles BIT1000

BIT

1000


Tip Diameter

Code

Tip Diameter

mm [inches]

1ER 0 3 1.02 0.040

Banana Interface Probes are used when the Sockets / Receptacles loose their securing force after the Interface Probes have been exchanged a number of times. In this case, the Banana-style Probes allow continued usage of the Receptacles and avoids expensive maintenance work (extraction and re-wiring) when replacing them.

The BIT 1000 Banana Interface Probe is the replacement probe for the following Teradyne/GenRad ICT Test Systems:

2270; 2271; 2272; 228x ICA (all models); 2283; 2284; 2286; 2287 manufactured before 07/1995.

Plunger Plating

Code Material

No letter Hard Gold Recommended Socket / Receptacle Series for Banana Interface Probes BIT1000 is RCP066.



BIT1000 N 1ER 0 3 SXa b c d e f g

aa: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]



Code Rated force

(N) [oz]

SX 1.20 4.3

Plunger Material

Code Material

0 BeCu











Tool for BIT1000 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*




TH1 TBP10000 TBP10035 TBP10070


AC

TUA

L S

IZE

Ban

ana

Inte

rfac

e Pr

obes

▪ 10

0 M

il /

2.54

mm

Ban

ana

Inte

rfac

e Pr

obes

▪ 10

0 M

il /

2.54

mm



- has to be chosen*

Handle TH1






RCP066 N WR46x y z

Code Material

No letter Hard Gold



RCP066 WR46

Plating: Hard Gold



AC

TUA

L S

IZE

113 114



IT10

01A

CT

UA

L S

IZE


Tip Styles IT1001

IT10

01


Tip Diameter

Code

Tip Diameter

mm [inches]

UB 0 3 1.02 0.040

Plunger Plating

Code Material


Interface Probes IT1001 is RCP066. See Page 114 for detailed information.


IT1001 N UB 0 3 SXa b c d e f g




Code Rated force

(N) [oz]

SX 1.20 4.3

Plunger Material

Code Material

0 BeCu















TH1 TBP10000 TBP10035 TBP10070



IT1001 Interface Probes are used in 170-TP "Pylon Type" Signal Blocks and as replacement Probes in the following Teradyne/GenRad ICT Test Systems:

2280; 2281; 2281a; 2287a; 228x ICA (all models); 2283; 2284; 2286; 2287 manufactured after 07/1995.


RCP066 N WR46x y z

Code Material

No letter Hard Gold




Inte

rfac

e P

robe

s ▪ 1

00 M

il /

2.54

mm

Inte

rfac

e P

robe

s ▪ 1

00 M

il /

2.54

mm


- has to be chosen*

Handle TH1





RCP066 WR46

Plating: Hard Gold




BIT1001 Banana Interface Probes

BIT

1001

A

CT

UA

L S

IZE


Tip Styles BIT1001

BIT

1001


Tip Diameter

Code

Tip Diameter

mm [inches]

ER 0 3 1.00 0.039

UB 0 3 1.02 0.040

Banana Interface Probes are used when the Sockets/Receptacles loose their securing force after the Interface Probes have been exchanged a number of times. In this case, the Banana-style Probes allow continued usage of the Receptacles and avoids expensive maintenance work (extraction and re-wiring) when replacing them.

The BIT 1001 Banana Interface Probe is the replacement probe for the following Teradyne/GenRad ICT Test Systems:

2280; 2281; 2281a; 2287a; 228x ICA (all models); 2283; 2284; 2286; 2287 manufactured before 07/1995

Plunger Plating

Code Material

No letter Hard Gold

Recommended Socket / Receptacle Series for Banana Interface Probes BIT1001 is RCP066.



BIT1001 N UB 0 3 Sa b c d e f g




Code Rated force

(N) [oz]

S 1.00 3.6

SX 1.20 4.3

Plunger Material

Code Material

0 BeCu











Tool for BIT1001 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*




TH1 TBP10000 TBP10035 TBP10070


AC

TUA

L S

IZE≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating

RCP066 N WR46x y z

Code Material

No letter Hard Gold



Ban

ana

Inte

rfac

e Pr

obes

▪ 10

0 M

il /

2.54

mm

Ban

ana

Inte

rfac

e Pr

obes

▪ 10

0 M

il /

2.54

mm



- has to be chosen*

Handle TH1





RCP066 WR46

Plating: Hard Gold


≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡117 118117 118



IT10

02

AC

TU

AL

SIZ

E


Tip Styles IT1002

IT10

02


Tip Diameter

Code

Tip Diameter

mm [inches]

ER 0 3 1.57 0.061


IT1002 Interface Probes are used as replacement Probes in the following Teradyne/GenRad ICT Test Systems:

All model Numbers ending with "L" (High Density Capability).

Plunger Plating

Code Material

No letter Hard Gold




IT1002 N ER 0 3 Ma b c d e f g




Code Rated force

(N) [oz]

M 1.50 5.4

Plunger Material

Code Material

0 BeCu















-

TH1 TBP10000 - TBP10070


AC

TUA

L S

IZE

Inte

rfac

e P

robe

s ▪ 1

00 M

il /

2.54

mm

Inte

rfac

e P

robe

s ▪ 1

00 M

il /

2.54

mm



RCP066 N WR46x y z

Code Material

No letter Hard Gold




- has to be chosen*

Handle TH1





RCP066 WR46

Plating: Hard Gold


≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡119 120119 120119 120



IT10

03

AC

TU

AL

SIZ

E

AC

TUA

L S

IZE


Tip Styles IT1003

IT10

03


Tip Diameter

Code

Tip Diameter

mm [inches]

ER 0 3 1.50 0.059


• IT1003 Interface Probes are used as replacement Probes in the following Teradyne/GenRad ICT Test Systems: 1800; 7878; 8852; 8855.

• They are used as Interface Signal Probe for TR5001 and TR8001 Test System for Test Research Inc. (TRI) Machines.

Note: Other ICT Test Systems may use this same type of Probe too.

Plunger Plating

Code Material


Interface Probes IT1003 is RCP066.See Page 120 for detailed information.


IT1003 N ER 0 3 XSa b c d e f g




Code Rated force

(N) [oz]

XS 0.57 2.1

S 1.00 3.6

M 1.56 5.6

N 2.00 7.2

LX 3.06 11.0

Plunger Material

Code Material

0 BeCu















-

TH1 TBP10000 - TBP10070



- has to be chosen*

Handle TH1






RCP066 N WR13x y z

Code Material

No letter Hard Gold



Inte

rfac

e P

robe

s ▪ 1

00 M

il /

2.54

mm

Inte

rfac

e P

robe

s ▪ 1

00 M

il /

2.54

mm


RCP066 WR13

Plating: Hard Gold




IT1004 Interface Probes - Mint Pin

IT10

04 -

Min

t P

inA

CT

UA

L S

IZE


Tip Styles IT1004

IT10

04 -

Min

t P

in Tip Styles

Plunger Material

Tip Diameter

Code

Tip Diameter

mm [inches]

CI 0 3 3.10 0.122


IT1004 Interface Probes are used as replacement Probes for Keysight/Agilent 3070 ICT Test Systems.

Note: IT1004 is the so-called "Mint Pin".

Plunger Plating

Code Material


Interface Probes IT1004 is RCP066. See Page 122 for detailed information.


IT1004 N CI 0 3 Sa b c d e f g




Code Rated force

(N) [oz]

S 1.00 3.6

M 1.56 5.6

N 2.00 7.2

Plunger Material

Code Material

0 BeCu















-

TH1 TBP10000 - TBP10071


AC

TUA

L S

IZE



- has to be chosen*

Handle TH1






RCP066 N WR13x y z

Code Material

No letter Hard Gold



Inte

rfac

e P

robe

s ▪ 1

00 M

il /

2.54

mm

Inte

rfac

e P

robe

s ▪ 1

00 M

il /

2.54

mm

RCP066 WR13

Plating: Hard Gold





IT10

07

AC

TU

AL

SIZ

E

AC

TUA

L S

IZE


Tip Styles IT1007

IT10

07


Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

HK0 3 N 1.30 0.051

0 4 N 1.90 0.075


IT1007 Interface Probes are used as is replacement probe for Digitaltest MTS 300 ICT Test System series.

Plunger Plating

Code Material

N Nickel




IT1007 N HK 5 4 NXa b c d e f g




Code Rated force

(N) [oz]

NX 2.20 7.9

Plunger Material

Code Material

0 BeCu















-

TH1 TBP10000 - TBP10070




- has to be chosen*

Handle TH1






RCP066 N WR13x y z

Code Material

No letter Hard Gold



Inte

rfac

e P

robe

s ▪ 1

00 M

il /

2.54

mm

Inte

rfac

e P

robe

s ▪ 1

00 M

il /

2.54

mm

RCP066 WR13

Plating: Hard Gold


RCP066 CR12

Plating: Hard Gold



Centers 125 Mil / 3.17mm


IT12

50A

CT

UA

L S

IZE

AC

TUA

L S

IZE

Centers 125 Mil / 3.17mm

Tip Styles IT1250

IT12

50

Interface Signal Probe for TR5001 and TR8001 Test System for Test Research Inc. (TRI) Machines.

Plunger Plating

Code Material

No letter Hard Gold




IT1250 N CG 0 5 La b c d e f g




Code Rated force

(N) [oz]

L 2.00 7.2

Plunger Material

Code Material

0 BeCu














-

TH1 TBP10000 - TBP12571



Tip Diameter

Code

Tip Diameter

mm [inches]

CG 0 5 2.50 0.098

Inte

rfac

e P

robe

s ▪ 1

25 M

il /

3.17

mm

Inte

rfac

e P

robe

s ▪ 1

25 M

il /

3.17

mm



- has to be chosen*

Handle TH1






RCP093 N SR03x y z

Code Material

No letter Hard Gold



RCP093 SR03

Material: Brass

Plating: Hard Gold



FC1000 Fixture Customizing Probes - Test Jet

FC10

00

AC

TU

AL

SIZ

E


Fixture Customizing Probes - Test Jet FC1000

FC10

00


Tip Diameter

Code

Tip Diameter

mm [inches]

RS 0 3 1.40 0.055

Plunger Plating

Code Material

No letter Hard Gold

Recommended Socket / Receptacle Series for Interface Probes FC1000 is RCP066.See Page 128 for detailed information.


FC1000 N RS 0 3 Sa b c d e f g




Code Rated force

(N) [oz]

S 1.30 4.7

Plunger Material

Code Material

0 BeCu











Tool for FC1000 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*




-

TH1 TBP10000 - TBP10070


AC

TUA

L S

IZE



- has to be chosen*

Handle TH1






RCP066 N WR46x y z

Code Material

No letter Hard Gold



Test

Jet

Pro

bes ▪ 1

00 M

il /

2.54

mm

Test

Jet

Pro

bes ▪ 1

00 M

il /

2.54

mm

This type of Fixture-customizing Probe is made to connect Test Jet / OpenXpress / Q-Mux etc. Amplifier Boards, that are used in various Test Systems.

VTEP MUX Card PackageOrder Code: VTMUX - 1

Sensor PlateOrder Code: VTSP - 1*

TestJet Probe PackageOrder Code: VTHP - 1

*Different sizes available

RCP066 WR46

Plating: Hard Gold




FC1001 Fixture Customizing Probes - Polarity Check

FC10

01

AC

TU

AL

SIZ

E


Fixture Customizing Probes - Polarity Check FC1001

FC10

01


Tip Diameter

Code

Tip Diameter

mm [inches]

NB 0 3 1.57 0.062

This type of Fixture-customizing Probe is made to connect Polarity Check Amplifier Boards used in various Test Systems. This Test Probe is soldered directly to the edge of the PCB. It is called VTEP, FrameScan etc. by different ICT Test System Manufacturers.

Plunger Plating

Code Material

No letter Hard Gold

Recommended Socket / Receptacle Series for Interface Probes FC1001 is RCP066.See Page 130 for detailed information.


FC1001 N NB 0 3 Na b c d e f g




Code Rated force

(N) [oz]

N 2.00 7.2

Plunger Material

Code Material

0 BeCu















-

TH1 TBP10000 - TBP10070


AC

TUA

L S

IZE



- has to be chosen*

Handle TH1






RCP066 N WR13x y z

Code Material

No letter Hard Gold



Pol

arit

y C

heck

Pro

bes ▪ 1

00 M

il /

2.54

mm

Pol

arit

y C

heck

Pro

bes ▪ 1

00 M

il /

2.54

mm

VTEP Polarity Check Vertical Amplifier Package

Order Code: VTPCVP - 1

Sensor Plate for Polarity CheckOrder Code: VTPCSP - 1

*Different sizes available

RCP066 WR13

Plating: Hard Gold




FC1010 ESD Grounding Probe

FC10

10 -

ES

D G

roun

ding

AC

TU

AL

SIZ

E


Tip Styles FC1010

FC10

10 -

ES

D G

roun

dingTip Styles

Plunger Material

Tip Diameter

Code

Tip Diameter

mm [inches]

CG 0 5 1.50 0.059

ER 0 5 1.50 0.059

This Fixture-customizing Probe has an extra-long travel. As a Grounding Probe it offers an excellent solution for Fixture Manufacturers and End-customers, that have ESD problems related to constant grounding needs.

Plunger Plating

Code Material

No letter Hard Gold

Recommended Socket / Receptacle Series for Interface Probes FCFC1010 is RCP066.See Page 132 for detailed information.


