SPEC. 327

Equipment Capabilities

APPLICATIONS

MILLING MACHINE CONTROL SYSTEMS

LAYOUT FOR SUPER-ELEVATED CURVES

PAVER CONTROLS

POTENTIAL PROBLEMS

USING MILL TO REMOVE AND PULVERIZE EXISTING SHOULDER

View of the Drum and Teeth

USING THE MILL TO ACHIEVE A SMOOTH RIDE IN URBAN AREAS

PROFILING ROADWAY 1 OVERLAY

WATER MAIN INSTALLED, BLACK BASE PLACED WAS NOT UNIFORM. MILL PROFILED ROADWAY USING EXISTING CURB AND LANELINE. DO YOU THINK THE CROSS-SLOPE WAS CHANGED?

5

A1A @ DUNLAWTON AVE

THIS WAS A DEPTH CUT, NO CROSS-SLOPE USED

6

CONTROL SYSTEMS

SLOPE CONTROL

ENDGATES AND THE YO-YO SWITCH

SONIC GROUND SENSOR

SINIC SKI

YO-YO SWITCH ATTACHED TO THE ENDGATE

SENSOR SETTING FOR DEPTH

MILLING CROSS-SLOPE

CROSS-SLOPE MILLING

CROSS-SLOPE REACTING TO SLOPE CHANGE

HOW THE MILLING OPERATOR CUTS A SUPERELEVATED CURVE

Milling around curves, manholes and multiple passes

PROBLEMS THAT CAN OCCUR

ENDGATE/ SENSOR RUNS OFF UNEVEN SURFACE

DAYLIGHT MILL DUE TO VARYING CROSS-SLOPE

MILL INTO LIMEROCK BASE

DROP-OFF BETWEEN ADJACENT TRAFFIC LANES

EXISTING SHOULDER DOESNT MATCH NEW FINISH GRADE

USING WRONG STATION FOR START OF SUPERELEVATION

PAVING CONTROLS

THE CONTROL SYSTEM OPERATES A HYDRAULIC CYLINDER THAT CHANGES THE ANGLE OF ATTACK OF THE SCREED

A PAIR OF SCREWS ARE ALSO USED TO MANUALLY ADJUST THE THICKNESS OF THE PAVING

PAVER SLOPE CONTROL

SONIC SLOPE CONTROL

SKI POLE FOR PAVER

RIGID STRAIGHTEDGE