foodservice product - monarch water
TRANSCRIPT
Hard Water Protection & Water Quality Improvement for Professional Foodservice Operators
MONARCH WATER
FOODSERVICEPRODUCTGUIDE2021. Edition 1
2
WELCOME
MONARCH WATER FOODSERVICE PRODUCT GUIDE
Drinking Water
CONTENTS
*Everpure® is a registered trademark of Everpure Inc. ** excluding EDC & DS softeners - please allow 5 working days
[email protected] | monarchwater.co.uk/foodservice | 01986 784759
INT
RO
DU
CT
ION
2 3
As a result of growing interest in our products and services, we are pleased to bring our new and expanded range of water treatment products to the catering equipment, coffee and wider hospitality markets. Established in 1964, our products have been providing protection against hard water for over 55 years, allowing our customers to enjoy the many benefits associated with soft water.
At Monarch Water, we’re proud of our reputation for selling innovative, high-quality softeners into the home. Merchants, Installers and Consumers rate our products at the very top for quality, efficiency, reliability and ease of use.
We are therefore very excited to bring our WRAS approved PROSOFT range of innovative, next-generation water softeners to market, along with our new PROFILTR range of water filters for coffee and foodservice. In addition, our IONEX Calcium Treatment Filters provide no-nonsense protection against limescale. Our range also includes wastewater pumps, RO systems, commercial softeners, and an extensive line-up of associated parts.
Whether you’re looking for protection against limescale build-up for combi-ovens or dishwashers, improved water quality for hot beverages, coffee or drinking water, total protection and chloride removal through Reverse Osmosis or to pump wastewater away from combi-ovens, sinks or dishwashers, we have a range of products and solutions to meet the needs and demands of today’s foodservice environment.
RIGHT ACROSS FOODSERVICE WE’VE GOT YOU COVERED
Coffee Cooking Dish/Glass Washing
Ice Cold-Serve Drinks Waste Water
Vending
STANDARDS FOUND IN THIS GUIDE
• • • •
PROSOFT™
HE Water Softeners...........................................Non-Electric Water Softeners............................Hot Water Softeners..........................................Tradeline Water Softeners.................................
PROFILT™
PROFILTR Protect...............................................PROFILTR Control...............................................PROFILTA - Everpure®* Replacements.................PROFILTA Water Boiler Filter..............................Venda In-Line Cartridges....................................Tradeline Ionex™ Calcium Treatment Filters......
PRORO™
Reverse Osmosis Machines...............................
PROLIFT™
Water Lifting Pump Solution..............................
ULTIMATE™
Softener Salt......................................................
COMMERCIAL RANGEEDC and Duplex Softeners.................................
ESSENTIALS.....................................................
CHARTS AND TABLESMonarch-Everpure®* Filter Comparison Chart...Water Hardness Conversion Table.....................Monarch Servicing.............................................
Opening Hours: Monday-Friday08:30-17:0001986 [email protected] monarchwater.co.uk/foodservicelinkedin.com/company/monarch-water-limitedMonarch Water Ltd, Fair Green, Diss, Norfolk. IP22 4DG
Payment: BACS, Cheque, All Major Credit/Debit Cards
Delivery: Our aim is to deliver your orders as quickly and efficiently as possible.
Orders** are packed and despatched for standard next-day delivery for all orders before 13:00.
6 - 78 - 910 - 1112 - 13
14 - 1516 - 1718 - 19202122 - 23
24 - 25
26 - 27
28 - 29
30 - 33
34 - 39
404142
WE’RE HERE TO HELP
4
MONARCH WATER FOODSERVICE PRODUCT GUIDE
WATER QUALITY MATTERSOPERATIONALLY. FINANCIALLY. ETHICALLY
[email protected] | monarchwater.co.uk/foodservice | 01986 784759
INT
RO
DU
CT
ION
4 5
PROTECT
The right water treatment will protect catering and hot beverage equipment from the harmful effects of limescale build-up and corrosive minerals such as chlorides, to ensure continued service and longer equipment life.
PREVENT
Benefit from the protection of water treatment. Unprotected, equipment failure will lead to increased costs through service calls and possible replacement costs as well as interruptions to service through equipment downtime.
IMPROVE
Improve the taste, colour and odour of coffee and drinking water with water filters offering superior filtration and blending capabilities to deliver outstanding premium quality water.
REDUCE
Reduce energy costs through efficiently operating equipment. Reductions in downtime mean customers get the same consistent, quality experience, every time. Whilst running and replacement costs are all reduced to the benefit of both operator and customer.
WE’RE HERE TO HELP
6 7
AUTOMATIC COLD HE WATER SOFTENERS
ModelDims
H x W x D (mm)Daily Cap (300 ppm)
Max Op. Temp (°C)
Connection Code
CS100HE 480 x 275 x 485 1,471 50 3/4” Male CS100HECS150HE 555 x 275 x 485 2,280 50 3/4” Male CS150HECS200HE 710 x 275 x 485 3,420 50 3/4” Male CS200HECS300HE 1038 x 275 x 485 4,350 50 3/4” Male CS300HE
SPECIFICATION
PROSOFT™ AUTOMATIC SOFTENERS CLASS-LEADING NEXT-GEN EFFICIENCY & DESIGN 50°C
HIGH QUALITY RESULTS FOR GLASSES AND DISHES
INTELLIGENT TIMER CONTROLVolume override delivers peace of mind at busy times.
SALT ALARMLow level sensor to notify when you need to add salt.
SUPERFAST REGENIncredible 19 Minute top up regen cycle if ever required for continuous 24/7 service.
Call us on01986 784759
for all your softener salt
WA
TE
R S
OF
TE
NE
RS
6 [email protected] | monarchwater.co.uk/foodservice | 01986 784759
Our WRAS approved PROSOFT CS Cold Water Automatic Softeners meet the needs of even the most demanding kitchen layout, service or equipment.
Available in a specification friendly, one-size footprint and offered in 4 models, softening up to 4350 litres between regens, the range comes packed with advanced features including Opti-Brining, a self-protect programme, electronic digital programmer and free-flow valve technology.
SCALE PREVENTION. EQUIPMENT PROTECTION
PERFECT FORDishwashers • Undercounter • Hood • Rack-Conveyor • Flight • Glasswashers • Coffee Machines• Ice Machines • Combi Ovens • Hot Water Boilers • Laundry Washing Machines
OPTI-BRININGRegenerates only the resin that has been exhausted, saving up to 56% on salt running costs compared to other meter control softeners.
ONE-SIZE FOOTPRINTCAD, Specifier & Space friendly design - all models with same footprint.
SUPERIOR RESULTSProfessional performance and perfect clean and sparkling results every time.
ENERGY SAVINGUses less water per regeneration than any other comparable softener.
UKCA and CE approvals • Suitable for 15, 22, 28mm supplies • Auto adjusts to GMT and BST time changes • 2 years parts and 1 year labour guarantee • Includes water hardness test kit and drain hose • 220v 3 pin plug with inline transformer
Optional Rapid-Fit bypass - reduces components by 80%
Robust design for quick andeasy installation
Digital display for easy control and programming
Check out our range of Ultimate™ softener salt
on pages 28 and 29
8 9
ModelDims
H x W x D (mm)Daily Cap (300 ppm)
Max Op. Temp (°C)
Connection Code
Duo 500 x 250 x 500 1,520 50 3/4” Male DP024Duo Plus 730 x 300 x 625 3,040 50 3/4” Male DP026
50°C
The WRAS Approved PROSOFT Non-Electric Cold Water range offers the highest specification for its type of softener in the UK. Softening between 1520 and 3040 litres between regenerations, these innovative softeners require no electricity and come with a range of advanced features ideal for areas of high wash downs.
Peace of mind comes as standard, delivering longer equipment life, fewer service callouts and reduced running costs by protecting equipment from limescale.
SCALE PREVENTION. EQUIPMENT PROTECTION
PERFECT FOR
Dishwashers • Undercounter • Hood • Rack-Conveyor • Flight •Glasswashers • Coffee Machines• Ice Machines • Combi Ovens • Hot Water Boilers • Laundry Washing Machines
TWIN-TANK SYSTEM24/7 Protection thanks to the internal twin-tank duplex design.
