ICN # 00-032858

Model NGGC-312 PL-01

Series DynaCeptor™

FILTER CARTRIDGE

SPECIFICATION DATA SHEET

APPLICATION

CARTRIDGE FOR NATURAL GAS SERVICE USED TO COALESCE AEROSOL LIQUIDS. TYPICALLY USED IN REVERSE FLOW COALESCER STYLE VESSEL SUCH

AS PECO 77V OR COMPETITORS.

FEATURES / BENEFITS

PEACH SATURATED DEPTH TECHNOLOGY COALESCER.

INTERNAL CARTRIDGE DRAINAGE SLEEVE ON BOTTOM CAP TO PREVENT AERSOLS DRAINING FROM RE-ENTRAINING IN GAS STREAM

ADVANCED TECHNOLOGY DEPTH FILTER THAT PROVIDES A RIGID STRUCTURE THAT MAINTAINS AN OPEN POROSITY AND PERMEABILITY FOR

FLOW.

ROBUST DESIGN LESS SUSCEPTIVE TO RUPTURE DURING SLUG FLOW CONDITIONS.

HELICAL FLOW PATH FORCES THE GAS TO TAKE A LONGER PATH THROUGH THE ELEMENT THUS INCREASING THE CONTAMINANTS CHANCES OF

IMPACTING FIBERS AND COALESCING.

PEACH TECHNOLOGY GAS COALESCERS TYPICALLY OPERATE AT A LOWER DIFFERENTIAL PRESSURE THEN TRADITIONAL DEPTH MICROGLASS OR PLEATED MICROGLASS COALESCERS. THIS EQUATES TO LOWER OVERALL ENERGY COSTS.

SPECIFICATIONS

4.50” OD X 2.9” ID X 12.00”L NOMINAL DIMS

PEACH ADVANCED TECHNOLOGY DEPTH FILTER MADE USING POLYESTER PECO ENGINEERED MEDIA (PEM)

POLYESTER OUTSIDE DRAINAGE LAYER

EXPANDED METAL SUPPORT

304 STAINLESS STEEL TOP CAP CLOSED WITH SILICONE SEAL NUT

POLYESTER BOTTOM CAP; OPEN W/ ELEMENT DRAINAGE SLEEVE AND VITON FLAT GASKET SEAL

OPERATING PARAMETERS

MAXIMUM OPERATING TEMPERATURE 240°F / 115.6°C RECOMMENDED CHANGE-OUT DIFFERENTIAL PRESSURE 10-15 psid / .69-1.0 bar MAXIMUM ALLOWABLE DIFFERENTIAL PRESSURE OF CARTRIDGE 25 psid / 1.7 bar

DO NOT EXCEED MAXIMUM ALLOWABLE DIFFERENTIAL PRESSURE OF THE VESSELS ELEMENT SUPPORT PLATE.

STANDARD FLOW DIRECTION: INSIDE TO OUTSIDE

PARTICLE RETENTION 99.5% LIQUIDS AT 0.3 MICRON BASED ON CAGI ADF 400-1999

99.99% OF ALL SOLID PARTICLES 0.3 MICRON AND LARGER

PACKAGING 4 / BOX

Phone 940-325-2575 ● www.pecofacet.com ● Email sales@pecofacet.com

The enclosed information is the property of PECOFacet and is furnished in confidence solely for the purpose of evaluating PECOFacet technology. It is not to be

copied, communicated or distributed without the expressed written consent of PECOFacet. The information presented above is based on internal data that is

believed to be as accurate as possible. However, PECOFacet shall not be liable for any misuse or misrepresentation of the product. Its intended use is to be a guide

for sales, distributors and customers in order to understand the performance and construction of PECOFacet cartridge. Dimensions presented are nominal and

include +/- tolerances. Performance Rating is based on PECOFacet standard testing protocol.

