gauges - · pdf filetaper gauge gauges gauges root limit gauge application • use for...
TRANSCRIPT
259
Gauge
Gauge
AirGauge
FeelerGauges
TaperGauge
Gauges
GaugesPin&
Ring Gauge
Thread Plug &Thread Ring
Gauge
Welding Gauges
Item No.
WG-1 (M)WG-2 (L)
Throat Thickness of FilletWeld Measurement Accuracy
±0.4mm±0.2mm
Accuracy Angle
±0.7°±0.7°
Accuracy (mm)
±0.4mm±0.4mm
Weight
79g91g
APPLICATION• For measuring weld f illet weld, bead weld etc.
MATERIAL• Stainless steel (SUS410)
FEATURES• Ef f iciency for welding and quality control• Tough and portable (with plastic bag)
WG-1
Front
Front
Back
Back
WG-2
Blade
7014 41
Rotator
Body
67
Body
Rotator
70.5
56.8
46.8
WG-1
DIMENSION
MiscellaneousMeasuring
PracticalMeasuring
UndercutMeasuring(WG-2 Only)
AngleScale
Beveling Angle
(10mm)
Opening Diameter(WG-1 : Under 3.5mm)(WG-2 : Under 5.0mm)
Welding Bar DiameterWelding Stick Diameter(WG-1 : Under 10mm)(WG-2 : Under 20mm)
Step Difference• Plate Thickness(Under 20mm)
General Angle
Length(Under 40mm)
Root Opening Thickness Root Face
MeasuringBead Weld
Fillet Weld (Width, Height) Bead Weld (Height) Fillet Weld(Throat Thickness)
CAPABILITIES
WG-2
SPECIFICATIONS
www.sumipo
l.com
260
Gauge
AirGauge
FeelerGauges
TaperGauge
Gauges
Gauges
Pin&Ring G
auge
Thread Plug &Thread Ring
Gauge
Tel. 0-2762-3000 www.sumipol.com
FEATURES• Use for measuring during the welding processes• Very convenient to the welding processes with steel frame assembly such as general welding, ship building, and bridge construction, etc.• Easy reading scale
Welding Gauges
APPLICATION• For wide variety welding measurement (Height of bead weld, Height of f illet weld, Throat thickness of f illet weld, Undercut depth, Beveling angle, Plate thickness and Root opening)
MATERIAL• Stainless steel (SUS410)
APPLICATION• For wide variety welding measurement (Height of bead weld, Height of f illet weld, Throat thickness of f illet weld, Undercut depth, Beveling angle, Plate thickness and Root opening)
MATERIAL• Stainless steel (SUS410)
FEATURES• Use for measuring during the welding processes• Additional function for measurement of plate thickness, width of bead weld, external diameter of circular work piece and swelling of pressure welding of reinforcing iron, etc.• Bead stride width: 53 mm• Beveling angle range (0-70°)• Easy reading scale
Item No.WGU-7MWGU-8M
Weight150g190g
SPECIFICATIONS
Front
Back
WGU-7M WGU-8M
Front
Back
(WGU-7M)DIMENSION
MEASUREMENT FUNCTION
(WGU-8M)DIMENSIONVernier 95
117
105
78
4282
BodyRotator
Vernier
Body 53Rotator
70
Height of fillet weld & bead weld4 Throat thickness of filletweld (0~15mm)
5Width of bead weld (0~53mm)9
6 Root Opening (2~5mm)Plate thickness (linear scale)7
WGU-7M · WGU-8M · WGU-9M WGU-8M · WGU-9M
External diameter of circular workpieceswelling of pressure welding etc.(WGU-8M : External Ø of circular workpiece up to 30mm)(WGU-9M : External Ø of circular workpiece up to 50mm)
8Undercut depth (0~25mm)1 Groove angle
(WGU-7M : 0~06°)(WGU-8M • WGU-9M : 0~70°)
2Inconsistent levelBead striding width (WGU-7M : 42mm) (WGU-8M WGU-9M : 53mm)Step difference (0~ 25mm)
3
www.sumipo
l.com
261
Gauge
Gauge
AirGauge
FeelerGauges
TaperGauge
Gauges
GaugesPin&
Ring Gauge
Thread Plug &Thread Ring
Gauge
Welding Gauges
APPLICATION• For wide variety welding measurement (Height of bead weld, Height of fillet weld, Throat thickness of fillet weld, Undercut depth, Beveling angle, Plate thickness and Root opening)
MATERIAL• Stainless steel (SUS420J2)
FEATURES• Measurement of thickness, width of bead welding and additional function for measurement of external diameter of circular work piece and swelling of pressure welding of reinforcing iron, etc.• Bead stride width: 53 mm• Beveling angle range (0-70°)• Function of undercut measurement is more accurate than previous items with the sharpness grinding of gauge head
117
10578
53
Vernier
BodyRotator
DIMENSION
Item No.
