general price listonlinedata.cz/uhlik-spojky/cenik2007.pdf · 2007-05-03 · the progress we have...

Piping. Systems. Solutions.F O R O V E R 8 0 Y E A R S

General Price List

BELGIUM (EUROPE HEADQTRS.)Prijkelstraat 36B9810 Nazareth (Belgium)tel. +32 93 81 1500fax +32 93 80 4438

UNITED ARAB EMIRATESP.O. Box 17683Jebel AliDubai (United Arab Emirates)tel. +971 48 838 870fax +971 48 838 860

UNITED KINGDOMUnit 14, Arlington Business ParkWhittle WayStevenageHertfordshire, SG1 2BD (UK)tel. +44 143 874 1100fax +44 143 831 3883

AUSTRIALaaerstrasse 622100 Korneuburg (Austria)tel. +43 226 262 084fax +43 226 262 084 15

SPAINAutovia Madrid-Barcelona KM 45,000Avda. De Milan 1819200 Azuqueca De Henares (Spain)tel. +34 949 348 490fax +34 949 266 848

SWEDENBillesholmsvagen 6Findus industriomrade267 40 Bjuv (Sweden)tel. +46 42 88440fax +46 42 88449

UNITED STATES (WORLD HEADQTRS.)PO box 314901 Kesslersville RoadEaston, PA 18044-0031 (USA)tel. +1 610 559 3300fax +1 610 250 8817

CANADA123 Newkirk RoadRichmond Hill, ON L4C 3G5 (Canada)tel. +905 884 7444fax +905 884 9774

AUSTRALASIA4/F, No. 321Tian Yao Qiao RoadShanghai 200030 (China)tel. +86 21 54253300fax +86 21 54253671

VICTAULIC LOCATIONS

VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2007 VICTAULIC COMPANY. ALL RIGHTS RESERVED.

UPDATED 2/2007 PLGEN-EUR 4381 REV B

WCAS-6VEJBH

www.victaulic.com

The Victaulic website is an information resource that can help you with your piping projects. Among the many resources available at the site:

• Fully searchable product and project databases

• Free product submittals

• Free product literature

• Piping software demos and modules

• Information on new product innovations

• Support services, and more...

valid from 1 FEBRUARY 2007€

TABLE OF CONTENTS

TA

BLE

OF

CO

NT

EN

TS

Table of ContentsTable of Contents

General

Victaulic Product Delivery System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Gasket Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Section 1 – Couplings and Fittings

Grooved IPS Pipe Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Style 07 Zero-Flex® Rigid Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Style W07 AGS Rigid Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Style 77 Standard Flexible Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Style W77 AGS Flexible Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Style 770 Large Diameter Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Style 75 Flexible Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Style 750 Reducing Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Style 741 Vic-Flange® Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Style 743 Vic-Flange® Grooved Flange Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Vic-Flange® Adapter Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Style 72 Outlet Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Style 78 Snap-Joint® Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Style HP-70 Rigid Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Style HP-70ES EndSeal® Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Style 307 Transition Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Style 775 Coupling for PVC Plastic Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Grooved IPS Pipe Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22No.10, No.11, No.12, No.13 Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22No. W10, No. W11, No. W12, No. W13 Elbows AGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23No.100, No.110 Long Radius Elbows 1¹/₂ D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23No. W100, No. W110 AGS Long Radius Elbows 1¹/₂ D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24No. 20, No. 29M, No. 35, No. 33 Tee, Cross, and Wye. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24No. W20, No. W29M, No. W35, No. W33 AGS Tee, Cross, Wye and Cap . . . . . . . . . . . . . . . . . . . . . . . . . . 25No. 10, No. 11, No. 20 Box Packing Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25No. R-10G, No. 11, No. R-10F Reducing Base Support Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26No. 40, No. 42, No. 43 Adapter Nipples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26No. W42, No. W43, No. W49 AGS Adapter Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26No. 80 Female Threaded Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27No. 18, No. 19 Adapter Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27No. 25 Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28No. W25 AGS Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30No. 29T Reducing Tee with Threaded Branch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31No. 29T Reducing Tee with Female Threaded Branch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32No. 50, No. 51 Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33No. W50, No. W51 AGS Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35No. 53, No. 54, No. 55 Swaged Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35No. 52 Reducer Threaded Small End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36No. 30 Lateral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Standard price list in EUR, valid from 1 February 2007 until further notice.

1

2

TABLE OF CONTENTS

TA

BLE

OF

CO

NT

EN

TS

No. W30 AGS Lateral. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37No. 60 Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37No. 60 Cap with Threaded Hole Concentric or Eccentric. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38No. 30-R Reducing Laterals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40No. W30-R AGS Reducing Lateral. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41No. 32 Tee Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41No. 32-R Reducing Tee Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42No. 61 Bull Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42No. 48 Hose Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42No. 41, No. 45, No. 46 Flanged Adapter Nipples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43No. W45 AGS Flanged Adapter Nipple ANSI 150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43No. 10, No. 14, No. 11, No. 15, No. 12, No. 13 3D Long Radius Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . 443D Cast Elbow for Abrasive Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45No. 10, No. 14, No. 11, No. 15, No. 12, No. 13 5D Long Radius Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . 45No. 10, No. 14, No. 11, No. 15, No. 12, No. 13 6D Long Radius Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Extra Heavy “ES” EndSeal® Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47No. 62, No. 63, No. 64 Elbows and Tees. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47No. 22 Header Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Section 2 – Hole Cut Products

IPS Hole Cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Styles 920 and 920N Mechanical-T® Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Style 920 Mechanical-T® Cross . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Style 923 Vic-Let™ Strapless Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Style 924 Vic-O-Well™ Thermometer Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Section 3 – Valves and Specialties

Grooved IPS Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Series 761 Vic®-300 MasterSealTM Butterfly Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Handwheels for Gear Operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Series 761 Vic®-300 MasterSealTM Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Series 706, Series 709 Grooved End Butterfly Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Series W706, Series W709 AGS Butterfly Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Series 700 Grooved End Butterfly Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Series 726 Grooved End Ball Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Series 716 Vic-Check® Check Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Series W715 AGS Dual Disc Vic-Check® Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Series 779 Venturi Check Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Grooved IPS Pipe Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Series 731-I Suction Diffuser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Series W731 AGS Suction Diffuser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Style 732 Grooved End Vic-Strainers® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Style 730 Tee-Type Strainer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Style W730 AGS Tee-Type Strainer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61


TABLE OF CONTENTS

TA

BLE

OF

CO

NT

EN

TS

Style 733 Grooved End Flow Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Style 733, Style 734 Threaded or Sweat End Flow Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Style 150 Mover® Expansion Joint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Style 151 Mover® with Metal Bellows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Style 47 Clearflow Dielectric Waterway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Style 47-GG Steel (IPS) to Copper (CTS) Transition Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Section 4 – Spare Parts

Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Standard Gaskets For Styles 07, 75, 77 and 78 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Special Gaskets For Styles 07, 75, 77 and 78. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Standard "E" or "T" Gaskets For Style 750 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Steel Rings For Style 750 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Standard "E" or "T" Gaskets For Style 005 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Gaskets For Styles 741 and 743 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Gaskets For Styles 90, 99 and 995 Couplings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Special Gaskets For Style HP-70ES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Standard "E" or "T" Gaskets For Styles 920 and 920N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Flange Parts For Style 741, 743 Vic-Flange® Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Metal Liners For Styles 77, 75 and 78 Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70Plated Trackhead Bolts and Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70Electrical Continuity Clips For Style 75 and 77 couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Section 5 - Plain End Couplings

Products for Plain End Steel Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74Style 99 Roust-A-Bout® Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Products for Plain End HDPE Plastic Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Style 995 HDPE Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Style 995M HDPE Metric Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Style 994 Flange Adapter for HDPE Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76Style 997 Transition Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Section 6 – CopariteTM Products

Grooved Piping System for CopariteTM Tubing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78Style 606 Coupling for CopariteTM Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78CopariteTM Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78No. 660 Bronze (RG12) End Caps with Concentric Threaded Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79No. 650 CopariteTM Concentric Reducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79No. 652 CopariteTM Concentric Reducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80No. 625 CopariteTM Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80Dielectric Waterway Transition Fittings For CTS to IPS Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81


3

4

TABLE OF CONTENTS

TA

BLE

OF

CO

NT

EN

TS

No. 626 CopariteTM Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82Style 641 CopariteTM Connection Vic-Flange® Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83Series 608 CopariteTM Connection Butterfly Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83Valve Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84Operator Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Section 7 – Aluminum Products

Aluminum Products For Grooved End Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86Styles 77A and 78A Aluminum Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86Aluminum Fittings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86No 50A, No. 52A Aluminum Reducers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87No. 40A, No. 42A, No. 43A Aluminum Adapter Nipples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Section 8 – Stainless Steel Products

Type 316 Stainless Steel Couplings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90Style 77-S Flexible Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90Style 475 Lightweight Flexible Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90Style 489 Rigid Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91Style 441 Stainless Steel Vic-Flange® Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Ductile Iron Couplings for Stainless Steel Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92Style 89 Rigid Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Fittings Type 316 Stainless Steel Schedule 10S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93No. 410, No. 411 Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93No. 410, No. 411 Tees. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93No. 425 Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94No. 29Ti Reducing Tees with Female Threaded Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94No. 441N Flanged Adapter Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94No. 450 Concentric Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95No. 460 End Caps with or without Eccentric Threaded Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95No. 480 Female Threaded Adapter Nipples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Stainless Steel Butterfly Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96Series 763 Butterfly Valves (Bare Valve and Lever Lock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96Series 763 Butterfly Valves (Gear Operator) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96Series 763 Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96Series 726-S Grooved End Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Section 9 – Vic®-Ring System

Vic®-Ring Piping System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100Style 22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100Style 31 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100Style 44 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101Style 41 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101


TABLE OF CONTENTS

TA

BLE

OF

CO

NT

EN

TS

Section 10 – Pipe Preparation Tools

Grooving Machines and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104VE270FSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104VE268 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105VE272SFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106VE416FSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107VE414MC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108VE436MC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109VE108H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110VE106 Vic Groove-N-Go . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Groovers and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111VE226 B/S/M/C/BSS/MSS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111VE46 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111VE12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111VE26 S/C/SS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112VG28GD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112VG824 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112VG-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112Power Mule (External Power Source) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113VAPS 112 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113VAPS 224 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113VAPS 3036PS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113VEPS-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114VEHCT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114HCT 904. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114VCT1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

Terms and Conditions of Sale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116


5

6

TABLE OF CONTENTS

TA

BLE

OF

CO

NT

EN

TS


GENERAL

IND

EX

GeneralIndex

GeneralGeneral

Standard price list in EUR, valid from 1 February 2007 until further notice. 7

8

GENERAL

IND

EX

VICTAULIC PRODUCT DELIVERY SYSTEM

One of Victaulic's major objectives is to develop - globally and at all levels of our organisation - a busi-ness philosophy based around customer perspective. In order to maintain our market leadership and sustain our growth as a business, we believe we must provide you, our customer, with better quality of service by increasing effectiveness, not cost. This appears to be a paradox but, in fact, we found that the principles of Lean Manufacturing provided some very good answers.

Lean Organisation

We implemented the Victaulic Product Delivery System (VPDS); applying lean methods and principles to our organisation's processes. Essentially, the lean philosophy is about defining the value of your business from the customer's perspective. What is not valuable from the customer's perspective is considered waste (e.g. over-production, large inventories, scrap or defective products, waiting time, etc.) and therefore should be eliminated.

Today, Victaulic experiences the fruits of its labour, after completing the essential first phase of stream-lining the manufacturing process of high volume products. Similar improvements will continue to be made, of course, and not only in manufacturing but in administrative and supporting processes as well. So far, the VPDS implementation has resulted in:

• better workplace organisation through 5S initiatives• production flexibility through smaller batches• shorter product cycle times and elimination of stock ruptures• inventory management and demand analysis based on shorter histories and real-time data

processing• shorter lead times for products on "kanban"• general productivity increase up to 30 percent

The progress we have made is also visible in this price list. This 2007 General Price List features grey shaded cells to mark products with significantly reduced lead times. If you have any questions about these markings, or about VPDS in general, do not hesitate to ask your Victaulic representatives.


GENERAL

IND

EX

GASKET SELECTION GUIDE

StandardGasketsIPS

SpecialGasketsIPS

GRADETEMP.

RANGE COMPOUNDCOLORCODE *GENERAL SERVICE RECOMMENDATIONS

E –34°Cto

+110°CEPDM Green

Stripe

Recommended for hot water service within the specified temperature rangeplus a variety of dilute acids, oil-free air and many chemical services.NOT RECOMMENDED FOR PETROLEUM SERVICES.

T –29°Cto

+82°CNitrile Orange

Stripe

Recommended for petroleum products, hydrocarbons, air with oil vapors,vegetable and mineral oils within the specified temperature range; excepthot dry air over +60°C and water over +66°C.NOT RECOMMENDED FOR HOT WATER SERVICES.

E(Type A)

Ambient EPDM VioletStripe

Applicable for wet and dry (oil-free air) sprinkler services up to 12 Bar. Fordry services, Victaulic continues to recommend the use of FlushSeal® gas-kets.

GRADETEMP.

RANGE COMPOUNDCOLORCODE *GENERAL SERVICE RECOMMENDATIONS

M2 –40°Cto

+71°C

Epichloro-hydrin

WhiteStripe

Specially compounded to provide superior service for common aromaticfuels at low temperatures. Also suitable for certain ambient temperaturewater services.

V –1°Cto

+82°CNeoprene Yellow

Stripe

Recommended for hot lubricating oils and certain chemicals. Good oxidationresistance. Will not support combustion.

O –7°Cto

+149°C

Fluoro-elastomer

BlueStripe

Recommended for many oxidizing acids, petroleum oils, halogenated hydro-carbons, lubricants, hydraulic fluids, organic liquids and air with hydrocar-bons to +149°C.

L –34°Cto

+177°CSilicone Red

Gasket

Recommended for dry heat, air without hydrocarbons to +177°C and certainchemical services. FIT products silicone gaskets are recommended for fireprotection dry systems, all systems operating below -18°C, plus dry heat, airwithout hydrocarbons, certain chemical services, and water to +71°C.

A –7°Cto

+82°C

WhiteNitrile

WhiteGasket

No carbon black content. May be used for food. Meets FDA requirements.Conforms to CFR Title 21 Part 177.2600

TEnd-Seal®

–29°Cto

+66°CNitrile

None-ExternalIdentifi-cation

Specially compounded with excellent oil resistance and a high modulus forresistance to extrusion. Temperature Range –29°C to +66°C. Recom-mended for petroleum products, air with oil vapors, vegetable and mineraloils within the specified temperature range. Not recommended for hot waterservices over +66°C or for hot, dry air over +60°C. For maximum gasket lifeunder pressure extremes, temperature should be limited to +49°C. SpecialFire-R™ EndSeal® Gasket available, qualified to API 607 standards. Con-tact Victaulic Europe for details.

IMPORTANT PLEASE READ BEFORE ORDERING.Gasket selection must always be specified on your order.


10

GENERAL

IND

EX


SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LIN

GS

AN

D F

ITT

ING

S

1

Section 1Grooved IPS pipeCouplings and Fittings1

Couplingsand FittingsSection 1 - Couplings and Fittings


12

SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LING

S A

ND

FIT

TIN

GS

1

GROOVED IPS PIPE COUPLINGS

Style 07 Zero-Flex® Rigid Coupling

+ Quoted on application.* Number of bolts equals number of segments supplied.† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.§ American thread size bolts available, contact Victaulic.# Victaulic® products are available in full box quantities pre-packaged, ready for shipment in containers for the sizes listed. To expedite shipment and delivery of materials, it is recom-mended that orders be placed in the quantities shown.‡ Victaulic reserves the right to change box quantities.NOTE: See Section 4 for spare part prices.

Zero-Flex®

Rigid CouplingStyle 07

ULCUL¨

FM

VdSContact Victaulic-Europe

for details

PIPECOUPLING COMPLETE †

With "E" or "T" Gasket

COUPLINGCOMPLETE †

With FlushSeal®

"E" or "T" GasketFull Boxes#

Number Per Box SPARE PARTS

O.D.[mm]

Wgt.Each[kg]

Price Each Price Each

Qty. ‡ Wgt.

Plated Bolt & Nut

Painted Galv. Painted Galv. No.*Size §

[mm]33,7 0,7 €8,53 €10,25 €18,18 €21,19 500 350 2 10 x 5142,4 0,7 8,53 10,25 11,27 13,75 1.000 700 2 10 x 5148,3 0,7 8,62 10,34 12,03 14,51 1.000 700 2 10 x 5160,3 1,0 10,68 13,82 13,20 16,57 800 800 2 12 x 6473,0 1,3 12,34 16,22 15,45 19,54 500 600 2 12 x 7076,1 1,6 12,34 16,22 15,45 19,54 500 800 2 12 x 7088,9 1,4 14,42 19,05 18,09 23,01 500 700 2 12 x 64

108,0 2,4 20,50 27,10 24,76 29,31 400 960 2 12 x 70114,3 2,4 20,50 27,10 25,32 32,27 400 960 2 12 x 70133,0 3,4 26,61 35,23 31,95 41,02 200 680 2 16 x 83139,7 3,4 26,61 35,23 31,95 41,02 200 680 2 16 x 83141,3 3,4 26,61 35,23 32,51 41,61 200 680 2 16 x 83159,0 4,2 35,62 46,77 42,09 53,83 150 630 2 16 x 83165,1 3,8 35,62 46,77 42,67 50,37 150 570 2 16 x 83168,3 3,8 35,62 46,77 42,67 54,41 150 570 2 16 x 83219,1 6,8 54,03 69,41 61,69 77,68 100 680 2 20 x 108273,0 10,7 85,90 116,46 94,14 125,32 50 535 2 22 x 165323,9 12,8 98,83 120,87 104,91 140,05 40 512 2 22 x 165355,6 14,9 173,16 228,13 182,77 238,54 - - 3 22 x 127406,4 18,7 225,81 267,54 225,81 278,59 - - 3 22 x 127457,0 24,6 261,06 347,39 271,86 332,41 - - 3 22 x 127508,0 30,5 345,80 440,70 376,16 436,91 - - 4 24 x 127610,0 34,6 584,70 750,17 + + - - 4 24 x 127


SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LIN

GS

AN

D F

ITT

ING

S1

Style W07 AGS Rigid Coupling

+ Quoted on application.§ Metric thread size bolts available. Contact Victaulic.† Surcharge for couplings supplied without gasket. Contact Victaulic.NOTE: AGS products in sizes 355,6 - 610,0mm are designed for the new Advanced Groove System (AGS), which uses deeper and wider, wedge-shaped grooves compared to the traditional Victaulic grooved system.

Style W07 AGSRigid Coupling

Style W07

PIPE

Wgt.Each[kg]


With FlushSeal®

"E" or "T" Gasket SPARE PARTS

O.D.[mm]

Price Each Plated Bolt & Nut

Painted Galv. No.*Size §

[mm]355,6 22,2 €173,16 €228,13 2 1 x 5¹⁄₂

406,4 27,6 225,81 267,54 2 1 x 5¹⁄₂

457,0 32,3 261,06 347,39 2 1 x 5¹⁄₂

508,0 37,1 345,80 440,70 2 1¹⁄₈ x 5¹⁄₂

610,0 52,7 584,70 750,17 2 1¹⁄₈ x 5¹⁄₂


14

SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LING

S A

ND

FIT

TIN

GS

1

Style 77 Standard Flexible Coupling

+ Quoted on application.* Number of bolts equals number of segments supplied.† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.§ American thread size bolts available, contact Victaulic.# Victaulic® products are available in full box quantities pre-packaged, ready for shipment in containers for the sizes listed. To expedite shipment and delivery of materials, it is recom-mended that orders be placed in the quantities shown.‡ Victaulic reserves the right to change box quantities.NOTE: See Section 4 for spare part prices.NOTE: Electrical continuity clips are available for many coupling sizes. See Spare Parts section for details.

Standard FlexibleCouplingStyle 77

ULCUL¨

FM


for details




With FlushSeal®


Number Per Box SPARE PARTS

O.D.[mm]

Wgt.Each[kg]


Qty. ‡ Wgt.

Plated Bolt & Nut

Painted Galv. Painted Galv. No.*Size §

[mm]26,9 0,5 €10,25 €13,78 €18,82 €23,00 250 125 2 10 x 5133,7 0,6 10,25 13,78 18,82 23,00 250 150 2 10 x 5142,4 0,9 13,68 18,38 15,08 19,90 250 225 2 12 x 6448,3 1,0 14,98 20,06 17,02 22,20 250 250 2 12 x 6460,3 1,2 15,85 21,38 18,48 24,18 250 300 2 12 x 6473,0 1,4 19,02 26,41 22,26 27,59 250 350 2 12 x 7076,1 1,5 19,02 26,41 22,26 29,79 250 375 2 12 x 7088,9 1,7 21,06 29,32 24,83 33,40 250 425 2 12 x 70

101,6 2,5 30,73 43,33 35,09 45,78 - - 2 16 x 83108,0 5,0 30,73 43,33 35,09 49,44 - - 2 16 x 83114,3 3,0 30,73 43,33 35,66 48,74 300 900 2 16 x 83133,0 4,5 47,21 67,70 52,78 70,05 - - 2 20 x 108139,7 4,5 47,21 67,70 52,78 75,65 200 900 2 20 x 108141,3 4,8 47,21 67,70 52,78 75,65 - - 2 20 x 108159,0 6,0 55,71 79,97 63,03 89,54 - - 2 20 x 108165,1 6,0 55,71 79,97 63,03 89,54 150 900 2 20 x 108168,3 5,4 55,71 79,97 63,03 96,67 150 810 2 20 x 108219,1 9,4 90,97 130,70 98,76 139,19 100 940 2 22 x 127273,0 14,1 129,24 184,51 137,71 193,68 50 705 2 24 x 152323,9 12,6 147,14 209,73 156,19 219,52 40 504 2 24 x 165355,6 16,1 209,35 291,34 219,00 279,39 - - 4 24 x 89381,0 22,1 + + + + - - 4 24 x 140406,4 23,2 274,27 370,67 284,52 381,64 - - 4 24 x 89457,0 29,2 321,23 443,66 332,06 455,35 - - 4 24 x 89508,0 41,4 361,48 460,65 390,41 456,39 - - 4 30 x 102559,0 41,7 587,43 799,32 + + - - 4 30 x 102610,0 42,6 604,54 822,48 697,86 853,54 - - 6 24 x 140


SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LIN

GS

AN

D F

ITT

ING

S1

Style W77 AGS Standard Flexible Coupling

+ Quoted on application.§ Metric thread size bolts available. Contact Victaulic.† Surcharge for couplings supplied without gasket. Contact Victaulic.NOTE: AGS products in sizes 355,6 - 610,0mm are designed for the new Advanced Groove System (AGS), which uses deeper and wider, wedge-shaped grooves compared to the traditional Victaulic grooved system.Style 770 Large Diameter Coupling

NOTE: See Section 4 for spare part prices.+ Quoted on application.† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.*Number of bolts equals number of housing segments.

Style W77 AGS FlexibleCoupling

Style W77

PIPE

Wgt.Each[kg]


With FlushSeal®


O.D.[mm]

Price Each Plated Bolt & Nut

Painted Galv. No.*Size §

[mm]355,6 21,5 €209,35 €291,34 2 1 x 5¹/₂406,4 26,2 274,27 370,67 2 1 x 5¹/₂457,0 29,5 321,23 443,66 2 1 x 5¹/₂508,0 37,3 361,48 460,65 2 1¹/₈ x 5¹/₂610,0 48,4 604,54 822,48 2 1¹/₈ x 5¹/₂

Large Diameter CouplingStyle 770

PIPECOUPLING COMPLETE†

With "E" or "T" GasketSPARE PARTS

Plated Bolt & Nut

O.D.[mm]

Wgt.Each[kg]

Price EachNo.*

Size[Inches]Painted Galv.

711,0 79,0 €928,87 €1103,50 6 1¹/₄ x 3¹/₂762,0 91,0 940,99 1036,22 6 1¹/₄ x 3¹/₂813,0 102,0 1713,00 2190,56 6 1¹/₂ x 3¹/₂914,0 113,0 1784,18 1818,70 6 1¹/₂ x 4¹/₂

1.067,0 181,0 2439,89 2783,63 8 1¹/₂ x 4¹/₂


16

SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LING

S A

ND

FIT

TIN

GS

1

Style 75 Flexible Coupling

§ American thread size bolts available, contact Victaulic.* Style 74 with FlushSeal® 'E' gasket.† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.NOTE: See Section 4 for spare part prices.# Victaulic® products are available in full box quantities pre-packaged, ready for shipment in containers for the sizes listed.To expedite shipment and delivery of materials, it is recommended that orders be placed in the quantities shown.@‡ Victaulic reserves the right to change box quantities.+ Quoted on application.NOTE: Electrical continuity clips are available for many coupling sizes. See Spare Parts section for details.Style 750 Reducing Coupling

† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.§ American thread size bolts available, contact Victaulic.NOTE: See Section 4 for spare part prices.@Support Rings required on vertical installations. Please specify on order.

Flexible CouplingStyle 75

ULCUL¨

FM


for details




With FlushSeal®


Number Per BoxSPARE PARTS

O.D.[mm]

Wgt.Each[kg]


Qty. ‡ Wgt.

Pl. Bolt & Nut

Size §

[mm]Paint. Galv. Paint. Galv.33,7 0,5 + + + + - - 10 x 5142,4 0,6 €8,82 €10,55 €9,21 €11,04 500 300 10 x 5148,3 0,6 7,98 10,14 10,02 12,75 1.000 600 10 x 5160,3 0,8 8,37 10,51 11,00 13,28 1.000 800 10 x 5173,0 0,9 9,54 12,77 12,70 16,24 750 675 10 x 5176,1 0,9 9,54 12,77 12,70 16,24 750 675 10 x 5188,9 1,3 10,83 14,31 14,59 18,38 500 650 12 x 70

101,6 1,3 17,99 22,31 22,34 27,07 - - 12 x 70108,0 1,7 15,17 18,81 19,50 21,76 400 680 12 x 70114,3 1,9 15,17 18,81 20,08 24,18 400 760 12 x 70127,0 2,5 + + + + - - 16 x 83133,0 2,7 23,02 28,57 28,49 31,93 250 675 16 x 83139,7 2,9 23,02 28,57 28,49 34,48 250 725 16 x 83141,3 2,6 23,02 28,57 29,08 35,17 250 650 16 x 83152,4 2,9 + + + + - - 16 x 83159,0 3,1 26,37 33,47 33,05 37,66 200 620 16 x 83165,1 3,3 26,37 33,47 33,62 38,24 200 660 16 x 83168,3 3,2 26,37 33,47 33,62 41,29 200 640 16 x 83203,2 5,7 + + + + - - 20 x 102219,1 5,6 42,99 59,34 50,93 67,84 100 560 20 x 102254,0 9,4 + + + + - - 22 x 164304,8 10,7 + + + + - - 22 x 164

Reducing CouplingStyle 750

ULCUL¨

FM


for details

PIPE COUPLING COMPLETE† Full BoxesSPARE PARTS

O.D.[mm]

Wgt. Each[kg]

Price Each

Qty.Wgt.[kg]

Pl. Bolt & Nut

Size §

[mm]Painted Galv.60,3 x 33,7 0,9 €28,86 €35,24 - - 10 x 5160,3 x 48,3 1,0 23,02 28,20 - - 10 x 5173,0 x 60,3 1,4 30,01 38,57 - - 10 x 5176,1 x 60,3 1,5 36,05 46,50 - - 10 x 5188,9 x 60,3 2,1 34,44 44,48 - - 12 x 7088,9 x 73,0 1,9 29,61 38,46 - - 12 x 7088,9 x 76,1 2,0 36,05 46,50 - - 12 x 70

114,3 x 60,3 4,0 55,10 70,45 - - 16 x 83114,3 x 73,0 3,8 49,20 65,96 - - 16 x 83114,3 x 76,1 4,0 62,01 79,46 - - 16 x 83114,3 x 88,9 3,0 46,08 60,60 - - 16 x 83

141,3 x 114,3 4,9 62,20 83,05 - - 20 x 108165,1 x 114,3 6,9 94,31 120,50 - - 20 x 108168,3 x 114,3 7,5 94,31 120,52 - - 20 x 108168,3 x 141,3 5,7 82,51 108,49 - - 20 x 108219,1 x 165,1 6,8 + + - - 20 x 108219,1 x 168,3 10,1 141,54 181,63 - - 22 x 127


SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LIN

GS

AN

D F

ITT

ING

S1

Style 741 Vic-Flange® Adapters

† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.§ Bolts required to be supplied by installer, bolt sizes for conventional flange-to-flange connection.+ Quoted on application.@NOTE: See Section 5 for spare part prices.Style 741 Vic-Flange® Adapters

† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.The Vic-Flange® adapters utilize standard ANSI 125/150 flange bolts (supplied by installer). Bolt hole pattern is standard for ANSI CL. 150 and CL.125 flanges. Flanged Adapter Nipples are also available in ³⁄₄ and larger sizes in ANSI CL. 125, CL. 150, CL 300 and other ANSI ratings – quoted on application.+ Quoted on application.NOTE: See Section 4 for spare part prices.

