gujarat water supply & sewerage board, gandhinagar
TRANSCRIPT
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
PE-80 20 to 400 mmPN - 2.5 to PN
16
PE-100 20 to 400 mmPN - 6 to
PN 16
90 to 315 mm (Except 125 mm)
PN - 2.5
50 to 315 mm (Except 125 mm)
PN - 4
40 to 315 mm (Except 125 mm)
PN - 6
32 to 315 mm (Except 125 mm)
PN -8
25 to 315 mm (Except 125 mm)
PN -10
50 to 315 mm (Except 125 mm)
PN - 6
40 to 315 mm (Except 125 mm)
PN -8
32 to 315 mm (Except 125 mm)
PN -10
90 to 250 mm PN - 2.550 to 250 mm PN - 440 to 250 mm PN - 632 to 250 mm PN -825 to 250 mm PN -1020 to 180 mm PN -12.5
110 to 180 mm PN - 1650 to 250 mm PN - 640 to 250 mm PN -832 to 250 mm PN -1025 to 250 mm PN -12.5110 to 180 mm PN - 16
90 to 140 mm & 160 to 400 mm
PN - 2.5
50 to 140 mm & 160 to 400 mm
PN - 4
40 to 400 mm PN - 632 to 400 mm PN -825 to 400 mm PN -1020 to 200 mm PN -12.520 to 200 mm PN - 1650 to 400 mm PN - 640 to 400 mm PN -832 to 400 mm PN -1025 to 200 mm PN -12.520 to 200 mm PN - 16
108/1/6, Surangi Road, Opp. Khadoli Power House sub station, Khadoli, Silvassa-
[email protected]@kisangroup.co
m
PE-80
30-6-2021
4M/s. Kisan Irrigation & Infrastructure ltd.,
Mumbai
Unit -2 , Plot No. 91-110, Sector -3, Pithampur, Dist- Dhar (MP)-
454 775rajesh.sharma@kisanirrigation
PE- 80
30-6-2021 -
PE-100
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of HDPE (PE-80 & 100) Pipes (IS-4984) with ISI mark as per
Vendor Selection Report submitted by Different TPI (As on dt. 13-7-2021)
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
M/s. Kothari Agritech Pvt. Ltd., Solapur
Plot no. 185 to 193, Chandramauli industrial co-op
estate, Mohol, Solapur-413 213, Maharastra
[email protected]@kotharipipes.co.in
PE-80
30-6-2021
1M/s. Reliance
Industries Ltd., Hazira
Reliance Industries Ltd, Relpipe Plant, Village-Mora, Post-
Bhatha, Hazira, [email protected]
30-6-2021
-
PE-100
2
-
PE-100
3M/s. Kisan Moulding
Ltd., Silavasa
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
90 to 250 mm PN - 2.550 to 250 mm PN - 440 to 250 mm PN - 632 to 250 mm PN -825 to 250 mm PN -1050 to 250 mm PN - 640 to 250 mm PN -832 to 250 mm PN -1090 to 630 mm PN - 2.550 to 630 mm PN - 440 to 630 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 400 mm PN -12.520 to 315 mm PN - 1650 to 630 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 400 mm PN -12.520 to 315 mm PN - 1640 to 315 mm PN - 632 to 315 mm PN -825 to 180 mm PN -1020 to 110 mm PN -12.520 to 110 mm PN -1650 to 315 mm PN - 640 to 315 mm PN -832 to 315 mm PN -1090 to 400 mm PN - 2.550 to 315 mm PN - 440 to 400 mm PN - 632 to 315 mm PN -825 to 315 mm PN -1050 to 400 mm PN - 6
40 to 315 mm PN -8
32 to 315 mm PN -10
90 to 180 mm PN - 2.540 to 180 mm PN - 432 to 180 mm PN - 632 to 180 mm PN -832 to 180 mm PN -10
50 to 110 mm & 200 to 400 mm
PN - 6
40 to 110 mm & 200 to 400 mm
PN -8
32 to 110 mm & 200 to 400 mm
PN -10
20 to 50 mm PN -12.520 to 50 mm PN - 16
90 to 315 mm PN - 2.550 to 315 mm PN - 440 to 315 mm PN - 632 to 315 mm PN -825 to 315 mm PN -1050 to 315 mm PN - 640 to 315 mm PN -832 to 315 mm PN -10
PE-80
30-6-2021
PE-100
M/s. Mohit Polytech Pvt. Ltd., Jaipur
F-139, Road no. 6, RIICO Industrial Area, Bindayaka,
8M/s. Jet Fibre India
Pvt. Ltd., Ahmedabad
Shed No. 658, Suvey No. 909/1 & 2, Pursottam farm,
(Bhudarpura) Mahij, Kheda-387 120
[email protected],[email protected]
PE-80
30-6-2021
PE-100
-
Plot no. G-922, Lodhika GIDC, Gate no.3, Kishan Gate Main Road, Kalavad Road, Metoda,
Rajkot-360 [email protected]
m
M/s. Khyati Polymers, Rajkot
7 30-6-2021
PE-80
PE-100
-
PE-100
5M/s. Meghdoot Polypipes, Jaipur
G-1-198, Road No. 10, Bindayaka Industrial Area,
Phase-II, [email protected]
PE- 80
30-6-2021
6M/s. Noble Polymers,
Silvassa
Sr. No. 132/1/1/4, 96/2/2 & 95/1/2, B/H. Prince Pipes, Village :- Athal, Silvassa-
396230, UT of Dadra & Nagar Haveli.
PE-80
30-6-2021 -
PE-100
10
PE-80
PE-100
9M/s. Miraj Pipes & Fittings Pvt. Ltd.,
Udaipur
Opp. Gangotri, Badi Thur Road, Feniyon ka Guda, Udaipur,
n
30-6-2021
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
90 to 500 mm PN - 2.550 to 500 mm PN - 440 to 500 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 500 mm PN -12.520 to 400 mm PN - 1650 to 500 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 500 mm PN -12.520 to 500 mm PN - 1690 to 500 mm PN - 2.550 to 500 mm PN - 440 to 500 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 500 mm PN -12.520 to 450 mm PN - 1650 to 500 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 500 mm PN -12.520 to 500 mm PN - 1690 to 315 mm PN - 2.550 to 315 mm PN - 440 to 450 mm PN - 632 to 450 mm PN -825 to 450 mm PN -1020 to 250 mm PN -12.520 to 250 mm PN - 1650 to 450 mm PN - 640 to 450 mm PN -832 to 450 mm PN -1025 to 250 mm PN -12.520 to 250 mm PN - 1640 to 315 mm PN - 632 to 180 mm PN -825 to 180 mm PN -1020 to 110 mm PN -12.520 to 110 mm PN - 1650 to 315 mm PN - 640 to 315 mm PN -832 to 315 mm PN -1025 to 110 mm PN -12.520 to 110 mm PN - 1690 to 450 mm PN - 2.550 to 450 mm PN - 440 to 200 mm PN - 632 to 450 mm PN -832 to 450 mm PN -1032 to 90 mm PN -12.550 to 90 mm PN - 16
50 to 450 mm PN - 640 to 450 mm PN -832 to 450 mm PN -1032 to 90 mm PN -12.550 to 90 mm PN - 16
PE-100
PE-80
30-6-2021
PE-100
PE-80
PE-100
Survey No. 156/157. Ribda Lodhika Road, Near Makhawad
Chokdi, Makhavad, Rajkot-360035
[email protected]@natarajpolyplast.com
M/s. Parvati Agro Plast, Sangli
(Maharashtra)
PE-100
PE-80
30-6-2021M/s. Dinesh Irrigation
Pvt. Ltd., Jaipur
86B & 86B-II, Jhotwara Industrial Area, [email protected]@dineshirrigation.com
30-6-2021
11-2-2022M/s. Nataraj
Polyplast Pvt. Ltd., Rajkot
15
UNIT-II, Gate NO. 11/1, Bamnoli, Taluka: Miraj, District:-
Sangli, [email protected]
PE-80
14M/s. Sarovar
Polymers Pvt. Ltd., Rajkot
27/28, Atul Industrial Estate, Opp. Jyoti CNC & Pathak
School, B/h. Akshar Weight Bridge, Kalawad Road, Metoda
GIDC, [email protected]
13
M/s. Tufropes Private Limited, Silvassa
(Formerly known as M/s. Polysil Irrigation
Systems Pvt. Ltd., Silvassa)
Survey No. 137/1, Madhuban Road, Village:- Karad, Silvassa-
396 230, D & NH
[email protected]@polysilpipes.co
m
PE-80
30-6-2021
PE-100
12
11
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
90 to 110 mm PN - 2.550 to 110 mm PN - 440 to 110 mm PN - 632 to 110 mm PN -832 to 110 mm PN -1032 to 110 mm PN -12.532 to 110 mm PN - 1650 to 110 mm PN - 640 to 110 mm PN -832 to 110 mm PN -1032 to 110 mm PN -12.532 to 110 mm PN - 16
32 to 110 mm SDR:17 PN - 6
32 to 110 mm SDR:13.6 PN -8
32 to 110 mm SDR:11 PN -10
32 to 110 mm SDR:9 PN -12.5
32 to 110 mm SDR: 7.4 PN - 16
40 to 110 mm SDR:21 PN - 6
32 to 110 mm SDR:17 PN -8
32 to 110 mm SDR:13.6 PN -10
32 to 110 mm SDR: 11 PN -12.5
32 to 110 mm SDR: 9 PN - 16
90 to 500 mmPN - 2.5(SDR 41)
50 to 500 mmPN - 4.0(SDR 26)
40 to 500 mmPN - 6.0(SDR 17)
32 to 500 mmPN - 8.0
(SDR 13.6)
25 to 500 mmPN - 10
(SDR 11)
50 to 500 mmPN - 6.0(SDR 21)
40 to 500 mmPN - 8.0(SDR 17)
32 to 500 mmPN - 10
(SDR 13.6)
PE-80
PE-100
Plot No. 1051, Nr. Kothiya Patiya,
Kuha Gam Road, Kathwada-Indore Highway,
Ta:- Daskroi, Ahmedabad-382433
M/s. Chamunda Plastic Pvt. Ltd.,
Daskroi (Ahmedabad)18 9-2-2024
PE-80
PE-100
11-2-2022Near Murakhda's Patiya, At-
Murakhda, Tal.:- Upleta, [email protected]
M/s. Shrinathji Polyplast, Rajkot
16
PE-80
30-6-2021
PE-100
17M/s. Falcon Pipes Pvt.
Ltd., Rajkot
Survey No. 55/1, Village:- Sadak Pipaliya, NH-27, Bharudi Toll
Plaza, Gondal, [email protected]
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
75 to 630 mmPN - 2.5(SDR 41)
50 to 630 mmPN - 4.0(SDR 26)
32 to 630 mmPN - 6.0(SDR 17)
25 to 630 mmPN - 8.0
(SDR 13.6)
20 to 630 mmPN - 10
(SDR 11)
16 to 500 mmPN 12.5(SDR 9)
16 to 500 mmPN 16
(SDR 7.4)
75 to 200 mmPN - 3.0(SDR 41)
75 to 200 mmPN - 4.0(SDR 33)
40 to 630 mmPN - 6.0(SDR 21)
32 to 630 mmPN - 8.0(SDR 17)
25 to 630 mmPN - 10
(SDR 13.6)
20 to 500 mmPN 12.5
(SDR 11)
16 to 500 mmPN 16
(SDR 9)
90 to 110 mmPN - 2.5(SDR 41)
50 to 110 mmPN - 4.0(SDR 26)
32 to 110 mmPN - 6.0(SDR 17)
32 to 110 mmPN - 8.0
(SDR 13.6)
25 to 110 mmPN - 10
(SDR 11)
20 to 110 mmPN 12.5(SDR 9)
20 to 110 mmPN 16
(SDR 7.4)
110 mmPN - 4.0(SDR 33)
50 to 110 mmPN - 6.0(SDR 21)
40 to 110 mmPN - 8.0(SDR 17)
32 to 110 mmPN - 10
(SDR 13.6)
25 to 110 mmPN 12.5
(SDR 11)
20 to 110 mmPN 16
(SDR 9)
PE-80
25-4-2024
PE-80
25-4-2024
PE-100
Survey No:- 365/1, At & post: Chadotar, Gadh Road, Ta- Palanpur, Dist-
Banaskantha, Gujarat (India)-385001
[email protected] [email protected]
M/s. Duke Pipes Pvt. Ltd., Palanpur
20
PE-100
Survey No. 108/P, Nr. Toll Plaza, Rajkot-Gondal National
Highway-27, At. Bhunava, Gondal, Rajkot-360311 [email protected]
19M/s. Kelvin Plastic
Pvt. Ltd., Rajkot
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
75 to 110 mmPN 2.0
(SDR 41)
75 to 110 mmPN - 2.5
(SDR 41, 33)
75 to 110 mmPN - 3.0(SDR 41)
75 to 110 mmPN - 4.0(SDR 33)
50 to 110 mmPN - 4.0
(SDR 21,26)
50 to 110 mmPN - 5.0(SDR 26)
40 to 110 mmPN - 5.0(SDR 21)
32 to 110 mmPN - 5.0(SDR 17)
40 to 110 mmPN - 6.0(SDR 21)
32 to 110 mmPN - 6.0(SDR 17)
32 to 110 mmPN - 8.0(SDR 17)
25 to 110 mmPN - 8.0
(SDR 11,13.6)
25 to 110 mmPN - 10(SDR
11,13.6)
75 to 110 mmPN 2.0
(SDR 41)
75 to 110 mmPN - 2.5
(SDR 41, 33)
75 to 110 mmPN - 3.0(SDR 41)
75 to 110 mmPN - 4.0(SDR 33)
50 to 110 mmPN - 4.0
(SDR 21,26)
50 to 110 mmPN - 5.0(SDR 26)
40 to 110 mmPN - 5.0(SDR 21)
32 to 110 mmPN - 5.0(SDR 17)
40 to 110 mmPN - 6.0(SDR 21)
32 to 110 mmPN - 6.0(SDR 17)
32 to 110 mmPN - 8.0(SDR 17)
25 to 110 mmPN - 8.0
(SDR 11, 13.6)
25 to 110 mmPN - 10
(SDR 11,13.6)
PE-100
'25-4-2024PE-80
S.No. 182P to 185P, Sanand-Bavla Road, Nani Devti, Sanand,
Ahmedabad-382220 [email protected]
[email protected]/s. I.M.F. Polymer
LLP, Sanand
21
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
90 to 800 mmPN - 2.5(SDR 41)
50 to 800 mmPN - 4.0(SDR 26)
40 to 800 mmPN - 6.0(SDR 17)
32 to 710 mmPN - 8.0
(SDR 13.6)
25 to 630 mmPN - 10
(SDR 11)
20 to 450 mmPN 12.5(SDR 9)
20 to 400 mmPN 16
(SDR 7.4)
200 to 400 mmPN - 4.0(SDR 33)
50 to 800 mmPN - 6.0(SDR 21)
40 to 800 mmPN - 8.0(SDR 17)
32 to 800 mmPN - 10
(SDR 13.6)
25 to 630 mmPN 12.5
(SDR 11)
20 to 500 mmPN 16
(SDR 9)
75 to 630 mmPN - 2.5(SDR 41)
75 to 630 mmPN - 3.2(SDR 33)
50 to 630 mmPN - 4.0(SDR 26)
50 to 630 mmPN - 5.0(SDR 21)
40 to 630 mmPN - 6.0(SDR 17)
25 to 630 mmPN - 8.0
(SDR 13.6)
20 to 630 mmPN - 10
(SDR 11)
20 to 355 mmPN 12.5(SDR 9)
20 to 355 mmPN 16
(SDR 7.4)
75 to 500 mmPN - 3.0(SDR 41)
75 to 500 mmPN - 4.0(SDR 33)
50 to 630 mmPN - 5.0(SDR 26)
50 to 630 mmPN - 6.0(SDR 21)
40 to 630 mmPN - 8.0(SDR 17)
32 to 630 mmPN - 10
(SDR 13.6)
32 to 355 mmPN 12.5
(SDR 11)
32 to 355 mmPN 16
(SDR 9)
PE-80
25-4-2024
PE-100
Unit no. III, Gat no. 47, 47/2, 48 to 50, 55 to 66, 70, 72 & 73, Jalgaon-Aurangabad State
Highway, At. Post Gadegaon, Tal. Jamner, Jalgaon-425114
M/s. Supreme Industries Ltd.,
Jalgaon22
PE-80
25-4-2024
PE-100
SP2-123/123A,RIICO Industries Area, Manda Near Kaladera, Chomu, Jaipur (Raj)-302023 [email protected]
M/s. Nimbus Pipes Limited, Jaipur
23
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
75 to 180 mmPN - 2.5(SDR 41)
50 to 180 mmPN - 4.0(SDR 26)
32 to 110 mmPN - 6.0(SDR 17)
25 to 180 mmPN - 8.0
(SDR 13.6)
20 to 110 mmPN - 10
(SDR 11)
16 to 110 mmPN 12.5(SDR 9)
40 to 180 mmPN - 6.0(SDR 21)
32 to 180 mmPN - 8.0(SDR 17)
25 to 110 mmPN - 10
(SDR 13.6)
20 to 110 mmPN 12.5
(SDR 11)
16 to 110 mmPN 16
(SDR 9)
75 to 500 mmPN - 2.5(SDR 41)
75 to 500 mmPN - 3.2(SDR 33)
50 to 500 mmPN - 4.0(SDR 26)
40 to 500 mmPN - 5.0(SDR 21)
32 to 500 mmPN - 6.0(SDR 17)
25 to 500 mmPN - 8.0
(SDR 13.6)
20 to 500 mmPN - 10
(SDR 11)
16 to 500 mmPN 12.5(SDR 9)
16 to 500 mmPN 16
(SDR 7.4)
16 to 500 mmPN 20
(SDR 6)
75 to 500 mmPN - 3.0(SDR 41)
75 to 500 mmPN - 4.0(SDR 33)
50 to 500 mmPN - 5.0(SDR 26)
40 to 500 mmPN - 6.0(SDR 21)
32 to 500 mmPN - 8.0(SDR 17)
25 to 500 mmPN - 10
(SDR 13.6)
20 to 500 mmPN 12.5
(SDR 11)
16 to 500 mmPN 16
(SDR 9)
16 to 500 mmPN 20
(SDR 7.4)
PE-80
25-4-2024
PE-100
Survey no.-589, 590/2, Harsol-Ahmedabad Road, At & PO- Harsol, Talod, [email protected]
M/s. Vinayak Polypipes Pvt. Ltd.,
Talod25
PE-80
25-4-2024
PE-100
24M/S. Balson Polyplast
PVT.LTD., Rajkot
R.S. No. 13/2 p1, Plot No. 4, NH 27, Opp. Sadak Pipaliya Gate,
Village: Sadak Pipaliya, Ta: Gondal, Dist. Rajkot- 360 [email protected]
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
75 to 200 mmPN - 2.5(SDR 41)
50 to 200 mmPN - 4.0(SDR 26)
32 to 200 mmPN - 6.0(SDR 17)
25 to 200 mmPN - 8.0
(SDR 13.6)
20 to 200 mmPN - 10
(SDR 11)
20 to 200 mmPN 12.5(SDR 9)
20 to 200 mmPN 16
(SDR 7.4)
225 to 450 mmPN - 3.0(SDR 41)
225 to 450 mmPN - 4.0(SDR 33)
225 to 450 mmPN - 5.0(SDR 26)
40 to 450 mmPN - 6.0(SDR 21)
32 to 450 mmPN - 8.0(SDR 17)
25 to 450 mmPN - 10
(SDR 13.6)
20 to 200 mmPN 12.5
(SDR 11)
20 to 200 mmPN 16
(SDR 9)
32 to 110 mmPN - 6.0(SDR 17)
32 to 110 mmPN - 8.0
(SDR 13.6)
25 to 110 mmPN - 10
(SDR 11)
20 to 110 mmPN 12.5(SDR 9)
20 to 110 mmPN 16
(SDR 7.4)
125 to 250 mmPN - 5.0(SDR 26)
40 to 250 mmPN - 6.0(SDR 21)
40 to 250 mmPN - 8.0(SDR 17)
32 to 250 mmPN - 10
(SDR 13.6)
25 to 110 mmPN 12.5
(SDR 11)
20 to 110 mmPN 16
(SDR 9)
PE-80'25-4-2024
PE-100
Plot No. G/1/C, Nr. Almighty gate, Kalawad Road, Ta-
Lodhika, Dist. Rajkot, GIDC-Metoda-360021 (Gujarat) [email protected]
M/s. Dolphin Polyplast Pvt. Ltd.,
Rajkot
26
PE-80
25-4-2024
PE-100
27M/S. Darshan Pipe,
Rajkot
Survey No. 156, Paiki plot No. 3, Rajkot-Jamnagar Highway, opp.