WGU-9M
Iron Diameter(mm)
Ø 19 ~ 35
Magni�cation
1/4, 1.0 ~ 1.6
Weight
190g
SPECIFICATIONS
Swelling length measuring
d
D=1.4d UP
D
MEASUREMENT FUNCTION
WGU-9MFront Back
L=1.1d UP
Swelling length measuring
L
dcore gap of pressured surface measuring
d
d UP= 14
www.sumipo
l.com
262
Gauge
AirGauge
FeelerGauges
TaperGauge
Gauges
Gauges
Pin&Ring G
auge
Thread Plug &Thread Ring
Gauge
Tel. 0-2762-3000 www.sumipol.com
Welding Gauges
APPLICATION• For undercut depth and length measurement (Scale range: 0~2mm)
MATERIAL• Stainless steel (SUS410)
FEATURES• Easy to measure depth and length of undercut• Screw type of gauge head can be adjusted to zero-point.• 0 Adjustment : Press this gauge to the measuring sample. Turn the measuring piece to adjust 0 on the condition, which the three points are all straight on the sample.• Measurement : After 0 adjustment, put the measuring piece on the undercut, then the spring will be lifted and the graduation indicated is the depth of undercut
Item No.WGU-2S
Weight100g
SPECIFICATIONS
DIMENSION FIGUREScale for undercut length measurement
(linear measurement)
Gauge head
Long slotMeasurement base
(fixed type)
Measurement base(portable type)
Scale for undercut depthmeasurement
www.sumipo
l.com
263
Gauge
Gauge
AirGauge
FeelerGauges
TaperGauge
Gauges
GaugesPin&
Ring Gauge
Thread Plug &Thread Ring
Gauge
Welding Gauges
Digital Welding Gauges
APPLICATION• Use for measuring the size of f illet weld and bead weld
MATERIAL• Stainless steel
FEATURES• Made of stainless steel which is easy for anti-rust coating• Beveling angle of 60°,70°,80° and 90°
APPLICATION• Use for measuring the size of f illet weld and bead weld
MATERIAL• Stainless steel
FEATURES• Easy to read with digital display• Beveling angle of 60°, 70°, 80° and 90°• Master gauge attached• Hold function available
DIMENSION FIGURE
Item No.Maximum Measurement Range of Fillet WeldMaximum Measurement Range of Bead WeldAccuracyMinimum ResolutionWeight
AWG-1011mm8mm±0.2mm0.1mm80g
Item No.Maximum Measurement Range of Fillet WeldMaximum Measurement Range of Bead WeldMinimum ResolutionAccuracy Repeat AccuracyMaximum Response SpeedWorking Temperature
Operation Power
Weight
DWG-2020mm10mm0.01mm0 ~ 10mm ±0.03mm, 10 ~ 20mm ±0.05mm0.02mm1.5m/s0 ~ 40°CSR44 (silver oxide battery)1 piece attached for testing230g
*Not include measurement error (±1 count)
Measuring bead weld
Bead weld(Height)
Fillet weld(Throat thickness)
Angle measuring
Miscellaneous measuring
SPECIFICATIONS
Bead weld(Height)
Fillet weld(Throat thickness)
SPECIFICATIONS
Master gauge(accessory)
DIMENSION FIGURE
www.sumipo
l.com
264
Gauge
AirGauge
FeelerGauges
TaperGauge
Gauges
Gauges
Pin&Ring G
auge
Thread Plug &Thread Ring
Gauge
Tel. 0-2762-3000 www.sumipol.com
Angle Limit Gauge
APPLICATION• Use for measuring bevelling angle of T joint (interior angle), bevelling angle of facing joint (interior angle), leg length (height), and throat thickness of fillet weld
MATERIAL• SUS304
FEATURES• Indication of size limit for easy judgement (Angle step up by 2.5°, throat thickness step up by 1mm)• Provided with plastic case and ball chain
EXAMPLES OF USE
Ex.1 Bevelling angle (interior)of T joint
Ex.2 Bevelling angle (interior)of facing joint
SPECIFICATIONS
Ex.3 (Throat thickness)of f illet weld
Ex.4 Leg lengthof f illet weld
Material •Finishing
Item No.
