folding machines

World Leaders in Sheet Metal Machinery

FOLDING MACHINES

2

The Green solution

The motorized folding machines from CIDAN are the right solution for any company who is looking for flexibility in the production and has an environmentally friendly approach with the aim of cutting down on costs.

The green advantages CIDAN folding machines are only using power when the machine is actually working. This

means less costs for electricity. A typical hydraulic driven press-brake or folding machine will use an additional 1300-2000 hours of energy, just to keep the hydraulic unit running during 1 shift.

CIDAN folding machines are not using oil as it is a mechanical machine. This means that there will be no yearly oil changes, and consequently less costs for oil use / changes and maintenance.

The folding machines are quick at start up with a very low noise level during operation. This is an improvement of the work environment for the operator. Noise levels of hydraulics are typically 60-70 dB, our folding machines make ”no noise”!

Flexibility advantages• CIDAN folding machines only require one operator

• The operator does not have to be a specialist

• CIDAN folding machines can be delivered with a Combi Beam that includes both a straight tool and box-tools. Tool change takes less than 15 seconds and special tooling is seldom required

The above mentioned features will help any company choosing a folding machine from CIDAN to:• reduce production costs

• reduce maintenance costs

• increase work efficiency

• increase flexibility

• improve the work environment

Profiles / Customers

3

Customer groups (examples)

ENDUSER / SEGMENTS COMPONENTS PRODUCED FOCUS FEATURES OF THE ENDUSER SEGMENT

Ventilation & Isolation Tubes and boxes Precision for welding

Kitchen equipment Tables, exhausts, blowers Folding without marks

Car and truck industry Toolboxes Working time Frames Flexible machine

Roofing and Facades Roofing profiles Folding without marks Easy handling of large sheets

Furniture (metal) Various frames Folding without marks Little employee costs

Doors and gates Frames Easy sheet handling and Front panels Precision

Whiteware produktion Panels for refrigerators, Folding without marks freezers etc.

Cabinets Electric cabinets High precision on corners Easy handling and short cycle times

Sign industry Signs Easy handling Prepainted sheets

General production Signs Folding without marks Cabinet for machines Easy handling of large sheets Cable cabinets

Typical profiles made on a folding machine:

Profi les / Customers

4Model Folding length Capacity Opening Recesses Motor height clamping beam

Steel* Stainless Aluminium*** Clamping Width x height Clamping Folding steel** beam beam beam mm ( " ) mm ( ga ) mm ( ga ) mm ( " ) mm ( " ) mm ( " ) kW (hp) kW (hp)

KM 20 / 3,0 2050 ( 80) 3,0 (11) 2,00 (14) 4,50 (0.177) 100 (4) 50x60 (2x2.63) 1,1 (1.5) 2,2 (3.0)

KM 25 / 2,5 2550 (100) 2,5 (12) 1,50 (16) 4,00 (0.157) 100 (4) 50x60 (2x2.63) 1,1 (1.5) 1,5 (2.0)

KM 31 / 2,0 3100 (122) 2,0 (14) 1,25 (18) 3,00 (0.125) 100 (4) 50x60 (2x2.63) 1,1 (1.5) 1,5 (2.0)

KM 40 / 1,5 4050 (159) 1,5 (16) 1,00 (20) 2,50 (0.100) 100 (4) 50x60 (2x2.63) 1,1 (1.5) 1,1 (2.0)

at 400 N7mm2–58000 lbf/in2 (psi)at 600 N7mm2–87000 lbf/in2 (psi)at 200 N7mm2–29000 lbf/in2 (psi)

4

KM

KM

Cidan´s power folder model KM is made in a sturdy all-welded steel construction. As standard both the folding beam and the clamping beam have twin drives.

A strong eccentric that almost eliminates wear and tear moves the clamping beam and gives the best possible opening and closing speeds.

Model KM has a potentiometer control for adjustment of the clamping beam height. The folding angle is set via a graduated scale.

