fume hoods · 2020. 12. 7. · 51810 style same as 51810, with additional remote air fixture and...

1ADVANTAGE-SCIENTIFIC.COM12/20

FUME HOODS

HIGH SIGHT LINE GEN IIVERTICAL SASH

2

HIGH SIGHT LINE GEN IICOMBINATION SASH

4

MULTI-UNIT GEN IIVAV - VARIABLE AIR VOLUME

6

DEMONSTRATION GEN IIFRONT/REAR SASH

8

ADA GEN IIVERTICAL SASH

12

STAND-ALONE OR MULTI-UNIT GEN II3-SIDE VIEW WORKSTATION

10

ADA GEN IICOMBINATION SASH

14

BASIC GEN IIBY-PASS

16

PORTABLE GEN II 18

ACCESSORIES 21

FACTORY-INSTALLED ACCESSORIES 22

BASE CABINETS 19

MOBILE CABINETS 20

©2020 STEVENS INDUSTRIES, INC.ALL RIGHTS RESERVED. Due to continuing product development, Stevens reserves the right to change specifications without notice.

2 1 .217.857.710012/20

High Sight Line GEN IIVertical Sash

FUME HOODS

GEN Design is high performance hood as an individual hood for constant volume extraction blower (not included). Hood incorporates both by-pass and airfoil features.

The GEN II design has contour form vertical side posts and slope back header with radius lower horizontal edge. Design promotes smooth airflow into hood opening. Hood fascia has 36" high clear sight view. Full opening 29" sash ideal for unrestricted equipment setup access. Advantage Scientific hood includes standard 18" vertical sash stops to promote efficient working extraction and face velocity.

3 models available: 51805485632: 48"W x 56"H x 32 1/4"D 51805605632: 60"W x 56"H x 32 1/4"D 51805725632: 72"W x 56"H x 32 1/4"D

CONSTRUCTION FEATURES• Solid galvanized frame construction allows

disassembly for constricted installation access areas• Powder coat exterior finishes• Shaft drive sash• Polyresin liner• LED light fixture• Stainless steel full width finger lift sash• 18" open sash stop• 10" exhaust duct collar

STANDARD EQUIPMENT (factory installed)• 2 GFI duplex• Blower switch• Light switch• Cup sink• Remote cold water faucet• Remote gas fixture• Black epoxy 1/4" dish top

FACTORY-INSTALLED ADDS• 52005 Airflow monitor• 52006 Digital airflow monitor• 52007 External vacuum breaker

OPTION ACCESSORIES• 52001 Ceiling enclosure• 52004 Lattice assembly

51805 STYLE

Same as 51805, with additional remote air fixture and remote vacuum fixture.


51806 STYLE

MUST BE ORDERED WITH FUME HOOD. NOT SOLD SEPARATELY.52005 Factory-Installed Airflow Monitor (details on page 22)52006 Factory-Installed Digital Airflow Monitor (details on page 22)52007 Factory-Installed External Vacuum Breaker (as required by specific local, city or state codes)

FACTORY-INSTALLED ADDS

OF EXHAUST DUCT

CL

33.75"

10"

20"

36"29"MaxSash

Height

57.25"

24.50"

1.25"30"

48"

10" Dia.SS Duct Collar


High Sight Line GEN IIVertical Sash

FUME HOODS

51805605632 / 51806605632

51805485632 / 51806485632

51805725632 / 51806725632

W H DSuperstructure: 48 56 321⁄4Worktop: 48 11⁄4 30Hood Opening: 38 29Hood View: 38 36

Exhaust Parameters: 739 CFM .26 SPHood Weight: 200 pounds (approx.)





