1

GuruFocus User Manual:

All-in-One Guru Screener

2

Contents

One. All-in-One Guru Screener: Basic Features

1. Introduction and Access

a. Introduction to the All-in-One Guru Screener

b. Accessing the Screener

c. Screener Layout

2. Selecting Filters to Screen for Companies

3. The Predefined Screeners

4. Custom Filters in the All-in-One Screener

5. Saving Custom Screeners

6. The Screener Results Tabs

7. Screener FAQs

Two. Backtesting in the All-in-One Screener

1. Introduction to Backtesting

2. Backtesting Parameters

3. Backtesting Results

4. Backtesting FAQs

Three. Advanced Features in All-in-One Screener

1. Peter Lynch Charts

2. Customized Screener Results Views

3. The Valuation Heat Map

4. Advanced Features FAQs

3

Section One: All-in-One Guru Screener Basic Features

1. Introduction and Overview

As a value investing research platform, GuruFocus tracks the best stock ideas from various sources,

including Peter Lynch, Ben Graham and Warren Buffett. These three legendary investors, unofficially

known as the “Power 3 of Value Investing,” generate value strategies that have outperformed stock

market benchmarks for decades.

This user manual focuses on the “granddaddy of them all,” the All-in-one Guru Screener, which allows

you to screen for companies using more than 150 predefined filters and customized filters.

Introduction to the Screener

As the name suggests, the All-in-One Guru Screener allows you to screen for companies from an eclectic

variety of filters, ranging from profitability filters, valuation filters and guru filters. The Screener contains

over 150 filters as of the writing of this user manual; however, the Customized Filters feature, which we

will discuss later in this manual, boosts the number of filters to about infinity.

Figure 1.1 shows a screen shot of the Screener upon access. At first glance, swarms of drop-down menus

inundate the screen. However, we have organized the filters to facilitate the use of the Screener.

Figure 1.1

Accessing the Screener

GuruFocus offers several ways to access the All-in-one Guru Screener, likely due to its popularity among

users. You can access the Screener by simply clicking the “All-in-One Guru Screener” underneath the

“Screeners” tab. The Screener is the first item under the “Value Screeners” heading as Figure 1.2

illustrates.

4

Figure 1.2

Although discussing every possible way to access the All-in-One Guru Screener is beyond the scope of

this user manual, we can still highlight other key ways to access the Screener. For example, let us

consider the “Search” bar at the top of the Web page, below the blue “GuruFocus” ribbon.

Note the purple arrow pointing to the word “Search” in Figure 1.3.1. You can click here to drop a menu

with two items: “Search” and “Compare.” Suppose we choose “compare” and type in some stock tickers

as illustrated in Figure 1.3.2. Clicking the “go” button takes us to the All-in-One Guru Screener with the

four stock symbols listed in the “Compare” bar reappearing in the “Stocks” filter, located in the top-left

corner of the “Fundamental” tab.

Figure 1.3.1

5

Figure 1.3.2

Screener layout

The All-in-one Guru Screener consists of three parts: the header, the filter box and the results area.

Figure 1.4.1 shows the former two while Figure 1.4.2 shows the third item.

Figure 1.4.1

Figure 1.4.2

The “header” section contains two drop-down menus and the “Global Stock Market” ribbon. The drop-

down menu on the left lists the predefined GuruFocus screens while the drop-down menu on the right

lists your customized screens. Finally, the “Global Stock Market” ribbon allows you to screen for

companies trading in global markets. Click on the check boxes to activate or deactivate the regions.

Clicking on “Show All Countries” pulls down a color-coded list of all countries from the regions as Figure

1.5 illustrates. You can select the specific countries to screen right here.

To save the “Global Stock Market” settings, click on the “Set as Default” button located on the farthest

right of the Global Stock Market ribbon. Unless you change the settings, the Screener results area will

only display the companies in the selected regions / stock exchanges.

