f38_e_2009_04
TRANSCRIPT
-
8/23/2019 f38_e_2009_04
1/8
AQUAPANELCement Board Floor
F 38
Be certain,
choose AQUAPANEL
Floors on top o concrete
and timber joist construction
with AQUAPANEL
Cement Board Floor
and AQUAPANEL
Cement Board Floor MF
F381
AQUAPANELCement Board Floor
F382AQUAPANELCement Board Floor MF
F383AQUAPANELCement Board Flooron covering board
-
8/23/2019 f38_e_2009_04
2/82
AQUAPANEL Cement Board technology has already revolutionised
the design and construction o buildings world-wide. Now, the
new generation o oor systems rom Knau USG Systems providesarchitects and construction proessionals with a superior alternative to
wet screeds which can be used or all kinds o oor constructions.
AQUAPANEL Cement Board Floor has an innovative edge design with a
slot on all our sides, making installation aster and easier. Simply apply
the AQUAPANEL Slot Adhesive (PU), insert the AQUAPANEL Biscuit,
and press the panels together. No screws are required. The system is
sel-levelling during installation so oor panels create a level surace.
When used with AQUAPANEL Levelling Fill, AQUAPANEL Cement
Board Floor provides the perect oor structure. An AQUAPANEL
Cement Board Floor system is suitable or all kinds o oor
constructions, particularly or reurbishment projects.
Product description
Physical properties
AQUAPANEL AQUAPANEL
Cement Board Floor Cement Board Floor MF
Length (mm) 900 900
Width (mm) 600 600
Thickness (mm) 22 33
Weight per unit area (kg/m2) approx. 37 approx. 39
Dry density (kg/m3) approx. 1600 approx. 1600
Flexural strength (N/mm) 3.0 3.0
Modulus o elasticity (N/mm) 4000 - 7000 4000 - 7000
Water vapour permeability (DIN 4108) 70 / 150 70 / 150
Thermal conductivity (W/mK) 0.79 0.79 (0.04)
Alkalinity (pH) 12 12
Building material class A2 A2
Where suraces are level, lay AQUAPANEL Cement Board Floor MF
(laminated with impact sound insulation board) or lay AQUAPANEL
Cement Board Floor on insulation board with high compressive strength
(check suitability or dry oors). For uneven suraces, prepare a level,
load-bearing surace using AQUAPANEL Levelling Fill. Then lay covering
board, fnishing with a top layer o AQUAPANEL Cement Board Floor.
Place edge insulation strips along the walls to avoid sound bridges.
Align oor panels against the wall and install them with joints oset.
Application
AQUAPANEL Cement Board Floor
The rst cement screed without water
Durableandstablewithhighloadcapacity
Easytolay
Nodryingtimes Noscrewsrequired
Optimalsound-andthermalinsulation
Idealforallkindsofoorconstructionsincludingparquetandtiles
ater 12 hours
Canbeusedwithunderoorheating
Non-combustible
Meetsstringentregulationsforwetareas
Where necessary, cut to size using a handheld circular saw with
diamond-tipped saw blade. Beore applying the adhesive, remove dust
rom the edges o the panels using a damp brush. To lay the panels,
apply a thin bead o AQUAPANEL Slot Adhesive (PU).
Put the AQUAPANEL Biscuit into the slot and push the panels together
until the adhesive squeezes out. As soon as the AQUAPANEL Slot
Adhesive (PU) has hardened (approx. 12 hours), scrape o excess
adhesive using a putty knie or scraper and prime the entire surace with
AQUAPANEL Interior Primer. Beore gluing down the oor covering,
check that the adhesive is compatible with a cement sub-surace. For
ceramic tiles, use a exible waterproo adhesive with a suitable grout.
For gluing down parquet, ollow the manuacturers instructions.
-
8/23/2019 f38_e_2009_04
3/83
Impact sound protection
System Dimensions Impact sound reduction Certifcates
Thickness Component Totalthicknessd
ComputedvalueLw,R
Tested value
Rw,R
Values may changewith tests. Pleaseconsult technicaldepartment.
mm mm dB dB
F382 2211
AQUAPANEL Cement Board Floor / Floor MFMineral fbre insulating board
32 19 58 0231.00 - P272
F383 22820
AQUAPANEL Cement Board FloorSot fbre timber boardAQUAPANEL Levelling Fill
50 27 63 0230.00 - P272
F382 221121
AQUAPANEL Cement Board Floor / Floor MFMineral fbre insulating boardPlain woodstrip ooring
54 6 57 0007.05 - P252 / 04
F383 228
3021
AQUAPANEL Cement Board FloorSot fbre timber board
AQUAPANEL Levelling FillPlain woodstrip ooring
81 13 63 0204.00 - P272
22
11
228
30
22
11
21
22
8
30
21
System Dimensions Weight U-Value
Board dimensions Thicknessd
Rated board valueR
Board insulationR
mm mm kg/m2 W/(mK) W/(mK)
F381AQUAPANEL Cement Board Floor
600 x 900
22 37 0.79 -
F381AQUAPANEL Cement Board Floor MF
600 x 900
33 39 0.79 0.04
13 887
600
D
13
4 22
-
Dry screed fooring
Technical data / Thermal conductivity
13 887
600
D
4 33
13 12-1
-
8/23/2019 f38_e_2009_04
4/84
Installation
Characteristics
Forareaswheresuperiorimpactsoundreductionisakeyrequirement
Forreprotection:BuildingmaterialclassA2
ForprenishedandmosaicparquetForlayingoatingparquetoors
ForPVC,linoleum,carpet
Fortilesupto33x33cm/forlargersizes,pleaseconsulttechnical
department
Incombinationwithunderoorheatingsystemswithsupply
temperature up to 70C.
