henkel industrial solutions selector · pdf filehenkel industrial solutions selector guide ......
TRANSCRIPT
Henkel Industrial Solutions Selector GuideAdhesives, Sealants, Metal Pretreatments, Coatings, Cleaners and Metalworking Fluids
Introduction to Henkel’s
Industrial Solutions
At Henkel Corporation, we provide solutions to industry’s biggest challenges. We are dedicated to understanding the markets we serve and developing partnerships that stand the test of time.
But just how well do you know Henkel? Our customers have long recognized us as the leader in surface treatment, sealant, adhesive and metalworking lubricant technologies. You should also know that we now offer:
• Products that manage the stress and strain energies of an assembly, allowing it to flex, reduce fatigue and absorb shock without damage.
• Products that manage noise, vibration and harshness, reducing airborne and structure-borne noises.
• Products that manage the intrusion of air, water, fuel and other elements into assemblies.
• Products that manage the structural vibration that travels through assemblies and is felt by occupants.
• Custom-engineered parts and components specifically designed for your application.
• Reliable, environmentally responsible and increasingly green products.
• Fully integrated equipment systems from standard shelf items to full turnkey systems.
Not every company can accommodate the technical staff and equipment necessary to compete in today’s challenging manufacturing environment. Our chemists and engineers work in partnership with customers to improve design, assembly, productivity and profitability. Whether a customer needs competent recommendations on chemical properties or a full-blown turnkey process design, Henkel provides solutions.
This selector will aid you in choosing the right solution and product for a wide range of common industrial challenges. For additional information on Henkel products, please contact us at (800) 521-1355.
Table of Contents
Henkel Brands ....................................... 2-3
MarkeTSAgriculture/Construction ........................ 4-5Appliance .............................................. 6-7Filter ...................................................... 8-9HVAC/Insulation ................................. 10-11Medical Devices & Equipment ............ 12-13Outdoor Power Equipment ................. 14-15Pump & Compressor .......................... 16-17Recreational Vehicle ........................... 18-19Smart Cards ...................................... 20-21Solar Energy ...................................... 22-23Specialty Vehicle ................................ 24-25Wind Energy ...................................... 26-27
ProduCTSSurface Preparation, Cleaning & Conversion Coating ............................ 28-35Autodeposition Coatings .................... 36-39Chemical Specialties .......................... 40-41Metalworking Fluids .......................... 42-47Hot Melt Adhesive Bonding ................ 48-53Structural Bonding ............................. 54-59Elastomeric Bonding & Sealing .......... 60-61 Potting, Molding & Encapsulating ....... 62-65Seam Sealing .................................... 66-67Energy, NVH & Fluid Management ...... 68-69Water-Based Adhesives ..................... 70-75Integrated Equipment Solutions ......... 76-77
ProduCT LISTIng and IndexAdditional Supporting Products .......... 78-79Index ................................................. 80-81
2
Beginning in the 1940’s, Adhesin® branded adhesives have represented a full range of water-based adhesives for various market segments and applications in the packaging industry. Adhesin® adhesives include homopolymers and copolymers dispersions and natural-based products: PVAC, PVOH and starch dispersion mixture, natural rubber, acrylic water-based adhesive, cellulose ester, cellulose.
Registered as a trademark in 1946 as the conversion coating for aluminum substrates, Alodine® is a series of conversion coatings to improve paint adhesion and provide corrosion protection for light metal substrates that consists of metal pretreatments and post rinses for light metal pretreatments.
The autodeposition coating process is a more simple, cost-effective and environmentally responsible way of applying a functional anti-corrosive organic paint layer to metal substrates by means of a chemical, rather than an electrically driven reaction. Aquence® products include Waterborne Organic Coatings and related metal pretreatment (chemical cleaners and rinses) products.
S ince the early 1930’s, Bonderite® was well established in the automotive and metalworking industries as the conversion coating processes and chemistries to improve paint adhesion, corrosion protection and wear resistance to ferrous-based alloys, mixed metal alloys and plastic surfaces. The products that make up the Bonderite® brand include process line chemistries, cleaners, pretreatment chemistries including activators and conditioners, conversion coating chemistries, post treatment chemistries (including rinses and passivation), as well as auxiliary products including toner, additives, accelerators and neutralizer.
The brand name Dorus® (an acronym of the founder’s grandson’s name Doktor Rudolf Schieber) was registered in 1935 and includes adhesives and systems for the woodworking and furniture industry. Dorus® branded adhesives include hot melts (PUR, PO, PA, EVA); 3D dispersions (PU), dispersions (PVAc, EVA) and urea resin glues; one- and two-component reactive adhesives (PU); and solvent-based adhesives.
For more than 30 years, Macromelt® adhesives have been known as engineered hot melt adhesives for industrial applications in various market segments. These adhesives are thermoplastic 100% solids and include polyamide (PA) and polyolefin (PO) hot melts.
Alodine®
Henkel is a leader with brands and technologies that make people’s lives easier, better and more beautiful.
With superior brands and the technologies they represent, our innovations continue to help shape the future of the industrial manufacturing market.
3
O riginally launched in 1967, these structural and semi-structural adhesives are used in the manufacture of industrial goods and attributes for the cable industry. Macroplast® branded products include one- and two-component polyurethanes (PU), PU elastomers, PU hot melts, one- and two-component epoxy, and solvent-based contact adhesives and cleaners.
S ince the early 1970’s, Multan® branded products have been synonymous with metal removal and forming lubricants. From liquids to pastes, these water-miscible and non-water-miscible products are used in manual and automated application systems. Multan® branded products are available in fully synthetic, semi-synthetic, soluble or straight oil formulations.
Registered in 1894, the P3® brand didn’t begin to represent cleaners until the late 1920’s. These cleaners are for metallic and nonmetallic surfaces, fouling prevention and corrosion protection together with disinfection of water, and use with wastewater treatments. These products are liquid/powdery products designed for use in low and high temperature applications at different pH ranges (acid, neutral and alkaline), and in high-pressure applications, depending on customer conditions.
O riginally launched in 1989, these reactive polyurethane hot melts are used in a wide range of high-end assembly bonding applications.
F irst introduced into industrial assembly applications in 1975, Technomelt® branded hot melts have been used for consumer packaged goods and general industrial applications. These hot melt adhesives are thermoplastic 100% solids, non-reactive conventional technology, and have open times ranging from short to permanent pressure sensitive.
Teroson® branded products have been around since the turn of the 20th century and include adhesives, sealants, coatings and parts for automotive assembly, auto aftermarket and general industrial manufacturing. Teroson® branded products include cleaners; epoxy adhesives; EVA adhesives; MS sealants and adhesives; polyurethane sealants and adhesives; PVC sealants, adhesives and coatings; rubber sealants and adhesives; silicone sealants; and water-based adhesives, sealants and coatings.
4
agriculture/Construction equipment
OverviewFarming, mining, and construction equipment must operate reliably and efficiently under some of the worst imaginable conditions. Equipment manufacturers are always looking for ways to extend usable working life, improve overall aesthetics and increase robustness. Henkel has developed a wide range of products that simplify assembly, extend paint life, minimize part fatigue and increase operator comfort.
For cab enclosures, our seam sealing and Noise Vibration Harshness (NVH) technologies help control the elements that pass through the cab and affect the ultimate comfort of the operator – from weather to noise, shock and vibration.
Featured Products
Aquence• ® 930™ – extreme corrosion protective coating – Page 38
Bonderite• ® NT-1™ – phosphate-free conversion coating – Page 31
Multan• ® B-204™ – semi-synthetic metal removal fluid – Pages 42, 43
Terophon• ® 21007™ – injection molded expanding NVH foam – Pages 68, 69
Terostat• ® MS 930™ – adhesive/sealant for elastic bonding – Pages 60, 61, 68, 69
Henkel’s Terostat® adhesive technologies have been specially formulated to bond and seal
dissimilar substrates for multiple cab applications ranging from plastic to metal bonding.
MA
rk
et
SA
Gr
ICu
ltu
re
/C
on
St
ru
Ct
Ion
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
5
Category Pages
Surface Preparation, Cleaning & Conversion Coating 28 - 35
autodeposition Process 36 - 39
Metalworking Fluids 42 - 47
Hot Melt adhesive Bonding 48 - 53
Structural Bonding 54 - 59
elastomeric Bonding & Sealing 60 - 61
Potting & encapsulating 62 - 65
Seam Sealing 66 - 67
reinforcing 68 - 69
Vibration damping 68 - 69
air/Water & energy Management 68 - 69
Water-Based adhesives 70 - 75
reinforcing
Hot Melt adhesive BondingStructural Bonding
Metalworking Fluids
air/Water & energy Management
Surface Preparation, Cleaning & Conversion Coating
Seam Sealing
Vibration damping
Water-Based adhesives
MA
rk
et
SA
Gr
ICu
ltu
re
/C
on
St
ru
Ct
Ion
autodeposition Process
6
appliance
OverviewHenkel offers a range of products used in appliance assembly, from low VOC stamping lubricants for dishwasher panels to UL-approved sealants that resist unsightly crazing to water-based, spray-applied adhesives for multi-substrate bonding.
Our low temp cleaners, nanotechnology coatings, and plastics cleaners help our customers reduce their carbon footprints, greenhouse gas emissions and overall energy consumption. Our bio-resistant metalworking products reduce waste, improve in-plant working conditions and lengthen expensive tool life.
Featured Products
Bonderite• ® NT-1™ – phosphate-free conversion coating – Page 31
P3• ® Polyprep® 110™ Cleaner – low temp plastics cleaner – Page 40
Adhesin• ® 56-5545™ – water-based insulation adhesive – Pages 72, 73
Terostat• ® MS 930™ – adhesive/sealant for elastic bonding – Pages 60, 61, 68, 69
Multan• ® F 6740™ – a synthetic metal forming lubricant – Pages 44, 45
Henkel’s surface treatment products prepare metal and plastic surfaces prior to paint to
create a lasting finish.
MA
rk
et
SA
PP
lIA
nC
e
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
7
Seam Sealing
Surface Preparation, Cleaning & Conversion Coating
Water-Based adhesives
Structural Bonding
reinforcing
Metalworking Fluids
Hot Melt adhesive Bonding
air/Water & energy Management
Vibration damping
MA
rk
et
SA
PP
lIAn
Ce
Potting & encapsulating
Category Pages
Surface Preparation, Cleaning & Conversion Coating 28 - 35
autodeposition Process 36 - 39
Metalworking Fluids 42 - 47
Hot Melt adhesive Bonding 48 - 53
Structural Bonding 54 - 59
elastomeric Bonding & Sealing 60 - 61
Potting & encapsulating 62 - 65
Seam Sealing 66 - 67
reinforcing 68 - 69
Vibration damping 68 - 69
air/Water & energy Management 68 - 69
Water-Based adhesives 70 - 75
8
Filter
OverviewHenkel offers a range of adhesives, lubricants, and surface preparation products used to fabricate, assemble, and extend the life cycle of the world’s finest filters. Our products reduce process complexity and minimize downtime.
For filter can processing, our deep draw lubricants reduce thinning and splitting. For filter media bonding, our UL-certified, VOC-free adhesives are environmentally responsible and easy to apply. Our latest innovations include tack-free hot melts that allow high speed first-last pleat bonding, and toughened foaming assembly adhesives for fuel resistant filter designs.
Featured Products
Adhesin• ® 56-5531™ – water-based assembly adhesive – Pages 72, 73
Macromelt• ® 2384™ – fuel/oil resistant hot melt adhesive – Pages 48, 49
Multan• ® F 985™ – semi-synthetic metal-forming fluid – Pages 44, 45
Bonderite• ® TecTalis® – phosphate-free conversion coating – Page 31
From draw compounds for metal filters to hot melt adhesives for pleating and end cap potting,
Henkel has the right product from end to end.
MA
rk
et
SFI
lte
r
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
9
Metalworking Fluids
Surface Preparation, Cleaning & Conversion Coating
Water-Based adhesive
MA
rk
et
SFIlt
er
Structural Bonding
Category Pages
Surface Preparation, Cleaning & Conversion Coating 28 - 35
autodeposition Process 36 - 39
Metalworking Fluids 42 - 47
Hot Melt adhesive Bonding 48 - 53
Structural Bonding 54 - 59
elastomeric Bonding & Sealing 60 - 61
Potting & encapsulating 62 - 65
Seam Sealing 66 - 67
reinforcing 68 - 69
Vibration damping 68 - 69
air/Water & energy Management 68 - 69
Water-Based adhesives 70 - 75
Potting & encapsulating
Hot Melt adhesive Bonding
10
HVaC/Insulation
OverviewHenkel provides reliable, environmentally responsible adhesive, sealant, metalworking and surface treatment technologies for HVAC/insulation manufacturers. Used for bonding, seam sealing, lubricating, and vibration control, our HVAC products include flexible duct adhesives, VOC-free insulation adhesives, structural adhesives, weather-tight sealants, NVH management systems, and surface treatment coatings for metal parts.
Our latest innovations include low-VOC fin lubricants, fast-setting assembly adhesives, green nano-based multi-metal pretreatments, and the world’s first extreme corrosion-resistant electroceramic coating for aluminum components.
Featured Products
Alodine• ® EC2™ – extreme corrosion protective coating – Page 34
Bonderite• ® NT-1™ – phosphate-free conversion coating – Page 31
Multan• ® PL 1439™ – low-VOC fin stamping lubricant – Pages 44, 45
Bonderite• ® TecTalis® – phosphate-free conversion coating – Page 31
Adhesin• ® XA-7594™ Black – UL-approved laminating adhesive for flexible ducting – Pages 70, 71
Adhesin• ® XA-7597™ – UL-approved laminating adhesive for flexible ducting – Pages 70, 71
Bondmaster• ® 40-452A™ – water-based insulation adhesive – Pages 70, 71
Bondmaster• ® 40-0880™ – water-based insulation adhesive – Pages 70, 71
Henkel’s metalworking fluids are used with the Appli-Coater® system to produce cooling
fins in the HVAC industry.
MA
rk
et
SH
VAC
/In
Su
lAt
Ion
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
11
Structural Bonding
Seam Sealing
Vibration damping
Water-Based adhesives
MA
rk
et
SH
VAC
/InS
ulA
tIo
n
Surface Preparation, Cleaning & Conversion Coating
Metalworking Fluids
Category Pages
Surface Preparation, Cleaning & Conversion Coating 28 - 35
autodeposition Process 36 - 39
Metalworking Fluids 42 - 47
Hot Melt adhesive Bonding 48 - 53
Structural Bonding 54 - 59
elastomeric Bonding & Sealing 60 - 61
Potting & encapsulating 62 - 65
Seam Sealing 66 - 67
reinforcing 68 - 69
Vibration damping 68 - 69
air/Water & energy Management 68 - 69
Water-Based adhesives 70 - 75
12
Medical devices & equipment
OverviewTo bring today’s increasingly complex medical equipment, device and utensil designs to life, Henkel offers 132 years of experience in the industry. Our metalworking fluids provide the precision required when cutting utensils are forged, ground and polished. Our assembly adhesives allow medical device manufactures to bond difficult substrates without mechanical fasteners, welds or brazing. For medical devices, our products help form, coat and protect against wear and tear.
Featured Products
Alodine• ® EC2™ – extreme corrosion protective coating – Page 34
Aquence• ® 930™ – extreme corrosion protective coating – Page 38
Multan• ® B-400™ – semi-synthetic metal removal fluid – Pages 42, 43
Henkel’s metal removal lubricants are used in precision grinding applications to create precise
instruments for the medical industry.
MA
rk
et
SM
ed
ICA
l d
eV
ICe
S
& e
qu
IPM
en
t
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
13
Metalworking Fluids
Hot Melt adhesive Bonding
Structural Bonding
MA
rk
et
SM
ed
ICA
l de
VIC
eS
&
eq
uIP
Me
nt
Water-Based adhesives
Surface Preparation, Cleaning & Conversion Coating
Category Pages
Surface Preparation, Cleaning & Conversion Coating 28 - 35
autodeposition Process 36 - 39
Metalworking Fluids 42 - 47
Hot Melt adhesive Bonding 48 - 53
Structural Bonding 54 - 59
elastomeric Bonding & Sealing 60 - 61
Potting & encapsulating 62 - 65
Seam Sealing 66 - 67
reinforcing 68 - 69
Vibration damping 68 - 69
air/Water & energy Management 68 - 69
Water-Based adhesives 70 - 75
14
outdoor Power equipment
OverviewOutdoor power equipment such as lawnmowers, snowblowers, generators and chainsaws must reliably perform in challenging conditions that include torrential rains, blistering heat, and frigid temperatures. Our coatings, treatments, adhesives, and sealants help deliver the required robustness, power, performance and dependability.
From precision cutting lubricants to temperature-resistant adhesives, Henkel products streamline the manufacturing process and reduce material consumption. Our coatings, adhesives and sealants extend paint life, resist corrosion, and ensure reliability throughout the life of your equipment.
Featured Products
Alodine• ® EC2™ – extreme corrosion protective coating – Page 34
Aquence• ® 930™ – extreme corrosion protective coating – Page 38
Bonderite• ® NT-1™ – phosphate-free conversion coating – Page 31
Multan• ® B-400™ – semi-synthetic metal removal fluid – Pages 42, 43
P3• ® Polyprep® 110™ Cleaner – low temp plastics cleaner – Pages 40
Terokal• ® 4555B™ – structural bonding adhesive – Pages 58, 59, 68, 69
Multan• ® F 2004™ – synthetic metal forming lubricant – Pages 44, 45
Henkel’s metalworking and plastics cleaners are used throughout the industry on a host
of products to produce lasting results in harsh environments.
MA
rk
et
So
ut
do
or
Po
we
r
eq
uIP
Me
nt
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
15
Metalworking Fluids
Structural Bonding
Vibration damping
reinforcing
Water-Based adhesives
Seam Sealing
Surface Preparation, Cleaning & Conversion Coating
Hot Melt adhesive Bonding
MA
rk
et
So
ut
do
or
Po
we
r
eq
uIP
Me
nt
Surface Preparation, Cleaning & Conversion Coating
Category Pages
Surface Preparation, Cleaning & Conversion Coating 28 - 35
autodeposition Process 36 - 39
Metalworking Fluids 42 - 47
Hot Melt adhesive Bonding 48 - 53
Structural Bonding 54 - 59
elastomeric Bonding & Sealing 60 - 61
Potting & encapsulating 62 - 65
Seam Sealing 66 - 67
reinforcing 68 - 69
Vibration damping 68 - 69
air/Water & energy Management 68 - 69
Water-Based adhesives 70 - 75
16
Pump & Compressor
OverviewPumps and compressors operate in extremely corrosive environments, delivering power and pressure on demand. From appliance compressors to industrial water pumps, manufacturers rely on Henkel metalworking fluids, surface treatments, metal cleaning fluids, and assembly adhesives to cut, form, shape, and assemble these hard-working machines. Our seam sealants and NVH products protect these machines and keep them running smoothly without damage from vibration.
Featured Products
Bonderite• ® NT-1™ – phosphate-free conversion coating – Page 31
Macromelt• ® 2384™ – fuel/oil resistant hot melt adhesive – Pages 48, 49
Multan• ® B-204™ – semi-synthetic metal removal fluid – Pages 42, 43
Multan• ® B-414™ – low foam semi-synthetic removal fluid – Pages 42, 43
Multan• ® F 2004™ – synthetic metal forming lubricant – Pages 44, 45
Multan• ® PL 298™ – hydroforming-die side, replace chlorinated oils, heavy stampings – Pages 44, 45
Alodine• ® EC2™ – extreme corrosion protective coating – Page 34
Terokal• ® 4555B™ – structural bonding adhesive – Pages 58, 59, 68, 69
Henkel’s precision grinding and heavy forming lubricants keep pump and compressor
manufacturers running smooth and clean.
MA
rk
et
SP
uM
P &
C
oM
Pr
eS
So
r
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
17
Surface Preparation, Cleaning & Conversion Coating
Vibration dampingStructural Bonding
Metalworking Fluids
MA
rk
et
SP
uM
P &
C
oM
Pr
eS
So
r
Seam Sealing
Category Pages
Surface Preparation, Cleaning & Conversion Coating 28 - 35
autodeposition Process 36 - 39
Metalworking Fluids 42 - 47
Hot Melt adhesive Bonding 48 - 53
Structural Bonding 54 - 59
elastomeric Bonding & Sealing 60 - 61
Potting & encapsulating 62 - 65
Seam Sealing 66 - 67
reinforcing 68 - 69
Vibration damping 68 - 69
air/Water & energy Management 68 - 69
Water-Based adhesives 70 - 75
18
recreational Vehicle
OverviewFrom chassis to roof system, end cap to front bumper, Henkel adhesives, sealants, and surface treatments help make RV designs more reliable, dependable, and comfortable. Our solutions range from metal pretreatment systems for frames to adhesives for panel laminations to plastic cleaners for paint preparation. Our products reduce rattles and noises, minimize water leakage, seal out weather, and improve the structural strength of these homes on wheels.
Featured Products
Bonderite• ® NT-1™ – phosphate-free conversion coating – Page 31
Macroplast• ® SIA-110™ – laminating moisture cure adhesive – Page 56, 57
P3• ® Parcosol® 283™ Wipes – aluminum wipes for cleaning – Page 41
P3• ® Polyprep® 110™ Cleaner – low temp plastics cleaner – Page 40
Terokal• ® 4555B™ – structural bonding adhesive – Pages 58, 59, 68, 69
Henkel Hot Melt adhesives are key to a lasting laminated wall and are designed to bond
dissimilar materials as in wall manufacturing.
MA
rk
et
Sr
eC
re
At
Ion
Al
Ve
HIC
le
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
Henkel is proud to feature the FIBRECYCLE™ K.E.G. (Keep Earth Green) Packaging Solution – a 100% recyclable drum for many of our PUR-FECT LOK™ and PURMELT® panel laminating adhesives.
19
reinforcing
air/Water & energy Management
Surface Preparation, Cleaning & Conversion Coating
Seam Sealing
Vibration damping
Metalworking Fluids
Hot Melt adhesive Bonding Structural
Bonding
Water-Based adhesives
MA
rk
et
Sr
eC
re
At
Ion
Al
Ve
HIC
leCategory Pages
Surface Preparation, Cleaning & Conversion Coating 28 - 35
autodeposition Process 36 - 39
Metalworking Fluids 42 - 47
Hot Melt adhesive Bonding 48 - 53
Structural Bonding 54 - 59
elastomeric Bonding & Sealing 60 - 61
Potting & encapsulating 62 - 65
Seam Sealing 66 - 67
reinforcing 68 - 69
Vibration damping 68 - 69
air/Water & energy Management 68 - 69
Water-Based adhesives 70 - 75
20
Smart Cards
OverviewSmart cards can be simple readable electronic ID badges or complex storage, retrieval and cataloging systems. In smart card manufacturing, Henkel adhesives are used to laminate layers of thin plastic films and to attach microprocessors. As a final step, our surface treatments can be used to clean and prepare the card for printing. Henkel has helped expand the global smart card market by simplifying the manufacturing and laminating process.
Leading Product Chemistries
Polyurethane Adhesives•
Polyurethane Dispersions•
Polyamides•
Plastic Coatings•
Typical Applications Include
Layer Lamination•
Chip Bonding•
Scratch Resistant Coating•
Plastic Cleaning•
Henkel’s laminating adhesives are designed for permanent bonding of thin layers.
MA
rk
et
SS
MA
rt
CA
rd
S
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
Henkel’s custom formulating capabilities allow smart card manufacturers the flexibility to assemble difficult substrates.