FC1010 N CG 0 5 Na b c d e f g




Code Rated force

(N) [oz]

M 1.50 5.4

Plunger Material

Code Material

0 BeCu















-

TH1 TBP10000 - TBP10070


AC

TUA

L S

IZE



- has to be chosen*

Handle TH1






RCP066 N WR50x y z

Code Material

No letter Hard Gold



Long

- Tr

avel

Pro

bes ▪ 1

00 M

il /

2.54

mm

Long

- Tr

avel

Pro

bes ▪ 1

00 M

il /

2.54

mm

Installation Height



RCP066 WR50

Plating: Hard Gold

Material: Brass / Nickel Silver


AC

TUA

L S

IZE

Fixture Customizingtestjet Parts for Keysight / Agilent 3070 fixtures

Ope

ns T

esti

ng P

rodu

cts

Ope

ns T

esti

ng P

rodu

cts

Test

Jet

Par

ts

Test

Jet

Par

ts

AC

TU

AL

SIZ

E

Part Number: TJMUX - 1

TestJet MUX Card package for up to 64 sensors

Consists of:• 1 MUX card• Connectors• Ribbon Cable

Part Number: TJMUX - 2

TestJet MUX Card + Reference Card package for up to 64 sensors

Consists of:

• 1 MUX + Ref card• Connectors• Ribbon Cable

Part Number: TJP - 1

TestJet Probe Package

Consists of: • 1 Amplifier Board• 2 TestJet Probes: FC1000 RS03 S• 2 Sockets / Receptacles: RCP066 WR46

Part Number: TJSP - 1

TestJet Sensor Plate

Size: 12.00 x 9.50 x 1.30 mm[0.475" x 0.375" x 0.05"]



Size: 14.60 x 10.80 x 1.30 mm[0.575" x 0.425" x 0.05"]



Size: 31.80 x 31.80 x 1.30 mm[1.25" x 1.25" x 0.05"]


Sensor Plate

Size: 65.00 x 65.00 x 1.30 mm [2.56" x 2.56" x 0.05"]


Sensor Plate

Size: 159.00 x 12.70 x 1.30 mm [0.50" x 6.25" x 0.05"] thick

Part Number: PCVP - 1

Polarity Check Vertical Amplifier Package

Consists of:• 1 Amplifier Board• 2 Polarity Check Probes: FC 1001 NB03 N• 2 Sockets / Receptacles: RCP066 WR13

Part Number: PCSP - 1

Sensor Plate for Polarity Check

Size: 6.30 x 3.70 mm[0.248" x 0.147"]

Part Number: PCSP - 2

Sensor Plate for Polarity Check

Size: 7.60 x 4.90 mm[0.298" x 0.191"]

Fixture CustomizingTestJet Parts for

Keysight / Agilent 3070 fixtures


AC

TUA

L S

IZE

AC

TU

AL

SIZ

E

135 136

VTEP Parts for Keysight / Agilent 3070 fixtures

VTEP Parts for Keysight / Agilent 3070 fixtures

Part Number: VTMUX - 1

VTEP MUX Card Package

Consists of:• 1 MUX card• Connectors• Ribbon Cable

Part Number: VTMUX - 2

VTEP MUX Card + Reference Card Package

Consists of:• 1 MUX + Ref card• Connectors• Ribbon Cable

Part Number: VTHP - 1

VTEP Horizontal Amplifier Package

Consists of: • 1 Amplifier Board• 2 TestJet Probes: FC1000 RS03 S• 2 Sockets / Receptacles: RCP066 WR46

Part Number: VTSP - 1

VTEP Sensor Plate Size: 31.80 x 31.80 x 1.30 mm

[1.25" x 1.25" x 0.05"]

Part Number: VTSP - 2

Sensor Plate

Size: 65.00 x 65.00 x 1.30 mm [2.56" x 2.56" x 0.05"]

Part Number: VTPCVP - 1

VTEP Polarity Check Vertical Amplifier Package

Consists of:• 1 Amplifier Board• 2 Polarity Check Probes: FC 1001 NB03 N• 2 Sockets / Receptacles: RCP066 WR13

Part Number: VTPCSP - 1

Sensor Plate for VTEP Polarity Check

Size: 6.30 x 3.70 mm[0.248" x 0.147"]

Part Number: VTPCSP - 2

Sensor Plate for VTEP Polarity Check

Size: 7.60 x 4.90 mm[0.298" x 0.191"]

Ope

ns T

esti

ng P

rodu

cts

Ope

ns T

esti

ng P

rodu

cts

VTEP

Par

ts

VTEP

Par

ts

Fixture Customizing Fixture Customizing


AC

TUA

L S

IZE

AC

TU

AL

SIZ

E

137 138

Fixture Customizing Open Xpress for Genrad FrameScan Plus for Teradyne Fixture Customizing

Part Number: OEOFM

OFM Card

Consists of:• 1 OFM card• Connectors• Ribbon Cable

Part Number: OEOXP - 1

OX Sensor Connection Board Package

Consists of:• 1 sensor connection board• 2 Probes FC 1000 NB03• 2 Sockets / Receptacles: RCP066 WR46

Part Number: OESP - 1

Sensor PlateSize: 12.00 x 9.50 x 1.30 mm

[0.475" x 0.375" x 0.05"]


Sensor Plate

Size: 14.60 x 10.80 x 1.30 mm[0.575" x 0.425" x 0.05"]


Sensor Plate

Size: 31.80 x 31.80 x 1.30 mm[1.25" x 1.25" x 0.05"]


Sensor Plate

Size: 65.00 x 65.00 x 1.30 mm [2.56" x 2.56" x 0.05"]


Sensor Plate


Part Number: FSPMUX - 1

FrameScan Plus MUX CardConsists of:• 1 FrameScan FX 2.0 Selector Board (MUX Card)• Connectors• Ribbon Cable

Part Number: FSPAP - 1

FrameScan Amplifier PackageConsists of:• 1 Amplifier Board• 2 Probes: FC1000 RS03 S• 2 Sockets / Receptacles: RCP066 WR46

Part Number: FSPSP - 1

Size: 12.00 x 9.50 x 1.30 mm[0.475" x 0.375" x 0.05"]


Sensor Plate

Size: 14.60 x 10.80 x 1.30 mm[0.575" x 0.425" x 0.05"]


Sensor Plate

Size: 31.80 x 31.80 x 1.30 mm[1.25" x 1.25" x 0.05"]


Sensor Plate

Size: 65.00 x 65.00 x 1.30 mm [2.56" x 2.56" x 0.05"]


Sensor Plate


Ope

ns T

esti

ng P

rodu

cts

Ope

ns T

esti

ng P

rodu

cts

Ope

n X

pres

s

Fram

eSca

n P

lus

Par

ts


AC

TUA

L S

IZE

139 140

Fixture Customizing FrameScan Plus for Teradyne FrameScan FX for Teradyne Fixture Customizing

Part Number: CSVP - 1

CapScan Vertical Amplifier Package

Consists of:• 1 Amplifier Board• 2 Probes: FC 1001 NB03 N• 2 Sockets / Receptacles: RCP066 WR13

Part Number: CSSP -1

CapScan Sensor Plate

Size: 6.30 x 3.70 mm[0.248" x 0.147"]

Part Number: CSSP - 2

CapScan Sensor Plate

Size: 7.60 x 4.90 mm[0.298" x 0.191"]

Part Number: FSPMUX - 2

FX/FrameScan Plus MUX Card

Consists of:• 1 FrameScan FX 2.0 Selector Board• Connectors• Ribbon Cable

Part Number: FSPAP - 1FX FrameScan Amplifier PackageConsists of:• 1 Amplifier Board• 2 Probes: FC1000 RS03 S• 2 Sockets / Receptacles: RCP066 WR46


Sensor PlateSize: 12.00 x 9.50 x 1.30 mm

[0.475" x 0.375" x 0.05"]


Sensor Plate

Size: 14.60 x 10.80 x 1.30 mm[0.575" x 0.425" x 0.05"]


Sensor Plate

Size: 31.80 x 31.80 x 1.30 mm[1.25" x 1.25" x 0.05"]


Sensor Plate

Size: 65.00 x 65.00 x 1.30 mm [2.56" x 2.56" x 0.05"]


Sensor Plate


AC

TU

AL

SIZ

EO

pens

Tes

ting

Pro

duct

s

Ope

ns T

esti

ng P

rodu

cts

Fram

eSca

n P

lus

Fram

eSca

n FX


Centers ≥ 100 Mil / 2.54 mm

IC Series Interface Contacts

IC S

erie

sIn

terf

ace

Con

tact

s ▪ ≥

100

Mil

/ 2.

54 m

mA

CT

UA

L S

IZE ≡ Contact Terminals Ordering Code Example

IC085 N WR 0 5a

a: Series

WR = Wire -Wrapped SR = Solderable

≡ Contact Terminals Ordering Code Example

IC085 N WR 0 7a

a: Series



Material: Brass - Hard Gold or Rhodium Plated


Interface Contacts are used to ensure reliable connection between ITA and Receiver Parts of the Test Systems. Typical applications are "Pylon Type" Interface connections, Mint Pins or other Interface Probe counterparts in an ITA - Test Fixture side.

IC071 WR16 ; IC 071 WR03 ; IC071 WR09 for Pylon-Block-Type Mass-Interconnect Applications.

142

AC

TUA

L S

IZE

Centers ≥ 100 Mil / 2.54 mm

Interface Contacts IC Series

IC S

erie

sIn

terf

ace

Con

tact

s ▪ ≥

100

Mil

/ 2.

54 m

m

IC071 WR16

Installation Height: 0.80 mm [0.031]

Current: 10 Amps

Material: Brass

Plating: Hard Gold

IC118 SR03


Current: 10 Amps

Material: Brass

Plating: Hard Gold

IC085 WR07


Current: 10 Amps

Material: Brass

Plating: Hard Gold

IC085 WR08


Current: 10 Amps

Material: Brass

Plating: Hard Gold

IC085 QE03


Current: 15 Amps

Material: Brass

Plating: Hard Gold

IC085 WR05


Current: 10 Amps

Material: Brass

Plating: Hard Gold

IC085 SR04


Current: 20 Amps

Material: Brass

Plating: Hard Gold

IC085 SR03


Current: 20 Amps

Material: Brass

Plating: Hard Gold

IC085 SR05


Current: 15 Amps

Material: Brass

Plating: Hard Gold

IC085 SR06


Current: 20 Amps

Material: Brass

Plating: Hard Gold

IC071 WR03


Current: 10 Amps

Material: Brass

Plating: Hard Gold

IC071 WR09


Current: 10 Amps

Material: Brass

Plating: Hard Gold


IC & RF Series Interface Contacts

IC &

RF

Ser

ies

Inte

rfac

e C

onta

cts

AC

TU

AL

SIZ

E

≡ Contact Terminals Ordering Code Example ≡ RF Contact Terminals Ordering Code Example

IC085 WR 0 5a

IC197 MCX03a

a: Series


a: Series

IC157R SR03


Current: 30 Amps

Material: Brass

Plating: Rhodium

IC085 WR03

Installation Height: 12 mm [0.472]

Current: 10 Amps

Material: Brass

Plating: Hard Gold

IC138 SR03


Current: 30 Amps

Material: Brass

Plating: Hard Gold

IC169 - M303


Current: 50 Amps

Material: Brass

Plating: Hard Gold

IC197 MCX03


Material: Brass

Plating: Hard Gold

IC236 MCX03


Material: Brass

Plating: Hard Gold

MA

RK

ING

UN

IT

Marking Unit Fixture Customizing

Mar

king

Uni

t

RF Interface Contacts

Marking Unit MU S001 D2 M12x1

The Marking Units made by Equip-Test offer exceptional durability and universal usage for ICT, FCT, EOL and any other types of Test Fixtures. Easy placement assembly and flexibility in regard to height adjustment makes this product attractive and popular in all application areas.

Because the outer thread covers the entire length, this makes adjustment very easy. The Marking bit itself is easily exchangeable, and this ensures a high product life-expectancy and high ROI numbers.

The design allows permanent marking of not only PC-Boards but also all types of materials such as G10/FR4, CEM-1, Plastics, Acrylic and Aluminium.

Fields of Applications:

• PCB test ICT and FT

• Test Adaptors

Customer Benefits:

• Compact design

• Easy integration in existing systems

• Optimal positioning

• Height-adjustability

• Exchangeable Marking Unit

• Spring-loaded Marking Pin

• Wide range of applications

Replacing the Marking Pin

The replacement kit (which consists of a spring, pin and lock) can be exchanged in the event of wear (Order No. RK - MU S001). To dismantle the Pin is remove with a pair of pliers. Assemble the new parts in the replacement kit according to the sketch. For this purpose we also supply an insertion tool (order no. TRK - MU S001), which presses the lock into the gearshaft drill hole.

Mechanical Data

Full Travel 2.00 mm

Working Travel 1.50 mm

Pre-Loaded Spring Force 0.55 N

Spring Force at Working Travel 3.10 N

Marked Area � 2.0 mm

Recommended Marking Impulse ca. 1 s

Electrical Data

Max. Current Rating 3.0 A

Typical Continuity Resistance ≤ 30 mOhm

Rated Voltage 12 V

Output 0.75 W

No-Load Current 3.7 mA

Starting Current 106 mA

Max. Permanent Load Current 81 mA

Terminal Resistance 114 Ohm

Pin no-load Speed 180 min-1

Max. Pin Torque 54 mNm

Materials

Needle Material Solid Carbide

External Thread M12x1 with wrench size SW11

144

MCX = with connection for MCX


PIC Pneumatic Interface Contacts

PIC

Pne

umat

ic In

terf

ace

Con

tact

sA

CT

UA

L S

IZE ≡ Pneumatic Contact Terminals Ordering Code Example

PIC 3150a

a: Series

PIC3150 for ITAMaterial: BrassPlating: Hard GoldPressure / Vacuum Rated: 232 psi (16 Bar)Note: Without valve

PIC3230 for ITAMaterial: DelrinPressure / Vacuum Rated: 100 psi (6.9 Bar)Note: Without valve

PIC3231 for ReceiverMaterial: DelrinPressure / Vacuum Rated: 100 psi (6.9 Bar)Note: With valve

PIC3151 for ReceiverMaterial: BrassPlating: Hard GoldPressure / Vacuum Rated: 232 psi (16 Bar)

Note: Without valve

VPC Signal & Pneumatic Interface Modules

Reconfigurable Integrated Interface Connector Modules

Receiver 510 160 101


ITA 610 110 108

Receiver 610 110 101ITA 510 161 101

24 pos Mini Coax / Power(up to 65 A)

Mini Power ContactREC 610 116 112ITA 610 115 124

Micro Power ContactREC 610 142 101ITA 610 143 101

Mini Pneumatic ContactREC 610 131 108ITA 610 132 106

Without valve

Mini Coax Contact REC 610 104 114

ITA 610 103 115

40 pos Micro Coax / Power(up to 21 A)

100 / 8 pos Signal Mini

Power / Coax

24 / 30 pos Signal Micro Power / Coax

ITA 610 138 109


ITA 510 161 108

QuadraPaddle iCon Signal Modules

TriPaddle iCon Signal Modules

Power, Coaxial and Hybrid iCon Connectors Sample Contacts:

Sample Contacts:Operating current 5 A ▪ up to 160 pins

Operating current 7 - 10 A ▪ up to 96 pins

VPC

MO

DU

LES

VPC

Mod

ules

Sig

nal,

Pow

er, C

oax

& P

neum

atic

Mod

ules

∆ For more Technical information and Customized Solutions consult us at: [email protected]

These high-quality modular Interface Connector Modules (so-called iCons) offer an exceptional signal quality when connecting/contacting Test Fixtures (ITA) with Functional or ICT Test Systems (Receiver). Because there is no spring force applied then a minimum of 10,000 cycles is guaranteed. Note: Allows mixing of I/O and Hybrid Modules.

