external appearance catalogue covers643462637.websitehome.co.uk/.../2016/...catalogue.pdf ·...

EXTERNAL APPEARANCE CATALOGUE

Technical Datasheets

Frasers Aerospace is part of the Fraser Group, established 1885. As pioneers of International Trade and Trade Finance, we have developed an impressive sourcing network of suppliers in all industries around the globe. As well as the products we stock, Frasers Aerospace have sourced all kinds of products and materials on an 'as-needed' basis for our clients, from specialist application plastics and composites, to adhesives, lubricants and bespoke rubber seals & transport kits, to avionic components and much more. Frasers Aerospace are authorised global distributors for some of the leading names in the Aerospace Industry, including The Nuvite Chemical Corporation, American Fiber & Finishing, Micro-Surface Finishing Products, Borescopes R Us, BriskHeat Corporation, The Chemical Cloth Company and more. Our product portfolio boasts an impressive range of products, providing complete aircraft cleaning solutions and the equipment necessary for the effective and safe application of such solutions. Whether you're looking industry approved metal polishes for brightwork polishing, eco-friendly 'no need for water' dry-wash and paint polishing products, wet-washes, specialist interior shampoos and detergents, degreasers, debuggers, 'galley' cleaners, cleaning and polishing equipment, abrasion products, restoration kits or wiping products for specialist applications, composite bonding and repair equipment, Borescopes for engineering and diagnostic applications - we have the products and the know-how to assist you. The products in our portfolio are considered by most in the Aerospace Industry to be the best of their kind available. We are happy to come to your facility and demonstrate our products, equally we can provide you with free samples (with instructions and technical/safety datasheets) to allow you to experiment with them at your own convenience. We also offer in-house training, whereby we will come to your premises and train your staff in the effective use of our products and equipment, issuing certificates to everyone in attendance – our very own seal of approval. We are also approved suppliers to a number of Boeing manufacture programmes, supplying tapes, films, adhesives, greases, production materials such as carbon fiber, metal, specialist foam and prepreg materials, production materials such as rivets, nuts/bolts, approved cloths and wipes, and much, much more. If you are looking for Aerospace industry approved materials, please consider inviting us to tender for your requirements – we have over 10 year experience in sourcing and supplying these kinds of products and materials and can do so at extremely competitive prices. For more information on our products and services, or to arrange a demonstration or request samples, visit us at www.frasersaerospace.com or call us on +44(0)20 8597 8781.

ON‐SITE TRAINING

Frasers Aerospace offers a range of dedicated, specific personal training and instructional courses for various elements of Aircraft Detailing. These courses are designated ‘Pass/Fail’ and as such are not designed just for ‘attendance only’ but will re-pay careful attention and study during the training, prior to examination by a time-served instructor at the end of the training. We believe that this type of course is of much more benefit to the individual attendee and his company and thus the final certificate will have to be won, not just given. Our training courses are designed to be practical, relevant, participative and cover all of the techniques and skills required to complete a professional job, wherever you may be based. Emphasis is placed on identifying individual learning objectives in order that delegates receive maximum value from the course and take away the necessary skill-set to train other team members in the future. Our training courses consist of both theoretical knowledge and hands-on practical training. BENEFITS OF FRASERS AEROSPACE TRAINING COURSES: · ‘Professional Competency’ certification included (subject to passing

the training course) · Training in the safe use of our chemicals, equipment and machinery · Comprehensive printed materials, including in-depth theoretical

literature and usage guides · Use of equipment and materials required for training provided by

Frasers Aerospace at no extra cost · Training can be tailored to the specific task(s) that you are

undertaking (inc. working on live aircraft) · Participative training – we will observe your staff and correct

improper technique from the start · Free consultation on setting up your facility/workshop · ‘Questions and answers’ session at the cessation of training, ensuring

your staff are happy with what they’ve learnt.

Free after-sales care – call us anytime!

Training will usually begin with some classroom style theoretical and background learning – the seminar as we call it, which we find to be incredibly useful. If you want to learn how to dry-wash an aircraft for example, it’s beneficial to understand a little bit about paint – such as how/why it oxidises, how you halt the deterioration and stop it deteriorating further, how it could have been avoided/slowed in the first place, and what you can do to improve its’ current appearance – leading nicely into the use of our products.

As well as traditional methods and techniques consider the ‘Industry Standards’ we at Frasers Aerospace have developed our own processes – aimed increasing efficiency, adapting to incorporate technological advancements and ever-changing rules/regulations and adapting to the individual requirements of our clients. For example, we have improved on traditional ‘Brightwork’ polishing methods with the inclusion of market-leading cushioned abrasive technologies, which reduce man-hours and help achieve a flawless and consistent finish. So far,

everyone we have trained in our new methods have adopted them as their new ‘standard’ process. One of the benefits of participative training is that instructors can offer real-time feedback and advice, ensuring that good technique and working practises are employed right from the start. It’s also key to ensuring that the working environment is safe, and that your operation runs as efficiently as possible. If you have specific (non-standard) requirements or are working to a specification (OEM or in-house) we are happy to incorporate them into our training programme(s) to ensure that you get maximum value for money – complete customer satisfaction is one of our key objectives.

TRAINING COURSES CURRENTLY OFFERED BY FRASERS AEROSPACE ‘Brightwork’ / Aluminium Polishing - BASIC Including polishing aircraft leading edges in-situ, Airstream and retro-caravans and automotive/marine. ‘Brightwork’ / Aluminium Polishing - ADVANCED Including abrasive preparation of new aluminium (including ‘clad’) and abrasive restoration of heavily oxidised aluminium. ‘Dry-Washing’ Including the cleaning of aircraft exteriors, automotive and marine. Also covers paint restoration. Interiors Including cleaning of aircraft, automotive and marine interiors (such as leathers, wood, metals, glass and plexiglass). For more information on the training courses offered by Frasers Aerospace (including bespoke and custom training) or to obtain a quotation, please contact a Frasers Aerospace representative.

Frasers Aerospace 1 St James Road, Brentwood, Essex, CM14 4LH, United Kingdom.

Tel: +44 (0) 20 8597 8781 Fax: +44 (0)20 8597 8673 Web: www.frasersaerospace.com Email: [email protected]

Product Name AeroWash

Manufacturer Frasers Aerospace

Part Number FA02 – 5 Litre bottle

FA03 – 20 Litre bottle

Available Pack Sizes 5, 20 Litre

Qualifications Boeing D6-17487 Revision T,Airbus AIMS09-00-002

AeroWash is a concentrated preparation for removing grease, oil, dirt and hydrocarbon based material from Aircraft surfaces. The product has been formulated to cut quickly through the toughest dirt, oil and hydrocarbons on account of the wetting, penetrating, soil cutting and anti-redepositing properties of the surfactant system.