6

Figure 1.5

The “Filter box,” which represents the “core” of the Screener, contains hundreds of financial filters

organized in several tabs. The selected filters determine which company stocks populate the “results

area” below the filter box.

7

2. Selecting filters to screen for companies

As illustrated in Figure 1.4.1 above, the All-in-one Screener contains over 150 filters organized into nine

tabs: fundamental, valuation ratio, profitability, growth, valuation rank, price, dividends, gurus and

insiders. Each tab screens for companies based on various value-investing categories. By default, the

Screener displays the “Fundamental” tab.

Brief overview of selecting filters

Each of the drop-down menus allows you to screen for companies based on a specific financial metric.

For each filter, the Screener implements the following layout:

(Financial Metric) (Drop-Down Menu 1) To (Drop-Down Menu 2)

To screen for companies whose revenue is at least a particular value, select the desired value from drop-

down menu 1, the box between the financial metric name and the word “to.” Similarly, you can screen

for companies whose revenue is less than a particular value by selecting the desired value from drop-

down menu 2, the box to the right of “to.”

As you activate filters, red numbers next to each of the tab headings track the number of active filters

underneath each tab as illustrated in Figure 1.6.

Figure 1.6

8

Click the “Reset” button (the farthest button where all the filter tabs are located) to erase all active

filters from the Screener. Then confirm the screener reset by clicking “OK” on the dialog box that

appears.

Fundamental tab

Figure 1.4.1 displays about 65 fundamental filters into five columns. From left to right, the columns

contain the following financial filters:

Column 1 contains the most fundamental filters, including revenue, market cap, enterprise value

(EV), earnings per share, financial strength rank, profitability rank and predictability rank.

Column 2 contains filters on financial strength, including FZM scores, current and Sloan ratios,

interest coverage and other debt ratios.

Column 3 contains filters on profit returns, including return on assets, return on equity, return

on capital and Greenblatt return on capital.

Column 4 contains filters on return on tangible assets / equity, days inventory, days sales

outstanding, days payable, cash conversion cycle and number of good signs / severe warning

signs.

Column 5 contains filters on ownership, share buyback rate, total payout ratio / yield, initial

public offering (IPO) date, in S&P 500 and exclude / include over-the-counter stocks.

Valuation ratio tab

As Figure 1.7.1 illustrates, the “Valuation Ratio” tab allows you to screen for stocks with low valuation

ratios, including the price-earnings ratio, the price-to-sales ratio and the price-to-book ratio. This tab

also contains filters for the Greenblatt earnings yield, the Yacktman forward rate of return and the

margin of safety based on the discounted earnings model.

Figure 1.7.1

Profitability tab

The “Profitability” tab contains filters on profit margins, including the gross margin, operating margin,

net margin, pretax margin and free cash flow margin. Surprisingly, the “Quick Ratio” filter is also

underneath this tab, as illustrated in Figure 1.7.2.

9

Figure 1.7.2

Growth tab

As the name suggests, the “Growth” tab lists filters for several growth rates, including the revenue

growth rate, the EBITDA growth rate, the EPS growth rate, the book growth rate, the debt to revenue

growth rate and the asset growth rate. The tab also filters for the latest quarter EBIT year-over-year

growth and the estimated future EPS growth rate as Figure 1.7.3 illustrates.

Figure 1.7.3

Valuation rank tab

While this tab only has six filters, the “Valuation Rank” tab allows you to screen for companies that have

high or low valuation ratios relative to the industry. We currently support valuation ranks for P/E, P/S

and P/B as of the writing of this user manual. The valuation rank tab filters are summarized in Figure

1.7.4.

10

Figure 1.7.4

Price tab

As Figure 1.7.5 illustrates, the “Price” tab consists of three parts: price and shares outstanding, price

changes and historical price comparisons.

Figure 1.7.5

The first two rows list basic filters pertaining to price and shares outstanding while the next three rows

list filters pertaining to price changes. The final four rows list filters pertaining to price comparisons

based on historical prices and valuations.