BASE CABINETS(SEE OFFERING BELOW)

48" BASE CABINET ORTWO 24" BASE CABINETS

(ANY COMBINATION)

519005191051920

519005191051920

24W 24W

5190341489

48W


(ANY COMBINATION)

519015191151921

519015191151921

30W 30W

41489

60W

TWO 36" BASE CABINETS 0RTHREE 24" BASE CABINETS

(ANY COMBINATION)

519005191051920

24W

519005191051920

24W

519005191051920

24W36W

519025191251922

36W

519025191251922

BASE CABINET OFFERING (DETAILS ON PAGES 19-20)

36W

51902 51912 51922

30W

51901 51911 5192151900 51910

24W

51920

48W

51903 41489 41489

60W

OF EXHAUST DUCT

CL

JUNCTIONBOX

OF EXHAUST DUCT

CL

JUNCTIONBOX

OF EXHAUST DUCT

CL

JUNCTIONBOX

4 1 .217.857.710012/20

High Sight Line GEN IICombination SashFUME HOODS

GEN Combination sash with sliding door panels in vertical sash frame. Combination sash allows vertical sash to be down while sliding door panel may be opened for access, reducing open exposure to hood interior as added safety feature. Design is high performance hood as an individual hood for constant volume extraction blower (not included). Hood incorporates both by-pass and airfoil features.




disassembly for constricted installation access areas• Powder coat exterior finishes• Shaft drive sash• Polyresin liner• LED light fixture• Stainless steel full width finger lift sash• Vertical sash with horizontal sliding panes• 18" open sash stop• 10" exhaust duct collar




51810 STYLE

Same as 51810, with additional remote air fixture and remote vacuum fixture.3 models available: 51811485632: 48"W x 56"H x 32 1/4"D 51811605632: 60"W x 56"H x 32 1/4"D 51811725632: 72"W x 56"H x 32 1/4"D

51811 STYLE



OF EXHAUST DUCT

CL

33.75"

10"

20"

36"29"MaxSash

Height

57.25"

24.50"

1.25"30"

48"



High Sight Line GEN IICombination SashFUME HOODS

51810485632 / 51811485632

51810605632 / 51811605632

51810725632 / 51811725632









(ANY COMBINATION)

519005191051920

519005191051920

24W 24W

5190341489

48W


(ANY COMBINATION)

519015191151921

519015191151921

30W 30W

41489

60W


(ANY COMBINATION)

519005191051920

24W

519005191051920

24W

519005191051920

24W36W

519025191251922

36W

519025191251922

OF EXHAUST DUCT

CL

JUNCTIONBOX

OF EXHAUST DUCT

CL

JUNCTIONBOX

OF EXHAUST DUCT

CL

JUNCTIONBOX


36W

51902 51912 51922

30W

51901 51911 5192151900 51910

24W

51920

48W

51903 41489 41489

60W

6 1 .217.857.710012/20

Multi-Unit GEN IIVAV - Variable Air Volume

FUME HOODS

GEN Variable air volume (VAV) restrictive by-pass hood. High performance hood designed for lab with multiple installed hoods and central extraction blower. Airflow balancing and blower by HVAC mechanical contractor. Hood incorporates flush mount airfoil.




disassembly for constricted installation access areas• Powder coat exterior finishes• Shaft drive sash• Polyresin liner• LED light fixture• Stainless steel full width finger lift sash• 18" open sash stop• 10" exhaust duct collar




51815 STYLE


51816 STYLE



OF EXHAUST DUCT

CL

33.75"

10"

20"

36"29"MaxSash

Height

57.25"

24.50"

1.25"30"

48"



Multi-Unit GEN IIVAV - Variable Air Volume

FUME HOODS

51815485632 / 51816485632

51815605632 / 51816605632

51815725632 / 51816725632

Designed for multiple unit installations with common blower extraction system.











(ANY COMBINATION)

519005191051920

519005191051920

24W 24W

5190341489

48W


(ANY COMBINATION)

519015191151921

519015191151921

30W 30W

41489

60W


(ANY COMBINATION)

519005191051920

24W

519005191051920

24W

519005191051920

24W36W

519025191251922

36W

519025191251922

OF EXHAUST DUCT

CL

JUNCTIONBOX

OF EXHAUST DUCT

CL

JUNCTIONBOX

OF EXHAUST DUCT

CL

JUNCTIONBOX


36W

51902 51912 51922

30W

51901 51911 5192151900 51910

24W

51920

48W

51903 41489 41489

60W

8 1 .217.857.710012/20

GEN


disassembly for constricted installation access areas• Powder coat exterior finishes• Shaft drive sashes with interlocks• Polyresin liner• LED light fixture• Stainless steel full width finger lift sashes, front

and back• Security sash locks• 18" open sash stop• 10" exhaust duct collar




51820 STYLEDemonstration hood has front and rear access vertical sashes. Ideal for rear see-thru demonstration viewing. Sashes have interlock, preventing simultaneous opening of both sashes. Ideal for stand-alone use where both viewing and experiment participation is desired. Unit also ideal for in-wall installation: student from classroom side and instructor operation from a more secure prep room area. GEN II hood includes additional rear sash lock to secure access into storage prep areas. Hood incorporates both by-pass and airfoil features.