The surfactants contained in this preparation comply with the biodegradability criteria as laid down in Regulation (EC) 648/2004 on detergents.

Easily removes heavy oil and dirt deposits. Easy bug splatter removal. Effective removal of de-icing stains.

1. Dilute product appropriately, see below. 2. Spray on paying particular attention to stubborn areas and allow time to clean. Agitate if possible. 3. Wipe off with a clean towel. Can be used as a foam cleaner with suitable foam generation equipment. Dilution Rates – Drywash / Wetwash Main fuselage and above wings – 20 parts water : 1 part AeroWash. Under belly, under wings, landing gear – 10 parts water : 1 part AeroWash



Extremely dirty areas – 5 parts water: 1 part AeroWash

Irritating to eyes. Avoid contact with eyes. In case of contact with eyes, rinse immediately with plenty of water and seek immediate medical advice. Keep out of the reach of children.



Product Name NuShine II

Manufacturer Nuvite Chemical Corporation

Part Number Grade S - N001 Grade A - N002 Grade C - N003 Grade G6 - N004 Grade F7 - N005 Grade F9 - N008 Grade F10 - N017

Available Pack Sizes 1 Us Lb Container

Qualifications Douglas CSD#1, Boeing D6-17487, AMS 1650, Airbus NTO for safety to bare and clad 2024, 7075, 2524 aluminium, cadmium plated steel, mild steel, high strength steel, plexi-glass and paint.

NuShine II offers a graded system of polishes for both metal and paint finishing that will provide the finest surface finish available. NuShine II has been shown to outperform all other aviation, automotive and marine polishes in side-by-side testing by users throughout the world. Many owners of commercial and corporate jets, custom-built and ‘one of a kind’ antique show aircraft specify Nuvite NuShine II as the polish of choice for upkeep of their expensive, rare and irreplaceable aircraft. The NuShine II system of graded polishes affords the operator the choice to select the grade of polish to match the needs of the surface to be polished, be it brand new, oxidized in use, or with atmospheric corrosion. NuShine II not only polishes metals and paints and to an incredibly deep, clear and image-reflecting surface, but also imparts a protective chemical barrier to inhibit corrosive oxidation to the metal. Additionally, economy of use is preserved due to the extremely small amounts of material needed to create the required polishing action. Users continually report that NuShine II metal and paint polish simply has no peer for ease of use and successful results!

Exceptional polish, with oxidation and corrosion removal Imparts extreme clarity to aluminium, brass, copper, steel, etc. Easy and economical to use Safe to all aircraft component parts Removes spots, stains, cloudy “under cast” and orange peel Grades from heavy cut to final finish Preserves and protects substrate from further oxidation



Extreme economy through very low material use and time reduction

Unpolished Aluminium, New, lightly corroded or typically oxidized metal condition: Compound buff with NuShine II Grade G6. Buff an area 24” X 18” with circular buffer (1600-2000 rpm) and wool compounding (not std. loose wool) pad. Place wet fingerprints of polish every 3” or so. Use a small amount of polish. Buff until residue clears (45-60 seconds with proper amount of polish). Too much polish reduces effectiveness. Finish with grade S and orbital style buffer with cotton sweatshirt flannel material over the face of the pad(s) for highest image clarity.

Stainless Steel, Titanium, or Non‐clad Aluminium: Start with grade F7 (smooth surface) or F9 (for rough, or “mill” finish), repeat surface smoothing compound buffing until surface is smooth & shiny. Finish with grade S and orbital style buffer with cotton sweatshirt flannel material over the face of the pad(s) for highest image clarity and no need for additional handwork.

Finishing/Restoring Already Polished Aluminium: Use NuShine II Grade S. Put a very sparing amount of polish - merely fingerprints of polish every 6” or so, over the same size area as above. Buff as above with cotton flannel. Buffing area should clear of residue in 45-60 seconds with correct amount of polish. Watch the extreme depth and clarity of image come up! Grade C may be needed prior to final polish with grade S if light oxidation has formed.

Grading System

S - Final finish only, polish upkeep, paint finishing A - Light oxidation removal or hand polishing in tight areas C - Rain spotting & light oxidation removal, removal of cloudy look G6 - “Smart abrasive” - quick cut, but reduces to fine finish similar to “C” F7 - Polishing smooth stainless steel, blending scratches in aluminium F9 - Heavy cut, for clad or non-alclad aluminium, forged or cast parts F10 - Very heavy cut, for clad or non-alclad aluminium, forged or cast parts

NuShine II is not environmentally restricted. Users should use standard safety precautions, such as wearing gloves and eye protection along with any other standard safety procedures. Refer to Material Safety Data Sheet for further information.



Product Name NuGlaze with PFS

Manufacturer Nuvite

Part Number N205

Available Pack Sizes 1 US Gallon

Qualifications Douglas CSD #1, Boeing D6-17487, AMS 1650

Nuvite NuGlaze with PFS* is a super paint treatment, to maintain a super high gloss “show quality” finish for gelcoat or painted surfaces in new or excellent condition. The exclusive *PolyFluoro Sealant gives a hard shine surface that resists environmental effects to maintain the gloss and colour against the effects of airborne chemicals and ultraviolet radiation. NuGlaze with PFS* can also be used as a final step for maximum protection for the surface gloss and colour after using Nuvite’s NuPol or NuPower II ‘drywash’ cleaner/polishes. With regular NuGlaze with PFS* use, a surface barrier is maintained that will resist dirt staining and make the surface easy to clean. NuGlaze with PFS* is simple to use and avoids complicated setups and does not require special application/buffing equipment. Nuvite’s research has produced a breakthrough - a polyfluoro compound that will actually adhere to the paint at normal temperatures, unlike current popular coatings that require extreme temperatures for adhesion. Nuvite NuGlaze with PFS* is a technologically advanced paint treatment, and the best thing you can do to maintain and protect your new or near-new gelcoat and painted surfaces.

Adds a hard shine PolyFluoro Sealant gloss surface on painted surfaces in good to excellent condition Seals surface and leaves a protective coating against U/V and atmospheric corrosion/salt spray/pollution Can be used as a “final finish” after dry-washing with Nuvite’s NuPol and/or NuPower II Easy and fast application without power tools or special setups Safe to all aircraft components Preserves and protects substrate Easy application in all climates

For Clean, Near‐New or Excellent Condition Surfaces: Apply NuGlaze with PFS* “as-is” to clean, smooth cotton towel or flannel and spread over a small enough area to be continuously worked. Do not allow wet material to dry or to form a white haze on the surface during application procedure. Work material continuously and evenly onto surface and continue until material appears to be gone, then move to next area. Allow treated area to cure (usually no more than 5-20 minutes



depending on humidity conditions). Final buff to shine with a clean, dry, flannel detailing cloth (turn cloth frequently - lifting frequently will reposition fibers). Deep, very high gloss is possible with excellent paint.

