euroflo centrifugal product flyers 2009

w h e r e i n n ova t i o n f l o w s

TM

www.euroflopumps.com

TM

full range of pumps series

EU/M EJ EILM ESC EMS EOH EMV ESP EH EISO

EMV/S/KseriesVertical Multistage Centrifugal Pumps

EMV/S/K series are vertical multistage, in-line port position with flange designed according to DIN standard or Victaulic coupling. Standard pumps are fitted with motor according to IEC, with motor efficiency class EFF1; EFF2 upon request.

All pumps are fitted with Cartridge type mechanical seal for easy change out without removing motor and adapter or the pipes.

Motor effi ciency class: EFF1

Flange: DIN/ANSI/JIS (slip-on type)Materials: Stainless Steel 304 or 316 with Cast iron or Stainless steel baseMounting: Vertical

DN 25 - 100 Q 0.2 to 120 m3/hrO.P. up to 24bar H up to 330m Ns up to 3,600rpmt -20ºC to 120ºC

Application:• Water supply and pressure boosting for buildings, water stations, water supply network• Irrigation and agriculture• Washing and cleaning systems• Fire fi ghting systems• Process water systems• Water treatment systems• Heating, ventilation and air-conditioning• RO water and desalination application

1 2 4 8 16 30 40 60 90 120 Q(m3/h)

H(m)250

200

150

100

80

60

40

20


TM


TM



End Suction Centrifugal Pumps

General purpose pump used for civil and agriculture industry pumps. Design with “ Back Pull Out” for ease of maintenances without disturbing pump alignments and piping. Dimensional and normal ratings to PN 10 or 16(optional), according to EN733/DIN 24255 standard.

Flange: PN 10 (std); PN 16 (optional)Materials: Cast Iron, Ductile Iron, Bronze, Cast Steel, Stainless SteelMounting: - Bare Shaft - Direct Coupled with Electric Motor or Engine

DN 32 - 400 Q 2,100m3/hrO.P. up to 10bar (std); 16bar (optional) H 150m Ns up to 3,600rpmt -10ºC to 105ºC(std); 150ºC(optional)

Application:• HVAC and Cooling Tower• Fire Protection and Fire Fighting• Marine – Ballasting & Bilge• Booster and Pressurization Set• Heating, ventilation and air-conditioning• Irrigation and agriculture

EUseries

7 22 36 72 180 288 360 720 1620

34

10

20

100

16015 60 400 600 800 2200 4000150

10

15

30

50

100

200

300400

Q(m3/h)

FEET

U.S.G.P.M.H(m)


TM


TM



End Suction Closed Coupled Centrifugal Pumps

General Purpose pumps used for Building & services, where space is a premium and a need for ease of alignments between pump and motor. This series of pump allow user to have a compacted foot print and consistences base dimension for OEM manufacturer.

Optional extra bearing for heavy duty to resist impeller vibration.

Flange: DIN 2332 (std); ANSI B16.5B (optional)Materials: Cast Iron, Ductile Iron, Bronze, Cast Steel, Stainless SteelMounting: - Bare Shaft - Monobloc - Extended Shaft or Stub Shaft

DN 32 - 150 Q 555m3/hrO.P. up to 10bar (std); 16bar (optional) H 5 - 90m(std); 150m upon request Ns up to 3,600rpmt -10ºC to 105ºC(std); 150ºC(optional)

Application:• HVAC and Cooling Tower• Fire Protection and Fire Fighting• Marine – Ballasting & Bilge• Booster and Pressurization Set• Heating, ventilation and air-conditioning• Agriculture and horticultural

EUMseries

7 22 36 72 180 288 360 720 1620

34

10

20

100

16015 60 400 600 800 2200 4000150

10

15

30

50

100

200

300400

Q(m3/h)

FEET

U.S.G.P.M.H(m)


TM


TM



Self-Priming, Semi Open-Impeller Centrifugal Pumps

Applicable for solid handling, abrasive resistance, negative suction condition, auto self priming* and/or replaceable and adjustable wear plates is required, this pump is capable to meet these requirement.

Pump can be mounted on trolley suitable for on/off road condition and vacuum assisted for well point application.