Demonstration GEN IIFront/Rear Sash

FUME HOODS


51821 STYLE



SashExtendsAbove

12"

36.50"

29"MaxSash

Opening

20"

36"

57.25"

3.875" 3.875"

17.75"

29"

RemovableAccessPanels

SashInterlock

10" Dia.SS Duct

18.25"


Demonstration GEN IIFront/Rear Sash

FUME HOODS

51820485632 / 51821485632

51820605632 / 51821605632

51820725632 / 51821725632









(ANY COMBINATION)

519005191051920

519005191051920

24W 24W

5190341489

48W


(ANY COMBINATION)

519015191151921

519015191151921

30W 30W

41489

60W


(ANY COMBINATION)

519005191051920

24W

519005191051920

24W

519005191051920

24W36W

519025191251922

36W

519025191251922

OF EXHAUST DUCT

CL

JUNCTIONBOX

OF EXHAUST DUCT

CL

JUNCTIONBOX

OF EXHAUST DUCT

CL

JUNCTIONBOX


36W

51902 51912 51922

30W

51901 51911 5192151900 51910

24W

51920

48W

51903 41489 41489

60W

10 1 .217.857.710012/20

GEN


disassembly for constricted installation access areas• Full view safety glass back• Powder coat exterior finishes• Shaft drive sash• LED light fixture• Stainless steel full width finger lift sash• 18" open sash stop• 10" exhaust duct collar




51825 STYLEStudent workstation hood is designed for front face vertical sash operation and 3-side viewing (both ends and back). A high performance hood, ideal as stand-alone application. Workstation hoods can be placed back-to-back (double face) and also end-to-end, forming island or peninsula arrangements. Great multi-use in a high participation laboratory setting.

The GEN II design allows use as a single- or multi-unit exhaust blower setup. Hood fascia has 42" high clear sight view. Blower and airflow balancing required by HVAC contractor.


Student Workstation GEN IIStand-Alone or Multi-Unit

FUME HOODS

FIXED REAR VIEW WINDOW

3-SidedViewing,

Each Unit

BACK-TO-BACK ISLAND OR PENINSULASTAND-ALONE

4-SidedViewing

THRU-WALL

Instructor/Prep Room

Side

ClassroomSide

Wall

3-SidedViewing

BackWall

AGAINST WALL


51826 STYLE




Student Workstation GEN IIStand-Alone or Multi-Unit

FUME HOODS

W H DSuperstructure: 48 60 323⁄8Worktop: 48 11⁄4 29Hood Opening: 453⁄8 29

Exhaust Parameters: 770 CFM .24 SPShipping Weight: 400 pounds (approx.)(hood only)





51825486032 / 51826486032

51825606032 / 51826606032

51825726032 / 51826726032



(ANY COMBINATION)

519005191051920

519005191051920

24W 24W

5190341489

48W


(ANY COMBINATION)

519015191151921

519015191151921

30W 30W

41489

60W


(ANY COMBINATION)

519005191051920

24W

519005191051920

24W

519005191051920

24W36W

519025191251922

36W

519025191251922

OF 10" DIA.EXHAUST DUCT

CL


CL


CL


36W

51902 51912 51922

30W

51901 51911 5192151900 51910

24W

51920

48W

51903 41489 41489

60W

12 1 .217.857.710012/20

GEN


disassembly for constricted installation access areas• Powder coat exterior finishes• Shaft drive sash• Polyresin liner• LED light fixture• Stainless steel full width finger lift sash• 10" exhaust duct collar• Secondary containment trough




51830 STYLEADA (Americans with Disabilities Act) high performance hood for constant volume extraction blower (not included). Hood incorporates both by-pass and airfoil with retainer spill trough to protect wheelchair users. Cup sink and remote lever control fixtures are positioned forward and lower within ADA specifications.