Dividend tab

As the name suggests, the “Dividend” tab contains all filters dealing with dividends, including the

dividend yield, the payout ratio and the minimum years of dividend increase. These filters are

summarized in Figure 1.7.6.

11

Figure 1.7.6

Gurus tab

As the name suggests, the “Gurus” tab allows you to screen for companies based on guru ownership and

guru trades. Figure 1.7.7 displays a screen shot of the “Gurus” filter box.

Figure 1.7.7

On the left, you will see a list of gurus and a check box next to each guru. To view the company stocks

owned by a particular guru, click the check box next to the desired guru. While you cannot search for

the guru name, you can click on one of the letters to list all gurus whose first name begins with the

selected letter.

Click on one of the buttons west of the guru list to select all hedge fund gurus, mutual fund gurus, global

gurus or premium gurus. The final button deselects all gurus. You can also select a list of gurus from the

“Choose My Gurus” drop-down menu, which is interconnected with your Personalized Lists of Gurus.

You can screen for guru buys / sells over a specific time frame, current guru ownership, etc. by selecting

the desired values for the drop-down menus on the right.

Insiders tab

The “Insiders” tab allows you to screen for insider cluster buys, CEO buys and CFO buys (and

correspondingly, sells) during a specific time period.

12

For cluster buys and sells, you can screen based on number of insiders. For CEO trades, CFO trades and

all insider trades, you can either screen based on number of shares (left drop-down menu) or total

transaction cost (right drop-down menu). The filters are summarized in Figure 1.7.8.

Figure 1.7.8

Customized tab

As we will explore later in this user manual, the “Customized” tab allows you to screen for companies

based on a user-defined filter formula. This tab effectively increases the number of possible filters from

about 150 to infinity.

13

3. The Predefined Screeners

Since its 2004 inception, GuruFocus generated about 20 predefined screeners, which can be accessed

from the drop-down menu next to “GuruFocus Screens” from the header. While a deep discussion on all

predefined screeners is beyond the scope of this user manual, we can still highlight some of the key

screeners.

Ben Graham’s Lost Formula in 1976

Intelligent investor Ben Graham had more investing strategies than his famous Net-Net Working Capital

strategy. The “Father of Value Investing” also worked on a “nearly finished” magic formula in 1976, as

discussed in the following tutorial article. Some criteria include a trailing 12-month price-earnings ratio

less than 10 and an equity-to-asset ratio of at least 0.5. GuruFocus also limits the companies in non-

cyclical industries and requires a market cap of at least $1 billion.

Screening for high dividend stocks

Income investors can screen for high dividend stocks by activating filters underneath the “Dividends” tab

as shown in Figure 7.6 above. Such companies have a trailing dividend-yield of at least 3%, a three-year

dividend growth rate of at least 10% and a dividend payout ratio less than 0.6.

GuruFocus also provides two predefined screeners on dividend stocks: the dividend income portfolio

and the dividend growth portfolio. The T Rowe Price Equity Income Fund (Trades, Portfolio) primarily

invests in companies with high dividend yields.

Peter Lynch Screeners

Legendary investor Peter Lynch made his way on the GuruFocus Predefined Screeners, which include the

Growth with lower valuation screener, the Lynch-Buffett Screener, the S&L Low-Book Screener and the

Stalwart Screener. Most of these screeners utilize his “earnings line,” i.e., require a P/E (ttm) less than

14.

Predictable Companies Screeners

Several of the predefined screeners utilize the predictability rank filter, including the High Quality

screeners, the “Profitable Predictable Margin Expanders” screener and the “Good Companies” screener.

The companies that make these screeners have consistent per-share revenue growth and EBITDA

growth during the past 10 years.

Several of the “Most Popular Value Screeners,” including the Undervalued Predictable Screener, the

Buffett-Munger Screener and the Historical Low P/S or P/B Screeners require a GuruFocus Predictability

Rank of at least four stars. The following tutorial article discusses how to implement the most popular

screeners, which also include the Ben Graham Net-Net, Walter Schloss Cheap Stock and Peter Lynch

Growth screeners.

