fall protection systems / ladders
DESCRIPTION
Cresto Fall Protection SolutionsTRANSCRIPT
Fall Protection Systems / Ladders
1 DATASHEET
Ref. no. 200202 - < Segment Length>
Material St-tZn (1.0037)
Weight 4,6 kg/m
Description Ladder with central integrated Fall Protection Rail
incl. connection plate and screws
To be used with Monostop and Twinstop®
Step height 280mm
Step wide per side 150mm
Step surface punched, anti slide
Step shape ergonomic
Slip protection left and right, 24mm height
Centre Rail 50 x 32mm
Locking notch interval 140mm
Total width 386mm
Total depth 50mm
Segment Length 2800mm standard
Segments also available in steps of 280mm
Max. length 4760mm
Mounting Interval Max.1540mm, recommended 1260mm
max. 315mm stand over without reinforcement
Max. 1450 stand over with reinforcement
Method of Fixation Depending from the material, construction and situation at site
Adaptation Positive and negative curving, min. radius 1000mm
Extras all confi rmed accessories
I-Type Laddergalvanized steel Short Code: IST
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
1-1
1 DATASHEET
I-Type- Ladderpickled stainless steelShort Code: IA4
Ref. no. 200204 - < Segment Length>
Material pickled stainless steel (AISI 316)
Weight 4,6 kg/m
Description Ladder with central integrated Fall Protection Rail
incl. connection plate and screws
To be used with Monostop and Twinstop®
Step height 280mm
Step wide per side 150mm
Step surface punched, anti slide
Step shape ergonomic
Slip protection left and right, 24mm height
Centre Rail 50 x 32mm
Locking notch interval 140mm
Total width 386mm
Total depth 50mm
Segment Length 2800mm standard
Segments also available in steps of 280mm
Max. length 4760mm
Mounting Interval Max.1540mm, recommended 1260mm
max. 315mm stand over without reinforcement
Max. 1450 stand over with reinforcement
Method of Fixation Depending from the material, construction and situation at site
Adaptation Positive and negative curving, min. radius 1000mm
Extras all confi rmed accessories
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
1-2E-Mail: offi [email protected] | Internet: www.cresto.se
1 DATASHEET
I-Type-Ladderanodised AluminiumShort Code: IAL
Ref. No. on demand
Material Aluminium anodised (3.3206)
Weight 3,4 kg/m
Description Ladder with central integrated Fall Protection Rail
incl. connection plate and screws
To be used with Monostop and Twinstop®
Step height 280mm
Step wide per side 150mm
Step surface fl uted, anti slide
Step shape ergonomic
Slip protection left and right, 24mm height
Centre Rail 52 x 51mm
Locking notch interval 140mm
Total width 392mm
Total depth 51mm
Segment Length 2800mm standard
Segments also available in steps of 280mm
Max. length 4760mm
Mounting Interval Max.1680mm, recommended 1400mm
max. 380mm stand over without reinforcement
Max. 1500 stand over with reinforcement
Method of Fixation Depending from the material, construction and situation at site
Adaptation Positive and negative curving, min. radius 3000mm
Extras all confi rmed accessories
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
1-3
1 DATASHEET
D
C
E
A
A
A
B
max 20°
C
C
max 20°
max 20°
max 20°
F
B
I-Type-LadderI-Curving
Description Adapting the ladder segments to changing construction outlines
Specification Aid below listed parameters need to be given at any order
Curving Radius galvanised / stainless steel min 1000mm
Curving No 1 Curving No 4
Curving No 5Curving No 2
Curving No 3
on IST
900011-MHST
on IA4
900011-MHVA
on IST
900014-MHST
on IA4
900014-MHVA
on IST
900015-MHST
on IA4
900015-MHVA
on IST
900012-MHST
on IA4
900012-MHVA
on IST
900013-MHST
on IA4
900013-MHVA
Parameters
A[mm] = Segment bottom end to curving edge of the construction
B[°] = Angle of the construction
C[mm] = offset of the segment
D(mm) = Segment bottom end to centre of the construction barrier
E[mm] = length of the barrier
F[mm] = Segment Top End to curving edge of the construction
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifica
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: [email protected] | Internet: www.cresto.se
1-4E-Mail: [email protected] | Internet: www.cresto.se
2 DATASHEET
H-Type Laddergalvanized steel Short Code: HST
Ref. No. 200200 - < Segment Length>
Material St-tZn (1.0037)
Weight 6,8 kg/m
Description Ladder with central integrated Fall Protection Rail
incl. connection plate and screws
To be used with Monostop and Twinstop®
Step height 280mm
Step wide per side 150mm
Step surface punched, anti slide
Step shape ergonomic
Side Rungs Tube d=27mm, plug type
Centre Rail 50 x 32mm
Locking notch interval 140mm
Total width 405mm
Total depth 50mm
Segment Length 2800mm standard
Segments also available in steps of 280mm
Max. length 4760mm
Mounting Interval Max.1540mm, recommended 1260mm
max. 315mm stand over without reinforcement
Max. 1450mm stand over with reinforcement
Method of Fixation Depending from the material, construction and situation at site
Adaptation Positive and negative curving, min. radius 1000mm
Extras all confi rmed accessories
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
2-1
2 DATASHEET
H-Type Ladderpickled stainless steelShort Code: HA4
Ref. No. 200190 - < Segment Length>
Material pickled stainless steel (AISI 316)
Weight 6,8 kg/m
Description Ladder with central integrated Fall Protection Rail
incl. connection plate and screws
To be used with Monostop and Twinstop®
Step height 280mm
Step wide per side 150mm
Step surface punched, anti slide
Step shape ergonomic
Side Rungs Tube d=27mm, plug type
Centre Rail 50 x 32mm
Locking notch interval 140mm
Total width 405mm
Total depth 50mm
Segment Length 2800mm standard
Segments also available in steps of 280mm
Max. length 4760mm
Mounting Interval Max.1540mm, recommended 1260mm
max. 315mm stand over without reinforcement
Max. 1450mm stand over with reinforcement
Method of Fixation Depending from the material, construction and situation at site
Adaptation Positive and negative curving, min. radius 1000mm
Extras all confi rmed accessories
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
2-2E-Mail: offi [email protected] | Internet: www.cresto.se
2 DATASHEET
H-Type-Ladderanodised AluminiumShort Code: HAL
Ref. No. on demand
Material Aluminium anodised (3.3206)
Weight 4,3 kg/m
Description Ladder with central integrated Fall Protection Rail
incl. connection plate and screws
To be used with Monostop and Twinstop®
Step height 280mm
Step wide per side 150mm
Step surface fl uted, anti slide
Step shape ergonomic
Side Rungs 30x12mm Clamp Connected
Centre Rail 52 x 51mm
Locking notch interval 140mm
Total width 399mm
Total depth 51mm
Segment Length 2800mm standard
Segments also available in steps of 280mm
Max. length 4760mm
Mounting Interval Max.1680mm, recommended 1400mm
max. 380mm stand over without reinforcement
Max. 1500mm stand over with reinforcement
Method of Fixation Depending from the material, construction and situation at site
Adaptation Positive and negative curving, min. radius 3000mm
Extras all confi rmed accessories
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
2-3
3 DATASHEET
Guide Rail - Vertical Short Code: GRV – ST
Ref. No. 200178 - < Segment Length>
Material St-tZn (1.0037)
Weight 2,9 kg/m
Description Ladder with central integrated Fall Protection Rail
incl. connection plate and screws
To be used with Monostop and Twinstop®
Centre Rail 50 x 32mm
Locking notch interval 140mm
Segment Length 2800mm standard
Segments also available in steps of 280mm
Max. length 4760mm
Mounting Interval Max.1540mm, recommended 1260mm
max. 315mm stand over without reinforcement
Max. 1450mm stand over with reinforcement
Method of Fixation Depending from the material, construction and situation at site
Adaptation Positive and negative curving, min. radius 1000mm
Extras all confi rmed accessories
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
3-1
3 DATASHEET
Guide Rail - Vertical Short Code: GRV – A4
Ref. No. 200180 - < Segment Length>
