felted projects

7/28/2019 Felted projects

1/13

7/28/2019 Felted projects

2/13

http://images.search.yahoo.com/images/view?back=http%3A%2F%2Fimages.search.yahoo.com%2Fsearch

%2Fimages%3Fp%3Dfree%2Bfelt%2Bpatterns%26rs%3D0ni%253D20%26b%3D161%26ni

%3D20%26xargs%3D0%26pstart%3D1%26fr%3Dyfp-t-

376&w=650&h=488&imgurl=www.crafts4kids.com%2Fprojects%2F1200%2F1206%2FHO1206-

1_LG.jpg&rurl=http%3A%2F%2Fwww.crafts4kids.com%2Fprojects

%2F1200%2F1206%2F1206_1.htm&size=29KB&name=do+not+have+adob...&p=free+felt+patterns&oid=8c1a84efcf3b62adf2f48b3bdacea7e6&fr2=&no=164&tt=65900&b=161&ni=20&sigr=11o9gvq36&sigi=1

1m7o16vu&sigb=13nirj2lp&.crumb=An8LeHjEZpF

7/28/2019 Felted projects

3/13

Instructions:

1. Cut out patterns. Use pencil to trace onto construction paper cutting out the number

indicated on the pattern.

2. Fill the bag with crumpled newspaper. Close the top then fold it over two times.Squeeze a bead of Tacky glue under the fold then press to secure, holding with tape if

needed till dry.

3. Layer papers for wings and body as shown then use the Glue Stick to glue together.4. Pin the felt patterns onto the felt then cut out the indicated number. Use Tacky Glue toadhere in place on body and wings.

5. Glue a wiggle eye to the center of the smaller eye round. Let dry. Use scissors to snip

paper around the entire eye. Fold up sections.6. Start the flow of the brown Paint Marker following label instructions. Use the marker

to detail the wing sections, body sections, claws, and around the larger section of the eye.

7. Use Tacky Glue to adhere the wings in place at sides on front of the bag. Add glue tothe top half of the body and press in place on the front of the bag. Glue the eyes, feet, and

ears in place. Let dry.

*FREE* Felt Food Pattern!

7/28/2019 Felted projects

4/13

This is a follow up to all the wonderful comments and requests for a pattern for my felt

play food. This is a free pattern, made by me, for a sandwhich and a bag of chips. Right-click the following three images and select "Save Target As" and save to your desktop.

Then from there you can print these images full size.

7/28/2019 Felted projects

5/13

Basically the construction on these is pretty simple. Everything was handstitched usingembroidery thread matching the color to the felt. I only used two threads of the

embroidery thread in most cases and I used a blanket stitch on everything. the only

exceptions to this are the chips and the chip bag. I whip stitched the yellow circle and

white line onto the red bag but I did a blanket stitch to attach the two bag pieces together.**NOTE:You could add a little velcro to the opening of the chip bag if you want it to "close". However, Idid not.

Potato Chips and Bag:

The chips were the only thing that were not handsewn. The chips were made by firsttaking one sheet of felt and cutting it in half to make two sheetsthat measured 6"x 9".

Then I placed them together and loaded the sewing machine up with a matching thread

7/28/2019 Felted projects

6/13

color. Then I placed the presser foot along on edge. I sewed vertically following the short

(6") end. After I sewed that first line, then I moved the presser foot and placed it up

against the first line and used that line as a guide. I continued until the entire sheet wasstitched with evenly spaced lines. Using this method the stitch lines end up being about

1/4" apart. Then I used the chip pattern (the cutout shape from the pattern sheet) and laid

it on top of the stitched sheet of felt and started cutting. You want to make sure your linesrun vertically and are centered correctly on the chip (see the pattern drawing for a rough

guide). Because the felt has all the stitching, the chips can be "curled" to look like real

ruffle chips!!

Sandwich:For the sandwich, cut 4 pieces of felt for the white bread parts. I wrote on the pattern tocut two strips of dark brown felt in a 14" long by 1/2" wide strip. In order to do this and

get it to fit on one sheet of felt, you will have to cut it out on the diagonal. It will take two

pieces of felt to do just this part. But don't be discouraged! Save those scraps! They willcome in handy for future felt projects I am sure.

Blanket stitch the brown strip onto one side of the white bread part. You can start in themiddle of the bottom of the piced of bread or you can do what I did which is start in one

of the indented parts of the side. When you go to handstitch the second white bread piece

on, leave an opening large enough to stuff batting in. I just used regularPoly-fil. Try not to

overstuff it or you will get puffy, swollen looking bread.

Swiss Cheese:

This was pretty simple. I just blanket stitched the holes first (it is easier to hide yourstarter stitches that way). The I stitched the two cheese pieces together along the outside.