Last Update 08/22/2014

FS-89-SL-01 (LHA 12/03)

A45 (1143)57 (1148)69 (1753)69 (1753)

E2 (50)2 (50)2 (50)2 (50)

C39 (991)51 (1295)63 (1600)63 (1600)

F9 1/8 (232)9 1/8 (232)9 1/8 (232)11 1/8 (283)

Nominal Dimensions in Inches / (mm)

G9 1/4 (235)9 1/4 (235)9 1/4 (235)10 1/4 (260)

H9 1/4 (235)9 1/4 (235)9 1/4 (235)10 1/4 (260)

J14 (356)26 (660)38 (965)38 (965)

MODEL89-1-312-6-27589-1-324-6-27589-1-336-6-27589-1-336-8-275

INLETOUTLET2 (50)2 (50)2 (50)3 (76)

B13 (330)13 (330)13 (330)13 (330)

SHELL DIA.6 5/8 (168) O.D.6 5/8 (168) O.D.6 5/8 (168) O.D.8 5/8 (219) O.D.

Vessels are designed and stamped in accordance with ASME pressure vessel code for 275 PSIG at 100˚ F without corrosion allowance.

CL

SHELL DIA.

1/2" PDI

1/2" LG

1" EQUALIZERF.S.

1/2" PDI

1" HLSD

1" HLSD

1/2" VENT

1/2" LG

F B.C.D.

1" DRAINF.S.

OUTLET

AJ

RE

Q'D

FO

R

EL

EM

EN

T R

EM

OV

AL

C

12

"

12

"

B1

2"

8"

2" E

NAME PLATE

(4 EA.) 7/8" DIA.BOLT HOLES LOCATEDAT 45˚ OFF VESEEL

CL

G H

0˚

VENT

PDI

PDI

LG

180 ˚

225 ˚

315 ˚ 45 ˚

135 ˚

90 ˚270 ˚

BOLT HOLECL BOLT HOLECL

CL

HLSD

NAMEPLATECL

EQUALIZERDRAIN

OUTLET INLET

REDUCER

E L E V A T I O N

T R U E O R I E N T A T I O N

®

Please refer to www.perryequipment.com for most current literature edition.

Corporate Offices & PlantPERRY EQUIPMENT CORPORATIONWolters Industrial ParkP.O. Box 640Mineral Wells,Texas 76068Telephone: 940-325-2575

800-877-PECOTelefax: 940-325-4622 e-mail: mwsales@perryequipment.com

Houston Branch Office1758 West Sam Houston Parkway N.Houston,Texas 77043-3115Telephone: 713-973-2575Telefax: 713-467-0475e-mail: houstonsales@perryequipment.com

Perry EquipmentItaliana S.R.L.via Camozzi, 10624121 Bergamo (BG)ItalyTelephone: 3903-523-6340Telefax: 3903-523-6380e-mail: italysales@perryequipment.com

Perry Equipment De MéxicoParque Industrial Benito JuárezAcceso III, 4-AQuerétaro, Querétaro, México C.P. 76120Telephone: 52-42-10-34-89Telefax: 52-42-10-90-39

Parque Industrial QuerétaroCalle Cerrada La Noria #108Santa Rosa JaurequiQuerétaro, Querétaro, México C.P. 76220e-mail: mexicosales@perryequipment.com

Perry EquipmentCorporationS.E. ASIA REGIONAL OFFICE35-4 Jalan SP2/1Taman Serdang Perdana, Seksyen2,43300 Seri KembanganSelangor D.E., MalaysiaTelephone: 603-8941-2366Telefax: 603-8941-1366e-mail: asiasales@perryequipment.com

Peco Filters, Ltd.1351 Hastings Crescent S.E.Calgary, AlbertaCanada T2G-4C8Telephone: 403-243-6700Telefax: 403-287-9304e-mail: canadasales@perryequipment.com

