handbook 2022 - usq.edu.au
TRANSCRIPT
International Standard Serial NumberISSN 1037-1818
Handbook 2022
Engineering and Built Environment
The information contained in this Handbook is valid as at the date mentioned below. The University of Southern Queensland reservesthe right not to offer any program or course and to decline the enrolment of students in a program or course, in the light of studentdemand and resource constraints. Program structures, course objectives and content are subject to amendment as circumstancesdictate.
The most up-to-date version of the USQ Handbook is the electronic version at http://www.usq.edu.au/handbook/current/. Anyprinted version or other saved electronic version will be up to date at the time of printing or saving but may not contain the mostrecent information. Please always refer to the Internet address provided.
This version produced 21 Apr 2022.
TheUniversity of
SouthernQueensland
Postal address:The University of Southern
QueenslandToowoomba QLD 4350
Australia
Telephone + 61 7 4631 2100
www.usq.edu.au
ABN: 40 234 732 081
Programs
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV120812© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.
Undergraduate programs
Undergraduate Certificate of Engineering Fundamentals (UCCE)- UCertEngFun
Online
Semester 1 (February)Semester 2 (July)
Start:
Commonwealth supported placeFees:
0.5 year full-timeStandard duration:
To: Diploma of University Studies; Associate Degree of Engineering; Bachelor ofEngineering Science; Bachelor of Engineering (Honours)
Programarticulation:
Contact us
Current studentsFuture Australian and New Zealand students
Ask a questionFreecall (within Australia): 1800 007 252Phone (from outside Australia): +61 7 4631 2285Email [email protected]
Ask a questionFreecall (within Australia): 1800 269 500Phone (from outside Australia): +61 7 4631 5315Email: [email protected]
Program aimsThis program is designed for people interested in pursuing a career in engineering. Students will buildknowledge across engineering systems including foundational concepts in engineering, engineering design,engineering materials and mathematics.
Program objectivesOn completion of this program graduates should be able to:
● utilise foundation knowledge, skills and competencies in engineering● reflect on the nature of award-level study● use effective communication and interpersonal skills
Australian Qualifications FrameworkThe Australian Qualifications Framework (AQF) is a single national, comprehensive system of qualificationsoffered by higher education institutions (including universities), vocational education and training institutionsand secondary schools. Each AQF qualification has a set of descriptors which define the type and complexityof knowledge, skills and application of knowledge and skills that a graduate who has been awarded thatqualification has attained, and the typical volume of learning associated with that qualification type.
This program is at AQF Qualification Level 05. Graduates at this level will have specialised knowledge andskills for skilled/paraprofessional work and/or further learning.
The full set of levels criteria and qualification type descriptors can be found by visiting www.aqf.edu.au.
Program Information SetView USQ’s admission criteria, student profiles and a summary of all offers made under Course AdmissionInformation Set via the QTAC website.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV120813© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Undergraduate Certificate of Engineering Fundamentals (UCCE) - UCertEngFun (2022)
Admission requirementsTo be eligible for admission, applicants must satisfy the following requirements:
● Admission into this short program is available to eligible Commonwealth Supported applicants, who areaged 17 years or over. USQ assumes your knowledge is equivalent to senior high school English (Units3 & 4, C).
Program fees
Commonwealth supported placeA Commonwealth supported place is where the Australian Government makes a contribution towards the costof a students' higher education and students pay a student contribution amount, which varies depending onthe courses undertaken. Students are able to calculate the fees for a particular course via the Course FeeSchedules.
Commonwealth Supported students may be eligible to defer their fees through a Government loan calledHECS-HELP.
Program structureStudents must successfully complete four compulsory core courses before they are able to graduate with theUndergraduate Certificate of Engineering Fundamentals.
Required time limitsStudents have a maximum of 1 year to complete this program.
Core coursesThere are four compulsory courses:
● ENG1002 Introduction to Engineering and Built Environment Applications● ENG1100 Introduction to Engineering Design● MEC1201 Engineering Materials● DIP1003 Essential Mathematics OR ENM1500 Introductory Engineering Mathematics#
Enrolment involves the completion of an online diagnostic test to determine the appropriate mathematics course#
IT requirementsAccess to an up-to-date computer is necessary. On-campus students can access appropriately equippedlaboratories, but should consider acquisition of their own computer. Students should be able to access acomputer with the following minimum standards. All students should have access to email and the Internetvia a computer running the latest versions of Internet web browsers such as Internet Explorer or Firefox. TheUniversity has a wireless network for on-campus students' computers. In order to take advantage of this facilityand further enhance their on-campus learning environment, students should consider purchasing anotebook/laptop computer with wireless connectivity. Specialist software is required for some courses.
ArticulationSuccessful completion of this program will enable four courses of credit towards the Diploma of UniversityStudies. It will also provide entry to, and up to four courses credit towards the Associate Degree of Engineeringand enable students to progress to the Bachelor of Engineering Science or Bachelor of Engineering (Honours)in a range of engineering specialisations.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV120814© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Undergraduate Certificate of Engineering Fundamentals (UCCE) - UCertEngFun (2022)
Recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Enrolment requirementsYear of program and semester in which courseis normally studied
Course
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
1,21ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,21ENG1100 Introduction to Engineering Design1,2,31MEC1201 Engineering Materials
Choose one of the following two courses:
1,2,31DIP1003 Essential Mathematics#
1,2,31ENM1500 Introductory Engineering Mathematics#
FootnotesEnrolment involves the completion of an online diagnostic test to determine the appropriate mathematics course#
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV120815© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Undergraduate Certificate of Engineering Fundamentals (UCCE) - UCertEngFun (2022)
Undergraduate Certificate of Spatial Science Fundamentals(UCCS) - UCertSpatScFun
Online
Semester 1 (February)Semester 2 (July)
Start:
Commonwealth supported placeFees:
0.5 year full-timeStandard duration:
To: Diploma of University Studies; Associate Degree of Spatial Science; Bachelor ofSpatial Science Technology; Bachelor of Spatial Science (Honours)
Programarticulation:
Contact us
Current studentsFuture Australian and New Zealand students
Ask a questionFreecall (within Australia): 1800 007 252Phone (from outside Australia): +61 7 4631 2285Email [email protected]
Ask a questionFreecall (within Australia): 1800 269 500Phone (from outside Australia): +61 7 4631 5315Email: [email protected]
Program aimsThis program is designed for people interested in pursuing a career as a surveyor or geospatial scientist.Students will build foundational knowledge across the broader discipline skills of surveying, digital mapping,satellite positioning, problem solving and mathematics.
Program objectivesOn successful completion of this program graduates should be able to:
● utilise foundation knowledge, skills and competencies in engineering● reflect on the nature of award-level study● use effective communication and interpersonal skills
Australian Qualifications FrameworkThe Australian Qualifications Framework (AQF) is a single national, comprehensive system of qualificationsoffered by higher education institutions (including universities), vocational education and training institutionsand secondary schools. Each AQF qualification has a set of descriptors which define the type and complexityof knowledge, skills and application of knowledge and skills that a graduate who has been awarded thatqualification has attained, and the typical volume of learning associated with that qualification type.
This program is at AQF Qualification Level 05. Graduates at this level will have specialised knowledge andskills for skilled/paraprofessional work and/or further learning.
The full set of levels criteria and qualification type descriptors can be found by visiting www.aqf.edu.au.
Program Information SetView USQ’s admission criteria, student profiles and a summary of all offers made under Course AdmissionInformation Set via the QTAC website.
Admission requirementsTo be eligible for admission, applicants must satisfy the following requirements:
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV120816© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Undergraduate Certificate of Spatial Science Fundamentals (UCCS) - UCertSpatScFun (2022)
● Admission into this short program is available to eligible Commonwealth Supported applicants, who areaged 17 years or over. USQ assumes your knowledge is equivalent to senior high school English (Units3 & 4, C).
Program fees
Commonwealth supported placeA Commonwealth supported place is where the Australian Government makes a contribution towards the costof a students' higher education and students pay a student contribution amount, which varies depending onthe courses undertaken. Students are able to calculate the fees for a particular course via the Course FeeSchedules.
Commonwealth Supported students may be eligible to defer their fees through a Government loan calledHECS-HELP.
Program structureStudents must successfully complete four compulsory core courses before they are able to graduate with theUndergraduate Certificate of Spatial Science Fundamentals.
Required time limitsStudents have a maximum of 1 year to complete this program.
Core coursesThere are four compulsory courses:
● ENG1002 Introduction to Engineering and Built Environment Applications● GIS1401 Geographic Data Presentation OR GIS1402 Geographic Information Systems● SVY1110 Introduction to Global Positioning System OR SVY1102 Surveying A● DIP1003 Essential Mathematics OR ENM1500 Introductory Engineering Mathematics#
Enrolment involves the completion of an online diagnostic test to determine the appropriate mathematics course#
IT requirementsAccess to an up-to-date computer is necessary. On-campus students can access appropriately equippedlaboratories, but should consider acquisition of their own computer. Students should be able to access acomputer with the following minimum standards. All students should have access to email and the Internetvia a computer running the latest versions of Internet web browsers such as Internet Explorer or Firefox. TheUniversity has a wireless network for on-campus students' computers. In order to take advantage of this facilityand further enhance their on-campus learning environment, students should consider purchasing anotebook/laptop computer with wireless connectivity. Specialist software is required for some courses.
ArticulationSuccessful completion of this program will enable four courses of credit towards the Diploma of UniversityStudies. It will also provide entry to, and up to four courses credit towards the Associate Degree of SpatialScience and enable students to progress to the Bachelor of Spatial Science Technology or Bachelor of SpatialScience (Honours).
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV120817© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Undergraduate Certificate of Spatial Science Fundamentals (UCCS) - UCertSpatScFun (2022)
Recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Enrolment requirementsYear of program and semester in which courseis normally studied
Course
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
1,21ENG1002 Introduction to Engineering and BuiltEnvironment Applications
Choose one of the following two courses:
1,31GIS1402 Geographic Information Systems21GIS1401 Geographic Data Presentation
Choose one of the following two courses:
11SVY1102 Surveying A21SVY1110 Introduction to Global Positioning System
Choose one of the following two courses:
1,2,31DIP1003 Essential Mathematics#
1,2,31ENM1500 Introductory Engineering Mathematics#
FootnotesEnrolment involves the completion of an online diagnostic test to determine the appropriate mathematics course#
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV120818© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Undergraduate Certificate of Spatial Science Fundamentals (UCCS) - UCertSpatScFun (2022)
Diploma of Engineering and Spatial Science Foundations (DESF)- DipESSFThis program is offered only to continuing students. No new admissions will be accepted. Students who areinterested in this study area should consider the FDUS Foundation Diploma of University Studies which willbe offered from Semester 2, 2016.
Online #
No new admissionsStart:
Commonwealth supported placeFees:Domestic full fee paying placeInternational full fee paying place
1 year full-time, 3 years part-timeStandard duration:
To: Associate Degree of Engineering, ; Associate Degree of Spatial Science,Programarticulation:
Notes:
Details of the Engineering and Spatial Science on-campus and distance mode offerings can be obtained from undergraduate Engineering programs.
FootnotesThe first four courses are compulsory and are only available online.#
Contact us
Current students
Ask a questionFreecall (within Australia): 1800 007 252Phone (from outside Australia): +61 7 4631 2285Email [email protected]
Program aimsThe principal aim of this program is to equip students with the necessary skills to successfully respond to thenumeracy, literacy, and e-literacy demands of both higher education studies and the professional workplace,as well as assisting students to successfully manage the complexities of life/work balance. The diplomaprogram provides students with a broad introduction to engineering and spatial science as a science andprofession, and the concepts of systems and real world teamwork. Problem solving skills, and advancedmathematical and physics competencies are developed and the program will appeal to those who want toenhance and develop their broad study skills prior to sampling a range of engineering and spatial sciencecourses in order to determine whether to embark on a more specialised associate degree program from theFaculty of Health, Engineering and Sciences.
Program objectivesOn the successful completion of the Diploma of Engineering and Spatial Science Foundations graduates willhave:
● demonstrated an ability to successfully pursue an associate degree program of study in the Faculty ofHealth, Engineering and Sciences
● acquired sufficient knowledge about engineering and surveying programs of study to make an informedchoice about further undergraduate study in the Faculty of Health, Engineering and Sciences
● developed an enhanced awareness of the nature of study in the Faculty of Health, Engineering and Sciences● developed foundation engineering knowledge, skills and competencies in a series of first year engineering
degree courses
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV120819© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Diploma of Engineering and Spatial Science Foundations (DESF) - DipESSF (2022)
Admission requirementsTo be eligible for admission, applicants must satisfy the following requirements:
There is no specified minimum educational achievement entrance standard.
Normally, to be eligible for enrolment in the program a person will have attained an age of at least 18 yearsin the year of the proposed enrolment.
Students will need to complete the online application form for entry to the Diploma Programs. All applicantsare required to complete online diagnostic tests in Mathematics, e-literacy, and English Communication Skills.Applicants will then be given advice detailing whether the Diploma Program is the most appropriate pathwayfor them to undertake. Some students may be advised to undertake the Tertiary Preparation Program .
All students are required to satisfy the applicable English language requirements.
If students do not meet the English language requirements they may apply to study a University-approvedEnglish language program. On successful completion of the English language program, students may beadmitted to an award program.
Program fees
Commonwealth supported placeA Commonwealth supported place is where the Australian Government makes a contribution towards the costof a students' higher education and students pay a student contribution amount, which varies depending onthe courses undertaken. Students are able to calculate the fees for a particular course via the Course FeeSchedules.
Commonwealth Supported students may be eligible to defer their fees through a Government loan calledHECS-HELP.
Domestic full fee paying placeDomestic full fee paying places are funded entirely through the full fees paid by the student. Full fees varydepending on the courses that are taken. Students are able to calculate the fees for a particular course via theCourse Fee Schedule
Domestic full fee paying students may be eligible to defer their fees through a Government loan called FEE-HELP provided they meet the residency and citizenship requirements.
Australian citizens, Permanent Humanitarian Visa holders, Permanent Resident visa holders and New Zealandcitizens who will be resident outside Australia for the duration of their program pay full tuition fees and arenot eligible for FEE-Help.
International full fee paying placeInternational students pay full fees. Full fees vary depending on the courses that are taken and whether theyare studied on-campus, via distance education/online. Students are able to calculate the fees for a particularcourse via the Course Fee Schedules.
Program structureThis program consists of four core courses followed by four courses of specialisation in Engineering and/orSpatial Science. Students must successfully complete the four core courses before they will be enrolled in thefour courses of specialisation.
Core courses
There are four compulsory courses:
● DIP1000 E-Literacy for Contemporary Society● DIP1001 Academic and Professional English● DIP1002 Strategies for Successful Study● DIP1003 Essential Mathematics
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208110© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Diploma of Engineering and Spatial Science Foundations (DESF) - DipESSF (2022)
DIP1000 E-Literacy for Contemporary Society and DIP1002 Strategies for Successful Study are co-requisites:they must be studied together, and they must be the first courses undertaken.
For part-time students, DIP1001 Academic and Professional English and DIP1003 Essential Mathematicsmust be studied after DIP1000 and DIP1002. All four courses can be taken in a single semester for thosepursuing full-time studies.
Foundation Studies in Engineering and Spatial Sciences courses
After completing the four compulsory courses students can select four courses from the following selection:
● CIV1500 Applied Mechanics● ENG1002 Introduction to Engineering and Built Environment Applications● ENG1101● ENM1500 Introductory Engineering Mathematics● ENG1100 Introduction to Engineering Design● SVY1500 Spatial Science for Engineers● MEC1201 Engineering Materials● SVY1110 Introduction to Global Positioning System
To maximise future credit and articulation into an Associate Degree program in the Faculty of Health,Engineering and Sciences, students should choose courses that are relevant to that Associate Degree program.
Program completion requirementsTo successfully complete the Diploma of Engineering and Spatial Science Foundations students mustsuccessfully complete the four compulsory core courses, and also four courses of specialisation.
Required time limitsStudents have a maximum of three years to complete this program.
IT requirementsStudents must have reliable and ready access to email and the Internet. Broadband access is required for thefour compulsory core courses. Students should have access to a scanner for DIP1003 Essential Mathematics.For information technology requirements, please see the minimum computing standards.
Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Students undertaking the Diploma of Engineering and Spatial Science Foundations must complete the fourcompulsory courses first. The recommended enrolment pattern is as follows:
Enrolment requirementsYear of program and semester in which courseis normally studied
Course
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
1,2,31DIP1000 E-Literacy for Contemporary Society1,2,31DIP1001 Academic and Professional English1,2,31DIP1002 Strategies for Successful Study1,2,31DIP1003 Essential Mathematics
Plus the four Engineering and Spatial Science courses referred to in the Program Structure.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208111© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Diploma of Engineering and Spatial Science Foundations (DESF) - DipESSF (2022)
Associate Degree of Construction (ADCN) - ADegConstructionQTAC code (Australian and New Zealand applicants): External: 907075; Springfield campus: 927071
CRICOS code (International applicants): 089495C
This program is currently undergoing internal reaccreditation. This may result in changes to theprogram for 2022.
ExternalOn-campus
Semester 1 (February)Semester 2 (July)
Semester 1 (February)Semester 2 (July)
Start:
-SpringfieldCampus:
Commonwealth supported placeCommonwealth supported placeFees:Domestic full fee paying placeDomestic full fee paying placeInternational full fee paying placeInternational full fee paying place
2 years full-time, 4 years part-timeStandard duration:
To: Bachelor of Construction (Honours)Programarticulation:
Contact us
Current studentsFuture International studentsFuture Australian and NewZealand students
Ask a questionFreecall (within Australia): 1800007 252Phone (from outside Australia): +617 4631 2285Email [email protected]
Ask a questionPhone: +61 7 4631 5543Email: [email protected]
Ask a questionFreecall (within Australia): 1800269 500Phone (from outside Australia): +617 4631 5315Email: [email protected]
Professional accreditationGraduates of the Associate Degree of Construction meet the Queensland Building and ConstructionCommission’s technical qualification requirements to hold a Builder Open class of licence and a BuilderProject Management Services licence subject to demonstrating the required level of industry experience.
Program aimsThe program aims to produce para-professional standard graduates for entry level management positions inthe building and construction industry who have a broad range of relevant technical skills and well developedskills in communication and team work.
The program is designed to capitalise on growing demand for this level of expertise on construction projectsand the program's primary aims are to:
● enable graduates to attain a diverse range of practical skills and competence to successfully coordinateand supervise a wide range of construction processes;
● develop skills in planning, monitoring and controlling the technical and logistical aspects associated withbuilding and construction projects;
● take an active role in planning, managing and organising people and other resources on constructionprojects in the built environment to support other construction management professionals.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208112© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Construction (ADCN) - ADegConstruction (2022)
Program objectivesAt the completion of the program the graduate will be able to.
● apply building principles and methods;● prepare documentation for building development and construction;● liaise with other members of the building team, clients and other external stakeholders;● apply relevant legislation and technical standards at the appropriate level in building construction;● accept a level of responsibility for the practical and logistical aspects of the human relations, resources,
scheduling, quality control, environmental factors and social impacts involved in a building project.
Australian Qualifications FrameworkThe Australian Qualifications Framework (AQF) is a single national, comprehensive system of qualificationsoffered by higher education institutions (including universities), vocational education and training institutionsand secondary schools. Each AQF qualification has a set of descriptors which define the type and complexityof knowledge, skills and application of knowledge and skills that a graduate who has been awarded thatqualification has attained, and the typical volume of learning associated with that qualification type.
This program is at AQF Qualification Level 06. Graduates at this level will have broad knowledge and skillsfor paraprofessional/highly skilled work and/or further learning.
The full set of levels criteria and qualification type descriptors can be found by visiting www.aqf.edu.au.
Program Information SetView USQ’s admission criteria, student profiles and a summary of all offers made under Course AdmissionInformation Set via the QTAC website.
Admission requirementsTo be eligible for admission, applicants must satisfy the following requirements:
● Have achieved a minimum Australian Tertiary Admission Rank (ATAR) of 62.7, or equivalentqualification.^
● English Language Proficiency requirements for Category 2
Applicants are advised to also note the following:
● Assumed knowledge expectations: English; General Mathematics● Recommended Prior Study: Mathematical Methods (Units 3 & 4, C) or equivalent
All students are required to satisfy the applicable English language requirements.
If students do not meet the English language requirements they may apply to study a University-approvedEnglish language program. On successful completion of the English language program, students may beadmitted to an award program.
These are determined by the University for specific programs each Semester. The 2021 ATAR andtertiary entrance ranks are based on agreed QTAC schedules which assess formal study at Year 12 or
^
equivalent level, tertiary, preparatory, professional or vocational qualifications or work experience, asdetailed in the QTAC Assessment of Qualifications Manual and QTAC Assessor Guidelines.
Adjustment factors may help you get into the program of your choice by increasing your entrance rank.The additional points don't apply to all applicants or all programs. Please read the information aboutUSQ's Adjustment Factors carefully to find out what you may be eligible for.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208113© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Construction (ADCN) - ADegConstruction (2022)
Program fees
Commonwealth supported placeA Commonwealth supported place is where the Australian Government makes a contribution towards the costof a students' higher education and students pay a student contribution amount, which varies depending onthe courses undertaken. Students are able to calculate the fees for a particular course via the Course FeeSchedules.
Commonwealth Supported students may be eligible to defer their fees through a Government loan calledHECS-HELP.
Domestic full fee paying placeDomestic full fee paying places are funded entirely through the full fees paid by the student. Full fees varydepending on the courses that are taken. Students are able to calculate the fees for a particular course via theCourse Fee Schedule
Domestic full fee paying students may be eligible to defer their fees through a Government loan called FEE-HELP provided they meet the residency and citizenship requirements.
Australian citizens, Permanent Humanitarian Visa holders, Permanent Resident visa holders and New Zealandcitizens who will be resident outside Australia for the duration of their program pay full tuition fees and arenot eligible for FEE-Help.
International full fee paying placeInternational students pay full fees. Full fees vary depending on the courses that are taken and whether theyare studied on-campus, via distance education/online. Students are able to calculate the fees for a particularcourse via the Course Fee Schedules.
Program structureThe Associate Degree of Construction is a 16 unit program consisting of Academic courses and Practicecourses comprising a core major study component and a minor study. The Associate Degree of Constructioncomprises either two years of full-time study or four years of part-time study.
The components of the program are shown in the following table:
Practice CoursesAcademic CoursesProgramComponent UnitsNumber of CoursesUnitsNumber of Courses
031212Core Major Study
44Minor Study
031616Total
Required time limitsStudents have a maximum of 6 years to complete this program.
Core coursesThe courses that comprise the core major study program are listed in the following table:
UnitsCourses
Academic Courses
1ENG1002 Introduction to Engineering and Built Environment Applications
1ENM1500 Introductory Engineering Mathematics
1CMG1001 Introduction to Construction Management and the Built Environment
1ENG1100 Introduction to Engineering Design
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208114© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Construction (ADCN) - ADegConstruction (2022)
1ENG1003 Problem Solving in Engineering and the Built Environment
1CMG1002 Residential Construction: Methods, Materials and Management
1CMG2001 Job Organisation
1SVY1500 Spatial Science for Engineers
1LAW1500 Introduction to Business and Company Law
1CIV2605 Construction Engineering
1CMG2003 Construction Production Management
1CMG2002 Cost Management: Estimating, Measurement and Cost Control
Practice Courses
0ENG1901 Engineering Practice 1
0CIV3906 Civil Materials Practice
0ENG2909 Work Experience - Associate
Major studiesThe Associate Degree of Construction consists of a core major study component in Construction Managementand a minor study. The major study provides students with knowledge and skills in a specific discipline.
Minor StudiesThe Associate Degree of Construction consists of a core major component and a minor study. The minor studyprovides students with knowledge and skills in a specific area or specialisation. A minor study in a programis a group of four units of courses that provides students an appropriate breadth of study in an area ofspecialisation. Students must complete four (4) units from one of the minors listed below.
The minor studies available are:
● Building● Civil● Transdisciplinary
Please refer to the recommended enrolment pattern for details.
Practical experienceTo be eligible to graduate from the Associate Degree of Construction, students must obtain an aggregate ofat least 30 days of suitable work experience in an architectural, engineering or construction organisation.Students are required to enrol in ENG2909 Work Experience - Associate in the latter part of the program andmaintain a record of their practical experience as specified by the Course Specification. The record of workexperience must be made available for perusal by the Faculty of Health, Engineering and Sciences uponrequest. Work experience is to be certified by an appropriate person in the organisation that is providing theworkplace experience and to be submitted to the examiner. The student must meet all costs associated withthe acquisition of work experience to satisfy this requirement.
Credit or exemptions for ENG2909 Work Experience - Associate will not normally be considered.
IT requirementsStudents should refer to the USQ minimum computing standards to check that their computers are capable ofrunning the appropriate software and versions of Internet web browsers and to check the minimum andrecommended standards for software. Specialist software is required for some courses.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208115© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Construction (ADCN) - ADegConstruction (2022)
Residential schoolsThe attendance requirement of residential schools within this degree is indicated by the following letters: R= Recommended; HR = Highly Recommended; M = Mandatory. To find out more about residential schools,visit the Residential School Schedule to view specific dates for your degree, or visit the Policy and ProcedureLibrary.
Students are required to undertake practical and professional activities relevant to their program throughenrolment in a series of Practice courses in the program. Practice courses are zero unit courses that may beundertaken in either on-campus or external mode and the final grades available are Pass (P)/Fail (F) only.They are a compulsory part of the program and do not attract a student contribution charge for Australianresidents or a tuition fee for international students. The recommended enrolment schedule for Practice coursesis shown in the Recommended Enrolment Pattern for the program in this Handbook.
External students must attend a number of residential schools during their program to obtain experience inpractical and professional activities appropriate to the program. The residential schools are included in Practicecourses which are conducted in Semester 3 or during the recess periods. The dates for each residential schoolPractice course are shown in the Residential School Schedule in this Handbook and external students shouldensure they are able to attend the residential school prior to enrolling in a Practice course. Personal protectiveequipment is compulsory in many engineering, construction and spatial science laboratories, students shouldconfirm the requirements before attending residential schools for Practice courses.
Students who enrol in on-campus mode for Practice courses normally undertake a series of weekly activitiesand/or attend a compulsory residential school.
ArticulationStudents articulate into the Bachelor of Construction (Honours) program.
Exit pointsStudents who, for whatever reason, are unable to complete the Associate Degree of Construction, and whosatisfy all of the requirements of the Diploma of Engineering Studies may be permitted to exit with that award.
CreditExemptions/credit will be assessed based on the USQ Credit and Exemption Procedure.
Work Experience
Work and industrial experience that has not been formally assessed, does not normally qualify for coursecredit in the Associate Degree of Construction program. Existing work experience may be used to satisfy thepractical/work experience requirements when completing the ENG2909 Work Experience - Associate practicecourse.
HonoursHonours will not be awarded in this program.
Other informationFull-time, on-campus students may, with the permission of the Faculty of Health, Engineering and Sciences,undertake courses by online study. This may be desirable if students wish to extend the range of courses opento them in the Approved course areas.
In exceptional cases, the Faculty may permit a student to enrol in an approved course other than those specifiedfor the accredited program, provided the course is drawn from another accredited associate degree programin the area of Engineering and Built Environment. Students who wish to enrol in courses other than thoselisted, must obtain written approval prior to enrolling in the course.
To satisfy the requirements of the program students must complete all of the Academic courses and the Practicecourses in the following tables that show the recommended enrolment patterns for on-campus and external
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208116© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Construction (ADCN) - ADegConstruction (2022)
students. Students following a non-standard enrolment pattern should consult the course specification toascertain if a course is offered in another term
Construction Management Major recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Major study: Construction Management (Major Study Code: 17529)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,2211ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,2111ENM1500 Introductory Engineering Mathematics*
1,2211ENG1003 Problem Solving in Engineering and the BuiltEnvironment
1111CMG1001 Introduction to Construction Management and
the Built Environment#
Pre-requisite: CMG10012221CMG1002 Residential Construction: Methods, Materials
and Management#
2,1121ENG1100 Introduction to Engineering Design2221Minor Study (Select from the Minor list)
2121SVY1500 Spatial Science for Engineers
Practice Courses Year 1
M2,3211ENG1901 Engineering Practice 1
Academic Courses Year 2
1312CIV2605 Construction Engineering1312Minor study (Select from the Minor list)1412Minor study (Select from the Minor list)
Pre-requisite: CMG1001 andENG1100
1412CMG2002 Cost Management: Estimating, Measurement
and Cost Control#
2322CMG2001 Job OrganisationPre-requisite: Students enrolled in one of the following
2322LAW1500 Introduction to Business and Company Law
Programs: LLBP or BLAW orBABL or BALW or BBBL orBBLA or BCLA or BCLW arenot eligible for enrolment Enrolment is not permitted inLAW1500 if LAW1101 hasbeen previously completedPre-requisite: CMG10022422CMG2003 Construction Production Management#
2422Minor study (Select from the Minor list)
Practice Courses Year 2
Pre-requisite: MEC1201 andENG1901 or Students must
M3312CIV3906 Civil Materials Practice
be enrolled in one of the following programs: ADCN orBCON or BCNH
1,33ENG2909 Work Experience - Associate
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208117© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Construction (ADCN) - ADegConstruction (2022)
FootnotesStudents who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study ofENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineeringand Sciences for further information.
*
On-campus mode not available in Toowoomba.#
Building Minor recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Enrolment requirementsYear of program and semester in which courseis normally studied
Course
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Students undertaking a Building minor must complete the following two courses:
22CIV2502 Structural and Building TechnologyPre-requisite: CMG1001 and CIV2502 or Students must be enrolled in the followingProgram: MEPR
1CMG3003 Building Services: Methods, Materials andManagement
Plus any two courses from the following list:
11URP1001 Introduction to Urban and Regional Planning22URP3201 Sustainable Urban Design and Development11URP2001 Planning Structures and Statutory Planning*
22URP2002 Local Government Planning Practice and
Technology*
Enrolment is not permitted in MGT3203 ifMGT2203 has been previously completed.
2,32MGT3203 Project Management Processes
FootnotesUnavailable in on-campus mode in 2022*
Civil Minor recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Enrolment requirementsYear of program and semester in which courseis normally studied
Course
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Students undertaking a Civil minor must complete the following two courses:
Pre-requisite: MAT1500 or ENG1500 orENM1500 or ENM1600 or Students must be
11CIV2701 Road Design and Location
enrolled in one of the following Programs:GCST or GDST or GCEN or GEPR
2CIV3603 Construction Methods
Plus any two courses from the following list:
Pre-requisite or Co-requisite: ENM1500 orENG1500 or MAT1500 or ENM1600
1,31CIV1500 Applied Mechanics
22CIV3703 Transport EngineeringPre-requisite: CIV1501 or CIV1500 or Students must be enrolled in one of the following Programs: MENS or GCEN or GEPR
22CIV2403 Geology and Geomechanics
Pre-requisite: CIV2401 or CIV2403 or Students must be enrolled in one of the follow
22CIV3403 Geotechnical Engineering
ing Programs: GCEN or METC or MEPR orGCNS or GDNS or MENS
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208118© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Construction (ADCN) - ADegConstruction (2022)
Enrolment requirementsYear of program and semester in which courseis normally studied
Course
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: ENM1600 or (ENM1500 andCIV1500) or Students must be enrolled in
2,32CIV1501 Engineering Statics
one of the following Programs: MEPR or GCEN or GEPR
1,2,31MEC1201 Engineering Materials1,21,2ENM1600 Engineering Mathematics22ENV3105 Hydrology
Transdisciplinary Minor recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Enrolment requirementsYear of program and semester in which courseis normally studied
Course
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Students undertaking a Transdisciplinary minor should choose four (4) courses from the other twominors, subject to any requisite requirements:
Choose any four (4) courses from the other two minors:
22Choose a course from the other two minors11Choose a course from the other two minors11Choose a course from the other two minors22Choose a course from the other two minors
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208119© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Construction (ADCN) - ADegConstruction (2022)
Associate Degree of Engineering (ADNG) - AssocDegEngQTAC code (Australian and New Zealand applicants): Toowoomba campus: 907051; External: 907055;Springfield campus: 927051
CRICOS code (International applicants): 054271G
External*#On-campus^+
Semester 1 (February)Semester 2 (July)Semester 3 (November)
Semester 1 (February)Semester 2 (July)
Start:
-Springfield, ToowoombaCampus:
Commonwealth supported placeCommonwealth supported placeFees:Domestic full fee paying placeDomestic full fee paying placeInternational full fee paying placeInternational full fee paying place
2 years full-time, 4 years part-timeStandard duration:
From: Foundation Diploma of University Studies (Engineering or Spatial Sciencespecialisation)
Programarticulation:
To: Bachelor of Engineering Science; Bachelor of Engineering (Honours)
FootnotesThe only majors available on-campus at USQ Springfield are Civil Engineering, Electrical and Electronic Engineering and MechanicalEngineering.
^
The Instrumentation Control and Automation Engineering major is only available via external study.+External students must be able to attend mandatory and highly recommended residential schools at a USQ campus.*The semester 3 intake is only available via external study.#
Contact us
Current studentsFuture International studentsFuture Australian and NewZealand students
Ask a questionFreecall (within Australia): 1800007 252Phone (from outside Australia): +617 4631 2285Email [email protected]
Ask a questionPhone: +61 7 4631 5543Email: [email protected]
Ask a questionFreecall (within Australia): 1800269 500Phone (from outside Australia): +617 4631 5315Email: [email protected]
Professional accreditationAll majors (except Agricultural, Instrumentation Control and Automation Engineering, and Mining Engineering)in this program have received full accreditation from Engineers Australia. Provisional accreditation has beengranted for the Agricultural, Instrumentation Control and Automation Engineering, and Mining Engineeringmajors. Graduates of this program are eligible to apply for membership of Engineers Australia as an EngineeringAssociate (Officer). After further professional development, a graduate member with an Associate Degreemay apply for chartered status as an Engineering Officer and, when granted, may use the post-nominalAMIEAust CEngO.
Graduates of this program in the Mining Engineering major are eligible to apply for Associate Grademembership of AusIMM (Australasian Institute of Mining and Metallurgy).
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208120© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Program aimsThe Associate Degree of Engineering is a tertiary level program designed to educate engineering associatesin the theory, methods and practices necessary to support professional engineers. It is also designed so thatstudents are eligible for membership of Engineers Australia (as an Engineering Associate) and other appropriateprofessional bodies. To this end, the program is designed to provide a general understanding of a broad fieldof knowledge, with specified electives (approved courses) available in most majors in the final stages of theprogram to allow a measure of specialisation.
Program objectivesUpon successful completion of the degree, students should be able to:
● Display broad knowledge that underpins relevant engineering practice.● Identify the social purpose of engineering and the relationship between human-made products and systems,
and community needs.● Apply established tools and techniques to solve a range of well-defined engineering problems in diverse
environmental, technical and social contexts.● Apply relevant management and design procedures to contribute to the delivery of engineering projects
within given constraints.● Make guided judgements when identifying and responding to cultural, ethical and social issues, including
those relevant to indigenous peoples.● Communicate effectively in English using oral, written and technology-based approaches; and apply
effective competencies as a team member and individual within the practice domain.● Engage in lifelong learning through reflection, and be accountable for their personal and professional
actions by managing personal performance.
Australian Qualifications FrameworkThe Australian Qualifications Framework (AQF) is a single national, comprehensive system of qualificationsoffered by higher education institutions (including universities), vocational education and training institutionsand secondary schools. Each AQF qualification has a set of descriptors which define the type and complexityof knowledge, skills and application of knowledge and skills that a graduate who has been awarded thatqualification has attained, and the typical volume of learning associated with that qualification type.
This program is at AQF Qualification Level 06. Graduates at this level will have broad knowledge and skillsfor paraprofessional/highly skilled work and/or further learning.
The full set of levels criteria and qualification type descriptors can be found by visiting www.aqf.edu.au.
Program Information SetView USQ’s admission criteria, student profiles and a summary of all offers made under Course AdmissionInformation Set via the QTAC website.
Admission requirementsTo be eligible for admission, applicants must satisfy the following requirements:
● Have achieved a minimum Australian Tertiary Admission Rank (ATAR) of 62.7, or equivalentqualification.^
● English Language Proficiency requirements for Category 2.
Applicants are advised to also note the following:
● Assumed knowledge expectations: English; General Mathematics● Recommended Prior Study: Mathematical Methods (Units 3 & 4, C) or equivalent.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208121© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
All students are required to satisfy the applicable English language requirements.
If students do not meet the English language requirements they may apply to study a University-approvedEnglish language program. On successful completion of the English language program, students may beadmitted to an award program.
These are determined by the University for specific programs each Semester. The 2021 ATAR andtertiary entrance ranks are based on agreed QTAC schedules which assess formal study at Year 12 or
^
equivalent level, tertiary, preparatory, professional or vocational qualifications or work experience, asdetailed in the QTAC Assessment of Qualifications Manual and QTAC Assessor Guidelines.
Adjustment factors may help you get into the program of your choice by increasing your entrance rank.The additional points don't apply to all applicants or all programs. Please read the information aboutUSQ's Adjustment Factors carefully to find out what you may be eligible for.
Program fees
Commonwealth supported placeA Commonwealth supported place is where the Australian Government makes a contribution towards the costof a students' higher education and students pay a student contribution amount, which varies depending onthe courses undertaken. Students are able to calculate the fees for a particular course via the Course FeeSchedules.
Commonwealth Supported students may be eligible to defer their fees through a Government loan calledHECS-HELP.
Domestic full fee paying placeDomestic full fee paying places are funded entirely through the full fees paid by the student. Full fees varydepending on the courses that are taken. Students are able to calculate the fees for a particular course via theCourse Fee Schedule
Domestic full fee paying students may be eligible to defer their fees through a Government loan called FEE-HELP provided they meet the residency and citizenship requirements.
Australian citizens, Permanent Humanitarian Visa holders, Permanent Resident visa holders and New Zealandcitizens who will be resident outside Australia for the duration of their program pay full tuition fees and arenot eligible for FEE-Help.
International full fee paying placeInternational students pay full fees. Full fees vary depending on the courses that are taken and whether theyare studied on-campus, via distance education/online. Students are able to calculate the fees for a particularcourse via the Course Fee Schedules.
Program structureThe Associate Degree of Engineering is a 16-unit program consisting of Academic Courses and PracticeCourses. Students undertake a major of study, including approved courses which students are able to select.
Academic courses are normally one-unit courses and involve approximately 155 hours of student work perunit.
Practice courses are zero unit courses and each involves approximately 50 hours of student work.
Required time limitsStudents have a maximum of 6 years to complete this program.
Core coursesThe courses that comprise the core studies program are shown in the following table:
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208122© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
1,21,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,211ENG1003 Problem Solving in Engineering and theBuilt Environment
1,21,21,2ENG1100 Introduction to Engineering Design
222ENG2111 Engineering Associate Degree DesignProject
1,2,31,21,2ENM1500 Introductory Engineering Mathematics
Practice Courses
2,311,2ENG1901 Engineering Practice 1
1,2ENG2909 Work Experience - Associate
Major studiesThe Associate Degree of Engineering consists of a core component and a series of major studies. All studentsmust complete the core courses and one of the major studies. The major study provides students with knowledgeand skills in a specific discipline. The major study areas in the USQ Associate Degree of Engineering arelisted below. The Instrumentation Control and Automation Engineering major is designed for processtechnologists in industry who wish to upgrade their qualifications. As such, the program will normally beundertaken by external study.
ExternalOn-Campus SpringfieldOn-Campus ToowoombaMajor
YesNoYesAgricultural Engineering
YesYesYesCivil Engineering
YesYesYesElectrical and ElectronicEngineering
YesNoNoInstrumentation Controland AutomationEngineering
YesYesYesMechanical Engineering
YesNoYesMining Engineering
Agricultural Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
22AGR2301 Agricultural Science
11AGR2302 Agricultural Machinery
1,311CIV1500 Applied Mechanics
2,322CIV1501 Engineering Statics
222CIV2403 Geology and Geomechanics
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208123© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
111ENV2103 Hydraulics I
222ENV3105 Hydrology
1,2,31,21,2MEC1201 Engineering Materials
222SVY1500 Spatial Science for Engineers
Approved courses (x2)
Practice Courses
3AGR2902 Field Practice
2,322CIV2901 Geology and Geomechanics Practice
1,2,322ENV2902 Hydraulics Practice
Civil Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
1,311CIV1500 Applied Mechanics
2,322CIV1501 Engineering Statics
222CIV2403 Geology and Geomechanics
222CIV2502 Structural and Building Technology
111CIV2605 Construction Engineering
111CIV2701 Road Design and Location
222CIV2702 Municipal Services
111ENV2103 Hydraulics I
1,2,31,21,2MEC1201 Engineering Materials
222SVY1500 Spatial Science for Engineers
Approved course (x1)
Practice Courses
2,322CIV2901 Geology and Geomechanics Practice
311CIV3906 Civil Materials Practice
1,2,322ENV2902 Hydraulics Practice
Electrical and Electronic Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
111ELE1301 Computer Engineering
111ELE1502 Electronic Circuits
2,322ELE1801 Electrical Technology
222ELE2101 Control and Instrumentation
222ELE2501 Electronic Workshop and Production
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208124© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
222ELE2503 Electronic Systems
111ELE2601 Telecommunications Principles
111ELE2702 Electrical Measurement and Analysis
1,2,31,21,2MEC1201 Engineering Materials
Approved Courses (x2)
Practice Courses
322ELE1911 Electrical and Electronic Practice A
311ELE2912 Electrical and Electronic Practice B
2ELE2913 Electrical and Electronic Practice C
Instrumentation Control and Automation Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
1,311CIV1500 Applied Mechanics
111ELE1301 Computer Engineering
111ELE1502 Electronic Circuits
2,322ELE1801 Electrical Technology
222ELE2101 Control and Instrumentation
1,2,31,21,2MEC1201 Engineering Materials
2MEC1501 Introduction to Industrial Processes
222MEC2106 Introduction to Thermofluids
2MEC2501 Process Control Systems
Approved Courses (x2)
Practice Courses
322ELE1911 Electrical and Electronic Practice A
311MEC2901 Mechanical Practice 1
Mechanical Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
1,311CIV1500 Applied Mechanics
2,322CIV1501 Engineering Statics
2,322ELE1801 Electrical Technology
1,21,21,2ENM1600 Engineering Mathematics
1,2,31,21,2MEC1201 Engineering Materials
222MEC2106 Introduction to Thermofluids
111MEC2202 Manufacturing Processes
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208125© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
222MEC2301 Design of Machine Elements
111MEC2402 Stress Analysis
111MEC2405 Machine Dynamics
Approved Course (x1)
Practice Courses
311MEC2901 Mechanical Practice 1
111MEC2902 Mechanical Practice 2
32MEC3903 Mechanical Practice 3
Mining Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
1,311CIV1500 Applied Mechanics
2,322CIV1501 Engineering Statics
222CIV2403 Geology and Geomechanics
111CIV2605 Construction Engineering
1,2,31,21,2MEC1201 Engineering Materials
1MIN2001 Mining Technology and Mineral Processing
2MIN2002 Mine Planning and Design
2MIN2003 Mine Operations and Management
222SVY1500 Spatial Science for Engineers
Approved courses (x2)
Practice Courses
2,322CIV2901 Geology and Geomechanics Practice
3MIN2901 Mining Practice*
Footnotesoffered in Semester 3 in odd years only e.g. 2019, 2021 etc*
Practical experienceTo be eligible to graduate from the Associate Degree of Engineering, students must obtain an aggregate of atleast 30 days of suitable work experience during their program. This experience may be in an engineeringoffice or laboratory where the student would be working principally with professional engineers and engineeringassociates. It may, however, be preferable for students to spend some time in field or factory activities to gaininsight into industrial practice and to see what is involved in converting designs into finished products. Studentsare required to enrol in ENG2909 Work Experience - Associate in the latter part of their program and keep arecord of appropriate experience as specified in the Course Specification. The work experience is to be endorsedby an appropriate person in the organisation providing the experience and submitted to the examiner. Thestudent must meet all costs associated with the acquisition of work experience to satisfy this requirement. Therecord of work experience must be made available for perusal by the Faculty of Health, Engineering andSciences upon request. The acceptability or otherwise of employment experience, and the period of that typeof experience that may be credited towards the 30 days, will be determined by the Examiner of ENG2909Work Experience - Associate.
Credit or exemptions for ENG2909 Work Experience - Associate will not normally be considered.This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081
26© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
IT requirementsAccess to an up-to-date computer is necessary. On-campus students can access appropriately equippedlaboratories, but should consider acquisition of their own computer. External students should be able to accessa computer with the following minimum standards as advised by the University. All students should haveaccess to email and the Internet via a computer running the latest versions of Internet web browsers such asInternet Explorer or Firefox. The University has a wireless network for on-campus students' computers. Inorder to take advantage of this facility and further enhance their on-campus learning environment, studentsshould consider purchasing a notebook/laptop computer with wireless connectivity. Specialist software isrequired for some courses.
Residential schoolsThe attendance requirement of residential schools within this degree is indicated by the following letters: R= Recommended; HR = Highly Recommended; M = Mandatory. To find out more about residential schools,visit the Residential School Schedule to view specific dates for your degree, or visit the Policy and ProcedureLibrary.
Students are required to undertake practical and professional activities relevant to their program throughenrolment in a series of Practice courses in the program. Practice courses are zero unit courses that may beundertaken in either on-campus or external mode and the final grades available are Pass (P)/Fail (F) only.They are a compulsory part of the program and do not attract a student contribution charge for Australianresidents or a tuition fee for international students. The recommended enrolment schedule for Practice coursesis shown in the Recommended Enrolment Pattern for the program in this Handbook.
External students must attend a number of residential schools during their program to obtain experience inpractical and professional activities appropriate to the program. The residential schools are included in Practicecourses which are conducted in Semester 3 or during the mid-semester recess periods. The dates for eachresidential school Practice course are shown in the Residential School schedule in this Handbook and externalstudents should ensure they are able to attend the residential school prior to enrolling in a Practice course.Personal protective equipment is compulsory in many engineering, construction and spatial science laboratories.Students should confirm the requirements before attending residential schools for Practice courses.
Students who enrol in on-campus mode for Practice courses normally undertake a series of weekly activitiesand/or attend a compulsory residential school.
Agricultural Engineering
● ENG1901 Engineering Practice 1● CIV2901 Geology and Geomechanics Practice● ENV2902 Hydraulics Practice● AGR2902 Field Practice
Civil Engineering
● ENG1901 Engineering Practice 1● CIV2901 Geology and Geomechanics Practice● ENV2902 Hydraulics Practice● CIV3906 Civil Materials Practice
Electrical and Electronic Engineering
● ENG1901 Engineering Practice 1● ELE1911 Electrical and Electronic Practice A● ELE2912 Electrical and Electronic Practice B● CHE1110 Chemistry 1 (Elective)
Instrumentation Control and Automation Engineering
● ENG1901 Engineering Practice 1
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208127© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
● MEC2901 Mechanical Practice 1● ELE1911 Electrical and Electronic Practice A● CHE1110 Chemistry 1 (Elective)● CHE2120 Chemistry 2 (Elective)
Mechanical Engineering
● ENG1901 Engineering Practice 1● MEC2901 Mechanical Practice 1● MEC2902 Mechanical Practice 2● MEC3903 Mechanical Practice 3
Mining Engineering
● ENG1901 Engineering Practice 1● CIV2901 Geology and Geomechanics Practice● MIN2901 Mining Practice
ArticulationStudents who have completed an Associate Degree of Engineering program, or equivalent, may articulate tothe Bachelor of Engineering Science or the Bachelor of Engineering (Honours). The amount of credit granteddepends upon the field of study and approved courses completed in the Associate Degree of Engineeringprogram and the field of study selected in the Bachelor of Engineering Science or Bachelor of Engineering(Honours) and is maximised for students undertaking the relevant pathway.
Engineering Pathways
A special Pathway has been developed for students who intend to study the Bachelor of Engineering Scienceor the Bachelor of Engineering (Honours) once they have completed the Associate Degree of Engineeringprogram. Pathway to the Bachelor of Engineering Science or the Bachelor of Engineering (Honours) maximisesthe advanced standing (exemptions) students will receive in these programs. A Pathway to the Bachelor ofEngineering Science or the Bachelor of Engineering (Honours) has been developed for each of the followingAssociate Degree of Engineering majors into the equivalent major:
● Agricultural Engineering● Civil Engineering● Electrical and Electronic Engineering● Instrumentation Control and Automation Engineering [only into the Bachelor of Engineering (Honours)]● Mechanical Engineering
In addition, students enrolled in the Civil Engineering major may articulate into the following Bachelor ofEngineering Science or Bachelor of Engineering (Honours) major:
● Environmental Engineering
In addition, students enrolled in the Mining Engineering major may articulate into the following Bachelor ofEngineering Science or Bachelor of Engineering (Honours) major:
● Civil Engineering
In addition, students enrolled in the Electrical and Electronic Engineering major may articulate into thefollowing Bachelor of Engineering Science or Bachelor of Engineering (Honours) majors:
● Computer Systems Engineering● Power Engineering
Pathway to the Bachelor of Engineering Science or the Bachelor of Engineering (Honours) has been speciallydeveloped for students who study part-time. Full-time students may seek approval to follow the Pathway to
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208128© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
the Bachelor of Engineering Science or the Bachelor of Engineering (Honours), but it is not timetabled foron-campus students.
Students must have the approval of the Faculty of Health, Engineering and Sciences to undertake the Pathwayto the Bachelor of Engineering Science or the Bachelor of Engineering (Honours). Students are stronglyadvised to consider and apply for approval for this Pathway as soon as possible in order to maximise the creditthey will receive in the Bachelor of Engineering Science or the Bachelor of Engineering (Honours). Thisshould be done prior to the commencement of the second year of studies if possible, and after successfulcompletion of at least eight (8) academic courses in the Associate Degree, including any courses specified asa major Pathway.
The Faculty will take into consideration a student's GPA before granting approval. Once approval is granted,the Faculty will advise students of the courses they should study when granting approval for them to followthe Pathway to the Bachelor of Engineering Science or the Bachelor of Engineering (Honours).
Pathways to the Engineering Majors
The following tables list the changes to the courses in each major which should be observed to undertake aPathway into either the Bachelor of Engineering Science or the Bachelor of Engineering (Honours). Pathwaystudents should seek advice from the Faculty of Health, Engineering and Sciences before selecting theirapproved courses.
Agricultural Engineering (BENS or BENH)
Substitute courseCourse to NOT be studied
ENM1600 Engineering MathematicsENM1500 Introductory Engineering Mathematics
Students should contact the Faculty of Health, Engineering and Sciences regarding the selection of theirApproved courses.
Civil Engineering (BENS or BENH)
Substitute course(s)Course(s) to NOT be studied
ENM1600 Engineering MathematicsENM1500 Introductory Engineering Mathematics
CIV3703 Transport EngineeringCIV2702 Municipal Services
ENV4203 Public Health Engineering1 Approved Course
Computer Systems Engineering (BENH)
Students wishing to articulate to this major should enrol in the Associate Degree of Engineering (Electricaland Electronic Engineering).
Substitute courseCourse to NOT be studied
ENM1600 Engineering MathematicsENM1500 Introductory Engineering Mathematics
Semester(s) OfferedApproved Courses(choose thefollowing)
OnlineExternalSpringfieldToowoomba
1,2,31,21,2CSC1401FoundationProgramming
Students should contact the Faculty of Health, Engineering and Sciences regarding the selection of theirremaining Approved courses.
Electrical and Electronic Engineering (BENS or BENH)
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208129© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Substitute course(s)Course(s) to NOT be studied
ENM1600 Engineering MathematicsENM1500 Introductory Engineering Mathematics
ELE2103 Linear Systems and ControlELE2101 Control and Instrumentation
ELE2504 Electronic Design and AnalysisELE2503 Electronic Systems
Students should contact the Faculty of Health, Engineering and Sciences before they have completed theirfirst semester regarding the selection of their Approved courses. Students enrolled in this major may need tocomplete their Recommended Enrolment Pattern out of sequence in order to satisfy the pre-requisites for thePathway courses.
Environmental Engineering (BENS or BENH)
Students wishing to articulate to this major should enrol in the Associate Degree of Engineering (CivilEngineering).
Substitute courseCourse to NOT be studied
ENM1600 Engineering MathematicsENM1500 Introductory Engineering Mathematics
Students should contact the Faculty of Health, Engineering and Sciences regarding the selection of theirApproved courses.
Instrumentation Control and Automation Engineering (BENH)
Substitute courseCourse to NOT be studied
ENM1600 Engineering MathematicsENM1500 Introductory Engineering Mathematics
Students should contact the Faculty of Health, Engineering and Sciences regarding the selection of theirApproved courses.
Mechanical Engineering (BENS or BENH)
Substitute courseCourse to NOT be studied
Additional Approved courseENM1500 Introductory Engineering Mathematics
and students should contact the Faculty of Health, Engineering and Sciences before they have completed theirfirst semester regarding the selection of their Approved courses. Students enrolled in this major may need tocomplete their Recommended Enrolment Pattern out of sequence in order to satisfy the pre-requisites for thePathway courses.
Power Engineering (BENH)
Students wishing to articulate to this major should enrol in the Associate Degree of Engineering (Electricaland Electronic Engineering).
Substitute courseCourse to NOT be studied
Additional Approved courseENM1500 Introductory Engineering Mathematics
Students should contact the Faculty of Health, Engineering and Sciences before they have completed theirfirst semester regarding the selection of their Approved courses. Students enrolled in this major may need tocomplete their Recommended Enrolment Pattern out of sequence in order to satisfy the pre-requisites for thePathway courses.
Exit pointsStudents who, for whatever reason, are unable to complete the Associate Degree of Engineering, and whosatisfy all of the requirements of the Diploma of Engineering Studies may be permitted to exit with that award.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208130© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
CreditApplications for exemptions/credit will be assessed and based upon the USQ Credit and Exemption Procedure.
Work Experience
Work and industrial experience that has not been formally assessed, does not normally qualify for coursecredit in the Associate Degree of Engineering program. Existing work experience may be used to satisfy thepractical/work experience requirements when completing the ENG2909 Work Experience - Associate practicecourse.
Other informationThe Faculty of Health, Engineering and Sciences may permit a student to enrol in an approved course otherthan those listed for the accredited program. Students who wish to enrol in approved courses other thanthose listed, must obtain written approval from the Program Director prior to enrolling in the course.
To satisfy the requirements of the program students must complete all Academic and Practice courses in thefollowing recommended enrolment patterns. Students following a non-standard enrolment pattern shouldconsult the course specification to ascertain if a course is offered in another term.
Agricultural Engineering major full-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Students who wish to complete a Pathway to another degree in Agricultural Engineering should seek advicefrom the Faculty of Health, Engineering and Sciences before enrolling in their courses.
Major study: Agricultural Engineering (Major Study Code: 16245)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,211ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,2,311ENM1500 Introductory Engineering Mathematics#*
1,211ENG1003 Problem Solving in Engineering and the BuiltEnvironment
Pre-requisite or Co-requisite:ENM1500 or ENG1500 orMAT1500 or ENM1600
1,311CIV1500 Applied Mechanics
1,221ENG1100 Introduction to Engineering DesignPre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,321CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
1,2,321MEC1201 Engineering Materials221SVY1500 Spatial Science for Engineers
Practice Courses Year 1
M2,311ENG1901 Engineering Practice 1
Academic Courses Year 2
112AGR2302 Agricultural MachineryPre-requisite: CIV1500 orCIV1501 or Students must be
112ENV2103 Hydraulics I
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208131© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Major study: Agricultural Engineering (Major Study Code: 16245)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
enrolled in the following Program: GCEN or GEPR
112Approved course (Select from the approved course list)#
112Approved course (select from the approved course list)#
222AGR2301 Agricultural SciencePre-requisite: CIV1501 orCIV1500 or Students must be
222CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPR
222ENV3105 HydrologyPre-requisite: ENG1100 and(ENG1101 or ENG1003)
222ENG2111 Engineering Associate Degree Design Project
Practice Courses Year 2
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,322CIV2901 Geology and Geomechanics Practice
Pre-requisite or Co-requisite:ENV2103 or ENV1101
M1,2,322ENV2902 Hydraulics Practice
M3AGR2902 Field Practice^
1,2ENG2909 Work Experience - Associate
Select approved courses from the following or elective courses as approved by the Program Director
11AGR3304 Soil Science#
22AGR3305 Precision and Smart Technologies in
Agriculture#
2CLI2201 Climate Change and Variability1,2,31,2ENG2002 Technology, Sustainability and Society#
1,21,2ENM1600 Engineering Mathematics#
Pre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR
11ENV2201 Land Studies11AGR3303 Agricultural Materials and Post-Harvest
Technologies#
FootnotesThis is a Pathway course. Please refer to Engineering pathways under Articulation.#Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study ofENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineeringand Sciences for further information.
*
The residential school for this course may involve overnight field trips for which each student will be responsible for their own accommodationcosts.
^
Agricultural Engineering major part-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208132© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Students who wish to complete a Pathway to another degree in Agricultural Engineering should seek advicefrom the Faculty of Health, Engineering and Sciences before enrolling in their courses.