For Normal or Lightly Soiled or Slightly “Aged” Surface Conditions: Prepare surface with Nuvite’s NuPower II drywash surface cleaner prior to application of NuGlaze with PFS*. Once surface has been cleaned with NuPower II, apply NuGlaze with PFS* as above. Contact Frasers Aerospace representatives for further information and assistance.

NuGlaze is not environmentally restricted. Users should use standard safety precautions, such as wearing gloves and eye protection along with any other standard safety procedures. Refer to Material Safety Data Sheet for further information.



Product Name NuPower II

Manufacturer Nuvite

Part Number N006 – 5 US Gallon N216 – 1 US Gallon

Available Pack Sizes 1 & 5 US Gallon

Qualifications Douglas CSD #1, Boeing D6-17487, AMS 1650AIMS 09-00-002

Nuvite’s NuPower II is an extraordinary product for ongoing care of painted or polished metal surfaces. It is easily applied with a wipe-on, wipe-off procedure with pad applicators or by hand in all types of humidity conditions. NuPower II is a hi-tech formulation that offers cleaning power, a bright shine, and a protective barrier coating against surface oxidation that also protects against ultraviolet deterioration. Because NuPower II is so easy and fast to use, it offers significant savings in labour and retains maximum appearance protection and performance in both fleet and heavy service situations.

Exceptional soil dispersion power Removes surface oxidation from paint and metal surfaces. Easy wipe on, let dry, wipe off to a clean, bright surface. Safe to all aircraft components. Adds a beautiful gloss appearance with an effective ultraviolet protectant coating on both painted and metal surfaces. Easy application in all climates. Preserves and protects substrate from further oxidation and leaves a protective coating against u/v and atmospheric corrosion/salt

spray/ pollution without colour change. Offers superior cleaning results and protection with fewer man-hours and a low material requirement.

For Normal or Lightly Soiled Surface Conditions: Apply NuPower II “as is” by hand with a soft wiping cloth, applicator pad/mop or working quickly and lightly with slow speed orbital buffer to small areas at a time. Agitate area evenly with wet material. Allow to fully dry (usually no more than 5-10 minutes even in the highest humidity conditions). Remove by wiping off with clean mop head or dry wiping cloth to reveal shine.



For Heavily Soiled Surface Conditions: For the heavy grease, oil, and hydraulic oil build-ups, it is sometimes helpful that the area be wiped down or degreased with Nuvite CitriCut or CitriCut Gel degreasing cleaners prior to the use of NuPower II, then proceed as above. For heavy dirt or carbon and fluid surface stain areas, use Nuvite NuPol to remove.

NuPower II is not environmentally restricted. Users should use standard safety precautions, such as wearing gloves and eye protection along with any other standard safety procedures. Refer to Material Safety Data Sheet for further information.



Product Name NuPol

Manufacturer Nuvite

Part Number

Available Pack Sizes 1 & 5 US Gallons

Qualifications Douglas CSD #1, Boeing D6-17487’ AMS 1650

Nuvite’s NuPol is the heavy-duty ‘Drywash’ cleaner and finish restorer for those really tough situations, such as baked-on carbon exhaust trails, surface staining, dull, dirt-catching and/or oxidised paint - anywhere in need of some serious cleaning muscle! NuPol is easy to use - just wipe or mop on with spun cotton scrub pad, agitate to a thin layer and let it dry! When you wipe off the dry haze you will see a clean, shiny and U/V-protected painted surface! No water, power tools to set up or mess – you can use it anywhere, including in hangars and on ramps. Nuvite’s NuPol can beat the toughest paint appearance problems, and when used with other Nuvite paint care products, gives you the easiest and best paint care system at the same time!

Heavy-duty ‘drywash’ cleaning Restores shine and colour on oxidized paint on all vehicles Easy “wipe on, let dry, wipe off” application procedure. Safe to all paints (not for clear-coats) Restores a beautiful gloss appearance with an effective UV protectant coating on both painted and metal surfaces Easy application in all climates Preserves and protects substrate from further oxidation and intensifies colour on oxidised paint surfaces Offers superior cleaning results and protection with fewer man-hours



For Normal or Lightly Soiled Surface Conditions: Apply NuPol “as is” by hand with a soft wiping cloth, applicator pad/mop or working quickly and lightly with slow speed orbital buffer to small areas at a time. Agitate area evenly with wet material. Allow to fully dry (usually no more than 5-10 minutes even in the highest humidity conditions). Remove by polishing off with clean mop head or dry wiping cloth to reveal shine.

For Heavily Soiled Surface Conditions: For the heavy grease, oil, and hydraulic oil build-ups, it is sometimes helpful that the area be wiped down or degreased with Nuvite CitriCut or SS-93 degreasing cleaners prior to the use of NuPol to allow the product to work without serious contamination, then proceed as above. Contact Frasers Aerospace representatives for further information and assistance.

NuPol is not environmentally restricted. Users should use standard safety precautions, such as wearing gloves and eye protection along with any other standard safety procedures. Refer to Material Safety Data Sheet for further information.



Product Name NuImage

Manufacturer Nuvite

Part Number

Available Pack Sizes 1 US Gallon

Qualifications

Nuvite’s NuImage is the answer to cleaning and oil removal problems on your show-quality polished metal! NuImage will clean and debug your outstanding polish job without the fogging of normal cleaners, and will save you time and effort while it helps you maintain that famous “Nuvite Look” you get with Nuvite NuShine II metal polishes! NuImage works great for cleaning polished skins and removing oils and fluids without the “rainbow effect” that are usually left on the surface from oil residue, and it’s easy too - put NuImage on a soft cotton flannel/cloth and apply, rubbing gently and spreading over the surface until clean. Continue over the whole surface to be cleaned/polished and when complete, buff away the slight dry haze to reveal the beautiful clear shine! NuImage even works great as a final cleanup for black metal polish residue on paint, and will help remove excess polish after power buffing.

Cleans without fogging the depth and image reflection of highly polished metal Imparts a chemical barrier against soil redeposition Safe to all aerospace components and exterior finishes Easy and fast application without power tools or special setups Economical – a little goes a long way! Easy application in all climates

NuImage is intended for use as a cleaner for well-polished metals and paints. Use Nuvite NuShine II metal polishes to polish metals. To clean polished surfaces: pour a small amount of NuImage onto a soft cotton polishing cloth (cotton flannel), and apply to surface. Wipe on gently to



avoid mechanical scratching from surface soils and dust. Spread material over the whole polished area and gently spread, rubbing until NuImage is removed. A very slight haze will remain. Allow this haze to dry as you continue with the other areas to be cleaned. After haze has been allowed to dry completely, polish away to bright shine with a clean cotton flannel polishing cloth. To remove stubborn bugs, put wet NuImage on bug spot and continue to spread material on the area around the bug while the wet NuImage soaks bug material. After a few seconds, rub away bug residue, or keep any remaining bug residue wet and soaking so that it can be removed with gentle rubbing. Continue going back over bug spot, rewetting area with NuImage wetted flannel until gone.