Radio Station, At Naranka, Taluka : padadhari, Dis.:-
Rajkot, Gujrat-360110 [email protected]
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
90 to 180 mmPN - 2.5(SDR 41)
50 to 180 mmPN - 4.0(SDR 26)
40 to 180 mmPN - 6.0(SDR 17)
32 to 180 mmPN - 8.0
(SDR 13.6)
25 to 180 mmPN - 10
(SDR 11)
20 to 180 mmPN 12.5(SDR 9)
50 to 180 mmPN - 6.0(SDR 21)
40 to 180 mmPN - 8.0(SDR 17)
32 to 180 mmPN - 10
(SDR 13.6)
25 to 180 mmPN 12.5
(SDR 11)
PE-80 40 to 140 mmPN - 6.0(SDR 17)
50 to 180 mmPN - 6.0(SDR 21)
32 to 160 mmPN - 10
(SDR 13.6)
90 to 800 mmPN - 2.5(SDR 41)
50 to 800 mmPN - 4.0(SDR 26)
40 to 800 mmPN - 6.0(SDR 17)
32 to 630 mmPN - 8.0
(SDR 13.6)
25 to 500 mmPN - 10
(SDR 11)
20 to 315 mmPN 12.5(SDR 9)
1000 mmPN - 5.0(SDR 26)
50 to 1000 mm(Except 900 mm)
PN - 6.0(SDR 21)
40 to 1000 mm(Except 900 mm)
PN - 8.0(SDR 17)
32 to 710 mm(Except 560 mm)
PN - 10(SDR 13.6)
25 to 315 mmPN 12.5
(SDR 11)
20 to 315 mmPN 16
(SDR 9)
PE-80
25-4-2024
PE-100
Plot no. 76-79, B/h. Kisan Dehydration, Village
Bhojpara,Ta.:- Gondal, Dist.:- Rajkot- 360 311
M/S. CAPITAL POLYPLAST PVT.LTD.,
Rajkot28
25-4-2024PE-100
Mayfair Compund, N.H. No-8, Shamlaji Road, Nr.
Sahkari jin, Himatnagar-383001, Gujarat
M/S. Mayfair Polymers Pvt.Ltd.,
Himmatnagar29
PE-80
25-4-2024
PE-100
New Survey No. 1291/ Old Survey no. 146/P-2, & 114/p1, Nr Raymond's Ltd, Motiwada,
NH 4, Killa Pardi, Dist. Valsad Gujarat-396125
[email protected] [email protected]
M/S. Sangir Plastics Pvt. Ltd., Valsad
30
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
40 to 450 mmPN - 5
(SDR 21)
32 to 450 mmPN - 6.0(SDR 17)
25 to 450 mmPN - 8.0
(SDR 13.6)
20 to 450 mmPN - 10
(SDR 11)
50 to 450 mmPN - 5.0(SDR 26)
40 to 450 mmPN - 6.0(SDR 21)
40 to 450 mmPN - 8.0(SDR 17)
40 to 450 mmPN - 10
(SDR 13.6)
125 to 450 mmPN - 2.5(SDR 41)
50 to 450 mmPN - 4.0(SDR 26)
40 to 630 mmPN - 6.0(SDR 17)
32 to 630 mmPN - 8.0
(SDR 13.6)
25 to 630 mmPN - 10
(SDR 11)
20 to 450 mmPN 12.5(SDR 9)
20 to 400 mmPN 16
(SDR 7.4)
50 to 630 mmPN - 6.0(SDR 21)
40 to 630 mmPN - 8.0(SDR 17)
32 to 630 mmPN - 10
(SDR 13.6)
25 to 450 mmPN 12.5
(SDR 11)
20 to 450 mmPN 16
(SDR 9)
90 to 630 mmPN - 2.5(SDR 41)
50 to 630 mmPN - 4.0(SDR 26)
40 to 500 mmPN - 6.0(SDR 17)
40 to 315 mmPN - 8.0
(SDR 13.6)
25 to 315 mmPN - 10
(SDR 11)
25 to 200 mmPN 12.5(SDR 9)
50 to 630 mmPN - 6.0(SDR 21)
40 to 315 mmPN - 8.0(SDR 17)
32 to 630 mmPN - 10
(SDR 13.6)
25 to 200 mmPN 12.5
(SDR 11)
PE-80
25-4-2024
PE-100
31M/S. ARON PIPES PVT.LTD., Surat
Block no.- 187, Plot No 1 to 21, Karanj, Kim- Mandvi highway,
Mandvi, Surat-394110 [email protected] [email protected]
PE-80'25-4-2024
PE-100
39,44A, Industrial Area,Ratlam(457001)
M/s. Kataria Plastics Pvt. Ltd., Ratlam
32
PE-80
25-4-2024
PE-100
Block No. 642, NH 8, At Hariyala, Kheda
M/s. Dutron Polymers Limited,
Kheda33
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
90 to 400 mmPN - 2.5(SDR 41)
200 to 400 mmPN - 3.2(SDR 33)
50 to 400 mmPN - 4.0(SDR 26)
200 to 400 mmPN - 5
(SDR 21)
50 to 400 mmPN - 6.0(SDR 17)
32 to 400 mmPN - 8.0
(SDR 13.6)
25 to 400 mmPN - 10
(SDR 11)
16 to 180 mmPN 12.5(SDR 9)
16 to 180 mmPN 16
(SDR 7.4)
16 to 180 mmPN 20
(SDR 6)
200 to 400 mmPN - 3.0(SDR 41)
200 to 400 mmPN - 4.0 (SDR
33)
200 to 400 mmPN - 5.0 (SDR
26)
50 to 400 mmPN - 6.0(SDR 21)
40 to 400 mmPN - 8.0(SDR 17)
32 to 400 mmPN - 10
(SDR 13.6)
20 to 180 mmPN 12.5
(SDR 11)
20 to 180 mmPN 16
(SDR 9)
20 to 180 mmPN 20
(SDR 7.4)
PE-80
12/07/2024
PE 100
18 to 21, Narayan Industrial Park,
Nr. Shiv Bhumi Estate, Village: Kubadthal,
Ta:- Daskroi, AhmedabadE-mail:- [email protected]
M/s. Rainson Pipe Industries,
Ahmedabad34
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
75 to 500 mmPN - 2.5(SDR 41)
50 to 500 mmPN - 4.0(SDR 26)
32 to 500 mmPN - 6.0(SDR 17)
25 to 500 mmPN - 8.0
(SDR 13.6)
20 to 500 mmPN - 10
(SDR 11)
20 to 500 mmPN 12.5(SDR 9)
20 to 400 mmPN 16
(SDR 7.4)
40 to 500 mmPN - 6.0(SDR 21)
32 to 500 mmPN - 8.0(SDR 17)
25 to 500 mmPN - 10
(SDR 13.6)
20 to 500 mmPN 12.5
(SDR 11)
20 to 500 mmPN 16
(SDR 9)
90 to 1000 mmPN - 2.5(SDR 41)
50 to 1000 mmPN - 4.0(SDR 26)
32 to 1000 mmPN - 6.0(SDR 17)
32 to 710 mmPN - 8.0
(SDR 13.6)
20 to 630 mmPN - 10
(SDR 11)
20 to 500 mmPN 12.5(SDR 9)
16 to 400 mmPN 16
(SDR 7.4)
75 to 1200 mmPN - 3.0(SDR 41)
75 to 1200 mmPN - 4.0 (SDR
33)
50 to 500 mm & 1200 mmPN - 5.0 (SDR
26)
40 to 1200 mmPN - 6.0(SDR 21)
40 to 1000 mmPN - 8.0(SDR 17)
25 to 1000 mmPN - 10
(SDR 13.6)
25 to 630 mmPN 12.5
(SDR 11)
16 to 500 mmPN 16
(SDR 9)
16 to 180 mmPN 20
(SDR 7.4)
PE-80
PE 100
Plot no. 109/110/111, Old highway, Bamnbore GIDC,
Bamnbore, Chotila, surendranagar
[email protected] balbhadra.jadeja@sagarpolym
ers.com
M/s. Sagar Polytechnik Ltd.,
Rajkot35 12/07/2024
36
PE-80
PE-100
12/07/2024
Jain Plastics Park, N.H. no. 6, P.O. Box 72, Bambhori, Jalgaon-
425001, [email protected]
M/s. Jain Irrigation Systems Ltd., Jalgaon
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
75 to 315 mmPN - 2.5(SDR 41)
75 to 315 mmPN - 3.2(SDR 33)
50 to 315 mmPN - 4.0(SDR 26)
40 to 315 mmPN - 5
(SDR 21)
32 to 315 mmPN - 6.0(SDR 17)
25 to 315 mmPN - 8.0
(SDR 13.6)
20 to 315 mmPN - 10
(SDR 11)
20 to 200 mmPN 12.5(SDR 9)
20 to 200 mmPN 16
(SDR 7.4)
75 to 315 mmPN - 3.0(SDR 41)
75 to 315 mmPN - 4.0 (SDR
33)
50 to 315 mmPN - 5.0 (SDR
26)
40 to 315 mmPN - 6.0(SDR 21)
32 to 315 mmPN - 8.0(SDR 17)
25 to 315 mmPN - 10
(SDR 13.6)
25 to 315 mmPN 12.5
(SDR 11)
20 to 315 mmPN 16
(SDR 9)
PE-80
PE 100
98, Bahadarpur Road, Burhanpur, Madhya Pradesh-
M/s. Texmo Pipes & Products Ltd.,
Burhanpur (MP)37 12/07/2024
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
200 to 500 mmPN - 2.5(SDR 41)
200 to 500 mmPN - 4.0(SDR 26)
200 to 500 mmPN - 6.0(SDR 17)
200 to 500 mmPN - 8.0
(SDR 13.6)
200 to 500 mmPN - 10
(SDR 11)
20 to 450 mmPN 12.5(SDR 9)
20 to 400 mmPN 16
(SDR 7.4)
560 to 630 mmPN - 3.0(SDR 41)
560 to 630 mmPN - 4.0 (SDR
33)
560 to 630 mmPN - 5.0 (SDR
26)
20 to 630 mmPN - 6.0(SDR 21)
20 to 630 mmPN - 8.0(SDR 17)
20 to 630 mmPN - 10
(SDR 13.6)
560 to 630 mmPN 12.5
(SDR 11)
560 to 630 mmPN 16
(SDR 9)
560 to 630 mmPN 20
(SDR 7.4)
75 to 315 mmPN - 2.5(SDR 41)
50 to 315 mmPN - 4.0(SDR 26)
32 to 315 mmPN - 6.0(SDR 17)
25 to 315 mm.PN - 8.0
(SDR 13.6)
20 to 315 mmPN - 10
(SDR 11)
20 to 315 mmPN 12.5(SDR 9)
20 to 315 mmPN 16
(SDR 7.4)
355 to 500 mmPN - 5.0 (SDR
26)
40 to 500 mmPN - 6.0(SDR 21)
32 to 315 mmPN - 8.0(SDR 17)
25 to 315 mmPN - 10
(SDR 13.6)
20 to 315 mmPN 12.5
(SDR 11)
20 to 315 mmPN 16
(SDR 9)
38 12/07/2024
PE- 80
PE 100
Elegant Polymers, At-Navagam (Bamanbore), Survey No:- 96,
Nr.- High School Taluka:- Chotila, Surendranagar.
