esme-- 2010
TRANSCRIPT
-
8/8/2019 ESME-- 2010
1/192
EntrepreneurshipandSmall Medium
Enterprises
-
8/8/2019 ESME-- 2010
2/192
Unit : I1.D efinition,2.Nature and Importance of an Entrepreneur,3.Ty pes of Entrepreneur
4.Qualities & Characteristics of an Entrepreneur 5.Intrapreneurship6.Entrepreneurial Process .
-
8/8/2019 ESME-- 2010
3/192
Introduction:
An Entrepreneur is the person who isresponsible for -- setting up a business or enterprise .
-- takes initiative-- innovative-- and looks for high achievements .
-
8/8/2019 ESME-- 2010
4/192
Definition of an Entrepreneur:The word derived from the French wordenterprendre means to undertake .
According to J .A Schumpeter:Entrepreneur is an innovator who carries outnew combinations to initiate the process of economic development through introduction of new products, new markets, take over of newsource of raw materials and establishment of anew organization of industr y.
-
8/8/2019 ESME-- 2010
5/192
According to Webster: Entrepreneur is one who assumesthe responsibilit y of the risk and management of
business .
According to Peter Drucker:
Entrepreneur is one who alwa ys searches for change,responds to it and exploits as an opportunit y. Innovationis a specific tool of entrepreneurs, the means b y whichthey exploit change as an opportunit y for different
business or service .
According to Dewing: The function of entrepreneur isone that promotes ideas into business .
-
8/8/2019 ESME-- 2010
6/192
Nature and Importance of an Entrepreneur:1.Contributes for the economic development .
2.Speed up the process of activating the factors of production .
3.Creation of emplo yment opportunities .
4.Development of backward and Tribal areas .
5.Improvement in the standard of living of the
weaker sections of the societ y.
-
8/8/2019 ESME-- 2010
7/192
Ty pes of Entrepreneur:1. Trading Entrepreneurs
a.R eal Estate, b.Mall Trading .
2. Industrial Entrepreneurs:a. Large, b .Medium and c . Tiny Sector .
3.Corporate Entrepreneurs .
-
8/8/2019 ESME-- 2010
8/192
4.Agricultural Entrepreneursa.Plantation
b.Horticulturec.Poultr y [Poultr y feed, poultr y equipment, and
poultr y processing sectors]
5.Service Entrepreneursa.Engineering
b.Beaut y Parlours .
6.Health Entrepreneurs .
-
8/8/2019 ESME-- 2010
9/192
Classifications of Entrepreneurs1.Innovating Entrepreneurs
2.Imitative Entrepreneurs
3.Fabian Entrepreneurs [lack the will to adopt tonew methods of production]
4.Drone Entrepreneurs [the y are not read y to makechanges in their existing production methods . They struggle to exist, not to grow ,continue tooperate in a traditional wa y and resist changes .
-
8/8/2019 ESME-- 2010
10/192
Qual ities a nd Ch arac te r isti cs of a nEnt r ep r ene ur.
According to James J .Berne
1.H e is an enterprising individual, energetic, hardworking, resourceful, aware of new opportunities,able to adjust himself with changing conditionswith ease and willing to assume risks involved in
change .2.He is interested in advancing technolog y and in
improving the qualit y of his product or service .
-
8/8/2019 ESME-- 2010
11/192
3.He is interested in expanding the scale of hisoperations b y reinvesting his earnings .
4.He visualizes changes and adopt
5.He is a firm believer in planning and s ystematicwork .
6.He works for the societ y at large .
-
8/8/2019 ESME-- 2010
12/192
Characteristics of an Entrepreneur .Technical competence, initiative, good judgment,intelligence, leadership qualities, self-confidence, energ y, attitude, creativeness,fairness, honest y, tactfulness and emotionalstabilit y.
1.Mental abilit y
2.Clear Objectives
3.Business Secrec y
-
8/8/2019 ESME-- 2010
13/192
4.Human relations abilit y
5.Communication abilit y
6.Technical knowledge
-
8/8/2019 ESME-- 2010
14/192
Entrepreneurial Behaviours
1.G rasping opportunit y
2. Solving problems creativel y
3.Take responsibilit y
4.Networking effectivel y to manageinterdependence .
-
8/8/2019 ESME-- 2010
15/192
Entrepreneurial Attributes:
1.Achievement orientation and ambition
2.Creativit y, determination
3.Preference for learning b y doing
-
8/8/2019 ESME-- 2010
16/192
Entrepreneurial skillsEntrepreneurial skills
1.Strategic thinking
2.Negotiating
3.Networking
4.Creative problem solving
-
8/8/2019 ESME-- 2010
17/192
Intrapreneurship:Intrepreneurship or intrapreneuring or corporateentrepreneurship is the process b y which other new ventures are born with in an existingcorporation .
It involves-- expansion b y exploring new opportunities
-- through new combinations of existing resources .
-
8/8/2019 ESME-- 2010
18/192
Entrepreneur Intrapreneur
Independent Semi- independent person
R aises the necessar y Neither raises capital nor Capital b y himself and guarantees the investors .Guarantees the return to theinvestors .
Takes full risks Does not full y bear therisks .
Operates from outside operating with in the orgns .
-
8/8/2019 ESME-- 2010
19/192
Examples for Intrapreneurship:1) 3M: Minnesota Mining and Manufacturing
a) Allows emplo yees to devote a percentage of their time to independent projects .
2) HP: They failed to recognize the Steve Wozniaks proposal for the personal computer . But PC is the base for the Apple Computers .
David Packard and Charles House[engineer invented the high qualit y video monitor . It wasused b y NASA also the heart transplants .
-
8/8/2019 ESME-- 2010
20/192
3.IBM-- separate organizations/ board of directors/autonomous decision making authorit y.
-- products like Automatic Teller Machine for Banks, Industrial robots, and the I BM PersonalComputer .Intrapreneur Philip Estridge .
-
8/8/2019 ESME-- 2010
21/192
Intrapreneurial Environment:1.Organization operates on frontiers of technolog y2.New ideas encouraged3.Trail and error encouraged
4.Failures allowed5.R esources available and accessible6.Multidiscipline teamwork approach
7.Long time horizon8.Appropriate reward s ystem9.Sponsors and support of Top management
-
8/8/2019 ESME-- 2010
22/192
Entrepreneurial ProcessStage I : Change in the economic environment,
creates needs for new goods and services .
Stage II: By starting a new venture .
Stage III: Intrapreneurship
Stage IV: Co-ordinating the varied activities toachieve the entrepreneurial goal .