NON-ELECTRIC ADVANTAGEOperates using the power of moving water.
EASY INSTALL. EXTRA RELIABILITYNo programming required.
REDUCED INSTALLATION AND RUNNING COSTSNo power means no electricity costs.
HIGH QUALITY RESULTS FOR GLASSES AND DISHES
Optional Rapid-Fit bypass - reduces components by 80%
Cylinder A is standing byCylinder B is softening
Cylinder A is softeningCylinder B is regenerating
Cylinder A is softeningCylinder B is standing by
Cylinder A is regeneratingCylinder B is softening
Red hard water | Blue soft water | Orange brine used to recharge resin. At no time does brine enter the water supply
WA
TE
R S
OF
TE
NE
RS
8 [email protected] | monarchwater.co.uk/foodservice | 01986 784759
AUTOMATIC COLD NON-ELECTRIC WATER SOFTENERS
SPECIFICATION
NON-ELECTRIC AUTO SOFTENERSFLEXIBLE, COST-EFFECTIVE 24/7 PROTECTION
UKCA and CE approvals • Suitable for 15, 22, 28mm supplies • Includes drain hose• 2 years parts and 1 year labour guaranteeNote: No test kit supplied with Duo’s as not required.
LESS WASTE. GREATER SAVINGSAccurately regenerates when needed, resulting in less waste and greater savings.
EFFICIENT DUPLEX CONTROLDuo backwash regenerates from the bottom up for more even and efficient use of the resin.
HIGH-CAPACITY RESINHigh Capacity, Food Grade Resin for more efficient scale prevention.
DUO MODEL
10 11
The PROSOFT hot water range consists of 4 models that can soften water up to an operating temperature of 70°C. Ideal for warewashing and laundry, providing significantly better wash results and protecting equipment from scale.
These softeners use an ultra reliable, easy to set, 12 day time clock that allows the installer to simply set the time of day and regeneration frequency; this process takes less than one minute.
The models have an optional hot water bypass that makes installation that little bit easier, removing the need for separate isolating valves being fitted to the existing pipework.
SCALE PREVENTION. EQUIPMENT PROTECTION
PERFECT FOR
Dishwashers • Undercounter • Hood • Rack-Conveyor • Flight • Glasswashers• Laundry Washing Machines
AUTOMATIC HOT WATER SOFTENERS
ModelDims
H x W x D (mm)Daily Cap (300 ppm)
Max Op. Temp (°C)
Connection Code
HW70/10 685 x 315 x 510 1,730 70 3/4” Male HW7010HW70/15 685 x 315 x 510 2,595 70 3/4” Male HW7015HW70/20 1140 x 315 x 510 3,460 70 3/4” Male HW7020HW70/30 1140 x 315 x 510 5,190 70 3/4” Male HW7030
OPERATES UP TO 70°CSuitable for a wide range of hot water use applications.
FOUR MODELSFour models across the range to suit all needs.
ONE-SIZE FOOTPRINTCAD, Specifier & Space friendly design - all models with same footprint.
SUPERIOR RESULTSProfessional performance and perfect clean and sparkling results every time.
AUTOMATIC HOT WATER SOFTENERSPROFESSIONAL PERFORMANCE. SUPERIOR RESULTS 70°C
ACS, KTW, UKCA and CE approvals • Suitable for 15, 22, 28mm supplies • 2 years parts and 1 year labour guarantee • 220v 3 pin or fused spur connection • Includes drain hose and water hardness test kit
HIGH QUALITY RESULTS FOR GLASSES AND DISHES
QUICK-SET TIME & DAY REGENERATIONEasy user control and experience.
RELIABLE, TIMED REGENERATIONSFor complete peace of mind.
PROTECT EQUIPMENTPrevents expensive breakdowns.
Call us on01986 784759
for all your softener salt
Check out our range of Ultimate™ softener salts on
pages 28 and 29
WA
TE
R S
OF
TE
NE
RS
10 [email protected] | monarchwater.co.uk/foodservice | 01986 784759
SPECIFICATION
Optional integrated hot water bypass available on all models
Ultra reliable stainless steel hot
water valve
Includes complimentary water test kit
12 13
SPECIFICATION
ModelDims
H x W x D (mm)Daily Cap(300 ppm)
Max Op. Temp (°C)
Connection Code
T100/T 537 x 275 x 455 1,167 50 3/4” Male T100TT150/T 612 x 275 x 455 2,075 50 3/4” Male T150TT200/T 765 x 275 x 455 3,113 50 3/4” Male T200T
UKCA and CE approvals • ACS, KTW, W270 accreditations on the vessel • Suitable for 15, 22, 28mm supplies • 12 months parts and labour guarantee • 220v 3 pin or fused spur connection• Includes drain hose and water hardness test kit
TRADELINE AUTOMATIC SOFTENERS BALANCING QUALITY, RELIABILITY & VALUE
SCALE PREVENTION. EQUIPMENT PROTECTION
PERFECT FOR
Dishwashers • Undercounter • Hood • Rack-Conveyor • Flight • Glasswashers • Coffee Machines• Ice Machines • Combi Ovens • Hot Water Boilers • Laundry Washing Machines
Our Tradeline range of cold water softeners arrive with a user-friendly design and all the reliability, build quality and water softening capabilities you would expect from Monarch Water but at a budget-friendly, cost-effective pricing point.
The range contains models that can soften water between 1167 and 3113 litres between regenerations, giving a diverse choice depending on business needs.
AUTOMATIC COLD WATER SOFTENERS
50°C
THE TRADELINE ADVANTAGEGreat value for money. All the reliability and build quality you would expect from Monarch.
ONE-SIZE FOOTPRINTCAD, Specifier & Space friendly design - all models with same footprint.
REDUCE RUNNING COSTSRemoves existing and prevents new scale.
HIGH QUALITY RESULTSSuperb performance and perfect clean and sparkling results every time.
HIGH QUALITY RESULTS FOR GLASSES AND DISHES
Optional Rapid-Fit bypass - reduces components by 80%
12 MONTHS PARTS/LABOUR GUARANTEEFor complete peace of mind.
SLIDE ON DUST/SPLASH COVERComplete protection of the control valve at all times.
SUITABLE FOR A RANGE OF SUPPLIES15, 22, 28mm.
Call us on01986 784759
for all your softener salt
Check out our range of Ultimate™ softener salts on
pages 28 and 29
Reliable mechanicaltimer valve
WA
TE
R S
OF
TE
NE
RS
12 [email protected] | monarchwater.co.uk/foodservice | 01986 784759
14 15
Limescale Reduction and Microfiltration
The PROFILTR PROTECT offers all round protection resulting in limescale reduction, microfiltration and taste improvement in one multi-stage product.
The PROFILTR PROTECT offers owners a water filter with such versatility and range that we recommend it for use across Foodservice. The filter refines water quality, making it ideal for hot drinks, coffee and vending applications. In addition, it provides critical protection by preventing the build-up of limescale, making it an ideal filter for steam equipment such as combi-ovens, helping avoid breakdown and expensive downtime.
The PROFILTR cartridge has been designed with its fittings stamped directly onto the top of the filter cartridge, reducing height requirements by as much as 30% and providing an easy fit or swap-out replacement.
REDUCE SCALE. IMPROVE WATER QUALITY
PERFECT FOR
Espresso machines • Bean to Cup Coffee Systems • Combination/Steam Ovens • Bratt Pans• Bain Maries • Vend and General Coffee Equipment • Ice machines • Drinks Stations
PROFESSIONAL WATER FILTERS
PREMIUM PROTECTION ACROSS FOODSERVICEAgainst limescale, chlorine, bad tastes and odours.
HIGH EFFICIENCY FOOD GRADE RESINProtects against any pH issues for optimal limescale protection.
0.5uM INTERNAL CARBON BLOCKHigh quality protection against cysts.
PROFILTR™ PROTECTVERSATILE FILTRATION FOR HOT DRINKS AND STEAM
SPECIFICATION
ModelDims
H x D (mm)
Capacity at 180ppm 0%
blend
Operating Temp (°C)
Flow rate (lpm)
Pressure (bar)
Code
Protect 1000 385 x 135 3,535 4-30 2.5 2-6 P1000Protect 2000 395 x 173 5,330 4-30 3.5 2-6 P2000Protect 3000 464 x 173 7,125 4-30 4.5 2-6 P3000
pH
PR
OT
EC
T
Don’t forget to add your Monarch digital
meter
VERSATILE PROTECTION
INTEGRATED BLENDING & FLUSH VALVESIntegrated head for tailored water and quick start.
