equipment and components for the rf & microwave industry16350 16350 16350 16850 17150 40a springwood...

Equipment and Componentsfor the

RF & Microwave Industry

Passive Components

Active Components

Connectors, Cable and Cable Assemblies

Oscillators

Satellite CommunicationsEquipment

Noise Generators

Custom Equipment

Sub-Assemblies

EquipmentThe AtlanTec brand provides our customers withcomplete equipment solutions in either 19" rack chassis,bench mount instruments or modular form.

Whether the requirement is for a suite of satellitecommunications equipment, a radar test set or part of a radio astronomy receiver, you can count on the AtlanTecbrand to fulfil your system requirements. It may be eithera solution to an outline specification or a fully participativeventure or simply a requirement for build-to-print.

ComponentsFrom attenuators and amplifiers through connectors,couplers, isolators, mixers and power dividers to VCOsand zero bias Schottky detectors, there is a wealth ofchoice available, all bearing the AtlanTec stamps of valueand quality with stock delivery in many cases.

But AtlanTec means much more than standard when itcomes to our speciality lines of stabilised and phaselocked oscillators, our PC programmable sources, ourfrequency converters, multi-function modules and ourability to provide custom solutions with engineeringexcellence.Customer Service

Customer service is paramount, with a personalapproach being applied to every product enquiry.Technical support is available around the world throughany of our carefully selected and technically competentsales offices and distributors. We are willing to considerentering into long term supply agreements with ourcustomers and provide a stocking scheme tailored totheir production needs.

Quality AssuranceAll of our materials, sub-contractors and suppliers are verycarefully chosen to provide our customers with the valuethey need and expect. Our in-house systems and processesare all to BS EN ISO 9001:2000 and are constantly updatedto accommodate today’s challenges in product reliability.

DeliveryAs a customer-oriented company, you can be assured ofour ability to deliver. Much of our standard componentoffering can be delivered from stock in the DC to 50 GHzfrequency range with same-day dispatch available.

Introduction

Research & DevelopmentFrom our R&D base we constantly strive to provide state-of-the-art technology at an affordable cost and tested forsuitability for the environments, both civil and military, inwhich it is to be applied. New products are regularlyreleased and details can be found on our websitewww.AtlanTecRF.com.

AtlanTec is a brand name of Atlantic Microwave Ltd., one of theUK’s leading suppliers of equipment and components to themicrowave and RF industry.

With over 25 years experience as a microwave component supplier,Atlantic Microwave Ltd. has very significantly expanded its productrange and capability over the years to include both standard andcustom equipment as well as multi-function modules, sub-assemblies and super-components.

Sound engineering principles, innovative solutions, qualitymanufacturing, top value products and excellent customer serviceare all key ingredients of the AtlanTec range, available from ourheadquarters and R&D base in Braintree, England.

Page(s)

Section 1 Satellite Communications EquipmentLoop Test Translators 4 & 5Satellite Communication Line Amplifiers 6 & 7

Section 2 Broadband Noise GeneratorsBroadband Noise Generators 8 & 9

Section 3 OscillatorsPLO - Internal reference APL - 02 Series 10 & 11PLO - External reference APL - 03 Series 12 & 13PLO - with Translator 5MHz or 10MHz External reference APL - 05 Series 14 & 15High Stability PLO - Internal reference APL - 06 Series 16 & 17Stabilised Oscillators - CRO & DRO 18 & 19PC Programmable Sources - ANS2 Series 20PC Programmable Sources - ANS3 Series 21Voltage Controlled Oscillators (V.C.O.) 22 & 23

Section 4 Active ComponentsMiniature Amplifiers - Drop-In 24 & 25

Section 5 Passive ComponentsCoaxial Isolators - Standard Bands ACI-20000 Series 26Coaxial Circulators - Standard Bands ACC-20000 Series 27Directional Couplers - Octave Band 28Directional Couplers - Broadband 29Directional Couplers - High Power 3090° Hybrid 3dB Couplers 31Directional Couplers - Multi-Octave 32Communication Band Couplers 33Two Way Power Dividers / Combiners A8000 Series 34Four Way Power Dividers / Combiners A8000 Series 35Eight Way Power Dividers / Combiners A8000 Series 36Broadband Power Dividers / Combiners BPD Series 37Attenuators - SMA & 2.92mm 38Attenuators - N, TNC, BNC, 7mm 39Coaxial Attenuators - 2 Watt BAS & BBS Series - SMA & 2.92mm 40Coaxial Attenuators - 2 Watt CAS Series - SMA 41Tunnel Diode Detectors 42Zero Bias Schottky Detectors 43

Section 6 Cable, Connectors & Cable AssembliesCoaxial Cable Semi-Flex & Semi-Rigid 44Coaxial Cable - Low Loss - Semi-Flex & Semi-Rigid 45

INDEX

40A Springwood Drive, Braintree, Essex CM7 2YN, England Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145Email: [email protected] www.AtlanTecRF.com

Index

Certificate No. 3875 3

The ALT series of Loop Test Translators are designed to replace thesatellite link for test and alignment of earth station systems operating inS, C, X, Ku or DBS frequency bands. Incorporating fundamentalfrequency phase locked oscillators and double balanced mixers, thetranslators block convert frequencies from uplink to either downlink orL-band for instantaneous monitoring of frequency, power levels andmodulation. The input path contains a front panel controlledcontinuously variable attenuator for reducing input power levels. Eachunit also provides a reference frequency output and LO lock alarm.

Details of models and frequency ranges overleaf.

We reserve the right to change standard product specifications without notice butwill be pleased to consider control drawings for quotation.

LOOP TEST TRANSLATORS

● S, C, X, Ku & DBS Bands● Simulates Satellite Link● High Stability● Low Phase Noise● Gain Adjustment● Reference Output● 1U Rack Height● Custom Options

General Specifications (also see options)Maximum Input Level +10dBmConversion Gain -20dB nom.Conversion Flatness +/-2dB typ.

+/-0.5dB/40MHz max.Attenuation Range 30dB min.Impedance 50 ohmsInput VSWR 1.8:1 typ.Output VSWR 1.8:1 typ.LO Frequency Stability +/-5ppm max. over 0+50C

+/-2ppm typ. over +10+40C+/-2ppm/day max.

Internal Reference 25 or 50MHz standardReference Output As internal referenceSignal Related Spurious -50dBc typ.LO Related Spurious -50dBm typ.Input Power 80-240V, 50-60HzInput Power Connector IEC with fuseOperating Temperature 0+50CStorage Temperature -40+85CAttenuation Control 10 turn with dial, front panelLock Alarm LED, front panelRF Input Connector SMA female, rear panelRF Output Connector SMA female, rear panelRef. Monitor Connector SMA female, rear panelSize 19” x 1U x 13.5” (343mm)

including connectors & protrusions

Options:-

00 - Standard

01 - 10MHz Internal Reference02 - 50 MHz External Reference03 - 10 MHz External Reference04 - High Stability OCXO Internal Reference

with Frequency Adjustment

11 - Switchable External LO12 - Exclusive External LO

21 - 0dB Conversion Gain

31- Step Attenuator 0-69dB in 1dB steps(instead of continuously variable)

41 - Type N Female input connector42 - Type N Female output connector

Custom Options:-

Multi-Band UnitsFiltered OutputModular ConstructionPortable Units

Phase Noise (dBc/Hz) (typical)

Offset Frequency

(Hz)

100

1K

10K

100K

1M

650

-80

-115

-130

-135

-140

1750

-73

-105

-125

-125

-140

3050

-65

-100

-115

-115

-135

5100

-60

-92

-105

-112

-125

7400

-56

-90

-100

-110

-120

13050

-53

-85

-95

-105

-115

LO Frequency (MHz)


Certificate No. 3875

Section 1Satellite Communications Equipment4

Model

Number

ALT-0175-S

ALT-1075-S

ALT-2225-C

ALT-4975-C

ALT-7375-CI

ALT-0650-X

ALT-6950-X

ALT-1800-Ku

ALT-2050-Ku

ALT-11800-Ku

ALT-1750-KuE

ALT-2300-KuE

ALT-2800-KuE

ALT-3050-KuE

ALT-12800-KuE

ALT-1750-Ku

ALT-2300-Ku

ALT-2550-Ku

ALT-3050-Ku

ALT-13050-Ku

ALT-5100-DBS

ALT-5178-DBS

ALT-5600-DBS-A

ALT-5600-DBS-B

ALT-5600-DBS-C

ALT-7400-DBS

ALT-16350-DBS-A

ALT-16350-DBS-B

ALT-16350-DBS-F

ALT-16850-DBS

ALT-17150-DBS

Translation

Bands

S-S

S-L

C-C

C-L

C-L(inv)

X-X

X-L

Ku-Ku

Ku-Ku

Ku-L

KuE-Ku

KuE-Ku

KuE-Ku

KuE-Ku

KuE-L

Ku-Ku

Ku-Ku

Ku-Ku

Ku-Ku

Ku-L

DBS-DBS

DBS-DBS

DBS-DBS

DBS-DBS

DBS-DBS

DBS-DBS

DBS-L

DBS-L

DBS-L

DBS-L

DBS-L

Input

Frequency Range

(MHz)

2025-2125

2025-2125

5845-6425

5925-6425

5925-6425

7900-8400

7900-8400

12750-13250

12750-13250

12750-13250

13750-14500

13750-14500

13750-14500

13750-14500

13750-14500

14000-14500

14000-14500

14000-14500

14000-14500

14000-14500

17300-17800

17300-17800

17300-17800

17300-18100

17800-18100

18100-18400

17300-17800

17300-18100

17300-18400

17800-18100

18100-18400

Output

Frequency Range

(MHz)

2200-2300

950-1050

3620-4200

950-1450

1450-950

7250-7750

950-1450

10950-11450

10700-11200

950-1450

12000-12750

11450-12200

10950-11700

10700-11450

950-1700

12250-12750

11700-12200

11450-11950

10950-11450

950-1450

12200-12700

12122-12622

11700-12200

11700-12500

12200-12500

10700-11000

950-1450

950-1750

950-2050

950-1250

950-1250

LO

Frequency

(MHz)

175

1075

2225

4975

7375

650

6950

1800

2050

11800

1750

2300

2800

3050

12800

1750

2300

2550

3050

13050

5100

5178

5600

5600

5600

7400

16350

16350

16350

16850

17150



Section 1Satellite Communications Equipment

5

The ALS series of Satellite Communication Line Amplifiers are designedto compensate for losses in microwave and RF signal paths, eitherbetween system components and across site or as a driver for highpower transmission amplifiers. The amplifiers operate in specific C, X,Ku, DBS and Ka uplink or downlink frequencies and some multi-bandmodels provide the versatility of covering both up and down linkfrequencies. Alternatively, some models cover more than one linkfrequency regime.

A range of options is available, some of which will affect thespecifications given in the table. Please contact the factory for fulldetails regarding any particular design.