-
8/8/2019 ESME-- 2010
23/192
U nit: II1.Concept of Entrepreneurship
2. Phases of Entrepreneurship Development
3. Factors Influencing Entrepreneurship .
-
8/8/2019 ESME-- 2010
24/192
I. Concept of Entrepreneurship:
Acc to McClelland;-- Doing things in a new and better wa y.-- entrepreneurial role calls for decision making
under uncertaint y.
According to Casson,-- entrepreneurship consists of an eccentric(unusual )evaluation of economic events whichother people are unwilling to support .
-
8/8/2019 ESME-- 2010
25/192
Acc to Ke ynes:--abilit y to mobilize the resources and combinethem to initiate change in production .
Adit ya Mittal:-- Entrepreneurship is a state of mind and can be
applied to an y number of different fields .-- it is critical as it helps to prevent stagnation b y
challenging traditional thinking and drives progress and development that can bring aboutlong term change .
-
8/8/2019 ESME-- 2010
26/192
-- ever yone has the potential to be entrepreneurialin their thinking and approach .
Finall y,An entrepreneur ma y at best be defined as a person responsible for existence of new businessenterprises .
-
8/8/2019 ESME-- 2010
27/192
II. Phases of Entrepreneurship DevelopmentThree Phases:
1. Initial Phase
2.Development Phase
3.Support Phase
-
8/8/2019 ESME-- 2010
28/192
1.Initial Phase:Creation of awareness about the entrepreneurialopportunities based on surve y.
2.Development Phase: [E DP]Implementation of training programmes todevelop motivation and managerial skill .
3.Support Phase: Infrastructure support of counselling and assisting to establish a newenterprise and to develop existing units .
-
8/8/2019 ESME-- 2010
29/192
EDP: Entrepreneurial Development Programme .EDP is primaril y meant for developing those first-generation entrepreneurs, who on their own cannot
become successful entrepreneurs .
EDP covers 3 areas .1.Location2.Target Group3.Enterprise [ Entrepreneurial activities]
-
8/8/2019 ESME-- 2010
30/192
Instit u tion al Su ppo r t to T ra ining a ndInstit u tion al Su ppo r t to T ra ining a ndEnt r ep r ene ur ship Deve lopment:Ent r ep r ene ur ship Deve lopment:
National Level: [Promotion of MSMEs]1. NISIE T National Institute Small Industr y
Extension Training, Hyderabad .
2. IIE The Indian Institute of EntrepreneurshipGuwahati .
3. NIES BU D National Institute Entrepreneurshipand Small Business Development
-
8/8/2019 ESME-- 2010
31/192
To promote entrepreneurship development in India,the Ministr y has two schemes:
Promotion of;1.Entrepreneurship Development Institutions[ E DI]
2. National Entrepreneurship Development Board[ NEDB ]
-
8/8/2019 ESME-- 2010
32/192
Objectives of these Programmes:
1.Promoting entrepreneurship for creating self-emplo yment through enterprise creating .
2.Facilitating creation of training infrastructure
3.Supporting research of entrepreneurship relatedissues .
-
8/8/2019 ESME-- 2010
33/192
III . Factors Influencing Entrepreneurship .1.Technical knowledge
2.Entrepreneurial Training
3.Market contacts
4.Famil y business
5.Availabilit y of capital
-
8/8/2019 ESME-- 2010
34/192
6.Successful role models
7.Local manpower
8.Capable advisors& supporters
9.Supplier assistance
10.G overnmental & Institutional support .
-
8/8/2019 ESME-- 2010
35/192
U nit III .1.Entrepreneurial Motivation and the
Motivating Factors2. Entrepreneurship Development in India3.R ural Entrepreneurship4.International Opportunities .
-
8/8/2019 ESME-- 2010
36/192
Entrepreneurial Motivation and theMotivating Factors
Motivation:The term motivation has been derived from theword motive .
Motive ma y be defined as an inner state of our mind that moves or activates or energizes anddirects our behaviour towards our goals .
-
8/8/2019 ESME-- 2010
37/192
Motivation ma y be defined as the process thatmotivates person into action and induces him to
continue the course of action for the achievementof goals .It is an ongoing process because humanneeds/goals are never completel y satisfied .
Entrepreneurial MotivationMotive
Goal Behaviour
-
8/8/2019 ESME-- 2010
38/192
I. Maslows Need Hierarchy Theory:1.Physiological Needs.
Entrepreneur also being a man needs to meethis/her ph ysiological needs for survival . Hence,he/she is motivated to work in the enterprise tohave economic rewards to meet the basic needs .
2.Safet y Needs .Economic securit y and protection: Meeting theseneeds requires more mone y and hence, theentrepreneur is promoted to work more in his/her enterprise .
-
8/8/2019 ESME-- 2010
39/192
3.Social Needs: A n entrepreneur is motivated to interact with
fellow intrapreneurs, his/her emplo yees andothers .
4.Esteem Needs: In case of entrepreneurs, the ownership and self-control over the enterprise satisfies their esteem
needs b y providing them status, respect,reputation and independence .
-
8/8/2019 ESME-- 2010
40/192
5. Self-ActualizingAn individual ma y self-actualize in being asuccessful entrepreneur .
Based on this Maslows hierarch y of needs, for entrepreneurs, it is mainl y social, esteem and self-actualization needs that motivate them to work more and more for satisf ying them .
-
8/8/2019 ESME-- 2010
41/192
II. McClellands Acquired Needs Theor y:1. N eed for Affiliation2. Need for power 3. Need for Achievement:
This refers to ones desire to accomplishsomething with own efforts .
But in case of an entrepreneur, the high need for achievement is found as the dominating one .
-
8/8/2019 ESME-- 2010
42/192
Motivating Factors:Acc . To P .N.Sharma1.Educational background
2.Occupational experience
3.Desire to do work independentl y
4.Famil y Background
-
8/8/2019 ESME-- 2010
43/192
5.Assistance from government
6.Assistance from financial institutions
7.Availabilit y of Technolog y/raw material
8. Financial assistance from venture capital
-
8/8/2019 ESME-- 2010
44/192
Acc . M.Chandra Sekhor Facilitating Factors:1.Success stories of entrepreneurs
2.Previous association
3.Previous experience
4.Inherited propert y
5.Influence of others
-
8/8/2019 ESME-- 2010
45/192
-
8/8/2019 ESME-- 2010
46/192
Entrepreneurship Development in IndiaApproaches to E DEntrepreneurship development should integrate
-- Entrepreneurial Training,
-- Provision of Incentives,-- Consultanc y services-- Sectoral Development .
