gps source part · pdf filegps source part catalog iso 9001:2008 & as9100c compliant...
TRANSCRIPT
GPS Source Part Catalog
www.gpssource.com
ISO 9001:2008 & AS9100C Compliant 2013 - Qtr 3
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
1. Active Antenna with Bottom Connector for GPS L1 Signal
Example Part Number: L1A‐NF
2. Passive Antenna with Bottom Connector for GPS L1 Signal
Example Part Number: L1P‐NF
3. Active Antenna with Bottom Connector
for GPS L1 and L2 Signal Example Part Number: L1L2‐2GA‐NF
4. Passive Antenna with Bottom Connector for GPS L1 and L2 Signal
Example Part Number: L1L2‐2GP‐NF
5. Active Antenna with Side Connector
for GPS L1 and L2 Signal Example Part Number: L1L2‐S2GA‐SF
6. Passive Antenna with Side Connector
for GPS L1 and L2 Signal Example Part Number: L1L2‐S2GP‐SF
GPS Source Antenna Product Line
7. Active Antenna with Bottom Connector for GPS L1 and L2 Signal: Meets 3.3 Volt
requirements for DAGR GPS units.Example Part Number: L1L2‐2GAD‐1‐NF
8&9. Active Antenna with Side Connector for GPS L1 and L2 Signal: Meets 3.3 Volt
requirements for DAGR GPS units Example Part Number: L1L2‐S2GAD‐SF
10. RA‐1 ARINC ANTENNA GPS L1/L2 ACTIVE, 3.3 VOLTS POWER,
Side Connector, Magnet Mount; Rectangular PER: IS‐GPS‐164 Example Part Number: L1L2‐RA‐1‐SF
11. RA‐2 ARINC ANTENNA GPS L1/L2 ACTIVE, 3.3 VOLTS POWER;
Bottom Connector, Rectangular PER: IS‐GPS‐164 Example Part Number: L1L2‐RA‐2‐SF
12. Active Antenna for GPS L1/L2and GLONASS Signal
Example Part Number: L1L2G3GA‐NF
14. Active Antenna for GPS L1/L2, L5, GLONASS, Omnistar & Galileo Signal
Example Part Number: L1L25GO3GA‐NF
13. Passive Antenna for GPS L1, L2 and GLONASS Signal
Example Part Number: L1L2G3GP‐NF
15. Passive Antenna for GPS L1, L2, L5, GLONASS, Omnistar & Galileo Signal
Example Part Number L1L25GO3GP‐NF
Example Part Number: L1A ‐ PM ‐ NFProduct NameMount OptionConnector Type
‐PLPedestal Mount available as an option on some Antennas
‐PMPole Mount available as an option on most Antennas(shown with L1A)
L1A‐TRMO‐NFActive Antenna shown with Outdoor Tripod Mount option
Mount Options:‐PM, ‐PL, ‐TRMO
Connector Types:N, SMA, TNC, male or female
Our antennas are specifically designed and manufactured for the GNSS frequencies (GPS, L5, GLONASS, Galileo, and Omnistar). In addition to standard L1 active (receive) and passive (broadcast) antenna’s, GPS Source also supplies L1/L2 antennas for most applications. We also manufacture our own RA1 and RA2 antennas for most military applications.
2
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
Antenna Product Line OPTIONS LIST
Waterproo
f
Herm
etically Sealed
Custom
Gain
Magnet M
ount
Pedestal M
ount
Pole M
ount
Tripod
Mou
nt
Our antennas are specifically designed and manufactured for the GNSS frequencies (GPS, L5, GLONASS, Galileo, and Omnistar). In addition to standard L1 active (receive) and passive (broadcast) antenna’s, GPS Source also supplies L1/L2 antennas for most applications. We also manufacture our own RA1 and RA2 antennas for most military applications.
GPS Source Antenna Product Line Notes Description List Price Dealer Price ‐AXX ‐MM ‐PL ‐PM ‐TRMO
1 L1A a GPS L1 Active $175.00 $122.50 STD — OPT — — OPT OPT
2 L1P GPS L1 Passive $50.00 $35.00 STD — — — OPT OPT —
3 L1L2-2GA b GPS L1/L2 Active $600.00 $420.00 STD STD OPT — — OPT OPT
4 L1L2-2GP GPS L1/L2 Passive $510.00 $357.00 STD STD — — OPT OPT —
5 L1L2-S2GA b,c GPS L1/L2 Active w/ Side Mount $600.00 $420.00 STD STD OPT OPT — — OPT
6 L1L2-S2GP c GPS L1/L2 Passive w/ Side Mount $510.00 $357.00 STD STD — OPT — — —GPS Source DAGR Antenna Product Line
7 L1L2-2GAD b,d GPS L1/L2 Active for DAGR 3.3V Requirement $600.00 $420.00 STD STD OPT — — OPT OPT
8 L1L2-S2GAD b,c,f GPS L1/L2 Active w/ Side Mount for DAGR 3.3V Requirement $600.00 $420.00 STD STD OPT OPT — OPT OPT
9 L1L2-S2GRA-1 c GPS L1/L2 Active (1) w/ Side Mount Round 2.7" $600.00 $420.00 STD STD OPT STD — — —
10 L1L2-RA-1 b,c,e Rectangular PER: IS-GPS-164 GPS L1/L2 Active $600.00 $420.00 STD STD — STD — — —
11 L1L2-RA-2 b,d,e Rectangular PER: IS-GPS-164 GPS L1/L2 Active $600.00 $420.00 STD STD — — — — —Special Application Antenna Product Line
12 L1L2G3GA b GPS L1/L2 GLONASS Active $690.00 $621.00 STD STD — — — OPT OPT
13 L1L2G3GP GPS L1/L2 GLONASS Passive $600.00 $540.00 STD STD — — — OPT —
14 L1L25GO3GA b GPS L1/L2/L5, Glonass, OmniStar & Galileo Active $1,100.00 $990.00 STD STD — — — OPT OPT
15 L1L25GO3GP GPS L1/L2/L5, Glonass, OmniStar & Galileo Passive $1,060.00 $954.00 STD STD — — — OPT —
List Price $0 $0 $50 $50 $150 $50 $200
Dealer Price $0 $0 $35 $35 $105 $35 $140
NOTESa. Max 36dBb. Max 33dB c. SMA connector onlyd. N, TNC and SMA available
f. Standard color is white; Snake Kit Standard color os Desert Sand
Standard connector types: N, TNC, SMA, male or female
e. Standard color is DS-Desert Sand (33303). Optional colors are available on -S Special Configuration: GN-Olive Drab Green (34094); BK-Black Lusterless (37038); WH-White Gloss (17925)
3
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
30dB In‐Line Amplifier Product Line 40dB In‐Line Amplifier Product Line
1. 30dB In‐Line GPS Amplifier, Standard Housing
Example Part Number: A11‐A20‐NF
2. 30dB In‐Line GPS Amplifier, Mini Housing
Example Part Number: A11M‐V‐TF
3. 30dB In‐Line GPS Amplifier, Tiny Housing
Example Part Number: A11T‐A20‐SF
5. 40dB In‐Line GPS Amplifier, Long Housing
Example Part Number: A11XL‐A35‐PDC/5‐NF
6. 40dB In‐Line GPS Amplifier, Mini Housing
Example Part Number: A114M‐V‐NF
7. 40dB In‐Line GPS Amplifier, Tiny Housing
Example Part Number: A114T‐A20‐SF
The standard configuration for non‐powered amplifiers is to pass DC on the input and the output.The standard configuration for the NEW MA11M is block DC on input and pass DC on output.
