fans with ec motor - systemair · pdf filefans | air handling units ... plus dehumidifiers....

2 | Systemair

Intelligent and energy efficient ventilation technology

© Systemair 2014. Systemair reserves the right to make technical changes. For updated documentation, please refer to www.systemair.com.

Systemair | 3

All our ventilation products in this leaflet are equipped with modern EC motor technology. They are the first choice where the economical use of energy, cost saving installation and easy control are required.

EC technology is intelligent technology, using integral electronic control to connect an EC motor to an AC mains supply, prewired for an easy connection. The benefits are clear and convincing: high energy efficiency, easy to install and ideal for new buildings and renovations. Read more on the following pages!

Contents

Systemair across the world 4

Energy efficient and environmentally friendly fans 6

Comparison with conventional technology 7

Overview EC range 8

Demand controlled ventilation systems 10

- EC-Basic 11

- EC-Vent 12

Circular duct fans 14

Rectangular duct fans 30

Thermo fans 34

Roof fans 46

Axial fans 56

Smoke extract fans 60

4 | Systemair

Systemair across the world

Skinnskatteberg, Sweden The Group headquarters, distribution center and largest production site. Production of compact air handling units and a wide range of fans and accessories. Production of air curtains and fan heaters for Frico, a company within the Systemair Group.

Hässleholm, SwedenProduction of heating products for air handling units, mobile and fixed fan heaters, plus dehumidifiers.

Windischbuch, Germany Production facility and distribution center, specialising in engineered products.

Langenfeld, GermanyProduction of air curtains.

Mühlheim an der Ruhr, GermanyProduction of air handling units for swimming pool halls and comfort ventilation with extra high efficiency.

Ukmergé, LithuaniaProduction of residential units and large air handling units.

Maribor, Slovenia Production of high-temperature fans for smoke extract ventilation.

Aarhus, Denmark Production of large air handling units – ”central units”.

Bratislava, Slovakia Production of air distribution products; fire dampers.

Hyderabad, IndiaProduction of air distribution products.

Systemair across the world

Systemair | 5

Kuala Lumpur, Malaysia

Skinnskatteberg, SwedenHässleholm, Sweden

Ukmergé, Lithuania

Bratislava, SlovakiaMaribor, Slovenia

Windischbuch, Germany

Madrid, Spain

Aarhus, Denmark

Waalwijk, The Netherlands

Lenexa, USA

Eidsvoll, Norway

Bouctouche, Canada

Mühlheim a.d.R., Germany

Milan, ItalyIstanbul, Turkey

Langenfeld, Germany

New Delhi, India

Save Energy, lower running cost! Our label “Green Ventilation” features products with a high energy saving potential. All products labelled with “Green Ventilation” combine energy economy with energy efficiency.

Quality: Systemair is certified in accordance with ISO 9001; ISO 14001, ATEX and European fire safety standard EN 12101-3. Our research and development laboratories are one of the most modern in Europe; measurements are made in accordance with international standards such as AMCA and ISO.

Tillsonburg, Canada

Greater Noida, New Delhi, IndiaProduction of duct, axial and box fans, air handling units and air distribution products.

Kuala Lumpur, MalaysiaProduction of duct and axial fans.

Johannesburg, South AfricaProduction of axial fans.

Lenexa, USA Production of duct, axial and roof fans chiefly for the North American market. Distribution centre for the USA market.

Milan, ItalyProduction of a wide range of liquid- and air-cooled chillers and heat pumps for comfort cooling.

Tilliéres, FranceProduction of air conditioning products for the commercial market.

Madrid, Spain Production of large air handling units and box fans for markets in southern Europe, the Middle East and North Africa.

Bouctouche, Canada Production of air handling units for residential use in North America, plus dehumidifiers.

Tillsonburg, CanadaProduction of air handling units for classroom ventilation in the North American market.

Eidsvoll, Norway Production of air handling units.

Istanbul, TurkeyProduction of a wide range of air handling units and fan coils.

Waalwijk, The NetherlandsProduction of air handling units.

Hyderabad, India

Tillières, France

Johannesburg, South Africa

6 | Systemair EC Fans

Energy efficient and environmentally friendly

Top advantages of fans with EC motor from Systemair:

1. Up to 90% higher efficiency than conventional systems

2. Higher efficiency throughout the entire fan perfomance range

3. Less energy use, resulting in lower energy costs

4. Less energy use means lower CO2 emissions; lower emissions means lower global warming

5. Easy to control by 0-10 V signal

6. Long service life

7. Low sound level throughout the entire fan perfomance range

8. All control and protection electronics are integrated in the motor

9. Easy electrical connection

10. Ventilation on demand - easy to adjust ventilation rate to actual need

Everyone’s talking about climate protection, and calling for immediate action. But what needs to be done? The challenge has to be faced by in-dividuals as well as by organisations. If companies are to take their cor-porate social responsibility seriously,

and consumers are to adopt LOHAS (Lifestyle of Health and Sustainabil-ity), the focus will most definitely be on sustainable mate-rials and efficiency. Avoiding the use of energy is one thing, but the true answer in this context is to use

The challenge - energy-saving

Buildings account for 40% of the EU´s primary energy use.

40%EU directive to reduce energy use by 20% by 2020.

20%

it more efficiently. Then it will be possible to maintain the function, comfort and convenience that are part of a modern lifestyle.

Systemair, the ventilation company, offers you the opportunity to play an active part in this process. It has de-veloped a simple, effective answer that creates a win-win situation; in other words you, your customer and the environment all benefit.

Energy efficient and environmentally friendly fans

Systemair EC Fans | 7

Comparison with conventional technology

Power consumption per year is based on an installation running continuously. The CO2 impact based on as an average of the CO2 emission to produce continuously electricity for the European countries. Source: Umwelt-Bundes-Amt Germany. Factor 0.6 kg CO2/kWh

K EC/AC 200

KVKE EC/AC 315

MUB EC/AC 450E4

KBT EC/AC 200E4 TFSR EC/AC 160

DVC 355-S/DVS 355E4 AC

Comparison with conventional technology

8 | Systemair EC Fans

Overview EC range

Fans:

We offer you the widest range of ventilation products with EC motor technology

34MUB EC

Square duct fan MultiboxAir volume up to 3.63 m³/s

40MUB/T EC

Square duct fan MultiboxAir volume up to 4.12 m³/sfor higher temp. of transported air

KVKE EC 28

Insulated circular duct fansAir volume up to 0.52 m³/s

60DVG EC

Smoke extract roof fansAir volume up to 6.98 m³/s

KVO EC 22

Insulated circular duct fansAir volume up to 0.53 m³/s

K EC

Circular duct fansAir volume up to 0.48 m³/s

18

prioAir


14

KD EC


24

KBT/KBR EC

Thermo fansAir volume up to 0.92 m³/sfor higher temp. of transported air

42

DVC/DVCI

Roof fansAir volume up to 3.63 m³/s

48

RS/RSI EC

Rectangular duct fansAir volume up to 2.97 m³/s

DVC/DVCI POC

Roof fansAir volume up to 3.63 m³/sIncl. outdoor temperature compensation

52

30

TFSR/TFSK EC

Roof fansAir volume up to 0.22 m³/s

46

AW sileo EC

Axial fansAir volume up to 9.72 m³/s

56

Systemair EC Fans | 9

Residential ventilation: Air handling units:for single-family houses, housing and small commercial units

SAVE VSR 150/B SAVE VTC 700

Topvex FRSAVE VSR 300/500

Topvex TR / TX

VR 400 und 700 DCV/DE

Topvex SR / SX / SCSAVE VTC 200/300

SAVE VTR 150/200/300/500

DVCompact / TIME

More information available in our Residential ventilation cata-logue or in the online catalogue under www.systemair.com.

More information available in our Air handling units cata-logue or in the online catalogue under www.systemair.com.

For a ventilated area up to 100 m²,rotary heat exchanger

For a ventilated area up to 600 m²,counter-flow heat exchanger

Low overall height,double rotary heat exchanger


Connections at the top rotary- or cross-flow heat exchanger

Connections sidewardsrotary-, cross-flow- or counter-flow heat exchanger


For a ventilated area up to 300 m²,counter-flow heat exchanger


Modular air handling units

10 | Demand Controlled Ventilation Systems

Our controllers for your ventilation system

Energy efficient ventilation is about designing a system in a smart way, using a fan that has a high efficiency and adjusting the ventilation rate to the actual need, instead of always operating at full capacity, while maintaining good indoor air quality.

Today Systemair has the widest range of EC fans on the ventilation market, and offers two different control systems which will make it easy for the consultant, con-tractor and end user to design, install and run a demand controlled ventilation system (DCV).