-
8/8/2019 ESME-- 2010
47/192
Entrepreneurship Development Programme:Objectives of E DP programmes .1.To give substance to the governments policies of
simulation of economic growth .
2.Dispersing( Separate ) industries to rural areas .
3.Promoting the processing of local raw materials .
-
8/8/2019 ESME-- 2010
48/192
Entrepreneurial Development:1.Entrepreneurial education2.Publicit y for entrepreneurial opportunities3.Identification of potential entrepreneurs4. Guidance in selecting products and preparing
project reports .5.Availabilit y of local agencies with trained
personnel for entrepreneurial counselling and promotions .
6.R ecognition of entrepreneurial skills .
-
8/8/2019 ESME-- 2010
49/192
Issues of E DPs:1.Structure and Composition of E DPs.
2. Areas of Operation
3.Fixing Priorities
4.Lack of specialists support .
-
8/8/2019 ESME-- 2010
50/192
3. R ural Entrepreneurship:R ural Entrepreneurs:The entrepreneur who brings in overall change
through innovation, new ideas for the maximumsocial good in rural areas is a rural entrepreneur .
-- R ural entrepreneur is one of the segments of ruralgrowth .
-- he is responsible for effecting change, add valueto art and crafts .
-
8/8/2019 ESME-- 2010
51/192
R ural Industr y:-- rural industr y includes village and small
industries .
-- cottage industr y is an important aspect of ruralindustr y.
-- rural industr y appropriate for the rural areas .
-- rural industr y serves the requirements of rural people as well as other markets .
-
8/8/2019 ESME-- 2010
52/192
Classification of R ural Entrepreneurs :
1.Agriculture Entrepreneurs .
2.Micro Entrepreneurs .
3.Small Business Entrepreneurs
4.R ural Artisans[skilled craftsman] .
-
8/8/2019 ESME-- 2010
53/192
-
8/8/2019 ESME-- 2010
54/192
-
8/8/2019 ESME-- 2010
55/192
Ty pes of Industries:1.H andicrafts:[ R aw materials can be wood, metal
clay, cloth etc to produce consumer articles .
-- All India handicrafts Board .
-- Handlooms and Handicrafts Export PromotionCorporation promotes exports from this sector .
-- The products are,carpets, printed textiles, art,metal wares, Zari goods, embroidered goodsetc .gems and jeweller y.
-
8/8/2019 ESME-- 2010
56/192
2.Handloom Industries .
3.Sericulture .[Product from silk]
4.Coir Industries .
5.Khadi and Village Industries .
-
8/8/2019 ESME-- 2010
57/192
Problems of Entrepreneurship:1. Inadequate flow of credit, obsolete technolog y,
machiner y and equipment .
2. Poor qualit y standards .
3. Inadequate infrastructural facilities .
-
8/8/2019 ESME-- 2010
58/192
Inte r na tion al Ent r ep r ene ur ship Oppo r tu nitiesInte r na tion al Ent r ep r ene ur ship Oppo r tu nities
International Business
Exporting Non equit y Direct foreigna) Direct arrangement investment
b) Indirect
-
8/8/2019 ESME-- 2010
59/192
a) Indirect exporting :-- foreign purchaser in the local market or through-- export management firm
they will take care of * selling, marketing, deliver y and an y technical
problems involved in the export process .
b) Direct exporting:-- compan ys overseas sales office will be there .-- independent foreign distributors also will be
there .
-
8/8/2019 ESME-- 2010
60/192
N on Eq u ity A rra ngements1.Licensing
2.Turn ke y projects3.Management contracts .
1.Licensing:-- right to use a patent, trademark, technolog y, production process etc .-- this involves low risks and generate incremental
income .
Wolverine world wide Inc opened a Hush Puppies store inSofia, Bulgaria through licensing agree . With Pikin .
-
8/8/2019 ESME-- 2010
61/192
2.Turn ke y projectsHaving a foreign entrepreneur build a factor y or
other facilit y, train the workers, train themanagement and then turn it over to local ownersonce the operation is going .
-- finance is provided b y the local compan y or theGovt with periodic pa yments being made over the
life of the project .
-
8/8/2019 ESME-- 2010
62/192
3.Management Contracts:-- entrepreneurs have successfull y entered
international business b y contracting their management techniques and skills .
Direct Foreign Investment:1.Joint ventures
2.Minorit y and Majorit y equit y positions are alsomethods for making direct foreign investments .
-
8/8/2019 ESME-- 2010
63/192
U nit : IVProjects Management1.Concept of projects and classification2.Project Identification3.Formulation4.Project Design5.R eport and Project Appraisal .
-
8/8/2019 ESME-- 2010
64/192
Project ManagementEntrepreneurial ventures use project management to
accomplish outcomes under conditions of limitedresources with critical time constraints .
PM is one of the basic approaches followed b y entrepreneurs to accomplish things the y undertake .
PMI defines PM as the application of knowledge,skills, tools, and techniques to project activities tomeet project requirements .
-
8/8/2019 ESME-- 2010
65/192
There is a huge variet y of projects that anentrepreneur is likel y to undertake starting with
researching and writing the business plan tosetting up the plant to executing orders fromclients .
In the broadest sense, a project can be defined as a finite task to be completed.
-
8/8/2019 ESME-- 2010
66/192
Purpose: The project has a well defined end goal . The goal itself might be made up of several sub
goals . A project can be subdivided into severalsubtasks, which must be completed in order toachieve the project goals .
Classification of Projects:1.Q uantifiable and Non quantifiable Projects
2.Sectoral Projects3.Techno Economic Projects4.Services Projects
-
8/8/2019 ESME-- 2010
67/192
1.Q uantifiable and Non quantifiable ProjectsQuantifiable : Projects concerned with
-- Industrial development-- Power generation-- Mineral development
Non quantifiable Projects: Projects involving-- Health-- Education-- Defence
-
8/8/2019 ESME-- 2010
68/192
2. Sectoral Projectsa) Agricultural & Allied sector
b) Irrigation & Power sector c) Industr y & Mining sector d) Transport& Communication sector
e) Social Service sector
3.Techno Economic Projects
a) Agricultural, Forestr y & Fishing b) Mining & Quarr yingc) Manufacturing
-
8/8/2019 ESME-- 2010
69/192
d) Constructione) Electricit y, gas, water and sanitar y servicesf ) Transport, storage and communications .