21
Hot Melt adhesive Bonding
Surface Preparation, Cleaning & Conversion Coating
Water-Based adhesives
MA
rk
et
SS
MA
rt
CA
rd
S
Category Pages
Surface Preparation, Cleaning & Conversion Coating 28 - 35
autodeposition Process 36 - 39
Metalworking Fluids 42 - 47
Hot Melt adhesive Bonding 48 - 53
Structural Bonding 54 - 59
elastomeric Bonding & Sealing 60 - 61
Potting & encapsulating 62 - 65
Seam Sealing 66 - 67
reinforcing 68 - 69
Vibration damping 68 - 69
air/Water & energy Management 68 - 69
Water-Based adhesives 70 - 75
22
Solar energy
OverviewLeading solar technology companies turn to Henkel to formulate and deliver innovative compounds, solutions, and systems that reduce processing time, increase efficiency, and ease installation. Our R&D in the solar industry has allowed us to develop surface treatment products that make difficult substrates easier to bond, coating products that allow for extended solar panel life, and adhesives and sealants that facilitate assembly of photovoltaic modules and solar concentrators.
Featured Products
Alodine• ® EC2™ – extreme corrosion protective coating – Page 34
Bonderite• ® NT-1™ – phosphate-free conversion coating – Page 31
P3• ® Polyprep® 110™ Cleaner – low temp plastics cleaner – Page 40
Multan• ® F 2004™ – synthetic metal forming lubricant – Pages 44, 45
Terostat• ® MS 930™ – adhesive/sealant for elastic bonding – Pages 60, 61, 68, 69
Terostat• ® 2761™ – sealant for moisture barrier*
Purmelt• ® QR-4663™ – adhesive for junction box bonding – Pages 52, 53
Purmelt• ® Purfect Glaze 91-822A™ – adhesive for junction box attachment – Pages 52-53
Macromelt• ® 6208S™ – polyamide potting hot melt sealant – Pages 48, 49
* Currently available in Europe only, contact Henkel marketing for more information.
Henkel’s Terostat® branded sealants keep photovoltaic cells sealed from the
elements for lasting results.
MA
rk
et
SS
olA
r e
ne
rG
y
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
23
Structural Bonding
Metalworking Fluids
Surface Preparation, Cleaning & Conversion Coating
MA
rk
et
SS
olA
r e
ne
rG
y
Potting & encapsulating
Seam Sealing
Category Pages
Surface Preparation, Cleaning & Conversion Coating 28 - 35
autodeposition Process 36 - 39
Metalworking Fluids 42 - 47
Hot Melt adhesive Bonding 48 - 53
Structural Bonding 54 - 59
elastomeric Bonding & Sealing 60 - 61
Potting & encapsulating 62 - 65
Seam Sealing 66 - 67
reinforcing 68 - 69
Vibration damping 68 - 69
air/Water & energy Management 68 - 69
Water-Based adhesives 70 - 75
Hot Melt adhesive Bonding
24
Specialty Vehicle
OverviewAs specialty vehicles such as boom trucks, forklifts and portable warehouses become more advanced, so do the processes that go into manufacturing them. Henkel adhesives, sealants and surface treatments help reduce vehicle weight, decrease corrosion, improve aesthetics, and eliminate visible assembly fasteners. From environmentally responsible metal pretreatments to fracture toughened structural bonding adhesives, Henkel technology leads the way on these unique vehicles.
Featured Products
Bonderite• ® NT-1™ – phosphate-free conversion coating – Page 31
Alodine• ® 5700™ – aluminum conversion coating – Page 34
P3• ® Polyprep® 110™ Cleaner – low temp plastics cleaner – Page 40
Aquence• ® 930™ – extreme corrosion protective coating – Page 38
Macromelt• ® 2384™ – fuel/oil resistant hot melt adhesive – Pages 48, 49
Terokal• ® 4555B™ – structural bonding adhesive – Pages 58, 59, 68, 69
Henkel’s metal pretreatment technologies lead the industry in green, phosphate-free, conversion
coating systems such as Bonderite® NT-1™.
MA
rk
et
SS
Pe
CIA
lty
V
eH
ICle
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
25
Surface Preparation, Cleaning & Conversion Coating
Vibration damping
Structural Bonding
Seam Sealing
reinforcing
Metalworking Fluids
Hot Melt adhesive Bonding
air/Water & energy Management
Water-Based adhesives
MA
rk
et
SS
Pe
CIA
lty
V
eH
ICle
autodeposition Process
Category Pages
Surface Preparation, Cleaning & Conversion Coating 28 - 35
autodeposition Process 36 - 39
Metalworking Fluids 42 - 47
Hot Melt adhesive Bonding 48 - 53
Structural Bonding 54 - 59
elastomeric Bonding & Sealing 60 - 61
Potting & encapsulating 62 - 65
Seam Sealing 66 - 67
reinforcing 68 - 69
Vibration damping 68 - 69
air/Water & energy Management 68 - 69
Water-Based adhesives 70 - 75
26
Wind energy
OverviewHenkel offers innovative solutions for wind blade bonding, gearbox sealing and tower corrosion protection. Our reduced-VOC adhesives and sealants, energy saving surface preparation coatings, and weight-reducing reinforced structural products are shortening product development cycles, lowering carbon footprints, reducing fossil fuel consumption, and generating increasingly more efficient means to transport energy.
Featured Products
Alodine• ® EC2™ – extreme corrosion protective coating – Page 34
Bonderite• ® NT-1™ – phosphate-free conversion coating – Page 31
P3• ® Polyprep® 110™ Cleaner – low temp plastics cleaner – Page 40
Multan• ® B-400™ – semi-synthetic metal removal fluid – Pages 42, 43
Terostat• ® MS 939™ – adhesive/sealant for bonding – Pages 60, 61, 68, 69
Terostat• ® 2761™ – sealant for vacuum infusion process
Macroplast• ® UK-1340™ – polyurethane blade bonding adhesive – Pages 56, 57
Macroplast• ® UK-5401™ – polyurethane blade bonding hardener – Pages 56, 57
Application
Henkel’s structural urethane adhesive technology is used in blade bonding
specifically formulated to withstand the requirements of the wind energy industry.
MA
rk
et
Sw
Ind
en
er
Gy
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
27
Structural Bonding
Surface Preparation, Cleaning & Conversion Coating
air/Water & energy Management
Metalworking Fluids
Seam Sealing
Vibration damping
MA
rk
et
Sw
Ind
en
er
Gy
Category Pages
Surface Preparation, Cleaning & Conversion Coating 28 - 35
autodeposition Process 36 - 39
Metalworking Fluids 42 - 47
Hot Melt adhesive Bonding 48 - 53
Structural Bonding 54 - 59
elastomeric Bonding & Sealing 60 - 61
Potting & encapsulating 62 - 65
Seam Sealing 66 - 67
reinforcing 68 - 69
Vibration damping 68 - 69
air/Water & energy Management 68 - 69
Water-Based adhesives 70 - 75
28
Substrate etch Temperature Builders
ProductsLi
quid
Spra
y
Imm
ersi
on
Stee
l/He
avy
duty
alum
inum
/M
agne
sium
Mul
ti-M
etal
Heav
y et
ch
on a
l & Z
n
oper
atin
g Te
mpe
ratu
re
Sodi
um
Pota
ssiu
m
Phos
phat
e
gluc
onat
e
Inte
r-st
age
Prot
ectio
n
Parco® Cleaner 305™ X X X X X 100°F - 140°F X X X
Parco® Cleaner 319™ X X X X X 120°F - 180°F X X X
Parco® Cleaner HCS10™ X X X X X 140°F - 210°F X X X
Parco® Cleaner Zx-1™ X X X 120°F - 180°F X X X X
Parco® Cleaner Zx-3™ X X X X 140°F - 200°F X X X
ridoline® 412™ X X X X 130°F - 180°F X X
ridoline® rT-153™ X X X X X 80°F - 153°F X X X
ridoline® rT-163™ X X X X 80°F - 160°F X Low X
ridoline® rT-173™ & rT-173s™
X X X X 80°F - 160°F X X
alkaline CleanersApplied by spray, immersion and stripline units, these strong alkaline treatments are particularly recommended for use before Bonderite® processes. Alkaline cleaners are used to remove organic soils such as dirt, oils and grease.
Parco® Cleaner 305™ – Alkaline cleaner designed to prepare aluminum, steel, hot-dip galvanized and electrogalvanized steel surfaces.
Parco® Cleaner 319™ – Alkaline cleaner designed to prepare aluminum, steel, electrogalvanized and hot-dip galvanized surfaces to receive a conversion coating, or used prior to a plating operation.
Parco® Cleaner HCS10™ – A heavy duty alkaline cleaner for ferrous parts.
Parco® Cleaner Zx-1™ – Alkaline cleaner designed to prepare aluminum, steel, electrogalvanized and hot-dip galvanized surfaces to receive a conversion coating, or used prior to a plating operation.
Parco® Cleaner Zx-3™ – Alkaline cleaner designed to prepare ferrous surfaces to receive a conversion coating. Can be used to strip phosphate and lubed parts prior to a coating, plating or machining operation.
ridoline® 412™ – This concentrated alkaline cleaner, liquid, silicate-free, mildly alkaline cleaner removes oils and light oxide films from aluminum and its alloys.
ridoline® rT-153™ – A room temperature cleaner designed to prepare aluminum, steel, hot-dip galvanized and electrogalvanized steel surfaces.
ridoline® rT-163™ – A unique surfactant system able to clean tenacious soils at low temperatures; provides in-plant rust protection.
ridoline® rT-173™ & rT-173s™ – A two-package, low temp cleaning system effective in spray or immersion for the removal of metalworking fluids and soils.
aLkaLIne CLeaner aCId CLeaner ConVerSIon CoaTIngCondITIoner PoST TreaTMenT
Pr
od
uC
tS
Su
rFA
Ce
Pr
eP,
C
leA
nIn
G &
Co
AtIn
G
Henkel’s groundbreaking nanotechnology metal pretreatment products provide extended paint life, improved aesthetics and enhanced corrosion resistance for a range of industrial manufacturers. These continuous coating processes clean, convert surfaces, and seal metals while minimizing in-plant energy consumption, reducing waste, and lowering footprint requirements.
With more than 80 years of experience in surface treatment, Henkel has developed technologies for most ferrous, non-ferrous and polymer substrates. These products range from traditional iron phosphates to green, heavy metal and phosphate-free nanotechnologies that work on a variety of metals.
Surface Preparation, Cleaning & Conversion Coating
For a comprehensive list of package sizes and product offerings, call us at: 1-800-521-1355
NEW!
NEW!
NEW!
NEW!
29
acid CleanersAcid cleaners are used prior to conversion coating and are designed to remove inorganic soils such as weld and laser scale, and other oxides such as rust. Acid cleaners are also widely used as maintenance cleaners.
deoxidine® 182B™ – A phosphoric acid-based, detergent-type metal cleaner designed to remove rust and oxides left from laser cutting and welding on steel surfaces.
Parco® Cleaner 2530™ – This acidic cleaner is specifically formulated to remove scale from closed loop stainless steel heat transfer systems.
Parco® Purge 2520™ – This acid cleaner for heat-exchanger cleaning has an ambient operating temperature, is acidic, and is specifically formulated to remove scale from closed-loop stainless steel heat transfer systems.
deoxidine® a-500™ – This specially formulated inhibited liquid acid cleaner cleans power-spray processing equipment and relatively inaccessible areas (such as pump intakes), minimizing labor required for cleaning and prolonging equipment life.
Temperature Contents
Products
Liqu
id
Spra
y
Imm
ersi
on
Heav
y du
ty/f
or S
teel
oper
atin
g Te
mpe
ratu
re
Phos
phor
ic a
cid
Hydr
ochl
oric
aci
d
nitr
ic a
cid
Sulfu
ric
deoxidine® 182B™ X X X X Ambient - 180°F X
Parco® Cleaner 2530™ X X X 120°F - 150°F X
Parco® Purge 2520™ X X X Ambient X
deoxidine® a-500™ X X X Ambient X
aLkaLIne CLeaner aCId CLeaner ConVerSIon CoaTIngCondITIoner PoST TreaTMenT
Alodine®
Pr
od
uC
tS
Su
rFA
Ce
Pr
eP,
Cle
An
InG
& C
oAtIn
G
For a comprehensive list of package sizes and product offerings, call us at: 1-800-521-1355
30
Surface Preparation, Cleaning & Conversion Coating
aLkaLIne CLeaner aCId CLeaner ConVerSIon CoaTIngCondITIoner PoST TreaTMenT
Fixodine® M™ – A powdered conditioning agent used for articles of iron and steel, ahead of a Parco® Lubrite® treatment.
Prepalene™ x™ – This patented, easy to handle liquid conditioning rinse prepares iron, steel, aluminum, zinc and zinc-alloy surfaces for subsequent phosphate coating applications for use with zinc phosphate conversion coating systems.
application
Products
Liqu
id
Pow
der
Spra
y
Imm
ersi
on
Man
gane
se C
oatin
gs
Zinc
Coa
tings
Tem
pera
ture
ran
geFixodine® M™ X X X X Ambient - 180°F
Prepalene™ x™ X X X X Ambient - 120°F
ConditionersUse of these conditioners promotes the formation of a dense, fine-grained phosphate coating that is preferred as a paint base for the automotive industry, and offers superior adhesion and durability in corrosive environments. Surfaces may be treated individually or in mixed production by either spray or immersion processing.
Pr
od
uC
tS
Su
rFA
Ce
Pr
eP,
C
leA
nIn
G &
Co
AtIn
G
For a comprehensive list of package sizes and product offerings, call us at: 1-800-521-1355
31
Bonderite® nT-1™ – This zirconium-based nanotechnology provides a green alternative to traditional iron phosphate. It runs at low temperatures and is completely phosphate- and regulated heavy metal-free, to reduce energy consumption and waste removal.
Bonderite® TecTalis® – This zirconium-based nanotechnology provides a green alternative to traditional zinc phosphate. It runs at low temperatures and is completely phosphate- and regulated heavy metal-free, to reduce energy consumption and waste removal.
Substrate
Products
Spra
y
Imm
ersi
on
Stee
l
Zinc
alum
inum
Crys
tal T
ype
Tem
pera
ture
ra
nge
Bonderite® nT-1™ X X X X X Nano 55°F - 100°F
Bonderite® TecTalis® X X X X X Nano 55°F - 100°F
Phosphate-Free Conversion CoatingsAn environmentally responsible process that converts the metal surface to a nano-thin coating containing no heavy metals or phosphates. The metals may be treated individually or in mixed production.
aLkaLIne CLeaner aCId CLeaner ConVerSIon CoaTIngCondITIoner PoST TreaTMenT
Alodine®
Pr
od
uC
tS
Su
rFA
Ce
Pr
eP,
Cle
An
InG
& C
oAtIn
G
NEW!
For a comprehensive list of package sizes and product offerings, call us at: 1-800-521-1355
32
Surface Preparation, Cleaning & Conversion Coating
Iron Phosphate Conversion CoatingsThese processes convert the metal surface to a nonmetallic, iron phosphate coating that inhibits corrosion, and increases the adhesion and durability of paint finishes. These substantial increases in the life of the paint result from the fact that the coating provides a clean, grease-free/oil-free surface, corrosion-inhibiting base for paint, and a non-conducting bond between the base metal and the paint.
Five-Stage Products
Bonderite® 1090™ – This iron phosphate is for use in five-stage processes and imparts an amorphous, non-heavy metal phosphate conversion coating that treats steel and multi-metal substrates simultaneously.
Three-Stage Products
Bonderite® 1070™ – This iron phosphate is for use in three-stage processes, and formulated for spray and immersion application to steel, aluminum and zinc surfaces to simultaneously clean and develop a conversion coating.
Cleaner/Coater Products
Prep-n-Cote® 500 LT™ – This iron phosphate cleaner- and coater-in-one has been formulated for spray application of steel surfaces to simultaneously clean and coat metal surfaces.
Spray Wand Products
Parco® Spray Wand 200™ – Designed to simultaneously clean and impart an iron phosphate conversion coating on aluminum and zinc surfaces by use of a spray wand application.
Substrate acceleration Temperature
Products
Liqu
id
Spra
y
Imm
ersi
on
Spra
y W
and
Stee
l
Mul
ti-M
etal
orga
nic
Fluo
ride
Sufa
ctan
t
Tem
pera
ture
ra
nge
Five-Stage Products
Bonderite® 1090™ X X X X X X X 110°F - 150°F
Three-Stage Products
Bonderite® 1070™ X X X X X X X X 110°F - 150°F
Cleaner / Coater Products
Prep-n-Cote® 500 LT™ X X X X X X 90°F - 140°F
Spray Wand Products
Parco® Spray Wand 200™
X X X X X X X 130°F - 190°F
aLkaLIne CLeaner aCId CLeaner ConVerSIon CoaTIngCondITIoner PoST TreaTMenT
Pr
od
uC
tS
Su
rFA
Ce
Pr
eP,
C
leA
nIn
G &
Co
AtIn
G
For a comprehensive list of package sizes and product offerings, call us at: 1-800-521-1355
33
Manganese Phosphate Conversion CoatingsThese corrosion-resistant coatings consist chiefly of iron and manganese phosphates, and reduce wear on such articles as pistons, rings, liners, camshafts, tappets, motor blocks and similar bearing surfaces. Other beneficial effects are: permits rapid break-in of moving parts without scuffing or welding by preventing metal-to-metal contact between the bearing surfaces; increases lubrication of treated surfaces due to the oil-absorptive coating; and removes light metal scratches remaining from machining operations.
Parco® Lubrite® LT-10™ – An energy saving, low operating temperature manganese phosphate conversion coating formulated to produce a nonmetallic, corrosion resistant coating on iron and steel surfaces. Extremely effective for use where there is metal-to-metal contact.
Temperature
Products
Liqu
id
Pow
der
Spra
y
Imm
ersi
on
Stee
l
acce
lera
tion
Tem
pera
ture
ra
nge
Parco® Lubrite® LT-10™ X X X Internal 135°F - 155°F
Bonderite® ZM-1™ – This zinc phosphate conversion coating converts metallic substrate surfaces to a fine-crystalline, non-metallic zinc phosphate coating that inhibits corrosion, and increases the adhesion and durability of organic paints and finishes.
Bonderite® ZM-2™ – A lower concentrate version of Bonderite® ZM-1™, which requires less diluent when adding to process tanks.
Bonderite® 2010™ – This zinc phosphate is formulated for immersion application to steel, galvanized steel, electrogalvanized steel, zinc-alloy coated steel and aluminum. Provides high alkaline resistance and is preferred as a paint base, offering superior adhesion and durability.
Bonderite® 2101™ – Nickel-free zinc phosphate chemistry.
Substrate Contents Temperature
Products
Spra
y
Imm
ersi
on
Stee
l
Zinc
alum
inum
acce
lera
tion
Crys
tal T
ype
Man
gane
se
nick
el
Tem
pera
ture
ra
nge
Bonderite® ZM-1™ X X X X X Internal Micro X 120°F - 135°F
Bonderite® ZM-2™ X X X X X Internal Micro X 120°F - 135°F
Bonderite® 2010™ X X X X X Internal Micro X X 120°F - 135°F
Bonderite® 2101™ X X X X X Internal Micro X 120°F - 135°F
Zinc Phosphate Conversion CoatingsThe process converts the metal surface to a nonmetallic, polycrystalline coating containing iron, manganese, nickel and zinc phosphates. The metals may be treated individually or in mixed production.
aLkaLIne CLeaner aCId CLeaner ConVerSIon CoaTIngCondITIoner PoST TreaTMenT
Alodine®
Pr
od
uC
tS
Su
rFA
Ce
Pr
eP,
Cle
An
InG
& C
oAtIn
G
34
Surface Preparation, Cleaning & Conversion Coating
aLkaLIne CLeaner aCId CLeaner ConVerSIon CoaTIngCondITIoner PoST TreaTMenT
Pr
od
uC
tS
Su
rFA
Ce
Pr
eP,
C
leA
nIn
G &
Co
AtIn
G
Light Metals Conversion Coatings
Products
Liqu
id
Spra
y
Imm
ersi
on
Mag
nesi
um
Zinc
alum
inum
Inte
rnal
exte
rnal
reac
tive
dry
in P
lace
70°F
- 1
20°F
85°F
- 1
20°F
100°
F -
135°
F
Mili
tary
ap
prov
als
non-Chrome Technology
alodine® 5200™ X X X X X X X X X X X
alodine® 5700™ X X X X X X X X X X X
alodine® 2600™ X X X X X X X
alodine® 4595™ X X X X X X X
alodine® eC2™ X X X X X
Chrome Technology
alodine® 1600™ X X X X X X X X
alodine® 1500™ X X
alodine® 407™ X X X X X X X
alodine® T 5900™ X X X X X X X
non-Chrome Technology
alodine® 5200™ – A chromium-free titanium/polymer conversion coating for non-ferrous alloys for bonding and organic finishes.
alodine® 5700™ – A ready-to-use version of Alodine® 5200™, also available in convenient wipes.
alodine® 2600™ – A cobalt-based conversion coating for aluminum.
alodine® 4595™ – A chromium-free zirconium/polymer product for treating aluminum to provide an excellent base for organic finishes and bonding.
alodine® eC2™ – An electro-ceramic coating that is chromium-free and formulated for coating aluminum, titanium and their alloys, and can function as the final finish to provide extreme corrosion protection.
Chrome Technology
alodine® 1600™ – A liquid MIL-DTL-81706/MIL-DTL-5541F approved chromate to Class 1A and 3 to produce a protective coating on aluminum.
alodine® 1500™ – A liquid MIL-DTL-81706/MIL-DTL-5541F approved chromate to Class 3 to produce a protective coating on aluminum.
alodine® 407™ – A chrome phosphate conversion coating for architectural applications.
alodine® T 5900™ – A trivalent chrome conversion coating approved to MIL-DTL-81706/MIL-DTL-5541F Class 1A and 3.
NEW!
For a comprehensive list of package sizes and product offerings, call us at: 1-800-521-1355
35
Alodine®
aLkaLIne CLeaner aCId CLeaner ConVerSIon CoaTIngCondITIoner PoST TreaTMenT
Post-Treatment
Parcolene® 99x™ – A patented, chromium and phosphate-free post treatment that increases paint adhesion and corrosion resistance of metal surfaces for use over all types of conversion coatings used in the pretreatment of steel, zinc, and aluminum surfaces.
Substrate Paint System
Products
Liqu
id
reac
tive
Spra
y
Imm
ersi
on
Stee
l
galv
aniz
ed
alum
inum
non-
Chro
me
orga
nic
ambi
ent
dIW
rin
se/
afte
r
Wet
Pow
der
e-Co
at
Parcolene® 99x™ X X X X X X X X X X X X X XX
Pr
od
uC
tS
Su
rFA
Ce
Pr
eP,
Cle
An
InG
& C
oAtIn
G
For a comprehensive list of package sizes and product offerings, call us at: 1-800-521-1355
36
autodeposition Coatings
Henkel’s patented Aquence® autodeposition process chemistries deliver extreme corrosion protection while increasing process efficiency over traditional finishing methods. The Aquence® process coats complex parts evenly and can stand alone as the finished surface or accept topcoat paint for aesthetics. The Aquence® process combines metal pretreatment, coating and finishing, and provides a lasting finish both inside of parts and out.
By streamlining the metal finishing process, the Aquence® process reduces in-plant space requirements, energy consumption and processing steps, while increasing corrosion resistance and life expectancy of critical components. We offer our customers a full pilot line capable of running prototype trials to demonstrate the benefits of the Aquence® process.