ADA GEN IIVertical Sash

FUME HOODS


51831 STYLE



OF EXHAUST DUCT

CL

33.75"

10"

20"

36"29"MaxSash

Height

57.25"

24.50"

1.25"30"

48"



ADA GEN IIVertical Sash

FUME HOODS

51830485632 / 51831485632

51830605632 / 51831605632

51830725632 / 51831725632







BASE CABINETS(SEE PAGE 19 FOR DETAILS)

51931

51932

OF EXHAUST DUCT

CL

JUNCTIONBOX

OF EXHAUST DUCT

CL

JUNCTIONBOX

OF EXHAUST DUCT

CL

JUNCTIONBOX

51930

14 1 .217.857.710012/20

GEN


disassembly for constricted installation access areas• Powder coat exterior finishes• Shaft drive sash• Polyresin liner• LED light fixture• Stainless steel full width finger lift sash• Vertical sash with horizontal sliding panes• 10" exhaust duct collar• Secondary containment trough




51835 STYLEADA (Americans with Disabilities Act) high performance hood for constant volume extraction blower (not included). Hood incorporates both by-pass and airfoil with retainer spill trough to protect wheelchair users. Cup sink and remote lever control fixtures are positioned forward and lower within ADA specifications. Combination sash with sliding door panels in vertical frame sash. Combination sash allows vertical sash to be down while sliding door panel may be opened for access, reducing open exposure to hood interior as added safety feature.



ADA GEN IICombination SashFUME HOODS


51836 STYLE



OF EXHAUST DUCT

CL

33.75"

10"

20"

36"29"MaxSash

Height

57.25"

24.50"

1.25"30"

48"



ADA GEN IICombination SashFUME HOODS

51835485632 / 51836485632

51835605632 / 51836605632

51835725632 / 51836725632







BASE CABINETS(SEE PAGE 19 FOR DETAILS)

OF EXHAUST DUCT

CL

JUNCTIONBOX

OF EXHAUST DUCT

CL

JUNCTIONBOX

OF EXHAUST DUCT

CL

JUNCTIONBOX

51931

51932

51930

16 1 .217.857.710012/20

GEN

CONSTRUCTION FEATURES• Galvanized frame construction• Powder coat exterior finishes• Polyresin liner• LED light fixture• Full width finger lift sash• 10" exhaust duct collar

STANDARD EQUIPMENT (factory installed)• 2 GFI duplex• Blower switch• Light switch• Cup sink• Remote cold water gooseneck faucet• Remote gas fixture• Black epoxy 1/4" dish top


OPTION ACCESSORY• 52001 Ceiling enclosure

51800 STYLEBy-pass fume hood. Value and performance in a solid design mounted on a flat epoxy top. Unit has a 29" high opening sash and is equipped with convenient remote operated fixtures.

2 models available: 51800485630: 48"W x 56"H x 29 1/2"D 51800605630: 60"W x 56"H x 29 1/2"D

Basic GEN IIBy-Pass

FUME HOODS



SashExtendsAbove

5"

GasketedAccessPanels

SingleWeight

Counter-Balance

29"MaxSash

Opening

25"

48"

31"

0.5"

1.25" 9"

30"

56"

10" Dia.SS Duct

2-Tube Vapor SealedLED Light

10"

29.50"


Basic GEN IIBy-Pass

FUME HOODS

W H DSuperstructure: 48 56 291⁄ 2Worktop: 48 11⁄4 30Hood Opening: 43 29Hood View: 43 36


W H DSuperstructure: 60 56 291⁄ 2Worktop: 60 11⁄4 30Hood Opening: 55 29Hood View: 55 36


51800485630

51800605630

OF EXHAUST DUCT

CL

JUNCTIONBOX

OF EXHAUST DUCT

CL

JUNCTIONBOX



(ANY COMBINATION)

519005191051920

519005191051920

24W 24W

5190341489

48W


(ANY COMBINATION)

519015191151921

519015191151921

30W 30W

41489

60W


30W

51901 51911 5192151900 51910

24W

51920

41489

60W48W

51903 41489

18 1.217.857.710012/20

GEN

STANDARD EQUIPMENT (factory installed)• Interactive programmable alarm

system (reminder for saturation testing)

• Pressurized detection chamber (manually detect fi lter saturation)

• Internal fl uorescent light (tubular 18W, 500 Lux IP68)

• Painted steel construction• 6 ft. power cord

OPTION ACCESSORY• 52008 Particulate (HEPA) fi lter

52050 STYLEThe GEN II ductless portable fume hood – complete with mobile cart base – is for chemical and powder applications. Designed for applications where a fume hood is imperative, and versatility is a necessity. The fan/fi lter housing and control panel sit atop a fully welded tube chamber with plexiglass windows for viewing from all four sides. The front has a fold up door to allow for easy loading and unloading of apparatus and experiments.