Demand controlled ventilation systems

Demand Control Ventilation - how easy can it be to control a ventilation system in an com-fortable and energy efficient way? We promise you, it can be very easy. Systemair offers you a basic and advanced version.

Demand Controlled Ventilation Systems | 11

EC-Basic controllerSimple control for energy efficient EC fans

Systemair’s new EC-Basic range of controllers has been developed as an economical solution to meet simple control requirements such as temperature, humidity, temperature and CO2 and universal 0-10V. EC-Basic can be used with all EC fans even for existing systems. The controllers are simple and easy to connect,

EC-Basic Art-no. Voltage/Frequency Function

EC-Basic-T 24805 100-240VAC, 50/60 Hz Temperature controller

EC-Basic-U 24806 100-240VAC, 50/60 Hz Universal controller, 0-10V

EC-Basic-H 24807 100-240VAC, 50/60 Hz Humidity controller

EC-Basic-CO₂/T 24808 100-240VAC, 50/60 Hz CO₂ and temperature controller

install and set up. EC-Basic is an energy-efficient control-ler. Only the energy needed to create the right level of comfort is used. The integrated sensor (external sensor for the universal controller) measures the current conditions. The fans automatically slow down when there is less demand.

Your benefits at a glance: y Energy efficient

y Economical and affordable demand control when using EC fans in a system

y Simple to connect, install and set up

y Can be used with all EC fans

y Meets most fan control requirements

y Solves many common ventilation problems

y CE standard conformity: EN 60730-1, EN 61000-6-3, EN 61000-6-1

y Enclosure class: IP30

y Usable with either 50Hz or 60Hz supply

Basic Version

%

CO2

°C°C EC-Basic-CO₂/TCO₂ and temperature controller

EC-Basic-HHumidity controller

0-10V

EC-Basic-TTemperature controller

EC-Basic-UUniversal controller

°C°C

Choose your optionThe EC-Basic range is available in 4 control options:

EC-Basic

NEW!

12 | Demand Controlled Ventilation Systems

Advanced Version

EC-Vent

EC-Vent Intelligent control for energy efficient EC fans

Different sensors can be connected to the system, the highest value is controlling the system. EC-Vent is easy to install and reduces operating costs. It also provides lower noise levels and longer service life. The EC-Vent consists of two units, one central unit to be placed near the fan and a single display unit normally sited in a room easily accessible to the user. These units are connected to each other with a low voltage cable.

More detailed information of EC-Vent you can find in our online catalogue at www.systermair.com.

Systemair’s EC-Vent raises energy efficiency and indoor comfort to new levels. It greatly simplifies demand con-trolled ventilation. This intelligent controller effectively varies ventilation speed based on input from multiple sensors:

• Humidity• CO2 level• Presence detectors• Pressure• Temperatur and• Timer.

Demand-controlled ventilation system with KVKE EC and EC-Vent, based on temperature and CO2 values, combined with timer functions.

Demand Controlled Ventilation Systems | 13

Now available!The new EC-Vent Wizard Quick setup guide - E8256

EC-Vent Intelligent control for energy efficient EC fans

EC-Vent: one controller - many possibilities

%CO

2

°C°C

Manual

Humidity

Air quality

Presence

Pressure

Temperature

Time Su/W

i

EC-Vent controls the degree of ventilation in buildings to meet different levels of occupancy as detected by sensors located within the areas to be ventilated. The result is an indoor climate that always matches building use and occupa-tion. EC-Vent comprises a control unit located near the fan plus a remote room unit.

Name Art. no.

EC-Vent room unitbuilt-in humidity and temperature sensors

3018

EC-Vent control board 3115

Room sensor TG-R5/PT1000Outdoor sensor TG-UH/PT1000Duct sensor TG-KH/PT1000

5404

35203

202705

Room humidistat/Hygrostat HR1 5150

Timer 5165

Pressure sensor DSG 200Pressure sensor DSG 500Pressure sensor DSG 1000

5169

5170

9466

CO2 Transmitter (digital) CO2RT-R-D CO2 Sensor CO2RT

699313704

Presence detector/IR24-P 6995

NEW!

14 | Circular Duct Fans

• EC motor, high level of efficiency • Low SFP values • 100% speed controllable• Can be installed in any position• Compact design• Low sound level

prioAir

prioAir ØA B C D ØE F150EC 149 412 312 40 187 211160EC 159 220 170 25 182 211200EC 199 245 195 25 227 249

Dimensions in mm.

B

CØ E

F

Ø A

Ø A

DD

Technical dataprioAir 150EC 160EC 200ECArt. no. 37356 36917 36380Voltage/Frequency V/50 Hz 230 1~ 230 1~ 230 1~Power W 77 77 117Current A 0.70 0.66 0.921Max. air flow m3/s 0.217 0.224 0.37SFP kW/(m3/s) 0.4

0,18 m3/s/150 Pa0.4 0.19 m3/s/150 Pa

0.4 0.29 m3/s/180 Pa

R.p.m. min-1 4320 4320 3463Max. temp. of transported air °C 55 55 55Sound pressure level at 3 m (20m2 Sabine) dB(A) 47 47 50Weight kg 1.7 1.6 2.4Insulation class, motor Iso B B BEnclosure class, motor IP 44 44 44

CasingThe air tight casing (tightness class C in acc. with EN12237:2003) is manufactured from special composite material.

MotorEnergy saving, high efficiency EC motor.

ImpellerAerodynamically optimized impellers and guide vanes.

Speed controlEasy to control by 0-10V signal.

Motor protectionMotor protection is integrated in the electronics of the motor.

More information at www.systemair.com.

Dimensions

Circular duct fans

Circular Duct Fans | 15

0

50

100

150

200

250

300

350

4000 200 400 600 800 1000 1200 1400

1355

8/13

560

5252

63

61

71

70

77

77

prio 200EC

Q [m³/s]

Ps

[Pa]

Q [m³/h]

P [W

]

0

100

200

1 4

1

4

0 0.05 0.1 0.15 0. .250

50

100

150

200

250

300

350

400

Q [m³/s]

Ps

[Pa]

0 100 200 300 400 500 600 700 800 900Q [m³/h]

1474

51 5

prio 150EC

0

50

100

P [W

]

2

5

0

100

200

300

4000 200 400 600 800

1399

9

0

50

100

Q [m³/s]

Ps

[Pa]

Q [m³/h]

prio 160EC

P [W

]

1 5

2

5

Performance


Space-saving: Thanks to its compact dimensions the circular duct fan matches the duct dimensions. A lean inline solution.

Efficient, compact, low-noiseprioAir

Lowest SFP values and very high efficiency.

Your advantage: Maximum performance and low energy consumption

Powerful EC motor with integrated electronics.

Your advantage: Reduced energy consumption reduces the running costs

Compact design. Your advantage: Less space required, a real inline fan

Material: Special composite material.

Your advantage: Lower weight, quick and easy installation

Low-noise

Long life

Clever: The optimised shape of the impeller enables an ideal air stream.

The most important advantages at a glance


High performance, low power consumptionSFP values and efficiency of prioAir

0 100 200 300 400 500 600 700 800 9000

140160180200220240260280300320340360

80

120100

604020

00

14

182022242628

0,20,40,60,8

11,21,41,61,8

22,22,42,62,8

33,23,4

4,2

SFP

(kW

/m3 /

s)

E (%

)

psf (

Pa)

qv (m3/h)

30

12108642

16

323436384042444648

4,44,6

3,84

3,6

prio 150EC

prio 200EC

0 100 200 300 400 500 600 700 800 9000

140160180200220240260280300320340360

80

120100

604020

00

14

182022242628

0,20,40,60,8

11,21,41,61,8

22,22,42,62,8

33,23,4

4,2

SFP

(kW

/m3 /

s)

E (%

)

psf (

Pa)

qv (m3/h)

30

12108642

16

323436384042444648

4,44,6

3,84

3,6

Efficiency (E) %

Fan curve

SFP (Specific Fan Power) (kW/m³/s)

prio 160EC

qv (m3/h)

20406080

100120140160180200220240260280300320340360380400

psf (

Pa)

00

5

10

15

20

25

30

35

40

45

50

0,20,40,60,8

11,21,41,61,8

22,22,42,62,8

33,23,43,63,8

4,24

SFP

(kW

/m3 /

s)

E (%

)

0 800 900 1000 1.100 1.200 1.300 1.400700600500400300200100


• High efficiency in all areas of the fan curve• 100 % speed controllable• Folded and air tight casing• Suitable for outdoor mounting and wet room

applications• Easy, vibration-free duct connection using FK

mounting clamps

Potentiometer 0-10V located in the electrical terminal box

K EC

40

øA

øAøB

CD

E

(F)

88

K ⌀A ⌀B C D E (F)100 EC 99 218 26 166 26 218125 EC 124 218 27 142 27 196160 EC 159 286 25 147 26 198200 EC 199 336 30 148 27 205250 EC 249 336 30.5 144.5 27 202315 M EC 314 408 32.5 160.5 27 220315 L EC 314 408 37.5 160.5 27 225

Dimensions in mm.