Cleaners
ProductsLi
quid
Pow
der
alka
line
acid
Spra
y
Imm
ersi
on
Stee
l
galv
aniz
ed/Z
inc
Ligh
t dut
y
Med
ium
dut
y
Wel
dmen
ts/S
cale
rem
oves
Fla
sh
rust
draw
ing
Com
poun
ds
Tem
pera
ture
ra
nge
emul
sify
Split
-out
Phos
phat
es
aquence® Cleaner 1772™
X X X X X O X O 140°F - 190°F
X X
aquence® 2592™
X X O X X X O X180°F - 200°F
X
aquence® 2599™
X X X O X X O120°F - 160°F
X
aquence® 2600™
X X X O X O X150°F - 180°F
X
aquence® 2810™
X X O X X X O120°F - 160°F
X trace
aquence® Cleaner 2819™
X X X X X X X O O140°F - 180°F
X X
aquence® 2860™
X X X O X X O X150°F - 200°F
X X
aquence® 182a™
X X X X X X O X80°F - 180°F
X X
aquence® 7005™
X X X X O X X120°F - 190°F
X X
aquence® 7150™
X X X O X X X O X135°F - 165°F
X trace
aquence® 7310™
X X X O X X O O X145°F - 175°F
X
aquence® 7320™
X X X O X O X O X145°F - 175°F
X
Pr
od
uC
tS
Au
to
de
Po
SIt
Ion
C
oA
tIn
GS
X = Primary AttributeO = Secondary Attribute
For more information, please visit:
www.autophoretic.com
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
37
alkaline Cleaners
aquence® Cleaner 1772™ – A powdered, non-silicated, strongly alkaline cleaner formulated for use in spray process equipment for heavy duty cleaning of ferrous metals prior to autodeposition.
aquence® 2592™ – A liquid, alkaline cleaner formulated for heavy duty, general purpose cleaning of ferrous metals and is used to remove soils, oils, and forming lubricants from steel prior to the application of autodeposited coatings.
aquence® 2599™ – An alkaline cleaner designed to prepare steel surfaces to receive an Aquence® coating.
aquence® 2600™ – A liquid, phosphate and silicate free, strong alkaline cleaner formulated for heavy duty cleaning of ferrous metal surfaces prior to autodeposition.
aquence® 2810™ – A non-silicated, liquid, alkaline cleaner formulated for heavy duty, general purpose cleaning of ferrous metals used to remove a variety of soils, oils and forming lubricants from steel prior to the application of autodeposited coatings.
aquence® Cleaner 2819™ – Prepares steel, electrogalvanized and hot-dip galvanized surfaces to receive an Aquence® coating. This strongly alkaline treatment can be applied by spray or immersion.
aquence® 2860™ – A liquid, non-silicated, strongly alkaline cleaner formulated for use in immersion process equipment for heavy duty cleaning and oxide removal from ferrous metal surfaces prior to autodeposition.
acid Cleaners
aquence® 182a™ – This phosphoric acid-based, detergent-type metal cleaner and rust remover with biodegradable organic surfactants destroys corrosion stimulators and can be used in spray or immersion systems to remove rust and light deposits of mill oil on steel parts.
aquence® 7005™ – An acidic composition, which when diluted with water, produces a mixed mineral acid-solvent-detergent liquid metal cleaner and rust remover. It will effectively remove rust, scale, and light deposits of mill oil from the surface of metals and properly condition steel surfaces.
aquence® 7150™ – An acidic composition, for use in spray washing systems prior to Aquence® paint films and for removing light rust and oxidation from iron and steel surfaces. For effective derusting, articles must be free from grease and oil before cleaning.
aquence® 7310™ – An acidic composition, spray cleaning solution for removing light rust and oxidation from iron and steel surfaces prior to the application of an Aquence® paint film.
aquence® 7320™ – An acidic composition, which when diluted with water, produces a spray/dip cleaning solution for removing light rust, oxidation and oily soils from iron and steel surfaces prior to the application of Aquence® Coating Chemicals. The performance of the coated part is improved when cleaning is followed by ultrasonic-assisted rinsing.
CLeaner CoaTIng reaCTIon rInSe
Pr
od
uC
tS
Au
to
de
Po
SIt
Ion
C
oA
tIn
GS
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
38
autodeposition Coatings
Products
resi
n Ba
se
High
ope
ratin
g Te
mpe
ratu
re
resi
stan
ce
glos
s ra
nge
Flex
ibili
ty
Salt
Spra
y re
sist
ance
Cycl
ic C
orro
sion
VoC
Impa
ct r
esis
tanc
e (in
./lb
s.)
Penc
il Ha
rdne
ss
Proc
ess
effic
ienc
y
Flas
h-of
f ove
n
Cure
Tem
pera
ture
ra
nge
Pain
t Sol
ids
(%
wei
ght)
aquence® 866™ PVDC 5 - 10 X X X None 120 - 160 4H - 7HMedium -
HighNo
200°F - 220°F
38%
aquence® 866Ix™
PVDC 5 - 10 X X X None 120 - 160 4H - 7H Very High No200°F - 220°F
38%
aquence® 915™Epoxy / Acrylic
UrethaneX 40 - 80 X X X
Very Low
60 - 80 H - 3HMedium -
HighYes
350°F - 385°F
33%
aquence® 915Ix™
Epoxy / Acrylic Urethane
X 40 - 80 X X XVery Low
60 - 80 H - 3H Very High Yes350°F - 385°F
33%
aquence® 925g™
Epoxy / Acrylic Urethane
X 40 - 80 X X XVery Low
60 - 80 H - 3HMedium -
HighYes
325°F - 365°F
33%
aquence® 930™
Epoxy / Acrylic Urethane
X 30 - 80 X X XVery Low
60 - 100 H - 3HMedium -
HighYes
350°F - 385°F
33%
Coatings
aquence® 866™ – A smooth, black, water-based, organic coating for ferrous metal surfaces. When deposited uniformly on the metal surface, it will coat recessed or partially enclosed surfaces to provide low cure solvent and heavy metal-free coatings with good corrosion resistance, solvent resistance, adhesion, flexibility and hardness.
aquence® 866Ix™ – A high efficiency replenisher used to produce a smooth, black, water-based, organic coating on ferrous metal surfaces. When deposited uniformly on the metal surface, it will coat recessed or partially enclosed surfaces to provide low cure coating with good corrosion resistance, solvent resistance, adhesion, flexibility and hardness free of solvents or heavy metals.
aquence® 915™ – A concentrated liquid chemical used to produce a black, water-based, organic coating on ferrous metal surfaces. When deposited uniformly on the metal surface, it will coat recessed or partially enclosed surfaces.
aquence® 915Ix™ – A high efficiency, concentrated, water-based, liquid chemical used to produce a black organic coating on ferrous metal surfaces. When deposited uniformly on the metal surface, it will coat recessed or partially enclosed surfaces.
aquence® 925g™ – Coating chemicals consist of two components of concentrated, liquid chemicals used to produce a grey, organic, water-based coating on ferrous metal surfaces. When deposited uniformly on the metal surface, it will coat recessed or partially enclosed surfaces. Design of this coating is for a lighter, non-black primer for accepting color specific topcoats.
aquence® 930™ – This epoxy-acrylic urethane coating is environmentally responsible, heavy metal-free, with low VOC that delivers enhanced corrosion performance for demanding applications like frames and chassis components.
CLeaner CoaTIng reaCTIon rInSe
Pr
od
uC
tS
Au
to
de
Po
SIt
Ion
C
oA
tIn
GS
X = Primary AttributeO = Secondary Attribute
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
NEW!
NEW!
39
reaction rinses
Products
Coat
ing
Serie
s
Mul
ti-Co
mpo
nent
neut
ral
alka
line
acid
CrS
HrS
Forg
ings
Cast
ings
Phos
phon
ate
Zirc
oniu
m
Calc
ium
/Pho
spha
te
Salt
Spra
y re
sist
ance
Cycl
ic C
orro
sion
re
sist
ance
Chem
ical
Flu
id
resi
stan
ce
Solv
ent r
esis
tanc
e
Bend
ing/
Form
ing
glos
s
Surf
ace
Smoo
thne
ss
Conc
entr
atio
n
Proc
ess
Tank
Te
mpe
ratu
re
aquence® 2150™
800 X X X O O X O X O X Low Low 1% - 3% RT
aquence® 3416™
800 X X X X X X X O O O X Medium High 1% - 10% RT
aquence® e2™ 900 X X X X X X X O X X X Medium Medium 1% - 4%125°F - 140°F
aquence® e3™ 900 X X X X X X X X X O O X High Medium0.36% E3A3.6% E3B1% E3C
125°F
aquence® 2150™ – A liquid chemical used to improve the water resistance, corrosion resistance and adhesion properties of cured Aquence® 800 series coatings.
aquence® 3416™ – An alkaline liquid chemical used as an immersion reaction rinse for surfaces treated with Aquence® coating chemicals to improve the uniformity and gloss of coating appearance.
aquence® e2™ – A liquid chemical used to improve the water and corrosion resistance along with improved adhesion properties of cured Aquence® 900 series coatings.
aquence® e3™ – A liquid chemical used to improve the corrosion resistance, coverage and appearance of cured Aquence® ACC® 900 series coatings.
CLeaner CoaTIng reaCTIon rInSe
Pr
od
uC
tS
Au
to
de
Po
SIt
Ion
C
oA
tIn
GS
For more information, please visit:
www.autophoretic.com
X = Primary AttributeO = Secondary Attribute
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
40
Pr
od
uC
tS
CH
eM
ICA
l S
Pe
CIA
ltIe
S
Chemical Specialties
Our extensive line of chemical specialty products ranges from plastic cleaners to paint strippers that are designed to treat, clean and maintain working areas, equipment and assembly surfaces. Our chemists have developed technologies that make your working environment safer, cleaner and more productive. We are leading green initiatives to lower carbon footprint, reduce VOCs, eliminate solvents and develop HAPS-free chemistries. Whether you need floor cleaner or paint line purge solutions, our chemical specialties product line has you covered.
application/System Temperature Contents
Products
Spra
y
Conc
entr
atio
n (%
by
volu
me)
Mild
Ste
el
etch
oper
atin
g Te
mpe
ratu
re
Liqu
id
Phos
phat
e-Fr
ee
Solu
tion
Mod
ifier
Surf
ace
Mod
ifier
Phos
phor
ic
acid
Citr
ic a
cid
Cleaners
P3® Polyprep® 110™ Cleaner X 2%-5% X 110°F-160°F X X X
P3® Polyprep® 3293™ Cleaner X 2%-5% X 130°F-150°F X X
P3® Polyprep® 2615™ Cleaner X 2%-5% X 130°F-150°F X X X
rinse aids
P3® Polyprep® rinse 400™ X 0.03%-0.07% 70°F-110°F X X X
P3® Polyprep® rinse 205™ X 0.15%-0.35% 70°F-110°F X X X
P3® Polyprep® 110™ Cleaner – A low temperature, phosphate-free plastics cleaner designed for plastics pretreatment process prior to paint. Minimizes utility costs such as energy and water consumption.
P3® Polyprep® 3293™ Cleaner – Phosphate containing (acid) – An acidic cleaner formulated primarily for cleaning plastic surfaces.
P3® Polyprep® 2615™ Cleaner – Phosphate-free (acid) – An acidic cleaner formulated primarily for phosphate-free cleaning of plastic surfaces.
P3® Polyprep® rinse 400™ – Designed for use after plastic cleaning in plastic pretreatment operations and assists in the displacement and removal of solids-laden water, thereby minimizing water spotting on cleaned plastic and painted plastic parts.
P3® Polyprep® rinse 205™ – Specially designed for use on Thermal Plastic Olefin (TPO) after plastic cleaning in plastic pretreatment operations, and assists in the displacement and removal of solids-laden water, thereby minimizing water spotting on cleaned plastic and painted plastic parts.
application/System Temperature Characteristics
Products
Pres
sure
Pot
Wip
e
Solv
ent-
born
e Pa
int
Wat
erbo
rne
Pain
t
gene
ral S
oil
Clea
nup
oper
atin
g Te
mpe
ratu
re
Wat
er
redu
cabl
e
VoC
(H,M
,L)
Purge Solvent
P3® Parcosol® 577WB™ X X X X ambient-130°F X L
Line Cleaner
P3® 200WB™ Paint Line Cleaner X X X ambient-130°F X L
P3® Parcosol® 577WB™ – This HAPs-free, low-VOC, water-soluble proprietary activator/amine purge blend, used for internal and external cleaning of waterborne paint application equipment, is the next generation of Parcosol® 277WB™. Very effective at removing wet, semi-dry and dry waterborne paint from bell or air-atomized paint delivery equipment.
P3® 200WB™ Paint Line Cleaner – Used for cleaning internally the re-circulating paint lines for waterborne and solvent-borne paint systems and specially developed to be compatible with all types of Viton seals.
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
Plastic Cleaners and rinses
Purge and Line Cleaners
NEW!
41
Pr
od
uC
tS
CH
eM
ICA
l S
Pe
CIA
ltIe
S
application/System Temperature Characteristics
Products
Spra
y
roll
or B
rush
dry
Tim
e
Wet
Mil
appl
ied
oper
atin
g Te
mpe
ratu
re
grey
Whi
te
Clea
r
Wat
er
rem
ovab
le
Visc
osity
(H
, M, L
)
VoC
(H, M
, L)
Maskings
P3® 2474™ Peelable Masking X X 1 hour 5.5-6.0 ambient X M L
P3® 2486™ Peelable Masking X X 1 hour 5.5-6.0 ambient X M L
P3® 2498™ Peelable Masking X X 1 hour 6.0-8 ambient X M L
P3® Clear Masking 2484™ X X NA as needed ambient X X H L
Baffle Coating
P3® Baffle Coating 2451™ X X NA 8-10 ambient X X H L
Cold Strippers
P3® 110™ Cold Stripper X X NA as required to remove paint X X H H
P3® 200WB™ Stripper X X NA as required to remove paint X X H L
P3® 2474™, 2486™ and 2498™ Peelable Masking – Water-based and solvent-based peelable protective coatings used for temporary protection of parts, spray booths and equipment.
P3® Clear Masking 2484™ – This water-based transparent masking forms a tacky, clear coating designed to maximize the trapping of dust, dirt and other airborne debris, while not altering the appearance of the original substrate.
P3® Baffle Coating 2451™ – This water-resistant, grease-type product is formulated for application to baffles, back sections, stacks, underbooth areas and other locations where a greasy coating is desired to prevent adhesion of paint overspray.
P3® 110™ Cold Stripper – This solvent-based, thickened paint stripper for removing uncured paint from the walls, windows, grates, and floors of spray booths and paint rooms is also effective in the removal of heavy paint build-up.
P3® 200WB™ Stripper – A water-based thickened paint stripper for removing uncured paint from walls, windows, grates, and floors of spray booths and paint rooms. Effective in the removal of heavy paint build-up.
application/System Temperature Characteristics
Products
Scru
bber
Mop
/Pai
l
Wip
e
Solv
ent-
Born
e Pa
int
Wat
erbo
rne
Pain
t
e-Co
at
Syst
em
gene
ral S
oil
Clea
nup
oper
atin
g Te
mpe
ratu
re
Wat
er
redu
ceab
le
VoC
(H, M
, L)
Floor or General Purpose Cleaner
P3® 116™ Saf-T-Clean X X X X X X ambient-130°F X L
P3® 104™ Saf-T-Clean X X X X ambient H
P3® Parco® 2280™ Cleanup X X X X ambient X L
P3® 222™ rik X X X X ambient X L
P3® 2226™ Maintenance Cleaner X X X X ambient-130°F X L
P3® Parcosol® 283™ Wipes X X ambient H
System Cleaners
P3® 2250uF™ e-Coat Cleaner X <150°F X L
P3® 2255™ e-Coat Cleaner X <150°F X L
P3® 2227a™ oven Cleaner X ambient M
P3® 116™ Saf-T-Clean – This low-foaming, low-VOC, paint remover for uncured paint does not contain chlorinated solvent or naphthalene.
P3® 104™ Saf-T-Clean – A low-odor blended solvent for removal of paints and other soils from the floor in the spray booth area of an automotive assembly plant.
P3® Parco® 2280™ Cleanup – This blue liquid with a mild pleasant aroma is formulated to meet the properties required by automotive and other industrial general maintenance cleaning needs.
P3® 222™ rik – This industrial floor cleaner is a slightly alkaline liquid product formulated for the cleaning of dirty floors and used, after dilution with water, with machine floor scrubbers or mop and bucket.
P3® 2226™ Maintenance Cleaner – This liquid cleaner removes soils from floors, walls, windows, machinery and other hard surfaces. Designed to leave no visible residue if a water rinse does not follow the cleaning operation.
P3® Parcosol® 283™ Wipes – Solvent impregnated wipes for light to medium cleaning.
P3® 2250uF™ e-Coat Cleaner – A low-VOC, HAPS-free, water-based concentrated cleaner used in ultra filtration or spray wash systems to remove E-Coat buildup and formulated to minimize foaming while removing uncured cathodic E-Coat buildup.
P3® 2255™ e-Coat Cleaner – A low-VOC, low-foaming, water-based concentrated cleaner for use in a spray-recirculation system and formulated to minimize foaming while effectively removing uncured cathodic E-Coat buildup.
P3® 2227a™ oven Cleaner – Especially formulated for removal of E-Coat, primer and topcoat resins, plasticizers and other charred, hard-crusted soils found in the ovens of automotive and general industrial plants.
• AdditionAl product offerings Are AvAilAble, see product list on pAges 78-79 for descriptions.
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
Paint Booth Products
Specialized Cleaners
NEW!
42
Metalworking Fluids
Metal removal Henkel’s line of high-quality metal removal products for cutting and grinding are available in a variety of chemistries including synthetics, semi-synthetics, soluble oils or straight oils.
Synthetic
Multan® 9103™ – An oil-rejecting synthetic metal removal fluid that has multiple uses in today’s manufacturing environment. For use on ferrous alloys only.
Multan® 3105™ – An oil-rejecting, synthetic fluid designed for machining, grinding and roll-forming ferrous and non-ferrous alloys. It is also suitable for use on brass, copper and other exotic metals.
Semi-Synthetic
Multan® B-204™ – A semi-synthetic metal removal lubricant with a combination of lubricity additives and cooling ability for light to moderate applications and is bio-resistant for applications where lubricity, cooling and finish are critical.
Multan® B-236™ – A low foam, water soluble semi-synthetic fluid designed for machining and grinding ferrous and aluminum alloys. It is designed for use in areas where soft water or process requirements make foam difficult to control. Ideal for applications where RO/DI water is used.
Multan® B-400™ – This semi-synthetic, bio-resistant product can be used in industrial metal removal applications and is suitable for use on brass, copper and other exotic metals. Typical applications are machining and grinding of ferrous and aluminum alloys.
Multan® B-414™ – A low foam, water soluble, semi-synthetic fluid designed for machining and grinding ferrous and non-ferrous alloys. It is designed for use in areas where soft water or process requirements make foam difficult to control. Its wide applicability makes it suitable for use on brass, copper and other exotic metals. It is also suitable on harder to machine alloys such as stainless steel, titanium or inconel.
Soluble oil
Multan® 5600d™ – This all-purpose soluble oil, designed for machining and grinding ferrous and aluminum alloys provides excellent lubricity for various types of difficult operations.
Straight oil
Multan® Cr 10™ – This moderate viscosity straight oil with an additive package is useful in general machining applications such as hobbing, milling or shaping, ranging from steel gear machining to cutting tool manufacturing.
Multan® Cr 26™ – This unique composition of corrosion inhibitors, Extreme Pressure (EP) additives, anti-mist agents and lubricity additives provides a durable straight oil product for today’s moderate broaching operation.
• AdditionAl product offerings Are AvAilAble, see product list on pAges 78-79 for descriptions.
Henkel offers a full line of metalworking fluids designed to extend tool life, reduce wastes, improve quality and increase throughput. From straight oils to synthetics, our products for metal forming, metal removal and rust prevention contain necessary additives that meet the needs of light to heavy duty industry applications.
Pr
od
uC
tS
Me
tAlw
or
kIn
G
Flu
IdS
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
43
eP addITIVeS SuBSTraTe CoMPaTIBILITY
Products
orde
r IT
eM
nuM
Ber
ConT
aIne
r W
eIgH
T (k
g)
ConT
aIne
r SI
Ze
ConC
enTr
aTe
CoLo
r
ruST
-Fre
e Co
nC.
(%) -
CaS
T Ir
on
VIS
CoSI
TY -
H2o
So
LuBL
eS (c
P), o
ILS
(SuS
@ 1
00°F
)
oIL
ConT
enT
ra
nge
(%)
TYPI
CaL
Co
nCen
TraT
Ion
PHoS
PHor
uS
SuLF
ur
STee
L
CaST
Iron
aLuM
InuM
**
YeLL
oW (C
oPPe
r /
BraS
S)**
SYnTHeTIC
Multan® 9103™
596262 20 PAIL
Blue 3 35 0 5%-10% A b A b593832 213 DRUM
952802 1258 330 GAL. TOTE
Multan® 3105™
599088 18 PAIL
Pale Amber 4 70 0 5%-10% a b a b A B c A B c598807 211 DRUM
596467 1041 275 GAL. TOTE
SeMI-SYnTHeTIC
Multan® B-204™
1052097 18 PAIL
Amber 2 200 20-25 5%-10% X A B c A B c A b A b 1052551 202 DRUM
1052099 1198 330 GAL. TOTE
Multan® B-236™ 1052099 18 PAIL
Amber 2 200 20-25 5%-10% X A B c A B c A b A b1052099 202 DRUM
1052099 1198 330 GAL. TOTE
Multan® B-400™
706695 18 PAIL
Amber 2 275 25-30 5%-10% X X a B C b C a B C a B C677532 197 DRUM
802380 1180 330 GAL. TOTE
Multan® B-414™ 1183211 18 PAIL
Amber 2 275 25-30 5%-10% X X a B C b C a B C a B C1183199 197 DRUM
1183248 1180 330 GAL. TOTE
SoLuBLe oIL
Multan® 5600d™
598193 17 PAIL
Amber N/A 170 85-90 5%-10% a B C a B C b c b c594510 192 DRUM
665576 904 275 GAL. TOTE
STraIgHT oIL
Multan® Cr 10™
628510 16 PAIL
Amber N/A 120 90-95 100% X A B A B a b a b 593816 181 DRUM
820117 1078 330 GAL. TOTE
Multan® Cr 26™
910772 16 PAIL
Amber N/A 220 75-80 100% X X A B c A B c a b a b 910511 174 DRUM
910480 1040 330 GAL. TOTE
A – Highly Recommend for Grindinga – Recommend for GrindingB – Highly Recommend for General Machining – Turning, Drilling, Milling, Reaming, Sawing, Cuttingb – Recommend for Medium General Machining – Turning, Drilling, Milling, Reaming, Sawing, CuttingC – Highly Recommend for General Machining – Threading, Broaching, Deep Hole Drilling, Reamingc – Recommend for General Machining – Threading, Broaching, Deep Hole Drilling, Reaming
** Individual alloys should be tested prior to recommendation.
Pr
od
uC
tS
Me
tAlw
or
kIn
G
FluId
S
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
NEW!
NEW!
44
Metalworking Fluids
Metal Forming Synthetic
Multan® F 2004™ – A synthetic compound designed for deep drawing and stamping of ferrous and aluminum alloys. Its unique composition of corrosion inhibitors, Extreme Pressure (EP) additives and lubricity additives provide a durable product for today’s moderate to heavy drawing and stamping operations.
Multan® F 4510™ – A chlorinated synthetic stamping fluid designed for press forming of steel alloys. High EP level offers extreme lubrication in high speed, high heat operations.
Multan® F 4768™ – A chlorine-free synthetic stamping fluid designed for severe press forming of multi-metal alloys. It is non-staining in the presence of mixed metals.
Multan® F 6740™ – A synthetic based compound designed for forming, punching and machining ferrous to galvanized alloys. Multan® F 6740™ can also be used on various aluminum and stainless steel alloys.
