gilson engineering catalog · 12 semnd cap astm a351-cf8 24 sb4ody bolt astm a492 30 32 tbeody...

2
CF-8000 Series Three Piece Ball Valves with Cavity Filler Designed with cavity fillers and quick disconnect ends, the CF-8000 Series is produced from 316/ CF8M stainless steel and have inside bore diameter polished to a sanitary finish. In sizes from 1/4” through 4” in full port design to provide unobstructed flow and better drainage Cavity filler available in a wide range of material selections Available with clamp, tube, flanged, NPT, socket weld, and butt weld ends. Standard with SST handle, SST bolts and internal polish to 180 grit; electropolish to 20 grit available Lockable handle option prevents accidental opening or closing of valve Designed for simple maintenance with in-line repair feature. Standard with anti-blowout stem Marwin Ball Valves Division of Richards Industries 3170 Wasson Road • Cincinnati, Ohio 45209 USA Phone 513-533-7340 • Toll-Free: 800-628-2583 • Fax 513-533-7343 E-Mail: [email protected] Three Piece Ball Valves Ordering Schematic BODY SEALS A PFA T Teflon OPTIONS CF Cavity Filler BODY MATERIAL 3 Stainless Stl. PACKING PORT DESIGN F Full Port END CONNECTIONS SEAT RINGS CF S 8 2 33 F T R S S SERIES/MODEL 8 8000 Series THRUST WASHER T Teflon STEM and BALL 3 3 Stainless Stl. T Teflon T Teflon R RPTFE BW Butt Weld C Clamp Ends F1 Flanged T Tube S Threaded SW Socket Weld

Upload: trinhnhan

Post on 24-May-2018

236 views

Category:

Documents


2 download

TRANSCRIPT

CF-8000 SeriesThree Piece Ball Valveswith Cavity FillerDesigned with cavity fillers and quick disconnectends, the CF-8000 Series is produced from 316/CF8M stainless steel and have inside bore diameterpolished to a sanitary finish.■ In sizes from 1/4” through 4” in full port design to

provide unobstructed flow and better drainage■ Cavity filler available in a wide range of material

selections

■ Available with clamp, tube, flanged, NPT, socketweld, and butt weld ends.

■ Standard with SST handle, SST bolts and internalpolish to 180 grit; electropolish to 20 grit available

■ Lockable handle option prevents accidental openingor closing of valve

■ Designed for simple maintenance with in-line repairfeature.

■ Standard with anti-blowout stem

Marwin Ball ValvesDivision of Richards Industries

3170 Wasson Road • Cincinnati, Ohio 45209 USAPhone 513-533-7340 • Toll-Free: 800-628-2583 • Fax 513-533-7343

E-Mail: [email protected]

Three Piece Ball Valves

Ordering Schematic

BODY SEALS

➙ ➚

A PFAT Teflon

OPTIONSCF Cavity Filler BODY MATERIAL

3 Stainless Stl.

PACKING

PORT DESIGNF Full Port

END CONNECTIONS

SEAT RINGS

CF S8 2 33 F T R S S

SERIES/MODEL8 8000 Series

THRUST WASHERT Teflon

STEM and BALL3 3 Stainless Stl.

T Teflon

T TeflonR RPTFE

BW Butt WeldC Clamp EndsF1 FlangedT TubeS ThreadedSW Socket Weld

CF-8000 Series Ball ValvesBulletin CF8000-0599 G

Technical Specifications

Seat Pressure/Temperature Chart

Dimensions

Marwin reserves the right to make revisions to its product, specifications,literature and related information wtihout notice.

eziS A B C D

"2/1 55.3 47.1 61.2 00.4

"4/3 40.4 00.2 03.5 63.2

"1 57.4 60.2 03.5 24.2

"2/1-1 05.5 01.3 06.7 47.3

"2 22.6 84.3 06.7 52.4

metI ytQ emaNtraP ISIA/MTSA

9 1 dnalG 613672AMTSA

01 1 tuNdnalG 403672AMTSA

11 1 eldnaH 403761AMTSA

21 1 revoCeldnaH lyniV

31 1 tuNeldnaH 403672AMTSA

41 4 rehsaW 403761AMTSA

61 4 tuN 403294AMTSA

71 1 ydoB M8FC-153AMTSA

Material Specifications

*Maximum operating pressure may be limited by end connection

eziS vCgnitarepO

euqroTsbL/nI

thgieW.sbL

"2/1 81 08 4.1

"4/3 04 511 0.2

"1 56 522 9.2

"2/1-1 051 593 7.5

"2 043 006 0.9

metI ytQ emaNtraP ISIA/MTSA

1 2 spaCdnE M8FC-153AMTSA

2 4 stloBydoB 403294AMTSA

3 2 teksaGydoB EFTP

4 2 sgniRtaeS EFTP

5 1 llaB 613672AMTSA

6 1 metS 613672AMTSA

7 1 rehsaWtsurhT EFTP

8 2 gnikcaPmetS EFTP