M/s. Elegant Polymers,
Surendranagar12/07/202439
PE-80
PE-100
Plot no. 462-465 , Sector-3, Industrial Area, Pithampur,
Dhar, Madhya [email protected]
M/s. Signet Industries Ltd., Dhar (MP)
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
75 to 200 mmPN - 2.5(SDR 41)
75 to 200 mmPN - 3.2(SDR 33)
50 to 200 mmPN - 4.0(SDR 26)
40 to 200 mmPN - 5
(SDR 21)
32 to 200 mmPN - 6.0(SDR 17)
25 to 200 mmPN - 8.0
(SDR 13.6)
20 to 200 mmPN - 10
(SDR 11)
16 to 200 mmPN 12.5(SDR 9)
16 to 200 mmPN 16
(SDR 7.4)
16 to 200 mmPN 20
(SDR 6)
75 to 200 mmPN - 3.0(SDR 41)
75 to 200 mmPN - 4.0 (SDR
33)
50 to 200 mmPN - 5.0 (SDR
26)
40 to 200 mmPN - 6.0(SDR 21)
32 to 200 mmPN - 8.0(SDR 17)
25 to 200 mmPN - 10
(SDR 13.6)
20 to 200 mmPN 12.5
(SDR 11)
16 to 200 mmPN 16
(SDR 9)
16 to 200 mmPN 20
(SDR 7.4)
PE 100
PE- 80
12/07/2024
R K Industrieal Zone-8, Wankaner-Kuwadava Chowkdi,
Dist:- Rajkot at-Ranpur Navagam
M/s. Idol Polytech Pvt. Ltd. , Rajkot
40
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
75 to 315 mmPN - 2.5(SDR 41)
50 to 315 mmPN - 4.0(SDR 26)
50 to 315 mmPN - 6.0(SDR 17)
32 to 315 mmPN - 8.0
(SDR 13.6)
25 to 315 mmPN - 10
(SDR 11)
20 to 315 mmPN 12.5(SDR 9)
20 to 315 mmPN 16
(SDR 7.4)
20 to 315 mmPN - 6.0(SDR 21)
40 to 315 mmPN - 8.0(SDR 17)
32 to 315 mmPN - 10
(SDR 13.6)
25 to 315 mmPN 12.5
(SDR 11)
20 to 315 mmPN 16
(SDR 9)
20 to 315 mmPN 20
(SDR 7.4)
90 to 1000 mmPN - 2.5(SDR 41)
50 to 1000 mmPN - 4.0(SDR 26)
32 to 450 mm & 800 to 1000 mm
PN - 6.0(SDR 17)
32 to 180 mmPN - 8.0
(SDR 13.6)
20 to 450 mmPN - 10
(SDR 11)
20 to 180 mmPN 12.5(SDR 9)
20 to 450 mmPN 16
(SDR 7.4)
50 to 1000 mmPN - 6.0(SDR 21)
40 to 315 mmPN - 8.0(SDR 17)
32 to 500 mm & 800 mmPN - 10
(SDR 13.6)
20 to 450 mmPN 16
(SDR 9)
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
12/07/2024
PE-80
PE-100
Survey NO. 214/1, 214/2, Virpura Bus Stop, P.O.Iyava, Ta. Sanand, Ahmedabad - 382 170
[email protected], [email protected],
M/s. Parixit Irrigation Limited, Ahmedabad42
PE- 80
PE 100
Plot No. G-925, Kishan Gate, GIDC (lodhika), Kalawad Road,
Dist. [email protected]
M/s. Krishna Plastics, Rajkot
41 12/07/2024
Size (mm) Class1 2 3 5 6 7 8
75 to 500 mm SN : 4 & 8
600 to 1000 mm SN: 2, 4, 6 &
8
2M/s. Prince Pipes &
Fittings Ltd., Haridwar (Uttarakhand)
Khasra No. 1548/49- 4 & 5, Salempur. Mehdood, 2, Bahadrabad, Haridwar-
249 402, Uttarakhand
75 to 500 mm(Except 225 mm)
SN : 4 & 8 11-2-20222
75 to 500 mmSN : 4, 8 &
16
600 to 800 mm SN: 2 to 16
4M/s. The Supreme Industries Ltd., Jalgaon
Unit No. III, Gat No. 47, 47/2, 48 to 50, 55 to 66, 70,72 & 73, Jalgaon-
Aurangabad State Highway, At. Post Gadegaon, Tal. Jamner, Jalgaon-
100 to 600 mm SN: 4 & 8 30-6-2021
600 mm, 800 mm & 1000 mm
SN : 2
100 to 1000 mm(Except 125 & 225
mm) SN: 4 & 8
6M/S. AA Vasani Poly Pipe LLP , Talod
Plot No. 299 & 300, GIDC, Talod, Sabarkantha
100 to 500 mm (Except 125 & 225
mm)SN: 4 & 8 25-4-2024
7M/S. NOBLE POLYTEC, Silvassa
301/1,Plot No.7, M Ind.Estate Tipco Road,
Village:- Masat, Silvassa-396230 [email protected]
75 to 600 mm SN: 4 & 8 25-4-2024
8M/s. Jain Irrigation Systems Ltd., Jalgaon
Jain plastic Park, NH No. 6, Bambhori,
Jalgaon,- 425001 (Maharashtra) [email protected]
75 to 500 mm SN: 4 & 8 12/07/2024
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
1M/s. Alom Poly
Extrusions Ltd., Kolkata
Banganagar, Falta, 24 Parganas (South), West Bengal
[email protected]@alom.in
30-6-2021
3M/s. Rex Polyextrusion
Pvt. Ltd, Sangli
C.S No. 190,191,192,193/1,193/2,195/2,196/2,
196/3, Tasgaon-Miraj Road, Kanadwadi, Sangli-416306
30-6-2021
5M/s. Kiran Infra Tech ,
Jaipur
F-445(f) & F-441(e), Road no.12, VKI Area,
25-4-2024
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of DWC (HDPE) Pipes (IS-16098 Part -2) with ISI mark
as per Vendor Selection Report submitted by Different TPI (As on dt. 13-7-2021)Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Remarks
Size (mm) Class1 2 3 4 5 6 7
63 to 110 mm Class II- 4.0 kg/cm263 to 250 mm Class III- 6.0 kg/cm263 to 250 mm Class IV- 8.0 kg/cm2
63 to 250 mm Class V- 10.0 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
40 to 315 mm Class III- 6.0 kg/cm2
63 to 315 mm Class IV- 8.0 kg/cm2
32 to 315 mm Class V- 10.0 kg/cm2
90 to 315 mm (Except 125
mm)Class I- 2.5 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm240 to 315 mm Class III- 6.0 kg/cm225 to 315 mm
(Except 125 mm)
Class IV- 8.0 kg/cm2
20 to 315 mm (Except 125
mm)Class V- 10.0 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
40 to 315 mm Class III- 6.0 kg/cm2
25 to 315 mm Class IV- 8.0 kg/cm2
20 to 315 mm Class V- 10.0 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
90 to 315 mm Class I- 2.5 kg/cm2
125 to 315 mm Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
125 to 180 mm Class IV- 8.0 kg/cm2
30-6-20216
M/s. Borana Industries, Jodhpur
E-39, M.I.A. Basni 2nd Phase, Jodhpur, Rajasthan
30-6-2021M/s. Miraj Pipes & Fittings Pvt. Ltd., Udaipur
Opp. Gangotri, Badi Thur Road, Feniyon ka Guda, Udaipur,
5
2M/s. Kisan Moulding Ltd.,
Silavasa
108/1/6, Surangi Road, Opp. Khadoli Power House sub
station, Khadoli, [email protected]
[email protected]@kisangroup.com
30-6-2021. -
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Ringfit UPVC Pipes (IS-4985) with ISI mark as per Vendor
Selection Report submitted by Different TPI (As on dt. 13-7-2021)Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Remarks
1M/s. Super Industrial
Corp., PatialaC-67, Focal Point, Patiala-147004
3M/s. Kothari Agritech
Pvt. Ltd., Solapur
Plot no. 185 to 193, Chandramauli industrial co-op
estate, Mohol, Solapur-413 213, Maharastra
[email protected]@kotharipipes.co.in
30-6-2021-
4M/s. Kisan Irrigation &
Infrastructure ltd., Mumbai
Unit -2 , Plot No. 91-110, Sector -3, Pithampur, Dist- Dhar (MP)-
30-6-2021 -
Size (mm) Class1 2 3 4 5 6 7
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Remarks
63 to 315 mm Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
63 to 280 mm Class V- 10.0 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
40 to 315 mm Class III- 6.0 kg/cm2
63 to 315 mm (Except 125
mm)Class II- 4.0 kg/cm2
63 to 315 mm (Except 125
mm)Class III- 6.0 kg/cm2
63 to 315 mm (Except 125
mm)Class IV- 8.0 kg/cm2
63 to 315 mm (Except 125
mm)Class V- 10.0 kg/cm2
63 to 315 mm (Except 125
mm)Class VI- 12.5 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
63 to 315 mm Class IV- 8.0 kg/cm2
90 to 315 mm Class V- 10.0 kg/cm2
90 to 250 mm Class II- 4.0 kg/cm2
90 to 200 mm (Excluding 180
mm)Class III- 6.0 kg/cm2
63 to 315 mm (Except 125
mm)Class II- 4.0 kg/cm2
63 to 315 mm (Except 125
mm)Class III- 6.0 kg/cm2
Block No. 792, Near Monik Industries, Sadaspur road, Vill. Moti Bhoyan, Tal. Kalol, Dist.
[email protected]@vishakhairrigation.com
M/s. Vishakha Irrigation Pvt. Ltd., Ahmedabad
10 30-6-2021
9M/s. Parvati Agro Plast,
Sangli (Maharashtra)
UNIT-II, Gate NO. 11/1, Bamnoli, Taluka: Miraj, District:- Sangli,
30-6-2021
11M/s. Guru Polyplast,
Palanpur
4/11 & 4/12, GIDC Chandisar, Palanpur, Banaskantha-385510
30-6-2021
12M/s. Active Pipe
Industries, Dhoraji
Nr. Railway crossing, Junagadh Road, [email protected]
11-2-2022
7
30-6-20218
M/s. Skipper Limited, Ahmedabad
Survey No. 823, Village: Rajoda, Ahmedabad-Rajkot Highway, Taluka: Bavla, Ahmedabad-
[email protected]@skipperlimited.com
M/s. Prince Pipes & Fittings Pvt. Ltd., Dadra
& Nagar Haveli
Survey No. 53 & 85, Jayant Desai Marg, Waghdhara Road, Dadra,
Silvassa, D & N.H. - 396 [email protected]@[email protected]
30-6-2021
Size (mm) Class1 2 3 4 5 6 7
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Remarks
125 to 400 mm Class I- 2.5 kg/cm2
63 to 400 mm Class II- 4.0 kg/cm2
40 to 400 mm Class III- 6.0 kg/cm2
25 to 400 mm Class IV- 8.0 kg/cm2
20 to 400 mm Class V- 10.0 kg/cm2
20 to 400 mm Class VI- 12.5 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
63 to 315 mm Class V- 10.0 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
63 to 400 mm Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
63 to 315 mm Class IV- 8.0 kg/cm2
63 to 315 mm Class V- 10.0 kg/cm2
63 to 400 mm Class II- 4.0 kg/cm2
63 to 400 mm Class III- 6.0 kg/cm2
125 to 400 mm Class IV- 8.0 kg/cm2
63 to 400 mm Class V- 10.0 kg/cm2
20 to 400 mm Class VI- 12.5 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
63 to 355 mm Class II- 4.0 kg/cm263 to 355 mm Class III- 6.0 kg/cm263 to 315 mm Class IV- 8.0 kg/cm263 to 315 mm Class V- 10.0 kg/cm263 to 315 mm Class VI- 12.5 kg/cm2
16M/s. Polysil Pipes,
Silvassa
Survey no. 103/1/2 & Survey No. 101, Plot No. 18, Rakholi
Industrial Estate, Village:- Rakholi, Silvassa-396230 [email protected]
[email protected]@tufropes.com
[email protected][email protected]
9-2-2024
15M/s. Natraj Polyplast Pvt.
Ltd. Rajkot
Survey No. 156/157, Ribda Lodhika Road,
Near Makhawad Chokdi, Makhavad, Rajkot-360035
[email protected] [email protected]
9-2-2024
25-4-2024
25-4-2024
S.No. 182P to 185P, Sanand-Bavla Road, Nani devti, Sanand, [email protected]
M/s. I.M.F. Polymer LLP, Sanand
18
25-4-2024
Unit-3, Survey No. 47/1-73, A/P-Gadegaom, Tal:- Jamner,
Dist-Jalgaon, Maharashtra [email protected]
17M/s. Duke Pipes Pvt. Ltd.,
Palanpur
Survey No:- 365/1, At & post: Chadotar, Gadh Road, Ta- Palanpur, Dist-Banaskantha,
Gujarat (India)-385001 [email protected] [email protected]
M/s. Godavari Pipes Pvt. Ltd., Rajkot
Survey No. 137/1, Plot no.8 & 9, Veraval Padvala Main Road, Ta.;-
Kotda Sangani, Dist.:- Rajkot- 360024
02/11/202214
13M/s. Vasani Polymer Pvt. Ltd., Talod (Sabarkantha)
Survey no. 488/P & 519/P, GIDC Talod, Post box no. 31, Sabarkantha-383215
02/11/2022
M/s. The Supreme Industries Ltd., Jalgaon
19
Size (mm) Class1 2 3 4 5 6 7
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Remarks
63 to 400 mm(Except 125
mm)Class II- 4.0 kg/cm2
40 to 400 mm(Except 125
mm)Class III- 6.0 kg/cm2
63 to 355 mm Class II- 4.0 kg/cm2
40 to 315 mm Class III- 6.0 kg/cm2
20 to 315 mm Class V- 10.0 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
90 to 315 mm Class I- 2.5 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
40 to 315 mm Class III- 6.0 kg/cm2
90 to 400 mm Class I- 2.5 kg/cm2
63 to 400 mm Class II- 4.0 kg/cm2
40 to 400 mm Class III- 6.0 kg/cm2
25 to 400 mm Class IV- 8.0 kg/cm2
20 to 400 mm Class V- 10.0 kg/cm2
90 to 400 mm Class I- 2.5 kg/cm263 to 400 mm Class II- 4.0 kg/cm240 to 400 mm Class III- 6.0 kg/cm225 to 315 mm Class IV- 8.0 kg/cm220 to 315 mm Class V- 10.0 kg/cm2
20 to 250 mm Class VI- 12.5 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
40 to 315 mm Class III- 6.0 kg/cm2
63 to 400 mm Class II- 4.0 kg/cm2
63 to 400 mm Class III- 6.0 kg/cm2
63 to 315 mm Class IV- 8.0 kg/cm2
63 to 315 mm Class V- 10.0 kg/cm2
63 to 315 mm Class VI- 12.5 kg/cm2
25-4-202420M/S. Ramdev PVC
Products Pvt. Ltd., Surat
Block No. 736/737, Tarsadi Gam Road, Taluka- Mangrol, Dist.-Surat , At:- Kosamba-394120
25-4-2024
219, Phase1, GIDC, Nr. Nagalpur Collage,
M/S. Vimco Pipe, Mehsana
21
25-4-202422M/S. Kankai Pipes &
Fittings Pvt.Ltd., Rajkot
Survey No. 97, Palki 4, Padadhari Morbi road, Village-
ukarda, Ta-Rajkot [email protected]
25-4-2024
R.S. No. 13/2 p1, Plot No. 4, NH 27, Opp.Sadak Pipaliya Gate,
Village: Sadak Pipaliya, Ta: Gondal,Dist. Rajkot- 360 311
M/S. Balson Polyplast PVT.LTD.,
23
25-4-2024
Survey no.-589, 590/2, Harsol-Ahmedabad Road,
At & PO- Harsol, Talod, Sabarkantha
M/s. Vinayak Polypipes Pvt. Ltd., Talod
24
25-4-2024
Survey No. 108-p, Near Toll Plaza, Rajkot- Gondal NH-27 At. Bhunava, Taluka: Gondal Dist.
