grinding
TRANSCRIPT
![Page 1: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/1.jpg)
SHREE S’AD VIDYA MANDAL INSTITUTE OF TECHNOLOGY
Prepared By:- Prajapati Urvesh
Mirza Hamza
Patel mo.Kamil
Department:- Mechanical-C
Semester:- 3rd Sem
![Page 2: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/2.jpg)
PRESENTETION ONGRINDING
![Page 3: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/3.jpg)
Contents
1. Introduction
2. Principle of Grinding Machine
3. Types of grinding
4. Various elements of grinding wheel
5. Shapes and Coding of a Grinding Wheel
6. Wheel surface finishing
7. Classification of Grinding Machines
![Page 4: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/4.jpg)
1. Introduction Grinding is a metal cutting operation performed by means of abrasive particles rigidly mounted on a rotating wheel. Each of the abrasive particles act as a single point cutting tool and grinding wheel acts as a multipoint cutting tool. The grinding operation is used to finish the workpieces with extremely high quality of surface finish and accuracy of shape and dimension. Grinding is one of the widely accepted finishing operations because it removes material in very small size of chips 0.25 to 0.50 mm. It provides accuracy of the order of 0.000025 mm.
![Page 5: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/5.jpg)
2. Principle of Grinding Machines
Work piece is fed against the rotating abrasive wheel.Due to action of rubbing or friction between the
abrasive particles and work piece material is removed.
![Page 6: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/6.jpg)
3. Types of Grinding
On the basis of quality of grinding, it is classified as rough grinding and precision grinding. Rough Grinding Precision Grinding
Rough Grinding:-
It involves removal of stock without any reference to the accuracy of results.
Precision Grinding:-
Precision grinding removes negligible amount of metal. It is used to produce finished parts and accurate dimensions.
![Page 7: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/7.jpg)
4. Various elements of a Grinding Wheel
The various main elements of a grinding wheel are abrasive; bonds and structure which are described below.
Abrasive:- Generally abrasive properties like hardness, toughness and resistance to fracture uniformly abrasives are classified into two principal groups:- Natural abrasives Artificial abrasive
Natural abrasive:- There are a few examples of natural abrasives which include sand stone (solid quartz), emery, & diamond.
![Page 8: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/8.jpg)
Artificial abrasive:- Main artificial abrasive are silicon carbide and aluminium oxide. Artificial abrasive are preferred in manufacturing of grinding wheels because of their uniformity and purity.
NATURAL ABRASIVE ARTIFICIAL ABRASIVE
![Page 9: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/9.jpg)
Bond:- A bond is an adhesive material used to held abrasive particles together relatively stable that constitute a
grinding wheel.
Different types of bonds are:-
(a) Vitrified bond
(b) Silicate bond
(c) Shellac bond
(d) Resinoid bond
(e) Rubber bond
(f) Oxychloride bond
![Page 10: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/10.jpg)
(a) Vitrified bond:-
This bond consists of mixture of clay and water. Clay and abrasives are thoroughly mixed with water to make a uniform mixture. This bond is denoted by symbol ‘V’ in specification.
(b) Silicate bond:-
Silicate bonds are made by mixing abrasive particles with silicate and soda or water glass.These wheels are denoted by ‘S’ in specification.
![Page 11: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/11.jpg)
(c) Shellac bond:-
These are prepared by mixing abrasive with shellac than moulded by rolling and pressing and then by heating up to 150` C for several hours. This bond is denoted by ‘E’ in specifications.
(d) Resinoid bond:-
These bonds are prepared by mixing abrasives with synthetic resins like backelite and redmanol and other compounds & baked up to 200` C. A Resinoid bond is denoted by the letter ‘B’.
![Page 12: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/12.jpg)
(e) Rubber bond:-
Rubber bonded wheels are made by mixing abrasives with pure rubber and sulphur.A rubber wheel bonded wheel is denoted by the letter ‘R’.
(f) Oxychloride bond:-
These bonds are processed by mixing abrasives with oxides and chlorides of magnesium. An oxychloride bonded wheel is specified the letter ‘O’.
![Page 13: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/13.jpg)
STRUCTURE OF GRINDING WHEEL
![Page 14: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/14.jpg)
5. Shapes and Coding of a Grinding Wheel
Shapes:-
There are different shapes of grinding wheel
which mention below.
Straight Wheel:- These are generally used for cylindrical, internal, centreless and surface grinding operations. These wheels vary in size, diameter and width of the face.
Tapered Face Straight Wheels:- It is also a straight wheel but its free is slightly tapered to facilitate the grinding of threads an gear teeth.
![Page 15: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/15.jpg)
![Page 16: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/16.jpg)
Cylindrical Wheel Ring:- It is used for surface grinding, i.e. production of flat surfaces. Grinding takes place with the help of face of the wheel.
Cup Wheel:- It is used for grinding flat surfaces with the help of face of grinding wheel.
Flaring Cup Wheel:- It is used in grinding of tools in tool room.
Saucer Wheel:- It is used for sharpening of circular or band saw.
![Page 17: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/17.jpg)
Segmented Wheel:- These are normally on vertical spindle, rotary type and reciprocating type surface grinders.
Dish Wheel:- It is used for grinding of tools in tool room. It is capable to grind very narrow places due to its thinners.
![Page 18: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/18.jpg)
Coding:-
The Indian Standard Coding system of grinding wheel is IS : 551-1954. It gives a general indication of the hardness and abrasive size of any wheel as compared with another.