Multan® F 7270™ – A synthetic compound designed for drawing and stamping of ferrous and aluminum alloys. Excellent performance in high speed progressive die applications.
Soluble oil
Multan® F 981nd™ – A versatile chlorinated soluble oil fluid capable of stamping, drawing, machining and grinding both ferrous and nonferrous alloys. It is not recommended for zinc-coated materials.
Multan® F 985™ – Another versatile soluble oil fluid designed for stamping, drawing, machining and grinding both ferrous and nonferrous alloys. This material is safe on zinc coated metals and performs well in stainless steel applications.
oil Base
Multan® PL 1439™ – A low VOC lubricant designed for light high-speed stamping. It was designed primarily for fin stamping, used in the heating, cooling and radiator industry where excellent hydrolytic stability and refrigerant compatibility is required. Multan® PL 1439™ provides superior performance with low coating weights when used in conjunction with Henkel’s Appli-Coater® lubricant delivery system.
Multan® PL 298™ – An oil based compound designed for tube hydroforming of ferrous and aluminum alloys. Its moderate viscosity allows for a wide range of additional uses in heavy metal forming operations.
Pr
od
uC
tS
Me
tAlw
or
kIn
G
Flu
IdS
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
• AdditionAl product offerings Are AvAilAble, see product list on pAges 78-79 for descriptions.
45
BoundarY eP addS SuBSTraTe
Products
orde
r IT
eM
nuM
Ber
ConT
aIne
r W
eIgH
T (k
g)
ConT
aIne
r SI
Ze
VISC
oSIT
Y (c
P)
TYPI
CaL
dILu
TIon
FaTT
Y aC
IdS
eSTe
rS
CHLo
rIne
PHoS
PHor
ouS
SuLF
ur
PLaI
n ST
eeL
gaLV
anIZ
ed /
ZInC
aL
LoY*
*
YeLL
oW M
eTaL
S**
STaI
nLeS
S ST
eeL
aLuM
InuM
**
SYnTHeTIC
Multan® F 2004™
772350 18 PAIL
1200 5%-100% X X B C B C635811 215 DRUM
598772 1061 275 GAL. TOTE
Multan® F 4510™ 1063135 20 PAIL
8000 5%-50% X X X b C b C b C1063134 215 DRUM
1063136 1277 330 GAL. TOTE
Multan® F 4768™ 1287618 18 PAIL
9000 5%-50% X X b C b C b C b C1287619 214 DRUM
1287654 1273 TOTE
Multan® F 6740™
877750 18 PAIL
200 5%-20% X X A B a b c A B A B877749 204 DRUM
877728 1219 330 GAL. TOTE
Multan® F 7270™ 915862 18 PAIL
850 20%-100% A B c a B c a b c915851 209 DRUM
915615 1242 330 GAL. TOTE
SoLuBLe oIL
Multan® F 981nd™
596028 18 PAIL
765 10%-100% X X X B C b c b c594617 211 DRUM
822357 1041 275 GAL. TOTE
Multan® F 985™
593248 18 PAIL
1420 10%-100% X X X B C b c B C b c594260 200 DRUM
593247 951 275 GAL. TOTE
oIL BaSe
Multan® PL 1439™
994017 16 PAIL
55 100% A b a b A b a A b994018 171 DRUM
997935 1018 330 GAL. TOTE
Multan® PL 298™
928486 15 PAIL
250 100% X X b C b C928485 181 DRUM
928483 1079 330 GAL. TOTE
A – Highly Recommend for Light Forming (Stamping, Punching, Piercing)a – Recommend for Light Forming (Stamping, Punching, Piercing)B – Highly Recommend for Medium Forming (Heavy Stamping, Bending, Roll Forming, Single Hit Die)b – Recommend for Medium Forming (Heavy Stamping, Bending, Roll Forming, Single Hit Die)C – Highly Recommend for Heavy Forming (Deep Drawing, Deep Bending, Tube Bending, Hydroforming, Extruding, Progressive Dies)c – Recommend for Heavy Forming (Deep Drawing, Deep Bending, Tube Bending, Hydroforming, Extruding, Progressive Dies)
** Individual alloys should be tested prior to recommendation.
Pr
od
uC
tS
Me
tAlw
or
kIn
G
FluId
S
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
NEW!
NEW!
NEW!
NEW!
46
Metalworking Fluids
Cleaners with rust PreventionThe unique composition of alkalinity, corrosion inhibitors and surfactants provides a durable low-foaming, hard water-stable product for today’s light to moderate duty cleaning and protecting needs.
Products
orde
r IT
eM
nuM
Ber
ConT
aIne
r
WeI
gHT
(kg)
ConT
aIne
r SI
Ze
CLea
ner
TYPe
oIL
SPLI
TTIn
g
aMBI
enT
To 1
20°F
120°
F To
160
°F
160°
F +
Bora
TeS
PHoS
PHaT
eS
SPra
Y
IMM
erSI
on
Ferr
ouS
aLuM
InuM
**
neuTraL
P3® neutracare® 5088™
597978 18 PAIL
Organic X X X X X X593241 209 DRUM
597779 1031 275 GAL. TOTE
P3® neutracare® 5175™
598323 18 PAIL
Organic X X X X X X X 594672 232 DRUM
595719 1134 275 GAL. TOTE
ParCo® CLeaner 220-WB™
772337 18 PAIL
Organic X X X X X X X X X598064 215 DRUM
729030 1052 275 GAL. TOTE
P3® neutracare® 5088™ – A neutral-based cleaner with corrosion inhibitors designed for short-term corrosion protection on ferrous alloys provides a durable, low-foaming product for moderate-duty corrosion protection.
P3® neutracare® 5175™ – A phosphated neutral cleaner with in-process corrosion prevention is designed to be used at a moderate temperature (120°F-160°F). For use on ferrous alloys only.
Parco® Cleaner 220-WB™ – A neutral cleaner used in metalworking applications to split tramp oils, maximize rust inhibition and foam control. Provides personnel safety with moderate cleaning ability. Suitable on multi-metal applications with a wide application bath temperature.
Pr
od
uC
tS
Me
tAlw
or
kIn
G
Flu
IdS
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
** Individual alloys should be tested prior to recommendation.
47
SyntheticP3® Prevox 501™ – A synthetic corrosion inhibitor designed for short-term corrosion protection on ferrous alloys. Its unique composition
provides a durable, low-foaming product for today’s moderate duty corrosion protecting needs.
P3® Prevox 505™ – A synthetic corrosion inhibitor designed for short-term corrosion protection on ferrous alloys. Its unique composition provides a durable, low-foaming product for today’s moderate duty corrosion protecting needs.
SolubleP3® Prevox 5800™ – A soluble oil corrosion inhibitor designed for long-term corrosion protection on ferrous and non-ferrous alloys. Its
unique composition provides a durable product for today’s corrosion protecting needs.
oil BaseMultan® PL 101™ – This highly versatile oil-based product with multiple OEM approvals is used for light forming and can also serve as a
ship out rust preventative.
P3® Prevox 4141™ – This rust inhibiting, solvent-based corrosion inhibitor is designed for extended corrosion protection on ferrous and non-ferrous alloys. Its high flash point (143°F) allows for a safer work environment without compromising rust protection.
aPPLICaTIon FILM MeTaLS
Products
orde
r IT
eM
nuM
Ber
ConT
aIne
r
WeI
gHT
(kg)
ConT
aIne
r SI
Ze
STor
age
% S
oLId
S
TYPI
CaL
dILu
TIon
TYPI
CaL
STor
age
TIM
e***
*
SPra
Y
dIP
Wax
TaCk
Y
oIL
FLuI
d
PLaS
TIC
/ Cr
YSTa
LLIn
e
STee
L
CaST
Iron
non-
Ferr
ouS*
*
SYnTHeTIC
P3® Prevox 501™
595486 18 PAIL
In-Process 45 3%-20% 2 wk X X X X X X 594014 236 DRUM
772748 1159 275 GAL. TOTE
P3® Prevox 505™
596698 18 PAIL
Short-Term 49 3%-20% 4 wk X X X X X 594827 213 DRUM
596594 1051 275 GAL. TOTE
SoLuBLe
P3® Prevox 5800™
772736 16 PAIL
Extended 99 3%-20% 3 mo X X X X X X772735 184 DRUM
761271 908 275 GAL. TOTE
oIL BaSe
Multan® PL 101™
594059 16 PAIL
Extended 100 100% 6 mo X X X X X X594526 179 DRUM
783463 1085 330 GAL. TOTE
P3® Prevox 4141™
879525 14 PAIL
Extended 10 100% 6 mo X X X X X X879524 161 DRUM
879523 933 330 GAL. TOTE
Pr
od
uC
tS
Me
tAlw
or
kIn
G
FluId
S
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
** Individual alloys should be tested prior to recommendation
Corrosion Preventatives
48
Hot Melt adhesive Bonding
Henkel’s robust hot melt adhesive technologies are suitable for bonding almost any substrate, from delicate papers to complex plastics. Our products range from polyolefins, EVAs and PSAs to one-component polyamides and reactive urethanes. They are available in a variety of package types such as tack-free pellets or pressure sensitive sheets. Henkel hot melts are easy to apply using the appropriate application equipment, from hand rollers to robotic spray guns.
Products order Item number
Package Type
adhesive Type Viscosity, cps Softening Point
HoT MeLT adHeSIVeS – PoLYaMIdeS
Macromelt® 6072™ 1206256 40 lb. Box Hot Melt Polyamide 750 @ 320°F 185°F (85°C)
Macromelt® 6208S™ 539394 Sack Hot Melt Polyamide 3,200 @ 410°F 310°F (155°C)
Macromelt® 6211™ 441523 Sack Hot Melt Polyamide 2,500 @ 410°F 293°F (145°C)
Macromelt® 6239™ 515023 Sack Hot Melt Polyamide 7,000 @ 437°F 280°F (138°C)
Macromelt® 9069™ 653794 Sack Hot Melt Polyamide 3,700 @ 410°F 374°F (190°C)
Macromelt® 2384™ 945507 Sack Hot Melt Polyamide 10,000 @ 437°F 374°F (190°C)
Macromelt® TPx 16-192B™
685358 Sack Hot Melt Polyamide 4,200 @ 410°F 342°F (172°C)
Macromelt® TPx 16-333B™ 733263 Sack Hot Melt Polyamide 3,000 @ 374°F 293°F (145°C)
Hyperm™ 34-3412™ 1217513 50 lb. Box Hot Melt Polyamide 4,500 @ 375°F 284°F (140°C)
HoT MeLT adHeSIVeS – PoLYoLeFIn
Technomelt® 80-8795™ 1151943 Box Hot Melt Polyolefin 7,000 @ 350°F 320°F (160°C)
Technomelt® 80-8707™ 1151479 Box Hot Melt Polyolefin 2,900 @ 350°F 290°F (143°C)
Technomelt® 80-8797™ 1151482 Box Hot Melt Polyolefin 2,300 @ 375°F 310°F (155°C)
Technomelt® 84-8843™884120 Drum
Hot Melt Polyolefin 5,500 @ 350°F 290°F (143°C)787390 Box
Filter-Lok® 34-159B™ 1217310 50 lb. Bags Hot Melt Polyolefin 11,700 @ 350°F 244°F (118°C)
Pr
od
uC
tS
Ho
t M
elt
A
dH
eS
IVe
Bo
nd
InG
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
NEW!
NEW!
Listed on and complies with the Canadian Domestic Substances List
49
PolyamidesMacromelt® 6072™ – A polyamide hot melt adhesive with a low softening point, application temperature and
viscosity. Good oil resistance. Suitable for bonding fabrics, wood, porous substrates and heat sensitive materials.
Macromelt® 6208S™ – A polyamide hot melt for use in potting and encapsulation applications with good adhesion to metals and plastics.
Macromelt® 6211™ – A moderate to long open time polyamide hot melt with excellent low temperature flexibility and good adhesion to plastics. Flammability rating of UL 94 V-0.
Macromelt® 6239™ – A versatile polyamide hot melt with good creep resistance at elevated temperatures and strong bond strength at low temperatures.
Macromelt® 9069™ – A high melting point, polyamide hot melt with good oil and chemical resistance that is an excellent adhesive for many filter applications.
Macromelt® 2384™ – A high melting point polyamide hot melt with superior oil and chemical resistance that is designed for use in fuel and hydraulic filter applications.
Macromelt® TPx 16-192B™ – A high melting point polyamide hot melt with good chemical and moisture resistance. A standard adhesive for many transportation filter applications.
Macromelt® TPx 16-333B™ – A moderate to long open time polyamide hot melt with good low temperature flexibility and an excellent product for wood cabinet assembly.
Hyperm™ 34-3412™ – A high temperature resistant, polyolefin-based hot melt adhesive with moderate open time.
PolyolefinTechnomelt® 80-8795™ – A high performance, general purpose olefin hot melt with a good balance of extreme
temperature resistance.
Technomelt® 80-8707™ – A long open time olefin hot melt with moderate set speed that is designed for bonding foam-to-foam, corrugated containers, particle board and wood, and has a good balance of heat and low temperature resistance.
Technomelt® 80-8797™ – A light-colored medium viscosity polyolefin hot melt adhesive. All ingredients are approved under the Federal Regulation 21 CFR 175.105 for incidental food contact.
Technomelt® 84-8843™ – An olefin hot melt designed to bond difficult substrates such as polyolefins, ABS, wood and some metals, and has excellent cohesive strength after providing a long open time.
Filter-Lok® 34-159B™ – A polyolefin based hot melt adhesive with moderate open time; used for pleating of air filters.
Pr
od
uC
tS
Ho
t M
elt
A
dH
eS
IVe
Bo
nd
InG
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
50
Pr
od
uC
tS
Ho
t M
elt
A
dH
eS
IVe
Bo
nd
InG
Hot Melt adhesive Bonding
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
Products order Item number Package Type adhesive Type Viscosity, cps Softening Point
HoT MeLT adHeSIVeS – eTHYLene VInYL aCeTaTe
Technomelt® 80-8309™670065 Unitainer
Hot Melt EVA 3,000 @ 350°F 170°F (77°C)514350 Box
Technomelt® 80-8368™1089736 Supersack
Hot Melt EVA 1,000 @ 350°F 230°F (110°C)514390 Box
Technomelt® 80-8448™693121 Unitainer
Hot Melt EVA 1,100 @ 350°F 230°F (110°C)514430 Box
Technomelt® 80-8633™ 514499 Box Hot Melt EVA 1,800 @ 350°F 223°F (106°C)
Technomelt® 80-8804™ 552789 Box Hot Melt EVA 1,150 @ 275°F 175°F (79°C)
Technomelt® 80-8884™ 987771 40 lb. Box Hot Melt EVA 1,700 @ 350°F 172°F (78°C)
Instant-Lok® 34-2635™1222924 50 lb. Box
Hot Melt EVA 1,150 350°F (177°C)1217399 1,200 lb. Versibox
ultra-Melt® 34-772C™1217803 30 lb. Box
Hot Melt EVA 970 350°F (177°C)1217814 1,000 lb. Binbox
Instant-Lok® 34-2631™1217409 50 lb. Box
Hot Melt EVA 1,250 350°F (177°C)1217375 1,200 lb. Versibox
Filter-Lok® 34-780C™ 1217805 1,200 lb. Binbox Hot Melt EVA 3,500 350°F (177°C)
kan-Tak® 34-4955™ 1222979 25 lb. Boxes Hot Melt EVA 1,500 350°F (177°C)
Filter-Lok® 34-947C™ 1217927 40 lb. Boxes Hot Melt EVA 4,500 350°F (177°C)
uni-Flex™ 34-1214™ 1217278 50 lb. Box Hot Melt EVA 2,200 350°F (177°C)
Filter-Lok® 34-870C™1217669 50 lb. Box
Hot Melt EVA 1,050 350°F (177°C)1217872 1,000 lb. Binbox
Filter-Lok® 34-771C™ 1217800 1,200 lb. Binbox Hot Melt EVA 1,700 350°F (177°C)
Filter-Lok® 34-967C™ 1217938 50 lb. Box Hot Melt EVA 3,500 350°F (177°C)
Filter-Lok® 34-412B™ 1217552 50 lb. Box Hot Melt EVA 6,500 350°F (177°C)
Instant-Lok® 34-2787™ 1217457 50 lb. Box Hot Melt Co-Polymer:
EVA / Rubber3,800 350°F (177°C)
Instant-Lok® 34-342B™ 1222961 50 lb. Box Hot Melt Co-Polymer:
EVA / Rubber3,250 350°F (177°C)
HoT MeLT adHeSIVeS – PreSSure SenSITIVe
Technomelt® 80-8697™514534 Box
Hot Melt PSA 17,500 @ 325°F 245°F (118°C)621750 Box
Technomelt® 86-8845™884580 Drum
Hot Melt PSA 18,000 @ 350°F 220°F (104°C)865526 Box
Technomelt® 86-8848™1059364 Drum
Hot Melt PSA 725 @ 300°F 200°F (93°C) 1124599 Box
Technomelt® Q 80-8668™ 1151472 Box Hot Melt PSA 36,000 @ 350°F 284°F (140°C)
Macromelt® Q 5613™ 1153925 Box Hot Melt PSA 1,200 @ 350°F 176°F (80°C)
Technomelt® eM-357uS™ 568396 Box Hot Melt PSA 850 @ 300°F 162°F (72°C)
Technomelt® eM-377uS™ 644304 Box Hot Melt PSA 6,500 @ 325°F 192°F (89°C)
Sanicare® 86-7110™ 884105 Drum
Hot Melt PSA 2,800 @ 300°F 170°F (77°C) 1009402 Box
Versa-Weld™ 34-491C™ 1217608 25 lb. box Hot Melt Polyolefin 800 @ 350°F 270°F (132°C)
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
Listed on and complies with the Canadian Domestic Substances List
51
Pr
od
uC
tS
Ho
t M
elt
A
dH
eS
IVe
Bo
nd
InG
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
ethylene Vinyl acetateTechnomelt® 80-8309™ – A flexible hot melt for applications such as furnace air filters that has non-blocking characteristics, excellent hot tack, heat
stability and can be heat reactivated.
Technomelt® 80-8368™ – A medium viscosity hot melt for applications requiring a broad adhesion window with good hot tack, fast set speed and medium to short open time.
Technomelt® 80-8448™ – A temperature robust, medium viscosity, general purpose hot melt formulated for applications such as filter assembly and case and carton sealing that has excellent hot tack and fast setting speed.
Technomelt® 80-8633™ – A general purpose, medium viscosity hot melt adhesive for filter assembly and packaging applications. Good hot tack range for longer open time needs with fast set speeds.
Technomelt® 80-8804™ – A low application temperature hot melt with high thermal stability and good low temperature properties.
Technomelt® 80-8884™ – A medium viscosity EVA-based hot melt adhesive with a long open time. Ideal for bonding paper framing material for filters. All ingredients approved for incidental food contact under Federal Regulation 21 CFR 175.105.
Instant-Lok® 34-2635™ – An EVA-based hot melt adhesive with short open time, specially formulated for bonding paper framing material for HVAC filters.
ultra-Melt® 34-772C™ – An EVA-based hot melt adhesive with fast open time, specially formulated for bonding paper framing material for HVAC filters.
Instant-Lok® 34-2631™ – An EVA-based hot melt adhesive with moderate open time, specially formulated for bonding paper framing material for HVAC filters.
Filter-Lok® 34-780C™ – A medium viscosity, reactivatable EVA-based hot melt adhesive with fast open time for use in the assembly of filters.
kan-Tak™ 34-4955™ – An EVA-based hot melt adhesive for use in the assembly of wire mesh to filter element material.
Filter-Lok® 34-947C™ – A white, EVA-based hot melt adhesive with a long open time; ideally suited for potting applications.
uni-Flex™ 34-1214™ – An EVA-based hot melt adhesive with very good adhesion to ABS plastic. Well suited for filter mini-pleat, face-welding applications.
Filter-Lok® 34-870C™ – A fast open time, low viscosity EVA-based hot melt adhesive for air filter pleating and mini-pleating applications.
Filter-Lok® 34-771C™ – A fast open time, low-medium viscosity EVA-based hot melt adhesive for air filter pleating and mini-pleating applications.
Filter-Lok® 34-967C™ – A fast open time, medium viscosity EVA-based hot melt adhesive for air filter pleating and mini-pleating applications.
Filter-Lok® 34-412B™ – A fast open time, medium-high viscosity EVA-based hot melt adhesive for air filter pleating and mini-pleating applications.
Instant-Lok® 34-2787™ – A moderate open time, co-polymer hot melt adhesive; ideal for wire mesh filter bonding and general potting applications. Good adhesion to plastics.
Instant-Lok® 34-342B™ – A lower viscosity version of Instant-Lok® 34-2787™.
Pressure SensitiveTechnomelt® 80-8697™ – A general purpose PSA hot melt designed for use in pre-applied applications with good adhesion to a variety of substrates
including plastics.
Technomelt® 86-8845™ – A permanent PSA hot melt designed as an aggressive high performance assembly system with high heat resistance and good peel and shear resistance.
Technomelt® 86-8848™ – A pressure sensitive hot melt adhesive designed as a foam-in-place gasket/sealing material. It exhibits superior foam structure at density reduction levels of 60%.
Technomelt® Q 80-8668™ – A high viscosity, permanent pressure-sensitive hot melt adhesive for applications that require high peel, shear and heat resistance. Provides high tack and good green strength. All ingredients approved for incidental food contact under Federal Regulation 21 CFR 175.105.
Macromelt® Q 5613™ – A low viscosity, general purpose PSA hot melt. Low residual tack. Excellent for foam and mattress assembly.
Technomelt® eM-357uS™ – A low viscosity, high performance PSA hot melt with aggressive tack and excellent flexibility.
Technomelt® eM-377uS™ – A medium viscosity, high performance PSA hot melt with aggressive tack and excellent flexibility.
Sanicare® 86-7110™ – A general purpose pressure-sensitive hot melt.
Versa-Weld™ 34-491C™ – A low-viscosity, sprayable, semi-pressure sensitive hot melt adhesive with good heat resistance. Long open time. UL approved. Widely used for lamination of facings to glass insulation mat.
52
Pr
od
uC
tS
Ho
t M
elt
A
dH
eS
IVe
Bo
nd
InG
Hot Melt adhesive Bonding
Products order Item number
Package Type
adhesive Type Viscosity, cps open Time
PoLYureTHane reaCTIVe HoT MeLT adHeSIVeS
Purmelt® r-623™ 1093047 Pail Polyurethane Hot Melt 12,000 @ 250°F 7-8 minutes
Purmelt® r-629™ 1102692 Drum Polyurethane Hot Melt 12,000 @ 250°F 5 minutes
Purmelt® Qr-4663™515224 Drum
Polyurethane Hot Melt 12,000 @ 250°F 4-5 minutes555170 Pail
Purmelt® r-200F+™
1338015 Pail
Polyurethane Hot Melt 20,000 @ 250°F 4-6 minutes1338014 Drum
1338013 2 kg Slugs
*Purmelt® 91-913a™ 1223189 Drum Polyurethane Hot Melt 13,000 @ 250°F 4-5 minutes
*Purmelt® 91-798a™
1223173 Pail
Polyurethane Hot Melt 13,000 @ 250°F 4-5 minutes1223168 Drum
1226169 Fibrecycle Keg
Purmelt® r-607™1132877 Drum
Polyurethane Hot Melt 9,000 @ 250°F 4 minutes1018932 Pail
Purmelt® r-630™1139456 Drum
Polyurethane Hot Melt 12,000 @ 250°F 3-4 minutes1139458 Pail
Purmelt® Qr-4668™733271 Drum
Polyurethane Hot Melt 12,000 @ 250°F 3-4 minutes1009404 Pail
*Purmelt® 91-834a™
1223178 Pail
Polyurethane Hot Melt 11,000 @ 275°F 3-4 minutes1223174 Drum
1276038 Fibrecycle Keg
*Purmelt® 91-194B™1219449 Pail
Polyurethane Hot Melt 20,000 @ 250°F 2-4 minutes1219448 Drum
*Purmelt® 91-831B™ 1219495 Drum Polyurethane Hot Melt 25,000 @ 250°F 3-4 minutes
Purmelt® r-246C™ 737463 Drum Polyurethane Hot Melt 12,000 @ 250°F 2 minutes
Purmelt® r-608C™
1062313 Drum
Polyurethane Hot Melt 9,000 @ 250°F 50 seconds837562 Pail
897796 2 kg Slugs
Purmelt® r-633™ 1153895 Pail Polyurethane Hot Melt 44,000 @ 266°F 30 seconds
*Purmelt® 91-004a™1262696 Pail
Polyurethane Hot Melt 10,000 @ 250°F 1-2 minutes1262692 Drum
Purmelt® Purfect glaze 91-822a™1219493 Drum
Polyurethane Hot Melt 10,000 @ 275°F 1-2 minutes1219494 Pail
Purmelt® Purge 34-3182™ 1217501 Steel Drum Hot Melt 4,600 @ 250°F N/A
Purmelt® Purge 34-268d™ 1217245 Fiber Drum Hot Melt 4,600 @ 250°F N/A
Purmelt® Cleaner 2 245517 Sack Cleaner 6,500 @ 266°F N/A
Purmelt® Cleaner 34-785a™ 1217808 Drum Cleaner Flake at RT N/A
NEW!