4. Service Projectsa) Welfare projects
b) Service projectsc) R esearch & Development projectsd) Educational projects
-
8/8/2019 ESME-- 2010
70/192
Phases of Project Management
Start Identification Formulation Appraisal
Selection Implementation Management
d f
-
8/8/2019 ESME-- 2010
71/192
Project Identification:An entrepreneur has an infinitel y wide choice with
respect to this project . The important dimensionsof choice are-- Product / Service
-- Market, scale of production-- Technolog y, location, Incentives-- Equipment etc .
-
8/8/2019 ESME-- 2010
72/192
Project Identification is concerned with-- collection,
-- compilation and anal ysis of economic data-- for the eventual purpose of locating possible
opportunities for investment and
-- with the development of such opportunities .
Criteria for selecting a particular project:
1.Investment size2.Location3.Technolog y
4 E i t
-
8/8/2019 ESME-- 2010
73/192
4. Equipment5. Marketing .
Importance of Project Identification:1.They become the catal ytic agents of economic
development2.Projects usuall y involve substantial financial
outla ys3.Projetcs commitments cannot be easil y reversed4.PI brings the necessar y changes in societ y in
course of time5.Project accelerate the process of socio cultural
development .
-
8/8/2019 ESME-- 2010
74/192
St a ges of P r oje ct Fo r m ula tion
-
8/8/2019 ESME-- 2010
75/192
g jFeasibilit y anal ysis
Techno- Economic Anal ysis
Project Design & Network Anal ysis
Input Anal ysis
Financial Anal ysis
Social- Cost Benefit Anal ysis
Pre - Investment Anal ysis .
N t k A l i It i t hi h l b th
-
8/8/2019 ESME-- 2010
76/192
Network Anal ysis: It is a s ystem which plans bothlarge and small projects b y anal yzing the project
activities . Projects are broken down into simpleactivities, which are then arranged in a logicalsequence . It is also decided to which task will be
performed simultaneousl y and which otherssequentiall y.
Project Anal ysis of Scheduling Time co-ordinating
Design Pro . Activities Pro .Act costs the activities .worked out
NETWO R K DESI GN
P j t R t
-
8/8/2019 ESME-- 2010
77/192
Project R eport :A project report is prepared for anal yzing the extent
of opportunities in the contemplated project .
It gives a complete anal ysis of the inputs and outputs
of the project .
It enables the entrepreneur to understand at the
initial stage, whether the project is sound ontechnical, commercial, financial and economic
parameters .
-
8/8/2019 ESME-- 2010
78/192
-
8/8/2019 ESME-- 2010
79/192
Main stages of the s ystem of project appraisal are
-
8/8/2019 ESME-- 2010
80/192
Main stages of the s ystem of project appraisal areStep 1 :Economic Indicates priorit y use
Step 2 : Technical Involves scale of the projectand the process adopted
Step 3:Organizational Suitabilit y is examined
Step 4: Managerial Adequac y & competence arecriticall y scrutinised
Step 5: Operational Capabilit y of the projectStep 6: Financial Determines the financial
viabilit y.
i S i hi S i h
-
8/8/2019 ESME-- 2010
81/192
Unit IV: St ar ting the Vent ur e.Unit IV: St ar ting the Vent ur e.
1.B usiness Plan2.Marketing Plan3.Financial Plan
4.Organizational Plan5.Financing the venture
a) Source of Capital b) Venture Capital .
-
8/8/2019 ESME-- 2010
82/192
-
8/8/2019 ESME-- 2010
83/192
(b) Se r vice Ente r p r ises : The enterprises engaged
-
8/8/2019 ESME-- 2010
84/192
(b) Se r vice Ente r p r ises : The enterprises engagedin providing or rendering of services and are
defined in te r ms of investment in eq u ipment .
The limit for investment in plant and machiner y /
equipment for manufacturing / service enterprises,as notified, vide S .O. 1642 (e ) dtd .29- 09-2006 areas under:
-
8/8/2019 ESME-- 2010
85/192
Service Sector
-
8/8/2019 ESME-- 2010
86/192
Service Sector Ente r p r ises Investment in eq u ipments
Micro Enterprises : Does not exceed ten lakhrupees
Small Enterprises : More than ten lakh rupees but
does not exceed two crorerupees
Medium Enterprises: More than two crore rupees but does not exceed five corerupees
The P r od uc t G r ou p Ma tr ix
-
8/8/2019 ESME-- 2010
87/192
There are about twent y-one major industr y groups inthe small scale sector . These are listed below :
- Food Products
- Chemical & Chemical Products- Basic Metal Industries- Metal Products- Electrical Machiner y & Parts
- R ubber & Plastic Products- Machiner y & Parts Except Electrical goods- Hosier y & Garments - Wood Products- Non-metallic Mineral Products
Paper Products & Printing
-
8/8/2019 ESME-- 2010
88/192
- Paper Products & Printing- Transport Equipments & Parts
- Leather & Leather Products- Miscellaneous Manufacturing Industries- Other Services & Products- Beverages, Tobacco & Tobacco Products- R epair Services- Cotton Textiles- Wool, Silk, S ynthetic Fibre Textiles
- Jute, Hemp and Mesta Textiles- Other Services
-
8/8/2019 ESME-- 2010
89/192
-
8/8/2019 ESME-- 2010
90/192
-
8/8/2019 ESME-- 2010
91/192
-
8/8/2019 ESME-- 2010
92/192
1 Small Scale Industries:
-
8/8/2019 ESME-- 2010
93/192
1.Small Scale Industries:SMEs existed in India for a long time in various
sectors and contributed significantl y in bringingdown;
-- regional imbalance;
-- generating emplo yment opportunities,output, and exports;
-- fostering entrepreneurship;
--accelerating economic development .
-
8/8/2019 ESME-- 2010
94/192
-
8/8/2019 ESME-- 2010
95/192
-- or the rendering of services and the
-
8/8/2019 ESME-- 2010
96/192
-- or the rendering of services and theundertaking supplies or renders or proposes
to suppl y or render not less than 5 0 per centof its production or services
-- The amount not exceed R s 10 million
3.Tiny Enterprises
Investment limit in plant and machiner y inrespect of tin y enterprises is R s 2 .5 millionirrespective of location of the unit .
Scope and Ty pes of Small Business
-
8/8/2019 ESME-- 2010
97/192
Scope and Ty pes of Small BusinessScope of Small Scale Enterprises
Manufacturing Trading Services1Village & Cot Ind Whole sale Professional serv .
2 Handlooms& Handicrafts R etail Commercial serv .3 Modern SSI Franchise Personal ser i SSI Financial ser .
ii Ancillar y U
nits I T serv .iii Tiny U nits4 Artisans
-
8/8/2019 ESME-- 2010
98/192
-
8/8/2019 ESME-- 2010
99/192
2 Industrial Polic y for Small Scale Industries
-
8/8/2019 ESME-- 2010
100/192
2. Industrial Polic y for Small Scale Industries .
Objectives of Industrial Polic y:
1.To maintain a sustained growth in productivit y.