Blank No.
Accuracy
Weight
92
SUS304 barrel semi-gross f inishing
Fillet weld • Reinforcement ±0.1mm angle ±1°
100g
1.5
Outline
Dimension
(mm)
Measurement
Value
Indication
Full Width
Full Height
Plate Thickness
Angle Degree (Both Sides)
Throat Thickness (Front)
Leg Length (Back)
WAL2542 WAL4562
1
46
25°
27.5°
4
5
2
45
30°
32.5°
5
7
3
44
35°
37.5°
6
8
4
43
40°
42.5°
7
10
1
43
45°
47.5°
8
11
2
44
50°
52.5°
9
13
3
45
55°
57.5°
10
14
4
46
60°
62.5°
11
15
92
SUS304 barrel semi-gross f inishing
Fillet weld • Reinforcement ±0.1mm angle ±1°
120g
1.5
WAL2542
Throat thickness
LegLength
Leg Length
WAL4562
www.sumipo
l.com
265
Gauge
Gauge
AirGauge
Pin&Ring G
auge
Thread Plug &Thread Ring
Gauge
FeelerGauges
TaperGauge
Gauges
Gauges
Root Limit Gauge
APPLICATION• Use for measuring root gap of T joint or facing joint, leg length (height) of fillet weld and excess weld, and height of facing joint
MATERIAL• SUS304
FEATURES• Measure with 1mm interval• The measurement result of root thickness will be indicated with the graduation scale• Provided with plastic case & ball chain
EXAMPLES OF USE
Ex.1 Root gap of T joint Ex.2 Reinforcement height offacing joint
Ex.3 Leg length (height) offillet weld
Ex.4 Root gap of facing joint
SPECIFICATIONSItem No.Blank No.
AccuracyWeight
OutlineDimension(mm)
90202
2020± 0.1mm60g
90202
2020± 0.1mm90g
MeasurementValueIndication
Full WidthFull HeightPlate Thickness
Root Gap (Front)Leg Length • Height (Back)Root Side (Front)Plate Thickness (Back)
WRL310 WRL11181 2 3 4 1 2 3 4
3 • 416 • 17
5 • 614 • 15
7 • 812 • 13
9 • 1010 • 11
11 • 128 • 9
13 • 146 • 7
15 • 164 • 5
17 • 182 • 3
WRL310WRL1118
4mm
3mm
3mm
2mm
16mm
17mm
17m
m
18mm
Material • Finishing SUS304 barrel semi-gross f inishingSUS304 barrel semi-gross f inishing
www.sumipo
l.com
266
Gauge
AirGauge
FeelerGauges
TaperGauge
Gauges
Gauges
Pin&Ring G
auge
Thread Plug &Thread Ring
Gauge
Tel. 0-2762-3000 www.sumipol.com
Radius Gauges
Radius Gauges (Set/Single Part)
SPECIFICATIONS
No. of Leaves
1.0 ~ 3.0 (0.25 interval)3.5 ~ 7.0 (0.5 interval)
7.5 ~ 15.0 (0.5 interval)
15.5 ~ 20.0 (0.5 interval)21.0 ~ 25.0 (1.0 interval)
Details of Radius Dimension(mm)
Item No.
