hazardous location linear fluorescent …tnblnx3.tnb.com/emalbum/albums//us_resource/gm7236_hazlux...

HAZARDOUS LOCATION LINEAR FLUORESCENT LIGHTING

Explosion Proof Fluorescent Light Luminaire

Explosion Proof Fluorescent Light LuminaireHaz-Linear 7 Linear Fluorescent XFM Series

The XFM Series is a must for any explosive atmosphere location! This product has five different hub entries at each end, enabling the installer to wire the luminaire at more desirable angles. Center ballast placement provides a more balanced luminaire for ease of installation and weight distribution. The XFM Series is available in 2' (2 lamp fixture only) and 4' lengths for 2, 3 and 4 lamp combinations in T5, T5HO, T8, and T8HO. Lamps included.

Applications

Features

Listings

• Paint spray booths

• Marine outdoor

• Chemical plants

• Wastewater treatment areas

• Oil drilling rigs, refineries

• Grain elevators

• Coal & dust storage

• Factory sealed, cast natural aluminum (U.S. Foundry) that is lightweight.

• Ballast mounted in the center for better balance and low profile.

• (5) 1/2" NPT hubs located at 0°, 45° and 90° angles.

• One piece painted aluminum reflector

• .189" wall borosilicate glass tubes

• UL 844 listed and labeled for hazardous locations

• Class I, Division 1, Groups C and D; Class I, Division 2, Groups A, B, C and D

• Class II, Divisions 1 and 2, Groups E, F and G

• Class III

• UL 1598A listed and labeled – marine type lighting luminaire – outside type (salt water)

• UL 1598A testing equivalent to NEMA 4X requirements for hose-down and corrosion resistance

• UL listed 1598

• UL listed and labeled for use inside paint spray booths and rooms

• Also meets requirements for National Fire Protection Association (NFPA) Standard 33 and National Electrical Code (NEC) Article 516

• UL C approved and labeled Class I, Division 1, Groups C and D

• NEMA 3, 4X, 7CD, 9EFG

• Simultaneous presence Class I and Class II

• Class I, Zone 1, Group II A

• Class I, Zone 1, Group II B

XFM Series

T8 LAMP TYPE

2 LAMP QTY

4 LENGTH (ft)

UN VOLTAGE OPTIONS

T5**T8*†

T5HO*†

T8HO

2 (lamp)3 (lamp)4 (lamp)

2: (length)4: (length)

UN: Universal 120-277 50/60 Hz†

34: 347 volt (T5HO & T8 only)

EB: Emergency battery backup*** WG: Stainless steel guard P: Polycarbonate shield SR: Premium specular reflector (93%

reflective specular reflector insert) MK: Wall/ceiling mount kit factory

installation for the 4 lamp fixture (the XFM-4401 can be field installed on 2 & 3 lamp fixtures)

* 5000K lamp standard for T5HO and T8 lamps ** 4100K lamp standard for T8HO and T5 lamps 3 and 4 lamp luminaires not available in 2 ft. length 3 lamp luminaires not available in T5 or T8HO*** 4' two lamp ONLY – 120V or 277V operation environment † Normally stocked Consult factory for non-standard luminaires.

Operating Temperature Codes Based on 40° C Ambient

LuminaireClass I, DIV 1 Groups C & D

Class I, DIV 2 Groups A, B, C, D

Class II, DIV 1 Groups E, F, G

Simultaneous Presence Class I & II

XFM T6 = 85° C T4 = 135° C T4 = 135° C T4 = 135° C

Lamp Wattages

2 ft. WATTS 4 ft. WATTS

T5 14 WATT T5 28 WATTT5HO 24 WATT T5HO 54 WATTT8 17 WATT T8 32 WATTT8HO N/A T8HO 44 WATT


FeaturesOperation

• Only available as 4 ft. 2 lamp luminaire

• Vented battery compartment

• Explosion proof test switch and charging indicator light

• Minimum starting temperature 0º C (32º F)

• Maintenance free emergency ballast/battery pack/charger

• 575 to 1200 lumen operation (depending on lamp type)

• 3 year warranty

• Operates normally on 120V, 277V, 60 Hz or 220V 50 Hz

• Luminaire switches to charging mode and resumes normal lighting once AC power is restored

• When power fails the luminaire automatically switches to emergency mode. In emergency mode one lamp will provide safe egress lighting for at least 90 minutes.