2. To enhance emplo yment opportunities .
3. To attain international competitiveness
1 .L icensing po licy:
-
8/8/2019 ESME-- 2010
101/192
e s g po y:
-- List of Industries reserved for Small scale
industries are exempted from obtaining fromlicense .
-- Drugs and pharmaceuticals have been removedfor the compulsor y license .
-- onl y five industries are under compulsor y licensing due to environmental, safet y andstrategic considerations .
-
8/8/2019 ESME-- 2010
102/192
3.Liberalization of Location Polic y:
-
8/8/2019 ESME-- 2010
103/192
3.Liberalization of Location Polic y:-- Entrepreneurs are free to select an y place for the
location of their business .
- But approval is required if it is located with in 25
KM where the population is more than onmillion .
-- This polic y may not applicable to the electronic,computer based industr y, printing industries etc .
4.Polic y for small scale Industries for reservation of
-
8/8/2019 ESME-- 2010
104/192
4.Polic y for small scale Industries for reservation of products .
-- 11 4 items are reserved for SSI .
-- If an y non SSI wants to manufacture the items
reserved for the SSI then the y need to obtain anindustrial license and undertake export obligationof 5 0% of their annual production .
-- this condition will not applicable to an y undertakings operating under 100% EO U .
5.Exim polic y for small scale sector .
-
8/8/2019 ESME-- 2010
105/192
p ySchemes of Government of India for SSI:
1.Organization of specialized training programmeson packaging for exports in collaboration with theIndian Institute of Packaging, Bomba y.
2.Assistance to SSI units for participation in theInternational and Internal Trade fairs .
3.Dissemination of export information to SSIthrough Technological Information PromotionsSystems [ TIPS] .
4. Incentives for qualit y production in the SSI
-
8/8/2019 ESME-- 2010
106/192
4. Incentives for qualit y production in the SSIsectors .
EXIM Polic y:-- Status like export/trading/ start trading/super star
trading are given to the small, medium exporters
based on the prescribed export performance level .
-- if the status is claimed in terms of FO B value of
exports, double weightage is given to the exportof products manufactured b y SSI .
-
8/8/2019 ESME-- 2010
107/192
Infrastructural Set U p:
-
8/8/2019 ESME-- 2010
108/192
p1.18 Export Promotion Council for the promotion of
specific commodities .2.Chamber of Commerce and Industr y and Asso .of
Trade and Industr y.
3.Federations of Indian Export Organizations[FIEO]4.Trade Fair Authorit y of India[ TFAI] .5.Agricultural and Processed Food Products Export
Development Authorit y.6.Spices Trading Corporation of India Ltd .7.Tea Trading Corporation of India ltd .
Special Import License (SIL )
-
8/8/2019 ESME-- 2010
109/192
Special Import License (SIL )-- Exporters recognized as Export Houses, Star
Trading House, Trading Houses, etc . Are eligiblefor grant of special Import License (SIL ) @certain percentage of their FO B value of exports
-- However, 2 percent additional SIL is grantedfor exports of Products manufactured b y units
registered as SSI, provided the exports of these products is more than 5 0% of the exports duringthe period
-
8/8/2019 ESME-- 2010
110/192
Export Processing Zones:
-
8/8/2019 ESME-- 2010
111/192
p g-- To encourage the exporters who manufacturing
the products are getting incentives from GOI b y establishing EPZs .
-- EPZS and EO U s are under the purview of
Ministr y of Commerce .-- EPZs provided with basic infrastructural facilities
at reduced rates and
-- Developed land sites, standard designed factor y buildings, roads, power, water and drainage also banking, post office facilities etc .
Packaging for export
-
8/8/2019 ESME-- 2010
112/192
g g p-- With a view to acquaint SSI Exporters of the
latest Packaging standards, techniques etc . training programmes on packaging for exports areorganized in various parts of the countr y.
-- These programmes are organised in associationwith Indian Institute of Packaging which has
requisite expertise on the subject .
Technical & managerial consultanc y services
-
8/8/2019 ESME-- 2010
113/192
g yTechnical & Managerial Consultanc y Services to
the SSI manufacturers/exporters is providedthrough a network of field offices to ensurehigher level of production and generation of higher exports .
Marketing development assistance
-
8/8/2019 ESME-- 2010
114/192
Marketing Development Assistance (M DA) is
being operated b y Ministr y of Commerce under which M DA is given to exporters through FIEOand Export Promotion Councils/ Commodit y Boards to plan their marketing strateg y for export
growth .
Eligible exporters: -
-- Status Holder exporters namel y Export Houses,Trading Houses etc . They would be eligible to getMDA through FIEO .
-
8/8/2019 ESME-- 2010
115/192
-
8/8/2019 ESME-- 2010
116/192
UPTECH:
-
8/8/2019 ESME-- 2010
117/192
A new scheme for technolog y up gradation for
industrial clusters has been started recentl y.
The scheme aims at diagnostic stud y of the
clusters, identification of technological needs,technological intervention and wider dissemination of information and technolog y within the clusters .
U nit: VI
-
8/8/2019 ESME-- 2010
118/192
: V1.Process of Setting up a Small-Scale
Industr y.2.Enterprise Location .
3.Financing small business .4.Legal Framework for Small Business .
1.Process of Setting up a Small-Scale Industr y.
-
8/8/2019 ESME-- 2010
119/192
g p y1.Selection of Industr y.
2.Arrangement for Technical Know-howi) Prepare Project R eport
[ Project report includes Marketing, Pricingstrategies, Financing, Staffing etc .]
3.Appl y to Financial Institutions
4. Selection of Location and Acquisition of Premises .
-
8/8/2019 ESME-- 2010
120/192
5.Appl y to D.I for R egistration and NOC, Power allotment .
6.Appl y to Local bod y/ Pancha yat / Municipalit y for NOC and Permission .
7. Appl y for Power connectionPlace for Machiner y Appl y for Quota for R aw materials . R ecruit Staff .
-
8/8/2019 ESME-- 2010
121/192
-
8/8/2019 ESME-- 2010
122/192
-
8/8/2019 ESME-- 2010
123/192
For installing power looms, the y have get
-
8/8/2019 ESME-- 2010
124/192
permission from the Textile Commissioner, GOI.
2 .Registration of SSI:--All the SSI has to registered with the Director of
Industries in their state .