PREMIUM QUALITY WATERRefines water quality for great tasting coffee and hot beverages.
1
2
3
4
5
Integrated bypass
PROFILTR TECHNOLOGY MULTI-STAGE FILTRATION
Micrometric prefiltration
Integrated by-pass for hardness adjustment
Optimised inlet flow upper distributor for superfine filtration
Bed of ion high efficiency exchange resins
Bacteriostatic post-filtering stage to eliminate odours and chlorine compounds and ensure action against bacterial growth
Integratedflushing valve
WA
TE
R F
ILT
ER
S
14 [email protected] | monarchwater.co.uk/foodservice | 01986 784759
16 17
Limescale Reduction with pH Control & Microfiltration
The PROFILTR CONTROL delivers advanced water filter technology offering both premium quality water for coffee and hot beverages as well as protecting equipment from corrosion by delivering a balanced level of acidity.
Thanks to its multi-stage filtration and High Efficiency Ion Exchange Resin, the PROFILTR CONTROL returns excellent capacities, providing balanced pH levels. Maintaining a consistent, balanced level of acidity throughout its lifespan, the PROFILTR CONTROL delivers a premium tasting coffee and provides machine and equipment protection against corrosion and limescale build-up.
The PROFILTR CONTROL’s integrated by-pass allows for fine-tuning of the water, providing an additional level of control to deliver a truly controlled, premium quality water experience.
REDUCE SCALE. IMPROVE WATER QUALITY
PERFECT FOR
Espresso machines • Bean to Cup Coffee Systems • Combination/Steam Ovens • Bratt Pans• Bain Maries • Vend and General Coffee Equipment • Ice machines • Drinks Stations
PROFESSIONAL WATER FILTERS
SPECIFICATION
ModelDims
H x D (mm)
Capacity at 180ppm 0%
blend
Operating Temp (°C)
Flow rate (lpm)
Pressure (bar)
Code
Control 1000 385 x 135 3,075 4-30 2.5 2-6 C1000Control 2000 395 x 173 4,612 4-30 3.5 2-6 C2000Control 3000 464 x 173 6,150 4-30 4.5 2-6 C3000
MAINTAINS pH LEVELS IN WATERHigh quality results for perfect coffee. Consistently, everytime.
PROTECT & PREVENTOptimal scale prevention. Ideal water for protecting coffee and hot beverage equipment and preventing breakdown.
0.5uM INTERNAL CARBON BLOCKHigh quality protection against cysts.
HIGH EFFICIENCY FOOD GRADE RESINMaintains pH Levels for optimal limescale prevention.
PROFILTR™ CONTROLADVANCED WATER FILTRATION FOR COFFEE pH
CO
NT
RO
L
VERSATILE PROTECTION
INTEGRATED BLENDING & FLUSH VALVESIntegrated head for tailored water and quick start.
PREMIUM QUALITY WATER - FINE TUNEDDelivering controlled, recipe quality water for great tasting coffee and hot beverages.
PROFILTR TECHNOLOGY MULTI-STAGE FILTRATION
1
2
3
4
5
Micrometric prefiltration
Integrated by-pass for hardness adjustment
Optimised inlet flow upper distributor for superfine filtration
Bed of ion high efficiency exchange resins
Bacteriostatic post-filtering stage to eliminate odours and chlorine compounds and ensure action against bacterial growth
Integrated bypass
Integratedflushing valve
WA
TE
R F
ILT
ER
S
16 [email protected] | monarchwater.co.uk/foodservice | 01986 784759
18 19
PROFILTA™ CARTRIDGESCTO, COLD CUP & DRINKING WATER
PROFILTA’s range of Carbon and Submicron Carbon Block water filters for drinking water are compatible with Everpure®* systems and heads. They deliver an ideal, cost-effective solution for operators to meet their exactwater requirements based on equipment or desired water quality.
PROFESSIONAL WATER FILTERS
ModelDims
H x D (mm)Capacity
(Ltrs at 180ppm)Code
MW00510C 0.5 uM carbon block 254 x 86 13,957 MW00510CMW00514C 0.5 uM carbon block 350 x 86 25,882 MW00514CMW0520C 5 uM carbon block 512 x 86 34,068 MW0520CMW00520C 0.5 uM carbon block 512 x 86 34,068 MW00520C
PROFILTA’s range of Carbon and Submicron Carbon Block water filters for hot drinks are compatible with Everpure®* systems and heads. They deliver an ideal, cost-effective solution for operators to meet their exact water requirements based on equipment or desired water quality as well as incorporating ScaleStop media to prevent scale build up.
ModelDims
H x D (mm)Capacity
(Ltrs at 180ppm)Code
MW00510CS 0.5 uM carbon block & Scalestop 254 x 86 13,957 MW00510CSMW00514CS 0.5 uM carbon block & Scalestop 350 x 86 25,882 MW00514CSMW0520CS 5 uM carbon block & Scalestop 512 x 86 34,068 MW0520CSMW00520CS 0.5 uM carbon block & Scalestop 512 x 86 34,068 MW00520CS
Reduces chlorine, bad tastes and odours. Provides fresh tasting water for hot drinks.
PERFECT FOREspresso machines | Bean to Cup Coffee Systems | Combination/Steam Ovens | Bratt Pans | Bain Maries | Vend and General Coffee Equipment | Ice Machines | Drinks Stations
PERFECT FORIce Machines | Drinks Stations | Drinking Fountains
Reduces chlorine, bad tastes and odours. Provides fresh, clean tasting drinking water.
*Everpure® is a registered trademark of Everpure Inc.
PROFILTA™ CARTRIDGESCOFFEE & HOT BEVERAGES
EVP®* COMPATIBLE
PROFILTA™ SPECIALSSANI, REMIN AND UF
EVP®* COMPATIBLE HEADS
Increases mineral content to negate pH drop in R.O. or similar water.
Uses food-grade citric acid, with descaling assistance.
PROFILTA’s REMIN is a high quality remineralisation cartridge specifically designed for product water post R.O. treatment.
*Everpure® is a registered trademark of Everpure Inc.
Our extensive range of PROFILTA cartridges are fully compatible with Everpure®* QL and QC heads. Monarch MWAH38/M heads incorporate auto shut off facility if used with Monarch cartridges.
PROFILTA’s SANI is a superior sanitisation cartridge that is ideal for applications and associated pipework that need a thorough internal cleanse.
PROFILTA’s UF premium drinking water filter gives superior taste, odour and colour with a 3-in-1 multiple filtration with chlorine and hazardous chemical reduction. Ultra filtration with extremely low pressure drops.
Absolute 0.1 Micron ultra protection (0.1uM absolute rating for bacteria log 8 reduction)
ModelH x D mm
Capacity(Ltrs at 180ppm)
Code
MWSani10 254 X 86 - MWSANI10MWRemin20 512 X 86 20,888 MWREMIN20MWUF20 512 X 86 29,563 MWUF20
Model CodeMWAH38 MWAH38 MWAH38M MWAH38M MWAQA1 - equiv to QL1, QL2B, QL3B single heads MWAQA1 MWAQA2 - equiv to QL1, QL2B, QL3B duplex series heads MWAQA2MWAQA3 - equiv to QL1, QL2B, QL3B triplex series heads MWAQA3
MWAQA3MWAQA2MWAH38 MWAH38M MWAQA1
WA
TE
R F
ILT
ER
S
18 [email protected] | monarchwater.co.uk/foodservice | 01986 784759
20 21
PROFESSIONAL WATER FILTERS
PROFILTA™ WATER BOILER CARTRIDGEREPLACEMENT FILTER FOR WATER BOILERS
The PROFILTA Water Boiler replacement cartridge equivalent to the 3M®* AP2-C401-SG for Lincat & Burco Water Boilers. With an extended service life, the polyphosphate carbon filter can last for up to 4000 litres.