One fi lter will handle the majority of chemicals, but the stackable fi lter system allows for multiple fi ltration confi gurations.

Available fi lters:• AS For solvents• BE+ For solvents and acids• F For formaldehydes• K For ammonia• H14 For powders

1 model available: 52050347728: 33 1/2"W x 76 1/2"H x 28"D

Portable HoodFUME HOODS

Duct

less

Por

tabl

e Fu

me

Hood

POWER ON/OFF SWITCH LOCATED ON SIDE OF UNIT

FLAT EPOXY RESIN

COUNTERTOP

CASTERSw/BRAKES

HINGED 1/4” CLEAR PLEXIGLASS PANEL

FRONT CONTROL PAD FOR FAN

AND LIGHT

24”

76 1/2”

71 1/4”

31 1/2”

33 1/2”

30” 36”

DOOR STAYS OPEN AT 150°

METAL ENCLOSURE AROUND FAN AND FILTER HOUSING

6 FTPOWERCORD

1/4” CLEAR PLEXIGLASS PANELS AT SIDES AND REAR

TUBING BASE FRAME

FAN

FILTER

LIGHT

19 1/8”

16 1/2”

25 1/2”

9 1/2”

1”1”

24”

24”

28”

8”

specifications

FRONT VIEW END VIEW

END USER QUESTIONNAIRE INFORMATION REQUIRED TO PROVIDE CORRECT FILTER MEDIA.

52008 Particulate (HEPA) Filter

OPTION ACCESSORY


Base CabinetsFUME HOODS

51900

41489

51901

51902

51903

W : 24 H : 35 D : 24

• Powder Coated Steel Construction

• Right Hinge Door with Full Access Opening

• Open Back• Adjustable Shelf

W : 48, 60 H : 35 D : 24, 29

• Laminated Wood Construction

• False Front• Doors• Removable Back

W : 30 H : 35 D : 24


• Double Doors with Full Access Opening


W : 36 H : 35 D : 24




W : 48 H : 35 D : 24




STANDING HEIGHTBASE CABINET





Actual: 24"W x 34 3/4"H x 22 3/8"D

Actual: 30"W x 34 3/4"H x 22 3/8"D

Actual: 36"W x 34 3/4"H x 22 3/8"D

Actual: 48"W x 34 3/4"H x 22 3/8"D

51932

51931

51930

W : 72 H : 32 D : 24


• Left and Right Hand Chases

• Open Design Allows Wheelchair Access

W : 60 H : 32 D : 24


• Left and Right Hand Chases

• Open Design Allows Wheelchair Access

W : 48 H : 32 D : 24


• Right Hand Chase• Open Design Allows

Wheelchair Access

ADA HEIGHTBASE CABINET



Actual: 48"W x 28 3/4"H x 22 3/8"D

Actual: 60"W x 28 3/4"H x 22 3/8"D

Actual: 72"W x 28 3/4"H x 22 3/8"D

20 1.217.857.710012/20

Base/Mobile CabinetsFUME HOODS

51910 51920

51911 51921

51912 51922

W : 24 H : 35 D : 18

• Vented Right Hinge Door• Reinforced Steel with Hi-

Tech Performance Polymer Alloy Coating Which Provides 100% Coverage Against Corrosion