NuImage is not environmentally restricted. Users should use standard safety precautions, such as wearing gloves and eye protection along with any other standard safety procedures. Refer to Material Safety Data Sheet for further information.



Product Name Impact HDIII Heavy Duty Gel Degreaser

Manufacturer Nuvite

Part Number

Available Pack Sizes 1 and 5 US Gallons

Qualifications Douglas CSD#1, Boeing D6-17487, AMS 1533

Nuvite’s Impact HDIII is the answer to your tough cleaning needs. It is especially effective for removing caked-on and extremely tough built up materials, and, it works in places where you need a really heavy duty cleaner and degreaser that will not adversely affect the systems and structure being cleaned. Impact HDIII uses deep penetrating degreasing and gel-cling action to soften tar, asphalt, caked up grease and dirt, and it will clean burnt-on carbon deposits. It has superior corrosion control for all metals, including both steel and aluminium, and will not deteriorate rubber, acrylics, vinyls or paint or gelcoat surfaces. In addition, Nuvite Impact HD-III is biodegradable, safe for users, and safe for the environment as well. It is non-flammable and non combustible and contains no restricted ingredients. It rinses away completely, so it can be used wherever it is needed.

Superior cleaning action for soils, caked grease and oil, heavy sludge, tar and asphalt and burnt on carbon Safe for users and the environment Can be used as a mop on or with pressure spray/pressure rinse Rinses completely, with no residues Non-flammable, non-combustible Safe for use on all metals, plastics, rubber, gelcoat or paint Completely biodegradable Contains no restricted ingredients

Impact HD-III is recommended for the periodic cleaning of exterior aircraft surfaces, either at full strength or diluted 1:2 with water, to be determined by the extent, condition and type of soil to be removed.



For Heavy-Duty Cleaning: Use at full strength or dilute 1:2 with water, depending upon soil conditions and cleaning frequency. Apply to surfaces by spray or mop application. Agitate to loosen soil and rinse with water. Allow to soak, but do not allow to dry. Repeat agitation as needed to emulsify caked on material prior to pressure rinse.

Can be used at full strength or diluted 1:2. Can be used for ‘spot-cleaning’ prior to dry-washing with NuPol.

For details on ‘Scrub-pads’, ‘Mop-Heads’ and other suitable cleaning/wiping cloths suitable for use with this product, contact Frasers Aerospace.

Impact HDIII is not environmentally restricted. Users should use standard safety precautions, such as wearing gloves and eye protection along with any other standard safety procedures. Refer to Material Safety Data Sheet for further information.



Product Name NuGear (Double Concentrate)

Manufacturer Nuvite

Part Number

Available Pack Sizes 1 US Gallon, 5 US Gallon

Qualifications Douglas CSD #1, Boeing D6-17487

NuGear Double Concentrate is a heavy-duty exterior cleaning compound for aircraft, trucks, stationary power stations and other industrial applications. It has been specifically developed for spray wetwash applications, with superior wetting, penetration and dispersion of stubborn oil, grease and tough soil conditions commonly found on aircraft and diesel vehicles. NuGear Double Concentrate adds cleaning power over normal wet wash cleaners, and by varying the dilution, is also very versatile. It can even be used as a hand wipe-down fluid for surfaces with oil, hydraulic fluid, and other petroleum-based soil as found on the belly of an aircraft or truck trailers. NuGear Double Concentrate joins the full line of wet wash and degreasing products available from Nuvite for easy and effective appearance upkeep.

Exceptional oil and grease cleaning power Special selection of surfactants, wetting and emulsifying agents Economical heavy-duty cleaning Extremely versatile Safe to all aircraft components Contains to alkaline salts Contains no phosphates and is completely biodegradable

Easy rinsing and not affected by hard water.

For Normal Cleaning – Wet Wash: Dilute 6-10:1 with water, depending upon soil conditions and cleaning frequency. Apply to surfaces by spray, mop or foam application. Agitate to loosen soil and rinse with water.



Hand Wipedown: Dilute 10-20:1, use trigger spray bottle and spray area within reach. Agitate with cotton cloth sprayed with the same solution. Wipe clean with a dry cotton cloth.

For Heavy‐Duty Cleaning/Gear, Wheel Wells, Flaps, Cowlings: Use as-is concentrate or a 2:1 dilution depending upon soil conditions. Allow to soak 15-20 minutes. Agitate with mop or brush. Do not allow soaked area to completely dry. Rinse with water.

NuGear Double Concentrate does not contain any toxic or extremely hazardous ingredients, and is not environmentally restricted. Contains petroleum distillates. Users should use standard safety precautions, such as wearing gloves and eye protection along with any other standard safety procedures. Refer to Material Safety Data Sheet (MSDS) for further information.



Product Name Citricut

Manufacturer Nuvite

Part Number N034 (5 US Gallons) N034A (1 US Gallon)


Qualifications Douglas CSD #1, Boeing D6-17487NAMS 1526B, AMS 1527B

Nuvite’s citrus-based CitriCut provides a wide range of cleaning capabilities, yet, is both user and environmentally friendly. Nuvite’s exclusive formulation gives exceptional cleaning capabilities and ease of use, whether wetwashing, cleaning by hand or even when used as a degreaser. CitriCut can be used in a wide range of dilutions, such as for wetwashing at 1:20 dilution, or at 1:12 from a hand spray bottle for hand debugging without the need for an after rinse, so operations can be handled in place or in a maintenance bay. When used for heavy cleanup, CitriCut can be used at full concentrate strength by applying with a low pressure spray, let soak, and spray rinse clean with high pressure. All these capabilities come without worry of gelcoat/paint, acrylic or metal damage, and it is safe for users and the environment. It smells good, too!

Heavy-duty cleaner coupled with powerful, citrus-based activators that are effective for cleaning dirt, carbon, grease and oils Safe and pleasant for users and the environment Can be used as a penetrating degreaser at full strength Can be used at 1:8 – 1:20 as needed for wetwash or hand wipedown Effective and easy to use as a hand spot cleaner and debugger Carries all major certifications Completely biodegradable Contains no alkaline salts, petroleum distillates or phosphates



For Normal Cleaning – Wet Wash: Dilute 1:12-1:20 with water, depending upon soil conditions and cleaning frequency. Apply to surfaces by spray, mop or foam application. Agitate to loosen soil and rinse with water.

Wipedown/Debugging: Dilute 1:12- 1:15:, use trigger spray bottle and spray area within reach. Agitate with terry towel sprayed with the same solution, repeat to remove heavy bug soil if necessary. Wipe dry with dry terry towel. Note: in the event of product contact on formed polycarbonates, thoroughly rinse with water.