High Quality Carbon Block improves the water quality by removing chlorine, sediment and other impurities, resulting in better tasting hot beverages & coffee.
The cartridge also contains a scale inhibitor to protect the boiler by preventing limescale from building up and offer additional peace of mind. The PROFILTA Water Boiler filter, if changed in accordance with usage or annually, will prolong the life of the water boiler and save money and time in unnecessary service costs and downtime.
1uM FILTER
COMPACT SIZE
EASY-CHANGE CARTRIDGE
REDUCE SCALE. IMPROVE TASTE
PERFECT FORLincat & Burco Water Boilers - Lincat F Series, EB3F, EB4F, EN6F, EB6F, EB3F/PB, EB6TF, Burco BCPLSAFCT10L, BCPLSAFWM5L, BCAFCT10LPB, BCPLSAFCT20
ModelDims
H x D (mm)Capacity
(Ltrs at 180ppm)Code
MW01-AP2CS - 1.0 uM carbon block & Scalestop rep cart 240 x 45 4,000 MW01AP2CS
SPECIFICATION
*3M® is a registered trademark.
VENDA IN-LINE WATER FILTERS FOR VENDING, HOT BEVERAGE, COFFEE, TEA, ICE & DRINKS
A range of compact, slim, in-line water filters for the prevention of scale and the removal of chlorine, bad tastes and odours.
PREVENTS LIMESCALE (V11CS)
COMPACT SIZE
EASY-CHANGE CARTRIDGE
REDUCE SCALE. IMPROVE TASTE
PERFECT FORCoffee Machines • Water Coolers • Water Fountains • Small Ice Machines • Drinks Stations• Fridges
ModelDims
H x D (mm)Capacity
(Ltrs at 180ppm)Code
Venda in-line water filter w/ scale prevention 240 x 45 6,600 V11CSVenda in-line water filter 240 x 45 7,500 V11C
SPECIFICATION
REMOVES CHLORINE, BAD TASTES AND ODOURS
REMOVES HERBICIDES, PESTICIDES AND ORGANICS
WA
TE
R F
ILT
ER
S
20 [email protected] | monarchwater.co.uk/foodservice | 01986 784759
22 23
Whatever water treatment requirements are needed in Foodservice, the IONEX Calcium Treatment Filter has it covered. Designed to deliver no-nonsense protection against limescale and improve water quality, the IONEX offers simplicity & flexibility in the most cost-effective package on the market.
One Filter • One Head • Multiple Sizes • Multiple Applications
IONEX Calcium Treatment Filters offer the winning combination of decades of real-world use, proven success, large capacities, flexibility, and outstanding value.
PREVENT SCALE. IMPROVE WATER QUALITY
PERFECT FOR
Combi Ovens • Coffee Machines • Ice Machines • Vending Machines • Small Warewashing Equipment
PROFESSIONAL WATER FILTRATION
Description Dims H x W x D (mm) 180ppm 0% blend CodeIONEX5/CFU5 517 x 165 x 210 4,273 IONEX5IONEX10/CFU10 517 x 215 x 235 7,381 IONEX10IONEX15/CFU15 564 x 268 x 268 11,266 IONEX15IONEX18/CFU18 564 x 268 x 268 13,598 IONEX18IONEX23/CFU23 689 x 268 x 268 17,482 IONEX23IONEX40/CFU40 699 x 349 x 349 29,526 IONEX40
IONEX INTEGRATED BLENDER 0-55% & CORROGUARD BEADS
IONEX™
CALCIUM TREATMENT FILTERS - 0-55% BLENDED
ONE FILTER - MULTIPLE APPLICATIONS
QUICK SWAP HEADEasy install & quick replacement. Incorporates Flexi-Fit System with Auto-Shut-Off and Flushing Valve. Available in 2 or 3 Port configuration*.
VARIBLEND TECHNOLOGYTailored water allows for flexibility of exact water requirements to suit and adapt to any application.
REMOVE THE HASSLE - ONE FILTER - MANY USESOne Filter - Just choose size and dial in required water quality.
OPTIMAL WATER FOR TOTAL PROTECTIONCGM Beads deliver optimum water quality to guard against corrosion and limescale.
SUSTAINABLE - REUSE OR RECYCLE - 100% GREEN 100% Recyclable product - Replace or Reuse - Keep on site & refill.
WQA and ANSI approvals for resin • Dimensions based on standard 3/4” straight connectors*see page 36 for 3-Port Adapter
Available in 6 sizes!
IONEX SEALED EXCHANGE BOTTLES INCORPORATING RESIN(with Corroguard beads)
IONEX REPLACEMENT RESIN PACKS C/W CORROGUARD BEADS
Connections: Standard issue 3/4” mbsp. Other connection options available, details on request.
Description 180ppm 0% blend CodeIONEX5-R/CFU5-R 4,273 IONEX5RIONEX10-R/CFU10-R 7,381 IONEX10RIONEX15-R/CFU15-R 11,266 IONEX15RIONEX18-R/CFU18-R 13,598 IONEX18RIONEX23-R/CFU23-R 17,482 IONEX23RIONEX40-R/CFU40-R 29,526 IONEX40R
Description CodeIONEX5-RP/CFU5-RP IONEX5RPIONEX10-RP/CFU10-RP IONEX10RPIONEX15-RP/CFU15-RP IONEX15RPIONEX18-RP/CFU18-RP IONEX18RPIONEX23-RP/CFU23-RP IONEX23RPIONEX40-RP/CFU40-RP IONEX40RP
CALCIUM TREATMENT FILTERS W/ VARIBLEND 0-55% VALVE
Variblendtechnology
PROTECT EQUIPMENTPrevents Limescale from forming to prolong equipment life & save on expensive new purchases.
PREVENT BREAKDOWNProtect equipment from scale build-up. Save time & money on callouts & avoid kitchen downtime.
PREMIUM WATER FOR HOT BEVERAGES Improves taste, colour & odour of coffee and other hot beverages.
Flexi-Fit for quick exchange
Multipleapplications
FIL
TE
R
WA
TE
R F
ILT
ER
S
22 [email protected] | monarchwater.co.uk/foodservice | 01986 784759
24 25
Reverse Osmosis offers the ultimate water purification and treatment for both coffee and steam applications. RO will remove more than 97% of the TDS (Total Dissolved Solids) from the water.
Reverse Osmosis is the only water treatment process that removes Chlorides, which left untreated, will corrode and damage equipment leading to expensive replacement costs, service calls and inevitably, kitchen downtime.
Removing all minerals, particulates and chlorine from the water provides a consistent baseline of ‘clean’ water to work with. This allows professional baristas to re-introduce minerals and flavours to create new and unique hot beverages, as well as consistently producing high-quality coffee, time after time. Combining quality water with the right equipment, beans and recipe delivers truly exceptional results.
Over the life-cycle of machine equipment, Reverse Osmosis is a cost-effective solution delivering maximum protection and consistency.
PROFESSIONAL REVERSE OSMOSIS MACHINES
SPECIFICATION
Model Dims H x W x D (mm) Lphr Code
PRORO16 390 x 235 x 385 16-18 PRORO16PRORO90 400 x 460 x 170 90-95 PRORO90PRORO120 400 x 460 x 170 115-120 PRORO120PRORO240 400 x 460 x 170 230-240 PRORO240
PRORO™ 16 | 90 | 120 | 240
PROFESSIONAL REVERSE OSMOSIS MACHINE
PURE WATERRemoves bacteria, organic matter, inorganic matter, metal ions, radioactive substances in the water.
INTELLIGENT WATER CONTROLDigital control, showing key information such as TDS/remaining cartridge life of of the raw and purified water.
HIGH EFFICIENCYFor every 1 litre of purified water our units produce, only 1 litre of impure water goes to drain*.
PURE WATER. REMOVES CHLORIDES
PERFECT FOR
Glass Washers • Dishwashers • Ice machines • Combi-Steam Ovens • Coffee Machines• Purified Table Water • Hot Water Boilers • Vending Machines
Full installation kit included
* 1:1 efficiency rating is pressure dependent
PUREST, CLEANEST WATER
PRORO901 x C1 Pre-Filter 1 x 600 GPD RO Membrane1 x Remin Post Filter
PRORO1201 x C1 Pre-Filter 1 x 800 GPD RO Membrane1 x Remin Post Filter
PRORO2401 x C1 Pre-Filter 2 x 800 GPD RO MembraneChoice of optional post filters available - details on request.