--Cop y of this application for registration has to be
sent to the Director of Small Service Institute inthe concerned state .
-- This will help the SSI in obtaining financial
-
8/8/2019 ESME-- 2010
125/192
assistance from the government and for obtaining
machiner y on hire- purchase from the NSIC .
-- Assistance in the suppl y of
i) controlled raw materialsii) specific certificate for imported raw materialsiii) facilities for export promotion
Will be easil y available if the y registered with theState Director of Industries .
-
8/8/2019 ESME-- 2010
126/192
4 .Machinery:NSIC d hi h h
-
8/8/2019 ESME-- 2010
127/192
-- NSIC: under hire- purchase scheme .
-- NSIC has acquired the necessar y experience in the procurement of machines from the right sources .
-- it takes care of the problems up to the stage of deliver y of machines to the entrepreneurs .
--Small entrepreneur should enlist with the NSIC .
-- This application form should be accompanied withR egistration Certificate and report of the DI.
-
8/8/2019 ESME-- 2010
128/192
Directors of Industries : Allot quotas of raw
-
8/8/2019 ESME-- 2010
129/192
materials .
Chief Controller of Imports : They issue licensesAnd Exports and its Port for import of raw
Offices materials .
6 .Marketing : Internal
-
8/8/2019 ESME-- 2010
130/192
1.Small Industries Service Institutes . [SISI]
-- They enlist the units for participation under Central Govt stores purchase programme .
-- Issue competenc y certificates to the unitsreceiving Govt orders .
2.National Small Industries Corporation . [ NSIC]
-- Secure contracts from the Director- General of Supplies and Disposals, R ailwa ys and Defence .
3.State Small Industries Corporations: SSIC
-
8/8/2019 ESME-- 2010
131/192
-- secure orders from the state governments .
4. Small Industries Service Institute: Export .-- render technical counselling for satisfactor y execution of export orders .
-- disseminate information about the items havingexport markets .
5.Chief Controller of Imports and Exports:-- issue license s for export of products to foreigncountries .
-
8/8/2019 ESME-- 2010
132/192
7. Incentives for SSI:
-
8/8/2019 ESME-- 2010
133/192
SIDO : Co-ordinates policies and programmes at the
national level and provides extension services .
State level: State Directories of Industries,
SIDC, FC cater to the needs of Smallindustries, the needs include :land,shed, credit,power and raw materials etc .
NSIC : Provides machines and equipments on hire- purchase .assist units to participate in the Trg. Progs .
-
8/8/2019 ESME-- 2010
134/192
IDEMI: Institute for the Design of ElectricalM i I M b i
-
8/8/2019 ESME-- 2010
135/192
Measuring Instruments, Mumbai .
-- provides technical know how & Testing,-- calibration, training facilities for manufacturersof electrical measuring instruments .
R ural Industries Projects [ R IP]Artisans Development Programme is covered b y
this Projects .
Enterprise Location .Enterprise Location .
-
8/8/2019 ESME-- 2010
136/192
Location Polic y:
Other than cities of more than 1 million population there is no requirement for theapproval from the central govt, except the
industries under compulsor y licensing .
Any polluting industries should be located outside
25 Kms .
Factors Influencing Location of an Enterprise:
-
8/8/2019 ESME-- 2010
137/192
1.Selection of R egion
2.Selection of Communit y
3.Selection of Site
4.Optimum selection of site .
1.Selection of R egion
-
8/8/2019 ESME-- 2010
138/192
a) Availabilit y of raw materials
b) Nearness to marketc) Availabilit y of power and fueld) Transporte) Suitabilit y of climatef ) Government polic yg) Competition among statesh) Metrological & Topograph y [Atmospheric
phenomena, especiall y weather and weather conditions & landscape /geograph y]
-
8/8/2019 ESME-- 2010
139/192
-
8/8/2019 ESME-- 2010
140/192
4.Optimum selection of sitef
-
8/8/2019 ESME-- 2010
141/192
Optimum selection of industr y is based on the
comparative economic surve y of the alternativesites in question .
Financing small business .1 SIDB I
-
8/8/2019 ESME-- 2010
142/192
1.SIDB I
Banks1.Commercial Banks2.RRB s [R egional R ural Banks]
3.Co- operative banks
State Level Others:1.SFC 1.N ABARD2.SIDCs 2 .NSIC3.SIICs[ State Industrial Investment Cor]4.SSI DCs
-
8/8/2019 ESME-- 2010
143/192
2.Medium Term Finance [ Period of 1 to 5 years]
-
8/8/2019 ESME-- 2010
144/192
Sources of financea) Issue of Debentures
b)Loans from banks & other financial institutions
c)Public deposits [ for existing concerns]d) Ploughing back of profits [for existing concerns]
3.Long Term finance [5 years and above]S f fi
-
8/8/2019 ESME-- 2010
145/192
Sources of finance
a)Issue of shares b)Issue of debenturesc)Loans from financial institutions
d)Ploughing back of profits [for existing concerns] .
Guidelines followed b y the banks:1 Th d b i i
-
8/8/2019 ESME-- 2010
146/192
1.The debt equit y ratio
2.Turnover to net worth3.R eturn on capital emplo yed4.Net profit as a percentage of net worth
5.Dividend paid to shareholders6.R atio of current assets to current liabilities .
Assistance b y SFCs, SI DC & Commercial Banks .Fi i
-
8/8/2019 ESME-- 2010
147/192
Financing
-- of new projects in the S&M size categor y-- for modernization of S&M industries-- for rehabilitation of S&M industries
-- of import of capital equipment .
SIDB I: Services of SI DB I are,
-
8/8/2019 ESME-- 2010
148/192
1.Promotion
2.Financing3.Development of Industries in the small- scale
sector
4.Co-ordinating the functions of institutions engagedin similar activities .
5.R efinance
6.Bills financing7.Project & equit y finance .
Direct finance: through 38 offices providingschemes to specific target groups
-
8/8/2019 ESME-- 2010
149/192
schemes to specific target groups .
Indirect finance: b y refinance and billsrediscounting through 894 primar y lendinginstitutions having 65, 000 outlets across thecountr y.
Financial Assistance to Small- scale U nits:1 R l t th SS it g t d t
-
8/8/2019 ESME-- 2010
150/192
1. R upee loans to the SS units are granted at
concessional rates of interest .
2. Non commitment charge is levied on loans up
to R s.5 lakhs to units in the small scale sector .
3. Commitment charge at the rate of 1%is levied on
all other loans after an initial grace period of 12months from the date of sanction .
4.But, units located in categor y A backwardareas are totall y exempted from commitment
-
8/8/2019 ESME-- 2010
151/192
y pcharges on rupee loans .
