flexible cementitious waterproofing - aquafin inc. cementitious waterproofing. ... masonry and some...
TRANSCRIPT
AQUAFIN®-2K/Mw
ww
.aquafi
n.n
et
Building Product SystemsWaterproofing & Concrete Restoration
Decorative Coatings
Moisture Vapor Remediation & Flooring
Injection Grouting
Flexible CementitiousWaterproofing
AQUAFIN®-2K/M is a state of the art, highly flexible, protective and waterproof coating, ideal for sealing and coating a wide variety of projects.
AQUAFIN®-2K/M was developed due to a demand for a truly flexible coating, not only in terms of physical properties, but also in terms of applications and application methods. It is a two-component product resistant to water, moisture and abrasion, and composed of a cementitious powder and solvent free liquid. It has superior adhesion to many substrates, including concrete, brick, masonry and some natural stone substrates.
AQUAFIN®-2K/M is a leader in its class with up to 70% elongation, making it the perfect solution for waterproofing substrates prone to movement and cracking.
Unmatched flexibility for superior crack bridging capabilities
Advantages:
UV resistant
Self curing
Easy application
Solvent free – environmentally friendly
Available in several colors
Can be painted for uniform color
Applied to moist or damp substrates
Withstands pedestrian and light traffic; resists mechanical wear, abrasion and de-icing salts
Resists strong hydrostatic pressure (tested up to 460 ft. [140 m] water head, positive side)
Permanently flexible coating, elongation up to 70% (gray)
Crack bridging up to 1/16” (1.5 mm)
Meets or exceeds ANSI 118.10 and ANSI 118.12 (standard performance)
Proven product with 30+ years track record in Europe, 10+ years in the USA
Flex
ible
Cem
entitious
Wate
rpro
ofi
ng
Flexibility in waterproofing…
Typical Applications:
AQUAFIN®-2K/M is applied on new and old substrates to provide a protective, waterproof coating. It is a stand alone product that can be left as a finished surface or easily tiled or coated with mortars, stuccos, etc.
Typical applications include:
Swimming pools (tiled/untiled)
Marine and zoo aquarium tanks
Plaza decks and patios
Balconies, parapet walls, planter boxes
Mechanical rooms
Underneath flexible tile mortars in kitchens, bathrooms, swimming pools, balconies, etc.
Water and waste water treatment tanks
Above and below grade, interior or exterior
Foundations
AQ
UA
FIN
®-2
K/M
AQ
UA
FIN
®-2
K/M
Application:
AQUAFIN®-2K/M can be applied with a brush, roller, trowel or appropriate compressed-air spray equipment.
The two components are simply mixed together to create a workable consistency for easy applications. 2K/M has a pot life of approximately 45 minutes at 68° F (20° C).
AQUAFIN®-1KApplied as first coat, under 2K/M where negative side water pressure can be expected.
Accessory Products:
JOINT SEALING TAPE- 2000/2000-S Elastomeric, highly tear resistant waterproof tape used to repair cracks and seal joints within the 2K/M waterproofing system.
2x2 or 4x4 MESH Alkali resistant, fibreglass mesh, used to reinforce the tear resistance of 2K/M.
SEALING GASKET-18/18 Elastomeric pipe penetration sealing gasket.
FIX 10-S 30 sec, plug cement.
PLUG-IC 1-2 mins, fast setting crystalline waterstop and patching mortar.
MORTAR-LN Universal waterproofing, structural repairing & lining mortar with hydrophobic properties.
MORTAR-40 High early strenght polymer modified structural repair mortar.
AQUAFIN®-2K/M is available in several different colors and can be painted or topcoated, providing designers and applicators with limitless possibilities for their finished applications.
For complete application instructions and product information consult the current valid technical datasheet available online at www.aquafin.net.
JOINT SEALING TAPE-2000
4x4 MESH
SEALING GASKET-18/18
AQUAFIN®-1K
Spray application of a swimming pool
Roller application in a zoo exhibit
Brush application on a dam
Sample Applications
Here are a few examples of AQUAFIN®-2K/M applications.
Material application: Finished project:
Trowel application under tiles
04/
11 A
K/ED
/JD
Production and quality control:
AQUAFIN®-2K/M is produced in Elkton, MD, USA.
AQUAFIN, Inc. is a member of AQUAFIN International GmbH.
Other facilities are located in Egypt, Germany (2), India, Italy, Kazakhstan, Mauritius, Pakistan, Poland, Slovakia, Switzerland & Turkey. All AQUAFIN products go through effective quality control in the QC-laboratories at the plant site.
AQUAFIN, Inc.Triumph Industrial Park505 Blue Ball Rd., #160Elkton, MD 21921Toll Free: 1-866-AQUAFINPhone: (410) 392-2300Fax: (410) 392-2324E-mail: [email protected]: www.aquafin.net
AQUAFIN Inc. plant inElkton, MD, USA
Distributed by: