flare stack monitoring system - home -...
TRANSCRIPT
advanced thermography solutions
www.movitherm.com (949) 699-660015540 Rockfield Blvd, Suite C-110, Irvine, CA 92618, USA
Flare Stack Monitoring System
Additional Equipment
Protection Rating IP67 / NEMA 6
Enclosure Rating Class I, Div 1 & 2, Grp. C & D (Explosion Proof Option)
Cameras
Technical Data
Lens Angle 7 degrees
Sensor Resolution 320 x 240 pixels or 640 x 480 pixels
Operating Voltage 110 VAC or 24 VDC
Power Consumption 80 Watts Max
Focus Auto or Manual
Integrated Heating Thermostat Controlled
Dimensions (L x W x H) 25.6 x 9.6 x 9.4 in (650 x 245 x 239 mm) Including Sunshield
Controller
Protection Rating IP66 / NEMA 4
Operating System Windows 7
Monitor 17 in Resistive Touchscreen (1280 x 1024)
Operating Voltage 110 VAC
Power Consumption 230 Watts Max
Mounting Type Wall Mount
Integrated Cooling Built-In Cooling Fan
Dimensions (L x W x H) 12 x 24 x 24 in (305 x 610 x 610 mm)
Housing Material AISI316L Stainless Steel
Housing Material Powder-Coated Steel
Temperature Measurement Range 392 - 3632°F (200 - 2000°C)
Weight 33.2 lbs (15 kg)
Connectivity
Camera Data Cable Type 1310 nm Duplex Single-Mode Fiber, SC / SC connector
Camera Support Up to 4 Cameras
Controller Analog Outputs 4 x 4-20 mA or 0-20 mA Temperature Correlated (User-Configurable)
Camera Data Cable Length Up to 10 km
Controller Digital Outputs 7 x 24 V
Controller System Health Outputs 1 Dry Contact 240 VAC / 24 VDC, 10A
Weight 80 lbs (36.3 kg)