Material pickled stainless steel (AISI 316)
Weight 2,9 kg/m
Description Ladder with central integrated Fall Protection Rail
incl. connection plate and screws
To be used with Monostop and Twinstop®
Centre Rail 50 x 32mm
Locking notch interval 140mm
Segment Length 2800mm standard
Segments also available in steps of 280mm
Max. length 4760mm
Mounting Interval Max.1540mm, recommended 1260mm
max. 315mm stand over without reinforcement
Max. 1450mm stand over with reinforcement
Method of Fixation Depending from the material, construction and situation at site
Adaptation Positive and negative curving, min. radius 1000mm
Extras all confi rmed accessories
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
3-2E-Mail: offi [email protected] | Internet: www.cresto.se
3 DATASHEET
Guide Rail - Vertical Short Code: GRV – AL
Ref. No. 200124 - < Segment Length>
Material anodised aluminium (3.3206)
Weight 1,6 kg/m
Description Ladder with central integrated Fall Protection Rail
incl. connection plate and screws
To be used with Monostop and Twinstop®
Centre Rail 50 x 33mm
Locking notch interval 150mm
Segment Length 3000mm standard
Segments also available in steps of 300mm
Max. length 6000mm
Mounting Interval Max.1540mm, recommended 1260mm
max. 315mm stand over without reinforcement
Max. 1450mm stand over with reinforcement
Method of Fixation Depending from the material, construction and situation at site
Adaptation Positive and negative curving, min. radius 2250mm
Extras all confi rmed accessories
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
3-3
3 DATASHEET
D
C
E
A
A
A
B
B
max 20°
C
C
max 20°
max 20°
max 20°
F
Guide Rail - VerticalGRV-Curving
Description Adapting the ladder segments to changing construction outlines
Specification Aid below listed parameters need to be given at any order
Curving Radius galvanized / stainless steel min 1000, Aluminium min 2250mm
Curving No 1 Curving No 4
Curving No 2 Curving No 5
Curving No 3
on GRVST
900011-FVST
on GRVA4
900011-FVVA
on GRVAL
900011-FVAL
on GRVST
900014-FVST
on GRVA4
900014-FVVA
on GRVAL
900014-FVAL
on GRVST
900012-FVST
on GRVA4
900012-FVVA
für FV-AL
900012-FVAL
on GRVST
900015-FVST
on GRVA4
900015-FVVA
on GRVAL
900015-FVAL
on GRVST
900013-FVST
on GRVA4
900013-FVVA
on GRVAL
900013-FVAL
Parameters
A[mm] = Segment bottom end to curving edge
of the construction
B[°] = Angle of the construction
C[mm] = offset of the segment
D(mm) = Segment bottom end to centre
of the construction barrier
E[mm] = length of the barrier
F[mm] = Segment Top End to curving edge
of the construction © C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifica
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: [email protected] | Internet: www.cresto.se
3-4E-Mail: [email protected] | Internet: www.cresto.se
4 DATASHEET
Guide Rail - Horizontalgalvanized SteelShort Code: GRH - ST
Ref. No. 200290 - <Segment Length>
Material St-tZn (1.0037)
Weight 3,1 kg/m
Description Guide Rail, incl. Connection plates and screws.
horizontal applications only
centre rail 50x32mm
Locking notch interval none
Segment Length 2800mm standard
Segments also available in steps of 140mm
Max length 4760mm
Mounting hole none
Mounting Interval Max. 1000mm, material and strength of the constructions has to be considered
Method of Fixation Depending from the material, construction and situation at site
Adaptation positive and negative curving, min radius 600mm
Extras all confi rmed accessories
Ref. No. 900003
Pre-manufactured in 1000mm distancepunching
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
4-1
Short Code: GRH - ST
St-tZn (1.0037)
3,1 kg/m
200290 - <Segment Length>
4 DATASHEET
Guide Rail - Horizontalgalvanized SteelShort Code: GRH – A4
Ref. No. 200291 - <Segment Length>
Material pickled stainless steel (AISI 316)
Weight 3,1 kg/m
Description Guide Rail, incl. Connection plates and screws.
horizontal applications only
centre rail 50x32mm
Locking notch interval none
Segment Length 2800mm standard
Segments also available in steps of 140mm
Max length 4760mm
Mounting hole none
Mounting Interval Max. 1000mm, material and strength of the constructions has to be considered
Method of Fixation Depending from the material, construction and situation at site
Adaptation positive and negative curving, min radius 600mm
Extras all confi rmed accessories
Ref. No. 900003
Pre-manufactured in 1000mm distancepunching
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
4-2E-Mail: offi [email protected] | Internet: www.cresto.se
Short Code: GRH – A4
pickled stainless steel (AISI 316)
3,1 kg/m
200291 - <Segment Length>
4 DATASHEET
Guide Rail - HorizontalAluminium anodisedShort Code: GRH - AL
Ref. No. 200292 - <Segment Length>
Material Aluminium anodised (3.3206)
Weight 1,7 kg/m
Description Guide Rail, incl. Connection plates and screws.
horizontal applications only
centre rail 52x33mm
Locking notch interval none
Segment Length 3000mm standard
Segments also available in steps of 150mm
Max length 6000mm
Mounting hole none
Mounting Interval Max. 1000mm, material and strength of the constructions has to be considered
Method of Fixation Depending from the material, construction and situation at site
Adaptation positive and negative curving, min radius 1000mm
Extras all confi rmed accessories
Ref. No. 900003
Pre-manufactured in 1000mm distancepunching
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
4-3
Short Code: GRH - AL
Aluminium anodised (3.3206)
1,7 kg/m
200292 - <Segment Length>
4 DATASHEET
Guide Rail - HorizontalGRH-Curving
Description Adapting the ladder segments to construction outlines
Specifi cation Aid below listed parameters need to be given at any order
Curving Radius min 600mm
Ref. No. on GRHST 900016-FHST
Ref. No. on GRHA4 900016-FHVA
Ref. No. on GRHAL 900016-FHAL
Curving
Parameter
Ra[mm] = Outer Radius
Ri[mm] = Inner Radius
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
4-4E-Mail: offi [email protected] | Internet: www.cresto.se
RaR
i
5 DATASHEET
Ref. No 200216
Material St-tZn (1.0037 hot dipped
galvanized)
Weight 0,6 kg
Specifi cation 3 mounting holes,
Safety Clip
Ref. No 200211
Material anodised aluminium
(3.3206)
Weight 0,4 kg
Specifi cation 2 mounting holes
Ref. No 200214
Material pickled stainless
steel (AISI 316)
Weight 0,6 kg
Specifi cation 3 mounting holes,
Safety Clip
Ref. No 200213
Material pickled stainless
steel (AISI 316)
Weight 0,9 kg
Specifi cation 3 mounting holes
Guide Rail galvanized steel St-tZn, incl. screws
Guide Rail anodised aluminium, incl. screws
Guide Rail stainless steel, incl. screws
Guide Rail anodised aluminium, incl. screws
Connection Plates Short Code: CONN Description Joint Plate for Fall Protection Guide Rail
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
5-1
6 DATASHEET
Bottom End-Stops(can be opened)Short Code: ESB-O
Ref. No. 200227
Material pickled stainless steel (AISI 316)
Weight 0,5 kg
Description Prevents unintended release from the guide Rail as well as inserting
the shuttle up side down. Break Load 12kN (applies to New
Standard)
Bottom End-Stop (can be opened) including screw
Ref. No. 200193
Material pickled stainless steel (AISI 316)
Weight 0,2 kg
Description Prevents unintended release from the guide Rail as well as inserting
the shuttle up side down.
Bottom End-Stop (can be opened) including screw
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
6-1
Prevents unintended release from the guide Rail as well as inserting Prevents unintended release from the guide Rail as well as inserting
6 DATASHEET
Top End-Stops (can be opened)Short Code: EST-O
Ref. No. 200230
Material pickled stainless steel (AISI 316)
Weight 0,5 kg
Description Prevents unintended release from the guide rail
as well inserting the shuttle up side down.
Break Load 12kN (applies to New Standard)
Top End-Stops(can be opened) inclusive screw
Ref. No. 200195
Material pickled stainless steel (AISI 316)
Weight 0,2 kg
Description Prevents unintended release from the guide rail as well inserting the
shuttle up side down.