Rajkot. [email protected]
M/S. Kelvin Plastic private Limited, Rajkot
25
25-4-2024
Unit 2- Survey No. 51, Plot No. 1 & 2, Khirasara to
Sarapdad Road, Opp. Nilkanth paper Mill, Ta- Paddhari, Dist. Rajkot, Nani Amreli-360110
M/s. Dolphin Polyplast Pvt. Ltd.,
26
25-4-2024
Survey No. 149/1, 150 & 1776, Dholka-Kheda Road, Opp. GIDC
Estate, Dholka- 382 225, Dist.Ahmedabad, Gujarat
[email protected] [email protected]
m
M/S,. Astral Poly Technik Ltd., Ahmdabad
27
Size (mm) Class1 2 3 4 5 6 7
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Remarks
90 to 315 mm Class I- 2.5 kg/cm2
63 to 400 mm Class II- 4.0 kg/cm2
40 to 315 mm Class III- 6.0 kg/cm2
20 to 315 mm Class V- 10.0 kg/cm2
63 to 250 mm Class II- 4.0 kg/cm2
63 to 250 mm Class III- 6.0 kg/cm2
63 to 200 mm Class V- 10.0 kg/cm2
90 to 315 mm(Except 125
mm)Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm290 to 250 mm
(Except 125 mm)
Class V- 10.0 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm240 to 315 mm Class III- 6.0 kg/cm2
20 to 315 mm Class V- 10.0 kg/cm2
63 to 315 mm(Except 125
mm)Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
63 to 400 mm Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
35M/s. Jain Irrigation
Systems Ltd., Jalgaon
Jain Plastics Park, N.H. no. 6, P.O. Box 72, Bambhori, Jalgaon-
425001, [email protected]
63 to 630 mm Class II , III and IV
( 4, 6 and 8 kg/cm2)12/07/2024
63 to 315 mm Class II- 4.0 kg/cm240 to 315 mm Class III- 6.0 kg/cm225 to 315 mm Class IV- 8.0 kg/cm263 to 160 mm Class V- 10.0 kg/cm2
25-4-2024
Block no.- 187, Plot No 1 to 21, Karanj, Kim- Mandvi highway,
Mandvi, [email protected]
M/S. ARON PIPES PVT.LTD., Surat
28
Plot No. 314, Zak Industrial Area, Vahelal Road, Vill-Zak, Post
Pardhol, Tal-Dahegam, Dist-Gandhiangar [email protected]
M/S. Swastik Krushi Polypipes Pvt.Ltd.,
Gandhinagar29 25-4-2024
25-4-202430M/S. Mayfair Polymers Pvt.Ltd., Himmatnagar
Mayfair Compund, N.H. No-8, Shamlaji Road, Nr. Sahkari jin, Himatnagar-383001, Gujarat
25-4-2024
39,44A, Industrial Area,Ratlam-457001
M/s. Kataria Plastics Pvt. Ltd., Ratlam
31
Block No. 433, Tajpur Oran Road, At. Village: Prantij, At:- Taluka:Prantij, Dist:- Sabarkantha-383205
M/S. Stuti Pipes Pvt.Ltd. , Talod
32 25-4-2024
25-4-2024
Survey No. 30/1, Plot no. G-7B, B/H Ganga Forging , National
Highway Shapar (Veraval) Dist: Rajkot
M/S. OM IRRITECH LTD., Rajkot
33
25-4-202434M/s. Dutron Polymers
Limited., Kheda
Block No. 642, NH 8, At Hariyala, Kheda
Plot no. 462-465 , Sector-3, Industrial Area, Pithampur, Dhar,
Madhya Pradesh [email protected]
M/s. Signet Industries Ltd., Dhar (MP)
36 12/07/2024
Size (mm) Class1 2 3 4 5 6 7
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Remarks
125 to 315 mm Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
125 to 315 mm Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
63 to 400 mm Class II- 4.0 kg/cm263 to 315 mm Class III- 6.0 kg/cm263 to 315 mm Class IV- 8.0 kg/cm2
63 to 315 mm Class V- 10.0 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
40 to 315 mm Class III- 6.0 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
40 to 315 mm Class III- 6.0 kg/cm2
63 to 400 mm Class II- 4.0 kg/cm2
63 to 400 mm Class III- 6.0 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm263 to 315 mm Class III- 6.0 kg/cm263 to 315 mm Class IV- 8.0 kg/cm263 to 315 mm Class V- 10.0 kg/cm2
63 to 200 mm Class II- 4.0 kg/cm2
63 to 200 mm Class III- 6.0 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
M/s. Kamdhenu Pipe, Rajkot
NH 27, Near Murakhda's Patiya, At- Murakhda, Taluka:- Upleta,
12/07/202438
M/s. Sagar Polytechnik Ltd., Rajkot
Plot no. 109/110/111, Old highway, Bamnbore GIDC,
Bamnbore, Chotila, Surendranagar
[email protected]@sagarpolymers.com
12/07/202439
Plot (Khasra ) No. 2928 (JHA) & 2938, Dhoom Manikpur, Dadri, Dist. Guatam Budh Nagar, Uttar
M/s. Apollo Pipes Ltd., Uttar Pradesh
37 12/07/2024
M/s. Elegant Polymers, Surendranagar
At:- Navagam (Bamanbore) Survey No:- 96, Nr.- High School
Tal:- Chotila Dist:- Surendranagar- 363520
12/07/202440
M/s. Captain Pipes Ltd., Rajkot
Survey no.257, Plot No.23 to 28, NH-27, Shapar (Veraval), Rajkot
[email protected]/07/202441
12/07/2024
Survey No. 114, Bavla-Sanand Road, Village:- Lodariyal, Bavla,
Ahmedabad-382110 [email protected]
M/s. Milan Pipe Industries, Ahmedabad
42
98, Bahadarpur Road, Burhanpur, Madhya Pradesh-450331
M/s. Texmo Pipes & Products Ltd., Burhanpur
(MP)12/07/202443
Plot No. G-925, Kishan Gate, GIDC (lodhika), Kalawad Road,
At, Methoda Dist. Rajkot-360021 [email protected]
M/s. Sumo Polyplast Pvt. Ltd., Rajkot
44 12/07/2024
45M/s. Parixit Irrigation
Limited, Sanand
Survey NO. 214/1, 214/2, Virpura Bus Stop, P.O.Iyava, Ta. Sanand,
Ahmedabad - 382 170 [email protected],
[email protected] [email protected]
12/07/2024
Size (mm) Class1 2 3 4 5 6 7
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Remarks
75 to 315 mm Class II- 4.0 kg/cm2
75 to 315 mm Class III- 6.0 kg/cm2
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
M/s. Idol Plasto Pvt. Ltd., Rajkot
Rajkot Ahmedabad N.H. No. 8-B, Wankaner Chowkdi, Survey no.552, Opp. Kuvadava High
School, Kuvadava, Rajkot-360 023
12/07/202446
Size (mm) (NM) Class
1 2 3 4 5 6 740 to 200 mm RMS
40 to 200 mm CM
150 to 200 mm CS
200 to 400 mm CD
40 to 250 mm CM
150 to 250 mm CS
100, 115, 125, 150, 175, 200, 250 mm
CM
150, 175, 200, 250 mm
CS
150 mm to 250 mm CS
40 mm to 300 mm CM
100 mm to 300 mm CD
40 mm to 200 mm RMS
150 mm to 400 mm CS
40 mm to 400 mm CM
150 to 350 mm CS
100 to 350 mm CM
40 to 250 mm CM
150 to 250 mm CS
40 to 250 mm RS
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR
List of Approved Vendors of GWSSB for supply of uPVC Screen & Casing Pipes (IS-12818) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on dt. 13-7-2021)
Sr. No.
Name of Agency Adress/E-mail Address
Approved Size & Class Approval Valid up to
Date Remarks
3M/s. Vinayak Polypipes Pvt. Ltd., Himmatnagar
Survey no.-589, 590/2, Harsol-Ahmedabad Road, At & PO- Harsol,
Talod, [email protected]
30-6-2021-
4M/s. Skipper Limited,
Kolkata
Ububeria Unit, N.H. No.-6, Village:- Madhabpur, PO:- Mahishrekha, PS:-
Uluberia, Howrah-711 303ujjal.bhattacharyya@skipperlimite
30-6-2021-
30-6-2021Survey no.257, Plot No.23 to 28, NH-
27, Shapar (Veraval), [email protected]
M/s. Captain Pipes Ltd., Rajkot
5 -
6M/s. Sagar Polytechnik
Ltd., Rajkot
Plot no. 109/110/111, Old highway, Bamnbore GIDC, Bamnbore, Chotila,
30-6-2021
1M/s. Super Industrial
Corp., PatialaC-67, Focal Point, Patiala-147004
2M/s. Polysil Pipes,
Silvassa
Survey No. 103/1/2, Rakholi Industrial Estate, Village-Rakholi,
Silvassa, D & [email protected]
[email protected][email protected]
30-6-2021
M/s. Prince Pipes & Fittings Pvt. Ltd., Dadra
& Nagar Haveli
Survey No. 53 & 85, Jayant Desai Marg, Waghdhara Road, Dadra,
Silvassa, D & N.H. - 396 [email protected]@princepipes.com
30-6-20217
Size (mm) (NM) Class
1 2 3 4 5 6 7
Sr. No.
Name of Agency Adress/E-mail Address
Approved Size & Class Approval Valid up to
Date Remarks
150 to 200 mm CS
100 to 250 mm CM
100 to 250 mm RS
150 to 250 mm CS
40 to 250 mm CM
150 to 200 mm CS
100 to 200 mm CM
150, 175, 200 & 250 mm
CS
100, 125, 150, 175, 200 & 250 mm
CM
150 to 200 mm CS
100 to 200 mm (Except 115 mm)
CM
150 to 400 mm CS35 to 400 mm CM
100 to 400 mm CD200 to 400 mm PMS200 to 400 mm PDS35 to 400 mm RMS
100 to 400 mm RDS
14 150 to 315 mm CS
15 100 to 315 mm CM
150 to 250 mm CS
100 to 250 mm CM
9M/s. Kisan Irrigation &
Infrastructure Ltd., Dhar (MP)
Factory:- Unit II, Plot No. 91-110, Sector no. 3, Pithampur, Dhar,
Madhya [email protected]
[email protected]@kisanirrigation.com
30-6-2021
M/s. Texmo Pipes & Products Ltd., Burhanpur
(MP)
98, Bahadarpur Road, Burhanpur, Madhya Pradesh-450331
30-6-20218
Survey No:- 365/1, At & post: Chadotar, Gadh Road, Ta- Palanpur, Dist-Banaskantha, Gujarat
(India)-385001 [email protected] [email protected]
M/s. Duke Pipes Pvt. Ltd., Palanpur
13 25-4-2024
M/s. I.M.F. Polymer LLP, Sanand
S.No. 182P to 185P, Sanand-Bavla Road, Nani devti, Sanand, [email protected]
25-4-2024
10M/s. C.R.I. Pumps Pvt.
Ltd., Kalol
Block NO. 56, B/H Jhonson Screen, Khatraj-Kalol Road, Khatraj, Kalol,
11-2-2022
30-6-202112
M/s. Signet Industries Ltd., Dhar (MP)
Plot no. 462-465 , Sector-3, Industrial Area, Pithampur, Dhar,
Madhya [email protected]
11M/s. Vasani Polymer Pvt. Ltd., Talod (Sabarkantha)
Survey no. 488/P & 519/P, GIDC Talod, Post box no. 31, Sabarkantha-
11-2-2022
M/S. ARON PIPES PVT.LTD., Surat
Block no.- 187, Plot No 1 to 21, Karanj, Kim- Mandvi highway,
Mandvi, [email protected]
25-4-202416
Size (mm) (NM) Class
1 2 3 4 5 6 7
Sr. No.
Name of Agency Adress/E-mail Address
Approved Size & Class Approval Valid up to
Date Remarks
150 to 250 mm CS
125 to 200 mm CM
150 to 250 mm CS
35 to 250 mm CM
35 to 400 mm CM
150 to 400 mm CS35 to 400 mm RMS
100 to 400 mm RDS40 to 300 mm
(Except 115 mm)CM
150 to 300 mm CS200 to 300 mm CD50 to 250 mm
(Except 115 mm)RSP
100 to 300 mm CM150 to 300 mm CS
100 to 300 mm CD
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
M/s. Dutron Polymers Limited., Kheda
Block No. 642, NH 8, At Hariyala, Kheda
M/S. Stuti Pipes Pvt.Ltd. , Talod
Block No. 433, Tajpur Oran Road, At. Village: Prantij, At:- Taluka:Prantij,
Dist:- Sabarkantha-383205 [email protected]
25-4-202417
12/07/2024
Survey No. 114, Bavla-Sanand Road, Village:- Lodariyal, Bavla,
Ahmedabad-382110 [email protected]
M/s. Milan Pipe Industries, Ahmedabad
21
12/07/2024
Jain Plastics Park, N.H. no. 6, P.O. Box 72, Bambhori, Jalgaon-425001,
M/s. Jain Irrigation Systems Ltd., Jalgaon
19
12/07/2024
Plot (Khasra ) No. 2928 (JHA) & 2938, Dhoom Manikpur, Dadri, Dist. Guatam Budh Nagar, Uttar Pradesh
M/s. Apollo Pipes Ltd., Uttar Pradesh
20
1 2 3 4 5 6
1
M/s. Tata Steel BSL Ltd., Raigadh
(Formerly Known as M/s. Bhusan Steel Ltd.,
Raigadh)
Nigan-savroli, Isamba Phata khopoli, Tal;- Khalapur, Dist:- Raigad, Maharastra-410203
ERW Pipes of range:- Dia- 3" to 8" (80 NB to 200 NB), 8" to 24" maximum thickness up to 12.7 mm.
30-6-2021
Name Changed
vide letter No.146 dtd.
9-3-2020
2M/s. Ratnamani Metals & Tubes Ltd., Chhatral
Plot no. 3306 to 3309, GIDC Estate, Chhatral Phase IV,
Ahmedabad-Mehasana Highway, Chhatral, kadi, Mehasana-382729
OD:- 355.6 mm to 1219 mm (14" to 48" N.B.)Wall thickness:- 5 mm to 28 mm
30-6-2021
3M/s. Asian Mills Pvt. Ltd.,
Ahmedabad
Asian Mills PVt. Ltd., Plot NO. 1, Phase-1, GIDC Chhatral, Kalol,
Mehsana [email protected]
(1) IS: 1239 (Part-1)2004:- 15 mm to 80 mm Nominal Bore, Light, Medium, Heavy Class and 100 mm to 150 mm Nominal Bore Medium & Heavy Class, 100 mm NB Light Class Black plain end and screwed & socketed pipes.(2) IS : 3589-2001:- 168.3 mm OD to 508 mm OD (Except 244.5 mm OD) Blakc plain end and Beveled end Pipes Gr.Fe:330 & Fe:410(3) IS:4270-2001: 100 mm NB to 400 mm NB (Except 225 mm NB) Black Beveled End pipes Gr. Fe:410
30-6-2021
4M/s. Essar Steel India
Ltd., Hazira
Essar Steel India Ltd., (pipe mill Division), 27th Kms Surat Hazira
road, Surat, [email protected]
406 mm to 2540 mm in thickness 6 to 25.4 mm WT. 30-6-2021 -
Approved Size & Thickness
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of MILD STEEL (M.S.) Pipes (IS 3589) with ISI mark
as per Vendor Selection Report submitted by Different TPI (As on dt. 13-7-2021)
Sr. No.
Name of Agency Adress/E-mail AddressApproval
Valid up to Date
Remarks
1 2 3 4 5 6
Approved Size & Thickness Sr. No.
Name of Agency Adress/E-mail AddressApproval
Valid up to Date
Remarks
5
M/s. Surya Roshni Limited, Kutch
(Formerly Known as M/s. Surya Global steel
tubes Ltd.)
Survey No.188, Anjar-Mundra highway, Village:-Bhuvad, Kutch-
[email protected]@gmail.com
(A) MS ERW pipe:- 15 to 400 mm NB, up to 12.70 mm WT, Grade Fe 330 & 410 (B) MS Spiral Welded pipe:- From 457.2 mm to 2540 mm OD, up to 25 mm WT, Grade Fe 330 & 410
30-6-2021
Name Changed
vide letter No.218 dtd.