KM

KM

Standard features Clamping beam with straight rail 30° (alt. 1) Folding beam rail 20 mm (.787”) Lower beam rail Adjustable crowning of folding beam rail

Options Clamping beam with built-in divided high rail 30° (alt. 2) Multifold execution with divided rails in all 3 beam (alt. 3) Manual rack & pinion back gauge 0-750 mm (0-29.5”)

or 0-1000 mm (0-39.4”) Straight rail 45° Special rails on request

Model Folding length Folding capacity Opening Recesses Motor height clamping beam


KM 20 / 3,0 (0611) 2050 ( 80) 3,0 (11) 2,00 (14) 4,50 (0.177) 100 (4) 50x60 (2x2.63) 1,1 (1.5) 2,2 (3.0)

KM 25 / 2,5 (0812) 2550 (100) 2,5 (12) 1,50 (16) 4,00 (0.157) 100 (4) 50x60 (2x2.63) 1,1 (1.5) 1,5 (2.0)

KM 31 / 2,0 (1014) 3100 (122) 2,0 (14) 1,25 (18) 3,00 (0.125) 100 (4) 50x60 (2x2.63) 1,1 (1.5) 1,5 (2.0)

KM 40 / 1,5 (1316) 4050 (159) 1,5 (16) 1,00 (20) 2,50 (0.100) 100 (4) 50x60 (2x2.63) 1,1 (1.5) 1,5 (2.0)

at 400 N/mm2–58000 lbf/in2 (psi)at 600 N/mm2–87000 lbf/in2 (psi)at 200 N/mm2–29000 lbf/in2 (psi)

5Model Folding length Capacity Opening Recesses Motor height clamping beam


KM 20 / 3,0 2050 ( 80) 3,0 (11) 2,00 (14) 4,50 (0.177) 100 (4) 50x60 (2x2.63) 1,1 (1.5) 2,2 (3.0)

KM 25 / 2,5 2550 (100) 2,5 (12) 1,50 (16) 4,00 (0.157) 100 (4) 50x60 (2x2.63) 1,1 (1.5) 1,5 (2.0)

KM 31 / 2,0 3100 (122) 2,0 (14) 1,25 (18) 3,00 (0.125) 100 (4) 50x60 (2x2.63) 1,1 (1.5) 1,5 (2.0)

KM 40 / 1,5 4050 (159) 1,5 (16) 1,00 (20) 2,50 (0.100) 100 (4) 50x60 (2x2.63) 1,1 (1.5) 1,1 (2.0)

at 400 N7mm2–58000 lbf/in2 (psi)at 600 N7mm2–87000 lbf/in2 (psi)at 200 N7mm2–29000 lbf/in2 (psi)

5

KMP

KMP

KMP



KMP 20 / 3,0 (0611) 2050 ( 80) 3,0 (11) 2,00 (14) 4,5 (0.177) 100 (4) 50x60 (2x2.63) 1,1 (1.5) 2,2 (3.0)

KMP 25 / 2,5 (0812) 2550 (100) 2,5 (12) 1,50 (16) 4,0 (0.157) 100 (4) 50x60 (2x2.63) 1,1 (1.5) 1,5 (2.0)

KMP 31 / 2,0 (1014) 3100 (122) 2,0 (14) 1,25 (18) 3,0 (0.125) 100 (4) 50x60 (2x2.63) 1,1 (1.5) 1,5 (2.0)

KMP40 / 1,5 (1316) 4050 (159) 1,5 (16) 1,00 (20) 2,5 (0.100) 100 (4) 50x60 (2x2.63) 1,1 (1.5) 1,5 (2.0)


Cidan´s power folder model KMP is made in a sturdy all-welded steel construction. As standard both the folding beam and the clamping beam have twin drives.

A strong eccentric that almost eliminates wear and tear moves the clamping beam and gives the best possible opening and closing speeds.

Model KMP is delivered with a CNC control and motorized back gauge AS 1000 (.196” - 39.4”).

Standard features Clamping beam with straight rail 30° (alt. 1) Motorized back gauge AS 1000 mm (.196” - 39.4”) CNC control EasyLink Folding beam rail Lower beam rail Adjustable crowning of folding beam rail

Options Clamping beam with built-in divided high rail 30° (alt. 2) Multifold execution with divided rails in all 3 beams (alt. 3) Motorized back gauge AMF 1550 (.196” - 59.055’’) or AMF 2070 (.196” - 78.74”)

Straight rail 45° Special rails on request

K15 / PF

6

Standard features Clamping beam with straight rail 30° Motorized back gauge AS-1000 or AMF CNC control EasyLink or ProLink Turnable folding beam rail 7/10 mm (.275” / .394”) Folding beam rail 20 mm (.787”) Lower beam rail Manual crowning of folding beam rail