Technical Summary:• Low I / O • Hybrid applications• 10.000 connection / disconnection• Contacts:• Power, Pneumatic, Coax and Signal Contacts


Interface Blocks

Signal Interface Blocks

Inte

rfac

e B

lock

sInterface Blocks

High-current Signal & Pneumatic Interface Blocks

Inte

rfac

e B

lock

s

Sig

nal I

nter

face

Blo

cks

Hig

h-cu

rren

t &

Pne

umat

ic In

terf

ace

Blo

cks

40 Pole Signal Receiver Pylon Block


8 Pole High-current Receiver Pylon Block



40 Pole Low Resistance Signal Receiver Pylon Block


170 Pole Signal Low Resistance Receiver Pylon Block

8 Pole Pneumatic Receiver Pylon Block

8 Pole Pneumatic Receiver Pylon Block



85 Pole Signal ITA Pylon Block

8 Pole High-current ITA Pylon Block




Mixed ITA Pylon Block

Mixed Receiver Pylon Block


8 Pole Penumatic ITA Pylon Block

Pole Penumatic ITA Pylon Block



≡ Interface Blocks Ordering Code Example

RCV ST 170 Signal Receiver Pylon Blocka b c d

a: Series b: Current c: Number of Poles d: Type No.

ST = Signal HC = High-current PN = Pneumatic LR = Low-Resistance RF = Radio-Frequency OP = Optical

≡ Interface Blocks Ordering Code Example

ITA ST 170 KT06 Signal ITA Pylon Blocka b c d

a: Series b: Current c: Number of Poles d: Type No.

ST = Signal HC = High-current PN = Pneumatic LR = Low-Resistance RF = Radio-Frequency OP = Optical

Order Code: RCV-HC-8Test Probe: HCT2000 HK03 N

Socket / Receptacle: RCT157 SR03

Order Code: RCV-HC-45Test Probe: HCT1600 HK03 M


Order Code: RCV-HC-4Test Probe: HCT2000 HK03 N


Order Code: RCV-ST-40Test Probe: IT1000 1ER03 S

Socket / Receptacle: RCP066 WR46



Order Code:RCV-ST-170Test Probe: IT1000 1ER03 S


Order Code: RCV-ST-LR-40Test Probe: HC1000 HK04 S

Socket / Receptacle: RCP 079 WR03



Order Code: RCV-ST-LR-170Test Probe: HC1000 HK04 S

Socket / Receptacle: RCP 079 WR03

Order Code: RCV-HC-24Test Probe: HCT1600 HK03 M


Order Code: RCV-PN-FES-8Pneumatic Contact - Receiver:

PIC3151

Order Code: RCV-PN-VPC-8Pneumatic Contact - Receiver:

PIC3231

Order Code: ITA-HC-45Contact: IC085 SR07

Order Code: ITA-HC-4Contact: IC169 M303

Order Code: ITA-HC-8Contact: IC169 M303

Order Code: ITA-ST-85-KT06Contact: IC071 WR09



Order Code: ITA-MB-ST/HC/PN-32/8/4 Signal Contact: IC071 WR09

High-Current Contact: IC138 SR03 Pneumatic Contact: PIC3150

Order Code: RCV-MB-ST/HC/PN-32/8/4 Signal Contact: IT1000 1ER03 S

Socket / Receptacle: RCP066 WR6High-Current Contact: HCT1600 HK03 LX

Socket / Receptacle: RCT118 SR03Pneumatic Contact: PIC3151


Order Code: ITA-HC-24Contact: IC085 SR07

Order Code: ITA-PN-FES-8Pneumatic Contact - ITA:

PIC3150

Order Code: ITA-PN-VPC-8Pneumatic Contact - ITA:

PIC3230


AC

TUA

L S

IZE


HC1000 High-current Probes up to 16 A Tip Styles HC1000H

C10

00

HC

1000

Hig

h-cu

rren

t P

robe

s ▪ 1

00 M

il /

2.54

mm

Hig

h-cu

rren

t P

robe

s ▪ 1

00 M

il /

2.54

mm

AC

TU

AL

SIZ

E

149 150


Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

CC 5 3 - 1.30 0.051

CG

0 4 - 1.60 0.063

0 5 - 1.80 0.071

0 6 - 2.00 0.079

0 7 - 2.50 0.098

HK 5 5 - 2.00 0.079

RA

0 5 - 1.00 0.039

0 6 S 2.00 0.079

TA 0 3 - 2.00 0.079

Plunger Plating

Code Material

No letter Hard Gold

S Silver

Recommended Socket / Receptacle Series for High-current Probes HC1000 is RCP079.See Page 73 - 74 for detailed information.


HC1000 S CG 0 6 La b c d e f g




Code Rated force

(N) [oz]

M 1.50 5.4

L 2.20 7.9

X 3.00 10.8

Plunger Material

Code Material

0 BeCu

5 Steel






Barrel Material: Brass - Gold Plated / Brass - Silver Plated

Spring Material: SUS / Spring Steel Gold Plated




These High-current Probes are designed to withstand High-cur-rents up to 16 Amps AC/DC. High pointing accuracy and long-life expectancy are basic features for this Probe series. All Tip-styles have an engraved "O" ring at the bottom part of the tip, to allow easy recognition. (Note: This is necessary because other-wise their different design is not noticeable externally).

Applicable for:

• Functional Testing • Burn-in Testing• Power Supply Testing


Tool for HC1000 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*




TH1 TBP10000 TBP10035 TBP10070



RCP079 N SR04x y z

Code Material

No letter Hard Gold



For detailed Sockets / Receptacles for HC1000 See Page 73 - 74.



RCP079 SR04



Material: Brass

Plating: Hard Gold


- has to be chosen*

Handle TH1







151 152

AC

TUA

L S

IZE


HC1001 High-current Probes up to 16 A High-current Probe up to 16 A HC1002H

C10

01

HC

1002

AC

TU

AL

SIZ

E


Tip Diameter

Code

Tip Diameter

mm [inches]

CC 5 3 1.30 0.051

CG0 6 2.00 0.079

0 7 2.50 0.098


Tip Diameter

Code

Tip Diameter

mm [inches]

CG0 6 2.00 0.079

0 7 2.50 0.098

HK 0 4 1.75 0.069

Plunger Plating

Code Material

No letter Hard Gold

Recommended Socket / Receptacle Series for High-current Probes HC1001 is RCP079.See Page 73 - 74 for detailed information.

Recommended Socket / Receptacle Series for High-current Probes HC1002 is RCP079.



HC1001 N CG 0 6 Xa b c d e f g




Code Rated force

(N) [oz]

M 1.50 5.4

L 2.20 7.9

X 3.00 10.8


Code Rated force

(N) [oz]

M 1.50 5.4

L 2.20 7.9

X 3.00 10.8

Plunger Material

Code Material

0 BeCu

These High-current Probes are designed to withstand High-currents up to 16 Amps AC/DC. High pointing accuracy and long-life expectancy are basic features for this Probe series. All Tip-styles have an engraved "O" ring at the bottom part of the tip, to allow easy recognition. (Note: This is necessary because otherwise their different design is not noticeable externally).

Applicable for:



Recommended Working Stroke: 4.00 mm [0.157]Full Stroke: 5.30 mm [0.209]Max. Current: 16 A (continuous)Average Resistance: max. 10 mΩBarrel Material: Brass - Gold Plated / Brass - Silver PlatedSpring Material: SUS / Spring Steel Gold Plated



Plunger Plating

Code Material

No letter Hard Gold


HC1002 N CC 5 3 La b c d e f g



Plunger Material

Code Material

5 Steel








Handle TH1



TBP10070



Handle TH1



TBP10070


Hig

h-cu

rren

t P

robe

s ▪ 1

00 M

il /

2.54

mm

Hig

h-cu

rren

t P

robe

s ▪ 1

00 M

il /

2.54

mm


Applicable for:





AC

TUA

L S

IZE


HC1003 High-current Probes up to 16 A High-current Probes up to 16 A HC1004H

C10

03

HC

1004

AC

TU

AL

SIZ

E


Tip Diameter

Code

Tip Diameter

mm [inches]

CG 0 6 2.00 0.079

HK 0 5 2.00 0.079


Tip Diameter

Code

Tip Diameter

mm [inches]

CG

0 5 1.80 0.071

0 6 2.00 0.079

0 7 2.50 0.098

HK0 4 1.75 0.069

0 5 2.00 0.079

Plunger Plating

Code Material

No letter Hard Gold


HC1003 N HK 0 5 Ma b c d e f g



Plunger Material

Code Material

0 BeCu

Plunger Material

Code Material

0 BeCu




Plunger Plating

Code Material

No letter Hard Gold


HC1004 N HK 0 5 Ma b c d e f g




Recommended Working Stroke: 4.00 mm [0.157]Full Stroke: 5.30 mm [0.209]Max. Current: 16 A (continuous)Average Resistance: max. 10 mΩBarrel Material: Brass - Gold Plated / Brass - Silver PlatedSpring Material: SUS / Spring Steel Gold PlatedOperating Temperature: - 100 °C up to + 200 °C

[- 148 °F up to + 392 °F]


Applicable for:




Installation HeightsInstallation Heights


Handle TH1



TBP10070


Handle TH1



TBP10070



Applicable for:


Hig

h-cu

rren

t P

robe

s ▪ 1

00 M

il /

2.54

mm

Hig

h-cu

rren

t P

robe

s ▪ 1

00 M

il /

2.54

mm


Recommended Socket / Receptacle Series for High-current Probes HC1003 is RCP079. See Page 73 - 74 for detailed information.



Code Rated force

(N) [oz]

M 1.50 5.4

L 2.20 7.9

X 3.00 10.8


Code Rated force

(N) [oz]

M 1.50 5.4

L 2.20 7.9

X 3.00 10.8


AC

TUA

L S

IZE



C10

05

HC

1007

AC

TU

AL

SIZ

E


Tip Diameter

Code

Tip Diameter

mm [inches]

TA 0 3 2.00 0.079


Tip Diameter

Code

Tip Diameter

mm [inches]

CC 5 3 1.30 0.051

Plunger Plating

Code Material

No letter Hard Gold


HC1005 N CC 5 3 La b c d e f g




Code Rated force

(N) [oz]

M 1.50 5.4

L 2.25 8.1

X 3.00 10.8

Plunger Material

Code Material

0 BeCu


Applicable for:






Average Resistance: max. 10 mΩBarrel Material: Brass - Gold Plated / Brass - Silver PlatedSpring Material: SUS / Spring Steel Gold Plated


Plunger Plating

Code Material

No letter Hard Gold


HC1007 N TA 0 3 La b c d e f g




Applicable for:






Average Resistance: max. 10 mΩBarrel Material: Brass - Gold Plated / Brass - Silver PlatedSpring Material: SUS / Spring Steel Gold Plated


Plunger Material

Code Material

5 Steel

≡ Tip Diameter Code changes according to the Tip Style.≡ Tip Diameter Code changes according to the Tip Style.



Handle TH1



TBP10070


Handle TH1



TBP10070


Hig

h-cu

rren

t P

robe

s ▪ 1

00 M

il /

2.54

mm

Hig

h-cu

rren

t P

robe

s ▪ 1

00 M

il /

2.54

mm





Code Rated force

(N) [oz]

M 1.50 5.4

L 2.25 8.1

X 3.00 10.8


157 158

AC

TUA

L S

IZE



C10

08

HC

1033

AC

TU

AL

SIZ

E


Tip Diameter

Code

Tip Diameter

mm [inches]

CG 0 6 2.00 0.079

TB 0 3 2.00 0.079


Tip Diameter

Code

Tip Diameter

mm [inches]

CG0 5 1.80 0.071

0 7 2.50 0.098

Plunger Plating

Code Material

No letter Hard Gold


HC1008 N CG 0 6 La b c d e f g




Code Rated force

(N) [oz]M 1.50 5.4

L 2.25 8.1

X 3.00 10.8

Plunger Material

Code Material

0 BeCu


Applicable for:





≡ Tip Diameter Code changes according to the Tip Style.≡ Tip Diameter Code changes according to the Tip Style.