The standard configuration for powered amplifiers is to pass DC on the input and block DC on the output. Special configurations are available and must be specified.
Example Part Number: A11 ‐ AXX ‐ P110 / 5 ‐ SF
Product NameGain OptionSource VoltageOutput VoltageConnector Type
Gain Option:AXX – XX = Desired Gain LevelV = Variable 0 ‐30 dBBlank = default gain
Source Voltage:P110, P230, P240, PDC, (PM, PMS)
Output Voltage:3.3, 5, 7.5, 9, 12, XX, V
Connector Types:N, SMA, TNC, male or female
40dB Low‐Noise Amplifier Product Line
12. Low Noise Amplifier for GPS L1 & L2 Signals, Long Housing
Example Part Number: L1L2LNA‐A1‐NF
11. Low Noise Amplifier for GPS L1 Signal, Standard Housing
Example Part Number: L1LNA‐A1‐NF
When you need to increase the power of your GNSS signal, GPS Source has standard 30dB and 40dB amplifiers and LNA’s in a wide range of housing formats to fit your specific application. We also can build amplifiers with a specific amplification or variable amplification in addition to LCD displayed gain control amplifiers.
4. Military Qualified 30dB In‐Line GPS Amplifier,
Mini HousingExample Part Number: MA11M‐‐NF
4
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
8. Variable Gain Amplifier with LCD readout.
(Shown with Passive antenna, on a pedestal mount, with power)Example Part Number: A11XLV‐P110/5‐NF
Glonass Enabled Amplifier
9.&10. Smart Amplifier for GPS L1, with Push Buttons and Display.
Comes with Serial Interface, Antenna Monitor Alarm and Oscillation Detect Options.
Example Part Number: METRO‐F12‐P110/6.8‐NF
or METROe‐F12‐P230/6.8‐NF
The standard configuration for non‐powered amplifiers is to pass DC on the input and the output. The standard configuration for powered amplifiers is to pass DC on the input and block DC on the output.
Special configurations are available and must be specified.
Smart Amplifier
Source Voltage:P110, P230, P240, PDC
Output Voltage:3.3, 5, (6.8), 7.5, 9, 12, XX, V
Connector Types:N, SMA, TNC, male or female
Example Part Number: A11XLV‐P110 / 5 ‐ NF
Product NameSource VoltageOutput VoltageConnector Type
GPS Source is the only manufacturer of next generation “smart” amplifiers that provide a consistent/controlled power output that can be selected on a digital display. Our smart amplifiers will also monitor for oscillation and mitigate it
making them the safest GPS amplifiers available.
5
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
Amplifier Product Line
AMPLIFIERS: When you need to increase the power of your GNSS signal, GPS Source has standard 30dB and 40dB amplifiers and LNA’s in a wide range of housing formats to fit your specific application. We also can build amplifiers with a specific amplification or variable
amplification in addition to LCD displayed gain control amplifiers.
SMART AMPLIFIERS: GPS Source is the only manufacturer of next generation “smart” amplifiers that provide a consistant/controlled power output that can be selected on a digital display. Our smart amplifiers will also monitor for oscillation and mitigate it making them
the safest GPS amplifiers available.
30 dB In-Line Amplifier Product Line Notes Description List Price Dealer Price1 A11 In-line Amplifier 30dB Standard Housing $325.00 $227.502 A11M a In-line Amplifier 30dB Mini Housing $310.00 $217.003 A11T b In-line Amplifier 30dB Tiny Housing $290.00 $203.004 MA11M a, s Military Qualified In-line Amplifier 30dB Mini Housing $1,080.00 $756.00
40 dB In-Line Amplifier Product Line5 A11XL In-line Amplifier 40dB Long Housing $400.00 $280.006 A114M a In-line Amplifier 40dBMini Housing $340.00 $238.007 A114T b In-line Amplifier 40dBTiny Housing $320.00 $224.00
Glonass Enabled Amplifier8 A11XLV Variable Gain Amplifier with LCD readout $982.00 $687.40
Smart Amplifier9 METRO m, n Smart Amplifier with Push Buttons & Display $1,200.00 $840.0010 METROe m, n Smart Amplifier with Push Buttons & Display, CE Certified $1,200.00 $840.00
40 dB Low Noise Amplifier Product Line11 L1LNA L1 Filtered Low-Noise Amp Standard Housing $450.00 $315.0012 L1L2LNA L1/L2 Filtered Low-Noise Amp Long Housing $750.00 $525.00
NOTESa. All standard connector types availableb. Limited to SMA connectorm. Choose between On/Off Function or Always On optionn. METRO DC Power out is always XXX/6.8s. Standard Configuration is DC Block on Input, DC Pass on Output
Options listed on next page
Standard connector types: N, TNC, SMA, male or female
6
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
Amplifier Product Line - Options List
Antenn
a Mon
itorin
g
Custom
Gain
Beacon
Controlled Signal Sou
rce
EMI Shielding
Filte
red L1
Filte
red L1/L2
Herm
etica
lly Sealed
Oscillation De
tect
Power AC or DC
‐PXX
X/XX
Power AC and DC
‐PDC
XXX/XX
Power M
il Co
nnector
‐PM/XX
Power 1275B
Mil Co
nn‐PMS‐1275/XX
Power 704
Mil Co
nn‐PMS‐704/XX
Power ISO‐7637
‐PMI/XX
Seria
l
Bluetooth
On/Off Sw
itched Po
wer
Varia
ble Ga
in
Waterproo
f
Varia
ble An
tenna DC
30 dB In-Line Amplifier Product Line ‐AM ‐AXX ‐B ‐CS ‐E ‐F1 ‐F12 ‐HS ‐O ‐R2 ‐R2B ‐SP ‐V ‐W ‐XXX/V1 A11 — OPT OPT — OPT (c) — — OPT (c) — OPT OPT OPT OPT OPT OPT — — OPT(d,h) OPT (g,h) OPT OPT (g,h,q)2 A11M — OPT OPT — OPT (c) — — OPT (c) — — — — — — — — — — OPT (g,h) OPT —
3 A11T — OPT — — OPT (c) — — OPT (c) — — — — — — — — — — — OPT —
4 MA11M — — — — STD — — STD — — — — — — — — — — — STD —
40 dB In-Line Amplifier Product Line5 A11XL — OPT — — OPT (c) OPT OPT OPT (c) — OPT OPT — — — — — — OPT(d,h) — OPT OPT (g,h,q)6 A114M — OPT OPT — OPT (c) OPT (e) — OPT (c) — — — — — — — — — — OPT (f,h) OPT —
7 A114T — OPT — — OPT (c) OPT (e) — OPT (c) — — — — — — — — — — — OPT —
Glonass Enabled Amplifier8 A11XLV OPT (r) — — — — — — — STD OPT — — — — OPT OPT (k,r) — — — —
Smart Amplifier9 METRO STD — — OPT (o) — STD OPT — STD STD (n,p) OPT (n,p) — — — — STD OPT — — — —
10 METROe STD — — OPT (o) — STD OPT — STD STD (n,p) OPT (n,p) — — — — STD OPT — — — —
40 dB Low Noise Amplifier Product Line11 L1LNA — OPT — — OPT STD — — — OPT OPT OPT — — — — — — — OPT —
12 L1L2LNA — OPT — — OPT — STD — — OPT OPT OPT OPT OPT OPT — — — — OPT —
List Price $57 $28 $57 $125 $175 $57 $200 $250 $28 $57 $86 $114 $228 $228 $228 $114 $514 $150 $57 $28 $100
Dealer Price $40 $20 $40 $88 $123 $40 $140 $175 $20 $40 $60 $80 $160 $160 $160 $80 $360 $105 $40 $20 $70
NOTESc. Includes Waterproof option; applies to device only, not power d. Requires Power option (must add price for power option)e. Gain is 38.5dBf. Gain is 0dB to 36dBg. Gain is 0dB to 30dBh. Waterproof Option Not Availablek. Requires Serial Optionn. METRO DC Power out is always XXX/6.8o. Attenuator 32dB; direct connectp. Requires 15-36 VDC for DC inputq. Standard Range is 5-12 VDCr. Antenna DC is 5V minimum
