HD book cameraHuge battery camera series

Please ensure that you read the complete user manual carefully before using any part of the product.- Keep this copy safe for future reference in case of operational difficulties.- Please test the position/angle, playback the video in advance, to make sure it could catch what you want- Please do not use this camera for il legal purpose. It is important to follow the laws in your country/state

-

MODEL NO: DV9

USER MANUAL

Safety instructions

2

- Ensure that the camera is tested for the first time use and

confirm that it suits the intended purpose.

- We are not responsible for any missing video information due to

wrong operation,Micro-SD malfunctioning or camera angle limit

etc.

- The camera should be used for legal purpose only. Check and

follow the laws provided in your country regarding the use of

camera and other video recording devices.

By following the above safety instructions, we hope that it will be

enjoyable to own and use this product!

Please read the following instructions before using the camera:

It is important to note that:

is not included in the above list of accessories, contact us as soon as possible at: support@conbrov.com

If there is anything missing in your product package and it

Product accessories

3

Camera ManualUSB cable

HD book cameraHuge battery camera series

Please ensure that you read the complete user manual carefully before using any part of the product.- Keep this copy safe for future reference in case of operational difficulties.- Please test the position/angle, playback the video in advance, to make sure i t could catch what you want- Please do not use this camera for i l legal purpose. I t is important to follow the laws in your country/state

-

MODEL NO: DV9

USER MANUAL

Product structure

4

Camera lens

LED

RECOFF

Indicator

Micro-SD

USB

MD

PIR

Audio(on/off)

Reset

Detection ability

Important Notice:- Please use the camera in a perpendicular direction and camera lens on the top as the above photo shown and do not use the camera upside down or lay down- Avoid using the camera in hot or extreme temperatures that will reduce the motion detection accuracy- When the camera is in motion detection mode,there's a 2 seconds delay upon each trigger to start video recording.So pls avoid using the camera in somewhere people passing quick- When the camera is set to the motion detection mode,it will record a first file about 2 minutes before it went into motion detection standby status.

5

PIR Detection angle60

15-25feet(5-8meters)

Camera angle75

Charging information

Important Notice:- It is suggested to charge it by a 1A USB powr adaptor using the provided USB cable from the package.

6

- Connect with PC as a U-disk:please push the button to the REC first, then connect the camera to the computer via the USB cable.

- It is suggested to slide the power switch to be OFF at the center during charging the camera.

-You also can charge the camera by connecting it with a PC USB

port via the USB cable. please make sure that the camera is

power off for charging.(push the button to OFF for charging)

The yellow will stay on. It will be off when it is fully charged

The yellow indicator will stay on, the blue and red indicator will flash.

How to install and remove micro-sd card

Important notice:- The camera has the ability to record video only when Micro-SD is inserted.- Please avoid by all means to insert or remove Micro-SD when the camera is either powered ON or connected to the computer. This can possibly cause damage to Micro-SD or the entire camera.- Please ensure that minimal effort is applied to the Micro-SD when inserting it in or out of the camera. Use of force can easily damage the Micro-SD or the product parts.- Before using the product for the first time, ensure that the Micro-SD is formatted. Please check for any saved data in the Micro-SD to avoid unexpected loss.The camera support micro sd card up to 32GB only,class 10 above quality card suggested for a good video quality.We are not liable or responsible for malfunctions that result from failure to follow the above guidelines.

Remove Micro-SDInstall Micro-SD card

7

Time and date setting

8

2.Open the file and amend some of the number according to your required time, but do not amend any other data or file format.

YW_TIME.txt.

3.After finishing the amendment, please click the upward left side file in the dialog box, and then click “ save”.

New

Open

Save

Save as

Page settings

Print

Exit

file Edit Format View Help1

2

The time will be synchronized when camera disconnects with computer and then power on the camera.

Time modificationIt will automatically create a time file named as YW_TIME.txt.document after the camera is switched on. The time will be amended to the current time when you open the document and save it. Exit the portable disk and restart the camera and record, new recording videos will automatically synchronize with the

current time.

1.Open the portable disk, you will find the YW_TIME.txt.

YW_TIME.txt

YW_TIME. txt

file Edit Format View Help

File name

yyyy/mm/dd 2015/03/23

23:15:12

yes

hh:mm:ssyes:auto-recycle the SDno:no auto-recycling

[date]

YW_TIME. txt

Operation guide

4.When you find your camera power off automatically,there're two reasons for that: 1) The power is too low,you need to recharge the camera. 2) No memory card installed or memory card is full when camera set to no loop recording.

Important Note:1.If you didn't find the file when you open the micro sd card from your computer,Pls record a video clip using the camera to activate the card and then try to set the date and time again.2.The amended date and time will not change unless the battery is running out for long time.3.When your camera is malfunction or wrong operation,pls using a toothpick to hold on the reset hole to reset the camera.

YW_TIME.txt.

9

Detailed parameters

10

ParameterItem

size 21*15*4CM

Product net weight 415g

Battery

Stand-by power consumption 10uA

PIR detection angle 60 degrees

PIR detection distance 5-8 meters

Camera angle about 75 degrees

Max PIR stand-by time 2 years

Day time recording power consumption 220mA

Max day time recoridng time a b out 30 hours

Night vision recording power consumption 820mA

Max night vision continuously recording time 9-10 hours

a b out 20 hours by 2A USB power Full-Charging time adaptor

Resolution 1 0 8 0 P

FPS 30FPS

PIR MD video record about 1 minute per file

Record continuously about 2 minutes per file

Max SD storage 32GB

Loop recording optional

10000mAh

Indicator status and meanings

IMPORTANT REMINDINGS: PLS DON'T PUT SD OUT DURING RECORDING OR IT COULD POSSIBLY CAUSE DAMAGE TO SD. WHEN THE BATTERY IS RUNNING OUT, IT WILL SAVE THE LAST FILE AND POWER OFF

Switch to REC

Switch to MD

NO SD

Low battery

SD full(if it is not auto-recycling)

Charging the camera

Full charged

Connect with PC as a U-disk When connect with PC and power on the camera to either REC or MD

The blue flash 3 times and goes off, it will record continuously by 2 minutes video each

The red and blue flash once, then the red flash 3 times and goes off

The blue will flash for 10 seconds and it powers off

The red and blue will flash for 10 seconds and it powers off Or sometimes battery is totally running out, it could not power on at all.

The red and blue will flash for 10 seconds and it powers off

The yellow stays on(Suggested to put the switcher to OFF when charging)

The yellow be off

The yellow will stay and the blue&red will flash

11

Motion detected

The red&blue flash once and red will flash 3 times and goes off. It will save to SD for about each 1 minute video

Email: Support@conbrov.comWebsite: www.conbrov.com