• 3-Point Locking System• Vent Kit Provided

W : 24 H : 35 D : 18

• Right Hinge Door• 3-Point Locking System• Certifi ed to Meet NFPA 45

W : 30 H : 35 D : 18

• Vented Double Doors• Reinforced Steel with Hi-



W : 30 H : 35 D : 18

• Double Doors• 3-Point Locking System• Certifi ed to Meet NFPA 45

W : 36 H : 35 D : 18

• Vented Double Doors• Reinforced Steel with Hi-



W : 36 H : 35 D : 18

• Double Doors• 3-Point Locking System• Certifi ed to Meet NFPA 45

STANDING HEIGHTCORROSIVES BASE CABINET



STANDING HEIGHTFLAMMABLES BASE CABINET



Actual: 24"W x 34 3/4"H x 18 3/8"D Actual: 24"W x 34 3/4"H x 18 3/8"D



51940 W : 36 H : 29 D : 18

• 3-Point Locking System• 3" Casters

FLAMMABLESMOBILE CABINET

Actual: 36"W x 28 3/4"H x 18 3/8"D


52001 SERIESCEILING ENCLOSURES

52004 SERIESLATTICE ASSEMBLIES

The 52001 Series Ceiling Enclosures provide a professional, finished design in any setting. Ceiling enclosures are fabricated of cold rolled steel and finished to match the fume hood superstructure. Ceiling enclosures extend from top of hood to ceiling height or soffit.

To specify, provide model number and size of hood, plus floor-to-ceiling or floor-to-soffit dimension.

The 52004 Series Lattice Assemblies consist of 1/2" diameter aluminum apparatus rods with side mounting plates and cross clamps.

Lattice assembly may be added to hood in field when not ordered with hood.

To specify, provide model number and size of hood.

AccessoriesFUME HOODS

STEP #1: ATTACH ENCL ANGLES TO WALL ANDATTACH END ENCLOSURES TO TOP OF FUME HOOD

STEP #2: TILT BACK TOP OF FRONT ENCL TOWARD ENDENCL AND INSERT TOP CLIP (DETAIL A) INTO TOP SLOT(DETAIL C) ON END ENCL. PUSH BOTTOM OF FRONTENCL IN SO BOTTOM CLIP (DETAIL B) OF THE FRONTENCL FITS INTO BOTTOM SLOT (DETAIL D) ON END ENCLAND PUSH DOWN.

DETAIL C

DETAIL D

DETAIL A

DETAIL B

HEIGHT REQ’DBY SPEC

WIDTH OFFUME HOOD

33.750

CEILINGENCLOSURES

LATTICEASSEMBLIES

CEILING ENCLOSUREASSEMBLY DETAIL

22 1 .217.857.710012/20

Air Master Systems Corp. • 231.798.1111 • airmastersystems.com

33

Air Monitor AlarmsAFA 500 MK3 FUME HOOD AIRFLOW MONITOR

AFA 1000/1 MK3 FUME HOOD AIRFLOW MONITOR

Alarm Range 30-400 fpm (.15 - 2.0 m/s)

Accuracy Face velocity accuracy +/- 10%

Airflow Sensor On-board or remote sensor

Calibration Single or 2-point (Installer Selectable)

Low Air Alarm Delay Fixed 5 seconds

Relay Output 1 --( Low Air Alarm)

Analog Output Not Available

Relay Input 2 - Night setback andsash high

Comm. Port RS232 - Can be connected via serial interface to LAN network (Full hood performance software reporting available)

Sash Heigh Indication Yes - using a micro switch or Proximity switch input. With repeat alarm feature factory set to 5 minutes. (Can be adjusted via laptop up to 30 min.)

Night Setback Yes - using a relay input

External Alarm Indication Not available

Power Requirement Input - 120VAC, 60Hz / Output - 15VDC, 500ma

Display - Visual LED: red, alarm; green, normal

Alarm Indication Red LED and audible alarm

Horn Silence Yes - temporary

Mounting Semi Flush

Operating Temperature 55-86 F (13-30 C)

Storage Temperature -40-150 F (-40-65 C)

Instrument Dimensions Instrument Case: 5.2” H x 3.19” W x 1.97” D (132mm H x 81mm W x 50mm D)

Agency Listings UL and CE

Display Range 0-999 fpm (0 - 5.0 m/s)

Alarm Range 0-999 fpm (0 - 5.0 m/s)

Field Set-Up 2-point velocity calibration ( with on-screen instructions )

Accuracy Sensor / Display Resolution 1 fpm / Face Velocity Accuracy +/-10%

Alarm Delays User Configurable - 0 to 60 seconds

Relay Output 4 ( 1 on board - 3 on optinal plug in relay interface unit )

Analog Output 0-10V Output, Directly proportional to velocity (Optional)