Storage vessels available in range of sizes to suit all your
needs
PRORO161 x Sediment Pre-Filter 1 x GAC Filter 1 x Carbon Block Filter 1 x 125 gpm Membrane 1 x Remin Post Filter
Integrated4.4 litre tank
Model CodePRORO16 replacement cart set PRORO16RCPRORO16 replacement membrane PRORO16RM
REPLACEMENT CARTS AND MEMBRANES
Model CodePRORO90 replacement cart set PRORO90RCPRORO90 replacement membrane PRORO90RMPRORO120 replacement cart set PRORO120RCPRORO120 replacement membrane PRORO120RMPRORO240 replacement cart set PRORO240RCPRORO240 replacement membrane PRORO240RM
REPLACEMENT CARTS AND MEMBRANES
RE
VE
RS
E O
SM
OS
IS
24 [email protected] | monarchwater.co.uk/foodservice | 01986 784759
26 27
Model Dims H x W x D (mm) Operating temp (°C) CodePROLIFT 322 x 290 x 380 60 PROLIFT
The PROLIFT Grey Water Lifting Pump has been designed to automatically pump hot waste water from combi ovens, dishwashers and similar machines when a low-level drain is not available. At 380mm deep, 290mm wide and 322mm high, the PROLIFT is extremely compact, adding to its versatility. The PROLIFT will pump waste water from many locations such within a commercial kitchen environment.
PROLIFT will pump to a maximum head of 5m vertical and 50m horizontal, from as low as 110mm off the floor. The unit’s high head pumping capabilities enable it to handle difficult, awkward or long discharge pipe runs.
The PROLIFT can be customised to suit the required installation pipe layout. The material also lends itself to shrugging off any internal grease to make cleaning much easier and comes complete with a corrosion resistance pump.
PUMPS WASTEWATER TO 5M HEAD WHEN NO DRAIN AVAILABLE
PERFECT FOR
Combi Ovens • Sinks • Wash Basins • Dishwashers • Taps
PROFESSIONAL WATER PUMPS
SPECIFICATION
PUMPS UP TO 5 METER HEADFrom as low as 110mm from the floor.
INTEGRATED ACTIVATED CHARCOAL For the removal of unpleasant smells.
HIGHLY DURABLE Made from strong Polyethylene Laminate.
COMPACT, QUIET AND POWERFULEasy to own, easy to install.
PROLIFT™
FLEXIBLE WASTE WATER LIFTING PUMP SOLUTION 5m
AUTOMATIC WASTE WATER PUMP
SET UP ANYWHERENo drain required, no problem.
CAN HANDLE LARGE SOLIDSUp to 10mm.
VERTICAL, SINGLE-STAGE, SUBMERSIBLEWith foot strainer (10mm x 40mm).
VOLUTE CASINGWith 1¼” (male) radial pressure branch.
DIMENSIONS (mm)
WA
TE
R P
UM
PS
26 [email protected] | monarchwater.co.uk/foodservice | 01986 784759
28 29
Top Quality Branded Salt • Fast Delivery • Nationwide
We offer the highest quality Food Grade Salt tested to BS: EN973 Class A and HR Approval No: 24.00024/A, with our tablet and granular salt complying with ECHA 528-2012 regarding biocidalprotection.
Delivery can be arranged anywhere in the UK. Available in deliveries from half or fullPallets, increasing to full lorry/container loads direct to site. Full details available on request.
MONARCH ULTIMATE™ TABLET - 25KG
Chemical Specification
Property Unit SpecificationAppearance - White crystalingAssay %m/m NaCl Min 99.4 Max 99.7Moisture %m/mH2O <0.25Insoluble Matter % <0.01Total Arsenic ppm 0.03Total Cadmium ppm 0.005Total Chrome ppm 0.05Total Mercury ppm 0.01Total Nickel ppm 0.05Total Lead ppm 0.05Antimony ppm 0.04Selenium ppm 0.05Anti-caking agent - 0
Block weight 10g approx.Block Appearance Pillow shaped (briquettes) 23x13x23mm
Typical Physical Characteristics
Approvals BS: EN973 - Class A HR Approval No: 24.00024/A
Bags per palletFull pallet - 45 (code MTS25). Half pallet 22 (code MTSHP25)
ULTIMATE™ SOFTENER SALT
YOUR NO.1 CHOICE FOR SALT - TABLET, GRANULAR AND BLOCK
SALT - TABLET, GRANULAR & BLOCK
MONARCH EURO BLOCKS - 8KG
Chemical Specification
Property Unit Typical AnalysisAppearance - White CrystalineAssay %m/m NaCl >=99.8Moisture %m/mH2O Max % 0.025Insoluble Matter mg/kg Max % 0.01Total Copper mg/kg Cu Max 0.13 mg/kgTotal Arsenic mg/kg As Max 0.047 mg/kgTotal Lead mg/kg Pb Max 0.087 mg/kgTotal Mercury mg/kg Hg Max 0.02 mg/kgAnti-caking Agent - 0
Block weight 4kg per block. Two blocks per packBlock Appearance Rectangular to fit all block salt softeners
Approvals BS: EN973 - Class ACertificate No: QMS/13-0264
Typical Physical Characteristics
Chemical Specification
Property Unit SpecificationAppearance - White cubic crystalsAssay %m/m NaCl Min 99.4 Max 99.7Moisture %m/mH2O <0.25Insoluble Matter % <0.01Total Arsenic ppm 0.03Total Cadmium ppm 0.005Total Chrome ppm 0.05Total Mercury ppm 0.01Total Nickel ppm 0.05Total Lead ppm 0.05Antimony ppm 0.04
Grain size 97% at 2-6mm
Typical Physical Characteristics
Approvals BS: EN973 - Class A HR Approval No: 24.00024/A
Bags per palletFull pallet - 45 (code MGS25). Half pallet 22 (code MGSHP25)
Blocks per palletFull pallet - 161 (code BSB8). Half pallet 69 (code BSBHP8)
MONARCH ULTIMATE™ GRANULAR - 25KG
FOOD GRADE SALTS
OF
TE
NE
R S
AL
T
28 [email protected] | monarchwater.co.uk/foodservice | 01986 784759
30 31
ModelValve
H1Vessel
H2Brine tank
H3Softener
HtInlet/Outlet
HtVessel
B1Brine Tank
B2Weight (*)
KgEDC20/44 19 89 44 108 74 22 32sq 27EDC30/44 19 89 89 108 94 27 32sq 40
EDC 40/44 19 112 84 131 117 27 44sq 50EDC 50/44 19 139 84 158 144 27 44sq 65EDC 60/44 19 123 84 142 128 32 44sq 75
EDC 75/44 19 140 83 159 145 34 67Ø 90
EDC 100/44 19 168 83 187 173 37 67Ø 118EDC 125/44 19 168 83 187 173 37 67Ø 140
The EDC (Electronic Demand Control) range keeps pace with everyday needs, guaranteeing high efficiency and low running costs. The control valve has a built-in water meter to measure the amount of water you use, then it automatically activates a regeneration at 2am, a time when little, if any, water is being used.
COMMERCIAL SOFTENERS
OPTI-BRINING AS STANDARDSaves up to 56% on salt against other industry models.
RELIABLE CONTROLLERMeasures and remembers your daily water consumption.
LOW SALT AND WATER USEOnly regenerates when necessary based on actual water needs.
400 MICRON INJECTOR PROTECTIONPrevents injector blockages and subsequent overflows.
EDC SOFTENERS
EDC SIMPLEX SOFTENER
1”
DIMENSIONS (CM)
All measurements can vary due to the cooling process during manufacture of the vessels and brine tanks.(*) estimated weight of the system without water or salt.
GENERAL CONDITIONS FOR INSTALLATION
Connection IN and OUT:Option side mount:Drain connection(*):Electrical rating:Max power rating:IP protection class:Minimum inlet pressure:Maximum inlet pressure:Vacuum:Average pressure loss (**):Min-max water temperature:Remarks(*) Dependent on Drain line flow control.(**) Under normal circumstances.It is alwasy recommendedto install a 25µ cartridge filter before a softener.