Vic-Flange® AdaptersStyle 741Grooved Pipe Adapters to PN10 and PN16 Flanges

60,3 - 323,9 mm Sizes

UL¨FM

PIPE Vic-Flange®FLANGE COMPLETE†§

O.D.[mm]

Wgt. Each[kg]

PN10 - Price Each PN16 - Price Each

Painted Galv. Painted Galv.

STYLE 741 - Hinged

60,3 1,4 €63,44 €73,99 €63,44 €73,99

76,1 2,1 69,91 83,44 69,91 83,44

88,9 2,4 55,66 72,46 55,66 72,46

108,0 3,5 74,10 92,80 74,10 92,80

114,3 3,5 56,87 74,97 56,87 74,97

133,0 4,2 107,14 132,37 107,14 132,37

139,7 4,2 72,24 93,78 72,24 93,78

165,1 4,5 73,46 102,80 73,46 102,80

168,3 4,5 72,24 93,78 72,24 93,78

219,1 7,5 108,74 144,93 114,72 150,91

273,0 11,0 162,61 206,51 177,53 227,75

323,9 17,4 277,47 348,68 281,26 461,90

Vic-Flange® AdaptersStyle 741Grooved Pipe Adapters to ANSI Class 125 and 150 Flanges

60,3 - 323,9 mm Sizes

355,6 - 610,0 mm Sizes

ULCUL¨

FM

PIPE Vic-Flange®FLANGE COMPLETE†

O.D.[mm]

Wgt. Each[kg]

Price EachPainted Galv.

STYLE 741 - Hinged60,3 1,4 €58,44 €57,8773,0 2,1 55,78 69,8888,9 2,4 55,14 74,88

114,3 3,5 59,26 78,28141,3 4,2 79,69 103,07168,3 4,7 73,46 95,44219,1 7,5 104,25 140,15273,0 11,0 176,30 226,43323,9 21,2 283,77 371,03

STYLE 741 - Four Piece355,6 34,0 €471,46 €802,81406,4 40,8 566,45 889,93457,0 45,4 680,21 1194,11508,0 54,4 1509,44 1805,69610,0 72,6 1481,52 1665,63


18

SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LING

S A

ND

FIT

TIN

GS

1

Style 743 Vic-Flange®

§ Utilizes standard ANSI 300 flange bolts (supplied by installer). Bolt hole pattern is standard for ANSI CL. 300 flanges.† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.+ Quoted on application.NOTE: See Section 4 for spare part prices.

Vic-Flange® Adapter Notes

Vic-Flange® adapters require a smooth, hard surface at the mating flange face for effective sealing. Some applications for which the Vic-Flange adapter is otherwise well suited do not provide an adequate mating surface. In such cases, it is recommended that a metal Flange Washer be inserted between the Vic-Flange adapter and the mating flange to provide the necessary sealing surface. Typical applications where a Vic-Flange Washer should be used are:1. When mating to a serrated flange: a flange gasket should be used adjacent to the serrated flange and then the Flange Washer is inserted between the Vic-Flange® adapter and the flange gasket.2. When mating to a wafer valve: where typical valves are rubber lined and partially rubber faced (smooth or not), the Flange Washer is placed between the valve and the Vic-Flange® adapter.3. When mating to a rubber faced flange: the Flange Washer is placed between the Vic-Flange® adapters and the rubber faced flange.4. When mating C.I. flanges to IPS flanges: the Flange Washer is placed between two Vic-Flange® adapters. If one flange is not a Vic-Flange® adapter (e.g., flanged valve), then a flanged gasket must be placed adjacent to that flange and the Flange Washer inserted between the flange gasket and the Vic-Flange® adapter.5. When mating to components (valves, strainers, etc.) where the component flange face has an insert: follow the same arrangement as in Application 1.

Vic-Flange® Grooved Flange Adapters§

Style 743Grooved Pipe Adapters to ANSI Class 300 Flanges

ULCUL¨

FM

PIPE Vic-Flange®FLANGE ADAPTER COMPLETE †

O.D.[mm]

Wgt.Each[kg]


60,3 2,2 €53,29 €64,5273,0 3,4 61,87 76,0488,9 4,1 84,68 103,25

114,3 6,9 113,00 140,65141,3 8,0 128,43 159,63168,3 10,6 149,52 188,34219,1 15,6 171,63 222,24273,0 21,9 273,61 349,42323,9 32,0 292,36 387,15

Vic-Flange®Adapter Notes


SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LIN

GS

AN

D F

ITT

ING

S1

Style 72 Outlet Coupling

Style 72 Outlet Couplings supplied with painted housing, Grade 'E' gasket with plated neck insert and plated bolts and nuts.* BSPT and NPT threads available; contact Victaulic.† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.+ Quoted on application.NOTE: See Section 4 for spare part prices.

Style 78 Snap-Joint® Coupling

(a) Available with steel toggle locking assembly only.(b) Extended length cast handle standard; steel toggle is a no cost option.(c) Available with cast handle only.† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.NOTE: See Section 4 for spare parts prices.Style HP-70 Rigid Coupling

HP-70 couplings supplied with plated bolts and nuts.§ American thread size bolts available, contact Victaulic.† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.NOTE: See Section 4 for spare part prices.

Outlet CouplingStyle 72

ULCUL¨

FM

O.D.[mm]

Run x Br.

OUTLET COUPLING COMPLETE WITH "E" GASKET †

SPARE PARTSFemale Thd. Branch*

WgtEa.[kg]

Price Each Pl. Bolt& NutSize[mm]Paint. Galv.

48,3 x 33,7 + €46,74 €53,70 10 x 5160,3 x 33,7 1,5 48,04 61,40 10 x 5173,0 x 26,9 + 74,59 87,80 12 x 7073,0 x 48,3 3,9 92,95 104,10 16 x 8388,9 x 26,9 + 71,89 90,16 12 x 6488,9 x 48,3 3,9 109,72 119,51 16 x 83

114,3 x 33,7 2,8 106,22 125,86 12 x 64114,3 x 60,3 5,4 151,30 183,12 16 x 83168,3 x 33,7 + + 286,10 20 x 108168,3 x 60,3 8,2 214,20 264,91 20 x 108

Snap-Joint® CouplingStyle 78

PIPECOMPLETE COUPLINGWith "E" or "T" Gasket †

COMPLETE COUPLINGWith FlushSeal® Gasket †

O.D.[mm]

Wgt.Each[kg]


Painted Galv. Painted Galv.33,7 (a) 0,4 €34,67 €42,09 €36,42 €40,7142,4 (a) 0,5 34,67 42,09 36,42 40,7148,3 (a) 0,8 34,67 42,09 36,42 40,7160,3 (b) 0,8 36,69 45,27 38,53 47,2573,0 (b) 1,1 36,69 45,27 38,53 47,2588,9 (b) 1,4 47,40 57,31 49,78 59,87

114,3 (b) 2,5 50,66 66,13 55,59 70,24141,3 (c) 4,4 100,80 129,51 106,29 133,58168,3 (c) 5,2 109,29 140,04 114,84 144,80219,1 (c) 6,9 168,18 213,65 174,24 218,33

Rigid CouplingStyle HP-70With 77 Gasket

PIPE COUPLING COMPLETE † PlatedBolt & Nut

Size §[mm]

O.D.[mm]

Wgt.Each[kg]

Price Each

Painted Galv.60,3 1,5 €21,73 €29,71 16 x 7073,0 1,8 24,57 34,13 16 x 8988,9 2,1 27,51 38,13 16 x 89

114,3 3,7 40,68 58,74 20 x 108168,3 7,4 74,05 108,32 22 x 140219,1 11,8 119,21 173,81 24 x 140273,0 14,9 220,84 306,37 24 x 165323,9 20,9 322,51 437,27 24 x 165


20

SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LING

S A

ND

FIT

TIN

GS

1

Style HP-70ES EndSeal® Coupling

For use with cement-lined and plastic-coated pipe where protection at pipe ends is desired.§ American thread size bolts available, contact Victaulic.When EndSeal® Couplings (Style HP-70ES) are used, special pipe grooving dimensions are required. See Victaulic®General Catalog for details.Fittings for use with EndSeal® Couplings are of special dimensions and should be specified as "EndSeal® Fittings"when ordering.† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.NOTE: See Section 4 for spare part prices.Style 307 Transition Coupling

† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.+ Quoted on application.NOTE: See Section 4 for spare part prices.

EndSeal® CouplingStyle HP-70ESWith "ES" Gasket


With "ES" Gasket "ES"Gasket

OnlyPrice Each

PlatedBolt & Nut

Size §[mm]

O.D.[mm]

Wgt.Each[kg]


60,3 1,5 €29,08 €38,02 €13,70 16 x 7073,0 1,8 34,15 45,18 17,33 16 x 8988,9 2,0 38,36 51,03 19,22 16 x 89

114,3 3,4 54,30 74,52 24,38 20 x 108168,3 7,6 94,55 131,73 35,66 22 x 140219,1 11,9 146,39 201,03 48,32 24 x 140273,0 14,9 275,65 369,52 79,23 24 x 165323,9 19,1 347,98 467,30 90,12 24 x 165

Transition CouplingStyle 307

ULCUL¨

FM

PIPE

COUPLING COMPLETE †

with "M" or "S"FlushSeal® Gasket SPARE PARTS

O.D.[mm]

Mating Pipe O.D.

Wgt.Each[kg]

Price Each "M" or "S"

Flush-Seal®

Gasket OnlyPrice Each

Bolt & NutSize

[Inches]IPS

SteelAWWADuctile Painted Galv.

88,9 88,9 100,6 2,7 + + + ¹/₂ x 2³⁄₄

114,3 114,3 121,9 3,6 + + + ¹/₂ x 3¹⁄₄

168,3 168,3 175,3 4,1 + + + ⁵⁄₈ x 3¹⁄₄

219,1 219,1 229,9 8,2 + + + ³⁄₄ x 5273,0 273,0 281,9 10,0 + + + ⁷⁄₈ x 6¹/₂323,9 323,9 335,3 14,1 + + + ⁷⁄₈ x 6¹/₂


SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LIN

GS

AN

D F

ITT

ING

S1

Style 775 Coupling for PVC Plastic Pipe

† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.+ Quoted on application.NOTE: See Section 4 for spare part prices.

Coupling for PVC Plastic PipeStyle 775

PIPE


With "E" or "T" Gasket PlatedBolt & Nut

Size[Inches]

O.D.[mm]

Wgt.Each[kg]

PriceEach

Plated60,3 0,8 + ³/₈ x 273,0 1,0 + ³/₈ x 288,9 1,2 + ¹/₂ x 2³/₄

114,3 1,6 + ¹/₂ x 2³/₄168,3 3,6 + ⁵/₈ x 3¹/₄219,1 6,2 + ³/₄ x 4¹/₄273,0 8,9 + ³/₄ x 5³/₄323,9 10,9 + ³/₄ x 5³/₄


22

SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LING

S A

ND

FIT

TIN

GS

1

GROOVED IPS PIPE FITTINGS

Elbows

‡ Gooseneck design.§ See page 25 for Box Packing Schedule.Victaulic® fittings are made of ductile iron except those marked (sw) segmentally welded steel.

ElbowsNo. 10, No. 11, No. 12, No. 13

ULCUL¨

FM

No. 10 No. 11 No. 12 No. 13

O.D.[mm]

90˚ ELBOW No. 10§ 45˚ ELBOW No. 11§ 22¹˚ ELBOW No. 12 11¹⁄₄˚ ELBOW No. 13Wgt.Each[kg]

Price Each Wgt.Each[kg]



Price Each

Paint. Galv. Paint. Galv. Paint. Galv. Paint. Galv.26,9 0,2 €11,62 €14,39 0,2 €11,62 €15,86 – - - – - -33,7 0,3 13,84 16,22 0,3 13,84 16,22 0,3 €31,52 €37,39 0,1 (sw) €31,52 €36,2042,4 0,5 7,93 9,92 0,4 7,93 9,92 0,4 (sw) 38,25 44,70 0,2 (sw) 38,25 42,8748,3 0,5 8,84 11,29 0,5 8,84 11,29 0,4 (sw) 41,76 48,96 0,2 (sw) 41,76 51,8760,3 0,8 8,94 11,00 0,6 8,94 11,00 0,6‡ 16,15 21,51 0,5 16,21 24,3773,0 1,5 12,86 16,01 1,0 12,86 16,01 1,0‡ 22,54 29,54 0,7 (sw) 53,85 63,8176,1 1,7 12,86 16,01 1,1 12,86 16,01 – 145,55 118,56 – 190,14 +88,9 2,0 16,59 19,64 1,4 16,59 19,64 1,4‡ 32,98 40,86 1,0 32,98 40,19

101,6 2,5 22,59 28,28 2,0 53,14 61,13 1,8 (sw) + + 1,2 (sw) + +108,0 3,1 23,23 30,42 2,4 23,23 30,42 – - - – - -114,3 3,6 23,23 30,42 2,4 23,23 30,42 2,5 42,50 55,96 1,6 44,24 53,29133,0 5,4 55,87 69,44 3,8 55,87 69,44 – - - – - -139,7 4,3 55,87 69,44 3,8 55,87 69,44 – 227,24 202,72 – 185,98 +141,3 5,2 55,87 69,44 3,8 55,87 69,44 3,5 (sw) 137,43 168,26 2,2 (sw) 137,43 164,96159,0 5,8 68,23 88,47 4,5 68,23 88,47 – - - – - -165,1 7,0 68,23 88,47 4,5 68,23 88,47 5,2 254,35 309,40 3,4 125,45 171,95168,3 7,8 68,23 88,47 4,9 68,23 88,47 5,5‡ 125,45 162,21 3,2 125,45 147,92219,1 12,9 121,14 165,94 9,8 121,14 165,94 9,1‡ 262,83 331,11 4,6 224,31 266,40273,0 23,1 248,41 357,52 10,9 206,68 275,71 13,6(sw) 360,73 474,51 5,4(sw) 336,61 405,40323,9 30,4 361,55 483,70 20,4 249,95 334,21 18,1(sw) 487,79 612,79 13,3(sw) 487,79 509,36355,6 61,7 825,58 1047,18 29,5 612,37 1527,87 20,9(sw) 793,91 960,29 14,5(sw) 736,38 930,20406,4 77,6 1049,61 1360,35 39,9 807,99 + 26,3(sw) 872,39 945,33 19,1(sw) 858,83 1050,16457,0 103,4 1332,35 1726,73 49,0 1000,66 1307,63 29,5(sw) 1148,68 1309,56 24,1(sw) 899,10 1010,04508,0 135,2 1756,31 2276,21 62,6 1282,43 1717,44 36,0(sw) 1249,35 1492,75 29,5(sw) 934,06 1037,23610,0 198,7 2543,41 3296,29 100,2 2057,22 2732,85 63,5(sw) 1678,71 1913,54 27,2(sw) 1618,75 1817,95


SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LIN

GS

AN

D F

ITT

ING

S1

Elbows AGS

+ Quoted on application.NOTE: AGS products in sizes 355,6 - 610,0mm are designed for the new Advanced Groove System (AGS), which uses deeper and wider, wedge-shaped grooves compared to the traditional Victaulic grooved system.

Long Radius Elbows 1¹/₂ D

+ Quoted on application.NOTE: AGS products in sizes 355,6 - 610,0mm are designed for the new Advanced Groove System (AGS), which uses deeper and wider, wedge-shaped grooves compared to the traditional Victaulic grooved system.

Elbows AGS

No. W10, No. W11, No. W12, No. W13

ULCUL¨

FMNo. W10 No. W11 No. W12 No. W13

O.D.[mm]

90˚ ELBOW No. W10 45˚ ELBOW No. W11 22¹˚ ELBOW No. W12 11¹⁄₄˚ ELBOW No. W13Wgt.Each[kg]




Price Each

Paint. Galv. Paint. Galv. Paint. Galv. Paint. Galv.355,6 63,3 €825,58 €1047,18 32,1 €612,37 €1527,87 20,9 €793,91 €960,29 14,5 €736,38 €930,20406,4 83,0 1049,61 1360,35 42,5 807,99 1417,76 26,3 872,39 945,33 19,1 858,83 1050,16457,0 111,8 1332,35 1726,73 56,9 1000,66 1307,63 29,5 1148,68 1309,56 24,1 899,10 1010,04508,0 138,8 1756,31 2276,21 70,9 1282,43 1717,44 36,0 1249,35 1492,75 29,5 934,06 1037,23610,0 220,5 2543,41 3296,29 105,3 2057,22 2732,85 63,5 1678,71 1913,54 27,2 1618,75 1817,95

Long Radius Elbows 1¹/₂ D*

No. 100, No. 110

No. 100

No. 110

O.D.[mm]

90˚ LONG RAD. ELBOW No. 100 45˚ LONG RAD. ELBOW No. 110

Wgt.Each[kg]


Price EachPainted Galv. Painted Galv.

60,3 1,1 €32,51 €31,65 0,8 €24,59 €30,5573,0 + + + + + +88,9 2,7 48,41 64,43 2,2 42,03 54,13

114,3 5,6 72,62 98,65 3,3 51,27 69,26141,3 + + + + + +165,1 13,2 + + 8,6 + +168,3 13,8 212,61 283,24 7,9 152,76 198,12219,1 29,9 510,11 660,68 16,3 265,49 350,00273,0 48,5 846,25 1099,53 25,9 528,01 681,84323,9 70,8 1211,42 1465,32 40,8 830,34 1072,23355,6# 74,4 (s) 1306,16 1716,67 37,2 (s) 884,87 1122,54406,4# 95,3 (s) 1696,95 2222,10 45,4 (s) 1100,99 1383,79457,0# 123,8 (s) 2153,86 2717,74 61,2 (s) 1290,50 1540,49508,0# 155,6 (s) 2839,28 3567,10 78,9 (s) 1695,67 2029,20610,0# 234,1 (s) 4111,75 5182,43 113,9 (s) 2604,29 3213,52


24

SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LING

S A

ND

FIT

TIN

GS

1

AGS Long Radius Elbows 1¹/₂ D

+ Quoted on application.NOTE: AGS products in sizes 355,6 - 610,0mm are designed for the new Advanced Groove System (AGS), which uses deeper and wider, wedge-shaped grooves compared to the traditional Victaulic grooved system.Tee, Cross and Wye

+ Quoted on application.Victaulic® fittings listed above are made of ductile iron except those marked (sw) segmentally welded steel.§ See box packing schedule below.

AGS Long Radius Elbows 1¹/₂D*

No. W100, No. W110

No. W100

No. W110

VICTA

ULIC

No.W10

0

VIC

TAU

LIC

No.

W11

0

O.D.[mm]

90˚ LONG RAD. ELBOW No. W100 45˚ LONG RAD. ELBOW No. W110

Wgt.Each[kg]



355,6 69,9 €1306,16 €1716,67 35,0 €884,87 €1122,54406,4 91,2 1696,95 2222,10 45,6 1100,99 1383,79457,0 116,1 2153,86 2717,74 58,0 1290,50 1540,49508,0 143,8 2839,28 3567,10 71,9 1695,67 2029,20610,0 207,7 4111,75 5182,43 103,9 2604,29 3213,52

Tees, Crossand WyeNo. 20, No. 29M, No. 35, No. 33

O.D.[mm]

Wgt.Each[kg]

TeeNo. 20§

Tee with ThreadedBranch No. 29M

Steel CrossNo. 35

Steel 90 True YNo. 33

Price Each Price Each Wgt.Each[kg]


Price Each

Painted Galv. Painted Galv. Painted Galv. Painted Galv.26,9 0,3 €17,75 €21,19 + €28,47 0,4 €99,66 €109,58 – - -

33,7 0,5 18,18 22,68 + 28,47 0,6 112,96 114,00 0,5 €122,01 €137,9442,4 0,7 12,91 14,96 + 28,47 1,0 112,96 123,13 0,7 122,01 137,9448,3 0,9 13,76 15,73 + 28,47 1,1 112,96 123,13 0,8 122,01 137,9460,3 1,3 15,29 19,33 €47,94 56,93 1,7 58,04 71,40 1,1 122,01 148,9873,0 2,2 22,20 27,16 47,95 56,93 2,8 58,04 71,40 2,0 122,01 137,9476,1 3,3 22,20 27,16 + + - - - - - -

88,9 2,8 29,19 35,72 + 87,75 4,8 104,39 132,02 2,8 145,87 177,78101,6 3,6 (sw) 181,27 207,51 + + 5,2 + + 4,4 + +

108,0 5,7 39,59 48,76 102,75 + - - - - - -

114,3 5,7 39,59 48,76 102,75 125,45 7,2 176,99 220,67 4,5 191,03 236,32127,0 6,8 (sw) + + + + 8,4 + + - - -

133,0 8,1 87,62 108,06 + + - - - - - -

139,7 8,1 87,62 108,06 + + - - - - - -

141,3 8,1 87,62 108,06 246,49 286,27 9,1 354,87 407,24 6,8 273,86 313,33159,0 12,4 94,61 122,78 + + - - - - - -

165,1 12,3 94,61 122,78 + + - + + - - -

168,3 12,3 94,61 122,78 + + 12,7 465,30 571,53 10,1 338,87 423,71219,1 21,6 253,22 380,59 + + 21,8 612,81 767,74 16,3 488,07 570,65273,0 40,8 424,91 557,10 530,36 + 55,1 1025,62 1302,77 31,7 842,41 981,42323,9 56,2 592,39 766,21 + + 49,9 1480,05 1753,74 36,3 930,66 1119,60355,6 65,8 1017,88 1319,17 - - 89,8 + + 60,9 1093,08 1304,31406,4 65,8 1303,05 1688,77 - - 113,4 + + 75,8 + +

457,0 116,1 1780,98 2324,89 - - 140,6 + + 106,1 + +

508,0 153,8 2552,16 3275,90 - - 205,0 + + 127,5 + +

610,0 214,5 3891,43 5110,17 - - 360,6 + + 237,2 + +


SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LIN

GS

AN

D F

ITT

ING

S1

AGS Tee, Cross, Wye and Cap

+ Quoted on application.(sw) Made of segmentally welded steel.NOTE: AGS products in sizes 355,6 - 610,0mm are designed for the new Advanced Groove System (AGS), which uses deeper and wider, wedge-shaped grooves compared to the traditional Victaulic grooved system.

Box Packing Schedule

‡ Victaulic reserves the right to change box quantities.

AGS Tee, Cross, Wye and Cap

No. W20, No. W29M, No. W35, No. W33

VICTAULICNo.W20

VICTAULICNo.W35

VICTA

ULIC

No.W33

VIC

TAU

LIC

No.

W60

O.D.[mm]

TeeNo. W20§ Cross No. W35 (sw)

Steel 90 True YNo. W33 Cap No. W60

Wgt.Each[kg]




Price Each

Painted Galv. Painted Galv. Painted Galv. Painted Galv.355,6 77,1 €1017,88 €1319,17 76,2 €1853,09 €2223,71 51,7 + + 15,9 €951,81 €1161,53406,6 90,7 1303,05 1688,77 98,0 2654,17 3185,01 65,3 + + 20,0 959,13 1170,51457,0 144,2 1780,98 2324,89 126,1 3244,60 3893,52 83,9 + + 26,3 1207,32 1473,38508,0 167,4 2552,16 3275,90 157,9 3867,30 4640,76 98,0 + + 35,8 1359,12 1658,70610,0 254,0 3891,43 5110,17 221,4 5686,34 6823,61 155,6 + + 47,6 1877,07 2290,74

Box Packing ScheduleNo. 10, No. 11, No. 20

No. 20 No. 10

No. 11

ULCUL¨

FM

O.D.[mm]

90˚ ElbowNo. 10

45˚ ElbowNo. 11

TeeNo. 20

Full Box Full Box Full Box

Qty.‡Wgt.[kg] Qty.‡

Wgt.[kg] Qty.‡

Wgt.[kg]

33,7 50 15 50 15 50 2542,4 500 250 100 40 50 3548,3 500 250 100 40 50 4560,3 500 400 100 60 50 7073,0 100 150 100 100 50 10076,1 100 170 100 150 50 12088,9 100 200 100 140 50 150

108,0 100 500 25 50 50 350114,3 150 480 50 135 50 270133,0 100 530 25 95 30 204139,7 100 530 25 95 30 243141,3 100 530 25 95 30 243159,0 60 504 25 98 30 369165,1 60 420 25 110 30 300168,3 60 468 25 123 30 51219,1 30 408 20 186 15 324273,0 16 459 20 340 10 449323,9 9 302 12 364 6 362


26

SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LING

S A

ND

FIT

TIN

GS

1

Reducing Base Support Elbows

+ Quoted on application.Adapter Nipples

+ Quoted on application.Unless otherwise specified, Adapter Nipples for pipe sizes 168,3mm and smaller are made from Schedule 40 pipe; for sizes 219,1mm and larger, from Schedule 30 pipe. 114,3 - 323,9mm diameters require 219,1mm minimum.Special lengths not shown, heavier wall thickness, electroplated and galvanized nipples are priced on application.Add 30% to list price for galvanized nipples.Add 50% to list price for extra heavy nipples.AGS Adapter Nipples

+ Quoted on application.Please specify nipple style number when ordering.Unless otherwise specified, adapter nipples are constructed using standard wall pipe.* Other lengths available. Contact Victaulic for details.NOTE: AGS products in sizes 355,6 - 610,0mm are designed for the new Advanced Groove System (AGS), which uses deeper and wider, wedge-shaped grooves compared to the traditional Victaulic grooved system.

Reducing Base Support ElbowsNo. R-10G, No. 11, No. R-10F

No. R-10GGrooved xGrooved

No. R-10FGrooved xFlanged

O.D.[mm]

Inlet x Outlet

Grooved x Grooved No. R-10G Grooved x Flanged No. R-10F

Wgt.Each[kg]



168,3 x 114,3 8,6 + + 15,0 + +168,3 x 141,3 10,4 + + 17,2 + +219,1 x 168,3 15,0 + + 23,6 + +273,0 x 219,1 27,7 + + 39,9 + +

Adapter NipplesNo. 40, No. 42, No. 43

No. 40Grooved x Threaded

No. 42Grooved x Beveled

No. 43Grooved x Grooved

O.D.[mm]

StandardLength[mm]

Adapter Nipples Price Each

No. 40 No. 42 No. 4326,9 76,2 €6,83 - €6,8333,7 76,2 8,72 €8,72 8,7242,4 101,6 8,72 8,72 8,7348,3 101,6 7,95 7,95 7,9560,3 101,6 12,22 12,22 12,2273,0 101,6 19,19 19,19 19,1976,1 101,6 19,19 19,19 19,1988,9 101,6 24,51 24,51 24,51

114,3 152,4 42,88 42,88 42,88139,7 152,4 - 67,86 +141,3 152,4 - 68,94 68,94159,0 152,4 - 76,02 +168,3 152,4 91,41 91,41 91,41219,1 152,4 - 124,18 124,19273,0 203,2 - 196,21 196,21323,9 203,2 - 234,52 234,52355,6 203,2 - 283,47 +

AGS Adapter Nipples

No. W42, No. W43, No. W49

No. W42 No. W43 No. W49

O.D.[mm]

Wgt. Each [kg] Length* [mm]

AGS Adapter Nipples Price EachNo. W42 No. W43 No. W49

355,6 16,3 203 €283,47 €267,65 €301,51406,4 19,1 203 405,09 388,32 424,56457,0 21,3 203 433,76 414,22 453,30508,0 23,6 203 480,66 374,51 488,74610,0 28,6 203 699,15 708,68 754,82


SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LIN

GS

AN

D F

ITT

ING

S1

Female Threaded Adapter

Available with British Pipe Threads (BSP). Contact Victaulic for details.+ Quoted on application.Adapter Elbows

Available with British Pipe Threads (BSP). Contact Victaulic for details.+ Quoted on application.