European OfficesPERRY EQUIPMENT LTD.Brunel Business CourtBrunel Way, ThetfordNorfolk 1P24 1HPEnglandTelephone: 01842 821000Telefax: 01842 821050e-mail: uksales@perryequipment.comwww.perry-equipment.co.uk

e-mail:elements@perryequipment.com

web site:www.perryequipment.com

Printed in USA

P E R RY E Q U I P M E N T C O R P O R AT I O N

Oil & Gas Vessels

ISO 9001 S e r i e s 8 9

C o a l e s c i n g

F i l t e r

®

C o a l e s c i n g

E f f i c i e n c y a t

E c o n o m i c

P r i c e s

U t i l i z i n g

P E AC H® G a s

C o a l e s c i n g

F i l t e r

E l e m e n t s

E N G I N E E R E D F I L T R A T I O N T E C H N O L O G I E S

PECO SERIES 89 Coalescing Fi l ter product l ine .Quality and economy with the PEACH® advantage

Series 89 Coalescing

Filter, Economical

Coalescing Utilizing

the PEACH®

Ultra-High Efficiency

Coalescing Elements.Available from stock.

The Series 89 Coalescing Filter

Product line has been designed

to offer the greater solids &

liquids removal efficiencies

demanded by today’s users,

at affordable prices. Utilizing

standard designs that meet

most customer requirements,

the Series 89 Coalescing Filter

is available from stock for quick

delivery. The Series 89

Coalescing Filter

uses Series NGGC

Coalescing Filter

Elements for

enhanced

performance

and dirt holding

capacities.

O R D E R I N G

S I Z I N G I N F O R M A T I O N

Number of Elements

Element Type(4.5” outer

diameter by 36”length)

Design Pressure

(psig)

1 275

NominalShell

Diameter(Inches)

336 6

For information on replacement elements, please refer to brochure EL-NGGC-TD-01.

SeriesNumber

SP

EC

IFIC

GR

AV

ITY

, AIR

=1.0

0

CO

RR

EC

TIO

N F

AC

TO

RS

TEMPERATURE [OF]

.50

.60

.70

.80

.90

1.00

.90

1.00

1.10

1.20

1.30

1.40

1.50

40˚ 80˚ 120˚ 160˚ 200˚ 240˚ 280˚

FLOW RATE, SCFH [ NG @ SG = .065 & 60 Deg. F ]DP is 1.2 PSID or less

OP

ER

AT

ING

PR

ES

SU

RE

PS

IG

0

20

40

60

80

100

120

140

160

180

200

0 20,000 40,000 60,000 80,000 100,000 120,000 140,000 160,000 180,000 200,000 220,000 240,000

89-1-312-6-275

89-1-324-6-275

89-1-336-6-275

89-1-336-8-275

89-1-540-10-275

(1) If vapor phase is other than natural gas of 0.65 specifygravity at 60˚F and 14.7 PSIA, correct to theseconditions using the PECO conversion chart to the left:

Find the maximum operating temperature on the horizontalscale. Follow temperature on the horizontal scale. Followtemperature line vertically until it intersects with the specificgravity line.The correction factor is then found horizontallyto the right of this intersection.

(2) Multiply the flow rate (SCFH) by the correction factor.

(3) Determine the PECO Series 89 required by enteringsize chart (below) at minimum operating pressure.Move right to the intersection with the corrected maximum gas flow line.The PECO Series 89 required is indicated by the slanted line to the right of the intersection. Sizing is based on a maximum pressuredrop of 60” in H2O across the entire unit.

89

Technical Data SheetEL-NGGC-TD-01

P E R RY E Q U I P M E N T C O R P O R AT I O N

ISO 9001

Series NGGCLiquid Aerosol Coalescing Elements

PECO introduces the next generation in PEACH®

Gas Coalescer Technology. The Next Generation Gas Coalescer features an advanced proprietar ymedia blend, an element support design, and a new proprietar y end cap design. The result is a coalescer that can handle a wide variety of liquid loading conditions in air and gas applications.

Operational Data• Standard Flow Direction Inside-to-outside of element• Micron Ratings

Liquids: 0.3 micron and largerSolids: 0.3 micron and larger

• Maximum Operating Temperature 180º F / 82º C

• Recommended Element Change Out Differential Pressure 10 - 15 psid

The NGGC features a user friendly Integral End Seal.