SATELLITE COMMUNICATIONLINE AMPLIFIERS

● L, C, X, Ku, DBS, Ka Bands

● Multi-Bands

● Driver & Cross Site

● Flat Response

● 1U Rack Height

● Custom Options

General Specifications (also see options)Impedance 50 ohmsMaximum Input Level +20 dBmGain Flatness +/-0.5 dB typ. in any 500MHzThird Order Intercept +30 dBm typ.Saturation Output Power 2 dB typ. above 1dB GCPInternally Generated Spurious -70 dBc typ.Operating Temperature Range -10+50CNoise Figure Specification @ +25CInput & Output Connectors Rear panel (see table)Option 01 RF Monitor Connector Rear panel (see table)Option 12 Detector Output Rear panel, BNC femaleOptional Attenuator Control 10 turn knob with dialA.C. Input Power 80-240V, 50-60HzInput Power Connector IEC with fuse, rear panelPower On/Off with Indicator Front panelSize 19” x 1U x 13.3” (343mm)

including connectors & protrusions

Options:-

00 - Standard

01 - 30 dB Output Coupler with RF Monitor Port02 - Two Outputs @ +20 dBm each03 - Three Outputs @ +20 dBm each04 - Four Outputs @ +20 dBm each

21 - 30 dB Variable Input Attenuator22 - 30 dB Variable Output Attenuator23 - Output Monitor Detector24 - 30 dB Gain (min)25 - 40 dB Gain (min)26 - +23 dBm output @ 1dB GCP (min)27 - Input Isolator (1.25:1 VSWR, subject to bandwidth)28 - Output Isolator (1.25:1 VSWR, subject to bandwidth)

31 - Type N Female Input Connector (18 GHz max)32 - Type N Female Output Connector (18 GHz max)33 - Type N Female RF Monitor Connector (18 GHz max)

Custom Options:-

Custom Frequency RangeCustom Gain ProfileCable Loss Gain EqualisationTWT Slope Gain EqualisationFiltered OutputHigher Output Power to 10 watts (not 1U rack)Switched Channel OutputsRemote Gain ControlMultiple InputsPortable UnitsModular Construction



Section 1Satellite Communications Equipment6

Model

Number

ALS-000002

ALS-000020

ALS-009017

ALS-009020

ALS-036042

ALS-036064

ALS-058064

ALS-072077

ALS-072084

ALS-079084

ALS-107127

ALS-107147

ALS-117145

ALS-122145

ALS-127132

ALS-127145

ALS-137-145

ALS-036145

ALS-072145

ALS-107184

ALS-173184

ALS-177212

ALS-280310

Satcom

Band

I.F.

I.F. & L

L

L

C

C

C

X

X

X

Ku

Ku

Ku

Ku

Ku

Ku

Ku

C, X & Ku

X & Ku

Ku & DBS

DBS

Ka

Ka

Frequency Range

(GHz)

0.01 - 0.20

0.01 - 2.00

0.95 - 1.70

0.95 - 2.05

3.62 - 4.20

3.62 - 6.425

5.845-6.425

7.25 - 7.75

7.25 - 8.4

7.9 - 8.4

10.7 - 12.75

10.7 - 14.5

11.7 - 14.5

12.25 - 14.5

12.75 - 13.25

12.75 - 14.5

13.75 - 14.5

3.62 - 14.5

7.25 - 14.5

10.7 - 18.4

17.3 - 18.4

17.7 - 21.2

28.0 - 31.0

Gain

dB (nom)

30

30

30

30

30

25

25

25

25

25

20

20

20

20

20

20

20

20

20

20

20

20

20

Output

@1dB GCP

dBm (min)

20

20

20

20

20

20

20

20

20

20

20

20

20

20

20

20

20

20

20

20

20

20

20

Noise

Figure

dB (typ)

8

8

8

8

3

3

3

4

4

4

5

5

5

5

5

5

5

6

6

6

6

7

8

VSWR

Input/Output

(typ)

2.0:1

2.0:1

2.0:1

2.0:1

2.0:1

2.0:1

2.0:1

2.0:1

2.0:1

2.0:1

2.0:1

2.0:1

2.0:1

2.0:1

2.0:1

2.0:1

2.0:1

2.0:1

2.0:1

2.0:1

2.0:1

2.0:1

2.5:1

Connectors

Input/Output

& RF Monitor

SMA f

SMA f

SMA f

SMA f

SMA f

SMA f

SMA f

SMA f

SMA f

SMA f

SMA f

SMA f

SMA f

SMA f

SMA f

SMA f

SMA f

SMA f

SMA f

SMA f

SMA f

SMA f

2.92mm f



Section 1Satellite Communications Equipment

7

The ANG series of general purpose noise generators provide up to 1watt of white Gaussian noise output in several models over the 10Hzto 18GHz frequency range, with custom options to 40GHz and aredesigned to be used either as laboratory instruments or as built-insystems test facilities.The noise, which is diode generated, is amplified and the level can bevaried in 1dB steps from 0 to 10dB or optionally in 0.1dB steps from 0to 111dB. Further standard options are available in addition to the ability to provide custom solutions for particular applications.


BROADBAND NOISE GENERATORS

● 10Hz - 18GHz

● High Output, Up to +30dBm

● White Symmetrical Gaussian Noise

● Test Instrument

● Flat Output

● Fine Attenuation Control

● Standard and Custom Options

General SpecificationsAttenuator Ranges 0 to 10dB in 1dB steps (standard)

0 to 100dB in 10dB steps0 to 1.0dB in 0.1dB steps

RF Output Connector SMA femaleFront Panel RF Output

Attenuator Control KnobsOn/Off Switch

Rear Panel IEC AC Power ConnectorAC Power SwitchAC Fuse

Operating Temperature -10+50CSpecification Temperature +25CInput Power 80-240V @ 50/60HzInstrument Size 14.6 (370) x 4.4 (110) x 11.8 (300) ins. (mm)

Plus Carry/Tilt Handle

Options:-

Note:- Standard Attenuator0-10dB in 1dB steps for frequencies up to 2GHz.0-9dB in 1dB steps for frequencies over 2GHz.

OPTION01A Alternative 100dB attenuator in 10dB steps

(for frequencies up to 2 GHz)01B Alternative 60dB attenuator in 10dB steps

(for frequencies over 2 GHz)02A Additional 100dB attenuator in 10dB steps

(for frequencies up to 2 GHz)02B Additional 60dB attenuator in 10dB steps

(for frequencies over 2 GHz)03 Custom A.C. Input.04 Signal combiner input. (6dB signal & noise loss)05 Marker input06 19" x 2U rack mount.07 N female output connector.08 BNC female output connector.

(for frequencies up to 2 GHz only)09 75 ohm impedance (6dB loss)

(for frequencies up to 2 GHz only)10 Additional 1dB attenuator in 0.1dB steps

(for frequencies up to 2 GHz only)

Custom variations include:-

Frequency RangeOutput PowerAlternative ConnectorsD.C. Input PowerDual OutputsSignal Input AttenuatorContinuously Variable AttenuatorsDigitally Remote Controlled AttenuatorsFiltered Output



Section 2Broadband Noise Generators8

Model

Number

ANG-1601

ANG-1603

ANG-1605

ANG-1607

ANG-1608

ANG-1609

ANG-1610

ANG-1612

ANG-1624

ANG-2618

ANG-1801

ANG-1803

ANG-1805

ANG-1807

ANG-1808

ANG-1809

ANG-1810

ANG-1811

Frequency

Range

(GHz)

10Hz - 20KHz

10Hz - 500KHz

10Hz - 10MHz

100Hz - 100MHz

100Hz - 500MHz

100Hz - 1GHz

100Hz - 1.5GHz

1MHz - 2GHz

2GHz - 4GHz

2GHz - 18GHz

500Hz - 20KHz

500Hz - 500KHz

500Hz - 10MHz

250KHz - 100MHz

1MHz - 200MHz

1MHz - 300MHz

2MHz - 500MHz

5MHz - 1GHz

Output

Power

dBm(nom)

+13

+13

+13

+13

+10

+10

+10

0

-10

-20

+30

+30

+30

+30

+30

+30

+30

+30

Noise

Density

dBm/Hz(nom)

-30

-44

-57

-67

-77

-80

-82

-93

-103

-122

-13

-27

-40

-50

-53

-55

-57

-60

Output

Flatness

±dB(typ)

0.5

0.5

0.8

1.0

1.5

2.0

2.0

2.5

2.5

3.0

2.0

2.0

2.0

2.0

2.0

2.0

2.0

3.0

Output

Impedance

Ohms (nom)

50

50

50

50

50

50

50

50

50

50

50

50

50

50

50

50

50

50



Section 2Broadband Noise Generators

9

PHASE LOCKED OSCILLATORSInternal Reference APL - 02 Series

● 300 MHz to 14 GHz

● Fundamental Frequency (CRO or DRO)

● Internal Reference

● Small Size

● Low Phase Noise

● Low Microphonics

● Low Current

● Custom Design

The APL - 02 series of fundamental frequency phase locked oscillatorsutilise coaxial resonators (CRO) to 3GHz and dielectric resonators(DRO) to 14 GHz in a phase locked loop with an internal crystalreference. Circuit design uses SMT devices including Si bipolar activedevices up to 3 GHz and GaAs FET active devices above 3 GHz. Theoutput contains a buffer amplifier for improved ruggedness, higheroutput power and a wider range of load VSWR. The PLOs also have areference monitor output. DRO types have an external tuning screw forfactory set up only.

General Specifications (also see options)Output Frequency 300 MHz to 14.0 GHzFrequency Stability +/-5ppm max. over 0+50C

(see options)Output Power +13dBm min. (see options)Output Power Stability +/-2dB maxHarmonics -20dBc max.Ref. Related Spurious -70dBc max.Other Spurious -80dBc max.Load VSWR 2.5:1 max.Input Voltage +15V d.c. (see options)Input Current 300mA max. (for +13dBm)Operating Temperature 0+50C standard (see options)Storage Temperature -40+85CLock Alarm TTL high for lockedRF Output Connector SMA femaleRef. Monitor Connector SMA female


Offset Frequency

(Hz)

100

1K

10K

100K

1M

0.6

-80

-115

-130

-135

-140

1.5

-73

-105

-125

-125

-140

3.0

-66

-100

-115

-115

-135

4.0

-64

-95

-110

-115

-135

10.0

-56

-90

-100

-110

-120

14.0

-53

-85

-95

-105

-115

Output Frequency (GHz)

Options:-

00 - Standard, based on 50 MHz internal crystal.Frequency Stability/Temperature01 - +/-5ppm max. over -10+60C02 - +/-5ppm max. over -20+70C03 - +/-10ppm max. over -40+85C04 - +/-2ppm max. over +10+40COutput Power11 - +16dBm min. up to 10 GHz12 - +20dBm min. up to 6 GHzD.C. Supply21 - Input Voltage +12V d.c.22- Regulated +11 to +16 V23 - +28V d.c.

Custom Options:-

Higher Output Frequency to 30 GHz (multiplied)Higher Output Power to +30dBm (amplified)Higher Stability to +/- 0.05ppm (OCXO)Lower Harmonics (filtered)Lock Alarm - Open CollectorCustom SizesInstrument or Rack Mount Housing with PowerSupply

We reserve the right to change standard productspecifications without notice, but will be pleased toconsider control drawings for quotation.

Model Numbers

Examples: -APL-02-13.050-0013.05GHz PLO with standard specifications

APL-02-10.750-02-11-2310.75GHz PLO with +/-5ppm over -20+70C, +16dBm and +28V.