RG-34
RG-32
RG-30
34
32
30
±0.042
±0.042
±0.042
Accuracy(mm)
65g
115g
110g
Weight
APPLICATION• Use for checking the radius curve of dies, jigs, and wooden mould, etc.
MATERIAL• Carbon steel for machine structure
FEATURES• Concave and convex gauges are separated to left and right side
APPLICATION• Use for checking radius curve of dies, jigs and wooden mould etc.
MATERIAL• Carbon steel for machine structure
FEATURES• Each size is separated, suitable for measuring the difficult place
RG-32
Single Part
Set
RGL-05RGL-10RGL-15RGL-20RGL-25RGL-30RGL-35RGL-40RGL-45RGL-50RGL-55RGL-60RGL-65RGL-70RGL-75RGL-80RGL-85RGL-90RGL-95RGL-100RGL-105RGL-110RGL-115RGL-120RGL-125RGL-130
(Radius Gauge Single Part)
Item No.Details of R
Dimension (mm)0.51.01.52.02.53.03.54.04.55.05.56.06.57.07.58.08.59.09.510.010.511.011.512.012.513.0
SPECIFICATIONS
RG-26S
Item No. Pieces/Set
26
Accuracy
±0.05
Weight
290g
Details of R Dimension(mm)
0.5 ~ 13.0 (0.5 interval)
SPECIFICATIONS (Radius gauge set)
www.sumipo
l.com
267
Gauge
AirGauge
FeelerGauges
TaperGauge
Gauges
GaugesPin&
Ring Gauge
Thread Plug &Thread Ring
Gauge
Welding Gauges
Welding GaugeFEATURES• Made of stainless steel which is solid and anti-rust• Compact size with a hanging case, so easy to carry• Can be used to measure undercut and the swelling after pressure welding• Bead striding width 53mm
APPLICATION• Measurement during welding process of general welding, construction, shipbuilding, bridge construction, etc.MATERIAL• Body : Stainless steel (SUS420J2)MADE IN• Japan
EXAMPLE OF USAGE
TWGU-8M
TWGU-8MReverse side
TWGU-8MTWGU-7MTWGU-2STWG-1TWG-2TAWG-10TDWG-20
O
O
×
O
O
O
O
O
O
×
O
O
×
×
O
O
×
O
O
O
O
O
O
O
×
×
×
×
O
O
×
O
O
×
×
O
O
×
O
O
×
×
O
O
×
O
O
×
×
O
O
×
O
O
×
×
O
×
×
×
×
×
×
Height ofBead Weld
Height ofFillet Weld
Depth ofUndercut
BevelingAngle
PlateThickness
OpeningDiameter
Round BarThickness Root Face
Throat Thicknessof Fillet Weld
MeasurementPoint
Model
SPECIFICATIONS
±0.6
Throat Thickness of Fillet
Weld Measurement Accuracy (mm)
±2
Angle Measurement
Accuracy (°)Model
TWGU-8M 1
Piece Per
Pack
Weight
(g)
156
Welding GaugeFEATURES• Made of stainless steel which is solid and anti-rust• Compact size with a hanging case, so easy to carry• Can be used to measure undercut• Easy to read with the rotor graduations on the same surface
APPLICATION• Measurement during welding process of general welding, construction, shipbuilding, bridge construction, etc.MATERIAL• Body : Stainless steel (SUS430)MADE IN• Japan
EXAMPLE OF USAGETWGU-7M
TWGU-7MReverse side SPECIFICATIONS
±0.6
Throat Thickness of Fillet
Weld Measurement Accuracy (mm)
2
Angle Measurement
Accuracy (°)Model
TWGU-7M 1
Piece Per
Pack
Weight
(g)
140
Welding GaugeFEATURES• High accuracy gauge specifically use for undercut• Made of stainless steel which is solid and anti-rust• Compact size with a hanging case, so easy to carry• Maximum measurement value : 2mm• Minimum measurement value : 0.2mm
APPLICATION• Measurement during welding process of general welding, construction, shipbuilding, bridge construction, etc.