Female Threaded Adapter

No. 80

O.D.[mm]

Wgt. Each[kg]

Price EachO.D.[mm]

Wgt. Each[kg]

Price Each

Painted Galv. Painted Galv.26,9 0,3 €40,03 €44,95 73,0 0,7 €68,64 €77,0333,7 0,3 40,03 48,54 76,1 0,7 + 94,3242,4 0,3 40,03 44,95 88,9 1,3 72,55 94,3248,3 0,5 44,92 55,75 114,3 2,0 72,55 94,3260,3 0,6 44,92 58,22

Adapter ElbowsNo. 18, No. 19

No. 18 No. 19

O.D.[mm]

90˚ Adapter Elbow No. 18 45˚ Adapter Elbow No. 19

Wgt.Each[kg]



26,9 0,2 €31,43 €32,57 0,2 + +33,7 0,2 33,82 37,90 0,3 + +42,4 0,4 39,73 41,94 0,3 + +48,3 0,5 42,91 45,26 0,4 + +60,3 1,1 49,00 57,94 0,9 €63,38 €76,4973,0 1,4 52,39 61,99 1,0 + +88,9 2,6 63,04 76,23 2,3 + +

101,6 3,4 + + 4,0 + +114,3 5,8 132,45 143,95 3,8 + +168,3 8,0 197,50 219,41 5,8 + +


28

SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LING

S A

ND

FIT

TIN

GS

1

Reducing Tee

Reducing TeeNo. 25

No. 25

O.D.[mm] Reducing Tee No. 25

Run BranchWgt. Each

[kg] Painted Galv.33,7 x 33,7 x 26,9 0,4 + +42,4 x 42,4 x 33,7 0,6 + +48,3 x 48,3 x 26,9 0,7 + +

x 33,7 0,7 + +x 42,4 0,8 + +

60,3 x 60,3 x 26,9 (d) 1,1 €50,24 €52,78x 33,7 (d) 1,2 50,24 52,78

x 42,4 0,8 43,46 +x 48,3 1,4 43,46 46,52

73,0 x 73,0 x 26,9 1,7 65,43 93,07x 33,7 1,7 65,43 93,07x 42.4 1,8 65,43 93,07x 48,3 1,8 49,63 62,24x 60,3 2,0 49,63 62,24

76,1 x 76,1 x 60,3 2,0 49,63 62,2588,9 x 88,9 x 26,9 2,5 45,65 66,78

x 33,7 (d) 2,8 52,96 66,78x 42,4 3,0 52,96 66,78x 48,3 3,0 52,96 66,78x 60,3 2,8 45,65 57,15x 73,0 2,9 45,65 57,15x 76,1 2,9 45,65 57,15

114,3 x 114,3 x 26,9 3,6 62,12 72,45x 33,7 (d) 3,5 72,06 90,76

x 42,4 4,4 72,06 90,76x 48,3 4,6 72,06 90,76

x 60,3 (d) 5,1 72,06 90,76x 73,0 (d) 5,2 62,13 78,25

x 76,1 5,2 62,13 78,25x 88,9 (d) 5,3 62,13 78,25

139,7 x 139,7 x 76,1 5,3 124,11 169,35x 88,9 5,7 114,91 145,99

x 114,3 6,2 114,91 114,91141,3 x 141,3 x 33,7 6,4 124,11 162,51

x 48,3 6,5 180,54 162,51x 60,3 6,6 180,54 203,61x 73,0 6,6 180,54 203,61x 76,1 6,8 138,39 162,51x 88,9 7,5 138,39 175,52

x 114,3 7,6 138,39 175,52165,1 x 165,1 x 60,3 10,9 157,95 207,17

x 88,9 10,9 157,95 207,17x 114,3 (d) 11,3 146,25 181,72

168,3 x 168,3 x 33,7 10,4 146,25 210,80x 48,3 10,9 157,95 210,80

x 60,3 (d) 9,8 157,95 210,80x 73,0 (d) 9,7 157,95 210,80

x 76,1 9,7 + +x 88,9 (d) 12,0 157,95 210,80

x 114,3 (d) 11,3 146,25 181,72x 139,7 11,3 + 181,72x 141,3 10,5 146,25 181,72

219,1 x 219,1 x 48,3 14,9 + +x 60,3 15,2 448,44 627,83x 73,0 17,6 + +x 76,1 17,6 + +x 88,9 15,2 448,44 627,83


SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LIN

GS

AN

D F

ITT

ING

S1

Victaulic® fittings listed above are made of segmentally welded steel except those marked (d) ductile iron.+ Quoted on application.

219,1 x 219,1 x 114,3 (d) 19,0 €448,44 €627,83x 141,3 15,4 415,22 543,59x 165,1 19,2 415,22 543,59

x 168,3 (d) 19,2 415,22 543,59273,0 x 273,0 x 48,3 28,1 + +

x 60,3 28,1 484,83 612,18x 73,0 28,3 484,83 +x 76,1 28,3 + +x 88,9 27,2 484,83 612,18

x 114,3 27,7 484,83 612,18x 141,3 23,6 484,83 612,18x 168,3 26,8 457,38 554,18x 219,1 29,4 457,38 554,18

323,9 x 323,9 x 33,7 34,9 + +x 60,3 36,2 + +x 73,0 35,3 + +x 76,1 35,3 + +x 88,9 36,3 700,32 1023,41

x 114,3 37,2 700,32 1023,41x 141,3 34,0 700,32 1023,41x 168,3 34,0 700,32 1023,41x 219,1 36,3 660,68 891,54x 273,0 38,1 660,68 891,54

355,6 x 355,6 x 114,3 46,3 887,58 +x 168,3 49,0 887,58 1173,69x 219,1 50,8 887,58 1173,69x 273,0 54,4 837,33 1087,16x 323,9 58,5 837,33 1087,16

406,4 x 406,4 x 88,9 65,8 1162,02 1486,97x 114,3 65,8 1162,02 1486,97x 168,3 67,8 1162,02 1486,97x 219,1 67,8 1162,02 1486,97x 273,0 69,9 1162,02 1486,97x 323,9 69,9 1098,33 1376,82x 355,6 71,3 1098,33 +

457,0 x 457,0 x 114,3 87,9 + +x 168,3 92,0 1501,59 1850,37x 219,1 94,3 1501,59 1850,37x 273,0 96,2 1501,59 1850,37x 323,9 101,0 1501,59 1850,37x 355,6 101,4 1419,27 1713,31x 406,4 112,3 1419,27 1713,31

508,0 x 508,0 x 168,3 108,8 + +x 219,1 110,6 2312,98 2806,52x 273,0 116,1 2312,98 +x 323,9 119,7 2312,98 +x 355,6 124,7 2312,98 2806,52x 406,4 130,9 2186,18 2598,63x 457,0 134,7 2186,18 2598,63

610,0 x 610,0 x 219,1 154,2 2874,42 3509,95x 273,0 156,0 2874,42 3509,95x 323,9 160,0 2874,42 3509,95x 355,6 163,3 2874,42 3509,95x 406,4 171,5 2874,42 3509,95x 457,0 172,4 2717,14 3342,81x 508,0 169,2 2717,14 3342,81

O.D.[mm] Reducing Tee No. 25

Run BranchWgt. Each

[kg] Painted Galv.


30

SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LING

S A

ND

FIT

TIN

GS

1

AGS Reducing Tee

+ Quoted on application.(sw) Made of segmentally welded steel.NOTE: AGS products in sizes 355,6 - 610,0mm are designed for the new Advanced Groove System (AGS), which uses deeper and wider, wedge-shaped grooves compared to the traditional Victaulic grooved system.

AGS Reducing Tee

No. W25

No. W25

O.D.[mm] Reducing Tee No. W25

Run BranchWgt. Each

[kg] Painted Galv.355,6 168,3 64,4 €887,58 €1173,69355,6 219,1 64,9 887,58 1173,69355,6 219,1 65,3 837,33 1087,16355,6 323,9 66,7 837,33 1087,16406,4 168,3 79,8 1162,02 1486,97406,4 219,1 83,9 1162,02 1486,97406,4 273,0 88,5 1162,02 1486,97406,4 323,9 92,5 1098,33 1376,82406,4 355,6 95,3 1098,33 1376,82457,0 219,1 104,8 + +457,0 273,0 110,7 + +457,0 323,9 115,2 1501,59 +457,0 355,6 118,8 + +457,0 406,4 122,0 + +508,0 219,1 127,9 + +508,0 273,0 133,8 + +508,0 323,9 139,7 + +508,0 355,6 143,3 + +508,0 406,4 149,2 + +508,0 457,0 155,1 + +610,0 219,1 172,8 + +610,0 273,0 178,7 + +610,0 323,9 185,5 + +610,0 355,6 190,1 + +610,0 406,4 196,4 + +610,0 457,0 205,5 + +610,0 508,0 214,6 + +


SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LIN

GS

AN

D F

ITT

ING

S1

Reducing Tee with Threaded Branch

+ Quoted on application.Victaulic® fittings listed above are made of segmentally welded steel except those marked (d) ductile iron.˚ Pitcher tee design

Reducing Tee withThreaded BranchNo. 29T

No. 29T

Size[mm] Reducing Tee No. 29T

Run x Run BranchWgt. Each

[kg] Painted Galv.60,3 x 60,3 x 26,9 1,1 €38,27 €43,91

x 33,7 (d) 1,2 38,27 43,91x 42,4 (d) 1,3 + +x 48,3 (d) 1,4 38,27 43,91

73,0 x 73,0 x 33,7 1,7 74,49 +x 48,3 (d) 1,8 74,49 +x 60,3 2,0 74,49 +

88,9 x 88,9 x 26,9 + + +x 33,7 2,8 74,49 95,07x 48,3 (d) 3,0 + 88,03x 60,3 (d) 2,8 74,49 95,07x 73,0 (d) 2,9 126,48 141,49

114,3 x 114,3 x 26,9 + 130,37 134,99x 33,7 3,5 93,08 116,82x 48,3 + 134,05 157,21x 60,3 (d) 5,1 93,08 118,33x 73,0 (d) 5,2 93,08 112,88x 76,1 + + +x 88,9 (d) 5,3 93,08 113,41

141,3 x 141,3 x 60,3 (d) 6,6 153,01 180,92x 88,9 (d) 7,5 166,48 196,91x 114,3 (d) 7,6 180,54 214,21

165,1 x 165,1 x 88,9 10,9 + +x 114,3 11,3 + +

168,3 x 168,3 x 60,3 (d) 9,8 234,19 281,94x 73,0 (d) 9,7 202,00 281,94x 76,1 + + +x 88,9 (d) 12,0 234,19 281,94x 114,3 (d) 11,3 234,19 281,94x 141,3 10,5 234,19 281,94

219,1 x 219,1 x 60,3 15,2 287,17 346,74x 88,9 15,2 287,17 346,74x 114,3 (d) 19,0 407,44 500,91x 141,3 15,4 407,44 500,91x 165,1 19,2 + +x 168,3 (d) 19,2 407,44 500,91

273,0 x 273,0 x 60,3 28,1 513,79 625,02x 88,9 27,2 513,79 625,02x 114,3 27,7 513,79 625,02x 141,3 23,6 513,79 625,02x 168,3 26,8 513,79 625,02

323,9 x 323,9 x 88,9 36,3 758,25 865,78x 114,3 37,2 758,25 865,78x 141,3 34,0 758,25 865,78x 168,3 34,0 758,25 865,78


32

SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LING

S A

ND

FIT

TIN

GS

1

Reducing Tee with Female Threaded Branch

+ Quoted on application.Victaulic® fittings listed above are made of segmentally welded steel except those marked (d) ductile iron.˚ Pitcher tee design

O.D.[mm]

Reducing Tee No. 29Twith Female Threaded Branch

Run x Run BranchWgt. Each

[kg] Painted Galv.60,3 x 60,3 x 33,7 + - €73,29

x 42,4 + - 73,29x 48,3 + - 73,29

76,1 x 76,1 x 33,7 + - 97,74x 42,4 + - 97,74x 48,3 + - 97,74x 60,3 + - 97,74

88,9 x 88,9 x 33,7 + - 113,79x 42,4 + - 113,79x 48,3 + - 115,18x 60,3 + - 115,18

114,3 x 114,3 x 33,7 + - 134,75x 42,4 + - 134,75x 48,3 + - 136,14x 60,3 + - 136,14x 76,1˚ 4,6 - 129,73

139,7 x 139,7 x 33,7 + - +x 42,4 + - +x 48,3 + - +x 60,3 + - +

168,3 x 168,3 x 33,7 + - +x 42,4 + - +x 48,3 + - +x 60,3 + - 304,47


SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LIN

GS

AN

D F

ITT

ING

S1

Reducers

v

ReducersNo. 50, No. 51

No. 50

No. 51

O.D.[mm]

Concentric ReducerNo. 50

Eccentric ReducerNo. 51

Wgt.Each[kg] Painted Galv.


42,4 x 26,9 0,8 + + - - -42,4 x 33,7 0,4 €56,30 €26,90 - - -48,3 x 26,9 0,4 56,30 70,17 - - -48,3 x 33,7 0,4 (d) 23,61 26,90 2,0 €65,39 +48,3 x 42,4 0,4 56,30 70,62 2,0 65,39 +60,3 x 26,9 0,4 (d) 28,15 35,30 0,9 + +60,3 x 33,7 0,3 (d) 28,15 35,30 1,0 95,30 €100,6360,3 x 42,4 0,5 (d) 23,61 29,42 2,1 77,22 93,1860,3 x 48,3 0,5 (d) 23,61 29,42 2,1 77,22 93,1873,0 x 26,9 0,7 + + 2,1 + 290,7373,0 x 33,7 1,6 136,65 142,77 1,5 278,20 +73,0 x 42,4 1,6 136,65 142,77 1,6 + +73,0 x 48,3 1,6 28,67 30,98 1,6 99,90 106,4673,0 x 60,3 1,8 (d) 28,67 30,98 0,7 (d) 99,90 106,4676,1 x 26,9 0,7 + + 2,1 + +76,1 x 33,7 1,6 43,52 50,59 1,5 + +76,1 x 42,4 1,6 43,52 50,59 1,6 + +76,1 x 48,3 1,6 28,67 30,98 1,6 + +76,1 x 60,3 1,8 28,67 30,98 0,7 + 242,9688,9 x 33,7 0,6 45,59 37,09 2,2 305,26 230,0688,9 x 42,4 0,6 45,59 37,09 - 305,26 +88,9 x 48,3 0,6 45,59 37,09 2,2 305,26 230,0688,9 x 60,3 0,7 (d) 27,24 34,34 1,0 (d) 50,56 55,3288,9 x 73,0 0,7 (d) 27,24 34,34 1,0 (d) 50,56 55,3288,9 x 76,1 0,8 (d) 27,24 34,34 - 50,56 +

101,6 x 88,9 0,9 (d) 27,31 3,2 + +114,3 x 33,7 1,1 (d) 29,49 36,72 2,9114,3 x 48,3 1,3 29,49 36,72 3,7 58,07 63,66114,3 x 60,3 1,1 (d) 29,49 36,72 1,5 (d) 58,07 63,66114,3 x 73,0 1,2 (d) 27,31 32,37 1,5 (d) 53,76 58,95114,3 x 76,1 1,2 27,31 32,37 - + 58,95114,3 x 88,9 1,2 (d) 27,31 32,37 1,6 (d) 53,76 58,95

114,3 x 101,6 1,3 27,31 3,6 + +139,7 x 76,1 + + + + - -139,7 x 88,9 1,91 70,48 72,69 + 65,15 +

139,7 x 114,3 1,95 70,48 72,69 + 65,15 82,72141,3 x 60,3 5,0 284,69 306,94 4,9 + +141,3 x 73,0 5,0 284,69 306,94 4,9 348,72 +141,3 x 88,9 2,2 (d) 70,48 72,69 5,0 75,77 82,72

141,3 x 114,3 1,9 70,48 72,69 2,7 (d) 75,77 82,72165,1 x 60,3 3,0 65,93 72,85 3,0 + +165,1 x 76,1 + 65,93 - - - -165,1 x 88,9 2,8 65,93 72,85 3,0 + +

165,1 x 114,3 3,0 61,05 67,45 3,0 84,38 +165,1 x 139,7 - - 67,45 + - -165,1 x 141,3 3,0 61,05 67,45 3,0 + +168,3 x 33,7 2,3 67,02 73,87 6,6 + +168,3 x 48,3 2,5 + + 6,6 + +168,3 x 60,3 3,0 67,02 73,87 6,6 + 89,44168,3 x 73,0 6,4 67,02 73,87 6,4 83,35 89,44168,3 x 76,1 4,2 + + 3,1 (d) + +168,3 x 88,9 2,9 67,02 73,87 3,1 (d) 83,35 89,44

168,3 x 114,3 2,9 62,06 68,76 3,4 (d) 77,18 84,38168,3 x 139,7 2,9 62,06 68,76 3,4 (d) - -168,3 x 141,3 2,9 62,06 68,76 3,9 (d) 77,18 84,38219,1 x 73,0 3,6 147,57 + 11,8 687,66 +


34

SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LING

S A

ND

FIT

TIN

GS

1
+Quoted on application.Victaulic® fittings listed above are segmentally welded steel except those marked (d) ductile iron.
219,1 x 76,1 4,2 + + 10,8 + +219,1 x 88,9 4,2 €147,57 €167,43 10,0 €687,66 €544,06

219,1 x 114,3 4,8 147,57 167,43 10,4 687,66 544,06219,1 x 141,3 5,2 (d) 136,64 157,95 10,4 150,32 166,75219,1 x 165,1 5,4 (d) 136,64 157,95 - + +219,1 x 168,3 5,4 (d) 136,64 157,95 10,4 (d) 150,32 166,75273,0 x 88,9 8,9 + + 14,5 + +

273,0 x 114,3 8,9 245,29 291,21 14,5 808,96 1008,82273,0 x 141,3 9,1 245,29 + 16,7 808,96 881,23273,0 x 168,3 9,1 227,13 274,72 - 763,17 951,72273,0 x 219,1 10,0 227,13 274,72 18,3 763,17 951,72323,9 x 114,3 20,0 317,70 349,70 21,8 + +323,9 x 168,3 11,2 317,70 349,70 22,7 1227,05 1352,05323,9 x 219,1 23,6 294,17 323,79 24,3 1026,63 1275,52323,9 x 273,0 17,2 294,17 323,79 25,9 1026,63 1275,52355,6 x 168,3 29,5 1387,77 + 27,2 2038,02 +355,6 x 219,1 29,5 1387,77 1307,03 27,2 2038,02 +355,6 x 273,0 29,5 1027,93 1276,71 29,5 1460,28 +355,6 x 323,9 33,0 1027,93 1276,71 30,0 1460,28 +406,4 x 219,1 33,1 1886,15 1927,49 31,8 2914,67 3226,47406,4 x 273,0 47,6 1886,15 1927,49 48,1 2914,67 3226,47406,4 x 323,0 47,6 1401,71 1740,97 33,1 2661,82 2757,41406,4 x 355,6 33,1 1401,71 1740,97 34,0 2661,82 +457,0 x 273,0 54,0 2597,44 + + 3613,26 3653,31457,0 x 323,9 41,3 2597,44 2459,34 43,1 3613,26 3653,31457,0 x 355,6 41,3 1775,53 + 41,3 3408,02 3653,31457,0 x 406,4 41,3 1775,53 2205,25 79,4 + 3945,59508,0 x 323,9 54,4 2672,70 2506,98 81,6 + +508,0 x 355,6 67,6 2672,70 + 56,7 + +508,0 x 406,4 54,4 1868,97 + 69,4 + +508,0 x 457,0 61,7 1868,97 2321,28 98,7 + +610,0 x 273,0 65,8 + + + + +610,0 x 323,9 68,0 5046,30 + 67,1 + +610,0 x 355,6 73,0 + + + + +610,0 x 406,0 73,5 5046,30 + 70,3 + +610,0 x 457,0 73,5 4672,51 + 73,5 + +610,0 x 508,0 68,5 4672,51 + 86,2 + +

O.D.[mm]

Concentric ReducerNo. 50

Eccentric ReducerNo. 51




SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LIN

GS

AN

D F

ITT

ING

S1

AGS Reducers

+Quoted on application.Concentric and eccentric reducers 355,6-610,0mm are steel and supplied with roll grooves.NOTE: AGS products in sizes 355,6 - 610,0mm are designed for the new Advanced Groove System (AGS), which uses deeper and wider, wedge-shaped grooves compared to the traditional Victaulic grooved system.Swaged Nipples

+Quoted on applicationNo. 53 grooved x grooved; No. 54 grooved x threaded;No. 55 threaded x grooved.

AGS Reducers

No. W50, No. W51

No. W50

No. W51

VICTAULICNo.W50

VICTAULICNo.W51

O.D.[mm]

Concentric ReducerNo. W50

Eccentric ReducerNo. W51

Run BranchWgt.Each

[kg]Price Each Wgt.Each

[kg]Price Each

Painted Galv. Painted Galv.355,6 273,0 27,4 €1027,93 €1276,71 27,4 + +355,6 323,9 28,8 1027,93 1276,71 28,8 + +406,4 323,9 34,3 1401,71 1740,97 34,3 + +406,4 355,6 35,2 1401,71 1740,97 35,2 + +457,0 355,6 41,2 1775,53 2205,25 41,2 + +457,0 406,4 42,6 1775,53 2205,25 42,6 + +508,0 406,4 62,6 1868,97 2321,28 62,6 + +508,0 457,0 64,4 1868,97 2321,28 64,4 + +610,0 457,0 73,9 4672,51 4672,51 73,9 + +610,0 508,0 75,8 4672,51 4672,51 75,8 + +

Swaged NipplesNo. 53, No. 54, No. 55

No. 53

No. 54

No. 55

O.D.[mm]

Wgt.Each[kg]

Steel SwagedNipples

No. 53, 54, 55 Plated

Price EachO.D.[mm]

Wgt.Each[kg]

Steel SwagedNipples

No. 53, 54, 55 Plated

Price Each60,3 x 33,7 0,9 + 114,3 x 73,0 3,4 +60,3 x 42,4 1,9 + 114,3 x 88,9 3,4 +60,3 x 48,3 0,9 + 114,3 x 101,6 3,4 +73,0 x 33,7 1,4 + 141,3 x 60,3 5,2 +73,0 x 42,4 1,4 + 141,3 x 88,9 5,1 +73,0 x 48,3 1,4 + 141,3 x 114,3 5,2 +73,0 x 60,3 1,4 + 168,3 x 33,7 7,7 +88,9 x 33,7 2,0 + 168,3 x 42,4 7,7 +88,9 x 42,4 2,0 + 168,3 x 48,3 7,8 +88,9 x 48,3 2,0 + 168,3 x 60,3 7,9 +88,9 x 60,3 2,0 + 168,3 x 73,0 7,9 +88,9 x 73,0 2,0 + 168,3 x 88,9 7,9 +

101,6 x 88,9 3,1 + 168,3 x 101,6 7,9 +114,3 x 33,7 3,4 + 168,3 x 114,3 7,9 +114,3 x 42,4 3,4 + 168,3 x 127,0 7,9 +114,3 x 48,3 3,4 + 168,3 x 141,0 7,9 +114,3 x 60,3 3,4 +


36

SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LING

S A

ND

FIT

TIN

GS

1

Reducer Threaded Small End

+ Quoted on application.(168,3 x 114,3 mm) available in swaged nipples.Available with British Pipe Threads (BSP). Contact Victaulic for details.Lateral

+ Quoted on application.Victaulic® fitting listed above is made of segmentally welded steel.

ReducerThreadedSmall EndNo. 52

No. 52

O.D.[mm]

Inlet x OutletWgt.Each

[kg]

Price Each

Painted Galv.48,3 x 33,7 0,4 €21,84 €26,2560,3 x 26,9 0,4 22,87 28,0160,3 x 33,7 0,5 22,87 28,0160,3 x 42,4 0,5 24,51 29,9460,3 x 48,3 0,5 24,51 29,9473,0 x 33,7 1,0 150,57 +73,0 x 42,4 1,2 31,79 37,7673,0 x 48,3 1,3 31,79 37,7673,0 x 60,3 0,6 26,04 32,7388,9 x 26,9 1,2 + +88,9 x 33,7 0,6 56,18 72,7988,9 x 48,3 1,5 56,18 72,7988,9 x 60,3 0,7 56,18 72,7988,9 x 73,0 0,8 + +

114,3 x 33,7 1,0 59,07 76,55114,3 x 48,3 2,5 + +114,3 x 60,3 1,2 59,07 76,55114,3 x 73,0 1,2 59,07 76,55114,3 x 88,9 1,1 73,54 95,34

141,3 x 114,3 4,5 + +168,3 x 33,7 2,5 73,01 99,27168,3 x 60,3 2,5 73,01 99,27168,3 x 88,9 2,6 73,01 99,27

168,3 x 114,3 7,0 + +

LateralNo. 30

No. 30

O.D.[mm]

45˚ Lateral No. 30

Wgt. Each[kg]


26,9 0,5 €127,18 €148,2433,7 0,8 127,18 148,2442,4 1,1 127,18 160,1148,3 1,6 127,18 160,1160,3 2,1 127,18 160,1173,0 4,1 129,57 160,7888,9 5,3 140,44 182,00

101,6 8,1 + +114,3 10,1 220,76 278,78141,3 9,9 316,70 410,22165,1 19,8 + +168,3 19,8 510,24 629,64219,1 32,7 601,93 787,39273,0 47,6 849,63 1033,80323,9 74,8 933,95 1198,16355,6 125,2 1918,89 2308,30406,4 156,1 2397,30 2886,64457,0 194,6 2679,89 3265,58508,0 226,8 4065,10 4828,87610,0 324,3 6316,80 7640,87


SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LIN

GS

AN

D F

ITT

ING

S1

AGS Lateral

+ Quoted on application.(sw) Made of segmentally welded steel.NOTE: AGS products in sizes 355,6 - 610,0mm are designed for the new Advanced Groove System (AGS), which uses deeper and wider, wedge-shaped grooves compared to the traditional Victaulic grooved system.Cap

Caps are ductile iron.+ Quoted on application.Steel dish caps available in sizes 610mm quoted on application.

AGS Lateral

No. W30

No. W30

VIC

TAU

LIC

No.

W30

O.D.[mm]

45˚ Lateral No. W30 (sw)

Wgt. Each[kg]


355,6 125,2 + +406,4 156,1 + +457,0 194,6 + +508,0 226,8 + +610,0 324,3 + +

CapNo. 60

No. 60

O.D.[mm]

Cap No. 60

O.D.[mm]

Cap No. 60Wgt.Each[kg]


Price Each

Painted Galv. Painted Galv.26,9 0,1 €6,67 €8,03 141,3 2,1 €26,61 €33,0333,7 0,1 6,86 8,50 159,0 2,5 30,15 37,4242,4 0,2 6,86 8,50 165,1 2,8 30,15 37,4248,3 0,2 6,86 8,50 168,3 3,3 30,15 37,4260,3 0,3 6,86 8,50 219,1 5,9 59,52 73,9473,0 0,5 10,89 12,88 273,0 9,5 128,68 158,8776,1 0,5 10,89 13,45 323,9 16,2 216,12 266,8688,9 0,5 10,89 13,45 355,6 18,1 951,81 1161,53

101,6 1,1 + 13,63 406,4 20,4 959,13 1170,51114,3 1,1 12,64 15,71 457,0 26,3 1207,32 1473,38133,0 1,3 26,51 32,86 508,0 35,8 1359,12 1658,70139,7 1,5 26,61 33,03 610,0 38,0 1877,07 2290,74


38

SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LING

S A

ND

FIT

TIN

GS

1

Cap with Threaded Hole

Cap with Threaded HoleConcentric or EccentricNo. 60

Size[mm]

Cap No. 60 with Threaded HoleConcentric or Eccentric

Run Hole sizeWgt. Each

[kg] Painted Galv.42,4 21,3 + €18,75 €21,30

26,9 + 18,75 21,3033,7 + - 19,72

48,3 21,3 + 18,75 21,3026,9 + 18,75 21,3033,7 + - +

60,3 21,3 + 18,75 21,3026,9 + 18,75 21,3033,7 + 18,75 21,3042,4 + - 29,4248,3 + - 29,42

73,0 21,3 + + +26,9 + + +33,7 + 18,75 26,3242,4 + + +48,3 + 22,74 26,3260,3 + - +

76,1 21,3 + 22,73 26,3126,9 + 22,73 26,3133,7 + 22,73 26,3142,4 + 22,73 26,3148,3 + 22,73 26,3160,3 + - 35,72

88,9 21,3 + 22,73 26,3126,9 + 22,73 26,3133,7 + 22,73 26,3142,4 + 22,73 26,3148,3 + 22,73 26,3160,3 + - 26,3176,1 + - 40,25

108,0 21,3 + 24,55 26,4026,9 + 24,55 26,4033,7 + 24,55 26,4042,4 + 24,55 26,4048,3 + 24,55 28,5160,3 + 24,55 26,40

114,3 21,3 + 24,55 28,5126,9 + 24,55 28,5133,7 + 24,55 28,5142,4 + 24,55 28,5148,3 + 24,55 28,5160,3 + 24,55 28,5176,1 + - +88,9 + - 48,16

133,0 21,3 + 38,40 42,3626,9 + 38,40 45,7533,7 + 38,40 42,3642,4 + 38,40 42,3648,3 + 38,40 42,3660,3 + 38,40 45,75

139,7 21,3 + 38,52 45,9326,9 + 38,52 45,9333,7 + 38,52 45,9342,4 + 38,52 45,9348,3 + 38,52 45,9360,3 + 38,52 45,93


SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LIN

GS

AN

D F

ITT

ING

S1

End caps larger than 219,1 mm available; contact Victaulic for pricing.