5. And units located in categor y B&C areas areeligible for 5 0% concession on the commitment
charges .
6.The SSI are allowed a debt- equit y ratioextending up to 2 .5. The promoters contributionnorm varies between 12.5% to 22 .50%,depending on the location of the project andstatus of the entrepreneurs .
Credit Facilities to SSI:1 B anking s ystem provides mainl y working capital
-
8/8/2019 ESME-- 2010
152/192
1.B anking s ystem provides mainl y working capitaland SFCs provides investment capital .
2. The credit provided b y banks to this sector wastreated as credit to Priorit y Sector .
3. The commercial banks are required to lend 4 0% of their total loans of which 15 to 16% is
required to be in the form of direct agriculturaladvances and the rest can be to the SSI andindirect agricultural loans etc .
4.Assistance is provided to new units b y way of interest free loans to fill the shortfall inequit y
-
8/8/2019 ESME-- 2010
153/192
interest free loans to fill the shortfall inequit y.
The loans are repa yable over a period of 5 to 7years after an initial moratorium period of 5 to 7
yrs.
Financial Assistance to Medium- Scale U nits:1 For medium scale units located in
-
8/8/2019 ESME-- 2010
154/192
1.For medium scale units located in
backward areas 12.50% Non- backward areas 14% of interest .
2.Commitment charges:A backward areas -- No commitment charges .B&C backward areas commitment charge at the rate of
.5% per annum shall be levied after allowing the normal
period of a grace of six months from the date of sanction .
3.Non backward areas - 1% as commitment charges .
Legal Framework for Small Business .f l
-
8/8/2019 ESME-- 2010
155/192
Ty pes of controls:1.Formal
Informal
2.DirectIndirect
3.ProtectivePromotional
SSIs are regulated b y the following Acts .1.The Workmens compensation Act 1923
-
8/8/2019 ESME-- 2010
156/192
1.The Workmens compensation Act 1923
2.The Trade U nions Act 1926
3.The Pa yment of Wages Act 1936
4.The Industrial Disputes Act 1947
5.The Factories Act 1948
6.The Shops and Commercial Estab . Act 1948
-
8/8/2019 ESME-- 2010
157/192
Others:1 The Industrial Development Regulations Act
-
8/8/2019 ESME-- 2010
158/192
1.The Industrial Development R egulations Act
2. Indian Boiler Act3.Income Tax Act4.The central and State Sales Tax Act
5. Drugs controls Act6.The companies Act .
U nit : VII
-
8/8/2019 ESME-- 2010
159/192
1.Institutional assistance to Small ScaleIndustries .
2.Women Entrepreneurship .
3.Incentives and Facilities for Exporters of
Small Scale Sector .
Institutional Assistance to Small ScaleIndustries .
-
8/8/2019 ESME-- 2010
160/192
Institutional assistance to SSI b y way of;1.Promotional2.Financial
3.Technical4.Marketing5.Training6. Others7.Associations .
1.Promotional:
-
8/8/2019 ESME-- 2010
161/192
a. DISG g.EC b. SIDO h .SDCc. SSIC i .NSIC
d. SIIC j .NPCe. IDC k .IBSf . COI R BOA RD l. DIC
2. Financial
-
8/8/2019 ESME-- 2010
162/192
SFC NABARDIFCI KVICCB HD FC
LIC/ U TI SCIC[ shipping credit and Inv .com]SIDB I world bank HU DCO
3.Technicala ITCO
-
8/8/2019 ESME-- 2010
163/192
a.ITCO
b.CITDc.IDEMId.NID
e. Pollution control boardsf .The Technolog y Dev.and Information Compan y
of India
g.The Products and Process Development Centres .
4. Marketinga.The Investment centres
-
8/8/2019 ESME-- 2010
164/192
b.EPCc.CB/ EH/ EICd.IIP
e.STC of Indiad.Jute Corporation of Indiaf .Minerals and Metals Trading Corporation of India
g.EXIM Bank of Indiah.The Indian Institute of Foreign Tradei.Export Credit Guarantee Corporation of India Ltd .
5.Traininga.The Centre for Entrepreneurship Development
-
8/8/2019 ESME-- 2010
165/192
b.The Entrepreneurship Development Institute of India
c.The Management Development Institute
d.The Institute of Management
e.Institute of Entrepreneurship Development
f .The National Institute for Entrep &Small BusinessDev
-
8/8/2019 ESME-- 2010
166/192
g.Training of R ural Youth for Self- Emplo yment
h.The Indian Institute of Entrepreneurship
i.EDPs of SI DB I
j.The National Institute of Fashion Technolog y.
6.Associations:a.The National Alliance of Young Entrepreneur .
-
8/8/2019 ESME-- 2010
167/192
b.The Association of Women Entrepreneurs of Karnataka .
c.The Coimbatore District Small IndustriesAssociation
d.Industrial Associations
e.Associated chambers of Commerce and Industr y of India .
f .Federation of Associations of Small Industries of India
-
8/8/2019 ESME-- 2010
168/192
g.Federation of Tiny and Small Industries of India
h.Federation of Micro and Small and Medium
Enterprises .
i.National Association of Software and Service
Companies . j.Association of Lad y Entrepreneurs of AndhraPradesh .
7.R esearch Institutions .a.The Central Manufacturing Technolog y Institute
-
8/8/2019 ESME-- 2010
169/192
g g y
b.Automotive R esearch Association of India
c.The Central Leather R esearch Institute
d.The Council of Scientific and Industrial R esearch
e.Process and Product Development Centre .
Women Entrepreneurship:-- IDB I has provided under a special scheme,
-
8/8/2019 ESME-- 2010
170/192
p p ,
refinancing at a concessional rate of 9 % a year, theceiling on the rate of interest on the loan being12.5%.
-- IDB I extends 100% refinancing to SFCs in respectof proposals covered under the automaticrefinancing scheme and 85 % if the proposals comeunder the normal refinancing scheme .