Outlines (Overleaf)Frequency Outline0.3 - 3.0 GHz A3.0 - 6.0 GHz B6.0 - 14.0 GHz A



Section 3Oscillators10

0 0

0.35(8.9)

0.68 (17.3)

0.84 (21.3)

1.00 (25.4)

1.12 (28.5)

1.67(42.4)

2.25 (57.2)

0.62(15.8)

0.39(9.9)

2.16 (54.9)

0.09 (2.3)

0.11 (2.8) thru 4 places2.25 (57.2)

2.16

(54

.9)

0.09

(2.

3)

2.25

(57

.2)

0.44(11.2)

0.19 (4.8)

0.13 (3.3) max

XTAL MON. OUT SMA

SMA

L/A

Vcc

GND

RFOUT

TUNE(SEE NOTE 1)

NOTE 1: OMITTED ON CRO PLOs FACTORY SET UP ONLY

POSITIONS MAY VARY

OUTLINE A USED ON: CRO - PLOs: 0.3 TO 3.0 GHz DRO - PLOs: 6.0 TO 14.0 GHz

OV

OV

0 0

0.35 (8.9)

1.67 (42.4)

0.75(19.1)

0.39(9.9)

0.57(14.5)

XTAL MON. OUT SMA

SMA

L/A

Vcc

GND

RFOUTTUNE

(SEE NOTE 1)

OUTLINE B USED ON: DRO - PLOs: 3.0 TO 6.0 GHz

0.68 (17.3)

0.84 (21.3)

1.00 (25.4)

1.12 (28.5)

2.25 (57.2)

0.19 (4.8)

0.13 (3.3) max

2.16

(54

.9)

0.09

(2.

3)

2.25

(57

.2)

2.16 (54.9)

0.09 (2.3)

0.11 (2.8) thru 4 places2.25 (57.2)

NOTE 1: FACTORY SET UP ONLY POSITIONS MAY VARY

ALL DIMENSIONS ARE IN INCHES (mm)



Section 3Oscillators

11

● 300 MHz to 14 GHz● Fundamental Frequency (CRO or DRO)● External Reference● Small Size● Low Phase Noise● Low Microphonics● Low Current● Custom Design

The APL - 03 series of fundamental frequency phase locked oscillatorsutilise coaxial resonators (CRO) to 3GHz and dielectric resonators(DRO) to 14 GHz in a phase locked loop for use with an externalreference. Circuit design uses SMT devices including Si bipolar activedevices up to 3 GHz and GaAs FET active devices above 3 GHz. Theoutput contains a buffer amplifier for improved ruggedness, higheroutput power and a wider range of load VSWR. DRO types have anexternal tuning screw for factory set up only.

Reference Frequency Notes:-The output frequency must be an integral multiple of the reference frequency.Reference level required 0+/-3dBm

At offset frequencies up to 100KHz, the output phase noise is degraded from that of the reference oscillator by approximately 20logN+3dB, where N is the ratio of theoutput to the reference frequency.

PHASE LOCKED OSCILLATORSExternal Reference APL - 03 Series

General Specifications (also see options)Output Frequency 300 MHz to 14.0 GHzReference Frequency 25 - 200 MHz (see notes)Frequency Stability Reference dependentOutput Power +13dBm min. (see options)Output Power Stability +/-2dB maxHarmonics -20dBc max.Ref. Related Spurious -70dBc max.Other Spurious -80dBc max.Load VSWR 2.5:1 max.Input Voltage +15V d.c. (see options)Input Current 300mA max. (for +13dBm)Operating Temperature 0+50C standard (see options)Storage Temperature -40+85CLock Alarm TTL high for lockedRF Output Connector SMA femaleRef. Input Connector SMA female


Offset Frequency

(Hz)

100

1K

10K

100K

1M

0.6

-135

-140

1.5

-125

-140

3.0

-115

-135

4.0

-115

-135

10.0

-110

-120

14.0

-105

-115


Options:-

00 - StandardOperating Temperature01 - -10+60C02 - -20+70C03 - -40+85COutput Power11 - +16dBm min. up to 10 GHz12 - +20dBm min. up to 6 GHzD.C. Supply21 - Input Voltage +12V d.c.22- Regulated +11 to +16V23 - +28V d.c.

Custom Options:-

Higher Output Frequency to 30GHz (multiplied)Higher Output Power to +30dBm (amplified)Lower Harmonics (filtered)Lock Alarm - Open CollectorCustom SizesInstrument or Rack Mount Housing with PowerSupply


Model Numbers

Examples: -APL-03-13.050-50-0013.05GHz PLO with standardspecifications and 50MHz ref.

APL-03-10.750-50-02-11-2310.75GHz PLO with 50MHz ref.,-20+70C, +16dBm and +28V

Outlines (Overleaf)Frequency Outline0.3 - 3.0 GHz A3.0 - 6.0 GHz B6.0 - 14.0 GHz A

Reference Dependent - See Notes






0 0

0.35(8.9)

0.68 (17.3)

0.84 (21.3)1.00 (25.4)

1.12 (28.5)

1.67(42.4)

2.25 (57.2)

0.62(15.8)

0.39(9.9)

2.16 (54.9)

0.09 (2.3)

0.11 (2.8) thru 4 places2.25 (57.2)

2.16

(54.

9)

0.09

(2.3

)

2.25

(57.

2)

0.44(11.2)

0.19 (4.8)

0.13 (3.3) max

REF.IN SMA

SMA

L/A

Vcc

GND

RFOUT

TUNE(SEE NOTE 1)

NOTE 1: OMITTED ON CRO PLOs FACTORY SET UP ONLY POSITIONS MAY VARY

OUTLINE A USED ON: CRO - PLOs: 0.3 TO 3.0 GHz DRO - PLOs: 6.0 TO 14.0 GHz

OV

0 0

0.35 (8.9)

1.67 (42.4)

0.75(19.1)

0.39(9.9)

0.57(14.5)

SMA

SMA

L/A

Vcc

GND

RFOUTTUNE

(SEE NOTE 1)

OUTLINE B USED ON: DRO - PLOs: 3.0 TO 6.0 GHz

OV

0.68 (17.3)

0.84 (21.3)1.00 (25.4)

1.12 (28.5)

2.25 (57.2)

0.19 (4.8)

0.13 (3.3) max

2.16

(54.

9)

0.09

(2.3

)

2.25

(57.

2)

2.16 (54.9)

0.09 (2.3)

0.11 (2.8) thru 4 places2.25 (57.2)

REF.IN






13

The APL - 05 series of fundamental frequency phase locked oscillatorsutilise coaxial resonators (CRO) to 3GHz and dielectric resonators(DRO) to 14 GHz in dual phase locked loops for use with an external5MHz or 10MHz reference. Circuit design uses SMT devices including Si bipolar active devices up to 3 GHz and GaAs FET active devicesabove 3 GHz. The output contains a buffer amplifier for improvedruggedness, higher output power and a wider range of load VSWR.DRO types have an external tuning screw for factory set up only.

PHASE LOCKED OSCILLATORS with TRANSLATOR5MHz or 10MHz External Reference APL - 05 Series

● 300 MHz to 14 GHz● Fundamental Frequency (CRO or DRO)● External Reference● Small Size● Low Phase Noise● Low Microphonics● Low Current● Custom Design

General Specifications (also see options)Output Frequency 300 MHz to 14.0 GHzReference Frequency 5 MHz or 10 MHzFrequency Stability Reference dependentOutput Power +13dBm min. (see options)Output Power Stability +/-2dB maxHarmonics -20dBc max.Ref. Related Spurious -70dBc max.Other Spurious -80dBc max.Load VSWR 2.5:1 max.Input Voltage +15V d.c. (see options)Input Current 400mA max. (for +13dBm)Operating Temperature 0+50C standard (see options)Storage Temperature -40+85CLock Alarm TTL high for lockedRF Output Connector SMA femaleRef. Input Connector SMA female

Reference Frequency Notes:-Reference level required 0+/-3dBmAt offset frequencies up to 100Hz, the output phase noise is degraded from that of the reference oscillator by approximately 20logN+6dB, where N is the ratio of the outputto the reference frequency.

Options:-

00 - StandardOperating Temperature01 - -10+60C02 - -20+70C03 - -40+85COutput Power11 - +16dBm min. up to 10 GHz12 - +20dBm min. up to 6 GHzD.C. Supply21 - Input Voltage +12V d.c.22- Regulated +11 to +16V23 - +28V d.c.

Custom Options:-

Higher Output Frequency to 30GHz (multiplied)Higher Output Power to +30dBm (amplified) Lower Harmonics (filtered)Lock Alarm - Open CollectorCustom SizesInstrument or Rack Mount Housing with PowerSupply


Model Numbers

Examples: -APL-05-13.050-10-0013.05GHz PLO with standardspecifications and 10MHz ref.

APL-03-3.750-5-02-11-233.75GHz PLO with 5MHz ref., -20+70C,+16dBm and +28V.

Outlines (Overleaf)Frequency Outline0.3 - 3.0 GHz C3.0 - 6.0 GHz D6.0 - 14.0 GHz C

Phase Noise (dBc/Hz) (typical & based on 50MHz internal crystal)

Offset Frequency

(Hz)

100

1K

10K

100K

1M

0.6

-115

-130

-135

-140

1.5

-105

-125

-125

-140

3.0

-100

-115

-115

-135

4.0

-95

-110

-115

-135

10.0

-90

-100

-110

-120

14.0

-85

-95

-105

-115






0

0.25 (6.4)

0.51 (13.0)0.60 (15.2)

0.95 (24.1)

1.14 (29.0)

1.67(42.4)

2.25 (57.2)

0.90(22.9)

0.74(18.8)

0.70(17.8)

0.44(11.2)

2.16 (54.9)

0.09 (2.3)

0.11 (2.8) thru 4 places2.25 (57.2)

2.16

(54

.9)

0.09

(2.

3)

2.25

(57

.2)

0.22 (5.6)

0.13 (3.3) max

SMA

SMA

L/A

Vcc OSC

Vcc

GND

RF OUT

REF IN

TUNE(SEE NOTE 1)

NOTE 1: OMITTED ON CRO PLOs FACTORY SET UP ONLY POSITIONS MAY VARY

OUTLINE C USED ON: CRO - PLOs: 0.3 TO 3.0 GHz DRO - PLOs: 6.0 TO 14.0 GHz

OV

0

1.38 (35.1)

1.03(26.2)

0.87(22.1)

0.83(21.1)

0.57(14.5)

SMA

SMA

L/AVcc OSC

Vcc

GND

RF OUT

REF IN

OUTLINE D USED ON: DRO - PLOs: 3.0 TO 6.0 GHz

OV

TUNE(SEE NOTE 1)


2.16

(54

.9)

0.09

(2.

3)

2.25

(57

.2)

2.16 (54.9)

0.09 (2.3)

0.11 (2.8) thru 4 places2.25 (57.2)

1.14(29.0)

1.67(42.4)

00

0.25 (6.4)

0.51 (13.0)0.60 (15.2)

0.95 (24.1)

2.25 (57.2)

0.22 (5.6)

0.13 (3.3) max

1.38 (35.1)





15

The APL - 06 series of fundamental frequency phase locked oscillatorsutilise coaxial resonators (CRO) to 3GHz and dielectric resonators(DRO) to 14 GHz in a phase locked loop with an internal high stabilityOCXO reference. Circuit design uses SMT devices including Si bipolaractive devices up to 3 GHz and GaAs FET active devices above 3 GHz. The output contains a buffer amplifier for improved ruggedness,higher output power and a wider range of load VSWR. The PLOs alsohave an OCXO reference monitor output. DRO types have an externaltuning screw for factory set up only.

