helen schedule 2

BID DOCUMENT 7 STOREY SHOPS AND OFFICE BUILDING

ADDIS MEBRATU Consulting Architects and EngineersPO.Box 43194 Addis Ababa EthiopiaTel -0115545383 -0115159652Cell -0911229341

SUMMARY OF PRICES

1 SITEWORKS BIRR _______________

2 CONCRETE WORKS BIRR _______________

3 MASONRY WORKS BIRR _______________

4 THERMAL AND MOISTURE PROTECTION BIRR _______________

5 DOORS AND WINDOWS BIRR _______________

6 FINISHES BIRR _______________

7 SANITARY/ MECHANICAL BIRR _______________

8 ELECTRICAL BIRR _______________

TOTAL SUMMARY BIRR _______________

Provision for contingency 10% BIRR _______________

Total estimated project cost BIRR _______________

15% VAT

Grand Total _______________

Commercial Bank of EthiopiaPaulos Branch Office Building Project

Addis Mebratu Consulting Architects and Engineers of 148

ITEM DESCRIPTION UNIT QTY. June July Augest SEP OCT

DIVISION 1 SITE WORK 1` EARTHWORK Demolishing work

1.01 400

1.01 - 1 Excavation support and protection

980

Excavation work

1.02 975

1.03 975

1.04 975

1.05 975

1.06 358

Disposal

1.07 4,258

Demolish the existing foundation base and dispose the debris to appropriate place as per the Engineer order.

m2

Design, supply and install support for the required depth of excavation wherever required.Design is to be performed by a qualified engineer who has ample experience in design of excavation support and whose design has been installed with successful performance. The supply and installation shall include, but not limited to, reinforced bored cast-in-situ piles including concrete and reinforcement permanent grouted anchor including all accessories, proof testing of working anchors to an acceptable test load, and reinforced shotcrete membrane to be installed between shoring piles.

m2

Bulk Excavation of Ordinary Soil to a depth of 1500mm below existing ground surface.

m3

Bulk Excavation of Ordinary Soil from a depth of 1500mm below existing ground surface to a depth of 3000mm.

m3

Excavate in Soft Rock from a depth of 3000mm below existing ground surface to a depth of 4500mm.

m3


m3


m3

Cart away surplus excavated materials to a distance not exceeding 10km from site.

m3




Fill

1.08 372

1.09 Ditto as item 1.07 but under second basement slab 484

1.10 Ditto as item 1.07 but around retaning wall 681Hard core

1.11 650

Total Division 2 (Carried to Summary).DIVISION 2 CONCRETE WORK

CONCRETE WORKSSUBSTRUCTURE

2.01

a Under Matt Foundation 651

b Under basement slab 651

2.02

a In Matt Foundation 943

b In Columns extending from matt to bottom of 2nd basement beams 10

c In Shear Walls extending from matt to bottom of 2nd basement beams 28

2.03 Provide cut & fix in position formwork.a To Matt Foundation 149

b To Columns extending from matt to bottom of 2nd basement beams 66

c To Shear Walls extending from matt to bottom of 2nd basement beams 230

2.04

d f 16 mm. deformed bar Kg 0e f 20 mm. deformed bar Kg 29,639.00 f f 24 mm. deformed bar Kg

Second Basement

Fill over excavated ground up to the bottom level of the lean concrerte with satisfactory soil (Selected Material) conforming to ASTM D 2487 soil classification groups GW, GP, GM, SW, SP, and SM, or a combination of these group symbols; free of rock or gravel larger than 3 inches (75 mm) in any dimension, debris, waste, frozen materials, vegetation, and other deleterious matter and a swell potential of less than 3%.

m3

m3

m3

Hard basaltic or equivalent stone hard core under slab on grade, well rolled consolidated and blinded with crushed stone to a finished thickness of 25cm

m2

5cms.thick lean concrete in class C-5 with minimum cement content of 150kg /m3

m2

m2

Reinforced concrete in class C-25, with minimum cement content of 360kg/m3 filled in into formwork and vibrated around steel reinforcement. Steel and formwork measured separately:-

m3

m3

m3

m2

m2

m2

Steel reinforcement for use in Second Basement Concrete works with a minimum yield strength Fyk of 400MPa. Reinforcement shall be according to Structural Drawings and Technical Specifications. Price includes cutting bending, placing in position and tying wires.




2.05

a In 10cm thick Basement Slabs 65

b 29

c In Basement Beams 26

d 89

e In Vehicular Ramp 13

f 3

2.06 Provide cut & fix in position formwork.

a 208

b To Basement Beams 257

c 726

d To Vehicular Ramp 78

e 14

2.07

a f 8 mm. deformed bar Kg 1380b f 10 mm. deformed bar Kg 1227c f 12 mm. deformed bar Kg 1974d f 14 mm. deformed bar Kg 6410e f 16 mm. deformed bar Kg 420f f 20 mm. deformed bar Kg 2059g f 24 mm. deformed bar Kg 2499

First Basement

2.08

a In 17cm thick Basement Slabs 100

b 29

c In Basement Beams 42

d 89

e In Vehicular Ramp 13

f 3


Reinforced concrete in class C-25, with minimum cement content of 360kg/m3 filled into formwork and vibrated around steel reinforcement. Steel and formwork measured separately:-

m3

In Columns extending from Second Basement to bottom of First Basement beams

m3

m3

In Shear Walls extending from Second Basement to bottom of First Basement beams

m3

m3

In Stairs Extending From Second Basement to bottom of First Basement beams

m3

To Columns extending from Second Basement to bottom of First Basement beams

m2

m2

To Shear Walls extending from Second Basement to bottom of First Basement beams

m2

m2

To Stairs extending from Second Basement to bottom of First Basement beams m2

Steel reinforcement for use in First Basement Concrete works with a minimum yield strength Fyk of 400MPa. Reinforcement shall be according to Structural Drawings and Technical Specifications. Price includes cutting bending, placing in position and tying wires.


m3

In Columns extending from First Basement to bottom of Ground Floor beams

m3

m3

In Shear Walls extending from First Basement to bottom of Ground Floor beams

m3

m3

In Stairs Extending From First Basement to bottom of Ground Floor beams

m3




a To 17cm thick Basement Slabs 588

b 205

c To Basement Beams 365

d 726

e To Vehicular Ramp 78

f 14

2.10

a f 8 mm. deformed bar Kg 2498b f 10 mm. deformed bar Kg 2112c f 12 mm. deformed bar Kg 2653d f 14 mm. deformed bar Kg 2426e f 16 mm. deformed bar Kg 3263f f 20 mm. deformed bar Kg 5135g f 24 mm. deformed bar Kg 5520

CONCRETE WORKSSUPERSTRUCTURE

2.11

b In Columns extending from Ground Floor to bottom of First Floor beams 29

d 9


b To Columns extending from Ground Floor to bottom of First Floor beams 205

c To Ground Floor Beams 270

d 90

e To Stairs extending from Ground Floor to bottom of First Floor beams 108

2.13

a f 8 mm. deformed bar Kg 2094b f 10 mm. deformed bar Kg 1141c f 12 mm. deformed bar Kg 1869d f 14 mm. deformed bar Kg 4709e f 16 mm. deformed bar Kg 2600

m2

To Columns extending from First Basement to bottom of Ground Floor beams

m2

m2

To Shear Walls extending from First Basement to bottom of Ground Floor beams

m2

m2

To Stairs extending from First Basement to bottom of Ground Floor beams

m2

Steel reinforcement for use in First Basement Concrete works with a minimum yield strength Fyk of 400MPa. Reinforcement shall be according to Structural Drawings and Technical Specifications. Price includes cutting bending, placing in position and tying wires.


m3

In Shear Walls extending from First Ground Floor to bottom of First Floor beams

m3

m2

m2

To Shear Walls extending from Ground Floor to bottom of First Floor beams

m2

m2

Steel reinforcement for use in Ground Floor concrete works with a minimum yield strength Fyk of 400MPa. Reinforcement shall be according to Structural Drawings and Technical Specifications. Price includes cutting bending, placing in position and tying wires.




f f 20 mm. deformed bar Kg 7118g f 24 mm. deformed bar Kg 437

First Floor

2.14

a In Columns extending from First Floor to Mezzanin Floor. 25

b In Ground Floor Beams 36

c In Shear Walls extending from First Floor to Mezzanin Floor. 9

d In Stairs Extending From First Floor to Mezzanin Floor. 212.15 Provide cut & fix in position formwork.

a To First Floor Slabs 588

b To Columns extending from First Floor to Mezzanin Floor. 159

c To First Floor Beams 132

d To Shear Walls extending from First Floor to Mezzanin Floor. 90

e To Stairs extending from First Floor to Mezzanin Floor. 49

2.16

a f 6 mm. deformed bar Kg 1888b f 8 mm. deformed bar Kg 2481c f 10 mm. deformed bar Kg 551d f 12 mm. deformed bar Kg 889e f 14 mm. deformed bar Kg 2544f f 16 mm. deformed bar Kg 2318g f 20 mm. deformed bar Kg 5712h f 24 mm. deformed bar Kg 4717

Mezzanine Floor

2.17

a In Columns extending from Mezzanine Floor to Second Floor beams 25

b In Mezzanine Floor Beams 40

c In Shear Walls extending from Mezzanine Floor to Second Floor beams 9

d In Stairs extending from Mezzanine Floor to Second Floor beams 102.18 Provide cut & fix in position formwork.

a To Mezzanine Floor Slabs 549

b To Columns extending from Mezzanine Floor to Second Floor beams 159

c To Mezzanine Floor Beams 134

d To Shear Walls extending from Mezzanine Floor to Second Floor beams 90


m3

m3

m3

m3

m2

m2

m2

m2

m2

Steel reinforcement for use in First Floor concrete works with a minimum yield strength Fyk of 400MPa. Reinforcement shall be according to Structural Drawings and Technical Specifications. Price includes cutting bending, placing in position and tying wires.


m3

m3

m3

m3

m2

m2

m2

m2




e To Stairs extending from Mezzanine Floor to Second Floor beams 49

2.19

a f 6 mm. deformed bar Kg 1433b f 8 mm. deformed bar Kg 1917c f 10 mm. deformed bar Kg -d f 12 mm. deformed bar Kg 422e f 14 mm. deformed bar Kg 1962f f 16 mm. deformed bar Kg 1470g f 20 mm. deformed bar Kg 5167h f 24 mm. deformed bar Kg 4190

Second Floor

2.20

a In Columns extending from Second Floor to Third Floor beams 25

b In Second Floor Beams 40

c In Shear Walls extending from Second Floor to Third Floor beams 9

d In Stairs extending from Second Floor to Third Floor beams 102.21 Provide cut & fix in position formwork.

a To Second Floor Slabs 588

b To Columns extending from Second Floor to Third Floor beams 159

c To Second Floor Beams 134

e To Stairs extending from Second Floor to Third Floor beams 49a f 6 mm. deformed bar Kg 9353c f 10 mm. deformed bar Kg -e f 14 mm. deformed bar Kg 2064f f 16 mm. deformed bar Kg 1208g f 20 mm. deformed bar Kg 5760h f 24 mm. deformed bar Kg 4813

m2



m3

m3

m3

m3

m2

m2

m2

m2




Third Floor

2.23

a In Columns extending from Third Floor to Fourth Floor beams 25

b In Third Floor Beams 40

c In Shear Walls extending from Third Floor to Fourth Floor beams 9

d In Stairs extending from Third Floor to Fourth Floor beams 32.24 Provide cut & fix in position formwork.

a To Third Floor Slabs 588

b To Columns extending from Third Floor to Fourth Floor beams 159

c To Third Floor Beams 134

d To Shear Walls extending from Third Floor to Fourth Floor beams 90

2.25

b f 8 mm. deformed bar Kg 2619d f 12 mm. deformed bar Kg 408e f 14 mm. deformed bar Kg 2064f f 16 mm. deformed bar Kg 1208g f 20 mm. deformed bar Kg 5760h f 24 mm. deformed bar Kg 4813

Fourth Floor

2.26

a In Columns extending from Fourth Floor to Fifth Floor beams 25

b In Fourth Floor Beams 40

c In Shear Walls extending from Fourth Floor to Fifth Floor beams 9

d In Stairs extending from Fourth Floor to Fifth Floor beams 32.27 Provide cut & fix in position formwork.

a To Fourth Floor Slabs 588

b To Columns extending from Fourth Floor to Fifth Floor beams 159

c To Fourth Floor Beams 134

d To Shear Walls extending from Fourth Floor to Fifth Floor beams 90e To Stairs extending from Fourth Floor to Fifth Floor beams m2 14