Heavy‐Duty Cleaning: Use full strength concentrate up to a 1:8 dilution depending upon soil conditions. Allow to soak 15-20 minutes. Do not allow soaked area to completely dry. Rinse with high pressure water.

CitriCut is not environmentally restricted. Users should use standard safety precautions, such as wearing gloves and eye protection along with any other standard safety procedures. Refer to Material Safety Data Sheet for further information.



Product Name Citricut Xtra

Manufacturer Nuvite

Part Number N219


Qualifications AMS 1530, Douglas CSD #1, Boeing D6-17487 AMS 1526

CitriCut Xtra, a citrus based cleaner, provides a wide range of airframe cleaning capabilities with the added benefit for fleet livery appearance. Nuvite’s exclusive formulation gives exceptional cleaning power while enhancing paint gloss factors. Whether Wetwash with rinse, Waterless Dry-Cleaning to avoid affluent runoff, or Hand Detailing to enhance gloss factors the Nuvite CitriCut Xtra deposits a thin protective sealant against resoiling and paint oxidation. CitriCut Xtra offers the versatility of being able to wetwash with up to a 1:20 dilution dependent on soil conditions. Where waterless dry cleaning is preferred a 1:10 dilution can be utilized without the need of capturing affluent rinse runoff. CitriCut Xtra when used strictly as a hand wash/wax detail through a spray bottle application, a dilution of 4:1 is recommended for cleaning with maximum deposition of surface sealant.

Heavy-duty cleaner coupled with powerful, citrus-based activators that are effective for cleaning dirt, carbon, grease and oils. • Can be used at 1:8 – 1:20 as needed for wetwash or waterless dry cleaning. • Hand Wash/Wax detailing while cleaning. • User and Environmentally friendly. • Can be used as a penetrating degreaser at full strength. • Completely biodegradable. • Wide range of airframe cleaning capabilities - extremely program versatile.



CitriCut Xtra is recommended for the periodic cleaning of exterior aircraft surfaces in dilutions determined by the extent, condition and type of soil to be removed.

Routine Cleaning – Wet Wash: Dilute 1:8-1:20 with water, depending upon soil conditions and cleaning frequency. Apply to aircraft surfaces by spray, mop or foam application. Agitate surface to loosen soils and rinse clean with water.

Dry Wash (Rinse free): Dilute 1:8-1:12 with water, depending upon soil conditions and cleaning frequency. Apply to aircraft surfaces by spray or manually with mop/pad. Agitate surface to loosen soils, then wipe dry with a clean terry towel or string mop, thus allowing sealant to dry.

Hand Wash/Wax: Use full strength concentrate, or up to a 4:1 dilution, depending upon soil conditions. Apply to aircraft surfaces by spray or manually with mophead/pad. Agitate surface with a wash pad to loosen soils. Do not allow work area to dry. Hand buff till dry with clean dry mophead or terry cloth pad.

Nuvite CitriCut Xtra does not contain toxic or extremely hazardous ingredients and is not environmentally restricted. Users should exercise routine safety procedures by wearing gloves and goggles while spraying or working with liquid chemical applications.



Product Name Citricut Gel

Manufacturer Nuvite

Part Number N027 (1 US Gallon) N027A (5 US Gallon)

Available Pack Sizes 1 and 5 US Gallon

Qualifications Douglas CSD #1, Boeing D6-17487P, AMS 1526BAMS 1527B, AMS 1533A

Nuvite’s citrus-based CitriCut Gel wetwash uses it’s fluid viscosity to cling to vertical and overhead surfaces, and it provides increased wet-out time and penetration of stubborn dirt or caked grease. CitriCut Gel extends Nuvite’s extremely popular CitriCut formulation and its exceptional cleaning capabilities to even the most difficult situations. It also allows longer wet time for all surfaces even when used with water dilution. Water dilution may still be used if needed, or, for heavy cleanup, CitriCut Gel can be used at full concentrate strength by applying with a low pressure spray, let soak, and spray rinse clean with high pressure. All these capabilities come without worry of gelcoat/paint, acrylic or metal damage, and it is safe for users and the environment. It smells good, too!

Heavy-duty cleaner and degreaser in gel form that clings to vertical and overhead surfaces. Effective for cleaning dirt, carbon, grease and oils Safe and pleasant for users and the environment Increased wet time ability allows great penetration on caked grease Will not deteriorate seals, hoses and rubber components Carries all major certifications Completely biodegradable Contains no alkaline salts, petroleum distillates or phosphates.

For Normal Cleaning – Wet Wash: Dilute 1:2-1:8 with water, depending upon soil conditions and cleaning frequency. Apply to surfaces by spray, mop or foam application. Agitate to loosen soil and rinse with water.



Vertical or overhead surfaces: Spray full strength on surface with low pressure spray. Allow to soak - CitriCut Gel will cling and penetrate soil and grease. Agitate to loosen and spray rinse with high or low pressure water. Note: in the event of product contact on formed polycarbonates, thoroughly rinse with water. Heavy‐Duty Cleaning: Use full strength concentrate, viscosity can be adjusted with liquid CitriCut if desired. Allow to soak 15-20 minutes. Do not allow soaked area to completely dry. Rinse with high pressure water.

CitriCut Gel is not environmentally restricted. Users should use standard safety precautions, such as wearing gloves and eye protection along with any other standard safety procedures. Refer to Material Safety Data Sheet for further information.



Product Name Wash Wax All Concentrate

Manufacturer Aero Cosmetics

Part Number AC01 – 5 US Gallons AC01A – 1 US Gallon


Qualifications Boeing D6-17487P (Exteriors)Boeing D6-7127M (interiors) Douglas CSD #1 AIMS 09-00-002

Wash Wax ALL Cleaner is an all-in-one ‘Waterless Wash’ cleaner for the dry washing and waxing of aircraft, removing dirt without scratching. This versatile cleaner is a biodegradable one-step cleaner and polish which also protects against UV deterioration. It’s also suitable for interior use, meaning that you can clean and protect your entire aircraft (inside and out) with a single product, eliminating the need to stock and carry a plethora of chemicals for similar applications. Simply spray on and wipe dry for an anti-static, non-stick, UV protective coating on all surfaces such as paint, glass, plastic, leather, vinyl, rubber, wood, gel coat, aluminium, granite and other hard surfaces. Works well with the ‘Aero Scrubber’ and/or terry towels for exterior applications and microfibre cloths for interior applications.