Options Other back gauge types Round folding rail Special rails on request Squaring arm Ball transfers in back gauge table Foot switch on rail



K15-20 / PF 0614 2060 ( 81) 2,00 (14) 1,00 (18) 3,0 (0.125) 115 (4.5) 40x40 (1.6x1.6) 0,75 (1) 1,1 (1,5)

K15-25 / PF 0816 2550 (100) 1,50 (16) 0,90 (20) 2,5 (0.100) 115 (4.5) 40x40 (1.6x1.6) 0,75 (1) 1,1 (1,5)

K15-30 / PF 1016 3100 (122) 1,50 (16) 0,90 (20) 2,5 (0.100) 115 (4.5) 20x40 (0.8x1.6) 0,75 (1) 1,1 (1,5)


K15 / PF

K15/PF is an extremely quick and user friendly folding machine, built in a sturdy construction. As standard the machine has CNC control and motorized back gauge.

An eccentric drive that minimizes wear and gives the best possible opening and closing speeds drives the clamping beam. Furthermore, this gives the best possible clamping pressure.

7

Built heavy duty, model K25/PFP is fast and very easy to use. Both the folding beam and the clamping beam have twin drives.

As standard model K25/PFP is supplied with CNC-control and motorized back gauge, and it can also be equipped with our unique Combi Clamping Beam.

The patented Combi Clamping Beam (option) with automatic locking makes it possible to change tools in less than 15 seconds!

With the Combi Clamping Beam, tooling is programmed directly in the control, and thus the tool change is made automatically.

Standard features Clamping beam with straight rail 30° Motorized back gauge AS 1000 or AMF CNC control EasyLink or Prolink Turnable folding beam rail 7/10 mm (.275” / .394”) Folding beam rail 20 or 25 mm (1”) Lower beam rail Frequency controlled folding movement (K25-40) Manual crowning of folding beam rail

Options Combi Clamping Beam with standard clamping

of the divided rail Other back gauge types Round folding rail Special rails on request Folding beam rail 35 mm (1.38”) Squaring arm Ball transfers in back gauge table Foot switch on rail



K25-20 / PFP 0611 2060 ( 81) 3,0 (11) 2,00 (14) 4,5 (0.177) 135 (5.3) 69x49 (2.7x1.9) 1,5 (2) 2,2 (3.0)

K25-25 / PFP 0812 2550 (100) 2,5 (12) 1,50 (16) 4,0 (0.157) 135 (5.3) 69x49 (2.7x1.9) 1,5 (2) 1,5 (2.0)

K25-30 / PFP 1014 3100 (122) 2,0 (14) 1,25 (18) 3,0 (0.125) 135 (5.3) 49x49 (1.9x1.9) 1,5 (2) 1,5 (2.0)

K25-40 / PFP 1316 4050 (159) 1,5 (16) 1,00 (20) 2,5 (0.100) 135 (5.3) 69x49 (2.7x1.9) 1,5 (2) 2,2 (3.0)


K25 / PFP

K25 / PFP

FUTURA

FUTURA

Based on the Pro-line series model FUTURA is a new and patented development especially for the segment of 1.5-3.0 mm (16 ga-11 ga) sheets. The FUTURA is built in a modern and new design, and at the same time it is extremely flexible in its construction. As standard model FUTURA is delivered with graphic CNC control. FUTURA may be provided with Combi Clamping Beam, prepared for tools up to 200 mm

(7.87”) height. Change of tool height does not require any machine change. FUTURA may also be provided with the Multifold tool system, i.e. with divided tools in

lower and folding beams. Multifold includes height adjustable back gauge and must be combined with the Combi Clamping Beam. In this way all 3 beams will hold divided rails, making it possible to fold even very complicated profiles. Futura is patented due to several revolutionary construction solutions.