-
8/8/2019 ESME-- 2010
171/192
Gove r nment s chemes fo r women empowe r ment [WomenEntrepreneurship in Small Scale Industries]
-
8/8/2019 ESME-- 2010
172/192
The government programme for women development beganas earl y as 1954 in India but the actual participation beganonly in 1974 . At present, the Government of India hasover 27 schemes for women operated b y differentdepartments and ministries . Some of these are:
Integrated R ural Development Programme (I RD P)
Training of R ural Youth for Self-Emplo yment ( TR YSEM )
Prime Ministers R ojgar Yojana (PM R Y)
Womens Development Corporation Scheme (W DCS )Working Womens Forum
d h l
-
8/8/2019 ESME-- 2010
173/192
Indira Mahila YojanaIndira Mahila KendraMahila Samiti YojanaR ashtri ya Mahila Kosh
Khadi and Village Industries CommissionIndira Pri yadarshini YojanaSIDB Is Mahila U dyam Nidhi Mahila Vikas NidhiSBIs Sree Shaki Scheme
NGOs Credit Schemes National Banks for Agriculture and R ural Developments
Schemes
The experience in conducting E DPs for womenindicate that,
-
8/8/2019 ESME-- 2010
174/192
1.More time required to complete all legal and procedural formalities in view of the variousrestriction on their mobilit y.
2.Discrimination was evident during theimplementation stage but less once the unitswere established .
3.Women entrepreneurs had to face thediscouraging attitude of tradition bound traders .
4.Women coming from families in industrial and business activities could achieve success faster
-
8/8/2019 ESME-- 2010
175/192
than most others .
5.More married women in the age 3 0-45 were foundto be more reliable as their responsibilities towardstheir famil y were clearl y defined .
6. All successful women entrepreneurs had strongfamil y support in the form of finance and businessknow-how .
Incentives and Facilities to Exporters .1.D uty Drawback
-
8/8/2019 ESME-- 2010
176/192
2.Duty Exemption scheme
3.Excise R ebate
4.Marketing Development Assistance
5.Suppl y of R aw Materials
6.Export oriented U nits/ Export Processing Zone
-
8/8/2019 ESME-- 2010
177/192
7.Export Houses, Trading Houses and Star TradingHouses
8. Export Promotion Capital Goods Scheme .
9. Foreign Currenc y Accounts for Exporters .
10.Other Benefits .
1.D uty Drawback For a product exported from India, the manufacturer
-
8/8/2019 ESME-- 2010
178/192
would have paid duties as under,1. Import duties on raw materials and components
imported and2. Excise dut y on the items manufactured in India
The customs and Central Excise Duty Drawback R ules, 1971 provide for refund of such duties tothe exporter on the export being completed .
For claiming the drawback, the exporter should filewith the customs the cop y of the shipping bill
i hi 6 d f h ffi h
-
8/8/2019 ESME-- 2010
179/192
within 6o da ys after the customs officer at the port has given Let Export Order .
2.Duty Exemption Scheme .The scheme enables the exporter to importmaterials without pa yment of customs dut y. The
-
8/8/2019 ESME-- 2010
180/192
materials without pa yment of customs dut y. The
licence issued under this scheme is known asAdvanced Licence .
The items allowed to be imported under these licenseare such as are to be used in the manufacturer of goods to be exported from India .
After exports, the Duty Exemption EntitlementCertificate dul y completed b y the customs willhave to be surrendered to the licensing authorit y infulfillment of the export obligation imposed .
3.Excise R ebate .Finished goods which are subject to excise dut y for
home consumption are exempt from the dut y whe
-
8/8/2019 ESME-- 2010
181/192
home consumption are exempt from the dut y whethey are exported .
1. Export under bond . U nder this method, theexporter has to execute a bond in favour of central
Excise Authorities . 2. R efund of dut y. If the dut y is alread y paid, after
export is made the exporter should make a claim
with the central Excise authorities . Then the excisauthorities will arrange for the refund of the centraexcise .
4.Marketing Development Assistance .The government OF India has instituted Marketing
-
8/8/2019 ESME-- 2010
182/192
Development Fund for providing grants in aidfor the development of markets for Indian products abroad .
Schemes eligible for assiastance under the Fund are,a.Market surve y abroad
b.Publications for issue within the countr y or abroad .
c.Participation in exhibitions abroad .d.Setting up showrooms, warehouses .
e. R esearch and Developmentf . Setting up of foreign offices .
-
8/8/2019 ESME-- 2010
183/192
5.Suppl y of R aw materials .U nits engaged in exports are given priorit y in the
allotment of scarce raw materials such as steel . Incertain cases, the raw materials are arranged to besupplied at international process, much below theinternal prices .
6. Export Oriented U nits/ Export Processing Zone .U nits undertaking to export their entire production
-
8/8/2019 ESME-- 2010
184/192
of goods ma y be set up under the Export OrientedU nits scheme . These units in engaged in service activities ma y be
considered on merits .EPZ are free from domestic tariff area, where trade
barriers applicable to the rest of the econom y donot appl y and where export oriented units canoperate free of import duties including Taxexemptions .
Facilities for EPZ:1.Automatic approvals of proposals b y the
-
8/8/2019 ESME-- 2010
185/192
Development Commissioner on certainconditions .2.No licence required for import of capital goods,
raw materials, spares etc .3.Duty free import of capital goods and equipments
from preferred sources .4.Second hand capital goods allowed to be
imported .
5.Exemption from Central Excise Duty and other levies on products manufactured within the zone .
l f f
-
8/8/2019 ESME-- 2010
186/192
6.Complete exemption from Income Tax on profitsfor a period of 5 years .
7.Sub contacting part of job work to units in thedomestic market ma y be allowed .
8. Assured power suppl y.9.Green card to units for getting facilities like
Telephone, telex, cement, steel etx on priorit y basis .
7. Export Houses, Trading Houses and Star TradingHouses .
-
8/8/2019 ESME-- 2010
187/192
-- a registered exporter is a person holding validregistration certificate issued b y an ExportPromotion Council, Commodit y Board for the
purpose of export promotion .EH - 15 Cr TH - 75Cr STH - 300 Cr .-- SIL-- Foreign Currenc y A/cs
8.Export Promotion Capital Goods Scheme .U nder the EPC G scheme, capital goods ma y be
i d i l f d f
-
8/8/2019 ESME-- 2010
188/192
imported at a concessional rate of customs dut y of 25% of CIF value with an export obligation of 3times CIF value to be achieved within 4 years .
9.Foreign Currenc y Accounts for Exporters .Exporters with a net foreign earnings pf R s.4 Cr and
over during the preceding year ma y be permitted by RB to maintain foreign currenc y accounts in U Sdollars or pound with S BI,Public sector banks andforeign banks operating in India .
10.Other Benefits .1.Exemption from sales Tax/ Income Tax
-
8/8/2019 ESME-- 2010
189/192
2. Training facilities in India and Abroad . 3.Availabilit y of concessional finance from banks
and Exim bank .
-
8/8/2019 ESME-- 2010
190/192
-
8/8/2019 ESME-- 2010
191/192
-
8/8/2019 ESME-- 2010
192/192