Options

Mounting Options

Emergency Battery Backup Ballast

Stainless Steel Guards

Description Catalog Number

Stainless Steel Guard 2 lamp 2ft XFM-4466Stainless Steel Guard 2 lamp 4ft XFM-4211Stainless Steel Guard 3 lamp 4ft XFM-4557Stainless Steel Guard 4 lamp 4ft (2) XFM-4211

Polycarbonate Shields (+/- 1/16" thickness)


Polycarbonate Shield 2 lamp 2ft XFM-4464Polycarbonate Shield 2 lamp 4ft XFM-4209Polycarbonate Shield 3 lamp 4ft XFM-4497Polycarbonate Shield 4 lamp 4ft (2) XFM-4209

Mounting Hanger Kits


Wall & Ceiling Mounting Hanger Kit 2 or 3 lamp XFM-4401Wall & Ceiling Mounting Hanger Kit 4 lamp Option ‘MK’ - Factory InstalledDrop Mounting Hanger Kit 2 or 3 lamp XFM-4405Drop Mounting Hanger Kit 4 lamp XFM-4403

UL 595, 844, 924, 1598

Wall/ceiling mount kitFor 2 or 3 lampP/N XFM-4401

Drop mount kitFor 2 or 3 lamp P/N XFM-4405P/N XFM-4403

Must be factory installed

Wall/ceiling mount kitFor 4 lampP/N Option ‘MK’


2L 2FT. Dimensions

Weights

4 Lamp 4 Ft. FixtureFixture Weight: 80#Shipping Weight: 84#




2 Lamp 4 Ft. Fixture(EMERGENCY)Fixture Weight: 57#Shipping Weight: 60#

Dimensions (Nominal)

48 7/8”

45 HUB

45 HUB

STDHUB

18 3/

4”

53 5/8”

7 1/4”

7 1/4”

90 HUB

4L 4FT. Dimensions

48 7/8”

45 HUB

45 HUB

STDHUB 13”

53 5/8”

7 1/4”

7 1/4”

90 HUB

48 7/8”

45 HUB

45 HUB

STDHUB

9”

53 5/8”

7 1/4”

7 1/4”

90 HUB

24 7/8”

45 HUB

45 HUB

STDHUB 9”

29 5/8”

7 1/4”

7 1/4”

90 HUB

2L 2FT. Dimensions

2L 4FT. Dimensions

3L 4FT. Dimensions

48 7/8”

45 HUB

45 HUB

STDHUB

18 3/

4”

53 5/8”

7 1/4”

7 1/4”

90 HUB

4L 4FT. Dimensions

48 7/8”

45 HUB

45 HUB

STDHUB 13”

53 5/8”

7 1/4”

7 1/4”

90 HUB

48 7/8”

45 HUB

45 HUB

STDHUB

9”

53 5/8”

7 1/4”

7 1/4”

90 HUB

24 7/8”

45 HUB

45 HUB

STDHUB 9”

29 5/8”

7 1/4”

7 1/4”

90 HUB

2L 2FT. Dimensions

2L 4FT. Dimensions

3L 4FT. Dimensions

48 7/8”

45 HUB

45 HUB

STDHUB

18 3/

4”

53 5/8”

7 1/4”

7 1/4”

90 HUB

4L 4FT. Dimensions

48 7/8”

45 HUB

45 HUB

STDHUB 13”

53 5/8”

7 1/4”

7 1/4”

90 HUB

48 7/8”

45 HUB

45 HUB

STDHUB

9”

53 5/8”

7 1/4”

7 1/4”

90 HUB

24 7/8”

45 HUB

45 HUB

STDHUB 9”

29 5/8”

7 1/4”

7 1/4”

90 HUB

2L 2FT. Dimensions

2L 4FT. Dimensions

3L 4FT. Dimensions

48 7/8”

45 HUB

45 HUB

STDHUB

18 3/

4”

53 5/8”

7 1/4”

7 1/4”