7
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
GPS Repeater Assembly*
1. GPS L1 Repeater Assembly with Amplifier, Passive Antenna and Pedestal Mount.
(To be used with Active Antenna and Cable.)Example Part Number: GPSRKL1‐P110/5‐NF
2. GPS L1 and L2 Repeater Assembly with Amplifier, Passive Antenna and Pedestal Mount.
(To be used with Active Antenna and Cable.)Example Part Number: GPSRKL12‐A10‐P110/5‐NF
3. GPS L1, L2 and Glonass Repeater Assembly with Amplifier, Passive Antenna and Pedestal Mount.
(To be used with Active Antenna and Cable.)Example Part Number: GPSRKL12G‐V‐P110/5‐NF
4. GPS L1, L2, L5, Glonass, Omnistar & Galileo Repeater Assembly with Amplifier,
Passive Antenna and Pedestal Mount. (To be used with Active Antenna and Cable.)
Example Part Number: GPSRKL125GO‐P110/5‐NF
*ONLY AVAILABLE TO APPROVED / LICENSED ENTITIES: 1. Federal Government or agencies operating under the direction of the Federal Government2. Parties that have received an STA or Experimental License under part 5 of the FCC rules3. Parties operating in an anechoic chamber4. International Customers (outside the U.S.)
Indoor Tripod Mount as an option on the Repeater Assembly
Example Part Number: GPSRKL1 ‐ AXX ‐ P110 / 5 ‐ SFProduct NameGain OptionSource VoltageOutput VoltageConnector Type
Gain Option:AXX – XX = Desired Gain LevelV = Variable 0 ‐30 dBBlank = default gain
Source Voltage:P110, P230, P240, PDC, PM
Output Voltage:3.3, 5, (6.8),7.5, 9, 12, XX, V
Connector Types:N, SMA, TNC, male or female
7.&8. Smart GPS L1 or L1/L2 Repeater Assembly.
Includes METRO on a mount with Passive L1 or L1L2 Antenna.Also Available CE Certified
Example Part Number: METRO‐A1Example Part Number: METROe‐A1Example Part Number: METRO‐A12Example Part Number: METROe‐A12
L1 Passive Antenna
L1L2 Passive Antenna
Smart Repeater Assembly *When you need to bring the GNSS signal indoors wirelessly, GPS Source designs and manufactures robust repeater assemblies that include
the repeater and mounting bracket. Repeaters can be purchased to pass L1,/L2, L5, GLONASS, Galileo, and Omnistar.
8
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
9.&10. Complete Smart Amplifier GPS L1 Repeater Kit. Includes Active and Passive Antennas, Cables, Amplifier, Mounts and
Lightening/Surge Protection.Example Part Number: METRO‐RK‐P110/6.8‐C240‐100Example Part Number: METROe‐RK‐P230/6.8‐C240‐100
Complete Smart Repeater Kit *
11. Complete First Responder GPS L1 Repeater Kit with Active and Passive Antennas,
Variable Amplification, Power AC and DC Option, Cable and Mounts.
Example Part Number: FRK1
*ONLY AVAILABLE TO APPROVED / LICENSED ENTITIES: 1. Federal Government or agencies operating under the direction of the Federal Government2. Parties that have received an STA or Experimental License under part 5 of the FCC rules3. Parties operating in an anechoic chamber4. International Customers (outside the U.S.)
Example Part Number: METRO‐RK ‐ P110/6.8 – NF – C240‐100
Product NameSource VoltageOutput VoltageConnector TypeCable TypeCable Length
Source Voltage:P110, P230, P240, PDC
Output Voltage:6.8 Only
Connector Types:N, SMA, TNC, male or female
Cable Type/Length:C240‐XX, C400‐XX
Yes, you can order an entire GPS repeater system with one part number that works for many applications. Our repeater systems also use our latest smart repeater technology. These systems include the repeater assembly and all other components you need to have complete and operational system.
9
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
Repeater Assembly Product Line
REPEATER ASSEMBLIES: When you need to bring the GNSS signal indoors wirelessly, GPS Source designs and manufactures robust repeater assemblies that include the repeater and mounting bracket. Repeaters can be purchased to pass L1/L2, L5, GLONASS, Galileo, and Omnistar.
COMPLETE REPEATER SYSTEMS USING "SMART" REPEATER TECHNOLOGY: You can order an entire GPS repeater system with one part number that works for many applications. Our repeater systems use our latest smart repeater technology. These systems include the repeater assembly and all other components you need to have a
complete and operational system.
