grip–twist xt mechanical splices · 2020-04-09 · grip–twist® xt flanged series all...
TRANSCRIPT
ALL DIMENSIONS ARE APPROXIMATE – PLASTIC FLANGE ALSO AVAILABLE FOR SIZES #4 AND #5 – ASK FOR DETAILS
5 11/16
4 1/16
3 5/8
3 1/8
3 1/8
2 3/4
2 1/8
1 13/16
1 1/21 5/161 9/161 7/82 7/162 3/42 3/4
3 1/43 5/85 3/16
15/161 1/81 5/161 3/4
22 1/8
2 3/82 11/163 1/4
1 5/82
2 3/82 5/8
3 1/83 1/4
2
2 3/4
3 13/165 3/4
2 7/162 15/162 15/163 3/8
3 11/163 3/4
4 1/84 1/4
6 7/8
2 1/42 11/163 1/163 15/164 7/16
4 13/16
5 3/85 5/8
0.671.26
1.72
3.44
4.875.9
9.5
10.827RED
PINKBLACK
BLUEYELLOW
RED
BLUE
YELLOW
RED
#14 [43]#11 [36]#10 [32]
#9 [29]#8 [25]#7 [22]#6 [19]#5 [16]#4 [13]
NON-SWAGEDLENGTH
N
ENDALLOWANCE
A
MALEINSERTION
H
FLANGEWIDTH
CF
FLANGEHEIGHT
B
BARINSERTION(AFTER SWAGE)
DIMENSIONS (in)FEMALE COUPLERw/ FLANGE WEIGHT
(lb)
GRIP–TWIST XTw/ METAL FLANGE COLOR CODE *
REBARSIZE
US [Metric]
F
H
A
N C
B
GRIP–TWIST® XT FLANGED SERIES
** EACH TAPER POSITION ASSEMBLY (XT##TPA) CONSISTS OF (1) POSITION COUPLER (XT##PF) AND (1) PRE-INSTALLED STUD (TT##RP) EACH MARKED WITH SEPARATE CODE FOR TRACEABILITY
0.621.18
1.64
3.34
4.74
5.8
9.310.6
2643
4067
2 1/42 11/163 1/16
3 15/164 7/16
4 13/16
5 3/85 5/86 7/88 1/2
1 1/81 1/41 5/8
1 1/21 5/81 7/8
1 3/42 1/82 1/82 3/4
3 3/44 3/85 3/8
6 3/87 1/87 3/8
8 1/49 3/812 1/214 3/8
15/161 1/81 5/16
1 3/4
22 1/8
2 3/82 11/163 1/44 3/8
1 5/161 9/161 7/8
2 7/162 3/42 3/4
3 1/43 5/85 3/165 13/16
1 1/21 13/162 1/8
2 3/43 1/83 1/8
3 5/84 1/165 11/166 13/16
F0.981.75
2.66
5.29
7.65
9.8
14.416.6
REDYELLOW
BLUE
RED
YELLOW
BLUE
BLACKPINK
YELLOWRED
#18 [57]#14 [43]#11 [36]#10 [32]#9 [29]#8 [25]#7 [22]
#6 [19]#5 [16]#4 [13]
NON-SWAGEDLENGTH
N
ENDALLOWANCE
A
MALEINSERTION
H
REBARGAP
G
SPACE(AFTER ASSY)
S
BARINSERTION(AFTER SWAGE)
DIMENSIONS (in)
POSITIONw/ STUDFEMALE
COUPLER WEIGHT(lb)
GRIP–TWIST XTPOSITION
COLOR CODE *
REBARSIZE
US [Metric]
GAA
H NS(BOTH COUPLERS)
FF
STANDARD FEMALE ** TAPER POSITION ASSEMBLY
PRIOR TO ASSEMBLY
GRIP–TWIST® XT POSITION SERIES
ALL DIMENSIONS ARE APPROXIMATE – OTHER TRANSITION SIZES AVAILABLE UPON REQUEST
5/46/5
7/6
8/7
9/810/911/10
YELLOW
BLUE
REDYELLOW
BLUEBLACK
1.281.80
3.83
5.23
6.279.9
10.9
2 11/163 1/16
3 15/164 7/16
4 13/16
5 3/85 5/8
2 1/42 11/16
3 1/163 15/164 7/16
4 13/165 3/8
1 15/162 5/16
3
3 7/163 1/2
44 1/2
15/161 1/8
1 5/161 3/4
2
2 1/82 3/8
1 9/161 7/8
2 7/162 3/42 3/4
3 1/43 5/8
1 13/162 1/8
2 3/43 1/83 1/8
3 5/84 1/16
XT COLOR CODE *
0.611.07
1.57
3.33
4.716.09.1PINK
14/11 RED
YELLOW
BLUE
RED
YELLOWBLUE
BLACKPINK
RED
TRANS.FEMALE
TAPERMALE
30 6 7/8 5 5/8 6 1/8 2 11/16 5 3/16 5 11/1610.7
REBARSIZE
FEMALE MALE
COUPLER WEIGHT(lb)
F M
DIMENSIONS (in)BAR INSERTION
(AFTER SWAGING)REBAR
GAPG
MALEINSERTION
H
ENDALLOWANCE
A
NON-SWAGEDLENGTH
N
HN
AG MF