NEW!
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
Listed on and complies with the Canadian Domestic Substances List
* Formerly branded as Pur-Fect Lok®. Name change only. New labels to appear starting September 2009.
53
Pr
od
uC
tS
Ho
t M
elt
A
dH
eS
IVe
Bo
nd
InG
reactive PolyurethanesLong open Time
Purmelt® r-623™ – Longest open time. Good for large panel laminations. Sprayable.
Purmelt® r-629™ – High temperature resistance. General purpose panel lamination. Good initial tack.
Purmelt® Qr-4663™ – A high green strength, aggressive tack product for panel lamination and quick fixturing of components to plastic.
Purmelt® r-200F+™ – A high heat resistant adhesive for panel assembly.
*Purmelt® 91-913a™ – A UL approved, clear polyurethane-based hot melt adhesive; well suited for bonding fiberglass to sheet metal, such as RV sidewalls.
*Purmelt® 91-798a™ – General purpose lavender adhesive for panel lamination like RV sidewalls. Good machining characteristics.
Medium open TimePurmelt® r-607™ – Low viscosity general lamination grade with good machining, less stringing and
stability on roll coater.
Purmelt® r-630™ – High green strength and good general purpose application.
Purmelt® Qr-4668™ – Panel lamination grade with good green strength.
*Purmelt® 91-834a™ – High green strength panel laminating adhesive.
*Purmelt® 91-194B™ – High green strength for smaller panels.
*Purmelt® 91-831B™ – High green strength with higher viscosity for better initial tack.
Fast open TimePurmelt® r-246C™ – Excellent adhesion to hard-to-bond substrates like plastics, metals
and aluminum.
Purmelt® r-608C™ – Very short open time and fast setting. Good adhesion to flexible substrates. Available in 4 lb. slugs.
Purmelt® r-633™ – A fast-setting, very high green strength adhesive with short open time. Provides excellent adhesion to synthetic materials, rubber and foam. Not recommended for roll coating.
*Purmelt® 91-004a™ – Fast setting for filter media bonding.
Purmelt® Purfect glaze 91-822a™ – A high green strength, short open-time polyurethane hot melt with excellent UV stability and adhesion to glass.
PurgesPurmelt® Purge 34-3182™ – Low viscosity hot melt for flushing unloading equipment lines.
Purmelt® Purge 34-268d™ – Low viscosity hot melt for flushing unloading equipment lines.
CleanersPurmelt® Cleaner 2 – Cleaning solution for flushing unloading equipment pumps and hoses.
Purmelt® Cleaner 34-785a™ – Cleaning agent for removing adhesive from applicator rolls.
* Formerly branded as Pur-Fect Lok®. Name change only. New labels to appear starting September 2009.
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
54
Liquid Moisture Cure PolyurethanesLong open Time
Macroplast® ur-8340™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Slow cure speed.
Macroplast® ur-8341™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Slow cure speed.
Macroplast® ur-8342™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Slow cure speed.
Medium open Time
Macroplast® ur-8343™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Medium cure speed.
Macroplast® ur-8344™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Medium cure speed.
Macroplast® ur-8345™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Medium cure speed.
Macroplast® ur-8345d™ – Red colored, high strength, thermoset liquid moisture cure adhesive for panel lamination. Medium cure speed
Fast open Time
Macroplast® ur-8346™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Fast cure speed.
Macroplast® ur-8347™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Very fast cure speed.
Macroplast® ur-8348™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Very fast cure speed.
Macroplast® ur-8349™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Very fast cure speed.
Pr
od
uC
tS
St
ru
Ct
ur
Al
Bo
nd
InG
Structural Bonding
Panel assembly is now even easier with the new Macroplast® UR-8340™ series of one-component moisture cure urethane adhesives – our next generation alternative to the SIA-110™ series. Improvements include better wet-out of the adhesive on multiple surfaces and higher bond strength on aluminum and other metals.
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
55
Pr
od
uC
tS
St
ru
Ct
ur
Al
Bo
nd
InG
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
Products
orde
r Ite
m
num
ber
Pack
age
Type
adhe
sive
Ty
pe
Visc
osity
, cp
s @
72°
F
open
Tim
e
Liquid Moisture Cure Polyurethanes
Macroplast® ur-8340™
1252516 Tote
1K Liquid PUR 5,000 110 minutes1252515 Drum
1252520 Pail
Macroplast® ur-8341™
1252531 Tote
1K Liquid PUR 5,000 38 minutes1252532 Drum
1252534 Pail
Macroplast® ur-8342™
1252536 Tote
1K Liquid PUR 5,000 30 minutes1252535 Drum
1252537 Pail
Macroplast® ur-8343™
1252984 Tote
1K Liquid PUR 5,000 22 minutes1252538 Drum
1252539 Pail
Macroplast® ur-8344™
1252542 Tote
1K Liquid PUR 5,000 13 minutes1252540 Drum
1252541 Pail
Macroplast® ur-8345™
1252544 Tote
1K Liquid PUR 5,000 12 minutes1252543 Drum
1252545 Pail
Macroplast® ur-8345d™ 1321862 Tote 1K Liquid PUR 5,000 12 minutes
Macroplast® ur-8346™
1252547 Tote
1K Liquid PUR 5,000 7 minutes1252546 Drum
1252548 Pail
Macroplast® ur-8347™
1252550 Tote
1K Liquid PUR 5,000 6 minutes1252549 Drum
1252551 Pail
Macroplast® ur-8348™
1252533 Tote
1K Liquid PUR 5,000 170 seconds1252572 Drum
1252519 Pail
Macroplast® ur-8349™
1252517 Tote
1K Liquid PUR 5,000 60 seconds1252518 Drum
1252360 Pail
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
Listed on and complies with the Canadian Domestic Substances List
56
Pr
od
uC
tS
St
ru
Ct
ur
Al
Bo
nd
InG
Structural Bonding
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
one-Component Liquid PolyurethanesLong open Time
Macroplast® SIa-110™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Slow cure speed. Red color available.
Macroplast® SIa-111™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Slow cure speed. Red color available.
Medium open Time
Macroplast® SIa-113SHV™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Medium cure speed.
Macroplast® ur 8224S™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Medium cure speed.
Macroplast® SIa-114™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Medium cure speed. Red color available.
Macroplast® SIa-115™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Medium cure speed. Red color available.
Fast open Time
Macroplast® SIa-116™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Fast cure speed.
Macroplast® SIa-117™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Very fast cure speed.
Macroplast® SIa-119™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Very fast cure speed.
Macroplast® ur-8229L™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Very fast cure speed and has UL certification for metal doors.
Plastic Bonding
Macroplast® ur-8331™ – Plastic bonding adhesive for replacement of solvent PURs.
Macroplast® ur-8332™ – Plastic bonding adhesive for replacement of solvent PURs.
Two-Component Liquid PolyurethanesMacroplast® uk-8103™ & uk-5400r™ – A two-component adhesive system for bonding panel composites, including hard
foams to metal. Also can be used for potting applications.
Macroplast® uk-1340™ – A high viscosity, 2K structural adhesive for composite plastics bonding in wind blades. GL® Certified product.
Macroplast® uk-5401™ – A high viscosity, 2K structural adhesive for composite plastics bonding in wind blades. GL® Certified product.
GL is a trademark of Germanischer Lloyd.
57
Pr
od
uC
tS
St
ru
Ct
ur
Al
Bo
nd
InG
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
Products
orde
r Ite
m
num
ber
Pack
age
Type
adhe
sive
Ty
pe
Typi
cal
Visc
osity
, cps
@
72°
F
Typi
cal
open
Tim
e
Liquid Moisture Cure Polyurethanes
Macroplast® SIa-110™
7909039 Tote
1K Liquid PUR 5,000 110 minutes799053 Drum
1038105 Pail
Macroplast® SIa-111™
861051 Tote
1K Liquid PUR 5,000 38 minutes1021284 Drum
1050111 Pail
Macroplast® SIa-113SHV™804148 Tote
Pail1K Liquid PUR 7,000 22 minutes
1038104
Macroplast® ur 8224S™515525 Drum
1K Liquid PUR 7,000 17 minutes1048865 Pail
Macroplast® SIa-114™
804582 Tote
1K Liquid PUR 5,000 13 minutes843971 Drum
1048864 Pail
Macroplast® SIa-115™
805205 Tote
1K Liquid PUR 5,000 12 minutes805204 Drum
1059363 Pail
Macroplast® SIa-116™805711 Tote
1K Liquid PUR 5,000 7 minutes1047788 Pail
Macroplast® SIa-117™
805713 Tote
1K Liquid PUR 5,000 6 minutes981885 Drum
1019888 Pail
Macroplast® SIa-119™861052 Tote
1K Liquid PUR 5,000 170 seconds1019887 Pail
Macroplast® ur-8229L™644301 Tote
1K Liquid PUR 5,000 100 seconds1062312 Pail
Macroplast® ur-8331™1162783 Tote
1K Liquid PUR 12,000 45 minutes 1162477 Drum
Macroplast® ur-8332™1145614 Tote
1K Liquid PUR 16,000 30 minutes1139761 Pail
Two-Component Liquid Polyurethanes
Macroplast® uk-8103™ & uk-5400r™
1768845 gal. Pail – UK-8103™
2K Liquid PUR Mixture 9,000 55 minutes
5154965 gal. Pail – UK-5400R™
Macroplast® uk-1340™ TBD Drum 2K Paste PUR 300,000 2 hours
Macroplast® uk-5401™ TBD Drum 2K Paste PUR 300,000 2 hours
NEW!
Listed on and complies with the Canadian Domestic Substances List
NEW!
NEW!
58
one-Component epoxiesTerokal® 2300™ – This one-component, heat cure, structural adhesive is 50% expandable for
stiffening and joining applications, and has limited fracture toughness. Can be applied directly to oily substrates.
Terokal® 2400™ – An epoxy-based, heat cure, expandable, wash resistant, structural adhesive for use in Body-In-White to improve stiffness, reduce spot weld requirements, or join metal where spot welds are not practical. Increases vehicle rigidity.
Terokal® 3005™ – This one-component, solvent-free, induction-curable, structural resin is used for hem flange bonding applications where low peel and impact forces are encountered. Has induction curable capabilities to achieve very short fixture times, can be cured in a standard oven and applied directly to oily substrates.
Terokal® 4555B™ – This one-component, solvent-free, impact-resistant, heat-curable structural resin is a workhorse for vehicle stiffening applications, as well as an all-around adhesive with good toughness and high peel resistance. Can be applied directly to oily substrates.
Terokal® 5011™ – This one-component, solvent-free, impact-resistant, heat-curable, 100% expandable version of Terokal® 4555B™ is for applications with uneven joint gap thickness. Can be applied directly to oily substrates.
Terokal® 5089™ – A high performance, impact-resistant, one-component, heat-curable, epoxy-based structural adhesive that can be spot-welded through. Exhibits excellent strength and corrosion resistance at temperature extremes and after extensive aging and weathering.
eccobond® a-316-30™ – A one-component, non-sag, heat cured, epoxy adhesive with excellent thermal stability up to 350°F and resistance to water and many aggressive chemical fluids. Excellent adhesion to most metal surfaces. Well-suited for aerospace filters requiring hi-temp. Skydrol® resistance.
eccobond® a-329-1™ – A one-component, non-sag, heat cured, epoxy adhesive with excellent thermal stability up to 350°F, and resistance to water and many aggressive chemical fluids. Excellent adhesion to most metal surfaces. Well-suited for aerospace filters requiring hi-temp. Skydrol® resistance.
eccobond® a-359™ – A one-component, non-sag, heat cured, high strength epoxy adhesive with excellent thermal stability up to 350°F, and resistance to water and solvents. Excellent adhesion to most metal surfaces. Well-suited as a brazing replacement for HVAC tube assemblies.
Pr
od
uC
tS
St
ru
Ct
ur
Al
Bo
nd
InG
Structural Bonding
The Teroson® line of structural adhesives makes designers’, engineers’ and manufacturing processors’ lives easier and less complicated. From fracture-toughened structural adhesives that eliminate welding to hem flange adhesives for bonding inner and outer shells, our complete line of industrial adhesives have the integrity to handle your applications. Teroson® branded products meet OEM specifications designed to maintain system integrity while providing manufacturing process flexibility. These high performance products are used in component fabrication and assembly plants prior to paint shops, and are compatible with pretreatment and paint process chemistries.
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
59
Pr
od
uC
tS
St
ru
Ct
ur
Al
Bo
nd
InG
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
Products
orde
r Ite
m n
umbe
r
Pack
age
Type
Pack
age
Wei
ght
Base
Che
mis
try
or
Cure
Sys
tem
Colo
r
Subs
trat
es
Broo
kfiel
d Ce
ntas
ise
cPs
Cure
Tim
e/Te
mp
@
PMT
(Pea
k M
etal
Te
mpe
ratu
re).
Cure
ra
tes
may
var
y de
pend
ing
on ti
me
and
tem
pera
ture
.
Shea
r Str
engt
h Cr
S
T-Pe
el C
rS
Impa
ct r
esis
tanc
e Cr
S
appr
oval
s
one-CoMPonenT ePoxIeS
Terokal® 2300™ 887561 887651 888331
1061206
Drum Pail
Cartridge 1/2 Drum
210 kg 23 kg
12 pack 105 kg
1K Epoxy
BlackCRS, HDG, EG,
Galvanneal80,000
>20 minutes at 160°C
2,000 psi 25 pli60
inch/lbs.DaimlerChrysler
MS-CD457 Type B
Terokal® 2400™ 1072897 1076983 1072467 1076981
Drum 1/2 Drum
Pail Cartridge
256 kg 128 kg 20 kg
12 pack
1K Epoxy
BlackCRS, HDG, EG, Galvanneal, Al
180,000>20 minutes at
160°C2,000 psi 25 pli
60 inch/lbs.
Terokal® 3005™ 889239 595663 913557
Drum Pail
Cartridge
273 kg 21 kg
12 pack
1K Epoxy
Green CRS, HDG, EG 70,000>15 minutes at
170°C 10 Mpa • • Ford
WSSM 2G300A2
Terokal® 4555B™722150 965871 913559
Drum Pail
Cartridge
227 kg 18 kg
12 pack
1K Epoxy
BlackCRS, HDG,
EG, Al90,000
>15 minutes at 160°C
20 Mpa 10 N/mm 20 N/mm
Ford WSBM 2G388 A GM 998-2281
GM 3639M
Terokal® 5011™910474 621423 910474 897473
Drum Pail
1/2 Drum Cartridge
232 kg 24 kg 116 kg 12 pack
1K Epoxy
BlackCRS, HDG,
EG, Al90,000
>15 minutes at 160°C
17 Mpa 5 N/mm 10 N/mm
Ford WSBM 2G411AGM 998-2281
GM 3639M
Terokal® 5089™1182927 1253838 1182761
Drum Pail
1/2 Drum
220 kg 19 kg 110 kg
1K Epoxy
PurpleCRS, HDG,
EG, Al100,000 at 50°C
>10 minutes at 155°C
20 Mpa>100 N/ 25mm
25 N/mm
eccobond® a-316-30™
1219097 5 Gal. Pail –1K
EpoxyGrey Metals Paste
>10 minutes 320°F
2,200 psi 5 pli Western Filter
eccobond® a-329-1™
1215360 1215359
1 Quart 5 Gal. Pail
–1K
EpoxyBeige Metals Paste
>10 minutes 320°F
2,000 psi 3 pli GE
eccobond® a-359™
1215366 1215365 1215364
305 ml Cartridge 12 Oz. Cartridge
5 Gal. Pail–
1K Epoxy
GreyMetals,
Thermoset Plastics
Paste>5 minutes at
160°C 3,300 psi 5 pli • GE, Borg Warner
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
• = Product has not been evaluated for this performance property.
60
Pr
od
uC
tS
elA
St
oM
er
IC
Bo
nd
InG
& S
eA
lIn
G
elastomeric Bonding & Sealing
Terostat® MS elastomeric adhesives and sealants are moisture curing, saline-modified polymers that provide strong, resilient bonds to many substrates – all without the need for a primer. Terostat® MS products are isocyanate and solvent free, noncorrosive, and compatible with most paint systems. Once fully cured, these high-performance elastomers provide excellent weathering and aging resistance.
Terostat® MS 930™ – Soft, elastic sealant for seam and joint sealing; used in railway and container manufacture and HVAC applications.
Terostat® MS 935™ – Elastic one-component sealer with excellent adhesion to many substrates; balance of elastomeric and adhesive properties.
Terostat® MS 939™ – Combination of high elongation and high tensile strength. It has good adhesion to many substrates, as well as good impact and peel resistance.
Terostat® MS 9360™ – Designed for elastic bonding and sealing of both painted and un-painted metal substrates; one-component.
Terostat® MS 9380™ – High tensile strength and high hardness elastomeric product; used in adhesive bonding applications subject to harsh environmental conditions.
Terostat® MS 9399™ – A two-part adhesive system ideal for use when the curing rate of one-part adhesives is too slow, such as in deep channels, or where moisture cannot penetrate to cure. Parts A & B have a 1:1 mix ratio and create a sealant that is non-sagging, has high initial tack and fast set time.
Terostat® MS 9371™ – A curing rate accelerant used in conjunction with various grades of Terostat® brand MS sealants, such as MS 930™ and MS 939™; hastens curing throughout the depth of the applied bead; mixed in a 10:1 ratio using metering system or plural dispensing static mix caulking guns.
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
61
Pr
od
uC
tS
elA
St
oM
er
IC
Bo
nd
InG
& S
eA
lInG
Products application Type
Item number
Pkg Size Color ViscosityShore a
Hardness
Cure rate (mm/
24 hrs.)
Skinover (min.)
Tensile Strength
(MPa)
elongation at Break
Service Temperature
Test Certificates
Terostat® MS 930™
Sealing
264872 310 ml cartridge White
Thixotropic Paste
30 4 25 – 40 1.0 250%-50°C up to
+80°C
FDA Status Germanischer Lloyd (sensoric test) BSS 7239
100139 310 ml cartridge Grey
261896 310 ml cartridge Black
237971 250 kg drum Black
Terostat® MS 935™
Sealing
251696 310 ml cartridge Grey
Thixotropic Paste
50 3 10 – 15 2.8 230%-40°C up to
+100°C
Sensoric test acc. to DIN 10955 Declaration of no objection acc. to ISEGA DIN 1846 fungus resistance UL 94HB
1228525 25 kg pail Grey
192487 310 ml cartridge Black
146063 25 kg pail Black
Terostat® MS 939™
Bonding
97325 310 ml cartridge White
Thixotropic Paste
55 3 10 3.0 250%-40°C up to
+100°CUL Listed
238156 250 kg drum White
99164 310 ml cartridge Grey
100146 310 ml cartridge Black
388927 25 kg pail Black
504842 250 kg drum Black
Terostat® MS 9360™
Bonding 101134 310 ml cartridge Black Thixotropic
Paste> 50 3 10 3.5 200%
-40°C up to +100°C
ASTM E 662 ASTM E 162 BSS 7239 193856 25 kg pail Black
Terostat® MS 9380™
Bonding 100149 310 ml cartridge White Thixotropic
Paste> 65 3 5 – 10 4.0 120%
-40°C up to +100°C
Germanischer Lloyd (elastomeric adhesive) 113048 250 kg drum White
Terostat® MS 9399™
Bonding
964329400 ml dual cartridge
BlackTwo-
Part 1:1 Thixotropic
Paste
60 Unlimited 30 3.0 150%-40°C up to
+100°C NF P 92507, M1 NF F 16-101
757439 Component A
250 kg drum Black
757440 Component B
250 kg drum Black
Terostat® MS 9371™
Accelerator 700910 25 kg pail Neutral10:1 Mix
Ratio
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
62
Pr
od
uC
tS
Po
tt
InG
, Mo
ldIn
G
& e
nC
AP
Su
lAt
InG
Potting, Molding & encapsulating
Potting and encapsulating compounds are used to fill large voids and provide mechanical reinforcement to housed or unitized assemblies, as well as to protect components from the effects of exposure to chemicals, moisture, mechanical shock, and vibration. Sealing components with potting and encapsulating compounds prevents corrosion and ensures long-term integrity of the device. To assist manufacturers in meeting these challenges, Henkel offers a wide range of one-part and two-part epoxy and polyurethane compounds.
Two-Component Liquid PolyurethanesFilter-Lok® 82-072a™/82-072B™ – A filled, low-viscosity, two-component, room temperature curing,
tough elastomeric urethane adhesive designed for bonding/sealing in a wide variety of air filter applications. Fast gel time. Low shrinkage. Low temperature flexibility.
Filter-Lok® 82-201a™/82-180B™ – A room temperature curing polyurethane compound which cures to a tough, resilient adhesive. Ideal for potting of air filter media and ambient air filter end-cap forming. Product is self leveling, fast de-molding, low wicking and minimal bubbling when potting high moisture containing filter media.
Filter-Lok® 82-226a™/82-226B™ – A flexible two-component, room temperature curing, elastomeric urethane compound designed for bonding and sealing in a wide variety of air filter applications. Excellent adhesion to filter media, including fiberglass, cellulose and synthetic media.
Filter-Lok® 82-413a™/82-413B™ – A filled, low-viscosity two-component, room temperature curing, tough elastomeric urethane adhesive with fast gel time. Designed for bonding/sealing in a wide variety of air filter applications.
Filter-Lok® 82-425a™/82-425B™ – A two-component, fast-curing low viscosity, urethane adhesive/ sealer. The product cures to a high strength polyurethane with excellent metal adhesion and durability. Especially useful for use as an end-cap product for air filters exposed to a variety of conditions.
Filter-Lok® 82-180a™/82-180B™ – A self-leveling, fast de-molding and low wicking polyurethane compound which cures at room temperature to form tough, resilient and chemical resistant bonds. Suggested uses include potting of water filter media and ambient water filter end-cap forming.
Filter-Lok® 82-178a™/82-178B™ – A room temperature curing polyurethane compound which offers an excellent balance of membrane penetration and surface holdout, resulting in excellent fiber tearing bonds. Resists bubbling when used on wet substrates, making it suitable for wet and dry membranes. Excellent hydrolytic stability, and very resistant to a wide range of pH and temperatures. Conforms to the requirements of FDA 175.105 and is certified to NSF 61.