Plunger Plating

Code Material

No letter Hard Gold






Code Rated force

(N) [oz]

X 3.00 10.8


Applicable for:



Recommended Working Stroke: 4.00 mm [0.157]Full Stroke: 5.30 mm [0.209]Max. Current: 16 A (continuous)Average Resistance: max. 10 mΩBarrel Material: Brass - Gold PlatedSpring Material: SUS / Spring Steel Gold Plated


Plunger Material

Code Material

0 BeCu





Handle TH1



TBP10070


Handle TH1



TBP10070


Hig

h-cu

rren

t P

robe

s ▪ 1

00 M

il /

2.54

mm

Hig

h-cu

rren

t P

robe

s ▪ 1

00 M

il /

2.54

mm





AC

TUA

L S

IZE



C16

00

HC

1600

Hig

h-cu

rren

t P

robe

s ▪ 1

60 M

il /

4.00

mm

Hig

h-cu

rren

t P

robe

▪ 16

0 M

il /

4.00

mm

AC

TU

AL

SIZ

E


Tip Diameter

Code

Tip Diameter

mm [inches]

CG

0 3 2.30 0.091

0 4 3.00 0.118

0 5 4.00 0.157

RA 0 5 2.30 0.091

TA 0 3 3.00 0.118

Plunger Plating

Code Material

No letter Hard Gold


Code Rated force

(N) [oz]

M 1.50 5.4

L 2.20 7.9

X 3.00 10.8

U 5.00 18.0

Plunger Material

Code Material

0 BeCu





Average Resistance: max. 10 mΩBarrel Material: Brass - Gold Plated






Applicable for:

• Functional Testing• Burn-in Testing• Power Supply Testing





-

TH1 TBP16000 - TBP16070




For detailed Sockets / Receptacles for HC1600 See Page 99.


RCP118 N WR05x y z

Code Material

No letter Hard Gold









RCP118 WR05



Material: Brass

Plating: Hard Gold


- has to be chosen*

Handle TH1







AC

TUA

L S

IZE



C16

01

HC

1602

AC

TU

AL

SIZ

E


Tip Diameter

Code

Tip Diameter

mm [inches]

CG 0 4 3.00 0.118


Tip Diameter

Code

Tip Diameter

mm [inches]

CG0 4 3.00 0.118

0 5 4.00 0.728

Plunger Plating

Code Material

No letter Hard Gold










Code Rated force

(N) [oz]

X 3.00 10.8

U 5.00 18.0

Plunger Material

Code Material

0 BeCu


Applicable for:









Plunger Plating

Code Material

No letter Hard Gold


HC1602 N CG 0 4 Ma b c d e f g




Code Rated force

(N) [oz]

M 1.50 5.4

X 3.00 10.8


Applicable for:









Plunger Material

Code Material

0 BeCu

Installation HeightInstallation Height


Handle TH1



TBP16070


Handle TH1



TBP16070


Hig

h-cu

rren

t P

robe

s ▪ 1

60 M

il /

4.00

mm

Hig

h-cu

rren

t P

robe

▪ 16

0 M

il /

4.00

mm




AC

TUA

L S

IZE



C16

08

HC

1608

AC

TU

AL

SIZ

E


Tip Diameter

Code

Tip Diameter

mm [inches]

CG0 3 2.30 0.091

0 4 3.50 0.138

Plunger Plating

Code Material

No letter Hard Gold




HC1608 N CG 0 3 Ma b c d e f g




Code Rated force

(N) [oz]

M 1.50 5.4

Plunger Material

Code Material

0 BeCu






Spring Material: SUS





Applicable for:


RCP118 SR03



Material: Brass

Plating: Hard Gold

Installation Height





-

TH1 TBP16000 - TBP16070



- has to be chosen*

Handle TH1





SR1604 Spacer Ring SR1605 Spacer Ring

SR1606 Spacer Ring


Hig

h-cu

rren

t P

robe

s ▪ 1

60 M

il /

4.00

mm

Hig

h-cu

rren

t P

robe

▪ 16

0 M

il /

4.00

mm



RCP118 N SR03x y z

Code Material

No letter Hard Gold




AC

TUA

L S

IZE



C20

00

HC

2000

Hig

h-cu

rren

t P

robe

s ▪ 2

00 M

il /

5.08

mm

Hig

h-cu

rren

t P

robe

s ▪ 2

00 M

il /

5.08

mm

AC

TU

AL

SIZ

E


Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

CG 0 4 - 4.00 0.157

FA 0 3 - 4.00 0.157

HK 0 3 - 3.00 0.118

RE 0 3 S 4.00 0.157

TA 0 3 - 4.00 0.157

Plunger Plating

Code Material

No letter Hard Gold

S Silver


HC2000 S CG 0 4 La b c d e f g




Code Rated force

(N) [oz]

L 3.00 10.8

X 5.00 18.0

Plunger Material

Code Material

0 BeCu




Max. Current: 50 A (for short loads up to 80 A)







Applicable for:


RCP157 SR03



Material: Brass

Plating: Hard Gold


RCP157 N SR03x y z



Installation Height





-

TH1 TBP20000 - TBP20070



- has to be chosen*

Handle TH1





RCP157 M3



Material: Brass

Plating: Hard GoldRecommended Socket / Receptacle Series for

High-current Probes HC2000 is RCP157. See Page 166 for detailed information.



Hig

h-cu

rren

t P

robe

s ▪ 2

00 M

il /

5.08

mm

Installation Height

167 168

AC

TUA

L S

IZE



C20

01

HC

2001

AC

TU

AL

SIZ

E


Tip Diameter

Code

Tip Diameter

mm [inches]

CG 0 4 4.00 0.157

Plunger Plating

Code Material

No letter Hard Gold


HC2001 N CG 0 4 La b c d e f g




Code Rated force

(N) [oz]

L 3.00 10.8

X 5.00 18.0

Plunger Material

Code Material

0 BeCu




Max. Current: 50 A (for short loads up to 80 A)







Applicable for:


Recommended Socket / Receptacle Series for High-current Probes HC2001 is RCP157. See Page 168 for detailed information.


RCP157 N SR03x y z







-

TH1 TBP20000 - TBP20070



- has to be chosen*

Handle TH1





Hig

h-cu

rren

t P

robe

s ▪ 2

00 M

il /

5.08

mm


RCP157 SR03



Material: Brass

Plating: Hard Gold

RCP157 M3



Material: Brass

Plating: Hard Gold


C

169 170

AC

TUA

L S

IZE

Centers 75 Mil / 1.91 mm 2.6 mm [0.102] Switching Path

SW750 Switch Probes Tip Styles SW750S

W75

0

SW

750

Sw

itch

Pro

bes ▪ 7

5 M

il /

1.91

mm

Sw

itch

Pro

bes ▪ 7

5 M

il /

1.91

mm

AC

TU

AL

SIZ

E


Tip Diameter

Code

Tip Diameter

mm [inches]

CG 0 3 0.80 0.031

FA 0 3 0.80 0.031

Recommended Socket / Receptacle Series for Switch Probes SW750 is RCP052.



SW750 N CG 0 3 Sa b c d e f g



Spring Force at Switching Point

Code Rated force

(N) [oz]

S 1.50 5.4

Plunger Material

Code Material

0 BeCu




Switching path: 2.60 mm [0.102] ± 0.2 [0.008]



Barrel Material: Phosphor Bronze / Beryllium Copper / Nickel Silver




Switch Probes are actually micro-switches, and have different switching paths. The repeatable switching path ensures the quality of our Switch Probes.

Typical applications for this type of product are:

• Test fixture closed-cover and/or UUT (Unit Under Test) sensing

• Automatic start of test when DUT is placed on to the fixture • Placed under Probes with through-hole continuous Plunger

for “circuit closed”• Component and Connector Pin Presence Check

RCP052 NR09



Material: Bronze

Plating: Hard Gold

RCP0

52 N

R09

Installation Height


Tool for SW750 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*




-

TH1 TBP7500 - TBP7570



- has to be chosen*

Handle TH1





Plunger Plating

Code Material

No letter Hard Gold



RCP052 N NR09x y z

Code Material

No letter Hard Gold



ON OFF


AC

TUA

L S

IZE



W10

00

SW

1000

AC

TU

AL

SIZ

E


Tip Diameter

Code

Tip Diameter

mm [inches]

CG 5 3 1.00 0.039

RA 5 3 0.65 0.025


SW1000 N CG 5 3 Sa b c d e f g




Code Rated force

(N) [oz]

S 2.00 7.2

Plunger Material

Code Material

5 Steel
















RCP066 CR05





Plating: Hard Gold

RCP0

66 C

R05

Installation Height






TH1 TBP10000 TBP10035 TBP10070



- has to be chosen*

Handle TH1





Plunger Plating

Code Material

No letter Hard Gold






RCP066 N CR05x y z

Code Material

No letter Hard Gold



Sw

itch

Pro

bes ▪ 1

00 M

il /

2.54

mm

Sw

itch

Pro

bes ▪ 1

00 M

il /

2.54

mm

ON OFF


AC

TUA

L S

IZE



W10

01

SW

1001

AC

TU

AL

SIZ

E


Tip Diameter

Code

Tip Diameter

mm [inches]

IW 9 3 1.50 0.059

CG 5 3 1.30 0.051

FA 5 3 0.80 0.031

TA 5 3 1.50 0.059

Plunger Plating

Code Material

No letter Hard Gold


SW1001 N CG 5 3 Ma b c d e f g




Code Rated force

(N) [oz]

M 1.50 5.4











RCP079 NR04



Material: Brass

Plating: Hard Gold






TH1 TBP10000 TBP10035 TBP10070






Handle TH1


- has to be chosen*

Plunger Material

Code Material

5 Steel

9 Plastic







Sw

itch

Pro

bes ▪ 1

00 M

il /

2.54

mm

Sw

itch

Pro

bes ▪ 1

00 M

il /

2.54

mm




RCP079 N NR04x y z

Code Material

No letter Hard Gold



For detailed Sockets / Receptacles for SW1001 see Page 177.


ON OFF

RCP079 SR03


AC

TUA

L S

IZE

175 176



W10

02

SW

1002

AC

TU

AL

SIZ

E


Tip Diameter

Code

Tip Diameter

mm [inches]

IW 9 3 1.50 0.059

CG 5 3 1.30 0.051

FA 5 3 0.80 0.031

TA 5 3 1.50 0.059

Plunger Plating

Code Material

No letter Hard Gold


SW1002 N CG 5 3 Ma b c d e f g




Code Rated force

(N) [oz]

M 1.00 3.6

Plunger Material

Code Material

5 Steel

9 Plastic





Max. Current: 3A (continuous)











TH1 TBP10000 TBP10035 TBP10070







Sw

itch

Pro

bes ▪ 1

00 M

il /

2.54

mm

Sw

itch

Pro

bes ▪ 1

00 M

il /

2.54

mm


RCP079 N NR04x y z

Code Material

No letter Hard Gold



For detailed Sockets / Receptacles for SW1002 see Page 179.





ON OFF

RCP079 NR04



Material: Brass

Plating: Hard Gold






- has to be chosen*

Handle TH1

RCP079 SR03


AC

TUA

L S

IZE



W14

00

SW

1400

Sw

itch

Pro

bes ▪ 1

40 M

il /

3.50

mm

Sw

itch

Pro

bes ▪ 1

40 M

il /

3.50

mm

AC

TU

AL

SIZ

E


Tip Diameter

Code

Tip Diameter

mm [inches]

CG 5 5 2.30 0.090

FA 5 3 1.80 0.071

IW9 4 3.00 0.118

9 6 5.00 0.197

Plunger Plating

Code Material

No letter Hard Gold




SW1400 N CG 5 5 XSa b c d e f g




Code Rated force

(N) [oz]

XS 2.30 8.3

Plunger Material

Code Material

5 Steel

9 Plastic










Installation Height

Quick wire change solution.


RCP118 SR06



Material: Brass

Plating: Hard Gold

*Note: The Receptacle can be used from Grid 4.50 mm (177 Mil) up.





TH1 TBP16000 TBP16035 TBP14070



- has to be chosen*

Handle TH1





PLG1019

Material: Brass








RCP118 N SR06x y z

Code Material

No letter Hard Gold



ON OFF




AC

TUA

L S

IZE


SWO1400 Switch Probes Openers Tip Styles SWO1400S

WO

1400

SW

O14

00

Sw

itch

Pro

bes ▪ 1

40 M

il /

3.50

mm

Sw

itch

Pro

bes ▪ 1

40 M

il /

3.50

mm

AC

TU

AL

SIZ

E

Plunger Plating

Code Material

No letter Hard Gold


SWO1400 N 3CK 5 3 Na b c d e f g




Code Rated force

(N) [oz]

N 2.30 8.3

Plunger Material

Code Material

5 Steel

9 Plastic









Connector Pin Diameter: 0.50 mm [0.020]

Connector Pin Length: 6.00 mm [0.236]


Installation Height

Tool for SWO1400 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*




-

TH1 TBP16000 - TBP14070



- has to be chosen*

Handle TH1





Switch Probe Openers are actually micro-switches, with normally closed circuits. The repeatable switching path ensures the quality of our Switch Probes Openers.



• Automatic start of test when DUT is placed on to the fixture

• Placed under Probes with through-hole continuous Plunger for “circuit closed”

• Component and Connector Pin Presence Check


Recommended Socket / Receptacle Series for Switch Probes SWO1400 is RCP118.




Tip Diameter

Code

Tip Diameter

mm [inches]

CG 5 3 2.30 0.090

3CK 5 3 1.00 0.039

IW

9 3 3.00 0.118

9 4 4.00 0.157

9 5 5.00 0.197


RCP118 N SR06x y z

Code Material

No letter Hard Gold



ONOFF

RCP118 SR06



Material: Brass

Plating: Hard Gold


PLG1019

Material: Brass




AC

TUA

L S

IZE


NRSW1400 Non-Rotating Switch Probes Tip Styles NRSW1400N

RS

W14

00

NR

SW

1400

AC

TU

AL

SIZ

E

Plunger Plating

Code Material

No letter Hard Gold


NRSW1400 N WC 5 3 XSa b c d e f g




Code Rated force

(N) [oz]

XS 2.30 8.3

Plunger Material

Code Material

5 Steel









Connector Pin Diameter: 0.50 mm 0.020]



RCP1

18 S

R06

Installation Height

Tool for NRSW1400 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*




TH1 TBP16000 TBP16035 TBP14070



- has to be chosen*

Handle TH1





Non-Rotating Switch Probes are actually micro-switches, with different switching paths and non-rotating plunger tips. The repeatable quality of our Switch Probes ensures our customers satisfaction. They are secured against tip rotation in order to allow reliable entrance into a flat-hole connector housing.