(LARGER BAR)(SMALLER BAR)
GRIP–TWIST® XT TRANSITION SERIES
ALL DIMENSIONS ARE APPROXIMATE
#4 [13]
#5 [16]
#6 [19]
#7 [22]
#8 [25]
#9 [29]
#10 [32]
#11 [36]
#18 [57]
REDYELLOW
BLUE
REDYELLOW
BLUE
BLACKPINK
YELLOW#14 [43] RED
0.621.18
1.64
3.344.74
5.89.310.6
26
43
26
41
2 1/42 11/16
3 1/163 15/164 7/164 13/16
5 3/85 5/86 7/88 1/2
2 1/42 11/16
3 1/163 15/164 7/164 13/16
5 3/85 5/86 7/88 1/2
1 7/82
2 7/163 1/83 1/23 1/2
4 1/84 5/87 1/87 1/4
15/161 1/8
1 5/161 3/4
2
2 1/8
2 3/82 11/163 1/44 3/8
1 5/161 9/16
1 7/82 7/162 3/42 3/4
3 1/43 5/85 3/16
5 13/16
1 1/21 13/16
2 1/82 3/43 1/83 1/8
3 5/84 1/165 11/16
6 13/16
0.611.07
1.57
3.334.71
6.09.1
10.7
REBARSIZE
US [Metric] FEMALE MALE
TAPER THREADEDGRIP–TWIST XT COLOR CODE *
COUPLER WEIGHT(lb)
F M
DIMENSIONS (in)BAR INSERTION
(AFTER SWAGING)REBAR
GAPG
MALEINSERTION
H
ENDALLOWANCE
A
NON-SWAGEDLENGTH
N
FAG M
H
N
TAPER THREADED GRIP–TWIST® XT
FOR HIGH STRENGTH, LOW CARBON, CHROMIUM STEEL BARS, ASTM A1035 FAST, EFFICIENT INSTALLATION ELIMINATES LONG LAP LENGTHS, REDUCES CONGESTION DEVELOPED STRENGTH – 1.25 x specified yield strength (fy) ASTM A1035 Grades 100 & 120. ULTIMATE CAPACITY – ASTM A1035 Grades 100 & 120, equal to 150 ksi. FULL MECHANICAL SPLICE – ACI 318–19 Chapter 18 - Exceeds specified tensile strength (fu)
ASTM A615 Grade 100, equal to 115 ksi.
COLD–SWAGED STEEL COUPLER WITH TAPER THREADED ENDS & OPTIONAL FLANGEGRIP–TWIST
® XT MECHANICAL SPLICES
®DIMENSIONS AND DATA SHEETINCH-POUND UNITS
REV
.G 0
7/13
/202
0
MEMBER
CRSI®Barsplice Products, Inc., 4900 Webster Street, Dayton OH 45414, USATel: (937) 275-8700 Fax: (937) 275-9566 E-mail: [email protected]
Copyright © 2020, Barsplice Products, Inc., "BPI". All rights reserved. www.barsplice.comMEMBER
DOWNLOAD THE FREE BARSPLICE APP AND FOLLOW US ON SOCIAL MEDIA!
While the information contained in this document is believed to be accurate at the time of publication, BPI reserves the right to make changes, design modifications, corrections and other revisions as it sees fit, without notice. All products described herein are supplied in accordance with BPI’s standard Terms and Conditions of Sale. This document is of a promotional nature only. Aspects of structural design, evaluation of product fitness for use, suitability or similar attributes are the responsibility of others.
BPI ® Equipment is available for lease or purchase.
Equipment must be used in accordance with manuals,
lease agreements, manufacturers’ directions and all safety instructions.
weighs 1,600 lbs [725 kg]
BP2600Bench press for swaging all sizes up to No. 18 [Ø 57mm].
Double acting cylinder produces 300 tons of force connected to 10 or 15 hp pump for high fabrication shop productivity.Press includes foot control, lifting eyes and leveling feet.