Standard features Clamping beam with straight rail 30° Motorized back gauge AMF-1550 (61”) Graphic CNC control ProLink Folding beam rails 10 and 20 mm (.394” and 787”)

with quick change Lower beam rail Manual crowning of folding beam rail Motorized adjustment of sheet thickness 0-4 mm (0-9 ga)

(manual 4-20 mm / 9 ga - 0.8") Frequency controlled folding movement

Options Combi Clamping Beam with 125 mm (4.92”) high divided

rail with standard clamping Combi Clamping Beam with 125, 150 or 200 mm

(4.92”, 5.9” or 7.87”) high divided rail with quick change Multifold execution Other back gauge types Special rails on request 7, 15, 25 or 30 mm (.276”, .591”, 1” or 1.18”)

folding beam rail with quick change Squaring arm Ball transfers in back gauge table Automatic lubrication Movable foot switch on rail



Futura 20 (0611) 2100 ( 82) 3,00 (11) 2,00 (14) 4,5 (0.177) 195 (7.7) 60x60 (2.3x2.3) 2,2 (3) 2,2 (3)

Futura 25 (0812) 2600 (102) 2,50 (12) 1,50 (16) 4,0 (0.157) 195 (7.7) 60x60 (2.3x2.3) 2,2 (3) 2,2 (3)

Futura 30 (1014) 3100 (122) 2,00 (14) 1,25 (18) 3,0 (0.125) 195 (7.7) 60x60 (2.3x2.3) 2,2 (3) 2,2 (3)

Futura 40 (1316) 4100 (161) 1,75 (16) 1,00 (20) 2,5 (0.100) 195 (7.7) 60x60 (2.3x2.3) 2,2 (3) 2,2 (3)


8

FUTURA PLUS

FUTURA PLUS

FUTURA PLUS adds a further development to our FUTURA series, and with the increased capacity it is possible to fold e.g - 3.0 mm (11 ga) thick sheet at 3 meters (10 feet) length.

As standard model FUTURA PLUS is delivered with graphic CNC control. As standard FUTURA PLUS has twin drive of the folding beam with 2 motores

– one at each side of the folding beam. FUTURA PLUS is offered with Combi Clamping Beam, prepared for tools up to 200 mm height.

Change of tool height does not require any machine change. FUTURA PLUS is also offered with the Multifold tool system, i.e. with divided tools in lower and folding

beams. Multifold includes height adjustable back gauge and must be combIned with the Combi Clamping Beam. In this way all 3 beams will hold divided rails, making it possible to fold even very complicated profiles.

Futura Plus is patented due to several revolutionary construction solutions.

Options Combi Clamping Beam with 125 mm (4.92”) high

divided rail with standard clamping Combi Clamping Beam with 125 mm (4.92”) high

divided rail with quick change Combi Clamping Beam with quick change tools 150 mm

or 200 mm (5.9” or 7.87”) height Multifold execution (combined with Combi Clamping

Beam only) Other back gauge types Special rails on request 7, 10, 20 or 25 mm (.276”, .394”, 1”or 1.18”)

folding beam rail with quick change Squaring arm Ball transfers in back gauge table Automatic lubrication

Standard features Clamping beam with straight rail 30° Motorized back gauge AMF-1550 Graphic CNC control ProLink Folding beam rails 15 and 30 mm (.59” and 1.18”)

with quick change Lower beam rail Twin drive of folding beam Manual crowning of folding beam rail Frequency controlled folding movement Motorized adjustment of sheet thickness 0-4 mm (0-9 ga)

(manual 4-20 mm / 9 ga - 0.8")



Futura Plus 20 (0609) 2100 (82) 4,0 ( 9) 3,0 (11) 6,0 (0.236) 195 (7.7) 60x60 (2.3x2.3) 2,2 (3) 1,5+1,5(2+2)

Futura Plus 25 (0810) 2600 (102) 3,5 (10) 2,5 (12) 5,0 (0.197) 195 (7.7) 60x60 (2.3x2.3) 2,2 (3) 1,5+1,5(2+2)

Futura Plus 30 (1011) 3100 (122) 3,0 (11) 2,0 (14) 4,5 (0.177) 195 (7.7) 60x60 (2.3x2.3) 2,2 (3) 1,5+1,5(2+2)

Futura Plus 40 (1312) 4100 (161) 2,5 (12) 1,5 (16) 4,0 (0.157) 195 (7.7) 60x60 (2.3x2.3) 2,2 (3) 1,5+1,5(2+2)


9

PROLINO

PROLINO

PROLINO is the basic machine in our Pro-Line series. The machine construction ensures today´s high demand to accuracy and productivity with minimum maintenance.

