halliburton and falckus.falck.com/en/safetyservices/documents/well control.pdf · • wellcap -...
TRANSCRIPT
For more information contact:
Shayne Braig Well Control Manager Tel +1.281.281.630.4148Email [email protected]
+ 1.866.404.9564 www.falck.com/us
Well Control
Matthew VorenkampNational SalesTel +1.281.686.8399Email [email protected]
Courses offered:
• WellSharp Introductory (Instructor Led)• WellSharp - Drilling Surface Only (Driller and Supervisor)• WellSharp - Drilling Surface & Subsea (Driller and Supervisor)• WellSharp - Drilling Workover / Completion Surface Only (Driller and Supervisor)• WellSharp - Drilling Workover / Completion Surface & Subsea (Driller and Supervisor)• WellCap - Workover Completion Surface Only (Fundamental and Supervisor)• WellCap - Workover / Coil Tubing / Snubbing / Wireline Surface Only (Fundamental and Supervisor)
Online Courses• Introduction to Drilling• IADC Well Sharp Drilling & Well Control - Introductory• IWCF Level 2
Course Objectives:
Boots & Coots, a Halliburton Service, and Falck Safety Services have formed a strategic alliance to offer well control services and well control training globally. Falck will deliver the training portion and Boots & Coots will continue to deliver their known full suite of well control services. The two companies were looking for the best in the market to complement their individual portion of services in the Well Control market. This alliance allows both companies to jointly develop market, sell, and deliver their well control services and training to the oil and gas industry.
• Abnormal Pressure Warning Signs• Ballooning Issues• Barriers• BOP Closing Unit and Control Panels• BOP Stack• Calculations• Casing & Cementing Considerations and Operations• Causes and detection• Choke and Kill Line Friction and Fluid Densities• Coiled tubing operations and equipment• Complications and solutions• Deadman• Differences and Float in String• Displacing Riser Post Kill• Diverter• Downhole Pressure and Temperature Effects• Drillers Method• Drilling and Tripping• Drilling, Workover & Completion Plan - Awareness• Emergency Disconnect System and Procedures• Equipment• Equivalent Circulating Density and Bottomhole Pressure• Extract of Subsea Elements• Flow Returns Rate Increase• Gas characteristics and behavior• Government and industry standards and regulations• Handling Gas In The Riser• Hands-on simulation exercises will be conducted• Hang Off Drill• Hydraulic Workover equipment and (snubbing) operations• Kick Prevention during Drilling, Casing & Cementing Operations
• Mud & Pit Management• Organizing a well kill operation• Post Shut-In Monitoring & Activities• Practical Elements - Optional• Pre-Recorded Data• Procedures for shut-in and determining pressures• Pump Startup and Shutdown• Recording Shut In Pressures• Riser Disconnect and Riser Gas• Riser Flow After Shut In• Riser Gas Handling Equipment• Riser Margin• Risk Management• ROV Hot Stab Capability• Running Casing/Cementing• Shallow Gas, Water Flows & Tophole Drilling• Shallow Subsea and Fracture Gradients• Shut In Monitoring, Procedures and Verification • Stack Glass Clearing Procedure• Stack Valves and Wellhead Components• Techniques for killing a producing well• Trapped Gas at BOP• Wait and Weight Method• Well Control Concepts• Well Control Drills• Well Control Methods• Well Control Practice with Simulators• Well Flow With Pumps Off• Wire line operations• Workover and completion fundamentals