2.28

a f 6 mm. deformed bar Kg 1295b f 8 mm. deformed bar Kg 2619c f 10 mm. deformed bar Kg -d f 12 mm. deformed bar Kg 408


m3

m3

m3

m3

m2

m2

m2

m2



m3

m3

m3

m3

m2

m2

m2

m2





e f 14 mm. deformed bar Kg 2064f f 16 mm. deformed bar Kg 1208g f 20 mm. deformed bar Kg 5760h f 24 mm. deformed bar Kg 4813

Fifth Floor

2.29

a In Columns extending from Fifth Floor to Sixth Floor beams 25

b In Fifth Floor Beams 40

c In Shear Walls extending from Fifth Floor to Sixth Floor beams 9

d In Stairs extending from Fifth Floor to Sixth Floor beams 32.30 Provide cut & fix in position formwork.

a To Fifth Floor Slabs 588

b To Columns extending from Fifth Floor to Sixth Floor beams 159

c To Fifth Floor Beams 134

d To Shear Walls extending from Fifth Floor to Sixth Floor beams 90

e To Stairs extending from Fifth Floor to Sixth Floor beams 14

2.31


Sixth Floor

2.32

a In Columns extending from Sixth Floor to Seventh Floor beams 25

b In Sixth Floor Beams 40

c In Shear Walls extending from Sixth Floor to Seventh Floor beams 9

d In Stairs extending from Sixth Floor to Seventh Floor beams 32.33 Provide cut & fix in position formwork.

a To Sixth Floor Slabs 588

b To Columns extending from Sixth Floor to Seventh Floor beams 159

c To Sixth Floor Beams 134

d To Shear Walls extending from Sixth Floor to Seventh Floor beams 90

e To Stairs extending from Sixth Floor to Seventh Floor beams 14


m3

m3

m3

m3

m2

m2

m2

m2

m2



m3

m3

m3

m3

m2

m2

m2

m2

m2




2.34


Seventh Floor

2.35

a In Columns extending from Seventh Floor to Top Roof beams 25

b In Seventh Floor Beams 40

c In Shear Walls extending from Seventh Floor to Top Roof beams 9

d In Stairs extending from Seventh Floor to Top Roof beams 32.36 Provide cut & fix in position formwork.

a To Seventh Floor Slabs 588

b To Columns extending from Seventh Floor to Top Roof beams 159

c To Seventh Floor Beams 134

d To Shear Walls extending from Seventh Floor to Top Roof beams 90

e To Stairs extending from Seventh Floor to Top Roof beams 14

2.37


Top Roof

2.38

a In Roof Slabs 66

b In Columns extending from Top Roof to Lift Room 4

c In Seventh Floor Beams 32



m3

m3

m3

m3

m2

m2

m2

m2

m2



m3

m3

m3




d In Shear Walls extending from Top Roof to Lift Room 9

e In Parapet walls 142.39 Provide cut & fix in position formwork.

a To Seventh Floor Slabs 486

b To Columns extending from Top Roof to Lift Room 24

c To Roof Beams 158

d To Shear Walls extending from Top Roof to Lift Room 90

e To Parapet walls 222

2.40

a f 8 mm. deformed bar Kg 668b f 10 mm. deformed bar Kg 1042c f 12 mm. deformed bar Kg 3794d f 14 mm. deformed bar Kg 3089e f 16 mm. deformed bar Kg 1402f f 20 mm. deformed bar Kg 5710g f 24 mm. deformed bar Kg -

Total Division 2 (Carried to Summary). DIVISION 3 - MASONRY WORK

MASONRY WORKSSUPER STRUCTURE

3.01 2477

3.04 30cm thick Ribbed Block Slab 3968Total Division 3 (Carried to Summary).

m3

m3

m2

m2

m2

m2

m2


15cm thick Reinforced concrete Masonry Unit (CMU) wall made from CMU conforming to ASTM C90 with a unit compressive strength of 13Mpa. The CMU shall be bedded in Mortar conforming to ASTM C 270 and left for plastering on both sides.

m2

m2




DIVISION 4 - METAL WORK

METAL WORKS

4.01 No 1

Total Division 4 (Carried to Summary).

Circular metal fire escape stair or flight width radius not less than 100cm.price shall include steel structure and all fixing accessories and alpholic or equivalent perforated aluminium composite panel wrapped around the circular fire escape stair through out its height.




DIVISION 5 - THERMAL AND MOISTURE PROTECTIONBITUMINOUS DAMPPROOFING

5.01

a Sides of Retaining Walls on the Second Basement 681CEMENTATIONS WATERPROOFING

5.02 509

5.03 532

Total Division 5 (Carried to Summary).DIVISION 8 - DOORS AND WINDOWS

DOORS AND WINDOWSFLUSH WOODEN DOORS

8.01

1 WD1 Size (800 x 2100mm) No 3FLUSH DOORS

8.02

1 MD1 Size ( 1400 x 2100 mm) NO 3

2 MD2 Size ( 1400 x 2150 mm) NO 1

3 MD7 Size ( 1000 x 2150 mm) NO 8

8.03

1 MD3 Size ( 1400 x 3150 mm) NO 8

3 MD6 Size ( 1800 x 3150 mm) NO 1

8.04

Apply two uniform coats of Hot-Applied Asphalt Dampproofing complying with the requirements of ASTM D 449, Type 1 by mopping or spraying at not less than 1L/sqm for each coat. Apply dampproofing at the following locations

m2

Light weight concrete attaining 2% slope with a minimum thickness of 7cm. m2

Prepare Surface and apply two slurry coats of Xypex or equivalent cementations waterproofing according to the manufacturers instruction.

m2

Price shall include frames hard wood lippings and edgings at sides,top and bottom and 12cm high kick plate including the necessary iron monger and cylinderical lock of ASSA or equivalent certified European standard.

Double Assymetric Leaf Single Swing Tubular Framed Hollow Metal Fire Rated Flush Door. Price shall include frames hard wood lippings and edgings at sides ,top and bottom and 12cm high kick plate including the necessary iron monger and cylindrical lock of ASSA or equivalent certified European standard.

Double Assymetric Leaf Single Swing Sylinderical Hollow Metal Grill Door. Price shall include frames hard wood lippings and edgings at sides ,top and bottom and 12cm high kick plate including the necessary iron monger and cylindrical lock.

Provide Commercial Bank of Ethiopia and manufacturer's standard Door for Strong Room.




8.05

2 SD3 Size ( 3000 x 2150 mm) NO 1

4 SD5 Size ( 700 x 2150 mm) NO 16

5 SD6 Size ( 700 x 2150 mm) NO 16

6 SD7 Size ( 700 x 2150 mm) NO 8

7 SD8 Size ( 700 x 2150 mm) NO 1

Double Leaf Single Swing Tubular Hollow Framed Aluminium Flush Door. Price shall include frames hard wood lippings and edgings at sides ,top and bottom and 12cm high kick plate including the necessary iron monger and cylindrical lock of ASSA or equivalent certified European standard.




8 SD9 Size ( 1000 x 2150 mm) NO 1

9 SD10 Size ( 1000 x 2150 mm) NO 4

10 SD11 Size ( 1000 x 2150 mm) NO 1

11 GD1 Size ( 1400 x 2150 mm) NO 1

12 GD2 Size ( 1800 x 800 mm) NO 29

13 GD3 Size ( 900 x 2150 mm) NO 8

14 GD4 Size ( 900 x 2150 mm) NO 71

8.06

2 GW2 Size ( 600 x 1000 mm) NO 3

3 GW3 Size ( 11600 x 5000 mm) NO 1

4 GW4 Size ( 800 x 1400 mm) NO 17

8.07

1 SD2 Size ( 6900 x 4600mm) NO 1

8.08 ml 80

GLAZING

8.09 487

GLAZED ALUMINUM CURTAIN WALL

8.10 948

Total Division 8 (Carried to Summary).DIVISION 11 - FINISHES

PORTLAND CEMENT PLASTER

Windows shall be fabricated from anodized aluminum frames. Price includes best quality iron monger of certified European standard all according to detail drawings and specifications and including the necessary iron monger.

Overhead Aluminium coiling door to shop doors fabricated, fixed in place and painted in three coats of synthetic enamelled paint.

Construct bank counter made of Aluminium frame and allophonic or equivalent aluminium composite panel cladding and 10mm thick tempered clear glass as per the architectural detail drawing.price includes 10mm thick tempered glass and all necessary fixing accessories,triming,cutting,and chamfering the glass.

Supply and fix 6mm thick clear reflective glass Heat Strengthened Glass lites of certified European standard.

m2

Curtain wall made of concealed aluminum frame , but single glazed 6mm thick clear reflective tempered as shown on the drawings AR 158. The spandrel panel will be in 6mm clear reflective glass externally alpolic or equivalent composite panel internally. Price shall include glazing and the supply and fixing of the curtain wall which shall be subject to approval of shop drawings from the manufacturers.

m2




9.01

a To Internal Wall Surfaces 3267

b Ditto but to concrete ceiling 4329

c Ditto but to Column surfaces 1706

d Ditto but to stair soffit 231

e Ditto but to Parapet walls 1119.02 Apply two coats of plaster in cement to receive other finishes:

a To receive ceramic tiles 240

9.03 196

9.04 217

9.05 10

9.06 Bush Hammered RC Concrete Wall 13

9.07 2517

9.08 RESILIENT FLOOR TILESa 2mm thick homogenous vinyl floor covering . 575b Ditto but wall base (Skirting) in floor covering material . ml 223

9.09 CERAMIC/PORCELAIN TILES

a 1156

Supply prepare and apply two coats of Portland cement plaster to internal wall, Column surfaces, Shear walls, Stair soffit, Parapet walls internal part of retaining walls and ceiling surfaces where indicated on the drawings and in accordance with the technical specifications. The proportioning of the first two coats (Base Coats) shall be as indicated on the specs. The third coat (Finish Coat) shall be Stucco Finish Coat complying with stucco manufacturer's written instructions. Portland Cement Shall comply with the requirements of ASTM C 150, Type I. Sand Aggregates for Base Coats shall comply with the requirements of ASTM C 897. Stucco Finish Coat shall be manufacturer's standard factory-packaged stucco, including Portland cement, aggregate, coloring agent, and other proprietary ingredients.

m2

m2

m2

m2

m2

m2

Gypsum Partition wall measured elsewhere. Price includes structural galvanized sheet structural frame and accessories.

m2

10mm thick 100x2000mm Tid Wood Toungue & Groove Wall Cladding. Pattern according to architectural drawings.

m2

300 x 600x10mm Harrar Juparana Granite Wall Cladding. Color and pattern according to architectural drawings.

m2

m2

Alpolic or equivalent Aluminium Composite Panel Wall Cladding and protruding sun breakers. m2

m2

RAK or equivalent European certified ceramic wall tiles as scheduled below and according to the technical specifications fixed to plastered wall surface on and including cement mortar backing and white cement wash grouting. Color to match floor tiles and pattern according to architectural drawing.

m2




b 356

c Ditto but 40x40cm Non Slipery Porceline Floor Tiles 406

d Ditto but wall base (Skirting) in floor covering material . ml 215

9.10 DIMENSION STONE TILESa Ditto but 300 x 600 x 10mm Harar Juparana. 240

b 741

c Ditto but wall base (Skirting) in floor covering material . ml 105

d 229

f Ditto but Tekeze Black10cm high & 2cm thick skirting 20

h 3cm thick Cast insitu Granolotic flooring for landings & stair lobbies 895

j ml 312

73

b Ditto but 10cm high skirting 126

c trowel smooth finishing to concrete floors 1064

9.12 WOODEN FLOORING

a 168

b Ditto but 10cm wide & 1.5cm thick skirting ml 107

c 1114

d Ditto but 10cm wide & 1.5cm thick skirting ml 314

ALUMINUM TILE CEILING

9.13

a 600x600cm aluminium Suspended Cieling. 208

PAINTING10.01 Apply three coats of approved type plastic emulsion paint .

a To internal plastered wall surface. 3267

b Ditto but to concrete ceiling. 4330

Best quality non-slippery ceramic/porcelain floor tiles as scheduled below and according to the technical specifications bedded in cement sand mortar, price includes mortar and grouting:

m2

m2

m2

Best quality 40x40x2cm Polished Harrar Juparana Granite floor tiles as scheduled below and according to the technical specifications bedded in cement sand mortar, price includes mortar and grouting:

m2

32cm wide & 3cm thick Polished Harrar Juparana stair tread with bull nosed edges bedded in cement sand mortar mix (1:3)

m2

m2

m2

28cm wide alpolic or equivalent, aluminum composite window sill color golden bronze or according to architects choice.

