AGRICULTURAL www.durrants.com

01502 470427 Follow us on @DurrantsAgri

Catalogue

Dispersal Sale of Engineering Tools,

Equipment, Timber and Consumables

To be offered for sale by Timed Online Auction via i-bidder.com

Bidding Opens Wednesday 20th March 2019 and Closes from 12pm Wednesday 27th March 2019

Viewing: Monday 18th March 9am to 11am

and Friday 22nd March 3.30pm to 5.30pm

V3 22.3.19

AUCTIONEERS’ REMARKS AND SPECIAL NOTICES

1. We are instructed by Mr & Mrs Jolliffe to conduct an online sale of engineering tools, equipment, timber and consumables.

2. VAT – VAT is not payable on any of the lots unless otherwise stated. 3. Buyer Registration - All registrations for this auction are provisional and subject to the approval of the

auctioneer. If your registration has not been approved, please telephone 01379 646602/01502 470427 on the morning that the sale closes.

4. Internet Bidding – Bidding opens on 20

th March and closes on 27

th March from 12pm (Midday). Please

check the individual closing time for each lot. After each bid is placed from 12pm (midday), bidding will remain open for a further 10 minutes. In order to find check the latest amount bid for a lot, press F5 and refresh your screen.

If, at the time of placing your highest bid the reserve has not been met, it may be treated as a valid bid and the Lot may be knocked down to you once the sale has closed. All details are provided in good faith. They should not be relied upon as fact and buyers must make their own investigations where measurements, mileages, hours, condition or authenticity are critical. Buyers should make themselves satisfied they are happy with the lot before they bid as viewing is available on all lots by prior appointment, all bids are non-retractable. Potential purchasers who do not inspect lots prior to bidding, do so at their own risk. All items are subject to a 3% plus VAT i-bidder charge.

5. Buyers Premium – Buyer’s premium is charged on all lots at the following rates: 10% + VAT charged by Durrants 3% + VAT charged by i-bidder.com*, which will be added on to your invoice after the sale. 6. Payment – All payments must be made in £’s sterling.

All items purchased must be paid upon receipt of the invoice sent by the auctioneers and within 5 working days of the auction date.

We will only accept the following payment methods: 1. Debit card (subject to the Terms & Conditions of sale) 2. Personal cheque (clearance of the cheque or bank guarantee required before goods leave, see below) 3. Bank/building society guaranteed cheque or draft 5. Bank to bank transfer 6. Cash payment up to £7500.

In order to comply with the Money Laundering Regulations 2003, we are unable to accept cash payments for the sums in excess of £8,500. This includes single payments amounting to this sum or multiple payments totalling £8,500. We are also unable to accept any cash payments paid directly into our bank account.

7. Viewing – Monday 18

th March 9am to 11am and Friday 22

nd March 3.30pm to 5.30pm

8. Removal of Goods - All purchased lots should be collected on 4

th or 5

th April by appoiintment. Please

telephone Scott Parke on 01502 470427 or 01379 646602 to arrange collection. Removal of lots is subject to clearance of cheques, bank transfers and so forth. Any items left after this date will either be disposed of or offered for sale in a subsequent auction without reserve.

9. Loading – A loader will be available by separate arrangement and cost with a Mr Kerry on 01508 480354. 10. Sale Telephone Numbers - 07467 959591/01379 646602 (Scott Parke) or 01502 470427 (Nicholas

Rudge) 11. Catalogue Entries – Whilst every attempt is made to ensure that the descriptions are accurate, no

guarantees are either given or implied. Buyers should be aware that from time to time, lots are withdrawn and other lots added. Please contact the auctioneers prior to the sale to ensure that the machinery has been delivered onto the sale ground.

V3 22.3.19

CONDITIONS OF SALE 1. Bidding - The highest approved bidder shall be the purchaser. No bidding to be retracted. Each

purchaser shall give up his (or her) name and address when asked for. Should any dispute arise between two or more bidders, the lot in dispute shall be put up again and resold; and the Auctioneers reserve to themselves the right of refusing any person's bid, and shall be the sole Arbitrators on any matter in dispute during the sale. The vendor also reserves the right to bid by his agent.