Coding of a grinding wheel consists of six symbols as described below.
W : Symbol for Manufacturer’s Abrasive Type (Prefix)
C : Name of Abrasive
30 : Grain Size
L : Grade
5 : Structure Type
R : Bond Type
17 : Manufacturer Symbol for Record (Suffix)
![Page 19: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/19.jpg)
The sequence of codes of a grinding should be followed in the same sequence as described above Their brief description is given below.
Prefix:- Manufacturer’s Symbol.
Abrasive:- Types of abrasive used in Grinding Wheel.
i.e. A= Aluminium Oxide
C= Silicon Carbide
Grain Size:- It affects the metal removal rate & finishing of surface.
Coarse Medium Fine Very fine
10 30 80 220
12 36 100 240
14 46 120 280
16 54 150 320
![Page 20: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/20.jpg)
Grade:- Ability of bonding material to sustain abrasive.
Structure:- Structure between bonding material & abrasive grain inside the grinding wheel.
Dense Open
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Very soft A,B,C,D,E,F,G
Soft H,I,J,K
Medium L,M,N,O
Hard P,Q,R,S
Very hard T,U,V,W,X,Y,Z
`
![Page 21: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/21.jpg)
Types of Bond:- It shows which type of bonding material is used.
V= Vitrified Bond
B= Resinoid Bond
R= Rubber Bond
E= Shellac Bond
S= Silicate Bond
Suffix:- Manufacturer’s own identification
![Page 22: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/22.jpg)
Example of Coding
51A 36L5V23
• 51 = Manufacture’s symbol• A = Abrasive ( Aluminum Oxide)• 36 = Grain size (Medium)• L = Grade (Medium)• 5 = Structure ( Dense)• V = Bond type (Vitrified Bond)• 23 = Manufacture’s identification.
![Page 23: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/23.jpg)
6. Wheel Surface Finishing
Glazing:-
This is the effect when the abrasive have become dull & ground to the ground. It is a condition in which cutting edge take glass-like appearance. This occurs due to high speed or the tool is very hard. To avoid glazing use softer wheel or decrease speed of wheel.
![Page 24: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/24.jpg)
Loading:-
When the material of the work piece is filled the gap between the abrasive grain then it is called as loading. This material prevent the wheel from cutting freely. It may caused be grinding a soft material or by using a heel of too hard and running it too slowly.
Truing:-
It is a process of changing the shape of grinding wheel. It can be done on the new wheel or on the used tool. This is done to make tool true and equal distance from the center.
![Page 25: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/25.jpg)
1. LOADING 2. GLAZING
![Page 26: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/26.jpg)
Dressing:-
This is done on loaded and glazed tool to gain there sharp abrasive particles.
This is done using different types of dresser,o Metal crushero Diamond dressero Abrasive sticks/wheels.
![Page 27: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/27.jpg)
7. Classification Of Grinding Machine
Grinding Machines are classified as,
a. Bench grinding machine
b. Surface grinding machine
c. Cylindrical grinding machine
d. Center less grinding machine
e. Internal grinding machine
f. Special purpose grinding machine
![Page 28: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/28.jpg)
a. Bench grinding machine These types of grinding machine is used to hand grind cutting tools and perform rough grinding. It may be used for sharpening cutting tool such as lathe tools or drill bits.
![Page 29: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/29.jpg)
b. Surface grinding machine
It is machine basically used to grind flat surface. Job is mounted to a table which moves longitudinally
as well as in transverse direction.Manual feed or power feed.Work piece can clamped in two ways–Manual clamps.–Magnetic chuck.
Internal pump and piping arrangement for coolant.Protective guard for safety.
![Page 30: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/30.jpg)
Surface Grinding Machine
![Page 31: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/31.jpg)
c. Cylindrical grinding machine
It is a process of grinding curved surfaces. Surface may be straight or tapered. Work piece is mounted on two centers, one is
tailstock centre and the other is headstock centre. Head stock center may or may not revolve.
![Page 32: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/32.jpg)
WORKING PRINCIPLE
![Page 33: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/33.jpg)
CYLINDRICAL GRINDING MACHINE
![Page 34: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/34.jpg)
d. Centre less grinding machine
It is used to grind curved surface work piece which are long and slender.
Work piece rests on a work-rest blade and is backed by a second wheel called as regulating wheel.
Grinding wheel pushes the work piece down the work-rest blade against the regulating wheel.
![Page 35: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/35.jpg)
WORKING PRINCIPLE
![Page 36: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/36.jpg)
CENTERLESS GRINDING MACHINE
![Page 37: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/37.jpg)
e. Internal grinding machine
In this type the grinding is done in the internal side of work piece.
In this operation the work piece may rotate or may not be rotate.
It can be done on different internal surface like straight, tapered, grooved, or profile.
![Page 38: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/38.jpg)
WORKING PRINCIPLE
![Page 39: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/39.jpg)
f. Some special grinding
It uses the principle of cylindrical grinding. Mainly it used for threaded profile. Specially formed wheel is use A single ribbed or multy ribbed wheel can be
used as shown in fig.
![Page 40: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/40.jpg)
SOME SPECIAL GRINDING
![Page 41: Grinding](https://reader033.vdocuments.net/reader033/viewer/2022042615/55c39fc8bb61eb01568b473a/html5/thumbnails/41.jpg)
THANK YOU