Major study: Agricultural Engineering (Major Study Code: 16245)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
1,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,2,31,2ENM1500 Introductory Engineering Mathematics#*
1,21ENG1003 Problem Solving in Engineering and the BuiltEnvironment
1,21,2ENG1100 Introduction to Engineering Design
Year 2
Pre-requisite or Co-requisite:ENM1500 or ENG1500 orMAT1500 or ENM1600
1,31CIV1500 Applied Mechanics
1,2,31,2MEC1201 Engineering MaterialsPre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,32CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
22SVY1500 Spatial Science for Engineers
Year 2 Practice Courses
M2,31,2ENG1901 Engineering Practice 1
Year 3
11AGR2302 Agricultural MachineryPre-requisite: CIV1500 orCIV1501 or Students must be
11ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPR
22AGR2301 Agricultural SciencePre-requisite: CIV1501 orCIV1500 or Students must be
22CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPR
Year 3 Practice Courses
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,32CIV2901 Geology and Geomechanics Practice
Pre-requisite or Co-requisite:ENV2103 or ENV1101
M1,2,32ENV2902 Hydraulics Practice
M3AGR2902 Field Practice^
Year 4
Approved course (select from the approved course list)#
Approved course (select from the approved course list)#
22ENV3105 HydrologyPre-requisite: ENG1100 and(ENG1101 or ENG1003)
22ENG2111 Engineering Associate Degree Design Project
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208133© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Major study: Agricultural Engineering (Major Study Code: 16245)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 4 Practice Courses
1,2ENG2909 Work Experience - Associate
Select approved courses from the following or elective courses as approved by the Program Director
11AGR3304 Soil Science#
22AGR3305 Precision and Smart Technologies in
Agriculture#
2CLI2201 Climate Change and Variability1,2,31,2ENG2002 Technology, Sustainability and Society#
1,21,2ENM1600 Engineering Mathematics#
Pre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR
11ENV2201 Land Studies11AGR3303 Agricultural Materials and Post-Harvest
Technologies#
FootnotesThis is a Pathway course. Please refer to Engineering pathways under Articulation.#Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study ofENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineeringand Sciences for further information.
*
The residential school for this course may involve overnight field trips for which each student will be responsible for their own accommodationcosts.
^
Civil Engineering major full-time recommended enrolment pattern (Toowoomba andSpringfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Students who wish to complete a Pathway to another degree in Civil Engineering or Environmental Engineeringshould seek advice from the Faculty of Health, Engineering and Sciences before enrolling in their courses.
Major study: Civil Engineering (Major Study Code: 15433)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,21,21ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,211ENM1500 Introductory Engineering Mathematics#*
Pre-requisite or Co-requisite:ENM1500 or ENG1500 orMAT1500 or ENM1600
1,311CIV1500 Applied Mechanics
1,211ENG1003 Problem Solving in Engineering and the BuiltEnvironment
1,221ENG1100 Introduction to Engineering Design
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208134© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Major study: Civil Engineering (Major Study Code: 15433)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
1,2,321MEC1201 Engineering MaterialsPre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,321CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
221SVY1500 Spatial Science for Engineers
Practice Courses Year 1
M2,311ENG1901 Engineering Practice 1
Academic Courses Year 2
112Approved course (select from the approved course list)#
Pre-requisite: CIV1500 orCIV1501 or Students must be
112ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPRPre-requisite: MAT1500 orENG1500 or ENM1500 or
112CIV2701 Road Design and Location
ENM1600 or Students mustbe enrolled in one of the following Programs: GCST orGDST or GCEN or GEPR
112CIV2605 Construction EngineeringPre-requisite: CIV1501 orCIV1500 or Students must be
222CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPR
222CIV2502 Structural and Building TechnologyPre-requisite: ENV2103 orENV1101
222CIV2702 Municipal Services#
Pre-requisite: ENG1100 and(ENG1101 or ENG1003)
222ENG2111 Engineering Associate Degree Design Project
Practice Courses Year 2
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,322CIV2901 Geology and Geomechanics Practice
Pre-requisite or Co-requisite:ENV2103 or ENV1101
M1,2,322ENV2902 Hydraulics Practice
Pre-requisite: MEC1201 andENG1901 or Students must
M312CIV3906 Civil Materials Practice
be enrolled in one of the following programs: ADCN orBCON or BCNH
1,2ENG2909 Work Experience - Associate
Select approved courses from the following or other elective courses as approved by the ProgramCoordinator
1,2,31,2ENG2002 Technology, Sustainability and Society2CIV3603 Construction Methods22CIV3703 Transport Engineering#
22CMG2001 Job Organisation
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208135© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Major study: Civil Engineering (Major Study Code: 15433)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
2,32,3ENG4004 Engineering Project and Operations
Management‡
11ENV2201 Land Studies1,31GIS1402 Geographic Information Systems1,21,2ENM1600 Engineering Mathematics#
Enrolment is not permitted inREN1201 if REN8101 hasbeen previously completed.
11REN1201 Environmental Studies<
22URP3201 Sustainable Urban Design and Development22ENV3105 Hydrology
Pre-requisite: ENV1101 orENV2103 or Students must
22ENV4203 Public Health Engineering#
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
FootnotesThis is a Pathway course. Please refer to Engineering pathways under Articulation.#Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study ofENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineeringand Sciences for further information.
*
The semester 3 offering of this course is offered in even numbered years only.‡Unavailable in on-campus mode at Springfield in 2022<
Civil Engineering major part-time recommended enrolment pattern (Toowoomba andSpringfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Students who wish to complete a Pathway to another degree in Civil Engineering or Environmental Engineeringshould seek advice from the Faculty of Health, Engineering and Sciences before enrolling in their courses.
Major study: Civil Engineering (Major Study Code: 15433)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
1,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,21,2ENM1500 Introductory Engineering Mathematics#*
1,21,2ENG1100 Introduction to Engineering Design1,2,31,2MEC1201 Engineering Materials
Year 2
Pre-requisite or Co-requisite:ENM1500 or ENG1500 orMAT1500 or ENM1600
1,31CIV1500 Applied Mechanics
1,21ENG1003 Problem Solving in Engineering and the BuiltEnvironment
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,32CIV1501 Engineering Statics
Students must be enrolled in
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208136© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Major study: Civil Engineering (Major Study Code: 15433)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
one of the following Programs: MEPR or GCEN or GEPR
22SVY1500 Spatial Science for Engineers
Year 2 Practice Courses
M2,31,2ENG1901 Engineering Practice 1
Year 3
Approved course (select from the approved course list)#
Pre-requisite: CIV1500 orCIV1501 or Students must be
11ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPRPre-requisite: CIV1501 orCIV1500 or Students must be
22CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPR
22CIV2502 Structural and Building Technology
Year 3 Practice Courses
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,32CIV2901 Geology and Geomechanics Practice
Pre-requisite or Co-requisite:ENV2103 or ENV1101
M1,2,32ENV2902 Hydraulics Practice
Year 4
Pre-requisite: MAT1500 orENG1500 or ENM1500 or
11CIV2701 Road Design and Location
ENM1600 or Students mustbe enrolled in one of the following Programs: GCST orGDST or GCEN or GEPR
11CIV2605 Construction EngineeringPre-requisite: ENV2103 orENV1101
22CIV2702 Municipal Services#
Pre-requisite: ENG1100 and(ENG1101 or ENG1003)
22ENG2111 Engineering Associate Degree Design Project
Year 4 Practice Courses
Pre-requisite: MEC1201 andENG1901 or Students must
M31CIV3906 Civil Materials Practice
be enrolled in one of the following programs: ADCN orBCON or BCNH
1,2ENG2909 Work Experience - Associate
Select approved courses from the following or other elective courses as approved by the ProgramCoordinator
1,2,31,2ENG2002 Technology, Sustainability and Society2CIV3603 Construction Methods22CIV3703 Transport Engineering#
22CMG2001 Job Organisation
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208137© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Major study: Civil Engineering (Major Study Code: 15433)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
2,32,3ENG4004 Engineering Project and Operations
Management‡
11ENV2201 Land Studies1,31GIS1402 Geographic Information Systems1,21,2ENM1600 Engineering Mathematics#
Enrolment is not permitted inREN1201 if REN8101 hasbeen previously completed.
11REN1201 Environmental Studies<
22URP3201 Sustainable Urban Design and Development22ENV3105 Hydrology
Pre-requisite: ENV1101 orENV2103 or Students must
22ENV4203 Public Health Engineering#
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
FootnotesThis is a Pathway course. Please refer to Engineering pathways under Articulation.#Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study ofENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineeringand Sciences for further information.
*
The semester 3 offering of this course is offered in even numbered years only.‡Unavailable in on-campus mode at Springfield in 2022<
Electrical and Electronic Engineering major full-time recommended enrolment pattern(Toowoomba and Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
On entering the Associate Degree of Engineering (Electrical and Electronic Engineering) external studentsare required to purchase a kit of tools comprising an electronic soldering iron, wire strippers, long nose pliers,diagonal cutter, safety glasses and an electronic prototyping 'breadboard'. These will first be required forELE2501 Electronic Workshop and Production and ELE1502 Electronic Circuits, and further details will beprovided on commencement of these courses. Additionally, all students enrolled in course ELE2501 ElectronicWorkshop and Production will be required to purchase an electronic kit. For external students in the courseELE2702 Electrical Measurement and Analysis, access to a digital multimeter and hook-up wire is required,together with the purchase of some electronic components.
Students who wish to complete a Pathway to another degree in Electrical and Electronic Engineering orComputer Systems Engineering or Power Engineering should seek advice from the Faculty of Health,Engineering and Sciences before enrolling in their courses.
Major study: Electrical and Electronic Engineering (Major Study Code: 15435)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,21,21ENG1003 Problem Solving in Engineering and the BuiltEnvironment
1,2,311ENM1500 Introductory Engineering Mathematics#*
111ELE1301 Computer Engineering
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208138© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 15435)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
111ELE1502 Electronic Circuits1,221ENG1002 Introduction to Engineering and Built
Environment Applications1,2,31,21MEC1201 Engineering Materials221Approved course (select from the approved course list)#
Pre-requisite: ENM1500 orENM1600 or Students must
2,321ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
Practice Courses Year 1
M2,311ENG1901 Engineering Practice 1M321ELE1911 Electrical and Electronic Practice A
Academic Courses Year 2
1,212ENG1100 Introduction to Engineering DesignPre-requisite: (ENG1500 orMAT1500 or ENM1500 or
112ELE2702 Electrical Measurement and Analysis
ENM1600) and ELE1801 orStudents must be enrolled inthe following Program: GCENPre-requisite: (ELE1502 andELE1801) or Students must
112ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETC or GEPR
112Approved course (Select from the approved course list)#
Pre-requisite: (ELE1502 andELE1301) or Students must
222ELE2501 Electronic Workshop and Production
be enrolled in the followingProgram: GCENPre-requisite: ENM1500 orENM1600 or Students must
222ELE2101 Control and Instrumentation#
be enrolled in one of the following Programs: MEPR orGCEN or GEPRPre-requisite: ELE1502 or Students must be enrolled in
222ELE2503 Electronic Systems#
the following Program: GCENor GEPRPre-requisite: ENG1100 and(ENG1101 or ENG1003)
222ENG2111 Engineering Associate Degree Design Project
Practice Courses Year 2
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
M312ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENSPre-requisite: (ELE1301 andELE1502 and ELE1801) or
2ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENS
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208139© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 15435)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
1,2ENG2909 Work Experience - Associate
Select approved courses from the following or other elective courses as approved by the ProgramCoordinator
22ELE2103 Linear Systems and Control#
11ELE2303 Embedded Systems Design#
Pre-requisite: ELE1502 or Students must be enrolled in
22ELE2504 Electronic Design and Analysis#
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN or GEPRPre-requisite: ELE1801 or Students must be enrolled in
22ELE2704 Electricity Supply Systems
one of the following Programs: MEPR or GCEN or METCor GEPRPre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
22ELE3506 Electronic Measurement#
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENSPre-requisite: ELE1801 or Students must be enrolled in
11ELE3803 Electrical Plant#
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: (ELE1502 andELE1801) or Students must
22ELE3805 Power Electronics Principles and Applications
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
1,21,2ENM1600 Engineering Mathematics#
1,2,31,2CSC1401 Foundation Programming##
Pre-requisite: CSC1401 orStudents must be enrolled in
1,2,31CSC2402 Object-Oriented Programming in C++
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTN
22MEC3204 Production Engineering1,2,31,2ENG2002 Technology, Sustainability and Society1,31,3ENG3003 Engineering Management†
HR11CHE1110 Chemistry 1^
FootnotesThis is a Pathway course. Please refer to Engineering pathways under Articulation.#Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study ofENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineeringand Sciences for further information.
*
This is a Pathway course for students intending to complete the Bachelor of Engineering (Honours) (Computer Systems Engineering). Pleaserefer to Engineering pathways under Articulation
##
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208140© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
The semester 3 offering of this course is offered in odd numbered years only.†CHE1110 Chemistry 1 has a highly recommended residential school component in external mode.^
Electrical and Electronic Engineering major part-time recommended enrolment pattern(Toowoomba and Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
On entering the Associate Degree of Engineering (Electrical and Electronic Engineering) external studentsare required to purchase a kit of tools comprising an electronic soldering iron, wire strippers, long nose pliers,diagonal cutter, safety glasses and an electronic prototyping 'breadboard'. These will first be required forELE2501 Electronic Workshop and Production and ELE1502 Electronic Circuits, and further details will beprovided on commencement of these courses. Additionally, all students enrolled in course ELE2501 ElectronicWorkshop and Production will be required to purchase an electronic kit. For external students in the courseELE2702 Electrical Measurement and Analysis, access to a digital multimeter and hook-up wire is required,together with the purchase of some electronic components.
Students who wish to complete a Pathway to another degree in Electrical and Electronic Engineering orComputer Systems Engineering or Power Engineering should seek advice from the Faculty of Health,Engineering and Sciences before enrolling in their courses.
Major study: Electrical and Electronic Engineering (Major Study Code: 15435)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
1,21ENG1003 Problem Solving in Engineering and the BuiltEnvironment
1,2,31,2ENM1500 Introductory Engineering Mathematics#*
1,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,2,31,2MEC1201 Engineering Materials
Year 2
11ELE1301 Computer Engineering11ELE1502 Electronic Circuits
Approved course (select from the approved course list)#
Pre-requisite: ENM1500 orENM1600 or Students must
2,32ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
Year 2 Practice Courses
M2,31,2ENG1901 Engineering Practice 1M32ELE1911 Electrical and Electronic Practice A
Year 3
1,21,2ENG1100 Introduction to Engineering Design
Approved course (Select from the approved course list)#
Pre-requisite: (ELE1502 andELE1301) or Students must
22ELE2501 Electronic Workshop and Production
be enrolled in the followingProgram: GCENPre-requisite: ENM1500 orENM1600 or Students must
22ELE2101 Control and Instrumentation#
be enrolled in one of the fol
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208141© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 15435)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
lowing Programs: MEPR orGCEN or GEPR
Year 3 Practice Courses
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
M31ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENS
Year 4
Pre-requisite: (ENG1500 orMAT1500 or ENM1500 or
11ELE2702 Electrical Measurement and Analysis
ENM1600) and ELE1801 orStudents must be enrolled inthe following Program: GCENPre-requisite: (ELE1502 andELE1801) or Students must
11ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETC or GEPRPre-requisite: ELE1502 or Students must be enrolled in
22ELE2503 Electronic Systems#
the following Program: GCENor GEPRPre-requisite: ENG1100 and(ENG1101 or ENG1003)
22ENG2111 Engineering Associate Degree Design Project
Year 4 Practice Courses
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
2ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENS
1,2ENG2909 Work Experience - Associate
Select approved courses from the following or other elective courses as approved by the ProgramCoordinator
22ELE2103 Linear Systems and Control#
11ELE2303 Embedded Systems Design#
Pre-requisite: ELE1502 or Students must be enrolled in
22ELE2504 Electronic Design and Analysis#
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN or GEPRPre-requisite: ELE1801 or Students must be enrolled in
22ELE2704 Electricity Supply Systems
one of the following Programs: MEPR or GCEN or METCor GEPRPre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
22ELE3506 Electronic Measurement#
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Program
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208142© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 15435)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
s: GCEN or METC or MEPRor MENSPre-requisite: ELE1801 or Students must be enrolled in
11ELE3803 Electrical Plant#
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: (ELE1502 andELE1801) or Students must
22ELE3805 Power Electronics Principles and Applications
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
1,21,2ENM1600 Engineering Mathematics#
1,2,31,2CSC1401 Foundation Programming##
Pre-requisite: CSC1401 orStudents must be enrolled in
11CSC2402 Object-Oriented Programming in C++
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTN
22MEC3204 Production Engineering1,2,31,2ENG2002 Technology, Sustainability and Society1,31,3ENG3003 Engineering Management†
HR11CHE1110 Chemistry 1^
FootnotesThis is a Pathway course. Please refer to Engineering pathways under Articulation.#Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study ofENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineeringand Sciences for further information.
*
This is a Pathway course for students intending to complete the Bachelor of Engineering (Honours) (Computer Systems Engineering). Pleaserefer to Engineering pathways under Articulation
##
The semester 3 offering of this course is offered in odd numbered years only.†CHE1110 Chemistry 1 has a highly recommended residential school component in external mode.^
Instrumentation Control and Automation Engineering major full-time recommendedenrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Students who wish to complete a Pathway to another degree in Instrumentation Control and AutomationEngineering should seek advice from the Faculty of Health, Engineering and Sciences before enrolling intheir courses.
Major study: Instrumentation Control and Automation Engineering (Major Study Code: )Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,2,31,2ENM1500 Introductory Engineering Mathematics*#
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208143© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Major study: Instrumentation Control and Automation Engineering (Major Study Code: )Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
1,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,21ENG1003 Problem Solving in Engineering and the BuiltEnvironment
Pre-requisite or Co-requisite:ENM1500 or ENG1500 orMAT1500 or ENM1600
1,31CIV1500 Applied Mechanics
1,2,31,2MEC1201 Engineering Materials1,21,2ENG1100 Introduction to Engineering Design
Pre-requisite: CIV1500 orCIV1501
2MEC1501 Introduction to Industrial Processes
Pre-requisite: ENM1500 orENM1600 or Students must
2,32ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
Practice Courses Year 1
M2,31,2ENG1901 Engineering Practice 1
Academic Courses Year 2
11ELE1301 Computer Engineering11ELE1502 Electronic Circuits11Approved course (Select from the approved course list)11Approved course (Select from the approved course list)
Pre-requisite: ENM1500 orENM1600 or Students must
22ELE2101 Control and Instrumentation
be enrolled in one of the following Programs: MEPR orGCEN or GEPRPre-requisite: CIV1500 orCIV1501 or Students must be
22MEC2106 Introduction to Thermofluids
enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENS or GEPRPre-requisite: ELE2103 or(MEC1501 and ELE2101 as
2MEC2501 Process Control Systems
Co-requisite or Pre-requisite)or Students must be enrolledin the following Program:GEPRPre-requisite: ENG1100 and(ENG1101 or ENG1003)
22ENG2111 Engineering Associate Degree Design Project
Practice Courses Year 2
M31MEC2901 Mechanical Practice 1M32ELE1911 Electrical and Electronic Practice A
1,2ENG2909 Work Experience - Associate
Select approved courses from the following or other elective courses as approved by the ProgramCoordinator
11ELE2303 Embedded Systems DesignPre-requisite: (ELE1502 andELE1301) or Students must
22ELE2501 Electronic Workshop and Production
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208144© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Major study: Instrumentation Control and Automation Engineering (Major Study Code: )Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
be enrolled in the followingProgram: GCENPre-requisite: ELE1502 or Students must be enrolled in
22ELE2504 Electronic Design and Analysis
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN or GEPRPre-requisite: (ELE1502 andELE1801) or Students must
11ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETC or GEPR
22ELE3107 Signal ProcessingPre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
22ELE3506 Electronic Measurement
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENSPre-requisite: (ELE1502 andELE1801) or Students must
22ELE3805 Power Electronics Principles and Applications
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: MEC1201 orStudents must be enrolled in
11MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCENPre-requisite: (MEC2402 andENG1100) or Students must
22MEC2301 Design of Machine Elements
be enrolled in one of the following Programs: MEPR orGCEN or GEPRPre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: CIV1501 or Students must be enrolled inthe following Program: GCEN
11MEC2405 Machine Dynamics
22MEC3204 Production Engineering1,2,31CSC1401 Foundation Programming
Pre-requisite: CSC1401 orStudents must be enrolled in
11CSC2402 Object-Oriented Programming in C++
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTN
HR11CHE1110 Chemistry 1^
Pre-requisite: CHE1110HR22CHE2120 Chemistry 2^
1,21ENM1600 Engineering Mathematics
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208145© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Major study: Instrumentation Control and Automation Engineering (Major Study Code: )Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,32CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
FootnotesStudents who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study ofENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineeringand Sciences for further information.
*
This is a Pathway course. Please refer to Engineering pathways under Articulation.#Chemistry courses have a highly recommended residential school component in external mode.^
Instrumentation Control and Automation Engineering major part-time recommendedenrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Students who wish to complete a Pathway to another degree in Instrumentation Control and AutomationEngineering should seek advice from the Faculty of Health, Engineering and Sciences before enrolling intheir courses.
Major study: Instrumentation Control and Automation Engineering (Major Study Code: )Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,2,31,2ENM1500 Introductory Engineering Mathematics*#
1,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,21ENG1003 Problem Solving in Engineering and the BuiltEnvironment
1,2,31,2MEC1201 Engineering Materials
Academic Courses Year 2
Pre-requisite or Co-requisite:ENM1500 or ENG1500 orMAT1500 or ENM1600
1,31CIV1500 Applied Mechanics
1,21,2ENG1100 Introduction to Engineering DesignPre-requisite: CIV1500 orCIV1501
2MEC1501 Introduction to Industrial Processes
Pre-requisite: ENM1500 orENM1600 or Students must
2,32ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
Practice Courses Year 2
M2,31,2ENG1901 Engineering Practice 1
Academic Courses Year 3
11ELE1301 Computer Engineering11ELE1502 Electronic Circuits
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208146© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Major study: Instrumentation Control and Automation Engineering (Major Study Code: )Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: ENM1500 orENM1600 or Students must
22ELE2101 Control and Instrumentation
be enrolled in one of the following Programs: MEPR orGCEN or GEPRPre-requisite: CIV1500 orCIV1501 or Students must be
22MEC2106 Introduction to Thermofluids
enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENS or GEPR
Practice Courses Year 3
M31MEC2901 Mechanical Practice 1M32ELE1911 Electrical and Electronic Practice A
Academic Courses Year 4
11Approved course (Select from the approved course list)11Approved course (Select from the approved course list)
Pre-requisite: ELE2103 or(MEC1501 and ELE2101 as
2MEC2501 Process Control Systems
Co-requisite or Pre-requisite)or Students must be enrolledin the following Program:GEPRPre-requisite: ENG1100 and(ENG1101 or ENG1003)
22ENG2111 Engineering Associate Degree Design Project
Practice Courses Year 4
1,2ENG2909 Work Experience - Associate
Select approved courses from the following or other elective courses as approved by the ProgramCoordinator
11ELE2303 Embedded Systems DesignPre-requisite: (ELE1502 andELE1301) or Students must
22ELE2501 Electronic Workshop and Production
be enrolled in the followingProgram: GCENPre-requisite: ELE1502 or Students must be enrolled in
22ELE2504 Electronic Design and Analysis
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN or GEPRPre-requisite: (ELE1502 andELE1801) or Students must
11ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETC or GEPR
22ELE3107 Signal ProcessingPre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
22ELE3506 Electronic Measurement
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENS
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208147© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Major study: Instrumentation Control and Automation Engineering (Major Study Code: )Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: (ELE1502 andELE1801) or Students must
22ELE3805 Power Electronics Principles and Applications
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: MEC1201 orStudents must be enrolled in
11MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCENPre-requisite: (MEC2402 andENG1100) or Students must
22MEC2301 Design of Machine Elements
be enrolled in one of the following Programs: MEPR orGCEN or GEPRPre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: CIV1501 or Students must be enrolled inthe following Program: GCEN
11MEC2405 Machine Dynamics
22MEC3204 Production Engineering1,2,31CSC1401 Foundation Programming
Pre-requisite: CSC1401 orStudents must be enrolled in
11CSC2402 Object-Oriented Programming in C++
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTN
HR11CHE1110 Chemistry 1^
Pre-requisite: CHE1110HR22CHE2120 Chemistry 2^
1,21ENM1600 Engineering MathematicsPre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,32CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
FootnotesStudents who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study ofENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineeringand Sciences for further information.
*
This is a Pathway course. Please refer to Engineering pathways under Articulation.#Chemistry courses have a highly recommended residential school component in external mode.^
Mechanical Engineering major full-time recommended enrolment pattern (Toowoombaand Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208148© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Students who wish to complete a Pathway to another degree in Mechanical Engineering should seek advicefrom the Faculty of Health, Engineering and Sciences before enrolling in their courses.
Major study: Mechanical Engineering (Major Study Code: 15437)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
Academic Courses
1,211ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,211ENG1003 Problem Solving in Engineering and the BuiltEnvironment
1,211ENM1500 Introductory Engineering Mathematics*#
Pre-requisite or Co-requisite:ENM1500 or ENG1500 orMAT1500 or ENM1600
1,311CIV1500 Applied Mechanics
Practice Courses
M2,311ENG1901 Engineering Practice 1M311MEC2901 Mechanical Practice 1
Academic Courses
1,221ENG1100 Introduction to Engineering Design1,2,321MEC1201 Engineering Materials
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,321CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
221Approved course (select from the approved course list)#
Year 2
Academic Courses
1,212ENM1600 Engineering MathematicsPre-requisite: MEC1201 orStudents must be enrolled in
112MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCENPre-requisite: CIV1501 or Students must be enrolled in
112MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: CIV1501 or Students must be enrolled inthe following Program: GCEN
112MEC2405 Machine Dynamics
Practice Courses
M112MEC2902 Mechanical Practice 21,2ENG2909 Work Experience - Associate
Academic Courses
Pre-requisite: CIV1500 orCIV1501 or Students must be
222MEC2106 Introduction to Thermofluids
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208149© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Major study: Mechanical Engineering (Major Study Code: 15437)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENS or GEPRPre-requisite: ENM1500 orENM1600 or Students must
2,322ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPRPre-requisite: (MEC2402 andENG1100) or Students must
222MEC2301 Design of Machine Elements
be enrolled in one of the following Programs: MEPR orGCEN or GEPRPre-requisite: ENG1100 and(ENG1101 or ENG1003)
222ENG2111 Engineering Associate Degree Design Project
Practice Courses
M322MEC3903 Mechanical Practice 3
Select approved courses from the following or other elective courses as approved by the ProgramCoordinator
22MEC2304 Solid Modelling#
22MEC3204 Production EngineeringPre-requisite: (MEC2106 andENM1600) or Students must
11MEC3107 Thermofluids
be enrolled in one of the following Programs: GCNS orGDNS or MENS Studentscannot enrol in MEC3107 ifthey have successfully completed, or are currently enrolled in, MEC2101 orMEC3102Pre-requisite: (ENG1100 andMEC2402) or (ENG1100 and
22CIV2503 Structural Design I
CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in: GCEN or GEPR
22CIV2502 Structural and Building Technology11AGR2302 Agricultural Machinery
FootnotesStudents who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study ofENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics and consequently the study of ENM1600 EngineeringMathematics with an additional Approved course. Please contact the Faculty of Health, Engineering and Sciences for further information.
*
This is a Pathway course. Please refer to Engineering pathways under Articulation.#
Mechanical Engineering major part-time recommended enrolment pattern (Toowoombaand Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208150© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Students who wish to complete a Pathway to another degree in Mechanical Engineering should seek advicefrom the Faculty of Health, Engineering and Sciences before enrolling in their courses.
Major study: Mechanical Engineering (Major Study Code: 15437)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
Academic Courses
1,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,21ENG1003 Problem Solving in Engineering and the BuiltEnvironment
1,21,2ENG1100 Introduction to Engineering Design1,2,31,2MEC1201 Engineering Materials
Year 2
Academic Courses
1,2,31,2ENM1500 Introductory Engineering Mathematics*#
Pre-requisite or Co-requisite:ENM1500 or ENG1500 orMAT1500 or ENM1600
1,31CIV1500 Applied Mechanics
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,32CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
Approved course (select from the approved course list)#
Practice Courses
M2,31,2ENG1901 Engineering Practice 1
Year 3
Academic Courses
1,21,2ENM1600 Engineering MathematicsPre-requisite: MEC1201 orStudents must be enrolled in
11MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCENPre-requisite: CIV1500 orCIV1501 or Students must be
22MEC2106 Introduction to Thermofluids
enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENS or GEPRPre-requisite: ENM1500 orENM1600 or Students must
2,32ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
Practice Courses
M31MEC2901 Mechanical Practice 1
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208151© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Major study: Mechanical Engineering (Major Study Code: 15437)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 4
Academic Courses
Pre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: CIV1501 or Students must be enrolled inthe following Program: GCEN
11MEC2405 Machine Dynamics
Practice Courses
1,2ENG2909 Work Experience - Associate
Academic Courses
Pre-requisite: (MEC2402 andENG1100) or Students must
22MEC2301 Design of Machine Elements
be enrolled in one of the following Programs: MEPR orGCEN or GEPRPre-requisite: ENG1100 and(ENG1101 or ENG1003)
22ENG2111 Engineering Associate Degree Design Project
Practice Courses
M11MEC2902 Mechanical Practice 2M32MEC3903 Mechanical Practice 3
Select approved courses from the following or other elective courses as approved by the ProgramCoordinator
22MEC2304 Solid Modelling#
22MEC3204 Production EngineeringPre-requisite: (MEC2106 andENM1600) or Students must
11MEC3107 Thermofluids
be enrolled in one of the following Programs: GCNS orGDNS or MENS Studentscannot enrol in MEC3107 ifthey have successfully completed, or are currently enrolled in, MEC2101 orMEC3102Pre-requisite: (ENG1100 andMEC2402) or (ENG1100 and
22CIV2503 Structural Design I
CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in: GCEN or GEPR
22CIV2502 Structural and Building Technology11AGR2302 Agricultural Machinery
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208152© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
FootnotesStudents who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study ofENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics and consequently the study of ENM1600 EngineeringMathematics with an additional Approved course. Please contact the Faculty of Health, Engineering and Sciences for further information.
*
This is a Pathway course. Please refer to Engineering pathways under Articulation.#
Mining Engineering major full-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Students who wish to complete a Pathway to another degree in Civil Engineering should seek advice fromthe Faculty of Health, Engineering and Sciences before enrolling in their courses.
Major study: Mining Engineering (Major study code: 17046)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,211ENM1500 Introductory Engineering Mathematics#*
Pre-requisite or Co-requisite:ENM1500 or ENG1500 orMAT1500 or ENM1600
1,311CIV1500 Applied Mechanics
1,211ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,211ENG1003 Problem Solving in Engineering and the BuiltEnvironment
221SVY1500 Spatial Science for Engineers1,2,321MEC1201 Engineering Materials
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,321CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
2,321Approved course (Select from the approved course list)#
Practice Courses Year 1
M2,311ENG1901 Engineering Practice 1
Academic Courses Year 2
112CIV2605 Construction Engineering1MIN2001 Mining Technology and Mineral Processing112ENG1100 Introduction to Engineering Design112Approved course (select from the approved course list)#
Pre-requisite: CIV1501 orCIV1500 or Students must be
222CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPRPre-requisite or Co-requisite:SVY1500
2MIN2003 Mine Operations and Management
2MIN2002 Mine Planning and DesignPre-requisite: ENG1100 and(ENG1101 or ENG1003)
222ENG2111 Engineering Associate Degree Design Project
Practice Courses Year 2
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,322CIV2901 Geology and Geomechanics Practice
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208153© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Major study: Mining Engineering (Major study code: 17046)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
M332MIN2901 Mining Practice<
1,2ENG2909 Work Experience - Associate
Select approved courses from the following or other elective courses as approved by the ProgramCoordinator
MINAD Approved Courses (taken through Central Queensland University (CQU) viacross-institutional enrolment)
1ENAR12004 Mine Management and Safety1ENAR12006 Rock Engineering2ENAR11001 Resource Geology
USQ Approved Courses
1,2,32ENG2002 Technology, Sustainability and Society#
Pre-requisite: CIV1500 orCIV1501 or Students must be
11ENV2103 Hydraulics I#
enrolled in the following Program: GCEN or GEPR
11ENV2201 Land Studies22ENV3105 Hydrology#
1,31GIS1402 Geographic Information SystemsPre-requisite: CIV1500 orCIV1501
22MEC1501 Introduction to Industrial Processes
11MGT2001 Risk Mitigation, Work Health and Safety22SVY1110 Introduction to Global Positioning System11SVY3202 Photogrammetry and Remote Sensing
FootnotesThis is a Pathway course. Please refer to Engineering pathways under Articulation.#Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study ofENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineeringand Sciences for further information.
*
offered in Semester 3 in odd years only e.g. 2019, 2021 etc<
Mining Engineering major part-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Students who wish to complete a Pathway to another degree in Civil Engineering should seek advice fromthe Faculty of Health, Engineering and Sciences before enrolling in their courses.
Major study: Mining Engineering (Major study code: 17046)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
1,2,31,2ENM1500 Introductory Engineering Mathematics#*
Pre-requisite or Co-requisite:ENM1500 or ENG1500 orMAT1500 or ENM1600
1,31CIV1500 Applied Mechanics
22SVY1500 Spatial Science for Engineers
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208154© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Major study: Mining Engineering (Major study code: 17046)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
1,2,31,2MEC1201 Engineering Materials
Year 2
1,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,21ENG1003 Problem Solving in Engineering and the BuiltEnvironment
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,32CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
Approved course (Select from the approved course list)#
Year 2 Practice Courses
M2,31,2ENG1901 Engineering Practice 1
Year 3
11CIV2605 Construction Engineering1MIN2001 Mining Technology and Mineral Processing
Pre-requisite: CIV1501 orCIV1500 or Students must be
22CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPRPre-requisite or Co-requisite:SVY1500
2MIN2003 Mine Operations and Management
Year 3 Practice Courses
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,32CIV2901 Geology and Geomechanics Practice
M3MIN2901 Mining Practice<
Year 4
1,21,2ENG1100 Introduction to Engineering Design
Approved course (select from the approved course list)#
2MIN2002 Mine Planning and DesignPre-requisite: ENG1100 and(ENG1101 or ENG1003)
22ENG2111 Engineering Associate Degree Design Project
Year 4 Practice Courses
1,2ENG2909 Work Experience - Associate
Select approved courses from the following or other elective courses as approved by the ProgramCoordinator
MINAD Approved Courses (taken through Central Queensland University (CQU) viacross-institutional enrolment)
1ENAR12004 Mine Management and Safety1ENAR12006 Rock Engineering2ENAR11001 Resource Geology
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208155© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Major study: Mining Engineering (Major study code: 17046)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
USQ Approved Courses
1,2,31,2ENG2002 Technology, Sustainability and Society#
Pre-requisite: CIV1500 orCIV1501 or Students must be
11ENV2103 Hydraulics I#
enrolled in the following Program: GCEN or GEPR
11ENV2201 Land Studies22ENV3105 Hydrology#
1,31GIS1402 Geographic Information SystemsPre-requisite: CIV1500 orCIV1501
2MEC1501 Introduction to Industrial Processes
11MGT2001 Risk Mitigation, Work Health and Safety22SVY1110 Introduction to Global Positioning System11SVY3202 Photogrammetry and Remote Sensing
FootnotesThis is a Pathway course. Please refer to Engineering pathways under Articulation.#Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study ofENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineeringand Sciences for further information.
*
offered in Semester 3 in odd years only e.g. 2019, 2021 etc<
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208156© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Engineering (ADNG) - AssocDegEng (2022)
Associate Degree of Spatial Science (ADSS) - AssocDegSpScQTAC code (Australian and New Zealand applicants): Surveying (Springfield campus: 927061); (Toowoombacampus: 907062; External: 907065)
CRICOS code (International applicants): 053510F
External^@*On-campus^*
Semester 1 (February)Semester 2 (July)
Semester 1 (February)Semester 2 (July)
Start:
-Springfield, ToowoombaCampus:
Commonwealth supported placeCommonwealth supported placeFees:Domestic full fee paying placeDomestic full fee paying placeInternational full fee paying placeInternational full fee paying place
Springfield, ToowoombaResidential school:
2 years full-time, 4 years part-timeStandard duration:
To: Bachelor of Spatial Science Technology; Bachelor of Spatial Science (Honours);Bachelor of Urban and Regional Planning (Honours)
Programarticulation:
FootnotesAvailability of majors: Geographic Information Systems — on-campus at USQ Toowoomba and external; Surveying — on-campus at USQToowoomba, USQ Springfield, and external; Urban and Regional Planning — on-campus at USQ Toowoomba and external.
^
The Urban and Regional Planning major articulates fully to the ; Bachelor of Urban and Regional Planning (Honours). With the possibleexception of a couple of courses, the other majors articulate to the ; Bachelor of Spatial Science Technology and the ; Bachelor of Spatial Science(Honours).
*
International overseas students are advised against studying this program, as it contains mandatory residential schools. External students mustbe able to attend mandatory residential schools at a USQ campus.
@
Contact us
Current studentsFuture International studentsFuture Australian and NewZealand students
Ask a questionFreecall (within Australia): 1800007 252Phone (from outside Australia): +617 4631 2285Email [email protected]
Ask a questionPhone: +61 7 4631 5543Email: [email protected]
Ask a questionFreecall (within Australia): 1800269 500Phone (from outside Australia): +617 4631 5315Email: [email protected]
Professional accreditationThe Associate Degree of Spatial Science (Surveying) is accredited by the Surveyors Board of Queenslandand graduates may seek registration with the Board of Surveyors.
Graduates from the GIS and Surveying majors in the Associate Degree of Spatial Science are eligible to applyfor membership with the Surveying and Spatial Sciences Institute Australia.
Program aimsThe Associate Degree of Spatial Science program provides students with the theory, methods and practicesrequired by an associate to support a practising professional spatial scientist. To this end the program providesstudents with a general understanding of the broad practice and knowledge in the spatial science professionand the technical skills to work in one of three fields: Geographic Information Systems (GIS), Surveying orUrban and Regional Planning.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208157© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Spatial Science (ADSS) - AssocDegSpSc (2022)
Program objectivesA student who successfully completes the Associate Degree of Spatial Science should be able to:
● display a broad range of theoretical and technical knowledge, including the underlying principles andconcepts fundamental to spatial science
● identify, analyse and evaluate information in order to solve technical problems within a limited rangeand context of spatial science
● collect, store, adapt and manipulate spatial data to communicate effectively with a range of audiencesincluding professionals, para-professionals, clients and the wider community
● exercise appropriate judgement when identifying and responding to cultural, ethical, environmental andsocial issues
● adapt to change, master new techniques and the skills required to process information and pathway toundertake further learning and study
Australian Qualifications FrameworkThe Australian Qualifications Framework (AQF) is a single national, comprehensive system of qualificationsoffered by higher education institutions (including universities), vocational education and training institutionsand secondary schools. Each AQF qualification has a set of descriptors which define the type and complexityof knowledge, skills and application of knowledge and skills that a graduate who has been awarded thatqualification has attained, and the typical volume of learning associated with that qualification type.
This program is at AQF Qualification Level 06. Graduates at this level will have broad knowledge and skillsfor paraprofessional/highly skilled work and/or further learning.
The full set of levels criteria and qualification type descriptors can be found by visiting www.aqf.edu.au.
Program Information SetView USQ’s admission criteria, student profiles and a summary of all offers made under Course AdmissionInformation Set via the QTAC website.
Admission requirementsTo be eligible for admission, applicants must satisfy the following requirements:
● Have achieved a minimum Australian Tertiary Admission Rank (ATAR) of 62.7, or equivalentqualification.^
● English Language Proficiency requirements for Category 2.
Applicants are advised to also note the following:
● Assumed knowledge expectations: English; General Mathematics● Recommended Prior Study: Mathematical Methods (Units 3 & 4, C) or equivalent.
All students are required to satisfy the applicable English language requirements.
If students do not meet the English language requirements they may apply to study a University-approvedEnglish language program. On successful completion of the English language program, students may beadmitted to an award program.
These are determined by the University for specific programs each Semester. The 2021 ATAR andtertiary entrance ranks are based on agreed QTAC schedules which assess formal study at Year 12 or
^
equivalent level, tertiary, preparatory, professional or vocational qualifications or work experience, asdetailed in the QTAC Assessment of Qualifications Manual and QTAC Assessor Guidelines.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208158© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Spatial Science (ADSS) - AssocDegSpSc (2022)
Adjustment factors may help you get into the program of your choice by increasing your entrance rank.The additional points don't apply to all applicants or all programs. Please read the information aboutUSQ's Adjustment Factors carefully to find out what you may be eligible for.
Program fees
Commonwealth supported placeA Commonwealth supported place is where the Australian Government makes a contribution towards the costof a students' higher education and students pay a student contribution amount, which varies depending onthe courses undertaken. Students are able to calculate the fees for a particular course via the Course FeeSchedules.
Commonwealth Supported students may be eligible to defer their fees through a Government loan calledHECS-HELP.
Domestic full fee paying placeDomestic full fee paying places are funded entirely through the full fees paid by the student. Full fees varydepending on the courses that are taken. Students are able to calculate the fees for a particular course via theCourse Fee Schedule
Domestic full fee paying students may be eligible to defer their fees through a Government loan called FEE-HELP provided they meet the residency and citizenship requirements.
Australian citizens, Permanent Humanitarian Visa holders, Permanent Resident visa holders and New Zealandcitizens who will be resident outside Australia for the duration of their program pay full tuition fees and arenot eligible for FEE-Help.
International full fee paying placeInternational students pay full fees. Full fees vary depending on the courses that are taken and whether theyare studied on-campus, via distance education/online. Students are able to calculate the fees for a particularcourse via the Course Fee Schedules.
Program structureThe Associate Degree of Spatial Science program consists of 16 Academic courses and two or three Practicecourses, depending upon major (Geographic Information Systems, Surveying or Urban and Regional Planning).
Academic courses are one-unit courses and involve approximately 155 hours of student work per unit.
Practice courses are zero unit courses and each involves approximately 50 hours of student work.
Required time limitsStudents have a maximum of 6 years to complete this program.
Electives/Approved coursesApproved courses are part of the academic program and students should select approved courses from the listprovided.
Practice coursesThe major practical work requirements associated with each of the Engineering and Built Environmentprograms are contained within a series of Practice courses. These courses are designed to enhance learning,communication and practical skills through laboratory sessions, workshops, seminars, field trips and groupactivities.
Practical experienceWork experience is desirable and encouraged but is not required for the completion of the Associate Degreeof Spatial Science. Students are encouraged to obtain work experience during vacation periods.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208159© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Spatial Science (ADSS) - AssocDegSpSc (2022)
IT requirementsAccess to an up-to-date computer is necessary. On-campus students can access appropriately equippedlaboratories, but should consider acquisition of their own computer. External students should be able to accessa computer with the following minimum standards as advised by the University. All students should haveaccess to email and the Internet via a computer running the latest versions of Internet web browsers such asInternet Explorer or Firefox. The University has a wireless network for on-campus students' computers. Inorder to take advantage of this facility and further enhance their on-campus learning environment, studentsshould consider purchasing a notebook/laptop computer with wireless connectivity. Specialist software isrequired for some courses.
Residential schoolsThe attendance requirement of residential schools within this degree is indicated by the following letters: R= Recommended; HR = Highly Recommended; M = Mandatory. To find out more about residential schools,visit the Residential School Schedule to view specific dates for your degree, or visit the Policy and ProcedureLibrary.
Students are required to undertake practical and professional activities relevant to their program throughenrolment in a series of Practice courses in the program. Practice courses are zero unit courses that may beundertaken in either on-campus or external mode and the final grades available are Pass (P)/Fail (F) only.They are a compulsory part of the program and do not attract a student contribution charge for Australianresidents or a tuition fee for international students. The recommended enrolment schedule for Practice coursesis shown in the Recommended Enrolment Pattern for the program in this Handbook.
External students must attend a number of residential schools during their program to obtain experience inpractical and professional activities appropriate to the program. The residential schools are included in Practicecourses which are conducted in Semester 3 or during the recess periods. The dates for each residential schoolPractice course are shown in the Residential School Schedule in this Handbook and external students shouldensure they are able to attend the residential school prior to enrolling in a Practice course. Personal protectiveequipment is compulsory in many engineering, construction and spatial science laboratories, students shouldconfirm the requirements before attending residential schools for Practice courses.
Students who enrol in on-campus mode for Practice courses normally undertake a series of weekly activitiesand/or attend a compulsory residential school.
Geographic Information Systems
● SVY1901 Surveying and Spatial Science Practice 1● GPL2901 GIS and Planning Practice 1
Surveying
● SVY1901 Surveying and Spatial Science Practice 1● SVY2902 Surveying and Spatial Science Practice 2● SVY2903 Surveying and Spatial Science Practice 3
Urban and Regional Planning
● SVY1901 Surveying and Spatial Science Practice 1● GPL2901 GIS and Planning Practice 1
ArticulationThe Urban and Regional Planning major articulates fully to the Bachelor of Urban and Regional Planning(Honours). With the possible exception of a couple of courses, the other majors articulate to the Bachelor ofSpatial Science Technology and the Bachelor of Spatial Science (Honours).
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208160© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Spatial Science (ADSS) - AssocDegSpSc (2022)
Exit pointsStudents who, for whatever reason, are unable to complete the Associate Degree of Spatial Science and whosatisfy all of the requirements of the Diploma of Engineering Studies may be permitted to exit with that award.
CreditExemptions/credit will be assessed based on the USQ Credit and Exemption Procedure.
Work Experience
Work and industrial experience that has not been formally assessed, does not normally qualify for coursecredit in the Associate Degree of Spatial Science program.
Geographic Information Systems major recommended full-time enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
Major study: Geographic Information Systems (Major Study Code: 15409)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses, Year 1
Year 1, Semester 1
1,211ENM1500 Introductory Engineering Mathematics*
1,311GIS1402 Geographic Information Systems111SVY1102 Surveying A111ENG1003 Problem Solving in Engineering and the Built
Environment
Year 1, Semester 2
221GIS1401 Geographic Data Presentation1,221ENG1002 Introduction to Engineering and Built
Environment Applications221SVY1110 Introduction to Global Positioning System1,221CSC1401 Foundation Programming
Practice Course, Year 1
M1211SVY1901 Surveying and Spatial Science Practice 1
Academic Courses, Year 2
Year 2, Semester 1
112ENV2201 Land Studies112SVY3202 Photogrammetry and Remote Sensing
Pre-requisite: GIS1402 andCSC1401 or Students must
112GIS3407 GIS Programming and Visualisation#
be enrolled in one of the following Programs: GDST orMSST or GCST or MENS orMSPT
112Approved Course (Select from the Approved Courses list)
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208161© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Spatial Science (ADSS) - AssocDegSpSc (2022)
Major study: Geographic Information Systems (Major Study Code: 15409)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 2, Semester 2
222Approved Course (Select from the Approved Courses list)222Approved Course (Select from the Approved Courses list)222SVY3302 Property Valuation and Development222GIS3405 Spatial Analysis and Modelling
Practice Course, Year 2
Pre-requisite: (GIS1401 andGIS1402) or (URP2001) or
M33GPL2901 GIS and Planning Practice 1
(Students must be enrolledin one of the following Programs: GCNS or GDNS orMENS)
Approved Courses (Select 3 courses from the following)
1,2,31,2ACC1101 Accounting for Decision-Making22AGR2301 Agricultural Science
Pre-requisite: CSC1401 orCIS1000 Enrolment is not
1,31CSC3400 Database Systems
permitted in CSC3400 ifCIS2002 has been previouslycompleted.Pre-requisite: GIS1402 or Students must be enrolled in
22GIS4407 Web Based Geographic Information System
one of the following Programs: GCST or GDST or MSSTor MSPT or GCNS or GDNSor MENS
1,2,31,2ENG2002 Technology, Sustainability and Society1,21ENM1600 Engineering Mathematics
Enrolment is not permitted inREN1201 if REN8101 hasbeen previously completed.
11REN1201 Environmental Studies<
1,2,31MKT1001 Introduction to Marketing22GIS3406 Remote Sensing and Image Processing
Pre-requisite: SVY1102 orSVY1500 or Students must
22SVY1104 Survey Computations A
be enrolled in one of the following Programs: GCST orGDST or MSPT
11URP1001 Introduction to Urban and Regional Planning22URP2002 Local Government Planning Practice and
Technology#
FootnotesStudents who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study ofENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics.
*
Unavailable in on-campus mode in 2022#Unavailable in on-campus mode at Springfield in 2022<
Geographic Information Systems major recommended part-time enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208162© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Spatial Science (ADSS) - AssocDegSpSc (2022)
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
Major study: Geographic Information Systems (Major Study Code: 15409)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses, Years 1-2
Year 1, Semester 1
1,211ENM1500 Introductory Engineering Mathematics*
1,311GIS1402 Geographic Information Systems
Year 1, Semester 2
221GIS1401 Geographic Data Presentation1,221ENG1002 Introduction to Engineering and Built
Environment Applications
Year 2, Semester 1
112SVY1102 Surveying A112ENG1003 Problem Solving in Engineering and the Built
Environment
Year 2, Semester 2
222SVY1110 Introduction to Global Positioning System1,222CSC1401 Foundation Programming
Practice Course, Year 1 or 2
M112SVY1901 Surveying and Spatial Science Practice 1
Academic Courses, Years 3-4
Year 3, Semester 1
113ENV2201 Land Studies113SVY3202 Photogrammetry and Remote Sensing
Year 3, Semester 2
223Approved Course (Select from the Approved Courses list)223SVY3302 Property Valuation and Development
Year 4, Semester 1
Pre-requisite: GIS1402 andCSC1401 or Students must
114GIS3407 GIS Programming and Visualisation#
be enrolled in one of the following Programs: GDST orMSST or GCST or MENS orMSPT
114Approved Course (Select from the Approved Courses list)
Year 4, Semester 2
224Approved Course (Select from the Approved Courses list)224GIS3405 Spatial Analysis and Modelling
Practice Course, Year 3 or 4
Pre-requisite: (GIS1401 andGIS1402) or (URP2001) or
M33GPL2901 GIS and Planning Practice 1
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208163© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Spatial Science (ADSS) - AssocDegSpSc (2022)
Major study: Geographic Information Systems (Major Study Code: 15409)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
(Students must be enrolledin one of the following Programs: GCNS or GDNS orMENS)
Approved Courses (Select 3 courses from the following)
1,2,31,2ACC1101 Accounting for Decision-Making22AGR2301 Agricultural Science
Pre-requisite: CSC1401 orCIS1000 Enrolment is not
1,31CSC3400 Database Systems
permitted in CSC3400 ifCIS2002 has been previouslycompleted.Pre-requisite: GIS1402 or Students must be enrolled in
22GIS4407 Web Based Geographic Information System
one of the following Programs: GCST or GDST or MSSTor MSPT or GCNS or GDNSor MENS
1,2,31,2ENG2002 Technology, Sustainability and Society1,21ENM1600 Engineering Mathematics
Enrolment is not permitted inREN1201 if REN8101 hasbeen previously completed.
11REN1201 Environmental Studies<
1,2,31MKT1001 Introduction to Marketing22GIS3406 Remote Sensing and Image Processing
Pre-requisite: SVY1102 orSVY1500 or Students must
22SVY1104 Survey Computations A
be enrolled in one of the following Programs: GCST orGDST or MSPT
11URP1001 Introduction to Urban and Regional Planning22URP2002 Local Government Planning Practice and
Technology#
FootnotesStudents who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study ofENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics.
*
Unavailable in on-campus mode in 2022#Unavailable in on-campus mode at Springfield in 2022<
Surveying major recommended full-time enrolment pattern (Toowoomba andSpringfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external students
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208164© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Spatial Science (ADSS) - AssocDegSpSc (2022)
for our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
Major study: Surveying (Major Study Code: 15410)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses, Year 1
Year 1, Semester 1
1,211ENM1500 Introductory Engineering Mathematics*
1,311GIS1402 Geographic Information Systems111SVY1102 Surveying A111ENG1003 Problem Solving in Engineering and the Built
Environment
Year 1, Semester 2
1,221ENG1002 Introduction to Engineering and BuiltEnvironment Applications
221SVY1110 Introduction to Global Positioning System221GIS1401 Geographic Data Presentation
Pre-requisite: SVY1102 orSVY1500 or Students must
221SVY1104 Survey Computations A
be enrolled in one of the following Programs: GCST orGDST or MSPT
Practice Course, Year 1
M1211SVY1901 Surveying and Spatial Science Practice 1
Academic Courses, Year 2
Year 2, Semester 1
Pre-requisite: SVY1104 or Students must be enrolled in
112SVY2301 Automated Surveying Systems
one of the following Programs: GCST or GDST or MSPTPre-requisite: SVY1110 andSVY1102 or Students must
112SVY2106 Geodetic Surveying A<
be enrolled in one of the following Programs: GCNS orGCST or GDNS or GDST orMSST or MSPT or MENS
112SVY3202 Photogrammetry and Remote SensingPre-requisite: SVY1104 or Students must be enrolled in
112SVY2302 Mine Surveying
one of the following Programs: GCNS or GCST or GDNSor GDST or MSPT
Year 2, Semester 2
222Approved Course (Select from the Approved Courses list)Pre-requisite: SVY1104222SVY2303 Construction Surveying
222Approved Course (Select from the Approved Courses list)
Choose one of the following two courses:
Pre-requisite: (SVY1102 andSVY1104) or Students must
222SVY3304 Cadastral Surveying (Queensland)^^
be enrolled in one of the fol
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208165© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Spatial Science (ADSS) - AssocDegSpSc (2022)
Major study: Surveying (Major Study Code: 15410)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
lowing Programs: GCNS orGCST or GDNS or GDST orMSST or MSPT or MENSPre-requisite: (SVY1102 andSVY1104) or Students must
2SVY3306 Cadastral Surveying (New South Wales)^^
be enrolled in one of the following Programs: GCNS orGCST or GDNS or GDST orMSST or MENS
Practice Courses, Year 2
Pre-requisite: SVY1901 andSVY1104 and SVY1110 andGIS1401
M3312SVY2902 Surveying and Spatial Science Practice 2
Pre-requisite: SVY1901 andSVY2301 and SVY2106 andSVY3202
M3422SVY2903 Surveying and Spatial Science Practice 3
Approved Courses (Select from the following)
Pre-requisite: (SVY1102 andSVY1104) or Students must
222SVY3304 Cadastral Surveying (Queensland)**
be enrolled in one of the following Programs: GCNS orGCST or GDNS or GDST orMSST or MSPT or MENSPre-requisite: (SVY1102 andSVY1104) or Students must
2SVY3306 Cadastral Surveying (New South Wales)**
be enrolled in one of the following Programs: GCNS orGCST or GDNS or GDST orMSST or MENS
11CIV2605 Construction EngineeringPre-requisite: MAT1500 orENG1500 or ENM1500 or
11CIV2701 Road Design and Location
ENM1600 or Students mustbe enrolled in one of the following Programs: GCST orGDST or GCEN or GEPRPre-requisite: SVY1110 andSVY2105 or Students must
22SVY3107 Geodetic Surveying B
be enrolled in one of the following Programs: GCNS orGCST or GDNS or GDST orMSST or MSPT
22URP2002 Local Government Planning Practice and
Technology#
11ENV2201 Land Studies1,21ENM1600 Engineering Mathematics
Enrolment is not permitted inREN1201 if REN8101 hasbeen previously completed.
11REN1201 Environmental Studies>
22SVY3302 Property Valuation and Development11URP1001 Introduction to Urban and Regional Planning22URP3201 Sustainable Urban Design and Development22GIS3405 Spatial Analysis and Modelling
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208166© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Spatial Science (ADSS) - AssocDegSpSc (2022)
FootnotesStudents who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study ofENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics.