2. Description - No warranty is given or implied by the description in the catalogue. Each lot is sold

in its condition at the time of sale with all faults, defects, imperfections and errors of description (if any). Whilst every endeavour has been made to describe the items adequately and properly, the purchaser shall deem to have inspected the lot at time of purchase.

3. Variation of Lots - Auctioneers reserve the right to withdraw, consolidate or divide any lot or lots

or submit them in any order that they deem desirable. 4. Payment - All lots shall be paid for upon receipt of the invoice sent by the auctioneers and within 5

working days of the auction date. The Auctioneers reserve the right to refuse delivery when payment is proposed by cheque and the purchaser are unknown to them. To avoid such inconvenience payment should be made by cash, bankers draft or debit card (in person only) and any alternative form of payment (by those unknown to the Auctioneers) must be arranged with the Auctioneers prior to the Sale. After the fall of the hammer, the lot shall be at the purchaser’s risk. It is expressly stated that the Auctioneers will not be responsible for its safe custody. Due to Money Laundering Regulations 2007, the Auctioneers cannot accept cash payments in excess of £8,500 (inc. VAT) from any one person. All money received will be held in George Durrant & Sons Ltd (Durrants) Clients Account at Barclays Bank plc.

5. Non Payment - If the purchaser defaults with his payment the Auctioneer shall be at liberty to

recover by process of law, against the purchaser the cost of any lot or lots brought by him, without reference to the purchaser, dispose of such lots as the Auctioneer sees fit. If there is a surplus on resale the Auctioneer shall have the right to appropriate the same, or if a deficiency, to recover from the purchaser such deficiency.

6. Heath and Safety - Purchasers will be deemed to have satisfied themselves prior to purchasing

regarding current legal requirements (e.g Health & Safety at Work Act) and it is expressly brought to the bidders attention that equipment in the sale may not necessarily comply with such regulations. Any purchaser shall satisfy himself as to any statutory requirement for the use of any item and no liability shall rest with the vendors nor the Auctioneers.

All electrical items require a current Electrician’s Safety Certificate and any item delivered without

a Certificate will either be refused entry or have the lead and plug removed and sold as scrap. Where electrical equipment is sold without specific instructions for use it is the responsibility of the Purchaser to take independent advice as to the correct operating procedures and any characteristics specific to them. The Auctioneers and Vendor shall have no responsibility for the safe use of the item.

7. Personal Safety - Neither the vendors nor the Auctioneers will be held responsible for any injury,

damage or accident caused to persons or their property whilst at the property. This is private property and persons enter the premises at their own risk.

8. Purchasers shall pay for any damage done by themselves or their agents during the removal of

their lots.

V3 22.3.19

Lot Description 1 3 Petrol Fuel Cans 2 2 x Classic Oil Cans 3 2 x Plastic Dog Beds-1 large, 1 small 4 Collection of Rope with Ratchet Strap and Ratchet 5 2 x Reels of Chicken Wire mesh netting 6 Spare lot 7 Spare lot 8 Spare lot 8A 3 x hose reels 9 Spare lot 10 240 Volt Electric Hacksaw (Plug removed) 11 2 x Mahogany topped trading tables, ex Norwich Corn Hall (both

1.5m wide) 12 Box of Various car cleaning and chemicals-Car Wax, De-icer, Turtle

Wax, T-Cut, Lighter Fluid 13 Spare lot 14 Numerous Boxes of Plastic wall plugs, masonry anchors, cap

screws, socket head cap screws of various sizes, shoulder screws approx. 130 boxes

15 Ring Automotive-Air compressor/tyre inflator

16 5 x extension leads of various lengths PAT Test 2 x PASSED (14/03/19) 3 x FAILED (Damaged plug top and flex) 17 Clarke 12V Rechargeable JumpStart 900 Battery Pack – PAT Test –

PASSED (14/03/19) 18 2 Tilley Storm light paraffin lantern 19 Metal Framed bench with wooden top (1.4m wide 0.9m deep) 20 Metal Shelving unit with drawers and 5 x shelves (0.9m wide 0.4m

deep) 21 Wolf Dual wheeled grinder on pedestal stand – PAT Test – FAILED

(Damaged plug top) 22 4 x Wooden Crates 23 Spare lot 24 Metal shelving unit-4 x shelves on metal stand 25 Spare lot 26 Wild Barfield Furnace with 2 x Quenching baths-1000 degree Celsius