RESINTypeLife span
ION EXCHANGE (FOR AVERAGE SALT CONSUMPTION OF 150 g/L)
REGENERATIONStart
Total time min :
Remarks When sizing an EDC softener, the interval between regenerations should not be more than 4 days, to prevent tracking of water through the vessel.
FLOW RATE
CONSUMPTION OF RINSE WATER
1” male (1.25” available on request)N/A3/4” or 1” for DLFC flows over 10 gpm230V 50Hz 12V Transformer6WDouble isolated transformer200 kPa (2 bar)600 kPa (6 bar)no allowance100 kPa (1 bar)5-35°C
: Strong acid cation resin - softening food grade quality: 15 years under normal circumstances
Default Time 2:am, set on the timer as (delayed regeneration)Options: TIME - VOLUME - IMMEDIATE - DELAYED- DAYS OVERIDE and manual regeneration.
Litres of resin 20 30 40 50 60 75 100 125
Capacity kg CaCO2 1 1.5 2 2.5 3 3.8 5 6.3
M1 @ 300ppm 3.3 5 6.6 8.3 10 13 17 21Salt consumption kg / regen 3 4.5 6 7.5 9 11 15 19
67 79 71 81 73 75 97 97
Litres of resin 20 30 40 50 60 75 100 125
Peak flow m3hr 1.2 1.8 2.4 3.0 3.6 4.5 6.0 7.5Minimal 60
Litres of resin 20 30 40 50 60 75 100 125
1. Backwash litres 32 52 52 52 74 95 95 95
2. Brining + Slow litres 67 124 102 110 153 188 263 2464. Fast rinse litres 39 62 62 62 89 114 114 114Total *** litres 138 238 216 224 316 397 472 455
ELECTRONIC DEMAND CONTROL SOFTENERS
(***) figures based on 60 PSI pressure
Optional assemblyand
commissioningservice available
Models available up to 2” pipework - details on request
CO
MM
ER
CIA
L R
AN
GE
30 [email protected] | monarchwater.co.uk/foodservice | 01986 784759
32 33
ModelValve
H1Vessel
H2Brine tank
H3Softener
HtConnection
HtVessel
B1Softener
BtBrine Tank
B2Weight (*)
KgDS 10/44 19 42 44 61 47 22 45 32 sq 35DS 20/44 19 89 84 108 94 22 45 44 sq 56
DS 30/44 19 89 84 108 94 27 64 44 sq 75DS 40/44 19 112 84 131 117 27 64 44 sq 96DS 50/44 19 139 84 158 144 27 64 44 sq 115
DS 60/44 19 123 83 142 128 32 77 67Ø 147
DS 75/44 19 140 101 159 145 34 80 76Ø 180DS 100/44 19 168 93 187 173 37 92 87Ø 235DS 125/44 19 168 93 187 173 37 92 87Ø 280DS 150/44 19 167 124 186 172 41 96 87Ø 340DS 200/44 19 179 124 198 184 51 119 87Ø 440
Monarch duplex softeners have two softening vessels sharing the same salt tank. These two vessels are controlled by their own control valve each with its own built-in water meter. One vessel supplies soft water whilst the other remains on standby. When the required amount of soft water has been reached, this vessel begins an automatic regeneration with soft water then supplied from the previous standby unit. This role is then reversed when the next regeneration is due to ensure a continuous supply of soft water at all times.
COMMERCIAL SOFTENERS
24/7 ALTERNATING DUPLEX CONTROL
RELIABLE CONTROLLERMeasures and remembers your daily water consumption.
LOW SALT AND WATER USEOnly regenerates when necessary based on actual water needs.
400 MICRON INJECTOR PROTECTIONPrevents injector blockages and subsequent overflows.
DUPLEX SOFTENERS
DUPLEX SOFTENERAlternating Duplex/Duplex Standby (DS)
1”
DIMENSIONS (CM)
All measurements can vary due to the cooling process during manufacture of the vessels and brine tanks.(*) estimated weight of the system without water or salt.
GENERAL CONDITIONS FOR INSTALLATION
Connection IN and OUT:Option side mount:Drain connection(*):Electrical rating:Max power rating:IP protection class:Minimum inlet pressure:Maximum inlet pressure:Vacuum:Average pressure loss (**):Min-max water temperature:Remarks(*) Dependent on Drain line flow control.(**) Under normal circumstances.
RESINTypeLife span
ION EXCHANGE (FOR AVERAGE SALT CONSUMPTION OF 150 g/L)
REGENERATIONStart
Total time min :
Remarks When sizing a duplex softener, the interval between regenerations should not be more frequent than every 6 hours, to allow brine creation. Additionally, the interval between regenerations should not be more than 4 days, to prevent tracking of water through the vessel. In all cases, BV exchange should be considered in conjuction with the regeneration frequency calculated.
FLOW RATE
CONSUMPTION OF RINSE WATER
1.25” maleN/A3/4” or 1” for DLFC flows over 10 gpm230V 50Hz 12V Transformer6WDouble isolated transformer200 kPa (2 bar)600 kPa (6 bar)no allowance100 kPa (1 bar)5-35°C
: Strong acid cation resin - softening food grade quality: 15 years under normal circumstances
Default Time 2:am, set on the timer as (delayed regeneration)Options: TIME - VOLUME - IMMEDIATE - DELAYED- DAYS OVERIDE and manual regeneration.
DUPLEX SOFTENERS
(***) figures based on 60 PSI pressure
Optional assemblyand
commissioningservice available
Litres of resin 10 20 30 40 50 60 75 100 125 150 200
Capacity kg CaCO3 0.5 1 1.5 2 2.5 3 3.8 5 6.3 7.5 10
M1 @ 300ppm 1.6 3.3 5 6.6 8.3 10 13 17 21 25 33Salt consumption kg / regen 1.5 3 4.5 6 7.5 9 11 15 19 23 30
65 65 79 71 81 73 75 97 97 82 95
Litres of resin 10 20 30 40 50 60 75 100 125 150 200
1. Backwash litres 32 32 52 52 52 74 95 95 95 132 1702. Brining + Slow litres 72 67 124 102 110 153 188 263 246 282 4404. Fast rinse litres 39 39 62 62 62 89 114 114 114 159 204Total *** litres 143 138 238 216 224 316 397 455 455 573 814
Models available up to 2” pipework - details on request
Litres of resin 20 30 40 50 60 75 100 125
Peak flow m3hr 1.2 1.8 2.4 3.0 3.6 4.5 6.0 7.5Minimal 60
CO
MM
ER
CIA
L R
AN
GE
32 [email protected] | monarchwater.co.uk/foodservice | 01986 784759
34 35
Description Code3/4” x 3/4” white short interconnecting hose 10cm long. Straight x Elbow - single SIH34
3/8" x 3/4" stainless braided hose 1.5mtrs long. Straight x Elbow - single hose IHSH353/8" x 3/4" stainless braided hose 1.5mtrs long. Straight x Straight - single hose IHSB36
3/8" x 3/8" stainless braided hose 1.5mtrs long. Straight x Straight - single hose IHSB37