141,3 21,3 + + +26,9 + + +33,7 + + +42,4 + + +48,3 + + +60,3 + + +

159,0 21,3 + €41,97 €46,5826,9 + 41,97 46,5833,7 + 41,97 46,5842,4 + 41,97 46,5848,3 + 41,97 46,5860,3 + 41,97 46,58

165,1 21,3 + 41,97 46,5826,9 + 41,97 46,5833,7 + 41,97 50,3142,4 + 41,97 50,3148,3 + 41,97 50,3160,3 + 41,97 50,31

168,3 21,3 + 41,97 50,3126,9 + 41,97 46,5833,7 + 41,97 50,3142,4 + 41,97 50,3148,3 + 41,97 50,3160,3 + 41,97 50,31

219,1 21,3 + 71,40 80,3226,9 + 71,40 80,3233,7 + 71,40 86,7542,4 + 71,40 86,8448,3 + 71,40 86,8560,3 + 71,40 86,85

Size[mm]

Cap No. 60 with Threaded HoleConcentric or Eccentric

Run Hole sizeWgt. Each

[kg] Painted Galv.


40

SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LING

S A

ND

FIT

TIN

GS

1

Reducing Laterals

+ Quoted on application.

ReducingLateralsNo. 30-R

No. 30R

O.D.[mm]

Reducing Lateral No. 30RWgt. Each

[kg] Painted Galv.88,9 x 88,9 x 60,3 4,4 + +88,9 x 88,9 x 73,0 4,4 + +

114,3 x 114,3 x 60,3 4,5 + +114,3 x 114,3 x 73,0 4,5 + +114,3 x 114,3 x 88,9 8,3 + +141,3 x 141,3 x 60,3 10,9 + +141,3 x 141,3 x 88,9 12,2 + +141,3 x 141,3 x 114,3 12,0 + +168,3 x 168,3 x 88,9 16,8 + +168,3 x 168,3 x 114,3 16,3 €301,65 +168,3 x 168,3 x 141,3 20,3 + +219,1 x 219,1 x 114,3 28,1 + +219,1 x 219,1 x 141,3 34,2 2441,61 +219,1 x 219,1 x 168,3 37,2 + +273,0 x 273,0 x 114,3 47,5 + +273,0 x 273,0 x 141,3 44,9 + +273,0 x 273,0 x 168,3 48,0 + +273,0 x 273,0 x 219,1 53,5 + +323,9 x 323,9 x 114,3 + + +323,9 x 323,9 x 141,3 55,3 + +323,9 x 323,9 x 168,3 62,1 + +323,9 x 323,9 x 219,1 66,7 + +323,9 x 323,9 x 273,0 75,8 + +355,6 x 355,6 x 114,3 78,0 + +355,6 x 355,6 x 168,3 84,8 + +355,6 x 355,6 x 219,1 93,4 + +355,6 x 355,6 x 273,0 106,6 + +355,6 x 355,6 x 323,9 113,4 + +406,4 x 406,4 x 168,3 97,5 + +406,4 x 406,4 x 219,1 114,5 + +406,4 x 406,4 x 273,0 120,0 + +406,4 x 406,4 x 323,0 133,8 + +406,4 x 406,4 x 355,6 138,3 + +457,0 x 457,0 x 168,3 124,3 + +457,0 x 457,0 x 219,1 124,7 + +457,0 x 457,0 x 273,0 136,0 + +457,0 x 457,0 x 323,9 157,4 + +457,0 x 457,0 x 355,6 158,8 + +457,0 x 457,0 x 406,4 164,2 + +508,0 x 508,0 x 323,9 167,8 + +508,0 x 508,0 x 355,6 174,2 + +508,0 x 508,0 x 406,4 180,5 + +610,0 x 610,0 x 406,4 192,8 + +610,0 x 610,0 x 508,0 258,6 + +


SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LIN

GS

AN

D F

ITT

ING

S1

AGS Reducing Lateral

+ Quoted on application.(sw) Made of segmentally welded steel.NOTE: AGS products in sizes 355,6 - 610,0mm are designed for the new Advanced Groove System (AGS), which uses deeper and wider, wedge-shaped grooves compared to the traditional Victaulic grooved system.Tee Wyes


AGS Reducing Lateral

No. W30-R

No. W30-R

O.D.[mm] Reducing Lateral No. W30-R (sw)

Run BranchWgt. Each

[kg]Price Each

Painted Galv.355,6 114,3 73,7 + +355,6 168,3 76,0 + +355,6 219,1 78,7 + +355,6 273,0 82,1 + +355,6 323,9 85,8 + +406,4 168,3 93,8 + +406,4 219,1 96,7 + +406,4 273,0 100,3 + +406,4 323,9 104,3 + +406,4 355,6 104,7 + +457,0 168,3 114,8 + +457,0 219,1 117,9 + +457,0 323,9 125,9 + +457,0 355,6 126,4 + +457,0 406,4 129,0 + +508,0 323,9 149,7 + +508,0 355,6 150,2 + +508,0 406,4 152,9 + +610,0 406,4 203,4 + +610,0 508,0 209,5 + +

Tee Wyes

No. 32

O.D.[mm]

Tee Wye No. 32Wgt. Each

[kg] Painted Galv.60,3 x 60,3 x 60,3 2,9 + +73,0 x 73,0 x 73,0 5,2 + +88,9 x 88,9 x 88,9 6,5 + +

101,6 x 101,6 x 101,6 10,4 + +114,3 x 114,3 x 88,9 10,4 + +114,3 x 114,3 x 114,3 11,8 + +141,3 x 141,3 x 88,9 13,2 + +141,3 x 141,3 x 114,3 16,6 + +141,3 x 141,3 x 141,3 21,8 + +168,3 x 168,3 x 88,9 16,9 + +168,3 x 168,3 x 114,3 21,0 + +168,3 x 168,3 x 141,3 24,9 + +168,3 x 168,3 x 168,3 27,4 + +219,1 x 219,1 x 88,9 34,5 + +219,1 x 219,1 x 114,3 34,7 + +219,1 x 219,1 x 141,3 38,8 + +219,1 x 219,1 x 168,3 50,8 + +219,1 x 219,1 x 219,1 57,5 + +273,0 x 273,0 x 88,9 43,5 + +273,0 x 273,0 x 114,3 44,2 + +273,0 x 273,0 x 141,3 52,2 + +273,0 x 273,0 x 168,3 60,4 + +273,0 x 273,0 x 219,1 70,8 + +273,0 x 273,0 x 273,0 86,2 + +323,9 x 323,9 x 323,9 108,9 + +


42

SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LING

S A

ND

FIT

TIN

GS

1

Reducing Tee Wyes

+ Quoted on application.Bull Plugs

+ Quoted on application.*Galvanized and other sizes quoted on application.Hose Nipples


ReducingTee WyesNo. 32-R

No. 32R

O.D.[mm]

Reducing Tee Wye No. 32RWgt. Each

[kg] Painted Galv.114,3 x 88,9 x 88,9 7,3 + +114,3 x 88,9 x 114,3 7,3 + +141,3 x 88,9 x 88,9 11,3 + +141,3 x 88,9 x 141,3 19,5 + +

141,3 x 114,3 x 88,9 9,5 + +141,3 x 114,3 x 114,3 11,3 + +168,3 x 114,3 x 168,3 27,7 + +168,3 x 141,3 x 88,9 12,2 + +168,3 x 141,3 x 114,3 14,1 + +219,1 x 168,3 x 114,3 20,4 + +219,1 x 168,3 x 219,1 50,8 + +

Bull PlugsNo. 61

No. 61

O.D.[mm]

Electroplated*

Steel Bull Plug No. 61Wgt.Each

[kg]PriceEach

60,3 0,9 €60,8573,0 1,4 87,1088,9 2,0 138,85

114,3 3,4 143,70141,3 5,4 +168,3 7,7 399,67

Hose NipplesNo. 48

No. 48

O.D.[mm]

Length[mm]

Steel Hose Nipple No. 48

Wgt.Each[kg]


26,9 79 0,1 €18,03 €22,1433,7 86 0,2 18,03 22,1442,4 98 0,3 18,03 22,1448,3 98 0,4 18,03 22,1460,3 114 0,5 18,03 22,1473,0 137 0,9 18,03 22,1488,9 146 1,5 45,26 53,78

114,3 178 2,2 55,69 112,27141,3 222 3,6 146,68 170,40168,3 257 6,5 153,72 153,72219,1 302 11,2 342,33 421,80273,0 318 18,2 475,10 570,74323,9 368 28,1 519,50 617,17


SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LIN

GS

AN

D F

ITT

ING

S1

Flanged Adapter Nipples

+ Quoted on application.AGS Flanged Adapter Nipple ANSI 150

+ Quoted on Application.* Raised face flanges are standard; flat flanges are quoted on application.NOTE: AGS products in sizes 355,6 - 610,0mm are designed for the new Advanced Groove System (AGS), which uses deeper and wider, wedge-shaped grooves compared to the traditional Victaulic grooved system.

Flanged Adapter NipplesNo. 41, No. 45, No. 46

No.(s)41, 45 & 46

O.D.[mm]

No. 41 - 125 lb. No. 45 - 150 lb. No. 46 - 300 lb.Black Galv. Black Galv. Black Galv.

33,7 x 76,0 + + + + + +42,4 x 102,0 + + + + + +48,3 x 102,0 + + + + + +60,3 x 102,0 + + + + + +73,0 x 102,0 + + + + + +88,9 x 102,0 €108,15 + + + + +

101,6 x 102,0 + + + + + +114,3 x 152,0 + + + €227,80 + +141,3 x 152,0 + + + + + +168,3 x 152,0 + + + 283,78 + +219,1 x 152,0 + + + 412,72 + +273,0 x 203,0 + + + + €828,62 +323,9 x 203,0 + + + + + +355,6 x 203,0 + + + 1784,83 + +406,4 x 203,0 + + + + + +457,0 x 203,0 + + + + + +508,0 x 203,0 + + + + + +610,0 x 203,0 + + + + + +

AGS Flanged Adapter Nipple ANSI 150

No. W45

No. W45

O.D.[mm]

Flanged adapter nipple ANSI 150 No. W45*

Wgt. Each [kg] Length [mm]Price Each

Painted Galv.355,6 16,3 203 €1366,68 €1784,83406,4 19,1 203 1742,32 4528,60457,0 21,3 203 2373,85 3011,11508,0 23,6 203 2636,09 3450,65610,0 28,6 203 3841,33 4892,02


44

SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LING

S A

ND

FIT

TIN

GS

1

3D Long Radius Elbows

+ Quoted on application.Also available 76,1 mm and 165,1mm sizes. Contact Victaulic.NOTES: (3D, 5D, and 6D Elbows)1. Elbow sizes up to and including 114,3mm are provided with 114,3mm long integral tangent, remaining sizes provided with integral tangents with lengths equal to nominal pipe size.2. Grooved or plain-end available – specify choice on order.3. Material: standard wall steel pipe to ASTM A-53, Grade 'B' (other materials available on request).4. Bends to conform to above radii.5. C-E tolerances: 60,3 - 168,3mm ± 3,175; 219,1 - 610mm ± 9,525.6. All weights are approximate based on calculated weight of pipe.7. Also available in 76,1 mm and 165,1mm sizes, contact Victaulic.

3D LongRadius ElbowsNo. 10, No. 14, No. 11, No. 15, No. 12, No. 13

90˚ ElbowNo. 10-3DNo. 10-5DNo. 10-6D

CtoE

R=1¹⁄₂ D3D5D6D

60˚ ElbowNo. 14-3DNo. 14-5DNo. 14-6D

45˚ ElbowNo. 11-3DNo. 11-5DNo. 11-6D

30˚ ElbowNo. 15-3DNo. 15-5DNo. 15-6D

22¹˚ ElbowNo. 12-3DNo. 12-5DNo. 12-6D

11¹⁄₄˚ ElbowNo. 13-3DNo. 13-5DNo. 13-6D

O.D.[mm]

No. 10-3D90˚ Elbow

No. 14-3D60˚ Elbow

No. 11-3D45˚ Elbow

No. 15-3D30˚ Elbow

No. 12-3D22¹˚ Elbow

No. 13-3D11¹⁄₄˚ Elbow

Wgt. Each[kg]

PriceEach

Wgt. Each[kg]

PriceEach

Wgt. Each[kg]

PriceEach

Wgt. Each[kg]

PriceEach

Wgt. Each[kg]

PriceEach

Wgt. Each[kg]

PriceEach

60,3 2,4 + 2,0 + 1,8 + 1,5 + 1,5 + 1,3 +73,0 4,3 + 3,5 + 3,0 + 2,6 + 2,4 + 2,1 +88,9 6,4 + 5,0 + 4,3 + 3,3 + 3,3 + 2,8 +

101,6 8,4 + 6,5 + 5,6 + 4,6 + 4,2 + 3,5 +114,3 10,9 + 8,4 + 7,1 + 5,8 + 5,2 + 4,2 +127,0 14,3 + 11,0 + 9,3 + 7,6 + 6,8 + 5,5 +141,3 18,6 + 14,2 + 12,0 + 9,9 + 8,8 + 7,2 +168,3 28,9 + 22,1 + 18,7 + 15,4 + 13,7 + 11,2 +219,1 58,08 + 44,4 + 37,6 + 30,9 + 27,4 + 22,4 +273,0 102,7 + 78,7 + 66,6 + 54,7 + 48,6 + 39,6 +323,9 150,9 + 115,6 + 97,9 + 80,3 + 71,4 + 58,2 +355,6 193,8 + 148,5 + 125,8 + 103,1 + 91,8 + 74,8 +381,0 + + + + + + + + + + + +406,4 254,1 + 194,6 + 164,9 + 135,1 + 120,3 + 98,0 +457,0 322,4 + 246,9 + 209,3 + 171,5 + 152,6 + 124,3 +508,0 398,9 + 305,5 + 258,9 + 212,2 + 188,8 + 153,9 +559,0 + + + + + + + + + + + +610,0 576,2 + 441,4 + 374,0 + 306,5 + 272,8 + 222,3 +


SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LIN

GS

AN

D F

ITT

ING

S1

3D Cast Elbow for abrasive services

+ Quoted on application.5D Long Radius Elbows


3D Cast ElbowFor Abrasive Services

45˚ 3DCast Elbow

90˚ 3DCast Elbow

O.D.[mm]

90˚ Elbow 45˚ Elbow

C - E[mm]

Aprx.Wgt.Each

[kg]PriceEach

C - E[mm]

Aprx.Wgt.Each

[kg]PriceEach

73,0 254 2,3 + 165 2,1 +88,9 330 7,3 + 197 4,7 +

114,3 406 10,2 + 229 7,8 +168,3 610 31,8 + 343 20,4 +


O.D.[mm]

No. 10-5D90˚ Elbow

No. 14-5D60˚ Elbow

No. 11-5D45˚ Elbow

No. 15-5D30˚ Elbow


No. 13-5D11¹⁄₄˚ Elbow

Wgt. Each[kg]

PriceEach

Wgt. Each[kg]

PriceEach

Wgt. Each[kg]

PriceEach

Wgt. Each[kg]

PriceEach

Wgt. Each[kg]

PriceEach

Wgt. Each[kg]

PriceEach

60,3 3,3 + 2,5 + 2,2 + 1,8 + 1,6 + 1,4 +73,0 6,0 + 4,6 + 3,9 + 3,2 + 2,8 + 2,3 +88,9 9,0 + 6,8 + 5,7 + 4,5 + 4,0 + 3,1 +

101,6 12,2 + 9,1 + 7,5 + 5,9 + 5,1 + 4,0 +114,3 16,1 + 11,8 + 9,7 + 7,5 + 6,5 + 4,9 +127,0 21,0 + 15,4 + 12,6 + 9,8 + 8,4 + 6,4 +141,3 27,2 + 20,0 + 16,4 + 12,7 + 10,9 + 8,3 +168,3 42,4 + 31,1 + 25,5 + 19,9 + 17,1 + 12,8 +219,1 85,1 + 62,5 + 51,2 + 39,9 + 34,2 + 25,8 +273,0 150,8 + 110,7 + 90,7 + 70,7 + 60,7 + 45,6 +323,9 221,5 + 162,7 + 133,2 + 103,8 + 89,1 + 67,0 +355,6 284,6 + 209,0 + 171,1 + 133,4 + 114,4 + 86,1 +381,0 + + + + + + + + + + + +406,4 373,0 + 273,9 + 224,3 + 174,8 + 150,0 + 112,9 +457,0 473,3 + 347,6 + 284,7 + 221,8 + 190,4 + 143,2 +508,0 585,6 + 430,0 + 352,2 + 274,4 + 235,5 + 177,2 +559,0 + + + + + + + + + + + +610,0 845,9 + 621,3 + 508,8 + 396,4 + 340,3 + 256,0 +


46

SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LING

S A

ND

FIT

TIN

GS

1

6D Long Radius Elbows



O.D.[mm]

No. 10-6D90˚ Elbow

No. 14-6D60˚ Elbow

No. 11-6D45˚ Elbow

No. 15-6D30˚ Elbow


No. 13-6D11¹⁄₄˚ Elbow

Wgt. Each[kg]

PriceEach

Wgt. Each[kg]

PriceEach

Wgt. Each[kg]

PriceEach

Wgt. Each[kg]

PriceEach

Wgt. Each[kg]

PriceEach

Wgt. Each[kg]

PriceEach

60,3 3,7 + 2,9 + 2,4 + 2,0 + 1,8 + 1,5 +73,0 6,9 + 5,2 + 4,3 + 3,5 + 3,0 + 2,4 +88,9 10,4 + 7,7 + 6,4 + 5,0 + 4,3 + 3,3 +

101,6 14,1 + 10,3 + 8,4 + 6,5 + 5,6 + 4,2 +114,3 18,6 + 13,5 + 10,9 + 8,4 + 7,1 + 5,2 +127,0 24,4 + 17,7 + 14,3 + 11,0 + 9,3 + 6,8 +141,3 31,6 + 22,9 + 18,6 + 14,2 + 12,0 + 8,8 +168,3 48,2 + 35,7 + 28,9 + 22,1 + 18,7 + 13,7 +219,1 98,7 + 71,5 + 58,0 + 44,4 + 37,6 + 27,4 +273,0 174,8 + 126,7 + 102,7 + 78,7 + 66,6 + 48,6 +323,9 256,8 + 186,2 + 150,9 + 115,6 + 97,9 + 71,4 +355,6 330,0 + 239,2 + 193,8 + 148,5 + 125,8 + 91,8 +381,0 + + + + + + + + + + + +406,4 432,4 + 313,5 + 254,1 + 194,6 + 164,9 + 120,3 +457,0 548,7 + 397,9 + 322,4 + 246,6 + 209,3 + 152,6 +508,0 678,9 + 492,2 + 398,9 + 305,5 + 258,9 + 188,8 +559,0 + + + + + + + + + + + +610,0 980,7 + 711,0 + 576,2 + 441,4 + 374,0 + 272,8 +


SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LIN

GS

AN

D F

ITT

ING

S1

EXTRA HEAVY "ES" ENDSEAL® FITTINGS

Elbows and Tees

For sizes to 323,9mm, contact Victaulic.Steel Full Flow Elbows available with longer center to end dimensions.Contact Victaulic for details.+ Quoted on application.Header Tee

*Specify choice on order.+ Quoted on application.

Elbows and TeesNo. 62, No. 63, No. 64

O.D.[mm]

90˚ ElbowNo. 62

Price Each

45˚ ElbowNo. 63

Price Each

TeeNo. 64

Price Each60,3 + + +73,0 + + +88,9 + + +

114,3 + + +168,3 + + +

Header TeeNo. 22

C to E

CtoE

Header TeeNo. 22 ES

O.D.[mm]

C - E *[mm]

PriceEach

60,3 165,1 +60,3 127,0 +


48

SECTION 1

GR

OO

VE

D IP

S P

IPE

CO

UP

LING

S A

ND

FIT

TIN

GS

1


SECTION 2

IPS

HO

LE C

UT

PR

OD

UC

TS

2

Section 2IPS Hole CutProducts2

Hole CutProductsSection 2 - Hole Cut Products


50

SECTION 2

IPS

HO

LE C

UT

PR

OD

UC

TS

2

IPS HOLE CUT

Styles 920 and 920N Mechanical-T® Outlet

Mechanical-T® OutletStyles 920 and 920N


for details

ULCUL¨

FM

Style 920(N) Grooved Style 920(N) Female

O.D.[mm]

Run x Brch.StyleNo.

Complete Mechanical-T®

Grooved Branch†Complete Mechanical-T®

Female Thd. Branch† Bolts& Nuts

Size[mm/

Inches]

Wgt.Each[kg]


Price Each

Painted Galv. Painted Galv.60,3 x 21,3 920N - - - 1,5 €14,82 €19,17 M12 x 7060,3 x 26,9 920N - - - 1,5 14,82 19,17 M12 x 7060,3 x 33,7 920N - - - 1,4 14,82 19,17 M12 x 7060,3 x 42,4 920N 1,7 €17,13 €22,21 1,5 17,13 22,21 M12 x 7060,3 x 48,3 920N 1,7 17,13 22,21 1,5 17,13 22,21 M12 x 7073,0 x 21,3 920N - - - 1,4 16,27 + ¹/₂ x 2³/₄73,0 x 26,9 920N - - - 1,4 16,26 21,06 ¹/₂ x 2³/₄73,0 x 33,7 920N - - - 1,4 20,98 27,16 ¹/₂ x 2³/₄73,0 x 42,4 920N 1,7 20,97 27,16 1,5 20,97 27,16 ¹/₂ x 2³/₄73,0 x 48,3 920N 1,7 20,97 27,16 1,6 20,97 27,16 ¹/₂ x 2³/₄

76,1 x 21,3 * 920 - - - 1,8 16,27 21,06 M12 x 7076,1 x 26,9 * 920 - - - 1,8 16,26 21,06 M12 x 7076,1 x 33,7 * 920 - - - 1,7 20,97 27,16 M12 x 7076,1 x 42,4 * 920N 2,0 20,97 27,16 2,0 20,97 27,16 M12 x 7076,1 x 48,3 * 920N 2,0 20,97 27,16 2,0 20,97 27,16 M12 x 7088,9 x 21,3 920N - - - 1,6 17,08 22,11 M12 x 7088,9 x 26,9 920N - - - 1,6 17,08 22,11 M12 x 7088,9 x 33,7 920N - - - 1,6 20,97 27,16 M12 x 7088,9 x 42,4 920N 1,8 20,97 27,16 1,8 20,97 27,16 M12 x 7088,9 x 48,3 920N 1,9 20,97 27,16 1,8 20,97 27,16 M12 x 7088,9 x 60,3 920N 2,3 20,97 27,16 2,1 20,97 27,16 M12 x 83

108,0 x 42,4 920N - - - 2,3 28,23 36,59 M12 x 70108,0 x 48,3 920N - - - 2,3 28,23 36,59 M12 x 70108,0 x 60,3 920N - - - 2,5 39,08 48,80 M12 x 70108,0 x 73,0 920 - - - 2,5 + + M12 x 70108,0 x 88,9 920 3,0 + + - - - M12 x 83114,3 x 21,3 920N - - - 1,8 24,59 31,87 M12 x 70114,3 x 26,9 920N - - - 1,8 24,59 31,87 M12 x 70114,3 x 33,7 920N - - - 1,8 24,59 31,87 M12 x 70114,3 x 42,4 920N 1,9 24,59 31,87 1,8 24,59 31,87 M12 x 70114,3 x 48,3 920N 2,0 24,59 31,87 1,9 24,59 31,87 M12 x 70114,3 x 60,3 920N 2,3 25,38 32,91 2,1 25,38 32,91 M12 x 70114,3 x 73,0 920 2,6 25,38 32,91 2,3 25,38 32,91 M12 x 70114,3 x 76,1 920 - 25,38 32,91 2,9 25,38 32,91 M12 x 70114,3 x 88,9 920 3,8 25,38 32,91 2,9 25,38 32,91 M12 x 83141,3 x 48,3 920 3,4 30,66 39,71 3,4 30,66 39,71 M16 x 121141,3 x 60,3 920 3,7 30,66 39,71 3,6 30,66 39,71 M16 x 121141,3 x 73,0 920 3,8 30,66 39,71 3,6 30,66 + M16 x 121141,3 x 76,1 920 - - - 4,0 30,66 39,71 M16 x 121141,3 x 76,1 920N 4,0 + 38,60 - - - M16 x 121141,3 x 88,9 920 4,0 30,66 39,71 4,0 30,66 39,71 M16 x 121159,0 x 48,3 920N - - - 3,5 33,88 43,93 M16 x 70


SECTION 2

IPS

HO

LE C

UT

PR

OD

UC

TS

2

† Some size Mechanical-T® outlets are available with BSPT (British Standard Pipe Threads) female threaded outlets. Contact Victaulic for details.* Supplied with British Standard Threads only, unless ordered otherwise.+ Quoted on application.Vic-Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T® outlet.

Style 920 Mechanical-T® Cross

Mechanical-T cross assemblies can be achieved with the use of two Style 920 or Style 920N upper housings. The upper housings must be of the same run size, but may have a different outlet size. Most sizes of Mechanical-T are available with either grooved or female threaded outlets. Your choice must be specified on each order.Note that both upper housings must be either Style 920 or Style 920N. Style 920 and 920N cannot be combined into one cross assem-bly.The price of a Mechanical-T cross assembly is the sum of the price of both Mechanical-Ts used in the selected combination.

159,0 x 60,3 920N - - - 3,6 €42,76 €55,41 M16 x 70159,0 x 73,0 920 - - - 3,9 + + M16 x 70

159,0 x 108,0 920 4,5 + + - - - M16 x 70165,1 x 48,3 * 920 - - - 3,6 32,16 41,65 M16 x 121165,1 x 60,3 920 3,6 €32,16 €41,65 - 32,16 41,65 M16 x 121

165,1 x 73,0 * 920 3,9 + 38,58 - + + M16 x 121165,1 x 76,1 920 3,9 32,17 41,67 - 32,16 41,65 M16 x 121

165,1 x 88,9 * 920 4,6 38,70 + - 38,70 50,16 M16 x 121165,1 x 114,3 920 4,8 46,81 60,64 3,8 46,81 60,64 M16 x 121168,3 x 42,4 920N - 32,16 41,65 2,2 32,16 41,65 M12 x 70168,3 x 48,3 920N 2,4 32,16 41,65 2,3 32,16 41,65 M12 x 70168,3 x 60,3 920N 2,7 32,16 41,65 2,5 32,16 41,65 M12 x 70168,3 x 73,0 920 3,8 32,16 41,65 3,4 32,16 41,65 M16 x 121168,3 x 76,1 920 - 32,16 41,65 3,8 32,16 41,65 M16 x 121168,3 x 88,9 920 4,5 32,16 41,65 3,8 32,16 41,65 M16 x 121

168,3 x 114,3 920 4,6 46,81 60,64 4,6 46,81 60,64 M16 x 121219,1 x 60,3 920 - - - 5,3 46,81 60,64 M20 x 108219,1 x 60,3 920N 5,3 + 56,15 - - - M20 x 108219,1 x 73,0 920 5,3 46,81 60,64 5,3 46,81 60,64 M20 x 108219,1 x 76,1 920 - - - 5,3 46,81 60,64 M20 x 108219,1 x 76,1 920N 5,3 + 56,15 - - - M20 x 108219,1 x 88,9 920 5,7 72,62 94,11 5,3 72,62 94,11 M20 x 108

219,1 x 114,3 920 6,9 82,69 107,19 5,7 82,69 107,19 M20 x 108

O.D.[mm]

Run x Brch.StyleNo.

Complete Mechanical-T®

Grooved Branch†Complete Mechanical-T®

Female Thd. Branch† Bolts& Nuts

Size[mm/

Inches]

Wgt.Each[kg]


Price Each

Painted Galv. Painted Galv.

Mechanical-T® CrossStyle 920


52

SECTION 2

IPS

HO

LE C

UT

PR

OD

UC

TS

2

Style 923 Vic-Let™ Strapless Outlet

Style 924 Vic-O-Well™ Thermometer Outlet

* Vic-O-Well™ is internally threaded to 1¹⁄₄ - 18 NEF 2B.