That's it!

Lettuce:

I blanket stitched the outside first. Then I hand basted the main "vein" going from one

end to the other. Make sure that you get a good secure knot to start. Then when I got tothe other end of the lettuce, I pulled the thread to get the rippled effect. Don't pull too

tight, it doesn't take much to get the ripple effect. I added a few more veins coming out

from the main one also using a hand sewn basting stitch but those were decorative and Idid not pull those tight. Do what you feel looks best. Some of the veins may need to be

pulled a bit to get the lettuce effect that you like best. Having the rippled effect with the

basting stitches and not leaving the lettuce flat really gives the lettuce a realistic look and

gives it a more three-dimensional look.

Tomato:This was one of the harder components of the sandwich. I recommend cutting out theparts with an Exacto knife. The tomato consists of three parts. The back is red, the middle

is pink, and the top is the red cutout piece. First whip-stitch the red cutout piece onto the

pink piece but only stitch the middle parts NOT the outside edge. Then I just stitchedsome "seeds" using the same read embroidery thread that I just stitched the pieces

together with. Then put the back red piece on and blanket stitch the pieces together.

7/28/2019 Felted projects

7/13

Other Sandwich Parts:

The rest of the parts were all just blanket stitched except for the peanut butter and jelly.Those were a single piece of felt cut out using the pattern.

Felt Needlebook

By: Molly Kozera of A Bit O'ShineTop of Form

Bottom of Form

Bottom of Form

Does your mom sew, quilt, embroider or need an occasional needle? Give your Mom ahomemade felt needlebook this Mother's Day to help keep track of needles. You can

embellish the book with a variety of appliques. Project designed by Molly Kozera.

Materials:

Eco Felt (1 color for book, 1-3 colors for applique)

ButtonFelt glue stick

Needle and thread

scissorsInstructions:

For the first one I started with a rectangle of eco-felt that, when folded up, would fit

comfortably in the hand yet not something so small it would get lost in a quilting bag(you can see the measurements on the grid).

7/28/2019 Felted projects

8/13

And for aesthetics I trimmed the corners off the side that will make the closure.

Once you've got your size figured out and how it will close, sew on the button and sew onany appliques. I did hearts for this one and I recommend using a felt glue to stick them on

before you stitch around them, just so they stay in place evenly and don't end up crooked

like mine. :)

7/28/2019 Felted projects

9/13

I stitched around each heart all the way to give them a "poufy" sort of look and to make

sure they were securely attached.

Now that you know how big your book is, cut the rectangles that will make the "pages"

of the book. I recommend five pages - two to line the covers and three that will be loose.

Using a felt-glue I adhere a piece to the inside of each cover - this will add some

thickness and help stiffen it while it also covers the stitches from your button andapplique.

And don't forget to cut your button hole! :)

You can also cut your cover support as one chunk it just so happened I forgot to do that

with this one. Each book I make ends up completely different, but they all work.

7/28/2019 Felted projects

10/13

I like leaving just a bit of space between my interior cover and the outside edge.

Carefully line up the three interior pages and close the cover - now you're ready to stitch

the whole thing together!

For all my stitching I use embroidery floss that I've divided in half. The regular size is acombination of six indivual threads...

7/28/2019 Felted projects

11/13

and dividing it will give you three - still strong but easier to work with and doesn't look

so bulky.

The first needlebook I made I hid my knots inside the last page and the back cover, but Ifound it made my binding really uneven, so if you are more expert in this area than

myself (and that wouldn't take much!) it keeps your cover nice and clean. This time

around I put my needle through back to front and made a series of six stitches like so...

7/28/2019 Felted projects

12/13

My subsequent stitches placed so as to cover my knot. I think it was easier! My finished

needlebooks made using only supplies on hand (woohoo destash-along!):

Some variations I made:

Instead of making the front cover have a huge flap I used an extra scrap to make thiswhich I adhered using felt glue and then stitched to secure.

I put my stitches on an angle. And don't worry they weren't this big or horribly spacedthat's just as well as I can draw using MSPaint.

7/28/2019 Felted projects

13/13

Another variation was to make a pocket in the back for storing those long needle things

(you can tell I know what I'm doing when I use terms like that) or maybe a small pair of

scissors. I simply cut my piece extra long, then folded it up and stitched the sides

together.

This piece is glued to the back as the back cover support.

There you have it! No more losing a needle in the carpet and finding it with your foot! Or

going to a quilting group and digging around your bag thinking don't I have needles in

here somewhere? Ow, ow, ow. Found them.Happy stitching!

http://www.favecrafts.com/Painting