flexus 22 rgb - flexible led lighting€¦ · flexus 22 rgb - flexible led lighting flexus 22 rgb...
TRANSCRIPT
Flexus 22 RGB - Flexible LED Lighting
FLEXUS 22 RGB
Kemps Architectural Lighting Unit 10, Kirkstall Industrial Park, Kirkstall Road, Leeds LS4 2AZ, United KingdomT. +44(0)113 263 9039 E. [email protected] W. www.kempsarchitecturallighting.com
Applications
•Architectural & Commercial Lighting•Landscape & Exterior Lighting•Outlining Buildings
Features
•Bend direction - Vertical•Min Bend Diameter 30cm•UV & Flame resistant •Uniform & even light source with
no hotspots• IP68 for exterior use•Environmentally friendly & energyefficient
•Easy to install
Technical
•High quality SMD LED chip•7mtr Maximum series length•24V Input (Remote Drivers)•DALI - DMX•Operating Temp 0-50C•CE&ULcertification•3yr Warranty
FLEXUS 22 RGB
Kemps Architectural Lighting Unit 10, Kirkstall Industrial Park, Kirkstall Road, Leeds LS4 2AZ, United KingdomT. +44(0)113 263 9039 E. [email protected] W. www.kempsarchitecturallighting.com
Specification FLEXUS 22 RGB
Kemps Code Color Power(W) Volts Typical Lumens (mtr) Cutting Dimension Length(mm) Angle(Deg.)
KAL-C-FR-ProF22A-VB-24CV-RGB RGB 12W 24V R20 - G75 - B15 - W110 83mm 16mm*17mm 10000 160
Max continuous length of 7mtr when powering one end
FLEXUS 22 RGB
Kemps Architectural Lighting Unit 10, Kirkstall Industrial Park, Kirkstall Road, Leeds LS4 2AZ, United KingdomT. +44(0)113 263 9039 E. [email protected] W. www.kempsarchitecturallighting.com
Accessories FLEXUS 22 RGB
Kemps Code Description
KAL-F22A-IM/FC-B-300MM 4 Wires Bottom Feed Injection Moulded Front Connector with 300mm (11.8") Lead Wire
KAL-F22A-IM/FC-B-1000MM 4 Wires Bottom Feed Injection Moulded Front Connector with 1000mm (3.28Ft.) Lead Wire
KAL-F22A-IM/FC-B-3000MM 4 Wires Bottom Feed Injection Moulded Front Connector with 3000mm (9.84Ft.) Lead Wire
KAL-F22A-IM/FC-B-5000MM 4 Wires Bottom Feed Injection Moulded Front Connector with 5000mm (16.4Ft.) Lead Wire
KAL-F22A-IM/FC-B-10000MM 4 Wires Bottom Feed Injection Moulded Front Connector with 10000mm (32.8Ft.) Lead Wire
KAL-F22A-IM/FC-01-S-300MM 4 Wires Side Feed Injection Moulded Front Connector from 01 end with 300mm (11.8") Lead Wire
KAL-F22A-IM/FC-02-S-300MM 4 Wires Side Feed Injection Moulded Front Connector from 02 end with 300mm (11.8") Lead Wire
KAL-F22A-IM/FC-01-S-1000MM 4 Wires Side Feed Injection Moulded Front Connector from 01 end with 1000mm (3.28Ft.) Lead Wire
KAL-F22A-IM/FC-02-S-1000MM 4 Wires Side Feed Injection Moulded Front Connector from 02 end with 1000mm (3.28Ft.) Lead Wire
KAL-F22A-IM/FC-01-S-3000MM 4 Wires Side Feed Injection Moulded Front Connector from 01 end with 3000mm (9.84Ft.) Lead Wire
KAL-F22A-IM/FC-02-S-3000MM 4 Wires Side Feed Injection Moulded Front Connector from 02 end with 3000mm (9.84Ft.) Lead Wire
KAL-F22A-IM/FC-01-S-5000MM 4 Wires Side Feed Injection Moulded Front Connector from 01 end with 5000mm (16.4Ft.) Lead Wire
KAL-F22A-IM/FC-02-S-5000MM 4 Wires Side Feed Injection Moulded Front Connector from 02 end with 5000mm (16.4Ft.) Lead Wire
KAL-F22A-IM/FC-01-S-10000MM 4 Wires Side Feed Injection Moulded Front Connector from 01 end with 10000mm (32.8Ft.) Lead Wire
KAL-F22A-IM/FC-02-S-10000MM 4 Wires Side Feed Injection Moulded Front Connector from 02 end with 10000mm (32.8Ft.) Lead Wire
KAL-F22A-IM/FC-E-300MM 4 Wires End Feed Injection Moulded Front Connector with 300mm (11.8") Lead Wire
KAL-F22A-IM/FC-E-1000MM 4 Wires End Feed Injection Moulded Front Connector with 1000mm (3.28Ft.) Lead Wire
KAL-F22A-IM/FC-E-3000MM 4 Wires End Feed Injection Moulded Front Connector with 3000mm (9.84Ft.) Lead Wire
KAL-F22A-IM/FC-E-5000MM 4 Wires End Feed Injection Moulded Front Connector with 5000mm (16.4Ft.) Lead Wire
KAL-F22A-IM/FC-E-10000MM 4 Wires End Feed Injection Moulded Front Connector with 10000mm (32.8Ft.) Lead Wire