*not applicable for first dry prime

Flange: DIN 2332 (std); ANSI B16.5B (optional)Materials: Cast Iron, Ductile Iron, Bronze, Carbon Steel, Stainless Steel, HastelloyMounting: - Bare Shaft - Engine Driven - Closed Coupled (EJM)

DN 40 - 300 Q 1,250m3/hrO.P. up to 10barH 65m Ns up to 3,600rpmt -10ºC to 80ºC

Application:• Waste Water Treatment Plant• Sewage Treatment Plant• Portable Emergency Fire Fighting• Marine – Ballasting & Bilge• Transfer of liquid containing sand, particle and solid in suspension

EJseries

10

15

20

30

100

150

60

3

5

810

20

30

40

60

8015 60 400 800 1600 4000150

7 18 36 72 108 180 288 360 720 1080 Q(m3/h)

FEET

U.S.G.P.M.H(m)


TM


TM



Vertical In-line Closed Coupled Circulation Centrifugal Pumps

Vertically mounted, in-line suction and discharge design, allows the pump to be placed onto existing pipe line without major pipe work to boost pressure and saves space from its small foot print. Extra bearing can be added to meet heavy duty application and are optional.

Flange: DIN 2501 (std); ANSI B16.5B (optional)Materials: Cast Iron, Ductile Iron, Bronze, Stainless SteelMounting: - Closed Coupled with IEC B5 (std), NEMA ‘D’ fl ange (optional) - Extended and Stub Shaft

DN 25 - 300 Q 2 - 1080m3/hrO.P. up to 10barH 125m Ns up to 3,600rpmt -10ºC to 100ºC

Application:• Cold and Hot Water Circulation Pump• Civil and General Industrial• HVAC and Cooling Tower• Booster Pump• Fire Fighting

EILMseries

10

15

30

50

100

200

300

400

14 29 36 72 108 180 288 360 540 720

3

5

10

20

30

50

80

16015 60 100 200 400 600 800 1200 2200

Q(m3/h)

FEET

U.S.G.P.M.H(m)


TM


TM



Axial Split, Single Stage Double Suction Centrifugal Pumps

Horizontal Split casing, Single stage, Double suction impeller with in-between bearing design, allows pumps run quietly and with minimal vibration. Coupled with dynamically balanced impeller the pumps life is greatly prolonged and therefore, increase MTBF (Mean Time Between Failure).

This allows the pump to be mounted Horizontally and also, vertically to save spaces.

Flange: DIN 2501 RF (std) ANSI B16.5B (optional)Materials: Cast Iron, Ductile Iron, Stainless SteelMounting: - Bare Shaft - Engine Driven

DN 50 - 1,000 Q 18,000m3/hrO.P. up to 25barH 150m; up to 180m (optional)Ns up to 3,600rpmt up to 105ºC

Application:• HVAC and Cooling Tower• Municipal Water Supply• Marine and Ship Building• Power Plant• Irrigation and agriculture • Fire Fighting

ESCseries

Q(m3/h)

FEET

U.S.G.P.M.H(m)

100 1000 180005

10

20

30

150

20

250

450

1250

80

200

50

100

300 2000 120003000 5000200 600

50

2500 5000 10000 20000 50000


TM


TM



High Pressure Horizontal/Vertical Multistage Centrifugal Pumps

Fully Cast casing and impeller to withstand high pressure and delivering bigger flow. Hydraulically balanced flow and pressure achieved through balancing disc. The pump can be used to pump fluid with higher viscosity limited to 150cst. it can be fitted with axial inlet to combat low NPSHa

Flange: DIN 2498 (std); ANSI B16.5B (optional)Materials: GG25(Cast Iron), G-CuSn10(Bronze), Stainless SteelMounting: - Bare Shaft - Engine Driven - Closed Coupled (EMSM)

DN 32 - 200 Q 500m3/hrO.P. up to 40bar (std); 50bar (optional)H 400mNs up to 3,600rpmt -20ºC to 105ºC

Application:• Water Supply• Fire Protection and Sprinkler Installation• Boiler Feed• Irrigation and agriculture• High Pressure Pumping

EMSseries

5 100 200 60010

50

500

50

1000

2000500 1000

100

500

200

100

200

200

20

400 Q(m3/h)

FEET

U.S.G.P.M.H(m)


TM


TM



Horizontal Self-Priming Turbine Pumps

EOH are Horizontal Multistage Vane pump. Self Priming in construction and suitable to handle 2 phase fluid with up to 20% gas mixture.