“Value Trap” Screeners

14

So far, the above screeners list potential “buy” targets. However, we also have screeners that list

potential “value traps,” including the James Montier Short Screen and the Margin Declining Screen. Such

companies appear to have value, but the declining margins suggest that these companies have higher

bankruptcy potential and low value potential.

GMO fund manager James Montier researched “the dark side” of value investing by looking at

companies with high price-to-sales ratios relative to the industry, a low Piotroski F-score and double-

digit asset growth. While the Montier Short Screen does not directly look for margin decliners,

companies on the Montier screen have high potential for declining margins in the short-term due to

poor business operations.

15

4. Custom filters in the All-in-One Guru Screener

While the Screener has about 150 predefined filters, the “Customized Filters” feature effectively

increases the number of possible filters to infinity. You can create a user-defined filter by typing in the

formula for the filter using the following steps:

1. First, click on the “Customized” tab, which should be the rightmost tab from Figure 1.4.1. Note

that this tab contains the word “new,” which blinks like a flashlight.

2. Scroll down until you see a blue “Create New Filter” button. When you click on this button, you

should see a screen like the one in Figure 1.8.

Figure 1.8

3. The “Edit Filter Formula” pop-up screen contains two parts: a formula box and a “Valid

Parameters” box. As you type in your filter formula, you can select the desired term from the

drop-down menu. You can also click on the desired term from the “Valid Parameters.”

a. Note: Each parameter requires single quotation marks around the term.

b. The site will notify you if your formula input is invalid. Please check that you spelled the

terms correctly.

4. You can name the filter by typing the name in the small box at the top of the screen. Once you

finish typing the filter formula, click on the blue “Save” button to add the filter to your custom

filter list.

16

5. For each custom filter listed, you can select the min / max value or activate it by clicking the

“Activated” check box. The red number next to the “Customized” tab lists the number of active

Custom filters.

6. Each custom filter has its own row. To edit a custom filter, click on the “pencil” icon located in

the desired filter’s row. To delete a custom filter, click on the “X” icon located in the desired

row. The former pops-up Figure 3 with the existing formula in the big box while the latter pops-

up a dialog box confirming the filter delete.

The following tutorial article illustrates how to create a sample “Strong Stocks 2017” screener.

17

5. Saving custom screeners

Once you finish selecting your desired screener filters, you can save the screen by typing the screen

name in the box next to “Save Current Screen.” As illustrated in Figure 1.9, “Save Current Screen

occupies the white strip between the filter box and the “Screener Results” tabs.

Figure 1.9

To access your saved screens, click on the drop-down menu next to “User Defined Screens” in the

header section (See Figure 1.4.1). Click on the desired screen to display that screen’s active filters and

the company stocks matching the criteria.

The “Manage Screens” button next to the “User Defined Screens” drop-down menu pops up a window

like the one shown in Figure 1.10.

Figure 1.10

18

As illustrated in Figure 1.10, the “Manage Screens” pop-up window contains four columns: screen name,

private, email alert and delete. You can click on the “Private” check box to prevent a screener from

appearing on our “User Defined Screens” list. To receive email alerts when new stocks appear on the top

50 screen results (or when stocks disappear from the list), click on the “Email Alert” check box for the

desired screener. Finally, click on the red “X” to delete a screen. Click to confirm the screener delete

when the dialog box appears.

19

6. The “Screener Results” area

As you select filters, the Screener results area populates the companies that meet all of the selected

criteria. Figure 1.11 shows a sample “Screener Results” screen shot.