20 x 20cm class "A" terrazzo floor tiles bedded in cement sand mortar mix (1:3)

m2

m2

m2

10mm thick solid oak wood parquet flooring beded on 40mm thick cement screed with cement sand mortar mix (1:3)

m2

9mm thick tongue and grooved HDF wood parquet flooring with built up rubber cushion of approved European standard bedded on 40mm thick cement screed with cement sand mortar mix (1:3)

m2

Provide manufacturer's standard tiles as scheduled below and according to the technical specifications with configuration indicated that comply with ASTM E 1264 classifications as designated by types, patterns, acoustical ratings, and light reflectance's. Supply tiles complete with factory suspension system indicated.

m2

m2

m2

C371

addis:




c Ditto but to Column surfaces. 1706

d Ditto but to stair 231

g Ditto but to parapet 111Total Division 9 (Carried to Summary).

m2

m2

m2




SANITARY INSTALLATION11.1 SANITARY EQUIPMENT (FIXTURES)

11.1.1 No 44

11.1.2 No 36

11.1.3 No 36

11.1.4 No 44

11.1.5 No 44

DIVISION 11 - SANITARY AND MECHANICA INSTALLATIONS

All fixtures which differs from that specified below is subject to the owner's approval, based on samples,catalogues and brochures presented by the contractor.Unit Price shall include all the necessary fixing brackets or hooks and all assistnace civil works such as chiselling of walls, floors,beams and etc.

Supply ,fix,test & commission hand wash basins made of white vitreous china with chrom plated lever operated cold water tap, Complete with plug , P-smell trap with connection pipes and all other necessary accessories.

Supply and fix wash down water closets made of white vitreous china with plastic seat cover and including low flush cistern.Complete with all necessary accessories.

Supply and fix toilet paper holder made of white vitreous china,recessed to wall complete with all necessary accessories

Supply and fix crystal glass mirrors for toilets hand wash basins with copper back protection, size 500/400 mm including chrome plated brass mirror clips with chrome plated screws. Price shall also include approved quality shelves.

Supply and fix soap holder made white vitreous china,recessed to wall of size150 x 150 mm. Complete with the necessary fixing and other accessories for hand wash basins & price shall include all civil works.




11.1.6

Type ------ NAFFCO or equivalent Model ---- RACK CABINET-NFR/750 Colour----To Architect's preference No 11

11.1.7

Capacity: 100liter No 1 50 liter No 2

11.1.8 No 2

11.1.9 No 2

Size: 700 x 700 mm 1.2 Plumbing Water Supply System

1.2.1

slabs

Supply, fix, test, and commission recessed type stainless steel fire hose reels complete with rack cabinet,glass door,30m long with 32mm diameter canvas hose, bronze adjustable fog nozzle, angle valve with built in pressure reducer, hose rack, fire extinguishers 6Kg dry powder or clean agent and necessary accessories all as per the manufacturer's instruction and shown on the drawings.

Supply and fix water heater of approved quality, completewith insulation, one way & safety valves, chrome gate valves on cold and hot water connection pipes. Price shall include all fixing accessories.

Supply and fix stainless steel kitchen sink with double bowl as where shown on the drawing. Complete with the necessary fixing and other accessories./Sinks shall be from pure stainless steel & quality shall be approved by submitting manufacturer's technical specification & catalogues/

Supply and fix shower units made of enameled cast iron, or equivalent complete with approved quality flexible shower head, lever acion cold & hot water mixer/trp/ & hanger,P-smell trap and with all other necessary accessories.

Supply, install, test,disinfect and commissioning domestic water supply medium grade galvanized steel piping, including pipe fittings, supports,anchors and painting where required, cutting and making of chases on walls (if necessary) and necessary accessories, all as specified in the technical specification and shown on the drawings.

Cold Water Piping through ducts & cabinets, ceiling walls & below




a) dia.15mm Pipe ml 110 b) dia.20 " " ml 180 d) dia.32 " " ml 7 e) dia.40 " " ml 10 f) dia.50 " " ml 20 g) dia. 65mm ml 100

11.2.2

Dia. 50 mm ml 18

11.2.3

Dia. 15 mm/bronze No 84

1.2.4

a) dia.20 No 5 b) dia.25 No 6 c) dia.32 No 3

11.3 WATER TANKS AND ACCESSORIES

fiber glass fire & domestic water storage tanks , Pumps

and accessories sanitary installations.

11.3.1 Fiber Glass Water tanks and accessories on basement

Supply,mount,test & commission fiber glass water Tanks for water storage (Fire & domesticwater supply ) tanks.Complete with:

- 600x600mm properly hinged access door -dia.100mm insect proof air vent pipe

Supply and install medium grade galvanized steel pipes to fire water distribution system as shown on the drawing. Complete with all the necessary fittings and accessories.Price shall include painting of red color on all exposed pipes .

Supply, fix, test, and commission European standard service valves on the water supply pipe before sanitary appliances including all accessories, as specified in the technical specification and shown on the drawings.

Ditto to item number 1.2.3 approved quality bronze gate valves on pipe lines above ceiling , internal branch water pipes of the following sizes and as where shown on the drawing.

- All connecting pieces & flanges (On drain, over flow, suction pipes)




No 2

No 2

i - Supply, install, test and commision the following on fire fighting water storage tanks - 50mm dia. float valve No 2

- 50mm dia. G.S.Pipe suction pipe /galvanized steel ml 2

- 50mm dia. G.S.Pipe drain pipe with gate valve/brass No 2

- 50mm dia. G.S.Pipe over flow pipe ml 2 - 50mm dia. gate valve on suction pipe/brass No 2

No 1

ii - Supply, install, test and commision the following on domestic water tanks - 50mm dia. float valve No 2


- 50mm dia. G.S.Pipe drain pipe with gate valve/brass No 2

- 50mm dia. G.S.Pipe over flow pipe ml 2 - 50mm dia. gate valve on suction pipe/brass No 2 - Automatic level control swith in one of the water tanks,including electrical wiring No 1

No 1

11.3.2 Fiber Glass Water tanks and accessories on roofa - Fiber Glass water tank

water use on the roof.

a - Fiber glass water tanks :(On basement floor) i - Municipal water storage tank for fire fighting in basement

Capacity : 15m3

ii - Municipal water storage tank for domestic water use in basement

Capacity:8m3

b - Accessories

- Dia.65mm brass gate valve on connecting pipe /two tanks/.Price include connecting pipe work to /1.5meter length pipe/

- Dia.65mm brass gate valve on connecting pipe /two tanks/.Price include connecting pipe work to /1.5meter length pipe/

i - Ditto to item1.3.1 /basement water tanks/,water storage tank for domestic




Size: 3m3 No 2

i - Supply, install, test and commission, the followings on domestic water tanks on the roof.

connection to basement centrifugal water pump. No 1 - dia65mm gate valve on drain pipe No 2 - dia.65mm G.S.Pipe drain pipe ml 2 - dia65mm G.S.Pipe over flow pipe ml 2 - dia.50mm gate valve after tank No 3 - dia.65mm gate valve before tanks No 2

11.4 Domestic & Fire Pumps

11.4.1

Capacity: Q= 4 liter/Second H= 46meter No 2

11.4.2

The pumps consists of the following :-

H= 46meter

H= 46meter

H= 46meter Set 111.5 WASTE, VENT AND STORM WATER PIPES AND

ACCESSORIES

b - Accessories

- Automatic level control switch, price include electric wire

Supply,install,test and commission europe manufactured & approved ,centrifugal cold water booster pumps(i.e one stand by and one duty) on basement to roof

water tanks as shown in the drawing.Complete with check & gate valves,piping,electrical control system and all required accessories.

Supply,install,test & commissione europe manufactured & approved quality factory assembled & testedautomatic fire pumps set(i.e one diesel driven stand by , electric drivenone duty & one jocky pump) as per the manufacturer's instruction,specification and drawing shown on the basement floor.Fire pump set price shall also include suction & delivery manifolds,gate valves,check valves,pressure & flow gages,safety valves & all accessories.The contractor shall submitt testing certificate from regonized institution together with maintenance & operational manual.

i) Electric pump Capacity: Q= 4 liter/Second

ii)Diesel driven pump Capacity: Q= 4 lit./Second

iii) Jocky pump Capacity: Q= 0.6 liter/Second




11.5.1 Supply and lay internal uPVC waste and vent pipes

according to where shown on the drawings, complete with

all the necessary fittings. Dia. 50 mm ml 272 " 65 " ml 10 " 110 " ml 110

11.5.2

Dia. 110 mm No 1

11.5.3

Size:- Dia. 110 mm No 21

11.5.4

Dia. 110 mm No 10

11.5.5

size

All domestic waste, vent and storm water pipe lines shall be PN4 uPVC pipes and shall be provided with a minimum slope of 2% towards the outlet unless specified. All Upvc pipes and necessary fittings shall be standard quality and be free from damage during storage, transportation,construction etc. Unit price shall include all the necessary assistance civil works, such as excavation cartaway, fixing or hanging to walls, beams or slabs.etc., necessary fittings such as bends, Y, T, etc.Storm water uPVC pipes shall resist the external temperature and the quality shall meet the purpose.

Supply and install vent caps made of uPVC to beconnected to the roof terminal of vent pipe as shown on the riser diagram, complete with all the necessary sealings,gaskets to roof water proofing membrane including stainless steel screws/as required and all other accessories.

Supply and fix floor drains made of polished steel of approved quality, complete with P-smell trap and all other necessary fittings and accessories. Type & model shall be approved by the consultant prior to installation.

Supply and fix approved quality screw type clean outs under slab as where shown on the drawing. Price shall include all the necessary connecting pieces.

Supply and fix grated floor drains for basement area with cleanable sand trap complete with all required works.




Dia. 100 mm No 4

11.5.6

Dia. 110 mm ml 342

11.5.7

Qmin= 4 liter/second

No 8

11.6 SUB SOIL DRAINAGE SYSTEM11.6.1 PIPING & DAMP PROOFING

i- Diameter 110 mm perforated Upvc pn-4 ml 44 i i- Diameter 160mm perforated Upvc pn-4 ml 100 iii- Diameter 110 mm Upvc pn-4 ml 42

iv-Geo textile lining 26

v) Diameter 20mm size gravel 8

530.0

11.6.2 Pump sump

Supply and lay approved quality storm water PN-6 uPVC down pipes according to where shown on the drawings. Price shall include all the necessary connecting pieces.

Supply and fix Roof drains made of polished steel of approved quality, complete with all other necessary fittings and accessories.Type & model shall be approved by the consultant prior to installation.

approximate size dia. 150mm (actual size to be determined by manufacturer)

Supply and lay purpose made Upvc slotted plastic pipe for the subsoil drainage system around the building according to where shown on the basement basement floor plan & detail drawing

a) perforated pipe with gravel pack as detailed on the drawing supply and lay the following materials for the subsoil drainage system within the basement floor according to where shown on the basement floor plan and detail drawing

m2

m3

b) Xypex or equivalent coating on the internal wall of basements as to an average depth of 5meters as per the manufacturers instruction

m2




Size (average) --- 2x1meter depth app. 2.2meter No 111.6.3 Submersible Pump

Q =5 l/sec. H = 8meters No 1

11.6.4

Diameter 160mm No 411.7 Site Works

11.7.1 Site Water Works

11.7.1.1

Dia. 50 mm ml 45

Construct pump sump out of reinforced conceret as per the sanitary detail drawing and structural drawing to be given on site.Price shall incude form work,excavation ,Radar or equivalent heavy duty cast iron cover and frame to BS27899 (non ventilated) and all civil assistance works. The contractor shall be fully responsible to coordinate the pump sump sanitary & structural details & location before casting any concrete structure in the basement.

Suupply,fix,test and commission europe manufactured submersible (dewatering) pump as where shown on the drawing,manufacturer's instruction and detail drawing given.Price shall include float swicth (level swicth to start and stop the pump on the predetmed water level),valves(one-way and stop valves) , dia.80mm Upvc PN-10 pressure discharge pipe up to the nearest storm water drainage point as shown on the drawing and all other necessary accessories required for the proper functioning of the system.

Supply & lay cleaning eye on each corner of the sub soil drainage system as where shown on the drawings.Provide plug or screw tube plastic cap on top to external ground level.

Supply and install galvanized steel pipes to basement water tanks as shown on the drawing. Complete with all the necessary fittings and accessories.