KAL-F22-IM/EC Injection Moulded End Cap
KAL-F22A-IM/JU-01/02-300MM 4 Wires Injection Moulded Jumper with 300mm (11.8") Lead Wire
KAL-F22-A/PL-2000MM-AL StandardAnodizedAluminumProfile,2000mm(80'')with10screws
KAL-F22-A/PL-1000MM-AL StandardAnodizedAluminumProfile,1000mm(40'')with5screws
KAL-F22-A/PL-500MM-AL StandardAnodizedAluminumProfile,500mm(20'')with3screws
KAL-F22-A/PL-50MM-AL StandardAnodizedAluminumProfile,50mm(2'')with1screw
KAL-F22-SLA/PL-2000MM-AL Self-LockingAnodizedAluminumProfile,2000mm(80'')with6clipsand10screws
KAL-F22-SLA/PL-1000MM-AL Self-LockingAnodizedAluminumProfile,1000mm(40'')with3clipsand5screws
KAL-F22-SLA/PL-500MM-AL Self-LockingAnodizedAluminumProfile,500mm(20'')with2clipsand3screws
KAL-F22-SLA/PL-50MM-AL Self-LockingAnodizedAluminumProfile,50mm(2'')with1clipand1screw
KAL-F22-SLA/PL-2000MM-AL2 NewSelf-LockingAnodizedAluminumProfile,2000mm(80'')with9springclipsand10screws
KAL-F22-SLA/PL-1000MM-AL2 NewSelf-LockingAnodizedAluminumProfile,1000mm(40'')with5springclipsand5screws
KAL-F22-SLA/PL-500MM-AL2 NewSelf-LockingAnodizedAluminumProfile,500mm(20'')with3springclipsand3screws
KAL-F22-SLA/PL-35MM-AL2 NewSelf-LockingAnodizedAluminumProfile,35mm(1.38'')with1springclipand2screws
KAL-F22-P/PL-2000MM-WT WhiteCoatingPlasticProfile,2000mm(80'')with10screws
KAL-F22-P/PL-1000MM-WT WhiteCoatingPlasticProfile,1000mm(40'')with5screws
KAL-F22-P/PL-500MM-WT WhiteCoatingPlasticProfile,500mm(20'')with3screws
FLEXUS 22 RGB
Assembly Caution
Additional Information
Kemps Architectural Lighting Unit 10, Kirkstall Industrial Park, Kirkstall Road, Leeds LS4 2AZ, United KingdomT. +44(0)113 263 9039 E. [email protected] W. www.kempsarchitecturallighting.com
Rev 1-07/17
Please contact our sales team on +44(0)113 263 9039 for further assistance. Specifications are subject to change withour prior notice. Please refer to our website for the most up to date version.
Flame Resistant
Solvents Resistant
UV Resistant
SaltwaterResistant
IK08Protection
BendingDiameter
9cm
Beam Angle160°
Flame Resistant
Solvents Resistant
UV Resistant
SaltwaterResistant
IK08Protection
BendingDiameter
9cm
Beam Angle160°
Flame Resistant
Solvents Resistant
UV Resistant
SaltwaterResistant
IK08Protection
BendingDiameter
9cm
Beam Angle160°
Flame Resistant
Solvents Resistant
UV Resistant
SaltwaterResistant
IK08Protection
BendingDiameter
9cm
Beam Angle160°
Flame Resistant
Solvents Resistant
UV Resistant
SaltwaterResistant
IK08Protection
BendingDiameter
9cm
Beam Angle160°
Flame Resistant
Solvents Resistant
UV Resistant
SaltwaterResistant
IK08Protection
BendingDiameter
9cm
Beam Angle160°
Section Detail 12www.edison-opto.comCopyright © 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1
Stellar Series Lighting Application Guide
Assembly Caution
EDFRF10B series minimum bent diameter and bending direction.
EDFRF15A/B series minimum bent diameter and bending direction.
EDFRF22A/B series minimum bent diameter and bending direction.
12 0mm
Ligh t SurfaceLigh t Surfac e
Ligh t Surface Ligh t Surfac e
Recommened Use
Ligh t Surface Ligh t Surface
××
120m m
Li gh t Su rfac eLigh t Surfac e
××
Ligh t Surface Ligh t Surfac e
Recommened Use
Ligh t Surface Ligh t Surface
××
Light Surface
Φ90mm
Light Surface
×
Light Surface Light Surface
Recommened Use
Light Surface Light Surface
××
www.edison-opto.com
Copyright © 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 4
Product Dimensions
EDFRF F10 Series 6LBU1xxJK0G07201 Dimensions
EDFRF F15 Series 6LBU1xxJK0M06001 Dimensions
EDFRF F22 Series 6LBU1M1JJ0L07201 and 6LBU1xxJK0G10801 Dimensions
18±0
.2
9±0.2
Emitting area
11.5±0.2
21±0
.2 Emitting area
16±0
.2
16±0.2
Emitting area
Note:All dimensions are in millimeters.
BendingDiameter
30cm
BendingDiameter
12cm
30cm
Light SurfaceLight Surface
Light Surface
Light SurfaceLight Surface
Light Surface