4-4-2018
6M/s. Riddhi Steel &
Tubes (P) Ltd., Ahmedabad
83-84, Village- Piplaj, Pirana Road, Ahmedabad-382 [email protected]
(1) M.S. ERW Steel Pipe conforms IS :1239: Part-1:2004- (Black & Galvanised) With ISI Mark - Size :- 15 to 150 mm NB(2) M.S. ERW Steel Pipe conforms IS :3589:2001- (Black ) With ISI Mark - Size :- 150 to 300 mm NB
30-6-2021 -
7M/s. Welspun Corp Ltd, Dahej
Welspun Corp Ltd., Village:- Jolva & Vadadla, Near Dahej, Taluka:-
Vagra, Bharuch- [email protected]
(i) SAW pipes:- 406.4 mm to 1829 mm OD ( with ISI Mark) Thickness:- 4 mm to 14.20 mm(ii) Internal & External Coating:- Food Grade Epoxy, CML, 3LPE, FBE & DFBE coating
30-6-2021
8M/s. Welspun Corp Ltd, Anjar
Welspun Corp Ltd., Anjar Bhachau Highway, Village:- Versamedi, Taluka:- Anjar, Kutch- 370110
[email protected][email protected]
(i) ERW & HSW Pipes:- 168.1 mm to 3250 mm dia OD ( with ISI mark as per IS 3589/1239 & 5504) above that up to 3556 mm OD ( without ISI mark) Thickness 4 mm to 25 mm.(ii) Internal & External Coating:- Food Grade Epoxy, CML, 3 LPE & DFBE coating, thickness range: 0.1 mm to 50 mm
30-6-2021
9M/s. Maharashtra Seamless Ltd., Sukeli, Maharastra
Pipe Nagar, Village:- Sukeli, NH 17, BKG Road, Dist. Raigadh,
Maharastra- [email protected]
(i) MS pipe with ISI mark: - ( IS 3589): 168.3 to 508 mm dia(ii) MS pipe with ISI mark ( IS 4270) :- 150 to 450 mm(iii) 3 LPE/LPP Coating for pipe size: 168.3 mm to 508 mm, coating thickness 0.1 mm to 5.0 mm(iv) Internal Coating:- Food Grade Epoxy Coating
30-6-2021
1 2 3 4 5 6
Approved Size & Thickness Sr. No.
Name of Agency Adress/E-mail AddressApproval
Valid up to Date
Remarks
10M/s. PSL Limited, Anjar, Kutch
Village: Varsana, Survey No. 39,40,42, Bhachau- Bhimasha
road/ Nr. Gandhidham Varsana, Taluka_ Anjar, Kutch- 370240
[email protected]@pslltd.co.in
MS pipe with ISI mark:- ( IS 3589 Grade 330 & 410 & IS
5504:1997):406.4 mm to 2540 mm OD dia
with thickness from 5 mm to 20 mm.
30-6-2021
11M/s. Deep Seals (India) Limited, Kutch
S.NO.583, Lakadiya, NH -27, Opp. Meena Agency Ltd.,
Samakhiyali,
Kutch-370150 [email protected]
m
MS pipe with ISI mark:- (i) IS 3589;- Pipe size 168.3 mm OD to 2540 mm (ii) IS 5504: Pipe Size 457 mm to 3035 mm
9-2-2024
12M/s. Hitech Saw Pipes Ltd. Sanand
Survey No. 229, Near Raviraj Foils At. Kalana,
Sanand, Ahmedabad 382170
E-mail:- [email protected]
MS pipe with ISI mark:- ( IS 3589 ) Pipe size 406 mm OD to 1626 mm
9-2-2024
13M/s. Welspun Corp Limited, Madhya Pradesh
Survey No. 228, 229, Industrial Area Jamunia,
Gram Post- Jamunia, Taluka-Raisen-464651,
Madhya Pradesh [email protected]
MS pipe with ISI mark:- 1) IS 3589 : Pipe Size 168.3 mm to 2540 mm 2) IS 5504: 457 mm to 3250 mm
9-2-2024
14M/s. MAN Industries (India) Ltd. Kutch
Village:- Khedol, Anjar Mundra Highway,
Anjar, Kutch [email protected]
MS pipe with ISI mark:- 1) IS 3589 : Pipe Size 585 mm to 2235 mm 2) IS 5504: 457 mm to 3250 mm
9-2-2024
15M/s. Surindra Engineering Company Limited, Gandhinagar
Block No. 1517, Village Moti Bhoyan, Kalol-Khatraj Road, Kalol,
Dist-Gandhinagar- 383721 [email protected]
M.S. Pipe With ISI mark:-IS 3589: Pipe size 406 mm to 2540 mm
25-4-2024
16M/s. Jindal Saw Ltd., Kutch
Integrated Pipe Unit (PIU), Vill: Samaghoda, Paragpar-Mandvi
Road, Tal: Mundra, Dist: Kutch-370415
M.S. Pipe With ISI mark:-IS 3589: Pipe size 457 mm to 2540 mm IS 5504: Pipe size 457 mm to 3250 mm
25-4-2024
1 2 3 4 5 6
Approved Size & Thickness Sr. No.
Name of Agency Adress/E-mail AddressApproval
Valid up to Date
Remarks
17M/s. Ratnamani Metals & Tubes Ltd.,
Survey No. 474, Anjar-Bhachau Road, Village:- Bhimasar, Anjar,
Kutch [email protected]
M.S. Pipe With ISI mark:-IS 3589: Pipe size 168.3 mm to 2540 mm IS 5504: Pipe size 457 mm to 3035 mm
25-4-2024
18M/s. Jindal Pipes Ltd., Ghaziabad
22nd Mile, Delhi- Hapur Road, P.O. Jindal Nagar, Ghaziabad,
Uttar Pradesh [email protected]
M.S. Pipe With ISI mark:-IS 3589: Pipe size 168.3 mm to 355.6 mm IS 1239: Pipe size 15 mm to 150 mm IS 4270: Pipe size 100 mm to 350 mm
25-4-2024
19M/s. Welspun Corp Limited, Bharuch
Village jolva & Vadadla, Near Dahej, Taluka Vagra,
Dis Bharuch, Gujarat 392 130 [email protected]
M.S. Pipe With ISI mark:-IS 3589: Pipe size 406.4 mm to 1829 mm
12/07/2024
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
Size (mm) Class
1 2 3 4 5 6 7
80 to 1000 mmK-7 , K-8, K-10 &
K-12
80 to 1100 mm K-9
2
M/s. Tata Metaliks Limited, Medinapur
(WB)(Formerly known as Tata Metaliks DI Pipes Ltd.,)
P.O.- Samraipur, Kharagpur, Dist.: Medinapur(West) -721301, West
80 mm to 800 mm (Except 125
& 750 mm) K-7 & K-9
30-6-2021
Name changed vide letter no. 217 dtd.4-4-2018
3M/s. Srikalahsthi Pipes Ltd., Andhra pradesh
Rachagunneri-517641, Srikalahasthi Mandal, Chittor
District, Andhra Pradesh
100 to 1100 mm K-7 , K-8 &
K-925-4-2024
4M/S. ESL STEEL LIMITED.,
Jharkhand
Siyaljori, P.O. Jogidih,O.P. Bangaria,
P.s. Chandankyari, Bokaro,Pin-828303
Jharkhand, India [email protected]
Up to 1200 mm K-7 & K-9 25-4-2024
5M/s. Jindal Saw Ltd.,
Kutch
Integrated Pipe Unit (PIU), Vill: Samaghoda, Paragpar-
Mandvi Road, Tal: Mundra, Dist: Kutch-370415
Up to 1200 mm K-7 & K-9 25-4-2024
6M/s. Electrotherm (India)
Limited, Kutch
Survey No. 325, Near Toll Tax Booth, National Highway No. 8A,
310 KM Stone, Village: Samkhiyali, Ta:- Bhachau, Kutch-
370140 [email protected]
80 to 1200 mm K-7 & K-9 25-4-2024
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR
List of Approved Vendors of GWSSB for supply of DI Pipes (IS 8329) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on dt. 13-7-2021)
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
Remarks
1M/s. Electrosteel Castings
Ltd., Kolakatta
30, B.T. Road, Khardah, P.O. Sukchar, Dist. 24 Parganas
(North)[email protected]
30-6-2021-
Size (mm) Class
1 2 3 4 5 6 7
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
Remarks
7M/S. RASHMI METALIKS
LIMITED, Kolkata
Vill: Gokulpur, P.O. Shyamraipur, P.S. Kharagpur, Paschim
Medinipur Pin-721 304, W.B. India
[email protected]@rashmigroup.c
m
80 to 1000 mm K-7 & K-9 25-4-2024
8M/s, Jai Balaji Industries
Ltd., Kolkata
Village -Banskopa, P.O.-Rajbandh, P.S.- Kanksa, Dist. Burdwan-
713212, West Bengal
100 to 1200 mm K-7 & K-9 12/07/2024
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
Size (mm) Class
1 2 3 4 5 6 7 8
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
50 to 900 mm PN 1.0
50 to 600 mm PN 1.6
3M/s. Bikaner
Engineering Works , Jaipur
F-445, Road No. 12, V.K.I. Area, Jaipur-302013
[email protected] to 300 mm 1.0 & 1.6
With ISI Mark
30-6-2021-
4M/s. Perfect valves Pvt. Ltd., Jalandhar
Waryana Industrial Complex, Sangal Sohal Road, Adjoining Leather Complex, Jalandhar-
50 to 300 mmPN 1.0 &
PN 1.6 With ISI
Mark30-6-2021
5M/s. S & M Industrial Valves Ltd., Kolkata
Sadananda Industrial Estate, Balitikuri, Bakultala,
Howrah-711 [email protected]
Up to 1000 mmup to PN
1.6Without ISI
Mark30-6-2021 -
6M/s. Sondhi
Industries,Jalandhar
C-9 & C-11, Canal Road, Insustrial Area, Jalandhar-
144004, [email protected]
50 to 600 mmup to PN
1.6With ISI
Mark30-6-2021 -
50 to 300 mmUp to PN
1.6With ISI mark
350 to 600 mmUp to PN
1.6Without ISI
Mark
50 to 1200 mmPN 1.0 &
PN 1.6 With ISI mark
1300 to 1600 mmUp to PN
2.0Without ISI
Mark
up to 800 mmUp to PN
1.6Without ISI
MarkResilient Seated
2M/s. Upadhaya Valves
Manufacturers Pvt. Ltd., Kolkatta
P 280 Benaras road, Howrah-711108
[email protected]@upadhayavalves.net
With ISI Mark
30-6-2021
30-6-2021Balitikuri, Bakultala, via
Dasnagar, [email protected]
M/s. H.Sarker & Company, Howrah
1 With ISI mark
-
30-6-2021
Industrial Enclave, V.P.O. Randhawa Masandan,
M/s. Mac International,
Jalandhar7
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR
List of Approved Vendors of GWSSB for supply of C.I. Sluice Valves (IS-14846) as per Vendor Selection Report submitted by Different TPI (As on dt. 13-7-2021)
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
30-6-2021
Vivekanand industrial estate, Balitikuri, Bakultala, Howrah-
711402 [email protected]
[email protected]@gmail.com,
M/s. G.M. Dalui & Sons (Pvt.) Ltd., Howrah
8
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
50 to 1200 mm PN 1.050 to 600 mm PN 1.6
Up to 1400 mmUp to PN
1.6Without ISI
Mark
50 to 600 mmUp to PN
1.6Without ISI
MarkResilient Seated
10M/s. McWane Services Pvt. Ltd., Coimbatore
143/2A, Anna Nagar Road, Neelambur, Coimbatore-
Up to 1000 mmPN 1.0 &
PN 1.6 Without ISI
Mark30-6-2021
DI
50 to 600 mmUp to PN
1.6With ISI mark
700 to 1500 mmUp to PN
1.6Without ISI
Mark
50 to 300 mmPN 1.0 &
PN 1.6 With ISI mark
350 to 600 mmPN 1.0 &
PN 1.6 Without ISI
Mark
50 to 600 mmPN 1.0 &
PN 1.6 With ISI mark
Up to 1000 mmUp to PN
1.6Without ISI
Mark
14M/s. V-Tork Controls,
Coimbatore
SF 652/4A, SIR C.V. Raman Layout, Near Rathinam
Collage, Kurichi, Coimbatore-641021, Tamilnadu
[email protected]@gmail.com
Up to 600 mmUp to PN
1.6Without ISI
Mark11-2-2022
15M/s. Indian valve Pvt. Ltd., Nasik
Plot No. 53, Industrial Estate, Satpur, Nasik- 422007,
50 to 1800 mm Upto PN
1.6Without ISI
Mark30-6-2021 CI/DI
16M/s. CRI pumps Pvt. Ltd., Coimbtore
Rago Industries, S.F.No. 10/150, Masagounden
Chettipalayam, Oraikalpalayam, Kunnathur
pudur (P), Coimbatore- 641107, Tamilnadu
50 to 600 mmPN-1.0 & PN-1.6
With ISI mark 30-6-2021
17M/s. SAP Industries
Ltd., Ahmedabad
10-A, Krishna Industrial estate, Nr. Sukharampura Post Office,
Nagarvel Hanuman Road, Rakhial, Ahmedabad- 380023
Up to 16"PN 1.0 &
PN 1.6 Without ISI
Mark30-6-2021
30-6-2021
G.T. Road, Bye Pass, Maqsoodan, Jalandhar-
M/s. Bir Industries, Jalandhar
12
9
With ISI mark
30-6-2021
30-6-202169A, Balitikuri Industrial Estate, Howrah-711113
M/s. Indian Valve International, Howrah
11
MH-6 Chamrail, Near Kona Express Highway, Howrah-
M/s. Kejriwal Castings Ltd., Howrah
13M/s. Aarko
Manufacturing co., Jalandhar
75, Industrial Estate Extention, Behind Sharp Chucks,
Jalandhar [email protected]@aarko.in
11-2-2022
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
50 to 1200 mm PN 1.0 With ISI mark
50 to 600 mm PN 1.6 With ISI mark
50 to 1200 mmUp toPN
4.0without ISI
Mark
19M/s. VAG Valves (India) Pvt. Ltd.,
Telangana
Plot No. 57 & 56, Phase-III, TSIIC, Pashamylaram,
Patancheru (M), Sangareddy (D), Telangana,
50 to 1500 mm (DI)
PN 1.0 & PN 1.6
Without ISI Mark
9-2-2024
20M/s. Kirloskar Brothers
Ltd., Pune
Kirloskar Brothers Ltd., Valve Business Unit, Gate no.
252/253, Kondhapuri, Taluka-Shirpur, Dist. Pune,
[email protected]@kbl.co.in
-Recommended by VSC
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
1400 to 1800 mmPN 1.0 &
PN 1.6Without ISI
mark
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
up to 1800 mmUp to PN 3.0
Without ISI mark
24M/s. Veeson Valves Pvt. Ltd., Jalandhar
DRP Lane, Bulandpur Road, Jalandhar-144 012, Punjab
[email protected] to 600 mm
PN 1.0 & PN 1.6
With ISI mark 24-4-2024
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
Sluice valves
M/s. Bharat Engineering Works,
Dhrangadhra
Plot No. 66-67, Phase-K, Mayurnagar, B/h. T.V. Station, Dhrangadhra-363310, [email protected]
m
18 9-2-2024
With ISI mark 24-4-2024Howrah Amta Road, Dasnagar,
Howrah – [email protected]
M/S. K P Mondal & Sons, Howrah
21
With ISI mark
22M/s. Jupiter
Engineering Co., Howrah
Kashipur, Dasnagar, Howrah-711105
With ISI mark
24-4-2024
Unit-1:- 129,B/h. Kashiram Textile Mills, Narol Road,
Ahmedabad-382 405 [email protected]
M/S. HAWA ENGINEERS LTD.,
Ahmedabad23
With ISI mark 24-4-2024
C -33, Focal Point Extension, Jalandhar-144004, Punjab
M/s. Sachdeva Metal Works, Jalandhar
25
With ISI mark 24-4-2024
Plot No. 2632, GIDC LODHIKA, VILLAGE METODA, RAJKOT-
360021 [email protected]
M/s. G M ENGINEERING PVT.
LTD., Rajkot26
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
50 to 900 mm PN 1.0
50 to 500 mm PN 1.6
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
30M/s. Kartar Valves Pvt.