Cleans and polishes in a single pass. Extremely economical – dilutes at 10:1 with tap water. Suitable for exterior and interior use. Cleans paint, glass, plexi-glass, plastic, leather, vinyl, rubber, wood, gel coat, metals, and other hard surfaces. Protects against UV deterioration. Water-based – free from alcohol and ammonia. Can be used as a ‘waterless wash’ or ‘wax as you dry’ Biodegradable - safe for users and the environment Non-flammable and non-corrosive to all metals Hard water stable, cold water efficient Supplied in concentrated form.



Spray an area you can comfortably clean before the Wash Wax ALLdries Take the damp towel and wipe the area you just sprayed with Wash Wax ALL. (If the aircraft is not very dirty, you can skip this step.) Dry the area with a dry towel before the Wash Wax ALL dries Continue using steps 3 through 5 for the rest of the aircraft, unfolding and re-folding the towels to expose new clean sides. Work your way down to the lower portions of the aircraft. We recommend cleaning the windows last. The process is the same throughout the entire aircraft; spray on and wipe off. Replace the towels as needed when they become dirty.

For hard to reach areas, we recommend using the Wash Wax Mop For areas of the aircraft that have dried on bugs, we recommend you pre-spray the area with Wash Wax ALL (Blue) and let it soak for

10-15 minutes. After it has soaked in, re-spray the area and use the Aero Scrubber to break up the bugs. Then, use a towel to dry and clean the area before the Wash Wax ALL dries

May produce an allergic reaction. Avoid breathing product spray. The material should be handled under good housekeeping practices. Wash hands after use. Product is non-flammable, biodegradable, non-toxic and when used as directed is safe to use. For best results, store product in a cool, dry place to preserve enzyme stability. Keep away from children.



Product Name Wash Wax All Degreaser Concentrate


Part Number AC02 – 5 US Gallons AC02A – 1 US Gallon


Qualifications Boeing D6-17487P (Exteriors), Douglas CSD #1 AIMS 09-00-002

Wash Wax ALL Degreaser is a heavy-duty ‘waterless wash’ cleaner for the removal of tough grime from aircraft exteriors, such as grease, oil, hydraulic fluid and carbon stains on areas such as landing gear and bellies. It’s fully biodegradable and safe to users and the environment. Simply spray on and wipe dry – works well with the ‘Aero Scrubber’, terry towels or microfibre cloths.

Removes tough dirt and stains with a single application. Extremely economical – dilutes at 10:1 with tap water. Cleans paint, glass, plexi-glass, plastic, leather, vinyl, rubber, wood, gel coat, metals, and other hard surfaces. Leaves a protective, anti-static coating. Water-based – free from alcohol and ammonia. No need to rinse (i.e. ‘waterless’) Biodegradable - safe for users and the environment Non-flammable and non-corrosive to all metals Hard water stable, cold water efficient

Spray an area you can comfortably clean before the Wash Wax ALLdries Take the damp towel and wipe the area you just sprayed with Wash Wax ALL. (If the aircraft is not very dirty, you can skip this step.) Dry the area with a dry towel before the Wash Wax ALL dries Continue using steps 3 through 5 for the rest of the aircraft, unfolding and re-folding the towels to expose new clean sides. Work your way down to the lower portions of the aircraft. We recommend cleaning the windows last. The process is the same throughout the entire aircraft; spray on and wipe off. Replace the towels as needed when they become dirty.

For hard to reach areas, we recommend using the Wash Wax Mop



For areas of the aircraft that have dried on bugs, we recommend you pre-spray the area with Wash Wax ALL (Blue) and let it soak for 10-15 minutes. After it has soaked in, re-spray the area and use the Aero Scrubber to break up the bugs. Then, use a towel to dry and clean the area before the Wash Wax ALL dries.

May produce an allergic reaction. Avoid breathing product spray. The material should be handled under good housekeeping practices. Wash hands after use. Product is non-flammable, biodegradable, non-toxic and when used as directed is safe to use. For best results, store product in a cool, dry place to preserve enzyme stability. Keep away from children.



Product Name Wash Wax Mop System


Part Number AC05 – Wash Wax Mop AC06 – Aero Mop Pads (Pack of 4) AC07 – Bug Buster AC08 – Bug Buster Scrub Pads AC09 – Bug Buster Mop Pads ACA20 – Wet Wash Mop AC22 – Wet Wash Mop Pads (Pack of 4) AC21 – Wet Wash Mop Scrub Pads (Pack of 2) AC03 ‐ AeroScrubber

Available Pack Sizes

Qualifications

With this new revolutionary Mop you now can waterless wash and wax with the reach and leverage of an extension pole. This allows you to clean a much larger area faster while also eliminating the safety hazards associated with constantly climbing and moving a ladder. Our customers report time savings of up to 50% over waterless hand application.

Faster and Easier Washing Safer – Reduced need for Ladders Wash Anywhere – No Restrictions Conserve Water



The Wash Wax Mop was originally invented for waterless washing and waxing of aircraft. The twin, wrap around chenille microfiber pads protect the delicate surfaces. This unique patent pending design is also excellent for all types of aircraft cleaning.

The Wash Wax Mop not only saves time and water; it also saves on cleaning product. The Wash Wax Mop was designed specifically to increase the efficiency of Wash Wax ALL. That’s why our customers have reported a 30-40% reduction in Wash Wax ALL used over the traditional method of waterless hand application.

AeroScrubber 6” x 4”

WashWax Mop 15” Length

AeroMop Pads (Pack of 4) For use with WashWax Mop

Bug Buster 6” Length

Bug Buster Scrub Pads (Pack of 2)

Bug Buster Mops (Pack of 4)

Wet Wash Mop

Wet Wash Mop Pads (Pack of 4)

Wet Wash Mop Scrub Pads (Pack of 2)



Product Name PlexALL


Part Number AC011A – 1 US Gallon AC011 – 5 US Gallon

Available Pack Sizes 1 & 5 US Gallons

Qualifications Boeing D6-17487P (Exteriors), Boeing D6-7127M (interiors), AIMS 09-00-002

PlexALL is an extremely effective cleaner for all types of aircraft windows and is also safe for cockpit instruments and displays. As well as its superior cleaning capabilities, PlexALL also leaves a glossy, protective antistatic coating on both plastic and heated glass. PlexALL is supplied in both ‘Ready-to-Use’ and ‘Concentrate’ formulations, allowing for both maximum convenience and maximum cost-efficiency depending on your requirements. The Ready-to-Use formulation is supplied in 750ml spray bottles and concentrate is supplied in 1 US Gallon (3.8L) bottles and 5 US Gallon (19L) pails.

Cleans and polishes in a single pass. Extremely economical – dilutes at 10:1 with tap water. Suitable for exterior and interior use. Suitable for use on all aircraft windows. Water-based - free from alcohol and ammonia. Biodegradable - safe for users and the environment. Non-flammable and non-corrosive. Hard water stable, cold water efficient. Supplied in both ready-to-use and concentrated forms.

Take two new clean towels and fold them in half twice to make a square. Wet one with fresh water and wring it out until it is only damp.