Technical dataK 100 EC 125 EC 160 EC 200 EC 250 EC 315 M EC 315 L ECArt. no. 16955 16956 2580 2581 2583 2584 2585Voltage V 230 1~ 230 1~ 230 1~ 230 1~ 230 1~ 230 1~ 230 1~Frequency Hz 50/60 50/60 50/60 50/60 50/60 50/60 50/60Power W 82.6 83 79.4 78.6 120 166 340Current A 0.69 0.68 0.63 0.63 0.92 1.14 2.08Max. air flow m3/s 0.0891 0.134 0.151 0.215 0.287 0.393 0.481R.p.m. min-1 3479 3308 3105 2468 2628 2113 2719Max. temp. of transported air °C 60 60 60 60 40 40 55“ when speed controlled °C 60 60 60 60 40 40 55Sound pressure level at 3 m (20m2 Sabine) dB(A) 49.8 46 47 51 45.6 50 57Weight kg 2.9 2.8 3.3 3.3 3.9 6 7.2Insulation class, motor Iso B B B B B B BEnclosure class, motor IP 54 54 44 44 44 44 44

CasingManufactured from galvanized sheet steel with the seams folded to give the fan a close to air tight casing.


ImpellerCentrifugal impeller with backward curved blades.

Speed control100 % speed controllable. The fans are delivered with a pre-wired potentiometer(0-10V) that allows you to easily find the desired working point.



Dimensions


0 0.03 0.06 0.090

200

400

600

800

Q [m³/s]

Ps

[Pa]

0 100 200 300Q [m³/h]

1348

0/13

481

43 49

75

77

K 100 EC

0

25

50

75

100

P [W

]

0 0.04 0.08 0.12 0.160

200

400

600

800

Q [m³/s]

Ps

[Pa]

0 100 200 300 400 500Q [m³/h]

1348

2/13

483

41 42

77

76

K 125 EC

0

25

50

75

100

P [W

]

Performance


New sileo version of duct fans K and KV

A new generation of modern Systemair duct fans which were developed and built consistently according to the company‘s set target: low noise level, high performance. Especially suited to all uses and areas of application sensitive to noise. You can see and hear the result: a reduction in sound of up to 50 % at the same system performance and an increased level of efficiency compared to its predecessors.


• High efficiency in all areas of the fan curve• 100% speed controllable• Low noise level• Motor and impeller are mounted on the access cover

for ease of maintenance• Installation in any position and easy, vibration-free

connection to spiral ducts using FK mounting clamps

KVO EC

KVO EC ⌀A B C D E F G H100 100 329 367 69 76 300 150 150125 125 329 367 84 72 300 150 150160 160 329 367 99 90 300 185 185200 200 419 466 123 109 435 220 220250 250 528 612 151 133 558 270 270315 315 614 700 183 164 615 344 260

Dimensions in mm.

øA

FD

EGH

BC

Technical dataKVO EC 100 EC 125 EC 160 EC 200 EC 250 EC 315 ECArt. no. 11542 11544 11545 11546 11547 11548Voltage V 230 1~ 230 1~ 230 1~ 230 1~ 230 1~ 230 1Frequency Hz 50/60 50/60 50/60 50/60 50/60 50/60Power W 60.4 111 116 123 312 331Current A 0.48 0.86 0.89 0.96 1.91 2.04Max. air flow m³/s 0.09 0.13 0.15 0.24 0.417 0.528Fan impeller speed r.p.m. 2499 2724 2411 2577 2799 2264Sound pressure level in 3 m (20m² Sabine) dB(A) 43 48 48 51 57 55Weight kg 5.6 5.6 6 10.3 20.4 25.6Insulation class, motor Iso B B F B F FEnclosure class, motor IP 44 44 44 44 44 44

CasingManufactured from galvanised sheet steel. The lid is insu-lated with 40 mm rockwool.


ImpellerKVO EC 100-160: Single-inlet centrifugal fan with forward curved blades KVO EC 200-315: Single-inlet centrifugal fan with back-ward curved blades

Speed control100% speed controllable (0-10V). The fans are delivered with a pre-wired potentiometer (0-10V) that allows you to easily find the desired working point.

Motor protection Motor protection is integrated in the electronics of the motor.



Dimensions


0 0.03 0.06 0.090

100

200

300

400

Q [m³/s]

[Pa]

0 100 200 300Q [m³/h]

1132

7/11

328

43 47

56

57

56

58

62

64

0

100

[W]

KVO 100 EC

0 0.04 0.08 0.12 0.160

100

200

300

400

500

[Pa]

0 200 400

1134

0/11

341

48 55

53

54

63

64

65

66

69

70

KVO 125 EC

0

30

60

90

120

[W

10V

4,5V

]

Q [m³/s]

Q [m³/h]

0 0.04 0.08 0.12 0.160

200

400

600

800

[Pa]

0 200 400

1131

7/11

318

49 48

5456

63

65

72

72

KVO 160 EC

0

30

60

90

120

[W]

Q [m³/s]

Q [m³/h]

0 0.1 0.2 0.30

200

400

600

800

[Pa]

0 300 600 900

1132

3/11

324

47 47

5861

65

69

72

75

0

40

80

120

160

[W]

KVO 200 EC

Q [m³/s]

Q [m³/h]

0 0.2 0.4 0.60

250

500

750

1000

Ps

[Pa]

0 400 800 1200 1600 2000

1133

8/11

339

5350

62

63

71

73

79

79

KVO 250 EC

0

100

200

300

400

P [W

]

Q [m³/s]

Q [m³/h]

0 0.2 0.4 0.60

250

500

750

1000

Ps

[Pa]

0 500 1000 1500 2000

1134

9/11

351

5255

66

70

76

79

81

83

0

100

200

300

400

P [W

]

KVO 315 EC

Q [m³/s]

Q [m³/h]

Performance


KD EC

• High efficiency in all areas of the fan curve • 100% speed controllable • Supplied with mounting bracket for easy installation• Easy, vibration-free connection to ducts using FK

mounting clamps

Technical dataKD EC 315E 355E 400E 400D 450D 500DArt. no. 11549 11560 11561 11564 11562 11563Voltage V 230 1~ 230 1~ 230 1~ 400 3~ 400 3~ 400 3~Frequency Hz 50/60 50/60 50/60 50/60 50/60 50/60Power W 428 355 926 1937 1872 1848Current A 1.98 1.69 4.08 2.99 2.91 2.83Max. air flow m3/s 0.963 1.05 1.93 2.35 2.57 2.77R.p.m. min-1 1723 1295 1452 1906 1607 1605Max. temp. of transported air °C 40 40 40 40 40 40“ when speed controlled °C 60 60 60 60 60 60Sound pressure level at 3 m (20m2 Sabine) dB(A) 72 53 62 74 69 68Weight kg 13 14 21.6 22.8 28.6 28.2Insulation class, motor Iso F F F F F FEnclosure class, motor IP 54 54 54 54 54 54

CasingManufactured from galvanized sheet steel.

MotorEnergy saving, high efficiency external rotor EC motor.

ImpellerMixed flow impeller which reduces the external di-mensions of the fans. High capacity in relation to their compact design.

Speed controlDelivered with a pre-wired potentiometer(0-10V) that allows you to easily find the desired working point.





KD EC 315E

KD EC 355E/400D/400E/450D/500D

KD EC øA øB øC øD øE F øG H I J K L M315E 315 302 315 355 455 49 10 484 25 53.5 89 534 9355E 355 - 355 400 503 40 10 516 - 38 97 583 9400 400 - 400 450 560 44 10 602 - 37 94 639 9450D 450 - 450 500 663 46 10 686 - 50 121 742 9500D 500 - 450 500 663 46 10 642 - 50 121 742 9

Dimensions in mm.