HIGH STABILITY PHASE LOCKEDOSCILLATORSInternal Reference APL - 06 Series

● 300 MHz to 14 GHz● Very High Stability● Fundamental Frequency (CRO or DRO)● Internal Reference (OCXO)● Low Phase Noise● Low Microphonics● Low Current● Custom Design

General Specifications (also see options)Output Frequency 300 MHz to 14.0 GHzFrequency Stability +/-0.05ppm max. over -20+60C

+/-0.005ppm/day typ. at despatch+/-0.5ppm/year max.

Output Power +13dBm min. (see options)Output Power Stability +/-2dB maxHarmonics -20dBc max.Ref. Related Spurious -70dBc max.Other Spurious -80dBc max.Load VSWR 2.5:1 max.Input Voltage +15V d.c. (see options)Input Current 600mA max. (for +13dBm)Operating Temperature -20+60C Storage Temperature -40+85CLock Alarm TTL high for lockedRF Output Connector SMA femaleRef. Monitor Connector SMA female

Options:-

00 - Standard, based on 50 MHz internal OCXO.Output Power11 - +16dBm min. up to 10 GHz12 - +20dBm min. up to 6 GHzD.C. Supply21 - Input Voltage +12V d.c.22- Regulated +11 to +16 V23 - +28V d.c.

Custom Options:-

Higher Output Frequency to 30 GHz (multiplied)Higher Output Power to +30dBm (amplified)Lower Harmonics (filtered)Lock Alarm - Open CollectorCustom SizesInstrument or Rack Mount Housing with PowerSupply


Model Numbers

Examples: -APL-06-13.050-0013.05GHz PLO with standard specifications

APL-06-10.750-11-2310.75GHz PLO with +16dBm and +28V.

Outlines (Overleaf)Frequency Outline0.3 - 3.0 GHz G3.0 - 6.0 GHz H6.0 - 14.0 GHz G


Offset Frequency

(Hz)

10

100

1K

10K

100K

1M

0.6

-63

-93

-117

-125

-135

-140

1.5

-55

-85

-109

-117

-125

-140

3.0

-49

-79

-103

-111

-115

-135

4.0

-47

-77

-101

-109

-115

-135

10.0

-39

-69

-93

-101

-110

-120

14.0

-36

-66

-90

-98

-105

-115





0

0.25 (6.4)

0.51 (13.0)

0.62 (15.7)

0.95 (24.1)

1.38 (35.1)

1.67 (42.4)

2.25 (57.2)

1.37(34.8)

0.92(23.4)

0.44(11.2)

2.16 (54.9)

0.09 (2.3)

0.11 (2.8) thru 4 places2.25 (57.2)

2.16

(54

.9)

0.09

(2.

3)

2.25

(57

.2)

0.22 (5.6)

0.13 (3.3) max

SMA

SMAL/A

Vcc

GND

RF OUT

REF MON

TUNE(SEE NOTE 1)

OUTLINE G PLO WITH INTERNAL OCXO USED ON: CRO - PLOs: 0.3 TO 3.0 GHz DRO - PLOs: 6.0 TO 14.0 GHz

OV

SMA

SMAL/A

Vcc

GND

RF OUT

REF. MON

OUTLINE H PLO WITH INTERNAL OCXO USED ON: DRO - PLOs: 3.0 TO 6.0 GHz

OV

2.16

(54

.9)

0.09

(2.

3)

2.25

(57

.2)

2.16 (54.9)

0.09 (2.3)

0.11 (2.8) thru 4 places2.25 (57.2)

NOTE 1: OMITTED ON CRO PLOs FACTORY SET UP ONLY

POSITIONS MAY VARY


0

0.25 (6.4)

0.51 (13.0)

0.62 (15.7)

0.95 (24.1)

1.38 (35.1)

1.67 (42.4)

2.25 (57.2)

1.50(38.1)

1.05(26.7)

0.57(14.5)

0.22 (5.6)

0.13 (3.3) max

TUNE(SEE NOTE 1)





17

The ACR and ADR series of fundamental frequency stabilised

oscillators utilise coaxial resonators (CRO) to 3GHz and dielectric

resonators (DRO) to 14 GHz. Circuit design uses SMT devices

including Si bipolar active devices up to 3 GHz and GaAs FET active

devices above 3 GHz. The output contains a buffer amplifier for

improved ruggedness, higher output power and a wider range of load

VSWR. DRO types have an external tuning screw for factory set up

and limited mechanical tuning.

STABILISED OSCILLATORS - CRO & DRO

● 300 MHz to 14 GHz● Fundamental Frequency (CRO or DRO)● Small Size● Low Phase Noise● Low Microphonics● Low Current● Custom Design

General Specifications (also see options)Output Frequency (fixed) 300 MHz to 14.0 GHz(see options for tuning)Frequency Stability300 MHz to 3.0 GHz (CRO) +/-10ppm/degC max.3.0 GHz to 14.0 GHz (DRO) +/-5ppm/degC max.Output Power +13dBm min. (see options)Output Power Stability +/-2dB maxHarmonics -20dBc max.Spurious -80dBc max.Frequency Pulling +/-1MHz max. @ 1.7:1VSWRFrequency Pushing +/-1MHz/V max.Input Voltage +15V d.c. (see options)Input Current 125mA max. (for +13dBm)Mechanical Tuning (DRO only) 1% typ.Operating Temperature 0+50C standard (see options)Storage Temperature -40+85C

Options:-

00 - StandardOperating Temperature01 - -10+60C02 - -20+70C03 - -40+85COutput Power11 - +16dBm min. up to 10 GHz12 - +20dBm min. up to 6 GHzD.C. Supply21 - Input Voltage +12V d.c.22 - Regulated +11 to +16 V23 - +28V d.c.Electrical Tuning31- Electrical Tuning for 0 - 12V

300 MHz to 3.0 GHz (CRO) 0.5% typ.3.0 GHz to 14.0 GHz (DRO) 0.2% typ.

Custom Options:-

Higher Output Frequency to 30 GHz (multiplied)Higher Output Power to +30dBm (amplified)Lower Harmonics (filtered)Custom SizesInstrument or Rack Mount Housing with PowerSupply


Model Numbers

Examples: -ACR-1.750-001.75 GHz CRO with standard specifications

ADR-13.050-02-11-2313.05 GHz DRO with -20+70C, +16dBm and +28V.

Outlines (Overleaf)Frequency Outline0.3 - 3.0 GHz E3.0 - 6.0 GHz F6.0 - 14.0 GHz E


Offset Frequency

(Hz)

1K

10K

100K

1M

0.6

-95

-115

-135

-140

1.5

-85

-105

-125

-140

3.0

-75

-95

-115

-135

4.0

-75

-95

-115

-135

10.0

-70

-90

-110

-120

14.0

-65

-85

-105

-115





0

0

0.57 (14.5)

0.62 (15.7)

0.40 (10.2)

1.15 (29.2)

0.62(15.7)

0.44(11.2)

2.16 (54.9)

0.09 (2.3)

0.11 (2.8) thru 4 places

2.25 (57.2)

0.95 (24.1)

0.27 (6.9)

1.35 (34.3)

1.85 (47.0)

1.06

(26

.9)

0.09

(2.

3)

1.15

(29

.2)

0.13 (3.3) max

SMA

(SEE NOTE 1)Vcc OSC

(SEE NOTE 2)VT Vcc AmpGND

RF OUTTUNE

(SEE NOTE 3)

NOTE 1: OMITTED ON CROs

NOTE 2: OMITTED FOR CROs & DROs WITHOUT ELECTRICAL TUNING

NOTE 3: OMITTED FOR CROs POSITIONS MAY VARY FOR DROs

OUTLINE E USED ON: CROs: 0.3 TO 3.0 GHz DROs: 6.0 TO 14.0 GHz

0

0

0.57 (14.5)

0.75 (19.1)

0.53 (13.5)

1.15 (29.2)

0.75(19.1)

0.57(14.5)

2.16 (54.9)

0.09 (2.3)

0.11 (2.8) thru 4 places

2.25 (57.2)

0.95 (24.1)

0.27 (6.9)

1.35 (34.3)

1.85 (47.0)

1.06

(26

.9)

0.09

(2.

3)

1.15

(29

.2)

0.13 (3.3) max

SMA

Vcc OSC(SEE NOTE 1)

VT Vcc AmpGND

RF OUTTUNE

(SEE NOTE 2)

NOTE 1: OMITTED FOR DROs WITHOUT ELECTRICAL TUNING

NOTE 2: POSITIONS MAY VARY

OUTLINE F USED ON: DROs: 3.0 TO 6.0 GHz





19

The ANS2 series of programmable, synthesised RF signal sources featureboth frequency and level control and, with a standard office PC, provide aturn-key solution to the provision of variable frequency sources for bothsystems and test equipment applications.Directly connecting to the PC parallel port, each unit can be set tofrequencies within a typical 1.5:1 range and at levels up to +10dBm via aneasy to use control panel software and the non-volatile memory enablesthe selected settings to be retained in the stand alone unit.Each unit contains a +/-1ppm stability reference TCXO but can also beused with an external reference. The sources are supplied complete withan 18V d.c. wall mount power supply, operating software and specialinterface cable.

PC PROGRAMMABLE SOURCES - ANS2 Series

● 45 MHz to 2500 MHz● Frequency & Level Control● Directly PC Programmable● +10 dBm Output Power● +/-1 ppm Stability● Low Cost & Compact Size● Wide Tuning Ranges● Low Phase Noise● Non-Volatile Memory● Buffered RF Output● Turn-key Operation

General Specifications (also see options)Output Frequency 45 MHz to 2500 MHz in rangesFrequency Stability +/-1ppm max. over 0+50CInternal Ref. Aging +/-1ppm/yearInternal Ref. Accuracy +/-1ppm @ +23 +/-1deg.CInternal Ref. Frequency 10 MHz for 25, 50 & 100 KHz step models

9.6 MHz for 30 KHz step modelsInternal Ref. Output 0 to +2dBm into 50 ohmsExternal Ref. Frequency Up to 40 MHz depending on modelExternal Ref. Level 0.6-2.5 VppExternal Ref. Impedance 600 ohms in parallel with 25pFReference Select Miniature Toggle SwitchOutput Power +8dBm min., +10dBm typ.Level Control Range 25dB min in 31 stepsInput Voltage +17 to +24 V d.c. @ 110 mAOperating Temperature 0+50C (see options)Storage Temperature -20+70CLock Time 2 to 6 msec typ.Status LEDs (green) RF On, Phase Lock, DC AppliedRF Output Connector SMA femaleRef. Connector SMA femaleInput Power Connector 1.3 x 9.0mm centre positive jackData Connector DB-9PRF Output Modes Continuous, Momentary & ToggledOutput Impedance 50 ohmsSize 90 x 70 x 20mmWeight 170gHousing Aluminium with Black Epoxy Paint

Equipment Supplied as Standard

Synthesised SourcePower Supply (Euro, UK or US style)Control Software (CD)Special Parallel Port CableOperating Manual (CD)Spare DC Connector

PC Requirements

IBM compatible 386 or higher PCRunning Windows 3.1 or higher4-8 MB RAM5MB Hard Disk SpaceCD Rom640 x 480 Res. Monitor25 Pin, D-Sub, EPP or SPP Parallel Port

Custom Options:-

Delete Power SupplyCustom Frequency Range (subject to restrictions)Custom Step Size (subject to restrictions)Wider Temperature Range (-20+65C with +/-2ppm & +7dBm)Mounting PlateInstrument or Rack Mounting inSingle or Multiple Units

We reserve the right to changestandard product specificationswithout notice, but will be pleased toconsider control drawings forquotation.