Pre-spray the window with Plex ALL

Let it soak for 5-10 minutes.



Re-spray a section of the window you would like to clean with Plex ALL. Only spray an area you can clean before the Plex ALL dries on its own.

Wipe the area with the damp towel

Using the dry towel, thoroughly dry the area before it dries on its own

Continue using steps 3 through 5 for the rest of the pre-soaked windows, unfolding and re-folding the towels to expose new clean sides as you clean each area.

PlexAll is not environmentally restricted. Users should use standard safety precautions, such as wearing gloves and eye protection along with any other standard safety procedures. Refer to Material Safety Data Sheet for further information.



Product Name SafeSolv


Part Number AC04

Available Pack Sizes 0.5 US Gallon

Qualifications

SafeSolv is an all-purpose citrus solvent (derived from the oils of orange peels) for removing tar, oil, hydraulic fluid, adhesives and gum. It offers a safe and effective alternative to toxic chemicals that is safe to use on paint, plastic, glass, bare metal, carpet and seats.

SafeSolv is supplied in a ‘Ready-to-Use’ formulation to allow for maximum convenience.

Cleans effectively in a single pass. Suitable for exterior and interior use. Suitable for use on paint, plastic, glass, metal, most carpets and seats. Biodegradable - safe for users and the environment. Non-flammable. Hard water stable, cold water efficient. Supplied in both ready-to-use form.



Product Name Purewipe V-100

Manufacturer American Fiber and Finishing

Part Number A06A – Pack of 50 wipes A06 – Case of 1000 wipes


Qualifications BMS 15-5F (Class A) AMS 3819C (Class 2, Grade A, Form 1)

American Fiber and Finishing Inc.’s V-100 Purewipe® wiper is a 100% viscose (aka rayon) wiping solution, which conforms to AMS-3819C (Class 2, Grade A, Form 1) and BMS 15-5F (Class A). They compete directly with DuPont Sontara®, FiberWeb/Veraclean and Chicopee type products, offering an excellent quality and cost-effective wiping solution for use primarily in the Aerospace and Composite industries. Applications include: Critical cleaning and surface preparation (e.g. composite bonding, mold preparation & cleaning and sealing transparencies). Also, cleaning and polishing in a variety of applications, such as automotive cleaning, cleaning transparencies and aluminium skins, and furniture production.

• Meets and exceeds AMS 3819C and BMS 15-5F standards

• Compatible with all cleaning liquids and solvents

• No contamination from foreign matter as found in rags

• Packed in 50’s – 20 x packs (1,000 wipers) per case

• Silicone free

• Extremely low-lint

SPECIFICATIONS

• Sheet size: 12.5” x 17.75” (317.5mm x 450.9mm)

• Put up: ¼ Fold

• Packing: 50 wipers/bag, 20 bags/case

• Weight: 65g/m2



Product Name Microfibre Cloths

Manufacturer

Part Number Blue – Z338A Yellow – Z339A Green – Z340A

Available Pack Sizes Pack of 10 cloths Carton of 100 Cloths

Qualifications

Our high quality microfibre cloths. These microfiber cloths are 40 by 40 cm and of a high quality. We use these cloths in our valeting and detailing Aircraft after having them specially made for us to a high quality. We find that the size of these microfibre cloths makes them ideal for many different uses, fuselage, table tops, windows, mirrors, leather etc

Non scratch, super soft. Reusable. Durable



Product Name Buff Pro

Manufacturer Buff Pro

Part Number BFP026


Qualifications

The BuffPro Buffer is the only electrically operated drum style buffer on the market. The BuffPro uses a drum instead of a traditional rotary design. Because of its design, it has several advantages over other buffing systems:

Faster buffing and polishing. The BuffPro allows you to finish a job in half the time. Super comfortable to work. The BuffPro was designed by a professional detailer to be used all day long. No swirl marks – ever. The BuffPro drum makes it impossible to produce swirl marks.

Swirl marks are impossible with BuffPro. Traditional rotary buffers can leave swirl marks even when used carefully. It is literally impossible to make swirl marks with BuffPro. Swirl marks are produced by the rotation of a traditional buffer. But BuffPro rotates axially. This means that even a complete amateur can do a professional polishing job on any automotive, marine or aviation equipment the very first time. BuffPro is exceptionally comfortable. The ergonomic pistol grips of the BuffPro Buffer keep hand and wrist fatigue to a minimum. No more weird wrist positions required – the BuffPro was designed to be used all day long without discomfort. BuffPro can polish almost anything Any relatively flat, smooth surface can be polished using BuffPro in about half the time of traditional methods. This includes Bare metal, Painted surfaces, Stone, Plastic and Fiberglass. Multiple buffing pads are available for a variety of uses; including cutting, polishing, finishing and even sanding. BuffPro was designed by a professional detailer for other detailers. Everything about BuffPro has been designed so that professional detailers get the best shine for their customers with the least time and effort. The BuffPro uses centrifugal force to keep the polishing compound toward the outside of the pad, reducing splatters and keeping pads cleaner, longer. This cuts down on the amount of chemicals used and reduces the need for masking. The BuffPro has an electric motor, heat treated precision cut gears and a variable speed locking trigger for ease of use – even for detailers who operate mobile shops.



Foam pads (various grades) for use on paint. Wool pads (various grades) for use on aluminium.

Description Part NumberBuff Pro 220v Heavy duty electric drum polisher. Model JF180E (Plug type C European) BFP026 Heavy Cut Wool Pad for BuffPro (For Aluminium Polishing) BFP027 SLW Wool Finishing Pad for BuffPro (For Aluminium Polishing) BFP028 Power Pad for BuffPro (For Paint Polishing) BFP029 Polishing Pad for BuffPro (For Paint Polishing) BFP030



Product Name GMC 1200W Sander Polisher

Manufacturer Global Machinery CompanyPart Number BFP033Available Pack Sizes Qualifications

Powerful 1200 W motor with digital speed control for exact adjustment. Soft-start trigger and sturdy, vibration-reducing handles for improved control and user comfort. Polishes and buffs vehicle bodywork and other surfaces. Includes hook and loop backing pad and wool polishing bonnet. GMC tools are manufactured using good grade materials, modern manufacturing techniques and by incorporating the very latest in contemporary design. In short, every GMC tool is packed with innovation and at the forefront of consumer desire.