Dimensions


KD EC 315E KD EC 355E

73

KD EC 400D

10V

2,8V

KD EC 400E

10V

5,3V

KD EC 450D

10V

3,5V

KD EC 500D

Performance


• High efficiency in all areas of the fan curve• 100% speed controllable• Low sound level• Motor and impeller are mounted on the access cover

for ease of maintenance• Installation in any position and easy, vibration-free

connection to spiral ducts using FK mounting clamps

KVKE EC

Technical dataKVKE EC 125 160 200 250 315

Art. no. 2570 2571 2575 2577 2578Voltage V 230 1~ 230 1~ 230 1~ 230 1~ 230 1~Voltage/Frequency Hz 50/60 50/60 50/60 50/60 50/60Power W 68.7 67.8 156 265 308Current A 0.536 0.531 1.10 1.64 1.89Max. air flow m3/s 0.104 0.151 0.24 0.321 0.492R.p.m. min-1 3339 2592 3033 2821 2215Max. temp. of transported air °C 60 60 60 55 45“ when speed controlled °C 60 60 60 55 45Sound pressure level at 3 m dB(A) 41 39 46 49 47Weight kg 13.7 17 18.8 28.1 38.8Insulation class, motor Iso B B B B BEnclosure class, motor IP 44 44 44 44 44

D

EG

H

50

F27

C B

47

øA

*

*

KVKE EC ⌀A B C D E F G H125 125 433 479 125 128,5 442 246 470160 160 482 528 145.5 132.5 505 266 530200 200 482 534 150.5 149 505 303 530250 250 578 700 176 174 596 359 620315 315 680 802 208.5 207.5 705.5 430 730

Dimensions in mm.

CasingManufactured from galvanized sheet steel and thermally and acoustically insulated with a 50 mm layer of rock-wool with a surface liner which prevents the migration of fibres into the airstream.


ImpellerSingle inlet centrifugal fan with backward curved blades.

Speed controlThe fans are delivered with a pre-wired potentiometer (0-10V) that allows you to easily find the desired working point.

Motor protectionTo protect the motor from overheating, the fans have integral thermal contacts with automatic reset.



Dimensions


Performance

30 | Rectangular Duct Fans

RS EC

Technical dataRS 70-40 EC 80-50 EC 100-50 ECArt. no. 17824 17825 17826Voltage V 230 1~ 400 3~ 400 3~Frequency Hz 50/60 50/60 50/60Power W 605 2144 2724Current A 2.75 3.27 4.15Max. air flow m3/s 1.34 2.72 3.27R.p.m. min-1 1403 1509 1400Max. temp. of transported air °C 60 60 40Sound pressure level at 3 m dB(A) 60 66 68Weight kg 37 68.1 92.2Insulation class, motor Iso F F FEnclosure class, motor IP 54 54 54

• EC motor, high level of efficiency • 100% speed controllable • Integrated motor protection • Can be installed in any position• Potentiometer included for ease of commissioning

Smaller sizes coming soon!

RS A B C D E F G H I J K L M70-40EC 787 465 740 440 720 420 698 398 189 215 524 491 51880-50EC 882 580 840 541 820 520 798 498 182.5 191 644 614 638100-50EC 982 580 1040 540 1020 520 998 498 287 260 684 634 678

Dimensions in mm.

G (inside)E (c/c)

C

H (in

side

)F

(c/c

)DB

⌀10(8x)

M

I L

KJ

A

CasingManufactured from galvanized steel.


ImpellerImpellers with backward curved blades.

Speed controlThe fans are delivered with a pre-wired potentiometer (0-10V) which allows you to easily find the desired working point.




Dimensions

Rectangular duct fans

Rectangular Duct Fans | 31

0

100

200

300

400

5000 1000 2000 3000 4000 5000

1383

7/13

886

5763

88

0

200

400

600

800

Q [m³/s]

Ps

[Pa]

Q [m³/h]

RS 70-40EC

P [W

]

84

82

77

76

72

0

100

200

300

400

500

600

700

800

900

10000 2000 4000 6000 8000 10000

1399

5/13

996

6469

79

83

91

92

95

0

1000

2000

3000

Q [m³/s]

Ps

[Pa]

Q [m³/h]

RS 80-50EC

P [W

]

87

0

200

400

600

800

10000 3000 6000 9000 12000

1399

7/13

998

6470

81

85

88

92

95

98

0

1000

2000

3000

Q [m³/s]

Ps

[Pa]

Q [m³/h]

RS 100-50EC

P [W

]

Performance

32 | Rectangular Duct Fans

RSI EC

• EC motor, high level of efficiency • 100% speed controllable • Integrated motor protection • Can be installed in any position• Potentiometer included for ease of commissioning

Technical dataRSI 70-40EC 80-50EC 100-50ECArt. no. 17827 17828 17829Voltage V 230 1~ 400 3~ 400 3~Frequency Hz 50/60 50/60 50/60Power W 605 2144 2724Current A 2.75 3.27 4.15Max. air flow m3/s 1.34 2.72 3.27R.p.m. min-1 1403 1509 1400Max. temp. of transported air °C 60 60 40Sound pressure level at 3 m dB(A) 53 61 63Weight kg 72 113 147Insulation class, motor Iso F F FEnclosure class, motor IP 54 54 54

Smaller sizes coming soon!

ø10,0 (x8)

Gc/c E

CA

I

H c/c

FD B

O

J

L N

MO

K

~1200

RSI A B C D E F G H I J K L M N O70-40EC 808 564 741 441 720 420 697 397 55.5 114 787 202 170 532 59680-50EC 908 683 841 541 820 520 797 497 55.5 133 882 195 144 656 716100-50EC 1108 683 1041 541 1020 520 998 498 55.5 133 982 302 215 678 746

Dimensions in mm.


CasingManufactured from galvanized steel. Thermally and acoustically insulated with 50 mm mineral wool and perforated sheet steel on the inner surface.


ImpellerImpellers with backward curved blades.

Speed controlDelivered with a pre-wired potentiometer (0-10V) which allows you to easily find the desired working point.

Motor ProtectionMotor protection is integrated in the electronics of the motor.


Dimensions

Rectangular Duct Fans | 33

0

100

200

300

400

500

Q [m³/s]

Ps

[Pa]

0 1000 2000 3000 4000 5000Q [m³/h]

1383

7/13

840

52 57

70

75

74

79

79

84

RSI 70-40EC

0

200

400

600

P [W

]

0

100

200

300

400

500

600

700

800

900

10000 2500 5000 7500 10000

1399

5/14

005

62 75

78

82

92

84

90

92

0

1000

2000

3000

Q [m³/s]

Ps

[Pa]

Q [m³/h]

RSI 80-50EC

P [W

]

0

100

200

300

400

500

600

700

800

900

10000 3000 6000 9000 12000

1399

7/14

002

6168

78

82

86

89

93

95

0

1000

2000

3000

Q [m³/s]

Ps

[Pa]

Q [m³/h]

RSI 100-50EC

P [W

]

Performance

34 | Thermo Fans

• 100% speed controllable• Integrated electronic motor protection• Modular system• Flexible airflow direction due to removable panels

(MUB EC)• Low noise level• Installation in any mounting position• Safe and maintenance free operation

MUB EC

Technical dataMUB Mini MUB 025 315 EC 025 355 EC 042 400 EC 042 450 EC 042 450 ECArt. no. 33207 30676 30670 30209 30610 31380Techn. data is relating to 90° outlet 200 EC EC-A2 EC-A2 EC-A2 EC-A2 EC-A2-KVoltage V 230 1~ 230 1~ 230 1~ 230 1~ 400 3~ 230 1~Frequency Hz 50/60 50/60 50/60 50/60 50/60 50/60Power W 89.1 168 388 378 1055 597Current A 0.701 1.19 2.37 2.26 1.79 2.71Max. air flow m3/s 0.174 0.637 0.884 1.08 1.76 1.41R.p.m. min-1 3965 1694 1639 1339 1562 1297Max. temp. of transported air °C 40 60 60 60 60 60“ when speed controlled °C 40 60 60 60 60 60Sound pressure level at 3 m dB(A) 47 47 53 51 63 56Weight kg 8.1 29 29.5 45.5 52.5 52.5Insulation class, motor Iso B B B B F BEnclosure class, motor IP 44 44 44 44 54 54

MUB 042 500 EC 062 560 EC 062 630 EC 100 630 EC 100 710ECArt. no. 30314 30235 30207 34168 36379Techn. data is relating to 90° outlet EC-A2 EC-A2 EC-A2 EC-A2 EC-A2Voltage V 400 3~ 400 3~ 400 3~ 400 3~ 400 3~Frequency Hz 50/60 50/60 50/60 50/60 50/60Power W 1046 1976 2480 2924 6434Current A 1.69 3.05 3.80 4.30 8.96Max. air flow m3/s 1.93 3.00 3.57 4.96 7.45R.p.m. min-1 1340 1358 1209 1139 1205Max. temp. of transported air °C 60 60 60 60 40“ when speed controlled °C 60 60 60 60 40Sound pressure level at 3 m dB(A) 56 57 67 68 74Weight kg 56 101 96.5 167 199Insulation class, motor Iso B F F F FEnclosure class, motor IP 54 54 54 54 54

CasingConsists of an aluminium frame with fibreglass reinforced plastic corners of PA6; highly shock-resistant. Double skin panels manufactured from galvanized steel with 20 mm mineralwool insulation.