Surace
Prime surace with AQUAPANEL Interior Primer
(consumption approx. 50g/m2,diluted1:1withwater)
Connection
AQUAPANEL Biscuit, AQUAPANEL Slot Adhesive (PU)
Details Scale 1:5
13 887
600
22
AQUAPANEL Biscuit
AQUAPANEL Slot Adhesive (PU)applied with a flat nozzle
Detail of groove edge
AQUAPANELBiscuit
13
94
1
26
The groove edge does not have to be cut off in the wall area
-
8/23/2019 f38_e_2009_04
5/85
Vertical sections
Details Scale 1:5
F382-V5 Height compensation through levelling lling
F381-V3 Edge design in wet rooms
F382-V1 Edge design on a reinorced concrete ceiling
F382-V6 Floor on stopper
F382-V4 Installation on timber foor boards
F382-V7 Door sill area F382-V8 Piping in levelling lling
Note:
Compacting loose fll on top o mineral fbre insulating board is only recommended up to 60 mm. Compacting up to 60 mm can be done by walking
pressure. For heights o 60
-
8/23/2019 f38_e_2009_04
6/86
Installation can beginin either the left or rightcorner of the room
= Installation direction
Lining
//
Mechanical load capacity
Layer composition Area load Concentrated load(4 x 4 cm)
Material kN /m2 kN
33 AQUAPANEL Cement Board Floor MF Mineral fbre *) 3 3
22 AQUAPANEL Cement Board Floor Covering board **)(sot fbre timber board,gypsum board)
3 3
22 AQUAPANEL Cement Board Floor Covering boardAQUAPANEL Levelling Fill 60 mm
3 3
22 AQUAPANEL Cement Board Floor AQUAPANEL Cement Board IndoorCovering boardAQUAPANEL Levelling Fill 60 mm
4 4
*) When using a mineral fbre insulating board with AQUAPANEL Cement Board Floor, check suitability with the manuacturer.
**) Covering boards such as gypsum boards or sot fbre timber boards are to be chosen in accordance with DIN EN 520 or DIN EN 13171.
Laying and processing on a separating layer/insulating layer, on AQUAPANELLevelling Fill
Edges o the boards do not have to be cut o.
Elements can be laid immediately.
Note:
Laying on a separating layer / insulating layer
Start laying at the wall opposite the door. The elements can be laid
continuously within door area. Line element joints in the door area.
Installation on loose fll:
Installation is always carried out with a covering board such as sot fbre
timber, gypsum board or similar
Installation plan / Load-bearing capacity
-
8/23/2019 f38_e_2009_04
7/87
Material consumption
Quantity per m2
Building materials printed in italics are not Knau USG Systems products
Average consumption
Unit F381 F382
Edge insulation strip with 10 mm mineral fbre or similar,depending on room perimeter
AQUAPANEL Cement Board Floor, covered area 600 x 900, d = 22 mm m2/board 0.54 0.54
AQUAPANEL Cement Board Floor MF, covered area 600 x 900, d = 33 mm m2/board 0.54 0.54
PE oil m2 1.20 1.20
AQUAPANEL Slot Adhesive (PU), cartridge 310 ml ml 60 60
AQUAPANEL Slot Adhesive (PU), sausage 600 ml ml 60 60
AQUAPANEL Biscuit piece 7 7
AQUAPANEL Levelling Fill l 11 11
AQUAPANEL Levelling Compound kg/m2 per mmlayer thickness
1.5 1.5
AQUAPANEL Interior Primer g 50 50
Depth o fll
60 mm > 60 mm
Floor plan and boundary conditions Simple Difcult Simple Difcult
Fill plus cover board
3.5
7.0 min/m2
5.8
10.5 min/m2
Fill, cover board plus AQUAPANEL Cement Board Floor 11.0 18.0 min/m2 13.0 23.0 min/m2
Note:
Please consult the local partner organisation o Knau USG Systems or more inormation on country-specifc building requirements and legislation.
Technical advice is based on standard criteria.
-
8/23/2019 f38_e_2009_04
8/8
Knau USG Systems GmbH & Co. KGZur Helle 1158638 Iserlohn, Germanywww.aquapanel.com
AQUAPANEL is a registered trademark o Knau USG Systems GmbH & Co. KG
Knau USG Systems GmbH & Co. KG reserves the right to change speciicationsor design and supply products which may dier rom those described and illustratedwithout notice and without liability. All weights and measures are nominal. 2009 GB 04/09