gtm32测试指导手册 · web viewbefore installing the firmware, you need to install stm32...
TRANSCRIPT
深圳市捷泰技术有限公司GEEETECH
How to install firmware for GTM32
www.geeetech.comTel: +86 755 2658 4110Fax: +86 755 2658 4074 -858
1
深圳市捷泰技术有限公司GEEETECH
Install the firmware
1) Before installing the firmware, you need to install STM32 ST-LINK
Utility. Please note that this software can only run in windows OS.
You can download it here:http://www.st.com/web/catalog/tools/FM147/SC1887/PF258168
2) Install STM32 ST-LINK Utility
Unzip the software you download before and double click to install
it.
www.geeetech.comTel: +86 755 2658 4110Fax: +86 755 2658 4074 -858
2
1
深圳市捷泰技术有限公司GEEETECH
Click next to finish the installation.
www.geeetech.comTel: +86 755 2658 4110Fax: +86 755 2658 4074 -858
3
2
深圳市捷泰技术有限公司GEEETECH
www.geeetech.comTel: +86 755 2658 4110Fax: +86 755 2658 4074 -858
4
3
深圳市捷泰技术有限公司GEEETECH
www.geeetech.comTel: +86 755 2658 4110Fax: +86 755 2658 4074 -858
5
4
深圳市捷泰技术有限公司GEEETECH
3) Use the ST-LINK to connect GTM32 to the PC. The wirings for the
ST-LINK is as the picture shows:
ST-LINK GTM32+5V VCC
SWDIO SWDIO
SWCLK SWCLK
GND GND
www.geeetech.comTel: +86 755 2658 4110Fax: +86 755 2658 4074 -858
6
5
深圳市捷泰技术有限公司GEEETECH
Note: VCC for the ST LINK is 5V. And please mind the GND and
VCC, wrongly connected will burn the board!
www.geeetech.comTel: +86 755 2658 4110Fax: +86 755 2658 4074 -858
7
6
深圳市捷泰技术有限公司GEEETECH
Open STM32 ST-LINK Utility:
www.geeetech.comTel: +86 755 2658 4110Fax: +86 755 2658 4074 -858
8
7
深圳市捷泰技术有限公司GEEETECH
①Change the size to 0x0007FFFF
www.geeetech.comTel: +86 755 2658 4110Fax: +86 755 2658 4074 -858
9
8
深圳市捷泰技术有限公司GEEETECH
②Click , and choose the GTM32.hex file.(the firmware)
③Click to connect to the board. If succeeded, you can get those
codes:13:55:52 : ST-LINK SN : 48FF71064977554859362387
13:55:52 : ST-LINK Firmware version : V2J17S4 (Need Update)
13:55:52 : Connected via SWD.
13:55:52 : Connection mode : Normal.
13:55:52 : Debug in Low Power mode enabled.
www.geeetech.comTel: +86 755 2658 4110Fax: +86 755 2658 4074 -858
10
9
深圳市捷泰技术有限公司GEEETECH
13:55:52 : Device ID:0x414
13:55:52 : Device flash Size : 512KBytes
www.geeetech.comTel: +86 755 2658 4110Fax: +86 755 2658 4074 -858
11
10
深圳市捷泰技术有限公司GEEETECH
Click④ to erase the chip first.
www.geeetech.comTel: +86 755 2658 4110Fax: +86 755 2658 4074 -858
12
11
深圳市捷泰技术有限公司GEEETECH
Click⑤ , click start button in the pop-up window to install the
firmware:
When finish you can see the codes here:14:00:11 : Flash memory programmed in 12s and 137ms.
14:00:11 : Verification...OK
www.geeetech.comTel: +86 755 2658 4110Fax: +86 755 2658 4074 -858
13
12
深圳市捷泰技术有限公司GEEETECH
Now we have finished installing the firmware for GTM32.
www.geeetech.comTel: +86 755 2658 4110Fax: +86 755 2658 4074 -858