ConstructionStandard Optional

• Media/Outer Cage/End Caps Polyester Polypropylene • Gaskets Viton

Elements are designed to fit PECO Vessel Series 77V.Competitive retrofits available.

EL-NGGC-TD-01 (LHA 10/03)

Nomenclature

The Conical Helix

The NGGC utilizes patented PEACH® technology. It consists of several lateral sections of var ying sizes. Each lateral sectionconsists of multiple helical wrapped layers. As the spiral layers are applied they conform to the previous layer forming a cone —thus developing a conical helix.

Specification Data Model

NGGC - 312

NGGC - 324

NGGC - 336

Length OD

12"

24"

36"

4.5"

4.5"

4.5"

ID

2.95"

2.95"

2.95"

• Proprietary media blend for excellent performance.

• Element support cage provides strong structural strength.

• Top end cap, with integral seal, provides better sealing around center bolt.

• Top end cap, with integral seal, eliminates use of dimple washer and provides ease of use during element change-out.

• Proprietary bottom end cap distributes gas flow throughout the element to better utilize the entire element matrix.

• Proprietary bottom end cap provides an area of low velocity to facilitateliquid drainage.

PRODUCTADVANTAGES

• All synthetic construction*

• Can be fully incinerated

• Light weight

* PECO housing models only

DISPOSALADVANTAGES

336

DIMENSIONSOD x LENGTH

312 = 4.5” X 12”324 = 4.5” X 24”336 = 4.5” X 36”

MISCELLANEOUS

NGGC

PRODUCT LINENext GenerationGas Coalescer

MEDIANo Symbol = Polyester

PP + Polypropylene

— — —

Please refer to www.perryequipment.com

for most current literature edition.

Corporate Offices & PlantPERRY EQUIPMENT CORPORATIONWolters Industrial ParkP.O. Box 640Mineral Wells,Texas 76068Telephone: 940-325-2575

800-877-PECOTelefax: 940-325-4622 e-mail: mwsales@perryequipment.com

Houston Branch Office1758 West Sam Houston Parkway N.Houston,Texas 77043-3115Telephone: 713-973-2575Telefax: 713-467-0475e-mail: houstonsales@perryequipment.com

Perry EquipmentItaliana S.R.L.via Camozzi, 10624121 Bergamo (BG)ItalyTelephone: 3903-523-6340Telefax: 3903-523-6380e-mail: italysales@perryequipment.com

Perry Equipment De MéxicoParque Industrial Benito JuárezAcceso III, 4-AQuerétaro, Querétaro, México C.P. 76120Telephone: 52-42-10-34-89Telefax: 52-42-10-90-39

Parque Industrial QuerétaroCalle Cerrada La Noria #108Santa Rosa JaurequiQuerétaro, Querétaro, México C.P. 76220e-mail: mexicosales@perryequipment.com

Perry EquipmentCorporationS.E. ASIA REGIONAL OFFICE35-4 Jalan SP2/1Taman Serdang Perdana, Seksyen2,43300 Seri KembanganSelangor D.E., MalaysiaTelephone: 603-8941-2366Telefax: 603-8941-1366e-mail: asiasales@perryequipment.com

Peco Filters, Ltd.1351 Hastings Crescent S.E.Calgary, AlbertaCanada T2G-4C8Telephone: 403-243-6700Telefax: 403-287-9304e-mail: canadasales@perryequipment.com

European OfficesPERRY EQUIPMENT LTD.Brunel Business CourtBrunel Way, ThetfordNorfolk 1P24 1HPEnglandTelephone: 01842 821000Telefax: 01842 821050e-mail: uksales@perryequipment.comwww.perry-equipment.co.uk

e-mail:elements@perryequipment.com

web site:www.perryequipment.com

Printed in USA

*Consult factory for retrofit dimensions & part nomenclature.