BLOOD GLUCOSE METER

Quick Reference Guide

QRG

for

0 48

2925

5001

(03)

200

8-06

Roche Diagnostics GmbH68298 Mannheim, Germanywww.accu-chek.com

0088

ACCU-CHEK und ACCU-CHEK GO are trademarks of Roche.

This Quick Reference Guide does not replace the comprehensive User’s Manual for your Accu-Chek Go meter. Please be sure to read the safety notices contained in the Instructions for use.

1.

2.

Beep tone

Press and hold down(for more than 3 seconds)

Time &Date Time-and-

date format

Hours

Minutes

Time

Date Year

Month

Day

Press briefly(turn off)

On(On1)

Off(OFF)

Acoustic Mode(On2)

Press briefly(turn off)

Target range

Off On

Value

Lower limit(LL)

Off On

Value

Upper limit(LH)

Press briefly(turn off)

Alarm clock function

Press briefly(turn off)

Press briefly(turn off)

Turning on the meterand starting Quickset-up

Off On

Hours

Minutes

AL1

AL2

AL3

AL4

h

g

f

e

a

b

c

d

l

k

j

g

i

Top and sides

a Þ button: turn on or off, start a set-up to change settings, save entries

b Liquid crystal display (LCD)

c < and > buttons: change settings (decre-ment and increment value, respectively), retrieve results, request averages

d Test strip guide – this is where you insert the test strip

e Measurement optics cover

f Test strip ejector

g Code chip

h Infrared port for downloading results to a PC, for instance

Bottom

g Code chip

i Code chip slot

j Type plate

k Battery compartment

l Battery (type CR 2032)

1 Set-up

2 When an average is displayed: number of days covered

3 LH or LL: target range setting (set-up)

4 Alarm clock function turned on. Flashing: optical signal during alarm

5 Test or averaging in progress

6 Unit of measurement for BG result

7 Flag indicating special result

8 Flashing: cue to allow test strip to draw up blood

9 Flashing: cue to insert test strip

10 Test strips are past their expiry date

11 Code number display. Flashing: code chip is missing

12 Target range setting (set-up). Flashing: result is outside the target range

13 Flag indicating performance check

14 Flashing: temperature is/was outside the permitted range

15 Beep tone or Acoustic Mode is turned on

16 Flashing: battery is running low

17 When an average is displayed: number of results included

18 Memory, averages or results download

19 Follows time in 12-hour format

20 Display messages

Code chip is missing. In memory: no results in memory, averaging not possible or result erased

Alarm setting (set-up)

Flashing: latest result being erased

End of set-up, self-test following test or download complete

In Quick set-up: group selected

Result >600 mg/dL (33.3 mmol/L)

Result <10 mg/dL (0.6 mmol/L)

Results download

Error messages

E-1 Test strip inserted incorrectly, test strip bent/moved, strong electromagnetic field

E-2 Code chip from another system, meter cannot read code chip, code chip defec-tive, code chip removed during test

E-4 Measurement optics dirty, test strip drew up blood too soon, test strip bent/moved, used strip inserted, test strip past its expiry date, new test strip inser-ted too soon after last test (while End was showing)

E-6 Test strip drew up too little blood, test strip drew up blood too soon, test strip bent/moved, battery empty, meter error, strong electromagnetic field

EEE Meter error

ttt Temperature too low or too high to test.

Quick set-up: Changing settings

Þ press and held down for more than 3 seconds at anytime = save, exit set-up and turn off

< > change with < or >ÞI press briefly = save or scroll

17

18

16

1514

13

7

6

54

20

3

2

1

11 10 9 8

19

12