Top End-Stop (can be opened) inclusive screw
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
6-2E-Mail: offi [email protected] | Internet: www.cresto.se
6 DATASHEET
End-Stop - RigidShort Code: ES-R
End-Stop - Rigid aluminium inclusive screw
Description Prevents unintended release from the guide Rail. Break Load
12kN (applies to New Standard)
Ref. No. 200197
Material anodised aluminium
(3.3206)
Weight 0,2 kg
End-Stop - Rigid stainless steel inclusive screw
Ref. No. 200285
Material pickled stainless steel (AISI 316)
Weight 0,5 kg
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
6-3
7 DATASHEET
Rail Opening Short Code: -OPEN
Ref. No. 200231
Material ---
Weight 0,0kg
Opening Approx. 42x150mm
Position Standard 700mm from bottom end of the rail, other positions on request
Description The Rail Opening is made for inserting / removing the shuttle in /
from the Fall Protection Ladders. Bottom End-Stops
have to be placed above the Rail Opening.
The rail opening can only be used up to a maximum of 1m above safe ground
(ground fl oor level or platforms with railing). In any other case, exit sections have to
be used (see 7-2 and 7-3)
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
7-1
Standard 700mm from bottom end of the rail, other positions on request
The Rail Opening is made for inserting / removing the shuttle in /
The rail opening can only be used up to a maximum of 1m above safe ground
7 DATASHEET
For Fall Protection Guide Rail made ofgalvanized steel and aluminium
Exit Section For Fall Protection Guide Rail Short Code: EXS-GR
Step Distance Min. 250mm
Mounting Point In order to ensure max. safety, the guide rail has to be fi xed at
the step right above and below the exit section
Position Approx. 1000mm above exit / entering platform
Description The exit section provides a secured entering and exiting location
on the Fall Protection guide rail (on working platforms for
example). An installation aid is included
Ref. No. 200181
Material anodised aluminium (3.3206) and
pickled stainless steel (AISI 316)
Weight 1,2 kg
For Fall Protection Guide Rail made ofstainless steel
Ref. No. 200222
Material pickled stainless steel (AISI 316)
Weight 1,3 kg
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
7-2E-Mail: offi [email protected] | Internet: www.cresto.se
7 DATASHEET
For I / H-Type ladder made of galvanized steel
Exit Section For I / H-Type LaddersShort Code: EXS-L
Step Distance Min. 280mm
Position Approx. 1000mm above exit / entering platform
Description The exit section provides a secured entering and exiting location
on the Fall Protection guide rail (on working platforms for
example).An installation aid is included
Ref. No. 200221
Material anodised aluminium (3.3206) and
pickled stainless steel (AISI 316)
Weight 1,8 kg
For I / H- Type ladder made of stainless steel
Ref. No. 200223
Material pickled stainless steel (AISI 316)
Weight 1,9 kg
Pre-assembled with a ladder section
Ref. No. 900000
Note Please advise mounting position when
ordering
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
7-3
For I / H-Type Ladders
The exit section provides a secured entering and exiting location
on the Fall Protection guide rail (on working platforms for
7 DATASHEET
Rotary Exit Section For I / H- Type Ladders Short Code: REXS
Version stainless steel (AISI 316) incl. Screws
Mounting Point Centre Rail / construction
Description The exit section provides a secured transfer on roofs and platforms
opposite the ladder. Turns 360°
Ref. No. 200234
Weight 13,8 kg
Version stainless steel (AISI 316) with Footrest galvanized steel incl. Screws
Ref. No. 200235
Weight 18,6 kg
Pre-assembled with a ladder section
Ref. No 900001
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
7-4E-Mail: offi [email protected] | Internet: www.cresto.se
For I / H- Type Ladders
The exit section provides a secured transfer on roofs and platforms The exit section provides a secured transfer on roofs and platforms
8 DATASHEET
Reinforcement Short Code: RIF
Version galvanized steel St-tZn 50x30x3 incl. Screws
Limits Max. 1500mm from the last mount.
Mounting Point At a minimum, the reinforcement must be mounted at the two
previous brackets, and needs to be a min. of 1120mm longer than
the stand-over. Reinforcements need to be mounted to the guide rail
every 560mm throughout the entire length
Description The reinforcement provides a free stand-over of the guide rail in
order to extend the rail at the top of a building or to bridge over
longer anchorage distances
Ref. No. 200241 - <length>
Material St-tZn (1.0037 hot dipped galvanized)
Weight 3,5 kg / m
Version stainless steel 50x30x3 incl. Screws
Ref. No. 200242 - <length>
Material pickled stainless steel (AISI 316)
Weight 3,5 kg / m
Version Aluminium 50x50x3 comes with bolts and nuts
Ref. No. 200243 - <length>
Material anodised aluminium (3.3206)
Weight 2,0 kg / m
E-Mail: [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifica
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: [email protected] | Internet: www.cresto.se
8-1
9 DATASHEET
Pre-assembled with a ladder Section
Ref. No. 900002
Note Please advise mounting position when
order
Version aluminium and stainless steel incl. Screws and Stopper
Ref. No. 200256
Material anodised aluminium (3.3206) and
stainless steel (AISI 316)
Weight 5,4 kg
Version stainless steel incl. Screws and Stopper
Ref. No. 200257
Material pickled stainless steel (AISI 316)
Weight 5,4 kg
Turntable Short Code: TT
Mounting Point Guide Rail
Position Approx. 1000mm above platform or stage
Description Provides changing direction from vertical to horizontal without
disconnecting from the guide rail. Four legs
provide access left / right, up / down. Locking bar for free ends are
included
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
9-1
Approx. 1000mm above platform or stage
Provides changing direction from vertical to horizontal without
disconnecting from the guide rail. Four legs
provide access left / right, up / down. Locking bar for free ends are
9 DATASHEET
Transfer Rail Short Code: TR
Version galvanized steel St-tZn incl. Screws, Connecting Plates and openable Top End-Stop
Mounting Point Guide Rail and support strut (see 9-3)
Direction Right
Accessory Support to the intermediate attachment on the horizontal transfer
surface is recommended
Description Provides changing direction from vertical to horizontal when stepping
onto a roof top, without disconnecting from the guide rail.
Ref. No. 200238
Material St-tZn (1.0037 hot dipped galvanized)
Weight 10,5 kg
Version stainless steel incl. Screws, Connecting Plates and Top End-Stop (can be opened)
Ref. No. 200239
Material pickled stainless steel (AISI 316)
Weight 10,5 kg
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
9-2E-Mail: offi [email protected] | Internet: www.cresto.se
Transfer Rail Short Code: TR
Guide Rail and support strut (see 9-3)
Right
Support to the intermediate attachment on the horizontal transfer
surface is recommended
Provides changing direction from vertical to horizontal when stepping
onto a roof top, without disconnecting from the guide rail.
9 DATASHEET
Support Post Short Code: SP
Ref. No. 200240 - <height>
Material St-tZn (1.0037 hot dipped galvanized)
Weight 14,0 kg
Height max. 1400mm, need to be precisely mentioned
Fixation Guide Rail / Rooftop
Description Fixation element to stabilize the end
of the Transfer Rail
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
9-3
10 DATASHEET
Description Provides an ergonomic access to shafts or in situation where the ladder
ends exactly at the level of and platform, roof, ceiling, etc. where a
permanent stand over is not possible. The Entering Device is connected
with a coupling fi xed to the installed ladder. It is portable and can be used
at several sites.