*
Unavailable in on-campus mode at Toowoomba campus in 2022<Students should study the course appropriate to their intended jurisdiction of practice.^^The alternative to the previously completed Cadastral core course may be taken as an elective/approved course.**Unavailable in on-campus mode in 2022#Unavailable in on-campus mode at Springfield in 2022>
Surveying major recommended part-time enrolment pattern (Toowoomba andSpringfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
Major study: Surveying (Major Study Code: 15410)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses, Years 1-2
Year 1, Semester 1
1,211ENM1500 Introductory Engineering Mathematics*
1,311GIS1402 Geographic Information Systems
Year 1, Semester 2
1,221ENG1002 Introduction to Engineering and BuiltEnvironment Applications
221SVY1110 Introduction to Global Positioning System
Year 2, Semester 1
112SVY1102 Surveying A112ENG1003 Problem Solving in Engineering and the Built
Environment
Year 2, Semester 2
222GIS1401 Geographic Data PresentationPre-requisite: SVY1102 orSVY1500 or Students must
222SVY1104 Survey Computations A
be enrolled in one of the following Programs: GCST orGDST or MSPT
Practice Course, Year 1 or 2
M112SVY1901 Surveying and Spatial Science Practice 1
Academic Courses, Years 3-4
Year 3, Semester 1
Pre-requisite: SVY1104 or Students must be enrolled in
113SVY2301 Automated Surveying Systems
one of the following Programs: GCST or GDST or MSPTPre-requisite: SVY1110 andSVY1102 or Students must
113SVY2106 Geodetic Surveying A<
be enrolled in one of the fol
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208167© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Spatial Science (ADSS) - AssocDegSpSc (2022)
Major study: Surveying (Major Study Code: 15410)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
lowing Programs: GCNS orGCST or GDNS or GDST orMSST or MSPT or MENS
Year 3, Semester 2
223Approved Course (Select from the Approved Courses list)Pre-requisite: SVY1104223SVY2303 Construction Surveying
Year 4, Semester 1
114SVY3202 Photogrammetry and Remote SensingPre-requisite: SVY1104 or Students must be enrolled in
114SVY2302 Mine Surveying
one of the following Programs: GCNS or GCST or GDNSor GDST or MSPT
Year 4, Semester 2
224Approved Course (Select from the Approved Courses list)
Choose one of the following two courses:
Pre-requisite: (SVY1102 andSVY1104) or Students must
222SVY3304 Cadastral Surveying (Queensland)^^
be enrolled in one of the following Programs: GCNS orGCST or GDNS or GDST orMSST or MSPT or MENSPre-requisite: (SVY1102 andSVY1104) or Students must
2SVY3306 Cadastral Surveying (New South Wales)^^
be enrolled in one of the following Programs: GCNS orGCST or GDNS or GDST orMSST or MENS
Practice Courses, Year 3 or 4
Pre-requisite: SVY1901 andSVY1104 and SVY1110 andGIS1401
M313SVY2902 Surveying and Spatial Science Practice 2
Pre-requisite: SVY1901 andSVY2301 and SVY2106 andSVY3202
M324SVY2903 Surveying and Spatial Science Practice 3
Approved Courses (Select from the following)
Pre-requisite: (SVY1102 andSVY1104) or Students must
222SVY3304 Cadastral Surveying (Queensland)**
be enrolled in one of the following Programs: GCNS orGCST or GDNS or GDST orMSST or MSPT or MENSPre-requisite: (SVY1102 andSVY1104) or Students must
2SVY3306 Cadastral Surveying (New South Wales)**
be enrolled in one of the following Programs: GCNS orGCST or GDNS or GDST orMSST or MENS
11CIV2605 Construction EngineeringPre-requisite: MAT1500 orENG1500 or ENM1500 or
11CIV2701 Road Design and Location
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208168© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Spatial Science (ADSS) - AssocDegSpSc (2022)
Major study: Surveying (Major Study Code: 15410)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
ENM1600 or Students mustbe enrolled in one of the following Programs: GCST orGDST or GCEN or GEPRPre-requisite: SVY1110 andSVY2105 or Students must
22SVY3107 Geodetic Surveying B
be enrolled in one of the following Programs: GCNS orGCST or GDNS or GDST orMSST or MSPT
22URP2002 Local Government Planning Practice and
Technology#
11ENV2201 Land Studies1,21ENM1600 Engineering Mathematics
Enrolment is not permitted inREN1201 if REN8101 hasbeen previously completed.
11REN1201 Environmental Studies>
22SVY3302 Property Valuation and Development11URP1001 Introduction to Urban and Regional Planning22URP3201 Sustainable Urban Design and Development22GIS3405 Spatial Analysis and Modelling
FootnotesStudents who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study ofENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics.
*
Unavailable in on-campus mode at Toowoomba campus in 2022<Students should study the course appropriate to their intended jurisdiction of practice.^^The alternative to the previously completed Cadastral core course may be taken as an elective/approved course.**Unavailable in on-campus mode in 2022#Unavailable in on-campus mode at Springfield in 2022>
Urban and Regional Planning major recommended full-time enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
Major study: Urban and Regional Planning (Major Study Code: 16734)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
Year 1, Semester 1
111SVY1102 Surveying A1,311GIS1402 Geographic Information Systems111URP1001 Introduction to Urban and Regional Planning111ENG1003 Problem Solving in Engineering and the Built
Environment
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208169© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Spatial Science (ADSS) - AssocDegSpSc (2022)
Major study: Urban and Regional Planning (Major Study Code: 16734)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1, Semester 2
221GIS1401 Geographic Data Presentation1,221ENG1002 Introduction to Engineering and Built
Environment ApplicationsPre-requisite: Students enrolled in one of the following
221LAW1500 Introduction to Business and Company Law
Programs: LLBP or BLAW orBABL or BALW or BBBL orBBLA or BCLA or BCLW arenot eligible for enrolment Enrolment is not permitted inLAW1500 if LAW1101 hasbeen previously completed
221Approved Course (Select from the Approved Courses list)
Practice Course, Year 1
M1211SVY1901 Surveying and Spatial Science Practice 1
Academic Courses Year 2
Year 2, Semester 1
112ENV2201 Land Studies112PRL2002 Community Consultation and Development112URP2001 Planning Structures and Statutory Planning*
112CMG1001 Introduction to Construction Management and
the Built Environment#
Year 2, Semester 2
222Approved Course (Select from the Approved Courses list)222URP2002 Local Government Planning Practice and
Technology*
222SVY1110 Introduction to Global Positioning System222Approved Course (Select from the Approved Courses list)
Practice Course, Year 2
Pre-requisite: (GIS1401 andGIS1402) or (URP2001) or
M32GPL2901 GIS and Planning Practice 1
(Students must be enrolledin one of the following Programs: GCNS or GDNS orMENS)
Approved Courses (Select from the following)
1,2,31,2ACC1101 Accounting for Decision-Making1,2,31ECO1000 Economics1,2,31MGT1000 Organisational Behaviour1CLI3301 Climate and Environment Risk Assessment11SVY3202 Photogrammetry and Remote Sensing22GIS3405 Spatial Analysis and Modelling
Pre-requisite: GIS1402 or Students must be enrolled in
22GIS4407 Web Based Geographic Information System
one of the following Programs: GCST or GDST or MSST
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208170© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Spatial Science (ADSS) - AssocDegSpSc (2022)
Major study: Urban and Regional Planning (Major Study Code: 16734)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
or MSPT or GCNS or GDNSor MENSCo-requisite: LAW1101 orLAW1500 or ENG2002 or
11LAW2107 Environmental Law*
REN1201 or (Students enrolled in BEDU (Legal Studies) or BLAW or LLBP orBALW or BBLA or BCLA orBCLW & Co-requisiteLAW1201 or LAW1111) or(Students enrolled in DJUR& Co-requisite LAW5501 orLAW5111)
22SVY3302 Property Valuation and Development22URP3201 Sustainable Urban Design and Development
FootnotesUnavailable in on-campus mode in 2022*On-campus offer available at Springfield only#
Urban and Regional Planning major recommended part-time enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
Major study: Urban and Regional Planning (Major Study Code: 16734)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
Year 1, Semester 1
111SVY1102 Surveying A1,311GIS1402 Geographic Information Systems
Year 1, Semester 2
221GIS1401 Geographic Data Presentation1,221ENG1002 Introduction to Engineering and Built
Environment Applications
Year 2, Semester 1
112URP1001 Introduction to Urban and Regional Planning112ENG1003 Problem Solving in Engineering and the Built
Environment
Year 2, Semester 2
Pre-requisite: Students enrolled in one of the following
222LAW1500 Introduction to Business and Company Law
Programs: LLBP or BLAW orBABL or BALW or BBBL or
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208171© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Spatial Science (ADSS) - AssocDegSpSc (2022)
Major study: Urban and Regional Planning (Major Study Code: 16734)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
BBLA or BCLA or BCLW arenot eligible for enrolment Enrolment is not permitted inLAW1500 if LAW1101 hasbeen previously completed
222Approved Course (Select from the Approved Courses list)
Practice Course, Year 1 or 2
M112SVY1901 Surveying and Spatial Science Practice 1
Academic Courses Years 3-4
Year 3, Semester 1
113ENV2201 Land Studies113PRL2002 Community Consultation and Development
Year 3, Semester 2
223Approved Course (Select from the Approved Courses list)223URP2002 Local Government Planning Practice and
Technology*
Year 4, Semester 1
114URP2001 Planning Structures and Statutory Planning*
114CMG1001 Introduction to Construction Management and
the Built Environment#
Year 4, Semester 2
224SVY1110 Introduction to Global Positioning System224Approved Course (Select from the Approved Courses list)
Practice Course, Year 3 or 4
Pre-requisite: (GIS1401 andGIS1402) or (URP2001) or
M34GPL2901 GIS and Planning Practice 1
(Students must be enrolledin one of the following Programs: GCNS or GDNS orMENS)
Approved Courses (Select from the following)
1,2,31,2ACC1101 Accounting for Decision-Making1,2,31ECO1000 Economics1,2,31MGT1000 Organisational Behaviour1CLI3301 Climate and Environment Risk Assessment11SVY3202 Photogrammetry and Remote Sensing22GIS3405 Spatial Analysis and Modelling
Pre-requisite: GIS1402 or Students must be enrolled in
22GIS4407 Web Based Geographic Information System
one of the following Programs: GCST or GDST or MSSTor MSPT or GCNS or GDNSor MENSCo-requisite: LAW1101 orLAW1500 or ENG2002 or
11LAW2107 Environmental Law*
REN1201 or (Students en
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208172© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Spatial Science (ADSS) - AssocDegSpSc (2022)
Major study: Urban and Regional Planning (Major Study Code: 16734)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
rolled in BEDU (Legal Studies) or BLAW or LLBP orBALW or BBLA or BCLA orBCLW & Co-requisiteLAW1201 or LAW1111) or(Students enrolled in DJUR& Co-requisite LAW5501 orLAW5111)
22SVY3302 Property Valuation and Development22URP3201 Sustainable Urban Design and Development
FootnotesUnavailable in on-campus mode in 2022*On-campus offer available at Springfield only#
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208173© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Associate Degree of Spatial Science (ADSS) - AssocDegSpSc (2022)
Bachelor of Engineering Science (BENS) - BEngSciQTAC code (Australian and New Zealand applicants): Toowoomba campus: 907901; External: 907905;Springfield campus: 927902
CRICOS code (International applicants): 079333D
External#@On-campus*
Semester 1 (February)Semester 2 (July)Semester 3 (November)
Semester 1 (February)Semester 2 (July)
Start:
-Springfield, ToowoombaCampus:
Commonwealth supported placeCommonwealth supported placeFees:Domestic full fee paying placeDomestic full fee paying placeInternational full fee paying placeInternational full fee paying place
3 years full-time, 6 years part-timeStandard duration:
From: Associate Degree of EngineeringProgramarticulation: To: Bachelor of Engineering (Honours); Master of Engineering Science; Master of
Engineering Practice
FootnotesThe only majors available on-campus at USQ Springfield are Civil Engineering, Infrastructure Management Engineering, Electrical andElectronic Engineering and Mechanical Engineering.
*
The semester 3 intake is only available via external study.#External students must be able to attend mandatory and highly recommended residential schools at a USQ campus.@
Contact us
Current studentsFuture International studentsFuture Australian and NewZealand students
Ask a questionFreecall (within Australia): 1800007 252Phone (from outside Australia): +617 4631 2285Email [email protected]
Ask a questionPhone: +61 7 4631 5543Email: [email protected]
Ask a questionFreecall (within Australia): 1800269 500Phone (from outside Australia): +617 4631 5315Email: [email protected]
Professional accreditationA graduate of this program is eligible to apply for graduate membership of Engineers Australia as anEngineering Technologist. After further professional development, a graduate member with a Bachelor ofEngineering Science may apply for chartered status as an Engineering Technologist and, when granted, mayuse the post-nominal TMIEAust CEngT.
Program aimsThe Bachelor of Engineering Science is a tertiary level program designed to educate engineering technologistsin the theory, methods and practices necessary to function as an engineering technologist. It is also designedso that students are eligible for graduate membership of Engineers Australia (as an Engineering Technologist)and other appropriate professional bodies. To this end, the program is designed to provide an in-depthunderstanding of specialist bodies of knowledge of a branch of engineering practice, appropriate to thosefunctioning at engineering technologist level with the personal, professional, and technical knowledge, skills
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208174© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
and understanding necessary to practice within an appropriate social, cultural, industrial and environmentalcontext.
Program objectivesUpon successful completion of the degree, students should be able to:
● Display systematic knowledge that underpins relevant engineering theory and practice in the technologydomain.
● Recognise the social purpose of engineering technology and explain the relationship between human-madeproducts and systems, and community needs.
● Apply well-researched, innovative, industry systems approaches to solve a range of well-definedengineering problems, and to address issues of sustainable practice in diverse environmental, technicaland social contexts.
● Apply relevant management skills and design processes within the domain of engineering technologiststo enable the delivery of engineering projects within given constraints.
● Make appropriate judgements by critically evaluating evidence, identifying and analysing ethical issuesand applying cultural competencies, including those relevant to indigenous peoples
● Communicate effectively in English and interpret information for diverse audiences using oral, writtenand technology-based approaches; and apply effective competencies as a leader, team member andindividual within the domain of engineering technologists.
● Engage in lifelong learning through reflection, and be accountable for their personal and professionalactions by managing and monitoring personal performance.
Australian Qualifications FrameworkThe Australian Qualifications Framework (AQF) is a single national, comprehensive system of qualificationsoffered by higher education institutions (including universities), vocational education and training institutionsand secondary schools. Each AQF qualification has a set of descriptors which define the type and complexityof knowledge, skills and application of knowledge and skills that a graduate who has been awarded thatqualification has attained, and the typical volume of learning associated with that qualification type.
This program is at AQF Qualification Level 07. Graduates at this level will have broad and coherent knowledgeand skills for professional work and/or further learning.
The full set of levels criteria and qualification type descriptors can be found by visiting www.aqf.edu.au.
Program Information SetView USQ’s admission criteria, student profiles and a summary of all offers made under Course AdmissionInformation Set via the QTAC website.
Admission requirementsTo be eligible for admission, applicants must satisfy the following requirements:
● Have achieved a minimum Australian Tertiary Admission Rank (ATAR) of 65.6, or equivalentqualification.^
● Subject Pre-requisites: English (Units 3 & 4, C) and Mathematical Methods (Units 3 & 4, C) or equivalent.● English Language Proficiency requirements for Category 2.
All students are required to satisfy the applicable English language requirements.
If students do not meet the English language requirements they may apply to study a University-approvedEnglish language program. On successful completion of the English language program, students may beadmitted to an award program.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208175© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
These are determined by the University for specific programs each Semester. The 2021 ATAR andtertiary entrance ranks are based on agreed QTAC schedules which assess formal study at Year 12 or
^
equivalent level, tertiary, preparatory, professional or vocational qualifications or work experience, asdetailed in the QTAC Assessment of Qualifications Manual and QTAC Assessor Guidelines.
Adjustment factors may help you get into the program of your choice by increasing your entrance rank.The additional points don't apply to all applicants or all programs. Please read the information aboutUSQ's Adjustment Factors carefully to find out what you may be eligible for.
Program fees
Commonwealth supported placeA Commonwealth supported place is where the Australian Government makes a contribution towards the costof a students' higher education and students pay a student contribution amount, which varies depending onthe courses undertaken. Students are able to calculate the fees for a particular course via the Course FeeSchedules.
Commonwealth Supported students may be eligible to defer their fees through a Government loan calledHECS-HELP.
Domestic full fee paying placeDomestic full fee paying places are funded entirely through the full fees paid by the student. Full fees varydepending on the courses that are taken. Students are able to calculate the fees for a particular course via theCourse Fee Schedule
Domestic full fee paying students may be eligible to defer their fees through a Government loan called FEE-HELP provided they meet the residency and citizenship requirements.
Australian citizens, Permanent Humanitarian Visa holders, Permanent Resident visa holders and New Zealandcitizens who will be resident outside Australia for the duration of their program pay full tuition fees and arenot eligible for FEE-Help.
International full fee paying placeInternational students pay full fees. Full fees vary depending on the courses that are taken and whether theyare studied on-campus, via distance education/online. Students are able to calculate the fees for a particularcourse via the Course Fee Schedules.
Program structureThe Bachelor of Engineering Science is a 24-unit program consisting of Academic Courses and PracticeCourses. Students undertake a major of study, including approved courses which students are able to select.Mechanical engineering students may choose to study a minor of four units in another area of study insteadof four approved courses.
Academic courses are normally one-unit courses and involve approximately 155 hours of student work perunit.
Practice courses are zero unit courses and each involves approximately 50 hours of student work.
Required time limitsStudents have a maximum of 8 years to complete this program.
Core coursesThe courses that comprise the core studies program are shown in the following table:
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208176© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
1,21,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,211ENG1003 Problem Solving in Engineering and theBuilt Environment
1,21,21,2ENG1100 Introduction to Engineering Design
1,2,31.21,2ENG2002 Technology, Sustainability and Society
1,311ENG3003 Engineering Management*
1,21,21,2ENG3111 Technology Design Project
1,21,21,2ENM1600 Engineering Mathematics
Practice Courses
2,311,2ENG1901 Engineering Practice 1
1,3ENG3909 Work Experience - Technologist
FootnotesThe Semester 3 offering of this course is offered in odd numbered years only.*
Major studiesThe Bachelor of Engineering Science consists of a core component and a series of major studies. All studentsmust complete the core courses and one of the major studies. The major study provides students with knowledgeand skills in a specific discipline. The major study areas in the USQ Bachelor of Engineering Science arelisted below.
ExternalOn-Campus SpringfieldOn-Campus ToowoombaMajor
YesNoYesAgricultural Engineering
YesYesYesCivil Engineering
YesYesYesElectrical and ElectronicEngineering
YesNoYesEnvironmentalEngineering
YesYesYesInfrastructure ManagementEngineering
YesYesYesMechanical Engineering
Agricultural Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
22AGR2301 Agricultural Science
11AGR2302 Agricultural Machinery
11AGR3303 Agricultural Materials and Post-HarvestTechnologies
11AGR3304 Soil Science
22AGR3305 Precision and Smart Technologies inAgriculture
2,322CIV1501 Engineering Statics
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208177© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
222CIV2403 Geology and Geomechanics
111ENV2103 Hydraulics I
222ENV3105 Hydrology
22ENV4106 Irrigation Science
1,2,31,21,2MEC1201 Engineering Materials
111MEC2402 Stress Analysis
222SVY1500 Spatial Science for Engineers
Approved Courses (x 4)
Practice Courses
3AGR2902 Field Practice
2AGR3903 Soil and Water Engineering Practice 2
2,322CIV2901 Geology and Geomechanics Practice
1,2,322ENV2902 Hydraulics Practice
Civil Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
2,322CIV1501 Engineering Statics
222CIV2403 Geology and Geomechanics
222CIV2502 Structural and Building Technology
222CIV2503 Structural Design I
111CIV2605 Construction Engineering
111CIV2701 Road Design and Location
222CIV2702 Municipal Services
222CMG2001 Job Organisation
111ENV2103 Hydraulics I
222ENV3105 Hydrology
1,2,31,21,2MEC1201 Engineering Materials
111MEC2402 Stress Analysis
222SVY1500 Spatial Science for Engineers
Approved Courses (x 4)
Practice Courses
2,322CIV2901 Geology and Geomechanics Practice
311CIV3906 Civil Materials Practice
3CIV3907 Civil Systems Practice
1,2,322ENV2902 Hydraulics Practice
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208178© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Electrical and Electronic Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
111ELE1301 Computer Engineering
111ELE1502 Electronic Circuits
2,322ELE1801 Electrical Technology
222ELE2101 Control and Instrumentation
111ELE2303 Embedded Systems Design
222ELE2501 Electronic Workshop and Production
222ELE2503 Electronic Systems
111ELE2601 Telecommunications Principles
111ELE2702 Electrical Measurement and Analysis
222ELE3506 Electronic Measurement
111ELE3803 Electrical Plant
222ELE3805 Power Electronics Principles andApplications
1,2,31,21,2MEC1201 Engineering Materials
Approved Courses (x4)
Practice Courses
322ELE1911 Electrical and Electronic Practice A
311ELE2912 Electrical and Electronic Practice B
2ELE2913 Electrical and Electronic Practice C
31ELE3914 Electrical and Electronic Practice D
Environmental Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
11AGR3304 Soil Science
2,322CIV1501 Engineering Statics
222CIV2403 Geology and Geomechanics
111ENV2103 Hydraulics I
11ENV2105 Applied Chemistry and Microbiology
111ENV2201 Land Studies
22ENV3103 Environmental Pollution
222ENV3105 Hydrology
22ENV4106 Irrigation Science
222ENV4203 Public Health Engineering
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208179© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
11ENV4204 Environmental Technology
1,2,31,21,2MEC1201 Engineering Materials
222SVY1500 Spatial Science for Engineers
Approved Courses (x 4)
Practice Courses
3AGR2902 Field Practice
2AGR3903 Soil and Water Engineering Practice 2
2,322CIV2901 Geology and Geomechanics Practice
1,2,322ENV2902 Hydraulics Practice
3ENV3904 Environmental Engineering Practice
Infrastructure Management Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
1,2,31,21,2ACC1101 Accounting for Decision-Making
2,322CIV1501 Engineering Statics
222CIV2403 Geology and Geomechanics
222CIV2502 Structural and Building Technology
222CIV2503 Structural Design I
111CIV2605 Construction Engineering
2CIV3603 Construction Methods
222CMG2001 Job Organisation
111ENV2103 Hydraulics I
1,2,31,21,2LAW1500 Introduction to Business and CompanyLaw
1,2,31,21,2MEC1201 Engineering Materials
1,2,311MGT1000 Organisational Behaviour
111MGT1001 Foundations of Human ResourceManagement
111MGT2001 Risk Mitigation, Work Health and Safety
222SVY1500 Spatial Science for Engineers
Approved Courses (x 2)
Practice Courses
2,322CIV2901 Geology and Geomechanics Practice
311CIV3906 Civil Materials Practice
Mechanical Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208180© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Academic Courses
222CIV1501 Engineering Statics
2,322ELE1801 Electrical Technology
1,2,31,21,2MEC1201 Engineering Materials
222MEC2106 Introduction to Thermofluids
111MEC2202 Manufacturing Processes
222MEC2301 Design of Machine Elements
222MEC2304 Solid Modelling
111MEC2402 Stress Analysis
111MEC2405 Machine Dynamics
111MEC3107 Thermofluids
111MEC3203 Materials Technology
222MEC3204 Production Engineering
Approved Courses (x 5)
Practice Courses
311MEC2901 Mechanical Practice 1
111MEC2902 Mechanical Practice 2
32MEC3903 Mechanical Practice 3
22MEC3904 Mechanical Practice 4
Practical experienceTo be eligible to graduate from the Bachelor of Engineering Science, students must obtain an aggregate of atleast 45 days of suitable work experience during their program. This experience may be in an engineeringoffice or laboratory where the student would be working principally with professional engineers and engineeringassociates. It may, however, be preferable for students to spend some time in field or factory activities to gaininsight into industrial practice and to see what is involved in converting designs into finished products. Studentsare required to enrol in ENG3909 Work Experience - Technologist in the latter part of their program and keepa record of appropriate experience as specified in the Course Specification. The work experience is to beendorsed by an appropriate person in the organisation providing the experience and submitted to the examiner.The student must meet all costs associated with the acquisition of work experience to satisfy this requirement.The record of work experience must be made available for perusal by the Faculty of Health, Engineering andSciences upon request. The acceptability or otherwise of employment experience, and the period of that typeof experience that may be credited towards the 45 days, will be determined by the Examiner of ENG3909Work Experience - Technologist.
Credit or exemptions for ENG3909 Work Experience - Technologist will not normally be considered.
IT requirementsAccess to an up-to-date computer is necessary. On-campus students can access appropriately equippedlaboratories, but should consider acquisition of their own computer. External students should be able to accessa computer with the following minimum standards as advised by the University. All students should haveaccess to email and the Internet via a computer running the latest versions of Internet web browsers such asInternet Explorer or Firefox. The University has a wireless network for on-campus students' computers. Inorder to take advantage of this facility and further enhance their on-campus learning environment, studentsshould consider purchasing a notebook/laptop computer with wireless connectivity. Specialist software isrequired for some courses.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208181© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Residential schoolsThe attendance requirement of residential schools within this degree is indicated by the following letters: R= Recommended; HR = Highly Recommended; M = Mandatory. To find out more about residential schools,visit the Residential School Schedule to view specific dates for your degree, or visit the Policy and ProcedureLibrary.
Students are required to undertake practical and professional activities relevant to their program throughenrolment in a series of Practice courses in the program. Practice courses are zero unit courses that may beundertaken in either on-campus or external mode and the final grades available are Pass (P)/Fail (F) only.They are a compulsory part of the program and do not attract a student contribution charge for Australianresidents or a tuition fee for international students. The recommended enrolment schedule for Practice coursesis shown in the Recommended Enrolment Pattern for the program in this Handbook.
External students must attend a number of residential schools during their program to obtain experience inpractical and professional activities appropriate to the program. The residential schools are included in Practicecourses which are conducted in Semester 3 or during the recess periods. The dates for each residential schoolPractice course are shown in the Residential School schedule in this Handbook and external students shouldensure they are able to attend the residential school prior to enrolling in a Practice course. Personal protectiveequipment is compulsory in many engineering, construction and spatial science laboratories, student shouldconfirm the requirements before attending residential schools for Practice courses.
Student who enrol in on-campus mode for Practice courses normally undertake a series of weekly activitiesand/or attend a compulsory residential school.
Agricultural Engineering
● ENG1901 Engineering Practice 1● CIV2901 Geology and Geomechanics Practice● ENV2902 Hydraulics Practice● AGR2902 Field Practice● AGR3903 Soil and Water Engineering Practice 2
Civil Engineering
● ENG1901 Engineering Practice 1● CIV2901 Geology and Geomechanics Practice● ENV2902 Hydraulics Practice● CIV3906 Civil Materials Practice● CIV3907 Civil Systems Practice
Electrical and Electronic Engineering
● ENG1901 Engineering Practice 1● ELE1911 Electrical and Electronic Practice A● ELE2912 Electrical and Electronic Practice B● ELE3914 Electrical and Electronic Practice D● CHE1110 Chemistry 1 (Elective)
Environmental Engineering
● ENG1901 Engineering Practice 1● CIV2901 Geology and Geomechanics Practice● ENV2902 Hydraulics Practice● AGR2902 Field Practice● ENV3904 Environmental Engineering Practice● AGR3903 Soil and Water Engineering Practice 2
Infrastructure Management Engineering
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208182© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
● ENG1901 Engineering Practice 1● CIV2901 Geology and Geomechanics Practice● CIV3906 Civil Materials Practice
Mechanical Engineering
● ENG1901 Engineering Practice 1● MEC2901 Mechanical Practice 1● MEC2902 Mechanical Practice 2● MEC3903 Mechanical Practice 3● MEC3904 Mechanical Practice 4
ArticulationStudents who complete a Bachelor of Engineering Science program, or equivalent, may articulate to theBachelor of Engineering (Honours). The amount of credit granted depends upon the field of study and approvedcourses completed in the Bachelor of Engineering Science program and the field of study selected in theBachelor of Engineering (Honours) and is maximised for students undertaking the pathway to Bachelor ofEngineering (Honours).
Students who complete a Bachelor of Engineering Science program in a cognate major may articulate to theMEPR Master of Engineering Practice when eligible. To be eligible students must either:
● gain 5 years relevant industry experience after receiving their BENS degree, or● on entry to the BENS program have achieved Engineers Australia Associate Status (or equivalent) and
have at least 5 years of relevant industrial experience in a cognate field. In this case the student may beapproved to complete the ENG3300 Industry Experience Evaluation Portfolio course to complete theirBENS graduate Technologist portfolio. (refer to Pathways to the Master of Engineering Practice belowfor more details)
Engineering Pathways
Pathway to the Bachelor of Engineering (Honours)
A Pathway has been developed for students who intend to study the Bachelor of Engineering (Honours) oncethey have completed the Bachelor of Engineering Science program. Pathway to the Bachelor of Engineering(Honours) maximises the advanced standing (exemptions) students will receive in the Bachelor of Engineering(Honours) program. A Pathway to the Bachelor of Engineering (Honours) has been developed for each of thefollowing Bachelor of Engineering Science majors into the equivalent Bachelor of Engineering (Honours)major:
● Agricultural Engineering● Civil Engineering● Electrical and Electronic Engineering● Environmental Engineering● Mechanical Engineering
In addition, students enrolled in the Electrical and Electronic Engineering major may articulate into thefollowing Bachelor of Engineering (Honours) majors:
● Computer Systems Engineering● Power Engineering
The pathway to the Bachelor of Engineering (Honours) has been specially developed for students who studypart-time. Full-time students may seek approval to follow the Pathway to the Bachelor of Engineering (Honours),but it is not timetabled for on-campus students.
Students must have the approval of the Faculty of Health, Engineering and Sciences to undertake the Pathwayto the Bachelor of Engineering (Honours). Students are strongly advised to consider and apply for approval
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208183© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
for this Pathway as soon as possible in order to maximise the credit they will receive in the Bachelor of Engineering (Honours). This should be done prior to the commencement of the second year of studies if possibleor after successful completion of at least eight (8) academic courses including ENM1600 EngineeringMathematics.
The Faculty will take into consideration a student's GPA before granting approval.
Once approval is granted, the Faculty will advise students of the courses they should study when grantingapproval for them to follow the Pathway to the Bachelor of Engineering (Honours).
The following tables list some of the changes to the courses in each major which should be observed toundertake a Pathway into the Bachelor of Engineering (Honours). Pathway students should seek advice fromthe Faculty of Health, Engineering and Sciences before selecting their approved courses.
Agricultural Engineering (BENH)
Semester(s) OfferedApproved Courses(choose thefollowing)
OnlineExternalSpringfieldToowoomba
111ENM2600 AdvancedEngineeringMathematics
222ENG3104EngineeringSimulations andComputations
Students should contact the Faculty of Health, Engineering and Sciences regarding the selection of theirremaining Approved courses.
Civil Engineering (BENH)
Substitute courseCourses to NOT be studied
CIV3703 Transport EngineeringCIV2702 Municipal Services
ENV4203 Public Health Engineering1 Approved Course
Semester(s) OfferedApproved Courses(choose thefollowing)
OnlineExternalSpringfieldToowoomba
111ENM2600 AdvancedEngineeringMathematics
222ENG3104EngineeringSimulations andComputations
Students should contact the Faculty of Health, Engineering and Sciences regarding the selection of theirremaining Approved courses.
Computer Systems Engineering (BENH)
Students wishing to articulate to this major should enrol in the Bachelor of Engineering Science (Electricaland Electronic Engineering).
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208184© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Substitute courseCourse to NOT be studied
ELE2103 Linear Systems and ControlELE2101 Control and Instrumentation
Semester(s) OfferedApproved Courses(choose thefollowing)
OnlineExternalSpringfieldToowoomba
1,2,31,21,2CSC1401FoundationProgramming
111ENM2600 AdvancedEngineeringMathematics
222ENG3104EngineeringSimulations andComputations
Students should contact the Faculty of Health, Engineering and Sciences regarding the selection of theirremaining Approved courses.
Electrical and Electronic Engineering (BENH)
Substitute courseCourse to NOT be studied
ELE2103 Linear Systems and ControlELE2101 Control and Instrumentation
ELE2504 Electronic Design and AnalysisELE2503 Electronic Systems
Semester(s) OfferedApproved Courses(choose thefollowing)
OnlineExternalSpringfieldToowoomba
111ENM2600 AdvancedEngineeringMathematics
222ENG3104EngineeringSimulations andComputations
Students should contact the Faculty of Health, Engineering and Sciences regarding the selection of theirremaining Approved courses.
Environmental Engineering (BENH)
Semester(s) OfferedApproved Courses(choose thefollowing)
OnlineExternalSpringfieldToowoomba
111ENM2600 AdvancedEngineeringMathematics
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208185© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
222ENG3104EngineeringSimulations andComputations
Students should contact the Faculty of Health, Engineering and Sciences regarding the selection of theirremaining Approved courses.
Mechanical Engineering (BENH)
Substitute courseCourse to NOT be studied
MEC2401 Dynamics IMEC2405 Machine Dynamics
Semester(s) OfferedApproved Courses(choose thefollowing)
OnlineExternalSpringfieldToowoomba
111ENM2600 AdvancedEngineeringMathematics
222ENG3104EngineeringSimulations andComputations
Students should contact the Faculty of Health, Engineering and Sciences regarding the selection of theirremaining Approved courses.
Power Engineering (BENH)
Students wishing to articulate to this major should enrol in the Bachelor of Engineering Science (Electricaland Electronic Engineering).
Substitute courseCourses to NOT be studied
ELE2103 Linear Systems and ControlELE2101 Control and Instrumentation
ELE2504 Electronic Design and AnalysisELE2503 Electronic Systems
Semester(s) OfferedApproved Courses (choose thefollowing) OnlineExternalSpringfieldToowoomba
111ENM2600 Advanced EngineeringMathematics
222ENG3104 EngineeringSimulations and Computations
Pathways to the Master of Engineering Practice
One Pathway to the MEPR Master of Engineering Practice program has been developed for graduates of theBENS program who gain five years of relevant industrial experience after receiving their BENS degree. Thisindustrial experience should be in the BENS major and/or the major they wish to undertake in the program.Students who wish to follow this pathway into a different major in the MEPR from the major they studied inthe BENS are not guaranteed articulation into the MEPR. All students should consult their relevant MajorConvenor for advice before enrolling in their courses.
An alternative engineering Practice Pathway has been developed for students who intend to study the MEPRimmediately after completing the Bachelor of Engineering Science program. The BENS engineering practice
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208186© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
pathway is designed to enable experienced engineering Associates to draw on their industrial experience todemonstrate their achievement of the required generic and technical capabilities to Engineers Australia Stage2 Experienced Technologist Competency attributes. BENS graduates who have completed this engineeringpractice pathway may be considered for entry into the MEPR program after receiving formal EngineersAustralia Technologist accreditation using their Bachelor of Engineering Science (BENS) practice pathwaye-Portfolio.
The engineering practice pathway is an option for students who hold an ADNG Associate Degree of Engineeringor close equivalent and have five years of relevant industry experience at the time they enter the Bachelor ofEngineering Science program. The pathway requires students to complete the approved course ENG3300Industry Experience Evaluation Portfolio. Students who have the appropriate industrial experience, and areeligible for 10 or more exemptions upon entry into the Bachelor of Engineering Science (BENS) programmay undertake this pathway. The ENG3300 Industry Experience Evaluation Portfolio will enable students toassess their existing workplace integrated learning skills, attributes and capabilities, and complete a technologistworkplace e-portfolio to demonstrate their level of competency achievements.
Prospective Engineering Practice Pathway students should visit the Engineers Australia web site to gain anunderstanding of the processes which will be followed. In particular, they should view the EngineeringTechnologist Stage Two Competencies and the guidelines for achieving Chartered Technologist status.
Exit pointsStudents who, for whatever reason, are unable to complete the Bachelor of Engineering Science and whosatisfy all of the requirements of either the Associate Degree of Engineering or the Diploma of EngineeringStudies may be permitted to exit with that award.
CreditExemptions/credit will be assessed based on the USQ Credit and Exemption Procedure.
Work Experience
Work and industrial experience that has not been formally assessed, does not normally qualify for coursecredit in the Bachelor of Engineering Science program. The MEPR Master of Engineering Practice and theBENS/MEPR Engineering Practice Pathway has been established with the capacity of recognising and formallyassessing industrial and work integrated learning (WIL) experience. Existing work experience may be usedto satisfy the practical/work experience requirements when completing the ENG3909 Work Experience -Technologist practice course.
Other informationThe Faculty of Health, Engineering and Sciences may permit a student to enrol in an approved course otherthan those specified for the accredited program. Students who wish to enrol in approved courses other thanthose listed, must obtain written approval from their Major Convenor prior to enrolling in the course.
To satisfy the requirements of the program students must complete all Academic and Practice courses in thefollowing recommended enrolment patterns. Students following a non-standard enrolment pattern shouldconsult the course specification to ascertain if a course is offered in another term.
Agricultural Engineering major full-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208187© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Students who wish to complete a Pathway to another degree in Agricultural Engineering should seek advicefrom the Faculty of Health, Engineering and Sciences before enrolling in their courses.
Major study: Agricultural Engineering (Major Study Code: 16244)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,211ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,211ENM1600 Engineering Mathematics1,211ENG1003 Problem Solving in Engineering and the Built
Environment1,2,311MEC1201 Engineering Materials1,221ENG1100 Introduction to Engineering Design
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,321CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
1,2,321ENG2002 Technology, Sustainability and Society221SVY1500 Spatial Science for Engineers
Practice Courses Year 1
M2,311ENG1901 Engineering Practice 1
Academic Courses Year 2
112AGR2302 Agricultural MachineryPre-requisite: CIV1500 orCIV1501 or Students must be
112ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPRPre-requisite: CIV1501 or Students must be enrolled in
112MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR
112Approved Course (Select from the approved course list)#
222Approved Course (Select from the approved course list)#
Pre-requisite: CIV1501 orCIV1500 or Students must be
222CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPR
222AGR2301 Agricultural Science222ENV3105 Hydrology
Practice Courses Year 2
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,322CIV2901 Geology and Geomechanics Practice
Pre-requisite or Co-requisite:ENV2103 or ENV1101
M1,2,322ENV2902 Hydraulics Practice
M3AGR2902 Field Practice^
Academic Courses Year 3
1,313ENG3003 Engineering Management†
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208188© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Agricultural Engineering (Major Study Code: 16244)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
113AGR3304 Soil Science113AGR3303 Agricultural Materials and Post-Harvest
Technologies113Approved Course (Select from the approved course list)#
223AGR3305 Precision and Smart Technologies in AgriculturePre-requisite: AGR3304 orStudents must be enrolled in
223ENV4106 Irrigation Science
one of the following Programs: GCEN or GCSC or GDSIor METC or MEPR or GCNSor GDNS orMENS orMSCN.
223Approved Course (Select from the approved course list)#
Pre-requisite: (ENG2102 orENG1003 or ENG1101) and
1,223ENG3111 Technology Design Project
Undergraduate studentsmusthave completed 14 coursesin their program.
Practice Courses Year 3
M2AGR3903 Soil and Water Engineering Practice 21,3ENG3909 Work Experience - Technologist
Approved Courses: Select any BENH (Agricultural Engineering) Core or Major course or any of thefollowing:
11ELE1301 Computer Engineering22ELE2103 Linear Systems and Control11ENV2201 Land Studies
Pre-requisite: MEC1201 orStudents must be enrolled in
11MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCENPre-requisite: MEC2301 orStudents must be enrolled in
22MEC3303 Mechanical and Mechatronic System Design
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENSPre-requisite: MEC1201 orStudents must be enrolled in
11MEC3203 Materials Technology
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENS
FootnotesThis is a Pathway course. Please refer to Engineering pathways under Articulation.#The residential school for this course may involve overnight field trips for which each student will be responsible for their own accommodationcosts.
^
The semester 3 offering of this course is offered in odd numbered years only.†
Agricultural Engineering major part-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208189© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Students who wish to complete a Pathway to another degree in Agricultural Engineering should seek advicefrom the Faculty of Health, Engineering and Sciences before enrolling in their courses.
Major study: Agricultural Engineering (Major Study Code: 16244)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
1,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,21,2ENM1600 Engineering Mathematics1,21,2ENG1100 Introduction to Engineering Design
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,32CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
Year 2
1,21ENG1003 Problem Solving in Engineering and the BuiltEnvironment
1,2,31,2MEC1201 Engineering Materials1,2,31,2ENG2002 Technology, Sustainability and Society22SVY1500 Spatial Science for Engineers
Year 2 Practice Courses
M2,31,2ENG1901 Engineering Practice 1
Year 3
11AGR2302 Agricultural MachineryPre-requisite: CIV1500 orCIV1501 or Students must be
11ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPR
Approved Course (Select from the approved course list)#
Pre-requisite: CIV1501 orCIV1500 or Students must be
22CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPR
Year 3 Practice Courses
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,32CIV2901 Geology and Geomechanics Practice
Pre-requisite or Co-requisite:ENV2103 or ENV1101
M1,2,32ENV2902 Hydraulics Practice
Year 4
Pre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR
Approved Course (Select from the approved course list)#
22AGR2301 Agricultural Science22ENV3105 Hydrology
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208190© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Agricultural Engineering (Major Study Code: 16244)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 4 Practice Courses
M3AGR2902 Field Practice^
Year 5
1,31ENG3003 Engineering Management†
11AGR3304 Soil Science22AGR3305 Precision and Smart Technologies in Agriculture
Pre-requisite: AGR3304 orStudents must be enrolled in
22ENV4106 Irrigation Science
one of the following Programs: GCEN or GCSC or GDSIor METC or MEPR or GCNSor GDNS orMENS orMSCN.
Year 6
11AGR3303 Agricultural Materials and Post-HarvestTechnologies
Approved Course (Select from the approved course list)#
Approved Course (Select from the approved course list)#
Pre-requisite: (ENG2102 orENG1003 or ENG1101) and
1,21,2ENG3111 Technology Design Project
Undergraduate studentsmusthave completed 14 coursesin their program.
Year 6 Practice Courses
M2AGR3903 Soil and Water Engineering Practice 21,3ENG3909 Work Experience - Technologist
Approved Courses: Select any BENH (Agricultural Engineering) Core or Major course or any of thefollowing:
11ELE1301 Computer Engineering22ELE2103 Linear Systems and Control11ENV2201 Land Studies
Pre-requisite: MEC1201 orStudents must be enrolled in
11MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCENPre-requisite: MEC2301 orStudents must be enrolled in
22MEC3303 Mechanical and Mechatronic System Design
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENSPre-requisite: MEC1201 orStudents must be enrolled in
11MEC3203 Materials Technology
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENS
FootnotesThis is a Pathway course. Please refer to Engineering pathways under Articulation.#The residential school for this course may involve overnight field trips for which each student will be responsible for their own accommodationcosts.
^
The semester 3 offering of this course is offered in odd numbered years only.†
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208191© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Civil Engineering major full-time recommended enrolment pattern (Toowoomba andSpringfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Students who wish to complete a Pathway to another degree in Civil Engineering should seek advice fromthe Faculty of Health, Engineering and Sciences before enrolling in their courses.
Major study: Civil Engineering (Major Study Code: 12044)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
111ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,211ENM1600 Engineering Mathematics1,211ENG1003 Problem Solving in Engineering and the Built
Environment1,2,311MEC1201 Engineering Materials1,221ENG1100 Introduction to Engineering Design
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,321CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
1,2,321ENG2002 Technology, Sustainability and Society221SVY1500 Spatial Science for Engineers
Practice Courses Year 1
M2,311ENG1901 Engineering Practice 1
Academic Courses Year 2
Pre-requisite: CIV1500 orCIV1501 or Students must be
112ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPR
112Approved Course (Select from the approved course list)#
112CIV2605 Construction EngineeringPre-requisite: MAT1500 orENG1500 or ENM1500 or
112CIV2701 Road Design and Location
ENM1600 or Students mustbe enrolled in one of the following Programs: GCST orGDST or GCEN or GEPRPre-requisite: CIV1501 orCIV1500 or Students must be
222CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPR
222Approved Course (Select from the approved course list)#
222CIV2502 Structural and Building TechnologyPre-requisite: ENV2103 orENV1101
222CIV2702 Municipal Services#
Practice Courses Year 2
Pre-requisite: MEC1201 andENG1901 or Students must
M312CIV3906 Civil Materials Practice
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208192© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Civil Engineering (Major Study Code: 12044)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
be enrolled in one of the following programs: ADCN orBCON or BCNHPre-requisite or Co-requisite:ENG1901 and CIV2403
M2,322CIV2901 Geology and Geomechanics Practice
Pre-requisite or Co-requisite:ENV2103 or ENV1101
M1,2,322ENV2902 Hydraulics Practice
Academic Courses Year 3
1,313ENG3003 Engineering Management†
Pre-requisite: CIV1501 or Students must be enrolled in
113MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR
113Approved Course (Select from the approved course list)#
113Approved Course (Select from the approved course list)#
Pre-requisite: (ENG1100 andMEC2402) or (ENG1100 and
223CIV2503 Structural Design I
CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in: GCEN or GEPR
223CMG2001 Job Organisation223ENV3105 Hydrology
Pre-requisite: (ENG2102 orENG1003 or ENG1101) and
1,223ENG3111 Technology Design Project
Undergraduate studentsmusthave completed 14 coursesin their program.
Practice Courses Year 3
Pre-requisite: CIV2503 or Students must be enrolled in
M3CIV3907 Civil Systems Practice
one of the following Programs: MENS or MEPR
1,3ENG3909 Work Experience - Technologist
Approved Courses: Select any BENH (Civil Engineering) Core or Major course or any of the following:
2CIV3603 Construction Methods2,32,3ENG4004 Engineering Project and Operations
Management‡
11ENV2201 Land StudiesPre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology@
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS
1,31GIS1402 Geographic Information Systems
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208193© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Civil Engineering (Major Study Code: 12044)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Enrolment is not permitted inREN1201 if REN8101 hasbeen previously completed.
11REN1201 Environmental Studies*
Pre-requisite: SVY1102 orSVY1500 or Students must
22SVY1104 Survey Computations A
be enrolled in one of the following Programs: GCST orGDST or MSPT
22URP3201 Sustainable Urban Design and DevelopmentPre-requisite: Students mustbe enrolled in the BENS engi
1,2ENG3300 Industry Experience Evaluation Portfolio
neering practice sub-planpathway.
FootnotesThis is a Pathway course. Please refer to Engineering pathways under Articulation.#The semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡Students who wish to enrol in ENV4204 Environmental Technology as an Approved course, should consult their Major Convenor.@Unavailable in on-campus mode at Springfield in 2022*
Civil Engineering major part-time recommended enrolment pattern (Toowoomba andSpringfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Students who wish to complete a Pathway to another degree in Civil Engineering should seek advice fromthe Faculty of Health, Engineering and Sciences before enrolling in their courses.
Major study: Civil Engineering (Major Study Code: 12044)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
1,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,21,2ENM1600 Engineering Mathematics1,21,2ENG1100 Introduction to Engineering Design
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,32CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
Year 2
1,21ENG1003 Problem Solving in Engineering and the BuiltEnvironment
1,2,31,2MEC1201 Engineering Materials1,2,31,2ENG2002 Technology, Sustainability and Society22SVY1500 Spatial Science for Engineers
Year 2 Practice Courses
M2,31,2ENG1901 Engineering Practice 1
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208194© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Civil Engineering (Major Study Code: 12044)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 3
Pre-requisite: CIV1500 orCIV1501 or Students must be
11ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPR
Approved Course (Select from the approved course list)#
Pre-requisite: CIV1501 orCIV1500 or Students must be
22CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPR
Approved Course (Select from the approved course list)#
Year 3 Practice Courses
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,32CIV2901 Geology and Geomechanics Practice
Pre-requisite or Co-requisite:ENV2103 or ENV1101
M1,2,32ENV2902 Hydraulics Practice
Year 4
11CIV2605 Construction EngineeringPre-requisite: MAT1500 orENG1500 or ENM1500 or
11CIV2701 Road Design and Location
ENM1600 or Students mustbe enrolled in one of the following Programs: GCST orGDST or GCEN or GEPR
22CIV2502 Structural and Building TechnologyPre-requisite: ENV2103 orENV1101
22CIV2702 Municipal Services#
Year 4 Practice Courses
Pre-requisite: MEC1201 andENG1901 or Students must
M31CIV3906 Civil Materials Practice
be enrolled in one of the following programs: ADCN orBCON or BCNH
Year 5
1,31ENG3003 Engineering Management†
Pre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: (ENG1100 andMEC2402) or (ENG1100 and
22CIV2503 Structural Design I
CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in: GCEN or GEPR
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208195© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Civil Engineering (Major Study Code: 12044)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
22CMG2001 Job Organisation
Year 6
Approved Course (Select from the approved course list)#
Approved Course (Select from the approved course list)#
22ENV3105 HydrologyPre-requisite: (ENG2102 orENG1003 or ENG1101) and
1,21,2ENG3111 Technology Design Project
Undergraduate studentsmusthave completed 14 coursesin their program.
Year 6 Practice Courses
Pre-requisite: CIV2503 or Students must be enrolled in
M3CIV3907 Civil Systems Practice
one of the following Programs: MENS or MEPR
1,3ENG3909 Work Experience - Technologist
Approved Courses: Select any BENH (Civil Engineering) Core or Major course or any of the following:
2CIV3603 Construction Methods2,32,3ENG4004 Engineering Project and Operations
Management‡
11ENV2201 Land StudiesPre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology@
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS
1,31GIS1402 Geographic Information SystemsEnrolment is not permitted inREN1201 if REN8101 hasbeen previously completed.
11REN1201 Environmental Studies*
Pre-requisite: SVY1102 orSVY1500 or Students must
22SVY1104 Survey Computations A
be enrolled in one of the following Programs: GCST orGDST or MSPT
22URP3201 Sustainable Urban Design and DevelopmentPre-requisite: Students mustbe enrolled in the BENS engi
1,2ENG3300 Industry Experience Evaluation Portfolio
neering practice sub-planpathway.
FootnotesThis is a Pathway course. Please refer to Engineering pathways under Articulation.#The semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡Students who wish to enrol in ENV4204 Environmental Technology as an Approved course, should consult their Major Convenor.@Unavailable in on-campus mode at Springfield in 2022*
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208196© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Electrical and Electronic Engineering major full-time recommended enrolment pattern(Toowoomba and Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
On entering the Bachelor of Engineering Science in Electrical and Electronic Engineering external studentsare required to purchase a kit of tools comprising an electronic soldering iron, wire strippers, long nose pliers,diagonal cutter, safety glasses and an electronic prototyping 'breadboard'. These will first be required forELE2501 Electronic Workshop and Production and ELE1502 Electronic Circuits, and further details will beprovided on commencement of these courses. Additionally, all students enrolled in course ELE2501 ElectronicWorkshop and Production will be required to purchase an electronic kit costing approximately $80. ForELE2702 Electrical Measurement and Analysis, access to a digital multimeter and hook-up wire may berequired, together with the purchase of some electronic components.
Students who wish to complete a Pathway to another degree in Electrical and Electronic Engineering, ComputerSystems Engineering or Power Engineering should seek advice from the Faculty of Health, Engineering andSciences before enrolling in their courses.
Major study: Electrical and Electronic Engineering (Major Study Code: 12047)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,211ENG1003 Problem Solving in Engineering and the BuiltEnvironment
1,211ENM1600 Engineering Mathematics111ELE1301 Computer Engineering111ELE1502 Electronic Circuits1,221ENG1002 Introduction to Engineering and Built
Environment Applications1,221ENG1100 Introduction to Engineering Design1,2,321MEC1201 Engineering Materials
Pre-requisite: ENM1500 orENM1600 or Students must
2,321ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
Practice Courses Year 1
M2,31,21ENG1901 Engineering Practice 1M321ELE1911 Electrical and Electronic Practice A
Academic Courses Year 2
1,2,312ENG2002 Technology, Sustainability and Society112ELE2303 Embedded Systems Design
Pre-requisite: (ENG1500 orMAT1500 or ENM1500 or
112ELE2702 Electrical Measurement and Analysis
ENM1600) and ELE1801 orStudents must be enrolled inthe following Program: GCENPre-requisite: (ELE1502 andELE1801) or Students must
112ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETC or GEPR
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208197© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 12047)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: ENM1500 orENM1600 or Students must
222ELE2101 Control and Instrumentation#
be enrolled in one of the following Programs: MEPR orGCEN or GEPRPre-requisite: (ELE1502 andELE1301) or Students must
222ELE2501 Electronic Workshop and Production
be enrolled in the followingProgram: GCEN
222Approved Course (Select from the Approved Course list)#
Pre-requisite: ELE1502 or Students must be enrolled in
222ELE2503 Electronic Systems#
the following Program: GCENor GEPR
Practice Courses Year 2
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
M312ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENSPre-requisite: (ELE1301 andELE1502 and ELE1801) or
2ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENS
Academic Courses Year 3
Pre-requisite: ELE1801 or Students must be enrolled in
113ELE3803 Electrical Plant
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR
1,313ENG3003 Engineering Management†
113Approved Course (Select from the Approved Course list)#
113Approved Course (Select from the Approved Course list)#
Pre-requisite: (ELE1502 andELE1801) or Students must
223ELE3805 Power Electronics Principles and Applications
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
223ELE3506 Electronic Measurement
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENS
223Approved Course (Select from the Approved Course list)#
Pre-requisite: (ENG2102 orENG1003 or ENG1101) and
1,223ENG3111 Technology Design Project
Undergraduate studentsmust
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208198© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 12047)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
have completed 14 coursesin their program.
Practice Courses Year 3
Pre-requisite: (ELE1801 andELE1301 and ELE1502) or
M313ELE3914 Electrical and Electronic Practice D
Students must be enrolled inone of the following Programs: MENS or MEPR
1,3ENG3909 Work Experience - Technologist
Approved Courses: Select any BENH (Electrical and Electronic Engineering) Core or Major courseor any of the following:
Pre-requisite: ELE1801 or Students must be enrolled in
2ELE2704 Electricity Supply Systems
one of the following Programs: MEPR or GCEN or METCor GEPRPre-requisite: ELE1801 or Students must be enrolled in
1ELE3804 Power Systems Protection
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
11ELE3807 Power Systems Analysis2,32,3ENG4004 Engineering Project and Operations
Management‡
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,32CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
1,2,31,2CSC1401 Foundation Programming*
Pre-requisite: CSC1401 orStudents must be enrolled in
11CSC2402 Object-Oriented Programming in C++
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTNPre-requisite: CIV1500 orCIV1501
2MEC1501 Introduction to Industrial Processes
Pre-requisite: CIV1500 orCIV1501 or Students must be
22MEC2106 Introduction to Thermofluids
enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENS or GEPRPre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: CIV1501 or Students must be enrolled inthe following Program: GCEN
11MEC2405 Machine Dynamics
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208199© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 12047)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: ELE2103 or(MEC1501 and ELE2101 as
2MEC2501 Process Control Systems
Co-requisite or Pre-requisite)or Students must be enrolledin the following Program:GEPR
HR11CHE1110 Chemistry 1^
Pre-requisite: Students mustbe enrolled in the BENS engi
1,2ENG3300 Industry Experience Evaluation Portfolio
neering practice sub-planpathway.
FootnotesThis is a Pathway course. Please refer to Engineering pathways under Articulation.#The semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡This is a Pathway course for students intending to complete the BENH (Computer Systems Engineering). Please refer to Engineering pathwaysunder Articulation
*
CHE1110 Chemistry 1 has a highly recommended residential school component in External mode.^
Electrical and Electronic Engineering major part-time recommended enrolment pattern(Toowoomba and Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
On entering the Bachelor of Engineering Science in Electrical and Electronic Engineering, external studentsare required to purchase a kit of tools comprising an electronic soldering iron, wire strippers, long nose pliers,diagonal cutter, safety glasses and an electronic prototyping 'breadboard'. These will first be required forELE2501 Electronic Workshop and Production and ELE1502 Electronic Circuits, and further details will beprovided on commencement of these courses. Additionally, all students enrolled in course ELE2501 ElectronicWorkshop and Production will be required to purchase an electronic kit costing approximately $80. ForELE2702 Electrical Measurement and Analysis, access to a digital multimeter and hook-up wire may berequired, together with the purchase of some electronic components.
Students who wish to complete a Pathway to another degree in Electrical and Electronic Engineering, ComputerSystems Engineering or Power Engineering should seek advice from the Faculty of Health, Engineering andSciences before enrolling in their courses.
Major study: Electrical and Electronic Engineering (Major Study Code: 12047)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
1,21ENG1003 Problem Solving in Engineering and the BuiltEnvironment
1,21,2ENM1600 Engineering Mathematics1,21,2ENG1002 Introduction to Engineering and Built
Environment Applications1,21,2ENG1100 Introduction to Engineering Design
Year 1 Practice Courses
M2,31,2ENG1901 Engineering Practice 1
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081100© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 12047)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 2
11ELE1301 Computer Engineering11ELE1502 Electronic Circuits1,2,31,2MEC1201 Engineering Materials
Pre-requisite: ENM1500 orENM1600 or Students must
2,32ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
Year 2 Practice Courses
M32ELE1911 Electrical and Electronic Practice A
Year 3
1,2,31,2ENG2002 Technology, Sustainability and Society11ELE2303 Embedded Systems Design
Pre-requisite: ENM1500 orENM1600 or Students must
22ELE2101 Control and Instrumentation#
be enrolled in one of the following Programs: MEPR orGCEN or GEPRPre-requisite: (ELE1502 andELE1301) or Students must
22ELE2501 Electronic Workshop and Production
be enrolled in the followingProgram: GCEN
Year 3 Practice Courses
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
M31ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENS
Year 4
Pre-requisite: (ENG1500 orMAT1500 or ENM1500 or
11ELE2702 Electrical Measurement and Analysis
ENM1600) and ELE1801 orStudents must be enrolled inthe following Program: GCENPre-requisite: (ELE1502 andELE1801) or Students must
11ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETC or GEPR
Approved Course (Select from the Approved Course list)#
Pre-requisite: ELE1502 or Students must be enrolled in
22ELE2503 Electronic Systems#
the following Program: GCENor GEPR
Year 4 Practice Courses
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
2ELE2913 Electrical and Electronic Practice C
Students must be enrolled in
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081101© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 12047)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
one of the following Programs: GDNS or MENS
Year 5
Pre-requisite: ELE1801 or Students must be enrolled in
11ELE3803 Electrical Plant
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR
1,31ENG3003 Engineering Management†
Pre-requisite: (ELE1502 andELE1801) or Students must
22ELE3805 Power Electronics Principles and Applications
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
22ELE3506 Electronic Measurement
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENS
Year 5 Practice Courses
Pre-requisite: (ELE1801 andELE1301 and ELE1502) or
M31ELE3914 Electrical and Electronic Practice D
Students must be enrolled inone of the following Programs: MENS or MEPR
Year 6
Approved Course (Select from the Approved Course list)#
Approved Course (Select from the Approved Course list)#
Approved Course (Select from the Approved Course list)#
Pre-requisite: (ENG2102 orENG1003 or ENG1101) and
1,21,2ENG3111 Technology Design Project
Undergraduate studentsmusthave completed 14 coursesin their program.
