flow sciences lab design184.168.43.176/downloads/sheets/flowsciences-labdesigncutsheet.pdfsimplicity...
TRANSCRIPT
LAB DESIGN SERIES
FLOW SCIENCES LAB DESIGNWITH THE SAF T FLOW™ FUME HOOD,
THE LEV III™ PROCESS HOOD AND MORE
Saf T Flow™Fume Hood
LEV III™Process Hoods
PortableTables
FSI CoreSteel Casework
OVER 60% OF ENERGY SAVINGS WITH THE
SAF T FLOW™ SERIES
SAVE ENERGY AND LAB SPACE BY MOVING PROCESS
APPLICATIONS OUT OF FUME HOODS
STAINLESS STEEL AND POWDER COATED TABLES
AND CARTS FOR MAXIMUM MOBILITY
BASE CABINETS AND STEEL LAB CABINETS FOR FUME
HOODS AND OTHER CONTAINMENT ENCLOSURES
• Overlapping sash bypass provides better containment and does not require change if VAV is installed• All standard hoods have been tested to ANSI-ASHRAE 110• Heavy gauge superstructure and #35 steel chain drive will run 500,000 cycles without breaking• Slide-out top system to easily replace the top without lifting the superstructure • Run at 60 CFM to save over 60% of energy or thousands of dollars
SAF T FLOW™ FUME HOOD
BASE CABINETS AND STEEL LAB CABINETS
BENCHTOP HOOD
DISTILLATION HOODFLOOR MOUNTED HOOD
STANDARD CABINETS
FLAMMABLE / SOLVENT CABINETS
ACID / CORROSIVES CABINETS
DRAWER OVER DOOR CABINETS
DRAWER OVER DOOR CABINETS
24” 30” 36” 48” 60”
24” 30” 36” 48”
24” 30” 36” 48” 60”
24” 30” 36” 48”
• EPOXY PAINTED STEEL CONSTRUCTION• SINGLE INTERMEDIATE SHELF SUPPLIED• OPEN BACK• 5’ BASE CABINET OPTION
• DOUBLE STEEL WALLS• SINGLE INTERMEDIATE SHELF SUPPLIED• ALL FLAMMABLE CABINETS BUILT TO CONSTRUCTION STANDARDS EXPRESSED IN NFPA 30: SECTION 9.5.2(2)
• EPOXY PAINTED STEEL CONSTRUCTION• INTERIOR LINED WITH 3MM FRP PANEL• SINGLE INTERMEDIATE SHELF SUPPLIED
• EPOXY PAINTED STEEL CONSTRUCTION• SINGLE INTERMEDIATE SHELF SUPPLIED• OPEN BACK• 5’ CORNER CABINET L/R
BASE
CABIN
ETS F
OH HO
ODS
LAB B
ENCH
S
CABINETS ARE AVAILABLE IN
VARIABLE DEPTHS TO ACCOMODATE BOTH FUME HOODS AND OTHER STANDARD
ENCLOSURES
3’, 4’, 5’, 6’, 8’ Available
3’, 4’, 5’, 6’, 8’ Available3’, 4’, 5’, 6’, 8’ Available
• Save Energy and Lab Space by moving process applications out of Fume Hoods
• Glass or Acrylic viewing panels with polypropylene superstruture
• Portable and flexible to move from room to room or around lab space
• High containment as a low cost, low exhaust alternative
• Ideal for process applications, like Flash Chromatography, Rotary Evaporators, Microwave Digestions, Oven Processes, etc.
LEV III™ PROCESS HOODSOPEN FACE OPTIONS
CLOSED FACE OPTIONS
FOR APPLICATIONS WHERE MANIPULATION DURING THE PROCESS IS NECESARY
FOR LOAD AND GO APPLICATIONS TO REDUCE CFM NEEDS
FITNESS – Make sure that your containment solution matches your process needs. Some process applications can be moved out of fume hoods to save both energy and laboratory space.