Ltd., Jalandhar
Juneja Complex, Village- Variana, Kapurthala
Road, [email protected]
50 to 600 mm PN 1.0 &
PN 1.6With ISI mark 24-4-2024
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
up to 1500 mm PN 1.0Without ISI
mark
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
up to 1500 mm PN 1.0Without ISI
mark
33M/S. Zoloto
Industries., Jalandhar
Zoloto House, 11th Mile Stone, Nakodar Road, Lambra, Jalandhar –
50 to 300 mmPN 1.0 &
PN 1.6With ISI mark 24-4-2024
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
50 to 1200 mmUp to PN
4.0Without ISI
mark
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
1300 to 1800 mmUp to PN
2.5Without ISI
mark
With ISI mark 24-4-202427M/s. Shiva Industries,
Jaipur
Unit:-1- KH No. 518, Near Vaidh ji Ka Chouraha, Niwaroo Road, Jhotwara,
Jaipur- [email protected]
With ISI mark 24-4-2024
Ghosh Para, Balitikuri, Howrah-711113.
M/S. Kalpana Vaves Mfg.Co.(P) Ltd.,
Howrah28
With ISI mark 24-4-202472/A, Manikpirtala,
2nd Bye Lane, [email protected]
M/S. Shree Balaji Industries, Howrah
29
With ISI mark
24-4-2024
Village & Post: Mahiserkha, Tusiberia Road (Near Ideal School), PS: Uluberia, Dist:
Howrah- 711 303 [email protected]
[email protected] [email protected]
M/s. Durga Valves PVT.LTD., Howrah
31
With ISI mark24-4-2024
6/1A British Indian Street, Kolkata- [email protected]
M/S. Calsens Private Limited., Kolkata
32
With ISI mark
24-4-2024
Plot no. 34, opp. Pramukh Packaging, Nr. Pooja
Dhanadal, S'nagar-Rajkot Highway, Shekhpar,
Surendranagarketanengiw@yahoo,in
M/S. KETAN ENGINEERING WORKS
, Surendranagar34
With ISI mark24-4-2024
Plant-2, Survey No. 304, Balda, Pardi-396125, Dist. Valsad, Gujarat
[email protected] [email protected]
M/S. R & D MULTIPES PVT. LTD. (PLANT-2)
35
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
Up to 1500 mm PN 1.0Without ISI
mark
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
With ISI mark
Salap, NH-6, Domjur, Howrah-711409,
West [email protected]
m
M/s. Mahadevi Industries, Howrah
36 12/07/2024
Size (mm) Class
1 2 3 4 5 6 7 8
1M/s. H.Sarker &
Company, Howrah
Balitikuri, Bakultala, via Dasnagar, Howrah-711113
[email protected] to 600 mm
PN 1.0 & 1.6
With ISI Mark30-6-2021
2M/s. Bikaner
Engineering Works, Jaipur
F-445, Road No. 12, V.K.I. Area, Jaipur-302013
[email protected] to 300 mm
PN 1.0 & 1.6
Without ISI mark
30-6-2021As per IS
5312 (part 1 )
3M/s. Perfect valves Pvt. Ltd., Jalandhar
Waryana Industrial Complex, Sangal Sohal Road, Adjoining Leather Complex, Jalandhar-
50 to 300 mmPN 1.0 &
PN 1.6With ISI Mark 30-6-2021 -
4M/s. Fouress
Engineering (I) Ltd., Banglore
Plot-2, Phase-II, Peanga Industrial Area, Banglore-560058
[email protected]@fouressindia.com
450 to 1800 mm
Up to PN 16 (16 bar)
Without ISI Mark
30-6-2021Single Door
& Multi door
5M/s. Flownix valves
Pvt. Ltd., Pune
Gate no.1, Plot No. 24, Atul Industrial Premises, Talawade,
Up to 600 mm up to 24 kg/sqcm
Without ISI Mark
30-6-2021-
up to 1200 mm
up to PN 1.6
Without ISI Mark
Dual plate check valve
up to 500 mmup to PN
1.6Without ISI
MarkSwing Type check valve
150 to 300 mm PN 1.0
50 to 125 mm PN 1.6
350 to 400 mm Up to PN
1.6 Without ISI
Mark
50 to 300 mmUp to PN
1.6With ISI Mark
350 to 450 mmUp to PN
1.6Without ISI
Mark
Up to 600 mm As per IS
5312 (part 1
Up to 1400 mm
As per IS 5312 (part
2)
Swing Check type
C-9 & C-11, Canal Road, Insustrial Area, Jalandhar-144004, Punjab
M/s. Sondhi Industries,Jalandhar
7 30-6-2021
30-6-20216M/s. S & M Industrial Valves Ltd., Kolkata
Sadananda Industrial Estate, Balitikuri, Bakultala,
Howrah-711 [email protected]
With ISI Mark
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of C.I. Non Return (Reflux) Valves (IS:5312) as per Vendor
Selection Report submitted by Different TPI (As on dt. 13-7-2021)
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class
Approval Valid up to Date
RemarksISI Mark
Swing Check 30-6-2021
8
30-6-20219
M/s. Mac International,
Jalandhar
Industrial Enclave, V.P.O. Randhawa Masandan, Jalandhar-
M/s. G.M. Dalui & Sons (Pvt.) Ltd.,
Howrah
Vivekanand industrial estate, Balitikuri, Bakultala, Howrah-
711402 [email protected]
[email protected]@gmail.com,
Up to PN 1.6
Without ISI Mark
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class
Approval Valid up to Date
RemarksISI Mark
50 to 600 mm PN 1.0 &
PN 1.6With ISI Mark Single Door
Up to 1500 mm
UP to PN 1.6
Without ISI mark
Single/ Multi Door
50 to 300 mmPN 1.0 &
PN 1.6With ISI Mark
350 to 500 mmPN 1.0 &
PN 1.6Without ISI
mark
50 to 600 mm UP to PN
1.6With ISI Mark
500 to 1000 mm
UP to PN 1.6
Without ISI mark
13M/s. Bir Industries,
Jalandhar
G.T. Road, Bye Pass, Maqsoodan, Jalandhar-144008
[email protected] to 300 mm
PN 1.0 & PN 1.6
With ISI Mark30-6-2021
Swing Check
50 to 300 mmPN 1.0 &
PN 1.6With ISI Mark
Up to 600 mm Up to PN
1.6Without ISI
mark
15M/s. V-Tork Controls,
Coimbatore
SF 652/4A, SIR C.V. Raman Layout, Near Rathinam Collage,
Kurichi, Coimbatore-641021, Tamilnadu
[email protected]@gmail.com
Up to 900 mmUp to PN
2.5without ISI
mark11-2-2022 Swing Check
16M/s. Kamala Valves
Manufacturing Concern, Howrah
31/2, Y road, Belgachia, Kazipara, Howrah-711108
[email protected] to 600 mm
PN 1.0 & PN 1.6
With ISI Mark 11-2-2022
17M/s. Indian valve Pvt. Ltd., Nasik
Plot No. 53, Industrial Estate, Satpur, Nasik- 422007,
50 to 1800 mm Upto PN
2.5Without ISI
Mark30-6-2021 CI/DI
18M/s. CRI pumps Pvt. Ltd., Coimbtore
Rago Industries, S.F.No. 10/150, Masagounden Chettipalayam,
Oraikalpalayam, Kunnathur pudur (P), Coimbatore- 641107,
50 to 400 mmPN-1.0 & PN-1.6
without ISI mark
30-6-2021 Swing Check
19M/s. SAP Industries
Ltd., Ahmedabad
10-A, Krishna Industrial estate, Nr. Sukharampura Post Office,
Nagarvel Hanuman Road, Rakhial, Ahmedabad- 380023
Up to 16"PN 1.0 &
PN 1.6 Without ISI
Mark30-6-2021
14M/s. Aarko
Manufacturing co., Jalandhar
75, Industrial Estate Extention, Behind Sharp Chucks, Jalandhar -
[email protected]@aarko.in
11-2-2022
DISwing Check
M/s. Kejriwal Castings Ltd., Howrah
MH-6 Chamrail, Near Kona Express Highway, Howrah-
10 30-6-2021
Swing Check
30-6-2021
M/s. Indian Valve International, Howrah
69A, Balitikuri Industrial Estate, Howrah-711113
30-6-202112
11M/s. McWane
Services Pvt. Ltd., Coimbatore
143/2A, Anna Nagar Road, Neelambur, Coimbatore-641062
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class
Approval Valid up to Date
RemarksISI Mark
20M/s. Bharat
Engineering Works, Dhrangadhra
Plot No. 66-67, Phase-K, Mayurnagar, B/h. T.V. Station, Dhrangadhra-363310, [email protected]
40 mm to 600 mm
Up to PN 2.0
Without ISI mark
9-2-2024
21M/s. VAG Valves (India) Pvt. Ltd.,
Telangana
Plot No. 57 & 56, Phase-III, TSIIC, Pashamylaram,
Patancheru (M), Sangareddy (D), Telangana,
40 to 1200 mm (DI)
PN 1.0, 1.6 & PN 2.5
Without ISI Mark
9-2-2024
22M/s. Kirloskar
Brothers Ltd., Pune
Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri, Taluka-Shirpur, Dist.
Pune, [email protected]
[email protected]@kbl.co.in
-Recommended by VSC
50 mm to 600 mm
PN 1.0 & PN 1.6
With ISI mark
350 to 1000 mm
PN 1.0Without ISI
mark50 mm to 600
mmPN 1.0 &
PN 1.6 With ISI mark
700 to 1400 mm
PN 1.0 & PN 1.6
Without ISI mark
Up to 600 mmPN 1.0 &
PN 1.6 With ISI mark
Up to 1200 mm
Up to PN 3.0
Without ISI mark
26M/s. Veeson Valves Pvt. Ltd., Jalandhar
DRP Lane, Bulandpur Road, Jalandhar-144 012, Punjab
[email protected] to 300 mm
PN 1.0 & PN 1.6
With ISI mark '25-4-2024
27M/s. R.G. Industries,
Jalandhar
Vill:-Fazalpur, Behind Focal Point,
Jalandhar-144004, [email protected]
om
Up to 600 mmPN 1.0 &
PN 1.6 With ISI mark '25-4-2024
28M/s. G M
ENGINEERING PVT. LTD., Rajkot
Plot No. 2632, GIDC LODHIKA, VILLAGE METODA, RAJKOT-
360021 [email protected]
125 to 300 mm PN 1.0 With ISI mark '25-4-2024
29M/s. Shiva Industries,
Jaipur
Unit:-1- KH No. 518, Near Vaidh ji Ka Chouraha, Niwaroo Road, Jhotwara,
Jaipur- [email protected]
50 to 600 mmPN 1.0 &
PN 1.6 Without ISI
mark'25-4-2024
25-4-2024
25-4-2024
25-4-2024
M/s. Jupiter Engineering Co.,
Howrah
Kashipur, Dasnagar, Howrah-711105
Non Return Valves
25M/S. HAWA
ENGINEERS LTD., Ahmedabad
Unit-1:- 129,B/h. Kashiram Textile Mills, Narol Road,
Ahmedabad-382 405 [email protected]
24
M/S. K P Mondal & Sons, Howrah
Howrah Amta Road, Dasnagar, Howrah – 71105
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class
Approval Valid up to Date
RemarksISI Mark
50 to 700 mm PN 1.0 With ISI mark
50 to 1000 mm PN 1.0Without ISI
mark
50 to 600 mmPN 1.0 &
PN 1.6 With ISI mark
up to 700 mm PN 1.0Without ISI
mark
32M/s. Kartar Valves Pvt. Ltd., Jalandhar
Juneja Complex, Village- Variana, Kapurthala
Road, [email protected]
50 to 600 mm PN 1.0 &
PN 1.6With ISI mark '25-4-2024
50 to 600 mm PN 1.0 &
PN 1.6With ISI mark
up to 1600 mm
PN 1.0Without ISI
mark
50 to 600 mm PN 1.0 &
PN 1.6With ISI mark
up to 2000 mm
PN 1.0Without ISI
mark
35M/S. Zoloto
Industries., Jalandhar
Zoloto House, 11th Mile Stone, Nakodar Road,
Lambra, Jalandhar – [email protected]
50 to 300 mmPN 1.0 &
PN 1.6With ISI mark '25-4-2024
50 to 600 mm PN 1.0 &
PN 1.6With ISI mark
50 to 1200 mmUp to PN
4.0Without ISI
mark
37M/S. R & D MULTIPES PVT. LTD. (PLANT-2)
Plant-2, Survey No. 304, Balda, Pardi-396125, Dist. Valsad, Gujarat
[email protected] [email protected]
50 to 2200 mmUp to PN
2.5Without ISI
mark'25-4-2024
50 to 600 mm PN 1.6 With ISI mark
Up to 1600 mm
PN 1.0Without ISI
mark
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
M/S. Kalpana Vaves Mfg.Co.(P) Ltd.,
Howrah
Ghosh Para, Balitikuri, Howrah-711113.
25-4-202431
M/s. Durga Valves PVT.LTD., Howrah
Village & Post: Mahiserkha, Tusiberia Road (Near Ideal School), PS: Uluberia, Dist:
Howrah- 711 303 [email protected]
[email protected] [email protected]
25-4-2024
30
M/S. KETAN ENGINEERING WORKS
, Surendranagar
Plot no. 34, opp. Pramukh Packaging, Nr. Pooja Dhanadal,
S'nagar-Rajkot Highway, Shekhpar, Surendranagar
ketanengiw@yahoo,in
25-4-202436
M/S. Calsens Private Limited., Kolkata
6/1A British Indian Street, Kolkata- [email protected]
25-4-202434
33
M/S. Shree Balaji Industries, Howrah
72/A, Manikpirtala, 2nd Bye Lane, Howrah-711113
M/s. Mahadevi Industries, Howrah
Salap, NH-6, Domjur, Howrah-711409,
West [email protected]
12/07/202438
Size (mm) Class
1 2 3 4 5 6 7 8
1M/s. Delval Flow Controls Pvt. Ltd.,
Pune
GAT No. 25+37+43/1A, At-Kavathe, Post Javale, Taluka
Khandala, District-Satara-412801
80 to 2200 mm
PN 10
Without ISI mark
(As per BS EN 593/API 609
Specification)
30-6-2021-
50 to 300 mmPN 1.0 to
1.6
Wafer Short (resilient Seated)
200 to 1200 mm
PN 1.0 to 1.6
Double flange short, (resilient
Seated)
3M/s. Intervalve
(India) Ltd., Pune
94/1 Manjari, Off Soli, Poonawalla Road, Pune-
m
40 to 2400 mm
PN 0.6, PN 1.0, PN 1.6
Without ISI mark
(As per IS 13095/ BSEN
593/API -609 / AWWA C 504)
30-6-2021 CI, SGI (DI), M.S. Fabricated
4M/s. Perfect valves Pvt. Ltd., Jalandhar
Waryana Industrial Complex, Sangal Sohal Road, Adjoining Leather Complex, Jalandhar-
40 to 300 mm & 350 to 600
mm
PN 1.0 & PN 1.6
With ISI Mark 30-6-2021
5M/s. Fouress
Engineering (I) Ltd., Banglore
Plot-2, Phase-II, Peanga Industrial Area, Banglore-
100 to 4000 mm
Up to PN 40 (40 Bar)
Without ISI Mark
30-6-2021
6M/s. S & M
Industrial Valves Ltd., Kolkata
Sadananda Industrial Estate, Balitikuri, Bakultala,
Howrah-711 [email protected]
up to 900 mmup to PN
1.6Without ISI
Mark30-6-2021 -
40 to 300 mmup to PN
1.6With ISI Mark
350 to 700 mm
up to PN 1.6
Without ISI Mark
8M/s. Dynamic Valves
Pvt. Ltd., Mumbai
R-353, Rabale MIDC, Navi Mumbai-400701
Up to 1800 mm
up to PN 1.6
Without ISI Mark
30-6-2021 -
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR
List of Approved Vendors of GWSSB for supply of Butterfly Valves (IS 13095) as per Vendor Selection Report submitted by Different TPI (As on dt. 13-7-2021)
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
C-9 & C-11, Canal Road, Insustrial Area, Jalandhar-
144004, [email protected]
30-6-2021 -M/s. Sondhi
Industries, Jalandhar
30-6-20212
M/s. Upadhaya valves
Manufacturers Pvt. Ltd., Kolkatta
7
With ISI Mark
P 280 Benaras road, Howrah-711108
[email protected]@upadhayavalves.net
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
9
M/s. Rotex Manufacturers & Engineering Pvt.