240volts, single phase, 3.6kW, Model-M254 Equip No. AE4932O 27 69 Litre Plastic Tub-good condition 28 1 x Metal bin and 2 x plastic bins 29 6 x plastic buckets and 2 x metal buckets 30 Spare lot 31 2 x metal sieves 32 7 x long handled brooms 33 2 x plastic rakes with wooden handles 1 x metal rake 34 5 x long handles hoes

V3 22.3.19

35 6 x short handled shovels 36 3 x wooden handled forks-4 x shovels-1 x hoe fork 37 Box of short handled scythe, shears, edging shears 38 Arboga drilling pedestal drill-2508 2512 Type G 2509, 3 phase, No

273315 415Volts and wooden rack with various sleeves etc. for pillar drill

39 3 x vices and metal wall rack 40 – 41 Spare lots 42 Wooden bench with 2 x drawers and bottom shelf 43 – 45 Spare lots 46 Draining rods and brushes 47 Double Metal shelving unit on wheeled trolley 48 Spare lots 49 2 x small metal drawers 49A Small set of 16 drawers with various taps, cap screws, nuts and

bolts, washers, etc 50 Small box of thread seal tape, gaffer tape, brush cleaner, masking

tape, insulating tape etc and Aluminium Putty 51 4 x metal rulers 52 Box of stocks and dies 53 Sledge Hammer and Log splitting maul 54 Drills s/shank L/S metric-6 x sets of various drill bits, core cuts etc 55 Box-mechanical drain unblocker tool, file, screwdrivers, wire

brushes, chisels, goggles, metal rulers, stapler etc. small hammers, large wood hand plane

56 Box of files, spanners, grips, wraparound goggles, clamps, clip on lamp, chrome clad leather tape measure, torx key set, numerous magnifying glasses, rubber mallet

57 Box of trowels, files etc 58 Box of coping saw blades, files pliers, wire brushes, grips, screw

drivers, crowbar, etc 59 Surface plates, 5 x small, 2 x large, iron surface plates (by pedestal

drill) 60 2 x Boxes of Reamer bits, various sizes 61 2 x boxes Box of drill bits 62 Mercedes Badge front emblem for car 63 Presta super shock absorber vintage stop watch 64 Record metal vice 65 Box of FAG 110-6533 110-6618 Ball Bearings 66 Eiko 3 phase Circular Saw 67 Makita 180mm Disc Angle Grinder (Model 9607B) - PAT Test –

FAILED (Damaged plug top and flex) 68 Wolf hand drill (Type 3676) – PAT Test – FAILED (Damaged plug

top) 69 Wolf Hand Drill – PAT Test – FAILED (Insulation low) 70 Bosch Orbital Sander PSS 230 – PAT Test – PASSED (14/03/19)

V3 22.3.19

71 Duplex N30 Nibbler – PAT Test – FAILED (Damaged plug top) 72 Bosch GOF Router 1700E 73 Box of Hex Keys/Allen Keys small and Large 74 Boxes of grinder attachments including deburring and finishing

wheels, polishing wheels, buffing mops 75 Magnifying Glass on stand and Lamp 76 Spare lot 77 5 x engineer's/tool maker's trays with rubber inserts 78 Approx. 4 grease guns, 2 x metal trays and metal tool tray 79 2 x oil can pourers and 1 x funnel 80 Chain Pull Winch 81 Chain oil filter wrench 82 Box of assorted tools, 4 x hammers, metal rulers, wooden spirit level,

hack saw, files, grips, hand wood planer, vintage manual hand drill, drill bits, chisels

83 Box of wood polish and oils, sand paper, adhesives and a crate of white spirit and wood dye

84 Box of assorted wood screws 84A 4 x boxes of various drill bits, straight shank, centre drills high speed

steel drill bits, Osborn drill bits, carious sizes starting 1.55mm to large

85 Spare lot 86 13 rectangular canisters of oil, 9 x large tubs of oil and 1 x diesel.

(Gear oil-Shell Voluta Oil), 8 x Tubs of assorted oil and lubricants (10W-50, 5W-40) 4 Stroke engine oil, paraffin, Tub of Triclean S B x 2170 (diluted 3 x), Blaser swisslube blasocut 2000 universal cutting fluid