Vic-Let™ Strapless OutletStyle 923

ULCUL¨

O.D.[mm]

Vic-Let™ COMPLETEWith "E" or "T" Gasket

Wgt. Each[kg]

PricePer Unit

114,3 - 219,1 x 21,3 NPT IPS 0,9 €58,63114,3 - 219,1 x 26,9 NPT IPS 0,7 58,63

273,0 and larger x 21,3 NPT IPS 0,9 58,63273,0 and larger x 26,9 NPT IPS 0,7 58,63

Vic-O-Well™ Thermometer OutletStyle 924

O.D.[mm]

Vic-O-Well™ COMPLETEWith "E" or "T" Gasket

Wgt. Each[kg]

PricePer Unit

114,3 - 219,1 For 6 Stem* 1,1 €97,12273,0 Flat for 6 Stem* 1,0 100,62


SECTION 3

GR

OO

VE

D IP

SP

IPE

VA

LVE

S3

Section 3Grooved IPSPipe Valves3

Valvesand SpecialtiesSection 3 - Valves and Specialties


54

SECTION 3

GR

OO

VE

D IP

SP

IPE

VA

LVE

S3

GROOVED IPS VALVES

Vic®-300 MasterSealTM Butterfly Valves

* Clearflow is a registered trademark of Perfection Corp.+ Quoted on application.Handwheels for Gear Operators

Vic®-300 MasterSealTM Weights

Vic®-300 MasterSealTM Butterfly ValvesSeries 761

Vic®-300 MasterSealTM with Lever Handle

Vic®-300 MasterSealTM with Gear Operator

O.D.[mm]

Bare Valve with "E" or "T" Gasket

Valve with LeverHandle with "E" or

"T" Gasket

Valve with Gear Operator with "E" or

"T" Gasket60,3 + €190,23 +73,0 + 205,49 +76,1 + 205,49 +88,9 + 223,15 +

114,3 + 245,83 +139,7 + 340,72 +141,3 + 340,72 +165,1 + 380,42 +168,3 + 380,42 +219,1 + 608,03 €773,54273,0 + 1019,79 1198,64323,9 + + 1350,77

Handwheels for Gear OperatorsFits Vic-300, Series 700, 709 and 608 Gear Operators

HandwheelDiameter

[mm]

ValveO.D.[mm]

PriceEach

102 48,3 – 141,3 mm +125 48,3 – 141,3 mm +160 219,1 mm +220 273,0 – 323,9 mm +330 355,6 – 406,4 mm +

Vic®-300 MasterSealTM WeightsSeries 761

O.D.[mm] Bare Valve

Valve with Lever Handle

Valve with Gear Operator

60,3 1,6 2,7 2,773,0 2,3 3,4 3,476,1 2,3 3,4 3,488,9 2,7 3,9 3,9

114,3 4,2 5,4 5,4139,7 7,6 9,1 9,4141,3 7,6 9,1 9,4165,1 9,1 10,5 10,9168,3 9,1 10,5 10,9219,1 15,6 17,0 17,4273,0 32,7 38,1 39,0323,9 39,9 45,4 44,2


SECTION 3

GR

OO

VE

D IP

SP

IPE

VA

LVE

S3

Grooved End Butterfly Valves

Chain €10,73 EUR/m.+ Quoted on application.‡ 2" nut, in lieu of handwheel, available at no additional charge. Specify clearly on order.Gear Operators available with both memory stop and chain wheel – add both adders (3 _ _ _- 24).When ordered separately, chain wheels and memory stops are non-cancellable and non-returnable.

Chain €10,73 EUR/m.† Featuring original groove configuration. These valves cannot be installed in Advanced Grooved Systems (AGS).+ Quoted on application.‡ 2" nut, in lieu of handwheel, available at no additional charge. Specify clearly on order.Gear Operators available with both memory stop and chain wheel – add both adders (3 _ _ _- 24).When ordered separately, chain wheels and memory stops are non-cancellable and non-returnable.

Grooved End Butterfly Valves †

Series 7062.065 kPa

Series 7091.270 kPa

O.D.[mm]

Series 706With GearOperator‡

(1182-20)Wgt.Each

[kg]


(1182-00)Wgt.Each

[kg]

Gear Operator Options ‡

MemoryStop

ChainWheel

355,6 + 69,0 €4826,34 56,7 + +406,4 + 84,8 4717,19 69,4 + +457,0 + 116,6 4875,00 90,3 + +508,0 + 161,0 5076,54 129,3 + +610,0 + 236,8 6841,09 204,6 + +

O.D.[mm]


(1182-20)Wgt.Each

[kg]

Gear Operator Options ‡

MemoryStop

ChainWheel

355,6 + 63,5 €3565,65 +406,4 + 77,2 3949,15 +457,0 + 99,8 4387,50 +508,0 + 140,6 4568,89 +610,0 + 206,4 6156,98 +


56

SECTION 3

GR

OO

VE

D IP

SP

IPE

VA

LVE

S3

AGS Butterfly Valves

Chain €10,73 EUR/m.+ Quoted on application.‡ 2" nut in lieu of handwheel available at no additional charge. Specify clearly on order.Gear operators available with both memory stop and chain wheel. Add both adders (3 - 24)NOTE: AGS products in sizes 355,6 - 610,0mm are designed for the new Advanced Groove System (AGS), which uses deeper and wider, wedge-shaped grooves compared to the traditional Victaulic grooved system.

Chain €10,73 EUR/m.+ Quoted on application.‡ 2" nut in lieu of handwheel available at no additional charge. Specify clearly on order.Gear operators available with both memory stop and chain wheel. Add both adders (3 - 24)NOTE: AGS products in sizes 355,6 - 610,0mm are designed for the new Advanced Groove System (AGS), which uses deeper and wider, wedge-shaped grooves compared to the traditional Victaulic grooved system.Series 700

For Series 700 spare parts, contact Victaulic for details.Series 700 are available with chain wheels. Contact Victaulic for details.† Lever Lock includes infinite position and memory stop options at no extra charge.‡ 2" nut, in lieu of handwheel, available at no additional charge. Specify clearly on order (3 _ _ _- 23) – see Valve Numbering System further in this section.+ Quoted on application.

AGS Butterfly Valves

Series W706, Series W709

Series W706 (300PSI)

Series W709 (175PSI)

O.D.[mm]

Series W706Bare Valve with "E" or

"T" gasket(3182-00)

Series W706with Gear Operator with

"E" or "T" gasket(3182-20) Gear Operator Options ‡

Wgt.Each[kg] Price Each


MemoryStop

ChainWheel

355,6 56,7 + 70,8 €4826,34 + +406,4 69,4 + 91,2 4717,19 + +457,0 90,3 + 122,2 4875,00 + +508,0 129,3 + 174,3 5076,55 + +610,0 204,6 + 274,4 6841,09 + +

O.D.[mm]

Series W709Bare Valve with "E" or

"T" gasket(1182-00)

Series W709with Gear Operator with

"E" or "T" gasket(1182-20) Gear Operator Options ‡



MemoryStop

ChainWheel

355,6 56,7 + 65,2 €3565,65 + +406,4 69,4 + 77,9 3949,15 + +457,0 90,3 + 98,7 5193,47 + +508,0 129,3 + 151,0 4568,89 + +610,0 204,6 + 236,3 6156,98 + +

Grooved End Butterfly ValvesSeries 700

O.D.[mm]

Two PositionDetent Handle

Lever Lockwith Infinitely

Variable Handle†

Valve with ManualGear Operator ‡




WITH STANDARD TRIM48,3 1,3 €143,98 1,5 €170,24 7,5 €391,6760,3 1,5 147,01 1,7 172,28 6,9 396,18

WITH STAINLESS STEEL TRIM48,3 1,3 €161,67 + + + +60,3 1,5 161,67 1,7 €178,89 6,9 €403,30


SECTION 3

GR

OO

VE

D IP

SP

IPE

VA

LVE

S3

Series 726

Series 726 valves are available with electric, pneumatic and hydraulic actuators or chainwheels. Contact Victaulic for details.* Valve with gear operator requires additional lead time. Contact Victaulic for details.+ Quoted on application.Series 716 Vic-Check® Check Valves

Series 716 valves are available up to 610,0mm.NOTE: Vic-Check® valves are rated to 28 Bar (273 - 323,9 mm). Available with Grade "E" or "T" seat. Specify choice on order.For Series 716 sizes 114,3 - 323,9 mm only – Drilling, tapping and plugs are available. Contact Victaulic for pricing and delivery.+ Quoted on application.

Grooved End Ball ValvesSeries 726

48,3 - 88,9 mm

114,3 - 168,3 mm

O.D.[mm]

WITH CARBON STEEL TRIM WITH STAINLESS STEEL TRIM

Wgt.Each[kg]

complete with

Handle & Tamper

Resistant Lock/Seal

Option

Complete with Gear Operator*

Wgt.Each[kg]

Complete with

Handle & Tamper

Resistant Lock/Seal

Option

Complete with Gear Operator*

(1166-15) (1166-20) (1126-15) (1126-20)48,3 2,0 €111,13 + 2,2 €117,35 +60,3 2,9 142,36 €773,75 3,4 150,40 €875,3773,0 4,7 210,37 721,74 5,3 224,12 1277,5676,1 4,7 210,37 721,74 5,3 224,24 1277,5688,9 6,8 295,47 806,85 7,8 320,47 1456,62

(8166-15) (8166-20) (8126-15) (8126-20)114,3 18,8 €624,88 €1326,39 20,4 €666,85 €1744,84165,1 35,6 1057,32 1853,90 37,2 1130,15 3754,72168,3 35,6 1057,32 1853,90 37,2 1130,15 3754,72

Vic-Check® Check ValvesSeries 716

Series 71673,0-88,9

Series 716114,3-355,6

O.D.[mm]

Wgt. Each[kg]

PriceEach

73,0 1,6 €166,6076,1 1,6 177,7988,9 2,0 192,87

114,3 7,3 275,65139,7 9,1 390,13141,3 9,1 391,72165,1 12,5 412,41168,3 12,7 414,57219,1 18,1 796,14273,0 45,4 1228,36323,9 63,5 1691,95355,6 + 1910,87406,4 600,0 +


58

SECTION 3

GR

OO

VE

D IP

SP

IPE

VA

LVE

S3

AGS Dual Disc Vic-Check® Valve

+ Quoted on application.NOTE: AGS products in sizes 355,6 - 610,0mm are designed for the new Advanced Groove System (AGS), which uses deeper and wider, wedge-shaped grooves compared to the traditional Victaulic grooved system.Series 779 Venturi Check Valve

* Valve complete includes Venturi Check valve, drilled, tapped and plugged with Flow Measuring Kit enclosed (field assembly required).Flow Measuring Kit includes extension nipples, bronze access valves, quick disconnect for meter connection and flow chart tag to affix to the valve.+ Quoted on application.

AGS Dual Disc Vic-Check® Valve

Series W715

Series W715

O.D.[mm]

Wgt. Each[kg]

PriceEach

355,6 64,0 €2419,03406,4 73,0 3271,71457,0 82,0 3815,93508,0 91,0 5139,92610,0 109,0 7509,49

Venturi Check ValveSeries 779 O.D.

[mm]Wgt.Each

[kg]

Valve*

CompletePrice Each

FlowMeasuringKit ONLY

Price Each114,3 7,3 €421,43 +141,3 9,0 598,03 +168,3 12,7 600,65 +219,1 18,1 1074,27 +273,0 45,4 1441,47 +323,9 63,5 1991,49 +


SECTION 3

GR

OO

VE

D IP

SP

IPE

VA

LVE

S3

GROOVED IPS PIPE ACCESSORIES

Series 731-G Suction Diffuser

Start up baskets available. Contact Victaulic for pricing.Style 731-I is available with ANSI, PN10 and PN16 flange – 355,6 mm flange ANSI only. Specify choice on order.

Series 731-ISuction Diffuser

O.D.System Side

(Grooved) x Pump Side (Flanged)

[mm]

Center of Pipe Inlet to Flange Face

[mm]Aprx Wgt Each

[kg] Price Each76,1 x 60,3 173 13,6 +88,9 x 60,3 160 9,8 €1202,4888,9 x 73,0 160 9,8 1228,2388,9 x 76,1 173 9,1 1228,2388,9 x 88,9 207 24,5 1228,23

114,3 x 60,3 173 12,2 1246,88114,3 x 73,0 187 16,1 1260,08114,3 x 76,1 173 12,2 1260,08114,3 x 88,9 207 20,4 1260,08

114,3 x 114,3 232 34,9 1286,15139,7 x 76,1 173 20,0 1414,77139,7 x 88,9 207 28,1 1414,77

139,7 x 114,3 232 24,9 1433,73139,7 x 139,7 257 27,2 1506,47141,3 x 73,0 173 20,0 1414,77141,3 x 88,9 207 28,1 1637,37

141,3 x 114,3 232 20,4 1433,73141,3 x 141,3 270 62,1 1506,47168,3 x 88,9 207 39,9 1523,89

168,3 x 114,3 232 38,6 1528,68168,3 x 139,7 270 31,8 1828,62168,3 x 141,3 270 50,8 1828,62168,3 x 168,3 327 61,2 1898,73219,1 x 114,3 232 53,1 1926,82219,1 x 139,7 257 65,3 1947,82219,1 x 141,3 270 43,1 1947,82219,1 x 168,3 327 79,4 2053,95219,1 x 219,1 384 79,4 3534,63273,0 x 168,3 327 59,9 3670,03273,0 x 219,1 384 59,0 3988,40273,0 x 273,0 435 186,0 4806,08323,9 x 219,1 384 81,6 5162,66323,9 x 273,0 435 170,1 5688,86323,9 x 323,9 613 226,8 7912,92355,6 x 273,0 435 213,2 7364,26355,6 x 323,9 613 181,4 8226,41355,6 x 355,6 664 185,8 9989,89406,4 x 323,9 497 180,6 10282,11


60

SECTION 3

GR

OO

VE

D IP

SP

IPE

VA

LVE

S3

AGS Suction Diffuser

+ Quoted on application.Start up baskets are available. Contact Victaulic for pricing.NOTE: AGS products in sizes 355,6 - 610,0mm are designed for the new Advanced Groove System (AGS), which uses deeper and wider, wedge-shaped grooves compared to the traditional Victaulic grooved system.Style 732 Grooved End Vic-Strainers®

* Vic-Strainer® Style 732 standard components include ductile iron body, access cap and coupling (with Grade "E" EPDM gasket, plated bolts and nuts) and Type 304 stainless steel basket. Sizes 60,3 - 88,9mm have ¹⁄₁₆" basket-holes; sizes 114,3 - 323,9mm have ¹⁄₈" holes standard. For other hole sizes contact Victaulic.Style 732 supplied with an NPT tap and plug to accommodate a drain or blow-down valve.+ Quoted on application.Style 730 Tee-Type Strainer

* Vic-Strainer® Style 730 standard components include ductile iron body, access cap and coupling (with Grade "E" EPDM gasket, plated bolts and nuts) and Type 304 stainless steel basket. Sizes 60,3 - 88,9mm No. 12 mesh standard; sizes 114,3 and larger No. 6 mesh standard. For other hole sizes contact Victaulic.Style 730 supplied with an NPT tap and plug to accommodate a drain or blown-down valve.+ Quoted on application.

AGS Suction Diffuser

Series W731

Series W731

O.D. [mm] Series W731 AGS Suction Diffuser

Grooved Inlet Flanged OutletWgt each

[kg] Price Each355,6 273,0 150,7 €3362,46355,6 323,9 150,7 3167,79355,6 355,6 150,7 3114,13406,4 323,9 277,0 +406,4 355,6 280,0 4470,61406,4 406,4 285,0 +457,0 323,9 325,0 +457,0 355,6 360,0 +457,0 406,4 402,0 +457,0 457,0 409,0 +508,0 508,0 570,0 +610,0 610,0 955,0 +

Grooved End Vic-Strainers®

Style 732Wye Strainer

O.D.[mm]

Wgt.Each[kg]

Style 732 - Price Each Std.Basket OnlyPrice Each

Fine MeshBasket OnlyPrice EachStandard* Galv.

60,3 4,5 €137,38 €190,24 + +73,0 6,4 152,78 209,58 + +76,1 + 162,19 226,34 + +88,9 9,1 174,82 259,30 + +

114,3 14,5 248,62 357,40 + +139,7 + 545,04 647,52 + +141,3 22,7 474,06 643,15 + +165,1 32,7 756,35 + + +168,3 32,7 658,23 1260,40 + +219,1 56,7 988,66 2429,61 + +273,0 93,0 + + + +323,9 127,0 + + + +

Tee-Type StrainerStyle 730

O.D.[mm]

Wgt.Each[kg]

Style 730 - Price Each Std.Basket OnlyPrice Each

Fine MeshBasket OnlyPrice EachStandard* Galv.

48,3 - + + + +60,3 3,6 €262,45 + + +73,0 4,1 280,52 + + +88,9 9,5 336,89 + + +

114,3 9,3 402,58 + + +141,3 14,1 504,05 + + +168,3 20,0 691,58 + + +219,1 34,0 1047,96 + + +273,0 62,0 1487,94 €1970,19 + +323,9 89,4 1621,87 2474,95 + +355,6 136,1 7059,06 11418,49 + +406,4 158,8 8408,24 + + +457,2 208,7 + + + +508,0 256,3 + + + +559,0 376,5 + + + +610,0 577,4 + + + +


SECTION 3

GR

OO

VE

D IP

SP

IPE

VA

LVE

S3

AGS Tee-Type Strainer

+ Quoted on application.* Vic-Strainer Series W730 AGS standard components include ductile iron body, access cap and coupling (with Grade "E" EPDM gas-ket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details.Series W730 supplied with an NPT tap and plug to accomodate a drain or blow-down valve.† Contact Victaulic for application and pricing information. 6 mesh screens standard for 355,6 - 406,4 mm and 4 mesh for 457,0 - 610,0 mm.NOTE: AGS products in sizes 355,6 - 610,0mm are designed for the new Advanced Groove System (AGS), which uses deeper and wider, wedge-shaped grooves compared to the traditional Victaulic grooved system.Style 733 Grooved End Flow Sensors

‡ l/min (gallons per minute) flow, system parameters, system name and related information is required when ordering.+ Quoted on application.Threaded or Sweat End Flow Sensors

‡ l/min (gallons per minute) flow, system parameters, system name and related information is required when ordering.+ Quoted on application.

AGS Tee-Type Strainer

Style W730

Series W730

O.D.[mm]

Series W730 AGS Tee-Type StrainerWgt.Each[kg]

Standard*

Price Each

Standard.Basket OnlyPrice Each

Fine Mesh†Basket OnlyPrice Each

355,6 136,1 €8600,62 + +406,4 158,8 10240,39 + +457,2 181,4 12278,51 + +508,0 256,3 16151,31 + +610,0 376,5 19986,42 + +

Grooved End Flow Sensors‡

VenturiStyle 733

VenturiStyle 733

Orifice PlateStyle 734

O.D.[mm]

VenturisStyle 733

Orifice Platewith Steel Plate

Style 734

Orifice Plate with 304Stainless Steel Plate

Style 734SWgt.Each

PriceEach

Wgt.Each

PriceEach

Wgt.Each

PriceEach

73,0 1,1 + 0,9 + 0,9 +88,9 1,6 + 1,2 + 1,2 +

114,3 2,5 + 1,8 + 1,8 +141,3 3,1 + 2,6 + 2,6 +168,3 5,0 + 3,3 + 3,3 +219,1 8,8 + 5,4 + 5,4 +273,0 13,6 + 8,1 + 8,1 +323,9 25,4 + 9,6 + 9,6 +355,6 32,7 + 10,0 + 10,0 +406,4 69,4 + 13,8 + 13,8 +457,0 88,9 + 15,9 + 15,9 +508,0 111,1 + 20,6 + 20,6 +610,0 165,6 + 28,4 + 28,4 +762,0 232,2 + - - - -

Threaded or Sweat End Flow Sensors‡

Style 733 Style 734

O.D.[mm]

VenturiBrass-Threaded

Style 733

Orifice/IndicatorBrass-Female x Female Threaded

Style 734 XF-F/FWgt. Each

[kg]PriceEach

Wgt. Each[kg]

PriceEach

16,7 0,7 + 0,3 +26,9 0,9 + 0,4 +33,7 1,1 + 0,9 +42,4 1,4 + 0,7 +48,3 1,6 + 0,8 +60,3 3,1 + 0,9 +


62

SECTION 3

GR

OO

VE

D IP

SP

IPE

VA

LVE

S3

Style 150 Mover® Expansion Joint

Victaulic® Style 150 Expansion Joints are supplied fully assembled, with a Grade "E" gasket for water services up to +110˚C. For other gaskets and services consult Victaulic. Style 150 Expansion Joints are supplied with plain ends for installation using two Roust-A-Bout® Style 99 couplings, or with grooved ends for installation using Victaulic® Coupling Style HP-70 or 07 Zero-Flex® couplings.Galvanized version available and quoted on application.NOTE: Style 155 Expansion Joints in sizes 26,9 to 610 mm are available. Style 155 Expansion Joints are non-cancellable and non-returnable.+ Quoted on application.Mover® with Metal Bellows

Victaulic® Style 150 Expansion Joints are supplied fully assembled, with a Grade "E" gasket for water services up to +110˚C. For other gaskets and services consult Victaulic. Style 150 Expansion Joints are supplied with plain ends for installation using two Roust-A-Bout® Style 99 couplings, or with grooved ends for installation using Victaulic® Coupling Style HP-70 or 07 Zero-Flex® couplings.Galvanized version available and quoted on application.NOTE: Style 155 Expansion Joints in sizes 26,9 to 610 mm are available. Style 155 Expansion Joints are non-cancellable and non-returnable.+ Quoted on application.Style 47 Clearflow Dielectric Waterway

* Clearflow is a registered trademark of Perfection Corp.+ Quoted on application.

Mover® Expansion JointStyle 150

O.D.[mm]

MaximumAvailable

Expansion[mm]

Wgt.Each[kg]

PriceEach

60,3 76 7,3 €508,2876,1 76 + +88,9 76 12,2 596,94

114,3 76 18,1 967,30139,7 76 + 1178,99141,3 76 24,9 1178,99165,1 76 + 1304,67168,3 76 34,0 1304,67

Mover® with Metal BellowsStyle 151

O.D.[mm]

MaximumAvailable

Expansion[mm]

Wgt.Each[kg]

PriceEach

219,1 +/-50 10,02 €965,00273 +/-50 17,58 1215,00

323,9 +/-50 22,20 1515,00

Clearflow* Dielectric WaterwayStyle 47

Grooved x Threaded

Threaded x Threaded

O.D.[mm]

E to ELength[mm]

UnitsPer Box

PricePer Unit

Wgt.Per Box

[kg]Price

Per BoxGROOVED x THREADED

33,7 102 25 €19,37 3,9 +42,4 102 10 26,18 2,9 +48,3 102 10 30,25 3,4 +60,3 102 10 + 4,5 +73,0 152 6 + 4,3 +88,9 152 6 + 5,4 +

101,6 152 6 + 6,3 +114,3 152 6 98,47 12,2 +

THREADED x THREADED16,7 76 25 + 2,0 +26,9 76 25 €12,20 2,6 +33,7 102 25 19,37 3,9 +42,4 102 10 26,18 2,9 +48,3 102 10 30,25 3,4 +60,3 102 10 70,14 4,5 +73,0 152 6 + 4,3 +88,9 152 6 + 5,4 +

101,6 152 6 + 6,3 +114,3 152 6 + 12,2 +


SECTION 3

GR

OO

VE

D IP

SP

IPE

VA

LVE

S3

Style 47-GG Steel (IPS) to Copper (CTS)


Steel (IPS) to Copper (CTS) Transition FittingStyle 47-GG

(60,3 - 88,9) (114,3 - 219,1)Grooved x Grooved

O.D.[mm]

E to E[mm]

Unitsper Box

Priceper Unit

Wgt. per Box[kg]

Price per Box

Steel(IPS)

Copper(CTS)

60,3 54,0 102 10 + 8,2 +73,0 66,7 157 6 + 15,4 +88,9 79,4 157 6 + 12,7 +

114,3 104,8 157 6 + 16,3 +141,3 130,2 157 1 + 3,6 +168,3 155,6 157 1 + 5,4 +219,1 206,4 157 1 + 7,3 +


64

SECTION 3

GR

OO

VE

D IP

SP

IPE

VA

LVE

S3


SECTION 4

SP

AR

EP

AR

TS

4

Section 4SpareParts4

Spare PartsSection 4 - Spare Parts


66

SECTION 4

SP

AR

EP

AR

TS

4

SPARE PARTS

Standard Gaskets

+ Quoted on application.† Style 770 couplings only.Special Gaskets


Standard GasketsFor Styles 07, 75, 77and 78

O.D.[mm]

"E"EPDM

or"T"

Nitrile

FlushSeal"E"

O.D.[mm]

"E"EPDM

or"T"

Nitrile

FlushSeal"E"

O.D.[mm]

"E"EPDM

or"T"

Nitrile

FlushSeal"E"

26,9 €6,61 €11,83 133,0 €16,30 €42,72 355,6 €50,50 €85,4933,7 6,61 12,93 139,7 16,30 42,72 381,0 60,33 +42,4 6,81 13,63 141,3 16,30 42,72 406,4 70,17 93,1248,3 7,39 13,78 152,4 + + 457,0 84,84 118,3560,3 7,39 14,02 159,0 17,88 43,40 508,0 130,52 139,9873,0 8,96 17,35 165,1 17,88 + 559,0 151,12 +76,1 8,96 17,35 168,3 17,88 43,47 610,0 181,45 192,9388,9 9,84 17,35 219,1 24,57 45,27 711,0† 182,21 +

101,6 12,56 23,41 254,0 31,46 + 762,0† + +108,0 12,56 23,64 273,0 31,46 58,39 813,0† + +114,3 12,56 23,64 304,8 36,60 + 914,0† + +127,0 25,87 + 323,9 36,60 69,91 1.067,0† + +

Special GasketsFor Styles 07, 75, 77and 78

O.D.[mm]

"L"Silicone

"O"Fluoro-

elastomer

"V"Black

Neoprene

Flush-Seal®

WhiteNitrile

Flush-Seal®

"L"Silicone

Flush-Seal®

"T"Nitrile

Flush-Seal®

"O"Fluoro-

elastomer26,9 €23,50 €47,50 + + + €13,63 +33,7 30,45 51,27 €12,54 €38,40 + 13,63 +42,4 32,79 59,32 14,38 + €40,97 13,63 +48,3 37,50 68,30 16,00 40,02 46,89 13,78 +60,3 39,99 68,30 16,47 42,75 52,78 14,02 €98,2573,0 41,55 89,35 16,99 62,81 55,71 17,35 +88,9 43,53 91,09 17,93 64,49 58,17 17,35 106,82

101,6 57,76 115,77 + + + 23,41 +108,0 + 149,28 + + + + +114,3 49,30 149,75 21,35 72,04 67,76 23,64 +141,3 57,47 158,09 83,10 77,55 90,90 42,72 +168,3 67,08 176,28 22,44 104,28 109,56 43,47 206,72219,1 79,97 296,59 25,42 174,65 169,31 45,27 407,43273,0 96,13 387,36 28,07 198,97 181,95 58,39 +323,9 115,58 536,16 60,34 203,59 191,91 69,91 654,11355,6 138,28 691,51 + 208,33 + + +406,4 164,26 1103,73 + + 201,58 + +457,0 193,52 1622,47 + 227,61 207,13 + +508,0 226,04 1698,71 + + 268,83 + +559,0 261,84 1742,11 + + + + +610,0 301,52 1792,45 + 1008,80 299,00 + +711,0 343,27 + + + + + +


SECTION 4

SP

AR

EP

AR

TS

4

Standard "E" or "T" Gaskets

+ Quoted on application.Steel Rings


Gaskets For Styles 741 and 743

+ Quoted on application.Gaskets For Styles 90, 99


Standard "E" or "T" GasketsFor Style 750

O.D.[mm]

Run x Brch.

Price Each O.D.[mm]

Run x Brch.