Version galvanized steel St-tZn
Ref. No. 200260
Material stainless steel pickled (AISI 316)
Weight 7,5 kg
Version stainless steel
Ref. No. 200232
Material stainless steel pickled (AISI 316)
Weight 7,5 kg
Shaft Entering DeviceEnd-Stop included(can be opened)Short Code: SED
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
10-1
Provides an ergonomic access to shafts or in situation where the ladder
ends exactly at the level of and platform, roof, ceiling, etc. where a
permanent stand over is not possible. The Entering Device is connected
with a coupling fi xed to the installed ladder. It is portable and can be used
Version stainless steel
Provides an ergonomic access to shafts or in situation where the ladder
ends exactly at the level of and platform, roof, ceiling, etc. where a
permanent stand over is not possible. The Entering Device is connected
with a coupling fi xed to the installed ladder. It is portable and can be used
Version stainless steel
10 DATASHEET
Coupling for Shaft Entering DeviceSED-CON
Mounting Point Centre Rail
Description Mount and arrest the Shaft Entering Device
Specifi cation Aid clamps on side 10-3 and 10-4
Version galvanized steel St-tZn incl. Screws
Ref. No. 200261
material stainless Steel pickled (AISI 316)
Weight 1,3 kg
Version stainless steel incl. Screws
Ref. No. 200233
material St-tZn(1.0037 hot dipped galvanized)
Weight 1,3 kg
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
10-2E-Mail: offi [email protected] | Internet: www.cresto.se
10 DATASHEET
Fixation Clamp
Extension fi t to 160mm, other extensions on demand
Description The fi xation clamp is made to fi x the I- / H-Type ladder inclusively
with the adapter to the construction at the top end
Version galvanized Steel, incl. Screws
Ref. No. 200293 - <extension>
material St-tZn(1.0037 hot dipped galvanized)
Weight from 1,8 kg
Version stainless Steel, incl. Screws
Ref. No. 200294 - <extension>
material stainless Steel pickled (AISI 316)
Weight from 1,8 kg
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
10-3
The fi xation clamp is made to fi x the I- / H-Type ladder inclusively The fi xation clamp is made to fi x the I- / H-Type ladder inclusively The fi xation clamp is made to fi x the I- / H-Type ladder inclusively
10 DATASHEET
Rung Clamp incl. Screws, for rectangular rungs 30mm
Ref. No. 200264
Material Stainless Steel pickled (AISI 316)
Weight 0,5 kg
Description The fi xation clamp is made to fi x guide rails on the very top rung of
existing ladders when using an adapter for shaft entering devices
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
10-4E-Mail: offi [email protected] | Internet: www.cresto.se
Rung Clamp incl. Screws,
The fi xation clamp is made to fi x guide rails on the very top rung of
Rung Clamp incl. Screws,
The fi xation clamp is made to fi x guide rails on the very top rung of
11 DATASHEET
Version galvanized steel St-tZn incl. Screws
Folding Footrest Short Code: FR-F
Tread 2x130x300mm
Mounting Point Centre Rail
Description Footrest with two separate pivoting steps. In accordance to
German work directive BG 74 Footrests are requested every
10m
Ref. No. 200167
Material St-tZn (1.0037 hot dipped galvanized)
Weight 5,8 kg
Version stainless steel incl. Screws
Ref. No. 200218
Material pickled stainless steel (AISI 316)
Weight 5,8 kg
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
11-1
Footrest with two separate pivoting steps. In accordance to Footrest with two separate pivoting steps. In accordance to
11 DATASHEET
Version galvanized steel St-tZn incl. Screws
Rigid Working PlatformShort Code: WP-R
Tread 300 x 400mm
Mounting Point Centre Rail
Description Working Platform
Ref. No. 200157
Material St-tZn (1.0037 hot dipped galvanized)
Weight 5,8 kg
Version stainless steel incl. Screws
Ref. No. 200219
Material pickled stainless steel (AISI 316)
Weight 5,8 kg
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
11-2E-Mail: offi [email protected] | Internet: www.cresto.se
Short Code: WP-R Short Code: WP-R Short Code: WP-R
11 DATASHEET
Version galvanized steel St-tZn incl. Screws
Rigid Working Platform for pylons Short Code: WP-R
Tread 300 x 400mm
Mounting Point Centre Rail / Construction
Description Working Platform to be mounted on tubular constructions D=
114 and D= 88mm
Ref. No. 200217
Material St-tZn (1.0037 hot dipped galvanized)
Weight 8,5 kg
Version stainless steel incl. Screws
Ref. No. 200220
Material pickled stainless steel (AISI 316)
Weight 8,5 kg
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
11-3
Platform for pylons Short Code: WP-RPlatform for pylons Short Code: WP-R
11 DATASHEET
Version galvanized Steel St-tZn incl. Screws
Rigid Working Platformadjustable,for PylonsShort Code: WP-R
Tread 300x400mm
Mounting Point Construction
Diameters 88,9 / 114mm other diameters on demand
Description Working Platform adjustable to be mounted on tubular
constructions
Ref. No. 200269 - <diameter>
Material St-tZn(1.0037 hot dipped galvanised)
Weight 9,5 kg
Version stainless Steel incl. Screws
Ref. No. 200275 - <diameter>
Material Stainless Steel pickled (AISI 316)
Weight 9,5 kg
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
11-4E-Mail: offi [email protected] | Internet: www.cresto.se
88,9 / 114mm other diameters on demand
Rigid Working Platform
Short Code: WP-R
Rigid Working Platform
Short Code: WP-R
11 DATASHEET
Non permanent Working Platform for Pylons
Ref. No. 200034
Material anodised Aluminium (3.3206) and Stainless Steel pickled (AISI 316)
Weight 4,5 kg
Tread 300x400mm
Mounting Point Construction
Diameters 88,9 / 114mm other diameters on demand
Description Mobile Working Platform to be temporarily mounted on tubular
constructions
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
11-5
anodised Aluminium (3.3206) and Stainless Steel pickled (AISI 316)anodised Aluminium (3.3206) and Stainless Steel pickled (AISI 316)
12 DATASHEET
Version galvanized steel St-tZn incl. Screws
Extension 160mm Standard. Further extensions
are available up to 300mm
Description Basic Brackets that mount the ladder to the construction. The
bracket can be slid and rotated 180° in order to reach every point at
the construction.
Mount ø16mm wall side
Ref. No. 200176
Material St-tZn (1.0037 hot dipped galvanized)
Weight 1,4 kg
Version stainless steel incl. Screws
Ref. No. 200119
Material pickled stainless steel (AISI 316)
Weight 1,4 kg
Basic Brackets Short Code: BB
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
12-1
12 DATASHEET
Version galvanized Steel St-tZn incl. Screws
Extension <120-160> extension from 120-160mm adjustable
<160-200> extension 160-200mm adjustable
other extensions on demand
Description Multi adaptable Mounting Bracket, with oblong hole and usable in
upside down position. Covers every point at any level and extension
of the construction
Method of Fixation Depending from the material, construction and situation at site, bolt
diameter 16mm
Ref. No. 200176 - <extension from-to>
Material St-tZn (1.0037 hot dipped galvanised)
Weight 1,8 kg
Version stainless Steel incl. Screws
Ref. No. 200119 - <extension from-to>
Material Stainless Steel pickled (AISI 316)
Weight 1,8 kg
Mounting Bracket adjustable
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
12-2E-Mail: offi [email protected] | Internet: www.cresto.se
12 DATASHEET
Version galvanized Steel St-tZn incl. Screws
Extension <150-225> extension from 150-225mm adjustable
<225-300> extension 225-300mm adjustable
<300-375> extension 300-375mm adjustable
other extensions on demand
Description Multi adaptable Mounting Bracket, with oblong hole and usable in
upside down position. Covers every point at any level and extension
of the construction
Method of Fixation Depending from the material, construction and situation at site, bolt
diameter 16mm
Ref. No. 200288 - <extension from-to>
Material St-tZn (1.0037 hot dipped galvanised)
Weight 2,5 kg
Version stainless Steel incl. Screws
Ref. No. 200289 - <extension from-to>
Material Stainless Steel pickled (AISI 316)
Weight 2,5 kg
Mounting Bracket adjustable
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
12-3
12 DATASHEET
Mounting Clamp Short Code: MC
Version galvanized steel St-tZn incl. Screws
Diameter Min 60mm
Max. 1500mm
Extension 160mm Standard.
Further extensions are available up to 300mm
Description Mounting Clamp to mount the ladder to the tubular construction.
Ref. No. 200244
Material St-tZn (1.0037 hot dipped galvanized)
Weight From 1,8 kg
Version stainless steel incl. Screws
Ref. No. 200245
Material pickled stainless steel (AISI 316)
Weight From 1,8 kg
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
12-4E-Mail: offi [email protected] | Internet: www.cresto.se
12 DATASHEET
Wall Bracket Short Code: WB
Version galvanized steel St-tZn incl. Screws
Extension 160mm Standard. Further extensions
are available up to 1000mm
Description Wall Bracket to mount the ladder to constructions
with low strength, for instance Bricks.
Fixation Distance 560mm (recommended)
Mount ø12mm to the wall
Ref. No. 200246
Material St-tZn (1.0037 hot dipped galvanized)
Weight From 2,8 kg
Version stainless steel incl. Screws
Ref. No. 200247
Material pickled stainless steel (AISI 316)
Weight From 2,8 kg
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
12-5
Wall Bracket to mount the ladder to constructions
12 DATASHEET
Weld on Bracket Short Code: WOB
Version raw steel St incl. ScrewsVersion steel hot dipped galvanized St-tZn incl. Screws
Extension 160mm Standard. Further extensions
are available up to 280mm
Description Weld on Bracket to mount the ladder to metal constructions, for
instance Monopoles.