87 – 90 Spare lots 91 Addison Circular Saw – PAT Test – FAILED (Damaged plug top) 92 Approx. 114 Assorted sizes of milling machine cutters (all in good

condition) 93 2 x circular cast iron pig troughs 94 Startrite 18-T-10 Vertical Band Saw-9 Amp 220V, No.160328 and

numerous spare blades 95 Wooden folding end table 96 Spare lot 97 Parts from Horse Drawn Cart/Carriage and Harness and Antique Iron

Hay Rack 98 Wooden Ammunition Box 99 Small Wooden Barrel 100 Wire Mesh and Stakes 101 Metal Watering Can 102 2 x Antique well buckets (recently galvanised), iron cauldron and a

steel bucket. 103 Hand Syphon Pump 104 Large Metal Pulley

V3 22.3.19

105 Antique fire dogs and screen frame 106 Vintage Hay Knife 107 Antique seed drill 108 Assorted Vintage Garden tools rural bygones-Spades, Scythes,

rakes, wooden handled scoops 109 Numerous Assorted Sizes Terracotta Garden Pots 110 Numerous Assorted Metal Bins and feeders for scrap 111 Burco Electric Water Boiler – PAT Test – FAILED (Damaged plug

top and flex) 112 Norton No. 8 Deep Throat Fly Press 113 Metal Shelving Cabinet with Assorted tools for Fly press 114 Numerous Plastic Sheets 115 Clarke PW2 Pump 6.5hp 4 stroke Engine with hose and reel 116 Approx. 12 Metal Trestles and one single roller on stand and 2 x

metal steps 117 Large Plastic Tub 118 Max Arc Welder and 3 x Welding Masks 119 Bespoke Iroko strip built dingy/ yacht tender with British Seagull

outboard motor included 120 Gallon bucket of 1 inch galvanised nails 121 Knapsack Sprayer and pump action sprayer/paint sprayer 122 The Viking antique platform scales 123 2 x Metal Tubs 124 2 x boxes of assorted nails, screws, galvanised staples, masonry

nails, round head nails 150 x 6mm 125 Honda HRB535 Petrol Lawnmower and box 126 Honda UM536 Self-propelled, Wheeled grass strimmer-2007-KZAG 127 Black and Decker Electric Strimmer 128 Allen SDS20 Petrol Brush cutter with Kawasaki TD18 Engine 129 Spare lot 130 Scott's Evergreen lawn spreader 131 Coopers Leaf/Lawn sweeper 132 Clarke Log Buster 5-Electric log splitter – PAT Test – FAILED

(Damaged plug top) 133 Metal Sack Barrow 134 Plastic Wheel Barrow with single metal handle 135 5ft/6ft 3 x wooden folding ladders 136 2 x wooden ladders approx. 10ft 137 1 x metal folding ladder approx. 10 ft. 137A 1 x metal folding ladder approx. 6 ft v good condition 138 1 x metal ladder approx. 12ft-15ft 139 Lescka Super Zak Junior Garden Shredder 140 Cramer Garden Cut Wood Chipper with Honda GX270 9.0 Engine 141 BVC Vacuum Cleaner – PAT Test – FAILED (Damaged plus top) 142 Metal Shelving with assorted nuts and bolts 143 2 x tubs of assorted nuts and bolts

V3 22.3.19

144 Precision built tractor with Petter Engine, hydrostatic drive wheels and tow bar, and two spare hydrostatic motors-Dimensions; Overall Length-2m, Width at rear wheels-0.91m, Max height to top of steering wheel-1.14m

145 Metal Shelving and Racking 146 Assorted Wheels and tyres for wheel barrows, trailers etc. approx. 12 147 2 x hedgecutters 1 with Kawasaki Engine-1 is electric – PAT Test –

FAILED (Damaged plug top) 148 Husqvarna 460 Rancher Chainsaw with spare chains (Nearly New) 149 Spares and repairs-part of Hedge cutter, blade and handle 150 Assortment of threaded rods (some stainless steel) and metal

racking/shelving 151 Wooden Bench on metal frame and G Clamps 151A Bronze bushes (bearings) 151B 2 Bottle Jacks 152 2 x boxes of assorted springs 153 Spare lot 154 Metal Frame and metal top bench 155 Wooden Bench with Metal Vice 156 Spare lot 157 Ceramic sink basin and pedestal 158 Assorted MDPE Blue water pipe 159 Approx. 5 x Scaffold Planks (14ft), assorted timber and creosote

treated fence posts 160 – 161 Spare lots 162 H G Sommerfield Ltd (Serial No. 46073) 3 phase Industrial