Price Each

"E" "T" "E" "T"60,3 x 33,7 €6,90 €6,90 114,3 x 76,1 €12,83 €13,0060,3 x 48,3 6,90 11,36 114,3 x 88,9 13,28 13,2873,0 x 60,3 9,10 9,05 141,3 x 114,3 16,04 16,0476,1 x 60,3 + + 165,1 x 88,9 + +88,9 x 60,3 10,79 10,79 168,3 x 114,3 17,99 33,9688,9 x 73,0 10,79 + 168,3 x 141,3 19,74 +88,9 x 76,1 + + 219,1 x 165,1 + +

114,3 x 60,3 12,70 12,70 219,1 x 168,3 21,85 +114,3 x 73,0 12,81 +

Steel RingsFor Style 750

O.D.[mm]

Run x Brch. Price Each

O.D.[mm]

Run x Brch. Price Each60,3 x 33,7 + 114,3 x 76,1 €4,5460,3 x 48,3 €3,46 114,3 x 88,9 4,7073,0 x 60,3 + 141,3 x 114,3 5,0076,1 x 60,3 3,58 165,1 x 88,9 +88,9 x 60,3 3,71 168,3 x 114,3 5,3488,9 x 73,0 3,86 168,3 x 141,3 +88,9 x 76,1 4,02 219,1 x 165,1 +

114,3 x 60,3 4,25 219,1 x 168,3 5,82114,3 x 73,0 4,36

Standard "E" or "T" GasketsFor Style 005

O.D.[mm]

"E"EPDM

O.D.[mm]

"E"EPDM

60,3 €7,39 139,7 €16,3073,0 8,96 141,3 16,3076,1 8,96 159,0 17,8888,9 9,84 165,1 17,88

108,0 12,56 168,3 17,88114,3 12,56 219,1 24,57133,0 16,30

GasketsFor Styles 741 and 743

O.D.[mm]

"E"EPDM

"T"Nitrile

"L"Silicone

O.D.[mm]

"E"EPDM

"T"Nitrile

"L"Silicone

60,3 €5,82 €5,82 + 165,1 €13,63 €13,63 +73,0 7,02 7,02 + 168,3 14,38 14,38 €90,4073,0 7,02 7,02 + 219,1 19,74 19,74 95,7376,1 19,50 19,50 + 273,0 25,47 25,47 117,6388,9 7,72 7,72 €60,57 323,9 29,61 29,61 +

108,0 36,02 + + 355,6 39,28 + +114,3 10,18 10,18 65,83 406,4 43,86 + +133,0 39,83 + + 457,0 79,84 + +139,7 15,70 15,70 + 508,0 96,53 + 440,85141,3 12,70 12,70 + 610,0 108,29 + +

GasketsFor Styles 90, 99 and 995 Couplings

O.D.[mm]

"E"EPDM

"T"Nitrile

"O"Fluoro-

elastomerO.D.[mm]

"E"EPDM

"T"Nitrile

"O"Fluoro-

elastomer60,3 €9,68 €9,68 €109,56 168,3 €24,67 €24,67 €373,5173,0 10,25 10,25 + 219,1 32,76 32,76 558,6476,1 11,63 11,63 + 273,0 41,88 41,88 743,7688,9 11,36 11,36 146,86 323,9 43,40 43,40 +

101,6 16,09 + + 355,6 81,30 + +114,3 17,12 17,12 210,15 406,4 96,70 + +141,3 20,03 20,29 355,33


68

SECTION 4

SP

AR

EP

AR

TS

4

Special Gaskets For Style HP-70ES

Lubricant

To ensure easy assembly and service of all your Victaulic® installations, be sure to include plenty of Victaulic® Lubricant with every order. The following chart provides a rough gauge of quantities recommended, based on the number of units sold.

Special GasketsFor Style HP-70ES

O.D.[mm]

"E" or "T"EndSeal®

60,3 €13,7073,0 17,3388,9 19,22

114,3 24,38168,3 35,66219,1 48,32273,0 79,23323,9 90,12

Lubricant LUBRICANT Price EachTUBE

€6,94 125 GRQUART

35,37 907 GRCARTON

711,28 144 TUBES

LUBRICANT USAGE GUIDE LUBRICANT USAGE GUIDE LUBRICANT USAGE GUIDE

Size ofGasket[mm]

Numberof Gaskets Size of

Gasket[mm]

Numberof Gaskets Size of

Gasket[mm]

Numberof Gaskets

PerTube

PerQuart

PerTube

PerQuart

PerTube

PerQuart

60,3 55 400 219,1 13 100 406,4 6 4588,9 36 270 273,0 11 80 457,0 5 35

114,3 26 200 323,9 8 60 508,0 4 30168,3 17 125 355,6 7 50 610,0 3 20


SECTION 4

SP

AR

EP

AR

TS

4


+ Quoted on application.Fit Gaskets For Style 96

Flange Parts For Style 741, 743Vic-Flange® Adapters

+ Quoted on application.§ PN10* PN16

Standard "E" or "T" GasketsFor Styles 920 and 920N

O.D.[mm]

Run x Brch. Style

Price Each O.D.[mm]

Run x Brch. Style

Price Each

"E" "T" "E" "T"60,3 x 21,3 920N €4,46 €4,90 114,3 x 60,3 920N €4,46 €4,9060,3 x 26,9 920N 4,46 4,90 114,3 x 73,0 920 7,37 8,1160,3 x 33,7 920N 4,46 4,90 114,3 x 76,1 920 7,37 8,1160,3 x 42,4 920N 4,46 4,90 114,3 x 88,9 920 7,37 8,1160,3 x 48,3 920N 4,46 4,90 141,3 x 48,3 920 7,37 10,6973,0 x 21,3 920N 4,46 4,90 141,3 x 60,3 920 7,37 8,1173,0 x 26,9 920N 4,46 4,90 141,3 x 73,0 920 7,37 8,1173,0 x 33,7 920N 4,46 4,90 141,3 x 76,1 920 7,37 8,1173,0 x 42,4 920N 4,46 4,90 141,3 x 88,9 920 8,23 11,5373,0 x 48,3 920N 4,46 4,90 159,0 x 48,3 920N 4,46 4,9076,1 x 21,3 920 4,46 4,90 159,0 x 60,3 920N 4,46 4,9076,1 x 26,9 920 4,46 4,90 159,0 x 73,0 920 7,37 8,1176,1 x 33,7 920 4,46 4,90 159,0 x 108,0 920 9,33 11,3976,1 x 42,4 920 4,46 4,90 165,1 x 48,3 920 7,37 10,6976,1 x 48,3 920 4,46 4,90 165,1 x 60,3 920 7,37 8,1188,9 x 21,3 920N 4,46 4,90 165,1 x 73,0 920 7,37 8,1188,9 x 26,9 920N 4,46 4,90 165,1 x 76,1 920 7,37 8,1188,9 x 33,7 920N 4,46 4,90 165,1 x 88,9 920 8,23 11,5388,9 x 42,4 920N 4,46 4,90 165,1 x 114,3 920 9,33 11,3988,9 x 48,3 920N 4,46 4,90 168,3 x 42,4 920N 4,46 4,9088,9 x 60,3 920N 4,46 4,90 168,3 x 48,3 920N 4,46 4,90

108,0 x 42,4 920N 4,46 4,90 168,3 x 60,3 920N 4,46 4,90108,0 x 48,3 920N 4,46 4,90 168,3 x 73,0 920 7,37 8,11108,0 x 60,3 920N 4,46 4,90 168,3 x 76,1 920 7,37 8,11108,0 x 73,0 920 7,37 8,11 168,3 x 88,9 920 8,23 11,53108,0 x 88,9 920 7,37 8,11 168,3 x 114,3 920 9,33 11,39114,3 x 21,3 920N 4,46 4,90 219,1 x 60,3 920 8,23 17,90114,3 x 26,9 920N 4,46 4,90 219,1 x 73,0 920 8,23 17,90114,3 x 33,7 920N 4,46 4,90 219,1 x 76,1 920 8,23 17,90114,3 x 42,4 920N 4,46 4,90 219,1 x 88,9 920 8,23 11,53114,3 x 48,3 920N 4,46 4,90 219,1 x 114,3 920 20,05 22,11

Flange PartsFor Style 741, 743 Vic-Flange® Adapters

FlangeSize[mm]

Style 741 DINFLANGE WASHERS

Style 741 ANSIFLANGE WASHERS

PN10/16Plated

PN10/16Stainless Steel

316Ti Plated60,3 €7,39 €20,45 €7,8673,0 - - 8,9676,1 9,43 20,45 -88,9 10,67 20,45 9,96

108,0 12,56 26,81 -114,3 12,81 26,81 13,63133,0 15,10 26,81 -139,7 15,27 26,81 -141,3 - - 15,27168,3 18,25 34,45 18,25219,1 24,57 43,61 24,75273,0 34,02 73,14 34,20323,9 42,24 78,04 45,17323,9 42,24 + 45,17


70

SECTION 4

SP

AR

EP

AR

TS

4

Metal Liners For Styles 77, 75

Plated Trackhead Bolts and Nuts

+ Quoted on application.Electrical Continuity ClipsFor Style 75 and 77 couplings

Metal LinersFor Styles 77, 75 and 78 Couplings(Type 304 Stainless Steel)

O.D.[mm]

PriceEach

O.D.[mm]

PriceEach

60,3 €18,82 273,0 €31,5773,0 19,70 323,9 47,1488,9 19,70 406,4 86,71

114,3 19,70 508,0 181,14141,3 25,63 610,0 192,32168,3 23,66 762,0 +219,1 29,61

Plated Trackhead Bolts and Nuts

Size[mm]

Size[Inches] Price Each

10 x 51 ³/₈ x 2 €2,8612 x 64 ¹/₂ x 2¹/₂ 3,1212 x 70 ¹/₂ x 2³/₄ 2,9812 x 76 ¹/₂ x 3 +12 x 83 ¹/₂ x 3¹/₄ 2,9816 x 70 ⁵/₈ x 2³/₄ 3,9116 x 83 ⁵/₈ x 3¹/₄ 3,1316 x 89 ⁵/₈ x 3¹/₂ 4,29

16 x 121 ⁵/₈ x 4³/₄ 3,2820 x 108 ³/₄ x 4¹/₄ 4,5620 x 127 ³/₄ x 5 +20 x 146 ³/₄ x 5³/₄ +20 x 159 ³/₄ x 6¹/₄ +22 x 127 ⁷/₈ x 5 7,0422 x 140 ⁷/₈ x 5¹/₂ 11,9322 x 165 ⁷/₈ x 6¹/₂ 7,3924 x 89 1 x 3¹/₂ 8,02

24 x 127 1 x 5 8,0224 x 140 1 x 5¹/₂ 11,9524 x 152 1 x 6 8,0224 x 165 1 x 6¹/₂ 8,0227 x 102 1¹/₈ x 4 16,1027 x 140 1¹/₈ x 5¹/₂ +30 x 89 1¹/₄ x 3¹/₂ +

30 x 140 1¹/₄ x 5¹/₂ +35 x 146 1³/₈ x 5³/₄ +38 x 114 1¹/₂ x 4¹/₂ +38 x 146 1¹/₂ x 5³/₄ +41 x 152 1⁵/₈ x 6 +45 x 152 1³/₄ x 6 +48 x 152 1⁷/₈ x 6 +


SECTION 4

SP

AR

EP

AR

TS

4


NOTE: Continuity clips are designed to ensure electrical continuity from pipe to pipe when using Victaulic flexible couplings Style 75 or Style 77. Only one clip per coupling is required. It is imperative that the correct size clip is used for the appropriate bolt, and that the clip is installed under the bolt head, not under the nut.

Electrical Continuity Clipsfor Style 75 and 77 couplings

Clip Size

Clip Marking

for use with flexible couplings

Price Each[mm] [inches]Style 75 O.D.

[mm]Style 77 O.D.

[mm]M10 ³⁄₈ ³⁄₈" VE 48,3 - 60,3 33,7 €5,86M12 ¹⁄₂ ¹⁄₂" VE 73,0 - 114,3 42,4 - 88,9 5,86M16 ⁵⁄₈ ⁵⁄₈" VE 133,0 - 168,3 108,0 - 114,3 5,86M20 ³⁄₄ ³⁄₄" VE 219,1 133,0 - 168,3 5,86M24 1 1" VE - 219,1 - 457,0 +


72

SECTION 4

SP

AR

EP

AR

TS

4


SECTION 5

PR

OD

UC

TS

FO

R P

LAIN

EN

DIP

S S

TE

EL

PIP

E5

Section 5Products for Plain EndIPS Steel Pipe5

Plain End CouplingsSection 5 - Plain End Couplings


74

SECTION 5

PR

OD

UC

TS

FO

R P

LAIN

EN

DIP

S S

TE

EL P

IPE

5

PRODUCTS FOR PLAIN END STEEL PIPE

Style 99 Roust-A-Bout® Coupling

Roust-A-Bout® couplings are for use with plain or beveled end steel pipe and plain-end fittings.Couplings consist of ductile or malleable iron housing, Grade "E" or "T" synthetic gasket and steel bolts and nuts.Couplings with gaskets of other compounds quoted on application.Roust-A-Bout® Style 99 Couplings are designed for use with plain end pipe and fittings only. Nuts must always be tightened to full torque specifications during installation.† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.+ Quoted on application.@ALWAYS SPECIFY GASKET GRADE WHEN ORDERING.

Roust-A-Bout® CouplingStyle 99

PIPECOMPLETE COUPLING †

With "E" or "T" Gasket PlatedBolt & Nut

Size[mm]

O.D.[mm]

Wgt.Each[kg]


48,3 1,6 €40,69 €51,87 12 x 6460,3 2,4 40,69 51,87 16 x 8373,0 2,6 53,76 68,51 16 x 8376,1 2,0 58,56 51,87 12 x 7088,9 4,0 55,03 70,15 20 x 108

101,6 4,8 82,76 96,67 20 x 108114,3 5,9 67,54 86,10 20 x 108139,7 4,1 126,45 149,18 20 x 127141,3 7,9 126,45 161,12 22 x 127168,3 10,1 145,20 185,06 24 x 152165,1 10,5 145,20 171,34 24 x 152219,1 15,8 222,36 283,39 22 x 127273,0 21,9 290,75 370,54 22 x 127323,9 27,2 323,64 412,50 24 x 165355,6 40,4 641,51 756,99 24 x 165406,4 47,6 704,02 830,76 24 x 165


SECTION 5

PR

OD

UC

TS

FO

R P

LAIN

EN

DIP

S S

TE

EL

PIP

E5
PRODUCTS FOR PLAIN END HDPE PLASTIC PIPE
Style 995 HDPE Coupling

+ Quoted on application.* Coupling for High Density Polyethylene or Polybutylene Pipe. Refer to PB-234 for details.§ Special bolts required.† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.NOTE: See Section 5 for spare parts pricing.Style 90/99 gaskets fit Style 995 couplings.# Supplied with T-bolts and rocker washer.Style 995M HDPE Metric Coupling

+ Quoted on application.§ Contact Victaulic for special bolt/nut requirements.† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.

(See Section 2 for Style 920 Mechanical-T® Outlets)

HDPE CouplingStyle 995


"E" or "T" Gasket PlatedBolt & Nut

Size[Inches]

O.D.[mm]

Wgt.Each[kg]


60,3 1,6 €46,37 + ¹/₂ x 2¹/₂88,9 3,5 63,57 + ¹/₂ x 2³/₄

114,3 5,3 95,37 + ¹/₂ x 2³/₄141,3 6,8 130,47 + ⁵/₈ x 3¹/₄168,3 7,4 140,71 + ⁵/₈ x 3¹/₄219,1 11,3 154,15 + ⁵/₈ x 3¹/₄273,0 17,0 257,29 + ³/₄ x 5323,9 22,2 336,32 + ⁷/₈ x 5355,6 36,7 809,95 + ⁷/₈ x 5 §

406,4 45,5 + + 1 x 7 #

457,0 57,7 + + 1 x 7 #

508,0 64,5 + + 1 x 7 #

HDPE Metric CouplingStyle 995M

PIPEO.D.

COMPLETE COUPLING †

"E" or "T" Gasket Bolt & NutSize[mm][mm]

Wgt. Each[kg] Price Each

90,0 3,8 €71,38 M12 x 70 Lg.110,0 5,5 112,62 M12 x 70 Lg.140,0 6,8 130,59 M16 x 83 Lg.160,0 7,8 139,50 M16 x 83 Lg.200,0 9,7 169,50 M16 x 83 Lg.225,0 10,9 204,16 M16 x 83 Lg.250,0 17,0 308,83 M20 x 127 Lg.280,0 17,6 349,37 M20 x 127 Lg.315,0 20,7 374,96 M22 x 127 Lg.355,0 36,7 830,18 §

400,0 45,5 + M24 x 178 Lg.450,0 57,7 + M24 x 178 Lg.500,0 64,5 + M24 x 178 Lg.


76

SECTION 5

PR

OD

UC

TS

FO

R P

LAIN

EN

DIP

S S

TE

EL P

IPE

5

Style 994 Flange Adapter for HDPE Pipe

+ Quoted on application.HDPE Flange has ductile iron housing. Standard flange bolts, for ANSI Class 125 or 150 mating flanges must be supplied by the installer.† Surcharge for flange adapter supplied without gasket. Contact Victaulic for pricing.Style 997 Transition Coupling

+ Quoted on application.The HDPE Transition coupling is supplied with painted or galvanized ductile iron housing, Grade "E" gasket (Grade "T" available) and plated track head bolts and nuts.† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.NOTE: See Section 5 for spare parts pricing. Style 77 gaskets fit Style 997 couplings.

Flange Adapter for HDPE PipeStyle 994

PIPE HDPE FLANGE COMPLETE † "E" or "T"Gasket

Price EachO.D.[mm]

Wgt.Each[kg]

PriceEach

114,3 5,7 + +168,3 7,8 + +219,1 14,0 + +

Transition CouplingStyle 997(HDPE to steel)


"E" or "T" Gasket PlatedBolt & Nut

Size[Inches]

O.D.[mm]

Wgt.Each[kg]

Price EachStandard Galv.

60,3 1,4 + + ³/₈ x 288,9 3,0 €63,88 + ¹/₂ x 2³/₄

114,3 4,0 91,83 + ¹/₂ x 2³/₄141,3 5,2 102,64 + ⁵/₈ x 3¹/₄168,3 6,7 + + ⁵/₈ x 3¹/₄219,1 9,8 + + ⁵/₈ x 3¹/₂273,0 15,6 + + ⁷/₈ x 5¹/₂323,9 17,0 + + ⁷/₈ x 5¹/₂


SECTION 6

CO

PA

RIT

ET

M C

ON

NE

CT

ION

FO

RG

RO

OV

ED

CO

PA

RIT

ET

M T

UB

ING

6

Section 6

Coparite

TM Connection for

Grooved Coparite

TM tubing6

CopariteTM

ProductsSection 6 - Coparite

TM Products


78

SECTION 6

CO

PA

RIT

ET

M C

ON

NE

CT

ION

FO

RG

RO

OV

ED

CO

PA

RIT

ET

M T

UB

ING

6

GROOVED PIPING SYSTEM FOR COPARITETM TUBING

Style 606 Coupling for Coparite

TM Tubing

† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.NOTE: See Section 5 for spare parts pricing.+ Quoted on application.

Coparite

TM Fittings


Coupling for CopariteTM TubingStyle 606

ULCUL¨

EN1057 STANDARD

O.D.[mm]

Wgt.Each[kg]

COMPLETECOUPLING †

Price Each

SPARE PARTSPlated

Bolt & NutSize [mm]

54,0 0,7 €15,54 M10 x 5164,0 0,9 16,83 M10 x 5166,7 0,9 16,18 M10 x 5176,1 1,1 18,96 M12 x 7088,9 1,4 21,17 M12 x 70

108,0 1,7 24,90 M12 x 70133,0 2,5 38,38 M16 x 83159,0 2,9 47,21 M16 x 83

US STANDARD

O.D.[mm]

Wgt.Each[kg]

COMPLETECOUPLING †

Price EachBolt & NutSize [mm]

54,0 0,7 €18,85 2 - ³/₈ x 266,7 0,9 19,74 2 - ³/₈ x 279,4 1,0 20,39 2 - ¹/₂ x 2³/₄

104,8 1,5 25,88 2 - ¹/₂ x 2³/₄130,2 2,2 55,66 2 - ⁵/₈ x 3¹/₄155,6 2,6 66,82 2 - ⁵/₈ x 3¹/₄206,4 3,3 + 2 - ⁵/₈ x 4¹/₄

CopariteTM Fittings

Nr. 620 Nr. 660

EN1057 STANDARD

O.D.[mm]

90˚ ELBOWNo. 610

45˚ ELBOWNo. 611

TEENo. 620

CAPNo. 660

Wgt.Each[kg]

PriceEach

Wgt.Each[kg]

PriceEach

Wgt.Each[kg]

PriceEach

Wgt.Each[kg]

PriceEach

54,0 0,4 €29,73 0,4 €25,57 0,5 €38,30 0,5 €25,7364,0 0,6 43,12 0,5 34,53 0,8 47,39 0,6 26,4166,7 0,6 46,57 0,5 34,53 0,8 43,89 0,6 35,3876,1 1,0 56,53 0,7 50,52 1,5 74,99 0,6 44,1388,9 1,7 80,68 1,4 75,65 1,5 99,78 0,6 49,35

108,0 1,8 151,34 1,5 141,28 2,8 154,35 1,1 53,14133,0 6,4 277,89 4,8 255,30 10,0 311,15 1,6 69,59159,0 9,1 401,66 5,9 312,83 13,2 523,77 1,9 98,16

US STANDARD

O.D.[mm]

90˚ ELBOWNo. 610

45˚ ELBOWNo. 611

TEENo. 620

CAPNo. 660

Wgt.Each[kg]

PriceEach

Wgt.Each[kg]

PriceEach

Wgt.Each[kg]

PriceEach

Wgt.Each[kg]

PriceEach

54,0 0,4 €29,73 0,4 €25,57 0,5 €38,30 0,5 €25,7366,7 0,6 46,57 0,5 37,29 0,8 47,39 0,6 35,3879,4 1,9 52,23 0,7 49,28 1,5 84,90 0,6 49,35

104,8 3,0 130,93 1,5 101,92 2,8 184,78 1,1 55,24130,2 6,8 361,49 4,5 332,09 8,4 647,04 1,6 78,14155,6 9,1 602,43 5,9 334,18 11,6 799,52 1,9 102,09206,4 11,8 901,61 7,1 901,61 20,4 1069,70 - +


SECTION 6

CO

PA

RIT

ET

M C

ON

NE

CT

ION

FO

RG

RO

OV

ED

CO

PA

RIT

ET

M T

UB

ING

6

No 660 Bronze (RG12) End Caps with Concentric Threaded Hole

No. 650 Coparite

TM Concentric Reducer

Bronze (RG12) End Caps with Concentric Threaded HoleNo. 660

O.D.[mm x inch]

Wgt. Each[kg]

PriceEach

54,0 x 1" 0,3 €65,4764,0 x 1" 0,3 81,0876,1 x 1" 0,3 90,6888,9 x 1" 0,6 90,7088,9 x 2" + 115,05

CopariteTM Concentric ReducerNo. 650

EN1057 STANDARDNo. 650 Grooved x Grooved

O.D.[mm]

End to End[mm]

Wgt. Each[kg]

PriceEach

64,0 x 54,0 + + +66,7 x 54,0 83/86 0,7 +76,1 x 54,0 64 0,5 €53,7776,1 x 64,0 64 0,5 53,7776,1 x 66,7 64 0,5 53,7788,9 x 54,0 + + 76,0488,9 x 64,0 + + +88,9 x 76,1 76 0,9 76,04

108,0 x 54,0 + + 93,38108,0 x 64,0 + + +108,0 x 66,7 76 0,9 93,38108,0 x 76,1 76 0,9 93,38108,0 x 88,9 76 + 93,38133,0 x 76,1 99 2,9 262,76

133,0 x 108,0 2,9 2,9 262,76159,0 x 54,0 + + +159,0 x 64,0 + + +159,0 x 66,7 + + +

159,0 x 108,0 99 2,9 307,54159,0 x 133,0 86 3,0 307,54

US STANDARDNo. 650 Grooved x Grooved

O.D.[mm]

End to End[mm]

Wgt. Each[kg]

PriceEach

66,7 x 54,0 83 0,5 €49,7979,4 x 54,0 64 0,4 53,7779,4 x 66,7 64 0,5 53,77

104,8 x 54,0 121 0,8 91,93104,8 x 66,7 76 0,9 91,93104,8 x 79,4 76 0,9 91,93130,2 x 79,4 99 2,9 +

130,2 x 104,8 86 2,9 262,76155,6 x 79,4 111 2,9 +

155,6 x 104,8 99 2,9 +155,6 x 130,2 86 3,0 307,55206,4 x 155,6 127 4,5 +


80

SECTION 6

CO

PA

RIT

ET

M C

ON

NE

CT

ION

FO

RG

RO

OV

ED

CO

PA

RIT

ET

M T

UB

ING

6

No. 652 Coparite

TM Concentric Reducer

Other sizes available upon request, contact Victaulic.

No. 625 Coparite

TM Reducing Tee

CopariteTM Concentric ReducerNo. 652

EN1057 STANDARDNo. 652 Grooved x Cup

Size[mm]

End toEnd[mm]

Cup[mm]

Wgt.Each[kg]

PriceEach

54,0 x 35,0 76 25 + +54,0 x 42,0 75 27 0,2 €29,0066,7 x 35,0 89 25 + 38,5966,7 x 42,0 88 27 0,3 36,28

US STANDARDNo. 652 Grooved x Cup

O.D.[mm]

End toEnd[mm]

Cup[mm]

Wgt.Each[kg]

PriceEach

54,0 x 28,5 69 23 0,2 €25,9554,0 x 35,0 76 25 0,2 28,3154,0 x 41,3 75 28 0,2 29,3266,7 x 28,5 83 23 0,4 34,2066,7 x 35,0 89 25 0,3 +66,7 x 41,3 88 28 0,3 45,8166,7 x 54,0 84 34 0,3 52,3479,4 x 41,3 93 28 0,5 54,2779,4 x 54,0 104 34 0,5 56,73

104,8 x 54,0 121 34 0,9 77,11


SECTION 6

CO

PA

RIT

ET

M C

ON

NE

CT

ION

FO

RG

RO

OV

ED

CO

PA

RIT

ET

M T

UB

ING

6

Other sizes available upon request, contact Victaulic.Dielectric Waterway Transition Fittings

CopariteTM

Reducing TeeNo. 625

ULCUL¨

EN1057 STANDARDNo. 625 Grooved x Grooved

O.D.[mm]

Wgt. Each[kg]

PriceEach

66,7 x 54,0 0,7 €31,7876,1 x 54,0 1,0 217,0276,1 x 66,7 1,1 219,68108 x 66,7 2,6 276,75

108,0 x 76,1 4,6 279,13133,0 x 54,0 + +133,0 x 64,0 + +133,0 x 76,1 2,5 502,11

133,0 x 108,0 4,5 570,33159,0 x 54,0 + +159,0 x 66,7 + +159,0 x 76,1 + +

159,0 x 108,0 4,4 686,78159,0 x 133,0 5,1 658,00

US STANDARDNo. 625 Grooved x Grooved x Grooved

O.D.[mm]

Wgt. Each[kg]

PriceEach

66,7 x 54,0 0,7 +79,4 x 54,0 1,0 +79,4 x 66,7 1,1 €272,40

104,8 x 54,0 2,4 276,89104,8 x 66,7 2,6 278,08104,8 x 79,4 2,8 279,39130,2 x 79,4 2,5 290,05

130,2 x 104,8 4,0 304,82155,6 x 66,7 3,0 313,95155,6 x 79,4 3,7 316,41

155,6 x 104,8 4,4 332,73155,6 x 130,2 5,1 337,81

Dielectric Waterway Transition FittingsFor CTS to IPS ConnectionsSee Section 3


82

SECTION 6

CO

PA

RIT

ET

M C

ON

NE

CT

ION

FO

RG

RO

OV

ED

CO

PA

RIT

ET

M T

UB

ING

6

No. 626 Coparite

TM Reducing Tee



CopariteTM Reducing TeeNo. 626

ULCUL¨

EN1057 STANDARDNo. 626 Grooved x Grooved x Cup

O.D.[mm]

Wgt. Each[kg]

PriceEach

54,0 x 35,0 0,6 +54,0 x 42,0 0,4 +66,7 x 35,0 0,8 +66,7 x 42,0 0,6 +76,1 x 35,0 0,9 +76,1 x 42,0 0,9 +

108,0 x 35,0 1,5 +108,0 x 42,0 1,6 +133,0 x 35,0 1,9 +133,0 x 42,0 2,2 +159,0 x 35,0 2,2 +159,0 x 42,0 2,3 +

US STANDARDNo. 626 Grooved x Grooved x Cup

O.D.[mm]

Wgt. Each[kg]

PriceEach

54,0 x 22,2 0,3 €55,2454,0 x 28,5 0,4 55,6854,0 x 35,0 0,4 58,5154,0 x 41,3 0,4 61,7866,7 x 28,5 0,5 +66,7 x 35,0 0,5 86,2666,7 x 41,3 0,6 84,1979,4 x 28,5 0,7 +79,4 x 35,0 0,8 127,9579,4 x 41,3 0,8 128,68

104,8 x 28,5 1,3 +104,8 x 35,0 1,4 +104,8 x 41,3 1,4 +


SECTION 6

CO

PA

RIT

ET

M C

ON

NE

CT

ION

FO

RG

RO

OV

ED

CO

PA

RIT

ET

M T

UB

ING

6

Style 641 Coparite

TM ConnectionVic-Flange® Adapters

'† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.For bolt and nut set pricing see Section 5.+ Quoted on application.Vic-Flange® adapters require a smooth, hard surface at the mating flange face for effective sealing. Some applications for which the Vic-Flange® adapter is otherwise well suited do not provide an adequate mating surface. In such cases, it is recommended that a phe-nolic (Type F) Flange Washer be inserted between the Vic-Flange® adapter and the mating flange to provide the necessary sealing surface.Typical applications where a Vic-Flange® Washer should be used are:1. When mating to a serrated flange: a flange gasket should be used adjacent to the serrated flange and then the Flange Washer is inserted between the Vic-Flange® adapter and the flange gasket.2. When mating to a wafer valve: where typical valves are rubber lined and partially rubber faced (smooth or not), the Flange Washer is placed between the valve and the Vic-Flange® adapter.3. When mating to a rubber faced flange: the Flange washer is placed between the Vic-Flange® adapters and the rubber faced flange.4. When mating C.I. flanges to IPS flanges: the Flange Washer is placed between the two Vic-Flange® adapters. If one flange is not a Vic-Flange® adapter (e.g., flanged valve), then a flanged gasket must be placed adjacent to that flange and the Flange Washer inserted between the flange gasket and the Vic-Flange® adapter.5. When mating to components (valves, strainer, etc.) where the component flange face has an insert: follow the same arrangement as in Application 1.