Mount Accordingly to the welding directive
Ref. No. 200248
Material St-raw (1.0037)
Weight From 0,8 kg
Ref. No. 200249
Material St-tZn (1.0037 hot dipped galvanized)
Weight From 0,8 kg
Version stainless steel incl. Screws
Ref. No. 200250
Material pickled stainless steel (AISI 316)
Weight From 0,8 kg
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
12-6E-Mail: offi [email protected] | Internet: www.cresto.se
Weld on Bracket to mount the ladder to metal constructions, for
12 DATASHEET
Material ST-tZn (1.0037 hot dip galvanized)
Description Made to fi x ladders along L shaped corner posts, for instance on lattice towers
Method of Fixation The sub construction should be examined to guarantee suffi cient strength
Extension Standard 70mm, 115mm if footrests are requested, other extensions on demand
Ref. No. 200251-<extension>
Weight 1,3 kg
Ref. No. 200253-<extension>
Weight 1,7 kg
Ref. No. 200255-<extension>
Weight 2,5 kg
on L-Profi le till 100x100mm incl. Screws
Ref. No. 200252-<extension>
Weight 1,5 kg
Ref. No. 200254-<extension>
Weight 2,3 kg
on L-Profi le from 110x110mm to 140x140mm incl. Screws
on L-Profi le from 190x190mm to 220x220mm incl. Screws
on L-Profi le from 150x150mm to 180x180mm incl. Screws
on L-Profi le from 230x230mm to 260x260mm incl. Screws
Corner Brackets L-Profi leShort Code: CB-ST
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
12-7
Short Code: CB-ST
12 DATASHEET
SupportExtension Standard 40mm, other extensions on demand
Description Made to fi x Safe Climbing Systems along sub constructions
Method of Fixation Depending from the material, construction and situation at site, bolt diameter 16mm
Ref. No. 200295-<extension>
Material St-tZn(1.0037 hot dipped
galvanised)
Weight from 0,6 kg
Version galvanized Steel St-tZn incl. Screws
Ref. No. 200296-<extension>
Material Stainless Steel pickled (AISI
316)
Weight from 0,6 kg
Version stainless Steel incl. Screws
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
12-8E-Mail: offi [email protected] | Internet: www.cresto.se
12 DATASHEET
ClampDiameter Standard 30mm other diameters on demand
Extension Standard 30mm, other extensions on demand
Description Made to fi x Safe Climbing Systems on round construction (tubes, pylons, etc.)
Ref. No. 200297 - <diameter>
Material St-tZn(1.0037 hot dipped
galvanised)
Weight from 0,9 kg
Version galvanized Steel St-tZn incl. Screws
Ref. No. 200298 - <diameter>
Material Stainless Steel pickled (AISI
316)
Weight from 0,9 kg
Version stainless Steel incl. Screws
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
12-9
12 DATASHEET
Support Post
Ref. No. 200299 - <height>
Material St-tZn (1.0037 hot dip galvanized)
Weight from 6 kg
Description made to bridge distances between the construction and the
system fi xation height variable, max. 500mm, need to be precisely
mentioned
Method of Fixation Depending from the material, construction and situation at site, bolt
diameter 16mm
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
12-10E-Mail: offi [email protected] | Internet: www.cresto.se
13 DATASHEET
Rung Clamp - Single Short Code: RCS Description Mounting of Fall Protection Guide Rails to existing ladders
Ref. No. 200199
Material anodised aluminium (3.3206)
Weight 0,2 kg
For Rung Diameter 15-50mm incl. Screws
Ref. No. 200206
Material St-tZn (1.0037 hot dipped galvanized)
Weight 0,2 kg
For Rung Diameter 18mm incl. Screws
Ref. No. 200187
Material St-tZn (1.0037 hot dipped galvanized)
Weight 0,3 kg
For Rung Diameter 20mm incl. Screws
Ref. No. 200209
Material pickled stainless steel (AISI 316)
Weight 0,2 kg
For rectangular rung 30x30mm incl. Screws
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
13-1
13 DATASHEET
Rung Clamp - DoubleRung Ø 15-25, 26-45, 46-55, 56-70mm (Standard)
Other rung Ø available upon request
Description Mounting of Fall Protection Guide Rails to existing ladders
Ref. No. 200236 - <rung Ø from-to>
Material St-tZn(1.0037 hot dipped galvanised)
Weight from 0,4 kg
Version galvanized Steel St-tZn incl. Screws
Ref. No. 200237 - <rung Ø from-to>
Material Stainless Steel pickled (AISI 316)
Weight from 0,4 kg
Version stainless Steel incl. Screws
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
13-2E-Mail: offi [email protected] | Internet: www.cresto.se
13 DATASHEET
ShimThickness 2, 3, 5mm (Standard) other gauges available upon request
Description The shim helps correct alignment tolerances with the sub
construction (i.e. ladder rungs or grapplers) with the attachment
of clamping rails
Specifi cation Aid Insure that the screws are long enough for this attachment
Ref. No. 200286 - <Gauge>
Material St-tZn(1.0037 hot dipped galvanised)
Weight from 0,2 kg
Version galvanized Steel St-tZn
Ref. No. 200287 - <Gauge>
Material Stainless Steel pickled (AISI 316)
Weight from 0,2 kg
Version stainless Steel pickled
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
13-3
14 DATASHEET
For I-Type Ladders removable made of Aluminium / Stainless Steel, incl. Screws
Ref. No. 200224
Material anodised Aluminium (3.3206) and
stainless steel pickled (AISI 316)
Weight 6,0 kg
Ladder segment not included
Description Cover plate removable on I-Type ladder,
made to protect the ladder way against
unauthorized use, secured with a
padlock
Cover Plateon I-Type ladderShort Code: COV-I
Length 2000mm
Mount Ladder Steps
For I-Type Ladders pivoting, made of Aluminium / Stainless Steel, incl. Screws
Ref. No. 200225
Material anodised Aluminium (3.3206) and
stainless steel pickled (AISI 316)
Weight 20,0 kg
Ladder segment comes with I-Type ladder segment, with
recess
Description Cover plate pivoting on I-Type ladder,
made to protect the ladder way against
unauthorized use from the front and the
back. Secured with a padlock, hinged
left or the right side of the ladder.
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
14-1
14 DATASHEET
For H-Type Ladders removable, made of Aluminium / Stainless Steel, incl. Screws
Ref. No. 200266
Material anodised Aluminium (3.3206) and
stainless steel pickled (AISI 316)
Weight 6,0 kg
Ladder segment not included
Description Cover plate removable on H-Type
ladder, made to protect the ladder way
against unauthorized use, secured with
a padlock
Cover Plateon H-Type ladderShort Code: COV-H
Length 2000mm
Mount Ladder Steps
For H-Type Ladders pivoting, made of Aluminium / Stainless Steel, incl. Screws
Ref. No. 200267
Material anodised Aluminium (3.3206) and
stainless steel pickled (AISI 316)
Weight 26,0 kg
Ladder segment comes with H-Type ladder segment,
with recess
Description Cover plate pivoting on H-Type ladder,
made to protect the ladder way against
unauthorized use from the front and the
back. Secured with a padlock, hinged
left or the right side of the ladder.
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
14-2E-Mail: offi [email protected] | Internet: www.cresto.se
14 DATASHEET
Folding Ladder
Ref. No. 200263
Material St-tZn (1.0037 hot dip galvanized)
Weight 27,5 kg
Description Folding H-Type Ladder with central integrated Fall Protection Rail
made to protect the ladder way against unauthorized use, secured
with a padlock. In locked position steps are folded up and covered by
the frame of the side rungs. Inconspicuous appearance when folded.