MATERIAL• Body : Stainless steel (SUS410)• Spring • Gauge head • Screw : SteelMADE IN• Japan
EXAMPLE OF USAGE
TWGU-2SUse for precision undercut measurement
(1 scale = 0.2mm)
SPECIFICATIONS
±0.1
Accuracy
(mm)
1
Piece Per
PackModel
TWGU-2S
Weight
(g)
90
www.sumipo
l.com
268
Gauge
AirGauge
FeelerGauges
TaperGauge
Gauges
Gauges
Pin&Ring G
auge
Thread Plug &Thread Ring
Gauge
Tel. 0-2762-3000 www.sumipol.com
Welding Gauge
TWG-1
TWG-1
Dimension measurement accuracy ±0.4mm
Dimension measurement accuracy ±0.2mm
Minimum reading value 0.1mm
SPECIFICATIONS
Model
TWG-1 ±0.4
Throat Thickness of Fillet Weld Measurement
Accuracy (mm)±0.4
Root Opening Measurement Accuracy (mm)
±0.7
AngleMeasurement
Accuracy (°)1
Piece Per
Pack100
Weight(g)
FEATURES• Made of stainless steel which is solid and anti-rust• Compact size with a hanging case, so easy to carry
APPLICATION• Measurement during welding process of general welding, construction, Shipbuilding, bridge construction, etc.
MADE IN• Japan
MATERIAL• Stainless steel (SUS410)
EXAMPLE OF USAGE
Welding Gauge
TWG-2
TWG-2SPECIFICATIONS
Model
TWG-2 ±0.2
Throat Thickness of FilletWeld Measurement
Accuracy (mm)±0.4
Root OpeningMeasurementAccuracy (mm)
±0.7
AngleMeasurement
Accuracy (°)1
PiecePer
Pack130
Weight(g)
FEATURES• High precision type model TWG-1• Made of stainless steel which is solid and anti-rust• Compact size with a hanging case, so easy to carry
APPLICATION• Measurement during welding process of general welding, construction, shipbuilding, bridge construction, etc.
MADE IN• Japan
MATERIAL• Stainless steel (SUS410)
EXAMPLE OF USAGE
Welding Gauge
TAWG-10SPECIFICATIONS
ModelTAWG-10 ±0.2
Accuracy (mm)1
Piece Per Pack59
Weight (g)
FEATURES• Use to measure the size of bead weld • fillet throat thickness • groove angle• Compact size and light weight• Maximum measurement range of bead weld: 8mm• Maximum measuring range of fillet weld: 11mm• Minimum reading: 0.1mm• Beveling angle of: 60° • 70° • 80° • 90°
APPLICATION• Measurement during welding process of general welding, construction, shipbuilding, bridge construction, etc.
MADE IN• China
MATERIAL• Stainless steel (SUS420J2)
EXAMPLE OF USAGE
Welding Gauge
TDWG-20 SPECIFICATIONSModel
TDWG-20
RepeatAccuracy (mm)
0.02
Accuracy
0 ~ 10mm (±0.03mm)/10 ~ 20mm (±0.05mm)
1
Piece PerPack
81
Weight(g)
FEATURES• Use to measure the size of bead weld • fillet throat thickness • groove angle• High accuracy digital gauge• Maximum measurement range of bead weld: 10mm• Maximum measuring range of fillet weld: 20mm• Minimum reading : 0.01mm• Beveling angle of: 60° • 70° • 80° • 90°
APPLICATION• Measurement during welding process of general welding, construction, shipbuilding, bridge construction, etc.