Macroplast® uk-8103™ & uk-5400r™ – A two-component adhesive system for bonding panel composites, including hard foams to metal. Also can be used for potting applications.
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
63
Pr
od
uC
tS
Po
tt
InG
, Mo
ldIn
G
& e
nC
AP
Su
lAt
InG
Productsorder Item
numberPackage Type Product Type Color Viscosity (cps)
Mix ratio a:B (by volume)
Work Life
TWo-CoMPonenT LIQuId PoLYureTHaneS
Filter-Lok® 82-072a™/82-072B™
1219038 55 gal. Drum - Part A
2K PolyurethaneWhite/Dark
Brown30,000 / 200 3.2 : 1 150 sec.1219039 5 gal. Pail - Part B
1219040 55 gal. Drum - Part B
Filter-Lok® 82-201a™/82-180B™1219075 55 gal. Drum - Part A
2K Polyurethane Blue/Amber 1300 / 1100 2 : 1 60 - 90 sec.1219067 55 gal. Drum - Part B
Filter-Lok® 82-226a™/82-226B™
1219084 55 gal. Drum - Part A
2K Polyurethane Black/Amber 1700 / 6700 2.9 : 1 5 - 7 min.1219087 5 gal. Pail - Part B
1219088 55 gal. Drum - Part B
Filter-Lok® 82-413a™/82-413B™1219110 Tote - Part A
2K PolyurethaneWhite/Dark
Brown2200 / 100 2.5 : 1 210 sec.
1219111 Tote - Part B
Filter-Lok® 82-425a™/82-425B™ 1254385 5 gal. Pail - Part A2K Polyurethane White/Brown 3000 / 100 1.9 : 1 45 sec.
1254386 5 gal. Pail - Part B
Filter-Lok® 82-180a™/82-180B™1219066 55 gal. Drum - Part A
2K Polyurethane Blue/Amber 1500 / 1100 1.34 : 1 120 sec.1219067 55 gal. Drum - Part B
Filter-Lok® 82-178a™/82-178B™
1219058 55 gal. Drum - Part A
2K Polyurethane Amber/Amber 22,000 / 22,000 1 : 1 46-60 min.1219060 Tote - Part A
1219061 55 gal. Drum - Part B
1219063 Tote - Part B
Macroplast® uk-8103™ & uk-5400r™
176884 5 gal. Pail - UK-8103™2K Polyurethane Amber 27,000 / 250 3.7 : 1 55 min.
515496 5 gal. Pail - UK-5400R™NEW!
NEW!
NEW!
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
64
Pr
od
uC
tS
Po
tt
InG
, Mo
ldIn
G
& e
nC
AP
Su
lAt
InG
Potting, Molding & encapsulating
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
one-Component Liquid epoxieseccobond® a-304-6™ – A general purpose, one-component, flowable, epoxy adhesive with excellent
thermal stability and resistance to many chemicals.
eccobond® a-304-40™ – A general purpose, one-component, flowable, epoxy adhesive with excellent thermal stability and resistance to many chemicals. Good for use with Skydrol®, and many aggressive fluids.
eccobond® a-316-43™ – A general one-component, flowable, epoxy adhesive with excellent thermal stability and resistance to many chemicals. Good cold/impact properties.
eccobond® 908-38™ – A one-component, flowable, epoxy adhesive with excellent thermal stability and resistance to many chemicals. Excellent cold/impact properties.
eccobond® a-316™ – A general purpose, one-component, flowable, epoxy adhesive with excellent thermal stability and resistance to many chemicals. Good for use with Skydrol®, and many aggressive fluids.
eccobond® a-316-20™ – A one-component, flowable, epoxy adhesive with excellent thermal stability and resistance to many chemicals. Good for use with Skydrol®, and many aggressive fluids.
Two-Component Liquid epoxiesBondmaster® eTP 3400™ – A versatile, fast curing two-part epoxy with very good chemical resistance
to automotive and hydraulic fluids.
Bondmaster® e3520™ – A two-part epoxy that provides high bond strength to metal components and good chemical resistance to automotive and hydraulic fluid
Bondmaster® e3346™ – A two-part adhesive/encapsulant with a controlled exotherm and a long usable life. Cures after only several hours at room temperature, but without the accompanying high heat build-up of other epoxies. Especially suited for the production of membrane filters.
Bondmaster® e3030™ – A two-part, low-viscosity, room temperature curing adhesive with a controlled exotherm and a long usable pot life. Especially suited for the production of membrane filters.Environmentally Friendly – 100% Solids. Low shrinkage.
65For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
Productsorder Item
numberPackage Type
Product Type
Color Viscosity (cps)Mix
ratioWork Life
Cure Time/Temperature
one-CoMPonenT LIQuId ePoxIeS
eccobond® a-304-6™ 1215361 5 gal. Pail 1K Epoxy Blue 20,000 N/A Indefinite 320°F for 5 min.
eccobond® a-304-40™ 1215369 5 gal. Pail 1K Epoxy White 20,000 N/A Indefinite 320°F for 5 min.
eccobond® a-316-43™1215357 5 gal. Pail
1K Epoxy Beige 25,000 N/A Indefinite320°F for 5 min.
1215358 55 gal. Drum
eccobond® 908-38™ 1215354 5 gal. Pail 1K Epoxy Blue 40,000 N/A Indefinite 320°F for 5 min.
eccobond® a-316™1215371 1 liter Container
1K Epoxy Beige 40,000 N/A Indefinite 320°F for 5 min.1215372 5 gal. Pail
eccobond® a-316-20™ 1219096 5 gal. Pail 1K Epoxy Grey 40,000 N/A Indefinite 320°F for 5 min.
TWo-CoMPonenT LIQuId ePoxIeS
Bondmaster® eTP 3400™1219102 1 gal. Container - Part A
2K Epoxy White 50,000 4 : 1 10 min. 72°F for 24 hrs.1219103 1 gal. Container - Part B
Bondmaster® e3520™1219051 1 liter Container - Part A
2K Epoxy Grey 15,000 2 : 1 60 min. 72°F for 72 hrs.1219052 1 liter Container - Part B
Bondmaster® e3346™1219149 55 gal. Drum - Part A
2K Epoxy Red / Blue 5,000 / 50,000 2 : 1 60 min. 72°F for 72 hrs.1219150 55 gal. Drum - Part B
Bondmaster® e3030™
1219165 25 liter Pail - Part A
2K Epoxy Red / Blue 2,700 / 20 3 : 1 60 min. 72°F for 72 hrs.1219166 5 gal. Pail - Part B
1219167 25 liter Pail - Part B
Pr
od
uC
tS
Po
tt
InG
, Mo
ldIn
G
& e
nC
AP
Su
lAt
InG
66
Seam Sealing
Body Shop anti-FluttersTerostat® 06-1272™ – This non-expanding, weld through sealer has enhanced shear adhesion, gas
resistance and is highly wash-off resistant, which offers good corrosion resistance, high elasticity, and bond without read-through. Application can be manual or automated.
Terostat® 06-1242™ – This pumpable, high expandable, weld through, gas resistant body shop sealer designed for oily or galvanized steel offers good corrosion resistance, high elasticity, and bond without read-through. Application can be manual or automated.
Terostat® Sa-4510™ – This elastomeric-based, cold-applied, pumpable adhesive is designed to expand when subjected to heat to form a soft-closed cell foam. Has good adhesion on oily metal surfaces and excellent wash resistance when applied between inner and outer panels to prevent metal-to-metal contact and to reduce vibration.
Terostat® Sa-490™ – This elastomeric-based, cold-applied, pumpable, non-PVC sealer has good adhesion on oily metal and aluminum surfaces, and excellent wash resistance. Applied between inner and outer panels to prevent metal-to-metal contact and to reduce vibration.
Terostat® Sa-491™ – This elastomeric-based, cold-applied, pumpable, non-PVC sealer has good adhesion on oily metal and aluminum surfaces, and excellent wash resistance. Applied between inner and outer panels to prevent metal-to-metal contact and to reduce vibration.
Body Shop SealantsTerostat® 4000-F™ – This elastomeric-based, room temperature-applied sealant cures and expands upon
heating and is designed to seal welded interior body panels.
Terostat® 06-1201™ – This pumpable, expandable, weld-through, gas-resistant body shop sealer for oily or galvanized steel offers good corrosion resistance, high elasticity, and bond without read-through. Application can be manual or automated.
Terostat® 2102™ aC/BC™ – This solvent-free, two-component, rubber-based adhesive/sealant is dispensed using high-pressure pumps and mixed statically to start reacting at ambient temperature. Wash-off resistant to pretreatment after approximately one hour (as used on the production line in the automobile industry). Final curing occurs in the electrocoat oven.
Terostat® Sa-463™ – This elastomeric-based, cold-applied, pumpable, weld-through sealer has good adhesion on oily metal surfaces and excellent wash resistance making it ideal for spot welded joints to prevent passage of water or dust. Also used for anti-flutter applications to prevent metal-to-metal contact and reduce vibration.
Specialty ProductsTerostat® 6100g™ – This pumpable, highly expandable, weld-through, gas-resistant body shop sealer
is designed for oily or galvanized steel, offering good corrosion resistance, high elasticity, and bond without read-through. A good candidate for void filling in acoustical applications.
Terostat® 960H™ – This permanently plastic, solvent-free, strongly adherent, one-component sealant/adhesive based on polyisobutylene is designed to adhere plastic trim to glass for a short time period until the plastic component is mechanically fastened.
Terostat® 962-uS™ – This permanently plastic, strongly adherent, one-component sealant/adhesive based on butyl rubber can be hot applied, so that it softens to a large extent, but won’t melt, making it ideal for working overhead and on vertical surfaces.
Terostat® 1297™ – This expanding, weld-through, semi-structural sealer has enhanced shear adhesion, gas resistance and is wash-off resistant with low to zero VOCs. Offers good corrosion resistance, high elasticity and bond without read-through. Application can be manual or automated.
Pr
od
uC
tS
Se
AM
Se
AlI
nG
The seam sealing capabilities of the Teroson® line of products are world-class and second to none. These products range from weld seam sealers to anti-flutter expandables for the control of water, air, fuel and vibration. Teroson® seam sealers are available in easy-to-handle cartridges, pails and drums for convenient dispensing. From expandable products to paintable products, our seam sealing products are approved for use prior to or after the metal pretreatment process and are compatible with paint finishing systems.
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
67
Products
Chem
ical
Ba
sis
orde
r Ite
m
num
ber
Pack
age
Type
Pack
age
Wei
ght
Colo
r
Min
imum
%
Solid
s
Spec
ific
grav
ity
Visc
osity
, cp
s
% V
olum
e Ch
ange
appl
icat
ion
Tem
pera
ture
Cure
Pro
file
rem
arks
BodY SHoP anTI-FLuTTerS
Terostat® 06-1272™
Rubber/PVC
592972 594180 594755 929891
DrumPail
1/2 DrumCartridge
277 kg 26 kg 149 kg12 pack
Grey 97 1.4 150,000 0 RT>25' @ 160°C <60' @ 200°C
Essentially non-expandable
Terostat® 06-1242™
Rubber/PVC
594164 594750 910475
DrumPail
Cartridge
240 kg 23 kg
12 packBlack 98.25 1.25 175,000 450-600 RT
>25' @ 160°C <60' @ 200°C
Terostat® Sa-4510™
Rubber/PVC
635756 870909 919687 919688
Drum 1/2 Drum
Pail Cartridge
256 kg 123 kg 24 kg
12 pack
Pale Yellow
99 1.3 130,000 240-310 RT >20' @ 163°C MS-CD 470F
Terostat® Sa-490™
Acrylic Plastisol
1066011 1066508 938255
DrumPail
Cartridge
269 kg 24 kg
12 packGrey 98 1.35-1.45 120,000 0 RT For aluminum
Terostat® Sa-491™
Acrylic Plastisol
1065563 1174007 1065562 938251
Drum 1/2 Drum
Pail Cartridge
285 kg143 kg 24 kg
12 pack
Grey 98 1.45-1.55 120,000 RT For aluminum
BodY SHoP SeaLanTS
Terostat® 4000-F™
Rubber/PVC
847258 847256 847257 1064387
Drum 1/2 Drum
Pail Cartridge
272 kg 136 kg 26 kg
24 pack
140,000
Terostat® 06-1201™
Rubber/PVC
594175 594178
DrumPail
277 kg 26 kg
Black 99 1.4 150,000 RT>25' @ 160°C <60' @ 200°C
150% expansion; gasoline resistant
Terostat® 2102™ aC/BC™
Rubber
668244 759300 981575 981618 1126700 1145896
Drum Pt A Drum Pt B Pail Pt APail Pt B Cartridge Cartridge
250 kg 230 kg20 kg 20 kg
400 ml 50 ml
Black 98 1.4 90,000 35C 30' @ 175°CTwo-part hem sealer;
wash-off resistant after 1 hour
Terostat® Sa-463™
Rubber598486 598485
Drum Pail
272 kg26 kg
Black 97 1.46 100,000 RT>20' @ 130°C <30' @ 160°C
SPeCIaLTY ProduCTS
Terostat® 6100g™
Rubber TBA 160,000
Terostat® 960H™ Rubber 621106 Drum 179 kg Black 99.5200,000 at 100°C
0
Hot applied, permanently plastic adhesive/sealant for encapsulating glass
Terostat® 962-uS™
Rubber 594271 Drum 200 kg Black 100 1.25-140100,000 at 100°C
0Hot applied; used on
sunroofs
Terostat® 1297™ Rubber863166 929894
Drum Cartridge
269 kg 12 pack
Black 97 1.3490,000 at
100°C
Pr
od
uC
tS
Se
AM
Se
AlIn
G
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
NEW!
68
energy, nVH, and Fluid Management
Henkel offers innovations in strain energy, NVH and air/fluid management that are used in agricultural or heavy equipment, recreational vehicles, appliances, power equipment, pumps and compressors, specialty vehicles and more. We offer a host of products that manage stress and strain energies of an assembly, allowing it to absorb shock without damage; products that manage airborne and structure-borne noise, vibration and harshness; and products that manage the intrusion of air, water, fuel and other elements into assemblies.
We are uniquely able to engineer sprayable sound deadeners, sealing strips, paintable tapes, pumpables, three-dimensional expanding structural and sealing parts, and other products for very specific industry applications.
Structural BondingTerokal® 4555B™ – This one-component, solvent-free, impact-resistant, heat-curable, structural resin is
a workhorse for vehicle stiffening applications as well as an all-around adhesive with good toughness and high peel resistance. Can be applied directly to oily substrates.
Terocore® 20003™ – This heat-curing, epoxy-based structural adhesive in tape form provides adhesion to electrocoated or primed metal, and also to galvanized or cold-rolled steel and aluminum with nominal coatings of drawing compounds or lubricants typically used in the automotive industry.
Terocore® 20101™ – Epoxy-based, 50% expandable, high-strength structural weld-through tape ideal in spot weld joints to increase rigidity.
Fluid Management – air & WaterTerostat® 10102™ – Weldable sealer tape, medium expansion (60-140%) body shop, low sag, with film.
Terostat® 06-1273™ – This pumpable, 200% expansion, weld-through, gas-resistant, controlled expansion body shop sealer is designed for oily or galvanized steel. Application can be manual or automated.
Terophon® 23100™ – Deadener, butyl/aluminum foil laminate, constrained layer.
Terostat® 13003™ – This heat-curing, paint shop-applied, tacky, magnetic, paintable sealer supplied in tape form is designed to seal metal seams on most electrocoated metal surfaces.
Terostat® 15101™ – Dry flowable, injection molded hot melt sealer.
Terostat® 19004™ – Structural sealer tape, high tensile.
Terostat® 10004™ – This heat-curing, rubber-based, weldable sealer in tape form provides adhesion to electrocoated or primed metal, and also to galvanized or cold-rolled steel and aluminum with nominal coatings of drawing compounds or lubricants typically used in the automotive industry.
Terostat® MS 930™, MS 935™, MS 939™ – Gun grade, one-component sealants based on silane modified polymer, cure by reaction with moisture to soft elastic products and are free of solvents, isocyanates, silicones and PVC.
Structural reinforcementTerocore® 16301™ – Non-magnetic, high strength, 100% expandable, structural epoxy, metal
reinforcement patch designed to reinforce sheet metal from deflection and deformation due to oil-canning effect by reducing stress and strain energy. Ideal in hood, roof and sidewall construction.
Terocore® 1811™ – Structural reinforcing, dimensionally stable injection molded structural foam.
Terocore® 1030Hx-01™ – Structural reinforcing, energy management, semi-tacky, 100% expanding structural foam.
noise, Vibration and Harshness reductionTerophon® 21007™ – Heat-curing, body shop-applied, dry, medium expansion material, used to fill pillars
and cavities; provides excellent adhesion to electrocoated or typical oily metal surfaces.
Terophon® 22100™ – Tacky, 1000% expandable minimum, NVH sealer.
Terophon® 23100™ – Deadener, butyl/aluminum foil laminate, constrained layer.
Terophon® 2751™ – This waterborne compound is a sound deadening coating, designed to allow the user to eliminate current interior sealer and acoustic melt sheets. Spray-applied using airless equipment and can be cured at room temperature.
Terophon® 18101™ – Expandable NVH anti-flutter material for aluminum substrates.
Terophon® 21301™ – Dry air baffle NVH material, expandable 1000+ %, sag resistant.
Terostat® 27006™ – Dry, injection molded, extruded fuel resistant, expandable, target expansion = 300%.
Pr
od
uC
tS
en
er
Gy,
nV
H, A
nd
Fl
uId
MA
nA
Ge
Me
nt
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
69
Products
Chem
istr
y
Cure
appl
icat
ion
Shea
r Str
engt
h (p
si)
Feat
ures
STruCTuraL BondIng
Terokal® 4555B™ Epoxy Heat Pre-Metal Treatment 2,068 High peel strength
Terocore® 20003™ Epoxy Heat Pre-Metal Treatment 2,000High strength weldable tape expansion
range 0% - 30%
Terocore® 20101™ Epoxy Heat Pre-Metal Treatment 1,000Medium strength weldable tape
expansion range 40% - 80%
FLuId ManageMenT – aIr & WaTer
Terostat® 10102™ Rubber Heat Pre-Metal Treatment NAWeldable tape / die-cut expansion
range 60% - 140%
Terostat® 06-1273™ Rubber Heat Pre-Metal Treatment NAWeldable, pumpable, high wash-off resistance, expansion range 200%
Terophon® 23100™ Butyl Non-Heat Post Paint >40A non-expanding, non-heat, pressure
sensitive butyl, to be used in strip form
Terostat® 13003™ EVA Heat Post-Metal Treatment NATacky magnetic tape / die-cut
paintable, high sag
Terostat® 15101™ EVA Heat Post-Metal Treatment NA Hot melt medium flow tape / die-cut
Terostat® 19004™ EVA Heat Pre-Metal Treatment 600 Tensile Hot melt, high tensile, tape / rope
Terostat® 10004™ Rubber Heat Pre-Metal Treatment NAWeldable tape / die-cut expansion
range 15% - 60%
Terostat® MS 930™ MS Polymer Moisture After Topcoat NAPumpable, good paint compatibility,
odorless
Terostat® MS 935™ MS Polymer Moisture After Topcoat NAPumpable, good paint compatibility,
odorless
Terostat® MS 939™ MS Polymer Moisture After Topcoat NAPumpable, good paint compatibility,
odorless
STruCTuraL reInForCeMenT
Terocore® 16301™ Epoxy Heat Pre-Metal Treatment196 N Three-Point
DeflectionLow-density reinforcement composite
Terocore® 1811™ Epoxy Heat Pre-Metal Treatment1,100 MPa
(Compressive Modulous)Injection moldable, dimensionally stable, reinforcement composite
Terocore® 1030Hx-01™ Epoxy Heat Pre-Metal Treatment1,100 MPa
(Compressive Modulous)100% expanding, extruded die-cut,
reinforcement composite
noISe, VIBraTIon and HarSHneSS reduCTIon
Terophon® 21007™ Rubber Heat Pre-Metal Treatment NADry extrudable / injection moldable,
expansion range 300% - 400%
Terophon® 22100™ Rubber Heat Pre-Metal Treatment NATacky extrudable expansion range
1000%
Terophon® 23100™ ButylPressure Sensitive
Post Paint >40 N Peel AdhesionVibration damper, excellent adhesion to
steel and other surfaces
Terophon® 2751™ PolyacrylateWater
Evaporation/HeatPre/Post Paint NA Liquid applied (lasd)
Terophon® 18101™ Rubber Heat Pre-Metal Treatment NA Anti-flutter, 350% - 450% expansion
Terophon® 21301™ Rubber Heat Pre-Metal Treatment NADry extrudable / injection moldable,
expansion range 1000%
Terostat® 27006™ Rubber Heat Pre-Metal Treatment800 - 2100 kPa
Cross-Lap StrengthFuel resistant, dry extrudable / injection
moldable expansion range 300%
Pr
od
uC
tS
en
er
Gy, n
VH
, An
d
FluId
MA
nA
Ge
Me
nt
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
70
Water-Based adhesives
Water-Based acrylic Productsadhesin® Sa-7648™ – A formulated pressure-sensitive, acrylic emulsion adhesive that exhibits very high
dry tack and peel strength values. It’s a high solids adhesive product that can be applied by spray or roller coating methods and subsequently dried by convection type ovens very quickly.
adhesin® Sa-9627™ – A general purpose pressure-sensitive acrylic for bonding plastics. High tack and high solids offer quick processing and adhesion to many substrates.
adhesin® xa-7584™ Black – Laminating adhesive for flexible air duct cores is a flame-retardant, UL-recognized component (MH28702) with high tack and excellent adhesion to films; 300 cP viscosity.
adhesin® xa-7594™ Black – Laminating adhesive for flexible air duct cores is a UL-recognized component (MH28702) with high tack, water-resistance and very high shear strength; 200 cP viscosity.
adhesin® xa-7595™ Black – Laminating adhesive for flexible air duct cores is a UL-recognized component (MH28702) with high tack, water resistance and high shear strength; 150 cP viscosity.
adhesin® xa-7597™ – Laminating adhesive for flexible air duct vapor barriers is a flame retardant, UL-recognized component (MH28702) with high tack and excellent adhesion to films. Natural colored.
adhesin® xa-7597™ grey – Laminating adhesive for flexible air duct vapor barriers is a flame retardant, UL-recognized component (MH28702) with high tack and excellent adhesion to films. Grey colored.
adhesin® xa-7597LV™ – Laminating adhesive for flexible air duct vapor barriers that is a flame-retardant, UL-recognized component (MH28702) with high tack and excellent adhesion to films. Natural colored.
adhesin® xa-7598™ – Laminating adhesive for flexible air duct vapor barriers that is a flame-retardant, UL-recognized component (MH28702) and has excellent water resistance and excellent adhesion to films.
Bondmaster® 38-8731™ – A specialty, self-crosslinking pressure sensitive acrylic for use in technical laminates and the manufacture of flexible air ducts.
Bondmaster® 40-452a™ – Water-based pressure sensitive adhesive for bonding fibrous glass, jute, and other types of lightweight insulation to ductwork and to housings for air conditioning units and furnaces. Complies with requirements included in UL 2395 and UL 727.
Bondmaster® 40-514a™ – Water-based pressure sensitive adhesive suitable for bonding fibrous glass, jute, and other types of lightweight insulation to ductwork and to housings for air conditioning units and furnaces. Tinted blue in color to allow better visual inspection and control of application.
Water-Based rubber Productsadhesin® 3781™ WB Bonding adhesive – This pressure-sensitive adhesive with high tack, moderate peel
strength and excellent water resistance is designed to bond difficult substrates such as OPP, EPDM, and PE.
dorus® aW-5474™ anti-Wicking Compound – This thick, elastomeric coating seals cutouts from moisture for door and window cutouts in RVs and Manufactured Houses, and has excellent adhesion to all building materials.