As standard PROLINO is delivered with graphic CNC control and motorized back gauge. PROLINO may be delivered with our unique Combi Clamping Beam with quick change

tools, 150 mm (5.9”) high. If delivered with Combi Clamping Beam PROLINO may also be delivered with Multifold

tools, i.e. with divided lower beam and folding beam rails, including height adjustable back gauge.

Prolino has extra power reserves for hemming.

Standard features Clamping beam with straight rail 35° Motorized back gauge AMF-1650 Graphic CNC control ProLink Folding beam rails 15 and 35 mm (.591” - 1.38”) Lower beam rail Frequency controlled folding movement Manual crowning of folding beam rail

Options Combi Clamping Beam with 150 mm (5.9”) or

250 mm (9.84’’) high divided rail with quick change Multifold execution Other back gauge types Special rails on request Ball transfers in back gauge table


Steel* Stainless Aluminium*** Clamping Width x height Clamping Folding steel** beam beam beam mm ( " ) mm ( ga ) mm ( ga ) mm ( "/ga ) mm ( " ) mm ( " ) kW (hp) kW (hp)

Prolino 20 (0606) 2100 ( 82) 5,0 ( 6) 3,0 (11) 8,0 (0.310") 200 (7.8) 100x65 (4x2.5) 3,0 (4) 5,5 (7,5)

Prolino 25 (0808) 2600 (102) 4,5 ( 8) 3,0 (11) 7,0 (0.275") 200 (7.8) 100x65 (4x2.5) 3,0 (4) 5,5 (7,5)

Prolino 30 (1009) 3100 (122) 4,0 ( 9) 2,5 (12) 6,0 (0.250") 200 (7.8) 100x65 (4x2.5) 3,0 (4) 5,5 (7,5)

Prolino 40 (1311) 4100 (161) 3,0 (11) 2,0 (14) 4,0 (9 ga) 200 (7.8) 100x65 (4x2.5) 3,0 (4) 5,5 (7,5)


10

PRO

PROModel Folding length Folding capacity Opening Recesses Motor height clamping beam


Pro 25 (0808) 2600 (102) 4,5 ( 8) 3,0 (11) 7,0 (0.275") 200 (7.8) 100x65 (4x2.5) 4 (5,5) 5,5 (7,5)

Pro 30 (1009) 3100 (122) 4,0 ( 9) 2,5 (12) 6,0 (0.250") 200 (7.8) 100x65 (4x2.5) 4 (5,5) 5,5 (7,5)

Pro 40 (1311) 4100 (161) 3,0 (11) 2,0 (14) 4,0 (0.157") 200 (7.8) 100x65 (4x2.5) 4 (5,5) 5,5 (7,5)


Model PRO is one of our top models for productivity and accuracy with a variety of standard features. As standard model PRO is delivered with Combi Clamping Beam with 150 mm (5.9”)

divided quick change tools, but may also be delivered with a 250 mm (9.84”) high divided rail. The tool height is controlled automatically. Folding beam crowning and adjustment of sheet thickness are fully programmable

in the ProLink graphic CNC control. Another standard feature is the MULTIFOLD tool system with divided lower beam and

folding beam quick change tools, also including the height adjustable back gauge.

Standard features Combi Clamping Beam with 35° straight rail and

150 mm high divided rail with quick change Motorized back gauge AMF-1650 with ball transfer

in back gauge table Graphic CNC control ProLink MULTIFOLD tool system with divided lower beam rail

51 mm (1.969”) high and divided folding beam rails 15 and 35 mm (.591” - 1.38”)

Motorized height adjustment of back gauge CNC controlled crowning Frequency controlled folding movement CNC controlled adjustment of sheet thickness 0-4,5 mm

(0 - .177”) (manual 4,5 - 35 mm / .177” - 1.38”)

Options Extra high 250 mm (9.84”) divided in

the Combi Clamping Beam Other back gauge types Special rails on request Squaring arm

11

MEGAPRO

MEGAPRO

MEGAPRO is our very top model regarding capacity—built for the industry – rendering the possibility to fold e.g. 3,000 x 6,0 mm (120” x 1/4”) sheets As standard model MEGAPRO is delivered with our graphic CNC control ProLink. Model MEGAPRO has a 35° straight rail with pneumatic quick change system. Optionally, model MEGAPRO may be delivered with divided rails in lower beam

and folding beam. Another option is a 100 mm (3.94”) high divided rail for the clamping beam.