GPS Repeater Assembly (e) Notes Description List Price Dealer Price1 GPSRKL1 GPS Amplifier on mount with L1 Passive Antenna $475.00 $332.502 GPSRKL12 GPS Amplifier on mount with L1/L2 Passive Antenna $985.00 $689.503 GPSRKL12G GPS Amplifier on mount with L1/L2, GLONASS Passive Antenna $1,075.00 $752.504 GPSRKL125GO GPS Amplifier on mount with L1/L2/L5, GLONASS, Omnistar, Galileo Passive Antenna $1,535.00 $1,074.50
GPS Filtered Repeater Assembly (e)5 GPSRKXL1 40dB GPS Amplifier Long Housing on mount with L1 Passive Antenna $575.00 $402.506 GPSRKXL12 40dB GPS Amplifier Long Housing on mount with L1/L2 Passive Antenna $1,110.00 $777.00
Smart Repeater Assembly (e)7 METRO-A1 k METRO Ampifier on mount with L1 Passive Antenna $1,400.00 $980.00 Options listed on Next Page8 METRO-A12 k METRO Ampifier on mount with L1/L2 Passive Antenna $1,860.00 $1,302.00
Smart Repeater Kit
9 METRO-RK* j,k,oComplete system including Active Antenna, Passive Antenna, Amplifier with Push Buttons and Display, Up to 100 ft of 240 Cable, COPRO Surge Protector Kit, and Mounts $1,820.00 $1,274.00
10 METROe-RK* h,k,o
Complete system including Active Antenna, Passive Antenna, Amplifier with Push Buttons and Display, Fixed 30.5 meters of 240 Cable, COPRO Surge Protector Kit, and Mounts (CE Certified) $1,820.00 $1,274.00
Complete GPS L1 Kit
11 FRK1Complete L1 system including Active Antenna, Passive Antenna, Variable Amplifier with mount and 100 ft of 240 cable, Power AC & DC $1,200.00 $840.00
NOTES *Standard on METRO-RKe. Complete System requires purchase of Active GPS Antenna and a Cable Assembly Oscillation Detect (-O)h. Level Locked to -85dBm to comply with CE Certification Antenna Monitoring Alarm (-AM)j. Choose cable length up to 100 ft Serial (-R2)k. Choose between On/Off funtion or Always On Option Mount (-M)o. METRO Power is always XXX/6.8
Other connector types may be available as special order, upon request
Standard connector types:N, TNC, SMA, male or female
10
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
Repeater Assembly Product Line - Options List
Custom
Gain
Controlled Signal Sou
rce
L1Filte
ring
L1L2 Filtering
No Amplifier
Bluetooth
On/Off Sw
itched Po
wer
No Pow
er
‐NP
Power AC or DC
‐PXX
X/XX
Power AC & DC
‐PDC
XXX/XX
Power M
il Co
nnector
‐PM/XX
Power Solar
‐PSXXX
/XX
Tripod
Mou
nt
Varia
ble Ga
in
Waterproof
Varia
ble An
tenna DC
GPS Repeater Assembly (e) ‐AXX ‐CS ‐F1 ‐F12 ‐NA ‐R2B ‐SPXXX ‐TRMI ‐V ‐W ‐XXX/V1 GPSRKL1 OPT — — — OPT — OPT(d,f) OPT STD OPT OPT OPT (c) OPT OPT(b,f) OPT(a) OPT(d,f,g)2 GPSRKL12 OPT — — — OPT — OPT(d,f) OPT STD OPT OPT OPT (c) OPT OPT(b,f) OPT(a) OPT(d,f,g)3 GPSRKL12G OPT — — — OPT — OPT(d,f) OPT STD OPT OPT OPT (c) OPT OPT(b,f) OPT(a) OPT(d,f,g)4 GPSRKL125GO OPT — — — OPT — OPT(d,f) OPT STD OPT OPT OPT (c) OPT OPT(b,f) OPT(a) OPT(d,f,g)
GPS Filtered Repeater Assembly (e)5 GPSRKXL1 OPT — STD — — — OPT(d,f) OPT STD OPT — OPT (c) OPT — OPT(a) OPT(d,f,g)6 GPSRKXL12 OPT — — STD — — OPT(d,f) OPT STD OPT — OPT (c) OPT — OPT(a) OPT(d,f,g)
Smart Repeater Assembly (e)7 METRO-A1 — OPT (p) STD — — OPT — — STD (o,m)OPT (o,m) — — OPT — — —
8 METRO-A12 — OPT (p) — STD — OPT — — STD (o,m)OPT (o,m) — — OPT — — —
Smart Repeater Kit
9 METRO-RK* — OPT (p) STD OPT(n) — OPT — — STD (o,m)OPT (o,m) — — OPT — — —
10 METROe-RK* — OPT (p) STD OPT(n) — OPT — — STD (o,m)OPT (o,m) — — OPT — — —
Complete GPS L1 Kit
11 FRK1 — — — — — — — — — STD — — — — — —
List Price $28 $125 STD $1,126 $25 $514 $150 $25 STD $29 $57 TBD $200 $57 $57 $100
Dealer Price $20 $88 STD $788 $18 $360 $105 $18 STD $20 $40 TBD $140 $40 $40 $70
NOTES *Standard on METRO-RKa. Power DC or No Powered only Oscillation Detect (-O)b. Gain is 0dB to 30dB Antenna Monitoring Alarm (-AM)c. Contact GPS Source sales department for details Serial (-R2)d. Requires Power Option (Must add price to power option) Mount (-M)e. Complete System requires purchase of Active GPS Antenna and a Cable Assemblyf. Waterproof Option Not Availableg. Standard Range is 5-12 VDCm. Requires 15-36 VDC for DC inputn. Filtered L1/L2 includes updated L1/L2 Active and Passive Antennaso. METRO Power is always XXX/6.8p. Attenuator 32dB; direct connect
11
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
1.&5. GLI HANGAR 1 ‐ GPS Amplifier/Repeater, L1 Filtered with ERP Control, Oscillation Detect, Antenna Alarm Monitoring, RS232, Power XXX/6.8, Pedestal Mount, Active
Antenna w/ pole mount, Passive Antenna, COPRO Kit, 100ft of C240, NF, Power Always OnAlso Available CE Certified
Part Numbers: GLI‐H1 and GLI‐H1e
GLI Hangar Kits
2. GLI HANGAR 2 ‐ GPS Amplifier/Repeater, L1 Filtered with ERP Control, Oscillation Detect, Antenna Alarm Monitoring, RS232, Power XXX/6.8, Pedestal Mount, Active Antenna w/ pole
mount, Passive Antenna, COPRO Kit, (2) 100ft of C240, NF, Power Always OnGPS In‐line Amplifier 10dB, Mini Housing, NF
Part Numbers: GLI‐H2
3.&6. GLI HANGAR M1 ‐ GPS Amplifier/Repeater, L1/L2 Filtered with ERP Control, Oscillation Detect, Antenna Alarm Monitoring, RS232, Power XXX/6.8, Pedestal Mount, Active Antenna
w/ pole mount, Passive Antenna, COPRO Kit, 100ft of C240, NF, Power Always OnAlso Available CE Certified
Part Number GLI‐HM1 or GLI‐HM1e
4. GLI HANGAR M2 ‐ GPS Amplifier/Repeater, L1/L2 Filtered with ERP Control, Oscillation Detect, Antenna Alarm Monitoring, RS232, Power XXX/6.8, Pedestal Mount, Active Antenna
w/ pole mount, Passive Antenna, COPRO Kit, (2) 100ft of C240, NF, Power Always OnGPS In‐line Amplifier 10dB, Mini Housing, NF
Part Number GLI‐HM2
These kits are complete stand alone units. The Source Voltage is the only variable.
GPS Source has a full repeater product line to meet bring GPS inside your aircraft hangar. All these systems come complete with everything you need to safely bring GPS live inside your hangar and all systems use our smart repeater technology. Call us and we can help you pick the right size and configuration for your hangar application.
12
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
Hangar Kits NoteDescription List Price Dealer Price
1 GLI-H1
GLI HANGAR 1 - GPS Amplifier/Repeater, L1 Filtered with ERP Control, Oscillation Detect, Antenna Alarm Monitoring, RS232, Power XXX/6.8, Pedestal Mount, Active Antenna with pole mount, Passive Antenna, COPRO Kit, 100ft of C240, NF, Power Always On $1,820 $1,274
2 GLI-H2
GLI HANGAR 2 - GPS Amplifier/Repeater, L1 Filtered with ERP Control, Oscillation Detect, Antenna Alarm Monitoring, RS232, Power XXX/6.8, Pedestal Mount, Active Antenna with pole mount, Passive Antenna, COPRO Kit, (2) 100ft of C240, NF, Power Always OnGPS In-line Amplifier 10dB, Mini Housing, NF $2,325 $1,628
3 GLI-HM1
GLI HANGAR M1 - GPS Amplifier/Repeater, L1/L2 Filtered with ERP Control, Oscillation Detect, Antenna Alarm Monitoring, RS232, Power XXX/6.8, Pedestal Mount, Active Antenna with pole mount, Passive Antenna, COPRO Kit, 100ft of C240, NF, Power Always On $2,900 $2,030
4 GLI-HM2
GLI HANGAR M2 - GPS Amplifier/Repeater, L1/L2 Filtered with ERP Control, Oscillation Detect, Antenna Alarm Monitoring, RS232, Power XXX/6.8, Pedestal Mount, Active Antenna with pole mount, Passive Antenna, COPRO Kit, (2) 100ft of C240, NF, Power Always OnGPS In-line Amplifier 10dB, Mini Housing, NF $3,410 $2,387
5 GLI-H1e a
GLI HANGAR 1e - CE Certified GPS Repeater, L1 Filtered with ERP Control, Oscillation Detect, Antenna Alarm Monitoring, RS232, Power XXX/6.8, Pedestal Mount, Active Antenna with pole mount, Passive Antenna, COPRO Kit, 100ft of C240, NF, Power Always On $1,820 $1,274
6 GLI-HM1e a
GLI HANGAR M1e - CE Certified GPS Repeater, L1/L2 Filtered with ERP Control, Oscillation Detect, Antenna Alarm Monitoring, RS232, Power XXX/6.8, Pedestal Mount, Active Antenna with pole mount, Passive Antenna, COPRO Kit, 100ft of C240, NF, Power Always On $2,900 $2,030
NOTESa. Level Locked to -85dBm to comply with CE Certification
GLI Hangar KitsGPS Source has a full repeater product line to meet your requirements and bring GPS inside your aircraft hangar. All these systems come complete with everything you need to safely bring GPS live inside your hangar and all systems use our smart
repeater technology. Call us and we can help you pick the right size and configuration for your hangar application.