Motor Energy saving, high efficiency EC-external rotor motors.

ImpellerMUB EC: Impellers with backward curved blades, manufactured from aluminium. Mini MUB: Impellers with backward curved blades, manufactured from plastic PA6 25GV.

Speed controlAll models have one potential-free terminal for error message. Speed control by a 0-10V signal.



Thermo fans

Thermo Fans | 35

øE

�F

øD�C�B

�A

Mini MUB

MUB EC

MUB £A £B £C øD øE £F025 315EC-A2 500 500 420 315 200 40025 355EC-A2 500 500 420 355 224 40042 400EC-A2 670 670 590 400 253 40042 450EC-A2 670 670 590 454 286 70042 450EC-A2-K 670 670 590 450 286 70042 500EC-A2 670 670 590 504 321 70062 560EC-A2 800 800 720 560 360 70062 630EC-A2 800 800 720 630 407 70100 630EC 1000 1000 920 710 444 70100 710EC 1000 1000 920 806 470 73

Dimensions in mm.

Dimensions

36 | Thermo Fans

Straight through air direction

Performance

90° air direction

Thermo Fans | 37

90° air direction Straight through air direction

38 | Thermo Fans

MUB 062 560EC-A2


90° air direction

Thermo Fans | 39

0 1 2 3 4 5 60

200

400

600

800

1000

Q [m³/s]

Ps

[Pa]

0 5000 10000 15000 20000Q [m³/h]

1284

3

0

1000

2000

3000

P [W

]

MUB 100 630EC

51

1

5

0 1 2 3 4 5 60

200

400

600

800

Q [m³/s]

Ps

[Pa]

0 5000 10000 15000 20000Q [m³/h]

1284

2

MUB 100 630EC

0

1000

2000

3000

P [W

]

1

5

51

0 2 4 6 80

300

600

900

1200

Q [m³/s]

Ps

[Pa]

0 5000 10000 15000 20000 25000Q [m³/h]

1324

9

MUB 100 710EC

0

4000

8000

P [W

]

1 5

1

5

0 2 4 6 80

200

400

600

800

1000

1200

Q [m³/s]

Ps

[Pa]

0 5000 10000 15000 20000 25000Q [m³/h]

1324

8

MUB 100 710EC

0

4000

8000

P [W

]

1

1

5

5


90° air direction

40 | Thermo Fans

MUB/T EC

• 100% speed controllable • Up to 120°C medium temperature, continuous

operation • Pre-assembled isolator is standard • Low sound level • Motor outside the air stream

1

F E D C B

A

Zoll

MUB/T £A £B £C £D øE F025 355EC 500 500 420 378 355 224042 400EC 670 670 590 548 404 253042 450EC 670 670 590 548 454 286042 500EC 670 670 590 548 504 321062 560EC 800 800 720 676 570 361

Dimensions in mm.

Technical dataMUB/T 025 355EC 042 400EC 042 450EC 042 500EC 062 560ECArt. no. 34546 34545 34491 34538 34539Voltage V 230 ~1 230 ~1 400 ~3 400 ~3 400 ~3Frequency Hz 50/60 50/60 50/60 50/60 50/60Power at shaft W 313 549 827 1536 2274Current A 1.33 2.34 1.39 2.29 3.3Max. air flow m3/s 0.83 1.21 1.74 2.26 3.36R.p.m. min-1 1508 1512 1442 1504 1500Max. temp. of transported air °C 120 120 120 120 120Sound pressure level at 3 m dB(A) 42 44 47 49 52Weight kg 29 51 53 75 109Insulation class, motor Iso B B B B FEnclosure class, motor IP 55 55 55 55 55

Casing Consists of an aluminium frame with fibreglass reinforced plastic corners and double skin, galvanized steel panels with a 20 mm mineral wool insulation. Bottom panel is shaped as a grease tray and incorporates a pre-mounted 1” drain plug.


Impeller Impellers with backward curved blades, manufactured from aluminium.

Speed controlSpeed control by a 0-10V signal. Every motor has an output voltage of 10V for an external potentiometer or sensor. All models have one potential-free terminal for error message. Isolator switch is mounted on the casing.

Motor protectionIntegrated motor protection.


Dimensions

Thermo Fans | 41

MUB/T £A £B £C £D øE F025 355EC 500 500 420 378 355 224042 400EC 670 670 590 548 404 253042 450EC 670 670 590 548 454 286042 500EC 670 670 590 548 504 321062 560EC 800 800 720 676 570 361

Dimensions in mm.

0 0.2 0.4 0.6 0.8 10

100

200

300

400

Q [m³/s]

Ps

[Pa]

0 500 1000 1500 2000 2500 3000 3500Q [m³/h]

1206

3

MUB/T 025 355EC

0

200

400

P [W

]

0 0.25 0.5 0.75 1 1.250

100

200

300

400

5000 1000 2000 3000 4000

1206

1

MUB/T 042 400EC

0

200

400

600Q [m³/s]

Ps

[Pa]

Q [m³/h]

P [W

]

0 0.4 0.8 1.2 1.6 2 2.40

200

400

600

8000 2000 4000 6000 8000

1206

2

MUB/T 042 500EC

0

1000

2000

Q [m³/s]

Ps

[Pa]

Q [m³/h]

P [W

]

0 0.3 0.6 0.9 1.2 1.5 1.80

100

200

300

400

500

600

7000 1000 2000 3000 4000 5000 6000

1206

4

0

500

1000

MUB/T 042 450EC

0 0.5 1 1.5 2 2.5 3 3.50

200

400

600

800

10000 2500 5000 7500 10000 12500

1206

0

0

1000

2000

MUB/T 062 560EC

Performance

42 | Thermo Fans

KBR/KBT EC

• 100 % speed controllable • Integrated motor protection • Low noise level• Max. temp. of transported air 120°C

120°C

Technical dataKBR 280EC 315EC 315-L EC 355 EC 355EC-K 355EC-LKBT 160 180 200 225 250Art. no. 33396 33397 33653 33400 33398 33665 34785 34786 33231 34787 33259Voltage V 230 1~ 230 1~ 230 1~ 230 1~ 230 1~ 400 3~ 230 1~ 230 1~ 230 1~ 400 3~ 400 3~Frequency Hz 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60Power W 107 182 1268 498 296 2643 188 363 535 794 1252Current A 0.502 0.772 5.53 2.17 1.3 4.04 0.787 1.52 2.43 1.36 2.01Max. air flow m3/s 0.426 0.617 1.12 0.997 0.822 1.79 0.284 0.42 0.554 0.723 0.925R.p.m. min-1 1512 1512 3025 1495 1514 2626 1510 1504 1498 1387 1370Max. temp. of transported air °C 120 120 120 120 120 120 120 120 120 120 120Sound pressure level at 4/10 m dB(A) 30/22 26/18 38/30 32/24 24/16 41/33 29/21 32/24 36/28 39/31 37/29Weight kg 23 57 61 70 70 75 27 27.5 33 35 48Insulation class, motor Iso B F F B B F B B B B FEnclosure class, motor IP 55 55 55 55 55 55 55 55 55 55 55

Casing Manufactured from double-skinned galvanized steel and insulated with 50 mm mineral wool.


ImpellerKBR EC: Impellers manufactured from galvanized steel with backward-curved blades.KBT EC: Impellers manufactured from galvanized steel with forward-curved blades.

Speed control100% speed controllable (0-10V).



Thermo Fans | 43

DE

33C

B

5050L

J

G

A

130

78

38

H35

G

KBR A B C D E F øG H J K L M280EC 172 537 295 360 625 125 280 234 291 70 620 55315EC 188 600 339 398 690 125 315 249 307 70 770 55355EC 207 655 372 451 770 125 355 273 331 70 770 55

Dimensions in mm.

A

D

E

CB

HM

ØG

F

L

50 50ØG

K

J

38

KBT A B C D E F øG H J K L M

160EC 127 382 213 248 435 91 160 149 207 50 470 55

180EC 134 412 230 269 470 91 200 161 219 50 470 55

200EC 143 445 249 292 510 91 200 174 232 50 470 55

225EC 147 455 256 301 522 91 225 193 251 50 620 55

250EC 160 500 282 333 576 125 250 213 272 70 620 55Dimensions in mm.