90 HUB

4L 4FT. Dimensions

48 7/8”

45 HUB

45 HUB

STDHUB 13”

53 5/8”

7 1/4”

7 1/4”

90 HUB

48 7/8”

45 HUB

45 HUB

STDHUB

9”

53 5/8”

7 1/4”

7 1/4”

90 HUB

24 7/8”

45 HUB

45 HUB

STDHUB 9”

29 5/8”

7 1/4”

7 1/4”

90 HUB

2L 2FT. Dimensions

2L 4FT. Dimensions

3L 4FT. Dimensions

48 7/8”

45 HUB

45 HUB

STDHUB

18 3/

4”

53 5/8”

7 1/4”

7 1/4”

90 HUB

4L 4FT. Dimensions

48 7/8”

45 HUB

45 HUB

STDHUB 13”

53 5/8”

7 1/4”

7 1/4”

90 HUB

48 7/8”

45 HUB

45 HUB

STDHUB

9”

53 5/8”

7 1/4”

7 1/4”

90 HUB

24 7/8”

45 HUB

45 HUB

STDHUB 9”

29 5/8”

7 1/4”

7 1/4”

90 HUB

2L 2FT. Dimensions

2L 4FT. Dimensions

3L 4FT. Dimensions

48 7/8”

45 HUB

45 HUB

STDHUB

18 3/

4”

53 5/8”

7 1/4”

7 1/4”

90 HUB

4L 4FT. Dimensions

48 7/8”

45 HUB

45 HUB

STDHUB 13”

53 5/8”

7 1/4”

7 1/4”

90 HUB

48 7/8”

45 HUB

45 HUB

STDHUB

9”

53 5/8”

7 1/4”

7 1/4”

90 HUB

24 7/8”

45 HUB

45 HUB

STDHUB 9”

29 5/8”

7 1/4”

7 1/4”

90 HUB

2L 2FT. Dimensions

2L 4FT. Dimensions

3L 4FT. Dimensions

48 7/8”

45 HUB

45 HUB

STDHUB

18 3/

4”

53 5/8”

7 1/4”

7 1/4”

90 HUB

4L 4FT. Dimensions

48 7/8”

45 HUB

45 HUB

STDHUB 13”

53 5/8”

7 1/4”

7 1/4”

90 HUB

48 7/8”

45 HUB

45 HUB

STDHUB

9”

53 5/8”

7 1/4”

7 1/4”

90 HUB

24 7/8”

45 HUB

45 HUB

STDHUB 9”

29 5/8”

7 1/4”

7 1/4”

90 HUB

2L 2FT. Dimensions

2L 4FT. Dimensions

3L 4FT. Dimensions

48 7/8”

45 HUB

45 HUB

STDHUB

18 3/

4”

53 5/8”

7 1/4”

7 1/4”

90 HUB

4L 4FT. Dimensions

48 7/8”

45 HUB

45 HUB

STDHUB 13”

53 5/8”

7 1/4”

7 1/4”

90 HUB

48 7/8”

45 HUB

45 HUB

STDHUB

9”

53 5/8”

7 1/4”

7 1/4”

90 HUB

24 7/8”

45 HUB

45 HUB

STDHUB 9”

29 5/8”

7 1/4”

7 1/4”

90 HUB

2L 2FT. Dimensions

2L 4FT. Dimensions

3L 4FT. Dimensions

2L 4FT. Dimensions

3L 4FT. Dimensions

4L 4FT. Dimensions

Front Access Industrial Vapor/Dust Proof Fluorescent Light Luminaire

Haz-Linear 6 Linear Fluorescent DFP Series

The DFP Series is a very versatile luminaire that is UL listed for hazardous environments (Class I, Division 2, Groups A, B, C and D and Class II, Division 2, Groups F and G). It is an ideal luminaire for industrial applications, wet locations and task lighting. Optional adjustable mounting brackets allow for precise aiming in multiple angles suitable for most applications. The DFP Series is available in 2, 3, 4, 5 and 6 lamp options, all using a 3/16" tempered glass lens with acrylic and polycarbonate optional lenses. With multiple hub locations, the DFP Series can meet most of your wiring needs. Lamps not included.