11.7.1.2

Dia. 50mm No 111.7.2 Site Waste and Storm Water Drainage system

11.7.2.1 Waste water drainage

Dia.110 mm ml 40 Dia.160 mm ml 35 Dia.200mm ml 10

1.7.3 Manholes

Dia. 600 mm, average depth 800 mm No 311.7.4 Septic tank.

No 1

Supply ,install and commission water meter of approved quality with gate valves before and after water meter as where shown on the drawing. The contractor shall be responsible to facilitate all the required procedures by the local water authority.

Supply and lay uPVC sewage pipes according to the drawing shown with a minimum slope of 1% or natural ground slope which ever is greater on a firm bed sand 100mm thick below and 200 mm thick above the crown of the pipe in open ground. The joints shall be made tight and installation shall make the best condition for cleaning and maintenance. Unit price shall include excavation of the trench and cartaway. (Installation shall also follow manufacturers' instruction .)

Construct manholes on a sanitary sewer as where shown on the drawing in precast concrete round pipes on 150mm thick reinforced concrete bottom slab in dia.10c.c. 150mm dia.10 c/c 150mm both ways and radel or equivalent factory made cast iron manhole cover for medium traffic. Price shall include all assistance civil works and handle.

Construct septic tanks With filteration chamber out of stone masonry walls, reinforced concrete bottom and top slabs, reinforced and concrete manhole covers.The work shall be carried out in accordance with the structural and sanitary drawings. Price shall include excavation of pit cart away and backfilling, gravel, etc.Capacity 40m3




11.7.5

Ditch size: 1/2 ø300 ml 50MECHANICAL WORKS

12.1

12.1.1 Duct-in mounted Extract Fan

a) D-EF-1i)Fan Capacity Type = DYN AIR or equivalent Model ……… Capacity: 150 liter/second Total static head ... 15mmH2O

Set 1

b) D-EF-2i)Fan Capacity Type = DYN AIR or equivalent Model ……… Capacity: 30 liter/second Total static head ... 15mmH2O

Set 1

12.1.2 Basement Exhuast fan[BEF]

Supply and lay Grill cover ditch made of R-C as where shown on the drawings.Price shall include excavation, cart away and all assistance civil works.

VENTILLATION /SUPPLY & EXTRACTING FANS

All fans& accessories shall bemanufactured as per recognized codes & standareds and shall be approved by submitting catalogues. Price shall also include all necessary control switches and electric wiring /where not specified in the electrical design/ and all necessary accessories for the proper functioning of the system.The contractor shall verify the final required fans total pressure based on the selected/purchased filters, sound dampers, grills, duct layouts & etc.

Supply,install, test and commission extracting fan as where shown on the drawing and manufacturers' instruction. Price shall include all the necessary accessories.

ii) Supply and install noise attenuator of Europe manufactured on the exhaust duct as shown on the drawing and manufacturers instruction. Q = 150L/sec

ii) Supply and install noise attenuator of Europe manufactured on the exhaust duct as shown on the drawing andmanufacturers instruction.Q =30L/sec




• Back ward bladed impller with high efficency • Collars for fixing to the duct• Support brackets• Protection guard Fan Capacity Type = DYN AIR or equivalent Model ……… Capacity: 3304 liter/second Total static head ... 22mmH2O Set 1

12.1.3 Roof mounted extracting fan[EXF]

Fan Capacity Type = DYN AIR or equivalent Model ……… Capacity: 1800 liter/second Total static head ... 15mmH2O Set 1

12.1.4 Duct-in mounted Supply Fan

a) D-SFi)Fan Capacity Type = DYN AIR or equivalent Model ……… Capacity: 128 liter/second Total static head ... 30mmH2O

Set 1

Supply,install,test and commission backward blade centrifugal extracting fan as where shown on the drawing and manufacturers' instruction. Price shall include all the necessary accessories.

• Centrifugal,exhaust fan/Europe manufactured,with a capacity mentioned below

• Main structure in galvanized steel sheet ,inside lined with acoustic insulation (thickness 50mm)



ii) Supply and install noise attenuator of Europe manufactured on the exhaust duct as shown on the drawing andmanufacturers instruction. Q = 128L/sec




12.1.5

• Back ward bladed impller with high efficency • Collars for fixing to the duct• Support brackets• Protection guardBasement Supply fan [BEF] Fan Capacity Type = DYN AIR or equivalent Model ……… Capacity: 1284 liter/second Total static head ... 40mmH2O Set 1Multi purpose hall Supply fan [SF] Fan Capacity Type = DYN AIR or equivalent Model ……… Capacity: 1800 liter/second Total static head ... 32mmH2O Set 1

2.1.6 Extracting Kitchen Hoods, fans and accessories

- Washable grease filter - Condenser water trap - Hangers / Support structures - Sound attenuators - Canopy light - Control switch with 20 min. over run

Supply,install,test and commission backward blade centrifugal air supply fans as where shown on the drawing and manufacturers' instruction. Price shall include all the necessary accessories.

• Centrifugal,supply fan/Europe manufactured,with a capacity mentioned below


Supply, fix, test and commission stainless steelkitchen hoods with approved quality extracting fans as per the manufacturer's instruction and shown on the drawing & technical specification. Including :

- kitchen fans & accessories which shall be able to resist temperature of up to min. 300ºc

/Listed hood sizes are preliminary,coordinate the final hood & fan capacities with the final kitchen/stoves/ layout to be submitted by the tenant & get approval from the consultant before purchasing/




Hood……...Size : 3.15x2 meters Type : Single Island canopy Extracting fan ..….. Type ……. Model ….. Capacity: Extract air =1000 liter/second Exter. Static pressure =25mm H2O No 1

2.2 Exhaust and supply air inlets and accessories

2.2.1 Exhuast air grills

i) Capacity =168liter/sec /EGp-1 Size : 300x300mmxmm Type : air master or equivalent Model: ARG-H Colour: As per the Architect's preference No 8 ii) Capacity =112liter/sec @HL /EGp-2 =56liter/sec @LL /EGp-2' Size : 250 x 250mmxmm@HL : 200 x 150mmxmm@LL Type : air master or equivalent Model: ARG - H No 10

Capacity =150liter/sec /EGs Size : 250x250mmxmm Type : air master or equivalent Model: ARG-H Colour: As per the Architect's preference No 1

a - On 6th floor kitchen

All supply and exhaust air grilles and diffusers shall be approved quality and located to ensure the correct air distribution pattern without stagnant regions or draughts occuring in the room that they are serving. Price shall include dampers,sealing gaskets and all necessary accessories and connecting pieces for the proper functioning of the systems.

Supply, fix, test and commission exhaust air grills. The frame and blades shall be made from high quality extruded aluminium profile and standard (20mm) blade spacing. Price shall include foam gasket seal around the back of the frame and flexible duct connectors as required.

a) Exhuast air grills / Basement car parking

b) Exhuast air grills /Strong room

c) Exhuast air grills /Mechanical room




Capacity =280liter/sec /EGm Size : 300x300mmxmm Type : air master or equivalent Model: ARG-H Colour: As per the Architect's preference No 1

12.2.2 Exhaust air celing diffusers on multi purpose hall Capacity = 450Liter/sec. /RAD Size : 525x525mm Type : air master or equivalent Model : ACD4 Colour : As per the Architect's preference No 4

12.2.3 Supply air grills

i) Capacity =321liter/sec /SGp Size : 350x350mmxmm Type : air master or equivalent Model: ARG-H Colour: As per the Architect's preference No 4

Capacity =128liter/sec /SGs Size : 250x100mmxmm Type : air master or equivalent Model: ASG-H Colour: As per the Architect's preference No 1

12.2.4 Supply air celing diffusers on multi purpose hall Capacity = 450Liter/sec. /SAD Size : 525x525mm Type : air master or equivalent Model : ACD4+D Colour : As per the Architect's preference No 4

12.2.5 Toilets/exhaust air disc valves Capacity = 15liter/sec. /DV Neck size: Dia. 100mm Type: air master or equivalent Model: ADV

Supply, fix, test and commission supply air grills. The frame and blades shall be made from high quality extruded aluminium profile and standard (20mm) blade spacing. Price shall include foam gasket seal around the back of the frame and flexible duct connectors as required.

a) Supply air grills / Basement car parking

b) Supply air grills /Strong room




Colour: As per the Architect's preference No 212.2.6 Steel Grill cover /rectangular/

i) On strong room Size: 350x350 mmxmm No 2ii) On 6th floor toilets Size: 300x300 mmxmm No 1

12.3 Ventilation Ducts

12.3.1 Exhaust & Supply duct

Duct longer size Sheet metal (mm) thickness (mm) Up to 350 mm 0.6 mm 400 to 660 mm 0.7 mm 670 to 910 mm 0.9 mm 920 to 1270 mm 1.0 mm 1280 to 1520 mm 1.3 mm 1530 to 2130 mm 1.5 mm

12.3.1.1 Exhaust air duct

a) Basement car parking Size: 200x100 mmxmm ml 27 300 x 150 mmxmm ml 95 300 x 250 mmxmm ml 38 300x300 mmxmm ml 2 400x250 mmxmm ml 33 400x375 mmxmm ml 11 575x375 mmxmm ml 7

Supply, fix, test and commission steel grill cover on the external duct after fan with all connecting pieces and with all necessary accessories

Supply, fix, test and commission galvanized steel air distribution ducts as where shown on the drawing. All duct construction and installation shall follow the technical specification of this project, standards and recommendations given on SMACNA(Sheet Metal and Air Conditioning Contractors National Association, INC) and EBCS 11

Price shall include all the necessary duct reinforcement, fixing clamps to slabs, walls, vanes, etc and all the necessary fittings and civil assistance works.

Minimum thickness of rectangular duct construction shall be as given below:




575x400 mmxmm ml 3 575x450 mmxmm ml 9 900x450 mmxmm ml 36b) Multi purpose hall Size: 300x300 mmxmm ml 10 400 x 400 mmxmm ml 5 675 x 400 mmxmm ml 5c) Kitchen Size: 425x400 mmxmm ml 17d) Toilet Dia.: 100mm ml 2 150mm ml 5e) Strong room Dia.: 225mm ml 6

12.3.1.2 Supply air duct

a) Basement car parking Size: 350x200 mmxmm ml 15 475 x 350 mmxmm ml 3 475 x 425 mmxmm ml 50b) Multi purpose hall Size: 400x225 mmxmm ml 15 400 x 400 mmxmm ml 19 675 x 400 mmxmm ml 11

12.4 Dampers and accessories :

12.4.1 Volume Dampers

Basement car parking and Multi purpose hall i) On extract duct For duct Size : 300x150 mmxmm / VD No 12 300x250 mmxmm / VD No 1 300x300 mmxmm / VD No 5 400x250 mmxmm / VD No 2 ii) On Supply duct

All dampers and accessories shall be manufactured as per recognized codes,standards & technical specificationand full fill the requirments specified in the technical specification & shall meet the purpose.

Supply ,fix,test and commission volume dampers of approved quality as where shown on the drawings. Price shall include all the necessary accessories and connecting pieces.




400x225 mmxmm / VD No 212.4.2 Spliter Dampers

For duct Size : 475x425 mmxmm / SD No 1 675x400 mmxmm / SD No 1

12.4.3 Fire Dampers

For duct Size : 475x425 mmxmm / FD No 1 675x400 mmxmm / FD No 1 Dia.: 225mm No 1

12.5 Duct-in mounted electric heater

- Heating capacity = 1Kw Air flow : 128 liter/sec. Max. pressure drop/allowable/: 15 - 20 pascale No 1

Total DIVISION 11(Carried to Summary)

DIVISION 13 - ELECTRICAL INSTALLATIONSSupply and Install

13.1 No 1

13.2 ml 12

13.3 No 1

13.4 LS 1

13.5 Distribution Boards

13.5.1

1 pc MCCB main switch of 3x400A 3 pcs mcb 3x60A

Supply ,fix,test and commission spliter dampers of approved quality as where shown on the drawings. Price shall include all the necessary accessories and connecting pieces.

Supply ,fix,test and commission fire dampers of approved quality as where shown on the drawings. Price shall include all the necessary accessories and connecting pieces.

Supply,fix,test & commission duct in mounted electric air heater as per the drawings shown & manufacturer's instruction,complete with all necessary accessories.