CopariteTM Connection Vic-Flange® AdaptersStyle 641Grooved to Flange Adapters to Grooved Pipe Adapters to ANSI Class 125 and 150 Flanges

EN1057 STANDARD

PIPEVIC-FLANGE ADAPTER

COMPLETE†SPAREPARTS

O.D.[mm]

Wgt.Each[kg]

PriceEach

GasketPriceEach

Vic-Flange®

Washers54,0 1,7 €54,41 + €7,9064,0 2,1 55,96 + 9,6066,7 2,1 55,96 + 9,6076,1 2,5 71,49 + 9,6088,9 2,8 82,49 + 10,36

108,0 3,1 90,28 + 9,96133,0 3,9 115,15 + 13,76159,0 4,5 152,47 + 13,41

US STANDARD

PIPEVIC-FLANGE ADAPTER

COMPLETE†SPAREPARTS

O.D.[mm]

Wgt.Each[kg]

PriceEach

GasketPriceEach

Vic-Flange®

Washers54,0 1,7 €58,95 + +66,7 2,1 60,21 + +79,4 2,5 74,38 + +

104,8 3,5 93,88 + +130,2 4,2 110,89 + +155,6 4,7 158,56 + +

CopariteTM Connection Butterfly ValvesSeries 608EPDM (Grade E) Disc(Fig. V - _ _ _ _ _ _- 362 _ _ - _ _ _ _)

EN1057 STANDARDO.D.[mm]

Two PositionHandle

Lever Lock withMemory Stop

66,7 €268,77 €325,4076,1 351,37 351,37

US STANDARDO.D.[mm]

Two PositionHandle

Lever Lock withMemory Stop

66,7 €268,77 €325,4079,4 337,54 337,54

104,8 - 477,96130,2 - 483,56155,6 - 491,04


84

SECTION 6

CO

PA

RIT

ET

M C

ON

NE

CT

ION

FO

RG

RO

OV

ED

CO

PA

RIT

ET

M T

UB

ING

6

† See numbering chart below.+ Quoted on application.

+ Quoted on application.Chain 11,49 EUR per m.† See numbering chart below.2" nut, in lieu of handwheel, available at no additional charge.Specify clear on order.Gear Operators available with both memory stop and chain wheel- add bothadders (3_ _ _ -24)†.

Valve Options

Series 608Gear

Operator

O.D.[mm]

BracketInsulation

[mm](3 _ _ 3 - _ _) †

66,7 +76,1 +79,4 +

104,8 +130,2 +155,6 +

Operator Options O.D.[mm]

Chain Wheel(3 _ _ _- 22)†

MemoryStop

(3 _ _ _- 21)†Wgt.Each

[kg]66,7 + + 1,676,1 + + 1,679,4 + + 1,6

104,8 + + 1,6130,2 + + 1,6155,6 + + 2,6


SECTION 7

PR

OD

UC

TS

FO

RG

RO

OV

ED

ALU

MIN

IUM

PIP

E7

Section 7Products ForGrooved Aluminium Pipe7

Aluminium ProductsSection 7 - Aluminium Products


86

SECTION 7

PR

OD

UC

TS

FO

RG

RO

OV

ED

ALU

MIN

IUM

PIP

E7

ALUMINIUM PRODUCTS FOR GROOVED END PIPE

Styles 77A and 78A Aluminium Coupling

Style 77-A couplings consist of aluminium (356T6 alloy) housings, Grade"T" or "E" synthetic gasket and plated steel bolts and nuts. Style 78 A couplings consist of aluminium (Tenzaloy) housings, Grade "T" or "E" synthetic gasket. Additional gasket@compounds and couplings sizes priced on application. NOTE: See Section 5 for spare part pricing.+ Quoted on application.ALWAYS SPECIFY GASKET GRADE WHEN ORDERING.Aluminium Fittings

Fittings made of aluminium (356T6 alloy). Additional sizes and items priced on application.(sw) Segmentally welded. + Quoted on application.

Aluminium CouplingStyles 77A and 78A

Modell 77A

Modell 78A



O.D.[mm]

Wgt.Each[kg]

PriceEach

Plated Bolt & NutSize[mm]

33,7 0,6 €29,44 2 - M10 x 5148,3 0,5 29,44 2 - M12 x 6460,3 0,6 36,22 2 - M12 x 6473,0 0,7 54,10 2 - M12 x 7088,9 0,8 58,63 2 - M12 x 70

114,3 1,4 64,55 2 - M16 x 83141,3 2,3 159,77 2 - M20 x 108168,3 2,7 189,72 2 - M20 x 108219,1 4,5 208,15 2 - M22 x 127

ALUMINUM SNAP-JOINT COUPLINGS - Style 78A60,3 0,5 €55,10 -

273,0 4,5 372,03 -

Aluminium Fittings

O.D.[mm]

90˚ ELBOWNo. 10A

45˚ ELBOWNo. 11A

TEENo. 20A

CAPNo. 60A

Wgt.[kg]

PriceEach

Wgt.[kg]

PriceEach

Wgt.[kg]

PriceEach

Wgt.[kg]

PriceEach

33,7 0,1 €48,49 0,1 + 0,2 €53,59 0,1 +48,3 0,2 53,64 0,1 + 0,3 59,27 0,1 +60,3 0,3 69,16 0,2 + 0,5 76,44 0,1 +73,0 0,5 89,53 0,3 + 0,7 98,94 0,1 +88,9 0,7 92,03 0,6 + 1,0 101,69 0,2 +

114,3 1,4 94,75 0,9 €94,75 1,9 104,70 0,4 €94,75141,3 2,4 + 1,5 (sw) + 3,0 + 1,0 +168,3 3,0 106,70 2,4 + 4,1 184,66 1,4 106,70219,1 6,4 194,36 3,7 + 8,4 240,72 2,7 +


SECTION 7

PR

OD

UC

TS

FO

RG

RO

OV

ED

ALU

MIN

IUM

PIP

E7

Aluminium Reducers

+ Quoted on application.Aluminium Adapter Nipples

Made of standard weight aluminium pipe. Special lengths priced on application.+ Quoted on application.

Aluminium Reducers

No. 50A

No. 52A

O.D.[mm]

Wgt.[kg]

No. 50APrice Each

No. 52APrice Each

48,3 x 33,7 0,1 + +60,3 x 33,7 0,1 + +60,3 x 48,3 0,1 + +88,9 x 33,7 0,3 + +88,9 x 60,3 0,3 + +88,9 x 73,0 0,2 + +

114,3 x 60,3 0,4 €70,78 +114,3 x 73,0 0,5 + +114,3 x 88,9 0,5 + +141,3 x 88,9 1,0 + +

141,3 x 114,3 1,0 + +141,3 x 114,3 2,7 + +141,3 x 168,3 2,7 + +

Aluminium Adapter Nipples

Grooved x ThreadedNo. 40A

Grooved x BeveledNo. 42A

Grooved x GroovedNo. 43A

O.D.[mm]

Length[mm]

Wgt.[kg]

PriceEach

33,7 76 0,1 +48,3 102 0,2 +60,3 102 0,2 +73,0 102 0,3 +88,9 102 0,4 +

114,3 152 0,7 +141,3 152 1,1 +168,3 152 1,5 €135,72219,1 152 2,3 +


88

SECTION 7

PR

OD

UC

TS

FO

RG

RO

OV

ED

ALU

MIN

IUM

PIP

E7


SECTION 8

PR

OD

UC

T F

OR

ST

AIN

LES

S S

TE

EL

PIP

E8

Section 8Product forStainless Steel pipe8

Stainless Steel ProductsSection 8 - Stainless steel Products


90

SECTION 8

PR

OD

UC

T F

OR

ST

AIN

LES

S S

TE

EL P

IPE

8

TYPE 316 STAINLESS STEEL COUPLINGS

Style 77-S - Flexible Coupling

† Coupling less gasket is additional. Contact Victaulic for details.Couplings available through 610mm; contact Victaulic for details.NOTE: See Section 5 for spare part pricing.+ Quoted on application.Style 475 - Lightweight Flexible

† Coupling less gasket is additional. Contact Victaulic for details.NOTE: See Section 5 for spare part pricing.+ Quoted on application.

Flexible CouplingStyle 77-S PIPE


"E" or "T" Gasket

COUPLING COM-

PLETE † With Flush-

Seal®

GasketPrice Each

SPARE PARTS

O.D.[mm]

Wgt.Each[kg]

Type 316PriceEach No.

BoltDimen-sions[mm]

PriceEach

26,9 0,6 €33,52 €38,75 2 10 x 51 +33,7 0,7 40,50 46,83 2 10 x 51 +42,4 1,1 41,00 47,83 2 12 x 64 +48,3 1,2 41,43 47,83 2 12 x 64 +60,3 1,4 46,98 53,62 2 12 x 64 +73,0 1,4 63,07 71,46 2 12 x 64 +88,9 2,1 75,82 83,33 2 12 x 70 +

114,3 3,6 103,22 114,30 2 12 x 70 +168,3 6,8 129,21 154,80 2 16 x 83 +219,1 11,8 376,74 397,45 2 20 x 108 +273,0 15,9 519,12 546,04 2 24 x 152 +323,9 17,7 550,15 583,47 2 24 x 165 +355,6 20,9 + + 2 24 x 89 +406,4 24,0 + + 4 24 x 89 +457,0 25,0 + + 4 24 x 89 +

Lightweight Flexible CouplingStyle 475

PIPE

COUPLINGCOMPLETE†

"E" or "T" Gasket

COUPLING COMPLETE† With Flush-

Seal®

GasketPrice Each

SPARE PARTS

O.D.[mm]

Wgt.Each[kg]

Type 316PriceEach

Stainless Steel Bolt & NutSize[mm]

PriceEach

33.7 0,7 €25,42 + M10 x 51 +42.4 0,9 30,00 + M10 x 51 +48.3 1,0 30,00 + M10 x 51 +60,3 0,8 30,00 + M10 x 51 +73,0 0,9 30,00 + M10 x 51 +76,1 0,9 43,68 + M10 x 51 +88,9 1,3 53,43 + M12 x 70 +

114,3 1,9 87,24 + M12 x 70 +139,7 2,2 103,43 + M12 x 70 +165,1 3,1 162,50 + M12 x 70 +


SECTION 8

PR

OD

UC

T F

OR

ST

AIN

LES

S S

TE

EL

PIP

E8

Style 489 - Rigid

† Coupling less gasket is additional. Contact Victaulic for details.NOTE: See Section 5 for spare part pricing.+ Quoted on application.Style 441 Stainless Steel Vic-Flange® Adapter

Note: - ANSI Rating Only


60,3 - 114,3 mm

139,7 - 323,9mm

PIPE

COUPLINGCOMPLETE†

"E" or "T" Gasket

COUPLING COMPLETE† With Flush-

Seal®

GasketPrice Each

SPARE PARTS

O.D.[mm]

Wgt.Each[kg]

Type 316PriceEach

Stainless Steel Bolt & NutSize[mm]

PriceEach

60,3 0,7 €30,01 + 10 x 64 +73,0 0,9 41,06 + 10 x 64 +76,1 0,9 41,06 + 10 x 64 +88,9 1,3 41,06 + 12 x 70 +

114,3 1,8 58,22 + 12 x 70 +139,7 + 194,69 + + +165,1 7,0 272,79 + 22 x 140 +168,3 6,6 272,79 + + +219,1 10,3 570,33 + + +273,0 12,9 671,77 + + +323,9 16,6 946,06 + + +

Stainless SteelVic-Flange® AdapterStyle 441

O.D.[mm]

Aprx. Weight Each[kg]

PriceEach

60,3 1,4 €48,2873,0 2,0 86,2588,9 2,2 77,88

114,3 3,1 126,18168,3 4,3 152,94


92

SECTION 8

PR

OD

UC

T F

OR

ST

AIN

LES

S S

TE

EL P

IPE

8

DUCTILE IRON COUPLINGS FOR STAINLESS STEEL PIPE

Style 89 Rigid Coupling for Stainless Steel Pipe

† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.+ Contact Victaulic for details.


PIPECOUPLING COMPLETE†

with "E" or "T" GasketCOUPLING

COMPLETE†

with "E" or "T" Flush-

Seal® GasketPrice Each

SPARE PARTS

O.D.[mm]

Wgt. Each[kg] Rilsan

Plated Bolt & Nut

Size[mm]

PriceEach

139,7 + €79,98 + + +168,3 7,3 89,85 + + +219,1 11,8 155,21 + + +273,0 14,9 245,08 + + +323,9 20,9 276,27 + + +


SECTION 8

PR

OD

UC

T F

OR

ST

AIN

LES

S S

TE

EL

PIP

E8
FITTINGS TYPE 316 STAINLESS STEEL SCHEDULE 10S
Stainless steel grooved end fittings listed are Schedule 10S Type 316. For Schedule 5S or 40 stainless fitting configurations contact Victaulic. Grooved adapter nipples are available. Contact Victaulic for pricing and availability.

Elbows

(c) Cast fittings, type 316 (CF8M) stainless steel.+ Contact Victaulic for details.Tees

(c) Cast fittings, type 316 (CF8M) stainless steel.+ Contact Victaulic for details.

ElbowsSchedule 10S 316L (A403)No. 410, No. 411

No. 410 No. 411

O.D.[mm]

90˚ Elbow-No. 410 45˚ Elbow-No. 411

C - E[mm]

Aprx.Wgt. Each

[kg]PriceEach

C - E[mm]

Aprx.Wgt. Each

[kg]PriceEach

60,3 (c) 83 0,5 €63,67 51 0,3 €52,1973,0 (c) 127 1,0 71,84 71 0,4 +76,1 (c) 95 1,1 52,26 57 0,9 47,01

88,9 114 1,2 65,33 51 0,6 58,76114,3 152 2,0 84,88 64 1,0 71,84139,7 191 + 148,13 79 + 143,66141,3 191 + + 83 + +168,3 229 5,0 280,80 95 2,5 182,83219,1 305 9,6 424,47 127 5,0 274,23273,0 381 16,6 907,92 159 8,4 680,98323,9 457 25,8 1378,24 191 12,9 1056,04

TeesSchedule 10S 316L (A403CR/S9)No. 410, No. 411

No. 420

O.D.[mm]

Tee – No. 420C - E[mm]

Aprx. Wgt. Each[kg]

PriceEach

60,3 (c) 83 0,6 €97,9573,0 (c) 78 1,0 +76,1 (c) 95 2,1 120,79

88,9 96 1,4 130,60114,3 114 2,2 176,30139,7 134 + 261,19141,3 124 + +168,3 150 5,3 372,23219,1 198 9,2 548,55273,0 226 15,6 797,21323,9 264 23,8 1181,71


94

SECTION 8

PR

OD

UC

T F

OR

ST

AIN

LES

S S

TE

EL P

IPE

8

Reducing Tees

(c) Cast fittings, type 316 (CF8M) stainless steel.+ Contact Victaulic for details.Reducing Tees with Female Threaded Outlet

* Manufactured from stainless steel type 316Ti+ Contact Victaulic for details.Flanged Adapter Nipples

& All sizes listed except 141,3 mm are supplied with an aluminum flange according to DIN 2642 PN 10/16 type C. Roll grooved nipples are ANSI B16.9 stub end 316L (1.4404) Schedule 10S, except for sizes 76,1 and 139,7 mm, which have a pressed collar NF E 29251 with welded nipple 316L (1.4404).† Pressure ratings listed are for flanged end. Pressure ratings on grooved end depend on coupling type installed. Contact Victaulic for details.‡ DIN flanged adapter nipples in sizes smaller than 219,1 mm are rated PN10/PN16. In sizes 219,1 mm and above, PN10 and PN16 flanged adapter nipples are different products; specify PN 10 or PN 16 clearly on order.* These sizes are also available as an aluminum ANSI B16.5 150 lbs lap joint flange with ANSI B16.9 stub end 316L (1.4404) Schedule 10S roll grooved nipple.

Reducing TeeNo. 425

No. 425

O.D.[mm]

Reducing Tee – No. 425

C - E Run[mm]

C - E Branch[mm]

Aprx.Wgt.Each

[kg]PriceEach

73,0 x 60,3 (c) 78 78 1,1 €110,6476,1 x 60,3 (c) 95 95 + 110,64

88,9 x 60,3 96 82 + 143,6088,9 x 73,0 96 82 1,4 143,6088,9 x 76,1 96 82 1,4 143,60

114,3 x 60,3 114 97 + 185,76114,3 x 73,0 114 97 + +114,3 x 76,1 114 97 + 185,76114,3 x 88,9 114 99 2,2 185,76139,7 x 88,9 134 111 + 260,23

139,7 x 114,3 134 117 + 260,23168,3 x 114,3 150 130 4,3 344,03219,1 x 168,3 198 168 8,4 873,93273,0 x 168,3 226 196 12,8 982,19273,0 x 219,1 226 218 14,2 982,19323,9 x 219,1 264 242 18,2 1411,21323,9 x 273,0 264 251 21,6 1411,21

Reducing Tees with Female Threaded OutletNo. 29Ti

No. 29Ti

O.D.[mm]

Reducing Tee with Female Threaded Outlet – No. 29Ti *

C - E Run[mm]

C - E Branch[mm]

Approx. Weight Each[kg]

PriceEach

60,3 x 1 1/2 105 83 + €171,2376,1 x 1 105 86 + 174,3776,1 x 2 105 99 + 177,5688,9 x 1 105 92 + 208,0188,9 x 2 105 106 + 208,01

114,3 x 1 105 105 + 228,31114,3 x 2 105 118 + 231,44

Flanged Adapter NipplesNo. 441N

No. 441N

O.D.[mm]

Flanged Adapter Nipple – No. 441N &

Length E-E[mm]

Approx. Wgt. Each[kg] Price Each

DIN PN10 DIN PN16ANSI Class

15060,3‡ 64 + €124,63 €124,63 -76,1‡ 64 + 144,11 144,11 -88,9‡ 64 + 166,84 166,84 -

114,3‡ 76 + 190,05 190,05 -139,7‡ 76 + 276,67 276,67 -141,3* 76 + - - €654,94168,3‡ 89 + 276,67 276,67 -219,1* 102 + 417,37 605,85 1152,09273,0* 127 + 627,16 842,41 2085,62323,9* 152 + 968,88 1216,95 3078,20


SECTION 8

PR

OD

UC

T F

OR

ST

AIN

LES

S S

TE

EL

PIP

E8

Concentric Reducers

(c) Cast fittings, type 316 (CF8M) stainless steel.+ Contact Victaulic for details.End Caps

(c) Cast fittings, type 316 (CF8M) stainless steel.† Threaded holes can be made concentric only. Other sizes are supplied with eccentric hole.Female Threaded Adapter Nipples

* BSPT thread

Concentric ReducersNo. 450

No. 450

O.D.[mm]

Concentric Reducer – No. 450

E - E[mm]

Aprx.Wgt. Each

[kg] Price Each73,0 x 60,3 (c) 127 0,5 +76,0 x 60,3 (c) 64 + €182,46

88,9 x 60,3 127 + 203,4288,9 x 73,0 127 0,7 +88,9 x 76,1 127 + 203,42

114,3 x 60,3 127 + 236,33114,3 x 73,0 127 + +114,3 x 76,1 127 + 236,33114,3 x 88,9 127 0,9 236,33139,7 x 88,9 127 + 296,16

139,7 x 114,3 127 + 296,16168,3 x 114,3 140 1,8 355,98168,3 x 139,7 140 1,9 355,98219,1 x 139,7 152 2,4 858,37219,1 x 168,3 152 3,2 858,37273,0 x 168,3 178 4,0 914,72273,0 x 219,1 178 5,2 914,72323,9 x 219,1 203 6,0 1558,46323,9 x 273,0 203 7,7 1558,46

End Caps with or without Eccentric Threaded HoleNo. 460

No. 460

O.D.[mm]

End Cap – No. 460Threaded Hole Size[inches]

Thickness T[mm]

Approx. Weight Each

[kg]

End Capwithout HolePrice Each

End Cap with Hole

Price Each60,3 1 1/4† 24 + €62,21 +76,1 2† 27 + 69,97 +88,9 2 26 0,5 73,85 €85,52

114,3 2 31 0,7 110,96 101,08139,7 1(c) 36 + 144,65 178,87139,7 2 36 + 144,65 178,87168,3 1(c) 45 1,8 185,56 217,80168,3 2 45 1,8 185,56 217,80219,1 1(c) 57 3,0 451,71 483,21273,0 2(c) 69 + 626,37 657,87323,9 2(c) 83 + 980,70 1012,20

Female Threaded Adapter NipplesNo. 480

No. 480

O.D.[mm x inches]

Female Threaded Adapter Nipple – No. 480Lenth E - E

[mm]Approx. Weight Each

[kg] Price Each60,3 x 2 70 + €141,21

76,1 2 1/2 70 + 163,32


96

SECTION 8

PR

OD

UC

T F

OR

ST

AIN

LES

S S

TE

EL P

IPE

8

STAINLESS STEEL BUTTERFLY VALVES

Series 763 Butterfly Valves

Series 726-S valves are available with electric, pneumatic and hydraulic actuators or chainwheels. Contact Victaulic for details.* Valve with gear operator requires additional lead time. Contact Victaulic for details.+ Quoted on application.Series 763 Butterfly Valves

Series 726-S valves are available with electric, pneumatic and hydraulic actuators or chainwheels. Contact Victaulic for details.* Valve with gear operator requires additional lead time. Contact Victaulic for details.+ Quoted on application.Series 763 Weights

Series 763 Butterfly Valves(Bare Valve and Lever Lock)EPDM (Grade "E") or Nitrile (Grade "T") Seat

O.D.[mm] Bare Valve

Valve withLever Lock

Valve with Lever Lock

and Stainless Steel Latch

Plate

Valve with Tamper Proof

Lever Lock

Valve with Tamper Proof

Lever Lock and Stainless

Steel Latch Plate

60,3 + €633,71 + + +73,0 + 726,01 + + +76,1 + 726,01 + + +88,9 + 823,36 + + +

114,3 + 932,57 + + +165,1 + + + + +168,3 + 1416,40 + + +219,1 + 2031,76 + + +273,0 + - - - -323,9 + - - - -

Series 763 Butterfly Valves(Gear Operator)EPDM (Grade “E”) or Nitrile (Grade “T”) Seat

O.D.[mm]

Valve with Aluminum Gear Oper-

ator

Valve with Aluminum

GearOperator

and Chain Wheel

Valve with Aluminum

GearOperator

andMemory

Stop

Valve with Aluminum

GearOperator, Memory Stop and

Chain Wheel

Valve with Stainless Steel Gear Operator

Valve with Stainless

Steel Gear Operator

and Chain Wheel

60,3 + + + + + +73,0 + + + + + +76,1 + + + + + +88,9 + + + + + +

114,3 €1062,95 + + + + +165,1 + + + + + +168,3 1604,64 + + + + +219,1 2229,12 + + + + +273,0 3540,46 + + + + +323,9 + + + + + +

Series 763 Weights O.D.[mm] Bare Valve

Valve with Lever Lock

Valve with Aluminum Gear

Operator

Valve with Stainless Steel Gear Operator

60,3 1,6 2,1 3,4 2,073,0 2,0 2,6 3,8 3,476,1 2,0 2,6 3,8 3,488,9 2,3 2,8 4,0 3,6

114,3 4,1 4,6 5,9 5,4165,1 11,18 12,9 15,1 14,6168,3 11,18 12,9 15,1 14,6219,1 18,6 19,7 21,9 21,4273,0 29,5 - 36,5 36,6323,9 43,1 - 50,1 50,1


SECTION 8

PR

OD

UC

T F

OR

ST

AIN

LES

S S

TE

EL

PIP

E8

Series 726-S

Series 726-S valves are available with electric, pneumatic and hydraulic actuators or chainwheels. Contact Victaulic for details.* Valve with gear operator requires additional lead time. Contact Victaulic for details.+ Quoted on application.Style 723-S - Three Port Diverter Valves

Ball Valve Numbering System

Grooved End Ball ValvesSeries 726-S

O.D.[mm]

Wgt. Each[kg]

Complete with Tamper Resistant Lock/Seal Option

Price EachComplete with Gear

Operator*(1226-16) (1226-20)

48,3 2,1 €185,50 €745,4860,3 3,4 249,52 823,9673,0 5,2 381,66 899,5876,1 + 331,01 899,5888,9 7,8 537,41 1133,72

(8226-16) (8226-20)114,3 20,0 €1162,23 €1673,80165,1 + 2465,61 2906,38168,3 37,3 2465,61 2906,38

B - 6 - 020 - 1 1 6 15

T ype Fig.No.

SizePressureRating Body Ball & Stem Seat Operator

B 014020024030040060

3 - 2.065 kPa6 - 4.135 kPa

1 - Iron2 - 316 Stainless Steel3 - Iron - Plastic Coated6 - Iron - Diverter Body7 - Iron - Diverter Body, Plastic Coated8 - 316 Stainless Steel, Diverter Body9 - Special*

2 - 316 Stainless Steel6 - Carbon Steel Chrome Plate7 - 316 Stainless Steel - 90˚ Diverter Ball8 - 316 Stainless Steel - 180˚ Diverter Ball9 - Special*

6 - Reinforced TFE7 - TFE**9 - Special*

00 - Bare15 - Two-Position handle16 - Two-Position handle with locking device20 - Gear operator21 - Gear operator with memory22 - Gear operator with chain wheel23 - Gear operator with AWWA square nut29 - Non-std. gear operator*VV - Pneumatic*WW - Electric*YY - Hydraulic*F0 - Fire Protection UnsupervisedF2 - Fire Protection Supervised

NOTES:* Details of operator and accessories are required.** Details of coating must be supplied with order.


98

SECTION 8

PR

OD

UC

T F

OR

ST

AIN

LES

S S

TE

EL P

IPE

8


SECTION 9

VIC

®-R

ING

SY

ST

EM

FO

RG

RO

OV

ED

IPS

ST

EE

L P

IPE

9

Section 9Vic®-Ring system forGrooved IPS Steel Pipe9

Vic®-Ring ProductsSection 9 - Vic®-Ring PIPING system


10

SECTION 9

VIC

®-R

ING

SY

ST

EM

FO

RG

RO

OV

ED

IPS

ST

EE

L PIP

E9

VIC®-RING PIPING SYSTEM

(With applied Vic®-Ring)PRICES DO NOT INCLUDE COST OF Vic®-Ring ADAPTERS.§ Grade "T" gaskets available. Contact Victaulic for details.

Style 22

NOTE: See Section 5 for spare part prices.+ Quoted on application.Style 31

Style 22 PIPECOMPLETE COUPLING

WITH "E" GASKET § SPARE PARTS

Vic®-RingO.D.[mm]

Wgt. Each[kg]

PaintedPrice Each

"E" Gasket Only

Price Each No.*

Bolt & NutSize

[Inches]432,6 + + + 4 1 x 5¹/₂532,6 + + + 4 1 x 3¹/₂610,0 + + + 4 1¹/₈ x 5¹/₂628,6 + + + 6 +787,4 + + + 6 1 x 5¹/₂914,4 + + + 6 1¹/₄ x 5¹/₂965,2 + + + 6 1¹/₂ x 5³/₄

1.612,9 + + + 10 1⁵/₈ x 6



Vic®-RingO.D.[mm]

Wgt. Each[kg]

PaintedPrice Each

"E" Gasket Only

Price Each No.*

Bolt & NutSize

[Inches]355,6 18,1 + + 4 1 x 3¹/₂406,4 27,7 + + 4 1 x 3¹/₂457,0 33,1 + + 4 1 x 3¹/₂508,0 39,5 + + 4 1¹/₈ x 4610,0 42,2 + + 6 1¹/₈ x 4762,0 73,5 + + 6 1¹/₈ x 4914,0 90,7 + + 6 1¹/₈ x 4

Standard price list in EUR, valid from 1 February 2007 until further notice.0

SECTION 9

VIC

®-R

ING

SY

ST

EM

FO

RG

RO

OV

ED

IPS

ST

EE

L P

IPE

9

Style 44

* Number of bolts equals number of housing segments supplied except 1.349,4 and 1.516,0 mm which have 8 segments, and 1.681,1 mm which have 10 segments, all double bolted.NOTE: See Section 5 for spare part prices.+ Quoted on application.Style 41

+ Quoted on application.* Number of bolts equals number of housing segments supplied except 1.797,1 mm which has 12 segments, all double bolted.NOTE: See Section 5 for spare part prices.