Bondmaster® 40-0880™ – A water-based adhesive for bonding lightweight insulation to ductwork and housings for air conditioning units and furnaces. Meets requirements of NFPA 90A and NFPA 90B. Meets requirements of safety standards set in UL-2395 and UL-727; based on a maximum coverage rate of 625 square feet per gallon.
Bondmaster® 40-0881™ – A lower solids, lower viscosity modification of Bondmaster® 40-0880™. Meets the requirements of NFPA 90A and NFPA 90B.
Pr
od
uC
tS
wA
te
r-B
AS
ed
A
dH
eS
IVe
S
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
Our complete line of general industrial adhesives allows manufacturers the ability to bond a variety of different substrates under a wide range of process and environmental parameters. Our products can be applied by brush, roller coating, spray and even as contact cements to fit our customers’ assembly processes. Our formulating chemists and scientists have developed product solutions that save weight, time, energy and process complexity. The industry continues to stick with Henkel as the leader in general industrial adhesives.
71
Products
orde
r Ite
m
num
ber
Pack
age
Type
Syst
em M
edia
Ca
rrie
r
Prod
uct T
ype
avai
labl
e Co
lors
Prod
uct B
ase
Visc
osity
, cPs
% S
olid
s
WaTer-BaSed aCrYLIC ProduCTS
adhesin® Sa-7648™997945 Pail
Water-based Pressure Sensitive Natural Acrylic 1,800 631009412 Drum
adhesin® Sa-9627™ 908362 Drum Water-based Pressure Sensitive Natural Acrylic 2,000 60
adhesin® xa-7584™ Black746591 Tote
Water-based Pressure Sensitive Black Acrylic 300 571012811 Drum
adhesin® xa-7594™ Black
746689 Tote Water-based Pressure Sensitive Black Acrylic 200 55
adhesin® xa-7595™ Black746601 Tote
Water-based Pressure Sensitive Black Acrylic 150 541012805 Drum
adhesin® xa-7597™834793 Tote
Water-based Pressure Sensitive Natural Acrylic 1,500 621012808 Drum
adhesin® xa-7597™ grey746609 Tote
Water-based Pressure Sensitive Grey Acrylic 1,000 621012810 Drum
adhesin® xa-7597LV™746615 Tote
Water-based Pressure Sensitive Natural Acrylic 750 621012809 Drum
adhesin® xa-7598™832196 Tote
Water-based Pressure Sensitive Natural Acrylic 600 581013508 Drum
Bondmaster® 38-8731™
1218153 Pail
Water-based Pressure Sensitive Natural Acrylic 450 501218154 Steel Drum
1218155 Fiber Drum
1218156 Tote
Bondmaster® 40-452a™
1218380 Pail
Water-based Pressure Sensitive Natural Acrylic 300 651218381 Drum
1218382 Tote
1270386 Fiber Tote
Bondmaster®
40-514a™1218399 Pail
Water-based Pressure Sensitive Blue Acrylic 300 651218400 Tote
WaTer-BaSed ruBBer ProduCTS
adhesin® 3781™ WB Bonding adhesive
747777 Can
Water-based Pressure Sensitive Natural SB Rubber 10,000 51747778 Pail
884113 Tote
dorus® aW-5474™ anti-Wicking Compound
514766 PailWater-based Anti-wick Coating Green
PCP Rubber
10,000 52960616 Drum
Bondmaster® 40-0880™
1218314 Pail
Water-based Pressure Sensitive Light Brown SB Rubber 25,000 711218315 Steel Drum
1218316 Fiber Drum
1218318 Tote
Bondmaster® 40-0881™
1218321 Pail
Water-based Pressure Sensitive Light Brown SB Rubber 6,500 671218322 Steel Drum
1218323 Fiber Drum
1218325 Tote
Pr
od
uC
tS
wA
te
r-B
AS
ed
A
dH
eS
IVe
S
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
NEW!
NEW!
NEW!
Listed on and complies with the Canadian Domestic Substances List
72
Water-Based adhesives
Water-Based Vinyl Productsassembly adhesives
adhesin® 51-3053™ – General purpose assembly and laminating adhesive. Balanced wet tack, set speed and adhesion.
adhesin® 51-3093™ – Assembly adhesive for filter media, metal wire scrim and chipboard. Excellent wet tack, high solids, and non-blocking bonds. FDA 175.105 approved.
adhesin® 51-3130™ – Assembly adhesive for filter media, glue laps and paper-to-paper laminates. Good wet tack and water resistance.
adhesin® 51-3130H™ – Assembly adhesive for filter media, glue laps and paper-to-paper laminates. Good wet tack and water resistance.
adhesin® 51-5578™ – This product is designed for extrusion or wheel application and exhibits quick wet tack and penetration into coating. It cleans up readily, yet when dry has moderate-to-good water resistance.
adhesin® 56-5531™ – New assembly adhesive for filter media, glue laps and paper-to-paper laminates. High wet tack and set speed. Good water resistance.
adhesin® a 56-5533™ – A high solids and high viscosity spray grade adhesive for excellent holdout on highly porous surfaces such as insulation and textiles. Used for bonding facings to insulation boards in the production of ceiling tiles.
adhesin® 56-5545™ – A high solids, water-based adhesive for bonding fiberglass insulation to metal. Also used for laminating select vinyl, paper, metal, textile and nonwoven sheets to porous substrates. UL 723 Listed with 0/0 smoke and flame spread.
adhesin® LaW-2522™ – Pre-catalyzed adhesive for RF and heat-press bonding of wood and paper with very good water resistance.
aeroframe® 33-607a™ – A medium viscosity, fast setting, long open time adhesive ideal for assembling filter components made of board/nonwoven/metal substrates. Meets composition requirements of Indirect Food Additives Regulation 21CFR 175.105 “Adhesives.”
aeroframe® 40-428a™ – Especially formulated for foaming, but may be used foamed and unfoamed. A medium viscosity, fast setting, long open time adhesive. Ideal for adhesion to filter board/nonwoven/metal substrates for filter assemblies. Meets composition requirements of Indirect Food Additives Regulation 21 CFR 175.105 “Adhesives.”
aeroframe® 40-078a™ – Especially formulated for foaming, but may be used foamed and unfoamed. Ideal for filter applications requiring higher viscosity, fast setting, tacky products with adhesion to non-porous substrates. Complies with Indirect Food Additives Regulation 21 CFR 175.105 “Adhesives.”
Filter-Lok® 40-586a™ – A high tack adhesive with excellent balance of set speed and long open time. Adhesion to porous substrates.
national® 33-672a™ – High quality, very fast setting, water resistant, corrugating or paper laminating adhesive, especially where good “retack” is required. Complies with B116 Indirect Food Additives Regulation 21 CFR 175.105 “Adhesives.”
Pr
od
uC
tS
wA
te
r-B
AS
ed
A
dH
eS
IVe
S
73
Pr
od
uC
tS
wA
te
r-B
AS
ed
A
dH
eS
IVe
S
For additional product offerings to fit your specific needs, call us at: 1-800-521-1355
Products
orde
r Ite
m
num
ber
Pack
age
Type
Syst
em M
edia
Ca
rrie
r
Prod
uct T
ype
avai
labl
e Co
lors
Prod
uct B
ase
Visc
osity
, cPs
% S
olid
s
WaTer-BaSed VInYL ProduCTS
adhesin® 51-3053™513029 Tote
Water-basedGeneral Purpose
AssemblyNatural Vinyl 1,500 54
513033 Drum
adhesin® 51-3093™513079 Tote
Water-basedGeneral Purpose
AssemblyNatural Vinyl 5,500 64
513086 Drum
adhesin® 51-3130™
513096 Tote
Water-basedGeneral Purpose
AssemblyNatural Vinyl 2,000 57
513103 Drum
513104 Pail
564141 Tote
adhesin® 51-3130H™513108 Tote
Water-basedGeneral Purpose
AssemblyNatural Vinyl 4,000 57
513109 Drum
adhesin® 51-5578™513224 Tote
Water-basedGeneral Purpose
AssemblyNatural Vinyl 3,000 58
513227 Drum
adhesin® 56-5531™941610 Tote
Water-basedGeneral Purpose
AssemblyNatural Vinyl 3,000 56
1104783 Drum
adhesin® a 56-5533™ 1123825 Tote Water-based Specialty Wet-bond Natural Vinyl 27,000 72
adhesin® 56-5545™
1061456 Pail
Water-based Specialty Wet-bond Natural Vinyl 6,500 60939627 Drum
1108509 Tote
adhesin® LaW-2522™854872 Pail
Water-basedGeneral Purpose
AssemblyNatural Vinyl 4,000 38
858066 Drum
aeroframe® 33-607a™1216963 Pail
Water-based Framing Cold Glue White Vinyl 3,500 591216964 Drum
aeroframe® 40-428a™1218375 Pail
Water-based Framing Cold Glue White Vinyl 2,200 561218377 Tote
aeroframe® 40-078a™1218286 Pail
Water-based Framing Cold Glue White Vinyl 4,000 621218287 Tote
Filter-Lok® 40-586a™
1218402 Pail
Water-based Framing Cold Glue White Vinyl 1,500 301218403 Drum
1218404 Tote
national® 33-672a™
1217016 Pail
Water-based Framing Cold Glue White Vinyl 1,500 611276035 Drum
1217018 Tote
NEW!
NEW!
NEW!
NEW!
NEW!
Listed on and complies with the Canadian Domestic Substances List
74
Water-Based adhesives
Pr
od
uC
tS
wA
te
r-B
AS
ed
A
dH
eS
IVe
S
Water-Based Vinyl Products (Continued)Laminating adhesives
adhesin® 51-5654™ – Specifically designed to bond foil/scrim/kraft to OSB, and other wood surfaces. This product has excellent wet tack with fast setting speeds. Its dry film provides high heat and water resistance.
adhesin® 56-5343™ – A laminating adhesive for supporting vinyl films and fabrics to wood, MDF, particle board and other porous surfaces. It is suitable for direct roll coating with excellent wet tack properties.
adhesin® a 56-5532™ – A high solids, roll coatable laminating adhesive with superior shear strength for high performance applications. Good water resistance.
Bondmaster® 40-0857™ – Polyvinyl emulsion adhesive for laminating foil, vinyl and composite facings to glass insulation mat. Meets requirements of NFPA-90A and NFPA 90B. Roll goods manufactured with this product under the conditions set forth in Henkel’s UL Batts & Blankets listing have received FHC 25/50 UL ratings.
Bondmaster® 40-453a™ – A formulated copolymer emulsion adhesive used for bonding foil/scrim/kraft and other facings to fiberglass insulation in the manufacture of rolled goods for commercial and residential buildings.
dorus® Vetak 7747™ – Laminating adhesive for difficult-to-bond substrates. Good for vinyl sheets and coated papers.
Coating
adhesin® SIa-485B™ anti-Wick – Latex sealer designed for use in the RV industry to seal cutouts in porous substrates such as plywood from wicking moisture. It can be applied by brush or roller.
Water-Based additives and Catalystsdorus® Tancotard TB-408™ – A fine dispersion of decabromodiphenyl oxide and antimony oxide in water. Used as an additive to many
water-based adhesives and coatings to provide flame resistance.
Water-Based Polyurethane Productdorus® Permattach 396HC™ – A high performance, heat reactive, one-component polyurethane adhesive for tough elastomeric bond
applications for use in bonding rubber to leather uppers in footwear.
75
Pr
od
uC
tS
wA
te
r-B
AS
ed
A
dH
eS
IVe
S
Products
orde
r Ite
m
num
ber
Pack
age
Type
Syst
em M
edia
Ca
rrie
r
Prod
uct T
ype
avai
labl
e Co
lors
Prod
uct B
ase
Visc
osity
, cPs
% S
olid
s
WaTer-BaSed VInYL ProduCTS (Continued)
adhesin® 51-5654™513265 Tote
Water-basedGeneral Purpose
LaminatingNatural Vinyl 3,000 53
552134 Drum
adhesin® 56-5343™
553346 Pail
Water-basedGeneral Purpose
LaminatingNatural Vinyl 10,000 61
556237 Tote
608442 Drum
853556 Tote
adhesin® a 56-5532™ 1070617 Drum Water-basedGeneral Purpose
LaminatingNatural Vinyl 7,500 65
Bondmaster® 40-0857™
1218306 Pail
Water-basedGeneral Purpose
LaminatingWhite Vinyl 300 45
1218307 Steel Drum
1218308 Fiber Drum
1218311 Tote
Bondmaster® 40-453a™
1218383 Pail
Water-basedGeneral Purpose
LaminatingWhite Vinyl 800 541218384 Drum
1218385 Tote
dorus® Vetak 7747™748366 Tote
Water-basedGeneral Purpose
LaminatingNatural Vinyl 3,200 57
748367 Drum
adhesin® SIa-485B™ anti-Wick 750900 Drum Water-based Anti-wick Coating Black or White Vinyl 3,000 50
WaTer-BaSed addITIVeS and CaTaLYSTS
dorus® Tancotard TB-408™ 1010931 Drum Water-based Flame Retardant Natural Aromatic Promine 2,500 62
WaTer-BaSed PoLYureTHane ProduCT
dorus® Permattach 396HC™
854328 Pail Water-based Specialty Heat Seal Natural PUD 6,000 38NEW!
76
IeS (Integrated equipment Solutions)
IeS
Inte
Gr
Ate
d
eq
uIP
Me
nt
So
lutI
on
S
For nearly a century, Henkel has been the global leader in metal pretreatment technologies. Over the past 30 years, Henkel has designed, built and integrated advanced equipment solutions to optimize the application of metal pretreatment products, providing trusted, high quality services to its customers. We offer a complete line of application equipment, process controls, pretreatment support equipment and other specialty systems that can be easily integrated into existing manufacturing processes. Backed by this broad product range and technical expertise, Henkel is the single, comprehensive source for integrated equipment and works together with its customers to deliver solutions that fit all needs.
Henkel’s equipment systems have been used worldwide to control a range of Henkel pretreatment chemical processes, including:
Parco® cleaners Aquence® coatings
Bonderite® treatments Multan® lubes and coolants
Alodine® treatments Fixodine® conditioners
Mobility enhancers Prep-N-Cote®
Ridoline® cleaners Parcolene® sealing rinses
Henkel Integrated Equipment Solutions (IES) provide far more than leading-edge chemical process management. Customers receive technical support from the IES group to assist with equipment selection, equipment maintenance and production staff training. Henkel products, equipment and services deliver total solutions to help meet the intense quality and efficiency challenges of today’s competitive manufacturing environment.
For a complete overview of Henkel’s equipment systems, visit our website at www.equipment.henkel.us.
Process control systemsSolid State
Lineguard® 97 Solid-State Parts & Accessories
PLC-Based Lineguard® 760 Lineguard® PC 2500 Lineguard® PC 6000 PLC-Based Parts & Accessories
PC-Based Lineguard® SC 1002 SmartControl ™ System Lineguard® SC 2002 SmartControl ™ System Typical SmartControl ™ System Layout SmartControl ™ Example Control Screens Lineguard® SC 3002 SmartControl ™ System PC-Based Parts & Accessories
Pretreatment suPPort equiPmentChemical Metering Pumps
HST 1, 2, 5, 8, 25, 60 PA 1-CL Pump Lineguard® Flow Totalizer Chemical Metering Pumps Replacement Parts & Accessories
air diaphragm Pumps Air Diaphragm Pumps Replacement Parts & Accessories
Level Controls Level Control Assemblies Level Control Assemblies Replacement Parts & Accessories Bulk Level Monitoring System & Accessories Low Drum Alarm & Replacement Parts
Spray nozzles Spray Nozzle Selection Guides & Accessories Nozzle Application Drawing Bonderloc™ Nozzle Application Drawing
Coalescing oil Separators 3, 6 & 20 GPM Coalescing Oil Separators
Ion exchange Ion Exchange Optional Spare Parts Lineguard® Ion Exchange 871 System
test equiPment & Data management systemsLineguard® 101D Meter & Options Lineguard® Data Monitoring System Lineguard® DocSys™ System
equiPment fielD service suPPortEquipment Field Service Support and Contact Information
77
Equipment Field Service SupportThe equipment group offers many different services; one is sure to fit your needs. Below is the list of services we can perform for you:
Help Desks for Process & Equipment Troubleshooting•
Field Service for On-Site Support•
Sales Support for Customer Problem Resolution•
Service and Preventive Maintenance Contracts•
Equipment Calibration Certifications for ISO•
Per Diem Service Visits•
Equipment Audits•
Line Audits (for Equipment)•
Equipment Training•
Remote Access to Equipment / Systems for Diagnosing •and Resolving Issues
Note: Top nozzles 80° spray angle for full coverage.
Selection of spray angles based on largest silhouette through washer.
Offset nozzles on alternate risers to ensure complete coverage.
Note overlap of spray pattern: see Detail A.
Note minimum recommended spray distance.
9" (23 cm)
IeS
Inte
Gr
Ated
e
qu
IPM
en
t So
lutIo
nS
Contact Information:
Equipment Help Desk: 1-800-391-4740•
Equipment Help Desk Fax: 248-589-4629•
78
Multan® 5005M™ – A chlorinated soluble oil coolant for ferrous and non-ferrous applications where extreme pressure additives are needed.
Multan® 8304™ – A synthetic coolant that will absorb oil for additional lubricity. Suitable for ferrous and most aluminum alloys.
Multan® B Series – Fluids are bio-resistant, semi-synthetic lubricants with extreme pressure and lubricity additives used for light-to-heavy applications, designed for machining and grinding ferrous and aluminum alloys.
Multan® B-200™ – This semi-synthetic, bio-resistant, all-purpose product is suitable on ferrous and aluminum materials and provides first-rate machine and part cleanliness qualities.
Multan® CR Series – These metal-removing straight oils provide a durable product for light-to-heavy applications.
Multan® CR 20™ – This high viscosity straight oil used in grinding and machining operations is also applicable in tool grinding applications.
Multan® CR 67™ – This light viscosity straight oil, used in grinding and light machining operations, is also applicable in tool grinding applications.
Multan® DFL 55 HS™ – This dry film lubricant is a micro-wax dispersion used in heavy forming operations and is dry to the touch after processing.
Multan® F 737™ – This synthetic, light duty forming lubricant is ideal for replacing high-VOC vanishing oil applications.
Multan® F 750™ – This synthetic lubricant contains a temperature-activated polymer and is ideal for applications where metal temperatures rise due to the type of operation.
Multan® F 927F™ – This high viscosity soluble oil product is suitable for heavy forming operations on all metal types.
Multan® F 1009™ – A superb high performance synthetic product for heavy drawing of ferrous metals, including stainless steel, leaving a fluid-type residue.
Multan® F 7160™ – Synthetic forming fluid with excellent high performance product for heavy drawing of ferrous metals.
Multan® PL 198™ – This highly viscous oil-based material used in hydro-forming and extreme forming operations can be used in conjunction with our OEM-approved pressure side fluids.
Multan® PL 633™ – This light duty, 120ºF flash vanishing oil is ideal for operations where the stampings are not washed after the operation.
Multan® PL Prelube MP 404™ – This oil-based product is ideal for non-ferrous forming operations where a mix of ferrous materials can also be found.
P3® 15™ Hot Stripper Additive – Especially formulated for use in highly alkaline solutions to assist in the removal of paint.
P3® 40™ Tire Lube – An odorless, very slightly viscous, liquid material specifically formulated to possess lubrication properties.
P3® 50™ Hot Stripper – Especially formulated for immersion or spray application on painted steel surfaces.
Pr
od
uC
tS
Ad
dIt
Ion
Al
S
uP
Po
rtI
nG
Pr
od
uC
tS
additional Supporting Products
79
P3® 200™ Paint Line Cleaner – This non-methylene chloride, alkaline, zero VOC-based, non-combustible product is used for cleaning internally the re-circulating paint lines for waterborne and solvent-borne paint systems and was specially developed to be compatible with all types of fluoroelastomer seals.
P3® 301™ Stripper – Diphase, solvent paint stripper for removing heavy paint builds from aluminum, steel and various soft metals.
P3® 2247™ Tacky Oven Coating – A polymeric-based coating formulated for use in high temperature paint ovens.
P3® 2455™ Baffle Coating – A green, petroleum-based, water-resistant coating for protecting baffles, back sections, stacks, metal, concrete and any other wet areas. Removed manually or by high-pressure spray wash.
P3® 2469™ With Tacky Masking – A white, water-based coating for applying to paint spray booth walls and floors with tackiness to trap airborne dirt and reduce paint defects on parts. Water removable by high-power, cold-water spray.
P3® 2485A™ Clear Masking – A colorless, water-based coating for protecting paint spray-booth walls and floors from over-sprayed paint, and is water removable by high-power, cold-water spray.
P3® 2488B™ Protective Coating – This water-based, zero-VOC, alkaline removable polymeric material is designed for application on aluminum, steel, plastic and many other substrates.
P3® 2495™ Hi-Lite – Petroleum-based, colorless, odorless, body-in-white highlighting material, used to locate surface defects on metal parts prior to pretreatment.
P3® Neutracare® 5175™ – This phosphated neutral cleaner with in-process corrosion prevention is designed to be used at a moderate temperature (120°F-160°F). For use on ferrous alloys only.
P3® Parco® 100 AWS™ – A water-based, body-in-white, anti-weld spatter agent material.
P3® Peelables – Water-based and solvent-based peelable protective coatings used for temporary protection of parts, spray booths and equipment.
P3® Polyprep® Shield Coating – A unique product in the industry that forms a thin, temporary protective film over fresh, tender plastic parts.
P3® Pre-Saturated Wipes – A variety of cloth wipe products are available that are pre-saturated with products such as Parcosol® purge cleaner, P3® Hi-Lite products, Alodine® and Bonderite® pretreatments, and Polyprep® plastic cleaners.