Dimensions

KBR

KBT

44 | Thermo Fans

0 0.2 0.40

100

200

300

400

Q [m³/s]

Ps

[Pa]

0 300 600 900 1200 1500Q [m³/h]

9748

/975

2

5256

62

64

66

72

69

71

KBR 280EC

0

100

200

P [W

]

0 0.2 0.4 0.60

100

200

300

400

500

Q [m³/s]

Ps

[Pa]

0 400 800 1200 1600 2000 2400Q [m³/h]

8949

/977

2

58

5559

68

70

72

76

KBR 315EC

0

100

200

P [W

]

54

0 0.3 0.6 0.9 1.20

500

1000

1500

2000

Q [m³/s]

Ps

[Pa]

0 1000 2000 3000 4000Q [m³/h]

1070

1/10

702

62 65

72

77

80

83

89

92

KBR 315EC-L

0 0.25 0.5 0.75 10

200

400

600

800

Q [m³/s]

Ps

[Pa]

0 500 1000 1500 2000 2500 3000 3500Q [m³/h]

1069

9/10

700

55 56

62

66

73

75

78

81

KBR 355EC

0

200

400

600

P [W

]

0 0.3 0.6 0.90

200

400

600

Q [m³/s]

Ps

[Pa]

0 500 1000 1500 2000 2500 3000Q [m³/h]

1070

7/10

708

49 50

61

66

71

74

78

81

KBR 355EC-K

0

200

400

P [W

]

0 0.5 1 1.5 20

500

1000

1500

2000

Q [m³/s]

Ps

[Pa]

0 1000 2000 3000 4000 5000 6000 7000Q [m³/h]

1127

9/11

281

6063

78

7688

88

93

93

KBR 355EC-L

0

2000

4000

P [W

]

Performance

Thermo Fans | 45

0 0.05 0.1 0.15 0.2 0.25 0.30

50

100

150

200

250

300

Q [m³/s]

Ps

[Pa]

0 200 400 600 800 1000Q [m³/h]

1173

1

0

100

200

300

P [W

]

KBT 160EC

3634

41

44

56

50

58

56

0

50

100

150

200

250

300

350

Q [m³/s]

Ps

[Pa]

0 400 800 1200 1600 2000Q [m³/h]

8361

/836

2

59

63

66

71

73

77

76

81

KBT 200EC

0

300

600

P [W

]

0 0.1 0.2 0.3 0.4 0.50

50

100

150

200

250

300

Q [m³/s]

Ps

[Pa]

0 300 600 900 1200 1500Q [m³/h]

1172

6

0

150

300

450

P [W

]

KBT 180EC

3840

45

42

58

50

61

57

0

100

200

300

400

500

Q [m³/s]

Ps

[Pa]

0 500 1000 1500 2000 2500Q [m³/h]

1185

0

KBT 225EC

0

400

800

1200

P [W

]

0

100

200

300

400

500

600

Q [m³/s]

Ps

[Pa]

0 1000 2000 3000Q [m³/h]

8453

/845

4

54 60

74

67

75

82

79

86

KBT 250EC

0

1000

2000

P [W

]

46 | Roof Fans

TFSR/TFSK EC

• 100% speed controllable • Integrated isolation switch• The tilting mechanism simplifies cleaning and

maintenance. • Delivered with a connection box

TFSR TFSK

Technical dataTFSR/TFSK 160 EC 200 ECArt. no 1226/1223 1227/1224Voltage/Frequency V/50/60 Hz 230 1~ 230 1~Power W 81.5 74.6Current A 0.64 0.587Max. air flow m3/s 0.161 0.216R.p.m. min-1 3162 2501Max. temp. of transported air °C 45 45“ when speed controlled °C 45 45Sound pressure level at 10 m dB(A) 43 43Weight kg 4.3/4.7 5.4/6.2Insulation class, motor Iso B BEnclosure class, motor IP 44 44

TFSR A B C D HC160 EC 147 172 334 380 205200 EC 150 187 364 439 250HC= Hole diameter for fixing, ø6x4

Dimensions in mm.

TFSK A B øC £E c/cF160 EC 147 172 334 421 330200 EC 150 187 364 421 330

Dimensions in mm.

øC

HCøD

A B

øC

c/c Fø9(4x)

�E

A B36

CasingManufactured from powder-coated, galvanized steel sheet.


ImpellerCentrifugal fan with backward curved blades.

Speed controlDelivered with a pre-wired potentiometer (0-10V) that allows you to easily find the desired working point. The isolation switch is integrated.

Motor protectionTo protect the motor from overheating, the fans have integrated thermal contacts with automatic reset.


Dimensions

Roof fans

Roof Fans | 47

Performance

48 | Roof Fans

DVC/DVCI

Technical dataDVC/DVCI 190-S 225-P/225-S 315-P/315-S 355-P/355-S 400-P/400-S 450-PK/450-SK

Art. no. DVC-P/DVC-S 32569 30690/30667 30634/30619 30635/30620 30682/30622 31327/31427

Art. no. DVC-P+REV/DVC-S +REV 33095 30691/30725 30684/30585 30692/30621 30685/30623 –

Art. no. DVCI-P/DVCI-S 33034 30701/30693 30702/30694 30703/30695 30704/30696 33195/32744

Art. no. DVCI-P+REV/DVCI-S +REV - 30717/30709 30718/30710 30719/30711 30720/30712 –

Voltage/Frequency V/50/60 Hz 230 1~ 230 1~ 230 1~ 230 1~ 230 1~ 230 1~

Fan power consumption (P1) W 87.8 166 173 378 381 614

Current A 0.65 1.17 1.18 2.31 2.30 2.79

Max. air flow m3/s 0.197 0.261 0.546 0.918 1.00 1.43

R.p.m. min-1 3114 3278 1867 1657 1348 1300

Max. temp. of transported air °C 60 60 60 60 60 60

Sound pressure level at 4 m/10 m, DVC dB(A) 58/51 58/51 47/39 50/42 49/41 53/45

Sound pressure level at 4 m/10 m, DVCI dB(A) 58/51 54/46 41/33 46/38 43/35 40/32

Weight, DVC/DVCI kg 7.5/12 9.5/14 13/18 21/27.5 22/31 35/41

Insulation class, motor Iso B B B B B B

Enclosure class, motor IP 44 44 44 44 44 54

DVC/DVCI 450-P/450-S 500-P/500-S 560-P/560-S 630-P/630-S

Art no. DVC-P/DVC-S 30683/30626 30679/30628 30680/30630 30681/30632

Art no. DVC-P + REV/DVC-S + REV 30686/30627 30687/30629 30688/30631 30689/30633

Art no. DVCI-P/DVCI-S 30705/30697 30706/30698 30707/30699 30708/30700

Art no. DVCI-P + REV/DVCI-S + REV 30721/30713 30722/30714 30723/30715 30724/30716

Voltage/Frequency V/50/60 Hz 400 3~ 400 3~ 400 3~ 400 3~

Power W 1048 984 1873 2444

Current A 1.79 1.66 2.88 3.72

Max air flow m3/s 1.70 1.84 2.99 3.59

R.p.m. min-1 1558 1339 1359 1209

Max temp. of transported air °C 60 60 60 60

Sound pressure level at 4/10 m, DVC dB(A) 56/48 55/47 63/55 64/56

Sound pressure level at 4/10 m, DVCI dB(A) 50/42 51/43 55/47 57/49

Weight, DVC/DVCI kg 35/41 49/54 72/80 80/90

Insulation class, motor Iso B B F F

Enclosure class, motor IP 54 54 54 54

• 100 % speed controllable• Integrated motor protection• Low noise level• Safe and maintenance free operation

CasingManufactured from seawater-resistant aluminum, base frame galvanized steel. DVCI have 50 mm mineral wool insulation for low noise level.

MotorEnergy saving, high efficiency EC external rotor motors.

ImpellerCentrifugal fan with backward curved impellers manu-factured from polyamide PA 6 for size 190 and 315. From 355 up to 630 impellers manufactured from seawater resistant aluminium.

Speed controlTwo potentiometers in the electronics allow for 2 set values (day/night), one additional contact for an external setting. The DVC-P versions have integrated pressure sensors and the electronics are programmed for a pressure constant operation.



Roof Fans | 49

DVC/DVCI-S £A £B C øD £E £F G H øI190-225 370/497 295 170/179 213 335 245 105 6xM6 10(4x)315 560/690 470 330/369 285 435 330 146 6xM6 10(4x)355-400 720/874 618 390/439 438 595 450 200 6xM6 10(4x)450-500 900/968 730/748 465/479 438 665 535 237 6xM8 12(4x)560-630 1150/1315 960 560/600 605 939 750 293 8xM8 14(4x)

Dimensions in mm.

DVC/DVCI-P £A £B £C D £E £F G H øK øI315 470 340 560/690 392.5 435 330 146 6xM6 285 10(4x)355-400 618 420 720/874 454 595 450 200 6xM8 438 12(4x)450-500 730/748 560 900/968 516 665 535 237 6xM8 438 12(4x)560-630 960/988 740 1150/1315 565 939 750 293 6xM8 605 14(4x)

Dimensions in mm.