13
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
1.&2. GPS Repeater Hood with Attenuation, 5“ or 8.75” Diameter.
To be used with Active Antenna and Cable.Example part number: GPSRHL15‐V‐SF
Repeater Hood Product Line*
*NO FCC LICENSING REQUIRED. Device is designed to contain GPS Signal within the hood enclosure.
Example Part Number: GPSRHL15 – V – SF
Product NameVariable AttenuationConnector Type
Variable Attenuation:V: 0‐30dB Variable Attenuation
Connector Types:SMA‐Female Only w/o –V optionN, SMA, TNC, male or female
When you need a test chamber (anechoic) that fully contains the GNSS signal, our repeater hoods are the answer.
14
OPTIONS LISTRepeater Hood Product Line
L1/L2
L1/L2/Glon
ass
Varia
ble Attenu
ation
When you need a test chamber (anechoic) that fully contains the GNSS signal, our repeater hoods are the answer.
Repeater Hoods Notes Description List Price Dealer Price ‐L2 ‐L2G ‐V1 GPSRHL15 b 5 inch Diameter Repeater Hood $1,493.00 $1,045.10 OPT OPT OPT (a)2 GPSRHL18 b 8.75 inch Diameter Repeater Hood $2,393.00 $1,675.10 OPT OPT OPT (a)
TBD TBD TBD TBD TBD
List Price $655 $800 $228Dealer Price $459 $560 $160
NOTES Standard connector is SMA femalea. Input connector types SMA, N, TNC, BNC femaleb. Power option on Hoods "obsolete". Must purchase bias-T and cable separately to power
Custom Hoods Also Available
15
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
Splitter Product Line
1. GPS Splitter, 1 Input, 2 Outputs, Standard HousingExample Part Number: S12‐A12‐NF
4. GPS Splitter, 1 Input, 4 Outputs, Standard HousingExample Part Number: S14‐A08‐NF
6. GPS Splitter, 1 Input, 8 Outputs, Standard Housing
Example Part Number: S18‐NF
2. GPS Splitter, 1 Input, 2 Outputs, Slimline HousingExample Part Number: S12S‐A‐SF
5. GPS Splitter, 1 Input, 4 Outputs, Slimline HousingExample Part Number: S14S‐A00‐SF
7. GPS Splitter, 1 Input, 8 Outputs, Slimline HousingExample Part Number: S18S‐A10‐SF
The standard configuration for all splitters is passive, except for the S18 which is 18dB.The standard configuration for non‐powered splitters is to pass DC on the input and port 1; block DC on remaining ports.
The standard configuration for a powered splitter is to pass DC on the input and block DC on all output ports. Special configurations are available and must be specified.
Example Part Number: S12 ‐ AXX ‐ P110 / 5 ‐ SF
Product NameGain OptionSource VoltageOutput VoltageConnector Type
Gain Option:AXX – XX = Desired Gain Level‐A = default gain
Source Voltage:P110, P230, P240, PDC, (PM, PMS)
Output Voltage:3.3, 5, 7.5, 9, 12, XX, V
Connector Types:N, SMA, TNC, male or female
When you need the GNSS signal routed to multiple destinations, GPS Source has the most extensive line of GPS splitter in a wide array of output and housing form factors. We provide everything from passive splitters to units that can amplify each output port to your specific needs.
3. GPS Splitter, 1 Input, 2 Outputs, Tiny Housing
Example Part Number: S12T‐A6‐SF
16
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
8. GPS Smart Ruggedized Splitter, 1 Input, 4 Outputs, Amplified 10dB,
Waterproof, DC Bias Select, Surge Protection
Example Part Number: S14WI‐E‐HS‐NF
Ruggedized and MIL‐SPEC Splitter Product Line
9. GPS Smart Ruggedized Splitter, 1 Input, 8 Outputs, Amplified 10dB,
Waterproof, DC Bias Select, Surge Protection
Example Part Number: S18WI‐AM‐NF
10. GPS Splitter Designed to Military Specifications, 1 Input, 2 Outputs, Standard Housing, EMI Shielding, Hermetically Sealed, Waterproof
Example Part Number: MS12‐A10‐NF
11. GPS Splitter Designed to Military Specifications, 1 Input, 4 Outputs, Standard Housing, EMI Shielding, Hermetically Sealed, Waterproof
Example Part Number: MS14‐A4‐PMS704/5‐NF
The standard configuration for all splitters is passive, except for the MS18 which is 15dBThe standard configuration for non‐powered splitters is to pass DC on the Input(s) and Output port 1; block DC on remaining ports.
The standard configuration for a powered splitter is to pass DC on the Input(s) and block DC on all Output ports. Special configurations are available and must be specified.
Example Part Number: S14WI ‐ AXX ‐ NF
Product NameGain OptionConnector Type
Gain Option:AXX – XX = Desired Gain Level‐A = default gain
Source Voltage (on MS12 , MS14, MS18):PMS704, PMS1275B
Output Voltage:5, 7.5
Connector Types:N, SMA, TNC, male or female
We are your source for fully qualified Mil‐Spec splitters. GPS Source can also provide mil‐qualifying services for any of our products. Additionally, GPS Source offers a series of “smart” splitters that are capable of detecting failed power sources and switch to alternative power sources.
12. GPS Splitter Designed to Military Specifications,
1 Input, 8 Outputs, Standard Housing,
EMI Shielding, Hermetically Sealed,
WaterproofExample Part Number:
MS18‐A8‐PMS1275B/5‐NF
GPS Switch Splitters Designed to Military Specifications,
EMI Shielding, Hermetically Sealed,
Waterproof13. MS22 – Standard Housing
14. MS22S – Slim Housing15. MS24 – Standard Housing
16. MS24S – Slim Housing
17
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
Splitter Product Line
SPLITTERS: When you need the GNSS signal routed to multiple destinations, GPS Source has the most extensive line of GPS splitters ina wide array of output and housing form factors. We provide everything from passive splitters to units that can amplify each output port to
your specific needs.
RUGGEDIZED SPLITTERS: We are your source for fully qualified Mil-Spec splitters. GPS Source can also provide mil-qualifying services for any of our products. Additionally, GPS Source offers a series of “smart” splitters that are capable of detecting failed power
sources and switch to alternative power sources.