Year 6 Practice Courses
1,3ENG3909 Work Experience - Technologist
Approved Courses: Select any BENH (Electrical and Electronic Engineering) Core or Major courseor any of the following:
Pre-requisite: ELE1801 or Students must be enrolled in
2ELE2704 Electricity Supply Systems
one of the following Programs: MEPR or GCEN or METCor GEPRPre-requisite: ELE1801 or Students must be enrolled in
1ELE3804 Power Systems Protection
one of the following Program
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081102© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 12047)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
s: GCEN or METC or MEPRor GCNS or GDNS or MENS
11ELE3807 Power Systems Analysis2,32,3ENG4004 Engineering Project and Operations
Management‡
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,32CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
1,2,31,2CSC1401 Foundation Programming*
Pre-requisite: CSC1401 orStudents must be enrolled in
11CSC2402 Object-Oriented Programming in C++
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTNPre-requisite: CIV1500 orCIV1501
2MEC1501 Introduction to Industrial Processes
Pre-requisite: CIV1500 orCIV1501 or Students must be
22MEC2106 Introduction to Thermofluids
enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENS or GEPRPre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: CIV1501 or Students must be enrolled inthe following Program: GCEN
11MEC2405 Machine Dynamics
Pre-requisite: ELE2103 or(MEC1501 and ELE2101 as
2MEC2501 Process Control Systems
Co-requisite or Pre-requisite)or Students must be enrolledin the following Program:GEPR
HR11CHE1110 Chemistry 1^
Pre-requisite: Students mustbe enrolled in the BENS engi
1,2ENG3300 Industry Experience Evaluation Portfolio
neering practice sub-planpathway.
FootnotesThis is a Pathway course. Please refer to Engineering pathways under Articulation.#The semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡This is a Pathway course for students intending to complete the BENH (Computer Systems Engineering). Please refer to Engineering pathwaysunder Articulation
*
CHE1110 Chemistry 1 has a highly recommended residential school component in External mode.^
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081103© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Environmental Engineering major full-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Students who wish to complete a Pathway to another degree in Environmental Engineering should seek advicefrom the Faculty of Health, Engineering and Sciences before enrolling in their courses.
Major study: Environmental Engineering (Major Study Code: 12045)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,211ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,211ENM1600 Engineering Mathematics1,211ENG1003 Problem Solving in Engineering and the Built
Environment1,2,311MEC1201 Engineering Materials1,221ENG1100 Introduction to Engineering Design
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,321CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
1,2,321ENG2002 Technology, Sustainability and Society221SVY1500 Spatial Science for Engineers
Practice Courses Year 1
M2,311ENG1901 Engineering Practice 1
Academic Courses Year 2
112ENV2105 Applied Chemistry and MicrobiologyPre-requisite: CIV1500 orCIV1501 or Students must be
112ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPR
112ENV2201 Land Studies112Approved Course (Select from the Approved Course list)#
1,2,322Approved Course (Select from the Approved Course list)#
Pre-requisite: CIV1501 orCIV1500 or Students must be
222CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPR
222ENV3105 Hydrology222Approved Course (Select from the Approved Course list)#
Practice Courses Year 2
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,322CIV2901 Geology and Geomechanics Practice
Pre-requisite or Co-requisite:ENV2103 or ENV1101
M1,2,322ENV2902 Hydraulics Practice
M3AGR2902 Field Practice^
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081104© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Environmental Engineering (Major Study Code: 12045)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 3
1,313ENG3003 Engineering Management†
Pre-requisite: ENV2105 orStudents must be enrolled in
113ENV4204 Environmental Technology
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS
113AGR3304 Soil Science113Approved Course (Select from the Approved Course list)#
Pre-requisite: ENV1101 orENV2103 or Students must
223ENV4203 Public Health Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENV2105 andENV2103 or Students must
223ENV3103 Environmental Pollution
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS or GEPRPre-requisite: AGR3304 orStudents must be enrolled in
223ENV4106 Irrigation Science
one of the following Programs: GCEN or GCSC or GDSIor METC or MEPR or GCNSor GDNS orMENS orMSCN.Pre-requisite: (ENG2102 orENG1003 or ENG1101) and
1,223ENG3111 Technology Design Project
Undergraduate studentsmusthave completed 14 coursesin their program.
Practice Courses Year 3
Pre-requisite: ENV4203 orStudents must be enrolled in
M3ENV3904 Environmental Engineering Practice
one of the following Programs: GDNS or MENS or MEPRor GEPR
M2AGR3903 Soil and Water Engineering Practice 21,3ENG3909 Work Experience - Technologist
Approved Courses: Select any BENH (Environmental Engineering) Core or Major course or any ofthe following:
22AGR2301 Agricultural Science22AGR3305 Precision and Smart Technologies in
Agriculture22CIV3703 Transport Engineering2CLI2201 Climate Change and Variability2,32,3ENG4004 Engineering Project and Operations
Management‡
1,31GIS1402 Geographic Information Systems
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081105© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Environmental Engineering (Major Study Code: 12045)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Co-requisite: LAW1101 orLAW1500 or ENG2002 or
11LAW2107 Environmental Law*
REN1201 or (Students enrolled in BEDU (Legal Studies) or BLAW or LLBP orBALW or BBLA or BCLA orBCLW & Co-requisiteLAW1201 or LAW1111) or(Students enrolled in DJUR& Co-requisite LAW5501 orLAW5111)Enrolment is not permitted inREN1201 if REN8101 hasbeen previously completed.
11REN1201 Environmental Studies<
22URP3201 Sustainable Urban Design and Development11SVY3202 Photogrammetry and Remote Sensing
Pre-requisite: Students mustbe enrolled in the BENS engi
1,2ENG3300 Industry Experience Evaluation Portfolio
neering practice sub-planpathway.
FootnotesThis is a Pathway course. Please refer to Engineering pathways under Articulation.#The residential school for this course may involve overnight field trips for which each student will be responsible for their own accommodationcosts.
^
The semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡Not available in on-campus mode in 2022*Unavailable in on-campus mode at Springfield in 2022<
Environmental Engineering major part-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Students who wish to complete a Pathway to another degree in Environmental Engineering should seek advicefrom the Faculty of Health, Engineering and Sciences before enrolling in their courses.
Major study: Environmental Engineering (Major Study Code: 12045)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
1,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,21,2ENM1600 Engineering Mathematics1,21,2ENG1100 Introduction to Engineering Design
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,32CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
Year 1 Practice Courses
M2,31,2ENG1901 Engineering Practice 1
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081106© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Environmental Engineering (Major Study Code: 12045)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 2
1,21ENG1003 Problem Solving in Engineering and the BuiltEnvironment
1,2,31,2MEC1201 Engineering Materials1,2,31,2ENG2002 Technology, Sustainability and Society22SVY1500 Spatial Science for Engineers
Year 3
11ENV2105 Applied Chemistry and MicrobiologyPre-requisite: CIV1500 orCIV1501 or Students must be
11ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPR
Approved Course (Select from the Approved Course list)#
Pre-requisite: CIV1501 orCIV1500 or Students must be
22CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPR
Year 3 Practice Courses
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,32CIV2901 Geology and Geomechanics Practice
Pre-requisite or Co-requisite:ENV2103 or ENV1101
M1,2,32ENV2902 Hydraulics Practice
Year 4
11ENV2201 Land Studies
Approved Course (Select from the Approved Course list)#
22ENV3105 Hydrology
Approved Course (Select from the Approved Course list)#
Year 4 Practice Courses
M3AGR2902 Field Practice^
Year 5
1,31ENG3003 Engineering Management†
Pre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENSPre-requisite: ENV1101 orENV2103 or Students must
22ENV4203 Public Health Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENV2105 andENV2103 or Students must
223]ENV3103 Environmental Pollution
be enrolled in one of the following Programs: GCEN or
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081107© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Environmental Engineering (Major Study Code: 12045)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
METC or MEPR or GCNS orGDNS or MENS or GEPR
Year 5 Practice Courses
Pre-requisite: ENV4203 orStudents must be enrolled in
M3ENV3904 Environmental Engineering Practice
one of the following Programs: GDNS or MENS or MEPRor GEPR
Year 6
11AGR3304 Soil Science
Approved Course (Select from the Approved Course list)#
Pre-requisite: AGR3304 orStudents must be enrolled in
22ENV4106 Irrigation Science
one of the following Programs: GCEN or GCSC or GDSIor METC or MEPR or GCNSor GDNS orMENS orMSCN.Pre-requisite: (ENG2102 orENG1003 or ENG1101) and
1,21,2ENG3111 Technology Design Project
Undergraduate studentsmusthave completed 14 coursesin their program.
Year 6 Practice Courses
M2AGR3903 Soil and Water Engineering Practice 21,3ENG3909 Work Experience - Technologist
Approved Courses: Select any BENH (Environmental Engineering) Core or Major course or any ofthe following:
22AGR2301 Agricultural Science22AGR3305 Precision and Smart Technologies in
Agriculture22CIV3703 Transport Engineering2CLI2201 Climate Change and Variability2,32,3ENG4004 Engineering Project and Operations
Management‡
1,31GIS1402 Geographic Information SystemsCo-requisite: LAW1101 orLAW1500 or ENG2002 or
11LAW2107 Environmental Law*
REN1201 or (Students enrolled in BEDU (Legal Studies) or BLAW or LLBP orBALW or BBLA or BCLA orBCLW & Co-requisiteLAW1201 or LAW1111) or(Students enrolled in DJUR& Co-requisite LAW5501 orLAW5111)Enrolment is not permitted inREN1201 if REN8101 hasbeen previously completed.
11REN1201 Environmental Studies<
22URP3201 Sustainable Urban Design and Development11SVY3202 Photogrammetry and Remote Sensing
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081108© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Environmental Engineering (Major Study Code: 12045)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: Students mustbe enrolled in the BENS engi
1,2ENG3300 Industry Experience Evaluation Portfolio
neering practice sub-planpathway.
FootnotesThis is a Pathway course. Please refer to Engineering pathways under Articulation.#The residential school for this course may involve overnight field trips for which each student will be responsible for their own accommodationcosts.
^
The semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡Not available in on-campus mode in 2022*Unavailable in on-campus mode at Springfield in 2022<
Infrastructure Management Engineering major full-time recommended enrolmentpattern (Toowoomba and Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Major study: Infrastructure Management Engineering (Major Study Code: 18502)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,211ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,211ENM1600 Engineering Mathematics1,211ENG1003 Problem Solving in Engineering and the Built
Environment1,2,311MEC1201 Engineering Materials
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,321CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
1,221ENG1100 Introduction to Engineering Design2,321Approved Course (Select from the Approved Course list)221SVY1500 Spatial Science for Engineers
Practice Courses Year 1
M2,311ENG1901 Engineering Practice 1
Academic Courses Year 2
112MGT1001 Foundations of Human Resource Management112MGT1000 Organisational Behaviour
Pre-requisite: CIV1500 orCIV1501 or Students must be
112ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPR
112CIV2605 Construction Engineering1,2,322ENG2002 Technology, Sustainability and Society
Pre-requisite: Students enrolled in one of the following
2,322LAW1500 Introduction to Business and Company Law
Programs: LLBP or BLAW or
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081109© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Infrastructure Management Engineering (Major Study Code: 18502)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
BABL or BALW or BBBL orBBLA or BCLA or BCLW arenot eligible for enrolment Enrolment is not permitted inLAW1500 if LAW1101 hasbeen previously completed
222CIV2502 Structural and Building TechnologyPre-requisite: CIV1501 orCIV1500 or Students must be
222CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPR
Practice Courses Year 2
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,322CIV2901 Geology and Geomechanics Practice
Academic Courses Year 3
1,313ENG3003 Engineering Management†
1,2,313ACC1101 Accounting for Decision-Making113MGT2001 Risk Mitigation, Work Health and Safety113Approved Course (Select from the Approved Course list)
Pre-requisite: (ENG1100 andMEC2402) or (ENG1100 and
223CIV2503 Structural Design I
CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in: GCEN or GEPR
223CMG2001 Job Organisation2CIV3603 Construction Methods
Pre-requisite: (ENG2102 orENG1003 or ENG1101) and
1,223ENG3111 Technology Design Project
Undergraduate studentsmusthave completed 14 coursesin their program.
Practice Courses Year 3
Pre-requisite: MEC1201 andENG1901 or Students must
M313CIV3906 Civil Materials Practice
be enrolled in one of the following programs: ADCN orBCON or BCNH
1,3ENG3909 Work Experience - Technologist
Select approved courses from the following or other elective courses as approved by the Major Convenor
Any approved Bachelor of Engineering (Honours) (Civil Engineering) course OR
Pre-requisite: CIV2503 or Students must be enrolled in
11CIV3506 Concrete Structures
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
11ENV2201 Land Studies
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081110© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Infrastructure Management Engineering (Major Study Code: 18502)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
11URP1001 Introduction to Urban and Regional Planning2,32,3ENG4004 Engineering Project and Operations
Management‡
FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡
Infrastructure Management Engineering major part-time recommended enrolmentpattern (Toowoomba and Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Major study: Infrastructure Management Engineering (Major Study Code: 18502)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
1,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,21,2ENM1600 Engineering MathematicsPre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,32CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
1,21,2ENG1100 Introduction to Engineering Design
Year 2
1,21ENG1003 Problem Solving in Engineering and the BuiltEnvironment
1,2,31,2MEC1201 Engineering MaterialsApproved Course (Select from the Approved Course list)
22SVY1500 Spatial Science for Engineers
Year 2 Practice Courses
M2,31,2ENG1901 Engineering Practice 1
Year 3
11MGT1001 Foundations of Human Resource Management1,2,31MGT1000 Organisational Behaviour1,2,31,2ENG2002 Technology, Sustainability and Society
Pre-requisite: Students enrolled in one of the following
1,2,31,2LAW1500 Introduction to Business and Company Law
Programs: LLBP or BLAW orBABL or BALW or BBBL orBBLA or BCLA or BCLW arenot eligible for enrolment Enrolment is not permitted inLAW1500 if LAW1101 hasbeen previously completed
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081111© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Infrastructure Management Engineering (Major Study Code: 18502)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 4
Pre-requisite: CIV1500 orCIV1501 or Students must be
11ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPR
11CIV2605 Construction Engineering22CIV2502 Structural and Building Technology
Pre-requisite: CIV1501 orCIV1500 or Students must be
22CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPR
Year 4 Practice Courses
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,32CIV2901 Geology and Geomechanics Practice
Year 5
1,31ENG3003 Engineering Management†
1,2,31,2ACC1101 Accounting for Decision-MakingPre-requisite: (ENG1100 andMEC2402) or (ENG1100 and
22CIV2503 Structural Design I
CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in: GCEN or GEPR
22CMG2001 Job Organisation
Year 5 Practice Courses
Pre-requisite: MEC1201 andENG1901 or Students must
M31CIV3906 Civil Materials Practice
be enrolled in one of the following programs: ADCN orBCON or BCNH
Year 6
11MGT2001 Risk Mitigation, Work Health and SafetyApproved Course (Select from the Approved Course list)
2CIV3603 Construction MethodsPre-requisite: (ENG2102 orENG1003 or ENG1101) and
1,21,2ENG3111 Technology Design Project
Undergraduate studentsmusthave completed 14 coursesin their program.
Year 6 Practice Courses
1,3ENG3909 Work Experience - Technologist
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081112© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Infrastructure Management Engineering (Major Study Code: 18502)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Select approved courses from the following or other elective courses as approved by the Major Convenor
Any approved Bachelor of Engineering (Honours) (Civil Engineering) course OR
Pre-requisite: CIV2503 or Students must be enrolled in
11CIV3506 Concrete Structures
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
11ENV2201 Land Studies11URP1001 Introduction to Urban and Regional Planning2,32,3ENG4004 Engineering Project and Operations
Management‡
FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡
Mechanical Engineering major full-time recommended enrolment pattern (Toowoombaand Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Students enrolling in this major can choose to study a Minor in Control and Automation. Students who choosethis minor must study the courses listed in the Minor instead of approved courses.
Students who wish to complete a Pathway to another degree in Mechanical Engineering should seek advicefrom the Faculty of Health, Engineering and Sciences before enrolling in their courses.
Major study: Mechanical Engineering (Major Study Code: 12048)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
Academic Courses
1,211ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,211ENG1003 Problem Solving in Engineering and the BuiltEnvironment
1,211ENM1600 Engineering Mathematics1,211ENG1100 Introduction to Engineering Design
Practice Courses
M2,311ENG1901 Engineering Practice 1
Academic Courses
1,2,321MEC1201 Engineering Materials1,2,321ENG2002 Technology, Sustainability and Society
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,321CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081113© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Mechanical Engineering (Major Study Code: 12048)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
221MEC2304 Solid Modelling
Year 2
Academic Courses
Pre-requisite: MEC1201 orStudents must be enrolled in
112MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCEN
112Approved Course (Select from the Approved Course list)#
Pre-requisite: CIV1501 or Students must be enrolled in
112MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: CIV1501 or Students must be enrolled inthe following Program: GCEN
112MEC2405 Machine Dynamics#
Practice Courses
M312MEC2901 Mechanical Practice 1M112MEC2902 Mechanical Practice 2
Academic Courses
Pre-requisite: CIV1500 orCIV1501 or Students must be
222MEC2106 Introduction to Thermofluids
enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENS or GEPRPre-requisite: ENM1500 orENM1600 or Students must
2,322ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPRPre-requisite: (MEC2402 andENG1100) or Students must
222MEC2301 Design of Machine Elements
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
222Approved Course (Select from the Approved Course list)#
Practice Courses
M322MEC3903 Mechanical Practice 3
Year 3
Academic Courses
Pre-requisite: (MEC2106 andENM1600) or Students must
113MEC3107 Thermofluids
be enrolled in one of the following Programs: GCNS orGDNS or MENS Studentscannot enrol in MEC3107 ifthey have successfully com
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081114© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Mechanical Engineering (Major Study Code: 12048)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
pleted, or are currently enrolled in, MEC2101 orMEC3102
1,313ENG3003 Engineering Management†
Pre-requisite: MEC1201 orStudents must be enrolled in
113MEC3203 Materials Technology
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENS
113Approved Course (Select from the Approved Course list)#
Practice Courses
1,3ENG3909 Work Experience - Technologist
Academic Courses
223Approved Course (Select from the Approved Course list)#
223Approved Course (Select from the Approved Course list)#
Pre-requisite: (ENG2102 orENG1003 or ENG1101) and
1,223ENG3111 Technology Design Project
Undergraduate studentsmusthave completed 14 coursesin their program.
223MEC3204 Production Engineering
Practice Courses
Pre-requisite: MEC3102 orMEC2106 or Students must
M223MEC3904 Mechanical Practice 4
be enrolled in one of the following Programs: GDNS orMENS or MEPR
Select a minor study or any BENH (Mechanical Engineering) Core or Major course or any of thefollowing as Approved Courses:
2,32,3ENG4004 Engineering Project and Operations
Management‡
11AGR2302 Agricultural Machinery22CIV2502 Structural and Building Technology
11ELE1502 Electronic Circuits11ELE1301 Computer Engineering
Pre-requisite: ELE1801 or Students must be enrolled in
11ELE3803 Electrical Plant
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: (ENG1100 andMEC2402) or (ENG1100 and
22CIV2503 Structural Design I
CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in: GCEN or GEPR
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081115© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Mechanical Engineering (Major Study Code: 12048)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology@
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENSPre-requisite: Students mustbe enrolled in the BENS engi
1,2ENG3300 Industry Experience Evaluation Portfolio
neering practice sub-planpathway.
Minor (Control and Automation)
11ELE1502 Electronic Circuits11ELE1301 Computer Engineering11ELE2303 Embedded Systems Design
Pre-requisite: ENM1500 orENM1600 or Students must
22ELE2101 Control and Instrumentation
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
FootnotesThis is a Pathway course. Please refer to Engineering pathways under Articulation.#The semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡Students who wish to enrol in ENV4204 Environmental Technology as an Approved course, should consult their Major Convenor.@
Mechanical Engineering major part-time recommended enrolment pattern (Toowoombaand Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Students enrolling in this major can choose to study a Minor in Control and Automation. Students who choosethis minor must study the courses listed in the Minor instead of approved courses.
Students who wish to complete a Pathway to another degree in Mechanical Engineering should seek advicefrom the Faculty of Health, Engineering and Sciences before enrolling in their courses.
Major study: Mechanical Engineering (Major Study Code: 12048)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
Academic Courses
1,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,21ENG1003 Problem Solving in Engineering and the BuiltEnvironment
1,2,31,2MEC1201 Engineering Materials1,2,31,2ENG2002 Technology, Sustainability and Society
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081116© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Mechanical Engineering (Major Study Code: 12048)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 2
Academic Courses
1,21,2ENM1600 Engineering Mathematics1,21,2ENG1100 Introduction to Engineering Design
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,32CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
22MEC2304 Solid Modelling
Practice Courses
M2,31,2ENG1901 Engineering Practice 1
Year 3
Academic Courses
Pre-requisite: MEC1201 orStudents must be enrolled in
11MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCEN
Approved Course (Select from the Approved Course list)#
Pre-requisite: CIV1500 orCIV1501 or Students must be
22MEC2106 Introduction to Thermofluids
enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENS or GEPRPre-requisite: ENM1500 orENM1600 or Students must
2,32ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
Practice Courses
M31MEC2901 Mechanical Practice 1
Year 4
Academic Courses
Pre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: CIV1501 or Students must be enrolled inthe following Program: GCEN
11MEC2405 Machine Dynamics#
Pre-requisite: (MEC2402 andENG1100) or Students must
22MEC2301 Design of Machine Elements
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081117© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Mechanical Engineering (Major Study Code: 12048)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Approved Course (Select from the Approved Course list)#
Practice Courses
M11MEC2902 Mechanical Practice 2M32MEC3903 Mechanical Practice 3
Year 5
Academic Courses
Pre-requisite: (MEC2106 andENM1600) or Students must
11MEC3107 Thermofluids
be enrolled in one of the following Programs: GCNS orGDNS or MENS Studentscannot enrol in MEC3107 ifthey have successfully completed, or are currently enrolled in, MEC2101 orMEC3102
1,31ENG3003 Engineering Management†
22Approved Course (Select from the Approved Course list)#
22Approved Course (Select from the Approved Course list)#
Year 6
Academic Courses
Pre-requisite: MEC1201 orStudents must be enrolled in
11MEC3203 Materials Technology
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENS
11Approved Course (Select from the Approved Course list)#
Practice Courses
1,3ENG3909 Work Experience - Technologist
Academic Courses
Pre-requisite: (ENG2102 orENG1003 or ENG1101) and
1,21,2ENG3111 Technology Design Project
Undergraduate studentsmusthave completed 14 coursesin their program.
22MEC3204 Production Engineering
Practice Courses
Pre-requisite: MEC3102 orMEC2106 or Students must
M22MEC3904 Mechanical Practice 4
be enrolled in one of the following Programs: GDNS orMENS or MEPR
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081118© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Major study: Mechanical Engineering (Major Study Code: 12048)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Select a minor study or any BENH (Mechanical Engineering) Core or Major course or any of thefollowing as Approved Courses:
2,32,3ENG4004 Engineering Project and Operations
Management‡
11AGR2302 Agricultural Machinery22CIV2502 Structural and Building Technology
11ELE1502 Electronic Circuits11ELE1301 Computer Engineering
Pre-requisite: ELE1801 or Students must be enrolled in
11ELE3803 Electrical Plant
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: (ENG1100 andMEC2402) or (ENG1100 and
22CIV2503 Structural Design I
CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in: GCEN or GEPRPre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology@
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENSPre-requisite: Students mustbe enrolled in the BENS engi
1,2ENG3300 Industry Experience Evaluation Portfolio
neering practice sub-planpathway.
Minor (Control and Automation)
11ELE1502 Electronic Circuits11ELE1301 Computer Engineering11ELE2303 Embedded Systems Design
Pre-requisite: ENM1500 orENM1600 or Students must
22ELE2101 Control and Instrumentation
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
FootnotesThis is a Pathway course. Please refer to Engineering pathways under Articulation.#The semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡Students who wish to enrol in ENV4204 Environmental Technology as an Approved course, should consult their Major Convenor.@
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081119© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering Science (BENS) - BEngSci (2022)
Bachelor of Engineering Technology (BETC) - BEngTechQTAC code (Australian and New Zealand applicants): Toowoomba campus: 907902; Springfield campus:927902; External: 907905
This program is offered only to continuing students. No new admissions will be accepted. Students whoare interested in this study area should consider the BENS Bachelor of Engineering Science which willbe offered from S1 2014.
ExternalOn-campus
No new admissionsNo new admissionsStart:
Toowoomba, SpringfieldCampus:
Commonwealth supported placeCommonwealth supported placeFees:Domestic full fee paying placeDomestic full fee paying placeInternational full fee paying placeInternational full fee paying place
3 years full-time, 6 years part-time or externalStandard duration:
From: Associate Degree of EngineeringProgramarticulation: To: Bachelor of Engineering (Honours)
Notes:
Please note that the Civil Engineering major and the Infrastructure Management major (formerly known as Building and Construction Management)are the only two majors that are available on-campus at Springfield.
Contact us
Current students
Ask a questionFreecall (within Australia): 1800 007 252Phone (from outside Australia): +61 7 4631 2285Email [email protected]
Professional accreditationA graduate of this program is eligible to apply for graduate membership of Engineers Australia as anEngineering Technologist. After further professional development, a graduate member with a Bachelor ofEngineering Technology may apply for chartered status as an Engineering Technologist and, when granted,may use the post-nominal TMIEAust CEngT.
Program aimsTo equip graduates with the academic, personal, professional, and technical knowledge, skills and understandingrequired to commence practice as a Graduate Engineering Technologist in Australia or overseas withinappropriate social, cultural, industrial and environmental contexts.
Program objectivesThe objectives of the Bachelor of Engineering Technology program are:
● to enable students to acquire and demonstrate that they possess the specified graduate attributes andcapabilities;
● to enable students to acquire an appropriate level of technical competence in one of the following fields:Agricultural Engineering, Infrastructure Management; Civil Engineering; Computer Systems Engineering;Electrical and Electronic Engineering; Environmental Engineering; Mechanical Engineering or PowerEngineering;
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081120© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
● to enable students from diverse and non-traditional backgrounds and locations to enrol in the programand to provide them with opportunities to acquire the skills necessary to complete the program in thenormal time;
● to enable students to be empowered as learners through the provision of a wide range of teaching andlearning styles and modes, in their program;
● to ensure that all students, regardless of the mode of study, have equality of opportunity in acquiring thespecified graduate attributes and capabilities;
● to ensure that graduates are eligible for the Engineering Technologist Graduate grade of membershipwith Engineers Australia, and for membership of other appropriate professional bodies.
Admission requirementsTo be eligible for admission, applicants must satisfy the following requirements:
● have studied four semester units and achieved an exit assessment of 'Sound Achievement' or better in theQueensland Senior Secondary School subject: English and Mathematics B; or
● be able to demonstrate that they have achieved an equivalent standard in these subjects at another institution
and
● Australian applicants: have achieved a Queensland Overall Position (OP) band, or an equivalent Rankbased on qualifications and previous work experience, at or above the specified cut-off level
All students are required to satisfy the applicable English language requirements.
If students do not meet the English language requirements they may apply to study a University-approvedEnglish language program. On successful completion of the English language program, students may beadmitted to an award program.
Program fees
Commonwealth supported placeA Commonwealth supported place is where the Australian Government makes a contribution towards the costof a students' higher education and students pay a student contribution amount, which varies depending onthe courses undertaken. Students are able to calculate the fees for a particular course via the Course FeeSchedules.
Commonwealth Supported students may be eligible to defer their fees through a Government loan calledHECS-HELP.
Domestic full fee paying placeDomestic full fee paying places are funded entirely through the full fees paid by the student. Full fees varydepending on the courses that are taken. Students are able to calculate the fees for a particular course via theCourse Fee Schedule
Domestic full fee paying students may be eligible to defer their fees through a Government loan called FEE-HELP provided they meet the residency and citizenship requirements.
Australian citizens, Permanent Humanitarian Visa holders, Permanent Resident visa holders and New Zealandcitizens who will be resident outside Australia for the duration of their program pay full tuition fees and arenot eligible for FEE-Help.
International full fee paying placeInternational students pay full fees. Full fees vary depending on the courses that are taken and whether theyare studied on-campus, via distance education/online. Students are able to calculate the fees for a particularcourse via the Course Fee Schedules.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081121© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
Program structureThe Bachelor of Engineering Technology program consists of core, major study and Elective components.Students enrolled in the Bachelor of Engineering Technology program may undertake a professionalspecialisation in one of seven major discipline areas:
● Agricultural Engineering● Civil Engineering● Computer Systems Engineering● Electrical and Electronic Engineering● Environmental Engineering● Infrastructure Management● Mechanical Engineering● Power Engineering.
The Bachelor of Engineering Technology program comprises 24 academic and several practice units andinvolves three years of full-time study or six years of part-time study. The program is available in the on-campusmode and in the external mode of study. In order to be eligible for the award, students must complete theprogram within a maximum of five years of full-time study, or 10 years of part-time study, from the date oftheir initial enrolment.
The Faculty of Health, Engineering and Sciences may permit a student to enrol in an Elective course otherthan those specified for the accredited program. Students who wish to enrol in Elective courses other thanthose listed, must obtain written approval prior to enrolling in the course.
To satisfy the requirements of the program students must complete all of the Academic courses and the Practicecourses in the following tables that show the recommended enrolment patterns for on-campus and externalstudents. Students following a non-standard enrolment pattern should consult the course specification toascertain if a course is offered in another term.
The program structure for each of the major studies in the Bachelor of Engineering Technology is shown inthe following pages.
Required time limitsFull-time students have a maximum of five years to complete this program. Part-time students have a maximumof 10 years to complete this program.A pro-rata adjustment of the maximum time period will apply for those students who transfer from one modeof study to another. A pro-rata reduction in the maximum time period will apply to students who are admittedto a program with advanced standing.
Practical experienceTo be eligible to graduate from the Bachelor of Engineering Technology, students must obtain an aggregateof at least 45 days of suitable practical experience during their program. This experience may be in anengineering office or laboratory where the student would be working principally with professional engineersand engineering associates. It may, however, be preferable for students to spend some time in field or factoryactivities to gain insight into industrial practice and to see what is involved in converting designs into finishedproducts. Students are required to enrol in ENG3909 Work Experience - Technologist in the latter part oftheir program and keep a record of appropriate experience as specified in the Course Specification. The workexperience is to be endorsed by an appropriate person in the organisation providing the experience andsubmitted to the examiner. The student must meet all costs associated with the acquisition of practical experienceto satisfy this requirement. The record of work experience must be made available for perusal by the Facultyof Health, Engineering and Sciences upon request. The acceptability or otherwise of employment experience,and the period of that type of experience that may be credited towards the 45 days, will be determined by theExaminer of ENG3909 Work Experience - Technologist.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081122© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
IT requirementsAccess to an up-to-date computer is necessary. On-campus students can access appropriately equippedlaboratories, but should consider acquisition of their own computer. External students should be able to accessa computer with the following minimum standards as advised by the University. All students should haveaccess to email and the Internet via a computer running the latest versions of Internet web browsers such asInternet Explorer or Firefox. The University has a wireless network for on-campus students' computers. Inorder to take advantage of this facility and further enhance their on-campus learning environment, studentsshould consider purchasing a notebook/laptop computer with wireless connectivity. A notebook/laptop maybe required for some courses.
Residential schoolsThe attendance requirement of residential schools within this degree is indicated by the following letters: R= Recommended; HR = Highly Recommended; M = Mandatory. To find out more about residential schools,visit the Residential School Schedule to view specific dates for your degree, or visit the Policy and ProcedureLibrary.
External students are required to attend a number of residential schools during their program. These areassociated with Practice Courses and are normally conducted at the end of Semester 3 (February), or duringthe mid-semester recess in Semester 2 (September/October).
The majority of the practical and professional experience requirements for the program are contained withinthe major recommended enrolment pattern. These are zero unit courses, which are a compulsory part of theprogram, however they do not attract a student contribution charge for Australian Residents or a tuition feefor international students.
Students enrolled in the external offer of a Practice Course must attend the residential school for that course.In some cases students enrolled in the on-campus mode may also be required to attend the residential school.Students should only enrol in a Practice Course when they are able to attend the residential school for thatcourse. Practice Courses may not be taken earlier than shown except with the permission of the Schoolresponsible for the program. In some cases students may enrol in two Practice Courses in one term so theycan complete the two residential schools in a two-week period. The actual dates for each residential schoolare shown in the Residential School schedule in this Handbook.
Safety boots are compulsory in engineering laboratories for several of the Practice courses and are stronglyrecommended for all other Practice courses.
ArticulationStudents who have completed an Associate Diploma or Associate Degree program in Engineering at aQueensland university within the last five years may be able to claim up to a maximum of 16 units of advancedstanding in the Bachelor of Engineering Technology program if studying in the same discipline area. Studentswho have completed an Advanced Diploma program in engineering at a TAFE college within the last fiveyears are eligible to claim up to a maximum of 12 units of advanced standing if studying in the same disciplinearea provided appropriate modules from the national curriculum have been completed. Students holding anAssociate Diploma in Engineering who seek and gain significant advanced standing in the Bachelor ofEngineering Technology program in the same field of study are not entitled to use both awards after graduation.
Students who have completed a Bachelor of Engineering Technology program, or equivalent, within the lastfive years may normally be able to claim up to a maximum of 16 units of advanced standing in the Bachelorof Engineering. It is possible for students to be granted maximum credit (24 units) towards the Bachelor ofEngineering but this ONLY applies to students who have applied for, and been granted, approval to undertakethe 'Pathway to Bachelor of Engineering. The amount of credit granted depends upon the field of study andElectives completed in the Bachelor of Engineering Technology program and the field of study selected inthe Bachelor of Engineering.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081123© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
Exit pointsStudents who, for whatever reason, are unable to complete the Bachelor of Engineering Technology and whosatisfy all of the requirements of either the Associate Degree in Engineering or the Diploma of EngineeringStudies may be permitted to exit with that award.
Other informationEngineering Pathways
A special Pathway has been developed for students who intend to study the Bachelor of Engineering (Honours)once they have completed the Bachelor of Engineering Technology program. Pathway to the Bachelor ofEngineering (Honours) maximises the advanced standing (exemptions) students will receive in the Bachelorof Engineering (Honours) program. A Pathway to the Bachelor of Engineering (Honours) has been developedfor each of the following Bachelor of Engineering Technology majors into the equivalent Bachelor ofEngineering (Honours) major:
● Agricultural Engineering● Civil Engineering● Computer Systems Engineering● Electrical and Electronic Engineering● Environmental Engineering● Mechanical Engineering● Power Engineering
Pathway to the Bachelor of Engineering (Honours) has been specially developed for students who studypart-time. Full-time students may seek approval to follow the Pathway to the Bachelor of Engineering (Honours),but it is not timetabled for on-campus students.
Students must have the approval of the Faculty of Health, Engineering and Sciences to undertake the Pathwayto the Bachelor of Engineering (Honours). Students are strongly advised to consider and apply for approvalfor this Pathway as soon as possible in order to maximise the credit they will receive in the Bachelor of Engineering (Honours). This should be done prior to the commencement of the second year of studies if possible.
Before applying for approval students must demonstrate they have the ability to undertake the Bachelor ofEngineering (Honours) program by successfully completing the course ENM2600 Advanced EngineeringMathematics as one of their Electives. The Faculty will also consider a student's GPA before granting approval.
Once approval is granted, the Faculty will advise them of the courses they should study when granting approvalfor them to follow the Pathway to the Bachelor of Engineering (Honours).
Agricultural Engineering Major recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice Coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
The course AGR2902 Field Practice may involve overnight field trips for which each student will be responsiblefor their own accommodation costs. This course is not offered in the on-campus mode. On-campus studentsshould enrol in the external mode.
Agricultural Engineering Pathway
It is recommended that students wishing to continue into the Bachelor of Engineering (Honours) (AgriculturalEngineering) program using a Pathway should have completed at least eight courses with a GPA greater than
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081124© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
5. Pathway students should enrol in ENM2600 Advanced Engineering Mathematics, and ENG3104 EngineeringSimulations and Computations as electives.
Major study: Agricultural Engineering (Major Study Code: 16244)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
1,211,21ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,2111ENM1600 Engineering Mathematics1,2121ENG1100 Introduction to Engineering Design
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,3121CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
1,2211ENG11011,2,3211MEC1201 Engineering Materials2,3221ENG21022221SVY1500 Spatial Science for Engineers
312AGR2302 Agricultural MachineryPre-requisite: CIV1500 orCIV1501 or Students must be
1312ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPRPre-requisite: CIV1501 or Students must be enrolled in
1412MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR
1412Elective (Select from the Electives list)1,2,3322ENG2002 Technology, Sustainability and Society
Pre-requisite: CIV1501 orCIV1500 or Students must be
2322CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPR
2422AGR2301 Agricultural Science2422ENV3105 Hydrology1,3513ENG3003 Engineering Management†
1513AGR3304 Soil Science1613AGR3303 Agricultural Materials and Post-Harvest
Technologies1613AGR3305 Precision and Smart Technologies in Agriculture
Pre-requisite: AGR3304 orStudents must be enrolled in
2523ENV4106 Irrigation Science
one of the following Programs: GCEN or GCSC or GDSIor METC or MEPR or GCNSor GDNS orMENS orMSCN.
2523Elective (Select from the Electives list)2623Elective (Select from the Electives list)
Pre-requisite: (ENG2102 orENG1003 or ENG1101) and
2623ENG3111 Technology Design Project
Undergraduate studentsmust
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081125© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
Major study: Agricultural Engineering (Major Study Code: 16244)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
have completed 14 coursesin their program.
Practice Courses
C2,3211ENG1901 Engineering Practice 1^^
Pre-requisite or Co-requisite:ENG1901 and CIV2403
C2,3322CIV2901 Geology and Geomechanics Practice
Pre-requisite or Co-requisite:ENV2103 or ENV1101
C2,3322ENV2902 Hydraulics Practice
C342AGR2902 Field Practice^
C233AGR3903 Soil and Water Engineering Practice 2^
1,363ENG3909 Work Experience - Technologist^
Electives (Select from the following)
Any approved BEng (AgrEng) course OR
11ELE1301 Computer Engineering22ELE2103 Linear Systems and Control
Pre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
22ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENS
11ENV2201 Land StudiesPre-requisite: ENV1101 orENV2103 or Students must
11ENV3104 Hydraulics II
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENM1600 orStudents must be enrolled in
11ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCNPre-requisite: MEC1201 orStudents must be enrolled in
11MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCENPre-requisite: (MEC2402 andENG1100) or Students must
22MEC2301 Design of Machine Elements
be enrolled in one of the following Programs: MEPR orGCEN or GEPRPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
22MEC2401 Dynamics I
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENS or GEPRPre-requisite: MEC2301 orStudents must be enrolled in
22MEC3303 Mechanical and Mechatronic System Design
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081126© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
Major study: Agricultural Engineering (Major Study Code: 16244)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENSPre-requisite: MEC1201 orStudents must be enrolled in
11MEC3203 Materials Technology
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENS
FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†ENG1901 Engineering Practice 1 is the first in a series of Practice Courses designed to enable students to acquire engineering and professionalpractice skills, including practical and teamwork skills, problem solving and engineering judgement. It is designed principally to cater for the
^^
needs of recent school leavers and those lacking any significant experience of the engineering workforce. Students who have a trade certificateand who have been employed in the engineering industry for some time may be able to claim exemption from the course.On-campus students should enrol in the external mode.^
Civil Engineering Major recommended enrolment pattern (Toowoomba and Springfieldcampus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice Coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor both Toowoomba and Springfield campuses. Students following a non-standard enrolment pattern shouldconsult the course specification to ascertain if a course is offered in another term.
Pathways
It is recommended that students wishing to continue into the BENH Bachelor of Engineering (Honours) (CivilEngineering) program using a Pathway should have completed at least eight courses with a GPA greater than5. Pathway students should enrol in CIV3703 Transport Engineering instead of CIV2702 Municipal Servicesand enrol in ENM2600 Advanced Engineering Mathematics, , CIV3506 Concrete Structures and ENG3104Engineering Simulations and Computations as electives.
Major study: Civil Engineering (Major Study Code: 12044)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
1111ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,2111ENM1600 Engineering Mathematics1,2121ENG1100 Introduction to Engineering Design
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,3121CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
1,2211ENG11011,2,3211MEC1201 Engineering Materials2,3221ENG21022221SVY1500 Spatial Science for Engineers
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081127© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
Major study: Civil Engineering (Major Study Code: 12044)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: CIV1500 orCIV1501 or Students must be
1312ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPR
1312Elective (Select from the Electives list)#
1412CIV2605 Construction EngineeringPre-requisite: MAT1500 orENG1500 or ENM1500 or
1412CIV2701 Road Design and Location
ENM1600 or Students mustbe enrolled in one of the following Programs: GCST orGDST or GCEN or GEPRPre-requisite: CIV1501 orCIV1500 or Students must be
2322CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPR
1,2,3322ENG2002 Technology, Sustainability and Society2422CIV2502 Structural and Building Technology
Pre-requisite: ENV2103 orENV1101
2422CIV2702 Municipal Services#
1,3513ENG3003 Engineering Management†
Pre-requisite: CIV1501 or Students must be enrolled in
1513MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR
1613Elective (Select from the Electives list)#
1613Elective (Select from the Electives list)#
Pre-requisite: (ENG1100 andMEC2402) or (ENG1100 and
2523CIV2503 Structural Design I
CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in: GCEN or GEPR
2523CMG2001 Job Organisation2623ENV3105 Hydrology
Pre-requisite: (ENG2102 orENG1003 or ENG1101) and
2623ENG3111 Technology Design Project
Undergraduate studentsmusthave completed 14 coursesin their program.
Practice Courses
C2,321,21ENG1901 Engineering Practice 1^^
Pre-requisite or Co-requisite:ENG1901 and CIV2403
C2,3322CIV2901 Geology and Geomechanics Practice
Pre-requisite or Co-requisite:ENV2103 or ENV1101
C2,3322ENV2902 Hydraulics Practice
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081128© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
Major study: Civil Engineering (Major Study Code: 12044)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: MEC1201 andENG1901 or Students must
C3412CIV3906 Civil Materials Practice
be enrolled in one of the following programs: ADCN orBCON or BCNHPre-requisite: CIV2503 or Students must be enrolled in
C36CIV3907 Civil Systems Practice^
one of the following Programs: MENS or MEPR
1,363ENG3909 Work Experience - Technologist^
Electives (Select from the following)
Any approved BEng (Civil) course OR
2CIV3603 Construction MethodsPre-requisite: CIV2503 or Students must be enrolled in
11CIV3506 Concrete Structures*
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
22CIV3703 Transport EngineeringPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
22ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENS
2,32,3ENG4004 Engineering Project and Operations
Management‡
11ENV2201 Land StudiesPre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS
1,31GIS1402 Geographic Information SystemsPre-requisite: ENM1600 orStudents must be enrolled in
11ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCNEnrolment is not permitted inREN1201 if REN8101 hasbeen previously completed.
11REN1201 Environmental Studies
Pre-requisite: SVY1102 orSVY1500 or Students must
22SVY1104 Survey Computations A
be enrolled in one of the following Programs: GCST orGDST or MSPT
22URP3201 Sustainable Urban Design and DevelopmentPre-requisite: ENV1101 orENV2103 or Students must
22ENV4203 Public Health Engineering
be enrolled in one of the following Programs: GCEN or
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081129© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
Major study: Civil Engineering (Major Study Code: 12044)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
METC or MEPR or GCNS orGDNS or MENS
FootnotesThis is a Pathway to the Bachelor of Engineering course. Please refer to Other Information - Engineering Pathways at the beginning of thisprogram section.
#
The semester 3 offering of this course is offered in odd numbered years only.†ENG1901 Engineering Practice 1 is the first in a series of Practice Courses designed to enable students to acquire engineering and professionalpractice skills, including practical and teamwork skills, problem solving and engineering judgement. It is designed principally to cater for the
^^
needs of recent school leavers and those lacking any significant experience of the engineering workforce. Students who have a trade certificateand who have been employed in the engineering industry for some time may be able to claim exemption from the course.On-campus students should enrol in the external offering of this course.^Not available on-campus at Springfield in 2017.*The semester 3 offering of this course is offered in even numbered years only.‡
Computer Systems Engineering Major recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice Coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
With approval from the Faculty of Health, Engineering and Sciences, students may also enrol in courses fromother engineering, sciences or business programs. A maximum of one unit may be selected.
On entering the Bachelor of Engineering Technology in Computer Systems Engineering, external studentsare required to purchase a kit of tools comprising an electronic soldering iron, wire strippers, long nose pliers,diagonal cutter, safety glasses and an electronic prototyping 'breadboard'. These will first be required forELE2501 Electronic Workshop and Production and ELE1502 Electronic Circuits, and further details will beprovided on commencement of these courses. Additionally, all students enrolled in course ELE2501 will berequired to purchase an electronic kit costing approximately $50.
Students who have been granted an exemption in the course ELE1801 Electrical Technology are stronglyadvised to purchase the ELE1801 study materials from the USQ Bookshop and work through these toconsolidate their knowledge.
Pathways
The Pathway to the Bachelor of Engineering (Honours) program is available for this major. Please refer toOther Information - Engineering Pathways at the beginning of this program section.
Major study: Computer Systems Engineering (Major Study Code: 13274)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
1,2111CSC1401 Foundation Programming1,2211ENG11011,2111ENM1600 Engineering Mathematics1211ELE1301 Computer Engineering2,3221ENG21022221ELE1502 Electronic Circuits
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081130© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
Major study: Computer Systems Engineering (Major Study Code: 13274)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: ENM1500 orENM1600 or Students must
2,3121ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
211,21ENG1002 Introduction to Engineering and BuiltEnvironment Applications
Pre-requisite: CSC2402 orStudents must be enrolled in
1322CSC2401 Algorithms and Data Structures
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT
1412MAT1101 Discrete Mathematics for Computing1312ELE2303 Embedded Systems Design1,2422ENG1100 Introduction to Engineering Design
Pre-requisite: (ELE1502 andELE1301) or Students must
2322ELE2501 Electronic Workshop and Production#
be enrolled in the followingProgram: GCEN
1,2,3412ENG2002 Technology, Sustainability and Society1412Elective (Select from the Electives list)#
Pre-requisite: ENM1500 orENM1600 or Students must
2322ELE2101 Control and Instrumentation#
be enrolled in one of the following Programs: MEPR orGCEN or GEPRPre-requisite: CSC1401 orStudents must be enrolled in
1613CSC2402 Object-Oriented Programming in C++
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTN
1613ELE3305 Computer Systems and CommunicationsProtocols
1,3513ENG3003 Engineering Management†
Pre-requisite: (ELE1502 andELE1801) or Students must
1513ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETC or GEPRPre-requisite: (ENG2102 orENG1003 or ENG1101) and
2623ENG3111 Technology Design Project
Undergraduate studentsmusthave completed 14 coursesin their program.
2623Elective (Select from the Electives list)Pre-requisite: ELE1502 or Students must be enrolled in
2523ELE2503 Electronic Systems#
the following Program: GCENor GEPRPre-requisite: ELE1301 or Students must be enrolled in
2523ELE3307 Real Time Systems
one of the following Program
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081131© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
Major study: Computer Systems Engineering (Major Study Code: 13274)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
s: GCEN or GCNS or METCor MENS or MEPR
Practice Courses
C2,311,21ENG1901 Engineering Practice 1^^
C3221ELE1911 Electrical and Electronic Practice APre-requisite: (ELE1301 andELE1502 and ELE1801) or
C3312ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENSPre-requisite: (ELE1301 andELE1502 and ELE1801) or
C2523ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENS
1,363ENG3909 Work Experience - Technologist^
Pre-requisite: (ELE1801 andELE1301 and ELE1502) or
C2613ELE3914 Electrical and Electronic Practice D
Students must be enrolled inone of the following Programs: MENS or MEPR
Electives (Select from the following)
Pre-req: CSC2408; and Pre-req or Co-req: CSC2402; or
11CSC3403 Comparative Programming Languages
Students must be enrolled inone of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT Enrolmentis not permitted in CSC3403if CIS3001 has been previously completed
22ELE2103 Linear Systems and Control2,32,3ENG4004 Engineering Project and Operations
Management‡
Pre-requisite: CSC14011,22CSC2408 Software Development Tools
FootnotesThis is a Pathway to the Bachelor of Engineering course. Please refer to Other Information - Engineering Pathways at the beginning of thisprogram section.
#
The semester 3 offering of this course is offered in odd numbered years only.†ENG1901 Engineering Practice 1 is the first in a series of Practice Courses designed to enable students to acquire engineering and professionalpractice skills, including practical and teamwork skills, problem solving and engineering judgement. It is designed principally to cater for the
^^
needs of recent school leavers and those lacking any significant experience of the engineering workforce. Students who have a trade certificateand who have been employed in the engineering industry for some time may be able to claim exemption from the course.On-campus students should enrol in the external offering of this course.^The semester 3 offering of this course is offered in even numbered years only.‡
Electrical and Electronic Engineering Major recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice Coursesin the following table that shows the recommended enrolment patterns for on-campus and external students
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081132© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
for both Toowoomba and Springfield campuses. Students following a non-standard enrolment pattern shouldconsult the course specification to ascertain if a course is offered in another term.
Students wishing to further their knowledge of software may be allowed to choose one Elective from coursesoffered by the School of Agricultural, Computational and Environmental Sciences. Interested students shouldperuse the course specification to see what is available and then seek permission to undertake the course fromthe Faculty of Health, Engineering and Sciences. A maximum of one unit may be selected.
On entering the Bachelor of Engineering Technology in Electrical and Electronic Engineering external studentsare required to purchase a kit of tools comprising an electronic soldering iron, wire strippers, long nose pliers,diagonal cutter, safety glasses and an electronic prototyping 'breadboard'. These will first be required forELE2501 Electronic Workshop and Production and ELE1502 Electronic Circuits, and further details will beprovided on commencement of these courses. Additionally, all students enrolled in course ELE2501 will berequired to purchase an electronic kit costing approximately $50. For ELE2702, access to an analoguemultimeter and hook-up wire may be required, together with the purchase of some electronic components.
Students who have been granted an exemption in the course ELE1801 Electrical Technology are stronglyadvised to purchase the ELE1801 study materials from the USQ Bookshop and work through these prior toattempting ELE2702 or ELE3803.
Pathways
The Pathway to the Bachelor of Engineering (Honours) program is available for this major. Please refer toOther Information - Engineering Pathways at the beginning of this program section.
Major study: Electrical and Electronic Engineering (Major Study Code: 12047)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
1,2,3111MEC1201 Engineering Materials1,2211ENG11011,2111ENM1600 Engineering Mathematics1211ELE1301 Computer Engineering1,211,21ENG1002 Introduction to Engineering and Built
Environment Applications2,3221ENG21022221ELE1502 Electronic Circuits
Pre-requisite: ENM1500 orENM1600 or Students must
2,3121ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
1,2312ENG1100 Introduction to Engineering DesignPre-requisite: (ENG1500 orMAT1500 or ENM1500 or
1412ELE2702 Electrical Measurement and Analysis#
ENM1600) and ELE1801 orStudents must be enrolled inthe following Program: GCENPre-requisite: (ELE1502 andELE1801) or Students must
1412ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETC or GEPR
1312ELE2303 Embedded Systems DesignPre-requisite: (ELE1502 andELE1301) or Students must
2322ELE2501 Electronic Workshop and Production#
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081133© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 12047)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
be enrolled in the followingProgram: GCEN
2422Elective (Select from the Electives list)#
Pre-requisite: ELE1502 or Students must be enrolled in
2422ELE2503 Electronic Systems#
the following Program: GCENor GEPRPre-requisite: ENM1500 orENM1600 or Students must
2322ELE2101 Control and Instrumentation#
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
1,3613ENG3003 Engineering Management†
1613Elective (Select from the Electives list)#
Pre-requisite: ELE1801 or Students must be enrolled in
1513ELE3803 Electrical Plant
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR
1623Elective (Select from the Electives list)#
1,2,3513ENG2002 Technology, Sustainability and SocietyPre-requisite: (ENG2102 orENG1003 or ENG1101) and
2623ENG3111 Technology Design Project
Undergraduate studentsmusthave completed 14 coursesin their program.Pre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
2523ELE3506 Electronic Measurement
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENSPre-requisite: (ELE1502 andELE1801) or Students must
2523ELE3805 Power Electronics Principles and Applications
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
Practice Courses
C2,311,21ENG1901 Engineering Practice 1^^
C3221ELE1911 Electrical and Electronic Practice APre-requisite: (ELE1301 andELE1502 and ELE1801) or
C3312ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENSPre-requisite: (ELE1301 andELE1502 and ELE1801) or
C2422ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENS
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081134© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 12047)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: (ELE1801 andELE1301 and ELE1502) or
C2513ELE3914 Electrical and Electronic Practice D
Students must be enrolled inone of the following Programs: MENS or MEPR
1,363ENG3909 Work Experience - Technologist^
Electives (Select from the following)
Pre-requisite: ELE1801 or Students must be enrolled in
2ELE2704 Electricity Supply Systems
one of the following Programs: MEPR or GCEN or METCor GEPR
22ELE2103 Linear Systems and ControlPre-requisite: ELE1502 or Students must be enrolled in
22ELE2504 Electronic Design and Analysis
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN or GEPR
2,32,3ENG4004 Engineering Project and Operations
Management‡
11ELE3305 Computer Systems and CommunicationsProtocols
1ELE4109 Measurement Science & Instrument
Engineering>
Pre-requisite: ELE1801 or Students must be enrolled in
11ELE3804 Power Systems Protection
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
FootnotesThis is a Pathway to the Bachelor of Engineering course. Please refer to Other Information - Engineering Pathways at the beginning of thisprogram section.
#
The semester 3 offering of this course is offered in odd numbered years only.†ENG1901 Engineering Practice 1 is the first in a series of Practice Courses designed to enable students to acquire engineering and professionalpractice skills, including practical and teamwork skills, problem solving and engineering judgement. It is designed principally to cater for the
^^
needs of recent school leavers and those lacking any significant experience of the engineering workforce. Students who have a trade certificateand who have been employed in the engineering industry for some time may be able to claim exemption from the course.On-campus students should enrol in the external mode.^The semester 3 offering of this course is offered in even numbered years only.‡Offered Odd Years Only.>
Environmental Engineering Major recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice Coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
Pathways
It is recommended that students wishing to continue into the Bachelor of Engineering (Honours)(EnvironmentalEngineering) program using a Pathway should have completed at least eight courses with a GPA greater than
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081135© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
5. Pathway students should enrol in , ENM2600 Advanced Engineering Mathematics and ENG3104 EngineeringSimulations and Computations as electives.
Major study: Environmental Engineering (Major Study Code: 12045)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
1,211,21ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,2111ENM1600 Engineering Mathematics1,2121ENG1100 Introduction to Engineering Design1,2211ENG1101
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,3121CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
1,2,3211MEC1201 Engineering Materials2,3221ENG21022221SVY1500 Spatial Science for Engineers
Enrolment is not permitted inREN1201 if REN8101 hasbeen previously completed.
1312REN1201 Environmental Studies
Pre-requisite: CIV1500 orCIV1501 or Students must be
1312ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPR
1412ENV2201 Land Studies1412Elective (Select from the Electives list)#
1,2,3322ENG2002 Technology, Sustainability and SocietyPre-requisite: CIV1501 orCIV1500 or Students must be
2322CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPR
2422ENV3105 Hydrology2422AGR2301 Agricultural Science1,3513ENG3003 Engineering Management†
Pre-requisite: ENV2105 orStudents must be enrolled in
1513ENV4204 Environmental Technology
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS
1613AGR3304 Soil Science1613Elective (Select from the Electives list)#
Pre-requisite: ENV1101 orENV2103 or Students must
2523ENV4203 Public Health Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
2523Elective (Select from the Electives list)#
Pre-requisite: AGR3304 orStudents must be enrolled in
2623ENV4106 Irrigation Science
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081136© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
Major study: Environmental Engineering (Major Study Code: 12045)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
one of the following Programs: GCEN or GCSC or GDSIor METC or MEPR or GCNSor GDNS orMENS orMSCN.Pre-requisite: (ENG2102 orENG1003 or ENG1101) and
2623ENG3111 Technology Design Project
Undergraduate studentsmusthave completed 14 coursesin their program.