Figure 1.11

The pink arrow in Figure 1.11 lists the total records in the Screener results. By default, the Screener

results area first displays the “Active Filters” tab. As the name suggests, this tab only lists financial

information for the filters selected in the filter box. You can click on the other tabs in the gray ribbon at

the header of Figure 1.11 to view financial information for a predefined set of filters. The first nine tabs

correspond to tabs in the filter box, while the four tabs to the right of “Active Filters” offer advanced

features within the Screener. For each of the first nine tabs, the Screener results area lists the

companies that match all of the selected criteria and the following financial information (including the

company ticker symbol):

Fundamental tab: the company name, exchange, market cap ($ millions), price, yield, number of

shares (millions), float shares, return on equity, return on assets and the industry. By default,

the Screener lists the companies in ABC order by ticker symbol. Assume this is the case unless

stated otherwise.

Valuation tab: the price, price-book ratio, price-earnings ratio, price-sales ratio, DCF valuations

(FCF based followed by earnings based), Projected FCF. The Screener lists the companies by

increasing P/E ratios by default.

Profitability tab: the company name, price, gross margin, operating margin, pretax margin and

net margin.

Growth tab: the price, and the 1-year, 5-year and 10-year growth rates for revenue, EBITDA,

EPS, Book, Debt to Revenue and Asset.

Price: the price, market cap, stock beta, trade volume, short ratio and other information about

price changes / price changes relative to the Standard & Poor’s 500 index price.

20

Dividend: the company name, price, trailing dividend yield, five-year yield on cost, payout ratio

and five-year dividend growth rate.

Guru Buy / Sell: the guru name, transaction date, action, price average, price change since

action, current price, transaction comments and resultant shares. By default, the guru trades are

listed from newest to oldest.

Insider: the company name, the insider’s position / name, the transaction date, transaction

details and the current share price. By default, the insider trades are listed from newest to

oldest.

Guru Consensus: the company name, number of shares outstanding, market cap ($ millions),

number of guru owners and information about the company’s top guru holder. By default, the

Screener lists the company stocks by decreasing number of guru owners and excludes

companies with zero guru owners.

Premium members have the option to customize the Screener Results area by clicking on the

“Customized” tab between the “Peter Lynch Charts” and “Valuation Map” tabs. Note that this tab is

different from the “Customized” tab in the filter box above. We will discuss this further in the “Advanced

Features” section later in the user manual.

21

7. All-in-One Screener FAQs

Do I need a Premium membership to use the All-in-One Guru Screener?

o To have full access of the All-in-One Guru Screener, you do need Premium membership.

o Note the blurred lines as you attempt to use the Screener. Clicking on one of these

blurred lines will either direct you to the “membership upgrade” screen or the “Home”

screen. If you see the former page, we encourage you to go ahead and sign up for a free

seven-day trial of Premium membership.

Can I screen for technical indicators, like the relative strength index or the simple moving

average?

o Sorry, but as of the writing of this user manual, we do not support technical indicators in

the All-in-One Guru Screener.

o Please select one of the stocks listed in the Screener results area and go to the

Interactive Charts page. You can view the technical indicators there.

What can I do if I cannot find a particular screener filter?

o Please select the “Customized” tab in the filter box and click on the “Create New Filter”

button.

o Then follow the steps illustrated in Section 4, “Creating Custom Filters in the All-in-One

Screener.”

What does the “From Home Exchange” filter do?

o The “From Home Exchange” filter limits the companies to those trading from their home

exchange, e.g., it will only show Apple (AAPL) if you select the USA region.

Is there a way I can show companies that do not meet all of the selected criteria in the Screener,

in addition to the companies listed?

o Yes. If you look closely at the Screener Results area, you should see the words “Compare

the results with these stocks,” and a white box.

o You can type the ticker symbols you want to compare into the white box.

o For example, let us consider the “Strong Stocks 2017” Screener that we discuss in the

tutorial article. We can compare these results to other companies, like AAPL, IBM and

WMT. Figure 1.12 shows a screen shot of the output:

o o Figure 1.12

22

o The yellow bars in Figure 1.12 indicate that these company stocks do not meet all of the

above criteria and are not included in the “total records” count. For example, the three

stocks we compared do not have a GuruFocus Predictability Rank of four stars or higher,

one of the key filters for the “Strong Stocks 2017” Screener.