To be used with Monostop and Twinstop®
Step height 280mm
Step wide per side 150mm
Step surface punched, anti slide
Step shaped ergonomic
slip protection left and right
centre rail 50x32mm
Locking Distance 140mm
Total width folded 130mm, opened 430mm
Total depth 65mm
Segment Length 2800mm
Mounting Interval Max. 1540mm, recommended 1260mm. max 315mm stand-over from the last bracket
Method of Fixation Depending from the material, construction and situation at site
Extras all confi rmed accessories
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
14-3
made to protect the ladder way against unauthorized use, secured
with a padlock. In locked position steps are folded up and covered by
15 DATASHEET
Version St-tZn
Designation Flat Head Screw M12x <length>, incl. nut and locking washer
Length 35 / 60 / 90 / 120mm
Description Flat Head Screw to mount the ladder to the brackets /clamps, as
well as other components of the ladder
Ref. No. 200265 - <length>
Material St 8.8-tZn (hot dipped galvanized)
Weight 0,1 kg
Version Stainless Steel
Ref. No. 200274 - <length>
Material pickled stainless steel (AISI 316)
Weight 0,1 kg
Flat Head Screws Short Code: FHS
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
15-1
Flat Head Screw M12x <length>, incl. nut and locking washer
16 DATASHEET
User Manual Twinstop®
Twinstop®
Protection BagType Plate Twinstop®
Fall Arrester Twinstop®
Short Code: Twinstop®
Ref. No. 20000B
Material Aluminium and Stainless Steel
Weight 1,2 kg
Description Gliding Fall Protection Shuttle applies to EN 353-1, with integrated
shock absorber. The Shuttle arrests through a speed activated
mechanism, that will fuction even when the user manually or by position
pulls the karabiner. Can be used in negative declined ladders up to
-25°. Delivered with a Tri-lock Karabiner and swivel eye.
Ref. no. 400076
Weight 0,1 kg
Comes with the Shuttle – Needs
to be attended before using the
shuttle
Ref. no. 400074
Material Polyester
Weight 0,1 kg
Ref. no. 400057
Material aluminium
Weight 0,1 kg
Measures 111 x 200 mm
Type Plate comes with ladder / guide rail sections. Needs to be placed at the beginning of each ladder way. Can be ordered separately for re-certifying existing ladder ways and shows the compatibility of those ladder ways with Twinstop®
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
16-1
®
®
Gliding Fall Protection Shuttle applies to EN 353-1, with integrated
shock absorber. The Shuttle arrests through a speed activated
mechanism, that will fuction even when the user manually or by position
®
®
Gliding Fall Protection Shuttle applies to EN 353-1, with integrated
shock absorber. The Shuttle arrests through a speed activated
mechanism, that will fuction even when the user manually or by position
Steigschutzeinrichtunggepr. nach DIN EN 353-1
nur mit geeignetem mitlaufenden Auffanggerät benutzen
Baujahr
MKL-Technik GmbHDresdner Strasse 46D-44139 DortmundService Phone+Fax: 0700/6550 6550, E-Mail: [email protected]
16 DATASHEET
User Manual MonoStop
MonoStop Protection Bag Type Plate MonoStop
Fall Arrester MonostopShort Code: MonoStop
Ref. No. 200044B
Material Aluminium and Stainless Steel
Weight 1,2 kg
Description Gliding Fall Protection Shuttle applies to EN 353-1, with integrated
Shock absorber. Delivered with a Tri-lock Karabiner and swivel eye.
Ref. no. 400077
Weight 0,1 kg
Comes with the Shuttle – Needs
to be attended before using the
shuttle
Ref. no. 400075
Material Polyester
Weight 0,1 kg
Ref. no. 400071
Material aluminium
Weight 0,1 kg
Measures 111 x 200 mm
Type Plate comes with ladder / guide rail sections. Needs to be placed at the beginning of each ladder way. Can be ordered separately for re-certifying existing ladder ways and shows the compatibility of those ladder ways with Monostop
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
16-2E-Mail: offi [email protected] | Internet: www.cresto.se
Fall Arrester MonostopShort Code: MonoStop
Gliding Fall Protection Shuttle applies to EN 353-1, with integrated
Shock absorber. Delivered with a Tri-lock Karabiner and swivel eye.
Fall Arrester MonostopShort Code: MonoStop
Gliding Fall Protection Shuttle applies to EN 353-1, with integrated
Shock absorber. Delivered with a Tri-lock Karabiner and swivel eye.
for your safy on the top!
Steigschutzeinrichtunggepr. nach DIN EN 353-1
nur mit geeignetem mitlaufenden Auffanggerät benutzen
Baujahr
MKL-Technik GmbHDresdner Strasse 46D-44139 DortmundService Phone+Fax: 0700/6550 6550, E-Mail: [email protected]
17 DATASHEET
User Manual H-Stop Protection Bag Type Plate H-Stop
Horizontal Anchor DeviceShort Code: H-Stop
Ref. No. 200136A
Material anodised Aluminium and stainless steel
Weight 0,6 kg
Description Wheeled Trolley to be used as movable Anchor point in horizontal guide
rails, in accordance to EN 795-D
Ref. No. 400089
Weight 0,1 kg
The user manual is part of the
system, read before using is
obligatory
Ref. No. 400090
Material Polyester
Weight 0,1 kg
Ref. No. 400091
Material Aluminium
Weight 0,1 kg
Measures 111 x 200mm
Type Plate comes with the rail section. It shows
the conformity, and needs to be placed at any
possible entering point of the system
E-Mail: offi [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
17-1
17 DATASHEET
Anchor PointClamp with Eye
Version galvanized Steel St-tZn incl. Screws
Diameter min. 60mm
max. 300mm
Diameter needs to be mentioned at any order
Description Anchor Clamp with Eye, in accordance to EN 795-A. To be fi xed on
round constructions
Ref. No. 200300 - <diameter>
Material St-tZn (1.0037 hot dip galvanized)
Weight from 1,4 kg
Version stainless Steel incl. Screws
Ref. No. on demand
Material Stainless Steel pickled (AISI 316)
Weight from 1,4 kg
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifi ca
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: offi [email protected] | Internet: www.cresto.se
17-2E-Mail: offi [email protected] | Internet: www.cresto.se
18 DATASHEET
Personal Protective Equipment
on request
E-Mail: [email protected] | Internet: www.cresto.se
© C
RES
TO s
afet
y A
B, J
anua
ry 2
010,
tech
nica
l mod
ifica
tions
rese
rved
. P
leas
e pa
y at
tent
ion
to o
ur te
chni
cal d
ocum
enta
tion.
Acc
ompl
ishi
ng s
yste
m c
ompo
nent
s an
d sp
ecia
l con
stru
ctio
ns o
n re
ques
t
E-Mail: [email protected] | Internet: www.cresto.se
18-1
© M
KL-
Tech
nik
Gm
bH
Sta
nd 1
/200
7
AGB
I. Allgemeine Bestimmungen1. Sämtliche Lieferungen und Leistungen basieren maßgeblich auf unseren
allgemeinen Geschäftsbedingungen sofern diesen nicht binnen 8 Tagen nach Vertragsabschluss schriftlich widersprochen wird. Sondervereinba-rungen werden erst durch schriftliche Bestätigung unserer im Handelsre-gister eingetragenen Bevollmächtigten rechtsverbindlich.
2. Angebote sind unverbindlich3. An Unterlagen aller Art, auch in elektronischer Form, behält sich der
Auftragnehmer / Lieferer, seine Eigentums- und Urheberrechte uneinge-schränkt vor. Die Unterlagen dürfen nur nach vorheriger Zustimmung des Auftragnehmers / Lieferers Dritten zugänglich gemacht werden. Sie müs-sen dem Auftragnehmer / Lieferer zurückgegeben werden, wenn kein Vertragsabschluss erreicht wird.
II. Preise und Zahlungsbedingungen1. Die Preise gelten ab Werk, ausschließlich Verpackung, Versicherung und
Mehrwertsteuer, diese werden in der jeweils entsprechenden gesetz-lichen Höhe separat berechnet.
2. Angemessene Preisanpassung bei außergewöhnlicher Veränderung der Kostenfaktoren (Energie, Rohmaterial, Löhne), für Lieferungen die 4 Mo-nate oder später nach Vertragsabschluss erfolgen, bleiben vorbehalten.
3. Wird ein vereinbartes Auftragsvolumen nachträglich verringert, können die Preise / Rabatte entsprechend der veränderten Rüstkosten nachträg-lich angepasst werden.