Relay Input 3

Comm. Port RS232 - Can be connected via Serial Interface to LAN network ( Full Software Available)

Sash High Indication Yes, with separate plug-in connection

Night Setback Yes

External Alarm Indication Yes

Power Requirement Input-120VAC, 60Hz

Units Output-15VDC, 500ma

Display-Visual English and Metric (user selectable)

Alarm Indication Analog bar graph or Fault Timeline / LEDs: red, alarm; yellow, caution; green, normal / Digital display of velocity reading (can be turned off)

Horn Silence Yes (temporary / permanent / automatic depending on type of alarm or external input)

Mounting Semi Flush

Operating Temperature 55-86 F ( 13-30 C )

Storage Temperature -40-150 F (-40-65 C )

Instrument Dimensions Instrument Case: 5.2” H x 3.19” W x 1.14” D ( 132mm H x 81mm W x 29mm D )


Air Master Systems Corp. • 231.798.1111 • airmastersystems.com

33

Air Monitor AlarmsAFA 500 MK3 FUME HOOD AIRFLOW MONITOR

AFA 1000/1 MK3 FUME HOOD AIRFLOW MONITOR

Alarm Range 30-400 fpm (.15 - 2.0 m/s)

Accuracy Face velocity accuracy +/- 10%

Airflow Sensor On-board or remote sensor

Calibration Single or 2-point (Installer Selectable)

Low Air Alarm Delay Fixed 5 seconds

Relay Output 1 --( Low Air Alarm)

Analog Output Not Available

Relay Input 2 - Night setback andsash high

Comm. Port RS232 - Can be connected via serial interface to LAN network (Full hood performance software reporting available)

Sash Heigh Indication Yes - using a micro switch or Proximity switch input. With repeat alarm feature factory set to 5 minutes. (Can be adjusted via laptop up to 30 min.)

Night Setback Yes - using a relay input

External Alarm Indication Not available

Power Requirement Input - 120VAC, 60Hz / Output - 15VDC, 500ma

Display - Visual LED: red, alarm; green, normal

Alarm Indication Red LED and audible alarm

Horn Silence Yes - temporary

Mounting Semi Flush

Operating Temperature 55-86 F (13-30 C)

Storage Temperature -40-150 F (-40-65 C)

Instrument Dimensions Instrument Case: 5.2” H x 3.19” W x 1.97” D (132mm H x 81mm W x 50mm D)


Display Range 0-999 fpm (0 - 5.0 m/s)

Alarm Range 0-999 fpm (0 - 5.0 m/s)

Field Set-Up 2-point velocity calibration ( with on-screen instructions )

Accuracy Sensor / Display Resolution 1 fpm / Face Velocity Accuracy +/-10%

Alarm Delays User Configurable - 0 to 60 seconds

Relay Output 4 ( 1 on board - 3 on optinal plug in relay interface unit )

Analog Output 0-10V Output, Directly proportional to velocity (Optional)

Relay Input 3

Comm. Port RS232 - Can be connected via Serial Interface to LAN network ( Full Software Available)

Sash High Indication Yes, with separate plug-in connection

Night Setback Yes

External Alarm Indication Yes

Power Requirement Input-120VAC, 60Hz

Units Output-15VDC, 500ma

Display-Visual English and Metric (user selectable)

Alarm Indication Analog bar graph or Fault Timeline / LEDs: red, alarm; yellow, caution; green, normal / Digital display of velocity reading (can be turned off)

Horn Silence Yes (temporary / permanent / automatic depending on type of alarm or external input)

Mounting Semi Flush

Operating Temperature 55-86 F ( 13-30 C )

Storage Temperature -40-150 F (-40-65 C )

Instrument Dimensions Instrument Case: 5.2” H x 3.19” W x 1.14” D ( 132mm H x 81mm W x 29mm D )


Factory-InstalledAccessories

FUME HOODS

52005 AIRFLOW MONITOR

52006 DIGITAL AIRFLOW MONITOR

AIRFLOW MONITORS ARE HIGHLY RECOMMENDED FOR USE AND MUST BE ORDERED FACTORY-INSTALLED.

NOT SOLD SEPARATELY.

fume hoods · 2020. 12. 7. · 51810 style same as 51810, with additional remote air fixture and...

Documents