Can I download the screener records to Excel?

o Only Premium members can download screener records to Excel. To download the

Screener records to Excel, click on the “XLS Download” link

o Additionally, Premium members can download just the top 1000 records from the

Screener.

o If you want to download up to 5000 records, you need to upgrade to Premium Plus.

How can I exclude industries from the Screener?

o If you click on the button next to “Industry” under the “Fundamental” tab, you will see a

drop-down menu listing all of the industries, as illustrated in Figure 1.13.

o o Figure 1.13

o Consider the pink oval in Figure 1.13. If you select the “Exclude” option, you can select

the industries / sectors you want to exclude from the Screener.

o You can also select or unselect all industries by clicking the “Select/Unselect All” link.

o Similarly, you can also exclude certain companies by tying the stocks to exclude in the

white box after “Stocks” and click on the “Exclude” checkbox between the white box

and the “Go” button.

Can I screen for warning signs?

o Yes. On the “Fundamental” tab, you will see two filters, “Good Signs” and “Warning

Signs.” These two filters are located immediately above “Financial Statement Type” as

Figure 1.14 illustrates.

o o Figure 1.14

o Note: The “Warning Signs” filter applies to the “Severe Warning Signs.” To screen for

“Medium Warning Signs,” please go to Customized Filters and type in ‘Number of

Median Warning Signs’ in the formula box. You can also add a criterion, e.g.

23

o ‘Number of Median Warning Signs’ < 5

o NOTE: Although you can screen for warning signs and good signs, you cannot backtest

on these parameters as of the writing of this user manual. Please try backtesting these

through custom filters.

Why do you show user generated screeners on the home page and on the initial Screener page?

o As “good minds think alike,” the GuruFocus community can share value investing ideas

among themselves. If you have good stock ideas, we can benefit from them if you are

willing to share them with us.

o If you do not want to share your stock ideas, you can set your user defined screener to

“Private” by clicking the “Private” check box next to the “Save” button in the white

“Save Current Screen” strip.

o You can also change the privacy settings for your screeners through “Manage Screens.”

Please refer to Figure 1.10 (Pages 17 and 18 of the user manual) for information on

managing your custom screens.

Section One ends here.

24

Section Two: Backtesting in All-in-One Guru Screener

1. Introduction to Backtesting

Once you create a user-defined investing strategy from the All-in-One Screener, you may want to

“backtest” the strategy and determine the strategy’s outperformance relative to the Standard & Poor’s

500 index exchange-traded fund. You can now backtest your user-defined strategies through GuruFocus.

During June 2016, GuruFocus launched the backtesting feature in the Screener, free of “survival bias

caused by the historical mergers, acquisitions, spin-offs and delisting” as discussed in the new feature

announcement. This section of the user manual will detail the backtesting feature and how to analyze

the results.

Backtesting Preliminaries

Before you can run backtesting, please choose the Screener filters that match your investing strategy.

Section one of this user manual details how to screen for companies. Once you finish selecting the

desired filter criteria, click on the “Backtesting” tab among the tabs located in the Screener Results area.

This tab is located immediately to the right of the “Active Filters” tab, as Figure 1.11 illustrates.

Once you click on the “Backtesting” tab, you should see a screen like the one shown in Figure 2.1.

Figure 2.1

Note the large white space in Figure 2.1. Once you run backtesting, the white space will display two

charts that we will discuss further.

25

2. Backtesting Parameters

As illustrated in Figure 2.2, the backtesting feature requires several parameters, including the initial

screen date, the rebalance frequency, the maximum number of stocks in the test portfolio and the

financial metric used to rank the company stocks.

Figure 2.2

Screen Date

The “Screen Date” parameter sets the initial date of the backtesting. In the drop-down menu next to

“Screen Date,” select the desired first month of the backtesting period.

Rebalance Frequency

The “Rebalance Frequency” parameter determines how often Backtesting should rebalance your test

portfolio, i.e., close out the current holdings and allocate the proceeds equally to the top-ranked

company stocks at the time of rebalance. You can rebalance your portfolio every three months, six

months or 12 months. You can also choose to “buy and hold,” i.e., not rebalance the test portfolio at all.