Manhole of 80X80X70cm internal dimensions in 20cm solid block walls and cast iron cover. The internal walls to receive two coats of plaster in cement - sand mortar (1:3)

Underground PVC conduit2 of 3X110mm diameter for reticulation of electric power cables. Price to include all related vearth works ans sand bedding

Earthing electrode of 16mm diameter and 1200mm in length, in hard drawn copper rod to be provided at the location shown on the electrical drawing. Price to include lead cable of 90mm2 connecting the ground bar of MDB- GF to the grounding electrode

Allow a provisional sum for EEPCO's incoming underground electric power cables and provision of the kilowatt hour meters as shown on the electric riser diagram

Floor standing MDB-GF in sheet steel housing with lockable door, bus bars, cover plates and PNE terminals, consisting of:




1 pc mcb of 3x40A 6 pcs mcb of 3x32Aall complete and ready for use No 1

13.5.2

1 pc main switch of 3x63A 1 pc mcb of 3x32A 15 pcs mcb of 1x16A 1 pc power contactor of 3x20A 8 pcs tumbler switches of 1x16A 1 pc bypass switch of 3X16A No 1

13.5.3

1 pc main switch of 3x50A 3 pcs mcb of 1x16A 1 pc thermal magnetic circuit breaker of (3X(2.5….4)A 2 pcs ditto but breakers of 3X(6….10)A 1 pc ditto but breakers of 3X(6….10)A 2 pcs ditto but breakers of 3X(4…6.3)A 2 pcs mcb of 1x10A 4 pcs power contactors of 3X10A 1 pc power contactors of 3X40A 2 pcs adjustable pressure switches 1 pc time switch of 2 contacts main switch of 3X10Aall complete and ready for use No 1

13.5.4

1 pc main switch of 3x32A 14 pcs mcb of 1x16A No 1

13.5.5 Ditto but lighting and powr panel (LPP-MF) consisting of: 1 pc main switch of 3x32A 14 pcs mcb of 1x16A No 1

13.5.6 Ditto ditto but lighting and power panel (LPP-2F) modules consisting of:


13.5.7 Ditto ditto but lighting and power panel (LPP-3F) consisting of: 1 pc main switch of 3x32A 11 pcs mcb of 1x16ASimilar panels are: LPP-4F and LPP-5F No 3

13.5.8 Ditto ditto but lighting and power panel (LPP-6F) consisting of: 1 pc main switch of 3x60A 1 pc mcb of 3x40A 9 pc mcb of 1x16A No 1

13.5.9 Ditto ditto but lighting and power panel (LPP-7F) consisting of:

Surface mounted lighting and power panel (LPP-GF) in sheet steel housing with lockable door, bus bars, cover plates and PNE terminals consisting of:

Surface mounted motor control center (MCC-BF) in sheet steel housing with lockable door, bus bars, cover plates and PNE terminals consisting of:

Ditto as item 5.4 just above but lighting and power panel (LPP-1F) consisting of:




1 pc main switch of 3X40A 1 pc mcb of 3x20A 2 pcs mcb of 3x16A 1 pc mcb of 3x10A 12 pcs mcb of 1X16A 1 pc master dimmer switch of 2500W No 1

13.5.10 Ditto as item 4.10 just above butlift control board (LCB) consisting of:

1 pc main switch of 3X60A 2 pcs mcb of 3x32A 1 pc mcb of 3x10A 3 pcs mcb of 1x16A 1 pc mcb of 1x10A 1 pc time switch 2 pcs thermal magnetic circuit breaker of 3X(4….6.3A) No 1

13.6 Electric Lighting

13.6.1 No 580

13.6.2 Flush mounted lighting switches type Legrand Suno type or equivalent :

- One - gang one - way (single) No 84 - Two - gang one - way( double) No 49 - Two - way No 26 - Intermediate No 5 - Triple switch No 3 - Dimmer No 4 - Llighting push-buttons No 10

13.7 Socket Outlets

13.7.1 No 49

13.7.2 Ditto as item13. 7.1) just above but double socket outlets No 17213.7.3 Ditto ditto but socket outlets with built-in on-off switches No 2

13.7.4 No 18

13.7.5 No 1

13.7.6 No 2

Light points fed through PVC insulated conductors of 2/3.2.5mm2 in thermoplastic conduits of diameter 13/16mm, including flush mounted switch boxes of 60mm diameter, other junction boxes with covers as required and screw type insulating caps.

Flush mounted socket outlets of 1x16A , 2P with earth lateral contacts, complete with cover plates and frames (type Suno 7740 23 or equivalent) fed through PVC insulated conductors of 3x2.5mm2 in thermoplastic conduits of 16mm diameter, complete with all wiring accessories.

Hand drier outlets fed through PVC insulated conductors of 3x2.5mm2 in thermoplastic conduits of 16 mm diameter , complete with all wiring accessories

Iindustrial 3 phase socket outlet fed through PVC insulated conductors of 5x2.5mm2 in thermoplastic conduits of 16 mm diameter, complete with all wiring accessories

Dish washing machine outlet fed through PVC-insulated and sheathed cable of 5X2.5mm2 in recessed thermoplastic conduit of 21mm diameter




13.7.7 No 2

13.7.8 ml 2

13.8 Internal Main Feeder Lines

13.8.1 ml 120

13.8.2 ml 150

13.8.3 ml 20

13.8.4 ml 10

13.8.5 ml 16

13.8.6 ml 5

13.8.7 ml 20

13.9 Electric Light Fittings with Lamps

No 7

No 66

No 29

No 237

No 22

No 138

No 10

No 23

No 20

No 5

Coffee machine outlet fed through PVC-insulated and sheathed cable of 5X2.5mm2 in recessed thermoplastic conduit of 21mm diameter

Electric oven outlet fed through PVC-insulated and sheathed cable of 5x4mm2 in recessed thermoplastic conduit of 23mm diameter

The cables are PVC insulated and sheathed ones running partially on cable tray and partially in cable riser shafts and supported by cable saddles at appropriate intervals

4x10/6mm2

4X16/10mm2

cable of 4X16/10mm2 paritially running in cable riser shaft and partially in recessed thermoplastic conduit of 32mm diameter, running from LPP-GF to MCC BF

Cables of 4x10/6mm2 in recessed thermoplastic conduits of 36mm diameter running to fire pumps

Cables of 5x2.5mm2 in recessed thermoplastc conduits of 23mm diameter running to domestic water pumps

Cables of 5x1.5mm2 in recessed thermoplastic conduits of 19mm diameter running to jockey pump

Cables of 5x1.5mm2 in recessed thermoplastic conduits of 19mm diameter running to sewage pump

Type 1 - Water-proof ceiling luminaire type Philips Pacific TCW 215 with 1xTL-D36/380 lamp or equivalent

Type 2 - Water-proof ceiling luminaire type Philips Pacific TCW 215 with 2X'TL'D-36/830 W Ditto as type 1 just above but wall mounted or equivalent.

Type 3 - Surface mounted ceiling luminaire type Philips TCS 398 with 2xTL-D 36/830W lamps with IC gear and C6 reflector or equivalent

Type 4 - Surface mounted ceiling luminaire type Philips TCS 398 with 4xTL-D 36/830W lamps with IC gear and C6 reflector or equivalent

Type 5 - Wall luminaire type DISANO 408 Wing with FL 1X18 W lamp or equivalent.

Type 6 - Ceiling luminaire type RZB art. 211006.002 with 75W inacdescent lamp or equivalent

Type 7 - Wall luminaire with eyelid shield type RZB. 58125.002 with A60 75W lamp or equivalent.

Type 8 - Surface mounted downlight type 931043.002 with A60 W lamp or equivalent.

Type 9 - Compact ceiling luminaire type DISANO 785 Compact with FL 2x26D lamps or equivalent.

Type 10 - Surface mounted down light type RZB art. 921384.774 with HIT-CE-of 150 W lamp or equivalent.




No 7

ml 200No 1

13.10 Telephone and Data Systems

13.10.1 No 1

13.10.2 ml 6

13.10.3 P.S

13.10.4 No 141

13.10.5 No 126

13.10.6 No 24

13.11 Sound System

No 8

13.12 TV Aerial System

13.12.1 No 2

13.12.2 No 2

13.13 Lightiing Arrester System

13.13.1 ml 150

13.13.2 No 1

Type 11 - Surface mounted downlight typeRZB art. 91154.002 with PAR 38 120W lamp or equivalent.Type 12 - Continous linear lighting stripsType 13 - Chandlier with 30 lamps of 60W each or equivalent

Manhole of 60x60x70cm internal dimensions and in solid block walls and reinforced concrete cover. The internal walls to receive two coats of plaster in cement-sand mortar (1:3). Price to include all related earth works

Underground PVC pipe of 110mm diameter for ETC's primary cable intake. Price to include all related earth works and concrete cover of 10cm thickness with nominal reinforcement

Allow a provisional sum for the intake ETC's primary telephone cable of 100 pairs, internal wiring and provision of telephone apparatuses

Flush mounted RJ 12 telephone socket outlets type Legrand Suno or equivalent, including thermoplastic conduits of 19mm minimum diameter for recessed installation

Ditto as item 10.4 above but RJ 45 data outlets in thermoplastic conduits, the sizes of which are indicated on the electrical drawings

Ditto as item 10.4 above but without thermoplastic conduits, the outlets to be mounted on cable trunkings

N.B.1) Supply and installtion of data cables and equipments shall be undertaken by the specialized contractor to be chosen by a selected bid at a later stage

N.B.2) Regarding CCTV system, only PVC conduits have been indicated on the electrical drawings. The CCTV system shall be undertaken as part and parcel of the data system referrred to under item 1 just above

Speaker points fed through recessed thermoplastic conduits of 13mm diameter running from sound console points to column mounted speaker outlets. Cabling and other audio equipments to be supplied by others

Flush mounted TV aerial outlet box of 60mm diameter and screwed-on cover and thermoplastic conduit of 23mm diameter running from TV outlet points to vertical cable riser shaft

Ditto as item 12.1 just above but the recessed thermoplastic conduit running from TV outlets in thje multi-purpose hall on the seventh floor and coffe shop on the sixth floor to roof level

Air terminations in copper bar of 3x25mm mounted on appropriate copper saddles/supports to be provided at intrervals of not more than 1 meter

Taper pointed air rod in copper rod of 16mm diameter and 2 meter length, complete with fixing and connection accessories




13.13.3 Ls

13.13.4 No 8

13.13.5 No 8

13.14 Passenger Elevators

13.14.1 No 1

- Lift speed………………………….1.6m/sec - Power…………………………..….19HP - Rated load………………. ……….800 Kg - Clear entrance ………………….900 mm - Exterior car width ……………….1400mm - Exterior car depth ……………….1350mm - Exterior car height……………….2045mm - pit depth.. ……………………….1300 mm - Clear overhead…………………. 3800 mm

13.15 Miscellaneous

13.15.1 ml 10

13.15.2 ml 40

13.15.3 ml 50

13.15.4

- cable tray of 5x500mm ml 12 - cable tray of 5x300mm ml 16

For down conductors, steel reinforcement bars in concrete coloumns as shown on the electrical drawing No 10/10 are to be utilized. Price to be quoted for welding works involved and bondage with air termination copper tapes. The totalcross section of the bars to be used should not be less than 80mm2 for each down conductor

Oblong test or junction clamps to be located on concrete columns at the height of 150cm above finished floor level of second basement

Earth rod in hard drawn copper rod of 16mm diameter and 2400mm length each, for direct driving in soft ground and same to be provided with concrete inspection pit of 320x320x210mm external dimensions. Price to include starnded copper wires running in rigid thermoplastic conduit of 16mm diameter for recesssed installation from the oblong test points to the earthing electrodes, connection with the later to be with thermoweld

Supply and install interlocked twin passenger elevators for 10 persons, in stainless steel cabin and 2 leaf sliding doors and 12 landings, all complete and ready for use

Recessed rigid thermoplastic conduits of 19mm diameter running from LPP-7F located in cable riser shaft to future neon light locations on roof tops. The conduits to be provided with pull wires cords

PVC insulated and sheathed cable of 2x1.5mm2 running from MCC-BF to float switches in ground and roof mounted water tanks, the cables mostly running in riser cable shaft, access to the float switches being in recessed thermoplastic conduits of 13mm diameter

N.B Installation of water pumps to be undertaken on the basis ofr technical data to be provided under the mechanical/sanitary scope of works

DLP aluminium trunking of 50x105 mm with 2 partitions, complete with accessories, and to be used for electric power, telephone and data cables reticulations

Cable trays in galvanized sheet steel suspended from ground floor ceiling slab with galvanized steel rods provided at intervals of not more than 150cm and the following width:




13.5.5

a) Rigid PVC of diameter 16mm for recessed installation ml 1 b) Diameter 19 mm ml 1 c) Diameter 23 mm ml 1 d) Diameter 32 mm ml 1 e) Diameter 40 mm ml 1 e) Diameter 50 mm ml 1Total Carried to Summary

Unit prices to be filled for future application of payments to the would-be contractor. Please note that the these unit prices not to be included in the tender unit prices



NOV DEC JAN FEB MAR APR MAY JUN JUL AUG SEP OCT



OCT NOV DEC JAN FEB MAR APR MAY


Division 3 - MECHANCIAL of 148

Item Description Unit Qty. Rate Amount 1 SANITARY INSTALLATION

1.1 SANITARY EQUIPMENT (FIXTURES)

the owner's approval, based on samples,catalogues and brochures presented by the contractor.Unit Price shall include all the necessary fixing brackets or hooks and allassistnace civil works such as chiselling of walls, floors, beams and etc.

