flux recovery unit model:fru-3/5/83.imimg.com/data3/oi/hk/my-633234/flux-recovery-system.pdf ·...
TRANSCRIPT
FRU-3/5/8
FLUX RECOVERY UNIT MODEL:FRU-3/5/8
HEAD OFFICE: 16/17, Ruby Industrial Estate, Chincholi Bunder, Off Link Road, Malad (West), Mumbai - 400 064. India
Tel: 022-28743785 / 28753843 / 28735881 Fax: 022-28712854 Email: [email protected]
website: www.icsplglobal.in
BANGALORE CHENNAI DELHI GOA HYDERABAD HUBLI MUMBAI NAGPUR PUNE VADODARA
INNOVATIVE CLEANING SYSTEMS PVT. LTD.
Flux Recovery System consists of Vacuum Unit, Primary Separator/Hopper, Collection Tool, Vacuum Hose & Recovery Hose. In Vacuum unit there is a Vacuum producer which is driven by a suitable Induction motor and is started by means of a Starter to give continuous, round-the-clock performance. It is also equipped with a Filter Chamber which installs a fabric filter to filter out fine powder from the flux and the Dust Container to separate the fine powder. The Primary Separator/Hopper consists of a Mesh to separate Slag/burnt flux and a butterfly valve (manually operated) for re-using the flux as and when required. During SAW welding, the flux which actually gets consumed is very minimal, whereas maximum quantity of flux falls down on the welding bed or goes as a waste. Since flux being a very expensive RM, it cannot be afforded to go down as a waste; our Flux Recovery System helps in recovering the unused flux from the welding area. The flux recovered enters the Primary Separator/Hopper with certain velocity; this flux hits the baffle plate provided inside, loses its velocity and falls down due to gravitational force. The flux while falling down passes through the Mesh wherein the slag/burnt flux (which also gets collected due to vacuum pressure) is separated and only the virgin flux gets down to the bottom, ready to be re-used over and over again by manually opening the butterfly valve. Therefore, our Flux Recovery Systems not only saves your time and effort but also saves your money!
TECHNICAL SPECIFICATIONS:
Model Vacuum mmWC
Airflow m3/hr.
Collection Hopper
Motor H.P.
Starter Type
Power Supply AC / Frequency
Dimensions LxWxH (inmm)
FRU-3 1500 270
45 Ltrs 3
DOL
415V / 50Hz 1200x635x1655
FRU-5
2500
390
45 Ltrs 5
DOL
415V / 50Hz
1200x635x1655
FRU-8
3200
480
45 Ltrs 7.5
FASD
415V / 50Hz
1200x635x1655