Pr
od
uC
tS
Ad
dItIo
nA
l S
uP
Po
rtIn
G P
ro
du
CtS
80
IndexP
ro
du
Ct
SIn
de
x
06-1201™ ........................... Terostat® 06-1201™ ...........................................................66, 67 06-1242™ ........................... Terostat® 06-1242™ ...........................................................66, 67 06-1272™ ........................... Terostat® 06-1272™ ...........................................................66, 67 06-1273™ ........................... Terostat® 06-1273™ ...........................................................68, 69 16-192B™ ........................... Macromelt® TPX 16-192B™ ................................................48, 49 16-333B™ ........................... Macromelt® TPX 16-333B™ ................................................48, 49 33-607A™ ........................... Aeroframe® 33-607A™ .......................................................72, 73 33-672A™ ........................... National® 33-672A™ ..........................................................72, 73 34-159B™ ........................... Filter-Lok® 34-159B™.........................................................48, 49 34-268D™ ........................... Purmelt® Purge 34-268D™ .................................................52, 53 34-342B™ ........................... Instant-Lok® 34-342B™ ......................................................50, 51 34-412B™ ........................... Filter-Lok® 34-412B™.........................................................50, 51 34-491C™ ........................... Versa-Weld™ 34-491C™ ...................................................50, 51 34-771C™ ........................... Filter-Lok® 34-771C™.........................................................50, 51 34-772C™ ........................... Ultra-Melt® 34-772C™ ........................................................50, 51 34-780C™ ........................... Filter-Lok® 34-780C™.........................................................50, 51 34-785A™ ........................... Purmelt® Cleaner 34-785A™ ..............................................52, 53 34-870C™ ........................... Filter-Lok® 34-870C™.........................................................50, 51 34-947C™ ........................... Filter-Lok® 34-947C™.........................................................50, 51 34-967C™ ........................... Filter-Lok® 34-967C™.........................................................50, 51 34-1214™ ........................... Uni-Flex™ 34-1214™ ........................................................50, 51 34-2631™ ........................... Instant-Lok® 34-2631™ ......................................................50, 51 34-2635™ ........................... Instant-Lok® 34-2635™ ......................................................50, 51 34-2787™ ........................... Instant-Lok® 34-2787™ ......................................................50, 51 34-3182™ ........................... Purmelt® Purge 34-3182™ .................................................52, 53 34-3412™ ........................... Hyperm™ 34-3412™ .........................................................48, 49 34-4955™ ........................... Kan-Tak® 34-4955™...........................................................50, 51 38-8731™ ........................... Bondmaster® 38-8731™ .....................................................70, 71 40-078A™ ........................... Aeroframe® 40-078A™ .......................................................72, 73 40-428A™ ........................... Aeroframe® 40-428A™ .......................................................72, 73 40-452A™ ........................... Bondmaster® 40-452A™............................................... 10, 70, 71 40-453A™ ........................... Bondmaster® 40-453A™.....................................................74, 75 40-514A™ ........................... Bondmaster® 40-514A™.....................................................70, 71 40-586A™ ........................... Filter-Lok® 40-586A™ .........................................................72, 73 40-0857™ ........................... Bondmaster® 40-0857™ .....................................................74, 75 40-0880™ ........................... Bondmaster® 40-0880™ ............................................... 10, 70, 71 40-0881™ ........................... Bondmaster® 40-0881™ .....................................................70, 71 51-3053™ ........................... Adhesin® 51-3053™ ...........................................................72, 73 51-3093™ ........................... Adhesin® 51-3093™ ...........................................................72, 73 51-3130H™ ......................... Adhesin® 51-3130H™ .........................................................72, 73 51-3130™ ........................... Adhesin® 51-3130™ ...........................................................72, 73 51-5578™ ........................... Adhesin® 51-5578™ ...........................................................72, 73 51-5654™ ........................... Adhesin® 51-5654™ ...........................................................74, 75 56-5343™ ........................... Adhesin® 56-5343™ ...........................................................74, 75 56-5531™ ........................... Adhesin® 56-5531™ ....................................................... 8, 72, 73 56-5545™ ........................... Adhesin® 56-5545™ ....................................................... 6, 72, 73 80-8309™ ........................... Technomelt® 80-8309™ .....................................................50, 51 80-8368™ ........................... Technomelt® 80-8368™ .....................................................50, 51 80-8448™ ........................... Technomelt® 80-8448™ .....................................................50, 51 80-8633™ ........................... Technomelt® 80-8633™ .....................................................50, 51 80-8697™ ........................... Technomelt® 80-8697™ .....................................................50, 51 80-8707™ ........................... Technomelt® 80-8707™ .....................................................48, 49 80-8795™ ........................... Technomelt® 80-8795™ .....................................................48, 49 80-8797™ ........................... Technomelt® 80-8797™ .....................................................48, 49 80-8804™ ........................... Technomelt® 80-8804™ .....................................................50, 51 80-8884™ ........................... Technomelt® 80-8884™ .....................................................50, 51 82-072A™/82-072B™ ........ Filter-Lok® 82-072A™/82-072B™ ......................................62, 63 82-178A™/82-178B™ ........ Filter-Lok® 82-178A™/82-178B™ ......................................62, 63 82-180A™/82-180B™ ........ Filter-Lok® 82-180A™/82-180B™ ......................................62, 63 82-201A™/82-180B™ ........ Filter-Lok® 82-201A™/82-180B™ ......................................62, 63 82-226A™/82-226B™ ........ Filter-Lok® 82-226A™/82-226B™ ......................................62, 63 82-413A™/82-413B™ ........ Filter-Lok® 82-413A™/82-413B™ ......................................62, 63 82-425A™/82-425B™ ........ Filter-Lok® 82-425A™/82-425B™ ......................................62, 63 84-8843™ ........................... Technomelt® 84-8843™ .....................................................48, 49 86-7110™ ........................... Sanicare® 86-7110™ ..........................................................50, 51 86-8845™ ........................... Technomelt® 86-8845™ .....................................................50, 51 86-8848™ ........................... Technomelt® 86-8848™ .....................................................50, 51 91-004A™ ........................... Purmelt® 91-004A™ ...........................................................52, 53 91-194B™ ........................... Purmelt® 91-194B™ ...........................................................52, 53 91-798A™ ........................... Purmelt® 91-798A™ ...........................................................52, 53 91-822A™ ........................... Purmelt® Purfect Glaze 91-822A™ ................................ 22, 52, 53 91-831B™ ........................... Purmelt® 91-831B™ ...........................................................52, 53 91-834A™ ........................... Purmelt® 91-834A™ ...........................................................52, 53 91-913A™ ........................... Purmelt® 91-913A™ ...........................................................52, 53 99X™ .................................. Parcolene® 99X™......................................................................35 101™ .................................. Multan® PL 101™ .....................................................................47
104™ .................................. P3® 104™ Saf-T-Clean .............................................................41 110™ Cleaner ...................... P3® Polyprep® 110™ Cleaner ...................6, 14, 18, 22, 24, 26, 40 110™ Cold Stripper ............. P3® 110™ Cold Stripper ............................................................41 116™ .................................. P3® 116™ Saf-T-Clean .............................................................41 182A™ ................................ Aquence® 182A™ ...............................................................36, 37 182B™ ................................ Deoxidine® 182B™ ...................................................................29 200™ .................................. Parco® Spray Wand 200™ .........................................................32 200WB™ ............................. P3® 200WB™ Paint Line Cleaner ...............................................40 200WB™ Stripper ................ P3® 200WB™ Stripper ..............................................................41 205™ .................................. P3® Polyprep® Rinse 205™ .......................................................40 220-WB™ ............................ Parco® Cleaner 220-WB™ .........................................................46 222™ .................................. P3® 222™ Rik ...........................................................................41 283™ .................................. P3® Parcosol® 283™ Wipes ................................................18, 41 305™ .................................. Parco® Cleaner 305™ ...............................................................28 319™ .................................. Parco® Cleaner 319™ ...............................................................28 396HC™ .............................. Dorus® Permattach 396HC™ ...............................................74, 75 400™ .................................. P3® Polyprep® Rinse 400™ .......................................................40 407™ .................................. Alodine® 407™ .........................................................................34 412™ .................................. Ridoline® 412™ ........................................................................28 500 LT™ .............................. Prep-N-Cote® 500 LT™ .............................................................32 501™ .................................. P3® Prevox 501™ .....................................................................47 505™ .................................. P3® Prevox 505™ .....................................................................47 577WB™ ............................. P3® Parcosol® 577WB™............................................................40 866IX™ ................................ Aquence® 866IX™ ....................................................................38 866™ .................................. Aquence® 866™ .......................................................................38 908-38™ ............................. Eccobond® 908-38™ ..........................................................64, 65 915IX™ ................................ Aquence® 915IX™ ....................................................................38 915™ .................................. Aquence® 915™ .......................................................................38 925G™ ................................ Aquence® 925G™ .....................................................................38 930™ .................................. Aquence® 930™ ................................................. 4, 12, 14, 24, 38 960H™ ................................ Terostat® 960H™ ................................................................66, 67 962-US™ ............................. Terostat® 962-US™ .............................................................66, 67 1030HX-01™ ....................... Terocore® 1030HX-01™ ......................................................68, 69 1070™ ................................ Bonderite® 1070™ ....................................................................32 1090™ ................................ Bonderite® 1090™ ....................................................................32 1297™ ................................ Terostat® 1297™ ................................................................66, 67 1500™ ................................ Alodine® 1500™ .......................................................................34 1600™ ................................ Alodine® 1600™ .......................................................................34 1772™ ................................ Aquence® Cleaner 1772™ ...................................................36, 37 1811™ ................................ Terocore® 1811™ ...............................................................68, 69 2010™ ................................ Bonderite® 2010™ ....................................................................33 2101™ ................................ Bonderite® 2101™ ....................................................................33 2102™ ................................ Terostat® 2102™ AC/BC™ ..................................................66, 67 2150™ ................................ Aquence® 2150™ .....................................................................39 2226™ ................................ P3® 2226™ Maintenance Cleaner .............................................41 2227A™ .............................. P3® 2227A™ Oven Cleaner .......................................................41 2250UF™ ............................ P3® 2250UF™ E-Coat Cleaner...................................................41 2255™ ................................ P3® 2255™ E-Coat Cleaner.......................................................41 2280™ ................................ P3® Parco® 2280™ Cleanup ......................................................41 2300™ ................................ Terokal® 2300™..................................................................58, 59 2384™ ................................ Macromelt® 2384™ ............................................ 8, 16, 24, 48, 49 2400™ ................................ Terokal® 2400™..................................................................58, 59 2451™ ................................ P3® Baffle Coating 2451™ ........................................................41 2474™ ................................ P3® 2474™ Peelable Masking ...................................................41 2484™ ................................ P3® Clear Masking 2484™ ........................................................41 2486™ ................................ P3® 2486™ Peelable Masking ...................................................41 2498™ ................................ P3® 2498™ Peelable Masking ...................................................41 2520™ ................................ Parco® Purge 2520™ ................................................................29 2530™ ................................ Parco® Cleaner 2530™ .............................................................29 2592™ ................................ Aquence® 2592™ ...............................................................36, 37 2599™ ................................ Aquence® 2599™ ...............................................................36, 37 2600™ ................................ Aquence® 2600™ ...............................................................36, 37 2600™ Alodine® .................. Alodine® 2600™ .......................................................................34 2615™ ................................ P3® Polyprep® 2615™ Cleaner ..................................................40 2751™ ................................ Terophon® 2751™ ..............................................................68, 69 2761™ ................................ Terostat® 2761™ ................................................................22, 26 2810™ ................................ Aquence® 2810™ ...............................................................36, 37 2819™ ................................ Aquence® Cleaner 2819™ ...................................................36, 37 2860™ ................................ Aquence® 2860™ ...............................................................36, 37 3005™ ................................ Terokal® 3005™..................................................................58, 59 3105™ ................................ Multan® 3105™ ..................................................................42, 43 3293™ ................................ P3® Polyprep® 3293™ Cleaner ..................................................40 3416™ ................................ Aquence® 3416™ .....................................................................39 3781™ ................................ Adhesin® 3781™ WB Bonding Adhesive ..............................70, 71 4000-F™ ............................. Terostat® 4000-F™ .............................................................66, 67 4141™ ................................ P3® Prevox 4141™ ...................................................................47
81
Pr
od
uC
tS
Ind
ex
4555B™ .............................. Terokal® 4555B™ ............................14, 16, 18, 24, 58, 59, 68, 69 4595™ ................................ Alodine® 4595™ .......................................................................34 5011™ ................................ Terokal® 5011™..................................................................58, 59 5088™ ................................ P3® Neutracare® 5088™ ...........................................................46 5089™ ................................ Terokal® 5089™..................................................................58, 59 5175™ ................................ P3® Neutracare® 5175™ ...........................................................46 5200™ ................................ Alodine® 5200™ .......................................................................34 5600D™ .............................. Multan® 5600D™ ................................................................42, 43 5700™ ................................ Alodine® 5700™ .................................................................24, 34 5800™ ................................ P3® Prevox 5800™ ...................................................................47 6072™ ................................ Macromelt® 6072™ ............................................................48, 49 6100G™ .............................. Terostat® 6100G™ ..............................................................66, 67 6208S™ .............................. Macromelt® 6208S™ .................................................... 22, 48, 49 6211™ ................................ Macromelt® 6211™ ............................................................48, 49 6239™ ................................ Macromelt® 6239™ ............................................................48, 49 7005™ ................................ Aquence® 7005™ ...............................................................36, 37 7150™ ................................ Aquence® 7150™ ...............................................................36, 37 7310™ ................................ Aquence® 7310™ ...............................................................36, 37 7320™ ................................ Aquence® 7320™ ...............................................................36, 37 7747™ ................................ Dorus® Vetak 7747™ ..........................................................74, 75 9069™ ................................ Macromelt® 9069™ ............................................................48, 49 9103™ ................................ Multan® 9103™ ..................................................................42, 43 10004™ .............................. Terostat® 10004™ ..............................................................68, 69 10102™ .............................. Terostat® 10102™ ..............................................................68, 69 13003™ .............................. Terostat® 13003™ ..............................................................68, 69 15101™ .............................. Terostat® 15101™ ..............................................................68, 69 16301™ .............................. Terocore® 16301™ .............................................................68, 69 18101™ .............................. Terophon® 18101™ ............................................................68, 69 19004™ .............................. Terostat® 19004™ ..............................................................68, 69 20003™ .............................. Terocore® 20003™ .............................................................68, 69 20101™ .............................. Terocore® 20101™ .............................................................68, 69 21007™ .............................. Terophon® 21007™ ........................................................ 4, 68, 69 21301™ .............................. Terophon® 21301™ ............................................................68, 69 22100™ .............................. Terophon® 22100™ ............................................................68, 69 23100™ .............................. Terophon® 23100™ ............................................................68, 69 27006™ .............................. Terostat® 27006™ ..............................................................68, 69 A 56-5532™ ........................ Adhesin® A 56-5532™ ........................................................74, 75 A 56-5533™ ........................ Adhesin® A 56-5533™ ........................................................72, 73 A-304-6™ ........................... Eccobond® A-304-6™ .........................................................64, 65 A-304-40™ ......................... Eccobond® A-304-40™ .......................................................64, 65 A-316-20™ ......................... Eccobond® A-316-20™ .......................................................64, 65 A-316-30™ ......................... Eccobond® A-316-30™ .......................................................58, 59 A-316-43™ ......................... Eccobond® A-316-43™ .......................................................64, 65 A-316™ ............................... Eccobond® A-316™ ............................................................64, 65 A-329-1™ ........................... Eccobond® A-329-1™ .........................................................58, 59 A-359™ ............................... Eccobond® A-359™ ............................................................58, 59 A-500™ ............................... Deoxidine® A-500™ ..................................................................29 AW-5474™ .......................... Dorus® AW-5474™ Anti-Wicking Compound .......................70, 71 B-204™ ............................... Multan® B-204™ ...................................................... 4, 16, 42, 43 B-236™ ............................... Multan® B-236™ ................................................................42, 43 B-400™ ............................... Multan® B-400™ .............................................. 12, 14, 26, 42, 43 B-414™ ............................... Multan® B-414™ .......................................................... 16, 42, 43 Cleaner 2 .............................. Purmelt® Cleaner 2 ..............................................................52, 53 CR 10™ ............................... Multan® CR 10™ .................................................................42, 43 CR 26™ ............................... Multan® CR 26™ .................................................................42, 43 E2™..................................... Aquence® E2™ .........................................................................39 E3™..................................... Aquence® E3™ .........................................................................39 E3030™............................... Bondmaster® E3030™ ........................................................64, 65 E3346™............................... Bondmaster® E3346™ ........................................................64, 65 E3520™............................... Bondmaster® E3520™ ........................................................64, 65 EC2™ .................................. Alodine® EC2™ ......................................10, 12, 14, 16, 22, 26, 34 EM-357US™ ........................ Technomelt® EM-357US™ ..................................................50, 51 EM-377US™ ........................ Technomelt® EM-377US™ ..................................................50, 51 ETP 3400™ .......................... Bondmaster® ETP 3400™ ...................................................64, 65 F 981ND™ ........................... Multan® F 981ND™ .............................................................44, 45 F 985™ ................................ Multan® F 985™ ............................................................. 8, 44, 45 F 2004™ .............................. Multan® F 2004™ ............................................. 14, 16, 22, 44, 45 F 4510™ .............................. Multan® F 4510™ ...............................................................44, 45 F 4768™ .............................. Multan® F 4768™ ...............................................................44, 45 F 6740™ .............................. Multan® F 6740™ ........................................................... 6, 44, 45 F 7270™ .............................. Multan® F 7270™ ...............................................................44, 45 HCS10™ .............................. Parco® Cleaner HCS10™ ...........................................................28 LAW-2522™ ........................ Adhesin® LAW-2522™ ........................................................72, 73 LT-10™ ................................ Parco® Lubrite® LT-10™ ............................................................33 MS 930™ ............................ Terostat® MS 930™ ...................................4, 6, 22, 60, 61, 68, 69 MS 935™ ............................ Terostat® MS 935™ ................................................ 60, 61, 68, 69
MS 939™ ............................ Terostat® MS 939™ .......................................... 26, 60, 61, 68, 69 MS 9360™ .......................... Terostat® MS 9360™ ..........................................................60, 61 MS 9371™ .......................... Terostat® MS 9371™ ..........................................................60, 61 MS 9380™ .......................... Terostat® MS 9380™ ..........................................................60, 61 MS 9399™ .......................... Terostat® MS 9399™ ..........................................................60, 61 M™...................................... Fixodine® M™ ...........................................................................30 NT-1™ ................................. Bonderite® NT-1™ ................... 4, 6, 10, 14, 16, 18, 22, 24, 26, 31 PL 298™ .............................. Multan® PL 298™ ......................................................... 16, 44, 45 PL 1439™ ............................ Multan® PL 1439™ ....................................................... 10, 44, 45 Q 80-8668™ ........................ Technomelt® Q 80-8668™ ..................................................50, 51 Q 5613™ ............................. Macromelt® Q 5613™ .........................................................50, 51 QR-4663™ .......................... Purmelt® QR-4663™ ..................................................... 22, 52, 53 QR-4668™ .......................... Purmelt® QR-4668™ ...........................................................52, 53 R-200F+™ .......................... Purmelt® R-200F+™ ...........................................................52, 53 R-246C™ ............................. Purmelt® R-246C™ .............................................................52, 53 R-607™ ............................... Purmelt® R-607™ ...............................................................52, 53 R-608C™ ............................. Purmelt® R-608C™ .............................................................52, 53 R-623™ ............................... Purmelt® R-623™ ...............................................................52, 53 R-629™ ............................... Purmelt® R-629™ ...............................................................52, 53 R-630™ ............................... Purmelt® R-630™ ...............................................................52, 53 R-633™ ............................... Purmelt® R-633™ ...............................................................52, 53 RT-153™ ............................. Ridoline® RT-153™ ...................................................................28 RT-163™ ............................. Ridoline® RT-163™ ...................................................................28 RT-173s™ ........................... Ridoline® RT-173s™ .................................................................28 RT-173™ ............................. Ridoline® RT-173™ ...................................................................28 SA-463™ ............................. Terostat® SA-463™ .............................................................66, 67 SA-490™ ............................. Terostat® SA-490™ .............................................................66, 67 SA-491™ ............................. Terostat® SA-491™ .............................................................66, 67 SA-4510™ ........................... Terostat® SA-4510™ ...........................................................66, 67 SA-7648™ ........................... Adhesin® SA-7648™ ...........................................................70, 71 SA-9627™ ........................... Adhesin® SA-9627™ ...........................................................70, 71 SIA-110™ ............................ Macroplast® SIA-110™ ................................................. 18, 56, 57 SIA-111™ ............................ Macroplast® SIA-111™ .......................................................56, 57 SIA-113SHV™ ...................... Macroplast® SIA-113SHV™ .................................................56, 57 SIA-114™ ............................ Macroplast® SIA-114™ .......................................................56, 57 SIA-115™ ............................ Macroplast® SIA-115™ .......................................................56, 57 SIA-116™ ............................ Macroplast® SIA-116™ .......................................................56, 57 SIA-117™ ............................ Macroplast® SIA-117™ .......................................................56, 57 SIA-119™ ............................ Macroplast® SIA-119™ .......................................................56, 57 SIA-485B™ .......................... Adhesin® SIA-485B™ Anti-Wick ..........................................74, 75 T 5900™.............................. Alodine® T 5900™.....................................................................34 TB-408™ ............................. Dorus® Tancotard TB-408™ ................................................74, 75 TecTalis®............................... Bonderite® TecTalis® ........................................................ 8, 10, 31 UK-1340™ ........................... Macroplast® UK-1340™ ................................................ 26, 56, 57 UK-5401™ ........................... Macroplast® UK-5401™ ................................................ 26, 56, 57 UK-8103™ & UK-5400R™ .. Macroplast® UK-8103™ & UK-5400R™ .................. 56, 57, 62, 63 UR 8224S™ ......................... Macroplast® UR 8224S™ ....................................................56, 57 UR-8229L™ ......................... Macroplast® UR-8229L™ ....................................................56, 57 UR-8331™ ........................... Macroplast® UR-8331™ ......................................................56, 57 UR-8332™ ........................... Macroplast® UR-8332™ ......................................................56, 57 UR-8340™ ........................... Macroplast® UR-8340™ ......................................................54, 55 UR-8341™ ........................... Macroplast® UR-8341™ ......................................................54, 55 UR-8342™ ........................... Macroplast® UR-8342™ ......................................................54, 55 UR-8343™ ........................... Macroplast® UR-8343™ ......................................................54, 55 UR-8344™ ........................... Macroplast® UR-8344™ ......................................................54, 55 UR-8345D™ ........................ Macroplast® UR-8345D™....................................................54, 55 UR-8345™ ........................... Macroplast® UR-8345™ ......................................................54, 55 UR-8346™ ........................... Macroplast® UR-8346™ ......................................................54, 55 UR-8347™ ........................... Macroplast® UR-8347™ ......................................................54, 55 UR-8348™ ........................... Macroplast® UR-8348™ ......................................................54, 55 UR-8349™ ........................... Macroplast® UR-8349™ ......................................................54, 55 XA-7584™ ........................... Adhesin® XA-7584™ Black .................................................70, 71 XA-7594™ ........................... Adhesin® XA-7594™ Black ........................................... 10, 70, 71 XA-7595™ ........................... Adhesin® XA-7595™ Black .................................................70, 71 XA-7597LV™ ....................... Adhesin® XA-7597LV™ .......................................................70, 71 XA-7597™ ........................... Adhesin® XA-7597™ ..................................................... 10, 70, 71 XA-7597™ Grey ................... Adhesin® XA-7597™ Grey ...................................................70, 71 XA-7598™ ........................... Adhesin® XA-7598™ ...........................................................70, 71 X™ ...................................... Prepalene™ X™ .......................................................................30 ZM-1™ ................................ Bonderite® ZM-1™ ....................................................................33 ZM-2™ ................................ Bonderite® ZM-2™ ....................................................................33 ZX-1™ ................................. Parco® Cleaner ZX-1™ ..............................................................28 ZX-3™ ................................. Parco® Cleaner ZX-3™ ..............................................................28
Henkel Corporation32100 Stephenson HighwayMadison Heights, MI 48071u.S.A.www.henkelna.com/industrial
® and TM designate trademarks of Henkel Corporation or its Affiliates. ® = registered in the U.S. Patent & Trademark Office. © 2009, Henkel Corporation. All rights reserved. 5824 LT-5142 07/2009
USAFor technical assistance, call 866.332.7024
For technical data sheets, visit www.henkelna.com/tds or call 866.332.7024
For MSDS’s, visit www.henkelna.com/industrialmsds or call 248.583.9300, ext 4.
To place an order, check order status or inquire about product availability, call 800.521.1355 or send an e-mail to [email protected]
Henkel Corporation 1001 Trout Brook Crossing Rocky Hill, CT 06067 Tel: 860.571.5100 Fax: 860.571.5465
Henkel Corporation 32100 Stephenson Highway Madison Heights, MI 48071 Tel: 248.583.9300 Fax: 248.583.7024
CAnAdAFor technical assistance, call 905.814.6511, ext 7406
For technical data sheets, visit www.henkelna.com/tds or call 905.814.6511
For MSDS’s, visit www.henkelna.com/industrialmsds or call 905.814.6511
To place an order, check order status or inquire about product availability, call 800.263.5043 or send an e-mail to [email protected]
Henkel Canada Corporation 2225 Meadowpine Boulevard Mississauga, Ontario L5N 7P2 Tel: 905.814.6511 Fax: 905.814.5391