1.1.1 No 44

1.1.2 No 36

1.1.3 No 36

1.1.4 No 44

1.1.5

for hand wash basins & price shall include all civil works. No 44

1.1.6 Supply, fix, test, and commission recessed type stainlesssteel fire hose reels complete with rack cabinet,glass door,30m long with 32mm diameter canvas hose, bronzeadjustable fog nozzle, angle valve with built in pressurereducer, hose rack, fire extinguishers 6Kg dry powder orclean agent and necessary accessories all as per themanufacturer's instruction and shown on the drawings. Type ------ NAFFCO or equivalent Model ---- RACK CABINET-NFR/750 Colour----To Architect's preference No 11

All fixtures which differs from that specified below is subject to

Supply ,fix,test & commission hand wash basins made of white vitreous china with chrom plated lever operated cold water tap, Complete with plug , P-smell trap with connection pipes and all other necessary accessories.

Supply and fix wash down water closets made of white vitreous china with plastic seat cover and including low flush cistern.Complete with all necessary accessories.

Supply and fix toilet paper holder made of white vitreous china,recessed to wall complete with all necessary accessories

Supply and fix crystal glass mirrors for toilets hand wash basins with copper back protection, size 500/400 mm including chrome plated brass mirror clips with chrome plated screws. Price shall also include approved quality shelves.

Supply and fix soap holder made white vitreous china,recessed to wall of size

150 x 150 mm. Complete with the necessary fixing and other accessories

A2

Abebaw:



1.1.7 Supply and fix water heater of approved quality, complete

cold and hot water connection pipes. Price shall include all fixing accessories. Capacity: 80 liter No 1 50 liter No 2

1.1.8

manufacturer's technical specification & catalogues/ No 2

1.1.9

No 2 Size: 700 x 700 mm

1.2 Plumbing Water Supply System

shown on the drawings.

1.2.1 slabs a) dia.15mm Pipe ml 110 b) dia.20 " " ml 180 d) dia.32 " " ml 7 e) dia.40 " " ml 10 f) dia.50 " " ml 20 g) dia. 65mm ml 100

1.2.2

with insulation, one way & safety valves, chrome gate valves on

Supply and fix stainless steel kitchen sink with double bowl as where

shown on the drawing. Complete with the necessary fixing and other accessories.

/Sinks shall be from pure stainless steel & quality shall be approved by submitting

Supply and fix shower units made of enameled cast iron, or equivalent complete with

approved quality flexible shower head, lever acion cold & hot water mixer/trp/ &

hanger,P-smell trap and with all other necessary accessories.

Supply, install, test,disinfect and commissioning domestic water supply medium

grade galvanized steel piping, including pipe fittings, supports,anchors and

painting where required, cutting and making of chases on walls (if necessary)

and necessary accessories, all as specified in the technical specification and

Cold Water Piping through ducts & cabinets, ceiling walls & below

Supply and install medium grade galvanized steel pipes to fire water distribution

system as shown on the drawing. Complete with all the necessary fittings



Dia. 50 mm ml 18

1.2.3 Supply, fix, test, and commission European standard

and shown on the drawings. Dia. 15 mm/bronze No 84

1.2.4

sizes and as where shown on the drawing. a) dia.20 No 5 b) dia.25 No 6 c) dia.32 No 3

1.3 WATER TANKS AND ACCESSORIES

fiber glass fire & domestic water storage tanks , Pumps and accessories sanitary installations.

1.3.1 Fiber Glass Water tanks and accessories on basementSupply,mount,test & commission fiber glass water Tanks for water storage (Fire & domesticwater supply ) tanks.Complete with: - All connecting pieces & flanges (On drain, over flow, suction pipes) - 600x600mm properly hinged access door -dia.100mm insect proof air vent pipe

Capacity : 15m3 No 2

Capacity:8m3 No 2

i - Supply, install, test and commision the following on fire fighting water storage tanks - 50mm dia. float valve No 2


and accessories.Price shall include painting of red color on all exposed pipes .

service valves on the water supply pipe before sanitary appliances

including all accessories, as specified in the technical specification

Ditto to item number 1.2.3 approved quality bronze gate valves on

pipe lines above ceiling , internal branch water pipes of the following

a - Fiber glass water tanks :(On basement floor)

i - Municipal water storage tank for fire fighting in basement

ii - Municipal water storage tank for domestic water use in basement

b - Accessories



No 2 - 50mm dia. G.S.Pipe over flow pipe ml 2 - 50mm dia. gate valve on suction pipe/brass No 2

connecting pipe work to /1.5meter length pipe/ No 1

ii - Supply, install, test and commision the following on domestic water tanks - 50mm dia. float valve No 2


No 2 - 50mm dia. G.S.Pipe over flow pipe ml 2 - 50mm dia. gate valve on suction pipe/brass No 2 - Automatic level control swith in one of the water tanks,including electrical wiring No 1

connecting pipe work to /1.5meter length pipe/ No 1

1.3.2 Fiber Glass Water tanks and accessories on roofa - Fiber Glass water tank

water use on the roof. Size: 3m3 No 2

i - Supply, install, test and commission, the followings on domestic water tanks on the roof.

connection to basement centrifugal water pump. No 1 - dia65mm gate valve on drain pipe No 2 - dia.65mm G.S.Pipe drain pipe ml 2 - dia65mm G.S.Pipe over flow pipe ml 2 - dia.50mm gate valve after tank No 3 - dia.65mm gate valve before tanks No 2

1.4 Domestic & Fire Pumps

1.4.1

electrical control system and all required accessories.

- 50mm dia. G.S.Pipe drain pipe with gate valve/brass

- Dia.65mm brass gate valve on connecting pipe /two tanks/.Price include

- 50mm dia. G.S.Pipe drain pipe with gate valve/brass

- Dia.65mm brass gate valve on connecting pipe /two tanks/.Price include

i - Ditto to item1.3.1 /basement water tanks/,water storage tank for domestic

b - Accessories

- Automatic level control switch, price include electric wire

Supply,install,test and commission europe manufactured & approved ,centrifugal

cold water booster pumps(i.e one stand by and one duty) on basement to roof

water tanks as shown in the drawing.Complete with check & gate valves,piping,



Capacity: Q= 4 liter/Second H= 46meter No 2

1.4.2

,specification and drawing shown on the basement floor.

operational manual.

The pumps consists of the following :- i) Electric pump Capacity: Q= 4 liter/Second H= 46meter ii)Diesel driven pump Capacity: Q= 4 liter/Second

H= 46meter iii) Jocky pump Capacity: Q= 0.6 liter/Second H= 46meter Set 1

1.5 WASTE, VENT AND STORM WATER PIPES ANDACCESSORIESAll domestic waste, vent and storm water pipe lines

slope of 2% towards the outlet unless specified. All uPVC pipes and necessary fittings shall be standard quality and be free from damage during storage, transportation,construction etc. Unit price shall include all the necessaryassistance civil works, such as excavation cartaway, fixing or hanging to walls, beams or slabs.etc., necessary fittings such as bends, Y, T, etc.Storm water uPVC pipes shall resist the externaltemperature and the quality shall meet the purpose.

1.5.1 Supply and lay internal uPVC waste and vent pipesaccording to where shown on the drawings, complete with all the necessary fittings. Dia. 50 mm ml 272 " 65 " ml 10 " 110 " ml 110

Supply,install,test & commissione europe manufactured & approved quality factory

assembled & testedautomatic fire pumps set(i.e one diesel driven stand by ,

electric drivenone duty & one jocky pump) as per the manufacturer's instruction

Fire pump set price shall also include suction & delivery manifolds,gate valves,check

valves,pressure & flow gages,safety valves & all accessories.The contractor shall

submitt testing certificate from regonized institution together with maintenance &

shall be PN4 uPVC pipes and shall be provided with a minimum



1.5.2 Supply and install vent caps made of uPVC to be

connected to the roof terminal of vent pipe as shown on theriser diagram, complete with all the necessary sealings,

steel screws/as required and all other accessories. Dia. 110 " No 1

1.5.3

shall be approved by the consultant prior to installation. Size:- Dia. 110 mm No 21

1.5.4 Supply and fix approved quality screw type clean outsunder slab as where shown on the drawing. Price shall include all the necessary connecting pieces. Dia. 110 " No 10

1.5.5

size No 4 Dia. 100 "

1.5.6pipes according to where shown on the drawings. Price shall include all the necessary connecting pieces. Dia. 110 mm ml 342

1.5.7

by the consultant prior to installation. Qmin= 4 liter/second

No 8

1.6 SUB SOIL DRAINAGE SYSTEM1.6.1 PIPING & DAMP PROOFING

Supply and lay purpose made Upvc slotted plastic pipe

gaskets to roof water proofing membrane including stainless

Supply and fix floor drains made of polished steel of approved quality, complete

with P-smell trap and all other necessary fittings and accessories. Type & model

Supply and fix grated floor drains for basement area with cleanable sand trap complete with all required works.

Supply and lay approved quality storm water PN-6 uPVC down

Supply and fix Roof drains made of polished steel of approved quality, complete

with all other necessary fittings and accessories.Type & model shall be approved

approximate size dia. 150mm (actual size to be determined by manufacturer)

for the subsoil drainage system around the building according to

where shown on the basement basement floor plan & detail drawing

a) perforated pipe with gravel pack as detailed on the drawing



the basement floor plan and detail drawing i- Diameter 110 mm perforated Upvc pn-4 ml 44 i i- Diameter 160mm perforated Upvc pn-4 ml 100 iii- Diameter 110 mm Upvc pn-4 ml 42 iv-Geo textile lining m2 26 v) Diameter 20mm size gravel m3 8

m2 530.0

1.6.2 Pump sump Construct pump sump out of reinforced conceret as per the sanitary detail drawing and structural drawing to be

in the basement. Size (average) --- 2x1meter depth app. 2.2meter No 1

1.6.3 Submersible Pump

(dewatering) pump as where shown on the drawing, manufacturer's instruction and detail drawing given. Price shall include float swicth (level swicth to start and stop the pump on the predetmed water level), valves(one-way and stop valves) , dia.80mm

of the system. Q =5 l/sec. H = 8meters No 1

supply and lay the following materials for the subsoil drainage

system within the basement floor according to where shown on

b) Xypex or equivalent coating on the internal wall of basements as to an

average depth of 5meters as per the manufacturers instruction

given on site.Price shall incude form work,excavation ,Radar or equivalent

heavy duty cast iron cover and frame to BS27899 (non ventilated) and all civil

assistance works. The contractor shall be fully responsible to coordinate the pump

sump sanitary & structural details & location before casting any concrete structure

Suupply,fix,test and commission europe manufactured submersible

Upvc PN-10 pressure discharge pipe up to the nearest storm water

drainage point as shown on the drawing and all other necessary

accessories required for the proper functioning of the system



1.6.4 Supply & lay cleaning eye on each corner of the subsoil drainage system as where shown on the drawings.Provide plug or screw tube plastic cap on top to external ground level. No 4 Diameter 160mm

1.7 Site Works1.7.1 Site Water Works

1.7.1.1

Dia. 50 mm ml 45

1.7.1.2

authority. Dia. 50mm No 1

1.7.2 Site Waste and Storm Water Drainage system1.7.2.1 Waste water drainage

and 200 mm thick above the crown of the pipe in open ground. The joints shall be made tight and installation shall make the best condition for cleaning and maintenance.Unit price shall include excavation of the trench and cartaway. (Installation shall also follow manufacturers'instruction .) Dia.110 mm ml 40 Dia.160 mm ml 35 Dia.200mm ml 10

1.7.3 Manholes

Construct manholes on a sanitary sewer as where shown onthe drawing in precast concrete round pipes on 150mm

thick reinforced concrete bottom slab in dia.10c.c. 150mm

Supply and install galvanized steel pipes to basement water tanks as shown

on the drawing. Complete with all the necessary fittings and accessories.