This pump are used for clean fluid with small flow and high head, where normal centrifugal pumps will fail. The in-between bearing enable the pump to withstand high pressure, low noise and suitable for low NPSHa.

Flange: DIN 2512 (std); ANSI B16.5B (optional)Materials: Cast Iron, Ductile Iron, Bronze, Stainless SteelMounting: - Bare Shaft - Monobloc - Direct Coupled with Electric Motor

DN 32 - 80 Q 0.3 to 30m3/hrH 310mNs up to 1,800rpmt up to 110ºC

Application:• Boiler Feed Pump• Condensate Pump• Booster Pump• Jocky Pump• Chemical Spraying or Coating• Petro-Chemical Industry• OEM for Machinery

EOHseries

100

640

960

1140

8 16 24 320

350

300

320

200

40 80 100 120

Q(m3/h)

FEET

U.S.G.P.M.H(m)


TM


TM



Stainless Steel Bore Holes Submersible pumps

ESP range are submersible bore holes or deep well pumps and submersible up to a depth of 250m. Fully constructed in stainless steel material to withstand corrosions and erosions. Light weight, strong and robust, the pump is able to deliver the performance required in a difficult condition and site situation.

Flange: RP / NPT threaded - Female Materials: SS304 or SS316Mounting: - Horizontal or Vertical position

DN 100 - 300mm ( 4” - 12”) Q 0.3 - 120 m3/hr - 50 Hz 1 - 165 m3/hr - 60 hzO.P. 50barH up to 550m Ns up to 3,600rpmt up to 30ºC

Application:• Potable Water supply from Deep well/Bore Holes• Agriculture and Irrigations in domestic and live stock• Reverse osmosis - RO• Dewatering for Mines• Municipal supply and distribution• pressure booster• Land scaping - Fountains and Golf course irrgations.

ESPseries

10

20

40

100

60

400

600

200

80

120

60

300

600

1200

1800

240

180

0 2 4 6 8 10 20 806040 200100 Q(m3/h)

H(m)

FEET


TM


TM



Domestic Horizontal Pumps

EHS/K and ECB/S are non-self priming, horizontal multistage pumps, use in domestic water supply or portable application.

Its suitable for hot and cold liquids, even oily water that is clean and with no solid can be handled. Optional auto pressure switch can be fitted to enable pressure cut in/out to save energy and prolong the life of wear parts due to frequent start/stop, prolonging the motor life.

Flange: BSP(F) threadedMaterials: EC - SS304 with cast iron in/outlet port or Fully 304 EH - Fully SS304 or Fully SS316

DN Rp 1” to Rp 11/4” (female)Q 0.5 m3/hr - 8 m3/hrO.P. 10 bars (subject to liquid temperature)H 5 - 55m - 50Hz 6 - 76m - 60 Hz Ns 2900 rpm - 50Hz 3600 rpm - 60 Hzt 0ºC to 100ºC

Application:• Domestic Water supply and booster.• Heating and Cooling in industrial process• Cooling system in heat exchangers.• OEM for washing and dish-washing machines.• Light chemical transfer• Aqua and Horticulture.

EH/Cseries

0

10

20

40

30

60

70

50

80

0 1 2 3 4 5 6 7 8 9 Q(m3/h)

H(m)


TM


TM



Chemical Process Pumps

EISO pumps are Horizontal End Suction, single stage volute casing and designed to ISO 2858/5199. Its ‘back pull out’ design allows for maintenances without removing the piping and pumps alignments.

Flange: PN 16 (std); ANSI B16.5B (optional) PN25 or #300 RFMaterials: Cast Iron, Cast Steel, Ductile Iron, Stainless SteelMounting: - Horizontal closed impeller

DN 25 - 250 Q 3 to 1200m3/hrO.P. up to 16bar H 25 - 150m Ns up to 3,600rpmt -45ºC to 350ºC

Application:• Petrochemical & Chemical Industry• Pulp & Paper Industry• Fertilizer Industry• Food Processing• Metal & Steel Industry• Waste Water Treatment

EISOseries

160

100

60

30

10

5

3

2Q(m3/h)

FEET

U.S.G.P.M.H(m) 15 207.5 40 75 150 400 1000 2000 6000

500

300

200

100

50

30

20

10

2 41.5 10 30 100 200 300 16001000500

euroflo centrifugal product flyers 2009

Documents