Practice Courses
C2,3111ENG1901 Engineering Practice 1^^
Pre-requisite or Co-requisite:ENG1901 and CIV2403
C2,3322CIV2901 Geology and Geomechanics Practice
Pre-requisite or Co-requisite:ENV2103 or ENV1101
C2,3322ENV2902 Hydraulics Practice
C342AGR2902 Field PracticePre-requisite: ENV4203 orStudents must be enrolled in
C353ENV3904 Environmental Engineering Practice^
one of the following Programs: GDNS or MENS or MEPRor GEPR
C263AGR3903 Soil and Water Engineering Practice 2^
1,363ENG3909 Work Experience - Technologist^
Electives (Select from the following)
Any approved BEng (Env) course OR
11AGR3305 Precision and Smart Technologies inAgriculture
11CHE1110 Chemistry 122CIV3703 Transport Engineering22CLI2201 Climate Change and Variability
Pre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
22ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENS
2,32,3ENG4004 Engineering Project and Operations
Management‡
1,31GIS1402 Geographic Information SystemsCo-requisite: LAW1101 orLAW1500 or ENG2002 or
11LAW2107 Environmental Law*
REN1201 or (Students enrolled in BEDU (Legal Studies) or BLAW or LLBP orBALW or BBLA or BCLA orBCLW & Co-requisiteLAW1201 or LAW1111) or(Students enrolled in DJUR& Co-requisite LAW5501 orLAW5111)
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081137© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
Major study: Environmental Engineering (Major Study Code: 12045)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: ENM1600 orStudents must be enrolled in
11ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCN
22URP3201 Sustainable Urban Design and Development11SVY3202 Photogrammetry and Remote Sensing
FootnotesThis is a Pathway to the Bachelor of Engineering course. Please refer to Other Information - Engineering Pathways at the beginning of thisprogram section.
#
The semester 3 offering of this course is offered in odd numbered years only.†ENG1901 Engineering Practice 1 is the first in a series of Practice Courses designed to enable students to acquire engineering and professionalpractice skills, including practical and teamwork skills, problem solving and engineering judgement. It is designed principally to cater for the
^^
needs of recent school leavers and those lacking any significant experience of the engineering workforce. Students who have a trade certificateand who have been employed in the engineering industry for some time may be able to claim exemption from the course.On-campus students should enrol in the external mode.^The semester 3 offering of this course is offered in even numbered years only.‡Springfield campus only*
Infrastructure Management Major recommended enrolment pattern (Toowoomba andSpringfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
(Formerly known as Building and Construction Management)
To satisfy the requirements of the program students must complete all of the Academic and Practice Coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor both Toowoomba and Springfield campuses. Students following a non-standard enrolment pattern shouldconsult the course specification to ascertain if a course is offered in another term.
Major study: Infrastructure Management (Major Study Code: 12046)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
1,211,21ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,2111ENM1600 Engineering Mathematics1,2121ENG1100 Introduction to Engineering Design1,2211ENG1101
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,3121CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
1,2,3211MEC1201 Engineering Materials2,3221ENG21022221SVY1500 Spatial Science for Engineers1312MGT1001 Foundations of Human Resource Management1312MGT1000 Organisational Behaviour1412MGT3100 ~
1412CIV2605 Construction EngineeringThis version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081
138© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
Major study: Infrastructure Management (Major Study Code: 12046)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
1,2,3322ENG2002 Technology, Sustainability and Society2,3322LAW11012422CIV2502 Structural and Building Technology
Pre-requisite: CIV1501 orCIV1500 or Students must be
2422CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPR
1,3513ENG3003 Engineering Management†
1,2513ACC1101 Accounting for Decision-Making1613MGT2001 Risk Mitigation, Work Health and Safety1613Elective (Select from the Electives list)
Pre-requisite: (ENG1100 andMEC2402) or (ENG1100 and
2523CIV2503 Structural Design I
CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in: GCEN or GEPR
2523CMG2001 Job Organisation263CIV3603 Construction Methods
Pre-requisite: (ENG2102 orENG1003 or ENG1101) and
2623ENG3111 Technology Design Project
Undergraduate studentsmusthave completed 14 coursesin their program.
Practice Courses
C2,3211ENG1901 Engineering Practice 1^^
Pre-requisite or Co-requisite:ENG1901 and CIV2403
C2,3422CIV2901 Geology and Geomechanics Practice
Pre-requisite: MEC1201 andENG1901 or Students must
C3513CIV3906 Civil Materials Practice
be enrolled in one of the following programs: ADCN orBCON or BCNH
1,363ENG3909 Work Experience - Technologist^
Electives (Select from the following)
Any approved BEng (Civil) course OR
Pre-requisite: CIV2503 or Students must be enrolled in
11CIV3506 Concrete Structures*
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
11ENV2201 Land Studies11URP42032,32,3ENG4004 Engineering Project and Operations
Management‡
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081139© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
FootnotesLast offering 2019~The semester 3 offering of this course is offered in odd numbered years only.†ENG1901 Engineering Practice 1 is the first in a series of Practice Courses designed to enable students to acquire engineering and professionalpractice skills, including practical and teamwork skills, problem solving and engineering judgement. It is designed principally to cater for the
^^
needs of recent school leavers and those lacking any significant experience of the engineering workforce. Students who have a trade certificateand who have been employed in the engineering industry for some time may be able to claim exemption from the course.On-campus students should enrol in the external mode.^Not available on-campus at Springfield in 2017.*The semester 3 offering of this course is offered in even numbered years only.‡
Mechanical Engineering Major recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice Coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
Pathways
The Pathway to the Bachelor of Engineering (Honours) program is available for this major. Please refer toOther Information - Engineering Pathways at the beginning of this program section.
Major study: Mechanical Engineering (Major Study Code: 12048)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
1,211,21ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,2111ENG11011,2211ENM1600 Engineering Mathematics1,2211ENG1100 Introduction to Engineering Design1,2,3121MEC1201 Engineering Materials2,3121ENG2102
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,3221CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
2221MEC2304 Solid Modelling1,2,3312ENG2002 Technology, Sustainability and Society
Pre-requisite: MEC1201 orStudents must be enrolled in
1312MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCENPre-requisite: CIV1501 or Students must be enrolled in
1412MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: CIV1501 or Students must be enrolled inthe following Program: GCEN
1412MEC2405 Machine Dynamics#
Pre-requisite: CIV1500 orCIV1501 or Students must be
2322MEC2106 Introduction to Thermofluids#
enrolled in one of the follow
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081140© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
Major study: Mechanical Engineering (Major Study Code: 12048)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
ing Programs: BENH or BEBC or BEHS or GCEN orMENS or GEPRPre-requisite: ENM1500 orENM1600 or Students must
2,3322ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPRPre-requisite: (MEC2402 andENG1100) or Students must
2422MEC2301 Design of Machine Elements
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
2422Elective (Select from the Electives list)#
1513MEC21011,3513ENG3003 Engineering Management†
Pre-requisite: MEC1201 orStudents must be enrolled in
1613MEC3203 Materials Technology
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENS
1613Elective (Select from the Electives list)#
2523Elective (Select from the electives list)#
Pre-requisite: MEC2301 orStudents must be enrolled in
2523MEC3303 Mechanical and Mechatronic System Design
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENSPre-requisite: (ENG2102 orENG1003 or ENG1101) and
2623ENG3111 Technology Design Project
Undergraduate studentsmusthave completed 14 coursesin their program.
2623MEC3204 Production Engineering
Practice Courses
C2,3211ENG1901 Engineering Practice 1^^
C3311MEC2901 Mechanical Practice 1C1412MEC2902 Mechanical Practice 2C2422MEC3903 Mechanical Practice 3
Pre-requisite: MEC3102 orMEC2106 or Students must
C2623MEC3904 Mechanical Practice 4
be enrolled in one of the following Programs: GDNS orMENS or MEPR
1,363ENG3909 Work Experience - Technologist^
Electives (Select from the following)
Pre-requisite: ((MEC2101andMEC3102) or MEC2106)
11MEC4104 Renewable Energy Technology
or Students must be enrolledin one of the following Programs: GCEN or GCNS or
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081141© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
Major study: Mechanical Engineering (Major Study Code: 12048)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
GDNS or METC or MENS orMEPR
2,32,3ENG4004 Engineering Project and Operations
Management‡
1AGR2302 Agricultural Machinery22CIV2502 Structural and Building Technology11MAT1102 Algebra and Calculus I22ELE1502 Electronic Circuits11ELE1301 Computer Engineering
Pre-requisite: ELE1801 or Students must be enrolled in
11ELE3803 Electrical Plant
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: (ENG1100 andMEC2402) or (ENG1100 and
22CIV2503 Structural Design I
CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in: GCEN or GEPRPre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS
FootnotesThis is a pathway to the Bachelor of Engineering. Please refer to Other Information - Engineering Pathways at the beginning of this programsection.
#
The semester 3 offering of this course is offered in odd numbered years only.†ENG1901 Engineering Practice 1 is the first in a series of Practice Courses designed to enable students to acquire engineering and professionalpractice skills, including practical and teamwork skills, problem solving and engineering judgement. It is designed principally to cater for the
^^
needs of recent school leavers and those lacking any significant experience of the engineering workforce. Students who have a trade certificateand who have been employed in the engineering industry for some time may be able to claim exemption from the course.On-campus students should enrol in the external mode.^The semester 3 offering of this course is offered in even numbered years only.‡
Power Engineering Major recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice Coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
Students wishing to further their knowledge of software may be allowed to choose one Elective from coursesoffered by the School of Agricultural, Computational and Environmental Sciences. Interested students shouldconsult the course specification to see what is available and then seek permission to undertake the course fromthe Faculty of Health, Engineering and Sciences. A maximum of one unit may be selected.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081142© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
On entering the Bachelor of Engineering Technology in Power Engineering external students are required topurchase a kit of tools comprising an electronic soldering iron, wire strippers, long nose pliers, diagonal cutter,safety glasses and an electronic prototyping 'breadboard'. These will first be required for ELE2501 ElectronicWorkshop and Production and ELE1502 Electronic Circuits, and further details will be provided oncommencement of these courses. Additionally, all students enrolled in course ELE2501 will be required topurchase an electronic kit costing approximately $50. For ELE2702, access to an analogue multimeter andhook-up wire may be required, together with the purchase of some electronic components.
Students who have been granted an exemption in the course ELE1801 Electrical Technology are stronglyadvised to purchase the ELE1801 study materials from the USQ Bookshop and work through these prior toattempting ELE2702 or ELE3803.
Pathway
The Pathway to the Bachelor of Engineering (Honours) program is available for this major. Please refer toOther Information - Engineering Pathways at the beginning of this program section.
Major study: Power Engineering (Major Study Code:15935)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
1,2,3111MEC1201 Engineering Materials1,2211ENG11011,2211ENM1600 Engineering Mathematics1211ELE1301 Computer Engineering1,211,21ENG1002 Introduction to Engineering and Built
Environment Applications2,3221ENG21022221ELE1502 Electronic Circuits
Pre-requisite: ENM1500 orENM1600 or Students must
2,3121ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
1,2312ENG1100 Introduction to Engineering DesignPre-requisite: (ENG1500 orMAT1500 or ENM1500 or
1412ELE2702 Electrical Measurement and Analysis#
ENM1600) and ELE1801 orStudents must be enrolled inthe following Program: GCEN
1412Elective (Select from the Electives list)1312ELE2303 Embedded Systems Design
Pre-requisite: (ELE1502 andELE1301) or Students must
2322ELE2501 Electronic Workshop and Production#
be enrolled in the followingProgram: GCENPre-requisite: ELE1801 or Students must be enrolled in
2422ELE2704 Electricity Supply Systems^
one of the following Programs: MEPR or GCEN or METCor GEPRPre-requisite: ELE1502 or Students must be enrolled in
2422ELE2503 Electronic Systems#
the following Program: GCENor GEPRPre-requisite: ENM1500 orENM1600 or Students must
2322ELE2101 Control and Instrumentation#
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081143© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
Major study: Power Engineering (Major Study Code:15935)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
1,3613ENG3003 Engineering Management†
1,2,3523ENG2002 Technology, Sustainability and Society1613Elective (Select from the Electives list)
Pre-requisite: ELE1801 or Students must be enrolled in
1513ELE3803 Electrical Plant
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: ELE1801 or Students must be enrolled in
1613ELE3804 Power Systems Protection
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: (ENG2102 orENG1003 or ENG1101) and
2623ENG3111 Technology Design Project
Undergraduate studentsmusthave completed 14 coursesin their program.
2523Elective (Select from the Electives list)Pre-requisite: (ELE1502 andELE1801) or Students must
2523ELE3805 Power Electronics Principles and Applications
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
Practice Courses
C2,3111ENG1901 Engineering Practice 1^^
C3221ELE1911 Electrical and Electronic Practice APre-requisite: (ELE1301 andELE1502 and ELE1801) or
C3312ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENSPre-requisite: (ELE1301 andELE1502 and ELE1801) or
C2422ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENSPre-requisite: (ELE1801 andELE1301 and ELE1502) or
C2513ELE3914 Electrical and Electronic Practice D
Students must be enrolled inone of the following Programs: MENS or MEPR
1,363ENG3909 Work Experience - Technologist^
Electives (Select from the following)
22ELE2103 Linear Systems and ControlPre-requisite: ELE1502 or Students must be enrolled in
22ELE2504 Electronic Design and Analysis
one of the following Program
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081144© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
Major study: Power Engineering (Major Study Code:15935)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
s: MEPR or GDNS or MENSor GCNS or GCEN or GEPR
2,32,3ENG4004 Engineering Project and Operations
Management‡
11ELE3305 Computer Systems and CommunicationsProtocols
1ELE4109 Measurement Science & Instrument
Engineering>
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,32CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
11CIV2605 Construction EngineeringPre-requisite: CIV1501 orCIV1500 or Students must be
22CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPR
22GIS1401 Geographic Data Presentation1,31GIS1402 Geographic Information Systems22SVY1110 Introduction to Global Positioning System
FootnotesThis is a Pathway to the Bachelor of Engineering course. Please refer to Other Information - Engineering Pathways at the beginning of thisprogram section.
#
On-campus students should enrol in the external offering of this course.^The semester 3 offering of this course is offered in odd numbered years only.†ENG1901 Engineering Practice 1 is the first in a series of Practice Courses designed to enable students to acquire engineering and professionalpractice skills, including practical and teamwork skills, problem solving and engineering judgement. It is designed principally to cater for the
^^
needs of recent school leavers and those lacking any significant experience of the engineering workforce. Students who have a trade certificateand who have been employed in the engineering industry for some time may be able to claim exemption from the course.The semester 3 offering of this course is offered in even numbered years only.‡Offered Odd Years Only>
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081145© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering Technology (BETC) - BEngTech (2022)
Bachelor of Spatial Science Technology (BSST) - BSpScTechQTAC code (Australian and New Zealand applicants): Unspecified (Toowoomba campus: 907801; External:907805); Surveying (Springfield campus: 927801)
CRICOS code (International applicants): 053512D
ExternalOn-campus^
Semester 1 (February)Semester 2 (July)
Semester 1 (February)Semester 2 (July)
Start:
-Springfield, ToowoombaCampus:
Commonwealth supported placeCommonwealth supported placeFees:Domestic full fee paying placeDomestic full fee paying placeInternational full fee paying placeInternational full fee paying place
3 years full-time, 6 years part-timeStandard duration:
From: Associate Degree of Spatial ScienceProgramarticulation: To: Bachelor of Spatial Science (Honours); Master of Spatial Science Technology
FootnotesOnly the Surveying major is available on-campus at Springfield.^
Contact us
Current studentsFuture International studentsFuture Australian and NewZealand students
Ask a questionFreecall (within Australia): 1800007 252Phone (from outside Australia): +617 4631 2285Email [email protected]
Ask a questionPhone: +61 7 4631 5543Email: [email protected]
Ask a questionFreecall (within Australia): 1800269 500Phone (from outside Australia): +617 4631 5315Email: [email protected]
Professional accreditationThe Bachelor of Spatial Science Technology (Surveying) program is accredited by the Surveyors Board ofQueensland and is recognised in every Australian state and in New Zealand through reciprocal arrangements.The degree, together with relevant industry experience, enables registration as a graduate surveyor with theQueensland Surveyors Board. The degree, together with relevant industry experience, enables registrationand/or licensing as a professional mining surveyor with the Surveyors Boards of Queensland and New SouthWales.
The Spatial Science Institute has accredited both program majors and graduates are eligible for membershipwith the Surveying and Spatial Sciences Institute Australia.
Program aimsThe Bachelor of Spatial Science Technology program equips students with a core of basic technical, scientific,analytical, business administration and communication skills that will permit them to undertake further studyof the science and practice of spatial science in one of two fields: Geographic Information Systems (GIS) orSurveying. The program provides students with sufficient knowledge of surveying, spatial information systemsor urban and regional planning to be eligible to gain employment, certification and, where appropriate,registration as a Graduate Surveyor or GIS Spatial Scientist.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081146© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Spatial Science Technology (BSST) - BSpScTech (2022)
In addition, students obtain knowledge of the natural, legal, commercial, industrial and social environmentsin which they will function as professionals. The program instils in students the need for continuing professionaldevelopment and gives them the ability to adapt to change.
Program objectivesA student who successfully completes the Bachelor of Spatial Science Technology should be able to apply:
● broad and coherent knowledge in the theories, concepts, methods and technologies in the areas of surveyingand spatial science
● skills and knowledge of the analysis and evaluation of appropriate technologies, methods and processesto solve and complete a range of surveying and spatial science activities
● well-developed technical and cognitive skills to create innovative and sustainable solutions utilisingcutting-edge technologies, supported by research to collect, store and manipulate spatial data
● knowledge and skills to autonomously apply well-informed judgements regarding specialised practices,theories and processes in their domain of knowledge
● well-developed communication skills to transmit and convey the necessary information and ideas torelevant stakeholders
● consistent application of academic norms and ethical standards in decision making when workingcollaboratively in a professional capacity
● knowledge of surveying or spatial information systems to sufficient depth to be eligible for employment,certification and, where appropriate, registration as a Graduate Surveyor or GIS Spatial Scientist.
Australian Qualifications FrameworkThe Australian Qualifications Framework (AQF) is a single national, comprehensive system of qualificationsoffered by higher education institutions (including universities), vocational education and training institutionsand secondary schools. Each AQF qualification has a set of descriptors which define the type and complexityof knowledge, skills and application of knowledge and skills that a graduate who has been awarded thatqualification has attained, and the typical volume of learning associated with that qualification type.
This program is at AQF Qualification Level 07. Graduates at this level will have broad and coherent knowledgeand skills for professional work and/or further learning.
The full set of levels criteria and qualification type descriptors can be found by visiting www.aqf.edu.au.
Program Information SetView USQ’s admission criteria, student profiles and a summary of all offers made under Course AdmissionInformation Set via the QTAC website.
Admission requirementsTo be eligible for admission, applicants must satisfy the following requirements:
● Have achieved a minimum Australian Tertiary Admission Rank (ATAR) of 65.6, or equivalentqualification.^
● Subject Pre-requisites: English (Units 3 & 4, C) and Mathematical Methods (Units 3 & 4, C) or equivalent.● English Language Proficiency requirements for Category 2.
All students are required to satisfy the applicable English language requirements.
If students do not meet the English language requirements they may apply to study a University-approvedEnglish language program. On successful completion of the English language program, students may beadmitted to an award program.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081147© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Spatial Science Technology (BSST) - BSpScTech (2022)
These are determined by the University for specific programs each Semester. The 2021 ATAR andtertiary entrance ranks are based on agreed QTAC schedules which assess formal study at Year 12 or
^
equivalent level, tertiary, preparatory, professional or vocational qualifications or work experience, asdetailed in the QTAC Assessment of Qualifications Manual and QTAC Assessor Guidelines.
Adjustment factors may help you get into the program of your choice by increasing your entrance rank.The additional points don't apply to all applicants or all programs. Please read the information aboutUSQ's Adjustment Factors carefully to find out what you may be eligible for.
Program fees
Commonwealth supported placeA Commonwealth supported place is where the Australian Government makes a contribution towards the costof a students' higher education and students pay a student contribution amount, which varies depending onthe courses undertaken. Students are able to calculate the fees for a particular course via the Course FeeSchedules.
Commonwealth Supported students may be eligible to defer their fees through a Government loan calledHECS-HELP.
Domestic full fee paying placeDomestic full fee paying places are funded entirely through the full fees paid by the student. Full fees varydepending on the courses that are taken. Students are able to calculate the fees for a particular course via theCourse Fee Schedule
Domestic full fee paying students may be eligible to defer their fees through a Government loan called FEE-HELP provided they meet the residency and citizenship requirements.
Australian citizens, Permanent Humanitarian Visa holders, Permanent Resident visa holders and New Zealandcitizens who will be resident outside Australia for the duration of their program pay full tuition fees and arenot eligible for FEE-Help.
International full fee paying placeInternational students pay full fees. Full fees vary depending on the courses that are taken and whether theyare studied on-campus, via distance education/online. Students are able to calculate the fees for a particularcourse via the Course Fee Schedules.
Program structureThe Bachelor of Spatial Science Technology is a 24-unit program comprising Academic Courses plus PracticeCourses.
Academic courses are one-unit courses and involve approximately 155 hours of student workload per unit.
Practice courses are zero-unit courses and each involves approximately 50 hours of student workload.
Required time limitsStudents have a maximum of 8 years to complete this program.
Electives/Approved coursesApproved courses are part of the Academic program and students should select approved courses from aspecified list of approved courses.
Practical experienceWork experience is desirable and encouraged but is not required for the completion of the Bachelor of SpatialScience Technology program. Students are encouraged to obtain work experience during vacation periods.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081148© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Spatial Science Technology (BSST) - BSpScTech (2022)
IT requirementsAccess to an up-to-date computer is necessary. On-campus students can access appropriately equippedlaboratories, but should consider acquisition of their own computer. External students should be able to accessa computer with the following minimum standards as advised by the University. All students should haveaccess to email and the Internet via a computer running the latest versions of Internet web browsers such asInternet Explorer or Firefox. The University has a wireless network for on-campus students' computers. Inorder to take advantage of this facility and further enhance their on-campus learning environment, studentsshould consider purchasing a notebook/laptop computer with wireless connectivity. Specialist software isrequired for some courses.
Residential schoolsThe attendance requirement of residential schools within this degree is indicated by the following letters: R= Recommended; HR = Highly Recommended; M = Mandatory. To find out more about residential schools,visit the Residential School Schedule to view specific dates for your degree, or visit the Policy and ProcedureLibrary.
Students are required to undertake practical and professional activities relevant to their program throughenrolment in a series of Practice courses in the program. Practice courses are zero unit courses that may beundertaken in either on-campus or external mode and the final grades available are Pass (P)/Fail (F) only.They are a compulsory part of the program and do not attract a student contribution charge for Australianresidents or a tuition fee for international students. The recommended enrolment schedule for Practice coursesis shown in the Recommended Enrolment Pattern for the program in this Handbook.
External students must attend a number of residential schools during their program to obtain experience inpractical and professional activities appropriate to the program. The residential schools are included in Practicecourses which are conducted in Semester 3 or during the recess periods. The dates for each residential schoolPractice course are shown in the Residential School Schedule in this Handbook and external students shouldensure they are able to attend the residential school prior to enrolling in a Practice course. Personal protectiveequipment is compulsory in many engineering, construction and spatial science laboratories, students shouldconfirm the requirements before attending residential schools for Practice courses.
Students who enrol in on-campus mode for Practice courses normally undertake a series of weekly activitiesand/or attend a compulsory residential school.
ArticulationStudents can articulate into the Bachelor of Spatial Science (Honours) program.
Exit pointsStudents who, for whatever reason, are unable to complete the Bachelor of Spatial Science Technology andwho satisfy all of the requirements of either the Associate Degree of Spatial Science or Diploma of EngineeringStudies may be permitted to exit with that award.
CreditExemptions/credit will be assessed based on the USQ Credit and Exemption Procedure.
Work Experience
Work and industrial experience that has not been formally assessed, does not normally qualify for coursecredit in the Bachelor of Spatial Science Technology program.
Geographic Information Systems Major recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081149© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Spatial Science Technology (BSST) - BSpScTech (2022)
To satisfy the requirements of the program students must complete all of the Academic and Practice Coursesin the following table that shows the recommended enrolment patterns for on-campus and external students.Students following a non-standard enrolment pattern should consult the course specification to ascertain if acourse is offered in another term.
Major study: Geographic Information Systems (Major Study Code: 15405)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1, Semester 1
Academic Courses
1,211ENM1600 Engineering Mathematics1,311GIS1402 Geographic Information Systems111SVY1102 Surveying A1,211ENG1003 Problem Solving in Engineering and the Built
Environment
Year 1, Semester 2
221GIS1401 Geographic Data Presentation1,221ENG1002 Introduction to Engineering and Built
Environment Applications221SVY1110 Introduction to Global Positioning System1,2,321CSC1401 Foundation Programming
Practice courses Year 1
M1211SVY1901 Surveying and Spatial Science Practice 1
Year 2, Semester 1
Academic Courses
112ENV2201 Land Studies112URP1001 Introduction to Urban and Regional Planning
Pre-requisite: GIS1402 andCSC1401 or Students must
112GIS3407 GIS Programming and Visualisation#
be enrolled in one of the following Programs: GDST orMSST or GCST or MENS orMSPT
1,2,312ENG2002 Technology, Sustainability and Society
Year 2, Semester 2
222Approved Course (Select from the Approved Course list)222URP2002 Local Government Planning Practice and
Technology#
222SVY3302 Property Valuation and Development222GIS3406 Remote Sensing and Image Processing
Practice Courses Year 2
Pre-requisite: (GIS1401 andGIS1402) or (URP2001) or
M34GPL2901 GIS and Planning Practice 1
(Students must be enrolledin one of the following Programs: GCNS or GDNS orMENS)Pre-requisite: (GIS1402 orURP2001) Pre-requisite orCo-requisite: GPL2901
M35GPL3902 GIS and Planning Practice 2
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081150© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Spatial Science Technology (BSST) - BSpScTech (2022)
Major study: Geographic Information Systems (Major Study Code: 15405)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 3, Semester 1
Academic Courses
113SVY4309 Practice Management for Spatial Scientists#
113SVY3202 Photogrammetry and Remote Sensing113Approved Course (Select from the Approved Course list)
Pre-requisite: CSC1401 orCIS1000 Enrolment is not
1,313CSC3400 Database Systems
permitted in CSC3400 ifCIS2002 has been previouslycompleted.
Year 3, Semester 2
Pre-requisite: GIS1402 andGIS3406 or Students must
223GIS3008 Applications of GIS and Remote Sensing
be enrolled in one of the following Programs: GCST orGDST or MSPT
223GIS3405 Spatial Analysis and ModellingPre-requisite: GIS1402 or Students must be enrolled in
223GIS4407 Web Based Geographic Information System
one of the following Programs: GCST or GDST or MSSTor MSPT or GCNS or GDNSor MENS
223Approved Course (Select from the Approved Course list)
Approved Courses (Select 3 courses from the following)
Pre-requisite: CSC140122CIS2003 Component Based Software Development1,2,31MKT1001 Introduction to Marketing1,2,31MGT1000 Organisational Behaviour
Enrolment is not permitted inREN1201 if REN8101 hasbeen previously completed.
11REN1201 Environmental Studies<
1,2,31,2ACC1101 Accounting for Decision-Making22AGR2301 Agricultural Science
Co-requisite: LAW1101 orLAW1500 or ENG2002 or
11LAW2107 Environmental Law#
REN1201 or (Students enrolled in BEDU (Legal Studies) or BLAW or LLBP orBALW or BBLA or BCLA orBCLW & Co-requisiteLAW1201 or LAW1111) or(Students enrolled in DJUR& Co-requisite LAW5501 orLAW5111)
22REN3302 Sustainable Resource Use*
Pre-requisite: SVY1102 orSVY1500 or Students must
22SVY1104 Survey Computations A
be enrolled in one of the following Programs: GCST orGDST or MSPT
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081151© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Spatial Science Technology (BSST) - BSpScTech (2022)
Major study: Geographic Information Systems (Major Study Code: 15405)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: URP1001 orURP3201 or Students must
11URP4002 Urban and Regional Planning Theory#
be enrolled in one of the following Programs: GDST orMSPT or GCNS or GDNS orMENS or GCBU or MPPM
11URP2001 Planning Structures and Statutory Planning#
22URP3201 Sustainable Urban Design and Development
FootnotesUnavailable in on-campus mode in 2022#Unavailable in on-campus mode at Springfield in 2022<on-campus mode is only available at Toowoomba.*
Surveying Major recommended enrolment pattern (Toowoomba and Springfieldcampus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice Coursesin the following table that shows the recommended enrolment patterns for on-campus and external students.Students following a non-standard enrolment pattern should consult the course specification to ascertain if acourse is offered in another term.
Major study: Surveying (Major Study Code: 15406)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1, Semester 1
Academic Courses
1,211ENM1600 Engineering Mathematics1,311GIS1402 Geographic Information Systems111SVY1102 Surveying A1,211ENG1003 Problem Solving in Engineering and the Built
Environment
Year 1, Semester 2
1,221ENG1002 Introduction to Engineering and BuiltEnvironment Applications
221SVY1110 Introduction to Global Positioning System221GIS1401 Geographic Data Presentation
Pre-requisite: SVY1102 orSVY1500 or Students must
221SVY1104 Survey Computations A
be enrolled in one of the following Programs: GCST orGDST or MSPT
Practice Courses Year 1
M1211SVY1901 Surveying and Spatial Science Practice 1
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081152© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Spatial Science Technology (BSST) - BSpScTech (2022)
Major study: Surveying (Major Study Code: 15406)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 2, Semester 1
Academic Courses
Pre-requisite: SVY1104 or Students must be enrolled in
112SVY2301 Automated Surveying Systems
one of the following Programs: GCST or GDST or MSPTPre-requisite: SVY1110 andSVY1102 or Students must
112SVY2106 Geodetic Surveying A*
be enrolled in one of the following Programs: GCNS orGCST or GDNS or GDST orMSST or MSPT or MENS
112SVY3202 Photogrammetry and Remote SensingPre-requisite: SVY1104 or Students must be enrolled in
112SVY2302 Mine Surveying
one of the following Programs: GCNS or GCST or GDNSor GDST or MSPT
Year 2, Semester 2
222Approved Course (Select from the Approved course list)Pre-requisite: SVY1104222SVY2303 Construction Surveying
1,2,322ENG2002 Technology, Sustainability and Society
Choose one of the following courses:
Pre-requisite: (SVY1102 andSVY1104) or Students must
222SVY3304 Cadastral Surveying (Queensland)^^
be enrolled in one of the following Programs: GCNS orGCST or GDNS or GDST orMSST or MSPT or MENSPre-requisite: (SVY1102 andSVY1104) or Students must
2SVY3306 Cadastral Surveying (New South Wales)^^
be enrolled in one of the following Programs: GCNS orGCST or GDNS or GDST orMSST or MENS
Practice Courses Year 2
Pre-requisite: SVY1901 andSVY1104 and SVY1110 andGIS1401
M3312SVY2902 Surveying and Spatial Science Practice 2
Pre-requisite: SVY1901 andSVY2301 and SVY2106 andSVY3202
M3422SVY2903 Surveying and Spatial Science Practice 3
Year 3, Semester 1
Academic Courses
Pre-requisite: MAT1500 orENG1500 or ENM1500 or
113CIV2701 Road Design and Location
ENM1600 or Students mustbe enrolled in one of the following Programs: GCST orGDST or GCEN or GEPR
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081153© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Spatial Science Technology (BSST) - BSpScTech (2022)
Major study: Surveying (Major Study Code: 15406)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
113Approved Course (Select from the Approved Course list)113ENV2201 Land Studies
Pre-requisite: ENM1600 andSVY2106 or Students must
113SVY2105 Survey Computations B
be enrolled in one of the following Programs: GCNS orGCST or GDNS or GDST orMSST or MSPT or MENS
Year 3, Semester 2
223SVY3302 Property Valuation and DevelopmentPre-requisite: (SVY2106 andSVY2105) or Students must
223SVY3400 Advanced Surveying
be enrolled in one of the following Programs: GCNS orGCST or GDNS or GDST orMSPT or MENS
223URP3201 Sustainable Urban Design and DevelopmentPre-requisite: SVY1110 andSVY2105 or Students must
223SVY3107 Geodetic Surveying B
be enrolled in one of the following Programs: GCNS orGCST or GDNS or GDST orMSST or MSPT
Practice Courses Year 3
Pre-requisite: SVY2902 orSVY2903 and SVY3304 orSVY3306 and SVY3202
M2,36SVY3904 Surveying and Spatial Science Practice 4
Approved Courses (Select 2 courses from the following)
11SVY4309 Practice Management for Spatial Scientists#
1,2,31,2ACC1101 Accounting for Decision-Making11CIV2605 Construction Engineering
Pre-requisite: (SVY1102 andSVY1104) or Students must
22SVY3304 Cadastral Surveying (Queensland)**
be enrolled in one of the following Programs: GCNS orGCST or GDNS or GDST orMSST or MSPT or MENSPre-requisite: (SVY1102 andSVY1104) or Students must
2SVY3306 Cadastral Surveying (New South Wales)**
be enrolled in one of the following Programs: GCNS orGCST or GDNS or GDST orMSST or MENSPre-requisite: GIS1402 andCSC1401 or Students must
11GIS3407 GIS Programming and Visualisation#
be enrolled in one of the following Programs: GDST orMSST or GCST or MENS orMSPTPre-requisite: URP1001 orURP3201 or Students must
11URP4002 Urban and Regional Planning Theory#
be enrolled in one of the following Programs: GDST or
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081154© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Spatial Science Technology (BSST) - BSpScTech (2022)
Major study: Surveying (Major Study Code: 15406)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
MSPT or GCNS or GDNS orMENS or GCBU or MPPM
1,2,32CSC1401 Foundation Programming22SVY4304 Land and Cadastral Law22GIS3405 Spatial Analysis and Modelling22GIS3406 Remote Sensing and Image Processing11URP1001 Introduction to Urban and Regional Planning11URP2001 Planning Structures and Statutory Planning#
22URP2002 Local Government Planning Practice and
Technology#
FootnotesUnavailable in on-campus mode at Toowoomba campus in 2022*students should study the course appropriate to their intended jurisdiction of practice.^^Unavailable in on-campus mode in 2022#The alternative to the previously completed Cadastral core course may be taken as an elective/approved course.**
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081155© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Spatial Science Technology (BSST) - BSpScTech (2022)
Bachelor of Construction (BCON) - BConQTAC code (Australian and New Zealand applicants): Toowoomba campus:
This program is offered only to continuing students. No new admissions will be accepted. Students whoare interested in this study area should consider the Bachelor of Construction (Honours) which will beoffered from S1 2014.
ExternalOn-campus
No new admissionsNo new admissionsStart:
ToowoombaToowoomba, SpringfieldCampus:
Commonwealth supported placeCommonwealth supported placeFees:Domestic full fee paying placeDomestic full fee paying placeInternational full fee paying placeInternational full fee paying place
4 years full-time, 8 years part-time or externalStandard duration:
From: Associate Degree of Construction; Bachelor of Engineering Technology(Infrastructure Management)
Programarticulation:
Contact us
Current students
Ask a questionFreecall (within Australia): 1800 007 252Phone (from outside Australia): +61 7 4631 2285Email [email protected]
Professional accreditationGraduates of the Bachelor of Construction meet the Queensland Building and Construction Commission’stechnical qualification requirements to hold a Builder Open class of licence and a Builder Project ManagementServices licence subject to demonstrating the required level of industry experience.
Professional accreditation will be sought from Australian Institute of Building.
Program aimsThe program aims to produce professional level graduates for the building industry who have a broad rangeof relevant technical skills and well developed skills in communication and team work.
The program is designed to capitalise on growing demand and its primary aims are to:
● enable graduates to attain a diverse range of skills and competence to successfully manage a wide rangeof construction projects
● develop ability to plan, monitor and control the technical, logistical, legal and financial aspects associatedwith building and construction projects
● take a leadership role in planning, managing and organising people and other resources on constructionprojects in the built environment.
Program objectivesAt the completion of the program the graduate will be able to:
● apply building principles and methods● prepare documentation for building development and construction
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081156© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Construction (BCON) - BCon (2022)
● liaise with other members of the building team, clients and other external stakeholders● apply relevant legislation and technical standards in building work● manage the human relations, resources, scheduling, quality control, environmental factors and social
impacts involved in building projects.
Admission requirementsTo be eligible for admission, applicants must satisfy the following requirements:
● have studied four semester units and achieved an exit assessment of 'Sound Achievement' or better ineach of the following Queensland Senior Secondary School subjects: English . It is recommended thatapplicants should also have satisfactorily completed the subject: Mathematics B (Mathematics A isassumed)
or
● be able to demonstrate that they have achieved an equivalent standard in these subjects at another institution
and
● Australian applicants: have achieved a Queensland Overall Position (OP) band, or an equivalent Rankbased on qualifications and previous work experience, at or above the specified cut-off level
All students are required to satisfy the applicable English language requirements.
If students do not meet the English language requirements they may apply to study a University-approvedEnglish language program. On successful completion of the English language program, students may beadmitted to an award program.
Program fees
Commonwealth supported placeA Commonwealth supported place is where the Australian Government makes a contribution towards the costof a students' higher education and students pay a student contribution amount, which varies depending onthe courses undertaken. Students are able to calculate the fees for a particular course via the Course FeeSchedules.
Commonwealth Supported students may be eligible to defer their fees through a Government loan calledHECS-HELP.
Domestic full fee paying placeDomestic full fee paying places are funded entirely through the full fees paid by the student. Full fees varydepending on the courses that are taken. Students are able to calculate the fees for a particular course via theCourse Fee Schedule
Domestic full fee paying students may be eligible to defer their fees through a Government loan called FEE-HELP provided they meet the residency and citizenship requirements.
Australian citizens, Permanent Humanitarian Visa holders, Permanent Resident visa holders and New Zealandcitizens who will be resident outside Australia for the duration of their program pay full tuition fees and arenot eligible for FEE-Help.
International full fee paying placeInternational students pay full fees. Full fees vary depending on the courses that are taken and whether theyare studied on-campus, via distance education/online. Students are able to calculate the fees for a particularcourse via the Course Fee Schedules.
Program structureThe Bachelor of Construction is a 32 unit program consisting of Academic courses and Practice courses.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081157© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Construction (BCON) - BCon (2022)
Academic courses are normally one-unit courses and involve approximately 155 hours of student work perunit.
Practice courses are zero unit courses and each involves approximately 50 hours of student work. The onlygrades available for a Practice Course are Pass (P) and Fail (F). A Practice Course is designed to enablestudents to acquire specific competencies associated with their major study. These competencies range fromspecific practical and communication skills through to generic competencies relating to ethical and socialresponsibility, awareness of the environment, teamwork, etc. For an external student a Practice Course generallyinvolves attendance on-campus for a one-week residential school.
The components of the program are shown in the following table:
Practice CoursesAcademic CoursesProgramComponent UnitsNumber of CoursesUnitsNumber of Courses
061717Core Studies
0up to 11515Major Study
0up to 73232Total
Program completion requirementsThe Bachelor of Construction involves either four years of full-time study or eight years of part-time study.To be eligible for the award students must complete the program within a maximum period of six yearsfull-time study or 10 years part-time study from the date of their initial enrolment. Students who undertakethe program by a combination of external and full-time study must complete their studies within nine yearsfrom the date of their initial enrolment to be eligible for the award.
Required time limitsFull-time students have a maximum of six years to complete this program. Part-time students have a maximumof 10 years to complete this program.A pro-rata adjustment of the maximum time period will apply for those students who transfer from one modeof study to another. A pro-rata reduction in the maximum time period will apply to students who are admittedto a program with advanced standing.
Core coursesThe courses that comprise the core studies program are shown in the following table:
UnitsCoursesAcademic Courses
1ENG1002 Introduction to Engineering and Built Environment Applications
1ENM1500 Introductory Engineering Mathematics
1CMG1001 Introduction to Construction Management and the Built Environment
1MEC1201 Engineering Materials
1ENG1100 Introduction to Engineering Design
1ENG1101
1MGT1000 Organisational Behaviour
1CMG2001 Job Organisation
1ENG2002 Technology, Sustainability and Society
1FIN1101 Introduction to Corporate Finance
1SVY1500 Spatial Science for Engineers
1CIV2502 Structural and Building Technology
1CMG3001 Building and Construction Procurement
1CMG4001This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081
158© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Construction (BCON) - BCon (2022)
1ENG4110 Engineering Research Methodology
1ENG4111 Research Project Part 1
1ENG4112 Research Project Part 2
Practice Courses0ENG1901 Engineering Practice 1
0CIV3906 Civil Materials Practice
0CMG4901 Construction Management Practice
0ENG3902 Professional Practice 1
0ENG4903 Professional Practice 2
0ENG4909 Work Experience - Professional
Major studiesThe Bachelor of Construction consists of a core component and a major study. The major study providesstudents with knowledge and skills in a specific discipline. The major studies currently available are:
● Civil● Management.
Electives/Approved coursesStudents are required to complete a number of electives in their Bachelor of Construction program.In the Bachelor of Construction, students are not required to undertake the Elective courses until the third orfourth level of the program. This enables students enrolled in the second level of the program to discuss theirchoice of Electives with the Faculty of Health, Engineering and Sciences. The most popular choices of coursesfor Electives may thus be timetabled to allow students to attend in their fourth year of study. AppropriateElectives are shown in the tables in the Recommended Enrolment Pattern section. Students may undertakeonly one appropriate level five or level eight course from the Bachelor of Engineering or another Engineeringand Built Environment program as an Elective with the approval of the Faculty of Health, Engineering andSciences. The Faculty may approve a variation in Elective studies where the student can demonstrate thatthere is a sound academic argument for the change. Arguments based on timetable difficulties, quota problemsetc. will not normally be entertained. Note however that students who wish to enrol in courses other than thoselisted must obtain the written approval of the Faculty prior to enrolling in the course if they want the courseto count as credit towards their award.
Students should note that quota restrictions may preclude their enrolment in particular Elective study coursesas students enrolling in these courses as part of their core or major studies will be given enrolment priority.
Practical experienceTo be eligible to graduate from the Bachelor of Construction, students must obtain an aggregate of at least 80days of suitable practical experience during their program. This experience may be in an architectural,engineering or building project management office. Students are required to keep a record of such experience.The student must meet all costs associated with the acquisition of practical experience to satisfy this requirement.The Record Book must be made available for perusal by the Faculty of Health, Engineering and Sciencesupon request. The acceptability or otherwise of employment experience, and the period of that type of experiencethat may be credited towards the 80 days, will be determined by the Faculty.
IT requirementsAccess to an up-to-date computer is necessary. On-campus students can access appropriately equippedlaboratories, but should consider acquisition of their own computer. External students should be able to accessa computer with the following minimum standards as advised by the University. All students should haveaccess to email and the Internet via a computer running the latest versions of Internet web browsers such asInternet Explorer or Firefox. The University has a wireless network for on-campus students' computers. In
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081159© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Construction (BCON) - BCon (2022)
order to take advantage of this facility and further enhance their on-campus learning environment, studentsshould consider purchasing a notebook/laptop computer with wireless connectivity. A notebook/laptop maybe required for some courses.
Residential schoolsThe attendance requirement of residential schools within this degree is indicated by the following letters: R= Recommended; HR = Highly Recommended; M = Mandatory. To find out more about residential schools,visit the Residential School Schedule to view specific dates for your degree, or visit the Policy and ProcedureLibrary.
External students are required to attend a number of residential schools during their program. These areassociated with Practice courses and are normally conducted at the end of Semester 3 (February), or duringthe mid-semester recess in Semester 2 (September/October).
Students enrolled in the external offer of a Practice Course must attend the residential school for that course.In some cases students enrolled in the on-campus mode may also be required to attend the residential school.Students should only enrol in a Practice Course when they are able to attend the residential school for thatcourse. Practice Courses may not be taken earlier than shown except with the permission of the Faculty ofHealth, Engineering and Sciences. In some cases students may enrol in two Practice Courses in one term sothey can complete the two residential schools in a two-week period. The actual dates for each residentialschool are shown in the Residential School schedule in this Handbook.
Practice courses
The majority of the practical and professional experience requirements for the program are contained withinthe major recommended enrolment pattern in the following table. These are zero unit courses, which are acompulsory part of the program, however they do not attract a student contribution charge for AustralianResidents or a tuition fee for international students.
ArticulationStudents who have completed an Associate Diploma or Associate Degree program in Engineering orConstruction at a Queensland university within the last five years are eligible to claim up to a maximum of16 units of advanced standing in the BCON Bachelor of Construction program.
Exit pointsStudents who, for whatever reason, are unable to complete the Bachelor of Construction and who satisfy allof the requirements of either the Bachelor of Engineering Technology, the Associate Degree of Engineeringor the Diploma of Engineering Studies may be permitted to exit with that award.
HonoursThe Bachelor of Construction may be awarded with Honours. The class of honours to be awarded to a studentis dependent upon:
● the Grade Point Average calculated from the grades achieved in the courses studied in, or transferred to,the program
● the grade achieved by the student in the courses ENG4111 Research Project Part 1 and ENG4112 ResearchProject Part 2 (unless the student is exempted from these courses).
The minimum levels of achievement normally required for each class of honours are shown in the followingtable. To be assured of achieving a particular class of honours students must have achieved the specified gradein the research project courses and the minimum GPA requirements for all of the courses studied, for the last16 courses studied, or for the last eight courses studied.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081160© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Construction (BCON) - BCon (2022)
Minimum GradeAchieved in
Research ProjectCourses
GPA Calculated from the Grades Achieved in:Class of HonoursThe Last Eight
Courses
Studied*#
The Last 16Courses
Studied*#
All Courses Studied in theProgram
A6.56.26.0First Class Honours
B5.95.75.5Second Class Honours -Division A
C5.35.15.0Second Class Honours -Division B
81620Minimum number ofcourses required
FootnotesThe results from courses ENG4111 and ENG4112 must be included (unless the student is exempted from these courses).*The best results in a semester are to be used when not all of the results from a semester are required.#
Other informationENG1901 Engineering Practice 1 is the first in a series of Practice courses designed to enable students toacquire engineering and professional practice skills, including practical and teamwork skills, problem solvingand engineering judgement. It is designed principally to cater for the needs of recent school leavers and thoselacking any significant experience of the engineering workforce. Students who have a trade certificate andwho have been employed in the engineering industry for some time may be able to claim exemptionfrom the course.
Civil Major recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
Civil Major recommended enrolment pattern
Major study: Civil (Major Study Code: 16631)Enrolment requirementsYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
111,21ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,2111ENM1500 Introductory Engineering Mathematics1,3311MGT1000 Organisational Behaviour1211ENG11012121CMG1001 Introduction to Construction Management and
the Built Environment<
1,2,3121ENG2002 Technology, Sustainability and Society1221ENG1100 Introduction to Engineering Design2,3221ENG21021,2212ENM1600 Engineering Mathematics
Pre-requisite or Co-requisite: ENM1500 orENG1500 or MAT1500 or ENM1600
1,3312CIV1500 Applied Mechanics
1412CIV2605 Construction Engineering
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081161© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Construction (BCON) - BCon (2022)
Major study: Civil (Major Study Code: 16631)Enrolment requirementsYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
1,3412FIN1101 Introduction to Corporate Finance2322CMG2001 Job Organisation
Pre-requisite: ENM1600 or (ENM1500 andCIV1500) or Students must be enrolled in
2,3322CIV1501 Engineering Statics
one of the following Programs: MEPR or GCEN or GEPRPre-requisite: CIV1501 or CIV1500 or Students must be enrolled in one of the following Programs: MENS or GCEN or GEPR
2422CIV2403 Geology and Geomechanics
2422SVY1500 Spatial Science for Engineers1,2,3513MEC1201 Engineering Materials
Pre-requisite: CIV1501 or Students must beenrolled in one of the following Programs:
1513MEC2402 Stress Analysis
GCEN or METC or MEPR or GCNS orGDNS or MENS or GEPRPre-requisite: CIV1500 or CIV1501 or Students must be enrolled in the following Program: GCEN or GEPR
1613ENV2103 Hydraulics I
1613MGT2001 Risk Mitigation, Work Health and SafetyPre-requisite: CMG1001 and CMG20012523CMG3001 Building and Construction Procurement
2523CIV2502 Structural and Building TechnologyPre-requisite: (ENG1100 and MEC2402) or(ENG1100 and CIV1501 for students en
2623CIV2503 Structural Design I
rolled in one of the following: BETC Infrastructure Management major or BENS Infrastructure Management Engineering major) orStudents must be enrolled in: GCEN orGEPR
2,3723ENG4110 Engineering Research Methodology1,3714ENG3003 Engineering Management†
1714CMG4001 <
Pre-requisite: ENG3902 and ENG4110 andStudents must be enrolled in one of the fol
1814ENG4111 Research Project Part 1
lowing Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI or BEHS orBENG or BENH
1814Elective (Select from the Electives List)*
2724LAW11012,3624Elective (Select from the Electives List)*
Pre-requisite: ENG4111 and Students mustbe enrolled in one of the following Programs:
2824ENG4112 Research Project Part 2
BCNH or BCON or BEBB or BEBC or BEHBor BEHI or BEHS or BENG or BENH
2824Elective (Select from the Electives List)*
Practice Courses
2,3211ENG1901 Engineering Practice 1Pre-requisite or Co-requisite: ENG1901 andCIV2403
3422CIV2901 Geology and Geomechanics Practice
Pre-requisite: MEC1201 and ENG1901 orStudents must be enrolled in one of the following programs: ADCN or BCON or BCNH
3512CIV3906 Civil Materials Practice
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081162© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Construction (BCON) - BCon (2022)
Major study: Civil (Major Study Code: 16631)Enrolment requirementsYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: Students must be enrolled inone of the following Programs: BCNH or B
2723ENG3902 Professional Practice 1
CON or BEBB or BEBC or BEHB or BEHIor BEHS or BENG or BENH or MENSPre-requisite: CMG4001 or CMG40032824CMG4901 Construction Management Practice^
Pre-requisite: ENG3902 and Students mustbe enrolled in one of the following Programs:
2824ENG4903 Professional Practice 2
BCNH or BCON or BEBB or BEBC or BEHBor BEHI or BEHS or BENG or BENH orMENS. Students cannot enrol in ENG3902and ENG4903 in the same semester.
1,384ENG4909 Work Experience - Professional#
Electives (Select from the following)
Pre-requisite: MAT1500 or ENG1500 orENM1500 or ENM1600 or Students must be
11CIV2701 Road Design and Location
enrolled in one of the following Programs:GCST or GDST or GCEN or GEPRPre-requisite: ENV2103 or ENV110122CIV2702 Municipal ServicesPre-requisite: CIV2401 or CIV2403 or Students must be enrolled in one of the follow
22CIV3403 Geotechnical Engineering
ing Programs: GCEN or METC or MEPR orGCNS or GDNS or MENS
2,32,3ENG4004 Engineering Project and Operations
Management‡
11ENG8104 Asset Management in an EngineeringEnvironment
11ENV2201 Land Studies2,32MGT2002 Perspectives of Organisation1MGT2007 Leadership2,32MGT2203 Project Management Fundamentals11MGT3100 ~
11SVY1102 Surveying APre-requisite: SVY1102 or SVY1500 or Students must be enrolled in one of the following Programs: GCST or GDST or MSPT
22SVY1104 Survey Computations A
Pre-requisite: SVY110422SVY2303 Construction Surveying22URP3201 Sustainable Urban Design and Development
Pre-requisite: CIV2503 or Students must beenrolled in one of the following Programs:
11CIV3506 Concrete Structures**
GCEN or METC or MEPR or GCNS orGDNS or MENS
FootnotesAvailable at Springfield campus only in 2017.<The semester 3 offering of this course is offered in odd numbered years only.†Students permitted only one level 8 course as an elective*Residential School will be held at Springfield campus.^On-campus students should enrol in the external mode.#The semester 3 offering of this course is offered in even numbered years only.‡Last offering 2019~Not available on-campus at Springfield in 2017.**
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081163© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Construction (BCON) - BCon (2022)
Management Major recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
Management Major recommended enrolment pattern
Major study: Management (Major Study Code: 16425)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
1111ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,2111ENM1500 Introductory Engineering Mathematics1,3311MGT1000 Organisational Behaviour1211ENG11012121CMG1001 Introduction to Construction Management and
the Built Environment<
1,2,3221ENG2002 Technology, Sustainability and Society2121ENG1100 Introduction to Engineering Design2,3221ENG21021,2212ENM1600 Engineering Mathematics
Pre-requisite or Co-requisite:ENM1500 or ENG1500 orMAT1500 or ENM1600
1,3312CIV1500 Applied Mechanics
1412CIV2605 Construction Engineering1,3412FIN1101 Introduction to Corporate Finance2322CMG2001 Job Organisation
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,3322CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
2,3422LAW11012422SVY1500 Spatial Science for Engineers1,2,3513MEC1201 Engineering Materials1513MGT2007 Leadership1613Elective (Select from the Electives List)*
1613MGT2001 Risk Mitigation, Work Health and SafetyPre-requisite: CMG1001 andCMG2001
2523CMG3001 Building and Construction Procurement
2523CIV2502 Structural and Building Technology2,3623MGT2002 Perspectives of Organisation2723ENG4110 Engineering Research Methodology1,3714ENG3003 Engineering Management†
1714CMG4001 <
Pre-requisite: ENG3902 andENG4110 and Students must
1814ENG4111 Research Project Part 1
be enrolled in one of the fol
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081164© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Construction (BCON) - BCon (2022)
Major study: Management (Major Study Code: 16425)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH
1814Elective (Select from the Electives List)*
2,3624MGT2203 Project Management Fundamentals2,3724ENG4004 Engineering Project and Operations
Management‡
Pre-requisite: ENG4111 andStudents must be enrolled in
2824ENG4112 Research Project Part 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH
2824Elective (Select from the Electives List)*
Practice courses
C2,3211ENG1901 Engineering Practice 1Pre-requisite: Students mustbe enrolled in one of the fol
C2723ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENSPre-requisite: MEC1201 andENG1901 or Students must
C3512CIV3906 Civil Materials Practice
be enrolled in one of the following programs: ADCN orBCON or BCNHPre-requisite: CMG4001 orCMG4003
C2824CMG4901 Construction Management Practice^
Pre-requisite: ENG3902 andStudents must be enrolled in
C2824ENG4903 Professional Practice 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.
1,384ENG4909 Work Experience - Professional#
Electives (Select from the following)
Pre-requisite: (ENG1100 andMEC2402) or (ENG1100 and
22CIV2503 Structural Design I
CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in: GCEN or GEPRPre-requisite: MAT1500 orENG1500 or ENM1500 or
11CIV2701 Road Design and Location
ENM1600 or Students must
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081165© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Construction (BCON) - BCon (2022)
Major study: Management (Major Study Code: 16425)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
be enrolled in one of the following Programs: GCST orGDST or GCEN or GEPRPre-requisite: ENV2103 orENV1101
22CIV2702 Municipal Services
Pre-requisite: CIV1501 orCIV1500 or Students must be
22CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPRPre-requisite: CIV2401 orCIV2403 or Students must be
2CIV3403 Geotechnical Engineering
enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: CIV2503 or Students must be enrolled in
11CIV3506 Concrete Structures**
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
11ENG8104 Asset Management in an EngineeringEnvironment
11ENV2201 Land StudiesPre-requisite: CIV1500 orCIV1501 or Students must be
11ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPRPre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR
11SVY1102 Surveying A22URP3201 Sustainable Urban Design and Development11MGT3100 ~
FootnotesAvailable at Springfield campus only in 2017.<Students permitted only one level 8 course as an elective*The semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡Residential School will be held at Springfield campus.^On-campus students should enrol in the external mode.#Not available on-campus at Springfield in 2017.**Last offering 2019~
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081166© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Construction (BCON) - BCon (2022)
Bachelor of Engineering (BENG) - BEngQTAC code (Australian and New Zealand applicants): Toowoomba campus: 907332; External: 907335Springfield campus: 927332
This program is only offered to continuing students. No new admissions will be accepted. Students whoare interested in this study area should consider the Bachelor of Engineering (Honours) which will beoffered from S1 2014.
ExternalOn-campus
No new admissionsNo new admissionsStart:
Springfield, ToowoombaCampus:
Commonwealth supported placeCommonwealth supported placeFees:Domestic full fee paying placeDomestic full fee paying placeInternational full fee paying placeInternational full fee paying place
4 years full-time, 8 years part-time or externalStandard duration:
From: Associate Degree of Engineering; Bachelor of Engineering TechnologyProgramarticulation:
Notes:
Please note that the Civil Engineering major is the only major that is available on-campus at Springfield.