Sandblaster and Metal Shelving unit with metal cleaning equipment and tumbler components

163 Spare lot 164 Large Wooden Carpenters Bench and Vice 165 Precision engineered wood turning lathe bespoke with a unique

range of precision made chucks and tools. Powered from an ordinary 13Amp socket. Dimensions: From centre of Chuck to Drill- Max 128cm, Centre of Chuck to bed of Lathe- 31cm, From Bed to floor- 86cm, Overall length-246cm – PAT Test – PASSED (14/03/19)

166 – 167 Spare lots 168 Slate Fish Tank 169 2 x wooden cupboards 170 Large quantity of Norfolk soft red bricks, large capstones, pantiles,

ridge tiles, etc 171 Galvanised tank 172 Good Collection of large Hostas and other plants in pots 173 Large Antique Ceramic Sink Garden and plants 174 Approx. 40 Reels of electric cable 175 3 x boxes of socket cases, metal casing for electric cables,

connectors and collars

V3 22.3.19

176 Quantity of electrical trunking offcuts 177 4 x lengths of metal square electrical trunking offcuts 178 4 x boxes of 40W, 60W and various Cryselco Lamp bulbs and 2

miniature fluorescent tubes 179 2 x boxes of cartridge fuses (1,2,3,5,10 and 13 Amp) 180 Quantity of cartridge fuse links, 16A, 20A, 30A, 60A 181 Quantity of plugs, light fittings and electric cabling 182 Quantity of metal electric box fittings/connection junction boxes 183 3 x Switch units and Sanders Wednesbury fuse board 184 Box of switches, boxes of various Crabtree components including. -T

Range 1-Unit enclosure, T-6 contactor pump, T-6 overload Relays and a box of old spotlight fittings with bulbs.

185 Box of cable ties, strip binding and a box of cable clamps, screwed lock rings and grommets, etc

186 5 x boxes of various electric fittings, plastic clips, fixing clips, various spares, wiring products etc

187 3 x Boxes of Patay 1984/1985 hand pump parts-like new 189 2 x Rubbolite Marker Lamps 190 Plastic lever action barrel hand pump 191 Asea MT71A14-2 Motor 192 A.C. Brooks Gryphon Motor 193 EOF Motor 194 Brooks BS 2048 Gryphon Motor 195 Brooks BS170 Gryphon Motor 196 Another Motor 197 Matsushita Electric FP-200K Motor and approx. 4 small Motors 198 Honda UM21 Petrol engine 199 2 x Large motors-unknown if working 200 Box of Pneumatic fittings, metric and nylon tubing, tube nuts, tees,

sleeves and valves 201 Box of Poly bags 202 Box of self-lubricating bearings 203 Angle Drives (90 degree drive shafts and bevel gears) 204 Antique wooden hand planer 205 2 x boxes of various bearings, speed shaft and metal box of bearings 206 Box snap head rivets 207 Spare combine knife blades 208 Bag of washers 209 Sack of metal hinges 210 Bag of expanding adaptors and bolts 211 2 x large rolls of Polypropylene strapping, Plastic Strapping heavy

duty cutter and tensioner and a box of clips and 2 x boxes clear polythene bags

212 Assorted V Belt drives, rack and splines etc 213 Large lead screws and blocks 214 Bearings Spline and Sprocket etc, bearing and central mount

V3 22.3.19

215 2 x Boxes of Closures, Grommets, Neoprene rubber rings etc 216 Box of Seal Washers 217 Box of moulded grips and metal knobs and handles and plastic