Splitters Notes Description List Price Dealer Price1 S12 1x2 Splitter Standard Housing $275.00 $192.502 S12S a 1x2 Splitter Slim Housing $250.00 $175.003 S12T a 1x2 Splitter Tiny Housing $250.00 $175.004 S14 1x4 Splitter Standard Housing $375.00 $262.505 S14S a 1x4 Splitter Slim Housing $350.00 $245.006 S18 d 1x8 Splitter Standard Housing $850.00 $595.007 S18S a, d 1x8 Splitter Slim Housing $750.00 $525.00
Ruggedized Splitter Product line8 S14WI j, k, o, q 1x4 Wireless Splitter Special Housing $595.00 $416.509 S18WI j, k, o, q 1x8 Wireless Splitter Special Housing $950.00 $665.00 Options listed on Next Page
MIL-SPEC Splitter Product line10 MS12 m, n 1x2 Military Splitter Standard Housing $1,159.00 $811.3011 MS14 m, n 1x4 Military Splitter Standard Housing $1,459.00 $1,021.3012 MS18 n, r 1x8 Military Splitter Standard Housing $2,058.00 $1,440.6013 MS22 m, n 2x2 Military Switch Splitter Standard Housing $1,456.00 $1,019.2014 MS22S a, m, n 2x2 Military Switch Splitter Slim Housing $1,406.00 $984.2015 MS24 m, n 2x4 Military Switch Splitter Standard Housing $1,756.00 $1,229.2015 MS24S a, m, n 2x4 Military Switch Splitter Slim Housing $1,706.00 $1,194.20
NOTESa. Limited to SMA connectord. Standard Amplification: 18dB included at no extra cost j. Limited to N, TNC, SMA connector typesk. Standard Amplification: 10dB included at no extra costm. Standard Amplification (-A): MS12=15dB / MS14=10dB / MS22=10dB / MS24 = 7dBn. Custom Gain Range: MS12=0-15 / MS14=0-10dB / MS18=0-20dB / MS22 = -15-10dB / MS24 = -20-7dBo. DC Bias Select is Standardq. Custom Gain Range: S14WI=0-20dB / S18WI=0-15dBr. Standard Amplification: 15dB included at no extra cost
Other connector types may be available as special order, upon request
Standard connector types: N, TNC, SMA, male or female
18
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
Splitter Product Line - Options List
Ampl
ified
(S
12, M
S12,
S14
, MS1
4S1
8, M
S18,
S14
WI)
Ampl
ified
(S
18W
I)
Ante
nna
Mon
itorin
gBe
acon
EMI S
hiel
ding
Filte
red
L1
Her
met
ical
ly S
eale
d
Pow
er A
C o
r DC
-PXX
X/XX
Pow
er A
C &
DC
-PD
CXX
X/XX
Pow
er M
il C
onne
ctor
-PM
/XX
Pow
er 1
275B
-PM
S-12
75/X
XPo
wer
704
-PM
S-70
4/XX
Pow
er IS
O-7
637
-PM
I/XX
Pow
er M
il PM
3899
9-P
M38
999/
XXPo
wer
Mil
Std
1275
B-P
MS3
8999
-127
5B/X
XPo
wer
Mil
Std
704
-PM
S389
99-7
04/X
XSw
itche
d Po
wer
Wat
erpr
oof
Varia
ble
Ante
nna
DC
Splitters -AM -B -E -F1 -HS -SPXXX -W -XXX/V1 S12 OPT(b,c,e) — — OPT OPT(f) — OPT(f) OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT(g,h) OPT OPT(g,h,p)
2 S12S OPT(b,c,e) — — — OPT(f) — OPT(f) — — — — — — — — — — OPT —
3 S12T OPT(b,c,e) — — — OPT(f) — OPT(f) — — — — — — — — — — OPT —
4 S14 OPT(b,c,e) — — OPT OPT(f) — OPT(f) OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT(g,h) OPT OPT(g,h,p)
5 S14S OPT(b,c,e) — — — OPT(f) — OPT(f) — — — — — — — — — — OPT —
6 S18 OPT(b,d,e) — — OPT OPT(f) — OPT(f) OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT(g,h) OPT OPT(g,h,p)
7 S18S OPT(b,d,e) — — — OPT(f) — OPT(f) — — — — — — — — — — OPT —
Ruggedized Splitter Product line8 S14WI (b,k,q) — OPT — OPT OPT OPT — — — — — — — — — — STD —9 S18WI — (b,k,q) OPT — OPT OPT OPT — — — — — — — — — — STD —
MIL-SPEC Splitter Product line10 MS12 OPT(b,m,n) — — — STD — STD — — — OPT OPT — — OPT OPT — STD —
11 MS14 OPT(b,m,n) — — — STD — STD — — — OPT OPT — — OPT OPT — STD —
12 MS18 OPT(b,n,r) — — — STD — STD — — — OPT OPT — — OPT OPT — STD —
13 MS22 OPT(b,m,n) — — — STD — STD — — — OPT OPT — — OPT OPT — STD —
14 MS22S OPT(b,m,n) — — — STD — STD — — — — — — — — — — STD —
15 MS24 OPT(b,m,n) — — — STD — STD — — — OPT OPT — — OPT OPT — STD —
16 MS24S OPT(b,m,n) — — — STD — STD — — — — — — — — — — STD —
List Price $125 $175 $57 $57 $175 $114 $250 $57 $86 $114 $228 $228 $228 $172 $286 $286 $150 $100 $100Dealer Price $88 $123 $40 $40 $123 $80 $175 $40 $60 $80 $160 $160 $160 $120 $200 $200 $105 $70 $70
NOTESb. Use -AXX if all ports are same gain or -AS and provide gain on each port in description fieldc. Standard Amplification (-A): S12=24dB / S12T=8dB / S14=21dBd. Standard Amplification: 18dB included at no extra cost e. Custom Gain Range: S12=0-24dB / S12T=0-8dB / S14=0-21dB / S18=0-18dBf. Includes Waterproof option; Applies to device only, not powerg. Requires Power Option (must add price for power)h. Waterproof Option Not Available k. Standard Amplification: 10dB included at no extra costm. Standard Amplification (-A): MS12=15dB / MS14=10dB / MS22=10dB / MS24 = 7dBn. Custom Gain Range: MS12=0-15 / MS14=0-10dB / MS18=0-20dB / MS22 = -15-10dB / MS24 = -20-7dBp. Standard Range is 5-12 VDCq. Custom Gain Range: S14WI=0-20dB / S18WI=0-15dBr. Standard Amplification: 15dB included at no extra cost
-A,-AXX,-AS
19
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
Rack Mount Splitter Product Line
1. GPS Rack Mount Splitter, 1 Input, 8 Outputs, 19" x 1.75" Housing, 12dB Amplification
Example Part Number: RMS18‐A6‐P110/5‐NF
2. GPS Rack Mount Splitter, 1 Input, 16 Outputs, 19" x 1.75" Housing, 8dB Amplification
Example Part Number: RMS116‐V‐P110/5‐NF
3. GPS Rack Mount Splitter, 1 Input, 32 Outputs, 19" x 1.75" Housing, 4dB Amplification
Example Part Number: RMS132‐P110/5‐NF
The standard configuration for non‐powered splitters is to pass DC on the input and port 1; block DC on remaining ports. The standard configuration for a powered splitter is to pass DC on the input and block DC on all output ports.
Special configurations are available and must be specified.