Contact us
Current students
Ask a questionFreecall (within Australia): 1800 007 252Phone (from outside Australia): +61 7 4631 2285Email [email protected]
Professional accreditationA graduate of this program is eligible to apply for membership of Engineers Australia as a graduate ProfessionalEngineer. After further professional development, a graduate member with a Bachelor of Engineering mayapply for chartered status as a Professional Engineer and, when granted, may use the post-nominal MIEAustCPEng.
The Bachelor of Engineering program is accredited by Engineers Australia and, through an agreement reachedbetween the professional engineering bodies of other countries (the Washington Accord), is also recognisedin the United Kingdom, the United States of America, Canada, Ireland, Hong Kong, New Zealand and SouthAfrica.
Program aimsThe Bachelor of Engineering provides students with the knowledge and skills that are necessary to commencepractice as a professional engineer and to undertake further advanced level studies in engineering. Specificallythe program provides students with a core of basic generic and technical skills, common to all branches ofengineering, and then permits students to undertake an in depth study of either agricultural, civil, computersystems, electrical and electronic, environmental, instrumentation and control, mechanical, mechatronic,power engineering. In addition, students are equipped with a knowledge of the industrial and social environmentsin which they will function as professional engineers. The program also seeks to instill in students a capacityto communicate effectively and adapt to change.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081167© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
The Bachelor of Engineering is primarily vocationally oriented. However, the program has been designed toidentify students who have the capacity to undertake further study at an advanced level and to make an originalcontribution to engineering knowledge. These students are encouraged to undertake the course ENG8001Engineering Research Methods as one of their Elective courses. This, and the two Research Project courses,will assist them in achieving these goals.
Program objectivesThe objectives of this program are:
● to enable students to acquire, and demonstrate that they possess, the specified graduate attributes andcapabilities
● to enable students to acquire in-depth technical competence in one of the following fields: AgriculturalEngineering; Civil Engineering; Computer Systems Engineering; Electrical and Electronic Engineering;Environmental Engineering; Instrumentation and Control Engineering; Mechanical Engineering;Mechatronic Engineering; or Power Engineering.
● to enable students from diverse and non-traditional backgrounds and locations to enrol in the programand to provide them with opportunities to acquire the skills necessary to complete the program in thenormal time
● to enable students to be empowered as learners through the provision of a wide range of teaching andlearning styles and modes in their program
● to ensure that all students, regardless of the mode of study, have equality of opportunity in acquiring thespecified graduate attributes and capabilities
● to ensure that graduates are eligible for graduate membership of Engineers Australia, and other appropriateprofessional bodies.
Admission requirementsTo be eligible for admission, applicants must satisfy the following requirements:
● have studied four semester units and achieved an exit assessment of 'Sound Achievement' or better ineach of the following Queensland Senior Secondary School subjects: English and Mathematics B. It isrecommended that applicants should also have satisfactorily completed the subject: Physics
or
● be able to demonstrate that they have achieved an equivalent standard in these subjects at another institution
and
● Australian applicants: have achieved a Queensland Overall Position (OP) band, or an equivalent Rankbased on qualifications and previous work experience, at or above the specified cut-off level
All students are required to satisfy the applicable English language requirements.
If students do not meet the English language requirements they may apply to study a University-approvedEnglish language program. On successful completion of the English language program, students may beadmitted to an award program.
Program fees
Commonwealth supported placeA Commonwealth supported place is where the Australian Government makes a contribution towards the costof a students' higher education and students pay a student contribution amount, which varies depending onthe courses undertaken. Students are able to calculate the fees for a particular course via the Course FeeSchedules.
Commonwealth Supported students may be eligible to defer their fees through a Government loan calledHECS-HELP.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081168© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Domestic full fee paying placeDomestic full fee paying places are funded entirely through the full fees paid by the student. Full fees varydepending on the courses that are taken. Students are able to calculate the fees for a particular course via theCourse Fee Schedule
Domestic full fee paying students may be eligible to defer their fees through a Government loan called FEE-HELP provided they meet the residency and citizenship requirements.
Australian citizens, Permanent Humanitarian Visa holders, Permanent Resident visa holders and New Zealandcitizens who will be resident outside Australia for the duration of their program pay full tuition fees and arenot eligible for FEE-Help.
International full fee paying placeInternational students pay full fees. Full fees vary depending on the courses that are taken and whether theyare studied on-campus, via distance education/online. Students are able to calculate the fees for a particularcourse via the Course Fee Schedules.
Program structureThe Bachelor of Engineering is a 32 unit program consisting of Academic courses and Practice courses.
Academic courses are normally one-unit courses and involve approximately 155 hours of student work perunit.
Practice courses are zero unit courses and each involves approximately 50 hours of student work. The onlygrades available for a Practice Course are Pass (P) and Fail (F). A Practice Course is designed to enablestudents to acquire specific competencies associated with their major study. These competencies range fromspecific practical and communication skills through to generic competencies relating to ethical and socialresponsibility, awareness of the environment, teamwork, etc. For an external student a Practice Course generallyinvolves attendance on-campus for a one-week residential school.
The components of the program are shown in the following table:
Practice CoursesAcademic CoursesProgramComponent UnitsNumber of CoursesUnitsNumber of Courses
031212Core Studies
03-5 depending uponthe major
2020Major Study
03-83232Total
Program completion requirementsThe Bachelor of Engineering involves either four years of full-time study or eight years of part-time study.To be eligible for the award students must complete the program within a maximum period of six yearsfull-time study or 10 years part-time study from the date of their initial enrolment. Some courses in theAgricultural Engineering major are not yet available in external mode. In that case, students may need tospend up to two terms full-time on-campus to complete those courses. The Instrumentation and ControlEngineering major is designed for process technologists in industry who wish to upgrade their qualifications.As such, the program will normally be undertaken by external study. Students who undertake the program bya combination of external and full-time study must complete their studies within nine years from the date oftheir initial enrolment to be eligible for the award.
These modes are available in each major shown in the following table.
ExternalOn-CampusMajorYesYesAgricultural Engineering
YesYesCivil Engineering
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081169© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
YesYesComputer Systems Engineering
YesYesElectrical and Electronic Engineering
YesYesEnvironmental Engineering
YesInstrumentation and Control Engineering
YesYesMechanical Engineering
YesYesMechatronic Engineering
YesYesPower Engineering
Required time limitsFull-time students have a maximum of six years to complete this program. Part-time students have a maximumof 10 years to complete this program.A pro-rata adjustment of the maximum time period will apply for those students who transfer from one modeof study to another. A pro-rata reduction in the maximum time period will apply to students who are admittedto a program with advanced standing.
Core coursesThe courses that comprise the core studies program are shown in the following table:
UnitsCoursesAcademic Courses
1ENG1002 Introduction to Engineering and Built Environment Applications
1ENG1101
1ENG1100 Introduction to Engineering Design
1ENG2002 Technology, Sustainability and Society
1ENG2102
1ENG3104 Engineering Simulations and Computations
1ENG4110 Engineering Research Methodology
1ENG3003 Engineering Management
1ENG4111 Research Project Part 1
1ENG4112 Research Project Part 2
1ENM1600 Engineering Mathematics
1ENM2600 Advanced Engineering Mathematics
1Elective (Select from the Electives list)
Practice Courses0ENG1901 Engineering Practice 1
0ENG3902 Professional Practice 1
0ENG4903 Professional Practice 2
0ENG4909 Work Experience - Professional
Major studiesThe Bachelor of Engineering consists of a core component and a series of major studies. All students mustcomplete the core courses and one of the major studies. The major study provides students with knowledgeand skills in a specific discipline. The major study areas in the USQ Bachelor of Engineering are:
● Agricultural Engineering● Civil Engineering● Computer Systems Engineering● Electrical and Electronic Engineering
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081170© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
● Environmental Engineering● Instrumentation and Control Engineering● Mechanical Engineering● Mechatronic Engineering● Power Engineering
Electives/Approved coursesIn the Bachelor of Engineering, students are not required to undertake the Elective courses until the third andfourth levels of the program. This enables students enrolled in the second level of the program to discuss theirchoice of Electives with their Faculty. The most popular choices of courses for Electives may thus be timetabledto allow students to attend in their third and fourth years of study. Appropriate Electives are shown in thetables in the Recommended Enrolment Pattern section. Students may undertake only one appropriate levelfive or level eight course from the Bachelor of Engineering or another Engineering and Built Environmentprogram as an Elective with the approval of the Faculty of Health, Engineering and Sciences. The Facultymay approve a variation in Elective studies where the student can demonstrate that there is a sound academicargument for the change. Arguments based on timetable difficulties, quota problems etc. will not normallybe entertained. Note however that students who wish to enrol in courses other than those listed must obtainthe written approval from the Faculty of Health, Engineering and Sciences prior to enrolling in the course ifthey want the course to count as credit towards their award.
Students should note that quota restrictions may preclude their enrolment in particular Elective study coursesas students enrolling in these courses as part of their core or major studies will be given enrolment priority.
Practical experienceTo be eligible to graduate from the Bachelor of Engineering, students must obtain an aggregate of at least 60days of suitable practical experience during their program. This experience may be in an engineering officeor laboratory where the student would be working principally with professional engineers and engineeringassociates. It may, however, be preferable for students to spend some time in field or factory activities to gaininsight into industrial practice and to see what is involved in converting designs into finished products. Studentsare required to enrol in ENG4909 Work Experience - Professional in the latter part of their program and keepa record of appropriate experience as specified in the Course Specification. The work experience is to beendorsed by an appropriate person in the organisation providing the experience and submitted to the examiner.The student must meet all costs associated with the acquisition of practical experience to satisfy this requirement.The record of work experience must be made available for perusal by the Faculty of Health, Engineering andSciences upon request. The acceptability or otherwise of employment experience, and the period of that typeof experience that may be credited towards the 60 days, will be determined by the Examiner of ENG4909Work Experience - Professional.
IT requirementsAccess to an up-to-date computer is necessary. On-campus students can access appropriately equippedlaboratories, but should consider acquisition of their own computer. External students should be able to accessa computer with the following minimum standards as advised by the University. All students should haveaccess to email and the Internet via a computer running the latest versions of Internet web browsers such asInternet Explorer or Firefox. The University has a wireless network for on-campus students' computers. Inorder to take advantage of this facility and further enhance their on-campus learning environment, studentsshould consider purchasing a notebook/laptop computer with wireless connectivity. A notebook/laptop maybe required for some courses.
Residential schoolsThe attendance requirement of residential schools within this degree is indicated by the following letters: R= Recommended; HR = Highly Recommended; M = Mandatory. To find out more about residential schools,visit the Residential School Schedule to view specific dates for your degree, or visit the Policy and ProcedureLibrary.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081171© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Students enrolled in the external offer of a Practice Course must attend the residential school for that course.In some cases students enrolled in the on-campus mode may also be required to attend the residential school.Students should only enrol in a Practice Course when they are able to attend the residential school for thatcourse. Practice courses may not be taken earlier than shown except with the permission of the Faculty ofHealth, Engineering and Sciences. In some cases students may enrol in two Practice courses in one term sothey can complete the two residential schools in a two-week period. The actual dates for each residentialschool are shown in the Residential School schedule in this Handbook.
Safety boots are compulsory in engineering laboratories for several of the Practice courses and are stronglyrecommended for all other Practice courses.
Practice courses
The majority of the practical and professional experience requirements for the program are contained withinthe major recommended enrolment pattern in the following table. These are zero unit courses, which are acompulsory part of the program, however they do not attract a student contribution charge for AustralianResidents or a tuition fee for international students.ENG3902 Professional Practice 1 is to be studied in the student's penultimate year. Upon completion ofENG3902 Professional Practice 1, students must study ENG4111 Research Project Part 1 and ENG4112Research Project Part 2 and ENG4903 Professional Practice 2 in the same academic year.
Elective courses
Elective courses are included in the list of Academic courses. Students should select these courses from theElectives listing.
Related programsStudents may combine the Bachelor of Engineering with a program from another area of study. Currently thefollowing combined programs have been accredited by the University and Engineers Australia:
● Bachelor of Engineering Bachelor of Business●
● .
Exit pointsStudents who, for whatever reason, are unable to complete the Bachelor of Engineering and who satisfy allof the requirements of either the Bachelor of Engineering Technology, the Associate Degree of Engineeringor the Diploma of Engineering Studies may be permitted to exit with that award.
HonoursThe Bachelor of Engineering may be awarded with Honours. The class of honours to be awarded to a studentis dependant upon:
● the Grade Point Average calculated from the grades achieved in the courses studied in, or transferred to,the program;
● the grade achieved by the student in the courses ENG4111 Research Project Part 1 and ENG4112 ResearchProject Part 2 (unless the student is exempted from these courses).
The minimum levels of achievement normally required for each class of honours are shown in the followingtable. To be assured of achieving a particular class of honours students must have achieved the specified gradein the research project courses and the minimum GPA requirements for all of the courses studied, for the last16 courses studied, or for the last eight courses studied.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081172© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Minimum GradeAchieved in
Research ProjectCourses
GPA Calculated from the Grades Achieved in:Class of HonoursThe Last Eight
Courses
Studied*#
The Last 16Courses
Studied*#
All Courses Studied in theProgram
A6.56.26.0First Class Honours
B5.95.75.5Second Class Honours -Division A
C5.35.15.0Second Class Honours -Division B
81620Minimum number ofcourses required
FootnotesThe results from courses ENG4111 and ENG4112 must be included (unless the student is exempted from these courses).*The best results in a semester are to be used when not all of the results from a semester are required.#
Other informationENG1901 Engineering Practice 1 is the first in a series of Practice courses designed to enable students toacquire engineering and professional practice skills, including practical and teamwork skills, problem solvingand engineering judgement. It is designed principally to cater for the needs of recent school leavers and thoselacking any significant experience of the engineering workforce. Students who have a trade certificate andwho have been employed in the engineering industry for some time may be able to claim exemptionfrom the course.
Agricultural Engineering Major recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
The course AGR2902 Field Practice may involve overnight field trips for which each student will be responsiblefor their own accommodation costs. This course is not offered in the on-campus mode. On-campus studentsshould enrol in the external mode.
Major study: Agricultural Engineering (Major Study Code: 12013)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
1,211,21ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,2111ENM1600 Engineering Mathematics1,2121ENG1100 Introduction to Engineering Design1,2211ENG1101
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,3121CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
1,2,3211MEC1201 Engineering Materials2,3221ENG2102
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081173© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Agricultural Engineering (Major Study Code: 12013)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
2221SVY1500 Spatial Science for Engineers1312AGR2302 Agricultural Machinery
Pre-requisite: ENM1600 orStudents must be enrolled in
1312ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCNPre-requisite: CIV1500 orCIV1501 or Students must be
1412ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPRPre-requisite: CIV1501 or Students must be enrolled in
1412MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR
1,2,3322ENG2002 Technology, Sustainability and SocietyPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
2322ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENS
2422Elective (Select from the Electives list)Pre-requisite: CIV1501 orCIV1500 or Students must be
2422CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPR
1513AGR3303 Agricultural Materials and Post-HarvestTechnologies
1513AGR3304 Soil SciencePre-requisite: ENV1101 orENV2103 or Students must
1613ENV3104 Hydraulics II
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
1613AGR3305 Precision and Smart Technologies in Agriculture2523AGR2301 Agricultural Science2723ENG4110 Engineering Research Methodology
Pre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
2523MEC2401 Dynamics I
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENS or GEPR
2623ENV3105 HydrologyPre-requisite: AGR3304 orStudents must be enrolled in
2724ENV4106 Irrigation Science
one of the following Programs: GCEN or GCSC or GDSIor METC or MEPR or GCNSor GDNS orMENS orMSCN.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081174© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Agricultural Engineering (Major Study Code: 12013)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
1,3714ENG3003 Engineering Management†
1714AGR4305 Agricultural Soil MechanicsPre-requisite: ENG3902 andENG4110 and Students must
1814ENG4111 Research Project Part 1
be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH
1814Elective (Select from the Electives list)2624ELE2103 Linear Systems and Control
Pre-requisite: ENG4111 andStudents must be enrolled in
2824ENG4112 Research Project Part 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH
2824Elective (Select from the Electives list)
Practice Courses
C2,311,21ENG1901 Engineering Practice 1Pre-requisite or Co-requisite:ENG1901 and CIV2403
C2,3422CIV2901 Geology and Geomechanics Practice
Pre-requisite or Co-requisite:ENV2103 or ENV1101
C2,3422ENV2902 Hydraulics Practice
C332AGR2902 Field PracticeC263AGR3903 Soil and Water Engineering Practice 2^
C36AGR3905 Agricultural Engineering PracticePre-requisite: Students mustbe enrolled in one of the fol
C2723ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENSPre-requisite: ENG3902 andStudents must be enrolled in
C2814ENG4903 Professional Practice 2*
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.
1,384ENG4909 Work Experience - Professional^
Electives (Select from the following)
Pre-requisite: CIV2401 orCIV2403 or Students must be
22CIV3403 Geotechnical Engineering
enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
11ELE1301 Computer Engineering
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081175© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Agricultural Engineering (Major Study Code: 12013)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
2,32,3ENG4004 Engineering Project and Operations
Management‡
Pre-requisite: MEC2401 orELE2103 or Students must
22MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCEN
11ENV2201 Land StudiesPre-requisite: (ENV3104 andENV3105) or Students must
22ENV4107 Water Resources Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENV1101 orENV2103 or Students must
22ENV4203 Public Health Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS
1,31GIS1402 Geographic Information SystemsPre-requisite: MEC1201 orStudents must be enrolled in
11MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCENPre-requisite: (MEC2402 andENG1100) or Students must
22MEC2301 Design of Machine Elements
be enrolled in one of the following Programs: MEPR orGCEN or GEPRPre-requisite: MEC1201 orStudents must be enrolled in
11MEC3203 Materials Technology
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENSPre-requisite: (MEC2304 andMEC2401 and MEC2402) or
11MEC3302 Computational Mechanics in Design
Students must be enrolled inone of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: MEC2301 orStudents must be enrolled in
22MEC3303 Mechanical and Mechatronic System Design
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENSEnrolment is not permitted inREN1201 if REN8101 hasbeen previously completed.
11REN1201 Environmental Studies
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081176© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†On-campus students should enrol in the external mode.^Students need to enrol in ENG4909 Work Experience - Professional to record their relevant work experience.*The semester 3 offering of this course is offered in even numbered years only.‡
Civil Engineering Major recommended enrolment pattern (Toowoomba and SpringfieldCampus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
Elective courses are included in the list of Academic courses. Students should select these courses from theElectives listing.
Major study: Civil Engineering (Major Study Code: 12014)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
1,211,21ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,2111ENM1600 Engineering Mathematics1,2121ENG1100 Introduction to Engineering Design1,2211ENG1101
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,3121CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
1,2,3211MEC1201 Engineering Materials2,3221ENG21022221SVY1500 Spatial Science for Engineers
Pre-requisite: ENM1600 orStudents must be enrolled in
1312ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCNPre-requisite: CIV1500 orCIV1501 or Students must be
1312ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPRPre-requisite: CIV1501 or Students must be enrolled in
1412MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR
1,2,3412ENG2002 Technology, Sustainability and SocietyPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
2322ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENS
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081177© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Civil Engineering (Major Study Code: 12014)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
2322Elective (Select from the Electives list)Pre-requisite: CIV1501 orCIV1500 or Students must be
2422CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPRPre-requisite: (ENG1100 andMEC2402) or (ENG1100 and
2422CIV2503 Structural Design I
CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in: GCEN or GEPRPre-requisite: ENV1101 orENV2103 or Students must
1513ENV3104 Hydraulics II
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: MEC2402 and(MAT1502 or ENM1600 or
1513CIV3505 Structural Analysis
MAT1102) or Students mustbe enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS or GEPRPre-requisite: CIV2503 or Students must be enrolled in
1613CIV3506 Concrete Structures#
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
1613CIV2605 Construction Engineering2723ENG4110 Engineering Research Methodology
Pre-requisite: CIV2401 orCIV2403 or Students must be
2523CIV3403 Geotechnical Engineering
enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
2623ENV3105 Hydrology2623CIV3703 Transport Engineering
Pre-requisite: CIV3505 andCIV3506 or Students must be
1714CIV4508 Structural Design II
enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
1,3714ENG3003 Engineering Management†
Pre-requisite: ENG3902 andENG4110 and Students must
1814ENG4111 Research Project Part 1
be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC or
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081178© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Civil Engineering (Major Study Code: 12014)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
BEHB or BEHI or BEHS orBENG or BENH
1814Elective (Select from the Electives list)2524Elective (Select from the Electives list)
Pre-requisite: ENV1101 orENV2103 or Students must
2724ENV4203 Public Health Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENG4111 andStudents must be enrolled in
2824ENG4112 Research Project Part 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH
2824Elective (Select from the Electives list)
Practice Courses
C2,311,21ENG1901 Engineering Practice 1Pre-requisite or Co-requisite:ENG1901 and CIV2403
C2,3422CIV2901 Geology and Geomechanics Practice
Pre-requisite or Co-requisite:ENV2103 or ENV1101
C2,3322ENV2902 Hydraulics Practice
Pre-requisite: MEC1201 andENG1901 or Students must
C3513CIV3906 Civil Materials Practice
be enrolled in one of the following programs: ADCN orBCON or BCNHPre-requisite: CIV2503 or Students must be enrolled in
C36CIV3907 Civil Systems Practice^
one of the following Programs: MENS or MEPRCo-requisite: CIV4508 or Students must be enrolled in the
C28CIV4908 Civil Design Practice^
following Program: MEPR orMENSPre-requisite: Students mustbe enrolled in one of the fol
C2723ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENSPre-requisite: ENG3902 andStudents must be enrolled in
C2814ENG4903 Professional Practice 2*
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.
1,384ENG4909 Work Experience - Professional^
Electives (Select from the following)
11AGR3304 Soil Science
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081179© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Civil Engineering (Major Study Code: 12014)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
2CIV3603 Construction Methods2,32,3ENG4004 Engineering Project and Operations
Management‡
11ENV2201 Land StudiesPre-requisite: (ENV3104 andENV3105) or Students must
22ENV4107 Water Resources Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS
1,31GIS1402 Geographic Information SystemsEnrolment is not permitted inREN1201 if REN8101 hasbeen previously completed.
11REN1201 Environmental Studies
Pre-requisite: SVY1102 orSVY1500 or Students must
22SVY1104 Survey Computations A
be enrolled in one of the following Programs: GCST orGDST or MSPT
22URP3201 Sustainable Urban Design and Development
Either
2CIV8802 Advanced Prestressed Concrete >
or
Pre-requisite: CIV3506 orMEC3203 or Students must
1CIV8803 Advanced Mechanics and Technology of FibreComposites
be enrolled in one of the following Programs: GCEN orPGCN or METC or MEPR orGCNS or GDNS or MENS orMENC or MAEN
FootnotesNot available on-campus at Springfield in 2017.#The semester 3 offering of this course is offered in odd numbered years only.†On-campus students should enrol in the external mode.^Students need to enrol in ENG4909 Work Experience - Professional to record their relevant work experience.*The semester 3 offering of this course is offered in even numbered years only.‡Offered Odd Years Only>
Computer Systems Engineering Major recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081180© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
All students granted exemption from ELE1801 are strongly advised to purchase the ELE1801 study guidefrom the USQ Bookshop and work through this prior to attempting courses for which ELE1801 is an enrolmentrequirement.
Major study: Computer Systems Engineering (Major Study Code: 12017)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
1,2111CSC1401 Foundation Programming1,2111ENM1600 Engineering Mathematics1,211,21ENG1002 Introduction to Engineering and Built
Environment ApplicationsPre-requisite: ENM1500 orENM1600 or Students must
2,3121ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
1,2211ENG11011211ELE1301 Computer Engineering2,3221ENG21022221ELE1502 Electronic Circuits
Pre-requisite: ENM1600 orStudents must be enrolled in
1312ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCN
1312ELE2303 Embedded Systems DesignPre-requisite: CSC1401 orStudents must be enrolled in
1312CSC2402 Object-Oriented Programming in C++
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTN
2322ELE2103 Linear Systems and Control1,2422ENG1100 Introduction to Engineering Design1412MAT1101 Discrete Mathematics for Computing
Pre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
2422ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENS
2422Elective (Select from the Electives list)1,2,3513ENG2002 Technology, Sustainability and Society
Pre-requisite: (ELE1502 andELE1801) or Students must
1513ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETC or GEPRPre-requisite: ELE1502 or Students must be enrolled in
2523ELE2504 Electronic Design and Analysis
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN or GEPRPre-requisite: ELE1301 or Students must be enrolled in
2523ELE3307 Real Time Systems
one of the following Program
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081181© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Computer Systems Engineering (Major Study Code: 12017)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
s: GCEN or GCNS or METCor MENS or MEPRPre-requisite: ELE2103 or Students must be enrolled in
1613ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCor GEPR
1613ELE3305 Computer Systems and CommunicationsProtocols
2723ENG4110 Engineering Research Methodology2623ELE3107 Signal Processing
Pre-requisite: CSC2402 orStudents must be enrolled in
2724CSC2401 Algorithms and Data Structures
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT
1714Elective (Select from the Electives list)2624Elective (Select from the Electives list)
Pre-requisite: CSC14011,271,24CSC2408 Software Development Tools1,3814ENG3003 Engineering Management†
Pre-requisite: ENG3902 andENG4110 and Students must
1814ENG4111 Research Project Part 1
be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENHPre-requisite: ENG4111 andStudents must be enrolled in
2824ENG4112 Research Project Part 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH
2,3824ENG4004 Engineering Project and Operations
Management‡
Practice Courses
C2,311,21ENG1901 Engineering Practice 1C3221ELE1911 Electrical and Electronic Practice A
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
C3312ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENSPre-requisite: (ELE1301 andELE1502 and ELE1801) or
C2422ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENSPre-requisite: (ELE1801 andELE1301 and ELE1502) or
C2513ELE3914 Electrical and Electronic Practice D
Students must be enrolled in
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081182© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Computer Systems Engineering (Major Study Code: 12017)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
one of the following Programs: MENS or MEPRPre-requisite: ELE1801 andELE1301 and ELE1502 or S
C2623ELE3915 Electrical and Electronic Practice E
tudents must be enrolled inone of the following Programs: MENS or MEPRPre-requisite: Students mustbe enrolled in one of the fol
C2723ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENSPre-requisite: ENG3902 andStudents must be enrolled in
C2814ENG4903 Professional Practice 2*
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.
1,384ENG4909 Work Experience - Professional^
Electives (Select from the following)
Pre-req: CSC2408; and Pre-req or Co-req: CSC2402; or
11CSC3403 Comparative Programming Languages
Students must be enrolled inone of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT Enrolmentis not permitted in CSC3403if CIS3001 has been previously completedPre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
22ELE3506 Electronic Measurement
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENS
2ELE4402Pre-requisite: ELE1301 or Students must be enrolled in
11ELE4607 Advanced Digital Communications
one of the following Programs: GCEN or METC or GCNSor GDNS or MENS or MEPRPre-requisite: MEC2401 orELE2103 or Students must
22MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCEN
FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡Students need to enrol in ENG4909 Work Experience - Professional to record their relevant work experience.*
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081183© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
On-campus students should enrol in the external mode.^
Electrical and Electronic Engineering Major recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
Students who have been granted an exemption from ELE1801 Electrical Technology are strongly advised topurchase the ELE1801 study guide from the USQ Bookshop and work through this prior to attempting coursesfor which ELE1801 is an enrolment requirement.
Major study: Electrical and Electronic Engineering (Major Study Code: 12018)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
1,2,3111MEC1201 Engineering Materials1,2111ENM1600 Engineering Mathematics1,211,21ENG1002 Introduction to Engineering and Built
Environment ApplicationsPre-requisite: ENM1500 orENM1600 or Students must
2,3121ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
1,2211ENG11011211ELE1301 Computer Engineering2,3221ENG21022221ELE1502 Electronic Circuits
Pre-requisite: ENM1600 orStudents must be enrolled in
1312ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCN
1312ELE2303 Embedded Systems Design2322Elective (Select from the Electives list)2322ELE2103 Linear Systems and Control1,2412ENG1100 Introduction to Engineering Design
Pre-requisite: (ELE1502 andELE1801) or Students must
1412ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETC or GEPRPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
2422ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENSPre-requisite: ELE1502 or Students must be enrolled in
2422ELE2504 Electronic Design and Analysis
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN or GEPR
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081184© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 12018)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
1,2,3513ENG2002 Technology, Sustainability and SocietyPre-requisite: ELE1801 or Students must be enrolled in
1513ELE3803 Electrical Plant
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
2523ELE3506 Electronic Measurement
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENSPre-requisite: (ELE1502 andELE1801) or Students must
2523ELE3805 Power Electronics Principles and Applications
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
1613ELE3305 Computer Systems and CommunicationsProtocols
Pre-requisite: ELE2103 or Students must be enrolled in
1613ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCor GEPR
2623ENG4110 Engineering Research Methodology2623ELE3107 Signal Processing
Pre-requisite: {(MAT1502 orENM1600) and ELE2103 and
1714ELE4605 Fields and Waves
ELE2601} or Students mustbe enrolled in one of the following Programs: MEPR orMENS or GCNS or GDNS
1714Elective (Select from the Electives list)Pre-requisite: (ELE2504 andELE2601) or Students must
2724ELE4606 Communication Systems
be enrolled in one of the following Programs: GCEN orMETC or MEPR or MENS orGCNS or GDNS
2724Elective (Select from the Electives list)1,3814ENG3003 Engineering Management†
Pre-requisite: ENG3902 andENG4110 and Students must
1814ENG4111 Research Project Part 1
be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENHPre-requisite: ENG4111 andStudents must be enrolled in
2824ENG4112 Research Project Part 2
one of the following Programs: BCNH or BCON or BEBB
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081185© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 12018)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
or BEBC or BEHB or BEHI orBEHS or BENG or BENH
2,3824ENG4004 Engineering Project and Operations
Management‡
Practice Courses
C2,311,21ENG1901 Engineering Practice 1C3221ELE1911 Electrical and Electronic Practice A
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
C3312ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENSPre-requisite: (ELE1301 andELE1502 and ELE1801) or
C2422ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENSPre-requisite: (ELE1801 andELE1301 and ELE1502) or
C2513ELE3914 Electrical and Electronic Practice D
Students must be enrolled inone of the following Programs: MENS or MEPRPre-requisite: ELE1801 andELE1301 and ELE1502 or S
C2623ELE3915 Electrical and Electronic Practice E
tudents must be enrolled inone of the following Programs: MENS or MEPRPre-requisite: Students mustbe enrolled in one of the fol
C2723ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENSPre-requisite: ENG3902 andStudents must be enrolled in
C2814ENG4903 Professional Practice 2*
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.
1,384ENG4909 Work Experience - Professional^
Electives (Select from the following)
Pre-requisite: ELE1801 or Students must be enrolled in
22ELE2704 Electricity Supply Systems
one of the following Programs: MEPR or GCEN or METCor GEPRPre-requisite: ELE1301 or Students must be enrolled in
22ELE3307 Real Time Systems
one of the following Programs: GCEN or GCNS or METCor MENS or MEPR
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081186© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 12018)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
11ELE3807 Power Systems AnalysisPre-requisite: ELE1301 or Students must be enrolled in
11ELE4607 Advanced Digital Communications
one of the following Programs: GCEN or METC or GCNSor GDNS or MENS or MEPRPre-requisite: MEC2401 orELE2103 or Students must
22MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCENPre-requisite: ELE1801 or Students must be enrolled in
11ELE3804 Power Systems Protection
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡Students need to enrol in ENG4909 Work Experience - Professional to record their relevant work experience.*On-campus students should enrol in the external mode.^
Environmental Engineering Major recommended enrolmentStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
The course AGR2902 Field Practice may involve overnight field trips for which each student will be responsiblefor their own accommodation costs. This course is not offered in the on-campus mode. On-campus studentsshould enrol in the external mode.
Major study: Environmental Engineering (Major Study Code: 12015)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
1,211,21ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,2111ENM1600 Engineering Mathematics1,2121ENG1100 Introduction to Engineering Design1,2211ENG1101
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,3121CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
1,2,3211MEC1201 Engineering Materials2,3221ENG21022221SVY1500 Spatial Science for Engineers
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081187© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Environmental Engineering (Major Study Code: 12015)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Enrolment is not permitted inREN1201 if REN8101 hasbeen previously completed.
1312REN1201 Environmental Studies
Pre-requisite: ENM1600 orStudents must be enrolled in
1312ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCNPre-requisite: CIV1500 orCIV1501 or Students must be
1412ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPRPre-requisite: CIV1501 or Students must be enrolled in
1412MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR
2322Elective (Select from the Electives list)Pre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
2322ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENSPre-requisite: CIV1501 orCIV1500 or Students must be
2422CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPR
2422AGR2301 Agricultural Science1513AGR3304 Soil Science1,2,3523ENG2002 Technology, Sustainability and Society
Pre-requisite: ENV1101 orENV2103 or Students must
1513ENV3104 Hydraulics II
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
1,3613ENG3003 Engineering Management†
1613Elective (Select from the Electives list)2723ENG4110 Engineering Research Methodology2623ENV3105 Hydrology
Pre-requisite: ENV1101 orENV2103 or Students must
2623ENV4203 Public Health Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENV2105 orStudents must be enrolled in
1714ENV4204 Environmental Technology
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081188© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Environmental Engineering (Major Study Code: 12015)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
1714Elective (Select from the Electives list)Pre-requisite: ENG3902 andENG4110 and Students must
1814ENG4111 Research Project Part 1
be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH
1814Elective (Select from the Electives list)254ECO8012 Methods for Sustainable Development#
Pre-requisite: AGR3304 orStudents must be enrolled in
2724ENV4106 Irrigation Science
one of the following Programs: GCEN or GCSC or GDSIor METC or MEPR or GCNSor GDNS orMENS orMSCN.Pre-requisite: (ENV3104 andENV3105) or Students must
2824ENV4107 Water Resources Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENG4111 andStudents must be enrolled in
2824ENG4112 Research Project Part 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH
Practice Courses
C2,311,21ENG1901 Engineering Practice 1Pre-requisite or Co-requisite:ENG1901 and CIV2403
C2,3422CIV2901 Geology and Geomechanics Practice
Pre-requisite or Co-requisite:ENV2103 or ENV1101
C2,3422ENV2902 Hydraulics Practice
C35AGR2902 Field PracticeC263AGR3903 Soil and Water Engineering Practice 2^
Pre-requisite: ENV4203 orStudents must be enrolled in
C363ENV3904 Environmental Engineering Practice^
one of the following Programs: GDNS or MENS or MEPRor GEPRPre-requisite: Students mustbe enrolled in one of the fol
C2723ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENSPre-requisite: ENG3902 andStudents must be enrolled in
C2814ENG4903 Professional Practice 2*
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrol
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081189© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Environmental Engineering (Major Study Code: 12015)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
in ENG3902 and ENG4903in the same semester.
1,384ENG4909 Work Experience - Professional^
Electives (Select from the following)
1AGR3305 Precision and Smart Technologies inAgriculture
11CLI1110 Weather and Climate11CHE1110 Chemistry 1
Pre-requisite: CHE111022CHE2120 Chemistry 2Pre-requisite: CIV2401 orCIV2403 or Students must be
22CIV3403 Geotechnical Engineering
enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
22CIV3703 Transport Engineering1,2,31ECO1000 Economics2,32,3ENG4004 Engineering Project and Operations
Management‡
11ENV5205 Solid and Liquid Waste Treatment1,31GIS1402 Geographic Information Systems
Co-requisite: LAW1101 orLAW1500 or ENG2002 or
11LAW2107 Environmental Law**
REN1201 or (Students enrolled in BEDU (Legal Studies) or BLAW or LLBP orBALW or BBLA or BCLA orBCLW & Co-requisiteLAW1201 or LAW1111) or(Students enrolled in DJUR& Co-requisite LAW5501 orLAW5111)Pre-requisite: MAT1102 orENM1600 or equivalent or
22MAT2200 Operations Research 1
approval from the examiner.Enrolment is not permitted inMAT2200 if MAT1200 hasbeen previously completed.
22URP3201 Sustainable Urban Design and Development11SVY3202 Photogrammetry and Remote Sensing
FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†ECO8012 Methods for Sustainable Development is not offered in the on-campus mode. On-campus students should enrol in the online modeof this course.
#
On-campus students should enrol in the external mode.^Students need to enrol in ENG4909 Work Experience - Professional to record their relevant work experience.*The semester 3 offering of this course is offered in even numbered years only.‡Springfield campus only**
Instrumentation and Control Engineering Major recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081190© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
Students who have been granted an exemption from ELE1801 Electrical Technology are strongly advised topurchase the ELE1801 study guide from the USQ Bookshop and work through this prior to attempting coursesfor which ELE1801 is an enrolment requirement.
Major study: Instrumentation and Control Engineering (Major Study Code: 12019)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
1,21ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,21ENM1600 Engineering MathematicsPre-requisite: ENM1500 orENM1600 or Students must
2,31ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
1,21ENG1100 Introduction to Engineering Design1,22ENG110112ELE1301 Computer Engineering2,32ENG210222ELE1502 Electronic Circuits
Pre-requisite: ENM1600 orStudents must be enrolled in
13ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCN
13ELE2303 Embedded Systems Design23Elective (Select from the Electives list)23ELE2103 Linear Systems and Control
Pre-requisite: (ELE1502 andELE1801) or Students must
14ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETC or GEPR
14MEC2101Pre-requisite: ELE1502 or Students must be enrolled in
24ELE2504 Electronic Design and Analysis
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN or GEPRPre-requisite: ELE1301 or Students must be enrolled in
24ELE3307 Real Time Systems
one of the following Programs: GCEN or GCNS or METCor MENS or MEPR
1,2,35ENG2002 Technology, Sustainability and SocietyPre-requisite: ELE1801 or Students must be enrolled in
15ELE3803 Electrical Plant
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081191© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Instrumentation and Control Engineering (Major Study Code: 12019)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
25ELE3506 Electronic Measurement
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENSPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
25ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENSPre-requisite: ((MAT2500 orENM2600) andMEC2101) or
16MEC3102 Fluid Mechanics
Students must be enrolled inone of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: ELE2103 or Students must be enrolled in
16ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCor GEPR
1,2,36MEC1201 Engineering MaterialsPre-requisite: MEC2401 orELE2103 or Students must
26MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCEN
17ELE4109Measurement Science & Instrument Engineering>
Pre-requisite: MEC1201 orStudents must be enrolled in
17MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCEN
27ENG4110 Engineering Research Methodology27Elective (Select from the Electives list)1,38ENG3003 Engineering Management†
Pre-requisite: ENG3902 andENG4110 and Students must
18ENG4111 Research Project Part 1
be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENHPre-requisite: ENG4111 andStudents must be enrolled in
28ENG4112 Research Project Part 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH
2,38ENG4004 Engineering Project and Operations
Management‡
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081192© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Instrumentation and Control Engineering (Major Study Code: 12019)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Practice Courses
C2,31ENG1901 Engineering Practice 1C32ELE1911 Electrical and Electronic Practice A
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
C33ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENSPre-requisite: (ELE1301 andELE1502 and ELE1801) or
C24ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENSPre-requisite: (ELE1801 andELE1301 and ELE1502) or
C25ELE3914 Electrical and Electronic Practice D
Students must be enrolled inone of the following Programs: MENS or MEPR
C26MEC3905 Mechatronic PracticePre-requisite: Students mustbe enrolled in one of the fol
C27ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENSPre-requisite: ENG3902 andStudents must be enrolled in
C28ENG4903 Professional Practice 2*
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.
1,38ENG4909 Work Experience - Professional
Electives (Select from the following)
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,3CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
2ELE3107 Signal Processing1ELE3305 Computer Systems and Communications
ProtocolsPre-requisite: (ELE1502 andELE1801) or Students must
2ELE3805 Power Electronics Principles and Applications
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
1ELE3807 Power Systems Analysis2MEC3204 Production Engineering
Pre-requisite: MEC3102 orStudents must be enrolled in
1MEC4103 Heat Transfer
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081193© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Instrumentation and Control Engineering (Major Study Code: 12019)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
one of the following Programs: GCEN or METC or MEPRor MENSPre-requisite: ELE1801 or Students must be enrolled in
1ELE3804 Power Systems Protection
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
FootnotesOffered Odd Years Only>The semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡Students need to enrol in ENG4909 Work Experience - Professional to record their relevant work experience.*
Mechanical Engineering Major recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
Major study: Mechanical Engineering (Major Study Code: 12021)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
1,211,21ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,2111ENG11011,2211ENM1600 Engineering Mathematics1,2211ENG1100 Introduction to Engineering Design1,2,3121MEC1201 Engineering Materials2,3121ENG2102
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,3221CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
2221MEC2304 Solid Modelling1312MEC2101
Pre-requisite: ENM1600 orStudents must be enrolled in
1312ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCNPre-requisite: CIV1501 or Students must be enrolled in
1412MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081194© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Mechanical Engineering (Major Study Code: 12021)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
1,2,3412ENG2002 Technology, Sustainability and SocietyPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
2322ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENS
2322Elective (Select from the Electives list)Pre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
2422MEC2401 Dynamics I
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENS or GEPRPre-requisite: (MEC2402 andENG1100) or Students must
2422MEC2301 Design of Machine Elements
be enrolled in one of the following Programs: MEPR orGCEN or GEPRPre-requisite: MEC1201 orStudents must be enrolled in
1513MEC3203 Materials Technology
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENSPre-requisite: MEC1201 orStudents must be enrolled in
1513MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCENPre-requisite: ((MAT2500 orENM2600) andMEC2101) or
1613MEC3102 Fluid Mechanics
Students must be enrolled inone of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: (MEC2304 andMEC2401 and MEC2402) or
1613MEC3302 Computational Mechanics in Design
Students must be enrolled inone of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
2723ENG4110 Engineering Research MethodologyPre-requisite: MEC2301 orStudents must be enrolled in
2523MEC3303 Mechanical and Mechatronic System Design
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENSPre-requisite: ENM1500 orENM1600 or Students must
2,3623ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
2623MEC3204 Production EngineeringPre-requisite: MEC3102 orStudents must be enrolled in
1714MEC4103 Heat Transfer
one of the following Program
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081195© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Mechanical Engineering (Major Study Code: 12021)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
s: GCEN or METC or MEPRor MENS
1,3714ENG3003 Engineering Management†
Pre-requisite: ENG3902 andENG4110 and Students must
1814ENG4111 Research Project Part 1
be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH
2,3524Elective (Select from the Electives list)1814Elective (Select from the Electives list)
Pre-requisite: (MEC2401 and(MAT2500 or ENM2600)) or
2724MEC3403 Dynamics II
Students must be enrolled inone of the following Programs: GCEN or MEPR or GCNSor GDNSPre-requisite: ENG4111 andStudents must be enrolled in
2824ENG4112 Research Project Part 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH
2824Elective (Select from the Electives list)
Practice Courses
C2,321,21ENG1901 Engineering Practice 1C3312MEC2901 Mechanical Practice 1C1412MEC2902 Mechanical Practice 2C2523MEC3903 Mechanical Practice 3
Pre-requisite: MEC3102 orMEC2106 or Students must
C2624MEC3904 Mechanical Practice 4
be enrolled in one of the following Programs: GDNS orMENS or MEPRPre-requisite: Students mustbe enrolled in one of the fol
C2723ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENSPre-requisite: ENG3902 andStudents must be enrolled in
C2814ENG4903 Professional Practice 2*
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.
1,384ENG4909 Work Experience - Professional^
Electives (Select from the following)
11AGR2302 Agricultural Machinery
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081196© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Mechanical Engineering (Major Study Code: 12021)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: (ENG1100 andMEC2402) or (ENG1100 and
22CIV2503 Structural Design I
CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in: GCEN or GEPRPre-requisite: ELE2103 or Students must be enrolled in
11ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCor GEPRPre-requisite: MEC2401 orELE2103 or Students must
22MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCENPre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENSPre-requisite: ((MEC2101andMEC3102) or MEC2106)
11MEC4104 Renewable Energy Technology
or Students must be enrolledin one of the following Programs: GCEN or GCNS orGDNS or METC or MENS orMEPR
2,32,3ENG4004 Engineering Project and Operations
Management‡
22ELE2103 Linear Systems and ControlPre-requisite: CIV3506 orMEC3203 or Students must
1CIV8803 Advanced Mechanics and Technology of FibreComposites
be enrolled in one of the following Programs: GCEN orPGCN or METC or MEPR orGCNS or GDNS or MENS orMENC or MAEN
FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†Students need to enrol in ENG4909 Work Experience - Professional to record their relevant work experience.*On-campus students should enrol in the external mode.^The semester 3 offering of this course is offered in even numbered years only.‡
Mechatronic Engineering Major recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external students
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081197© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
for our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
Major study: Mechatronic Engineering (Major Study Code: 12022)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
1,2111ENM1600 Engineering Mathematics1,2111ENG11011,221,21ENG1002 Introduction to Engineering and Built
Environment Applications1,2211ENG1100 Introduction to Engineering Design
Pre-requisite: ENM1500 orENM1600 or Students must
2,3121ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
2,3121ENG2102Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,3221CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
2221MEC2304 Solid Modelling1312ELE1301 Computer Engineering
Pre-requisite: ENM1600 orStudents must be enrolled in
1312ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCNPre-requisite: CIV1501 or Students must be enrolled in
1412MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR
1,2,3412MEC1201 Engineering MaterialsPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
2322ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENS
2322Elective (Select from the Electives list)Pre-requisite: (MEC2402 andENG1100) or Students must
2422MEC2301 Design of Machine Elements
be enrolled in one of the following Programs: MEPR orGCEN or GEPRPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
2422MEC2401 Dynamics I
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENS or GEPR
1,2,3513ENG2002 Technology, Sustainability and Society
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081198© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Mechatronic Engineering (Major Study Code: 12022)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: (MEC2304 andMEC2401 and MEC2402) or
1513MEC3302 Computational Mechanics in Design
Students must be enrolled inone of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: MEC1201 orStudents must be enrolled in
1613MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCEN
1613Elective (Select from Electives list)2723ENG4110 Engineering Research Methodology2523ELE1502 Electronic Circuits2623ELE2103 Linear Systems and Control
Pre-requisite: MEC2301 orStudents must be enrolled in
2623MEC3303 Mechanical and Mechatronic System Design
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENS
1,3714ENG3003 Engineering Management†
1714ELE2303 Embedded Systems DesignPre-requisite: ENG3902 andENG4110 and Students must
1814ENG4111 Research Project Part 1
be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH
1814Elective (Select from the Electives list)2524Elective (Select from the Electives list)
Pre-requisite: ELE1502 or Students must be enrolled in
2724ELE2504 Electronic Design and Analysis
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN or GEPRPre-requisite: MEC2401 orELE2103 or Students must
2824MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCENPre-requisite: ENG4111 andStudents must be enrolled in
2824ENG4112 Research Project Part 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH
Practice Courses
C2,321,21ENG1901 Engineering Practice 1C3521ELE1911 Electrical and Electronic Practice A#
C3413MEC2901 Mechanical Practice 1C1512MEC2902 Mechanical Practice 2C263MEC3905 Mechatronic Practice^
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081199© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Mechatronic Engineering (Major Study Code: 12022)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: Students mustbe enrolled in one of the fol
C2723ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENSPre-requisite: ENG3902 andStudents must be enrolled in
C2814ENG4903 Professional Practice 2*
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.
1,384ENG4909 Work Experience - Professional^
Electives (Select from the following)
Pre-requisite: ELE2103 or Students must be enrolled in
11ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCor GEPR
2,32,3ENG4004 Engineering Project and Operations
Management‡
11ELE3305 Computer Systems and CommunicationsProtocols
Pre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
22ELE3506 Electronic Measurement
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENS
11MEC2101Pre-requisite: ((MAT2500 orENM2600) andMEC2101) or
11MEC3102 Fluid Mechanics
Students must be enrolled inone of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: MEC1201 orStudents must be enrolled in
11MEC3203 Materials Technology
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENS
22MEC3204 Production EngineeringPre-requisite: (MEC2401 and(MAT2500 or ENM2600)) or
22MEC3403 Dynamics II
Students must be enrolled inone of the following Programs: GCEN or MEPR or GCNSor GDNSPre-requisite: ((MEC2101andMEC3102) or MEC2106)
11MEC4104 Renewable Energy Technology
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081200© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Mechatronic Engineering (Major Study Code: 12022)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
or Students must be enrolledin one of the following Programs: GCEN or GCNS orGDNS or METC or MENS orMEPR
FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†On-campus students should not be confused by the recommended pre/co-requisites for this course and should enrol in Year 1 Semester 1. ThisPractice course, comprising a number of modules, is undertaken throughout the program. These modules will be undertaken in combinationwith the relevant academic course work in the prescribed semester.
#
On-campus students should enrol in the external mode.^Students need to enrol in ENG4909 Work Experience - Professional to record their relevant work experience.*The semester 3 offering of this course is offered in even numbered years only.‡
Power Engineering Major recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Students who have been granted an exemption from ELE1801 Electrical Technology are strongly advised topurchase the ELE1801 study guide from the USQ Bookshop and work through this prior to attempting coursesfor which ELE1801 is an enrolment requirement.
Major study: Power Engineering (Major Study Code:15932)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
1,2,3111MEC1201 Engineering Materials1,2211ENM1600 Engineering Mathematics1,211,21ENG1002 Introduction to Engineering and Built
Environment ApplicationsPre-requisite: ENM1500 orENM1600 or Students must
2,3121ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
1,2211ENG11011211ELE1301 Computer Engineering2,3221ENG21022221ELE1502 Electronic Circuits
Pre-requisite: ENM1600 orStudents must be enrolled in
1312ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCN
1312ELE2303 Embedded Systems Design2322Elective (Select from the Electives list)2322ELE2103 Linear Systems and Control1,2412ENG1100 Introduction to Engineering Design1412Elective (Select from the Electives list)
Pre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
2422ENG3104 Engineering Simulations and Computations
tudents must be enrolled in
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081201© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Power Engineering (Major Study Code:15932)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
one of the following Programs: GDET or METC or GDNSor MENS
2422Elective (Select from the Electives list)1,2,3513ENG2002 Technology, Sustainability and Society
Pre-requisite: ELE1801 or Students must be enrolled in
1513ELE3803 Electrical Plant
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: ELE1502 or Students must be enrolled in
2623ELE2504 Electronic Design and Analysis
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN or GEPRPre-requisite: (ELE1502 andELE1801) or Students must
2523ELE3805 Power Electronics Principles and Applications
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
1513ELE3305 Computer Systems and CommunicationsProtocols
Pre-requisite: ELE2103 or Students must be enrolled in
1613ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCor GEPR
2723ENG4110 Engineering Research Methodology1623Elective (Select from the Electives list)1714ELE3807 Power Systems Analysis
Pre-requisite: ELE1801 or Students must be enrolled in
1714ELE3804 Power Systems Protection
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
1,3814ENG3003 Engineering Management†
Pre-requisite: ENG3902 andENG4110 and Students must
1814ENG4111 Research Project Part 1
be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENHPre-requisite: ELE1801 or Students must be enrolled in
2724ELE2704 Electricity Supply Systems
one of the following Programs: MEPR or GCEN or METCor GEPR
2624Elective (Select from the Electives list)Pre-requisite: ENG4111 andStudents must be enrolled in
2824ENG4112 Research Project Part 2
one of the following Program
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081202© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Power Engineering (Major Study Code:15932)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
s: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH
2,3824ENG4004 Engineering Project and Operations
Management‡
Practice Courses
C2,311,21ENG1901 Engineering Practice 1C3221ELE1911 Electrical and Electronic Practice A
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
C3312ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENSPre-requisite: (ELE1301 andELE1502 and ELE1801) or
C2422ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENSPre-requisite: (ELE1801 andELE1301 and ELE1502) or
C2513ELE3914 Electrical and Electronic Practice D
Students must be enrolled inone of the following Programs: MENS or MEPRPre-requisite: ELE1801 andELE1301 and ELE1502 or S
C2623ELE3915 Electrical and Electronic Practice E
tudents must be enrolled inone of the following Programs: MENS or MEPRPre-requisite: Students mustbe enrolled in one of the fol
C2723ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENSPre-requisite: ENG3902 andStudents must be enrolled in
C2814ENG4903 Professional Practice 2*
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.
1,384ENG4909 Work Experience - Professional^
Electives (Select from the following)
11CIV2605 Construction EngineeringPre-requisite: CIV1501 orCIV1500 or Students must be
22CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPR
22GIS1401 Geographic Data Presentation1,31GIS1402 Geographic Information Systems
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081203© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Major study: Power Engineering (Major Study Code:15932)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
11ENV2201 Land StudiesPre-requisite: ELE1301 or Students must be enrolled in
22ELE3307 Real Time Systems
one of the following Programs: GCEN or GCNS or METCor MENS or MEPR
22ELE3107 Signal ProcessingPre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,32CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPRPre-requisite: CIV1500 orCIV1501 or Students must be
22MEC2106 Introduction to Thermofluids
enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENS or GEPRPre-requisite: ((MEC2101andMEC3102) or MEC2106)
11MEC4104 Renewable Energy Technology>
or Students must be enrolledin one of the following Programs: GCEN or GCNS orGDNS or METC or MENS orMEPR
FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡Students need to enrol in ENG4909 Work Experience - Professional to record their relevant work experience.*On-campus students should enrol in the external mode.^Students wishing to study MEC4104 Renewable Energy Technology should study CIV1501 Engineering Statics as their second Elective.>
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081204© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Engineering (BENG) - BEng (2022)
Bachelor of Spatial Science (BSPS) - BSpScQTAC code (Australian and New Zealand applicants): Toowoomba campus: 907222; External: 907225
CRICOS code (International applicants): 053511E
This program is offered only to continuing students. No new admissions will be accepted. Students whoare interested in this study area should consider the Bachelor of Spatial Science (Honours) which will beoffered from S1 2014.
ExternalOn-campus
No new admissionsNo new admissionsStart:
-ToowoombaCampus:
Commonwealth supported placeCommonwealth supported placeFees:Domestic full fee paying placeDomestic full fee paying placeInternational full fee paying placeInternational full fee paying place
4 years full-time, 8 years part-time or externalStandard duration:
From: Associate Degree of Spatial Science; Bachelor of Spatial Science TechnologyProgramarticulation: To: ; Master of Spatial Science Technology
Contact us
Current students
Ask a questionFreecall (within Australia): 1800 007 252Phone (from outside Australia): +61 7 4631 2285Email [email protected]
Professional accreditationThe Bachelor of Spatial Science (Surveying) is fully accredited by the Surveyors Board of Queensland andis recognised in every Australian state and in New Zealand through reciprocal arrangements. The degree,together with relevant industry experience, enables registration and/or licensing as a professional surveyorwith the Boards of Surveyors in Australia and New Zealand.
Provisional accreditation of the Bachelor of Spatial Science (Urban and Regional Planning will be soughtfrom the Planning Institute of Australia during 2013.
Graduates from the Bachelor of Spatial Science are eligible to apply for membership with the Surveying andSpatial Science Institute Australia
Program aimsThe Bachelor of Spatial Science program provides students with the educational requirements to become aprofessional spatial scientist and the ability to undertake postgraduate studies. The program equips studentswith a core of basic theoretical, scientific, analytical, managerial, professional, research and communicationskills that will permit them to undertake an in-depth study of the fundamental science and practice of spatialscience in one of three fields: Geographic Information Systems (GIS),Surveying or Urban and RegionalPlanning.
In addition, students obtain knowledge of the natural, legal, commercial, industrial and social environmentsin which they will function as professionals. The program instils in students the need for continuing professionaldevelopment and gives them the ability to adapt to change.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081205© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Spatial Science (BSPS) - BSpSc (2022)
The program is designed to identify, and award honours to, students who have the capacity to undertake studyat an advanced level and to make an original contribution to the fundamental science and practice of spatialscience. The award of honours will be determined by academic performance and is normally based on astudent's grade point average (GPA).
Program objectivesA student who successfully completes the Bachelor of Spatial Science should be able to demonstrate:
● a broad knowledge of basic scientific and technical skills● a high level of computer literacy skills appropriate to their field of study● a high level of written and oral communication skills● a capacity for analysis, evaluation and synthesis● an understanding of, and ability to undertake, the processes required to collect, store, and manipulate a
variety of spatial data● a capacity to adapt to change and to apply innovation● an understanding of the natural, social, professional, industrial and technical environments in which they
will practice● a knowledge of professional journals and other information sources related to the spatial science industry,
the skills required to access information from those sources, and an aptitude to undertake further learningand study
● an ability to undertake applied research in a field of the spatial science discipline● a knowledge of the financial and management principles and practices that are used to manage a
professional office● a knowledge of surveying, spatial information systems or urban and regional planning of sufficient depth
to gain employment, certification and, where appropriate, registration as a Professional Surveyor, SpatialScientist or Planner.
Program Information SetView USQ’s admission criteria, student profiles and a summary of all offers made under Course AdmissionInformation Set via the QTAC website.