Supply ,install and commission water meter of approved quality with gate

valves before and after water meter as where shown on the drawing. The contractor

shall be responsible to facilitate all the required procedures by the local water

Supply and lay uPVC sewage pipes according to the drawing

shown with a minimum slope of 1% or natural ground slope

which ever is greater on a firm bed sand 100mm thick below

dia.10 c/c 150mm both ways and radel or equivalent factory



include all assistance civil works and handle. Dia. 600 mm, average depth 800 mm No 3

1.7.4 Septic tank.

walls, reinforced concrete bottom and top slabs, reinforced and concrete manhole covers.The work shall be carried out in accordance withthe structural and sanitary drawings. Priceshall include excavation of pit cart away and backfilling, gravel, etc.

Capacity 40m3 No 1

1.7.5

Ditch size: 1/2 ø300 ml 50

2 MECHANICAL WORKS

2.1

2.1.1 Duct-in mounted Extract Fan

a) D-EF-1

i)Fan Capacity

Type = DYN AIR or equivalent

Model ………

Capacity: 150 liter/second

Total static head ... 15mmH2O

Set 1

b) D-EF-2

made cast iron manhole cover for medium traffic. Price shall

Construct septic tanks With filteration chamber out of stone masonry

Supply and lay Grill cover ditch made of R-C as where shown on the drawings.

Price shall include excavation, cart away and all assistance civil works.

VENTILLATION /SUPPLY & EXTRACTING FANS

All central, duct-in mounted fans shall be European manufactured as per recognized codes & standareds and shall be approved by submitting catalogues. Price shall also include all necessary control system & electric wiring /where not specified in the electrical design/ and all necessary accessories for the proper functioning of the system.The contractor shall verify the final required fans total pressure based on the selected/purchased filters, sound dampers, grills, duct layouts & etc.





i)Fan Capacity


Model ………



Set 1

2.1.2 Basement Exhuast fan[BEF]

• Back ward bladed impller with high efficency • Collars for fixing to the duct• Support brackets

• Protection guard


2.1.3 Roof mounted extracting fan[EXF]


2.1.4 Duct-in mounted Supply Fan

a) D-SF

i)Fan Capacity


Model ………



ii) Supply and install noise attenuator of Europe manufactured on the exhaust duct as shown on the drawing andmanufacturers instruction. Q =30L/sec

Supply,install,test and commission backward blade centrifugal extracting fan as where shown on the drawing and manufacturers' instruction. Price shall include all the necessary accessories.

• Centrifugal,exhaust fan/Europe manufactured,with a capacity mentioned below






Set 1

2.1.5

• Back ward bladed impller with high efficency • Collars for fixing to the duct• Support brackets• Protection guard

Basement Supply fan [BEF] Fan Capacity Type = DYN AIR or equivalent Model ……… Capacity: 1284 liter/second Total static head ... 40mmH2O Set 1

Multi purpose hall Supply fan [SF] Fan Capacity Type = DYN AIR or equivalent Model ……… Capacity: 1800 liter/second Total static head ... 32mmH2O Set 1

2.1.6 Extracting Kitchen Hoods, fans and accessories

- Washable grease filter

- Condenser water trap - Hangers / Support structures - Sound attenuators - Canopy light - Control switch with 20 min. over run

Hood……...Size : 3.15x2 meters Type : Single Island canopy


Supply,install,test and commission backward blade centrifugal air supply fans as where shown on the drawing and manufacturers' instruction. Price shall include all the necessary accessories.

• Centrifugal,supply fan/Europe manufactured,with a capacity mentioned below


Supply, fix, test and commission stainless steelkitchen hoods with approved quality extracting fans as per the manufacturer's instruction and shown on the drawing & technical specification. Including :

- kitchen fans & accessories which shall be able to resist temperature of up to min. 300ºc

/Listed hood sizes are preliminary,coordinate the final hood & fan capacities with the final kitchen/stoves/ layout to be submitted by the tenant & get approval from the consultant before purchasing/

a - On 6th floor kitchen



Extracting fan ..….. Type ……. Model ….. Capacity: Extract air =1000 liter/second Exter. Static pressure =25mm H2O No 1

0.02.2 Exhaust and supply air inlets and accessories 0.0

0.02.2.1 Exhuast air grills 0.0

0.00.0

i) Capacity =168liter/sec /EGp-1 0.0 Size : 300x300mmxmm 0.0 Type : air master or equivalent 0.0 Model: ARG-H 0.0 Colour: As per the Architect's preference No 8 1200.0 9600.0

ii) Capacity =112liter/sec @HL /EGp-2 =56liter/sec @LL /EGp-2' Size : 250 x 250mmxmm@HL : 200 x 150mmxmm@LL Type : air master or equivalent Model: ARG - H No 10

Capacity =150liter/sec /EGs Size : 250x250mmxmm Type : air master or equivalent Model: ARG-H Colour: As per the Architect's preference No 1

Capacity =280liter/sec /EGm 0.0 Size : 300x300mmxmm 0.0 Type : air master or equivalent 0.0 Model: ARG-H 0.0 Colour: As per the Architect's preference No 1

2.2.2 Exhaust air celing diffusers on multi purpose hall Capacity = 450Liter/sec. /RAD 0.0 Size : 525x525mm 0.0

All supply and exhaust air grilles and diffusers shall be approved quality and located to ensure the correct air distribution pattern without stagnant regions or draughts occuring in the room that they are serving. Price shall include dampers,sealing gaskets and all necessary accessories and connecting pieces for the proper functioning of the systems.

Supply, fix, test and commission exhaust air grills. The frame and blades shall be made from high quality extruded aluminium profile and standard (20mm) blade spacing. Price shall include foam gasket seal around the back of the frame and flexible duct connectors as required.

a) Exhuast air grills / Basement car parking

b) Exhuast air grills /Strong room

c) Exhuast air grills /Mechanical room



Type : air master or equivalent 0.0 Model : ACD4 0.0 Colour : As per the Architect's preference No 4

2.2.3 Supply air grills

0.0 i) Capacity =321liter/sec /SGp 0.0 Size : 350x350mmxmm 0.0 Type : air master or equivalent 0.0 Model: ARG-H 0.0 Colour: As per the Architect's preference No 4

Capacity =128liter/sec /SGs Size : 250x100mmxmm Type : air master or equivalent Model: ASG-H Colour: As per the Architect's preference No 1

2.2.4 Supply air celing diffusers on multi purpose hall Capacity = 450Liter/sec. /SAD 0.0 Size : 525x525mm 0.0 Type : air master or equivalent Model : ACD4+D Colour : As per the Architect's preference No 4

2.2.5 Toilets/exhaust air disc valves Capacity = 15liter/sec. /DV Neck size: Dia. 100mm Type: air master or equivalent 0.0 Model: ADV Colour: As per the Architect's preference No 2

2.2.6 Steel Grill cover /rectangular/

i) On strong room Size: 350x350 mmxmm No 2

ii) On 6th floor toilets Size: 300x300 mmxmm No 1

2.3 Ventilation Ducts

Supply, fix, test and commission supply air grills. The frame and blades shall be made from high quality extruded aluminium profile and standard (20mm) blade spacing. Price shall include foam gasket seal around the back of the frame and flexible duct connectors as required.

a) Supply air grills / Basement car parking

b) Supply air grills /Strong room

Supply, fix, test and commission steel grill cover on the external duct after fan with all connecting pieces and with all necessary accessories



0.0

0.02.3.1 Exhaust & Supply duct 0.0

0.0Duct longer size Sheet metal 0.0 (mm) thickness (mm) 0.0

0.0 Up to 350 mm 0.6 mm 0.0 400 to 660 mm 0.7 mm 0.0 670 to 910 mm 0.9 mm 0.0 920 to 1270 mm 1.0 mm 0.0 1280 to 1520 mm 1.3 mm 0.0 1530 to 2130 mm 1.5 mm 0.0

2.3.1.1 Exhaust air duct 0.0

a) Basement car parking 0.0

Size: 200x100 mmxmm ml 27 300 x 150 mmxmm ml 95 300 x 250 mmxmm ml 38 300x300 mmxmm ml 2 400x250 mmxmm ml 33 400x375 mmxmm ml 11 575x375 mmxmm ml 7 575x400 mmxmm ml 3 575x450 mmxmm ml 9 900x450 mmxmm ml 36

0.0b) Multi purpose hall 0.0 Size: 300x300 mmxmm ml 10 400 x 400 mmxmm ml 5 675 x 400 mmxmm ml 5

c) Kitchen Size: 425x400 mmxmm ml 17

d) Toilet Dia.: 100mm ml 2 150mm ml 5

e) Strong room

Supply, fix, test and commission galvanized steel air distribution ducts as where shown on the drawing. All duct construction and installation shall follow the technical specification of this project, standards and recommendations given on SMACNA(Sheet Metal and Air Conditioning Contractors National Association, INC) and EBCS 11

Price shall include all the necessary duct reinforcement, fixing clamps to slabs, walls, vanes, etc and all the necessary fittings and civil assistance works.

Minimum thickness of rectangular duct construction shall be as given below:



Dia.: 225mm ml 6

2.3.1.2 Supply air ducta) Basement car parking Size: 350x200 mmxmm ml 15 475 x 350 mmxmm ml 3 475 x 425 mmxmm ml 50

b) Multi purpose hall Size: 400x225 mmxmm ml 15 400 x 400 mmxmm ml 19

675 x 400 mmxmm ml 112.4 Dampers and accessories :

0.00.0

2.4.1 Volume Dampers 0.0

0.00.0

Basement car parking and Multi purpose hall 0.0 i) On extract duct 0.0 For duct Size : 300x150 mmxmm / VD No 12 300x250 mmxmm / VD No 1 300x300 mmxmm / VD No 5 400x250 mmxmm / VD No 2

ii) On Supply duct 400x225 mmxmm / VD No 2

2.4.2 Spliter Dampers

For duct Size : 475x425 mmxmm / SD No 1 675x400 mmxmm / SD No 1

2.4.3 Fire Dampers

For duct Size : 475x425 mmxmm / FD No 1 675x400 mmxmm / FD No 1 Dia.: 225mm No 1

2.5 Duct-in mounted electric heater

All dampers and accessories shall be manufactured as per recognized codes,standards & technical specificationand full fill the requirments specified in the technical specification & shall meet the purpose.

Supply ,fix,test and commission volume dampers of approved quality as where shown on the drawings. Price shall include all the necessary accessories and connecting pieces.

Supply ,fix,test and commission spliter dampers of approved quality as where shown on the drawings. Price shall include all the necessary accessories and connecting pieces.

Supply ,fix,test and commission fire dampers of approved quality as where shown on the drawings. Price shall include all the necessary accessories and connecting pieces.



- Heating capacity = 1Kw Air flow : 128 liter/sec. Max. pressure drop/allowable/: 15 - 20 pascale No 1

Supply,fix,test & commission duct in mounted electric air heater as per the drawings shown & manufacturer's instruction,complete with all necessary accessories.