Vic®-RingO.D.[mm]

Wgt. Each[kg]

PaintedPrice Each

"E" Gasket Only

Price Each No.*

Bolt & NutSize

[Inches]134,9 3,6 + + 2 ⁵/₈ x 4190,5 5,0 + + 2 ⁵/₈ x 4247,6 7,7 + + 2 ³/₄ x 5304,8 10,4 + + 2 ³/₄ x 5361,9 14,1 + + 2 ⁷/₈ x 5¹/₂417,5 19,5 + + 4 1 x 3¹/₂469,9 28,6 + + 4 1 x 3¹/₂531,8 38,6 + + 4 1 x 3¹/₂581,0 40,8 + + 4 1¹/₄ x 5¹/₂689,0 48,5 + + 6 1¹/₄ x 3¹/₂857,2 102,1 + + 6 1¹/₂ x 5³/₄

1.020,7 122,5 + + 6 1¹/₂ x 5³/₄1.184,3 172,4 + + 8 1³/₄ x 61.349,4 233,6 + + 16 1³/₈ x 5³/₄1.516,0 279,0 + + 16 1¹/₂ x 5³/₄1.681,1 312,1 + + 20 1¹/₂ x 5³/₄



Vic®-RingO.D.[mm]

Wgt. Each[kg]

PaintedPrice Each

"E" Gasket Only

Price Each No.*

Bolt & NutSize

[Inches]787,4 80,7 + + 6 1¹/₈ x 5¹/₂838,2 93,0 + + 6 1¹/₈ x 5¹/₂

1.039,8 99,8 + + 6 1¹/₄ x 5¹/₂1.157,3 122,5 + + 8 1³/₈ x 5³/₄1.238,3 149,7 + + 8 1¹/₂ x 5³/₄1.320,8 176,9 + + 8 1⁵/₈ x 61.485,9 213,2 + + 8 1³/₄ x 61.643,0 258,6 + + 10 1⁷/₈ x 61.797,1 340,2 + + 24 1¹/₂ x 5³/₄


10

SECTION 9

VIC

®-R

ING

SY

ST

EM

FO

RG

RO

OV

ED

IPS

ST

EE

L PIP

E9


PIPE PREPARATION TOOLS

PIP

E P

RE

PA

RA

TIO

N T

OO

LS+

SP

AR

E P

AR

TS

10

Pipe Preparation ToolsPipe Preparation Tools+ Spare Parts10

Pipe Preparation ToolsSection 10 - Pipe Preparation Tools


10


PIP

E P

RE

PA

RA

TIO

N T

OO

LS+

SP

AR

E P

AR

TS

10

GROOVING MACHINES AND ACCESSORIES

VE270FSD Completely self-contained unit with integral gear motor, stabilizer, safety guards, safety foot switch and power cord/plug.The VE270FSD uses a 230V power source.The tool is supplied complete with 26,9 - 323,9 mm roll sets.The VE270FSD is also equipped with Victaulic Company’s patented, enhanced-tracking grooving rolls.

Tools

Spare Parts

DescriptionWeight Each

[kg] Tool PriceVE-270FSD Vic Easy Roll Groover (50 Hz/230 Volt) 154 €18350,48Full Option VE270FSD Vic Easy Roll Groover including pipe stand VAPS 112 21360,22

Description Size PriceUpper Roll Standard 60,3 - 168,3 €502,17Upper Roll Standard 219,1 - 323,9 506,70Lower Roll Standard 60,3 - 101,6 191,64Lower Roll Standard 114,3 - 168,3 241,98Lower Roll Standard 219,1 - 323,9 276,25Upper Roll "RX" Light Wall Stainless Steel 60,3 - 168,3 713,22Upper Roll "RX" Light Wall Stainless Steel 219,1 - 323,9 668,68Lower Roll "RX" Light Wall Stainless Steel 60,3 - 101,6 369,99Lower Roll "RX" Light Wall Stainless Steel 114,3 - 168,3 383,85Lower Roll "RX" Light Wall Stainless Steel 219,1 - 323,9 554,65Upper Roll Copper 60,3 - 168,3 679,62Upper Roll Copper 60,3 - 219,1 644,04Lower Roll Copper 60,3 - 168,3 230,95Lower Roll Copper 219,1 290,68Upper Roll Standard 26,9 - 48,3 571,47Lower Roll Standard 33,7 - 48,3 720,53Lower Roll Standard 26.9 843,25



PIP

E P

RE

PA

RA

TIO

N T

OO

LS+

SP

AR

E P

AR

TS

10

VE268 Fully-motorized, semi-automatic, electro-hydraulic tool complete with safety guards, safety foot switch and power cord/plug. The VE268 requires a 230/400V, 3 phase, 50 hertz power supply for operation and is equipped with a pipe stabilizer for 219,1 - 323,9 mm pipe sizes to prevent pipe sway. The tool is shipped fully assembled for standard grooving (26,9 - 323,9 mm pipe)* (219,1 - 323,9 mm rolls are installed, unless otherwise specified).

Tools

Spare Parts


[kg] Tool PriceVE-268 Vic Easy Roll Groover (400V 50 Hz) 333 €32632,46Full Option VE268 Vic Easy Roll Groover including pipe stand VAPS 112 35642,20



10


PIP

E P

RE

PA

RA

TIO

N T

OO

LS+

SP

AR

E P

AR

TS

10

VE272SFS The VE272SFS Portable Roll Groover mounts easily to a Ridgid 300 Power Drive.The VE272SFS is operated using a hand pump. Roll changes are quick and easy, without having to change main shafts and stabilizer. The VE272SFS is also equipped with Victaulic Company’s patent-ed, enhanced-tracking grooving rolls. The tool is supplied complete with 26,9 - 323,9 mm roll sets.

Tools

Spare Parts


[kg]Tool PriceTool

PriceVE272SFS Grv. Tool 109 €10140,43Full Option VE272FS Grv. Tool including pipe stand VAPS 112 13150,17




PIP

E P

RE

PA

RA

TIO

N T

OO

LS+

SP

AR

E P

AR

TS

10

VE416FSD VE416FSD tools are completely self-contained units with integral gear motor, safety foot switch and power cord/plug.VE416FSD uses a 230V power source.VE416FSD is supplied complete with 60,3 - 406,4 mm roll sets. It is equipped with a pipe stabilizer for168,3 - 406,4 mm pipe sizes to prevent pipe sway.

Tools

Spare Parts


[kg] Tool PriceVE-416 FSD Roll Grooving Machine 154 €19669,81Full Option VE416FSD Roll Grooving Machine including pipe stand VAPS 224 23545,24

Description Size PriceUpper Roll Standard 60,3 - 101,6 €156,36Upper Roll Standard 114,3 - 168,3 424,93Upper Roll Standard 219,1 - 406,4 283,05Lower Roll Standard 60,3 - 101,6 339,44Lower Roll Standard 114,3 - 168,3 256,72Lower Roll Standard 219,1 - 323,9 295,59Lower Roll Standard 355,6 - 406,4 330,93Upper Roll "RX" Light Wall Stainless Steel 60,3 - 101,6 218,48Upper Roll "RX" Light Wall Stainless Steel 114,3 - 168,3 413,65Upper Roll "RX" Light Wall Stainless Steel 219,1 - 406,4 395,95Lower Roll "RX" Light Wall Stainless Steel 60,3 - 101,6 329,67Lower Roll "RX" Light Wall Stainless Steel 114,3 - 168,3 334,40Lower Roll "RX" Light Wall Stainless Steel 219,1 389,71Lower Roll "RX" Light Wall Stainless Steel 355,6 - 406,4 468,46Upper Roll Copper 60,3 - 168,3 237,88Upper Roll Copper 219,1 384,86Lower Roll Copper 60,3 - 168,3 437,66Lower Roll Copper 219,1 432,62AGS Upper Roll Assembly 355,6 - 406,4 1171,67AGS Lower Roll 355,6 - 406,4 470,04AGS Upper Roll Assembly "RX" 355,6 - 406,4 1336,04AGS Lower Roll "RX" 355,6 - 406,4 607,06416 AGS 14-16 Retrofit Kit 355,6 - 406,4 391,48AGS Kit "RX" 355,6 - 406,4 2323,56


10


PIP

E P

RE

PA

RA

TIO

N T

OO

LS+

SP

AR

E P

AR

TS

10

VE414MC Fully-motorized, automatic, electro-hydraulic tool complete with safety guards, safety foot switch and power cord/plug. The VE414MC requires a 230/400V, 3 phase, 50 hertz power supply for operation and is equipped with a pipe stabilizer for 219,1 - 406,4 mm pipe sizes to prevent pipe sway. The tool is shipped fully assembled for standard grooving (60,3 - 406,4 mm pipe)* (219,1 - 323,9 mm rolls are installed, unless otherwise specified).

Tools

Spare Parts


[kg] Tool PriceVE414MC Roll Grooving Tool 333 €33353,20Full Option VE414MC Roll Grooving Tool including pipe stand VAPS 224 37228,63

Description Size PriceUpper Roll Standard 60,3 - 101,6 €156,36Upper Roll Standard 114,3 - 168,3 424,93Upper Roll Standard 219,1 - 406,4 283,05Lower Roll Standard 60,3 - 101,6 339,44Lower Roll Standard 114,3 - 168,3 256,72Lower Roll Standard 219,1 - 323,9 295,59Lower Roll Standard 355,6 - 406,4 330,93Upper Roll "RX" Light Wall Stainless Steel 60,3 - 101,6 218,48Upper Roll "RX" Light Wall Stainless Steel 114,3 - 168,3 413,65Upper Roll "RX" Light Wall Stainless Steel 219,1 - 406,4 395,95Lower Roll "RX" Light Wall Stainless Steel 60,3 - 101,6 329,67Lower Roll "RX" Light Wall Stainless Steel 114,3 - 168,3 334,40Lower Roll "RX" Light Wall Stainless Steel 219,1 389,71Lower Roll "RX" Light Wall Stainless Steel 355,6 - 406,4 468,46Upper Roll Copper 60,3 - 168,3 237,88Upper Roll Copper 219,1 384,86Lower Roll Copper 60,3 - 168,3 437,66Lower Roll Copper 219,1 432,62AGS Upper Roll Assembly 355,6 - 406,4 1171,67AGS Lower Roll 355,6 - 406,4 470,04AGS Upper Roll Assembly "RX" 355,6 - 406,4 1336,04AGS Lower Roll "RX" 355,6 - 406,4 607,06416 AGS 14-16 Retrofit Kit 355,6 - 406,4 391,48AGS Kit "RX" 355,6 - 406,4 2323,56



PIP

E P

RE

PA

RA

TIO

N T

OO

LS+

SP

AR

E P

AR

TS

10

VE436MC Fully-motorized, automatic, electro-hydraulic tool complete with safety guards, safety foot switch and power cord/plug. The VE436MC requires a 230/400V, 3 phase, 50 hertz power supply for operation and is equipped with a pipe stabilizer for 219,1 - 610,0 mm pipe sizes to prevent pipe sway. The tool is shipped fully assembled for standard grooving (114,3 - 610,0 mm pipe). (219,1 - 323,9 mm rolls are installed, unless otherwise specified).

Tools


[kg] Tool PriceVE436MC Roll Grooving Tool 680 €74635,45Full Option VE436MC Roll Grooving Tool including pipe stand VAPS 224 78510,88

Description Size PriceUpper Roll Standard 114,3 - 168,3 €689,85Upper Roll Standard 219,1 - 323,9 403,51Upper Roll Standard 355,6 - 406,4 379,07Upper Roll Standard 559,0 - 610,0 403,64Upper Roll Standard 711,0 - 914,0 394,38Lower Roll Standard 114,3 - 168,3 477,09Lower Roll Standard 219,1 - 323,9 616,64Lower Roll Standard 355,6 - 406,4 592,45Lower Roll Standard 559,0 - 610,0 617,08Lower Roll Standard 711,0 - 914,0 922,13Upper Roll "RX" Light Wall Stainless Steel 114,3 - 168,3 695,89Upper Roll "RX" Light Wall Stainless Steel 219,1 - 323,9 477,16Upper Roll "RX" Light Wall Stainless Steel 355,6 - 406,4 451,08Upper Roll "RX" Light Wall Stainless Steel 457,0 - 508,0 455,61Upper Roll "RX" Light Wall Stainless Steel 559,0 - 610,0 455,11Upper Roll "RX" Light Wall Stainless Steel 660,0 - 914,0 472,31Lower Roll "RX" Light Wall Stainless Steel 114,3 - 168,3 467,27Lower Roll "RX" Light Wall Stainless Steel 219,1 - 323,9 670,82Lower Roll "RX" Light Wall Stainless Steel 355,6 - 406,4 683,17Lower Roll "RX" Light Wall Stainless Steel 457,0 - 508,0 830,65Lower Roll "RX" Light Wall Stainless Steel 559,0 - 610,0 703,20Lower Roll "RX" Light Wall Stainless Steel 660,0 - 914,0 696,46AGS Upper Roll 355,6 - 610,0 382,41AGS Lower Roll 355,6 - 610,0 624,07AGS Kit 355,6 - 610,0 1171,29


11


PIP

E P

RE

PA

RA

TIO

N T

OO

LS+

SP

AR

E P

AR

TS

10

VE108H The VE108H tools are completely self-contained units with integral motor, safety guard, safety foot switch and power cord/plug. VE108H uses a 230V power source, The tool is supplied complete with 42,4 - 168,3 mm roll sets.

Tools

Spare Parts

VE106 Vic Groove-N-Go

The VE106 Vic Groove-N-Go is a light, portable and easy to operate light-duty roll grooving tool with an integral motor/drive unit, safety foot switch and power plug. It uses a 230V power source and is supplied complete with 42,4 - 168,3 mm carbon steel roll sets.

Tools

Spare Parts


[kg] Tool PriceVE108H Roll Grv. Tool HANDPMP220V 85 €11029,38Full Option VE108H Roll Grv. Tool including VEPS-6 12856,80

Description Size PriceUpper Roll Standard 33.7 €391,13Upper Roll Standard 42,4 - 48,3 349,06Upper Roll Standard 60,3 - 168,3 294,97Upper Roll Standard 114,3 - 168,3 318,76Upper Roll Standard 219.1 319,01Lower Roll Standard 33.7 218,82Lower Roll Standard 42,4 - 48,3 227,83Lower Roll Standard 60,3 - 168,3 230,35Lower Roll Standard 114,3 - 168,3 372,01Lower Roll Standard 219.1 351,04Upper roll "RX" Light Wall Stainless Steel 60,3 - 101,6 743,93Upper roll "RX" Light Wall Stainless Steel 114,3 - 168,3 749,36Lower Roll "RX" Light Wall Stainless Steel 60,3 - 101,6 959,32Lower Roll "RX" Light Wall Stainless Steel 114,3 - 168,3 968,37


[kg] Tool PriceVE106 Vic Groove-N-Go 64 €7735,35Full Option VE106 Vic Groove-N-Go including pipe stand VEPS-6 9562,77

Description Size PriceUpper Roll 42,4 - 168,3 €101,69Lower Roll 42,4 - 101,6 401,57Lower Roll 42,4 - 101,6 481,50



PIP

E P

RE

PA

RA

TIO

N T

OO

LS+

SP

AR

E P

AR

TS

10

GROOVERS AND ACCESSORIES

VE226 B/S/M/C/BSS/MSS

VE226 is designed for use with a standard 3/8" square drive for roll feed with operator supplied ratchet wrench to roll groove 26,9 - 168,3 mm steel, stainless steel, aluminum, PVC and copper tube. Includ-ed are the 3/8" sqare drive, feeler gauges and an allen wrench for depth stop setting. Built-on mount fits Ridgid 300® power drives (other drive mounts available, including Oster 310, Ridgid 535, Ridgid 1224 and Ridgid 1822).

Specify VE226B for steel, stainless steel, aluminum and PVC pipe 26,9 - 48,3 mm.Specify VE226S for steel, stainless steel, aluminum and PVC pipe 42,4 - 168,3 mm.Specify VE226M for steel, stainless steel, aluminum and PVC pipe 60,3 - 168,3 mm.Specify VE226C for copper tube 60,3 - 168,3 mm.Specify VE226BSS for lightwall stainless steel pipe 26,9 - 48,3 mm.Specify VE226MSS for lightwall stainless steel pipe 60,3 - 168,3 mm.

Tools

VE46 VE46 is designed for manual grooving of 101,6 - 168,3 mm steel, stainless steel, aluminum and PVC.

Tools

VE12 VE12 is designed for manual grooving of 26,9 - 60,3 mm steel, stainless steel, aluminum and PVC pipe.

Tools


[kg] Tool PriceVE-226B Roll Grooving Machine 18 €2052,47VE-226S RI300 Roll Grooving Machine 18 2052,47VE-226M Roll Grooving Machine 18 2052,47VE-226C DIN ROLL GRVR DINC 18 2052,47VE-226BSS ROLL GRVR 026-048 18 2052,47VE-226MSS ROLL GRVR 060-168 18 2052,47


[kg] Tool PriceVE-46 Grooving Tool SCH40 4-6 13 €1881,45Combo Kit VE26/VE46 3 177,03


[kg] Tool PriceVE12 In Line Groover 1-2" 7,5 €1539,37


11


PIP

E P

RE

PA

RA

TIO

N T

OO

LS+

SP

AR

E P

AR

TS

10

VE26 S/C/SS VE26 is designed for manual grooving of 60,3 - 168,3 mm steel, stainless steel, aluminum, PVC and copper tube.

Specify VE26CDIN for copper tube 60,3 - 168,3 mm.Specify VE26SS for lightwall stainless steel pipe 60,3 - 168,3 mm.

Tools

VG28GD Includes tool set for grooving 60,3 - 219,1 mm standard steel pipe, crate, operating instructions, tool bit removal kit, 10"" extension bar, depth stop adjustment tools, and one extra 60,3 - 101,6 mm and 219,1 mm standard groove steel pipe tool bits.

Tools

VG824 Includes tool set for grooving 8 - 24" standard steel pipe, crate, operating instructions, tool bit removal kit, wrench and one extra 8 - 24" standard groove steel pipe tool bit.

Tools

VG-1 Vic-Groover VG-1 tools are designed for manual or power cut grooving of a single size steel, stainless steel, aluminum or PVC pipe, ranging from 26,9-219,1 mm. Tools are supplied with a ratchet handle for manual operation. Tools 60,3 mm and larger are supplied with a power yoke. VG-1 is supplied with chisel for steel pipe. Chisels for other pipe materials can be supplied; contact Victaulic.

Tools


[kg] Tool PriceVE26S (Steel Pipe) 10 €1539,37VE26C (Copper Pipe) 10 1539,37VE26SS (Stainless Steel Pipe) 10 1957,90VE26/VE46 Combo Kit 3 177,03


[kg] Tool Price VG-28GD Vic-Adj. Cut-Groover 20 €8979,66


[kg] Tool PriceVG-824 Vic-Adj. Cut-Groover 40 €15379,08


[kg] Tool PriceCut Groover for 26,9 mm Pipe 4,9 €1282,79Cut Groover for 33,7 mm Pipe 5,0 1282,79Cut Groover for 42,4 mm Pipe 5,4 1282,79Cut Groover for 48,3 mm Pipe 5,4 1282,79Cut Groover for 60,3 mm Pipe 5,4 1282,79Cut Groover for 73,0 mm Pipe 7,3 1282,79Cut Groover for 101,6 mm Pipe 11,3 1282,79Cut Groover for 114,3-168,3 mm Pipe 12,0 1282,79Cut Groover for 219,1 mm Pipe 20,4 1282,79



PIP

E P

RE

PA

RA

TIO

N T

OO

LS+

SP

AR

E P

AR

TS

10

POWER MULE (External Power Source)

Electrical motor, gear driven, 2 hp power source for all Victaulic cut grooving tools with 1"" drive con-nection, integral safety foot switch and reversible motor.(requires a 230V, 3 phase, 50 hertz power supply for operation )

Tools

VAPS 112 Vic-Easy Adjustable Pipe Stands are portable and self-standing units that permit free pipe rotation and traversing on ball transfers. Turnstile design allows pipe to be spun around for grooving of both pipe ends without dismounting pipe from stand.They are designed for direct use with Vic-Easy roll grooving.

tools: VE268, VE270FSD, VE272SFS

Tools

VAPS 224 Vic-Easy Adjustable Pipe Stands are portable and self-standing units that permit free pipe rotation and traversing on ball transfers. Turnstile design allows pipe to be spun around for grooving of both pipe ends without dismounting pipe from stand. They are designed for direct use with Vic-Easy roll groov-ing tools: VE416FS/FSD, VE414, VE424MC, VE436MC.

Tools

VAPS 3036PS Vic-Easy Adjustable Pipe Stands are portable and self-standing units that permit free pipe rotation and traversing on ball transfers. They are designed for direct use with Vic-Easy roll grooving tools: VE424MC and VE436MC.

Tools


[kg] Tool PricePower Mule 230V 1PH 50 HZ 100 €16334,51


[kg] Tool PriceVAPS 112 77 €3326,55


[kg] Tool PriceVAPS 224 142 €4079,40


[kg] Tool PriceVAPS 3036PS 142 €4350,20


11


PIP

E P

RE

PA

RA

TIO

N T

OO

LS+

SP

AR

E P

AR

TS

10

VEPS-6 Adjustable Pipe Stands are portable and self-standing units that permit free pipe rotation and travers-ing on ball transfers. Turnstile design allows pipe to be spun around for grooving of both pipe ends without dismounting pipe from stand.

They are designed for direct use with roll grooving tools: VE108H;VE801A.

Tools

VHCT Includes three-piece hole cutting tool (Base, drill motor and feed assembly), hole saws, arbor assem-bly, coupon remover, 2 pilot drills with coupon retaining springs and operating instructions. Requires grounded 230V power source.

Tools

HCT 904 The HCT 904 is a one-piece hole cutting tool, designed to cut holes up to 69,9 mm. Requires a ground-ed 230V power source.

Tools

VCT1 VCT1 Manual handles 114,3 - 610,0 mm pipe up to 12,7 mm thick. A worm gear drive crank handle provides smooth, manual travel, easy control and accurate cutting. Tools are supplied with one each #00, #0, and #1 acetylene tip. Other tips are available for propane, MAPP and other gases. Tools are supplied with tip cleaner and lighter.

Tools


[kg] Tool PriceVEPS-6 Pipe Support 20 €1923,60


[kg] Tool PriceVHCT Hole Saw 18,4 €4815,26


[kg] Tool PriceHCT-904 Hole Cutting Tool 20 €3441,24


[kg] Tool PriceVCT1 Pipe Cut-Off Tool 4-24" 20 €4621,93


TERMS AND CONDITIONS OF SALE

1. ACCEPTANCE: No contract shall be valid unless accepted in writing by seller. Verbal orders as well as deviations of our general terms and conditions of sale are not valid unless accepted in writing. Seller's delivery consists only of the goods, documents and services as specified in the quotation. Acceptance of a quotation by Buyer includes also his acceptance of Seller's general terms and conditions of sales and the present terms and conditions supersede any contrary conditions of Buyer.

2. VALIDITY: Unless otherwise agreed, Seller's quotations are valid for 30 days. After this period they are subject to confirmation.

3. SHIPPING TERMS: EX WORKS. Except as stated in our Terms and Conditions of Sale, all taxes, levies, duties, charges and expenses payable at or after the time of delivery with respect to the goods shall be borne by the Buyer.

4. MINIMUM INVOICE: A minimum charge of 100 EUR will be made for any single order.

5. RISK OF LOSS AND DAMAGE: Unless otherwise stated in the order acknowledgement, delivery shall take place ex-factory Nazareth, Belgium at which time risk of loss shall pass to the Buyer. Upon the written request of Buyer, Seller will, without any responsibility, arrange for insurance of shipments against loss or damage in transit but in Buyer's name and at his expense.

6. PAYMENT: Unless otherwise stated on the invoice, all payments due shall be made in USD to Seller's bank account. Unless otherwise agreed in writing, terms are net 30 days from invoice. Failure to pay within said period of time shall entail automatically without further notice at 2 % (two percent) increase per month on the unpaid amounts.

7. PROPERTY: The goods sold hereunder shall remain the property of Seller until paid for in full. If Buyer refuses delivery of the goods for any reason whatsoever, Seller reserves the right to store the goods in a warehouse of his choice at the risk and expense of Buyer.

8. DELIVERY: The quoted delivery times are for information only. Exceeding the delivery time by Seller does not entitle Buyer to indem-nities nor to refusal of the goods unless this has been agreed by registered mail by Seller. However, Seller shall use all reasonable effort to deliver the goods within the term specified in the acknowledgement of order. No liability shall result from delay in performance or non-performance caused by circumstances beyond the control of the Seller including but not limited to acts of God, fire, flood, war, government action, strikes, inability to obtain raw materials or delays of carriers. Quantities so affected may be eliminated from the contract without liability but the contract shall remain otherwise unaffected.

9. WARRANTY: Seller's products are warranted free of defects in materials or workmanship for one year from the date of original freight shipment. If returned within the warranty period, and upon factory inspection of the product, the cause is determined to be defective ma-terial or workmanship, then the Seller will at its option repair or replace the product at no cost to the Purchaser (or Owner) other than trans-portation. The Buyer's sole and exclusive remedy shall be for the repair or replacement of defective products. The Buyer agrees that no other remedy (including, but not limited to, incidental or consequential loss) shall be available to him. There are no other warranties ex-pressed or implied, except special written warranties covering some of Seller's products.

10. RETURNED MATERIAL: No returns of goods shipped are accepted unless Seller has previously been informed in writing of the reason for the return and has been given the opportunity to verify the defect or deficiency claimed to exist and has agreed to the existence thereof. If Seller accepts the return of goods for any reason other than their being defective or deficient, Seller reserves the right to make a charge for transportation and refinishing and, in addition, a handling charge equal to thirty percent (30 %) of the invoice price relating to the goods so returned.

11. PRODUCT CHANGE: The right to make changes in design or materials when necessary, without prior notice, is reserved.

12. DRAWINGS: Drawings and technical data included in Seller's quotations are for information only. They shall not be binding for con-struction unless certified. All such documents transmitted to Buyer remain Seller's property. They shall not be transmitted to third parties nor copied and shall not be used in conjunction with this contract.

13. INSPECTION: Buyer's inspectors or expeditors will only be received after appointment with Seller's Customer Service Department. It is Seller's policy not to accept any expediting on its vendors. In case inspection is required, goods will be invoiced two weeks after our advice "goods ready for inspection" and our invoice will be payable as per the conditions stated above from the date of issue of our invoice.

14. CHOICE OF LAW AND JURISDICTION: The validity, performance construction and effect of these terms and conditions shall be gov-erned by Belgian Law, including the Uniform Laws on International Sale of Goods which have been ratified by Belgium. Any litigation in connection with these terms and conditions shall be decided upon by the Court of Seller's principal place of business. Notwithstanding the foregoing, Seller may at its option bring a legal action against Buyer before the Court of the latter's principal place of business.

15. CLAIMS: Failure to give notice in writing of claim ten (10) days from the date of receipt shall constitute a waiver by Buyer on all claims in respect of such goods.


11

WARRANTYWe warrant all products to be free from defects in materials and workmanship under normal conditions of use and service. Our obligation under this warranty is limited to repairing or replacing at our option at our factory any product which shall within one year after delivery to original buyer be returned with transportation charges prepaid, and which our examination shall show to our satisfaction to have been de-fective.

THIS WARRANTY IS MADE EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IM-PLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE BUYER’S SOLE AND EXCLUSIVE REMEDY SHALL BE FOR THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS PROVIDED HEREIN. THE BUYER AGREES THAT NO OTHER REMEDY (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR LOST PROFITS, LOST SALES, INJURY TO PERSON OR PROPERTY OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL LOSS) SHALL BE AVAILABLE TO HIM.

Victaulic neither assumes nor authorizes any person to assume for it any other liability in connection with the sale of such products.

This warranty shall not apply to any product which has been subject to misuse, negligence or accident, which has been repaired or altered in any manner outside of Victaulic's factory or which has been used in a manner contrary to Victaulic’s instructions or recommendations. Victaulic shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives.

Items purchased by Victaulic and resold will have the original equipment manufacturer’s warranty extended to Victaulic customers.

EFFECTIVE SEPTEMBER 1, 2004Terms and Conditions of Sale


general price listonlinedata.cz/uhlik-spojky/cenik2007.pdf · 2007-05-03 · the progress we have...

Documents