3/8" x 3/8" stainless braided hose 1.5mtrs long. Straight x Elbow - single hose IHSS383/4" x 3/4" white hoses 80cm long - single IOHS3/4" x 3/4" white hoses 80cm long - pair IOHP3/4" x 3/4" braided stainless hoses 60cm long - pair (suitable up to 65c) IHSS393/4" x 3/4" braided stainless hoses 100cm long - pair (suitable up to 80c) IHSS403/4" x 3/4" braided stainless hoses 150cm long - pair (suitable up to 80c) IHSS41
1" x 1" braided stainless hoses 60cm long - pair (suitable up to 80c) IHSS42
1" x 1" braided stainless hoses 100cm long - pair (suitable up to 80c) IHSS43
1.5" x 1.5" braided stainless hose 100cm long - single IHSS44
2" x 2" braided stainless hose 100cm long - single IHSS451/4" poly tubing - 30 mtrs - white MWDPE04303/8" poly tubing - 30 mtrs - white MWDPE06306mm polytubing - 30 mtrs - black MWDPE06M8mm polytubing - 30 mtrs - black MWDPE08M10mm polytubing - 30 mtrs - black MWDPE10M
HOSES AND TUBING(all hoses include relevent rubber/fibre washers and for cold water unless stated)
ESSENTIALS
PROFESSIONAL WATER TREATMENT ESSENTIALS
Description CodePresscontrol water booster pump - prewired - up to 60c PE50BP60
Presscontrol water booster pump - prewired - up to 65c PE50BP65
PUMPS
Description Code3/4" male bsp Rapid-Fit bypass for 15 & 22mm pipework RFBP34
15VK - 2no 15mm x 3/4" valves, 1no 15mm bypass valve & 1no 15mm nrv 15VK15mm install kit: 2no white hoses (IOHS), 1x 15mm x 3/4" iso valve and 1x 15mm nrv IK152
15mm install kit: 3no white hoses (IOHS), 1x 15mm x 3/4" iso valve and 1x 15mm nrv (for quench applications) IK153
15mm high flow install kit; 2no Stainless Hoses(IHSS39), 1x 15mm x 3/4" iso valve and 1x 15mm nrv IK154
15mm install kit; 2no 3/8" x 3/8" hoses (IHS37), 1no 15mm x 3/8" mbsp iso and 15mm nrv IK155
15mm softener full install kit inc 2no IOHS white hoses & Rapid Fit bypass (RFBP34). IK156
22mm softener full install kit inc IHSS39 (pair of) & Rapid Fit bypass (RFBP34). IK157
HW stainless steel bypass manifold - for all HW models HHWPB
INSTALL KITS
Description Code3/8” stem x 1/4” speedfit elbow MWATEU0406
3/8” stem x 3/8” speedfit elbow MWATEU0606
1/4" speedfit elbow MWAEU0404
3/8" speedfit elbow MWAEU0606
1/4" speedfit equal tee MWATU0404043/8" speedfit equal tee MWATU060606
PUSH-FIT ADAPTORS
Full Push-Fit guide and price list available
- details on request
ESSENTIALS
ESSENTIA
LS
34 [email protected] | monarchwater.co.uk/foodservice | 01986 784759
36 37
ESSENTIALS
PROFESSIONAL WATER TREATMENT ESSENTIALS
IONEX REPLACEMENT RESIN PACKS C/W CORROGUARD MEDIA
Description CodeIONEX5/CFU5-RP IONEX5RPIONEX10/CFU10-RP IONEX10RPIONEX15/CFU15-RP IONEX15RPIONEX18/CFU18-RP IONEX18RPIONEX23/CFU23-RP IONEX23RPIONEX40-RP IONEX40RPResin funnel RCPF
IONEX CONNECTION OPTIONS
Description Code3/8" mbsp straight cons (pair) MW21319003M2
1/2" mbsp straight cons (pair) MW21319004M2
3/8" mbsp elbow cons (pair) MW21319024M2
1/2" mbsp elbows cons (pair) MW21319026M2
3/4" to 1/4" speedfit MWAFAB0409FP3/4" to 3/8" speedfit MWAFAB0609FP3 port Tee valve with SIH34 3PTV
Description Code5 litres HiEx water softener resin - in food grade plastic container with tam-per proof lid WSR5
25 litres HiEx water softener resin - - in food grade plastic container with tamper proof lid WSR25
25 litre IONEX resin/carbon mix - in food grade container with tamper proof lid MWWACR25
Corroguard - 100 bead packs - 1000 litres per bead corrosion protection SIL10100
Resin funnel RCPF
RESIN AND CORROGUARD
Description Code8 litres HiEx water softener resin - in food grade plastic container with tam-per proof lid MWM8
12 litres HiEx water softener resin - in food grade plastic container with tamper proof lid MWM12
16 litres HiEx water softener resin - in food grade plastic container with tamper proof lid MWM16
Resin funnel RCPF
MANUAL SOFTENER RESIN PACKS
Description CodeV10CrcVenda screw in cartridge - GAC V10Crc
V10CSrcVenda screw in cartridge - GAC with scalestopper media V10CSrc
ROF700 rep cart set ROF700CROF700 rep membrane set ROF700MPRORO95 rep cart set PRORO95RCPRORO95 rep membrane PRORO95MCB2510-P5 10” - 0.5μm CTO/CB ICE cartridge - 6 lpm CB2510-P5
CB2510-05 10” - 5μm CTO/CB ICE cartridge - 6 lpm CB2510-05
REPLACEMENT CARTRIDGES/MEMBRANES - OLDER SYSTEMS
Description Code3/8” to 3/8” male - pack of 10 - Converts 3/8” female thread to 3/8” male thread MWDN10
MWAH38 HEAD THREAD CONVERSION KIT
Description Code
3/8" to 6mm speedfit - pack of 10 - 3/8” male thread x 6mm speedfit (black) MWAMC0606M
3/8" to 8mm speedfit - pack of 10 - 3/8” male thread x 8mm speedfit (black) MWAMC0806M
3/8" to 10mm speedfit - pack of 10 - 3/8” male thread x 10mm speedfit (black) MWAMC1006M
3/8" to 1/4" speedfit - pack of 10 - 3/8” male thread x 1/4” speedfit (light grey) MWAMC0406
3/8" to 3/8" speedfit - pack of 10 - 3/8” male thread x 3/8” speedfit (light grey) MWAMC0606
3/8” x 3/8” male nipple - converts 3/8” female thread on head to 3/8” make thread - pack of 10
MWDN10
MWAH38 & AQA HEAD THREAD CONVERTION KITS
Description Code3/8” to 3/4” mbsp - pack of 2 - Converts 3/8” male thread to 3/4” male thread (blue) MW371114
PROFILTR HEAD THREAD CONVERTORS
ESSENTIALS
ESSENTIA
LS
36 [email protected] | monarchwater.co.uk/foodservice | 01986 784759
38 39
PROFESSIONAL WATER TREATMENT ESSENTIALS
Description CodeScaleover Descaler- Biodegradable, Strong Acid, Fast Acting, No Residue, Safe on Seals, 1 ltr bottles SOVR1
BIODEGRADABLE DESCALING LIQUID
ESSENTIALS
Description CodeTotal water hardness test kit WHTKCarbonate (temporary) hardness test kit CHTK
TEST KITS
WATER TESTING
Understanding the composition of the water on-site is vital to any foodservice operation. Having your water tested is easy and we’re here to help. Simply ask us for a Water Test Pack and return the samples to us for analysis. Once we know the make-up of your water, we can recommend the appropriate solution based on your needs.
We test for - Total Hardness, Temporary Hardness, pH Level, Iron, Silica & Chlorides.