Standard features Clamping beam with straight rail 35° Motorized back gauge AMF-1650 with servo drive Graphic CNC control ProLink Folding beam rails 20 and 40 mm (.787” - 1.574”) Lower beam rail 51 mm (1.97”) high Twin drive - with 2 motors - of folding beam Twin drive - with 2 motors - of clamping beam Motorized crowning of folding beam rail Motorized controlled folding movement Motorized adjustment of sheet thickness 0-80 mm

(0 - 3.14”) Motorized adjustment of folding centre 0-80 mm

(0 - 3.14”) Automatic lubrication

Options Divided clamping beam rail 100 mm high Multifold tool system with divided folding and lower

beam rails, including height adjustable back gauge Automatic protection against collision folding

beam / operator


Steel* Stainless Aluminium*** Clamping Width x height Clamping Folding steel** beam beam beam mm ( " ) mm ( " ) mm ( "/ga ) mm ( " ) mm ( " ) mm ( " ) kW (hp) kW (hp)

Megapro 25 (08) 2600 (102) 8,0 (.310) 5,0 (.196") 10,0 (0.394) 350 (13) 84x72 (3.3x2.8) 2x5,5(7.5+7.5) 2x4,0(5.5+5.5)

Megapro 30 (10) 3100 (122) 6,0 (.250) 4,0 ( 9 ga) 9,0 (0.354) 350 (13) 84x72 (3.3x2.8) 2x5,5(7.5+7.5) 2x4,0(5.5+5.5)

Megapro 40 (13) 4100 (161) 5,0 (.197) 3,0 (11 ga) 8,0 (0.250) 350 (13) 84x72 (3.3x2.8) 2x5,5(7.5+7.5) 2x4,0(5.5+5.5)


12

13

Quick change toolsThe tool is loosened with a simple grip.

KM and KMP may be delivered with divided clamping beam rail and in Multifold execution.

Combi Clamping Beam – with its straight rail ready for use.

Combi Clamping Beam – with its divided rail ready for use.

The rotating Combi Clamping Beam was a revolution within folding. Since 1988, when this patented solution was developed, much more than 2000 machines with this tool system have been sold world wide.

Pneumatic Clamping of clamping beam tool, standard for model MEGAPRO(divided tool = option).

Multifold tool system – divided rails in lower beam and folding beam, including height adjustable back gauge (not for models KM/KMP).

Tooling options

14

Control systems

A simple and easily programmable Touch Screen control with a 10” color monitor with the possibility to program folding angle, back gauge length and opening height. The control has a memory to store a number of programs.

Used for: KMP, K15/PF, K25/PFP

Features

Numerical CNC control with 10" touch screen

Adjustable hem, clamping pressure and opening height of each operation

Choice of tooling, box bending or standard rail for each operation (K25 combi)

Memory of 1000 program files with 99 bendings for each program (numeric/alpha-numeric)

Copying of program files

Back up via USB

Error search via touch screen

EasyLink is also capable of working with combi-beam

EasyLink

15

A windows based Touch Screen control with a 15” color monitor. With the large screen and the graphics it is quick and easy to make a program.

Used for: K15/PF, K25/PFP, Futura, Futura Plus, Prolino, Pro, Megapro

Features

Numerical CNC control with 15’’ touch screen

Adjustable hem, clamping pressure and opening height of each operation

The operator can edit the standard profiles already stored in the control or draw a new himself.When a standard profile is used as basis the lengths and angles diversifying from the standard profile must be changed. Following this, the control calculates cutting measures and finishes the program. The control guides the operator through the folding cycle and shows how to turn the sheet in the machine.When the graphic programming of a profile is used the control makes a collision control. Thus, the control will inform the operator whether it is possible to fold the programmed profile.

Furthermore, the operator may program manually without using the graphics.If the machine is equipped with such features the ProLink may also control adjustment of sheet thickness, crowning of folding beam rail, adjustment of folding center, and Combi Clamping Beam rotation.

Programs for off line programming are available so that folding program can be prepared on an external PC instead of having to do the programming on the machine itself. Finished programs may then be transferred to the machine via networks or an USB stick.