4. Die Rechnungen des Lieferanten sind ohne Abzug innerhalb von 30 Ta-gen nach Rechnungsdatum zahlbar. Ist die Zahlungsfrist überschritten, so ist der Lieferant ohne weitere Mahnungen berechtigt, vom Zeitpunkt der Fälligkeit an, Zinsen in Höhe von 8 % jährlich über den jeweiligen Basiszinssatz der Europäischen Zentralbank zu verlangen. § 288 BGB bleibt unberührt
5. Gerät der Auftraggeber/Käufer in Verzug, löst er einen Wechsel bei Fäl-ligkeit nicht ein oder werden uns nachträglich Umstände bekannt, aus denen sich eine Verschlechterung seiner Zahlungsfähigkeit ergeben, werden unsere gesamten Forderungen abweichend von den obigen Zahlungsbedingungen sofort fällig. Zur weiteren Lieferung sind wir in diesem Fall nur verpflichtet, wenn uns der Auftraggeber/Käufer Voraus-zahlung anbietet. Werden keine Barzahlungen Zug um Zug gegen eine Lieferung angeboten, so sind wir berechtigt, Schadensersatz wegen Nichterfüllung zu verlangen oder vom Vertrag zurückzutreten.
III. Lieferung1. Leistungsort für die Lieferung ist der Firmensitz des Lieferers2. Zugesagte Lieferzeiten werden erst mit der jeweiligen schriftlichen Auf-
tragsbestätigung verbindlich. Von der vorgegebenen Lieferzeit kann ab-gewichen werden, wenn dies 8 Tage vor dem vereinbarten Liefertermin schriftlich mitgeteilt wird. Mahnung zu ausstehenden Lieferungen müs-sen schriftlich erfolgen.
3. Die Lieferzeit gilt als eingehalten, wenn der Gegenstand das Werk ver-lassen hat, bzw. wenn die Ware als versandfertig gemeldet wird. Höhere Gewalt, Arbeitskämpfe und unvorhersehbare Umstände, die die Liefe-rung wesentlich erschweren oder vorübergehend unmöglich machen (z. B. Feuer, Maschinendefekte, Rohstoff- oder Energiemangel, währungs- und handelspolitische oder sonstige hoheitliche Maßnahmen, Behinde-rung der Verkehrswege, etc.), wobei es unerheblich ist, ob diese Behin-derung primär uns oder unsere Zulieferer treffen, geben uns das Recht die Lieferung um die Dauer der Behinderung und einer angemessenen Anlaufzeit zu verlängern. Für den Fall des Eintritts dieser unvorherge-sehenen Ereignisse wird, sofern sie die wirtschaftliche Bedeutung oder den Inhalt der Leistung erheblich verändern, der Vertrag entsprechend angepasst. Soweit dies wirtschaftlich nicht vertretbar ist, steht uns das Recht zu ganz oder teilweise vom Vertrag zurückzutreten. Wird durch die vorgenannten Ereignisse die Lieferung oder Leistung unmöglich, so werden wir von der Lieferverpflichtung frei, ohne dass der Auftraggeber/Käufer Schadenersatz verlangen kann.
4. Abgesehen der in Regelung Ziffer III. 4. beschriebenen Umstände, kann der Auftraggeber/Käufer im Rahmen der gesetzlichen Bestimmungen vom Verkauf nur zurücktreten, wenn die Verzögerung der Lieferung oder Leistung vom Auftragnehmer/Verkäufer zu verantworten ist. Eine Ände-rung der Beweislast zum Nachteil des Auftraggebers/ Käufers entsteht mit den vorstehenden Regelungen nicht. Bei Lieferverzug, der nicht auf Ziffer III. 4. beruht, hat der Auftraggeber/Käufer dem Auftragnehmer/Verkäufer eine angemessene Nachfrist, die im Regelfall nicht unter zwei Wochen liegen soll, zu setzen. Die Fristsetzung hat schriftlich zu erfolgen. Nach fruchtlosem Fristablauf kann der Auftraggeber/Käufer von denjeni-gen Lieferungen und Leistungen zurücktreten. Der Auftraggeber/Käufer ist verpflichtet, auf Verlangen des Auftragnehmers/Verkäufers innerhalb angemessener Frist zu erklären, ob er wegen der Verzögerung der Lie-ferung oder Leistung vom Vertrag zurücktritt oder auf der Lieferung oder Leistung besteht. Teillieferungen der Gesamtauftragsmenge oder Teillei-stungen sind zulässig soweit sie dem Auftraggeber/Käufer zumutbar sind.
5. Kommt der Auftragnehmer/Verkäufer schuldhaft in Verzug, kann der Auf-traggeber/Käufer, sofern er glaubhaft macht, dass ihm hieraus ein Scha-den entstanden ist, eine Entschädigung für jede vollendete Woche des Verzuges von je 0,5 %, insgesamt jedoch höchstens 5 % des Preises für den Teil der Lieferungen oder Leistungen verlangen, mit deren Erbringung sich der Auftragnehmer/Verkäufer in Verzug befindet. Sowohl
Allgemeine Geschäftsbedingungen für Lieferungen und Leistungen der MKL-Technik GmbH
19-1
© M
KL-
Tech
nik
Gm
bH
Sta
nd 1
/200
7
AGB
Schadenersatzansprüche des Auftraggebers/Käufers wegen Verzögerung der Lieferung oder Leistung als auch Schadenersatzansprüche statt der Leistung, die über die vorgenannten Grenzen hinausgehen, sind in allen Fällen verzögerter Lieferung oder Leistung, auch nach Ablauf einer dem Auftragnehmer/Verkäufer gesetzten Frist zur Lieferung oder Leistung aus-geschlossen. Dies gilt nicht, soweit in Fällen des Vorsatzes, der groben Fahrlässigkeit oder wegen der Verletzung des Lebens, des Körpers oder der Gesundheit zwingend gehaftet wird.
IV. Gefahrenübergang1. Die Gefahr geht, auch bei frachtfreier Lieferung, wie folgt auf den Besteller
über:a) bei Lieferungen ohne Aufstellung oder Montage, bei Versandbereitstel-
lung oder Abholung. Auf Wunsch und Kosten des Bestellers werden Lie-ferungen vom Lieferanten gegen die üblichen Transportrisiken versichert
b) mit Übergabe der Ware an die Transportfirma2. Vertragsgemäße versandfertig gemeldete Ware muss unverzüglich
abgerufen werden, da wir anderenfalls berechtigt sind, sie auf Kosten und Gefahr des Auftraggeber/Käufer zu versenden oder sie gegen den marktüblichen Preis zu lagern.
3. Wenn der Versand, die Zustellung, aus vom Besteller zu vertretenden Gründen verzögert wird oder der Besteller aus sonstigen Gründen in An-nahmeverzug kommt, so geht die Gefahr auf den Besteller über.
V. Eigentumsvorbehalt1. Die Gegenstände der Lieferungen ( Vorbehaltsware ) bleiben Eigentum
des Lieferers bis zur Erfüllung sämtlicher ihm gegen den Besteller aus der Geschäftsverbindung zustehenden Ansprüche.
2. Während des Bestehens des Eigentumsvorbehaltes ist dem Besteller eine Verpfändung oder Sicherungsübereignung untersagt. Der Besteller ist jederzeit widerruflich berechtigt, die gelieferten Gegenstände im ord-nungsgemäßen Geschäftsverkehr zu verarbeiten oder mit anderen zu verbinden. Die Verarbeitung oder die Verbindung erfolgt für den Lieferer, wodurch er Eigentum an den durch die Verarbeitung oder Verbindung entstehenden Gegenständen erwirbt. Soweit durch die Verarbeitung das Eigentum des Lieferers an der Ware untergeht, überträgt ihm der Bestel-ler bereits heute das Eigentum an dem durch die Verarbeitung entstehen-den neuen Gegenstand.
3. Der Besteller ist jederzeit widerruflich berechtigt, die Ware im ordnungs-gemäßen Geschäftsverkehr zu veräußern. Er tritt bereits heute seine For-derungen aus den Weiterveräußerungen an den Lieferer ab. Steht die Ware im Eigentum des Lieferers oder im Eigentum dritter Personen, so tritt uns der Besteller die Forderungen aus dem Verkauf zu demjenigen Bruchteil ab, der unserem Miteigentumsanteil entspricht.
4. Der Besteller ist solange berechtigt und verpflichtet an den Lieferer abge-tretene Forderungen einzuziehen, als er diese Ermächtigung nicht aus-drücklich widerrufen hat.
5. Der Besteller hat die Ware sorgfältig zu verwahren und auf seine Kosten ausreichend gegen Diebstahl und Feuer zu versichern.
6. Bei Pfändungen, Beschlagnahmen oder sonstigen Verfügungen oder Eingriffen Dritter hat der Besteller den Lieferer unverzüglich zu benach-richtigen.