Typical application:

• Component Presence Check of angled flat-connector housing

Non

-Rot

atin

g S

wit

ch P

robe

s ▪ 1

40 M

il /

3.50

mm

Non

-Rot

atin

g S

wit

ch P

robe

s ▪ 1

40 M

il /

3.50

mm

Recommended Socket / Receptacle Series for Non-Rotating Switch NRSW1400 is RCP118.




RCP118 N SR06x y z

Code Material

No letter Hard Gold




Tip Diameter

Code

Tip Diameter

mm [inches]

WC 5 3 1.90 X 1.00 0.075 X 0.039

WD 5 3 4.00 X 0.65 0.118 X 0.026


ON OFF


RCP118 SR06



Material: Brass

Plating: Hard Gold

PLG1019

Material: Brass




AC

TUA

L S

IZE

Centers 300 mil / 7.50 mm 0.50 mm [0.020] Switching Path

SWTB2560 Ball-Head Switch Probes Tip Styles SWTB2560S

WTB

2560

SW

TB25

60

Sw

itch

Pro

bes ▪ 3

00 m

il /

7.50

mm

Sw

itch

Pro

bes ▪ 3

00 m

il /

7.50

mm

AC

TU

AL

SIZ

E

Plunger Plating

Code Material

No letter Hard Gold


SWTB2560 N QB 5 3 Sa b c d e f g




Code Rated force

(N) [oz]

S 0.70 2.5

Plunger Material

Code Material

5 Steel







Barrel Material: Brass - Gold Plated


Connector Pin Diameter: 0.50 mm [0.020]



Installation TipDUT

Test Module Fixture

Test Probe

Ball-headed Switch Probes series SWTB2560 are actually micro-switches and are ideal for side-connection. The threaded design allows precise height and switching point adjustment. The repeatable switching path ensures the quality of our Switch Probes.


• Moving DUT detection

• Side connection to DUT


Recommended Socket / Receptacle Series for Switch Probes SWTB2560 is RCT256.




Tip Diameter

Code

Tip Diameter

mm [inches]

QB 5 3 4 0.157


RCT256 N OR03x y z

Code Material

No letter Hard Gold



RCT256 OR03

Installation Height• Variable: variable

Material: Brass

Plating: Hard Gold

ON

OFFTool for SWTB2560 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*

Tool Handle w. shaft Insertion & Extraction Bit

TH1 TBT30070


Tool for RCT256 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)

- has to be chosen*

Handle TH1







PN1000 Pneumatic Test Probes

PN

1000

Pn

eum

atic

Tes

t Pr

obes

▪ 10

0 M

il /

2.54

mm

AC

TU

AL

SIZ

E

185


PN1000 R CG 5 4 LSa b c d e f g




Code Rated force

(N) [oz]

LS 0.60 2.2

Plunger Material

Code Material

5 Steel



Maximum Stroke: 10.00 mm [0.394]

Contact Force at Work.Stroke: 0.6 N (2.2 oz)

Operating Medium: Compressed Air (filtered, oil-free)

Operating Pressure: 6 bar (86 psi)






Pneumatic Probes use compressed air to activate the plunger. When compressed air is applied then the plunger shoots out of the barrel and contacts the test point. The spring inside the barrel has the function to retract the plunger to its home position after turning off the compressed air.The Pneumatic Probes offer the ideal solution when only a few test points need to be contacted from the side or angularly. And in the case of only a few test points they also offer a cost-effective solution instead of using spring-loaded probes mounted in the moving probe plate of a Test Fixture.

AC

TUA

L S

IZE


Tip Styles PN1000

PN

1000

Pn

eum

atic

Tes

t Pr

obes

▪ 10

0 M

il /

2.54

mm

186

RCP094 PN03

Installation Height• Fixed: 5.90 mm [0.232 ]


Material: Brass

Plating: Hard Gold

Installation Height & Max. Stroke


Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

4CA 5 3 R 1.30 0.051

CG 5 4 R 2.50 0.098

1LA 5 3 R 1.00 0.039

3UB 5 3 R 1.50 0.059


Plunger Plating

Code Material

R Rhodium

*Note: The Sockets / Receptacles RCP094 and PA1040 can be used from

Grid 3.00 mm (120 Mil) up.

Tool for PN1000 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*




- -

TH1 TBP10000 - -



- has to be chosen*

Handle TH1







RCP094 N PN03x y z

Code Material

No letter Hard Gold



Recommended Socket / Receptacle Series for Pneumatic Test Probes PN1000 is RCP094.


PA1040Material: Brass - Gold Plated





PN

1001

A

CT

UA

L S

IZE

187


PN1001 R 1LA 5 3 LSa b c d e f g



Plunger Material

Code Material

5 Steel













AC

TUA

L S

IZE


Tip Styles PN1001

PN

1001

188

RCP094 PN03



Material: Brass

Plating: Hard Gold


Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

4CA 5 3 R 1.30 0.051

CG 5 4 R 2.50 0.098

1LA 5 3 R 1.00 0.039

3UB 5 3 R 1.50 0.059


Plunger Plating

Code Material

R Rhodium


*Note: The Sockets / Receptacles RCP094 and PA1040 can be used from Grid

3.00 mm (120 Mil) up.





- -

TH1 TBP10000 - -



- has to be chosen*

Handle TH1






Code Rated force

(N) [oz]

LS 0.60 2.2




Pneu

mat

ic T

est

Prob

es ▪

100

Mil

/ 2.

54 m

m

Pneu

mat

ic T

est

Prob

es ▪

100

Mil

/ 2.

54 m

m


RCP094 N PN03x y z

Code Material

No letter Hard Gold








PN

1002

A

CT

UA

L S

IZE

189




PN1002 R CG 5 4 XSa b c d e f g




Code Rated force

(N) [oz]

XS 0.60 2.2









Barrel Material: Phosphor Bronze / Beryllium Copperr



AC

TUA

L S

IZE


Tip Styles PN1002

PN

1002

190

RCP118 PN03



Material: Brass

Plating: Hard Gold


Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

4CA 5 3 R 1.30 0.051

CG 5 4 R 2.50 0.098

3UB 5 4 R 1.50 0.059


Plunger Plating

Code Material

R Rhodium

Plunger Material

Code Material

5 Steel*Note: The Sockets / Receptacles

RCP118 and PA1040 can be used from Grid 3.50 mm (140 Mil) up.





- -

TH1 TBP10000 - -



- has to be chosen*

Handle TH1





Pneu

mat

ic T

est

Prob

es ▪

100

Mil

/ 2.

54 m

m

Pneu

mat

ic T

est

Prob

es ▪

100

Mil

/ 2.

54 m

m




RCP118 N PN03x y z

Code Material

No letter Hard Gold









PN

1003

A

CT

UA

L S

IZE

191




PN1003 R CG 5 4 XSa b c d e f g














AC

TUA

L S

IZE


Tip Styles PN1003

PN

1003

192


Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

4CA 5 3 R 1.30 0.051

CG 5 4 R 2.50 0.098

3UB 5 4 R 1.50 0.059


Plunger Plating

Code Material

R Rhodium

Plunger Material

Code Material

5 Steel

RCP118 PN03



Material: Brass

Plating: Hard Gold

*Note: The Sockets / Receptacles RCP118 and PA1040 can be used from Grid 3.50 mm (140 Mil) up.





- -

TH1 TBP10000 - -



- has to be chosen*

Handle TH1






Code Rated force

(N) [oz]

XS 0.60 2.2


RCP118 N PN03x y z

Code Material

No letter Hard Gold





Pneu

mat

ic T

est

Prob

es ▪

100

Mil

/ 2.

54 m

m

Pneu

mat

ic T

est

Prob

es ▪

100

Mil

/ 2.

54 m

m









PN

1401

A

CT

UA

L S

IZE

193

Recommended Socket / Receptacle Series forPneumatic Test Probes PN1401 is RCP134.



PN1401 R 1CA 5 5 Ma b c d e f g




Code Rated force

(N) [oz]

M 1.50 5.4

AC

TUA

L S

IZE


Tip Styles PN1401

PN

1401

194

RCP134 PN03



Material: Brass

Plating: Hard Gold

Installation Height


Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

1CA 5 5 R 1.30 0.051

TA 5 3 R 3.00 0.118

1UB 5 3 R 2.00 0.078


Plunger Plating

Code Material

R Rhodium

Plunger Material

Code Material

5 Steel




Contact Force at Work.Stroke: *1.10 N (4.0 oz) or

1.50 N (5.4 oz)








Note: The Sockets / Receptacles RCP134 and PA1040 can be used from

Grid 4.00 mm (160 Mil) up.





- -

TH1 TBP16000 - -



- has to be chosen*

Handle TH1





Pneu

mat

ic T

est

Prob

es ▪

140

Mil

/ 3.

50 m

m

Pneu

mat

ic T

est

Prob

es ▪

140

Mil

/ 3.

50 m

m




RCP134 N PN03x y z

Code Material

No letter Hard Gold






PN

1402

A

CT

UA

L S

IZE

195

Recommended Socket / Receptacle Series forPneumatic Test Probes PN1402 is RCP134.



PN1402 R 1CA 5 3 Ma b c d e f g




AC

TUA

L S

IZE


Tip Styles PN1402

PN

1402

196

RCP134 PN03



Material: Brass

Plating: Hard Gold

Installation Height

Plunger Material

Code Material

5 Steel




Contact Force at Work.Stroke: *1.10 N [4.0 oz] or

1.50 N [5.4 oz]


Operating Pressure: 6 bar [86 psi]






Note: The sockets / Receptacles RCP134 and PA1040 can be used from Grid

4.00 mm (160 Mil) up.






- -

TH1 TBP16000 - -



- has to be chosen*

Handle TH1






Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

1CA 5 3 R 1.30 0.051

TA 5 3 R 3.00 0.118

1UB 5 3 R 2.00 0.078

Plunger Plating

Code Material

R Rhodium


Code Rated force

(N) [oz]

M 1.50 5.4



RCP134 N PN03x y z

Code Material

No letter Hard Gold



Pneu

mat

ic T

est

Prob

es ▪

140

Mil

/ 3.

50 m

m

Pneu

mat

ic T

est

Prob

es ▪

140

Mil

/ 3.

50 m

m




Pneu

mat

ic A

cces

sori

es

197 198

PA Pneumatic Accessories

PA

AC

TU

AL

SIZ

E

Pneumatic Accessories PA

PA

PT1

PT3

PT1

PT3

PT1

PT2

PT2

PT2

PT3

PT3

PA 1008 - Threaded Air Terminal

PA 1009 - T Air Divider PA 1012 - 10 Pieces Air Divider

PA 1038 - Pneumatic Air Hose Y FittingMaterial: Plastic


PA 1000 - Air Reducer




PA 1017 - Threaded Plug for PA1012 with seal PA 1018 - Threaded Plug Plug for PA1009; PA1012 with seal

PA 1019 - Air Reducer from G 1/8" to M5 for PA1012

PA 1040- Quick wire change solution


PA 1013 - Pneumatic Air HoseMaterial: Plastic



With a big variety of accessories, we offer complete solution from one hand, in order to operate your Pneumatic Test Probes in the shortest time possible. Please make your selection and contact your DUTs with Pneumatic Test Probes.

Material: Brass

Pneu

mat

ic A

cces

sori

es

PN

EUM

ATIC

AIR

HO

SE

≡ Pneumatic Accessories Ordering Code Example

PA1017a

a: Series



Tip Diameter

Code

Tip Diameter

mm [inches]

EJ 0 3 1.96 0.077

EM0 3 1.57 0.062

0 4 1.96 0.077

EP0 3 3.30 0.130

0 4 2.49 0.098

EQ 0 3 3.96 0.156

RA0 5 1.17 0.046

0 6 1.96 0.077

TD 0 3 1.96 0.077

AC

TUA

L S

IZE


BP1000 Battery Probes Tip Styles BP1000B

P10

00

BP

1000

Bat

ter

y Pr

obe

s ▪ 1

00 M

il /

2.54

mm

Bat

ter

y Pr

obe

s ▪ 1

00 M

il /

2.54

mm

AC

TU

AL

SIZ

E

Battery Probes are designed and used for charging batteries or connecting different equipment with each other. Typical usages are docking stations and portable devices of Telecom, Medical, Navigation and Communication Equipment.

Note: Custom-built requirements can be offered on demand.







Barrel Material: Beryllium Copper / Nickel Silver Barrel Plating: -

Spring Material: Spring Steel Silver Plated


Plunger Plating

Code Material

No letter Hard Gold


BP1000 R EJ 0 3 XSa b c d e f g



Plunger Material

Code Material

0 BeCu

RCP065U SR03




Plating: No Plating

RCP065U CR03




Plating: No Plating

RCP065U WR03




Plating: No Plating

WW Post: Brass - Gold Plated


Code Rated force

(N) [oz]

XS 0.60 2.5

M 1.25 4.5

N 1.85 6.7

Installation Height

Tool for BP1000 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*




TH1 TBP10000 TBP10036 TBP11870


Tool for RCP65U Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)

- has to be chosen*

Handle TH1






Recommended Socket / Receptacle Series for Battery Test Probes BP1000 is RCP65U. See Page 200 for detailed information.