APPLICABILITY – Choosing the right materials is essential for effective laboratory design. Wet labs require the use of chemically-resistant materials that are easy to clean and resist bacterial growth and corrosion. Laboratories with sensitive electronic equipment require the use of static-dissipative materials.
Whether you are designing a new laboratory or renovating an existing facility, it’s important to consider the fitness and applicability of fume hoods. Flow Sciences’ Saf-T-Flow™ Fume Hood Series are ducted for maximum safety and efficiency with minimum energy input. The Saf-T-Flow™ hood uses an overlapping sash bypass system that saves energy by significantly reducing the volume of air needed to clear fumes, vapors, and dust from the workspace. Fume hoods are ideal for wet chemistry applications where operators handle biological agents, chemicals, drugs, and other suspended liquids, but some laboratories combine wet chemistry and dry lab function. The use of special instrumentation requires modern laboratory design that is flexible and adapted to the needs of specific applications, from robotic equipment and rotary evaporators to microwaves and flash chromatography. For complex processes, Flow Sciences’ Saf-T-Flow™ Fume Hood can be coupled with the LEV III™ in order to optimize the utility of your laboratory design.
QUICK TIPS FOR LAB DESIGN
THE SCIENCE OF CHOICE
SAF T FLOW™ FUME HOOD LEV III™ PROCESS HOOD
SAFETY
FLEXIBILITY
CONTROLS &PLUMBING
MATERIAL OFCONSTRUCTION
FACEOPENING
Eliminates vapors and fumes associated with wet
chemistry and process equipment applications
Most effective containment for flash chromatrography,
rotovaps, and bulk processing for wet-dry
applications
Lightweight enclosure is portable, allowing for easy
layout adjustments
Standard design maximizes simplicity in lab planning,
layout, and HVAC coordination
Broen fittings with flexible tubing feature plumbed and fitted
connectors for existing house services
Optional built-in fire safety technology independently detects and automatically
extinguishes fires
Polypropylene superstructure comes with static-dissipative acrylic or fire-resistant
glass paneling
14 and 18-gauge framing system assures superstructure stability
Sliding-sash with optional sash stops to rapidly change the face opening for application
needs
Hinged and open-face options to accommodate load-and-go applications
or more hands-on processing
FLEXIBILITY – Rapid advancements in laboratory technology and the emergence of new areas of scientific research require flexible furniture choices that can accomodate specialized instrumentation.
ADAPTABILITY – Don’t rely on traditional solutions or casework to design your lab space. Changing laboratory layout requires a significant investment in new construction and results in downtime that affects performance.
TABLES AND CARTS
STAINLESS STEELTABLES AND CARTS
IN SIZES TO FIT ALL STANDARD
ENCLOSURES
POWDER COATEDTABLES AND CARTS
MILD STEEL IN SIZES
TO FIT ALL STANDARD ENCLOSURES
ADA / ERGONOMICLIFT TABLES AND CARTS
BUTTON CONTROLLED ADJUSTABLE HEIGHT IN STAINLESS OR POWDER
COATED MILD STEEL
OTHER FLOW SCIENCES HOODS
GLOVEBOX WORKSTATION BULK POWER API ENCLOSURE NITROGENEMA™ GLOVEBOX TASK SPECIFIC ENCLOSURES
GO TO FLOWSCIENCES.COM OR SCAN THE QR CODE TOLEARN MORE ABOUT THE SAF T FLOW™ FUME
HOOD AND WATCH THE NEW FUME HOOD VIDEOS!
FLOWSCIENCES.COMREV: 2
FLOW SCIENCES ADVANTAGE• Order In / Order Out in Six Weeks. FSI’s manufacturing capabilites and intuitive design allow for assembly parts to be prepared early in the process to ensure fast delivery times.
• Flow Sciences’ engineers design containment solutions for your lab needs and run CFD (Computational Fluid Dynamics) models to test the airflow in a system before production begins.
• All enlosures and hoods have an auto approval using sign-off drawings to ensure everything is correct before proceeding to manufacturing.
• Reliable tracking and safe packaging ensure timely shipments.