#18#14#11#10#9#8#7#6#5#4
TAPER THREADED GRIP–TWIST ® XT – Equipment and Installation
A Bench Press BP2600 fitted with a two-piece die set and powered by an electrically-driven hydraulic pump is used by the rebar fabricator to efficiently swage Grip-Twist® XT coupler components. The equipment operator depresses a foot control to actuate the system. As the ram extends and pushes the dies towards each other, the coupler component is forced to deform around the rebar and interlock with the bar profile. When a swaging bite has been completed, a pressure switch automatically stops the process and the operator retracts the ram for the next bite. For ease of use, swaging dies are color coded to indicate the rebar and coupler size. Color codes are shown on Grip-Twist® XT Dimensions and Data Charts. NOTE: Taper Threaded Grip-Twist® XT coupler components are dimensionally different from standard Grip-Twist® products. Consequently, the swaging dies that are used to swage the Grip-Twist XT components are color coded differently from the swaging dies used to swage standard Grip-Twist products.* COLOR CODE OF COUPLER MUST MATCH COLOR OF DIE SET
** MATCHING THREAD SIZE COINCIDES WITH LARGER, STANDARD GRIP-TWIST ® DoughNUT TM
1 1/81 3/81 9/161 15/162 3/162 3/82 3/42 7/8
3 13/164 5/8
XT04FXT05FXT06FXT07FXT08FXT09FXT10FXT11F
XT18FXT14F
XT04MXT05MXT06MXT07MXT08MXT09MXT10MXT11M
XT18MXT14M
XT05/04FXT06/05FXT07/06FXT08/07FXT09/08FXT10/09FXT11/10F
XT18/14FXT14/11F
XT04MXT05MXT06MXT07MXT08MXT09MXT10M
XT14MXT11M
XT04FXT05FXT06FXT07FXT08FXT09FXT10FXT11F
XT18FXT14F
XT04RPXT05RPXT06RPXT07RPXT08RPXT09RPXT10RPXT11RP
XT18RPXT14RP
XT04PFXT05PFXT06PFXT07PFXT08PFXT09PFXT10PFXT11PF
XT18PFXT14PF
XT04FWFLXT05FWFLXT06FWFLXT07FWFLXT08FWFLXT09FWFLXT10FWFLXT11FWFLXT14FWFL
05TDS06TDS07TDS09TDS10TDS11TDS13TDS14TDS
20TDS18TDS
05TDX06TDX07TDX09TDX10TDX11TDX13TDX14TDX
20TDX18TDX
XT04SCXT05SCXT06SCXT07SCXT08SCXT09SCXT10SCXT11SC
XT18SCXT14SC
#18 [57]#14 [43]#11 [36]#10 [32]#9 [29]#8 [25]#7 [22]#6 [19]#5 [16]#4 [13]
TTGT XTSTRUCTURALCONN. P/NTDX [10Ab]TDS [5Ab]
GRIP-TWIST XT DoughNUT PART NUMBERS **
TTGT XTFLANGED
FEMALE P/NPOSITIONCOUPLERSTUDFEMALE
TAPER GRIP–TWIST XT POSITIONPART NUMBERS
MALETRANSITION
FEMALE
TTGT XT TRANSITIONPART NUMBERS
MALEFEMALE
TAPER GRIP–TWIST XTPART NUMBERS
COUPLEROUTSIDE
DIAMETER (in)
REBARSIZE
US [Metric]
ALL DIMENSIONS ARE APPROXIMATE
0.320.580.831.582.242.84.55.11220
1 1/81 3/8
1 9/161 15/162 3/162 3/82 3/42 7/8
3 13/164 9/16
1 11/162
2 5/163
3 3/83 5/84 1/84 3/85 3/46 5/8
1/41/4
5/167/161/29/165/8
11/167/81
2 1/82 1/2
2 15/163 13/164 3/164 1/2
55 3/87 1/163 5/8
4 5/165 1/8
6
7 3/48 9/169 3/8
10 5/1611 1/4
14 11/1616 9/16
REDYELLOW
BLUERED
YELLOWBLUE
BLACKPINKRED
YELLOW#14 [43]
#18 [57]
#11 [36]#10 [32]#9 [29]#8 [25]#7 [22]#6 [19]#5 [16]#4 [13]
DIMENSIONS (in)OVERALLLENGTH
Lo
REBARGAP
Z
WELD BEVELLENGTH
W
XT STR CONN.LENGTH
C
XT STR CONN.OUTSIDE DIA
D
STRUCTURALCONNECTORWEIGHT (lb)
TAPER THREADEDGRIP-TWIST XT MALE
COLOR CODE *
REBARSIZE
US [Metric]
30°
WC
ØD
ZLo
TTGT XT STRUCTURAL CONNECTORALL DIMENSIONS ARE APPROXIMATE
1 5/81 7/82 3/162 3/4
33 3/83 7/8
45 1/26 1/8
0.38
0.571.021.86
2.343.54
4.975.5
13.523
2 3/162 1/22 7/83 7/84 1/44 5/85 1/45 1/27 1/28 3/8
3 5/84 5/16
56 1/27 1/47 5/88 9/169 3/8
12 3/1614 5/16
7/815/161 1/41 1/21 5/81 7/8
22 1/82 3/43 5/8
0.85
1.151.984.32
5.597.74
10.512.32948#18 [57]
#14 [43]#11 [36]#10 [32]#9 [29]#8 [25]#7 [22]#6 [19]#5 [16]#4 [13]
Wt (lb)D2 (in) TDX SERIES [10Ab]
Wt (lb)D1 (in) TDS SERIES [5Ab]
HEAD DIAMETER AND WEIGHTTHICKNESS(in)B
COMPLETE XT MALESWAGED LENGTH
Lm (in)
REBARSIZE
US [Metric]
BB
D1 D2
Lm
GRIP–TWIST® XT DoughNUT TM
®DIMENSIONS AND DATA SHEETINCH-POUND UNITS