≡ Socket / Receptacle Ordering Code Example Socket / Receptacle

RCP065U N SR04x y z

Code Material

No letterNickel Silver (no plating)







AC

TUA

L S

IZE


BP1002 Battery Probes Sockets / Receptacles RCP066B

P10

02

RC

P06

6

Bat

tery

Pro

bes ▪ 1

00 M

il /

2.54

mm

Bat

tery

Pro

bes ▪ 1

00 M

il /

2.54

mm

AC

TU

AL

SIZ

E



Application:

• Charging Units

• PCB-to-PCB Contacting

• Docking Stations







Barrel Material: Phosphor Bronze


Mounting Hole Size: Probe diameter Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆

Plunger Plating

Code Material

No letter Hard Gold


BP1002 R RA 0 3 N

a b c d e f g

BP1002 R CG 0 4 Na b c d e f g



Plunger Material

Code Material

0 BeCu


Code Rated force

(N) [oz]

S 1.08 3.9

N 1.98 7.1





TH1 TBP10000 TBP10036 TBP10070




Tip Diameter

Code

Tip Diameter

mm [inches]

CC 0 3 * 0.80 0.031

CG 0 4 1.91 0.075

RA

0 3 * 0.80 0.031

0 4 1.03 0.041

0 6 1.99 0.078

TA 0 3 1.99 0.078

UE0 4 1.50 0.059

0 5 1.80 0.071

RCP066 CRF13

Installation Height• Fixed: 5.20 mm [0.204] or

4.80 mm [0.189]


Material: Phosphor Bronze

Plating: Hard Gold

WW Post: Brass - Gold Plated

Installation Height


RCP066 N CRF13x y z

Code Material

No letter Hard Gold



≡ Tip Diameter Code changes according to the Tip Style. Recommended Socket / Receptacle Series for Battery Test Probes BP1002 is RCP066.See Page 202 for detailed information.

RCP066 VRF39RCP066 WRF38

*Battery probes with these Tip Styles are longer 10.40 mm [0.409]




TH1 TBP10000 TBR10035 TBR10070


Wire Length : 700 mm [approx 27.0]



CR Crimp

VRF Pre-wired / top flanged



Tip Diameter

Code

Tip Diameter

mm [inches]

RA 8 3 1.02 0.040


Tip Diameter

Code

Tip Diameter

mm [inches]

RA 8 3 1.07 0.042

AC

TUA

L S

IZE


BP1003 Battery Probes Battery Probes BP1004B

P10

03

BP1

004

Bat

ter

y Pr

obe

s ▪ 1

00 M

il /

2.54

mm

Bat

ter

y Pr

obe

s ▪ 1

00 M

il /

2.54

mm

AC

TU

AL

SIZ

E



Installation: Probe without Socket / Receptacle. Direct Placement. Solder into PCB or other materials.









Mounting Hole Size: Probe Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆







Spring Material: Stainless Steel


Plunger Plating

Code Material

No letter Hard Gold

Plunger Plating

Code Material

No letter Hard Gold


BP1003 R RA 8 3 XSa b c d e f g




BP1004 R RA 8 3 Sa b c d e f g

a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter


Plunger Material

Code Material

8 Brass

Plunger Material

Code Material

8 Brass


Code Rated force

(N) [oz]

XS 0.80 2.9


Code Rated force

(N) [oz]

S 1.00 3.6





- -

TH1 TBP10000 - -






- -

TH1 TBP10000 - -







AC

TUA

L S

IZE



P12

00

BP

1200

Bat

tery

Pro

bes ▪ 1

18 M

il /

3.00

mm

Bat

tery

Pro

bes ▪ 1

18 M

il /

3.00

mm

AC

TU

AL

SIZ

E

205 206



Application:

• Charging Units












Plunger Plating

Code Material

No letter Hard Gold


BP1200 R CA 0 3 USa b c d e f g



Plunger Material

Code Material

0 BeCu


Code Rated force

(N) [oz]

US 0.60 2.2

XS 1.00 3.6

L 2.00 7.2





TH1 TBP10000 TBP11835 TBP11870


Recommended Socket / Receptacle Series for Battery Test Probes BP1200 is RCP091.See Page 206 for detailed information.



RCP091 N NR03x y z

Code Material

No letter Hard Gold




Tip Diameter

Code

Tip Diameter

mm [inches]

CA 0 3 1.30 0.051

LB 0 3 1.30 0.051

RA0 3 1.00 0.039

0 4 1.30 0.051

RCP091 NR03


Variable: not variable

Material: Brass

Plating: Hard Gold

RCP091 NR05



Material: Brass

Plating: Hard Gold


- has to be chosen*

Handle TH1





Installation Height



Tip Diameter

Code

Tip Diameter

mm [inches]

3RA 0 3 1.30 0.091

AC

TUA

L S

IZE

Centers 118 Mil / 3.00 mm Centers 118 Mil / 3.00

BP1203 Battery Probes Battery Probes BP1203B

P12

03

BP1

203

Bat

ter

y Pr

obe

s ▪ 1

18 M

il /

3.00

mm

Bat

ter

y Pr

obe

s ▪ 1

18 M

il /

3.00

mm

AC

TU

AL

SIZ

E












Plunger Plating

Code Material

No letter Hard Gold


BP1203 R 3RA 0 3 Na b c d e f g



Plunger Material

Code Material

0 BeCu


Code Rated force

(N) [oz]

US 0.50 1.8

L 2.00 7.2





TH1 TBP10000 TBP11835 TBP11870




Recommended Socket / Receptacle Series for Battery Test Probes BP1200 is RCP091.See Page 208 for detailed information.


RCP091 N NR05x y z

Code Material

No letter Hard Gold



Installation Height

RCP091 NR03



Material: Brass

Plating: Hard Gold

RCP091 NR05



Material: Brass

Plating: Hard Gold


- has to be chosen*

Handle TH1






AC

TUA

L S

IZE

Centers 160 Mil / 4.00 mm Centers x Mil / 4.00 mm


P16

01

BP

1601

Bat

tery

Pro

bes ▪ 1

60 M

il /

4.00

mm

Bat

tery

Pro

bes ▪ 1

60 M

il /

4.00

mm

AC

TU

AL

SIZ

E



Application:

• Charging Units



Installation: Probe without Socket / Receptacle. Direct Placement. Solder into PCB or other materials.


BP601 R CA 0 3 Ma b c d e f g







-

TH1 TBP16000 - TBP16070




Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

CG0 4 - 2.30 0.091

0 5 - 3.50 0.138

FA 0 3 - 2.30 0.091

3HK 0 3 - 2.30 0.091

RA 0 3 2.30 0.091

UE 0 3 - 2.30 0.091











Plunger Plating

Code Material

No letter Hard Gold

Plunger Material

Code Material

0 BeCu


Code Rated force

(N) [oz]

XS 0.80 2.9

S 1.20 4.3

M 1.50 5.4

N 2.50 9.0

XL 3.50 12.6

Installation Height



Tip Diameter

Code

Tip Diameter

mm [inches]

CG0 4 2.30 0.091

0 5 3.50 0.138

FA 0 3 2.30 0.091

3HK 0 3 2.30 0.091

RA0 2 2.03 0.080

0 3 2.30 0.091

UE 0 3 2.30 0.091

AC

TUA

L S

IZE



P16

02

BP

1602

Bat

tery

Pro

bes ▪ 1

60 M

il /

4.00

mm

Bat

tery

Pro

bes ▪ 1

60 M

il /

4.00

mm

AC

TU

AL

SIZ

E

211 212












Plunger Plating

Code Material

No letter Hard Gold


BP1602 R CG 0 4 Ma b c d e f g



Plunger Material

Code Material

0 BeCu

RCP118 SR03



Material: Brass

Plating: Hard Gold

Type BP1602 with Closed Barrel. Solderable into PCB.

Installation Height





-

TH1 TBP16000 - TBP16070



- has to be chosen*

Handle TH1








RCP118 N SR03x y z

Code Material

No letter Hard Gold



Recommended Socket / Receptacle Series for Battery Test Probes BP1602 is RCP118. See Page 212 for detailed information.


Code Rated force

(N) [oz]

XS 0.80 2.9

S 1.20 4.3

M 1.50 5.4

N 2.50 9.0

XL 3.50 12.6



Tip Diameter

Code

Tip Diameter

mm [inches]

CG0 3 2.30 0.091

0 4 3.50 0.138

FA 0 3 2.30 0.091

3HK 0 3 2.30 0.091

RA 0 3 2.30 0.091

3RA 0 3 2.30 0.091

UE 0 3 2.30 0.091

AC

TUA

L S

IZE



P16

04

BP

1604

Bat

tery

Pro

bes ▪ 1

60 M

il /

4.00

mm

Bat

tery

Pro

bes ▪ 1

60 M

il /

4.00

mm

AC

TU

AL

SIZ

E












Plunger Plating

Code Material

No letter Hard Gold


BP1604 R CG 0 4 Ma b c d e f g



Plunger Material

Code Material

0 BeCu

RCP118 SR03



Material: Brass

Plating: Hard Gold

Type BP1604 with Closed Barrel. Solderable into PCB.

Installation Height





-

TH1 TBP16000 - TBP16070



- has to be chosen*

Handle TH1








RCP118 N SR03x y z

Code Material

No letter Hard Gold





Code Rated force

(N) [oz]

XS 0.80 2.9

S 1.20 4.3

M 1.50 5.4

N 2.50 9.0

XL 3.50 12.6


AC

TUA

L S

IZE



P26

01

BP

2601

Bat

tery

Pro

bes ▪ 2

56 M

il /

6.50

mm

Bat

tery

Pro

bes ▪ 2

56 M

il /

6.50

mm

AC

TU

AL

SIZ

E












Plunger Plating

Code Material

No letter Hard Gold


BP2601 R CA 5 3 Ma b c d e f g



Plunger Material

Code Material

0 BeCu

RCP220 NR03



Material: Brass

Plating: Hard Gold

RCP220 NR05



Material: Brass

Plating: Hard Gold

Installation Height





-

TH1 TBP30000 TBP25635 -



- has to be chosen*

Handle TH1







RCP220 N SR05x y z

Code Material

No letter Hard Gold





Code Rated force

(N) [oz]

XS 0.60 2.2

S 1.50 5.4

M 3.00 10.8

N 4.00 14.4

XL 8.00 28.8


Tip Diameter

Code

Plunger Plating

Tip Diameter

mm [inches]

CA 5 3 - 4.00 0.157

CG 5 3 - 4.00 0.157

RA 8 3 - 4.00 0.157

RC 8 3 N- 4.00 0.157

RD 8 3 - 4.00 0.157



AC

TUA

L S

IZE

Centres 256 Mil / 6.50 mm Centres 256 Mil / 6.50 mm

KP2560 Kelvin Test Probes Tip Styles KP2560K

P25

60

KP

2560

Kelv

in T

est

Prob

es ▪

256

Mil

/ 6.

50 m

m

Kel

vin

Test

Pro

bes ▪ 2

56 M

il /

6.50

mm

AC

TU

AL

SIZ

E

217 218

Kelvin Test Probes have 2 independent Plungers, and are primarily used for 4-wire resistance measurement.

CONCEPT FOR SUPPLIER APPROVAL !

Ezen rajz, modell, szellemi termék az Equip-Test Kft. jogos tulajdonát

C Surface area:

0.25

6

1.20

0

0.02

0


Mechanical Data - Spring-Loaded Inner Plunger • Recommended Working Stroke: 3.0 mm [0.118]

• Full Stroke: 3.50 mm [0.138]

Mechanical Data - Outside Grounding• Recommended Working Stroke: 2 mm [0.079]


Total Spring Force• Total Spring Force by Working Stroke

6.5 N - 23.4 [oz]



Spring Material: Spring Steel Plated




No letter Hard Gold


0 BeCu5 Steel

Recommended Socket / Receptacle Series for Kelvin Test Probes KP2560 is RCP185. See Page 218 for detailed information.


KP2560 G4 M A Ma b c d e

a: Series b: Inner Plunger Tip Style c: Inner Plunger Spring Force d: Outer Plunger Tip Style e: Outer Plunger Spring Force


Tool for KP2560 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*




-

TH1 TBP30000 - TBP25670



Outside Grounding Spring Force at Working Stroke

Code Rated force

(N) [oz]

M 5.00 18.0

Inner Plunger Spring Force at Working Stroke

Code Rated force

(N) [oz]

M 1.50 5.4

Inner Plunger Tip StylePlunger Material

Tip Diameter x Tip Lenght

mm [inches]

U2 5 1.00 x 0.50 0.039 x 0.019

G4 5 1.00 x 1.50 0.039 x 0.059

Outer Plunger Tip StylePlunger Material

Plunger Diameter

mm [inches]

A 0 6.00 0.236


RCP185 NR03



Material: Brass

Plating: Hard Gold


- has to be chosen*

Handle TH1





493.000.01

221.001.3

370.058.1

420.006.0

950.005.1


PLG1027

Material: Brass - Tin Plated

Installation Height


RCP185 N NR03x y z

Code Material

No letter Hard Gold




AC

TUA

L S

IZE

Centres 256 Mil / 6.50 mm Centres 256 Mil / 6.50 mm

KPT2560 Kelvin Test Probes Tip Styles KPT2560K

PT2

560

KP

T256

0

Kelv

in T

est

Prob

es ▪

256

Mil

/ 6.

50 m

m

Kel

vin

Test

Pro

bes ▪ 2

56 M

il /

6.50

mm

AC

TU

AL

SIZ

E

Kelvin Test Probes have 2 independent Plungers, and are primarily used for 4-wire resistance measurement.

Ezen rajz, modell, szellemi termék az Equip-Test Kft. jogos tulajdonát

C Surface area:

1.20

0

0.25

6

0.02

0




Mechanical Data - Outside Grounding• Recommended Working Stroke: 2 mm [0.079]



6.5 N - 23.4 [oz]







No letter Hard Gold


0 BeCu

5 Steel

Recommended Socket / Receptacle Series for Kelvin Test Probes KP2560 is RCT217. See Page 220 for detailed information.