MADE IN• China
MATERIAL• Body : ABS resin (ABS)• Measurement face • Scale : Stainless steel (SUS420J2)
ACCESSORIES• Zero setting master right angle ruler 1 piece, SR44 button cell battery for testing 1 piece
EXAMPLE OF USAGE
Minimum reading value 0.1mm
www.sumipo
l.com
269
Gauge
AirGauge
FeelerGauges
TaperGauge
Gauges
GaugesPin&
Ring Gauge
Thread Plug &Thread Ring
Gauge
Radius Gauge
178MA
SPECIFICATIONS
67×14
67×14
108×26
175×45
245×60
Dimension
(mm)0.1•0.2•0.3•0.4•0.5•0.6•0.7•0.8•0.9•1.0
0.75•1.0•1.25•1.5•1.75•2.0•2.25•2.5•2.75•3.0•3.25•3.5•3.75•4.0•4.25•4.5•4.75•5.0
5.5•6.0•6.5•7.0•7.5•8.0•8.5•9.0•9.5•10.0•10.5•11.0•11.5•12.0•12.5•13.0
13.0•14.0•15.0•16.0•17.0•18.0•19.0•20.0•21.0 •22.0
23.0•24.0•25.0•26.0•27.0•28.0•29.0•30.0
Set Details (mm)Model
178MAA
178MA
178MB
178MC
178MD
1
1
1
1
1
Piece Per
Pack
10
18
16
10
8
Number
of Leaf (pcs.)
45
55
150
390
600
Weight
(g)
0.1 ~ 3.0
3.25 ~ 23.0
24.0 ~ 30.0
Leaf Thickness
(mm)
±0.03
±0.04
±0.05
Accuracy
(mm)
FEATURES• Use for inspection of construction works, die, moulding parts or R (radius) of circular parts, etc.• Made in concave and convex shape
APPLICATION• Use for measuring the radius of an object
MATERIAL• Cold rolled steel coil (SPCC)
MADE IN• Japan
EXAMPLE OF USAGE
Radius Gauge
272MA
SPECIFICATIONS
67×14
67×14
108×26
175×45
245×60
Dimension
(mm)0.1•0.2•0.3•0.4•0.5•0.6•0.7•0.8•0.9•1.0
0.75•1.0•1.25•1.5•1.75•2.0•2.25•2.5•2.75•3.0•3.25•3.5•3.75•4.0•4.25•4.5•4.75•5.0
5.5•6.0•6.5•7.0•7.5•8.0•8.5•9.0•9.5•10.0•10.5•11.0•11.5•12.0•12.5•13.0
13.0•14.0•15.0•16.0•17.0•18.0•19.0•20.0•21.0 •22.0
23.0•24.0•25.0•26.0•27.0•28.0•29.0•30.0
Set Details (mm)Model
272MAA
272MA
272MB
272MC
272MD
1
1
1
1
1
Piece Per
Pack
10
18
16
10
8
Number
of Leaf (pcs.)
45
55
150
390
600
Weight
(g)
0.1 ~ 3.0
3.25 ~ 23.0
24.0 ~ 30.0
Leaf Thickness
(mm)
±0.03
±0.04
±0.05
Accuracy
(mm)
FEATURES• Use for measuring R (radius) of edge of construction works• Integrated type of both concave and convex sectionsAPPLICATION• Use for measuring the radius of an object
MATERIAL• Cold rolled steel coil (SPCC)
MADE IN• Japan
EXAMPLE OF USAGE
Radius Gauge Set (L type)
L300MX
SPECIFICATIONS
160×40
160×85
140×140
140×140
160×85
Dimension
(mm)0.5•1.0•1.5•2.0•2.5•3.0•3.5•4.0•4.5•5.0•5.5•6.0•6.5•7.0
7.5•8.0•8.5•9.0•9.5•10.0•10.5•11.0•11.5•12.0•12.5•13.0
13.5•14.0•14.5•15.0•15.5•16.0•16.5•17.0
17.5•18.0•18.5•19.0•19.5•20.0•20.5•21.0
0.5•1.0•1.5•2.0•2.5•3.0•3.5•4.0•4.5•5.0•5.5•6.0•6.5•7.0•7.5•8.0•8.5•9.0•9.5•10.0•10.5•11.0•11.5•12.0•12.5•13.0
Set Details (mm)Model
L300MA
L300MB
L300MC
L300MD
L300MX
1
1
1
1
1
Set Per
Pack
14
12
8
8
26
Number
of Leaf (pcs.)
