for cathodic protection systems, g1 series description web eng/pdf/standard rectifier.pdf ·...
TRANSCRIPT
DESCRIPTIONRectifiers for cathodic protection convert alternating current into direct current required for cathodic pro-tection system with impressed current, the conversion is performed by silicon diodes and SCR, forming arrangements full-wave jumper rectifier.
Air cooled rectifier, with operating temperatures between 23°F & 140°F.
STANDARD RECTIFIERFOR CATHODIC PROTECTION SYSTEMS, G1 SERIES
Tels. +52 [55] 2974 4867 // +52 [55] 2616 6782
[email protected] | www.dtsimexico.com
CABINET FEATURES› Manufactured under NEMA 1 for indoor use and under normal atmospheric conditions, carbon steel sheet 12-gauge.
› Document holder with operational manual.
› Perforated steel wire screens with anticorrosive coating, in order to prevent access of rodents or insects.
› Removable side panel that allows easy access to the interior.
› The front door has a lock to ensure the safety of the equipment.
› Provided with a grounding terminal to place cables of different calibers.
T E M P E R A T U R E S U P P O R T
176°F
GENERAL FEATURESDRY TRANSFORMER› The transformer is designed to be used for Cathodic Protection Systems, it has primary and secondary windings of copper or aluminum.
› Dry transformer, class F.
› 176°F temperature support.
SUPPLY VOLTAGEThe supply voltage is 127/220 VCA +- 10%,
JUMPER RECTIFIER› Silicon or selenium diodes to generate full-wave.› Range of continuous operation at ambient
temperature of 122°F.
› PRV rating of diodes of 1200 PIV.
› The diodes are protected against increased voltage with surge suppressor, made of selenium or MOVs.
DATA PLAQUEOur equipment have stainless steel plaque with the following data engraved.
1. Manufacturer name2. Input voltage and AC current3. AC Frequency4. Phases5. Output voltage and DC current6. Room temperature in °F
DC GAUGEAnalog or digital gauges (voltmeter and ammeter) ranges from 2% accuracy at full scale.
DC TERMINALDC output terminals, positive and negative on the front panel of the rectifier; the diameter of the bolts is 5/16”.
OUTPUT CAPACITYOur equipment can be manufactured in the following ranges:
› 50VCD/50ACD› 100VCD/100ACD› 100VCD/120ACD› 100VCD/150ACD
Tels. +52 [55] 2974 4867 // +52 [55] 2616 6782
[email protected] | www.dtsimexico.com
STANDARD RECTIFIERFOR CATHODIC PROTECTION SYSTEMS, G1 SERIES