Rank by

The “Rank by” parameter controls which financial metric should Backtesting rank your company stocks

by. You can choose the desired parameter from the active filters selected, and then you can rank the

company stocks in ascending order (ASC) or descending order (DESC) based on the selected financial

metric.

Number of Stocks

The “# of Stocks” parameter determines the maximum number of stocks in the test portfolio. You can

choose to have five, 10, 20, 30, 40 or 50 stocks in your portfolio. Backtesting determines which company

stocks to list in the results tab based on the “Rank by” and “# of Stocks” parameters.

Initial Investment Amount

Although the “Initial Investment Amount” does not directly affect backtesting, you can set your initial

investment amount for your test portfolio. By default, the initial investment amount is $1 million.

26

3. Backtesting Results

Once you finishing setting the backtesting parameters, click on the blue “Backtesting” button to run the

backtesting. You will see two charts once the backtesting finishes. Figure 2.3 shows a sample backtesting

output.

Figure 2.3

Chart 1 graphs the model portfolio’s performance relative to three exchange-traded funds: the Standard

& Poor’s 500 index, the Dow Jones industrial average and the Nasdaq. Chart 2, the one below Chart 1,

graphs the portfolio value during the backtesting period. The final value of the portfolio value depends

on the initial investment amount entered.

If you scroll down, you should see two sections: Performance and Annual Performance. The former lists

the portfolio gains over a certain time period while the latter lists the portfolio gains for each year

during the backtesting period. Figure 2.4 shows a sample “Performance” table while Figure 2.5 shows a

sample “Annual Performance” table.

Figure 2.4

27

Figure 2.5

To see the stocks in the model portfolio, click on the Results tab, the lower of the two tabs west of the

Charts. By default, Backtesting lists the initial companies in the model portfolio as Figure 2.6 illustrates.

You can view the companies in the model portfolio during a particular rebalancing period by clicking the

respective tab.

Figure 2.6

28

4. Backtesting FAQs

Do I need Premium membership to run backtesting?

o Yes. (This is the likely reason why Backtesting is highlighted in orange.)

o Furthermore, Premium members can only backtest up to three years. As of the writing

of this user manual, Premium members can use any initial screen date after 2014-01.

o You need to upgrade to Premium Plus membership to backtest beyond three years.

Premium Plus members can backtest all the way to 2006-01, the first month we have

backtesting data.

When I run backtesting, I noticed that gurus and insider filters become deactivated. Why does

this occur?

o As mentioned in the June 2016 new feature announcement, we only have the first

release of the Backtesting manual.

o Filters on valuation rank, gurus and insiders are not supported. However, we do support

custom filters in Backtesting.

Can I backtest companies in Europe or U.K.?

o We only support backtesting for U.S. companies as of the writing of this user manual.

Sorry about that.

o Why? Since we want backtesting to be free of survival bias, we include all historical

mergers, acquisitions, spin-offs and delisting in the backtest. In order to show

backtesting results for global companies, we will need “high quality” fundamental data

for delisted companies in global markets.

I see an asterisk between the two drop-down menus for the “Rank By” parameter. What does

the asterisk mean?

o The asterisk reminds you that you need to choose an active financial filter for the

backtesting. You will see the following warning message similar to the one in Figure 2.7

if you leave the “Rank By” parameter blank:

o Figure 2.7

Section Two ends here.

29

Section Three: Advanced Features in All-in-One Guru Screener

1. Peter Lynch Charts in All-in-One Screener

As the name suggests, you can click on the Peter Lynch Charts tab to view the Peter Lynch chart for all

companies listed in the records. You can view the companies three at a time. For each Peter Lynch chart,

you can graph the historical price and earnings line for the year to date, the past 12 months, the past

three years, the past five years, the past 10 years or all historical years. You can also save the charts or

embed them in your articles.