95
230
605
605
310
Weight
(g)
FEATURES• Very convenient for measurement R (radius) of circular parts• Accuracy : 0.2~21.0 (±0.03mm)
APPLICATION• Use for measuring R (radius) of edge of construction works
MATERIAL• Hardness Stainless Steel
MADE IN• Japan
EXAMPLE OF USAGE
www.sumipo
l.com
270
Gauge
AirGauge
FeelerGauges
TaperGauge
Gauges
Gauges
Pin&Ring G
auge
Thread Plug &Thread Ring
Gauge
Tel. 0-2762-3000 www.sumipol.com
EXAMPLE OF USAGE
EXAMPLE OF USAGE
EXAMPLE OF USAGE
EXAMPLE OF USAGE
Chamfering Measurement Gauge
Chamfer Measuring Gauge
Pitch Gauge
Acme Screw Pitch Gauge
SPECIFICATIONSModelTG-15C
Piece Per Pack
1
Weight (g)200.5 ~ 15
Measurement Range (º)
FEATURES• Minimum reading value: 0.5mm
APPLICATION• Use for measuring the size of all kind of chamfering
MADE IN• Japan
MATERIAL• Stainless steel (SUS420J2)
SPECIFICATIONS
Model
C-215C-163C-5C-10
Set Details(mm)
0.2•0.3•0.4•0.5•0.6•0.7•0.8•0.9•1.0•1.1•1.2•1.3•1.4•1.51.6•1.7•1.8•1.9•2.0•2.1•2.2•2.3•2.4•2.5•2.6•2.7•2.8•2.9•3.00.5•1.0•1.5•2.0•2.5•3.0•3.5•4.0•4.5•5.05.5•6.0•6.5•7.0•7.5•8.0•8.5•9.0•9.5•10.0
14151010
Number ofLeaf
1111
Set PerPack
404336100
Weight(g)
Measurement Size(mm)
SPECIFICATIONS
Model
137156158159JIS
Set Details(mm)
4•4 1/2•5•6•7•8•9•10•11•12•13•14•16•18•19•20•22•24•25•26•28•30•32•40•48•60 ( )0.25•0.3•0.35•0.4•0.45•0.5•0.55•0.6•0.65•0.7•0.75•0.8•0.85•0.9•1.0•1.1•1.2•1.25•1.3•1.4•1.5•1.6•1.7•1.75•1.8•1.9•2.0•2.50.5•0.75•1.0•1.25•1.5•1.75•2.0•2.5•3.0•3.5•4.0•4.5•5.0•5.5•6.0•6.5•7.01.0•1.5•2.0•2.5•3.0•3.5•4.0•4.5•5.0•5.5•6.0•6.5•7.0•7.5•8.0•8.5•9.0•9.5•10.0•10.5•11.0•11.50.25•0.3•0.35•0.4•0.45•0.5•0.75•0.9•1.0•1.25•1.5•1.75•2.0•2.5•3.0•3.5•4.0•4.5•5.0•5.5•6.0
2628172221
Number ofLeaf
11111
Set PerPack
5760458053
Weight(g)
70×1570×1570×1587×2070×15
Dimension(mm)
FEATURES• Chamfering measurement can be easy, quick and accurate to improve work efficiency• Accuracy : ±0.03mmAPPLICATION• Use for chamfering inspection (45° chamfering)
MADE IN• Japan
MATERIAL• Stainless steel (thickness 0.6mm) (SUS430)
FEATURES• Pitch of general screw can be measured easily and accurately• Accuracy : 0.25~1.3(±0.03mm) • 1.4~7.0 (±0.05mm) • 7.5~11.5(±0.07mm)
APPLICATION• Use for screw pitch
MADE IN• Japan
MATERIAL• Cold rolled steel coil (SPCC)
