8/12/2019 FT1300

1/4

Electric Fire Pump Controllers

Fire Pump Controllers forBusiness Critical Continuity

8/12/2019 FT1300

2/4

Combined automatic and manual fire pumpcontrollers for starting electric motor driven firepumps.Firetrolcombined automatic and manual firepump controllers are intended for starting elec-tric motor driven fire pumps and are available

in the following configurations:FTA1000 Full Voltage StartingFTA1250 Part Winding Reduced Current

Starting (Closed Circuit Transition)FTA1300 Wye-Delta Reduced Voltage Start-

ing (Open Circuit Transition)FTA1350 Wye-Delta Reduced Voltage Start-

ing (Closed Circuit Transition)FTA1500 Primary Resistance Reduced Volt-

age Starting (Closed Circuit Transi-tion)

FTA1800 Autotransformer Reduced VoltageStarting (Closed Circuit Transition)

FTA1930 Digital Solid State Reduced VoltageStarting (Closed Circuit Transition)

These Controllers are available assembledwith power transfer switches for use with anemergency generator set or second powersource.

Operator InterfaceThe fire pump controllers feature an opera-tor interface with user keypad. The interfacemonitors and displays motor operating condi-tions, including all alarms, events, and pressureconditions. All alarms, events, and pressureconditions are displayed with a time and datestamp. The display is a 128x64 Backlit LED ca-pable of customized graphics and cryllic typecharacter display. The display and interface areNEMA rated for Type 2, 3R, 4, 4X, and 12 pro-tection and is fully accessible without openingthe controller door. The user interface utilizesmultiple levels of password protection for sys-tem security. A minimum of 3 password levelsare provided.

Side-by-side disconnect/circuit breaker provides

single handle sequencing

8/12/2019 FT1300

3/4

Voltage surge protector Main Disconnect Switch sized for connected motor

horsepower and voltage Fire pump Circuit Breaker Single handle Isolating Disconnect Switch/Circuit

Breaker mechanism Motor contactor Emergency Manual Run Mechanism to mechanically

close motor contactor contacts in an emergency condi-tion

Built-in Start and Stop push-buttons to bypass auto-matic start circuits

Minimum Run Timer / Off Delay Timer Daylight Savings Time Option Weekly Test Timer Elapsed Time Meter Door mounted display/interface panel featuring a 128 x

64 pixel backlit LED Graphical Display, Membrane TypeUser Control Push-buttons and easy to read LED Indica-tors for:

POWER AVAILABLE ALARM TRANSFER SWITCH NORMAL (If unit ordered with

Automatic Power Transfer Switch) TRANSFER SWITCH EMERGENCY (If unit ordered with

Automatic Power Transfer Switch) SYSTEM PRESSURE LOW

PUMP RUNNING DELUGE OPEN

REMOTE START INTERLOCK ON FAIL TO START MOTOR OVERLOAD EMERGENCY ISO SWITCH OFF (If unit ordered with

Automatic Power Transfer Switch) PHASE FAILURE PHASE REVERSAL AUTOMATIC SHUTDOWN DISABLED OVERVOLTAGE UNDERVOLTAGE Digital Pressure Display USB Host Controller and Port Solid State Pressure Transducer Data Log Event Log (3000 Events) True RMS Metering with simultaneous 3 Phase Display of

Amps, Volts, Frequency, Pressure and Alarm Messages Disk Error message Disk Near Full message Pressure Error message Motor Over 320% message Local Start message Remote Start message Emergency Start message Fail To Start message Undervoltage message Overvoltage message NEMA Type 2 enclosure Suitable for use as Service Equipment Each standard controller comes with user configurable

options for: Interlock Alarm Low Pressure Audible Low Suction Pump Run User Defined Input Weekly Test

Standard features include:ApprovalsFiretrol fire pump controllers are listed by Un-derwriters Laboratories, Inc., in accordancewith UL218, Standard for Fire Pump Controllers,CSA, Standard for Industrial Control Equipment,and approved by Factory Mutual. They arebuilt to meet or exceed the requirements ofthe approving authorities as well as NEMA and

the latest editions of NFPA 20, Installation ofCentrifugal Fire Pumps, and NFPA 70, NationalElectrical Code.

Digital Status/Alarm MessagesThe digital display indicates text messages forthe stats and alarm conditions of: Motor On Sequential Start Time Minimum Run Time Local Start

/ Off Delay Time Remote Start Fail to Start System Battery Low Under Voltage Over Voltage Locked Rotor Trip Over Frequency Emergency Start Motor Over 320%

Drive Not Installed Motor Overload Disk Error Printer Error Disk Near Full Pressure Error

The Sequential Start Timer and Minimum RunTimer/Off Delay Times are displayed as numericvalues reflecting the value of the remainingtime.

8/12/2019 FT1300

4/4

Emerson Network Power.

The global leader in enabling Business-Critical Continuity. EmersonNetworkPower.com

AC Power

Connectivity

DC Power

Embedded Computing

Embedded Power

Monitoring

Outside Plant

Power Switching & Controls

Precision Cooling

Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. 2010 Emerson Electric Co.

Racks & Integrated Cabinets

Services

Surge Protection

iretrol Brand Products CaryNorth Carolina 21SA Phone 10 200a10 20 www.firetrol.com

LED Visual Indicators

LED indicators, visible with the door closed,indicate:

Power Available Alarm Pump Running System Pressure Low Remote Start Transfer Switch Normal Deluge Open Transfer Switch Emergency Phase Failure Phase Reversal Interlock On Fail To Start Motor Overload Emerg. Iso. Switch Off Automatic Shutdown Disabled Overvoltage Undervoltage

Data Logging

The user interface monitors the systemand logs the following data:Motor Calls/Starts Pump Total Run TimePump Last Run Time Total Controller PwrOn TimeLast Pump Start Min/Max System PressureLast Phase Fail/Reversal Last Locked Rotor TripLast Locked Rotor Current Min/Max FrequencyMax Starting Currents Max Run CurrentsMin/Max Voltage per Phase while idle (notrunning) Min Voltage per Phase during Start Min/Max Voltage per Phase during Run

Event Recording Memory - The controller records all opera-tional and alarm events to system memory. All

events are time and date stamped and includean index number. The system memory has thecapability of storing 3000 events and allowsthe user access to the event log via the user in-terface. The user can scroll through the storedmessages in groups of 1 or 10.

USB Host Controller The controller is equipped with a built-in USBHost Controller. A USB port capable of accept-ing a USB Flash Memory Disk is provided. The

controller saves all operational and alarm eventsto theflash memory on a daily basis. Each savedevent is time and date stamped. The totalamount of historical data saved depends onthe size of the flash disk utilized. The operatorcan save settings and values to theflash disk ondemand via the user interface.

CB1000-50

USB Host Portand Flash Disk