Control systems

ProLink

16

Back gauges

TAFeatures

Used for: KM Manual adjustment of back gauge

AS-1000Features

Used for: KMP, K15/PF, K25/PFP Power adjustment of back gauge Working depth 1000 mm (39.42") Servomotor and belt drive 2 back gauge fingers per groove 10 grooves for fingers in back gauge 3 meter (10 ft) With ball transfer in back gauge (option) Air pressure for back gauge is required

AMFFeatures

Used for: K15/PF, K25/PFP, Futura, Futura Plus, Prolino, Pro, Megapro Power adjustment of back gauge Working depth 1550 - 4000 mm (60"-160") Servomotor and ball screw drive 3 back gauge fingers per groove 14 grooves for fingers in back gauge 3 meter (10 ft) With ball transfer in back gauge (option) Air pressure for back gauge is required Height adjustable back gauge, 40 mm (1.57") (Futura),

50 mm (2") (Pro)

AMF-L shapeFeatures

Also available in J and U shapes

4-in-1

17

BMF

BMF

Cidan´s largest manual folding machine - model BMF - is built following the principle 4-in-one. With this principle model BMF can at a later date simply and easily be changed from one model to the other - no matter which model was originally chosen.

Model BMF is heavily built, and the eccentric movement makes it quick and easy to use. Clamping beam and folding beam are gas spring assisted. The machine angles 0-180° can easily be set. The lower beam is prepared for fitting of a rack-and-pinion back gauge. The finger blades and the divided 45° high rail can be built together from 25 mm (1”) to

full working length with 5 mm (0.200”) intervals.

Standard features Folding beam rail, 20 mm (3/4”) Gas spring for clamping beam and folding beam Folding angle stop 0-180° Execution BMFL: straight rail 25° ExecutionBMFH: undivided high clamping beam rail 45° Execution BMFHK-1: finger blades 90°,

height 120 mm (4 5/8”) Execution BMFHK-2: divided 45° high rail,

height 120 mm (4 5/8”)

Options Folding beam rail: 10 to 15 mm (3/8 or 5/8 ”) Round folding rail: R=2,5mm (0.100”) BMFL, or R=5,0 mm

(0.200”) BMFH Flying shear Rack-and-pinion back gauge: 0-500 mm (0-19”)

or 65-500 mm (2 3/4 - 9”)

Manual M

achines

Model Folding Folding Opening Weight Outside dimensions BMFL length capacity height

Steel* Clamping BMFL Lenght Width Height beam mm ( " ) mm ( ga ) mm ( " ) kg (Ibs) mm ( " ) mm ( " ) mm ( " )

BMF 10/3,0 (0311) 1050 ( 40) 3,0 (11) 50 (2) 475 (1050) 1500 ( 60) 750 (30) 1200 (48)

BMF 20/2,0 (0614) 2050 ( 80) 2,0 (14) 50 (2) 665 (1467) 2500 (100) 750 (30) 1200 (48)

BMF 30/1,5 (1016) 3050 (120) 1,5 (16) 50 (2) 855 (1885) 3500 (138) 750 (30) 1200 (48)


18

MULTIKANT

MULTIKANT

Multikant is available in 2 executions. In the standard execution the tools are mounted in the clamping beam by a clamping rail.

In quick change execution the tools are fitted without any use of hand tools.

Clamping beam rail and lower beam rail have right and left horns. Lower beam and folding beam have recesses right and left. The clamping beam can be operated by hand lever and by foot pedal. For most folding tasks the clamping beam is only opened 2-3 mm (1/8”)

to move the sheet. Therefore, on each side of the side frame a pedal is placed, allowing the clamping beam to open max. 6-7mm (1/4”).

Clamping beam and folding beam are gas spring assisted. The clamping pressure can be adjusted by means of an adjusting

eccentric. Pre-stress of the folding rail can be adjusted by an adjustment screw to

compensate spring back of material. Screw to compensate spring back of material.

Cidan´s box-and-pan folder model Multikant has segmented rails in the clamping beam, in lower beam, and in folding beam. With this tooling combination it is easy and quick to fold boxes and profiles.