Model Freq. Freq. Freq. Output Harmonics Spurious Phase Noise(typ) Current

No. Range Steps Stability Power(typ) @1KHz @10KHz @100KHz @+18V d.c.

MHz KHz ppm dBm dBc dBc dBc/Hz dBc/Hz dBc/Hz mA

ANS2-0045-025 45 - 65 25 ±1 +10 -35 -60 -80 -100 -115 110

ANS2-0065-050 65 - 95 50 ±1 +10 -35 -60 -80 -100 -115 110

ANS2-0080-050 80 - 120 50 ±1 +10 -35 -60 -80 -100 -115 110

ANS2-0110-100 110 - 160 100 ±1 +10 -35 -60 -80 -95 -110 110

ANS2-0160-100 160 - 220 100 ±1 +10 -35 -60 -75 -85 -110 110

ANS2-0220-100 220 - 320 100 ±1 +10 -35 -60 -75 -85 -110 110

ANS2-0320-100 320 - 500 100 ±1 +10 -35 -60 -70 -80 -110 110

ANS2-0500-100 500 - 800 100 ±1 +10 -35 -60 -70 -75 -110 110

ANS2-0800-030 800 - 1200 30 ±1 +10 -35 -60 -65 -75 -110 110

ANS2-0800-100 800 - 1200 100 ±1 +10 -35 -60 -65 -75 -110 110

ANS2-1000-100 1000 - 1500 100 ±1 +10 -35 -60 -65 -75 -110 110

ANS2-1500-100 1500 - 2000 100 ±1 +10 -35 -60 -60 -75 -110 110

ANS2-1700-100 1700 - 2200 100 ±1 +10 -35 -60 -60 -70 -105 110

ANS2-2000-100 2000 - 2500 100 ±1 +10 -35 -60 -60 -70 -105 110




The ANS3 series of programmable, synthesised RF signal sourcesfeature frequency and level control with modulation and, with astandard office PC, provide a turn-key solution to the provision ofvariable frequency sources for both systems and test equipmentapplications.Directly connecting to the PC serial port, each unit can be set tofrequencies within ranges listed below and at levels up to 8dBmvia an easy to use control panel software and the non volatilememory enables the selected settings to be retained in the standalone unit.Each unit contains a +/-1ppm stability reference TCXO but canalso be used with an external reference. The sources are suppliedcomplete with a 9V d.c. wall mount power supply, operatingsoftware and special interface cable.

PC PROGRAMMABLE SOURCES - ANS3 Series

● 800 MHz to 5875 MHz● Frequency & Level Control● With Modulation/Trigger● Directly PC Programmable - RS232● 1KHz Steps● 8dBm Output Power● +/-1 ppm Stability● Low Cost & Compact Size● Wide Tuning Ranges● Low Phase Noise● Non-Volatile Memory

General Specifications (also see options)Output Frequency 800 MHz to 5875 MHz in rangesFrequency Stability +/-1ppm max. over 0+50CInternal Ref. Aging +/-1ppm max./yearInternal Ref. Accuracy +/-1ppm @ +23 +/-2 deg.CInternal Ref. Frequency 10 MHzInternal Ref. Output 0 to +2dBm into 50 ohmsExternal Ref. Frequency Up to 40 MHz depending on modelExternal Ref. Level 0.6-2.5 VppExternal Ref. Impedance 600 ohms in parallel with 25pFReference Select Miniature Toggle SwitchOutput Power +5dBm min., +8dBm typ.Level Control Range 25dB min in 31 stepsControl Interface Serial RS-232Modulation Rate 1 KHz internal

50KHz max. externalModulation Deviation +/-1.25 MHzInput Voltage +9 to +15 V d.c. @ 175 mAOperating Temperature 0+50CStorage Temperature -20+70CLock Time 2 to 6 msec. typ.Status LED’s (green) RF On, Phase Lock, DC AppliedRF Output Connector SMA femaleRef. Connector SMA femaleTrigger/Modulation Connector SMA femaleInput Power Connector 1.3 x 9.0mm centre positive jackData Connector DB-9PRF Output Modes Continuous, Momentary & ToggledOutput Impedance 50 ohmsSize 102 x 70 x 19mmWeight 170gHousing Aluminium with White Epoxy Paint

Model

No.

Freq.

Range

MHz

Freq.

Steps

KHz

Freq.

Stability

ppm

Output

Power (typ)

dBm

Harmonics

dBc

Spurious

dBc

@1KHz

dBc/Hz

@10KHz

dBc/Hz

@100KHz

dBc/Hz

Current

@+9V d.c.

mA

Phase Noise (typ)

ANS3-0800-001

ANS3-1200-001

ANS3-1750-001

ANS3-2400-001

ANS3-3400-001

ANS3-3700-001

ANS3-5150-001

ANS3-5470-001

800-1200

1200-2000

1750-2500

2400-3400

3400-3700

3700-4200

5150-5350

5470-5875

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

±1

±1

±1

±1

±1

±1

±1

±1

+8

+8

+8

+8

+8

+8

+8

+8

-35

-35

-35

-35

-35

-35

-35

-35

-60

-60

-60

-60

-60

-60

-60

-60

-77

-73

-72

-72

-70

-67

-67

-61

-80

-82

-82

-78

-78

-75

-75

-71

-106

-105

-108

-102

-109

-103

-103

-96

175

175

175

175

175

175

175

175

Equipment Supplied as Standard

Synthesised SourcePower Supply (Euro, UK or US style)Control Software (CD)Special Serial Port CableOperating Manual (CD)Spare DC Connector

PC Requirements

Pentium, Equivalent or HigherRunning Windows 95 or higher16 MB RAM25 MB Hard Disk SpaceCD Rom9 Pin, D-Sub, Serial Port

Custom Options:-

Delete Power SupplyCustom Frequency Range(subject to restrictions)Custom Step Size (subject to restrictions)Mounting PlateInstrument or Rack Mounting inSingle or Multiple Units

We reserve the right to changestandard product specificationswithout notice, but will be pleasedto consider control drawings forquotation.




21

VOLTAGE CONTROLLED OSCILLATORS(V.C.O.)

Model

No.

AV - 106 - 206AV - 116 - 226AV - 226 - 506AV - 306 - 506AV - 406 - 806

AV - 506 - 856AV - 506 - 107AV - 606 - 127AV - 756 - 157AV - 107 - 207

AV - 127 - 187AV - 157 - 307AV - 207 - 407AV - 227 - 407AV - 257 - 507

AV - 307 - 457AV - 327 - 647AV - 357 - 457AV - 407 - 457AV - 407 - 607

AV - 407 - 707AV - 407 - 807AV - 457 - 517AV - 507 - 907AV - 507 - 108

AV - 607 - 108AV - 667 - 128AV - 687 - 148AV - 707 - 148AV - 707 - 108

AV - 807 - 148AV - 807 - 168AV - 807 - 967AV - 907 - 168AV - 907 - 188

AV - 957 - 148AV - 108 - 148AV - 108 - 188AV - 108 - 208AV - 128 - 208

AV - 138 - 238AV - 148 - 218AV - 158 - 258AV - 178 - 198AV - 208 - 308

AV - 208 - 328AV - 238 - 308AV - 248 - 378AV - 258 - 408AV - 278 - 338

AV - 308 - 358AV - 308 - 408AV - 368 - 428AV - 368 - 438

Frequency

Range

(MHz)

10 - 2011 - 2525 - 5030 - 5040 - 80

50 - 8550 - 10060 - 12075 - 150

100 - 200

120 - 175150 - 300200 - 400225 - 400250 - 500

300 - 450320 - 640350 - 450400 - 450400 - 600

400 - 700400 - 800450 - 512500 - 900

500 - 1000

600 - 1000660 - 1200680 - 1360700 - 1400750 - 1000

800 - 1400800 - 1600806 - 960

900 - 1600900 - 1800

950 - 13501000 - 14001000 - 18001000 - 20001200 - 2000

1300 - 23001400 - 21001500 - 25001700 - 19002000 - 3000

2000 - 32002300 - 30002400 - 37002500 - 40002700 - 3300

3000 - 35003000 - 40003600 - 42003600 - 4300

Tuning

Voltage

(Vdc)

+20+20+20+15+20

+15+20+20+20+20

+15+20+20+18+20

+13+20+12+10+12

+18+20+4

+18+20

+18+18+20+20+12

+14+20+4

+15+20

+15+10+18+20+20

+20+18+18+4

+18

+18+18+18+18+15

+10+19+10+10

Frequency

Pulling@12dB

R/L(MHz Typ.)

0.51.02.02.02.0

2.02.02.02.53.0

3.05.08.08.08.0

10.010.010.010.010.0

12.014.010.015.017.0

17.017.017.017.017.0

17.020.020.020.020.0

20.020.020.020.025.0

25.025.030.012.030.0

35.030.030.035.030.0

35.040.035.035.0

Frequency

Pushing

(MHz/V)

0.10.10.20.30.3

0.30.30.30.30.5

0.51.02.02.02.0

2.02.52.52.02.0

2.02.04.04.04.0

4.04.04.06.06.0

6.06.06.06.07.0

7.07.07.08.08.0

8.08.08.06.08.0

12.08.0

10.012.010.0

12.015.015.015.0

Harmonics

(dBc Max)

-10-10-10-10-10

-10-10-10-10-10

-10-10-10-10-10

-10-10-10-10-10

-10-10-10-10-10

-10-10-10-10-10

-10-10-10-10-10

-10-10-10-10-10

-10-10-10-10-10

-10-10-10-10-10

-10-10-10-10

Ouput

Power

(dBm Min)

+11+11+11+11+11

+11+11+11+11+10

+10+10+10+10+10

+10+10+10+10+10

+10+10+7

+10+10

+10+10+10+10+10

+10+10+7

+10+10

+10+10+10+10+10

+10+10+10+5

+10

+10+10+10+10+10

+10+10+10+10

Voltage

(Vdc)

+12+12+12+12+12

+12+12+12+12+12

+12+12+12+12+15

+15+15+15+15+15

+15+15+5

+15+15

+15+15+15+15+15

+15+15+5

+15+15

+15+15+15+15+15

+15+15+15+5

+15

+15+15+15+15+15

+15+15+15+15

Current

(mA Max)

2525252525

2525252525

2525353535

3535353535

3535353535

3535353535

3535353535

3535353535

3535353535

3535353535

35353535

Phase Noise

@100 KHz

(dBc/Hz Typ.)

