ficha tÉcnica ffp2 - 3 capas datasheet desechable
TRANSCRIPT
FICHA TÉCNICADATASHEET
MASCARILLASHALF MASKS
FFP2 - 3 CAPAS DESECHABLE
DescripciónDescription
La mascarilla FFP2 - 3 CAPAS DESECHABLE ofrece una protección eficaz ante virus, bacterias, polvo y polen.
Su diseño tridimiensional, con puente ajustable, le permite adaptarse de manera segura al contorno de la cara en todas las direcciones.
CaracterísticasCharacteristics
The FFP2 - 3 LAYERS DISPOSABLE mask offers effective protection against viruses, bacteria, dust and pollen.
Its three-dimensional design, with adjustable bridge, allows a safely adaptation to the contour of the face in all directions.
FiltroFilter
InstruccionesInstructions
Embalaje Packaging
Avda de la Fama, 121-123 I 08940 Cornellà de Llobregat (Barcelona) I Tel. +34 931 275 634 I [email protected] I www.ilumax.es
Gracias al material no tejido en 3 capas se consigue una eficacia de filtración superior al 95%:
La primera capa de polipropileno absorbe el gas caliente exhalado por el cuerpo.
La segunda capa de tela permite un filtrado vírico y bacteriano seguro.
La tercera capa de tela no tejida hilada de polipropileno puede bloquear eficazmente objetos visibles como gotas.
La mascarilla posee dos bandas elásticas que garantizan la correcta sujeción. Además, su diseño cómodo y traspirable hacen de ella una solución confortable.
Thanks to the 3-layer non-woven material, a filtration efficiency of over 95% is achieved:
The first layer of polypropylene absorbs the hot gas exhaled by the body.
The second textile layer allows a safe bacterial and viral filtreation.
The third layer of spun polypropylene nonwoven effectively blocks visible objects such as drops.
The mask has a double band for the correct hold. In addition, its comfortable and breathable design make it an optimal solution.
FFP2. Filtration efficiency > 95%FFP2. Eficacia de filtración > 95%
50 unidades por caja. Dimensiones: 20x11x5,5cm 50 pieces with box. Dimensions: 20x11x5.5 cm
ImágenesImages
REFERENCIA FFP2 - 3C
Avda de la Fama, 121-123 I 08940 Cornellà de Llobregat (Barcelona) I Tel. +34 931 275 634 I [email protected] I www.ilumax.es
Verification No.: CPGD20031222253
CERTIFICATE OF COMPLIANCE
Applicant:
Address of Applicant:
Trade Mark:
Product Name: DISPOSABLE FACE MASK
Model No.:
Test Standard(s): EN 149: 2001+A1:2009
Test report(s): TPGD20031222253
Date of issue: Mar. 26, 2020
Date of Expiry: Mar. 25, 2025
In accordance with the following Applicable Directives:
The Personal Protective Equipment Regulation (EU)2016/425
Conclusion
The referred test report(s) show that the product complies with standard(s) recognized as giving
presumption of compliance with the essential requirements.
The CE marking as shown below can be affixed on the product after preparation of necessary
technical documentation.
Other relevant Directives have to be observed.
Approved by: Hermann Weiher
Form QAT_10-M04, version 00, effective since March 6th, 2020
Ente Certificazione Macchine Srl
Via Ca’ Bella, 243 – Loc. Castello di Serravalle – 40053 Valsamoggia (BO) - ITALY
+39 051 6705141 +39 051 6705156 [email protected] www.entecerma.it Ce
rtific
ate
– C
ер
тиф
ика
т – 證明書
– C
ert
ific
at
– 증명서
–ة
ادشه
Certificate of Compliance No. 0P200327S.GFL0C43
Technical Construction File no. TPGD20031222253
Certificate’s
Holder:
Certification ECM
Mark:
Product:
Model(s): DISPOSABLE FACE MASK
Trade Mark:
Verification to: Standard:
EN 149: 2001+A1:2009
related to CE Directive(s):
R 2016/425 (Personal Protective Equipment)
Remark: This document has been issued on a voluntary basis and upon request of the manufacturer. It is our
opinion that the technical documentation received from the manufacturer is satisfactory for the
requirements of the ECM Certification Mark. The conformity mark above can be affixed on the products
accordingly to the ECM regulation about its release and its use.
Additional information and clarification about the Marking:
The manufacturer is responsible for the CE Marking process, and if necessary, must refer
to a Notified Body. This document has been issued on the basis of the regulation on
ECM Voluntary Mark for the certification of products. RG01_ECM rev.3 available at:
www.entecerma.it
Issuance date: 27 March 2020
Expiry date: 26 March 2025
Reviewer
Technical expert
Amanda Payne
Approver
ECM Service Director
Luca Bedonni
European
Conformity
Type
Approved