No Load Speed 1000, 1500, 2000, 2500 and 3000rpmPower 1200W Product Height 103mm Product Length 378mm Product Weight 2.4kg Product Width 75mm Sound Pressure LP 71dB(A) Sound Power LW 82dB(A) Wheel Speed 1000, 1500, 2000, 2500 and 3000rpmVariable Speed Yes



Product Name Tufted Wool Bonnet

Manufacturer Buff and Shine, USA Part Number BFP019Available Pack Sizes Qualifications

Circular buffer compounding pad as recommended in Nuvite Detailed Metal Polishing Procedures. A Compounding Pad with 7” diameter with 1” to 1 1/4" tufted wool face pile and hook & loop drive backing should be used. Works great with most popular brands of circular buffers. Use with Nuvite NuShine II compounding grades F7 & F9, G6, or C to“heal” the aluminium surface. This preps the surface to make it ready to take “The Nuvite Look” final step with a Random Orbital buffer and NuShine II grade S. Buy several, as we recommend changing pads each time you change grades for best results.



Product Name Cyclo 6CE Twin Head Buffer

Manufacturer Cyclo Tools

Part Number PC01 - Standard 6 CE PC01A - Cyclo6 CE with VES N044 – Rubber Velcro Boot N039 – Replacement Pad PC06 – Carbon Brush Set


Qualifications

Cyclo Polishers are precision machined and hand assembled for a lifetime of trouble-free operation. The Cyclo Polisher’s dual heads orbit in a random, overlapping motion that mimics fine hand polishing, and leaves a dazzling, swirl-free shine every time. The Cyclo Dual Head Orbital Polisher is one of the most effective means of polishing available, for novices and experts alike. It’s safe and easy to operate, and provides professional results every time. The difference lies in the tool’s overall balance and its patented dual heads. The dual heads operate in a synchronised motion, providing the most effective results without fear of heat build-up; damage to trim pieces, moldings and gaskets; swirl marks, holograms and more. The low-vibration and balanced design allow for a more even application and better control when operating. Frasers Aerospace also stock Cyclo accessories, including Velcro/hook and loop boots for attaching polishing pads, hard and medium-hard polishing pads, fleece-wraps for final finish polishing and more.

Robust and portable 2 x 4” (100mm) polishing heads Meets CE electrical standards Oscillating heads to mimic hand-polishing Heavy-duty, cast aluminium casing 3,000 orbits per minute VES (Vibration Elimination System) Wide range of accessories makes it suitable for use in numerous industries, including Aerospace, Automotive and Marine.



Product Name Aerobuf Twin-Head Orbital Polisher

Manufacturer Frasers Aerospace

Part Number BFP018

Available Pack Sizes N/A

Qualifications 98/37/EC2006/95/EC 2004/108/EC EN 60745-1:2006 EN 60745-2-4, A11:2007 EN 55014-1:2006 EN 55014-2, A1: 2001 EN 61000-3-2:2006 EN 61000-3-3, A2:05

The ‘Aerobuf’ Twin-Head Orbital Polisher is an extremely cost-effective solution for polishing painted and metal surfaces to high-gloss or mirror-finish shines. Its twin-heads oscillate (rather than rotating/spinning) in an overlapping motion, which simulates hand-polishing and results in a finish free of the ‘swirl marks’ left by rotary buffers/polishers. Aimed primarily at the lighter-use and hobbyist markets they cost around a third the price of industrial-use equivalents such as the Cyclo® 6CE. Perfect for infrequent ‘brightwork’ polishing jobs, or polishing your vintage caravan or classic car.

Oscillating motion to simulate hand-polishing Variable speed control for greater precision Sturdy, high-quality plastic housing Lightweight and portable High-torque motor with cooling fan Long-life carbon brushes Well-balanced, ergonomic design Compatible with Cyclo® polishing pads Fitted with a standard UK power plug (Type G / BS 1363) Suitable for use in many industries, including Aerospace, Automotive and Marine. Suitable for novices and experts alike CE Compliant Voltage/power: 230VAC/50Hz Motor output: 350W



Speed range: 1600-3500 rpm Polishing heads: 2 x ø95mm Weight: 2.6Kg

Accessories Available. Green polishing pads (Soft) Yellow polishing pads (Hard) Replacement Velcro boots Cotton fleece wraps

Refer to Material Safety Data Sheet for further information.



Product Name Cyclo Wraps

Manufacturer Frasers Aerospace Part Number N036 Available Pack Sizes Packs of 10 wraps. Each cloth is 80 x 100 cm Qualifications

100% Cotton-face, virgin cotton flannel (fleece) used with random orbital buffers, Cyclo or AeroBuff with NuShine II Grade S to get that final ‘Nuvite Look’ of extreme depth and image in your polished metal. Each cloth is pre-cut with slots to allow multiple position use with the buffers. When dirty, cloths can be washed, dried and re-used many times.

We recommend using a fleece/flannel polishing cloth to remove swirl (strike marks) and to achieve that “Champion

Class” clarity of image resolution. The consensus is that the best cloth for polishing aluminium is cotton fleece.

Basically this cloth is similar to the cotton cloth used in an expensive ski sweatshirt. Soft thin fleece on one side and

a synthetic knit on the other. Hence the term 95/5 polishing cloth represents 95% cotton and 5% backing. The

fleece side goes against the aluminium and applies the polish to the aluminium surface. Polishing cloths are made

from 13 ounce 100% cotton presents easy handling/wrapping for the Cyclo double head &/or various single head

random orbital polishers Begin using the polishing cloth by:

1. Taking a corner and pulling it up over D handle on top of Cycle.

2. Bring in the side corners to handle.

3. Then the tail of the fabric is then rolled up and wrapped around the motor housing to the front handle.

To see in detail how this is done, refer to the Use of a Random Orbital Polisher. Each cloth will provide numerous

polishing positions as shown. The cloth stays in place while you polish. You don't have to pay constant attention to

keeping the cloth properly positioned under the heads of the polisher. When clean cloth is needed it can be

brought under the polishing heads by reposition the cloth. Polishing Cloth are washable and provide added value to

your overall program. You can generally wash and reuse the cloth at least 5 times before it gets worn too thin.



Product Name Cyclo / AeroBuf Accessories

Manufacturer Cyclo Tool Makers

Part Number


Qualifications

Description Part Number

Carbon Brush Set.

Pack of 2 PC06

Cyclo Carpet Brushes. Medium

Pack of 2 BFP020

Rubber Velcro Boots for Cyclo

Pack of 2 N044

Cyclo Pad Replacement Head N039

Cyclo Green Pads – Soft

Pack of 4 GPS01

Cyclo Yellow Pads – Hard

Pack of 4 GPS02



Product Name Metal Polishing Buffing Accessories Manufacturer

Part Number


Qualifications

Description Part Number

Velcro Backing Plate 14mm Thread

Suitable for use with SiaAir / Abralon discs & Tufted Wool

Bonnet

BFP011

Tufted Wool Bonnet BFP019

Spur Rake N033

Professional Blue Masking Tape Z368

Patco Perforated Polishing Tape for Brightwork Polishing AeroTape01

external appearance catalogue covers643462637.websitehome.co.uk/.../2016/...catalogue.pdf ·...

Documents