-125-125-125-125-125

-125-125-125-125-125

-125-125-125-125-123

-123-121-123-123-120

-120-118-120-117-117

-115-115-113-115-115

-113-113-115-113-113

-113-112-112-112-112

-110-110-110-110-106

-105-103-103-103-105

-100-100-100-100

● 10 MHz to 12.0 GHz● Miniature Size● Hyper Abrupt● Low Noise● Choice of Package

General SpecificationsOperating Temp Range

Standard -20 +70COptional -55 +85C

Frequency Variation with Temperature 0.03%/deg. C typ.Power Variation with Temperature 0.01dB/deg. C typ.Specifications are at +25C case temperature

Input Power

From 4.0 GHz to 12.0 GHz please advise details of your requirement for a specific quotation.

Aternative Packages - See Reverse,Surface Mount, Flat-Pack, Connectorised, Hermetic

0.300 (7.6)TYP.

0.450(11.4)

0.150(3.8)TYP.

0.500(12.7)

P3

P1

P2 P4

0.10 (2.5)DIA.

CLEARANCE

0.150(3.8)MIN.

0.017(.45)

0.030(.76)

0.170(4.3)

Metal case isgrounded and bright

electro tin plated

This areais ground

P1 = VccP2 = VtP3 = GNDP4 = RF OUT

BOTTOM VIEW

All dimensions in inches (mm)

TO-8 PACKAGE

Custom Options:-

1. Aternative Input Voltages; 5 to 20V 2. Negative Tuning Voltage or Dual Polarity 3. High Reliability ScreeningPlease contact us for any other special requirements




~

~

0.500(12.7)

0.500(12.7) 0.180

(4.6)

0.000

0.100(2.5)

0.200(5.1)

0.300(7.6)

0.400(10.2)

0.500(12.7)SEE

NOTE1

0.50

0(1

2.7)

0.38

5(9

.8)

0.28

5(7

.3)

0.18

5(4

.7)

0.08

5(2

.2)

0.00

0

0.000

0.115(2.9)

0.215(5.5)

0.315(8.0)

0.415(10.5)

0.500(12.7)

0.50

0(1

2.7)

0.42

0(1

0.7)

0.32

0(8

.1)

0.22

0(5

.6)

0.12

0(3

.0)

0.00

0

SEENOTE

2 SEENOTE

3

SEE DETAIL

(Metal Case)

0.060 (1.5)

0.095 (2.4)

0.130 (3.3)

0.060 (1.5)

DETAIL VIEW

BOTTOM VIEWSIDE VIEWTOP VIEW

MS PACKAGE

PINASSIGNMENTSP1 VtP2 RF OUTP3 Vcc

0.500(12.7)

0.500(12.7) 0.180

(4.6)

SEENOTE

1

SEE DETAIL

(Metal Case)

0.060 (1.5)

0.095 (2.4)

0.130 (3.3)

0.060 (1.5)

DETAIL VIEW

BOTTOM VIEWSIDE VIEWTOP VIEW

SM PACKAGE

SMA PACKAGE

PINASSIGNMENTSP1 RF OUTP2 VtP3 Vcc

0.000

0.150(3.8)

0.250(6.4)

0.350(8.9)

0.00

0

0.35

0(8

.9)

0.25

0(6

.4)

0.15

0(3

.8)

SEE NOTE 3

SEE NOTE 2

NOTE1. The metal case is composed of nickel and is soldered to the grounded surface of the VCO.2. This area is a grounded surface and is solder plated and reflowed.3. Radial surfaces are plated vias to feed thru ground, Vcc, VT, and RF out.

0.62

0(1

5.7)

1.12

5(2

8.6)

0.00

0

0.00

0

0.26

0(6

.6)

0.62

0(1

5.7)

0.00

0

0.36

0(9

.1)

1.050(26.7)

0.000

0.525(13.3)

1.050(26.7)

0.000

0.850(21.2)

0.36

0(9

.1)

0.00

0

0.16

0(1

4.1)0.98

5(2

5.0)

0.00

0

0.14

0(3

.6)

1.12

5(2

8.6)

1.050 (26.7)

0.000

0.140 (3.6)

0.910 (23.1)MTG HOLES2.56 x 0.15 DEEP4 PLACES

PART NUMBERING

Model NoPackage Style

AV - 106 - 206 - MS

Vcc

Gnd

Vt

P3

P1

P2

P3

P1P2

RF




23

MINIATURE AMPLIFIERS - DROP-IN

● 1.8 - 26.0 GHz● Miniature Size● Cascadable● Removable Connectors● High Reliability● Open/Short Protected● Internal Voltage Regulator● Reverse Voltage Protected● Unconditionally Stable● 2 Year Warranty

ALL DIMENSIONS ARE IN INCHES (mm)Custom frequency ranges, specifications and configurations arealso available. We reserve the right to change standard product specificationswithout notice but will be pleased to consider control drawings forquotation.

Gain

dB(min)

Gain

Flatness

± dB(max)

Output

@1dB GCP

dBm(min)

Noise

Figure

dB(max)

Input

Voltage

Vdc(typ)

Input

Current

mA

Fig.Model

No.

Freq.

Range

(GHz)

VSWR

Input & Output

AGM-1001AGM-1002AGM-1003AGM-1004

AGM-1005AGM-1006AGM-1007AGM-1008

AGM-1009AGM-1010

AGM-2001AGM-2002AGM-2003AGM-2004

AGM-2005AGM-2006AGM-2007AGM-2008

AGM-2009AGM-2010AGM-2011AGM-2012

AGM-2013AGM-2014

AGM-3001AGM-3002AGM-3003AGM-3004

AGM-3005AGM-3006AGM-3007AGM-3008

AGM-3009AGM-3010AGM-3011AGM-3012

1.8-2.42.0-6.04.0-8.04.0-8.0

8.0-12.08.0-12.09.0-10.0

12.0-18.0

13.75-14.5018.0-26.0

2.0-4.03.7-4.24.4-5.05.3-5.9

5.9-6.45.9-6.46.4-7.27.1-7.7

7.25-7.757.0-11.08.0-12.08.0-12.0

12.0-18.013.75-14.5

2.0-4.02.0-4.04.0-8.04.0-8.0

5.9-6.48.0-10.08.0-12.0

10.5-15.0

12.7-13.212.4-18.0

13.75-14.513.75-14.5

9.015.07.0

12.0

10.010.09.08.5

9.04.5

22.014.014.014.0

14.027.014.014.0

25.015.016.024.0

18.018.0

40.048.032.045.0

40.033.035.020.0

20.024.020.027.0

15.016.027.020.0

20.012.010.020.0

20.010.0

9.030.030.030.0

30.020.030.030.0

10.010.017.020.0

20.020.0

20.019.020.019.0

20.010.020.020.0

13.017.020.018.0

5.03.57.03.5

5.02.52.55.0

5.05.0

2.78.08.08.0

8.05.08.08.0

4.56.04.55.0

6.05.0

3.03.04.04.0

5.04.05.05.0

2.74.55.05.0

2.0:12.0:12.0:12.0:1

2.0:12.0:12.0:12.0:1

2.0:12.0:1

2.0:12.0:12.0:12.0:1

2.0:12.0:12.0:12.0:1

2.0:12.0:12.0:12.0:1

2.0:12.0:1

2.0:12.0:12.0:12.0:1

2.0:12.0:12.0:12.0:1

2.0:12.0:12.0:11.5:1

1.8:11.8:11.8:11.8:1

1.8:11.8:11.5:11.8:1

1.5:11.8:1

1.8:11.8:11.8:11.8:1

1.8:11.5:11.8:11.8:1

1.5:11.8:11.8:11.8:1

1.8:11.5:1

1.8:11.8:11.8:11.8:1

1.5:11.8:11.8:11.8:1

1.5:11.8:11.5:11.4:1

9-159-15

12-159-15

9-159-159-159-15

9-159-15

9-1512-1512-1512-15

12-159-15

12-1512-15

9-159-159-159-15

9-159-15

9-159-159-159-15

9-159-159-159-15

9-159-159-159-15

6565

23080

801006080

8080

100900900900

900160900900

150180240160

180160

400220325220

250160250225

200220225175

S-1S-1C-1C-1

X-1X-1X-1X-1

X-1X-1

S-2S-2C-2C-2

C-2C-2C-2C-2

C-2X-2X-2X-2

X-2X-2

S-3S-3C-3C-3

C-3X-3X-3X-3

X-3X-3X-3X-3

0.750.750.750.75

0.750.750.750.75

0.50.75

1.01.01.01.0

1.00.751.01.0

1.01.01.01.0

1.00.75

1.51.51.51.5

1.01.51.51.5

1.01.51.01.0

(max)

The AGM series of miniature amplifiers utilise thin film and MMIC technology to provide very versatile and reliable gain modules for microwaveapplications in communications, radar and defence equipment. Each amplifier can be used either as a modular unit with the SMA female connectorsfitted or inserted directly into a microwave assembly with the connectors removed. In addition to the standard models listed, custom units can beoffered to meet the requirements of specific applications.Specification Temperature +25C Operating Temperature -55+85C Baseplate



Section 4Active Components24

G

+VDC

RFIN

RFOUT

MOUNTING HOLES.07 (1.8) THRU, 2 PLCS

REMOVABLE SMATO MIL-C-39012, 2 PLCS

AH

C

F B

DE

.06 (1.55)

+VDC



AE

G

.061 (1.5)

C

F RFIN

RFOUT

H

D

B

+VDC



A

G

C

F RFIN

RFOUT

H

E

B

D

1 STAGE AMPLIFIERA B C D E F G H

S-1 .57(14.5) .99(25.1) .22(5.6) .63(16.0) .27(6.9) .86(21.8) .29(7.4) .10(2.5)

C-1 .57(14.5) .96(24.4) .22(5.6) .52(13.2) .31(7.9) .83(21.1) .29(7.4) .10(2.5)

X-1 .50(12.7) .78(19.8) .22(5.6) .38(9.7) .27(6.9) .65(16.5) .25(6.4) .10(2.5)


S-2 .906(24.4) .990(25.1) .22(5.6) .630(16.0) .334(8.5) .868(22.0) .286(7.3) .10(2.5)

C-2 .906(24.4) .956(24.3) .22(5.6) .524(13.3) .334(8.5) .834(21.2) .234(6.0) .10(2.5)

X-2 .760(19.3) .766(19.5) .22(5.6) .381(9.7) .260(6.6) .654(16.6) .250(6.4) .10(2.5)


S-3 1.239(31.5) .990(25.1) .22(5.6) .630(16.0) .270(6.9) .868(21.9) .667(16.9) .10(2.5)

C-3 1.239(31.5) .960(24.4) .22(5.6) .524(13.3) .312(25.4) .834(21.2) .667(16.9) .10(2.5)

X-3 1.02(25.9) .776(19.7) .22(5.6) .381(9.7) .275(7.0) .654(16.6) .520(13.2) .10(2.5)



Section 4Active Components

25

COAXIAL ISOLATORS - STANDARD BANDSACI-20000 Series

● 800 MHz – 23 GHz

● Octave & Standard Bands

● Compact Design

● Internal Load

● Fast Delivery

● SMA Connectors

The ACI-20000 series of coaxial isolators aredesigned for low power applications incommunications, test & measurement and scientificresearch applications requiring good RF performancein a compact and economic package.