2. Customized views in All-in-One Screener

In Section One above, we discussed the tabs to the left of the “Backtesting” tab and the financial metrics

discussed on each tab. As a GuruFocus Premium member, you can customize the Screener Results area

by first clicking on the “Customized” tab located two tabs to the right of “Backtesting,” and then clicking

the “Customize View” icon as illustrated in Figure 3.1.

Figure 3.1

By default, the Customized view lists the symbol, company, price, predictability rank, market cap and

price-earnings ratio for the companies meeting all selected criteria. The “Customized View” feature

allows you to select which financial metrics you want to view in the Screener Results area. Figure 3.2

shows a portion of the “Customized view financial metric selection box.”

30

Figure 3.2

The “Custom View Financial Metric Selection Box” lists over 500 financial metrics into nine categories:

fundamental, valuation ratio, profitability, growth, price, dividends, income statement, balance sheet

and cash flow statement. The first six categories correspond to the filter tabs discussed in Section One

while the latter three list financial information from the accounting statements. Once you finish

selecting all of the desired filters (you may need to scroll up and down the page), scroll down to the

bottom where you should see a blue “Save View” button. Click on the “Save View” button to save the

custom view.

You can also download the custom view to Excel by clicking on the CSV or Excel button underneath the

“Customize View” icon.

Note: If you are not a Premium member, you may see blurred lines underneath the “Symbol” and

“Company” headers. Clicking on the blurred lines will take you to our “membership upgrade” page,

where you can sign up for a free seven-day trial of GuruFocus.

31

3. The Valuation Heat Map in All-in-One Screener

As the name suggests, the Valuation Map allows you to visualize the relative valuations of companies

within a specific industry. Figure 3.3 shows a sample Valuation Heat Map.

Figure 3.3

Valuation Heat Map Layout

The Valuation Heat Map can graph the relative value of one financial metric at a time. You can select

this valuation metric among the drop-down menus located below the “Total Records” counter at the

top-left corner of the Screener Results area. The available financial metrics are grouped into six drop-

down menus: valuation ratio, price, fundamental, profitability, growth and dividends. The selected

financial metric is highlighted in yellow, e.g., the Map in Figure 3.3 color codes the regions based on the

companies’ trailing 12 month price-earnings ratio (P/E (ttm)).

Like a floor plan, the Valuation Heat Map arranges the Screener results based on industry and sector.

Each of the companies occupies one region on the Map, and the Map color codes the regions based on

the relative value of the selected financial metric.

Note the “Relative Value Bar” in the bottom-left corner of Figure 3.3. Based on this color-coded bar, you

can find the range of the financial metric for each company listed on the valuation map. For example, in

32

Figure 3.3 above, dark green indicates that the company’s P/E (ttm) is between 10.0 and 16.0. Likewise,

black indicates that the company’s P/E (ttm) is between 16.0 and 31.3, i.e., near the median P/E (ttm).

How is the Valuation Heat Map useful?

With the Valuation Heat Map, you can narrow your stock picks to the companies that have higher value

potential than other companies in the Screener Results. Suppose you generated a screen based on an

investing strategy, but the Screener results show about 20 to 30 companies. To narrow the search

results, you could add additional filters as illustrated in Section One. Alternatively, you can find good

investing opportunities from the 30 stocks in the results area using Valuation Maps.

33

All-in-One Screener Manual: Conclusions

The All-in-One Guru Screener is one of the most popular features that GuruFocus provides to its

Premium members. Although every detail of the Screener is beyond the scope of the user manual, this

user manual detailed the Screener Basics, the Backtesting Feature and several other advanced features.

If you are not a Premium member of GuruFocus, you will see a warning message similar to the one

shown in Figure 4 throughout the Screener.

Figure 4

Please click on the orange link to sign up for a free seven-day trial of our Premium Membership, which

gives you full access to the All-in-one Guru Screener and much more. The link is also listed below:

https://www.gurufocus.com/membership/upgrade.php?ref=screener