Admission requirementsTo be eligible for admission, applicants must satisfy the following requirements:
● Geographic Information Systems and Surveying majors: have studied four semester units and achievedan exit assessment of 'Sound Achievement' or better in each of the following Queensland Senior SecondarySchool subjects: English and Mathematics B. It is recommended that applicants should also havesatisfactorily completed the subject: Physics
● Urban and Regional Planning Major: have studied four semester units and achieved an exit assessmentof 'Sound Achievement' or better in each of the following Queensland Senior Secondary subjects: Englishand Mathematics A.
or
● be able to demonstrate that they have achieved an equivalent standard in these subjects at another institution
and
● Australian applicants: have achieved a Queensland Overall Position (OP) band, or an equivalent Rankbased on qualifications and previous work experience, at or above the specified cut-off level
All students are required to satisfy the applicable English language requirements.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081206© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Spatial Science (BSPS) - BSpSc (2022)
If students do not meet the English language requirements they may apply to study a University-approvedEnglish language program. On successful completion of the English language program, students may beadmitted to an award program.
Program fees
Commonwealth supported placeA Commonwealth supported place is where the Australian Government makes a contribution towards the costof a students' higher education and students pay a student contribution amount, which varies depending onthe courses undertaken. Students are able to calculate the fees for a particular course via the Course FeeSchedules.
Commonwealth Supported students may be eligible to defer their fees through a Government loan calledHECS-HELP.
Domestic full fee paying placeDomestic full fee paying places are funded entirely through the full fees paid by the student. Full fees varydepending on the courses that are taken. Students are able to calculate the fees for a particular course via theCourse Fee Schedule
Domestic full fee paying students may be eligible to defer their fees through a Government loan called FEE-HELP provided they meet the residency and citizenship requirements.
Australian citizens, Permanent Humanitarian Visa holders, Permanent Resident visa holders and New Zealandcitizens who will be resident outside Australia for the duration of their program pay full tuition fees and arenot eligible for FEE-Help.
International full fee paying placeInternational students pay full fees. Full fees vary depending on the courses that are taken and whether theyare studied on-campus, via distance education/online. Students are able to calculate the fees for a particularcourse via the Course Fee Schedules.
Program structureThe Bachelor of Spatial Science is a 32-unit program consisting of Academic courses and Practice courses.
Academic courses are normally one-unit courses and involve approximately 155 hours of student work perunit.
Practice courses are zero unit courses and each involves approximately 50 hours of student work. The onlygrades available for a Practice Course are Pass (P) and Fail (F). A Practice Course is designed to enablestudents to acquire specific competencies associated with their major study. The competencies range fromspecific practical and communication skills through to generic competencies relating to ethical and socialresponsibility, awareness of the environment, teamwork, etc. For an external student a Practice Course generallyinvolves attendance on-campus for a one-week residential school.
Program completion requirementsThe Bachelor of Spatial Science Program normally involves four years of full-time study or eight years ofpart-time study.
Students must complete the program within a maximum period of six years of full-time study, or 12 years ofpart-time study, from the date of their initial enrolment. To graduate from a particular major students mustsuccessfully complete all of the core courses plus the specialist and Practice courses in that major, includingthe required number of Electives.
Required time limitsFull-time students have a maximum of six years to complete this program. Part-time students have a maximumof 12 years to complete this program.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081207© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Spatial Science (BSPS) - BSpSc (2022)
A pro-rata adjustment of the maximum time period will apply for those students who transfer from one modeof study to another. A pro-rata reduction in the maximum time period will apply to students who are admittedto a program with advanced standing.
Practical experiencePractical experience is desirable and encouraged but is not required for the completion of the Bachelor ofSpatial Science program. Students are encouraged to obtain practical experience during vacation periods.
IT requirementsAccess to an up-to-date computer is necessary. On-campus students can access appropriately equippedlaboratories, but should consider acquisition of their own computer. External students should be able to accessa computer with the following minimum standards as advised by the University. All students should haveaccess to email and the Internet via a computer running the latest versions of Internet web browsers such asInternet Explorer or Firefox. The University has a wireless network for on-campus students' computers. Inorder to take advantage of this facility and further enhance their on-campus learning environment, studentsshould consider purchasing a notebook/laptop computer with wireless connectivity. A notebook/laptop maybe required for some courses.
Residential schoolsThe attendance requirement of residential schools within this degree is indicated by the following letters: R= Recommended; HR = Highly Recommended; M = Mandatory. To find out more about residential schools,visit the Residential School Schedule to view specific dates for your degree, or visit the Policy and ProcedureLibrary.
External students are required to attend a number of residential schools during their program. These areassociated with Practice courses and are normally conducted at the end of Semester 3 (February), or duringthe mid-semester recess in Semester 2 (September/October).
Students enrolled in the external offer of a Practice Course must attend the residential school for that course.In some cases students enrolled in the on-campus mode may also be required to attend the residential school.Students should only enrol in a Practice Course when they are able to attend the residential school for thatcourse. Practice courses may not be taken earlier than shown except with the permission of the Faculty ofHealth, Engineering and Sciences. In some cases students may enrol in two Practice courses in one term sothey can complete the two residential schools in a two-week period. The actual dates for each residentialschool are shown in the Residential School schedule in this Handbook.
Safety boots are compulsory in engineering laboratories for several of the Practice courses and are stronglyrecommended for all other Practice courses.
Practice courses
The majority of the practical and professional experience requirements for the program are contained withinthe major recommended enrolment pattern in the following table. These are zero unit courses, which are acompulsory part of the program, however they do not attract a student contribution charge for AustralianResidents or a tuition fee for international students.
Elective courses
Elective courses are included in the list of Academic courses. Students should select these courses from theElectives list. Students may undertake only one appropriate level five or level eight course from this programor another program in the area of Engineering and Built Environment as an Elective with the approval of theFaculty of Health, Engineering and Sciences.
ArticulationGraduates of an Associate Degree in Spatial Science majoring in Surveying or GIS, would normally be eligiblefor up to 16 units of credit towards the Bachelor of Spatial Science Technology within the same field. Similarly,Bachelor of Spatial Science Technology graduates would normally be eligible for up to 24 units of credit
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081208© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Spatial Science (BSPS) - BSpSc (2022)
towards the Bachelor of Spatial Science degree within the same field. Graduates of an Associate Degree inSpatial Science majoring in Urban and Regional Planning would normally be eligible for up to 16 courses ofcredit towards the Bachelor of Spatial Science within the same field.
Students who have completed an associate degree or certificate program in surveying more than five yearsago are eligible to claim advanced standing. The number of units of advanced standing granted will dependupon the nature and currency of the studies undertaken, and on the major study undertaken.
The programs in Surveying, Geographic Information Systems and Urban and Regional Planning also articulateto and from each other and enable students to move between Surveying, Geographic Information Systemsand Regional Planning degrees, whilst still retaining a significant amount of credit.
Prospective students who wish to upgrade an existing qualification should contact the Faculty to obtaininformation about likely exemptions and recommended enrolment patterns for their upgrade program.
Exit pointsStudents who, for whatever reason, are unable to complete the Bachelor of Spatial Science and who satisfyall of the requirements of either the Bachelor of Spatial Science Technology, the Associate Degree of SpatialScience or the Diploma of Engineering Studies may be permitted to exit with that award.
HonoursThe Bachelor of Spatial Science may be awarded with Honours. The class of honours to be awarded to astudent is dependent upon:
● the Grade Point Average calculated from the grades achieved in the courses studied in, or transferred to,the program;
● the grade achieved by the student in the courses ENG4111 Research Project Part 1 and ENG4112 ResearchProject Part 2 (unless the student is exempted from these courses).
The minimum levels of achievement normally required for each class of honours are shown in the followingtable. To be assured of achieving a particular class of honours students must have achieved the specified gradein the research project courses and the minimum GPA requirements for all of the courses studied, for the last16 courses studied, or for the last eight courses studied.
Minimum GradeAchieved in
Research ProjectCourses
GPA Calculated from the Grades Achieved in:Class of HonoursThe Last Eight
Courses
Studied*#
The Last 16Courses
Studied*#
All Courses Studied in theProgram
A6.56.26.0First Class Honours
B5.95.75.5Second Class Honours -Division A
C5.35.15.0Second Class Honours -Division B
81620Minimum number ofcourses required
FootnotesThe results from courses ENG4111 and ENG4112 must be included (unless the student is exempted from these courses).*The best results in a semester are to be used when not all of the results from a semester are required.#
Geographic Information Systems Major recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external students
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081209© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Spatial Science (BSPS) - BSpSc (2022)
for our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
Geographic Information Systems Major recommended enrolment pattern
Major study: Geographic Information Systems (Major Study Code: 15407)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
1,2111ENM1600 Engineering Mathematics1,3111GIS1402 Geographic Information Systems1211SVY1102 Surveying A1,2211ENG11012121GIS1401 Geographic Data Presentation1,211,21ENG1002 Introduction to Engineering and Built
Environment Applications2221SVY1110 Introduction to Global Positioning System1,2221CSC1401 Foundation Programming1312Elective (Select from Electives list)1312SVY3202 Photogrammetry and Remote Sensing
Pre-requisite: GIS1402 andCSC1401 or Students must
1412GIS3407 GIS Programming and Visualisation
be enrolled in one of the following Programs: GDST orMSST or GCST or MENS orMSPT
1,2,3412ENG2002 Technology, Sustainability and Society2322URP3201 Sustainable Urban Design and Development2,3322ENG21022422SVY3200 Land Administration2422GIS3405 Spatial Analysis and Modelling1,3513CIS20021513ENV2201 Land Studies1613SVY4309 Practice Management for Spatial Scientists2523Elective (Select from the Electives list)2523GIS3406 Remote Sensing and Image Processing2723ENG4110 Engineering Research Methodology
Pre-requisite: GIS1402 or Students must be enrolled in
2623GIS4407 Web Based Geographic Information System
one of the following Programs: GCST or GDST or MSSTor MSPT or GCNS or GDNSor MENS
1714Elective (Select from the Electives list)Pre-requisite: CSC1401 orStudents must be enrolled in
1,3714CSC2402 Object-Oriented Programming in C++
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTNPre-requisite: ENG3902 andENG4110 and Students must
1814ENG4111 Research Project Part 1^+
be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC or
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081210© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Spatial Science (BSPS) - BSpSc (2022)
Major study: Geographic Information Systems (Major Study Code: 15407)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
BEHB or BEHI or BEHS orBENG or BENHCo-requisite: LAW1101 orLAW1500 or ENG2002 or
18LAW2107 Environmental Law*
REN1201 or (Students enrolled in BEDU (Legal Studies) or BLAW or LLBP orBALW or BBLA or BCLA orBCLW & Co-requisiteLAW1201 or LAW1111) or(Students enrolled in DJUR& Co-requisite LAW5501 orLAW5111)
1,2,3724ACC1101 Accounting for Decision-MakingPre-requisite: CSC1401 orStudents must be enrolled in
2624CSC2406 Web Technology 1
one of the following Programs: UCCC or GDTI or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTNor BSED
2824Elective (Select from the Electives list)Pre-requisite: ENG4111 andStudents must be enrolled in
2824ENG4112 Research Project Part 2^++
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH
Practice Courses
C1211SVY1901 Surveying and Spatial Science Practice 1Pre-requisite: SVY1901 andSVY1104 and SVY1110 andGIS1401
C3412SVY2902 Surveying and Spatial Science Practice 2#
Pre-requisite: SVY1901 andSVY2301 and SVY2106 andSVY3202
C3523SVY2903 Surveying and Spatial Science Practice 3>
Pre-requisite: Students mustbe enrolled in one of the fol
C2723ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENSPre-requisite: ENG3902 andStudents must be enrolled in
C2814ENG4903 Professional Practice 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.
Electives (Select from the following)
11CIS3001Pre-requisite: MAT1500 orENG1500 or ENM1500 or
11CIV2701 Road Design and Location
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081211© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Spatial Science (BSPS) - BSpSc (2022)
Major study: Geographic Information Systems (Major Study Code: 15407)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
ENM1600 or Students mustbe enrolled in one of the following Programs: GCST orGDST or GCEN or GEPRPre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS
1,31,3ENG3003 Engineering Management†
1,2,31MGT1000 Organisational Behaviour1,2,31MKT1001 Introduction to Marketing11MAT1102 Algebra and Calculus I^^
22AGR2301 Agricultural ScienceEnrolment is not permitted inREN1201 if REN8101 hasbeen previously completed.
11REN1201 Environmental Studies
2REN3302 Sustainable Resource UsePre-requisite: SVY1102 orSVY1500 or Students must
22SVY1104 Survey Computations A
be enrolled in one of the following Programs: GCST orGDST or MSPT
FootnotesIt is recommended that these courses are undertaken in the same academic year.^It is recommended that students in the Bachelor of Spatial Science should have completed ENG3902 prior to undertaking this course.+Springfield campus only*It is recommended that students in the Bachelor of Spatial Science should also be enrolled in ENG4903 while undertaking this course.++Students who have completed GIS2901 do not need to undertake SVY2902.#Students who have completed GIS3901 do not need to undertake SVY2903.>The semester 3 offering of this course is offered in odd numbered years only.†Replaces MAT1502 in the previous Handbook. Students should enrol in this course only if they have completed MAT1500 and Not MAT1502.Students undertaking ENM1600 are not required to complete MAT1502 and should choose an elective course in place of MAT1502
^^
Notes:
For students transferring from one program to another a complete list of enrolment requirements are available in the course specification.
Other courses may be admissible as an Elective. However students must obtain approval from the Faculty of Health, Engineering and Sciences priorto enrolling in the course. Students may undertake only one appropriate level five or level eight course from this program or another program in thearea of Engineering and Built Environment as an Elective with the approval of the Faculty of Health, Engineering and Sciences.
Surveying Major recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081212© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Spatial Science (BSPS) - BSpSc (2022)
Surveying Major recommended enrolment pattern
Major study: Surveying (Major Study Code: 15408)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
1,2111ENM1600 Engineering Mathematics1,3111GIS1402 Geographic Information Systems1211SVY1102 Surveying A1,2211ENG11012121SVY1110 Introduction to Global Positioning System1,211,21ENG1002 Introduction to Engineering and Built
Environment ApplicationsPre-requisite: SVY1102 orSVY1500 or Students must
2221SVY1104 Survey Computations A
be enrolled in one of the following Programs: GCST orGDST or MSPT
2221GIS1401 Geographic Data PresentationPre-requisite: SVY1104 or Students must be enrolled in
1312SVY2301 Automated Surveying Systems
one of the following Programs: GCST or GDST or MSPTPre-requisite: SVY1110 andSVY1102 or Students must
1312SVY2106 Geodetic Surveying A
be enrolled in one of the following Programs: GCNS orGCST or GDNS or GDST orMSST or MSPT or MENSPre-requisite: MAT1500 orENG1500 or ENM1500 or
1412CIV2701 Road Design and Location
ENM1600 or Students mustbe enrolled in one of the following Programs: GCST orGDST or GCEN or GEPR
Elective (Select from the Electives list)2,3322ENG2102
Pre-requisite: SVY11042322SVY2303 Construction Surveying1,2422CSC1401 Foundation Programming
Pre-requisite: (SVY1102 andSVY1104) or Students must
2422SVY3304 Cadastral Surveying (Queensland)
be enrolled in one of the following Programs: GCNS orGCST or GDNS or GDST orMSST or MSPT or MENS
1513SVY3202 Photogrammetry and Remote SensingPre-requisite: SVY1104 or Students must be enrolled in
1513SVY2302 Mine Surveying
one of the following Programs: GCNS or GCST or GDNSor GDST or MSPT
1613ENV2201 Land Studies1,2,3613ENG2002 Technology, Sustainability and Society
Pre-requisite: ENM1600 andSVY2106 or Students must
2523SVY2105 Survey Computations B
be enrolled in one of the following Programs: GCNS or
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081213© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Spatial Science (BSPS) - BSpSc (2022)
Major study: Surveying (Major Study Code: 15408)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
GCST or GDNS or GDST orMSST or MSPT or MENS
2723ENG4110 Engineering Research Methodology2623URP3201 Sustainable Urban Design and Development
Pre-requisite: SVY1110 andSVY2105 or Students must
2623SVY3107 Geodetic Surveying B
be enrolled in one of the following Programs: GCNS orGCST or GDNS or GDST orMSST or MSPT
1714SVY4309 Practice Management for Spatial ScientistsPre-requisite: ENG3902 andENG4110 and Students must
1714ENG4111 Research Project Part 1+
be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH
1814Elective (Select from the Electives list)1,2,3524ACC1101 Accounting for Decision-Making2724SVY4304 Land and Cadastral Law2824SVY3200 Land Administration
Pre-requisite: ENG4111 andStudents must be enrolled in
2824ENG4112 Research Project Part 2++
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH
Practice Courses
C1211SVY1901 Surveying and Spatial Science Practice 1Pre-requisite: SVY1901 andSVY1104 and SVY1110 andGIS1401
C3312SVY2902 Surveying and Spatial Science Practice 2
Pre-requisite: SVY1901 andSVY2301 and SVY2106 andSVY3202
C3422SVY2903 Surveying and Spatial Science Practice 3
Pre-requisite: SVY2902 orSVY2903 and SVY3304 orSVY3306 and SVY3202
C2,363SVY3904 Surveying and Spatial Science Practice 4~
Pre-requisite: Students mustbe enrolled in one of the fol
C2723ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENSPre-requisite: ENG3902 andStudents must be enrolled in
C2814ENG4903 Professional Practice 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081214© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Spatial Science (BSPS) - BSpSc (2022)
Major study: Surveying (Major Study Code: 15408)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Electives (Select from the following)
11CIV2605 Construction EngineeringPre-requisite: CIV1500 orCIV1501 or Students must be
11ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPRPre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENSPre-requisite: GIS1402 andCSC1401 or Students must
11GIS3407 GIS Programming and Visualisation
be enrolled in one of the following Programs: GDST orMSST or GCST or MENS orMSPT
1,2,31MGT1000 Organisational Behaviour11MAT1102 Algebra and Calculus I^^
22CIV3703 Transport EngineeringPre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,32CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPRPre-requisite: ENV2103 orENV1101
22CIV2702 Municipal Services
22GIS3405 Spatial Analysis and Modelling22GIS3406 Remote Sensing and Image Processing
Pre-requisite: GIS1402 or Students must be enrolled in
22GIS4407 Web Based Geographic Information System
one of the following Programs: GCST or GDST or MSSTor MSPT or GCNS or GDNSor MENSCo-requisite: LAW1101 orLAW1500 or ENG2002 or
11LAW2107 Environmental Law*
REN1201 or (Students enrolled in BEDU (Legal Studies) or BLAW or LLBP orBALW or BBLA or BCLA orBCLW & Co-requisiteLAW1201 or LAW1111) or(Students enrolled in DJUR& Co-requisite LAW5501 orLAW5111)Enrolment is not permitted inREN1201 if REN8101 hasbeen previously completed.
11REN1201 Environmental Studies
2REN3302 Sustainable Resource Use
FootnotesIt is recommended that students in the Bachelor of Spatial Science should have completed ENG3902 prior to undertaking this course.+It is recommended that students in the Bachelor of Spatial Science should also be enrolled in ENG4903 while undertaking this course.++On-campus students should enrol in the external offering of this course.~
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081215© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Spatial Science (BSPS) - BSpSc (2022)
Replaces MAT1502 in the previous Handbook. Students should enrol in this course only if they have completed MAT1500 and Not MAT1502.Students undertaking ENM1600 are not required to complete MAT1502 and should choose an elective course in place of MAT1502
^^
Springfield campus only*
Notes:
For students transferring from one program to another a complete list of enrolment requirements are available in the course specification .
Students may undertake only one appropriate level five or level eight course from this program or another program in the area of Engineering andBuilt Environment as an Elective with the approval of the Faculty of Health, Engineering and Sciences.
Urban and Regional Planning major recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
Urban and Regional Planning recommended enrolment pattern
Major study: Major Study Code 16735Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses
1111SVY1102 Surveying A1,3111GIS1402 Geographic Information Systems1211URP1001 Introduction to Urban and Regional Planning1,2211ENG11012121GIS1401 Geographic Data Presentation1,2121ENG1002 Introduction to Engineering and Built
Environment Applications2221LAW11012221CMG1001 Introduction to Construction Management
and the Built Environment1312ENV2201 Land Studies1312ECO1000 Economics1412PRL2002 Community Consultation and Development1412URP2001 Planning Structures and Statutory Planning2322URP2002 Local Government Planning Practice and
Technology232SVY1110 Introduction to Global Positioning System2,3422ENG21022422Elective (Select from the Electives list)1513SVY3202 Photogrammetry and Remote Sensing1513ACC1101 Accounting for Decision-Making1613ECO2000 The Macro-economy and Business1613Elective (Select from the Electives list)2523REN3302 Sustainable Resource Use2523STA3100 Data Analysis in the Social Sciences2623URP3201 Sustainable Urban Design and Development2723ENG4110 Engineering Research Methodology1714SVY4309 Practice Management for Spatial Scientists1814Elective (Select from the Electives list)
Pre-requisite: ENG3902 andENG4110 and Students must
1814ENG4111 Research Project Part 1^+
be enrolled in one of the fol
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081216© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Spatial Science (BSPS) - BSpSc (2022)
Major study: Major Study Code 16735Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENHPre-requisite: URP1001 orSVY4203 or Students must
2724URP4001 Movement Network Planning
be enrolled in one of the following Programs: BENH orMEPR
2624SVY3200 Land AdministrationPre-requisite: GIS1402 or Students must be enrolled in
2824GIS4407 Web Based Geographic Information System
one of the following Programs: GCST or GDST or MSSTor MSPT or GCNS or GDNSor MENSPre-requisite: ENG4111 andStudents must be enrolled in
2824ENG4112 Research Project Part 2^++
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH
Practice Courses
C1211SVY1901 Surveying and Spatial Science Practice 1Pre-requisite: SVY1901 andSVY1104 and SVY1110 andGIS1401
C3312SVY2902 Surveying and Spatial Science Practice 2
Pre-requisite: SVY1901 andSVY2301 and SVY2106 andSVY3202
C3623SVY2903 Surveying and Spatial Science Practice 3
Pre-requisite: Students mustbe enrolled in one of the fol
C2723ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENSPre-requisite: ENG3902 andStudents must be enrolled in
C2814ENG4903 Professional Practice 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.
Electives (Select from the following)
1,31ANT1001 Cultural Diversity: an Introduction toAnthropology
11CLI1110 Weather and Climate11AGR3304 Soil Science11CLI3301 Climate and Environment Risk Assessment11ECO3030 Sustainable Economies
1POL3013 Sustainability and Politics1,2,31MGT1000 Organisational Behaviour
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081217© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Spatial Science (BSPS) - BSpSc (2022)
Major study: Major Study Code 16735Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
22ANT3006 Indigenous Peoples in the Nation*
22CLI3302 Adaptation to Climate Change22GIS3405 Spatial Analysis and Modelling22GIS3406 Remote Sensing and Image Processing
Co-requisite: LAW1101 orLAW1500 or ENG2002 or
11LAW2107 Environmental Law**
REN1201 or (Students enrolled in BEDU (Legal Studies) or BLAW or LLBP orBALW or BBLA or BCLA orBCLW & Co-requisiteLAW1201 or LAW1111) or(Students enrolled in DJUR& Co-requisite LAW5501 orLAW5111)
22PRL3003 Public Sector and Public ServiceCommunication
22SVY4304 Land and Cadastral Law
FootnotesIt is recommended that these courses are undertaken in the same academic year.^It is recommended that students in the Bachelor of Spatial Science should have completed ENG3902 prior to undertaking this course.+It is recommended that students in the Bachelor of Spatial Science should also be enrolled ENG4903 while undertaking this course.++Offered odd years only.*Springfield campus only**
Notes:
For students transferring from one program to another a complete list of enrolment requirements are available in the course specification .
Students may undertake only one appropriate level five or level eight course from this program or another program in the area of Engineering andBuilt Environment as an Elective with the approval of the Faculty of Health, Engineering and Sciences.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081218© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.(DISCONTINUED) Bachelor of Spatial Science (BSPS) - BSpSc (2022)
Bachelor of Construction (Honours) (BCNH) - BCon(Hons)QTAC code (Australian and New Zealand applicants): External: 907415; Springfield campus: 927411
CRICOS code (International applicants): 089494D
This program is currently undergoing internal reaccreditation. This may result in changes to theprogram for 2022.
ExternalOn-campus
Semester 1 (February)Semester 2 (July)
Semester 1 (February)Semester 2 (July)
Start:
-SpringfieldCampus:
Commonwealth supported placeCommonwealth supported placeFees:Domestic full fee paying placeDomestic full fee paying placeInternational full fee paying placeInternational full fee paying place
4 years full-time, 8 years part-timeStandard duration:
From: Associate Degree of ConstructionProgramarticulation:
Contact us
Current studentsFuture International studentsFuture Australian and NewZealand students
Ask a questionFreecall (within Australia): 1800007 252Phone (from outside Australia): +617 4631 2285Email [email protected]
Ask a questionPhone: +61 7 4631 5543Email: [email protected]
Ask a questionFreecall (within Australia): 1800269 500Phone (from outside Australia): +617 4631 5315Email: [email protected]
Professional accreditationThe Bachelor of Construction (Honours) is an accredited program of the Royal Institute of Chartered Surveyors(RCIS) with the University of Southern Queensland as a recognised partner university. Graduates areinternationally recognised with competencies in construction management.
Graduates meet the Queensland Building and Construction Commission’s technical qualification requirementsto hold a Builder Open class of licence and a Builder Project Management Services licence subject todemonstrating the required level of industry experience.
Professional accreditation is being sought from the Australian Institute of Building.
Program aimsThe program aims to produce professional level graduates for the building industry who have a broad rangeof relevant technical skills and well developed skills in communication and team work.
The program is designed to capitalise on growing demand and the primary aims are to:
● enable graduates to attain a diverse range of skills and competence to successfully manage a wide rangeof construction projects
● develop ability to plan, monitor and control the technical, logistical, legal and financial aspects associatedwith building and construction projects
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081219© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Construction (Honours) (BCNH) - BCon(Hons) (2022)
● accept a leadership role in planning, managing and organising people and other resources on constructionprojects in the built environment.
Program objectivesAt the completion of the program the graduate will be able to:
● apply building principles and methods● prepare documentation for building development and construction● advise and liaise with other members of the building team, clients and other external stakeholders● apply relevant legislation and technical standards in building construction● actively manage the human relations, resources, scheduling, quality control, environmental factors and
social impacts involved for a building project.
Australian Qualifications FrameworkThe Australian Qualifications Framework (AQF) is a single national, comprehensive system of qualificationsoffered by higher education institutions (including universities), vocational education and training institutionsand secondary schools. Each AQF qualification has a set of descriptors which define the type and complexityof knowledge, skills and application of knowledge and skills that a graduate who has been awarded thatqualification has attained, and the typical volume of learning associated with that qualification type.
This program is at AQF Qualification Level 08. Graduates at this level will have advanced knowledge andskills for professional or highly skilled work and/or further learning.
The full set of levels criteria and qualification type descriptors can be found by visiting www.aqf.edu.au.
Program Information SetView USQ’s admission criteria, student profiles and a summary of all offers made under Course AdmissionInformation Set via the QTAC website.
Admission requirementsTo be eligible for admission, applicants must satisfy the following requirements:
● Have achieved a minimum Australian Tertiary Admission Rank (ATAR) of 65.6, or equivalentqualification.^
● Subject Pre-requisites: English (Units 3 & 4, C), General Mathematics (Units 3 & 4, C) or equivalent.● English Language proficiency requirements for Category 2.
Applicants are advised to also note the following:
● Recommended Prior Study: Mathematical Methods (Units 3 & 4, C) or equivalent.
All students are required to satisfy the applicable English language requirements.
If students do not meet the English language requirements they may apply to study a University-approvedEnglish language program. On successful completion of the English language program, students may beadmitted to an award program.
These are determined by the University for specific programs each Semester. The 2021 ATAR andtertiary entrance ranks are based on agreed QTAC schedules which assess formal study at Year 12 or
^
equivalent level, tertiary, preparatory, professional or vocational qualifications or work experience, asdetailed in the QTAC Assessment of Qualifications Manual and QTAC Assessor Guidelines.
Adjustment factors may help you get into the program of your choice by increasing your entrance rank.The additional points don't apply to all applicants or all programs. Please read the information aboutUSQ's Adjustment Factors carefully to find out what you may be eligible for.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081220© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Construction (Honours) (BCNH) - BCon(Hons) (2022)
Program fees
Commonwealth supported placeA Commonwealth supported place is where the Australian Government makes a contribution towards the costof a students' higher education and students pay a student contribution amount, which varies depending onthe courses undertaken. Students are able to calculate the fees for a particular course via the Course FeeSchedules.
Commonwealth Supported students may be eligible to defer their fees through a Government loan calledHECS-HELP.
Domestic full fee paying placeDomestic full fee paying places are funded entirely through the full fees paid by the student. Full fees varydepending on the courses that are taken. Students are able to calculate the fees for a particular course via theCourse Fee Schedule
Domestic full fee paying students may be eligible to defer their fees through a Government loan called FEE-HELP provided they meet the residency and citizenship requirements.
Australian citizens, Permanent Humanitarian Visa holders, Permanent Resident visa holders and New Zealandcitizens who will be resident outside Australia for the duration of their program pay full tuition fees and arenot eligible for FEE-Help.
International full fee paying placeInternational students pay full fees. Full fees vary depending on the courses that are taken and whether theyare studied on-campus, via distance education/online. Students are able to calculate the fees for a particularcourse via the Course Fee Schedules.
Program structureThe Bachelor of Construction (Honours) is a 32 unit program consisting of Academic courses and Practicecourses comprising a core major study component and a minor study. The Bachelor of Construction (Honours)comprises either four years of full-time study or eight years of part-time study.
The components of the program are shown in the following table:
Practice CoursesAcademic CoursesProgramComponent UnitsNumber of CoursesUnitsNumber of Courses
062828Core Major Study
44Minor Study
063232Total
Required time limitsStudents have a maximum of 10 years to complete this program.
Core coursesThe courses that comprise the core major study program are listed in the following table:
UnitsCoursesAcademic Courses
1ENG1002 Introduction to Engineering and Built Environment Applications
1ENM1500 Introductory Engineering Mathematics
1CMG1001 Introduction to Construction Management and the Built Environment
1CIV1500 Applied Mechanics
1ENG1100 Introduction to Engineering Design
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081221© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Construction (Honours) (BCNH) - BCon(Hons) (2022)
1ENG1003 Problem Solving in Engineering and the Built Environment
1CMG1002 Residential Construction: Methods, Materials and Management
1CMG2001 Job Organisation
1ENG2002 Technology, Sustainability and Society
1FIN1101 Introduction to Corporate Finance
1SVY1500 Spatial Science for Engineers
1LAW1500 Introduction to Business and Company Law
1ACC1101 Accounting for Decision-Making
1CIV2605 Construction Engineering
1CMG2003 Construction Production Management
1ENG3003 Engineering Management
1CMG3002 Contract Administration
1CMG2002 Cost Management: Estimating, Measurement and Cost Control
1CMG3001 Building and Construction Procurement
1MGT3203 Project Management Processes
1MGT2007 Leadership
1CMG4003 Commercial Construction
1LAW3473 Construction Law
1CMG4002 Integrated Construction Management
1MGT3006 Employment Relations
1ENG4110 Engineering Research Methodology
1ENG4111 Research Project Part 1
1ENG4112 Research Project Part 2
Practice Courses0ENG1901 Engineering Practice 1
0CIV3906 Civil Materials Practice
0CMG4901 Construction Management Practice
0ENG3902 Professional Practice 1
0ENG4903 Professional Practice 2
0ENG4909 Work Experience - Professional
Major studiesThe Bachelor of Construction (Honours) consists of a core major study component (Construction Management)and minor study. The major study provides students with knowledge and skills in a specific discipline.
Minor StudiesThe Bachelor of Construction (Honours) consists of a core major study component and a minor study. Theminor study provides students with knowledge and skills in a specific area or specialisation. A minor studyin a program is a group of four units of courses that provides students an appropriate breadth of study in anarea of specialisation. Students must complete four (4) units from the minors listed below. The minor studiesavailable are:
● Building● Civil● Transdisciplinary.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081222© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Construction (Honours) (BCNH) - BCon(Hons) (2022)
Practical experienceTo be eligible to graduate from the Bachelor of Construction (Honours), students must obtain an aggregateof at least 60 days of suitable work experience in an architectural, engineering or construction organisation.Students are required to enrol in ENG4909 Work Experience - Professional in the latter part of the programand maintain a record of their practical experience as specified by the Course Specification. The record ofwork experience must be made available for perusal by the Faculty of Health, Engineering and Sciences uponrequest. Work experience is to be certified by an appropriate person in the organisation that is providing theworkplace experience and to be submitted to the examiner. The student must meet all costs associated withthe acquisition of work experience to satisfy this requirement.
Credit or exemptions for ENG4909 Work Experience - Professional will not normally be considered.
IT requirementsStudents should refer to the USQ minimum computing standards to check that their computers are capable ofrunning the appropriate software and versions of Internet web browsers and to check the minimum andrecommended standards for software.Specialist software is required for some courses.
Residential schoolsThe attendance requirement of residential schools within this degree is indicated by the following letters: R= Recommended; HR = Highly Recommended; M = Mandatory. To find out more about residential schools,visit the Residential School Schedule to view specific dates for your degree, or visit the Policy and ProcedureLibrary.
Students are required to undertake practical and professional activities relevant to their program throughenrolment in a series of Practice courses in the program. Practice courses are zero unit courses that may beundertaken in either on-campus or external mode and the final grades available are Pass (P)/Fail (F) only.They are a compulsory part of the program and do not attract a student contribution charge for Australianresidents or a tuition fee for international students. The recommended enrolment schedule for Practice coursesis shown in the Recommended Enrolment Pattern for the program in this Handbook.
External students must attend a number of residential schools during their program to obtain experience inpractical and professional activities appropriate to the program. The residential schools are included in Practicecourses which are conducted in Semester 3 or during the recess periods. The dates for each residential schoolPractice course are shown in the Residential School Schedule in this Handbook and external students shouldensure they are able to attend the residential school prior to enrolling in a Practice course. Personal protectiveequipment is compulsory in many engineering, construction and spatial science laboratories, students shouldconfirm the requirements before attending residential schools for Practice courses.
Students who enrol in on-campus mode for Practice courses normally undertake a series of weekly activitiesand/or attend a compulsory residential school.
ENG3902 Professional Practice 1 and ENG4110 Engineering Research Methodology are to be studied in thestudent's penultimate year. Upon completion of ENG3902 Professional Practice 1, students must studyENG4111 Research Project Part 1, ENG4112 Research Project Part 2 and ENG4903 Professional Practice 2in the same academic year.
Exit pointsStudents who, for whatever reason, are unable to complete the Bachelor of Construction (Honours) and whosatisfy the requirements of the Associate Degree of Construction or the Diploma of Engineering Studies maybe permitted to exit with that award.
CreditExemptions/credit will be assessed based on the USQ Credit and Exemption Procedure.
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081223© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Construction (Honours) (BCNH) - BCon(Hons) (2022)
Work Experience
Work and industrial experience that has not been formally assessed, does not normally qualify for coursecredit in the Bachelor of Construction (Honours) program. Existing work experience may be used to satisfythe practical/work experience requirements when completing the ENG4909 Work Experience - Professionalpractice course.
HonoursThe level of honours awarded will be determined based on the USQ procedure. Please refer to the Class ofHonours Standard Schedule.
Other informationENG1901 Engineering Practice 1 is the first in a series of Practice courses designed to enable students toacquire professional practice skills, including practical and teamwork skills, problem solving and judgement.It is designed principally to cater for the needs of recent school leavers and those lacking any significantexperience of the workforce. Students who have a trade certificate and who have been employed inindustry for some time may be able to claim credit from the course.
Construction Management Major recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should consult the coursespecification to ascertain if a course is offered in another term.
Major study: Construction Management (Major Study Code: 17530)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1111CMG1001 Introduction to Construction Management and
the Built Environment<
1,2111ENM1500 Introductory Engineering MathematicsPre-requisite or Co-requisite:ENM1500 or ENG1500 orMAT1500 or ENM1600
1,3211CIV1500 Applied Mechanics
1,2211ENG1003 Problem Solving in Engineering and the BuiltEnvironment
Pre-requisite: CMG10012221CMG1002 Residential Construction: Methods, Materials
and Management<
2121SVY1500 Spatial Science for Engineers1,2121ENG1100 Introduction to Engineering Design1,2221ENG1002 Introduction to Engineering and Built
Environment Applications
Practice Courses Year 1
M2,3211ENG1901 Engineering Practice 1
Academic Courses Year 2
Pre-requisite: Students enrolled in one of the following
1,2,3312LAW1500 Introduction to Business and Company Law
Programs: LLBP or BLAW orBABL or BALW or BBBL or
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081224© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Construction (Honours) (BCNH) - BCon(Hons) (2022)
Major study: Construction Management (Major Study Code: 17530)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
BBLA or BCLA or BCLW arenot eligible for enrolment Enrolment is not permitted inLAW1500 if LAW1101 hasbeen previously completed
1,2,3412ACC1101 Accounting for Decision-Making1412CIV2605 Construction Engineering13MGT2007 Leadership2322CMG2001 Job Organisation
Pre-requisite: CMG10022322CMG2003 Construction Production Management<
1,2,3422ENG2002 Technology, Sustainability and Society2422Minor study (Select from the Minor list
Practice Courses Year 2
Pre-requisite: MEC1201 andENG1901 or Students must
M3412CIV3906 Civil Materials Practice
be enrolled in one of the following programs: ADCN orBCON or BCNH
Academic Courses Year 3
Pre-requisite: CMG1001 andENG1100
1513CMG2002 Cost Management: Estimating, Measurement
and Cost Control<
Pre-requisite: LAW1101 orLAW1500
1613CMG3002 Contract Administration<
1513Minor study (Select from the Minor List)1,3613ENG3003 Engineering Management¥
Pre-requisite: CMG1001 andCMG2001
2623CMG3001 Building and Construction Procurement<
2523FIN1101 Introduction to Corporate Finance*
2723ENG4110 Engineering Research MethodologyEnrolment is not permitted inMGT3203 if MGT2203 hasbeen previously completed.
2,3623MGT3203 Project Management Processes
Practice Courses Year 3
Pre-requisite: Students mustbe enrolled in one of the fol
M27ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENS
1,2,36ENG4909 Work Experience - Professional
Academic Courses Year 4
1714Minor study (Select from Minor list)Pre-requisite: CMG2003 andCMG3001 or Students must
1CMG4003 Commercial Construction
be enrolled in the followingProgram: GCENPre-requisite: ENG3902 andENG4110 and Students must
1814ENG4111 Research Project Part 1~#
be enrolled in one of the fol
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081225© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Construction (Honours) (BCNH) - BCon(Hons) (2022)
Major study: Construction Management (Major Study Code: 17530)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENHPre-requisite: LAW1101 orLAW1500 or ((LAW1111 and
1814LAW3473 Construction Law
LAW1112 and LAW1113) or(LAW1201 and LAW2201))or ((LAW51111 andLAW5112 and LAW5113) or(LAW5501 and LAW5601))Enrolment is not permitted inMGT3006 if MGT2006 hasbeen previously completed.
2824MGT3006 Employment Relations
Pre-requisite: CMG2003 andCMG3002
27CMG4002 Integrated Construction Management
Pre-requisite: ENG4111 andStudents must be enrolled in
2824ENG4112 Research Project Part 2~##
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH
2624Minor study (Select from the Minor List)
Practice courses Year 4
Pre-requisite: ENG3902 andStudents must be enrolled in
M2814ENG4903 Professional Practice 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.Pre-requisite: CMG4001 orCMG4003
M27CMG4901 Construction Management Practice^
FootnotesOn-campus mode no longer available in Toowoomba.<the Semester 3 offering of this course is available in odd-numbered years only.¥The on-campus Toowoomba offering is only available in Semester 1.*It is recommended that these courses are undertaken in the same academic year.~It is recommended that students should have completed ENG3902 Professional Practice 1 prior to undertaking this course#It is recommended that students should also be enrolled in ENG4903 Professional Practice 2 while undertaking this course.##Residential School will be held at Springfield campus.^
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081226© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Construction (Honours) (BCNH) - BCon(Hons) (2022)
Building Minor recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Enrolment requirementsYear of program and semester in which courseis normally studied
Course
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Students undertaking a Building minor should choose four (4) courses as per the following table, subjectto any requisite requirements:
22CIV2502 Structural and Building TechnologyPre-requisite: CMG1001 and CIV2502 or Students must be enrolled in the followingProgram: MEPR
1CMG3003 Building Services: Methods, Materials andManagement
Plus any two courses from the following list:
11URP1001 Introduction to Urban and Regional Planning22URP3201 Sustainable Urban Design and Development11URP2001 Planning Structures and Statutory Planning*
22URP2002 Local Government Planning Practice and
Technology*
1,31MGT2001 Risk Mitigation, Work Health and Safety
FootnotesUnavailable in on-campus mode in 2022*
Civil Minor recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Enrolment requirementsYear of program and semester in which courseis normally studied
Course
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Students undertaking a Civil minor should choose four (4) courses as per the following table, subjectto any requisite requirements:
Pre-requisite: MAT1500 or ENG1500 orENM1500 or ENM1600 or Students must be
11CIV2701 Road Design and Location
enrolled in one of the following Programs:GCST or GDST or GCEN or GEPR
2CIV3603 Construction Methods
Plus any two courses from the following list:
22CIV3703 Transport EngineeringPre-requisite: CIV1501 or CIV1500 or Students must be enrolled in one of the following Programs: MENS or GCEN or GEPR
22CIV2403 Geology and Geomechanics
Pre-requisite: CIV2401 or CIV2403 or Students must be enrolled in one of the follow
22CIV3403 Geotechnical Engineering
ing Programs: GCEN or METC or MEPR orGCNS or GDNS or MENSPre-requisite: ENM1600 or (ENM1500 andCIV1500) or Students must be enrolled in
2,32CIV1501 Engineering Statics
one of the following Programs: MEPR or GCEN or GEPRPre-requisite: (ENG1100 and MEC2402) or(ENG1100 and CIV1501 for students en
22CIV2503 Structural Design I
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081227© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Construction (Honours) (BCNH) - BCon(Hons) (2022)
Enrolment requirementsYear of program and semester in which courseis normally studied
Course
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
rolled in one of the following: BETC Infrastructure Management major or BENS Infrastructure Management Engineering major) orStudents must be enrolled in: GCEN orGEPR
1,2,31MEC1201 Engineering MaterialsPre-requisite: CIV1501 or Students must beenrolled in one of the following Programs:
11MEC2402 Stress Analysis
GCEN or METC or MEPR or GCNS orGDNS or MENS or GEPR
1,21,2ENM1600 Engineering Mathematics22ENV3105 Hydrology
Pre-requisite: CIV1500 or CIV1501 or Students must be enrolled in the following Program: GCEN or GEPR
11ENV2103 Hydraulics I
Transdisciplinary Minor recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Enrolment requirementsYear of program and semester in which courseis normally studied
Course
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Students undertaking a Transdisciplinary minor should choose four (4) courses from the other twominors, subject to any requisite requirements:
Choose any four (4) courses from the other two minors:
22Choose a course from the other two minors11Choose a course from the other two minors11Choose a course from the other two minors22Choose a course from the other two minors
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081228© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Construction (Honours) (BCNH) - BCon(Hons) (2022)
Bachelor of Engineering (Honours) (BENH) - BEng(Hons)QTAC code (Australian and New Zealand applicants): Toowoomba campus: 907331; External: 907335;Springfield campus: 927331
CRICOS code (International applicants): 079519E
ExternalOn-campus^#
Semester 1 (February)Semester 2 (July)
Semester 1 (February)Semester 2 (July)
Start:
-Springfield, ToowoombaCampus:
Commonwealth supported placeCommonwealth supported placeFees:Domestic full fee paying placeDomestic full fee paying placeInternational full fee paying placeInternational full fee paying place
4 years full-time, 8 years part-timeStandard duration:
From: Associate Degree of Engineering; Bachelor of Engineering ScienceProgramarticulation:
FootnotesThe only majors available on-campus at USQ Springfield are Civil Engineering, Electrical and Electronic Engineering, Mechanical Engineeringand Mechatronic Engineering.
^
The Instrumentation Control and Automation Engineering major is only available via external study.#
Contact us
Current studentsFuture International studentsFuture Australian and NewZealand students
Ask a questionFreecall (within Australia): 1800007 252Phone (from outside Australia): +617 4631 2285Email [email protected]
Ask a questionPhone: +61 7 4631 5543Email: [email protected]
Ask a questionFreecall (within Australia): 1800269 500Phone (from outside Australia): +617 4631 5315Email: [email protected]
Professional accreditationA graduate of this program is eligible to apply for membership of Engineers Australia as a graduate ProfessionalEngineer. After further professional development, a graduate member with a Bachelor of Engineering (Honours)may apply for chartered status as a Professional Engineer and, when granted, may use the post-nominalMIEAust CPEng.
The Bachelor of Engineering (Honours) program is accredited by Engineers Australia and, through an agreementreached between the professional engineering bodies of other countries (the Washington Accord), is alsorecognised in those countries that are signatories to the Washington Accord.
Program aimsThe Bachelor of Engineering (Honours) provides students with the knowledge and skills that are necessaryto commence practice as a professional engineer; be eligible for graduate membership of Engineers Australia(as a Professional Engineer) and other appropriate professional bodies; and to undertake further advancedlevel studies in engineering. Specifically the program provides students with a core of basic generic andtechnical skills, common to all branches of engineering, and then permits students to undertake an in depthstudy of either agricultural, civil, computer systems, electrical and electronic, environmental, instrumentationcontrol and automation, mechanical, mechatronic or power engineering. In addition, students are equipped
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081229© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
with a knowledge of the industrial and social environments in which they will function as professional engineers.The program also seeks to instil in students a capacity to communicate effectively and adapt to change.
The Bachelor of Engineering (Honours) is primarily vocationally oriented. However, the program has beendesigned to identify students who have the capacity to undertake further study at an advanced level and tomake an original contribution to engineering knowledge.
Program objectivesOn completion of this program, students should be able to:
● Display coherent and comprehensive knowledge of historical, contemporary and emerging theories andconcepts that underpin relevant engineering disciplines.
● Recognise the social purpose of engineering and analyse the relationship between human-made productsand systems, and community needs.
● Apply well-researched, innovative, industry-relevant systems approaches to solve a range of engineeringproblems, and to address issues of sustainable practice in diverse environmental, technical and socialcontexts.
● Apply relevant project management skills and formulate design processes to enable the delivery ofengineering projects within given project constraints.
● Make appropriate autonomous judgements by critically evaluating evidence, identifying and analysingethical issues and applying cultural competencies, including those relevant to indigenous peoples.
● Communicate effectively in English and interpret information for diverse audiences using a range ofhigh-level oral, written and technology-based approaches; and apply effective competencies as a leader,team member and individual within the professional domain.
● Engage in lifelong learning through critical reflection, and be accountable for their personal and professionalactions by managing and monitoring personal performance.
Australian Qualifications FrameworkThe Australian Qualifications Framework (AQF) is a single national, comprehensive system of qualificationsoffered by higher education institutions (including universities), vocational education and training institutionsand secondary schools. Each AQF qualification has a set of descriptors which define the type and complexityof knowledge, skills and application of knowledge and skills that a graduate who has been awarded thatqualification has attained, and the typical volume of learning associated with that qualification type.
This program is at AQF Qualification Level 08. Graduates at this level will have advanced knowledge andskills for professional or highly skilled work and/or further learning.
The full set of levels criteria and qualification type descriptors can be found by visiting www.aqf.edu.au.
Program Information SetView USQ’s admission criteria, student profiles and a summary of all offers made under Course AdmissionInformation Set via the QTAC website.
Admission requirementsTo be eligible for admission, applicants must satisfy the following requirements:
● Have achieved a minimum Australian Tertiary Admission Rank (ATAR) of 74.15, or equivalentqualification.^
● Subject Pre-requisites: English (Units 3 & 4, C) and Mathematical Methods (Units 3 & 4, C) or equivalent.● English Language Proficiency requirements for Category 2.
Applicants are advised to also address the following:
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081230© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
● Recommended Prior Study: Physics (Units 3 & 4, C) or equivalent.
All students are required to satisfy the applicable English language requirements.
If students do not meet the English language requirements they may apply to study a University-approvedEnglish language program. On successful completion of the English language program, students may beadmitted to an award program.
These are determined by the University for specific programs each Semester. The 2021 ATAR andtertiary entrance ranks are based on agreed QTAC schedules which assess formal study at Year 12 or
^
equivalent level, tertiary, preparatory, professional or vocational qualifications or work experience, asdetailed in the QTAC Assessment of Qualifications Manual and QTAC Assessor Guidelines.
Adjustment factors may help you get into the program of your choice by increasing your entrance rank.The additional points don't apply to all applicants or all programs. Please read the information aboutUSQ's Adjustment Factors carefully to find out what you may be eligible for.
Program fees
Commonwealth supported placeA Commonwealth supported place is where the Australian Government makes a contribution towards the costof a students' higher education and students pay a student contribution amount, which varies depending onthe courses undertaken. Students are able to calculate the fees for a particular course via the Course FeeSchedules.
Commonwealth Supported students may be eligible to defer their fees through a Government loan calledHECS-HELP.
Domestic full fee paying placeDomestic full fee paying places are funded entirely through the full fees paid by the student. Full fees varydepending on the courses that are taken. Students are able to calculate the fees for a particular course via theCourse Fee Schedule
Domestic full fee paying students may be eligible to defer their fees through a Government loan called FEE-HELP provided they meet the residency and citizenship requirements.
Australian citizens, Permanent Humanitarian Visa holders, Permanent Resident visa holders and New Zealandcitizens who will be resident outside Australia for the duration of their program pay full tuition fees and arenot eligible for FEE-Help.
International full fee paying placeInternational students pay full fees. Full fees vary depending on the courses that are taken and whether theyare studied on-campus, via distance education/online. Students are able to calculate the fees for a particularcourse via the Course Fee Schedules.
Program structureThe Bachelor of Engineering (Honours) is a 32-unit program consisting of Academic Courses and PracticeCourses. Students undertake a major of study, including approved courses which students are able to select.Students may choose to substitute four approved courses for a minor of four units in another area of study totheir major (except for Mechanical Engineering and Mechatronic Engineering). The available minors andassociated courses are listed in the minor studies section.
Academic courses are normally one-unit courses and involve approximately 155 hours of student work perunit.
Practice courses are zero unit courses and each involves approximately 50 hours of student work.
The following table shows the mandatory components of the program:
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081231© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Practice CoursesAcademic CoursesProgramComponent UnitsNumber of CoursesUnitsNumber of Courses
041111Core Studies
04-5 depending uponthe major
2121 OR 17+4Major Study(including approvedcourses) OR MajorStudy plus MinorStudy
08–93232Total
Minor Studies
A minor study is a coherent group of four units of courses that provides students with an additional breadthof study in their program. Students who wish to take a minor study before undertaking any course shouldensure any pre-requisite courses are completed or exempted, enrolment requirements must be satisfied forany course selected.
Minor Study availableMajor study
YesAgricultural Engineering
YesCivil Engineering
YesComputer Systems Engineering
YesElectrical and Electronic Engineering
YesEnvironmental Engineering
YesInstrumentation Control and Automation Engineering
NoMechanical Engineering
NoMechatronic Engineering
YesPower Engineering
When students select a minor, courses will only count towards that minor if they have not already countedtowards another selected major. Not all minors are available on-campus at all campuses. Students undertakinga Minor study may choose courses from those listed in this section of the Handbook as follows:
Enrolmentrequirements
Online (ONL)External (EXT)Springfield(ONC)
Toowoomba(ONC)
Major: AllexceptMechanical orMechatronic
Minor Study – Management. Select the following course:
S2, S3S2S2, S3ENG4004EngineeringProject andOperationsManagement
select 3 other courses from the following list:
S1S1S1MGT2001 RiskMitigation, WorkHealth and Safety
S1MGT2007Leadership
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081232© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
S2MGT3004Creativity,Innovation andEntrepreneurship
S1S1S1MGT3005WorkforceDesign
S2, S3S2S2MGT3203 ProjectManagementProcesses
Enrolmentrequirements
Online (ONL)External (EXT)Springfield(ONC)
Toowoomba(ONC)
Major:AgriculturalEngineering
Minor study: Mechanical Engineering (select 4 courses from the following list):
S1S1S1MEC2202ManufacturingProcesses
S2S2S2MEC2406Introduction toMechatronics andAutomation
S1S1MEC3203MaterialsTechnology
S2S2MEC3303Mechanical andMechatronicSystem Design
S2S2MEC4406Robotics andMachine Vision
Enrolmentrequirements
Online (ONL)External (EXT)Springfield(ONC)
Toowoomba(ONC)
Major: CivilEngineering
Minor study: Mining Engineering (select 4 courses from the following list):
S1MIN2001 MiningTechnology andMineralProcessing
S2MIN2002 MinePlanning andDesign
S2MIN2003 MineOperations andManagement
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081233© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
S1S2
MINADapproved coursetaken throughCentralQueenslandUniversity (CQU)viacross-institutionalenrolment.ENAR12004MineManagement andSafetyORENAR11001ResourceGeology
Enrolmentrequirements
Online (ONL)External (EXT)Springfield(ONC)
Toowoomba(ONC)
Major: CivilEngineering
Minor study: Transport Engineering (select the following 3 courses):
S2CIV5704 Roadand StreetEngineering
S1CIV5705Pavement Designand Analysis
S2S2URP4001MovementNetwork
Planning*
Select 1 of the following courses:
S2CIV3603ConstructionMethods
S1S1S1ENV2201 LandStudies
FootnotesUnavailable in on-campus mode in 2022*
Enrolmentrequirements
Online (ONL)External (EXT)Springfield(ONC)
Toowoomba(ONC)
Majors:Agricultural orEnvironmentalEngineering
Minor study: Climatology (select the following 4 courses):
S1S1CLI1110 Weatherand Climate
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081234© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
S2S2CLI2201 ClimateChange andVariability
S1S1CLI3301 Climateand EnvironmentRisk Assessment
S2S2CLI3302Adaptation toClimate Change
Enrolmentrequirements
Online (ONL)External (EXT)Springfield(ONC)
Toowoomba(ONC)
Majors:Environmentalor PowerEngineering
Minor study: Geographic Information Systems (select 4 courses from the following list):
S1, S3S11S1GIS1402GeographicInformationSystems
S2S2GIS3405 SpatialAnalysis andModelling
S2S2GIS3406 RemoteSensing andImage Processing
S1, S2, S3S1, S2S1, S2CSC1401FoundationProgramming
S1S1GIS3407 GISProgramming andVisualisation
Enrolmentrequirements
Online (ONL)External (EXT)Springfield(ONC)
Toowoomba(ONC)
Major: AllexceptMechanical orMechatronic
Minor Study – Data Management (Select 4 courses from the following list):
S2S2CIS3010 OracleDevelopment
S1, S2, S3S1, S2S1, S2CSC1401FoundationProgramming
S1,S3S1S1CSC3400Database Systems
S2S2CSC3501Principles of DataScience and
Visualisation*
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081235© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
S2S2CSC3502Principles of BigData
Management*
FootnotesStudents are able to use ENG3104 Engineering Simulations and Computations to satisfy the Requisite Knowledge requirements of this course.*
Required time limitsStudents have a maximum of 10 years to complete this program.
Core coursesThe courses that comprise the core studies program are shown in the following table:
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
1,21,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,211ENG1004 Engineering Problem Solving Principles
1,21,21,2ENG1100 Introduction to Engineering Design
1,2,31.21,2ENG2002 Technology, Sustainability and Society
1,311ENG3003 Engineering Management†
222ENG3104 Engineering Simulations and Computations
222ENG4110 Engineering Research Methodology
111ENG4111 Research Project Part 1
1,221,2ENG4112 Research Project Part 2
1,21,21,2ENM1600 Engineering Mathematics
111ENM2600 Advanced Engineering Mathematics
Practice Courses
2,311,2ENG1901 Engineering Practice 1
2ENG3902 Professional Practice 1
21ENG4903 Professional Practice 2
1,2,3ENG4909 Work Experience - Professional
FootnotesThe Semester 3 offering of this course is offered in odd numbered years only.†
Major studiesThe Bachelor of Engineering (Honours) consists of a core component and a series of major studies. All studentsmust complete the core courses and one of the major studies. The major study provides students with knowledgeand skills in a specific discipline. The major study areas in the USQ Bachelor of Engineering (Honours) arelisted below. The Instrumentation Control and Automation Engineering major is designed for processtechnologists in industry who wish to upgrade their qualifications. As such, the program will normally beundertaken by external study.