�A�B

C

øD�E

�FG M20x1,5

G

øI(4x)

H

øD

H

M20x1.5

I

K

GG

F

E

D

BA

C

Dimensions

DVCI 315- + REV

Roof fan with EC motor

I = insulated version

Impeller diameterS = standard versionP = integrated pressure controller

Isolator switch included

Ordering code

50 | Roof Fans

DVC/DVCI 225 1Ph/230V)

DVC/DVCI 190

DVC/DVCI 3151Ph/230V)


DVC/DVCI 4001Ph/230V)

DVC/DVCI 450-PK/-SK1Ph/230V)

----- = only S-version


Performance

Roof Fans | 51







----- = only S-version ----- = only S-version

52 | Roof Fans

• Integrated pressure sensor, independent from power

• Temperature sensor for outdoor temperature compensation

• Multipurpose LC display and keyboard• 100 % speed controllable• Integrated motor protection• Safe and maintenance free operation• Sizes 315 up to 500 include a tilting device (FTG)

for service options

DVC/DVCI POC + FTG CasingCasing from seawater-resistant aluminum, base frame from galvanised steel. DVCI have 50 mm mineral wool insulation for low noise level.

MotorEnergy saving, high efficiency EC-external rotor motors.

ImpellerBackward curved impellers manufactured from poly-amide PA 6 for size 315. From 355 up to 630 impellers manufactured from seawater resistant aluminium.

Speed control100 % speed controllable. Integrated pressure sensors and temperature sensor for outdoor temperature com-pensation.



Technical dataDVC POC+FTG 315 355 400 450-K 450 500DVC POC 560 630Art. no. DVC

DVCI32953 33633

32954 33587

32955 33634

32957 33635

32956 33636

32958 33637

32959 33638

32960 33639

Voltage/Frequency V/50/60 Hz 230 1~ 230 1~ 230 1~ 230 1~ 400 3~ 400 3~ 400 3~ 400 3~Power W 173 378 381 580 1048 984 1873 2444Current A 1.18 2.31 2.3 2.79 1.79 1.66 2.88 3.72Max air flow m3/s 0.546 0.918 1 1.83 1.7 1.84 2.99 3.59R.p.m. min-1 1867 1657 1348 1250 1558 1339 1359 1209Max temp. of transported air °C 60 60 60 60 60 60 60 60“when speed controlled °C 60 60 60 60 60 60 60 60Sound pressure level, 4 m dB(A) 47 50 49 53 56 55 63 64Sound pressure level, 10 m dB(A) 39 42 41 45 48 47 55 56Weight kg 16 27 30 45 45 57 72 80Insulation class, motor Iso B B B B B B B FEnclosure class, motor IP 44 44 44 54 44 54 54 54

Technical data is relating to DVC.

Roof Fans | 53

H

M20x1,5

I

K

G_

G__

F

B

A

CDL

E

Dimensions

DVC POC £A £B C D £E £F G H øI øK L315 560 470 330 393 435 330 146 6xM6 10(4x) 285 443355 720 618 390 454 595 450 200 6xM6 12(4x) 438 504400 720 618 390 475 595 450 200 6xM8 12(4x) 438 525450K/450/500 900 730 465 530 665 535 237 6xM8 12(4x) 438 580560/630 1150 955 560 600 939 750 293 8xM8 14(4x) 605 -

Dimensions in mm.

DVCI POC £A £B C D £E £F G H øI øK L315 690 470 330 393 435 330 146 6xM6 10(4x) 285 443355 874 618 390 454 595 450 200 6xM6 12(4x) 438 504400 874 618 390 475 595 450 200 6xM8 12(4x) 438 525450K/450/500 968 748 465 530 665 535 237 6xM8 12(4x) 438 580560/630 1315 1035 560 600 939 750 293 8xM8 14(4x) 605 -

Dimensions in mm.

Ordering code

DVCI 225-POC + FTG

Roof fan with EC motor

I = insulated version

Impeller diameter

Integrated pressure and tem-perature sensor for outdoor compensation

Tilting device is included

54 | Roof Fans

0 0.15 0.3 0.45 0.6Q [m³/s]

0

150

300

450

600

Ps

[Pa]

0 500 1000 1500 2000Q [m³/h]

5835

/583

6

DVC/DVCI 315-POC + FTG

0

100

200

P [W

]

0 0.3 0.6 0.9 1.2Q [m³/s]

0

150

300

450

600

Ps

[Pa]

0 750 1500 2250 3000 3750Q [m³/h]

5828

/582

9


0

200

400

P [W

]

0 0.3 0.6 0.9 1.2Q [m³/s]

0

150

300

450

600

Ps

[Pa]

0 1000 2000 3000 4000Q [m³/h]

5837

/583

8


0

200

400

P [W

]

0 0.4 0.8 1.2 1.6Q [m³/s]

0

150

300

450

600

Ps

[Pa]

0 1500 3000 4500Q [m³/h]

7231

DVC/DVCI 450-K-POC + FTG

0

400

800

P [W

]

Performance

Roof Fans | 55

0 0.5 1 1.5 2Q [m³/s]

0

200

400

600

800

Ps

[Pa]

0 1500 3000 4500 6000Q [m³/h]

5966

/596

7


0

600

1200

P [W

]

0 0.5 1 1.5 2Q [m³/s]

0

200

400

600

800

Ps

[Pa]

0 1500 3000 4500 6000Q [m³/h]

5969

/597

0


0

600

1200

P [W

]

0 0.8 1.6 2.4 3.2Q [m³/s]

0

200

400

600

800

Ps

[Pa]

0 2500 5000 7500 10000Q [m³/h]

5977

/597

8

DVC/DVCI 560-POC

0

1000

2000

P [W

]

0 1 2 3 4Q [m³/s]

0

200

400

600

800

Ps

[Pa]

0 3000 6000 9000 12000Q [m³/h]

5974

/597

5

DVC/DVCI 630-POC

0

1500

3000

P [W

]

56 | Axial Fans

AW sileo EC

• 100% speed controllable • Electric connection via terminal box mounted

on the motor• Inlet protection guard • Safe and maintenance free operation • Installation in any mounting position

Technical dataAW sileo 200EC 250EC 300EC 350EC 400EC 450EC 500EC 500D ECArt. no. 35854 35855 35857 35859 35860 35863 35865 35866Voltage V 230 1~ 230 1~ 230 1~ 230 1~ 230 1~ 230 1~ 230 1~ 400 3~Frequency Hz 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60Power W 60 83 170 165 140 345 750 980Current A 0.53 0.72 1.35 1.35 1.15 2.2 3.4 1.6Max. air flow m3/s 0.278 0.475 0.883 1.04 1.13 1.82 2.57 2.89R.p.m. min-1 2820 2330 2245 1475 1080 1300 1420 1610Max. temp. of transported air °C 60 60 60 60 60 60 60 60Sound pressure level at 1 m dB(A) 57 67 62 58 55 60 67 70Weight kg 3 3.7 6.1 6.5 8.9 10.5 14.7 16.5Insulation class, motor Iso B B F B B B B BEnclosure class, motor IP 54 54 54 54 54 54 54 54

AW sileo 560D EC 630D EC 710D-L EC 800D EC 1000D ECArt. no. 35867 35872 35876 35879 35899Voltage V 400 3~ 400 3~ 400 3~ 400 3~ 400 3~Frequency Hz 50/60 50/60 50/60 50/60 50/60Power W 945 3200 2830 2980 2603Current A 1.5 5 4.3 4.5 4Max. air flow m3/s 3.18 5.89 6.89 7.76 9.72R.p.m. min-1 1360 1510 1260 1090 969Max. temp. of transported air °C 60 65 60 65 70Sound pressure level at 1 m dB(A) 70 79 78 73 78Weight kg 21.8 41.8 42.9 52.5 61.2Insulation class, motor Iso B F B B FEnclosure class, motor IP 54 54 54 54 54

CasingSquare wall plate made from galvanized steel and com-pletely powder coated in black (RAL9005). The protec-tion guard at the inlet side is powder coated in black.

MotorEnergy saving, high efficiency EC-external rotor motors.

ImpellerManufactured from fiber-reinforced Plastic (PP) with metal core. The impeller is balanced dynamically in two levels in accordance with DIN ISO 1940 part 1, quality G6.3.

Speed controlThe power electronics is integrated in the motor casing/terminal box. The input voltage for single phase units can vary between 200 and 240V. Speed control by a 0-10V signal.



