fastening accessories - ramos srl · ctr 23 round hole clip 23 35.8 34.7 7.0 9.1 20.0 type 5 6 -...
TRANSCRIPT
FASTENING ACCESSORIES are made to hold wire harnesses to the sheet metal of a vehicle to prevent them from moving.
Delfingen offers various fastening types in sizes from 0.7 mm to 2.5 mm. These fasteners can be used in oval or round hole openings and
All our sites are ISO TS16949 and ISO 14001 certified
accommodate various sheet metal thicknesses.
FASTENING ACCESSORIES are designed to fit over Delfingen convoluted tubes such as Soflex, Techniflex and the GAFMIL™ tubings and they are also compatible with our branching accessories.
FASTENINGACCESSORIES
Fittings
TR Clips are designed to fasten convoluted tubes to sheet metal through a round hole.
TR Clips snap and close directly onto the tube and the round anchor clasp is simply pushed in the hole.
Reference Description A (mm) B (mm) C (mm) D (mm) E (mm) Fastening mode X (mm)
CTR 9 Round hole clip 9 20.9 20.0 7.0 7.4 20.0 Type 5 6 - 6,5
CTR 13 Round hole clip 13 26.0 24.6 7.0 7.1 20.0 Type 5 6 - 6,5
CTR 19 Round hole clip 19 31.8 29.8 7.0 9.3 20.0 Type 5 6 - 6,5
CTR 23AR Round hole clip 23 AR 35.8 34.7 7.0 9.1 20.0 Type 5 6 - 6,5
24.3 22.6 7.1 7.5 20.0 Type 6 8
CTR 13TR8 Clip 13 TR8 25.6 24.8 7.0 8.1 20.0 Type 6 8
CTR 16TR8 Clip 16 TR8 29.2 26.6 7.0 8.9 20.0 Type 6 8
CTR 19TR8 Clip 19 TR8 31.5 30.4 7.0 8.9 20.0 Type 6 8
Clip 11 TR8CTR 11TR8
CTR 4.5 Round hole clip 4.5 11.8 11.8 6.2 6.2 20.0 Type 5 6 - 6,5
CTR 23 Round hole clip 23 35.8 34.7 7.0 9.1 20.0 Type 5 6 - 6,5
Round hole clip 23 AR
TR CLIPS
TRA CLIPS
Note: This accessory is only available in PA6 material. Other materials can be used upon request.
TRA Clips are similar to the TR range but with a lighter design.
TRA Clips meet the same requirements as the previous fastener.
Reference Description A (mm) B (mm) C (mm) D (mm) E (mm) F (mm)
CTRA 6 Round hole clip 6 12.8 16 6.7 20 20.5 6
CTRA 11 Round hole clip 11 20.2 19.6 6.7 22 28.5 7
CTRA 16 Round hole clip 16 24.9 21.85 6.7 24 32.5 8
Characteristics
HG Clips are similar to TR Clips but they are made with a stronger fastening design, a larger shell to hold onto the tube, and a larger oval button clasp.
*This clip can adjust a 3 mm-thick sheet.
Reference Description Ø A (mm) B (mm) Fastening mode
CHG6 Clip HG 6 14 26 Type 8
CHG6P Clip HGP 6* 14 26 Type 8
CHG9 Clip HG 9 17.5 32 Type 8
Clip HG 11 20.5 32 Type 8
CHG13 Clip HG 13 23 32 Type 8
CHG16 Clip HG 16 25.5 32 Type 8
CHG19 Clip HG 19 29 32 Type 8
CHG23/26 Clip HG 23/26 33 32 Type 8
CHG29 Clip HG 29 40.6 32 Type 8
CHG23 Clip HG 23 33 32 Type 8
CHG11
HG CLIPS
Note: This fastening accessory can be delivered in A16 boxes (300x200x120 mm) or in other sizes upon request.
Characteristics
Slide bar clasps are designed to fit on other Delfingen accessories like tee fittings, collars, elbows, branching cross fittings and Y fittings. They are simply assembled with a sliding mechanism.
Ref. Description A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) Fastening type
PF-AR Round anchor clasp 14.0 4.0 8.0 20.0 11.0 21.0 16.5 Type 5
PF-SR Round christmas tree clasp 16.0 4.0 8.0 20.0 11.0 21.0 16.5 Type 7
PF-SB Christmas tree button hole clasp 11.7 4.0 26.4 17.0 11.0 25.5 16.5 Type 9
PF-AB Christmas tree button hole clasp 11.7 4.0 26.4 17.0 11.0 21.0 16.5 Type 8
PF-GG Slide bar clasp - 4.3 - - 14.2 22.7 10.5 Type 2
SLIDE BAR CLASP
Del
finge
n_FA
STEN
ING
_AC
CES
SORI
ES_v
2.1
Type 1 & 2 Type 3
Type 5 & 7
Type 6
Type 8,9,10 &11 Type 12
Type DescriptionType 0 No slide bar
Type 1 Slide bar
Type 2 Double slide bar
Type 3 3 spigots
Type 4 Type 1 + Type 8
Type 5 Ø 6.2 - 6.5 anchor spigot
Type 6 Ø 8 anchor spigot
Type 7 Ø 6.2 - 6.5 Christmas tree spigot
Type 8 Oblong anchor spigot // wiring harness
Type 9 Oblong Christmas tree spigot // wiring harness
Type 10 Oblong anchor spigot ┴ wiring harness
Type 11 Oblong Christmas tree spigot ┴ wiring harness
Type 12 On stud/screw
FASTENING ACCESSORIES can be delivered in A12 boxes (400x300x290mm) or in A16 boxes(300x200x120mm). Other sizes available upon request.
Materials and fastening accessories have a good resistance to ultraviolet degradation and fungus as well as good chemical resistance.
Characteristics Specification PA 6.6
Mechanical Properties
Density (g/cm³) ISO 1183 1.14
Breaking strength (MPa) ISO 527 65
Breaking elongation (%) ISO 527 65
Thermal Properties
Min/Max continuous operating temperature (°C) - -30° / 125°
Maximum peak operating temperature (°C) - 150
Flammability FMVSS 302 Complies
PA 6
1.10
60
>45
-30° / 125°
150
Complies
Fastening types& materials
Corporate Headquarters:
Delfingen Industry S.A. • Rue Emile Streit, 25340 Anteuil, France
Tel: +33 (0)3 81 90 73 00 • [email protected] www.delfingen.com
Data & photos for information only, subject to modifications without notice.
BRAZIL CHINA FRANCE HONDURAS INDIA ITALY JAPAN KOREA MOROCCO MEXICO PHILIPPINES PORTUGAL ROMANIA SLOVAKIA THAILAND TUNISIA TURKEY USA