Applications Features

Listings

Vapor/Dust Proof Lighting

• Chemical plants

• Paper mills

• Tunnels

• Water treatment

• Seacoast areas

• Prep, inspection, sanding

• Machining areas

• Coal & dust storage

* Note: DFP-T8 with EM option (emergency battery backup) reduces rated ambient to 40°C

• Front access luminaire for hazardous locations

• Hinged front door frame

• Hinged ballast tray

• 3/16" tempered glass lens

• Zinc latches

• Spring loaded lamp holders – standard

• Sturdy 18 Ga. steel white powder coated housing

• UL 844 listed U.S. and Canada

• UL 1598 listed U.S. and Canada for marine locations

• Class I, Division 2, Groups A, B, C, D

• Class II, Division 2, Groups F, G

• Class I, Zone 2, Groups II A & B

• Class III

• IP65, wet location

• 40° C ambient rating

• 55° C ambient rating for T8 (32 watt luminaires only)

DFP Series

T8 LAMP TYPE

4 LAMP QTY

UN VOLTAGE

PFT HUB OPTIONS

T5T8T5HOT8HO

2 (lamp, 4')3 (lamp, 4')4 (lamp, 4')5 (lamp, 4') 6 (lamp, 4')

UN: 120-277 50/60 Hz UN2: 347-480 50/60 Hz*** 34: 347 volt

PFT: 1/2" NPT hubs at top and side**

KH: Adjustable angle mount brackets† CX: Cable mount (with 5' cable) PW: 3 wire whip SR: Specular reflector WG: Wire guard F: Fusing A: Acrylic lens P: Polycarbonate lens EM: Emergency battery backup ballast

(consult factory)

** 1/2” NPT standard*** UN2 T5HO only † For horizontal or ceiling mounted luminaire only

T-Ratings

ModelRated Ambient

Deg. CSupply Wiring Temperature

Class I, Div. 2Operating Temperature Code

Class II, Div. 2Operating Temperature Code

DFP-T5 40° 75° T3C (160° C) T4A (120° C)DFP-T5HO 40° 75° T3C (160° C) T4A (120° C)DFP-T8HO 40° 75° T4A (120° C) T4A (120° C)DFP-T8* 55° 75° T5 (100° C) T4A (120° C)

Lamp Wattages

4 ft. WATTS

T5 28 WATTT5HO 54 WATTT8 32 WATTT8HO 44 WATT

Please ask your Thomas & Betts sales representative for a complete catalog of quality Thomas & Betts electrical products or visit us at www.tnb.com. For customer service, call 1-800-816-7809. For technical questions, call 1-888-862-3289.

© 2013 Thomas & Betts Corporation. All rights reserved. Printed in the U.S.A. 08/13/2.5M GM7236

Thomas & Betts Corporation Electrical Division 8155 T&B Boulevard Memphis, TN 38125 901-252-5000 www.tnb.com

Dimensions (Nominal)

Mounting Guide

Vapor/Dust Proof Lighting

53 1/8"

"A"

"A":2 LAMP: 12 3/16"3 & 4 LAMP: 16 3/16"5 & 6 LAMP: 20 11/16"

INTEGRATED ACCESSDOOR HINGE

1/2 NPT BOTH ENDS1/2 NPT HUBS

5 5/16”

51 1/2"

ROTARYDRAW LATCHES

BRACKETS FOROPTIONAL

MOUNTING KITSHINGED REFLECTOR

HINGED DOORFRAME

Adjustable Surface Mounting Bracket KitPart Number: DFP-SURFACE (galvanized) DFP-SURFACESS (stainless steel)

Cable Hang KitPart Number: DFP-CABLE (zinc coated)QTY 2 cables with toggle endsand QTY 2 self locking gripples

52 1/4” between chains

Pendant Style Mounting (standard) NOTE: Conduit provided by others

Fixture suspended with 1/2” electrical conduitusing top hubs on fixture at both ends. 45” between conduit

Chain Hang KitPart Number: DFP-CHAIN

Bracket attachment point for optional mounting methods




































hazardous location linear fluorescent …tnblnx3.tnb.com/emalbum/albums//us_resource/gm7236_hazlux...

Documents