Description CodeWMC34 - Class C water meter only - 3/4” mbsp DBOAA
WMC34M - Class C water meter c/w short interconnecting hose (SIH34) WMC34M
Digital meter - 3/8” compression x 3/8” speedfit (0.2 - 5.0 lpm range) MW0250
WATER METERS AND TIMERS
Description Code15mm compression x 15mm compression x 3/8" speedfit MW507676
15mm compression x 15mm compression x 1/4" speedfit MW507703
15mm x 15mm x 3/8" speedfit all connections MWP683
15mm x 15mm x 1/4" speedfit all connections MWP682
15mm compression x 15mm compression x 3/4" mbsp MWB50715mm compression x 3/4” mbsp c/w integral nrv MWB3915mm compression x 3/8" mbsp MWBES23640
ISOLATING VALVES / BYPASS SET
Description Code22mm full install kit inc 2no Maxflows, 3no isolating valves, 22mm nrv and 2no 22mm x 3/4” MI adaptors PSK022
28mm full install kit inc 2no Ultraflow hoses, 3no isolating valves, 28mm nrv and 2no 28mm x 1” MI adaptors PSK028
15mm full install kit inc 2no Maxflows, 2no 15mm isolating valves & 15mm nrv and 2no 15mm x 3/4” MI adaptors PSK015
SIK15C - 15mm install kit (3no Maxflow hoses/nrv/15mm valve kit/1034 post filter) SIK15C
SIK22C - 22mm install kit (3no Maxflow hoses/nrv/2no3/4" MI's/22mm valve kit/2034 post filter) SIK22C
SIK28C - 28mm install kit (3no Ultraflow hoses/nrv/2no1"MI's/28mm valve kit/2044 post filter) SIK28C
H1044 c/w SPF10 cart - 1" mbsp CISH1044SPFH2044 c/w SPF20 cart - 1" mbsp CISH2044SPF
EDC & DS ANCILLARIES
Any questions? email ussales@
monarchwater.co.uk
ESSENTIALS
ESSENTIA
LS
38 [email protected] | monarchwater.co.uk/foodservice | 01986 784759
40 41
MONARCH - EVERPURE®* COMPATIBILITY
Everpure*cartridge
no
MicronRating(uM)
Everpure*Capacity
Flow rate
(LPM)CTO
Scale Inhibitor
(Polyphos-phate)
CompatibleMonarchcartridge
no
MicronRating(uM)
MonarchCapacity
Flow rate
(LPM)CTO
ScaleInhibitor(Scale-Stop)
Fits heads
AC 0.5 2,835 1.9 Yes No MW005-10C 0.5 13,957 2 Yes No A-H INC
2CB5-S 5 11,355 3.8 Yes Yes MW005-10CS 0.5 13,957 4 Yes Yes A-H INC
OCS2 0.5 5,678 1.9 Yes Yes MW005-10CS 0.5 13,957 2 Yes Yes A-H INC
i500 0.5 11,356 1.9 Yes Yes MW005-10CS 0.5 13,957 2 Yes Yes A-H INC
4C 0.5 11,355 1.9 Yes No MW005-14C 0.5 25,882 4 Yes No A-H INC
4CB5-S 5 22,710 3.8 Yes Yes MW005-14CS 0.5 25,882 4 Yes Yes A-H INC
4H 0.5 11,355 1.9 Yes Yes MW005-14CS 0.5 25,882 4 Yes Yes A-H INC
BH2 0.5 11,355 1.9 Yes Yes MW005-14CS 0.5 25,882 4 Yes Yes A-H INC
7CB5 5 37,854 9.5 Yes No MW05-20C 5 34,068 7.6 Yes No A-H INC
NoEquivalent MW05-20CS 5 34,068 7.6 Yes Yes A-H INC
NoEquivalent MW005-20C 0.5 34,068 6.2 Yes No A-H INC
MH2 0.5 34,068 6.3 Yes Yes MW005-20CS 0.5 34,068 6.2 Yes Yes A-H INC
I2000 0.5 34,068 6.3 Yes Yes MW005-20CS 0.5 34,068 6.2 Yes Yes A-H INC
MC2 0.2 34,068 6.3 Yes No MWUF-20 Abs 0.1 29,563 6.2 Yes No A-H INC
Specials
MW-SANI-10 N/A N/A 1 No No A-H INC
MW-REMIN-20 N/A 20,888 2 No No A-H INC
CTO - denotes chlorine, bad tastes, odours, organic chemicals, herbicides and pesticides
The Monarch C, CS and UF cartridge range provide a complete package of cartridges to cater for all needs and are compatible with Everpure®/EVP* cartridges.
The table below shows the comparisons between Monarch and their equivalent Everpure®* cartridges.
MONARCH EVP COMPATIBLE FILTERS WILL FIT THE FOLLOWING HEADS
Head A - QL1Head B - QL2BHead C - QL3BHead D - MWAH38Head E - MWAH38MHead F - MWAQA1Head G - MWAQA2Head H - MWAQA3
*Everpure® is a registered trademark of Everpure Inc.
MONARCH - EVP* COMPATIBILITY CHART
PPM MMOL/L MG/L French Degrees German Degrees Grains Per Gallon Degrees Clark
1 0.0099 1 0.1 0.056 0.058 0.07
10 0.099 10 1 0.56 0.58 0.7
14.3 0.142 14.3 1.43 0.8 0.84 1
17.1 0.169 17.1 1.71 0.96 1 1.2
17.8 0.176 17.8 1.78 1 1.04 1.25
50 0.495 50 5 2.81 2.92 3.5
100 0.99 100 10 5.62 5.85 7
100.1 1 100.1 10.01 5.62 5.85 7
150 1.485 150 15 8.43 8.77 10.5
200 1.98 200 20 11.24 11.7 14
200.2 2 200.2 20.02 11.25 11.71 14
250 2.475 250 25 14.05 14.62 17.5
300 2.97 300 30 16.85 17.54 21
300.3 3 300.3 30.03 16.87 17.56 21
350 3.465 350 35 19.66 20.47 24.5
400 3.96 400 40 22.47 23.39 28
400.4 4 400.4 40.04 22.49 23.42 28
450 4.455 450 45 25.28 26.32 31.5
500 4.95 500 50 28.09 29 35
500.5 5 500.5 50.05 28.12 29.27 35
550 5.445 550 55 30.9 32.2 38.5
600 5.94 600 60 33.7 35 42
WATER HARDNESS CONVERSION TABLE
CH
AR
TS
AN
D T
AB
LE
S
40 [email protected] | monarchwater.co.uk/foodservice | 01986 784759
42 43
COMPLETE PEACE OF MIND
Monarch take pride in offering a first class after-sales service. We have strategically placed engineers that cover all hard water areas in England and Wales. With approximately 60% of the UK suffering from the effects of hard water and with an estimated 70% of all equipment failure being caused by hard water in the UK, Monarch offer its customers complete peace of mind.
OUR GUARANTEE
All Monarch PROSOFT water softeners come with a 2 year parts and 1 year labour guarantee, offering end-users complete peace of mind.
Monarch’s TRADELINE range of water softeners are covered by a 12 month parts and labour guarantee. All guarantees are given in accordance with Monarch Waters National Service Coverage Area Agreement.Full details are available on www.monarchwater.co.uk or by calling Monarch directly for a printed version.
MONARCH SERVICE
HARD WATER MAP
Official map from
TERMS AND CONDITIONS
1. Prices shown at list unless otherwise agreed and ex-works (salt incs foc delivery) and subject to VAT and remain the property of Monarch Water Ltd until paid for in full. Discounts for Trade available upon request.
2. Credit accounts available upon request. Payment terms - payment at the end of month following month of invoice. 3. All products supplied with parts and labour warranty as per Monarch Water Sales/Service Coverage Areas Agreement Effective 1st January 2019. Full details on request. 4. All other products supplied with OEM parts warranty only. 5. As a part of on-going research and development, Monarch Water Ltd reserve the right to alter design and specification without prior notice. E & O E 6. Larger units within all categories are available – details on request 7. All capacities given are in litres. 8. Monarch Water Ltd accept no responsibility for incorrectly installed items. 9. Where lead times are given ‘from date of order’, these are as quoted and are given in good faith and form no part of a contract. 10. Delivery costs available from main office on 01986 784759 - Option 3 11. All breakages in delivery are to be emailed within 48hrs of receipt of product and supported with a photograph to [email protected] 12. All products designed for cold water potable supplies only, unless otherwise stated. 13. All products suitable for cold water mains supply unless alternative maximum operating temperature rating is specified. 14. Products sold outside the Service Coverage Area Agreement to be covered strictly by a parts only exchange guarantee as determined by the model/range. 15. All parts sent back to Monarch Water Ltd are at the expense of the sending parties. 16. All items returned to Monarch Water Ltd will be repaired and returned at the expense of Monarch Water Ltd within the first year after purchase. 17. All items returned to Monarch Water Ltd for repair or replacement after the first year will incur a charge by Monarch Water Ltd to the sending party. 18. Monarch Water Ltd will endeavour to keep these charges at the lowest cost whenever possible. Please contact our office for full delivery prices on01986 784759 - Option 3(Food Service Sales)
CH
AR
TS
AN
D T
AB
LE
S
42 [email protected] | monarchwater.co.uk/foodservice | 01986 784759
Opening Hours: Monday-Friday08:30-17:0001986 [email protected] monarchwater.co.uk/foodservicelinkedin.com/company/monarch-water-limitedMonarch Water Ltd, Fair Green, Diss, Norfolk. IP22 4DG
WE’RE HERE TO HELP
Monarch Water LtdFair Green, Diss, Norfolk. IP22 [email protected]/foodservice01986 784759
WE’RE HERE TO HELP
MONARCH WATER