Example Part Number: RMS18 ‐ AXX ‐ P110 / 5 ‐ NF
Product NameGain OptionSource VoltageOutput VoltageConnector Type
Gain Option:AXX – XX = Desired Gain LevelV = Variable 0 ‐30 dBBlank = default gain
Source Voltage:P110, P230, P240, PDC, PM, P48
Output Voltage:3.3, 5, 7.5, 9, 12, XX, V
Connector Types:N, SMA, TNC, male or female
GPS Source is your source for 8, 16, and 32 output rack mount splitters with short lead times. If you need features that are not in this catalog, please call for availability and pricing.
20
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
OPTIONS LISTRack Mount Splitter Product Line
Cus
tom
Gai
n
Beac
on
No
Pow
er
Pow
er A
C o
r DC
-PXX
X/XX
Pow
er A
C &
DC
-PD
CXX
X/XX
Pow
er M
il C
onne
ctor
-PM
/XX
Pow
er -4
8VD
C-P
48/X
XO
n/O
ff Sw
itche
d Po
wer
Varia
ble
Gai
n
Varia
ble
Ante
nna
DC
GPS Source is your source for 8, 16, and 32 output rack mount splitters with short lead times. If you need features that are not in this catalog,
please call for availability and pricing.
Rack Mount Splitters Notes Description List Price Dealer Price -AXX, -AS -B -NP -SPXXX -V -XXX/V1 RMS18 c 19" wide X 1.75" high $1,450.00 $1,015.00 OPT(c,d,e) OPT OPT STD OPT OPT OPT OPT(g,h) OPT(f) OPT(g,h,i)
2 RMS116 c 19" wide X 3.50" high $2,050.00 $1,435.00 OPT(c,d,e) OPT OPT STD OPT OPT OPT OPT(g,h) OPT(f) OPT(g,h,i)
3RMS132 c 19" wide X 5.25" high (a)
19" wide X 7.00" high (b) $4,050.00 $2,835.00 OPT(c,d,e) OPT OPT STD OPT OPT OPT OPT(g,h) OPT(f) OPT(g,h,i)
TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD
List Price $200 $175 $25 $0 $29 $57 $171 $150 $800 $100Dealer Price $140 $123 $18 $0 $20 $40 $120 $105 $560 $70
NOTESa. SMA, TNC connectorsb. N connectors Standard connector types: N, TNC, SMA, male or femalec. Standard Gain / RMS18=12dB / RMS116=8dB / RMS132=4dBd. Custom Gain is always less than Standard Gaine. For gain greater than Standard order the Variable Gain optionf. Variable Gain is 0dB to 30dBg. Not available with No Power optionh. Must add price for power option other than standardi. Standard Range is 5-12 VDC
Other connector types may be available as special order, upon request
Ruggedized Rack Mounts Available
21
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
GPS Attenuator Product Line1. Passive GPS Attenuator for a Fixed
Attenuation, Standard HousingExample Part Number: AT11‐10‐P110/5‐NF
2. Passive GPS Attenuator with Variable Attenuation of ‐2 to ‐40dB, Standard Housing
Example Part Number: AT11V‐P110/5‐SF
3. Passive GPS Attenuator for a Fixed Attenuation, Mini Housing
Example Part Number: AT11M‐15‐NF
4. Passive GPS Attenuator for a Fixed Attenuation, Tiny Housing
Example Part Number: AT11T‐12‐SF
5. GPS In‐Line Digital Attenuator with LCD Readout,
Variable Attenuation of 0 to 60dB Example Part Number: AT11DV‐R2‐P110/5‐NF
The standard configuration for non‐powered Attenuators/Combiners/Filters is to pass DC on the input(s) and the output(s). The standard configuration for powered Attenuators/Combiners/Filters is to pass DC on the input(s) and block DC on the output(s).
Special configurations are available and must be specified.
Source Voltage:P110, P230, P240, PDC, PM, PMS
Output Voltage:3.3, 5, 7.5, 9, 12, XX, V
Connector Types:N, SMA, TNC, male or female
Example Part Number: AT11V ‐ P110/5 ‐ SFProduct NameSource VoltageOutput VoltageConnector Type
Combiner Product Line6. GPS Signal Combiner, 2 Inputs, 1 Output,
Standard HousingExample Part Number: C21‐P110/5‐NF
7. GPS Signal Combiner, 2 Inputs, 1 Output, Slimline Housing
Example Part Number: C21S‐SF
Bandpass Filter Product Line8. Bandpass Filter for GPS L1 Signal,
Mini Housing Example Part Number: L1FM‐HR‐NF
9. Bandpass Filter for GPS L1 Signal, Tiny Housing
Example Part Number: L1FT‐HS‐SF
10. Bandpass Filter for GPS L1 and L2 Signal, Standard Housing Example Part Number: L12F‐SF
22
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
Attenuator / Combiner / Filter
Attenuators Notes Description List Price Dealer Price1 AT11-XX k In-line Attenuator Standard Housing $125.00 $87.502 AT11V m In-line Variable Attenuator Standard Housing $325.00 $227.503 AT11M-XX a,k In-line Attenuator Mini Housing $95.00 $66.504 AT11T-XX b,k In-line Attenuator Tiny Housing $85.00 $59.50
Power Control Attenuator5 AT11DV In-line Digital 60dB w/Push Buttons & Display $775.00 $542.50
Combiners Other connector types may be available as special order, upon request
6 C21 Combiner Standard Housing $275.00 $192.507 C21S a Combiner Slim Housing $250.00 $175.00 Options listed on Next Page
Passive Filter8 L1FM a L1 Bandpass Filter Mini Housing $125.00 $87.509 L1FT b L1/L2 Bandpass Filter Tiny Housing $115.00 $80.5010 L12F L1/L2 Bandpass Filter Standard Housing $225.00 $157.50
NOTESa. All Standard connector types availableb. Limited to SMA connectork. Standard Range is 0dB to 25dBm. Standard Range is -2dB to -40dB
Standard connector types: N, TNC, SMA, male or female
23
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
Attenuator / Combiner / Filter - Options List
Ante
nna
Mon
itor A
larm
Beac
on
EMI S
hiel
ding
Filte
red
F1
Filte
red
F12
Hig
h R
ejct
ions
Her
met
ical
ly S
eale
d
Osc
illatio
n D
etec
tSe
rial
Blue
toot
h
Pow
er A
C o
r DC
-P
XXX/
XXPo
wer
AC
& D
C
-PD
CXXX
/XX
Pow
er M
il C
onne
ctor
-P
M/X
XPo
wer
ISO
-763
7 -P
MI/X
XPo
wer
127
5B w
/Mil
Con
nect
or
-PM
S-12
75B/
XX
On/
Off
Switc
hed
Pow
erAt
tenu
ator
s/Fi
lters
Com
bine
rs
Varia
ble
Ante
nna
DC
Attenuators -AM -B -E -F1 -F12 -HR -HS -O -R2 -R2B -SPXXX -W -XXX/V1 AT11-XX — OPT OPT (c) — — — OPT (c) — — — OPT OPT OPT OPT OPT OPT (d,e) OPT — OPT (d,e,f)2 AT11V — OPT OPT (c) — — — OPT (c) — — — OPT OPT OPT OPT OPT OPT (d,e) OPT — OPT (d,e,f)3 AT11M-XX — — OPT (c) — — — OPT (c) — — — — — — — — — OPT — —4 AT11T-XX — — OPT (c) — — — OPT (c) — — — — — — — — — OPT — —