KPT2560 G4 M A Ma b c d e

a: Series b: Inner Plunger Tip Style c: Inner Plunger Spring Force d: Outer Plunger Tip Style e: Outer Plunger Spring Force


Tool for KP2560 Series Test Probes


TBT25670




Code Rated force

(N) [oz]

M 5.00 18.0


Code Rated force

(N) [oz]

M 1.50 5.4

Inner Plunger Tip StylePlunger Material

Tip Diameter x Tip Lenght

mm [inches]

U2 5 1.00 x 0.50 0.039 x 0.019

G4 5 1.00 x 1.50 0.039 x 0.059

Outer Plunger Tip StylePlunger Material

Plunger Diameter

mm [inches]

A 0 6.00 0.236


RCT217 NR03



Material: Brass

Plating: Hard Gold

Tool for RCT217 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)

- has to be chosen*

Handle TH1





C

Installation Height


RCT217 N NR03x y z

Code Material

No letter Hard Gold



493.000.01

221.001.3

370.058.1

420.006.0

950.005.1


PLG1027

Material: Brass - Tin Plated


AC

TUA

L S

IZE

221 222




Mechanical Data - Outside Grounding• Recommended Working Stroke: 4.00 mm [0.157]



5.30/ 6.00/ 7.30/ 8.00/ 9.30/ 10.00 N 19.1/ 21.6/ 26.3/28.8 / 33.5/ 35.9 [oz]

Electrical Data• Nominal Impedance: 50 Ω• Frequency Range: Up to 6 GHz

Materials• Barrel: Brass• Inner Plunger Tips: Beryllium Copper / Hard Gold plated

Cable Data• Connection Test Probe: MCX

396.100.34

241.006.3

811.000.3

930.000.1

5.3WS

4WS

530.009.0

380.001.2

042.105.13

354.005.11

671.064.4

771.005.4

581.007.4

751.000.4

621.002.3

371.004.4

396.100.34

241.006.3

811.000.3

930.000.1

5.3WS

4WS

380.001.2

530.009.0

042.105.13

354.005.11

671.064.4

771.005.4

751.000.4

621.002.3

5.0x5M

712.005.5

371.004.4


RF0506 L 3 N I Sa b c d e f

a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &

Diameter f: Outer Plunger Spring Force

≡ Threaded Test Probes Ordering Code Example

RFT0506 L 3 N I Sa b c d e f



Threaded RF Test Probe for contacting MCX Jack


Code Rated force

(N) [oz]

N 1.30 4.7

X 2.00 7.2


Code Rated force

(N) [oz]

S 4.00 15.8

M 6.00 21.6

L 8.00 28.8

Receptacles RRF1 and RRFT1 are used for Radio-Frequency Probes RF0506and RFT0506.


RF0506 Series of Radio-frequency Probes are designed for MCX Jack-based applications up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.

Frequency Range: Up to 4 GHz

RF4004 & RFT4004 RF Test Probes

RF4

004

- P

CB

AC

TU

AL

SIZ

E







5.60/ 7.60/ 9.60 N - 20.1/ 27.3/ 34.5 [oz]




RF4004 Series of Radio-frequency Probes are designed for PCB connection up to 4 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.

930.000.1

970.000.2

632.000.6

771.005.4

980.052.2

671.064.4

581.007.4

970.000.2

847.104.44

042.105.13

805.009.21

712.005.5

771.005.4

751.000.4

371.004.4

CMOC.SEBORPTSET

DEVRESER STHGIR LLAHf 8672 OSI NID :ecnarelot lareneG

1102 HGIRYPOC GNIWARD ELACS TON OD

930.000.1

970.000.2

652.005.6

771.005.4

5.0x5M

712.005.5

980.052.2

671.064.4

970.000.2

847.104.44

042.105.13

805.009.21

712.005.5

771.005.4

751.000.4

371.004.4


RF4004 A 2 S G6 Sa b c d e f




RFT4004 A 2 S G6 Sa b c d e f



Threaded RF Test Probe for PCB Contacting


Code Rated force

(N) [oz]

S 0.80 2.9


Code Rated force

(N) [oz]

S 4.00 14.4

M 6.00 21.6

L 8.00 28.8

RF

Test

Pro

bes ▪ U

p to

4 G

Hz

Receptacles RRF1 and RRFT1 are used for Radio-Frequency Probes RF4004 and RFT4004.



RF Test Probes RF0506 & RFT0506

RF0

506

- M

CX

Jack

RF

Test

Pro

bes ▪ U

p to

6 G

Hz


396.100.34

431.004.3

930.000.1

391.009.4

5.3WS

4WS

780.002.2

130.008.0

042.105.13

354.005.11

671.064.4

771.005.4

632.000.6

621.002.3

712.005.5

751.000.4

371.004.4

5.0x5M

C 1102 HGIRYPOC ACS TON OD

223 224



RF0

606

- S

MB

Plu

gA

CT

UA

L S

IZE







5.30/ 6.00/ 7.30/ 8.00/ 9.30/ 10.00 N 19.1/ 21.6/ 26.3/28.8 / 33.5/ 35.9 [oz]




771.005.4

5.3WS

4WS

950.005.1

751.000.4

042.105.13

605.058.21

647.153.44

712.005.5

671.064.4

771.005.4

581.007.4

791.000.5

371.004.4

771.005.4

350.053.1

5.3WS

4WS

751.000.4

5.0x5M

950.005.1

042.105.13

605.058.21

647.153.44

712.005.5

671.064.4

771.005.4

791.000.5

712.005.5

751.000.4

371.004.4


RF0606 C 4 N J2 Sa b c d e f




RFT0606 C 4 N J2 Sa b c d e f



Threaded RF Test Probe for contacting SMB Plug.


Code Rated force

(N) [oz]

N 1.30 4.7

X 2.00 7.2


Code Rated force

(N) [oz]

S 4.00 15.8

M 6.00 21.6

L 8.00 28.8



RF

Test

Pro

bes ▪ U

p to

6 G

Hz

RF0606 Series of Radio-frequency Probes are designed for SMB Plug-based applications up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.

AC

TUA

L S

IZE



RF0

706

- S

MB

Jac

k







5.30/ 6.00/ 7.30/ 8.00/ 9.30/ 10.00 N 19.1/ 21.6/ 26.3/28.8 / 33.5/ 35.9 [oz]




391.009.4431.004.3930.000.1

5.3WS

4WS

780.002.2

130.008.0

042.105.13

354.005.11

671.064.4

771.005.4

581.007.4

632.000.6

621.002.3

751.000.4

371.004.4


RF0706 L 2 N I Sa b c d e f




RFT0706 L 2 N I Sa b c d e g



Threaded RF Test Probe for contacting SMB Jack.


Code Rated force

(N) [oz]

N 1.30 4.7

X 2.00 7.2


Code Rated force

(N) [oz]

S 4.00 15.8

M 6.00 21.6

L 8.00 28.8



RF

Test

Pro

bes ▪ U

p to

6 G

Hz

RF0706 Series of Radio-frequency Probes are designed for SMB Jack-based applications up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.




RF0

806

- S

MC

Plu

gA

CT

UA

L S

IZE







5.30/ 6.00/ 7.30/ 8.00/ 9.30/ 10.00 N 19.1/ 21.6/ 26.3/28.8 / 33.5/ 35.9 [oz]




811.000.3

600.051.0

5.3WS

4WS

950.005.1

751.000.4

042.105.13

354.005.11

396.100.34

561.002.4

671.064.4

771.005.4

581.007.4

791.000.5

751.000.4

371.004.4

811.000.3

600.051.0

5.3WS

4WS

751.000.4

5.0x5M

950.005.1

042.105.13

354.005.11

396.100.34

561.002.4

671.064.4

771.005.4

791.000.5

712.005.5

751.000.4

371.004.4


RF0806 C 4 N J Sa b c d e f




RFT0806 C 4 N J Sa b c d e f



Threaded RF Test Probe for contacting SMC Plug.


Code Rated force

(N) [oz]

N 1.30 4.7

X 2.00 7.2


Code Rated force

(N) [oz]

S 4.00 15.8

M 6.00 21.6

L 8.00 28.8

Receptacles RRF1 and RRFT1 are used for Test Probes RF0806 & RFT0806.


RF

Test

Pro

bes ▪ U

p to

6 G

Hz

RF0806 Series of Radio-frequency Probes are designed for SMC Plug-based applications up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.

AC

TUA

L S

IZE



RF1

206

- S

MA

Jac

k







5.30/ 6.00/ 7.30/ 8.00/ 9.30/ 10.00 N 19.1/ 21.6/ 26.3/28.8 / 33.5/ 35.9 [oz]




170.008.1

780.002.2

712.005.5

5.3WS

4WS

652.005.6

042.105.13

062.006.6935.0

07.31

087.102.54

671.064.4

771.005.4

581.007.4

513.000.8

371.004.4

170.008.1

780.002.2

712.005.5

5.3WS

4WS

652.005.6

5.0x5M

042.105.13

062.006.6935.0

07.31

087.102.54

671.064.4

771.005.4

513.000.8

712.005.5

751.000.4

371.004.4


RF1206 L 8 N J Sa b c d e f




RFT1206 L 8 N J Sa b c d e f



Threaded RF Test Probe for contacting SMA Jack.


Code Rated force

(N) [oz]

N 1.30 4.7

X 2.00 7.2


Code Rated force

(N) [oz]

S 4.00 15.8

M 6.00 21.6

L 8.00 28.8



RF

Test

Pro

bes ▪ U

p to

6 G

Hz

RF1206 Series of Radio-frequency Probes are designed for SMA Jack-based applications up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.


AC

TUA

L S

IZE



RF2

806

- MS

/MM

Sw

itch







5.30/ 6.00/ 7.30/ 8.00/ 9.30/ 10.00 N 19.1/ 21.6/ 26.3/28.8 / 33.5/ 35.9 [oz]




740.002.1

431.004.3

420.006.0 051.0

08.3

317.105.34

5.3WS

4WS

771.005.4

042.105.13

274.000.21

671.064.4

581.007.4

751.000.4

011.008.2

020.015.0

371.004.4

431.004.3

420.006.0

621.002.3

317.105.34

5.3WS

4WS

740.002.1

771.005.4

042.105.13

274.000.21

671.064.4

751.000.4

011.008.2

020.015.0

712.005.55.0x5M

371.004.4


RF2806 G 2 N J1 Sa b c d e f




RFT2806 G 2 N J1 Sa b c d e f



Threaded RF Test Probe for contacting MM8130 / 8430 / MS 156 Switch


Code Rated force

(N) [oz]

N 1.30 4.7

X 2.00 7.2


Code Rated force

(N) [oz]

S 4.00 15.8

M 6.00 21.6

L 8.00 28.8



RF

Test

Pro

bes ▪ U

p to

6 G

Hz

RF2806 Series of Radio-frequency Probes are designed for MM8130 / 8140 / MS 156 Switch-based applications up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.







5.30/ 6.00/ 7.30/ 8.00/ 9.30/ 10.00 N 19.1/ 21.6/ 26.3/28.8 / 33.5/ 35.9 [oz]




396.100.34

570.009.1

451.009.3

5.3WS

4WS

760.007.1

042.105.13

354.005.11

671.064.4

771.005.4

581.007.4

751.000.4

011.008.2

371.004.4

920.047.0

396.100.34

570.009.1

451.009.3

5.3WS

4WS

760.007.1

5.0x5M

042.105.13

354.005.11

671.064.4

771.005.4

751.000.4

011.008.2

371.004.4

920.047.0

712.005.5









Threaded RF Test Probe for contacting U.FL Plug.


Code Rated force

(N) [oz]

N 1.30 4.7

X 2.00 7.2


Code Rated force

(N) [oz]

S 4.00 15.8

M 6.00 21.6

L 8.00 28.8



RF2506 Series of Radio-frequency Probes are designed for UFL Plug-based applications up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.



RF2

506

- U

.FL

Plu

gA

CT

UA

L S

IZE

RF

Test

Pro

bes ▪ U

p to

6 G

Hz








5.30/ 6.00/ 7.30/ 8.00/ 9.30/ 10.00 N 19.1/ 21.6/ 26.3/28.8 / 33.5/ 35.9 [oz]




712.005.5780.002.2

5.3WS

4WS

652.005.6

950.005.1

042.105.13

062.006.6935.0

07.31

087.102.54

671.064.4

771.005.4

581.007.4

513.000.8

371.004.4

712.005.5

680.071.2

5.3WS

4WS

652.005.6

5.0x5M

950.005.1

042.105.13

062.006.6935.0

07.31

087.102.54

671.064.4

771.005.4

513.000.8

712.005.5

751.000.4

371.004.4

CMOC.SEBORPTSET

DEVRESERSTHGIRLLAHf8672OSINID:ecnarelotlareneG

1102HGIRYPOC D




Diameter f: Spring Force of Outside Grounding





Threaded RF Test Probe for contacting SMA Plug.


Code Rated force

(N) [oz]

N 1.30 4.7

X 2.00 7.2


Code Rated force

(N) [oz]

S 4.00 14.4

M 6.00 21.6

L 8.00 28.8



RF3006 Series of Radio-frequency Probes are designed for SMA Plug-based applications up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.



RF2

806

- MS

/MM

Sw

itch

AC

TU

AL

SIZ

E







5.30/ 6.00/ 7.30/ 8.00/ 9.30/ 10.00 N 19.1/ 21.6/ 26.3/28.8 / 33.5/ 35.9 [oz]




811.000.3

712.005.5

621.002.3

098.100.84

5.3WS

4WS

740.002.1

042.105.13

056.005.61

671.064.4

771.005.4

581.007.4

751.000.4

011.008.2

020.015.0

371.004.4

811.000.3

712.005.5

621.002.3

098.100.84

5.3WS

4WS

530.098.0

042.105.13

056.005.61

671.064.4

771.005.4

751.000.4

011.008.2

020.015.0

712.005.55.0x5M

371.004.4


RF2806 G 2 N J2 Sa b c d e f




RFT2806 G 2 N J2 Sa b c d e f



Threaded RF Test Probe for MM8130/8430/MS 156 Switch.


Code Rated force

(N) [oz]

N 1.30 4.7

X 2.00 7.2


Code Rated force

(N) [oz]

S 4.00 15.8

M 6.00 21.6

L 8.00 28.8



RF

Test

Pro

bes ▪ U

p to

6 G

Hz

RF2806 Series of Radio-frequency Probes are designed for MM8130 / 8140 / MS 156 Switch-based applications up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.