ExternalOn-Campus SpringfieldOn-Campus ToowoombaMajor
YesNoYesAgricultural Engineering
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081236© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
YesYesYesCivil Engineering
YesNoYesComputer SystemsEngineering
YesYesYesElectrical and ElectronicEngineering
YesNoYesEnvironmentalEngineering
YesNoNoInstrumentation Controland AutomationEngineering
YesYesYesMechanical Engineering
YesYesYesMechatronic Engineering
YesNoYesPower Engineering
Agricultural Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
22AGR2301 Agricultural Science
11AGR2302 Agricultural Machinery
11AGR3303 Agricultural Materials and Post-HarvestTechnologies
11AGR3304 Soil Science
22AGR3305 Precision and Smart Technologies inAgriculture
11AGR4305 Agricultural Soil Mechanics
2,322CIV1501 Engineering Statics
222CIV2403 Geology and Geomechanics
111ENV2103 Hydraulics I
111ENV3104 Hydraulics II
222ENV3105 Hydrology
22ENV4106 Irrigation Science
1,2,31,21,2MEC1201 Engineering Materials
222MEC2301 Design of Machine Elements
111MEC2401 Dynamics I
111MEC2402 Stress Analysis
222SVY1500 Spatial Science for Engineers
Approved courses (x4)
Practice Courses
3AGR2902 Field Practice
2AGR3903 Soil and Water Engineering Practice 2
3AGR3905 Agricultural Engineering Practice
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081237© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
2,322CIV2901 Geology and Geomechanics Practice
1,2,322ENV2902 Hydraulics Practice
Civil Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
2,322CIV1501 Engineering Statics
222CIV2403 Geology and Geomechanics
222CIV2503 Structural Design I
111CIV2605 Construction Engineering
222CIV3403 Geotechnical Engineering
111CIV3505 Structural Analysis
111CIV3506 Concrete Structures
222CIV3703 Transport Engineering
111CIV4508 Structural Design II
111ENV2103 Hydraulics I
111ENV3104 Hydraulics II
222ENV3105 Hydrology
222ENV4203 Public Health Engineering
1,2,31,21,2MEC1201 Engineering Materials
111MEC2402 Stress Analysis
222SVY1500 Spatial Science for Engineers
Approved course (x5)
Practice Courses
2,322CIV2901 Geology and Geomechanics Practice
311CIV3906 Civil Materials Practice
3CIV3907 Civil Systems Practice
1,2CIV4908 Civil Design Practice
1,2,322ENV2902 Hydraulics Practice
Computer Systems Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
1,2,31,21,2CSC1401 Foundation Programming
22CSC2401 Algorithms and Data Structures
11CSC2402 Object-Oriented Programming in C++
1,21,21,2CSC2408 Software Development Tools
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081238© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
111ELE1301 Computer Engineering
111ELE1502 Electronic Circuits
2,322ELE1801 Electrical Technology
222ELE2103 Linear Systems and Control
111ELE2303 Embedded Systems Design
111ELE2601 Telecommunications Principles
111ELE3105 Computer Controlled Systems
222ELE3107 Signal Processing
111ELE3305 Computer Systems and CommunicationsProtocols
222ELE3307 Real Time Systems
111MAT1101 Discrete Mathematics for Computing
Approved Courses (x6)
Practice Courses
322ELE1911 Electrical and Electronic Practice A
311ELE2912 Electrical and Electronic Practice B
2ELE2913 Electrical and Electronic Practice C
31ELE3914 Electrical and Electronic Practice D
222ELE3915 Electrical and Electronic Practice E
Electrical and Electronic Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
111ELE1301 Computer Engineering
111ELE1502 Electronic Circuits
2,322ELE1801 Electrical Technology
222ELE2103 Linear Systems and Control
111ELE2303 Embedded Systems Design
222ELE2504 Electronic Design and Analysis
111ELE2601 Telecommunications Principles
111ELE3105 Computer Controlled Systems
222ELE3107 Signal Processing
111ELE3305 Computer Systems and CommunicationsProtocols
222ELE3307 Real Time Systems
222ELE3506 Electronic Measurement
111ELE3803 Electrical Plant
111ELE4605 Fields and Waves
222ELE4606 Communication Systems
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081239© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
1,2,31,21,2MEC1201 Engineering Materials
Approved Courses (x5)
Practice Courses
322ELE1911 Electrical and Electronic Practice A
311ELE2912 Electrical and Electronic Practice B
2ELE2913 Electrical and Electronic Practice C
31ELE3914 Electrical and Electronic Practice D
222ELE3915 Electrical and Electronic Practice E
Environmental Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
11AGR3304 Soil Science
2,322CIV1501 Engineering Statics
222CIV2403 Geology and Geomechanics
111ENV2103 Hydraulics I
11ENV2105 Applied Chemistry and Microbiology
111ENV2201 Land Studies
22ENV3103 Environmental Pollution
111ENV3104 Hydraulics II
222ENV3105 Hydrology
22ENV4106 Irrigation Science
22ENV4107 Water Resources Engineering
222ENV4203 Public Health Engineering
11ENV4204 Environmental Technology
1ENV4205 Water and Wastewater Treatment
1,2,31,21,2MEC1201 Engineering Materials
222SVY1500 Spatial Science for Engineers
Approved courses (x5)
Practice Courses
3AGR2902 Field Practice
2AGR3903 Soil and Water Engineering Practice 2
2,322CIV2901 Geology and Geomechanics Practice
1,2,322ENV2902 Hydraulics Practice
3ENV3904 Environmental Engineering Practice
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081240© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Instrumentation Control and Automation Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
111ELE1301 Computer Engineering
111ELE1502 Electronic Circuits
2,322ELE1801 Electrical Technology
222ELE2103 Linear Systems and Control
111ELE2303 Embedded Systems Design
222ELE2504 Electronic Design and Analysis
111ELE3105 Computer Controlled Systems
222ELE3307 Real Time Systems
222ELE3506 Electronic Measurement
1 (odd yearsonly)
ELE4109 Measurement Science & InstrumentEngineering
1ELE4506 Industrial Process Automation
1,2,31,21,2MEC1201 Engineering Materials
222MEC2106 Introduction to Thermofluids
1MEC2501 Process Control Systems
111MEC3107 Thermofluids
111MEC4108 Advanced Thermofluids
222MEC4406 Robotics and Machine Vision
Approved Courses (x4)
Practice Courses
322ELE1911 Electrical and Electronic Practice A
311ELE2912 Electrical and Electronic Practice B
2ELE2913 Electrical and Electronic Practice C
31ELE3914 Electrical and Electronic Practice D
2MEC3905 Mechatronic Practice
Mechanical Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
222CIV1501 Engineering Statics
2,322ELE1801 Electrical Technology
1,2,31,21,2MEC1201 Engineering Materials
222MEC2106 Introduction to Thermofluids
111MEC2202 Manufacturing Processes
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081241© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
222MEC2301 Design of Machine Elements
222MEC2304 Solid Modelling
111MEC2401 Dynamics I
111MEC2402 Stress Analysis
222MEC2406 Introduction to Mechatronics andAutomation
111MEC3107 Thermofluids
111MEC3203 Materials Technology
222MEC3204 Production Engineering
111MEC3302 Computational Mechanics in Design
222MEC3303 Mechanical and Mechatronic SystemDesign
222MEC3403 Dynamics II
222MEC4104 Renewable Energy Technology
111MEC4108 Advanced Thermofluids
Approved Course (x3)
Practice Courses
311MEC2901 Mechanical Practice 1
111MEC2902 Mechanical Practice 2
32MEC3903 Mechanical Practice 3
22MEC3904 Mechanical Practice 4
Mechatronic Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
222CIV1501 Engineering Statics
111ELE1301 Computer Engineering
111ELE1502 Electronic Circuits
2,322ELE1801 Electrical Technology
222ELE2103 Linear Systems and Control
111ELE2303 Embedded Systems Design
222ELE2504 Electronic Design and Analysis
111ELE3105 Computer Controlled Systems
222ELE3506 Electronic Measurement
1,2,31,21,2MEC1201 Engineering Materials
111MEC2202 Manufacturing Processes
222MEC2301 Design of Machine Elements
222MEC2304 Solid Modelling
111MEC2401 Dynamics I
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081242© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
111MEC2402 Stress Analysis
222MEC2406 Introduction to Mechatronics andAutomation
111MEC3302 Computational Mechanics in Design
222MEC3303 Mechanical and Mechatronic SystemDesign
222MEC3403 Dynamics II
222MEC4406 Robotics and Machine Vision
Approved Course (x1)
Practice Courses
322ELE1911 Electrical and Electronic Practice A
311MEC2901 Mechanical Practice 1
111MEC2902 Mechanical Practice 2
2MEC3905 Mechatronic Practice
Power Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
111ELE1301 Computer Engineering
111ELE1502 Electronic Circuits
2,322ELE1801 Electrical Technology
222ELE2103 Linear Systems and Control
111ELE2303 Embedded Systems Design
222ELE2504 Electronic Design and Analysis
22ELE2704 Electricity Supply Systems
111ELE3105 Computer Controlled Systems
111ELE3305 Computer Systems and CommunicationsProtocols
111ELE3803 Electrical Plant
1ELE3804 Power Systems Protection
222ELE3805 Power Electronics Principles andApplications
11ELE3807 Power Systems Analysis
1,2,31,21,2MEC1201 Engineering Materials
222MEC2106 Introduction to Thermofluids
222MEC4104 Renewable Energy Technology
Approved Courses (x5)
Practice Courses
322ELE1911 Electrical and Electronic Practice A
311ELE2912 Electrical and Electronic Practice B
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081243© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
2ELE2913 Electrical and Electronic Practice C
31ELE3914 Electrical and Electronic Practice D
222ELE3915 Electrical and Electronic Practice E
Electives/Approved coursesAppropriate approved courses in each major are shown in the tables in the Recommended Enrolment Patternsection. The Program Director may approve a variation in approved course studies where the student candemonstrate that there is a sound academic argument for the change. Arguments based on timetable difficulties,quota problems etc. will not normally be entertained. Note however that students who wish to enrol in a courseother than those listed must obtain the written approval of the Program Director prior to enrolling in the courseif they want the course to count as credit towards their award.
Students should note that quota restrictions may preclude their enrolment in particular approved courses asstudents enrolling in these courses as part of their core or major studies will be given enrolment priority.
Practical experienceTo be eligible to graduate from the Bachelor of Engineering (Honours), students must obtain an aggregate ofat least 60 days of suitable work experience during their program. This experience may be in an engineeringoffice or laboratory where the student would be working principally with professional engineers and engineeringassociates. It may, however, be preferable for students to spend some time in field or factory activities to gaininsight into industrial practice and to see what is involved in converting designs into finished products. Studentsare required to enrol in ENG4909 Work Experience - Professional in the latter part of their program and keepa record of appropriate experience as specified in the Course Specification. The work experience is to beendorsed by an appropriate person in the organisation providing the experience and submitted to the examiner.The student must meet all costs associated with the acquisition of work experience to satisfy this requirement.The record of work experience must be made available for perusal by the Faculty of Health, Engineering andSciences upon request. The acceptability or otherwise of employment experience, and the period of that typeof experience that may be credited towards the 60 days, will be determined by the Examiner of ENG4909Work Experience - Professional.
Credit or exemptions for ENG4909 Work Experience - Professional will not normally be considered.
IT requirementsStudents should visit the USQ minimum computing standards to check that their computers are capable ofrunning the appropriate software and versions of Internet web browsers and to check the minimum andrecommended standards for software.
Residential schoolsThe attendance requirement of residential schools within this degree is indicated by the following letters: R= Recommended; HR = Highly Recommended; M = Mandatory. To find out more about residential schools,visit the Residential School Schedule to view specific dates for your degree, or visit the Policy and ProcedureLibrary.
Students are required to undertake practical and professional activities relevant to their program throughenrolment in a series of Practice courses in the program. Practice courses are zero unit courses that may beundertaken in either on-campus or external mode and the final grades available are Pass (P)/Fail (F) only.They are a compulsory part of the program and do not attract a student contribution charge for Australianresidents or a tuition fee for international students. The recommended enrolment schedule for Practice coursesis shown in the Recommended Enrolment Pattern for the program in this Handbook.
External students must attend a number of residential schools during their program to obtain experience inpractical and professional activities appropriate to the program. The residential schools are included in Practicecourses which are conducted in Semester 3 or during the recess periods. The dates for each residential schoolPractice course are shown in the Residential School Schedule in this Handbook and external students should
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081244© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
ensure they are able to attend the residential school prior to enrolling in a Practice course. Personal protectiveequipment is compulsory in many engineering, construction and spatial science laboratories, students shouldconfirm the requirements before attending residential schools for Practice courses.
Students who enrol in on-campus mode for Practice courses normally undertake a series of weekly activitiesand/or attend a compulsory residential school.
ENG3902 Professional Practice 1 and ENG4110 Engineering Research Methodology are to be studied in thestudent's penultimate year. Upon completion of ENG3902 Professional Practice 1 and ENG4110 EngineeringResearch Methodology, students must study ENG4111 Research Project Part 1, ENG4112 Research ProjectPart 2 and ENG4903 Professional Practice 2 in the same academic year.
Agricultural Engineering
● ENG1901 Engineering Practice 1● CIV2901 Geology and Geomechanics Practice● ENV2902 Hydraulics Practice● AGR3903 Soil and Water Engineering Practice 2● AGR3905 Agricultural Engineering Practice● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2
Civil Engineering
● ENG1901 Engineering Practice 1● CIV2901 Geology and Geomechanics Practice● ENV2902 Hydraulics Practice● CIV3906 Civil Materials Practice● CIV3907 Civil Systems Practice● CIV4908 Civil Design Practice● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2
Computer Systems Engineering
● ENG1901 Engineering Practice 1● ELE1911 Electrical and Electronic Practice A● ELE2912 Electrical and Electronic Practice B● ELE2913 Electrical and Electronic Practice C● ELE3914 Electrical and Electronic Practice D● ELE3915 Electrical and Electronic Practice E● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2
Electrical and Electronic Engineering
● ENG1901 Engineering Practice 1● ELE1911 Electrical and Electronic Practice A● ELE2912 Electrical and Electronic Practice B● ELE3914 Electrical and Electronic Practice D● ELE3915 Electrical and Electronic Practice E● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2● CHE1110 Chemistry 1 (Elective)
Environmental Engineering
● ENG1901 Engineering Practice 1
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081245© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
● CIV2901 Geology and Geomechanics Practice● ENV2902 Hydraulics Practice● AGR2902 Field Practice● ENV3904 Environmental Engineering Practice● AGR3903 Soil and Water Engineering Practice 2● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2● CHE1110 Chemistry 1(Elective)● CHE2120 Chemistry 2 (Elective)
Instrumentation Control and Automation Engineering
● ENG1901 Engineering Practice 1● ELE1911 Electrical and Electronic Practice A● ELE2912 Electrical and Electronic Practice B● ELE2913 Electrical and Electronic Practice C● ELE3914 Electrical and Electronic Practice D● MEC3905 Mechatronic Practice● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2● CHE1110 Chemistry 1 (Elective)
Mechanical Engineering
● ENG1901 Engineering Practice 1● MEC2901 Mechanical Practice 1● MEC2902 Mechanical Practice 2● MEC3903 Mechanical Practice 3● MEC3904 Mechanical Practice 4● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2
Mechatronic Engineering
● ENG1901 Engineering Practice 1● ELE1911 Electrical and Electronic Practice A● MEC2901 Mechanical Practice 1● MEC2902 Mechanical Practice 2● MEC3905 Mechatronic Practice● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2
Power Engineering
● ENG1901 Engineering Practice 1● ELE1911 Electrical and Electronic Practice A● ELE2912 Electrical and Electronic Practice B● ELE2913 Electrical and Electronic Practice C● ELE3914 Electrical and Electronic Practice D● ELE3915 Electrical and Electronic Practice E● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2● CHE1110 Chemistry 1 (Elective)
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081246© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Related programsStudents may combine the Bachelor of Engineering (Honours) with a program from another area of study.Currently the following combined programs have been accredited by the University and Engineers Australia:
● Bachelor of Engineering (Honours) Bachelor of Business● Bachelor of Engineering (Honours) Bachelor of Information Technology● Bachelor of Engineering (Honours) Bachelor of Science.
Exit pointsStudents who, for whatever reason, are unable to complete the Bachelor of Engineering (Honours) and whosatisfy all of the requirements of either the Bachelor of Engineering Science, the Associate Degree of Engineering or the Diploma of Engineering Studies may be permitted to exit with that award.
CreditExemptions/credit will be assessed based on the USQ Credit and Exemption Procedure.
Work Experience
Work and industrial experience that has not been formally assessed, does not normally qualify for coursecredit in the Bachelor of Engineering (Honours) program. Existing work experience may be used to satisfythe practical/work experience requirements when completing the ENG4909 Work Experience - Professionalpractice course.
HonoursThe level of honours awarded will be determined based on the USQ procedure. Please refer to the Class ofHonours Standard Schedule.
Agricultural Engineering major full-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should click on the courselink in the table below to ascertain if a course is offered in another term.
Major study: Agricultural Engineering (Major Study Code: 16922)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,211ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,211ENM1600 Engineering Mathematics1,211ENG1004 Engineering Problem Solving Principles1,2,311MEC1201 Engineering Materials1,221ENG1100 Introduction to Engineering Design
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,321CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
1,2,321ENG2002 Technology, Sustainability and Society221SVY1500 Spatial Science for Engineers
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081247© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Agricultural Engineering (Major Study Code: 16922)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Practice Courses Year 1
M2,311,21ENG1901 Engineering Practice 1
Academic Courses Year 2
112AGR2302 Agricultural MachineryPre-requisite: ENM1600 orStudents must be enrolled in
112ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCNPre-requisite: CIV1500 orCIV1501 or Students must be
112ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPRPre-requisite: CIV1501 or Students must be enrolled in
112MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
222ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENS
222AGR2301 Agricultural SciencePre-requisite: CIV1501 orCIV1500 or Students must be
222CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPRPre-requisite: (MEC2402 andENG1100) or Students must
222MEC2301 Design of Machine Elements
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
Practice Courses Year 2
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,322CIV2901 Geology and Geomechanics Practice
Pre-requisite or Co-requisite:ENV2103 or ENV1101
M1,2,322ENV2902 Hydraulics Practice
M3AGR2902 Field Practice^
Academic Courses Year 3
113AGR3303 Agricultural Materials and Post-HarvestTechnologies
113AGR3304 Soil SciencePre-requisite: ENV1101 orENV2103 or Students must
113ENV3104 Hydraulics II
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081248© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Agricultural Engineering (Major Study Code: 16922)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
113MEC2401 Dynamics I
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENS or GEPR
223AGR3305 Precision and Smart Technologies in Agriculture223Approved Course (Select from minor or approved course
list)223ENV3105 Hydrology223ENG4110 Engineering Research Methodology
Practice Courses Year 3
M2AGR3903 Soil and Water Engineering Practice 2M3AGR3905 Agricultural Engineering Practice
Pre-requisite: Students mustbe enrolled in one of the fol
M2ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENS
Academic Courses Year 4
1,314ENG3003 Engineering Management†
114AGR4305 Agricultural Soil MechanicsPre-requisite: ENG3902 andENG4110 and Students must
114ENG4111 Research Project Part 1
be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH
114Approved Course (Select from minor or approved courselist)
Pre-requisite: AGR3304 orStudents must be enrolled in
224ENV4106 Irrigation Science
one of the following Programs: GCEN or GCSC or GDSIor METC or MEPR or GCNSor GDNS orMENS orMSCN.
224Approved Course (Select from minor or approved courselist)
Pre-requisite: ENG4111 andStudents must be enrolled in
224ENG4112 Research Project Part 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH
224Approved Course (Select from minor or approved courselist)
Practice Courses Year 4
Pre-requisite: ENG3902 andStudents must be enrolled in
M214ENG4903 Professional Practice 2
one of the following Program
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081249© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Agricultural Engineering (Major Study Code: 16922)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
s: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.
1,2,3ENG4909 Work Experience - Professional
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Director
Pre-requisite: CIV2401 orCIV2403 or Students must be
22CIV3403 Geotechnical Engineering
enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
11ELE1301 Computer Engineering32ELE2103 Linear Systems and Control2,32ENG4004 Engineering Project and Operations
Management‡
Pre-requisite: MEC2401 orELE2103 or Students must
22MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCEN
11ENV2201 Land StudiesPre-requisite: (ENV3104 andENV3105) or Students must
22ENV4107 Water Resources Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENV1101 orENV2103 or Students must
22ENV4203 Public Health Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology@
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS
1,31GIS1402 Geographic Information SystemsPre-requisite: MEC1201 orStudents must be enrolled in
11MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCEN
22MEC2406 Introduction to Mechatronics and AutomationPre-requisite: MEC1201 orStudents must be enrolled in
11MEC3203 Materials Technology
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENS
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081250© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Agricultural Engineering (Major Study Code: 16922)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
2CLI2201 Climate Change and VariabilityPre-requisite: MEC2301 orStudents must be enrolled in
22MEC3303 Mechanical and Mechatronic System Design
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENSEnrolment is not permitted inREN1201 if REN8101 hasbeen previously completed.
11REN1201 Environmental Studies*
FootnotesThe residential school for this course may involve overnight field trips for which each student will be responsible for their own accommodationcosts.
^
The semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡Students who wish to enrol in ENV4204 Environmental Technology as an Approved course, should consult their Program Director.@Unavailable in on-campus mode at Springfield in 2022*
Agricultural Engineering major part-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Major study: Agricultural Engineering (Major Study Code: 16922)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
1,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,21,2ENM1600 Engineering Mathematics1,21,2ENG1100 Introduction to Engineering Design
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,32CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
Year 1 Practice Courses
M2,31,2ENG1901 Engineering Practice 1
Year 2
1,21ENG1004 Engineering Problem Solving Principles1,2,31,2MEC1201 Engineering Materials1,2,31,2ENG2002 Technology, Sustainability and Society22SVY1500 Spatial Science for Engineers
Year 3
11AGR2302 Agricultural MachineryPre-requisite: ENM1600 orStudents must be enrolled in
11ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCN
22AGR2301 Agricultural Science
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081251© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Agricultural Engineering (Major Study Code: 16922)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
22ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENS
Year 3 Practice Courses
M3AGR2902 Field Practice^
Year 4
Pre-requisite: CIV1500 orCIV1501 or Students must be
11ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPRPre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: CIV1501 orCIV1500 or Students must be
22CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPRPre-requisite: (MEC2402 andENG1100) or Students must
22MEC2301 Design of Machine Elements
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
Year 4 Practice Courses
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,32CIV2901 Geology and Geomechanics Practice
Pre-requisite or Co-requisite:ENV2103 or ENV1101
M1,2,32ENV2902 Hydraulics Practice
Year 5
11AGR3303 Agricultural Materials and Post-HarvestTechnologies
11AGR3304 Soil ScienceApproved Course (Select from minor or approved courselist)
22AGR3305 Precision and Smart Technologies in Agriculture
Year 6
Pre-requisite: ENV1101 orENV2103 or Students must
11ENV3104 Hydraulics II
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
11MEC2401 Dynamics I
CIV1501) or Students must
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081252© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Agricultural Engineering (Major Study Code: 16922)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
be enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENS or GEPR
22ENV3105 HydrologyApproved Course (Select from minor or approved courselist)
Year 6 Practice Courses
M2AGR3903 Soil and Water Engineering Practice 2M3AGR3905 Agricultural Engineering Practice
Year 7
1,31ENG3003 Engineering Management†
11AGR4305 Agricultural Soil Mechanics22ENG4110 Engineering Research Methodology
Pre-requisite: AGR3304 orStudents must be enrolled in
22ENV4106 Irrigation Science
one of the following Programs: GCEN or GCSC or GDSIor METC or MEPR or GCNSor GDNS orMENS orMSCN.
Year 7 Practice Courses
Pre-requisite: Students mustbe enrolled in one of the fol
M2ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENS
Year 8
Pre-requisite: ENG3902 andENG4110 and Students must
11ENG4111 Research Project Part 1
be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH
Approved Course (Select from minor or approved courselist)
Pre-requisite: ENG4111 andStudents must be enrolled in
22ENG4112 Research Project Part 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH
Approved Course (Select from minor or approved courselist)
Year 8 Practice Courses
Pre-requisite: ENG3902 andStudents must be enrolled in
M21ENG4903 Professional Practice 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI or
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081253© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Agricultural Engineering (Major Study Code: 16922)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
BEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.
1,2,3ENG4909 Work Experience - Professional
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Director
Pre-requisite: CIV2401 orCIV2403 or Students must be
22CIV3403 Geotechnical Engineering
enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
11ELE1301 Computer Engineering32ELE2103 Linear Systems and Control2,32ENG4004 Engineering Project and Operations
Management‡
Pre-requisite: MEC2401 orELE2103 or Students must
22MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCEN
11ENV2201 Land StudiesPre-requisite: (ENV3104 andENV3105) or Students must
22ENV4107 Water Resources Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENV1101 orENV2103 or Students must
22ENV4203 Public Health Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology@
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS
1,31GIS1402 Geographic Information SystemsPre-requisite: MEC1201 orStudents must be enrolled in
11MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCEN
22MEC2406 Introduction to Mechatronics and AutomationPre-requisite: MEC1201 orStudents must be enrolled in
11MEC3203 Materials Technology
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENS
2CLI2201 Climate Change and Variability
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081254© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Agricultural Engineering (Major Study Code: 16922)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: MEC2301 orStudents must be enrolled in
22MEC3303 Mechanical and Mechatronic System Design
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENSEnrolment is not permitted inREN1201 if REN8101 hasbeen previously completed.
11REN1201 Environmental Studies*
FootnotesThe residential school for this course may involve overnight field trips for which each student will be responsible for their own accommodationcosts.
^
The semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡Students who wish to enrol in ENV4204 Environmental Technology as an Approved course, should consult their Program Director.@Unavailable in on-campus mode at Springfield in 2022*
Civil Engineering major full-time recommended enrolment pattern (Toowoomba andSpringfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should click on the courselink in the table below to ascertain if a course is offered in another term.
Approved courses are included in the list of Academic courses. Students should select these courses from theapproved courses listing.
Major study: Civil Engineering (Major Study Code: 16923)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,211ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,211ENM1600 Engineering Mathematics1,211ENG1004 Engineering Problem Solving Principles1,2,311MEC1201 Engineering Materials1,221ENG1100 Introduction to Engineering Design
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,321CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
2,321ENG2002 Technology, Sustainability and Society221SVY1500 Spatial Science for Engineers
Practice Courses Year 1
M2,31,21ENG1901 Engineering Practice 1
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081255© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Civil Engineering (Major Study Code: 16923)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 2
Pre-requisite: ENM1600 orStudents must be enrolled in
112ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCNPre-requisite: CIV1500 orCIV1501 or Students must be
112ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPRPre-requisite: CIV1501 or Students must be enrolled in
112MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR
112CIV2605 Construction Engineering122Approved Course (Select from minor or approved course
list)Pre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
222ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENSPre-requisite: CIV1501 orCIV1500 or Students must be
222CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPRPre-requisite: (ENG1100 andMEC2402) or (ENG1100 and
222CIV2503 Structural Design I
CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in: GCEN or GEPR
Practice Courses Year 2
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,322CIV2901 Geology and Geomechanics Practice
Pre-requisite or Co-requisite:ENV2103 or ENV1101
M1,2,322ENV2902 Hydraulics Practice
Academic Courses Year 3
Pre-requisite: ENV1101 orENV2103 or Students must
113ENV3104 Hydraulics II
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: MEC2402 and(MAT1502 or ENM1600 or
113CIV3505 Structural Analysis
MAT1102) or Students must
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081256© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Civil Engineering (Major Study Code: 16923)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS or GEPRPre-requisite: CIV2503 or Students must be enrolled in
113CIV3506 Concrete Structures
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
1,313ENG3003 Engineering Management†
Pre-requisite: CIV2401 orCIV2403 or Students must be
223CIV3403 Geotechnical Engineering
enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
223ENV3105 Hydrology223CIV3703 Transport Engineering223ENG4110 Engineering Research Methodology
Practice Courses Year 3
Pre-requisite: MEC1201 andENG1901 or Students must
M313CIV3906 Civil Materials Practice
be enrolled in one of the following programs: ADCN orBCON or BCNHPre-requisite: CIV2503 or Students must be enrolled in
M33CIV3907 Civil Systems Practice
one of the following Programs: MENS or MEPRPre-requisite: Students mustbe enrolled in one of the fol
M2ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENS
Academic Courses Year 4
Pre-requisite: CIV3505 andCIV3506 or Students must be
114CIV4508 Structural Design II
enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
114Approved Courses (Select from minor or approved courselist)
Pre-requisite: ENG3902 andENG4110 and Students must
114ENG4111 Research Project Part 1
be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH
114Approved Courses (Select from minor or approved courselist)
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081257© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Civil Engineering (Major Study Code: 16923)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
224Approved Courses (Select from minor or approved courselist)
Pre-requisite: ENV1101 orENV2103 or Students must
224ENV4203 Public Health Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENG4111 andStudents must be enrolled in
224ENG4112 Research Project Part 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH
224Approved Course (Select from minor or approved courselist)
Practice Courses Year 4
Co-requisite: CIV4508 or Students must be enrolled in the
M1,2CIV4908 Civil Design Practice
following Program: MEPR orMENSPre-requisite: ENG3902 andStudents must be enrolled in
M214ENG4903 Professional Practice 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.
1,2,3ENG4909 Work Experience - Professional
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Director
11AGR3304 Soil Science2CIV3603 Construction Methods
Pre-requisite: CIV3506 or(MEC2402 and MEC3203)
1CIV4803 Mechanics and Technology of FibreComposites
2CIV5704 Road and Street EngineeringPre-requisite: CIV3703 or Students must be enrolled in
1CIV5705 Pavement Design and Analysis
one of the following Programs: GCNS or GDNS or MENSor PGCN or GCAE or MEPRPre-requisite: MEC3107 orMEC3102 or ENV3104 or S
1MEC5100 Computational Fluid Dynamics
tudents must be enrolled inthe following Program: MEPR
2,32ENG4004 Engineering Project and Operations
Management‡
11ENV2201 Land StudiesPre-requisite: (ENV3104 andENV3105) or Students must
22ENV4107 Water Resources Engineering
be enrolled in one of the fol
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081258© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Civil Engineering (Major Study Code: 16923)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
lowing Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology@
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS
1,31GIS1402 Geographic Information SystemsPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
11MEC2401 Dynamics I
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENS or GEPRPre-requisite: SVY1102 orSVY1500 or Students must
22SVY1104 Survey Computations A
be enrolled in one of the following Programs: GCST orGDST or MSPT
22URP3201 Sustainable Urban Design and Development11URP1001 Introduction to Urban and Regional Planning
FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡Students who wish to enrol in ENV4204 Environmental Technology as an Approved course, should consult their Program Director.@
Civil Engineering major part-time recommended enrolment pattern (Toowoomba andSpringfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Major study: Civil Engineering (Major Study Code: 16923)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
1,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,21,2ENM1600 Engineering Mathematics1,21,2ENG1100 Introduction to Engineering Design
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,32CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPR
Year 2
1,21ENG1004 Engineering Problem Solving Principles1,2,31,2MEC1201 Engineering Materials1,2,31,2ENG2002 Technology, Sustainability and Society
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081259© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Civil Engineering (Major Study Code: 16923)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
22SVY1500 Spatial Science for Engineers
Year 2 Practice Courses
M2,31,2ENG1901 Engineering Practice 1
Year 3
Pre-requisite: ENM1600 orStudents must be enrolled in
11ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCNPre-requisite: CIV1500 orCIV1501 or Students must be
11ENV2103 Hydraulics I
enrolled in the following Program: GCEN or GEPR
Approved Course (Select from minor or approved courselist)
Pre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
22ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENS
Year 3 Practice Courses
Pre-requisite or Co-requisite:ENV2103 or ENV1101
M1,2,32ENV2902 Hydraulics Practice
Year 4
Pre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR
11CIV2605 Construction EngineeringPre-requisite: CIV1501 orCIV1500 or Students must be
22CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN or GEPRPre-requisite: (ENG1100 andMEC2402) or (ENG1100 and
22CIV2503 Structural Design I
CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in: GCEN or GEPR
Year 4 Practice Courses
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,32CIV2901 Geology and Geomechanics Practice
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081260© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Civil Engineering (Major Study Code: 16923)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 5
Pre-requisite: ENV1101 orENV2103 or Students must
11ENV3104 Hydraulics II
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: MEC2402 and(MAT1502 or ENM1600 or
11CIV3505 Structural Analysis
MAT1102) or Students mustbe enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS or GEPRPre-requisite: CIV2401 orCIV2403 or Students must be
22CIV3403 Geotechnical Engineering
enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
22ENV3105 Hydrology
Year 5 Practice Courses
Pre-requisite: MEC1201 andENG1901 or Students must
31CIV3906 Civil Materials Practice
be enrolled in one of the following programs: ADCN orBCON or BCNH
Year 6
Pre-requisite: CIV2503 or Students must be enrolled in
11CIV3506 Concrete Structures
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
1,31ENG3003 Engineering Management†
22CIV3703 Transport EngineeringApproved Course (Select from minor or approved courselist)
Year 6 Practice Courses
Pre-requisite: CIV2503 or Students must be enrolled in
3CIV3907 Civil Systems Practice
one of the following Programs: MENS or MEPR
Year 7
Pre-requisite: CIV3505 andCIV3506 or Students must be
11CIV4508 Structural Design II
enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
Approved Course (Select from minor or approved courselist)
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081261© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Civil Engineering (Major Study Code: 16923)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
22ENG4110 Engineering Research MethodologyPre-requisite: ENV1101 orENV2103 or Students must
22ENV4203 Public Health Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
Year 7 Practice Courses
Pre-requisite: Students mustbe enrolled in one of the fol
M2ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENS
Year 8
Pre-requisite: ENG3902 andENG4110 and Students must
11ENG4111 Research Project Part 1
be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH
Approved Course (Select from minor or approved courselist)
Pre-requisite: ENG4111 andStudents must be enrolled in
1,21,2ENG4112 Research Project Part 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH
Approved Course (Select from minor or approved courselist)
Year 8 Practice Courses
Co-requisite: CIV4508 or Students must be enrolled in the
2CIV4908 Civil Design Practice
following Program: MEPR orMENSPre-requisite: ENG3902 andStudents must be enrolled in
M21ENG4903 Professional Practice 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.
1,2,3ENG4909 Work Experience - Professional
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Director
11AGR3304 Soil Science2CIV3603 Construction Methods
Pre-requisite: CIV3506 or(MEC2402 and MEC3203)
1CIV4803 Mechanics and Technology of FibreComposites
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081262© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Civil Engineering (Major Study Code: 16923)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
2CIV5704 Road and Street EngineeringPre-requisite: CIV3703 or Students must be enrolled in
1CIV5705 Pavement Design and Analysis
one of the following Programs: GCNS or GDNS or MENSor PGCN or GCAE or MEPRPre-requisite: MEC3107 orMEC3102 or ENV3104 or S
1MEC5100 Computational Fluid Dynamics
tudents must be enrolled inthe following Program: MEPR
2,32ENG4004 Engineering Project and Operations
Management‡
11ENV2201 Land StudiesPre-requisite: (ENV3104 andENV3105) or Students must
22ENV4107 Water Resources Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology@
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS
1,31GIS1402 Geographic Information SystemsPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
11MEC2401 Dynamics I
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENS or GEPRPre-requisite: SVY1102 orSVY1500 or Students must
22SVY1104 Survey Computations A
be enrolled in one of the following Programs: GCST orGDST or MSPT
22URP3201 Sustainable Urban Design and Development11URP1001 Introduction to Urban and Regional Planning
FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡Students who wish to enrol in ENV4204 Environmental Technology as an Approved course, should consult their Program Director.@
Computer Systems Engineering major full-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external students
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081263© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
for our Toowoomba campus. Students following a non-standard enrolment pattern should click on the courselink in the table below to ascertain if a course is offered in another term.
Major study: Computer Systems Engineering (Major Study Code: 16924)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,211ENM1600 Engineering Mathematics1,211ENG1004 Engineering Problem Solving Principles111ELE1301 Computer Engineering111ELE1502 Electronic Circuits1,221ENG1002 Introduction to Engineering and Built
Environment Applications1,2,321CSC1401 Foundation Programming
Pre-requisite: ENM1500 orENM1600 or Students must
2,321ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
1,221ENG1100 Introduction to Engineering Design
Practice Courses Year 1
M2,31,21ENG1901 Engineering Practice 1M321ELE1911 Electrical and Electronic Practice A
Academic Courses Year 2
Pre-requisite: ENM1600 orStudents must be enrolled in
112ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCN
112ELE2303 Embedded Systems DesignPre-requisite: CSC1401 orStudents must be enrolled in
112CSC2402 Object-Oriented Programming in C++
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTN
112MAT1101 Discrete Mathematics for Computing222ELE2103 Linear Systems and Control1,2,322ENG2002 Technology, Sustainability and Society
Pre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
222ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENS
222Approved Course (Select from minor or approved courselist)
Practice Courses Year 2
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
M312ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENS
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081264© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Computer Systems Engineering (Major Study Code: 16924)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
2ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENS
Academic Courses Year 3
Pre-requisite: (ELE1502 andELE1801) or Students must
113ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETC or GEPRPre-requisite: ELE2103 or Students must be enrolled in
113ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCor GEPR
113ELE3305 Computer Systems and CommunicationsProtocols
1,2,313Approved Course (Select from minor or approved courselist)
Pre-requisite: ELE1301 or Students must be enrolled in
223ELE3307 Real Time Systems
one of the following Programs: GCEN or GCNS or METCor MENS or MEPR
223Approved Course (Select from minor or approved courselist)
223ELE3107 Signal Processing223ENG4110 Engineering Research Methodology
Practice Courses Year 3
Pre-requisite: (ELE1801 andELE1301 and ELE1502) or
M313ELE3914 Electrical and Electronic Practice D
Students must be enrolled inone of the following Programs: MENS or MEPRPre-requisite: ELE1801 andELE1301 and ELE1502 or S
M223ELE3915 Electrical and Electronic Practice E
tudents must be enrolled inone of the following Programs: MENS or MEPRPre-requisite: Students mustbe enrolled in one of the fol
M2ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENS
Academic Courses Year 4
114Approved Course (Select from minor or approved courselist)
Pre-requisite: CSC14011,214CSC2408 Software Development Tools1,314ENG3003 Engineering Management†
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081265© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Computer Systems Engineering (Major Study Code: 16924)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: ENG3902 andENG4110 and Students must
114ENG4111 Research Project Part 1
be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH
224Approved Course (Select from minor or approved courselist)
Pre-requisite: CSC2402 orStudents must be enrolled in
224CSC2401 Algorithms and Data Structures
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPITPre-requisite: ENG4111 andStudents must be enrolled in
224ENG4112 Research Project Part 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH
2,324Approved Course (Select from minor or approved courselist)
Practice Courses Year 4
Pre-requisite: ENG3902 andStudents must be enrolled in
M214ENG4903 Professional Practice 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.
1,2,3ENG4909 Work Experience - Professional
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Director
Pre-requisite: CSC1401 orCIS1000 Enrolment is not
11CSC3400 Database Systems
permitted in CSC3400 ifCIS2002 has been previouslycompleted.Pre-req: CSC2408; and Pre-req or Co-req: CSC2402; or
11CSC3403 Comparative Programming Languages
Students must be enrolled inone of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT Enrolmentis not permitted in CSC3403if CIS3001 has been previously completedPre-requisite: CSC140111CSC3407 Network Fundamentals and RoutingPre-requisite: CSC240811CSC3412 System and Security AdministrationPre-requisite: CSC341222CSC3413 Network Design and Analysis
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081266© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Computer Systems Engineering (Major Study Code: 16924)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: CSC3407 orStudents must be enrolled in
11CSC3420 Mobile Internet Technology
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPITPre-requisite: CSC3407 orStudents must be enrolled in
22CSC3427 Switching, Wireless and WAN Technologies
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPITPre-requisite: ELE1502 or Students must be enrolled in
22ELE2504 Electronic Design and Analysis
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN or GEPRPre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
22ELE3506 Electronic Measurement
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENSPre-requisite: ELE1801 or Students must be enrolled in
1ELE3804 Power Systems Protection
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: (ELE2504 andELE2601) or Students must
22ELE4606 Communication Systems
be enrolled in one of the following Programs: GCEN orMETC or MEPR or MENS orGCNS or GDNSPre-requisite: ELE1301 or Students must be enrolled in
11ELE4607 Advanced Digital Communications
one of the following Programs: GCEN or METC or GCNSor GDNS or MENS or MEPRPre-requisite: ELE2601 or Students must be enrolled in
11ELE5001 Industrial Communications Protocols
the following Program: GCNS, GDNS, MENS or MEPR
2,32ENG4004 Engineering Project and Operations
Management‡
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,32CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPRPre-requisite: ELE2103 or(MEC1501 and ELE2101 as
2MEC2501 Process Control Systems
Co-requisite or Pre-requisite)or Students must be enrolledin the following Program:GEPR
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081267© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Computer Systems Engineering (Major Study Code: 16924)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: MEC2401 orELE2103 or Students must
22MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCEN
FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡
Computer Systems Engineering major part-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should click on the courselink in the table below to ascertain if a course is offered in another term.
Major study: Computer Systems Engineering (Major Study Code: 16924)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
1,21,2ENM1600 Engineering Mathematics1,21ENG1004 Engineering Problem Solving Principles11ELE1301 Computer Engineering11ELE1502 Electronic Circuits
Year 1 Practice Courses
M2,31,2ENG1901 Engineering Practice 1
Year 2
1,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,2,31,2CSC1401 Foundation ProgrammingPre-requisite: ENM1500 orENM1600 or Students must
2,32ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
1,21,2ENG1100 Introduction to Engineering Design
Year 2 Practice Courses
M32ELE1911 Electrical and Electronic Practice A
Year 3
Pre-requisite: ENM1600 orStudents must be enrolled in
11ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCN
11ELE2303 Embedded Systems Design
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081268© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Computer Systems Engineering (Major Study Code: 16924)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
22ELE2103 Linear Systems and Control1,2,31,2ENG2002 Technology, Sustainability and Society
Year 3 Practice Courses
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
M31ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENS
Year 4
Pre-requisite: CSC1401 orStudents must be enrolled in
11CSC2402 Object-Oriented Programming in C++
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTN
11MAT1101 Discrete Mathematics for ComputingPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
22ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENS
Approved Course (Select from minor or approved courselist)
Year 4 Practice Courses
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
2ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENS
Year 5
Pre-requisite: (ELE1502 andELE1801) or Students must
11ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETC or GEPRPre-requisite: ELE2103 or Students must be enrolled in
11ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCor GEPRPre-requisite: ELE1301 or Students must be enrolled in
22ELE3307 Real Time Systems
one of the following Programs: GCEN or GCNS or METCor MENS or MEPR
Approved Course (Select from minor or approved courselist)
Year 5 Practice Courses
Pre-requisite: (ELE1801 andELE1301 and ELE1502) or
M31ELE3914 Electrical and Electronic Practice D
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081269© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Computer Systems Engineering (Major Study Code: 16924)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Students must be enrolled inone of the following Programs: MENS or MEPR
Year 6
11ELE3305 Computer Systems and CommunicationsProtocolsApproved Course (Select from minor or approved courselist)
22ELE3107 Signal ProcessingApproved Course (Select from minor or approved courselist)
Year 6 Practice Courses
Pre-requisite: ELE1801 andELE1301 and ELE1502 or S
M22ELE3915 Electrical and Electronic Practice E
tudents must be enrolled inone of the following Programs: MENS or MEPR
Year 7
Pre-requisite: CSC14011,21,2CSC2408 Software Development ToolsApproved Course (Select from minor or approved courselist)
22ENG4110 Engineering Research MethodologyPre-requisite: CSC2402 orStudents must be enrolled in
22CSC2401 Algorithms and Data Structures
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT
Year 7 Practice Courses
Pre-requisite: Students mustbe enrolled in one of the fol
M2ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENS
Year 8
1,31ENG3003 Engineering Management†
Pre-requisite: ENG3902 andENG4110 and Students must
11ENG4111 Research Project Part 1
be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH
Approved Course (Select from minor or approved courselist)
Pre-requisite: ENG4111 andStudents must be enrolled in
1,21,2ENG4112 Research Project Part 2
one of the following Programs: BCNH or BCON or BEBB
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081270© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Computer Systems Engineering (Major Study Code: 16924)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
or BEBC or BEHB or BEHI orBEHS or BENG or BENH
Year 8 Practice Courses
Pre-requisite: ENG3902 andStudents must be enrolled in
M21ENG4903 Professional Practice 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.
1,2,3ENG4909 Work Experience - Professional
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Director
Pre-requisite: CSC1401 orCIS1000 Enrolment is not
11CSC3400 Database Systems
permitted in CSC3400 ifCIS2002 has been previouslycompleted.Pre-req: CSC2408; and Pre-req or Co-req: CSC2402; or
11CSC3403 Comparative Programming Languages
Students must be enrolled inone of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT Enrolmentis not permitted in CSC3403if CIS3001 has been previously completedPre-requisite: CSC140111CSC3407 Network Fundamentals and RoutingPre-requisite: CSC240811CSC3412 System and Security AdministrationPre-requisite: CSC341222CSC3413 Network Design and AnalysisPre-requisite: CSC3407 orStudents must be enrolled in
11CSC3420 Mobile Internet Technology
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPITPre-requisite: CSC3407 orStudents must be enrolled in
22CSC3427 Switching, Wireless and WAN Technologies
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPITPre-requisite: ELE1502 or Students must be enrolled in
22ELE2504 Electronic Design and Analysis
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN or GEPRPre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
22ELE3506 Electronic Measurement
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Program
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081271© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Computer Systems Engineering (Major Study Code: 16924)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
s: GCEN or METC or MEPRor MENSPre-requisite: ELE1801 or Students must be enrolled in
1ELE3804 Power Systems Protection
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: (ELE2504 andELE2601) or Students must
22ELE4606 Communication Systems
be enrolled in one of the following Programs: GCEN orMETC or MEPR or MENS orGCNS or GDNSPre-requisite: ELE1301 or Students must be enrolled in
11ELE4607 Advanced Digital Communications
one of the following Programs: GCEN or METC or GCNSor GDNS or MENS or MEPRPre-requisite: ELE2601 or Students must be enrolled in
11ELE5001 Industrial Communications Protocols
the following Program: GCNS, GDNS, MENS or MEPR
2,32ENG4004 Engineering Project and Operations
Management‡
Pre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,32CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPRPre-requisite: ELE2103 or(MEC1501 and ELE2101 as
2MEC2501 Process Control Systems
Co-requisite or Pre-requisite)or Students must be enrolledin the following Program:GEPRPre-requisite: MEC2401 orELE2103 or Students must
22MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCEN
FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡
Electrical and Electronic Engineering major full-time recommended enrolment pattern(Toowoomba and Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external students
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081272© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
for our Toowoomba campus. Students following a non-standard enrolment pattern should click on the courselink in the table below to ascertain if a course is offered in another term.
Major study: Electrical and Electronic Engineering (Major Study Code: 16925)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,211ENM1600 Engineering Mathematics1,211ENG1004 Engineering Problem Solving Principles111ELE1301 Computer Engineering111ELE1502 Electronic Circuits1,221ENG1002 Introduction to Engineering and Built
Environment Applications1,2,321MEC1201 Engineering Materials
Pre-requisite: ENM1500 orENM1600 or Students must
2,321ELE1801 Electrical Technology
be enrolled in one of the following Programs: MEPR orGCEN or GEPR
1,221ENG1100 Introduction to Engineering Design
Practice Courses Year 1
M2,311,21ENG1901 Engineering Practice 1M321ELE1911 Electrical and Electronic Practice A
Academic Courses Year 2
Pre-requisite: ENM1600 orStudents must be enrolled in
112ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCN
112ELE2303 Embedded Systems Design1,2,312ENG2002 Technology, Sustainability and Society
Pre-requisite: (ELE1502 andELE1801) or Students must
112ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETC or GEPR
222ELE2103 Linear Systems and ControlPre-requisite: ELE1301 or Students must be enrolled in
222ELE3307 Real Time Systems
one of the following Programs: GCEN or GCNS or METCor MENS or MEPRPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
222ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENSPre-requisite: ELE1502 or Students must be enrolled in
222ELE2504 Electronic Design and Analysis
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN or GEPR
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081273© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 16925)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Practice Courses Year 2
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
M312ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENSPre-requisite: (ELE1301 andELE1502 and ELE1801) or
2ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENS
Academic Courses Year 3
Pre-requisite: ELE1801 or Students must be enrolled in
113ELE3803 Electrical Plant
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR
113ELE3305 Computer Systems and CommunicationsProtocols
113Approved Course (Select from minor or approved courselist)
Pre-requisite: ELE2103 or Students must be enrolled in
113ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCor GEPRPre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
223ELE3506 Electronic Measurement
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENS
223Approved Course (Select from minor or approved courselist)
223ELE3107 Signal Processing223ENG4110 Engineering Research Methodology
Practice Courses Year 3
Pre-requisite: (ELE1801 andELE1301 and ELE1502) or
M313ELE3914 Electrical and Electronic Practice D
Students must be enrolled inone of the following Programs: MENS or MEPRPre-requisite: ELE1801 andELE1301 and ELE1502 or S
M223ELE3915 Electrical and Electronic Practice E
tudents must be enrolled inone of the following Programs: MENS or MEPRPre-requisite: Students mustbe enrolled in one of the fol
M2ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC or
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081274© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 16925)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
BEHB or BEHI or BEHS orBENG or BENH or MENS
Academic Courses Year 4
Pre-requisite: {(MAT1502 orENM1600) and ELE2103 and
114ELE4605 Fields and Waves
ELE2601} or Students mustbe enrolled in one of the following Programs: MEPR orMENS or GCNS or GDNS
114Approved Course (Select from minor or approved courselist)
1,314ENG3003 Engineering Management†
Pre-requisite: ENG3902 andENG4110 and Students must
114ENG4111 Research Project Part 1
be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH
224Approved Course (Select from minor or approved courselist)
Pre-requisite: (ELE2504 andELE2601) or Students must
224ELE4606 Communication Systems
be enrolled in one of the following Programs: GCEN orMETC or MEPR or MENS orGCNS or GDNSPre-requisite: ENG4111 andStudents must be enrolled in
224ENG4112 Research Project Part 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH
2,324Approved Course (Select from minor or approved courselist)
Practice Courses Year 4
Pre-requisite: ENG3902 andStudents must be enrolled in
M214ENG4903 Professional Practice 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.
1,2,3ENG4909 Work Experience - Professional
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Director
Pre-requisite: ELE1801 or Students must be enrolled in
22ELE2704 Electricity Supply Systems
one of the following Programs: MEPR or GCEN or METCor GEPR
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081275© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 16925)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: ELE1801 or Students must be enrolled in
1ELE3804 Power Systems Protection
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: (ELE1502 andELE1801) or Students must
22ELE3805 Power Electronics Principles and Applications
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
11ELE3807 Power Systems Analysis1ELE4109 Measurement Science & Instrument
Engineering*
Pre-requisite: ELE1301 or Students must be enrolled in
11ELE4607 Advanced Digital Communications
one of the following Programs: GCEN or METC or GCNSor GDNS or MENS or MEPRPre-requisite: ELE2601 or Students must be enrolled in
11ELE5001 Industrial Communications Protocols
the following Program: GCNS, GDNS, MENS or MEPR
1,21,2CSC1401 Foundation ProgrammingPre-requisite: CSC1401 orStudents must be enrolled in
11CSC2402 Object-Oriented Programming in C++
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTNPre-requisite: ENM1600 or(ENM1500 and CIV1500) or
2,32CIV1501 Engineering Statics
Students must be enrolled inone of the following Programs: MEPR or GCEN or GEPRPre-requisite: CIV1500 orCIV1501 or Students must be
22MEC2106 Introduction to Thermofluids
enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENS or GEPRPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
11MEC2401 Dynamics I
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENS or GEPRPre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPRPre-requisite: ELE2103 or(MEC1501 and ELE2101 as
2MEC2501 Process Control Systems
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081276© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 16925)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Co-requisite or Pre-requisite)or Students must be enrolledin the following Program:GEPR
22MEC3204 Production EngineeringPre-requisite: ((MEC2101andMEC3102) or MEC2106)
22MEC4104 Renewable Energy Technology
or Students must be enrolledin one of the following Programs: GCEN or GCNS orGDNS or METC or MENS orMEPRPre-requisite: MEC2401 orELE2103 or Students must
22MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCEN
2,32ENG4004 Engineering Project and Operations
Management‡
HR11CHE1110 Chemistry 1^
FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†Offered in odd years only e.g. 2021, 2023 etc*The semester 3 offering of this course is offered in even numbered years only.‡CHE1110 Chemistry 1 has a highly recommended residential school requirement in External mode.^
Electrical and Electronic Engineering major part-time recommended enrolment pattern(Toowoomba and Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Major study: Electrical and Electronic Engineering (Major Study Code: 16925)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
1,21,2ENM1600 Engineering Mathematics1,21ENG1004 Engineering Problem Solving Principles1,21,2ENG1002 Introduction to Engineering and Built
Environment Applications1,2,31,2MEC1201 Engineering Materials
Year 1 Practice Courses
M2,31,2ENG1901 Engineering Practice 1
Year 2
11ELE1301 Computer Engineering11ELE1502 Electronic Circuits
Pre-requisite: ENM1500 orENM1600 or Students must
2,32ELE1801 Electrical Technology
be enrolled in one of the fol
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081277© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 16925)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
lowing Programs: MEPR orGCEN or GEPR
1,21,2ENG1100 Introduction to Engineering Design
Year 2 Practice Courses
M32ELE1911 Electrical and Electronic Practice A
Year 3
Pre-requisite: ENM1600 orStudents must be enrolled in
11ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR or MSCN
11ELE2303 Embedded Systems Design22ELE2103 Linear Systems and Control
Pre-requisite: ELE1301 or Students must be enrolled in
22ELE3307 Real Time Systems
one of the following Programs: GCEN or GCNS or METCor MENS or MEPR
Year 3 Practice Courses
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
M31ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENS
Year 4
1,2,31,2ENG2002 Technology, Sustainability and SocietyPre-requisite: (ELE1502 andELE1801) or Students must
11ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETC or GEPRPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
22ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GDET or METC or GDNSor MENSPre-requisite: ELE1502 or Students must be enrolled in
22ELE2504 Electronic Design and Analysis
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN or GEPR
Year 4 Practice Courses
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
2ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENS
Year 5
Pre-requisite: ELE1801 or Students must be enrolled in
11ELE3803 Electrical Plant
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081278© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 16925)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSor GEPR
11ELE3305 Computer Systems and CommunicationsProtocols
Pre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
22ELE3506 Electronic Measurement
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENS
12Approved Course (Select from minor or approved courselist)
Year 5 Practice Courses
Pre-requisite: (ELE1801 andELE1301 and ELE1502) or
M31ELE3914 Electrical and Electronic Practice D
Students must be enrolled inone of the following Programs: MENS or MEPR
Year 6
Pre-requisite: ELE2103 or Students must be enrolled in
11ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCor GEPR
11Approved Course (Select from minor or approved courselist)
22ELE3107 Signal Processing22Approved Course (Select from minor or approved course
list)
Year 6 Practice Courses
Pre-requisite: ELE1801 andELE1301 and ELE1502 or S
M22ELE3915 Electrical and Electronic Practice E
tudents must be enrolled inone of the following Programs: MENS or MEPR
Year 7
Pre-requisite: {(MAT1502 orENM1600) and ELE2103 and
11ELE4605 Fields and Waves
ELE2601} or Students mustbe enrolled in one of the following Programs: MEPR orMENS or GCNS or GDNS
11Approved Course (Select from minor or approved courselist)
22ENG4110 Engineering Research MethodologyPre-requisite: (ELE2504 andELE2601) or Students must
22ELE4606 Communication Systems
be enrolled in one of the following Programs: GCEN or
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081279© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)
Major study: Electrical and Electronic Engineering (Major Study Code: 16925)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
METC or MEPR or MENS orGCNS or GDNS
Year 7 Practice Courses
Pre-requisite: Students mustbe enrolled in one of the fol
M2ENG3902 Professional Practice 1
lowing Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH or MENS
Year 8
1,31ENG3003 Engineering Management†
Pre-requisite: ENG3902 andENG4110 and Students must
11ENG4111 Research Project Part 1
be enrolled in one of the following Programs: BCNH orBCON or BEBB or BEBC orBEHB or BEHI or BEHS orBENG or BENH
22Approved Course (Select from minor or approved courselist)
Pre-requisite: ENG4111 andStudents must be enrolled in
1,21,2ENG4112 Research Project Part 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH
Year 8 Practice Courses
Pre-requisite: ENG3902 andStudents must be enrolled in
M21ENG4903 Professional Practice 2
one of the following Programs: BCNH or BCON or BEBBor BEBC or BEHB or BEHI orBEHS or BENG or BENH orMENS. Students cannot enrolin ENG3902 and ENG4903in the same semester.
1,2,3ENG4909 Work Experience - Professional
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Director
Pre-requisite: ELE1801 or Students must be enrolled in
22ELE2704 Electricity Supply Systems
one of the following Programs: MEPR or GCEN or METCor GEPRPre-requisite: ELE1801 or Students must be enrolled in
1ELE3804 Power Systems Protection
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: (ELE1502 andELE1801) or Students must
22ELE3805 Power Electronics Principles and Applications
be enrolled in one of the following Programs: GCEN or
This version produced 21 Apr 2022.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV12081280© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2022)