Power Control Attenuator5 AT11DV OPT (i) — — OPT OPT — — OPT (g) OPT OPT (h,i) STD OPT — — — — — — —
Combiners6 C21 — OPT OPT (c) — — — OPT (c) — — — OPT OPT OPT OPT OPT OPT (d,e) — OPT OPT (d,e,f)7 C21S — — OPT (c) — — — OPT (c) — — — — — — — — — — OPT —
Passive Filter8 L1FM — — OPT (c) — — OPT OPT (c, j) — — — — — — — — — OPT — —9 L1FT — — OPT (c) — — STD OPT (c) — — — — — — — — — OPT — —
10 L12F — — OPT (c) — — — — — — — OPT OPT OPT OPT OPT OPT (d,e) OPT — OPT (d,e,f)
List Price $57 $57 $175 $57 $86 $28 $250 $28 $114 $514 $57 $86 $114 $228 $228 $150 $28 $57 $100Dealer Price $40 $40 $123 $40 $60 $20 $175 $20 $80 $360 $40 $60 $80 $160 $160 $105 $20 $40 $70
NOTESc. Includes Waterproof option; applies to device only, not powerd. Requires Power option (must add price for power)e. Waterproof option not availablef. Standard Range is 5-12 VDCg. Requires Filtered optionh. Requires Serial optioni. Antenna DC is 5v minimumj. Requires High Rejection Option
24
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
DC Block / Bias T / Cables / Accessories
1. Block DC, Pass GPS Signal, Mini Housing
Example Part Number: DCB‐NF
2. Bias T, In‐line Voltage Supplier, Standard Housing
Example Part Number: BT1‐P110/5‐NF
3. Coaxial LMR240 Cable, Custom Length, Recommended up to 100‘
Example Part Number: C240‐100‐NM
4. Coaxial LMR400 Cable, Custom Length, Recommended over 100‘
Example Part Number: C400‐150‐NM
10. Coax Seal, Easy Seal for Any Outdoor Cable Connection
Example Part Number: COAX‐SEAL‐ROLL
5. Coaxial Surge/Lightening Protection with N connector
Example Part Number: CO‐PRO
6. Coaxial Surge Protection Kit with Co‐Pro, Coax Seal and
15' of LMR240 Cable (for use with all systems using an active antenna)
Example Part Number: CO‐PRO Kit
7. RF AdapterExample Part Number: A‐NM‐SF
8. RF LoadExample Part Number: L50‐NM
9. RF Connector for Device or CableExample Part Number: C‐NM Cable 240
25
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
DC Block / Bias T / Cables / Accessories OPTIONS List
Beac
on
EMI S
hiel
ding
Her
met
ical
ly S
eale
d
Pow
er A
C o
r DC
- P
XXX/
XX
Pow
er A
C &
DC
-P
DCX
XX/X
XPo
wer
Mil
Con
nect
or-P
M/X
X
Pow
er IS
O-7
637
-PM
I/XX
On/
Off
Switc
hed
Pow
erW
ater
proo
f
Varia
ble
Ante
nna
DC
DC Block Notes Description List Price Dealer Price -B -E -HS -SPXXX -W -XXX/V1 DC Block DC Block Mini Housing $65.00 $45.50 — OPT(a) OPT(a) — — — — — OPT(a) —
Bias T2 BT1 Bias T Standard Housing $125.00 $87.50 OPT OPT(a) OPT(a) STD OPT OPT OPT OPT(b) OPT(a) OPT
Cables c,d,e,f3 C240 d Recommended up to 100'; price per foot $1.75 $1.23 — — — — — — — — — —4 C400 e Recommended over 100'; price per foot $2.50 $1.75 — — — — — — — — — —5 COPRO g Lightning Surge Protector $143.00 $100.10 — — — — — — — — — —6 COPRO-Kit g Lightning Surge Protector Kit; Includes 15' Cable $172.00 $120.40 — — — — — — — — — —
Accessories7 Adapters Adapter $25.00 $17.50 — — — — — — — — — —8 Loads Load $20.00 $14.00 — — — — — — — — — —9 Connectors Connector $15.00 $10.50 — — — — — — — — — —# Coax Seal Roll Coax Seal Roll $5.50 $3.85 — — — — — — — — — —
List Price $57 $175 $250 STD $29 $57 $171 $150 $28 $100Dealer Price $40 $123 $175 STD $20 $40 $120 $105 $20 $70
NOTESa. Includes Waterproof option; applies to device only, not powerb. Waterproof option not availablec. Price is per footd. All C240 Cables Less than 20ft are $40.00 USD List, $28.00 Dealere. All C400 Cables Less than 20ft are $60.00 USD List, $42.00 Dealerf. Standard connector types: N, TNC, SMAg. N connector only; order adapter if need other
* Dual frequency antennas are not included
1‐Yr Additional Warranty2‐Yr Additional Warranty
10% of Cost of Goods15% of Cost of Goods
26
www.gpssource.com
Call 866-289-4777 (U.S.A.) or +1 719-561-9520 for Help Building Part Numbers
Prices Effective July 1, 2013 thru September 30, 2013
DC Block / Bias T / Cables / Accessories OPTIONS List
Beac
on
EMI S
hiel
ding
Her
met
ical
ly S
eale
d
Pow
er A
C o
r DC
- P
XXX/
XX
Pow
er A
C &
DC
-P
DCX
XX/X
XPo
wer
Mil
Con
nect
or-P
M/X
X
Pow
er IS
O-7
637
-PM
I/XX
On/
Off
Switc
hed
Pow
erW
ater
proo
f
Varia
ble
Ante
nna
DC
DC Block Notes Description List Price Dealer Price -B -E -HS -SPXXX -W -XXX/V1 DC Block DC Block Mini Housing $65.00 $45.50 — OPT(a) OPT(a) — — — — — OPT(a) —
Bias T2 BT1 Bias T Standard Housing $125.00 $87.50 OPT OPT(a) OPT(a) STD OPT OPT OPT OPT(b) OPT(a) OPT
Cables c,d,e,f3 C240 d Recommended up to 100'; price per foot $1.75 $1.23 — — — — — — — — — —4 C400 e Recommended over 100'; price per foot $2.50 $1.75 — — — — — — — — — —5 COPRO g Lightning Surge Protector $143.00 $100.10 — — — — — — — — — —6 COPRO-Kit g Lightning Surge Protector Kit; Includes 15' Cable $172.00 $120.40 — — — — — — — — — —
Accessories7 Adapters Adapter $25.00 $17.50 — — — — — — — — — —8 Loads Load $20.00 $14.00 — — — — — — — — — —9 Connectors Connector $15.00 $10.50 — — — — — — — — — —# Coax Seal Roll Coax Seal Roll $5.50 $3.85 — — — — — — — — — —
List Price $57 $175 $250 STD $29 $57 $171 $150 $28 $100Dealer Price $40 $123 $175 STD $20 $40 $120 $105 $20 $70
NOTESa. Includes Waterproof option; applies to device only, not powerb. Waterproof option not availablec. Price is per footd. All C240 Cables Less than 20ft are $40.00 USD List, $28.00 Dealere. All C400 Cables Less than 20ft are $60.00 USD List, $42.00 Dealerf. Standard connector types: N, TNC, SMAg. N connector only; order adapter if need other
* Dual frequency antennas are not included
1‐Yr Additional Warranty2‐Yr Additional Warranty
10% of Cost of Goods15% of Cost of Goods
27