Axial fans

Axial Fans | 57

AW sileo oA B B2 B3 B4 ØD1 ØD4 oL200 EC 260 52 6 127 18 203 7 312250 EC 320 57 6 132 22 260 7 370300 EC 380 80 11 157 11 327 9 430350 EC 435 80 12 157 11 388 9 485400 EC 490 98 12 175 20 419 9 540450 EC 535 100 14 209 - 468 11 576500 EC 615 120 16 181 5 517 11 656500D EC 615 120 16 181 8 517 11 656560D EC 675 135 16 208 6 576 11 725630D EC 750 150 20 287 - 696 11 805710D-L EC 810 170 20 275 2 772 14.5 850800D EC 910 190 17 267 1 857 14.5 9701000D EC 1110 225 20 277 12 1063 14.5 1170

Dimensions in mm.

AL

BB2 B4

D1

B3

D4

0 0.05 0.1 0.15 0.2 0.25 0.30

20

40

60

80

100

120

140

Q [m³/s]

Ps

[Pa]

0 200 400 600 800 1000Q [m³/h]

1298

8/12

989

AW sileo 200 EC

0 0.1 0.2 0.3 0.4 0. .60

20

40

60

80

100

120

140

160

Q [m³/s]

Ps

[Pa]

0 500 1000 1500 2000Q [m³/h]

1298

7/12

990

AW sileo 250 EC

Dimensions

Performance

58 | Axial Fans

0 0.3 0.6 0. .20

20

40

60

80

100

Q [m³/s]

Ps

[Pa]

0 1000 2000 3000 4000Q [m³/h]

1230

0/12

993

AW sileo 400 EC

0 0.5 10

20

40

60

80

100

120

140

160

Q [m³/s]

Ps

[Pa]

0 1000 2000 3000 4000 5000 6000 7000Q [m³/h]

1230

2/12

994

AW sileo 450 EC

0 0.5 1 1.5 2 2.0

20

40

60

80

100

120

140

160

180

200

220

Q [m³/s]

Ps

[Pa]

0 2500 5000 7500 10000Q [m³/h]

1230

4/12

996

AW sileo 500 EC

0 0.5 1 1.5 20

20

40

60

80

100

120

140

160

180

200

220

240

Q [m³/s]

Ps

[Pa]

0 3000 6000 9000Q [m³/h]

1230

5/12

995

AW sileo 500D EC

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0. .90

20

40

60

80

100

120

140

160

Q [m³/s]

Ps

[Pa]

0 500 1000 1500 2000 2500 3000Q [m³/h]

1229

7/12

991

AW sileo 300 EC

0 0.3 0.6 0. .20

20

40

60

80

100

120

Q [m³/s]

Ps

[Pa]

0 1000 2000 3000 4000Q [m³/h]

1229

9/12

992

AW sileo 350 EC

Axial Fans | 59

0 0.5 1 1.5 2 2.5 30

20

40

60

80

100

120

140

160

180

200

220

Q [m³/s]

Ps

[Pa]

0 3000 6000 9000 12000Q [m³/h]

1230

6/12

997

AW sileo 560D EC

0 1 2 3 40

20406080

100120140160180200220240260280300320

Q [m³/s]

Ps

[Pa]

0 5000 10000 15000 20000Q [m³/h]

1231

1/12

998

AW sileo 630D EC

0 1 2 3 4 5 60

20

40

60

80

100

120

140

160

180

200

220

240

260

280

Q [m³/s]

Ps

[Pa]

0 5000 10000 15000 20000 25000Q [m³/h]

1231

5/12

999

AW sileo 710D-L EC

0 1 2 3 4 5 60

20

40

60

80

100

120

140

160

180

200

220

240

260

280

300

Q [m³/s]

Ps

[Pa]

0 10000 20000Q [m³/h]

1231

8/13

000

AW sileo 800D EC

0 2 4 60

20

40

60

80

100

120

140

160

180

200

220

Q [m³/s]

Ps

[Pa]

0 10000 20000 30000Q [m³/h]

1232

3/12

573

AW sileo 1000D EC

60 | Smoke Extract Fans

DVG EC

• Normal ventilation and smoke and heat extract unit (dual use)

• Up to 400°C/120 min. (F400/120, F400/90, F300, F200)

• Normal ventilation up to 120°C continuous operation, up to 80°C in standby (when the fan doesn`t operate)

• Horizontal (DVG-H) exhaust or vertical exhaust (DVG-V)

• Modbus control possible• Fire mode integrated

DVG-V

DVG-H

CasingManufactured from seawater resistant aluminium. The base frame consists of galvanised steel.


ImpellerBackward curved blades; manufactured from galvanised steel.

Speed control100% speed controllable.

Motor protectionIn the case of fire switch to fire mode where the bridging of motor protection devices is necessary.


Technical dataDVG H 355EC

F400H 450EC F400

H 560EC F400

H 630EC F400

H 800EC F400

V 355EC F400

V 450EC F400

V 560EC F400

V 630EC F400

V 800ECF400

Art. no. 95251 95252 95253 95254 95255 95256 95257 95135 95136 95137Voltage V 230 1~ 230 1~ 400 3~ 400 3~ 400 3~ 230 1~ 230 1~ 400 3~ 400 3~ 400 3~Frequency Hz 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60Power (P1) W 400 925 2420 5065 4865 400 925 2490 5055 4790Current A 1.8 4 3.7 8 7.7 1.8 4 3.8 8 7.7Max. air flow m³/s 0.903 1.72 3.64 5.33 7.67 0.861 1.61 3.42 5.06 6.97R.p.m. 1/min 1500 1450 1400 1455 930 1500 1450 1400 1465 930Max. temp. of transp. air °C 120 120 120 120 120 120 120 120 120 120* when speed-controlled °C 120 120 120 120 120 120 120 120 120 120Max. temp. of transp. air 120 min. °C 400 400 400 400 400 400 400 400 400 400Sound pressure level at 4 m dB(A) 59 67 75 78 81 56 65 72 75 74Sound pressure level at 10 m dB(A) 53 60 69 72 72 50 58 67 69 66Weight kg 41 53 101 110 192 43 57 106 115 199Insulation class, motor Iso F F F F F F F F F FEnclosure class, motor IP 54 54 54 54 54 54 54 54 54 54

Smoke extract fans

Smoke Extract Fans | 61

Dimensions

�B

(n x M)ødf

A

øE

H

�A

H1

F

Max 240

ød

DVG £A £B øE F G ød ødf (n x M) H1 H355 EC 598 450 12 1003 704 400 438 (6xM8) 30 567450 EC 668 535 12 1261 854 400 438 (6xM8) 30 637560 EC 943 750 14 1540 1078 560 605 (8xM8) 30 773630 EC 1039 840 14 1573 1072 630 674 (8xM8) 40 858800 EC 1255 1050 14 2024 1280 800 872 (8xM8) 40 999

Dimensions in mm.

A

H

G

B

øE

ødf (nxM)

Max 240

H1A

ød

DVG-VDVG-H

62 | Smoke Extract Fans

Performance

0 0.25 0.5 0.75 10

100

200

300

400

5000 1000 2000 3000

Q [m³/s]

Ps

[Pa]

Q [m³/h]

DVG-H 355EC/F400

0 0.5 1 1.5 20

200

400

600

8000 2000 4000 6000

Q [m³/s]

Ps

[Pa]

Q [m³/h]

DVG-H 450EC/F400

0 1 2 3 40

250

500

750

10000 4000 8000 12000

Q [m³/s]

Ps

[Pa]

Q [m³/h]

DVG-H 560EC/F400

0 2 4 60

300

600

900

12000 5000 10000 15000 20000

Q [m³/s]

Ps

[Pa]

Q [m³/h]

DVG-H 630EC/F400

0 2 4 6 80

250

500

750

1000

Q [m³/s]

Ps

[Pa]

0 5000 10000 15000 20000 25000Q [m³/h]

DVG-H 800EC/F400

0 0.25 0.5 0.75 10

100

200

300

400

5000 1000 2000 3000

Q [m³/s]

Ps

[Pa]

Q [m³/h]

DVG-V 355EC/F400

Smoke Extract Fans | 63

0 0.5 1 1.5 20

200

400

600

800

Q [m³/s]

Ps

[Pa]

0 2000 4000 6000Q [m³/h]

DVG-V 450EC/F400

0 1 2 3 40

250

500

750

10000 4000 8000 12000

Q [m³/s]

Ps

[Pa]

Q [m³/h]

DVG-V 560EC/F400

0 2 4 60

300

600

900

12000 5000 10000 15000 20000

Q [m³/s]

Ps

[Pa]

Q [m³/h]

DVG-V 630EC/F400

0 2 4 6 80

250

500

750

10000 5000 10000 15000 20000 25000

Q [m³/s]

Ps

[Pa]

Q [m³/h]

DVG-V 800EC/F400

Syst

emai

r AB

• Oct

ober

201

4 • E

8261

www.systemair.com

fans with ec motor - systemair · pdf filefans | air handling units ... plus dehumidifiers....

Documents