Standard features Clamping beam - standard execution:

30° divided rail with horns. Clamping beam - quick change: 30° divided rail

with horns and quick change system Lower beam: 90° divided rail with horns Folding beam: divided folding beam rail 15 mm (5/8”) Gas springs for clamping beam and folding beam Folding angle stop 0-180° Removeable tool box with back gauge 50-400 mm (2-15”)

Options Rack-and pinion back gauge 50-500 mm (2-19”) Flying shear Transport wheels

Quick change tooling

Standard clamping with transport wheels

Model Folding Folding Opening Weight Outside dimensions length capacity height

Steel* Clamping Lenght Width Height beam mm ( " ) mm ( ga ) mm ( " ) kg (Ibs) mm ( " ) mm ( " ) mm ( " )

Multikant 650 / 2,0 (0214) 650 (25) 2,0 (14) 85 (3 5/16) 175 (385) 850 (34) 600 (24) 1055 (42)

Multikant 1050 / 1,2 (0318) 1050 (40) 1,2 (18) 85 (3 5/16) 235 (518) 1250 (50) 600 (24) 1055 (42)

Multikant Plus 1050 / 2,0 (0314) 1050 (40) 2,0 (14) 110 (4 5/16) 310 (693) 1380 (55) 670 (27) 1085 (43)

Mulitikant 1350 / 1,0 (0420) 1350 (52) 1,0 (20) 85 (3 5/16) 280 (618) 1550 (61) 600 (24) 1055 (42)


19

MULTIKANT

MULTIKANT PLUSModel Folding Folding Opening Weight Outside dimensions length capacity height

Steel* Clamping Lenght Width Height beam mm ( " ) mm ( ga ) mm ( " ) kg (Ibs) mm ( " ) mm ( " ) mm ( " )

Multikant Plus 1350 / 1,6 (0416) 1350 (52) 1,6 (16) 110 (4 5/16) 365 ( 804) 1630 (65) 670 (27) 1085 (43)

Multikant Plus 1550 / 1,5 (0516) 1550 (60) 1,5 (16) 110 (4 5/16) 490 (1079) 1880 (74) 670 (27) 1085 (43)

Multikant Plus 2050 / 1,0 (0620) 2050 (80) 1,0 (20) 110 (4 5/16) 580 (1277) 2380 (94) 670 (27) 1085 (43)


For model MULTIKANT we offer a flying shear so that the machine can also be used as a shear

On the rear side the machine has a tool box for storing of the segments that are not in use. The cover has a built-in back gauge 50-400 mm (2-15”)

Folding stop

As an option a rack-and-pinion back gauge 50-500 mm (2-19”) can be supplied

Examples of profiles that can be done on the Multikant folder:

Multikant with standard tools

Manual M

achines

PETERSEN MACHINERY GROUP A/Smarkets the brands CIDAN and GÖTENEDS world wide, and our machines are sold via dealers and agents in more than 30 countries.

For more than 60 years our factories have produced sheet metal machinery, and together the factories offer one of the widest machine programmes on the market.

Within our production facilities of totally more than 11.000 m2 (100.000 sq ft) we yearly manufacture more than 1.000 machines of which a large number are CNC controlled.

All our machine concepts are based on our own developments and our own patents, and we focus on flexible and simple-to-use solutions of the highest quality.

This catalogue is one of 2 showing our wide programme of sheet metal machinery. Left we show examples of our wide programme of machines from the Shears and CTL lines catalogue.

We produce CTL lines in 3 sizes

Working width

1050 (40), 1250 (49) , 1550 (61) mm (inch)

Capacity

1,25 to 2,5 (18-12) mm (ga)

OTHER PRODUCT BROCHURES:

Shears and cut to length lines

Picture: QLA Profi 12/1,75

Picture: MS-R

We produce two different shear models

Working width

1350 (53), 2050 (80), 2550 (100), 3100 (122), 4050 (159); mm (inch)

Capacity

up to 4,5 mm (8 ga)

SWEDENDENMARKUSA

GEORGIA / USA

OFFICE AND WAREHOUSE

SWEDEN

DENMARK

PRODUCTION

USA:Cidan Machinery Inc.611 Highway 74 South, Suite 700Peach Tree City, GA 30269Tel. +1 770-692-7230Fax +1 770-692-7274E-mail: [email protected]

DENMARK:Petersen Machinery Group A/SHedevej 44DK-7171 UldumTel. +45 75 89 33 11Fax +45 75 89 37 25E-mail: [email protected]

SWEDEN:AB Göteneds Mekaniska VerkstadP.O. Box 28SE-533 21 GöteneTel. +46 (0) 511 245 20Fax +46 (0) 511 596 41E-mail: [email protected]

folding machines

Documents