Ltd., Thane (Maharashtra)
Manpada Road, Near Bhopar Village, Dombivli (E), Dist.
Thane, [email protected]@rotexindia.com
Up to 2600 mm
Up to PN 16
Without ISI mark
30-6-2021
50 to 300 mmUp to PN
1.6With ISI mark
350 to 500 mm
Up to PN 1.6
Without ISI mark
350 to 2000 mm
PN 1.0 & PN 1.6
With ISI mark CL-125/ CL-150
2000 to 2400 mm
Up to PN 2.0
Without ISI mark
80 to 1200 mm
PN 1.0 & PN 1.6
With ISI mark
Up to 2500 mm
Up to PN 1.6
Without ISI mark
Double Flange
40 to 600 mmPN 1.0 &
PN 1.6 With ISI mark
700 to 2000 mm
PN 1.0, PN 1.6 & PN
2.5
Without ISI mark
250 to 1000 mm
Up to PN 1.6
With ISI mark
250 to 1400 mm
Up to PN 1.6
Without ISI mark
15M/s. Bir Industries,
Jalandhar
G.T. Road, Bye Pass, Maqsoodan, Jalandhar-144008
100 to 600 mm
PN 1.0 & PN 1.6
Without ISI mark
30-6-2021
40 to 300 mm PN 1.0 With ISI mark
Up to 1000 mm
Up to PN 1.6
without ISI mark
10M/s. Mac
International, Jalandhar
Industrial Enclave, V.P.O. Randhawa Masandan,
30-6-2021
M/s. G.M. Dalui & Sons (Pvt.) Ltd.,
Howrah
Vivekanand industrial estate, Balitikuri, Bakultala, Howrah-
711402 [email protected]
[email protected]@gmail.com,
30-6-202111
M/s. Indian Valve International,
Howrah
69A, Balitikuri Industrial Estate, Howrah-711113
30-6-2021
12
M/s. McWane Services Pvt. Ltd.,
Coimbatore13
143/2A, Anna Nagar Road, Neelambur, Coimbatore-
30-6-2021DI
M/s. Kejriwal Castings Ltd.,
Howrah
MH-6 Chamrail, Near Kona Express Highway, Howrah-
30-6-2021
16M/s. Aarko
Manufacturing co., Jalandhar
75, Industrial Estate Extention, Behind Sharp Chucks,
Jalandhar [email protected]@aarko.in
11-2-2022
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
17M/s. V-Tork
Controls, Coimbatore
SF 652/4A, SIR C.V. Raman Layout, Near Rathinam Collage,
Kurichi, Coimbatore-641021, Tamilnadu
[email protected]@gmail.com
Up to 1000 mm
up to PN 1.0
Without ISI mark
11-2-2022
18M/s. Kamala Valves
Manufacturing Concern, Howrah
31/2, Y road, Belgachia, Kazipara, [email protected]
40 to 1200 mm
PN 1.0 & PN 1.6
With ISI mark 11-2-2022
19M/s. Indian valve Pvt. Ltd., Nasik
Plot No. 53, Industrial Estate, Satpur, Nasik- 422007,
200 to 2700 mm
Upto PN 2.5
Without ISI Mark
30-6-2022
20M/s. CRI pumps Pvt.
Ltd., Coimbtore
Rago Industries, S.F.No. 10/150, Masagounden
Chettipalayam, Oraikalpalayam, Kunnathur
pudur (P), Coimbatore- 641107, Tamilnadu
200 to 1500 mm
PN-1.0 & PN-1.6
With ISI mark 30-6-2022
21M/s. SAP Industries
Ltd., Ahmedabad
10-A, Krishna Industrial estate, Nr. Sukharampura Post Office,
Nagarvel Hanuman Road, Rakhial, Ahmedabad- 380023
Up to 24"PN 1.0 &
PN 1.6 Without ISI
Mark30-6-2022
22M/s. Festo India Private Limited,
Bengaluru
225 & 226, Bommasandra, Industrial Area, Bengaluru-
Up to 700 mm Up to PN
1.6Without ISI
Mark30-6-2022
23M/s. Bharat
Engineering Works, Dhrangadhra
Plot No. 66-67, Phase-K, Mayurnagar, B/h. T.V. Station, Dhrangadhra-363310, [email protected]
50 to 2000 mm
Up to PN 3.0
Without ISI mark
9-2-2024
24M/s. VAG Valves (India) Pvt. Ltd.,
Telangana
Plot No. 57 & 56, Phase-III, TSIIC, Pashamylaram,
Patancheru (M), Sangareddy (D), Telangana,
50 to 4000 mm (DI)
PN 1.0, PN 1.6 & PN
2.5
Without ISI mark
9-2-2024 -
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
25M/s. Kirloskar
Brothers Ltd., Pune
Kirloskar Brothers Ltd., Valve Business Unit, Gate no.
252/253, Kondhapuri, Taluka-Shirpur, Dist. Pune, [email protected]
[email protected]@kbl.co.in
-Recommended by VSC
350 to 1200 mm
PN 1.0
350 to 600 mm
PN 1.6
40 to 1200 mm
PN 1.0
40 to 2000 mm
PN 1.6
1800 to 2000 mm
PN 1.0 & PN 1.6
Without ISI Mark
Up to 1200 mm
PN 1.0 & PN 1.6
With ISI mark
Up to 3000 mm
PN 1.0 & PN 1.6
Up to 1200 mm
PN 2.0, PN 2.5 & PN
3.0
29M/s. Veeson Valves Pvt. Ltd., Jalandhar
DRP Lane, Bulandpur Road, Jalandhar-144 012, Punjab
[email protected] to 300 mm
PN 1.0 & PN 1.6
With ISI mark 25-4-2024
30M/s. R.G. Industries,
Jalandhar
Vill:-Fazalpur, Behind Focal Point,
Jalandhar-144004, Punjabenquiry@rgindustriessachdev
a.com
Up to 600 mm PN 1.0 &
PN 1.6 With ISI mark 25-4-2024
40 to 600 mm PN 1.0
40 to 2000 mm
PN 1.6
32M/s. Shiva
Industries, Jaipur
Unit:-1- KH No. 518, Near Vaidh ji Ka Chouraha, Niwaroo Road, Jhotwara,
Jaipur- [email protected]
50 to 700 mmPN 1.0 &
PN 1.6 Without ISI
Mark25-4-2024
50 to 1000 mm
PN 1.0
50 to 600 mm PN 1.6
Butterfly Valves
M/S. K P Mondal & Sons, Howrah
Howrah Amta Road, Dasnagar, Howrah – 71105
[email protected] ISI mark 25-4-202426
With ISI mark27
M/s. Jupiter Engineering Co.,
Howrah
Kashipur, Dasnagar, Howrah-711105
Without ISI Mark
28M/S. HAWA
ENGINEERS LTD., Ahmedabad
Unit-1:- 129,B/h. Kashiram Textile Mills, Narol Road,
Ahmedabad-382 405 [email protected]
25-4-2024
With ISI mark 25-4-2024
Plot No. 2632, GIDC LODHIKA, VILLAGE METODA, RAJKOT-
360021 [email protected]
M/s. G M ENGINEERING PVT.
LTD., Rajkot31
M/S. Kalpana Vaves Mfg.Co.(P) Ltd.,
Howrah
Ghosh Para, Balitikuri, Howrah-711113.
[email protected] ISI mark 25-4-202433
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
40 to 300 mmPN 1.0 &
PN 1.6 With ISI mark
Up to 1500 mm
PN 1.0Without ISI
Mark
35M/s. Kartar Valves Pvt. Ltd., Jalandhar
Juneja Complex, Village- Variana, Kapurthala
Road, [email protected]
25 to 600 mm PN 1.0 &
PN 1.6With ISI mark 25-4-2024
40 to 1200 mm
PN 1.0 & PN 1.6
With ISI mark
1400 to 2000 mm
PN 1.6 With ISI mark
Up to 1800 mm
PN 2.0Without ISI
Mark
40 to 1200 mm
PN 1.0 & PN 1.6
With ISI mark
Up to 1600 mm
PN 1.0Without ISI
Mark
38M/S. Zoloto Industries., Jalandhar
Zoloto House, 11th Mile Stone, Nakodar Road, Lambra, Jalandhar –
40 to 300 mmUp to PN
1.6With ISI mark 25-4-2024
40 to 2000 mm
PN 1.0 & PN 1.6
With ISI mark
40 to 2000 mm
Up to PN 4.0
Without ISI Mark
40
M/S. R & D Multiples (Metal
Cast) Pvt. Ltd. (PLANT-1)
Plant-1, A1/17,GIDC Pardi,Dist.Valsad,Gujarat-396 125
[email protected] [email protected]
50 to 1000 mm
PN 1.0 & PN 1.6
With ISI mark 25-4-2024
1100 to 2000 mm
PN 1.0 & PN 1.6
With ISI mark
2100 to 3600 mm
Up to PN 2.5
Without ISI Mark
M/S. Shree Balaji Industries, Howrah
72/A, Manikpirtala, 2nd Bye Lane, Howrah-711113
36M/s. Durga Valves PVT.LTD., Howrah
Village & Post: Mahiserkha, Tusiberia Road (Near Ideal School), PS: Uluberia, Dist:
Howrah- 711 303 [email protected]
[email protected] [email protected]
25-4-2024
M/S. Calsens Private Limited., Kolkata
6/1A British Indian Street, Kolkata- [email protected]
25-4-202437
M/S. KETAN ENGINEERING
WORKS , Surendranagar
Plot no. 34, opp. Pramukh Packaging, Nr. Pooja Dhanadal,
S'nagar-Rajkot Highway, Shekhpar, Surendranagar
ketanengiw@yahoo,in
25-4-202439
25-4-2024
Plant-2, Survey No. 304, Balda, Pardi-396125, Dist. Valsad, Gujarat
[email protected] [email protected]
M/S. R & D MULTIPES PVT. LTD.
(PLANT-2)41
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
50 to 1200 mm
PN 1.0
50 to 600 mm PN 1.6
Up to 1600 mm
PN 1.0Without ISI
Mark
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
M/s. Mahadevi Industries, Howrah
Salap, NH-6, Domjur, Howrah-711409,
West [email protected]
42With ISI mark
12/07/2024
Size (mm) Class
1 2 3 4 5 6 7 8 9
upto 40 mmPN 1.0 &
1.6S1
upto 50 mmPN 1.0 &
1.6S2
50 to 200 mm
PN 1.0 & 1.6
DS2 & DK
15 to 80 mmPN 1.0 &
1.6Single Acting
Without ISI mark
40 to 200 mm
PN 1.0 & 1.6
Double Acting
Without ISI mark
40 to 200 mm
PN 1.0 & 1.6
Temper Proof
Without ISI mark
As per AWWA C -
512
3M/s. Flownix valves
Pvt. Ltd., Pune
Gate no.1, Plot No. 24, Atul Industrial Premises, Talawade,
up to 400 mm
Up to 24 kg/sqcm
-Without ISI
mark30-6-2021
-
4M/s. S & M Industrial Valves Ltd., Kolkata
Sadananda Industrial Estate, Balitikuri, Bakultala,
Howrah-711 [email protected]
Up to 200 mm
Up to PN 1.6
-Without ISI
mark30-6-2021 -
5M/s. Sondhi
Industries,Jalandhar
C-9 & C-11, Canal Road, Insustrial Area, Jalandhar-
144004, [email protected]
Up to 200 mm
Up to PN 1.6
-Without ISI
mark30-6-2021 -
6
M/s. Rotex Manufacturers &
Engineering Pvt. Ltd., Thane (Maharashtra)
Manpada Road, Near Bhopar Village, Dombivli (E), Dist.
Thane, [email protected]@rotexindia.com
Up to 200 mm
Up to PN 25
-Without ISI
mark30-6-2021
7M/s. Mac
International, Jalandhar
Industrial Enclave, V.P.O. Randhawa Masandan,
15 to 200 mm
Up to PN 1.6
-Without ISI
mark30-6-2021
50 to 200 mm
PN 1.0 & PN 1.6
- With ISI Mark
25 to 40 mmPN 1.0 &
PN 1.6-
Without ISI mark
50 to 200 mm
PN 1.0 & PN 1.6
Temper Proof
Without ISI mark
As per AWWA C -512
8
1
M/s. Upadhaya valves
Manufacturers Pvt. Ltd., Kolkatta
P 280 Benaras road, Howrah-711108
[email protected]@upadhayavalves.net
With ISI mark
30-6-2021
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of C.I. Air Valves (IS 14845) as per Vendor Selection Report
submitted by Different TPI (As on dt. 13-7-2021)
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI MarkType
-
Resilient Seated
2M/s. Bikaner
Engineering Works, Jaipur
F-445, Road No. 12, V.K.I. Area, Jaipur-302013
30-6-2021
Vivekanand industrial estate, Balitikuri, Bakultala, Howrah-
711402 [email protected]
[email protected]@gmail.com,
M/s. G.M. Dalui & Sons (Pvt.) Ltd.,
Howrah
Size (mm) Class
1 2 3 4 5 6 7 8 9
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI MarkType
15 to 40 mmPN 1.0 &
PN 1.6S-1
25 to 50 mmPN 1.0 &
PN 1.6S-2
40 to 200 mm
PN 1.0 & PN 1.6
DS-1, DS-2 , DK
40 to 200 mm
Up to PN 1.6
Temper Proof
(Kinetic Type)
Without ISI mark
As per AWWA C -
512
Up to 200 mm
PN 1.0 & PN 1.6
-Without ISI
markDI
Up to 200 mm
PN 1.0 & PN 1.6
Temper Proof
Without ISI mark
DI (As per AWWA C -
512)
15 to 25 mm PN 1.0 Single ActingWithout ISI
mark40 to 200
mmUp to PN
1.6DS1, DS2 &
KineticWithout ISI
mark
Up to 200 mm
Up to PN 1.6
Temper Proof
(kinetic)
Without ISI mark
12M/s. Bir Industries,
Jalandhar
G.T. Road, Bye Pass, Maqsoodan, Jalandhar-
50 to 200 mm
PN 1.0 & PN 1.6
Temper Proof
Without ISI mark
30-6-2021As per
AWWA C -512
Up to 50 mmUp to PN
1.6Screwed
SingleWithout ISI
mark
Up to 200 mm
Up to PN 1.6
Flanged Double
Without ISI mark
14M/s. V-Tork Controls,
Coimbatore
SF 652/4A, SIR C.V. Raman Layout, Near Rathinam
Collage, Kurichi, Coimbatore-641021, Tamilnadu
[email protected]@gmail.com
Up to 200 mm
Up to PN 1.0
-Without ISI
mark11/2/2022
15 to 200 mm
PN 1.0 & PN 1.6
- With ISI mark
Up to 200 mm
-Temper
proofWithout ISI
mark40 to 200
mm Upto PN
2.5-
Without ISI Mark
40 to 200 mm
Upto PN 2.5
Temper proof
Without ISI Mark
As per AWWA C -
512
15M/s. Kamala Valves
Manufacturing Concern, Howrah
31/2, Y road, Belgachia, Kazipara, [email protected]
11/2/2022
16M/s. Indian valve
Pvt. Ltd., Nasik
Plot No. 53, Industrial Estate, Satpur, Nasik- 422007,
30-6-2021
9M/s. Kejriwal Castings Ltd.,
Howrah
MH-6 Chamrail, Near Kona Express Highway, Howrah-
30-6-2021
With ISI mark
30-6-202169A, Balitikuri Industrial Estate, Howrah-711113
M/s. Indian Valve International,
Howrah11
10M/s. McWane
Services Pvt. Ltd., Coimbatore
143/2A, Anna Nagar Road, Neelambur, Coimbatore-
30-6-2021
13M/s. Aarko
Manufacturing co., Jalandhar
75, Industrial Estate Extention, Behind Sharp
Chucks, Jalandhar [email protected]@aarko.in
11/2/2022
-
Size (mm) Class
1 2 3 4 5 6 7 8 9
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI MarkType
17M/s. CRI pumps Pvt. Ltd., Coimbtore
Rago Industries, S.F.No. 10/150, Masagounden
Chettipalayam, Oraikalpalayam, Kunnathur
pudur (P), Coimbatore- 641107, Tamilnadu
50 to 200 mm
PN-1.0 & PN-1.6
Single Acting, Double Acting, Kinetic
Without ISI Mark
30-6-2021
25 mm to 200 mm
Up to PN 4.0
-Without ISI
mark
40 mm to 200 mm
Up to PN 4.0
Temper Proof
Without ISI mark
19M/s. VAG Valves (India) Pvt. Ltd.,
Telangana
Plot No. 57 & 56, Phase-III, TSIIC, Pashamylaram,
Patancheru (M), Sangareddy (D), Telangana,
25 to 200 mm (D.I.)