AP

PR

OX

SIZ

E



RF3

006

- S

MA

Plu

gR

F Te

st P

robe

s ▪ U

p to

6 G

Hz

229


AC

TUA

L S

IZE


RF Receptacles RF Test Probes Inner Plungers

RFI

2051

Ser

ies





Materials• Barrel: Brass• Inner Plunger Tips:

Beryllium Copper / Hard Gold plated



RFI2051 G 2 Na b c d

a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force

Plunger Spring Force at Working Stroke

Code Rated force

(N) [oz]

N 1.30 4.7

X 2.00 7.2


RFI2051 A 2 S Ka b c d e

a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Special Design

Inner Plungers for RF4004 & RFT4004 - PCB

Inner Plungers forRF2806 & RFT2806 -

MM8130 / 8140 / MS 156

RFI 2051 A2 SK RFI 2051 E2 SK

Inne

r Pl

unge

rs f

or R

F te

st P

robe

s

The RF Series exchangeable Inner Plungers have the function of the Signal Pin in our RF Probes. Due to their exchangeability our RF probes are the best choice during the whole life-cycle of the product.

RRF1

Material: Brass

Plating: Hard Gold

RRFT1

Material: Brass

Plating: Hard Gold

Feature: Threaded







5.30/ 6.00/ 7.30/ 8.00/ 9.30/ 10.00 N 19.1/ 21.6/ 26.3/28.8 / 33.5/ 35.9 [oz]




641.007.3

800.002.0

751.000.4

042.001.6

950.005.1

5.3WS

4WS

042.105.13

422.007.5674.0

01.21

717.106.34

671.064.4

771.005.4

581.007.4

371.004.4

CMOC.SEBORPTSET

DEVRESERSTHGIRLLAHf8672OSINID:ecnarelotlareneG

1102HGIRYPOC

641.007.3

800.002.0

751.000.4

042.001.6

950.005.1

5.3WS

4WS

5.0x5M

042.105.13

422.007.5674.0

01.21

717.106.34

671.064.4

771.005.4

712.005.5

371.004.4


RF4706 C 4 N I1 Sa b c d e f




RFT4706 C 4 N I1 Sa b c d e f



Threaded RF Test Probe for Fakra Plug Contacting


Code Rated force

(N) [oz]

N 1.30 4.7

X 2.00 7.2


Code Rated force

(N) [oz]

S 4.00 15.8

M 6.00 21.6

L 8.00 28.8



RF4706 Series of Radio-frequency Probes are designed for Fakra-type Plug-based applications up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.

RF4

706

- FA

KR

AA

CT

UA

L S

IZE

RF

Test

Pro

bes ▪ U

p to

6 G

Hz



RFI 2051 G2 N

231


AC

TU

AL

SIZ

E

Frequency Range: Up to 6 GHz RF Cable Assemblies

RFI2051 Series RF Test Probes Inner Plungers Cable Confection, Module Assemblyand Custom Made RF Solutions RF Cable Assemblies

RFI

2051

Ser

ies

Cus

tom

ized

AC

TU

AL

SIZ

E

Technical Specifications:


Cable Data• Type: Multiflex 86

• Length: 750 mm [29.527]• Connection Test Probe: MCX• Connection Testing Technology: SMA

• Insulated


RFI2051 C 4 Na b c d

a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force

Inner Plunger for RF0506 & RFT0506 - MCX Jack

Inner Plunger for RF1206 & RFT1206 - SMA Jack

RFI 2051 L2 N RFI 2051 L3 N RFI 2051 L8 N

≡ RF Cable Assembly Ordering Code Example

RFCA I MCX 75 SMAa b c d

a: Series b: Connection to Test Probe c: Lenght of the Cable d: Connection to Testing System

RFCA I MCXm75 A

RFCA I MCX75 SMA

Complete service from one supplier:

• Consultancy

• Development

• Generating drawings

• Manufacturing the samples

• Trial series

• Manufacturing of Cables and Component Assembly

• Logistics

• Warehousing

Complete manufacturing process from one source:

• During the assembly our trained staff prepares and manufactures complex Cable Harnesses with the most cost-effective manufacturing processes.

• Prototypes, small and large production runs

• Bandaging, winding, taping, threads in covers and spiral sleevings

• Flat and flat-round Cable Processing

• Energy Chain Cables and assembling

• Over-molded Cable Assemblies with Macromeltor high-injection molding

• Cross-sections from 0.04 mm² up to 120 mm²

• Crimping, Soldering and Splicing

For more information please contact: [email protected]

Equip-Test provides Custom Made RF Cable Assemblies.

QualityDuring manufacturing first priority is given to our commitment to quality. We provide single-piece product testing for each of our products.

ReliabilityWe provide the shortest lead-time on the market to ensure on-time delivery according to customer needs.

PriceWe offer competitive pricing with cost-effective design & manufacturing. This means a clear benefit for both parties.

4

Inner Plunger for RF2506 & RFT2506 - UFL.m. Plug

Inner Plunger for RF0706 & RFT0706 - SMB Jack

Inner Plunger for RF3006 & RFT3006 - SMA PlugRF0806 & RFT0806 - SMC Plug

RFI 2051 C2 N RFI 2051 C4 N

Inne

r Pl

unge

rs f

or R

F te

st P

robe

s

RF

Cab

le A

ssem

blie

s

RFI 3051 G2 N

Inner Plungers forRF2806 & RFT2806

- MM8130 / 8140 / MS 156


AC

TU

AL

SIZ

E

Frequency Range: 3 GHz to 6 GHz Frequency Range: 3 GHz to 6 GHz

RF9000 001 & 002 RF Test Probes RF Test Probes RF9000 003 & 004

RF9

000

001

& 0

02

RF9

000

003

& 0

04

AC

TU

AL

SIZ

E


Frequency Range: DC to 6GHz

Nominal Impedance: 50 Ω

Temperature Range: -40 to +90 °C

Voltage Rating: 250 V r.m.s.

Withstanding Voltage: AC 300 V

Contact Resistance: max. 20 mΩ

Insulation Resistance: min. 500M Ω

Voltage Standing Wave Ratio (V.S.W.R.):

DC to 3GHz max. 1.60

3GHz to 6GHz max. 2.00

Insertion Loss:

DC to 3GHz max. 0.6 dB

3GHz to 6GHz max. 1.5 dB


Frequency Range: DC to 6GHz

Nominal Impedance: 50 Ω

Temperature Range: -40 to +90 °C

Voltage Rating: 250 V r.m.s.

Withstanding Voltage: No evidence of breakdown

Contact Resistance:

Center contact max. 25.0 mΩ

Outer contact max. 20.0 mΩ

Insulation Resistance: min. 500M Ω

Voltage Standing Wave Ratio (V.S.W.R.):

DC to 3GHz TBD

3GHz to 6GHz TBD

Insertion Loss:

DC to 3GHz TBD

3GHz to 6GHz TBC

The Floating Mechanism is not attached within the probe. Connector Jig with Floating Mechanism must be used. The engagement strokes from the flange to the tip of probe is 18.28 mm [0.720 in] to 19.78 mm [0.779 in] with vertical (0±2°) direction.

Automatic Measurement Probe RF9000 002. Floating Mechanism is attached within the Probe.

Automatic Measurement Probe RF9000 004 for testing Microwave Coaxial Connectors. The pressure force is 5N to 9N with vertical (0+/-2 degree).

453.000.9

036.000.61

x2 06.2 201.0 URHT

641.007.3

791.000.5

672.000.7

577.086.91

A2-SNU

63-4/1

913.105.33

951.050.4

625.053.31

258.056.12

560.056.1

2C.TFKTSET-PIUQE

DEVRESERSTHGIRLLA

:ECITON!gnitalperofeberasnoisnemidllA

6.1

2

detaercD3

5102.60.42dleifidoM

5102.60.42

.5102.11.81

Hf8672OSINID:ecnarelotlareneG mm86.9201:aeraecafruS

000009TFR

1102HGIRYPOC

3-5.0 6-3 03-6 021-03 004-02102.051.001.050.050.0

gninedraH

( )

lautcelletni ,ledom ,gniward sihT .dtL tseT-piuqE ot sgnoleb tcudorp gniypoc ,ytrap .dr3 ot ti gnidrawroF

kémret imellezs ,lledom ,zjar nezE tánodjalut sogoj .tfK tseT-piuqE za

kidamrah asátíbbávoT .izepék,asátísorozskos ,kenylémezs

za asálánzsahlef ygav asálosám eylédegne sosárí .tfK tseT-piuqE tegéssőlelef igojőtetnüb ,lüklén

!nátu agam tahnov

!LAVORPPAREILPPUSROFTPECNOC

:NOISIVER

annoDdiváD

:ELTIT

GNIWARDELACSTONOD

etaDerutangiSemaN

GFM

D'VPPA

D'KHC

NWARD

A-PIUQE

195.000.51

787.000.02

x2 06.2 201.0 URHT

051.008.3

312.004.5

549.000.42

A2-SNU 63-4/1

493.000.01

913.105.33

751.000.4

605.058.21

997.003.02

890.005.2

2C.TFK TSET-PIUQE

DEVRESER STHGIR LLA

:ECITON! gnitalp erofeb era snoisnemid llA

6.1

detaerc D3

5102.60.42dleifidoM

5102.60.42

.5102.11.81

Hf 8672 OSI NID :ecnarelot lareneG mm 15.7951:aera ecafruS

200 0009 TFR

1102 HGIRYPOC

3 - 5.0 6 - 3 03 - 6 021-03 004-02102.051.001.050.050.0

( )



za asálánzsahlef ygav asálosám eylédegne sosárí .tfK tseT-piuqE tegéssőlelef igojőtetnüb ,lüklén

!nátu agam tahnov

! LAVORPPA REILPPUS ROF TPECNO

:NOISIVER

annoD diváD

C

D

A

B

:ELTIT

GNIWARD ELACS TON OD

etaDerutangiSemaN

D'KHC

NWARD

ATSET-PIUQE

C Surface area:

453.000.9

036.000.61

x2 06.2 201.0 URHT

201.006.2791.0

00.5

787.000.02

A2-SNU 63-4/1

672.000.7

913.105.33

051.008.3

615.001.31

348.004.12

560.056.1

2C.TFK TSET-PIUQE

DEVRESER STHGIR LLA

:ECITON! gnitalp erofeb era snoisnemid llA

detaerc D3 5102.60.42

Hf 8672 OSI NID :ecnarelot lareneG mm 11.2301:aera ecafruS1102 HGIRYPOC

3 - 5.0 6 - 3 03 - 6 021-03 004-02102.051.001.050.050.0

( )



za asálánzsahlef ygav asálosám

:NOISIVER

:ELTIT

GNIWARD ELACS TON OD

etaDerutangiSemaN

AT-PIUQE


RF9000 001a b

a: Series b: Plunger Tip Style

RF

Test

Pro

bes ▪ U

3 G

Hz

and

6 G

Hz

RF

Test

Pro

bes ▪ U

3 G

Hz

and

6 G

Hz

RF9000 001 Series of Radio-frequency Probes are designed for various applications - from 3 GHz up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.

RF9000 003 Series of Radio-frequency Probes are designed for various applications - from 3 GHz up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.


Notes

Not

es

Customer Contact Information

Company Name:

Person's Name:

Street:

Post code / Country:

E-mail:

Fax:

Phone:

Cell Phone:

Short product & application description

Dimension Units mm inch

Expected Quantity:

Please fill out and scan in this data!

Send by e-mail to: [email protected] or Fax it to: +3629356480.

≡ Equip-Test™ • [email protected] • www.equip-test.com

Customer Contact Information

Company Name:

Person's Name:

Street:

Post code / Country:

E-mail:

Fax:

Phone:

Cell Phone:

Short product & application description

Dimension Units mm inch

Expected Quantity:

Please fill out and scan in this data!

Send by e-mail to: [email protected] or Fax it to: +3629356480.

HUNGARY - HEADQUARTERS

Equip - Test Kft.

Vágóhíd u. 19.H-2220 Vecsés, Hungary

Phone number: + 36 29 550 940Fax: + 36 29 356 480E-mail: [email protected]

GERMANY

Equip - Test GmbH

Max-Stromeyer-Str. 116D-78467 Konstanz, Deutschland

Phone number: + 49 7531 6984377Fax: + 49 7531 6984379Mobile: + 49 151 12929189E-mail: [email protected]

SLOVAKIA

Equip - Test s.r.o.

Čečinová 16/GSK 821 05 Bratislava, Slovakia


CZECH REPUBLIC

Equip - Test s.r.o.

Slovákova 8CZ 602 00 Brno, Czech Republic

Phone number: + 420 541 420 076E-mail: [email protected]

UKRAINE

Ekip - Test Ukraine TOV

Hoydy str., 10 office 72Uzhgorod, 88000, Ukraine

Phone number: + 380 312 61 23 98Mobile: + 380 50 432 4188E-mail: [email protected]

SERBIA

Multi - Test d.o.o.

Topolski put 65.21220 Bečej, Serbia

Phone number: + 381 652 054 160E-mail: [email protected]

POLAND

Equip - Test Sp. z o. o.

Balicka 16030-198 Kraków, Poland

Phone number: + 48 12 426 02 60Fax: + 48 12 426 02 61E-mail: [email protected]

BULGARIA

Equip - Test OOD

Dimitar Petkov str. Nr. 69 2nd Floor, Office 3Sofia 1309, Bulgaria

Mobile: +359 89 465 3694E-mail: [email protected]

ROMANIA

Echip - Test s.r.l.

Str. Locomotivei Nr.4410431 Oradea, Romania


ASIA - SINGAPORE

Equip - Test Asia PTE. LTD.

11 Kallang Place#04-05Singapore 339155

Phone number: +65 9768 7686Fax: + 65 6834 3046E-mail: [email protected]

www.equip-test.com

™ DISTRIBUTOR

equip test probe_catalog_edition 2016 - 2017

Business