feasibility study fate 2010-09-09 0.001. fate_feasibility_study / peter karlsson2 general project...
TRANSCRIPT
![Page 1: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/1.jpg)
Feasibility Study Fate2010-09-09 0.001
![Page 2: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/2.jpg)
Fate_Feasibility_study / Peter Karlsson 2
General Project name: Fate
Customer: Nokia
PCC Site / Design center: CPH,
Project type:
Type of Product:
Ramp-up:
Customer
LOM
Lifetime:
Customer plant focus:
LOM plant focus:
Volumes:
Total volume
Global peak volume
Number of sales items / assemblies
Needed technologies
![Page 3: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/3.jpg)
Fate_Feasibility_study / Peter Karlsson 3
Fate
B-Cover
A-Cover(Side Keys)(Display Gasket)(Earpiece)
C-Cover(Metal insert)(AV)(DC)(GPS)(WLAN)
UI Key
Resistive Touch Window
Display
Engine PWB(Camera)
Battery
Screws(x4-6)
Antenna Carrier(IHF)
![Page 4: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/4.jpg)
Fate_Feasibility_study / Peter Karlsson 4
–Touch panel • Assembly technology:
–Display Window• Assembly technology: Adhesive
–Window-adhesive • Assembly technology: Adhesive
–A Cover • Assembly technology:
–A-cover Inner • Assembly technology: ultra sonic welding
A-cover assembly
Display Window
Window Adhesive
Touch panel
A Cover Inner
A-cover
![Page 5: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/5.jpg)
Fate_Feasibility_study / Peter Karlsson 5
Part Name: Touch panel
Part 3D Version: XXXX
Material: Resistive
Cosmetic: Back printed
Secondary Operations:Back printed,
Main Technologies:
General Part Information
Major Risks Identified
![Page 6: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/6.jpg)
Fate_Feasibility_study / Peter Karlsson 6
Part Name: Display Window
Part 3D Version: XXXX
Material: Sheet window?
Cosmetic:
Weight / Vol.
Secondary Operations:
Main Technologies: Milled?
General Part Information
Major Risks Identified
![Page 7: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/7.jpg)
Fate_Feasibility_study / Peter Karlsson 7
Part Name: Window Adhesive
Part 3D Version: XXXX
Material:
Weight / Vol.
Secondary Operations:
Main Technologies: Die Cut
General Part Information
Major Risks Identified
![Page 8: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/8.jpg)
Fate_Feasibility_study / Peter Karlsson 8
Part Name: A Cover
Part 3D Version: XXXX
Material plastic: PC/ABS
Decoration: Black, Whit High gloss
Weight / Vol.
Secondary Operations:Painting
Main Technologies:
General Part Information
Major Risks Identified
![Page 9: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/9.jpg)
Fate_Feasibility_study / Peter Karlsson 9
Part Name: A Cover insert
Part 3D Version: XXXX
Material: PC/ABS
Decoration:
Weight / Vol.
Secondary Operations:Ultra sonic welding
Main Technologies: Moulding
General Part Information
Major Risks Identified
![Page 10: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/10.jpg)
Fate_Feasibility_study / Peter Karlsson 10
–B-Cover • Assembly technology:
B-cover assembly
![Page 11: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/11.jpg)
Fate_Feasibility_study / Peter Karlsson 11
Part Name: B-Cover
Part 3D Version: XXXX
Material: PC/ABS 5% Teflon
Cosmetic: Painted, Soft touch
Weight / Vol.
Secondary Operations:
Main Technologies: Injection moulding
General Part Information
Major Risks Identified
![Page 12: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/12.jpg)
Fate_Feasibility_study / Peter Karlsson 12
C-Cover investigation
The concept for C-cover is not fixed.Just now there are three different types of C-Cover assembly.
Type 1: 2K, Insert moulded metal, three LDS Antennas
Type 2: 1K, Insert moulded metal, Main antenna assy LDS, Sheet metal GPS
and Wlan antenna
Type 3: 2K, Assembled (heat staked) metal insert, three LDS antennas
![Page 13: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/13.jpg)
Fate_Feasibility_study / Peter Karlsson 13
–C-Cover • Assembly technology:
–Camera Gasket• Assembly technology: Adhesive
–Camera window• Assembly technology: Adhesive
–Camera Window Adhesive• Assembly technology: Adhesive
–????• Assembly technology:
–????• Assembly technology:
C-cover assembly Type 1
![Page 14: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/14.jpg)
Fate_Feasibility_study / Peter Karlsson 14
Part Name: C-Cover
Part 3D Version: XXXX
Material First Shot: Grivory GVX-5H ??
Material Second Shot: PC/ABS Xantar LDS 3711
Insert Material: SUS 305 ½ H t=0,3 ??
Cosmetic: Painted (Masking for metal and connector areas)
Weight / Vol.