7. Soweit Einzelheiten über die Gestaltung einschließlich der einzuhaltenden Toleranzen durch DIN-Normen festgelegt sind, sind diese DIN-Normen
in der größten Toleranzgruppe einzuhalten, Abweichungen von den Be-stimmungen der DIN-Normen sind besonders schriftlich zu vereinbaren.
8. Im Übrigen behalten wir uns Abweichungen im handelsüblichen Umfang vor.
VI. Sachmängel1. Offensichtliche Mängel müssen innerhalb von 14 Tagen nach Abliefe-
rung schriftlich gerügt werden. Dabei sind begonnene Be- oder Ver-arbeitungen unverzüglich einzustellen. Verdeckte Mängel, die auch bei sorgfältigster Prüfung nicht entdeckt werden können, müssen unverzüg-lich schriftlich nach Auftreten gerügt werden. Unvollständige Lieferungen müssen innerhalb von 8 Tagen nach der Anlieferung angezeigt werden.
2. Wird ein berechtigter Mangel zum Zeitpunkt des Gefahrenübergangs schriftlich und fristgerecht angezeigt, beseitigt der Auftragnehmer diese unentgeltlich nach seiner Wahl durch Ersatzlieferung oder Nachbesse-rung.
3. Bei Nichterfüllung kann der Auftraggeber den Vertrag rückgängig ma-chen, bzw. Minderung verlangen. Mängelansprüche bestehen nicht wenn die Funktion, Benutzbarkeit oder die Lebensdauer des Produktes nicht beeinträchtigt ist.
4. Keine Gewährleistung wird in folgenden Fällen übernommen: a) Unsachgemäße Verwendung, fehlerhafte Montage bzw. Inbetrieb-
setzung durch den Auftraggeber oder Dritteb) normale Abnutzung, insbesondere von Verschleißteilenc) fehlerhafte oder nachlässige Behandlungd) ungeeignete Betriebsmittel, Austauschwerkstoffe) mangelhafte Bauarbeiten, ungeeigneter Baugrundf) chemische, elektronische oder elektrische Einflüsse, sofern sie nicht
auf das Verschulden des Auftragnehmers zurückzuführen sind.5. Durch etwa seitens des Auftraggebers oder Dritter unsachgemäß ohne
vorherige Genehmigung des Auftragnehmers vorgenommene Ände-rungen oder Instandsetzungsarbeiten wird die Haftung für daraus ent-standene Folgen aufgehoben.
6. Zur Mängelbeseitigung muß dem Auftragnehmer eine angemessene Frist gesetzt werden, wird diese verweigert, ist der Auftragnehmer von der Mangelhaftung befreit.
7. Bei Gefährdung der Betriebssicherheit und zur Abwehr unverhältnismä-ßig großer Schäden sowie bei Verzug des Auftragnehmers in der Man-gelbeseitigung, hat der Auftraggeber das Recht den Mangel selbst oder durch Dritte beseitigen zu lassen und vom Auftragnehmer entstandene Kosten einzufordern. Hierbei muss der Auftragnehmer vorher schriftlich in Kenntnis gesetzt werden.
Allgemeine Geschäftsbedingungen für Lieferungen und Leistungen der MKL-Technik GmbH
19-2
© M
KL-
Tech
nik
Gm
bH
Sta
nd 1
/200
7
AGB
VII. Gewährleistung1. Die Gewährleistung beträgt 12 Monate, gerechnet vom Tag der Annah-
me, danach sind etwaige Ansprüche verjährt.2. Dies gilt nicht in Fällen, soweit das Gesetz gemäß § 634 a I Nr. 2 BGB
längere Fristen vorschreibt sowie in Fällen der Verletzung des Lebens, des Körpers oder der Gesundheit bei einer vorsätzlichen oder grob fahr-lässigen Pflichtverletzung des Auftragnehmers und bei arglistigem Ver-schweigen des Mangels.
3. Gesetzlichen Regelungen über Ablaufhemmung, Hemmung und Neube-ginn der Fristen bleiben unberührt.
4. Zur Mängelgewährleistung muss dem Auftragnehmer die mangelhafte Ware auf Verlangen unverzüglich zur Verfügung gestellt werden.
5. Kosten für die Demontage, Instandsetzung sowie etwaige Folgeschäden werden nur dann übernommen, wenn diese vorher schriftlich mitgeteilt wurden, und dem Auftragnehmer angemessen Zeit zur Nachbesserung gewährt wurde.
6. Die Gewährleistung erstreckt sich nicht auf Fremdteile die ohne unser Einverständnis selbst oder durch Dritte gefertigt und in Umlauf gebracht wurden. Beziehungsweise auf Originalteile unserer Firma die ohne unser Einverständnis selbst oder durch Dritte baulich verändert oder modifiziert wurden.
7. Bei unsachgemäßer Anwendung und Nutzung wird jede Verantwortung seitens des Auftragnehmers/Verkäufers abgelehnt.
8. Die Geräte unterliegen der Gerätekategorie 3 und müssen somit jährlich durch den Hersteller oder vom Hersteller autorisierte Firmen revidiert wer-den.
9. Ergänzend dazu gelten die gesetzlichen Bestimmungen am Verwen-dungsort
10. Sollten bei einem Geschäft abweichend Konditionen vereinbart sein, so sind sie nur dann gültig, wenn der Auftragnehmer/Verkäufer diesen schriftlich zugestimmt hat. Im Gewährleistungsfall ist eine Kopie der schriftlichen Zustimmung vorzulegen.
VIII. Haftungsausschluß, Haftpflicht1. Die Haftung des Auftragnehmers gegenüber des Auftraggebers besteht
grundsätzlich nur bei Vorsatz und grober Fahrlässigkeit gemäß den ge-setzlichen Bestimmungen.
2. Haftung obliegt ebenfalls bei wesentlicher Verletzung des Vertrages und abweichender Produkteigenschaft.
3. Haftung bei abweichenden Produkteigenschaften gilt ausschließlich zur Absicherung gegen Mängelfolgeschäden.
4. Bei fahrlässiger Verletzung vertragswesentlicher Pflichten des Auftrag-nehmers gegenüber dem Auftraggeber ist eine Ersatzpflicht, nur auf den vertragstypischen, vernünftigerweise vorhersehbaren Schaden begrenzt. In allen anderen Fällen ist die Haftung des Auftragnehmers gegenüber dem Auftraggeber, gleich aus welchem Rechtsgrund – ausgeschlossen.
5. Bei Ansprüchen auf Ersatz von Schäden, die nicht an der Ware selbst entstanden sind – sogenannte Mangelfolgeschäden – haftet der Auftrag-nehmer/Verkäufer ebenfalls nur bei Vorsatz und grober Fahrlässigkeit.
6. Für nicht vorhersehbare Schäden haftet der er nicht. Dies gilt nicht, wenn der Auftraggeber/Käufer gegen diese Schäden üblicherweise versichert werden kann oder versichert ist. Im Übrigen wird die Haftung auf den Deckungsumfang unserer Betriebshaftpflichtversicherung begrenzt.
IX. Erfüllungsort, Gerichtsstand, anzuwendendes Recht1. Alleiniger Gerichtsstand ist, wenn der Besteller Kaufmann ist, bei allen
aus dem Vertragsverhältnis unmittelbar oder mittelbar sich ergebenden Streitigkeiten der Sitz des Lieferanten. Der Lieferer ist jedoch auch be-rechtigt, am Sitz des Bestellers zu klagen.
2. Für die Rechtsbeziehungen im Zusammenhang mit diesem Vertrag gilt deutsches materielles Recht unter Ausschluss des Übereinkommens der Vereinten Nationen über Verträge über den internationalen Warenkauf.
X. Datenspeicherung; Benachrichtigunggemäß § 33 Abs. 1 BDatSchG1. Die zur Ausführung des Vertragsverhältnisses erforderlichen Daten wer-
den vom Lieferer gespeichert.
XI. Salvatorische Klausel1. Die Vertragspartner sind sich darin einig, dass im Falle der Teilnichtigkeit
dieser Vereinbarung der nicht nichtige Teil Geltung behält und durch die gesetzliche Bestimmung eine Ergänzung findet
Allgemeine Geschäftsbedingungen für Lieferungen und Leistungen der MKL-Technik GmbH
19-3