Division 4 - ELECTRICAL of 148

SPEC UNIT

REF ITEM DESCRIPTIONUNIT QTY. PRICE

Item Descripition Unit Qty. Rate TotalSupply and Install

1

No 1

2

ml 12

3

No 1

4

LS

5 Distribution Boards

1 pc MCCB main switch of 3x400A 3 pcs mcb 3x60A 1 pc mcb of 3x40A 6 pcs mcb of 3x32Aall complete and ready for use No 1

1 pc main switch of 3x63A 1 pc mcb of 3x32A 15 pcs mcb of 1x16A 1 pc power contactor of 3x20A 8 pcs tumbler switches of 1x16A 1 pc bypass switch of 3X16A No 1

1 pc main switch of 3x50A 3 pcs mcb of 1x16A 1 pc thermal magnetic circuit breaker of (3X(2.5….4)A 2 pcs ditto but breakers of 3X(6….10)A 1 pc ditto but breakers of 3X(6….10)A 2 pcs ditto but breakers of 3X(4…6.3)A 2 pcs mcb of 1x10A 4 pcs power contactors of 3X10A 1 pc power contactors of 3X40A 2 pcs adjustable pressure switches 1 pc time switch of 2 contacts main switch of 3X10Aall complete and ready for use No 1


Underground PVC conduit2 of 3X110mm diameter for reticulation of electric power cables. Price to include all related vearth works ans sand bedding

Earthing electrode of 16mm diameter and 1200mm in length, in hard drawn copper rod to be provided at the location shown on the electrical drawing. Price to include lead cable of 90mm2 connecting the ground bar of MDB- GF to the grounding electrode

1.4) Allow a provisional sum for EEPCO's incoming underground electric power cables and provision of the kilowatt hour meters as shown on the electric riser diagram

5.1) Floor standing MDB-GF in sheet steel housing with lockable door, bus bars, cover plates and PNE terminals, consisting of:

5.2) Surface mounted lighting and power panel (LPP-GF) in sheet steel housing with lockable door, bus bars, cover plates and PNE terminals consisting of:

5.4) Surface mounted motor control center (MCC-BF) in sheet steel housing with lockable door, bus bars, cover plates and PNE terminals consisting of:

5.5) Ditto as item 5.4 just above but lighting and power panel (LPP-1F) consisting of:




1

No 1

Manhole of 80X80X70cm internal dimensions in 20cm solid block walls and cast iron cover. The internal walls to receive two coats of plaster in cement - sand mortar (1:3) 1 pc main switch of 3x32A 14 pcs mcb of 1x16A No 1



1 pc main switch of 3x32A 11 pcs mcb of 1x16ASimilar panels are: LPP-4F and LPP-5F No 3

1 pc main switch of 3x60A 1 pc mcb of 3x40A 9 pc mcb of 1x16A No 1

1 pc main switch of 3X40A 1 pc mcb of 3x20A 2 pcs mcb of 3x16A 1 pc mcb of 3x10A 12 pcs mcb of 1X16A 1 pc master dimmer switch of 2500W No 1

1 pc main switch of 3X60A 2 pcs mcb of 3x32A 1 pc mcb of 3x10A 3 pcs mcb of 1x16A 1 pc mcb of 1x10A 1 pc time switch 2 pcs thermal magnetic circuit breaker of 3X(4….6.3A No 1

6 Electric Lighting

No 580

5.6) Ditto ditto but lighting and powr panel (LPP-MF) consisting of:

5.7) Ditto ditto but lighting and power panel (LPP-2F) modules consisting of:

5.8) Ditto ditto but lighting and power panel (LPP-3F) consisting of:



5.11) Ditto as item 4.10 just above butlift control board (LCB) consisting of:

6.1) Light points fed through PVC insulated conductors of 2/3.2.5mm2 in thermoplastic conduits of diameter 13/16mm, including flush mounted switch boxes of 60mm diameter, other junction boxes with covers as required and screw type insulating caps.

6.2) Flush mounted lighting switches type Legrand Suno type or equivalent :




1

No 1

Manhole of 80X80X70cm internal dimensions in 20cm solid block walls and cast iron cover. The internal walls to receive two coats of plaster in cement - sand mortar (1:3) - One - gang one - way (single) No 84 - Two - gang one - way( double) No 49 - Two - way No 26 - Intermediate No 5 - Triple switch No 3 - Dimmer No 4 - Llighting push-buttons No 10

7 Socket Outlets

No 49

No 172

No 2

No 18

No 1

No 2

No 2

ml 2

8 Internal Main Feeder Lines

ml 120ml 150

ml 20

ml 10

ml 16

7.1) Flush mounted socket outlets of 1x16A , 2P with earth lateral contacts, complete with cover plates and frames (type Suno 7740 23 or equivalent) fed through PVC insulated conductors of 3x2.5mm2 in thermoplastic conduits of 16mm diameter, complete with all wiring accessories.

7.2) Ditto as item 7.1) just above but double socket outlets

switches

7.4) Hand drier outlets fed through PVC insulated conductors of 3x2.5mm2 in thermoplastic conduits of 16 mm diameter , complete with all wiring accessories

7.4) Iindustrial 3 phase socket outlet fed through PVC insulated conductors of 5x2.5mm2 in thermoplastic conduits of 16 mm diameter, complete with all wiring accessories

7.5) Dish washing machine outlet fed through PVC-insulated and sheathed cable of 5X2.5mm2 in recessed thermoplastic conduit of 21mm diameter

7.6) Coffee machine outlet fed through PVC-insulated and sheathed cable of 5X2.5mm2 in recessed thermoplastic conduit of 21mm diameter

7.7) Electric oven outlet fed through PVC-insulated and sheathed cable of 5x4mm2 in recessed thermoplastic conduit of 23mm diameter

The cables are PVC insulated and sheathed ones running partially on cable tray and partially in cable riser shafts and supported by cable saddles at appropriate intervals8.1) 4x10/6mm2

8.2) 4X16/10mm2

8.3) cable of 4X16/10mm2 paritially running in cable riser shaft and partially in recessed thermoplastic conduit of 32mm diameter, running from LPP-GF to MCC BF8.4) Cables of 4x10/6mm2 in recessed thermoplastic conduits of 36mm diameter running to fire pumps8.5) Cables of 5x2.5mm2 in recessed thermoplastc conduits of 23mm diameter running to domestic water pumps




1

No 1


ml 5

ml 20

9 Electric Light Fittings with Lamps

No 7

No 66

No 29

No 237

No 22

No 138

No 10

No 23

No 20

No 5

No 7

ml 200

No 1

10 Telephone and Data Systems

No 1

8.6) Cables of 5x1.5mm2 in recessed thermoplastic conduits of 19mm diameter running to jockey pump 8.7) Cables of 5x1.5mm2 in recessed thermoplastic conduits of 19mm diameter running to sewage pump

Type 1 - Water-proof ceiling luminaire type Philips Pacific TCW 215 with 1xTL-D36/380 lamp or equivalent

Type 2 - Water-proof ceiling luminaire type Philips Pacific TCW 215 with 2X'TL'D-36/830 W Ditto as type 1 just above but wall mounted or equivalent.

Type 3 - Surface mounted ceiling luminaire type Philips TCS 398 with 2xTL-D 36/830W lamps with IC gear and C6 reflector or equivalentType 4 - Surface mounted ceiling luminaire type Philips TCS 398 with 4xTL-D 36/830W lamps with IC gear and C6 reflector or equivalent

Type 5 - Wall luminaire type DISANO 408 Wing with FL 1X18 W lamp or equivalent.

Type 6 - Ceiling luminaire type RZB art. 211006.002 with 75W inacdescent lamp or equivalent

Type 7 - Wall luminaire with eyelid shield type RZB. 58125.002 with A60 75W lamp or equivalent.

Type 8 - Surface mounted downlight type 931043.002 with A60 W lamp or equivalent.

Type 9 - Compact ceiling luminaire type DISANO 785 Compact with FL 2x26D lamps or equivalent.

Type 10 - Surface mounted down light type RZB art. 921384.774 with HIT-CE-of 150 W lamp or equivalent.

Type 11 - Surface mounted downlight typeRZB art. 91154.002 with PAR 38 120W lamp or equivalent.

Type 12 - Continous linear lighting strips

Type 13 - Chandlier with 30 lamps of 60W each or equivalent

10.1) Manhole of 60x60x70cm internal dimensions and in solid block walls and reinforced concrete cover. The internal walls to receive two coats of plaster in cement-sand mortar (1:3). Price to include all related earth works




1

No 1


ml 6

P.S

No 141

No 126

No 24

11 Sound System

No 8

12 TV Aerial System

No 2

No 2

13 Lightiing Arrester System

ml 150

No 1

10.2) Underground PVC pipe of 110mm diameter for ETC's primary cable intake. Price to include all related earth works and concrete cover of 10cm thickness with nominal reinforcement

10.3) Allow a provisional sum for the intake ETC's primary telephone cable of 100 pairs, internal wiring and provision of telephone apparatuses10.4) Flush mounted RJ 12 telephone socket outlets type Legrand Suno or equivalent, including thermoplastic conduits of 19mm minimum diameter for recessed installation

10.5) Ditto as item 10.4 above but RJ 45 data outlets in thermoplastic conduits, the sizes of which are indicated on the electrical drawings

10.6) Ditto as item 10.4 above but without thermoplastic conduits, the outlets to be mounted on cable trunkings

N.B.1) Supply and installtion of data cables and equipments shall be undertaken by the specialized contractor to be chosen by a selected bid at a later stage

N.B.2) Regarding CCTV system, only PVC conduits have been indicated on the electrical drawings. The CCTV system shall be undertaken as part and parcel of the data system referrred to under item 1 just above

11.1) Speaker points fed through recessed thermoplastic conduits of 13mm diameter running from sound console points to column mounted speaker outlets. Cabling and other audio equipments to be supplied by others

12.1) Flush mounted TV aerial outlet box of 60mm diameter and screwed-on cover and thermoplastic conduit of 23mm diameter running from TV outlet points to vertical cable riser shaft

12.2) Ditto as item 12.1 just above but the recessed thermoplastic conduit running from TV outlets in thje multi-purpose hall on the seventh floor and coffe shop on the sixth floor to roof level

13.1) Air terminations in copper bar of 3x25mm mounted on appropriate copper saddles/supports to be provided at intrervals of not more than 1 meter

13.2) Taper pointed air rod in copper rod of 16mm diameter and 2 meter length, complete with fixing and connection accessories




1

No 1


Ls

No 8

No 8

14 Passenger Elevators

No 1 - Lift speed………………………….1.6m/sec - Power…………………………..….19HP - Rated load………………. ……….800 Kg - Clear entrance ………………….900 mm - Exterior car width ……………….1400mm - Exterior car depth ……………….1350mm - Exterior car height……………….2045mm - pit depth.. ……………………….1300 mm - Clear overhead…………………. 3800 mm

15 Miscellaneous

ml 10

ml 40

ml 50

13.3) For down conductors, steel reinforcement bars in concrete coloumns as shown on the electrical drawing No 10/10 are to be utilized. Price to be quoted for welding works involved and bondage with air termination copper tapes. The totalcross section of the bars to be used should not be less than 80mm2 for each down conductor

13.4) Oblong test or junction clamps to be located on concrete columns at the height of 150cm above finished floor level of second basement

13.5) Earth rod in hard drawn copper rod of 16mm diameter and 2400mm length each, for direct driving in soft ground and same to be provided with concrete inspection pit of 320x320x210mm external dimensions. Price to include starnded copper wires running in rigid thermoplastic conduit of 16mm diameter for recesssed installation from the oblong test points to the earthing electrodes, connection with the later to be with thermoweld

14.1) Supply and install interlocked twin passenger elevators for 10 persons, in stainless steel cabin and 2 leaf sliding doors and 12 landings, all complete and ready for use

15.1) Recessed rigid thermoplastic conduits of 19mm diameter running from LPP-7F located in cable riser shaft to future neon light locations on roof tops. The conduits to be provided with pull wires cords

15.2) PVC insulated and sheathed cable of 2x1.5mm2 running from MCC-BF to float switches in ground and roof mounted water tanks, the cables mostly running in riser cable shaft, access to the float switches being in recessed thermoplastic conduits of 13mm diameter

N.B Installation of water pumps to be undertaken on the basis ofr technical data to be provided under the mechanical/sanitary scope of works

15.3) DLP aluminium trunking of 50x105 mm with 2 partitions, complete with accessories, and to be used for electric power, telephone and data cables reticulations




1

No 1


- cable tray of 5x500mm ml 12 - cable tray of 5x300mm ml 16

a) Rigid PVC of diameter 16mm for recessed installation ml 1 b) Diameter 19 mm ml 1 c) Diameter 23 mm ml 1 d) Diameter 32 mm ml 1 e) Diameter 40 mm ml 1 e) Diameter 50 mm ml 1

Total Carried to Summary

15.4) Cable trays in galvanized sheet steel suspended from ground floor ceiling slab with galvanized steel rods provided at intervals of not more than 150cm and the following width:

15.5) Unit prices to be filled for future application of payments to the would-be contractor. Please note that the these unit prices not to be included in the tender unit prices

Re-barø6 1888ø8 1380 2498 2094 2481ø10 1227 2112 1141 551ø12 1974 2653 1869 889ø16 6410 2426 4709 2544ø20 29,639.00 420 3263 2600 2318ø24 2059 5135 7118 5712

2499 5520 437 4717

Total volume of Concrete 2518

cement 9215.88 1151.985sand 1309.36 163.67aggregates 1964.04 245.505

1433 9353 1295 1295 1295 1295 2034 198881917 2619 2619 2619 2619 2619 2595 668 20756

- - 1402 1953422 408 408 408 408 408 408 3794 7553

1962 2064 2064 2064 2064 2064 2064 3089 199791470 1208 1208 1208 1208 1208 1208 1402 124385167 5760 5760 5760 5760 5760 5760 5710 51149

4190 4813 4813 4813 4813 4375 4375 36909170625

24862594.5

244.125944.125

2497.3751554.75

6393.6254613.62521328.13

helen schedule 2

Documents