knobs 218 Quantity of rubber matting, blue pneumatic airline tubing and blue

and white nylon tubing 219 Quantity of Plastic and rubber small trolley wheels 220 Boxes of Taper lock Bushes 221 Quantity of rubber belts 222 Hellermann electric fittings 223 Bailcast Stretch Drive Shaft Boot Kit and box of rubber mouldings 224 Box of small tractor spares and spare main drive 225 Bag of Router Shrouds and drive ra tchets 226 Box of various nuts and bolts 227 5 x Boxes of various BSP fittings, galvanised and plastic 228 Box of assorted taps and 2 x ball cock and float valves 229 Lathe/milling machine chuck spanners 230 Large quantity of metal dowel pins 231 Assorted button head screws, pressed nut slot screws etc 232 Approx. 50 boxes of Cap screws 233 Large quantity of boxes of socket screws 234 Quantity of hose with metal connectors 235 4 x hand brushes-new and 1 x Broom brush 236 13 x McGill GY2 CAMYOKE bearings 237 Assorted pipe and hoses 238 1 x extension lead reel 239 Numerous boxes of assorted paintbrushes 240 Boxes of abrasive discs and sandpaper 241 2 wheels and tyres 242 Various Rolls of parcel tape, electric tape, PTFE thread seal 243 Approx. 123 small abrasive surface grinder wheels 244 Quantity of assorted grinding wheels/ discs inc aluminium oxide and

10” diameter surface grinding wheel 245 2 x large grinding discs 246 Quantity of foam wrap cellaire 247 2 boxes of PermaBond adhesive retainer A118 50m 248 Box of Captan sleeves and Box of shaft collars 249 2 x wheels 250 Approx. 16. Boxes of Arc-welding rods, including Electrode

Supercord Rods etc 251 Brass boat hook 252 Cherry Dimplex fan heater 253 Press Die Set components-Various 254 3 x cast iron Tudor-rose door knockers 255 Mixed Lot of Lathe centring points 256 Quantity of boxes of taps and BSP taps

V3 22.3.19

257 Lathe cutter mounts (for tungsten cutter points) 258 4 x Metal Framed Shelving Units with Wooden Shelves 259 1 x Large Metal Framed Shelving Unit with Wooden Shelving 260 Drive shaft/roller (assumed stainless steel) 261 RSJ girder 262 3 x 8' x 4' compressed plastic sheets 263 Large Quantity of plastic discs 264 Workshop Bench 265 Metal wall mounted racking 266 Various lengths of timber, Rowan, Sycamore, Broom, Hawthorn etc 267 3 small heaps of sawn timber, Cherry and other, various lengths up

to 10' 2” 268 3 lengths of cut Cherry 8' 8” long 269 3 assorted heaps of timber including pieces approximately 10' long 270 2 heaps of timber including 4 large sawn Elm lengths 8' 2”. 271 2 heaps of assorted plain and rough cut timber 272 6 cut lengths of Cedar and Lebanon, approximately 8' 2” and 5

assorted pieces 273 1 block Corsican pine 39.5” x 7.5” x 6”. 274 3 small heaps of assorted cut timbers, Elm and Cherry 275 10 small heaps of miscellaneous timber of assorted lengths including

Lilac, Maple, Rowan, Hornbeam, Bullace, Willow etc 276 1 small heap of assorted timber, including Larch 277 7 small heaps of rough cut wood, assorted lengths including Cherry,

Elm, Hazel, Suma, Lilac, Hornbeam, Elder, Yew, Laburnum etc 278 Quantity of sawn and planed timber 279 Quantity of sawn and planed timber 280 Quantity of sawn and planed timber 281 3 cut lengths each GPO poles 7' x 9” x 4” 282 4 small heaps of cut and planed timber 283 3 small heaps of cut and planed timber 284 2 small heaps of cut and planed timber 285 4 small heaps of cut and planed timber 286 Heap of cut firewood, overall approx. 6.77 cubic metres 287 4 crates of kindling, approx. 0.76 of a cubic metre plus small cut

firewood. 288 Assorted lengths of cut and planed timber including horizontal

racking 289 Assorted lengths of cut and planed timber including vertical racking 290 3 assorted heaps of timber on floor 291 4 heaps of fire wood plus 1 part heap. Approximately 33.4 cubic

metre of firewood. 292 A pen of mixed firewood, approximately 6.95m

2

293 A stable of firewood, approximately 8.57 cubic metres together with firewood in part adjoining stable

294 3 Lengths of timber

V3 22.3.19

Residential Commercial Agricultural

Building Consultancy Estate Management

Holiday Lettings Outside Auctions Auction Rooms

www.durrants.com Offices in Beccles, Diss, Harleston, Halesworth, Southwold and

Mayfair Office, London Auction Rooms at Beccles

Follow us on Find us on