Secondary Operations:LDS, Plating
Main Technologies: 2K moulding, Insert moulding
General Part Information
Major Risks Identified
1. Plating. The metal insert can be a problem in plating. The cupper and nickel will be plated onto the metal.
2. LDS. The antennas is placed in both ends of the cover.Connection areas and pattern must be carefully planed to fit in LDS machine.
3. Painting. Metal and connection areas must be protected when painting.
![Page 15: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/15.jpg)
Fate_Feasibility_study / Peter Karlsson 15
–C-Cover • Assembly technology:
–Main antenna• Assembly technology: snap on
–Wlan antenna• Assembly technology: Heat staking
–GPS antenna• Assembly technology: Heat staking
–Camera Gasket• Assembly technology: Adhesive
–Camera window• Assembly technology:
–Camera window adhesive• Assembly technology:
–Camera window• Assembly technology:
–????• Assembly technology:
–????• Assembly technology:
–????• Assembly technology:
C-cover assembly Type 2
Wlan antenna
GPS antennaCamera Window
Camera Window adheive
Main antenna LDS
Camera Gasket
C-cover
![Page 16: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/16.jpg)
Fate_Feasibility_study / Peter Karlsson 16
Part Name: C-Cover
Part 3D Version: XXXX
Material: Grivory GVX-5H ??
Insert Material: SUS 305 ½ H t=0,3 ??
Cosmetic:
Weight / Vol.
Secondary Operations:
Main Technologies: Insert moulding
General Part Information
Major Risks Identified
![Page 17: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/17.jpg)
Fate_Feasibility_study / Peter Karlsson 17
Part Name: Main Antenna
Part 3D Version: XXXX
Material: PC/ABS Xantar LDS 3711
Cosmetic: Painted, Moss II
Weight / Vol.
Secondary Operations: LDS
Main Technologies: moulding
General Part Information
Major Risks Identified1. Connection areas must be
masked when painting.
![Page 18: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/18.jpg)
Fate_Feasibility_study / Peter Karlsson 18
Part Name: Sheet metal GPS Antenna
Part 3D Version: XXXX
Material: SUS
Cosmetic:
Weight / Vol.
Secondary Operations: Heat staking, Selective Plating
Main Technologies: Stamping
General Part Information
Major Risks Identified1. Visible under battery cover
Can it be hided?Coloured?
Selective Au platingat connecting spring
![Page 19: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/19.jpg)
Fate_Feasibility_study / Peter Karlsson 19
Part Name: Sheet metal Wlan Antenna
Part 3D Version: XXXX
Material: SUS
Cosmetic:
Weight / Vol.
Secondary Operations: Heat staking, Selective Plating
Main Technologies: Stamping
General Part Information
Major Risks Identified1. Visible under battery cover
Can it be hided?Coloured?
Selective Au platingat connecting spring
![Page 20: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/20.jpg)
Fate_Feasibility_study / Peter Karlsson 20
–C-Cover • Assembly technology:
–Camera Gasket• Assembly technology: Adhesive
–Camera window• Assembly technology: Adhesive
–Camera window adhesive• Assembly technology: Adhesive
–Camera window• Assembly technology: Adhesive
–Metal insert• Assembly technology: Heat stake
–????• Assembly technology:
–????• Assembly technology:
C-cover assembly Type 3
Camera Window
Camera Window adheive
Camera Gasket
Metal insert
-over
![Page 21: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/21.jpg)
Fate_Feasibility_study / Peter Karlsson 21
Part Name: C-Cover
Part 3D Version: XXXX
Material First Shot: Grivory GVX-5H ??
Material Second Shot: PC/ABS Xantar LDS 3711
Cosmetic: Painted (Masking for connector areas)
Weight / Vol.
Secondary Operations:LDS, Plating
Main Technologies: 2K moulding, Insert moulding
General Part Information
Major Risks Identified
• LDS. The antennas is placed in both ends of the cover.Connection areas and pattern must be carefully planed to fit in LDS machine.
• Painting. Connection areas must be protected when painting.
LDS Main Antenna
LDS Wlan Antenna
LDS GPS Antenna
![Page 22: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/22.jpg)
Fate_Feasibility_study / Peter Karlsson 22
Part Name: Sheet metal Insert
Part 3D Version: XXXX
Material: SUS 1/2H
Cosmetic:
Weight / Vol.
Secondary Operations: Heat staking
Main Technologies: Stamping
General Part Information
Major Risks Identified1. Is it strong enough?
![Page 23: Feasibility Study Fate 2010-09-09 0.001. Fate_Feasibility_study / Peter Karlsson2 General Project name:Fate Customer:Nokia PCC Site / Design center:CPH,](https://reader036.vdocuments.net/reader036/viewer/2022062516/56649e195503460f94b056ee/html5/thumbnails/23.jpg)