Part NumberingACI-20010 -X-X

Model NumberInput ConnectorOutput ConnectorConnector Types

SF=SMA FemaleSM=SMA Male

B

CA

Input Output

General SpecificationsIsolator Load Internal 50 ohmHousing Material Aluminium AlloyMagnet Cover Plates Nickel Plated SteelConnectors Gold PlatedStandard Connectors SMA FemaleConnector Options SMA Male

Also Available :-Higher Input Power and Load Rating.3 Port Standard Band Circulators to 23GHz, ACC-20000 Series.Narrow Band High Performance Isolators & Circulators.Waveguide Isolators and Circulators to 40GHz.Drop-In and Microstrip Isolators and Circulators to 26GHz.

Custom frequency ranges, specifications and configurations may also be reviewed forquotation. These are often just as economic as standard models but may not be in stock.To obtain a quotation for a custom isolator please provide details of the specificationrequired, as follows:-Frequency Range, Isolation, Insertion Loss, VSWR, Input Power, Load Rating,Temperature Range, Input & Output Connectors plus any additional relevant parameters.

We reserve the right to change standard product specifications without notice but will bepleased to consider control drawings for quotation.

IsolatorModel

No.

Freq.RangeGHz

Isolation

dB (min)

InsertionLoss

dB (max)

VSWR

:1 (max)

ForwardPowerWatts

OperatingTemperature

deg. C A B C

Dimensions (mm)

ACI-20010ACI-20020ACI-20030ACI-20040ACI-20050






0.8-1.20.95-1.450.95-1.951.0-2.01.2-1.7

1.7-2.42.0-4.02.2-2.72.5-3.52.7-3.2

3.0-6.03.4-4.24.0-8.05.8-6.55.85-6.725

6.0-12.07.25-7.757.9-8.48.0-9.58.0-12.0

8.0-16.08.0-18.08.5-9.610.0-15.010.7-12.75

12.0-18.013.75-14.515.0-18.017.3-18.421.2-23.6

1816141720

2018202020

1720182320

1823232018

1816232023

1723202020

0.60.70.70.70.6

0.50.60.50.60.4

0.60.40.60.30.4

0.60.30.30.350.5

0.61.00.350.50.4

0.50.40.50.50.5

1.31.41.551.351.2

1.21.351.21.251.2

1.41.21.351.21.2

1.351.21.21.21.35

1.351.41.21.31.2

1.31.21.31.251.25

2020202020

205

202020

105555

555

105

55555

55

2010

5

LoadRatingWatts

55

1055

51555

21111

11111

11111

11522

-30+65-30+65-20+55-30+65-30+65

-30+65-10+65-30+65-10+40-30+65

-10+55-10+65-25+65-35+65-10+60

-30+65-30+65-30+65-10+60-30+65

-30+65-30+65

0+70-20+60-30+65

-20+60-30+65-30+65-30+65-30+65

50.040.064.068.034.0

32.032.032.028.025.0

25.416.020.016.016.0

12.012.012.012.012.0

12.015.012.012.012.0

12.012.012.012.013.0

54.050.076.072.039.0

39.034.039.036.029.5

34.526.026.026.026.0

20.020.020.020.020.0

20.023.020.020.020.0

20.020.020.020.019.0

24.021.026.028.022.0

20.018.020.019.015.0

13.015.014.013.015.0

13.013.013.013.013.0

13.013.013.013.013.0

13.013.013.013.010.0

Dimension B Includes Load



Section 5Passive Components26

COAXIAL CIRCULATORS - STANDARD BANDSACC-20000 Series

● 800 MHz – 23 GHz

● Octave & Standard Bands

● Compact Design

● Internal Load

● Fast Delivery

● SMA Connectors

The ACC-20000 series of coaxial isolators aredesigned for low power applications incommunications, test & measurement andscientific research applications requiring good RFperformance in a compact and economic package.

Part NumberingACC-20010 -X-X-X

Model NumberConnector 1Connector 2Connector 3Connector Types SF=SMA Female

SM=SMA Male

B

CA

1 2

3

General SpecificationsHousing Material Aluminium AlloyMagnet Cover Plates Nickel Plated SteelConnectors Gold PlatedStandard Connectors SMA FemaleConnector Options SMA Male

Also Available :-Higher Input Power.Standard Band Isolators to 23GHz, ACI-20000 Series.Narrow Band High Performance Isolators & Circulators.Waveguide Isolators and Circulators to 40GHz.Drop-In and Microstrip Isolators and Circulators to 26GHz.

Custom frequency ranges, specifications and configurations may also be reviewed forquotation. These are often just as economic as standard models but may not be in stock.To obtain a quotation for a custom circulator please provide details of the specificationrequired, as follows:-Frequency Range, Isolation, Insertion Loss, VSWR, Input Power, Temperature Range, Connectors plus any additional relevant parameters.

We reserve the right to change standard product specifications without notice but will bepleased to consider control drawings for quotation.

IsolatorModel

No.

Freq.RangeGHz

Isolation

dB (min)

InsertionLoss

dB (max)

VSWR

:1 (max)

ForwardPowerWatts

OperatingTemperature

deg. C A B C

Dimensions (mm)

ACC-20010ACC-20020ACC-20030ACC-20040ACC-20050






0.8-1.20.95-1.450.95-1.951.0-2.01.2-1.7

1.7-2.42.0-4.02.2-2.72.5-3.52.7-3.2

3.0-6.03.4-4.24.0-8.05.8-6.55.85-6.725

6.0-12.07.25-7.757.9-8.48.0-9.58.0-12.0

8.0-16.08.0-18.08.5-9.610.0-15.010.7-12.75

12.0-18.013.75-14.515.0-18.017.3-18.421.2-23.6

1818151720

2018202020

1720182320

1823232018

1816232023

1723202020

0.60.50.60.70.6

0.50.60.50.60.4

0.60.40.60.30.4

0.60.30.30.350.5

0.61.00.350.50.4

0.50.40.50.50.5

1.31.251.41.351.2

1.21.351.21.251.2

1.41.21.351.21.2

1.351.21.21.21.35

1.351.41.21.31.2

1.31.21.31.251.25

2020202020

205

202020

105555

555

105

55555

55

2010

5

-30+65-30+65-20+55-30+65-30+65

-30+65-10+65-30+65-10+40-30+65

-10+55-10+65-25+65-35+65-10+60

-30+65-30+65-30+65-10+60-30+65

-30+65-30+65

0+70-20+60-30+65

-20+60-30+65-30+65-30+65-30+65

50.068.080.068.034.0

32.032.032.028.025.0

25.416.020.016.016.0

12.012.012.012.012.0

12.015.012.012.012.0

12.012.012.012.013.0

50.068.080.068.034.0

32.032.032.028.025.0

25.416.020.016.016.0

12.012.012.012.012.0

12.015.012.012.012.0

12.012.012.012.013.0

24.028.028.028.022.0

20.018.020.019.015.0

13.015.014.013.015.0

13.013.013.013.013.0

13.013.013.013.013.0

13.013.013.013.010.0



Section 5Passive Components

27

DIRECTIONAL COUPLERS - OCTAVE BAND

● 0.5 - 18.0 GHz● Miniature Size● High Directivity● Low VSWR● RF Shielded● Robust Construction

.25(6.4)

.375(9.5)TYP

.22(5.6)

D

0.07 (1.8)

C

A

.120 (3.0) ±.003 (.08) DIA

.25(6.4)

.38(9.7)

.19(4.8)

B

.65 (16.51) MAX

TYPE SMASTAINLESS STEEL

FEMALE CONNECTOR

General SpecificationsDesign: StriplineCircuit: PTFE BasedHousing: AluminiumConnectors: SMA to MIL-C-39012

N & TNC OptionalTemperature: -55 +105CFinish: Blue or Grey Paint

Other Finishes Optional


Custom frequency ranges, specifications and configurations are also available.We reserve the right to change standard product specifications without notice but will bepleased to consider control drawings for quotation.

(1) Includes frequency sensitivity

Specification Temperature +25C

ModelNo.

Freq.Range(GHz)

Coupling(1)

(dB)

Freq.Sensitivity

(dB)ExcludingCoupledPower

True Pri.Line

Sec.Line

Avg.Incident(Watts)

Avg.Reflected

(Watts)

Peak(kW)

Fig.

Power

A3202-6A3202-10A3202-20A3202-30

A3203-6A3203-10A3203-20A3203-30

A3204-6A3204-10A3204-20A3204-30

A3245-6A3245-10A3245-20A3245-30

A3205-6A3205-10A3205-20A3205-30

A3206-6A3206-10A3206-20A3206-30

A3267-6A3267-10A3267-20A3267-30

A3207-6A3207-10A3207-20A3207-30

0.5 - 10.5 - 10.5 - 10.5 - 1

1 - 21 - 21 - 21 - 2

2 - 42 - 42 - 42 - 4

2.6 - 5.22.6 - 5.22.6 - 5.22.6 - 5.2

4 - 84 - 84 - 84 - 8

7 - 12.47 - 12.47 - 12.47 - 12.4

7.5 - 167.5 - 167.5 - 167.5 - 16

12.4 - 1812.4 - 1812.4 - 1812.4 - 18

6 ± 1.0010 ± 1.2520 ± 1.2530 ± 1.25

6 ± 1.0010 ± 1.2520 ± 1.2530 ± 1.25

6 ± 1.0010 ± 1.2520 ± 1.2530 ± 1.25

6 ± 1.0010 ± 1.2520 ± 1.2530 ± 1.25

6 ± 1.0010 ± 1.2520 ± 1.2530 ± 1.25

6 ± 1.0010 ± 1.0020 ± 1.0030 ± 1.00

6 ± 1.0010 ± 1.2520 ± 1.2530 ± 1.25

6 ± 1.0010 ± 1.0020 ± 1.0030 ± 1.00

± 0.60± 0.75± 0.75± 0.75

± 0.60± 0.75± 0.75± 0.75

± 0.60± 0.75± 0.75± 0.75

± 0.60± 0.75± 0.75± 0.75

± 0.60± 0.75± 0.75± 0.75

± 0.50± 0.50± 0.50± 0.50

± 0.60± 0.75± 0.75± 0.75

± 0.50± 0.50± 0.50± 0.50

0.200.200.150.15

0.200.200.150.15

0.200.200.200.15

0.200.200.200.20

0.250.250.250.25

0.300.300.300.30

0.600.600.500.50

0.600.600.500.50

1.800.800.200.20

1.800.800.200.20

1.800.800.200.20

1.800.800.250.20

1.900.900.300.25

2.001.000.350.30

2.201.200.550.50

2.201.200.550.50

25252525

25252525

22222222

20202020

20202020

17171717

12121515

15151515

1.151.101.101.10

1.151.101.101.10

1.151.151.151.15

1.251.251.251.25

1.251.251.251.25

1.301.301.301.30

1.351.351.351.35

1.301.301.301.30

1.151.101.101.10

1.151.101.101.10

1.151.151.151.15

1.251.251.251.25

1.251.251.251.25

1.301.301.301.30

1.401.401.401.40

1.401.401.401.40

50505050

50505050

50505050

50505050

50505050

50505050

50505050

50505050

25

5050

25

5050

25

5050

25

5050

25

5050

25

5050

25

5050

25

5050

3333

3333

3333

3333

3333

3333

2222

1111

1112

3334

5556

7778

7778

7779

7799

7799

Directivity(dB Min)

FIG.