FEATURES• Pitch of the acme screw can be measured easily and accurately• Accuracy : 2~7mm(12 pitch~3 1/2)±0.03mm 8~16mm(3 pitch~1 1/3)±0.05mm 20mm(1 pitch)±0.05mm
MADE IN• Japan
MATERIAL• Stainless steel (thickness 0.8mm) (SUS430)
C-5
137
29-730
TG-15C
SPECIFICATIONSModel30-72029-730
Dimension (mm)121×38121×38
Details12 pcs.30°, 2-20mm
16-29°, 1-12pitch (inch)2, 3, ±0.02, 4,5,6,7,8,9,10,12,16,201,1 1/3,1 1/2,13/4,2,2 1/2,3,3 1/2,4,5,6,7,8,9,10,12
Set Details(mm) Number of Leaf Set Per Pack Weight (g)
1216
11
205250
0.2 ~ 1.5(0.1 )1.6 ~ 3.0(0.1 )0.5 ~ 5.0(0.5 )5.5 ~ 10.0(0.5 )
www.sumipo
l.com
271
AirGauge
Pin&Ring G
auge
Thread Plug &Thread Ring
Gauge
FeelerGauges
TaperGauge
Gauges
GaugesGauge
TG-A
652
466
TG-DP118
Drill-Tip Gauge
Drill-Point Gauge
Center Gauge
Angle Gauge Set
SPECIFICATIONS
60·70·90·118·125·135·150·160
Model
TG-A
Piece PerPack
1
Weight(g)11
Measurement Range(º)
FEATURES• 8 types of edge angle are useful when grinding
APPLICATION• Use for measuring drill-tip after grinding
MADE IN• Japan
MATERIAL• Stainless steel (SUS420J2)
EXAMPLE OF USAGE
SPECIFICATIONS
55°60°55°60°
Angle
±10’±10’±3’±3’
Accuracy
1/14, 1/20, 1/24, 1/32inch1, 1/2mm
--
GraduationsModel
65165255-Y60-Y
Material
Cold rolled steel coil (SPCC)Cold rolled steel coil (SPCC)Carbon tool steel (SK3) grade A hardenedCarbon tool steel (SK3) grade A hardened
1111
Piece PerPack
12124646
Weight(g)
APPLICATION• Use for inspection of the angle of lathe center, angle of the tool for screw cutting• Accuracy : 651• 652(±10'), 55-Y-60-Y (±3')
MADE IN• Japan
FEATURES• The gauge use for angle inspection• Accuracy : ±10'APPLICATION• Use for inspection of internal angle, angle of 14 1/2° acme screw
MATERIAL• Cold rolled steel coil (SPCC)
MADE IN• Japan
EXAMPLE OF USAGE
EXAMPLE OF USAGE
SPECIFICATIONS
Model
TG-DP118
Piece PerPack
1
Weight(g)160118
Measurement Range(º)
SPECIFICATIONS
Model
466
Numberof Leaf
18
Piece PerPack
1
Weight(g)
1551° 2° 3° 4° 5° 7° 8° 9° 10° 12°
14° 14 1/2° 15° 20° 25° 30° 35°45°
Indicated Angle
FEATURES• Use for measuring the drill edge length 3mm ~ 45mm and right and left angles can be measured at the same time
APPLICATION• Measurement length and angle of drill edge
MADE IN• Japan
MATERIAL• Main scale • Rotor : Stainless steel (SUS420J2) Base : Rolling material for general structure (SS400)
EXAMPLE OF USAGE
www.sumipo
l.com