PN 1.0, PN 1.6 &
PN 2.5-
Without ISI mark
9-2-2024
20M/s. Kirloskar
Brothers Ltd., Pune
Kirloskar Brothers Ltd., Valve Business Unit, Gate no.
252/253, Kondhapuri, Taluka-Shirpur, Dist. Pune,
[email protected]@kbl.co.in
-Recommended by VSC
40 to 200 mm
PN 1.0 & PN 1.6
DK Type With ISI mark
Up to 200 mm
PN 1.0 & PN 1.6
Temper Proof
Without ISI Mark
As per AWWA C -512
15 to 40 mmPN 1.0 &
PN 1.6S1
25 to 50 mmPN 1.0 &
PN 1.6S2
40 to 200 mm
PN 1.0 & PN 1.6
DS1, DS2 & DK
up to 300 mm
PN 1.0, PN 1.6 &
PN 2.0
Temper Proof
Without ISI Mark
As per AWWA C -512
M/S. K P Mondal & Sons, Howrah
Howrah Amta Road, Dasnagar, Howrah – [email protected]
21 25-4-2024
With ISI mark
22
Air valves
9-2-202418M/s. Bharat
Engineering Works, Dhrangadhra
Plot No. 66-67, Phase-K, Mayurnagar, B/h. T.V. Station, Dhrangadhra-363310, [email protected]
m
25-4-2024Kashipur, Dasnagar,
M/s. Jupiter Engineering Co.,
Howrah
Size (mm) Class
1 2 3 4 5 6 7 8 9
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI MarkType
15 to 40 mmPN 1.0 &
PN 1.6S1
25 to 50 mmPN 1.0 &
PN 1.6S2
40 to 200 mm
PN 1.0 & PN 1.6
DS1, DS2 & DK
Up to 200 mm
UP to PN 2.5
S1, S2, DS1-DS2, DK
Without ISI Mark
up to 300 mm
Up to PN 2.5
Temper Proof
Without ISI Mark
As per AWWA C -512
24M/s. R.G. Industries,
Jalandhar
Vill:-Fazalpur, Behind Focal Point,
Jalandhar-144004, Punjabenquiry@rgindustriessachde
va.com
Up to 200 mm
PN 1.0 & PN 1.6
- With ISI mark 25-4-2024
25M/s. G M
ENGINEERING PVT. LTD., Rajkot
Plot No. 2632, GIDC LODHIKA, VILLAGE METODA, RAJKOT-
360021 [email protected]
Up to 250 mm
PN 1.0 & PN 1.6
-Without ISI
Mark25-4-2024
15 to 80 mmPN 1.0 &
PN 1.6Single Acting
Without ISI Mark
40 to 200 mm
PN 1.0 & PN 1.6
Double Acting
Without ISI Mark
40 to 200 mm
PN 1.0 & PN 1.6
Temper Proof
Without ISI Mark
As per AWWA C -512
27M/S. Kalpana Vaves
Mfg.Co.(P) Ltd., Howrah
Ghosh Para, Balitikuri, Howrah-711113.
[email protected] to 200
mmPN 1.0 -
Without ISI Mark
25-4-2024
40 to 200 mm
UP to PN 2.5
DS1-DS2, DK
With ISI Mark
40 to 300 mm
PN 1.0 & PN 1.6
Temper Proof
Without ISI Mark
As per AWWA C -512
29M/s. Kartar Valves Pvt. Ltd., Jalandhar
Juneja Complex, Village- Variana, Kapurthala
Road, [email protected]
15 to 200 mm
PN 1.0 & PN 1.6
- With ISI mark 25-4-2024
40 to 200 mm
PN 1.0 & PN 1.6
- With ISI Mark
40 to 300 mm
PN 1.0 & PN 1.6
Temper Proof
Without ISI Mark
As per AWWA C -512
40 to 200 mm
PN 1.0 & PN 1.6
DS1-DS2, DK
With ISI Mark
40 to 300 mm
PN 1.0 & PN 1.6
Temper Proof
Without ISI Mark
As per AWWA C -512
M/S. Shree Balaji Industries, Howrah
72/A, Manikpirtala, 2nd Bye Lane, Howrah-
Unit:-1- KH No. 518, Near Vaidh ji Ka Chouraha, Niwaroo Road, Jhotwara,
Jaipur- [email protected]
25-4-2024
With ISI mark
25-4-2024
Unit-1:- 129,B/h. Kashiram Textile Mills, Narol Road,
Ahmedabad-382 405 [email protected]
M/S. HAWA ENGINEERS LTD.,
Ahmedabad
25-4-202431
25-4-2024M/s. Durga Valves PVT.LTD., Howrah
Village & Post: Mahiserkha, Tusiberia Road (Near Ideal School), PS: Uluberia, Dist:
Howrah- 711 303 [email protected]
[email protected] [email protected]
30
M/S. Calsens Private Limited., Kolkata
6/1A British Indian Street, Kolkata- [email protected]
25-4-202428
23
26M/s. Shiva
Industries, Jaipur
Size (mm) Class
1 2 3 4 5 6 7 8 9
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI MarkType
40 to 200 mm
PN 1.0 & PN 1.6
Double Acting
With ISI Mark
40 to 200 mm
Up To PN 4.0
Temper Proof
Without ISI Mark
As per AWWA C -512
33M/S. R & D
MULTIPES PVT. LTD. (PLANT-2)
Plant-2, Survey No. 304, Balda, Pardi-396125, Dist. Valsad, Gujarat
[email protected] [email protected]
50 to 300 mm
Up To PN 2.5
-Without ISI
Mark25-4-2024
40 to 200 mm
PN 1.6 DS1,DS2, DK With ISI Mark
40 to 200 mm
PN 1.0 & PN 1.6
Temper Proof
Without ISI Mark
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
M/s. Mahadevi Industries, Howrah
Salap, NH-6, Domjur, Howrah-711409,
West [email protected]
m
12/07/202434
M/S. KETAN ENGINEERING
WORKS , Surendranagar
Plot no. 34, opp. Pramukh Packaging, Nr. Pooja
Dhanadal, S'nagar-Rajkot Highway, Shekhpar,
Surendranagarketanengiw@yahoo,in
25-4-202432
Size (mm) Class
1 2 3 4 5 6 7 8
1M/s. Sondhi
Industries,Jalandhar
C-9 & C-11, Canal Road, Insustrial Area, Jalandhar-
144004, [email protected]
Up to 400 mm
-Without ISI mark
30-6-2021Dual Plate
AS per API 594 & 598
2M/s. Orbinox India Pvt.
Ltd., Coimbatore
S.F. No.680/3A2B, 608/3A1B, Eachanari-Chettipalayam Road, Eachanari Post, Coimbtore-641
[email protected]@orbin
ox.com
50 to 800 mm
-Without ISI mark
30-6-2021 -
3M/s. Mac International,
Jalandhar
Industrial Enclave, V.P.O. Randhawa Masandan, Jalandhar-
50 to 450 mm
Up to PN 1.6
Without ISI mark
30-6-2021Dual Plate
AS per API 594
4M/s. G.M. Dalui & Sons
(Pvt.) Ltd., Howrah
Vivekanand industrial estate, Balitikuri, Bakultala, Howrah-
711402 [email protected]
[email protected]@gmail.com,
Up to 3000 mm
Up to PN 1.6
Without ISI mark
30-6-2021 Dual Plate AS per API 594
5M/s. Kejriwal Castings
Ltd., Howrah
MH-6 Chamrail, Near Kona Express Highway, Howrah-
50 to 1200 mm
Up to PN 1.6
Without ISI mark
30-6-2021 Dual Plate AS per API 594
6M/s. McWane Services Pvt. Ltd., Coimbatore
143/2A, Anna Nagar Road, Neelambur, Coimbatore-641062
50 to 700 mm
PN 1.0, PN 1.6 &
PN 2.5
Without ISI mark
30-6-2021 DI Dual Plate AS per API 594
7M/s. Indian Valve
International, Howrah
69A, Balitikuri Industrial Estate, Howrah-711113
50 to 1200 mm
Up to PN 1.6
Without ISI mark
30-6-2021 Dual Plate AS per API 594
8M/s. Kamala Valves & Engineering Pvt. Ltd.,
Howrah
41/2. "Q" Road, Belgachia, Howrah-711108, West Bengal
[email protected]@vsnl.net
50 to 800 mm
Up to PN 1.6
Without ISI mark
30-6-2021 Dual Plate AS per API 594
9M/s. Aarko
Manufacturing co., Jalandhar
75, Industrial Estate Extention, Behind Sharp Chucks, Jalandhar -
[email protected]@aarko.in
up to 300 mm
Up to PN 1.6
Without ISI mark
11-2-2022Dual Plate
AS per API 594
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Check Valves as per Vendor Selection Report
submitted by Different TPI (As on dt. 13-7-2021)
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size &
Approval Valid up to Date
RemarksISI Mark
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size &
Approval Valid up to Date
RemarksISI Mark
10M/s. V-Tork Controls,
Coimbatore
SF 652/4A, SIR C.V. Raman Layout, Near Rathinam Collage,
Kurichi, Coimbatore-641021, Tamilnadu
[email protected]@gmail.com
Up to 80 mm
Up to PN 1.6
Without ISI mark
11-2-2022Dual Plate
As per API 594
11M/s. Kamala Valves
Manufacturing Concern, Howrah
31/2, Y road, Belgachia, Kazipara, [email protected]
Up to 1000 mm
Without ISI mark
11-2-2022 Dual Plate
12M/s. Indian valve Pvt. Ltd., Nasik
Plot No. 53, Industrial Estate, Satpur, Nasik- 422007,
50 to 1400 mm
Upto PN 1.6
Without ISI Mark
30-6-2021Dual Plate
13M/s. CRI pumps Pvt. Ltd., Coimbtore
Rago Industries, S.F.No. 10/150, Masagounden Chettipalayam,
Oraikalpalayam, Kunnathur pudur (P), Coimbatore- 641107,
40 to 600 mm
PN-1.0 & PN-1.6
Without ISI mark
30-6-2021 Dual Plate AS per API 594
14M/s. Bharat Engineering
Works, Dhrangadhra
Plot No. 66-67, Phase-K, Mayurnagar, B/h. T.V. Station, Dhrangadhra-363310, [email protected]
50 mm to 1600 mm
Up to PN 1.6
Without ISI mark
9-2-2024 Dual Plate
AS per API 594
15M/s. Kirloskar Brothers
Ltd., Pune
Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri, Taluka-Shirpur, Dist.
Pune, [email protected]
[email protected]@kbl.co.in
Recommended by VSC
16M/S. K P Mondal & Sons,
Howrah
Howrah Amta Road, Dasnagar, Howrah – 71105
Up to 1000 mm
PN-1.0 & PN-1.6
Without ISI mark
'25-4-2024 Dual Plate
AS per API 594
17M/s. Jupiter Engineering
Co., Howrah
Kashipur, Dasnagar, Howrah-711105
Up to 1200 mm
PN-1.0 & PN-1.6
Without ISI mark
'25-4-2024 Dual Plate
AS per API 594
18M/S. HAWA ENGINEERS
LTD., Ahmedabad
Unit-1:- 129,B/h. Kashiram Textile Mills, Narol Road,
Ahmedabad-382 405 [email protected]
Up to 2400 mm
Up to PN 2.5
Without ISI mark
'25-4-2024 Dual Plate
AS per API 594
19M/s. Veeson Valves Pvt.
Ltd., Jalandhar
DRP Lane, Bulandpur Road, Jalandhar-144 012, Punjab
[email protected] to 300
mmUp to PN 1.6
Without ISI mark
'25-4-2024 Dual Plate
AS per API 594
Check Valves
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size &
Approval Valid up to Date
RemarksISI Mark
20M/s. R.G. Industries,
Jalandhar
Vill:-Fazalpur, Behind Focal Point,
Jalandhar-144004, Punjabenquiry@rgindustriessachdeva.
com
Up to 600 mm
PN-1.0 & PN-1.6
Without ISI mark
'25-4-2024 Dual Plate
AS per API 594
21M/s. G M ENGINEERING
PVT. LTD., Rajkot
Plot No. 2632, GIDC LODHIKA, VILLAGE METODA, RAJKOT-
360021 [email protected]
Up to 1800 mm
PN-1.0 & PN-1.6
Without ISI mark
'25-4-2024 Dual Plate
AS per API 594
22M/s. Shiva Industries,
Jaipur
Unit:-1- KH No. 518, Near Vaidh ji Ka Chouraha, Niwaroo Road, Jhotwara,
Jaipur- [email protected]
50 to 700 mm
PN-1.0 & PN-1.6
Without ISI mark
'25-4-2024 Dual Plate
AS per API 594
23M/S. Kalpana Vaves
Mfg.Co.(P) Ltd., Howrah
Ghosh Para, Balitikuri, Howrah-711113.
50 to 500 mm
PN-1.6Without ISI mark
'25-4-2024 Dual Plate
AS per API 594
24M/S. Shree Balaji
Industries, Howrah
72/A, Manikpirtala, 2nd Bye Lane, Howrah-711113
Up to 900 mm
PN-1.6Without ISI mark
'25-4-2024 Dual Plate
AS per API 594
25M/s. Durga Valves PVT.LTD., Howrah
Village & Post: Mahiserkha, Tusiberia Road (Near Ideal School), PS: Uluberia, Dist:
Howrah- 711 303 [email protected]
[email protected] [email protected]
Up to 1500 mm
PN-1.6Without ISI mark
'25-4-2024 Dual Plate
AS per API 594
26M/S. Calsens Private
Limited., Kolkata
6/1A British Indian Street, Kolkata- [email protected]
Up to 2000 mm
PN-1.6Without ISI mark
'25-4-2024 Dual Plate
AS per API 594
27M/S. Zoloto Industries.,
Jalandhar
Zoloto House, 11th Mile Stone, Nakodar Road,
Lambra, Jalandhar – [email protected]
40 to 300 mm
PN-1.6Without ISI mark
'25-4-2024 Dual Plate
AS per API 594
28M/S. KETAN
ENGINEERING WORKS , Surendranagar
Plot no. 34, opp. Pramukh Packaging, Nr. Pooja Dhanadal,
S'nagar-Rajkot Highway, Shekhpar, Surendranagar
ketanengiw@yahoo,in
50 to 2000 mm
Up to PN 4.0
Without ISI mark
'25-4-2024 Dual Plate
AS per API 594
29M/S. R & D Multiples (Metal Cast) Pvt. Ltd.
(PLANT-1)
Plant-1, A1/17,GIDC Pardi,Dist.Valsad,Gujarat-396 125
[email protected] [email protected]
50 to 1000 mm
Up to PN 2.5
Without ISI mark
'25-4-2024 Dual Plate
AS per API 594
30M/S. R & D MULTIPES PVT. LTD. (PLANT-2)
Plant-2, Survey No. 304, Balda, Pardi-396125, Dist. Valsad, Gujarat
[email protected] [email protected]
1100 to 2400 mm
Up to PN 2.5
Without ISI mark
'25-4-2024 Dual Plate
AS per API 594
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size &
Approval Valid up to Date
RemarksISI Mark
31M/s. Mahadevi
Industries, Howrah
Salap, NH-6, Domjur, Howrah-711409,
West [email protected]
Up to 2000 mm
PN 1.6Without ISI mark
12/07/2024 Dual Plate
AS per API 594
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.