123456789

A

3.10 (78.8)3.10 (78.8)1.78 (45.2)1.78 (45.2)1.16 (29.5)1.16 (29.5)1.00 (25.4)1.00 (25.4)1.00 (25.4)

B

0.50 (12.7)0.55 (14.0)0.50 (12.7)0.55 (14.0)0.50 (12.7)0.55 (14.0)0.50 (12.7)0.55 (14.0)0.60 (15.3)

C

1.50 (38.1)1.50 (38.1)0.94 (23.9)0.94 (23.9)0.34 (8.6)0.34 (8.6)

N/AN/AN/A

D

N/AN/AN/AN/AN/AN/A

0.50 (12.7)0.50 (12.7)0.50 (12.7)

Insertion Loss(dB Max)

VSWR (Max)




DIRECTIONAL COUPLERS - BROADBAND

● 0.5 - 18.0 GHz● Miniature Size● High Directivity● Low VSWR● RF Shielded● Robust Construction

.25(6.4)

.375(9.5)TYP

F

E

D

A

DIA. H

I

.25(6.4)

TYPE SMA STAINLESS STEELFEMALE CONNECTOR

C

C/2

BJ

.65 (16.51)MAX

G

General SpecificationsDesign: StriplineCircuit: PTFE BasedHousing: AluminiumConnectors: SMA to MIL-C-39012

N & TNC OptionalTemperature: -55 +105CFinish: Blue or Grey Paint



Custom frequency ranges, specificationsand configurations are also available.We reserve the right to change standardproduct specifications without notice but willbe pleased to consider control drawings forquotation.

(1) Includes frequency sensitivity(2) Coupling relative to output power(3) 2-56NC-2B x 0.12 deep


ModelNo.

Freq.Range(GHz)

Coupling(1)

(dB)

Freq.Sensitivity

(dB)ExcludingCoupledPower

True Pri.Line

Sec.Line

Avg.Incident(Watts)

Avg.Reflected

(Watts)

Peak(kW)

Fig.

Power

A2023-6A2023-10A2023-20

A4224-10

A2034-6A2034-10A2034-20

A4238-10A4238-16A4238-20

A2045-6A2045-10A2045-20

A4248-6A4248-10A4248-16A4248-20

A2056-6A2056-10A2056-20

A4258-6A4258-10A4258-20

A2068-10

0.5 - 20.5 - 20.5 - 2

0.6 - 4

1 - 41 - 41 - 4

1 - 18 (2)1 - 18 (2)1 - 18 (2)

2 - 82 - 82 - 8

2 - 18 (2)2 - 18 (2)2 - 18 (2)2 - 18 (2)

4 - 12.44 - 12.44 - 12.4

4 - 184 - 184 - 18

7 - 18

6 ± 1.0010 ± 1.0020 ± 1.00

10 ± 1.00

6 ± 1.0010 ± 1.0020 ± 1.00

10 ± 1.0016 ± 1.0020 ± 1.00

6 ± 1.0010 ± 1.0020 ± 1.00

6 ± 1.0010 ± 1.0016 ± 1.0020 ± 1.00

6 ± 1.0010 ± 1.0020 ± 1.00

6 ± 1.0010 ± 1.0020 ± 1.00

10 ± 1.25

± 0.75± 0.75± 0.75

± 0.75

± 0.50± 0.50± 0.50

± 0.50± 0.50± 0.50

± 0.30± 0.30± 0.40

± 0.50± 0.50± 0.50± 0.50

± 0.30± 0.30± 0.40

± 0.50± 0.50± 0.50

± 0.75

0.350.350.35

0.40

0.350.350.40

0.900.800.80

0.500.350.40

0.900.800.800.80

0.500.500.50

0.900.800.60

0.60

2.000.900.40

0.90

2.000.900.45

1.500.900.90

2.201.000.45

2.001.300.900.90

2.201.200.55

2.001.000.70

1.10

232323

18

232323

1-12.4 12.4-18

15 1215 1215 12

202020

2-12.4 12.4-18

15 1215 1215 1215 12

171717

4-12.4 12.4-18

15 1215 1215 12

15

1.201.201.20

1.25

1.201.201.20

1.401.401.40

1.251.251.25

1.351.351.351.35

1.301.301.30

1.351.351.40

1.35

1.201.201.20

1.30

1.201.201.20

1.501.501.50

1.251.251.25

1.501.501.401.40

1.301.301.30

1.401.401.40

1.40

505050

50

505050

252525

505050

25252525

505050

252525

50

25

50

5

25

50

52025

25

50

25

2025

25

50

25

25

5

333

3

333

333

333

3333

333

333

3

112

10

334

111212

556

13131414

778

151516

9

Directivity(dB Min)

FIG.

123456789

10111213141516

A

3.60 (91.5)3.60 (91.5)2.90 (73.7)2.90 (73.7)1.78 (45.2)1.88 (47.8)1.22 (31.0)1.22 (31.0)1.00 (25.4)4.40 (111.8)3.47 (88.1)3.47 (88.1)2.10 (53.3)2.09 (53.1)1.36 (34.5)1.36 (34.5)

B

0.53 (13.5)0.60 (15.2)0.68 (17.3)0.60 (15.2)0.68 (17.3)0.60 (15.2)0.55 (14.0)0.60 (15.2)0.50 (12.7)0.60 (15.2)0.70 (17.8)0.70 (17.8)0.70 (17.8)0.70 (17.8)0.60 (15.2)0.66 (16.8)

C

0.38 (9.7)0.38 (9.7)0.38 (9.7)0.38 (9.7)0.38 (9.7)0.38 (9.7)0.38 (9.7)0.38 (9.7)0.38 (9.7)0.38 (9.7)0.38 (9.7)

0.50 (12.7)0.38 (9.7)

0.50 (12.7)0.38 (9.7)0.38 (9.7)

D

2.60 (66.0)2.60 (66.0)2.00 (50.8)2.00 (50.8)0.88 (22.4)1.00 (25.4)0.38 (9.7)0.38 (9.7)

N/A3.40 (86.4)2.00 (50.8)2.00 (50.8)1.00 (25.4)1.00 (25.4)0.50 (12.7)0.50 (12.7)

Insertion Loss(dB Max)

VSWR (Max)

E

N/AN/AN/AN/AN/AN/AN/AN/A

0.50 (12.7)N/AN/AN/AN/AN/AN/AN/A

F

0.22 (5.6)0.22 (5.6)0.34 (8.6)0.22 (5.6)0.34 (8.6)0.22 (5.6)0.22 (5.6)0.22 (5.6)0.22 (5.6)0.24 (6.1)0.26 (6.6)0.26 (6.6)0.26 (6.6)0.26 (6.6)0.26 (6.6)0.26 (6.6)

G

0.07 (1.8)0.07 (1.8)0.15 (3.8)0.07 (1.8)0.15 (3.8)0.07 (1.8)0.07 (1.8)0.07 (1.8)0.07 (1.8)0.07 (1.8)0.10 (2.5)0.10 (2.5)0.10 (2.5)0.10 (2.5)0.09 (2.3)0.09 (2.3)

H

0.12 (3.0)0.12 (3.0)0.15 (3.8)0.12 (3.0)0.15 (3.8)0.12 (3.0)0.12 (3.0)0.12 (3.0)0.12 (3.0)0.12 (3.0)0.12 (3.0)0.12 (3.0)0.12 (3.0)0.12 (3.0)0.12 (3.0)0.12 (3.0)

I

N/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/A(3)N/A(3)N/AN/A

J

N/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/A

0.34 (8.6)N/A

0.34 (8.6)N/AN/A



Section 5Passive Components

29

DIRECTIONAL COUPLERS - HIGH POWER

● 0.5 - 12.0 GHz● 600W C.W.● 10kW Peak● RF Shielded● Robust Construction

0.60(15.24)

B

A

0.156(3.96) ± .003(.08) DIA.

SMA STAINLESS STEELFEMALE CONNECTOR

0.15(3.81)

0.74(18.8)

0.60(15.24)

0.60(15.24)

0.65 (16.51)MAX

1.10(27.94)

0.50(12.7)

0.80(20.32)

0.40(10.16)

TYPE N FEMALECONNECTOR

General SpecificationsDesign: Stripline

Circuit: PTFE Based

Housing: Aluminium

Connectors: SMA & N to MIL-C-39012

Temperature: -55 +85C

Finish: Grey Paint



Custom frequency ranges, specifications and configurations are also available.We reserve the right to change standard product specifications without notice but will bepleased to consider control drawings for quotation.

(1) Includes frequency sensitivity(2) Coupling C to be selected in range 30 to 50dB


Model

No.

Freq.

Range

(GHz)

Coupling

(1)

(dB)

Freq.

Sensitivity

(dB)

Fig.

A2323 - C (2)

A2303 - C (2)

A3333 - C (2)

A2336 - 35 (2)

A3334 - C (2)

A2304 - C (2)

A3345 - C (2)

A2345 - C (2)

A2305 - C (2)

A2356 - C (2)

A2306 - C (2)

A3356 - C (2)

0.5 - 2

1 - 2

1 - 4

1 - 11

1.5 - 4.5

2 - 4

2 - 8

2.6 - 5.2

4 - 8

5 - 11

7 - 11

4 - 12

C ± 1.0 (2)

C ± 1.0 (2)

C ± 1.0 (2)

35 ± 1.5 (2)

C ± 1.0 (2)

C ± 1.0 (2)

C ± 1.0 (2)

C ± 1.0 (2)

C ± 1.0 (2)

C ± 1.0 (2)

C ± 1.0 (2)

C ± 1.0 (2)

± 0.75

± 0.75

± 0.60

± 1.50

± 0.60

± 0.75

± 0.60

± 0.75

± 0.75

± 0.50

± 0.50

± 0.60

18

18

15

15

18

18

16

18

18

15

15

15

0.2

0.2

0.2

0.2

0.2

0.2

0.2

0.2

0.2

0.2

0.2

0.2

1.15

1.15

1.20

1.30

1.20

1.20

1.30

1.20

1.30

1.30

1.30

1.30

6

4

5

5

4

2

3

2

1

1

1

2

Directivity

(dB Min)

FIG.

1

2

3

4

5

6

A

2.00 (50.8)

2.50 (63.5)

3.00 (76.2)

3.50 (88.9)

3.85 (97.8)

6.00 (152.4)

B

0.80 (20.3)

1.30 (33.0)

1.80 (45.7)

2.30 (58.4)

2.65 (67.3)

4.80 (121.9)

Insertion Loss

(dB Max)

VSWR (Max)

Primary

Line




90° HYBRID 3dB COUPLERS

● 0.5 - 18.0 GHz● Miniature Size● High Isolation● Low VSWR● RF Shielded

D

B

C

A

0.105(2.66) ± .003(.08) DIA.

SMA ST

equipment and components for the rf & microwave industry16350 16350 16350 16850 17150 40a springwood...

Documents